GE Healthcare has made reasonable efforts to ensure this BIM file conformsto requirements of the applicable pre-installation manual. This BIM file wasproduced to assist with site planning and is not intended for construction orfinal building modeling. GE Healthcare is not responsible for any damagesresulting from use of such file for construction or final building modelingpurposes. Compliance with all applicable local, state, and federal laws andregulations is the responsibility of the customer or its designated architectsand engineers. Please keep in mind the information in this BIM file isdynamic and is subject to change without notice. It is the responsibility ofthe customer or its designated architect(s) and engineer(s) to ensure theyhave the latest equipment or product information. Scale

Project numberDateDrawn byChecked by

GE HealthcareProject Management

12" = 1'-0"

A-1

DISCOVERY NMCT670 CZT - RENDERING

7-8803.MAR.17GENPACT

-

16' - 1"

27' -

2"

9' -

4 1/

8"

GE Healthcare has made reasonable efforts to ensure this BIM file conformsto requirements of the applicable pre-installation manual. This BIM file wasproduced to assist with site planning and is not intended for construction orfinal building modeling. GE Healthcare is not responsible for any damagesresulting from use of such file for construction or final building modelingpurposes. Compliance with all applicable local, state, and federal laws andregulations is the responsibility of the customer or its designated architectsand engineers. Please keep in mind the information in this BIM file isdynamic and is subject to change without notice. It is the responsibility ofthe customer or its designated architect(s) and engineer(s) to ensure theyhave the latest equipment or product information. Scale

Project numberDateDrawn byChecked by

GE HealthcareProject Management

1/8" = 1'-0"

A-2

DISCOVERY NMCT 670 CZT - PLAN

7-8803.MAR.17GENPACT

-

Specialty Equipment ScheduleDescription Weight lbs BTU

STORAGE CABINET 99 0XELERIS WORKSTATION 55 255R-WAVE RECORDER 6 0OPERATORS CONSOLE ON CART 0DISCOVERY NM/CT 670|GANTRY (CT) 3899 18771UPS SYSTEM 350 3399POWER DISTRIBUTION UNIT 771 5119POWER INPUT|DISTRIBUTION BOX 22 0MAIN DISCONNECT CONTROL 90 0COLLIMATOR CART 1058 0FREEDOM WORKSPACE|LARGETABLE

147 8191

ESTOP PUSHBUTTON 0 0EMO PUSHBUTTON 0 0COLLIMATOR CART 1058 0COLLIMATOR CART 1058 0TABLE SWING 0

Hold the Left Click for Rotating aroundUse the Scroll for Zooming in and outHold Left click + Ctrl Key to change perspective

Click for Site Planning Support

Discovery NMCT 670 CZT