ge security smart cards & t-7xx readers how to order guide how to... · ge security offers a...

GE Security

Smart Cards & T-7xx Readers

How to Order Guide

PN: HTOG-090512 Date: May 2009

GE Security Smart Cards & Readers How to Order Guide

Table of Contents GE Security.............................................................................................................................................................................................. 1 Smart Cards & T-7xx Readers........................................................................................................................................................ 1 How to Order Guide............................................................................................................................................................................ 1 Overview .................................................................................................................................................................................................. 3

Smart Cards & Readers............................................................................................................................................................... 3 Protection of Encoded Badge ID Number.......................................................................................................................... 4 What is encoded on the smart card?................................................................................................................................... 5 Mifare 1K Memory Organization ............................................................................................................................................ 7 Mifare 4K Memory Organization ............................................................................................................................................ 8 my-d® vicinity 10k bits Memory Organization............................................................................................................... 9 Permitted Combinations of Smart Card Readers with Smart Cards ...................................................................10

T-7xx Reader Ordering Guide.......................................................................................................................................................11 T-7xx Smart Card Readers ......................................................................................................................................................11 T-7xx Reader Accessories........................................................................................................................................................12 T-7xx Command Cards .............................................................................................................................................................13

T-7xx OESM Fixed Key Request Form ......................................................................................................................................14 Smart Card Ordering Guide ..........................................................................................................................................................16

Stocked Smart Cards .................................................................................................................................................................17 Custom Cards ................................................................................................................................................................................18 Custom Smart Card Ordering Checklists ..........................................................................................................................18

Part Number: HTOG-090512 May 2009


Overview GE Security offers a Series of contactless Smart Cards and Readers for access control applications. The Smart Cards & Readers operate at 13.56 MHz, and follow ISO 14443A and ISO 15693 standards. There are multiple smart card reader form factors and colors offered, with and without keypad for PIN entry. There are also multiple Smart Cards offered, with different memory configurations, The purpose of this document is to familiarize the reader with the Smart Card and Reader offerings and their options; to assist in efficient and accurate ordering.

Smart Cards & Readers Smart Cards may be used in many applications from Access Control to vending to library borrowing, to name a few. In this document the examples presented will cite Access Control applications. Smart Card Readers are configured to read specific pieces of data located in specific memory areas of the Smart Card. The data that is read is then transmitted to an access controller to be processed and to decide whether access should be granted or denied. The Smart Card Reader and the Smart Card must be identically configured for proper operation. If they are not identically configured, then the Smart Card Reader will be unable to access data from the Smart Card, and card data will not be transmitted to the access controller. In an Access Control application, the door will not open when a card that is otherwise properly configured to allow access for that space. Smart Card Readers come from the factory with a default configuration. This default configuration will automatically work with the cards offered through the GE Security Stocked Smart Card Program. This is the simplest and the most secure way to operate your system. If, for some reason, the customer does not want to use the highly secure default configuration of the GE Smart Card/Reader system, then customization can occur. Standard Smart Card Readers are ordered, in conjunction with a command card to provide the reader the specific security configuration data it will need to read the custom Smart Card. The custom Smart Card and the Smart Card reader will need to be identically programmed. If there is any variance between these two components of the system, the system will not grant access. Smart Card Readers and Cards The next two sections will provide a general overview of Smart Card Readers and Smart Cards. This overview includes a description of what is encoded onto smart cards and why. Finally, the detailed guides for ordering GE Security Smart Card Readers and GE Security Smart Cards are provided.

T-7xx Reader Overview GE Security is offers three models of Smart Card Readers: • T-700, mullion sized, contactless smart card reader (mountable of single electrical box only when

combined with the Accessory Mounting plate.) • T-720, mid-range, contactless smart card reader (mountable on single- or dual-gang electrical

box. Also mounts to European standard electrical box.) • T-725, mid-range with keypad, contactless smart card reader (mountable on single- or dual-gang

electrical box Also mounts to European standard electrical box.) Each model of GE Security Smart Card Reader is composed of three main components:



• Mounting Backplate (included with the Electronic module Base Unit • Electronics Module Base Unit • Durable UV-resistant (Outer Shell) Thermoplastic Cover The Durable UV-resistant thermoplastic cover for each model is available in three colors: black (standard), light gray, and charcoal. Each GE Security Smart Card Reader is supplied with a pigtail to allow field wiring to be attached to the reader. The readers output Wiegand data and operate at 12 VDC. General Reader Specifications Attribute T-700 T-720 T-725 Dimensions 1.7” x 6.1” x 1.1”

43mm x 155mm x 28 mm

4.52” x 6.1” x 1.26” 115mm x 155mm x 32 mm

4.52” x 6.1” x 1.26” 115mm x 155mm x 32 mm

Operating Temp -31° to 149° F -35° to 65° C

-31° to 149° F -35° to 65° C

-31° to 149° F -35° to 65° C

Relative Humidity 0 to 93% (noncondensing at 90°F or 32°C)

0 to 93% (noncondensing at 90°F or 32°C)

0 to 93% (noncondensing at 90°F or 32°C)

Operating Voltage 10-16 VDC 10-16 VDC 10-16 VDC Current Draw @ 12VDC Average 60mA

Peak 75mA Average 62.6mA Peak 72mA

Average 95mA Peak 107mA

Smart Card Overview GE Security offers two types of Smart Cards, Mifare and my-d® vicinity (also called Vicinity) . Mifare Smart Cards are defined by ISO Standard 14443A; and, my-d vicinity Smart Cards are defined by ISO Standard 15693. Operationally, ISO 15693 cards have a slightly longer read range that ISO 14443A type Smart Cards. The Mifare Smart Cards are available in two memory configurations, either 1K with 16 sectors or 4K with 40 Sectors. The my-d vicinity Smart Card is configured with 10k bits of memory in up to 15 sectors. All GE Security Smart Cards are credit card sized (CR-80) and are within ISO 7816 card thickness specifications. All the GE Security Smart Cards are made of a composite material composed of PETG and PVC. This provides a durable card, which can be printed upon in most dye sublimation printers.

Attribute Mifare my-d® vicinity (Vicinity)

ISO Standard ISO 14443A ISO 15693 Memory Capacity 1K Bytes 4K Bytes 10k bits Memory Sectors 16 40 Up to 15 sectors

Card Size CR 80 Card Material 75% PETG / 25% PVC Composite

Protection of Encoded Badge ID Number An important advantage of using GE Security Smart Cards is that they provide the ability to protect the Encoded Badge ID number. The badge encode number is written to a specific sector of the Smart Card. To gain access to that sector’s data, a key must be provided to the smart card. GE Security offers two types of key protection for sector data. The first method (and the default method) of



protection is called the GE Diversified Key method. This is the strongest form of protection for the badge encode number. The second method of protection is called the Fixed Key method. GE Diversified Key Method When the user chooses this method of protection, every card produced has a unique key for the sector where the badge encode number is stored. The key is based upon a mathematical algorithm, which the GE Security Smart Card Reader must use to calculate the unique key value for each card on the fly, when the card is presented to the reader. If an individual is attempting to “break” the system by “sniffing” the RF data that is passing between the reader and card (and that data is also encrypted), the most they would be able to break is the key for that individual card. They would not be able to re-use the information gained in the sniffing to generate keys for other cards, since each card using the GE Diversified Key has a unique key. This protection applies only to the Diversified Key method. Fix Key Method When the user chooses this method of protection, every card produced for this system must have the same key for the sector where the badge encode number is stored. The Smart Card Reader is pre-programmed with the key to unlock the sector. When the Smart Card is presented to the reader, the Smart Card Reader will pass the Fixed Key to the Smart Card and the Smart Card will release the Badge Encode (BID) number to the reader. The passing of the Fixed Key data is encrypted between the Smart Card Reader and the Smart Card. The fixed sector key method of protecting the BID puts the end user in control of the smart card. The end user can procure the smart card from a variety of suppliers, and can encode the smart card locally. By default, GE Smart Card Readers are set to use GE Diversified keys. If the customer desires to use the Fix Key method, a Command Card is used to load the Sector Key information into every GE Smart Card Reader in that system. In the Reader Section of this Guide, there is a form, which facilitates the ordering of the Fix Key Command Card.

What is encoded on the smart card? Every Smart Card has a unique identifier built into it. This identifier is called the Card Serial Number (CSN) or Unique ID Number (UID). This is burned into the smart card chip during the chip manufacturing process. The T-7xx readers can be configured to read the UID information instead of sector data if the customer wants to configure their system that way. A command card (pn: 521308001) is used to configure the reader to what is called T-5xx emulation mode. This means the T-7xx reader will only read the UID information from either a Mifare or my-d® vicinity smart card. GE Security can also supply encoded Badge ID numbers on Smart Cards. Each Smart Card has multiple sectors of memory. As a standard, GE Security uses Sector 1 to store Badge ID data (on custom cards GE can change to sector 10 or 15). Within that sector, patterns of 0’s and 1’s are written, which can be decoded by the access controller into the Badge ID number. GE Security can encode the Badge ID number in several different Wiegand formats, depending upon the capabilities of the system the customer has. The most common Wiegand Encode format is the 5502 format. This format yields a 16 digit badge ID number. Each Badge ID made with this format is unique. GE Security does not remake or reuse any 16 digit Badge IDs. For legacy systems, which may have difficulty decoding the 5502 format or using a 16 digit Badge ID, GE Security provides the industry standard 26 bit Wiegand format. The 26 bit Wiegand format is well known in the access control industry, and the output is generally interpreted as a three digit Facility Code (between 00001 and 00255) and a 5 digit Badge ID (between 00001 and 65,732). Since there is a finite limit to the 26 bit Wiegand data patterns, it is possible that Badge ID may be used more than once. This issue can be overcome by the system using this scheme to select his own Fixed Key for encode sector. This will result in the Badge ID being protected by their own sector key, and if a



repeated Badge ID happened to be presented to the system, it would not be processed since the badge would not have the correct sector Key for that system.




Mifare 1K Memory Organization

he Mifare 1K Smart Card has 16 sectors where data can be stored. Each Sector is comprised of four

E

Tblocks of 16 bytes each. Block 3 of each sector defines the access keys and access rules for that sector. The remaining 48 bytes (blocks 0, 1 and 2) can be used for data. The default location for GSecurity to Encode Badge ID data is Sector 1, block 0. The GE Diversified Key or Fixed Key is encodedin Sector 1, block 3. On a custom basis, GE Security Smart Card Readers can also utilize Sector 10 or Sector 15 to store Badge ID data.

Mifare 1K Memory Map



Mifare 4K Memory Organization

he Mifare 4K Smart Card memory is configured in much the same way. On the Mifare 4K Smart Card,

an be

Tthere are 40 Sectors, the first 32 of which contain 4 blocks, and the final eight sectors are larger, having 16 blocks in them. Again, each block is composed of 16 bytes, and access to any sector crestricted by Sector Key. The default location for GE Security to Encode Badge ID data is Sector 1, block 0. The GE Diversified Key or Fixed Key is encoded in Sector 1, block 3. On a custom basis, GESecurity Smart Card Readers can also utilize Sector 10 or Sector 15 to store Badge ID data.

Mifare 4K Memory Map



my-d® vicinity 10k bits Memory Organization

he my-d® vicinity secure features secure memory access.

he User / Key Memory with its flexible organization permits up to 14 independent secure sectors of a

ose

he service area contains the UID and manufacturer data. The service area cannot be changed.

e administration area comprises the access conditions and sector information.

T Tvariable size each protected with a 64 bit key pair. Only after a successful authentication a single sector is accessible. In addition, one freely programmable plain sector is available for general purpuse. T Th

my-d® vicinity 10k Bit memory layout



Permitted Combinations of Smart Card Readers with Smart Cards

cenario Readers Command Cards Required Smart Cards S

Any GE Security Stock Smart Card GE DiveKey

rsified Default T-7xx None Readers Custom Smart Card with option: GE Diversified Key

Fixed Key Default T-7xx

Order : OESM Fixed Key

______)

Option that

Readers

Command Cards (PN: 521XCC01-___Required to complete Fix Key Request Form

Customs Card OnlyMust have Fixed Keymatches Fixed Key Request Formfor OESM Command Card

T-5xx ion Default T-7xx ion ty

h emulatMode Readers

Order: T-5xx EmulatMode Command Cards (PN: 521308001)

Any Mifare or my-d® viciniSmart Card will have UID whiccan be read

PIV Cards 7xx and CardsDefault T-Readers

Order: PIV Comm (PN: 521307001) Customer supplied PIV cards


T-7xx Reader Ordering Guide

T-7xx Smart Card Readers

T-700 – Mullion Mount, Smart Card Reader

T-720 – Mid Range, Single/Dual Gang, European Back Box Mountable.

T-725 – Mid Range with Keypad, Single/Dual Gang, European Back Box Mountable.




Complete assemblies of T-700, T-720, and T-725 readers are available. In all cases, the complete assemblies are offered with black plastic outer housings. If another color housing is desired, then two parts must be order for each reader, the electronics module base unit (which also includes the backplate), and the outer housing in the desired color. Light gray and charcoal are the other available colors. The following table provides all required part numbers to order T-7xx Smart Card Readers:

T-7xx Reader Accessories

art Number Description

P470677001 Mounting plate, Light Gray, for T-700 Mullion Reader. Plate mounts to standard

US single gang electric box. 470677002 00 Mullion Reader. Plate mounts to standard US Mounting plate, Black, for T-7

single gang electric box. 470677003 for T-700 Mullion Reader. Plate mounts to standard US Mounting plate, Charcoal,

single gang electric box.

Charcoal CaseBase UnitLight Gray CaseBase UnitBase Unit & Black Case

520242005

520241005

520240005

520242004

520241004

520240004

430242501430242501430242006T-725

430241501430241501430241006T-720

430240006 430240501430240501T-700

Two Piece Order

Charcoal Plastics

To Order

•Base Unit (T-700, T-720 or T-725)

•Corresponding Charcoal Plastics

Two Piece Order

Light Gray Plastics

To Order

•Base Unit (T-700, T-720 or T-725)

•Corresponding Light Gray Plastics

Primary Offering

Complete Assemblies

T-700 Mullion, Black

T-720 Mid-Range, Black

T-725, Mid-Range w/ Keypad, Black

Each reader assembly consists of 3 pieces

–Mounting plate–Electronics module –Top Cover, Black

Charcoal CaseBase UnitLight Gray CaseBase UnitBase Unit & Black Case

520242005

520241005

520240005

520242004

520241004

520240004

430242501430242501430242006T-725

430241501430241501430241006T-720

430240006 430240501430240501T-700

Two Piece Order

Charcoal Plastics

To Order

•Base Unit (T-700, T-720 or T-725)

•Corresponding Charcoal Plastics

Two Piece Order

Light Gray Plastics

To Order

•Base Unit (T-700, T-720 or T-725)

•Corresponding Light Gray Plastics

Primary Offering

Complete Assemblies

T-700 Mullion, Black

T-720 Mid-Range, Black

T-725, Mid-Range w/ Keypad, Black

Each reader assembly consists of 3 pieces

–Mounting plate–Electronics module –Top Cover, Black



T-7xx Command Cards default behavior of the T-7xx readers. In all cases, the command

Command Cards needs to be presented to a T-7xx reader within 1 minute of reader power up to

E Part Number for Command Command Cards Function

Command Cards are used to changecard is also provided with a restore to default card, in case the customer decides not to implement the behavior change and wants to return the reader to its default condition. Achange the functionality of the reader. GCard Kit

Beeper Off Disable beeper 521305001 r configuration to o default Reset reade

default Restore reader tconfiguration

LED Green Normal l LED color from Change NormaYellow to Green 521306001

uration to default Reset reader configdefault

Restore reader toconfiguration

Select 75-bit PIV Format d Output to 75-Set PIV WieganBit

Select 200-bit PIV Format PIV Wiegand Output to 200-Set Bit

Disable PIV Disable PIV Enable PIV Enable PIV

521307001

r configuration to der to default Reset readedefault

Restore reaconfiguration

T-5xx Emulation Mode z UID Read 13.56 MH521308001 ion to ult Reset reader configurat

default Restore reader to defaconfiguration

Keypad configuration to 1 key, tput to 1 key, 8-8-bit complement

Sets keypad oubit complement 521309001

on to 4-bit t to 4-bit burst Keypad configuratiburst Set keypad outpu

Set OESM Fixed Key to user defined Key

Set OESM Fixed Key to user defined Key 521XCC01-_________

Custom configuration to er to default

(Requires completion ofOESM Key Request Form) Reset reader

default Restore readconfiguration


T-7xx OESM Fixed Key Request Form To setup GE Security’s T-7xx readers with OESM fixed Mifare keys, request the OESM Fixed Key Configuration Card Kit. This configuration card kit comes as a set of two cards, one for setting up new key value and the other one to revert back from new key value to default value. Before shipping the OESM Fixed Key Configuration Card Kit to setup keys, GE Security Order entry will verify the person to whom it’s being shipped. The configuration cards would be sent only to end user whose premises are being secured and not to any other entity. Please fill in the following form to request the OESM Fixed Key Configuration Card Kit. Date:_________

End User Primary Contact Name Title Organization Address Line 1 Address Line 2 City State Zip Code Phone Number Fax Number Email Address Supervisor End User Alternate Contact Name Title Organization Address Line 1 Address Line 2 City State Zip Code Fax Number Phone Number Email Address Supervisor

The OESM Fixed Keying Configuration Card Kit would be shipped to the primary contact filled in the above table. Usually, primary contact is Chief Security Officer who is responsible for security of the facility where the readers are being installed. [Continued…]



Facility Information:

Reader Install Address Organization Address Line 1 Address Line 2 City State Zip Code Phone Number Fax Number Email Address Supervisor

For the security of premises, OESM Fixed Key information should be a highly guarded secret. The knowledge of fixed key is privileged secret information, which should be known only to select individuals of the organization. The key values to be filled below should be chosen randomly by the primary contact filled in the above table. OESM Fixed Key Values (Secret):

Access Key Key Value*

OESM Fixed Key

*Note: Fill in cells of value field with either 0-9 or A-F. An example of completed values is given below.

7 B E E F 6 9 9 6 1 2 3 Please fill in the quantity of configuration card kits required for the setup. GE Security limits one time order quantity to 5 kits at a time. Quantity of Configuration Card Kits:___________________________________ Please fill in any special comments for the order below. Comments: _______________________________________________________



Smart Card Ordering Guide GE Security offers two main ways to order smart cards. One method is called the GE Security Stocked Smart Card program, whereby Smart Cards with GE Diversified Keys are pre-encoded with a Badge ID. Every GE Security Stocked Smart Card has a unique Sector Key (GE Diversified). Depending on the Badge ID encoding, the Badge ID may be unique (Format 5502), or the Badge ID may be Facility Code/Badge ID based (Format 26-bit). The cards are CR-80 sized, they are made of composite material that is suitable for in field dye sublimation printing, and they have dots indicating where vertical or horizontal slot punch may be punched. The second method of ordering Smart Cards is to complete a custom card ordering checklist. Use this process if: • Customer wants to use customer defined Fixed Keys • Customer wants pre-printed artwork printed on the Smart Card • Customer wants a card option that this not available on the Stocked card (external ID, Mag Stripe,

badge encode number written to different sector, etc)




Stocked Smart Cards

mart rt Description Details

SCard PaNumber

700300001 Mifare 1K

ncoded wit

• ISO Thickness

ID

• No Slot Punch (dots are visible

c Stripe Key

01

Badge ID E h • Back: White Glossy 2601

• Composite Material • Front: White Glossy

• Size: CR-80 • No External

for where slot punch is permitted)

• No Magneti• GE Diversified Sector• Badge ID Encoded with 26

700300002 Mifare 1K

ncoded wit

ID

c Stripe Key

02


• ISO Thickness • Composite Material • Front: White Glossy


• No Slot Punch (dots are visiblefor where slot punch is permitted)


700300003 Mifare 4K

ncoded wit

ID

c Stripe Key

01






700300004 Mifare 4K

ncoded wit

ID

c Stripe Key

02






700300005 my-d® vicinity 10k bits

ID

c Stripe Key

01

Badge ID Encoded with 2601

• ISO Thickness • Composite Material • Front: White Glossy • Back: White Glossy • Size: CR-80 • No External



700300006 my-d® vicinity 10k bits

ID

c Stripe Key

02

Badge ID Encoded with 5502

• ISO Thickness • Composite Material • Front: White Glossy • Back: White Glossy • Size: CR-80 • No External





Custom Cards has its own checklist, which must be completed to process your order. Select the

ustomizable GE rds Description Base Configuration

Each custom card base Smart Card you want to customize, and complete its entire checklist. Please include the completed checklist with your order. CSecurity Smart Ca

700310001 Mifare 1K osite

• ISO Thickness • Material: Comp• Front: Glossy • Back: Glossy • Size: CR-80

700310002 • Mifare 1K trip

s osite

With Mags e • Back: Glossy

• ISO Thicknes• Material: Comp• Front: Glossy

• Size: CR-80

700310003 • Mifare 4K

s osite

• ISO Thicknes• Material: Comp• Front: Glossy • Back: Glossy • Size: CR-80

700310004 • Mifare 4K trip

s osite

With Mags e • Back: Glossy

• ISO Thicknes• Material: Comp• Front: Glossy

• Size: CR-80

Custom Smart Card Ordering Checklists

GE Security

Custom Mifare 1K Page 1 May 2009

Customizable GE Security Smart Card

700310001

Mifare 1K • ISO Thickness • Material: Composite • Size: CR-80

Customer - Company Customer Contact Phone: Customer Email Fax: Customer Location Integration – Company Integrator Contact Phone: Integrator Email Fax: Integrator Location

Option Check to Select

Description of option Part Number

X Card Body Finish Options 990001001 White / White, Gloss / Gloss 991001011 White / White, Gloss / Matte 991001012

Card Body Finish

White / White, Matte / Matte 991001013 X Select to have an External ID printed on the Smart Card 990001002 EXTERNAL ID, NONE 991001021

EXTERNAL ID, Thermal Print, Sequential, Not to Match Encode, START NUMBER: ___________________ 991001022

External ID

EXTERNAL ID, Thermal Print, Match Encode 991001023 X External ID Length Options 990001004 External ID Length, None 991001041 External ID Length 6 Digits 991001042 External ID Length 10 Digits 991001043 External ID Length 12 Digits 991001044

External ID Length

External ID Length, Specify: _____________________ 991001045

X If you have selected to have an External ID placed on the Smart Card, then you can also select if you want a Cross Reference list between the External ID and the Encoded ID number. If there is no External ID, select No Tab Run.

990000021

No Tab Run Provided 991000077 Tab Run is Provided on Paper 991000078 Tab Run is Provided on Memory Stick 991001051

Tab Run

Tab Run is Provided on Memory Stick and Paper 991001052

X If you have selected to have an External ID, select where the External ID is to be placed. Otherwise, select NONE. 990001003

External ID Location, None 991000031 External ID Location, Back, Top Left 991001032 External ID Location, Back, Bottom Left 991001033

External ID Position

External ID Location, Back, Bottom Right 991001034 X Select how you need to have the Smart Card Sector Key Encoded. 990001005 Sector Security Encoding, None 991001061 GE Diversified Key in Sector 1 (Default) 991001062 GE Diversified Key in Sector 10 991001063 GE Diversified Key in Sector 15 991001064

OESM in Sector 1 (Default), Customer Defined Fixed Key, Specify Key A _______________and Key B: _______________ 991001065

Sector Key Encoding Options


GE Security



X Select the encoding format for the Badge ID on the Smart Card. Select NONE if customer is only using UID or is self encoding 990001006

Badge ID Encode Format, None 991001071 Badge ID Encode Format, 2601 991001072

Badge ID Format Encoding Option

Badge ID Encode Format, 5502 (Default) 991001073

X Select whether to have where to slot punch marked with dots, or not, or to actually have the Smart Card Slot Punch (this can cause issues if card is to be printed later by customer).

990000046

Slot Punch, None, Slot Mark, None 991001081 Slot Punch, None, Slot Marked (Both Horizontal and Vertical) 991000038 Slot Punch, Horizontal, Top Center 991000091

Slot Punch Marking or Slot Punch

Slot Punch, Vertical, Top Center 991000039

X If Smart Card needs to be printed, select the number of colors to be printed, otherwise select Plain White 990000023

Front, Plain White 991000107 Front Custom 1 - Color 991000108 Front Custom 2 - Color 991000109 Front Custom 3 - Color 991000110 Front Custom 4 - Color 991000111 Front Custom 5 - Color 991000112

CUSTOM COLORS FRONT

Front Custom 6 - Color 991000113


Back Plain White 991000114 Back Custom 1 – Color 991000115 Back Custom 2 – Color 991000116 Back Custom 3 – Color 991000117 Back Custom 4 – Color 991000118 Back Custom 5 – Color 991000119

CUSTOM COLORS BACK

Back Custom 6 – Color 991000120

X If anything other than Plain White for both Front and Back of Smart Card the two items below must be selected. 990000018

Customer Supplied Artwork Preparation charge, Artwork must be camera ready 991000122 CUSTOM

ARTWORK

Plate Charge per color, per side, Required for both customer supplied and custom artwork 991000121

Custom Subsurface Hologram – Customer supplied Artwork must be camera ready 991001091

Custom Hot Stamp surface Hologram – Customer Supplied – Artwork must be camera ready 991001092

GE Security

Custom Mifare 1K with Magstripe Page 1 May 2009


700310002

Mifare 1K • ISO Thickness • Material: Composite • Front: Glossy

• Back: Glossy • Size: CR-80 • With Magstripe





Card Body Finish



External ID


External ID Length



990000021


Tab Run





External ID Location, Back, Bottom Right 991001034 X Magstripe Encoding Option 990000025 Magstripe

Encoding Magstripe Encoding, None 991000074 X Select how you need to have the Smart Card Sector Key Encoded. 990001005 Sector Security Encoding, None 991001061 GE Diversified Key in Sector 1 (Default) 991001062 GE Diversified Key in Sector 10 991001063 GE Diversified Key in Sector 15 991001064



GE Security









990000046






CUSTOM COLORS FRONT




CUSTOM COLORS BACK




ARTWORK




GE Security



700310003

Mifare 4K • ISO Thickness • Material: Composite • Front: Glossy • Back: Glossy • Size: CR-80





Card Body Finish



External ID


External ID Length



990000021


Tab Run





External ID Location, Back, Bottom Right 991001034 X Select how you need to have the Smart Card Sector Key Encoded. 990001005 Sector Security Encoding, None 991001061 GE Diversified Key in Sector 1 (Default) 991001062 GE Diversified Key in Sector 10 991001063 GE Diversified Key in Sector 15 991001064



GE Security









990000046






CUSTOM COLORS FRONT




CUSTOM COLORS BACK




ARTWORK




GE Security



700310004

Mifare 4K • ISO Thickness • Material: Composite • Front: Glossy • Back: Glossy

• Size: CR-80 • With Magstripe





Card Body Finish



External ID


External ID Length



990000021


Tab Run





External ID Location, Back, Bottom Right 991001034 X Magstripe Encoding Option 990000025 Magstripe

Encoding Magstripe Encoding, None 991000074 X Select how you need to have the Smart Card Sector Key Encoded. 990001005 Sector Security Encoding, None 991001061 GE Diversified Key in Sector 1 (Default) 991001062 GE Diversified Key in Sector 10 991001063


GE Diversified Key in Sector 15 991001064

GE Security










990000046






CUSTOM COLORS FRONT




CUSTOM COLORS BACK




ARTWORK




ge security smart cards & t-7xx readers how to order guide how to... · ge security offers a...

Documents