gearbox and deck assembly index - zot · pdf filegearbox and deck assembly index cam follower...

28

6

Gearbox &

DeckAssem

bly 35

Gearbox and Deck AssemblyIndex

Cam Follower ShaftSupport BracketFor ‘A2’, Jetback and Straight

‘A’ Pinsetters

# 420502Prevents Crisis Breakdowns:Installing ZOT’s Cam Follower Shaft SupportBracket “Today” prevents interruptions(breakdowns) during peak/league times“Tomorrow”.

ZOT’s Cam Follower Shaft Support BracketSecures the Moving Deck Cam Follower formonths after the Cap Screw (“B” Bolt) hasbroken: thereby preventing “CrisisBreakdown” at the least opportune time.Prevents Damage to expensive 1 to 1 plates (part # 12-100207-000).Prolongs the Life of the Cap ScrewFlexible Maintenance Schedule repairs can bescheduled when time permits, and not duringpeak bowling times.

** Every Brunswick Pinsetter Should Have One **

Support Bracket1 to1 Plate Detector Plate

“B” BoltReplacement

Gearbox Housing

Shaft

Moving DeckCam Follower

AdditionalCollar - includedwith kit

Numeric call-outs (e.g. ) = page number3

Gearbox and Deck Assembly

6

Gea

rbox

& D

eck

Asse

mbl

y

29Call ZOT at 1-800-525-8116 for more details

Deck Right Deck SaverFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420084

Scissor Spring Pivot Repair KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420285Features and BenefitsNo Welding Required: Simply drill and bolt on the ZOT ScissorSpring Pivot Repair Kit for an easy and permanent repair.Labor and Time Saving: A much faster repair than removing thestationary deck for rework. The ZOT Repair Kit installs in minutes.Prevent Crisis Breakdowns: Why wait? If your decks are worn atthe scissor spring eyelet, install ZOT’s repair kit – today; andprevent league interruptions – tomorrow!

Features and Benefits

Reduce Respots of 5-8-9 Pins: If the pinset-ter often sweeps off the 5, 8 or 9 pins,instead of resetting them for the secondball, the deck is probably crowned. Astraight edge will soon confirm this (seeillustration). The ZOT Deck Right Deck Saverwill permanently eliminate the crown,restoring your deck to maximum efficiency.

Minimizes Deck Shift Problems: If the deckdoes not shift freely (the tell-tale signs arerub marks, made by the pulley, on theinside of the Geneva Plates), the ZOT DeckRight Deck Saver offers a simple and per-manent solution.

No More Need for CostlyReplacement…Removal -or- Welding ofDecks: And shimming deck pads to makethem thicker will eventually crack them.

Permanent Repair

Use straight edge to check for crown on deck.

30


6

Gearbox &

DeckAssem

bly

Replacement Deck ShieldFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#620154


If Your Deck-Shields Are Beyond Repair:Why not replace them and upgrade theimage of your center in the process.

Standard Gray: Direct replacement deck-shield’s are of the finest quality available.

And, For An Added Touch of ImageEnhancement: Have a local silk screeneradd your center name or logo to the newdeck-shield before you install.

Deck Shield Repair KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420038


Big Cost Savings: The ZOT Deck Shield Repair Kit effectively renewsworn mounting slots on your existing shield: A far less expensiveoption than replacing the whole shield.

Installs in Less Than 15 Minutes: ZOT’s Deck Shield RepairKit is simple to install and will secure your deck shield –without having to remove it from the Pinsetter.

Note: The Complete Kit includes all mounting hardware.



6

Gea

rbox

& D

eck

Asse

mbl

y


Eliminates Rake LinkReplacement: Never again willyou need to replace a bent rakelink. ZOT’s unique Spring-Loaded Collapsible Rake Linkreturns to full-length – automat-ically; should the rake beimpacted by a ball, or dropbehind the deck.

Extended Life: ZOT’s ShockAbsorbing design extends thelife of the rake shaft weldmet,the 4 to 1 crankshaft, the key;and other related parts.

Prevents Crisis Breakdowns:The ZOT Collapsible Rake Link isdesigned and built for no downtime.

A ZOT Original Product: That’soften imitated by other manu-facturers, but never surpassed!

40'' (1.016M) Tapered End Rod#420008

Collapsible Rake LinkFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

Starter Bellcrank StudFor Straight ‘A’ Pinsetters

#420014


Eliminates Next to Impossible Drilling: PivotStud broken or loose inside the gearboxhousing? No problem! With the ZOT StarterBellcrank Stud you simply leave the brokenstud inside and re-support the pivot studfrom the housing to the 4 to 1 flange; andeliminating almost impossible repair bydrilling the gearbox housing.

Proper Pivot Positioning Automatically:With the ZOT Starter Bellcrank Stud there isno misalignment to damage trigger sensitivity.

Permanent Repair: Restores to like newworking condition.

ImprovedFeature

Resupport Pivot Stud

40-7/8'' (1.038M) Straight End Rod#420009

32


6

Gearbox &

DeckAssem

bly

Gearbox Clutch Bearing Assembly KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420048


Reduced Maintenance: ZOT’s RollerBearings are permanently lubricated forextended life and reduced maintenance.

Compatible: Buy the complete kit, or anyof the three component parts separately.The bushing, bearing and retainer discare all interchangeable with the originalmanufacturers parts.

Extended Life: The ZOT improved designfeatures a 4-hole, high tensile strengthBronze, bushing which substantially min-imizes wear and permits re-positioning ofthe dowel pin – up to 4-times – forextended life.

Clutch Yoke Screw ConversionFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420034


Big Time Saver: The ZOT Clutch YokeScrew Conversion will save you upwardsof 28-minutes anytime you have toaccess the clutch spline or rotor disc.The original screw alone takes about 15

minutes to reinstall because of the longthreads and difficulty in accessing andpositioning the pivot pin.

Installs in One Minute: The unique ZOTBreak-a-Way, quarter turn release,screw design installs or removes injust 1-minute; and its clutch lever sup-port spring holds the clutch lever up –automatically.

Reduces Wear and Tear: Eliminatesexcessive clutch face wear and vibration.

Easier Preventive Maintenance: Reducesthe number of clutch adjustments andeliminates the tedious task of realigningthe yoke screw and pivot pin whenreassembling. Easy access for lubrica-tion which extends life, preventing costlyreplacement of clutch drive disc andrelated parts.

Only Available From ZOT: No other origi-nal manufacturer or supplier offers thisunique and easy solution.

#420048

#520029#810023

#520030



6

Gea

rbox

& D

eck

Asse

mbl

y

Gea

rbox

&

Deck

Ass

embl

y

Features & Benefits

Prevent Crisis Breakdowns: Install theZOT Deck Lift Shaft Repair Kit before acrisis breakdown happens during leagueplay.

Time Saving – No Welding: The ZOTRepair Kit’s easy drill and bolt-on appli-cation installs in just minutes; and with-out welding.

Big Cost Savings: The ZOT Repair Kitrenews your deck lift shaft at only a frac-tion of the cost of replacing the originalequipment.

Only Available From ZOT: No other sup-plier, or original manufacturer, offersthis time saving, low cost, permanentrepair solution.

Deck Lift Shaft Repair KitFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420037

Modified Interlock LinkFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420283

Features & Benefits

Replaces Worn Pivot Eyelet: If the releasespring on the turret support frame is wornout, the ZOT Spring Eyelet Repair Kit offers asimple solution.

Installs Easily In Minutes: And with NOdrilling through the turret frame; whichweakens it further: And NO disassembly.

Eliminates Welding: No need to remove theframe or re-weld.

Adjustable Spring Tension: The ZOT SpringEyelet Repair Kit’s unique design allows forgreater adjustment and re-adjustment of therelease spring tension.

Spring Eyelet Repair Kit (Turret Release)

For ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420178

Features & Benefits

Modified Design Solution: ZOT’s InterlockLink is longer from center to center than theoriginal (see illustration). Once installed onyour pinsetters it repositions the InterlockProbe and prevents jams.

Prevents 5-Pin Chute Pin Jams: Years of usebends the pin release lever making it moredifficult to trip, or activate, turret indexing.

Note: You will need to order two ZOT Linksper machine. The ZOT Modified InterlockLink cannot be used in conjunction with anoriginal.

Longer

Is your springeyelet wornout?

34


6

Gearbox &

DeckAssem

bly

1/2”X

20’ Long

5/8”X

20’ Long

#420189

Features & Benefits

Permanent Replacement: Of endless andspliced V-belts.

Eliminates the Need: To stock extensive lineof replacement belts.

Easy Installation:Without dismantlingpinsetter drives.

Extended Life: Oil andChemical resistant compositepolyurethane/polyesterconstruction.

Link BeltFor Brunswick Pinsetters

#420189 1/2'' Link Belt

#420190 5/8'' Link Belt

Tired of having to stock dozens of V-belts indozens of different lengths…only to findyou’re missing the one you need, when youneed it most? Purchases both sizes (1/2'' &5/8'') of ZOT Link Belts and you’ll no longerneed to worry whether you have the rightcombinations of matching belt lengths ininventory (e.g., for motor to gear box, eleva-tor and turret drive, etc.). ZOT’s Link Beltcomes in 20-foot lengths per box, and, witha simple twist of the wrist, you’ll have a beltthat’s a perfect fit for your needs: Checkthese features: #420190

Suitable for:All 7 Motor to Gearbox Belts (1/2")All 4 Motor to Elevator Belts (1/2")Long Turret Drive Belts (1/2")Pit Conveyor Drive Belt (1/2")Short Turret Drive Belt (1/2")Cross Conveyor 'V' Drive Belt (1/2")Jack Shaft Drive Belt (1/2")

Suitable for:Endless Ball Wheel Belt (5/8")Spliced Ball Wheel Belt (5/8")Pin Wheel Belt (5/8")

Rubber Scissor Gripper PadFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#820021

Features & Benefits

Neoprene Rubber: Oil-resistant material charac-teristics. Install by sliding onto scissor arm.

Snap-on Urethane Scissor Gripper PadFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#420470

Features & Benefits

Urethane: Soft non-marking oil resistantmaterial extends service life.

Snap-On: Easy to install even when thescissor arm is in place on the pinsetter.

Nylon Tie Wraps: Secure the pad to thescissor arm with the nylon tie-wrap and theZOT pad stays in place.

Easy to Install: Saves time … Saves money.



6

Gea

rbox

& D

eck

Asse

mbl

y

Urethane Deck ChutesFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

“Three Styles to Fit all Ten Positions”

Features & Benefits

Lowest Coefficient of Friction: ZOT’s speciallyformulated urethane reduces frictionbetween pins and chute and prevents pinsfrom sticking.

Heavy Duty Reinforced Rib: Increasing thethickness of the material (urethane) at thestress points where chutes typically breakprematurely extends the life of the ZOTproduct.

Chute Identification: All chutes are clearlymarked for easy selection.

Larger Inside Skirt Diameter: Ensures fewerpin jams.

Pin Positioning Etched on Combo: Anembossed number alongside each mountinghole clearly identifies which hole should beused for a specific pin position on theCombo.

Universal 7, 10 & 1 -Pin Chute: Reduceinventory by using ZOT’s 7-10 pin chutewhich is easily modified for use in the 1-pinposition.

Features & Benefits

Rigid and Durable: The charac-teristics of the material reducespin-bounce that causes deck orturret jams typical of harder urethane rollers.

Urethane: Will not mark pinsand is oil resistant for longer life.

Self Lubricating Hub: Graphitefilled hexagon insert ensuresthat the hub spins on the pin.

PositioningIdentificationReinforced Rib

#680002 Combo

#680003For 7-10 pin and modification for 1-pin

Larger Inside Diameter

Cut Line 1-pin Position

Graphite Filled Hub

Urethane Deck RollerFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

#680010

Widest Diameter Pin Opening available in the industry.

Steeper Angle to Horizontal Pin Resting Position –ensuring the pin sits more upright in the chute.

Increased Radius or Contour for easier pin transitionfrom horizontal to vertical.Newly Modified Hub

#680004For 5 pin

36


6

Gearbox &

DeckAssem

bly

• Sold in packages of ten• Soft; open-cell foam: Prevents neck checking and head scalping of pins and reduces bending and cracking of

expensive aluminum deck castings.• Threaded mounting studs: For easy installation – simply insert the deck-pad into the holes and secure with nuts.• Universal: Purchase a Deck Pad Drill Template (ZOT #620083 – below) and modify your old style decks faster than

you can remove old leftover glue residue.

Standard Urethane Deck Pad#420294 (Package of 10)

“Twice the Life”

Urethane Deck PadsFor ‘A2’, Jetback and Straight ‘A’ Pinsetters

Only ZOT offers a choice between standard and long-life Deck Pads

ThreadedMounting Studs

Dura-Life Deck Pad#420297 (Package of 10)

“Lasts 3-Times Longer”

Standard Deck PadAccelerated test results proved that ZOT’s Standard Deck Pad will lasttwice as long as the original manufacturer’s product – and they’remuch easier to install.

Dura-Life Deck PadZOT’s Dura-Life Deck Pad features a rugged outer skin for greater durabil-ity. Accelerated controlled testing revealed that the average life-cycle ofthis great new chemically engineered polymer product from ZOT, is“three times longer” compared to the original manufacturer’s product.

ZOT’s Dura-Life Deck Pads not only last 3-times longer, they’re easier to install.

Cross-section showing ruggedouter skin

Deck Pad Drill Template#620083

Features & Benefits

Easy to Use: Put an end to messy glue on the deck pads.Convert your older style deck to use current bolt-on typedeck pads.

Save Time: It’s faster to modify your aluminum movingdeck than to clean and glue new deck pads in place.

gearbox and deck assembly index - zot · pdf filegearbox and deck assembly index cam follower...

Documents