gdo-galvanizadora de occidente · molding through join ventures with third party companies....
TRANSCRIPT
GDO- Galvanizadora de Occidente
PRESENTATION
Specialized in Metal Plating and Plastic Plating.
GDO counts with 3 facilities located in the
Industrial Zone of Guadalajara, Mexico.Industrial Zone of Guadalajara, Mexico.
GDO can also offer to Customers Injection
Molding through Join Ventures with Third
Party Companies
Locations and Capabilities
1) METAL FINISHING FACILITY (Plant I, 32000 sqft) (2,973 mt²)
This facility for metal substrates includes a total of 12 lines with a wide
range of finishes like: Zinc (acid and alcaline), Electroless Nickel (mid and
high phosphorous) on steel, copper and aluminum, Zinck/Nickel (high
and low Ni content), Black Nickel, Satin Nickel, Bright Nickel-Chrome,
Aluminum Chromatizing (Alodine), Anodizing, Passivation, to mention a
few.few.
Plant I
Metal finishes
Zinc - Nickel
Black NickelSatín Nickel
Nickel
Zinc
Barrel Line
Alodine
Locations and Capabilities
2) PLASTICS PLATING FACILITY (Plant II, 38000 sqft) (3,530 mt²)
• Fully automated large capacity ABS & ABS/PC plastics plating
line with 74 stations to provide bright and satin chrome, with
automotive specification, interior and exterior for America
and Europe with micro porous and microcrack nickel andand Europe with micro porous and microcrack nickel and
black Chrome.
Our working window is 1.3 mt high, 2.2 mt long and 0.6 mts
wide.
The production cycle is: 4 minutes
• Paint operation line
• Laboratory
Plant II
Plastic finishes
Black Chrome
SatinChrome
Bright Chrome
POP LINE LAY OUT
PRODUCTION CAPACITY
Pop Line Capacity
Line FinishOE
Specification
Work
Window
width and
depth
(mts) Loads per hour specs covered
Bright Chrome Exterior 2.2 x 1.6 12
PS-8810; WSS
POP
PS-8810; WSS
M1P83D3/D2; GMW
14668; HES 6001; NES
M4063;
Interior
2.2 x 1.6 12
Satin Chrome 3Q7 Exterior 2.2 x 1.6 8
TL-528
interior2.2 x 1.6 8
Satin Chrome SZ6,Z7 Exterior 2.2 x 1.6 8
PS-8810 Interior2.2 x 1.6 8
Bright Chrome
Exterior
Europe2.2 x 1.6 12 TL-528
Plastic finishes
Satin chrome
Bright chrome
Plastic finishes
Black chrome
Locations and Capabilities
3) OTHER OPERATIONS FACILITY (Plant III, 25.000 sqft= 2.325 sqm)
• Wharehousing,
• Racks and Tooling Manufacturing
• Basic Assemblies.• Basic Assemblies.
Plant I, II, III total area
95.000 sqft = 8.830 sqm
Laboratory
Fully equipped testing and control laboratory guarantee our
finishing quality.
• CASS and Salt Spray Chambers.
• X Ray thickness measurement (Fisher XRF).
Spectrophotometer UV/Visible rays to analyze metal in• Spectrophotometer UV/Visible rays to analyze metal in
solution and brightners.
• Coulombmeter equipment (Kocour 6000) Thickness and step
test.
• Chemical and statistical control of process lines.
• Metalographic Microscope for dubpernell test.
Laboratory Equipment
Laboratory Equipment
Coulombmeter Kocour 6000
X – rays Fischer XRF
Spectrophotometer UV
Environment
• GDO complays with all environmental government regulations
and standards
• Each GDO facility has water treatment plant
Generals
• 48 years of experience in specialized and high standard metal
and plastic finishing.
• High reputation and well recognized manufacturing
capabilities to supply different markets and industries.
• Highly qualified team and advanced technical expertise.
• Quality oriented and TS 16949 certified.
Main Customers
Automotive:
Main Customers
Home appliances:
Main Customers
Electronics:
Main Customers
Other sectors:
Running Projects
• Audi (Automotive)
• Daimler Trucks (Automotive)
• Hitachi Cables (Automotive/Industry)
• Lang Mekra (Automotive)• Lang Mekra (Automotive)
• Methode (Automotive)
• Sunningdale (Automotive)
• TRW (Automotive)
• Tyco (Aerospace)
• Voit (Automotive)
Production & General
• Three shifts running all year long
• Flexible capacity for different types of finishing
• 200 direct labor• 200 direct labor
• 35 employees (Technical Engineers, QE, Logistics,
Marketing, Customer Services, Administration,
General Management)
Quality Capabilities
We accomplish automotive & international
Standards, like:
• WSS M1P83 D1,D2,D3 (Ford)
• GMW 14688 (General Motors)
• PS 8810 (Chrysler)
• NES M4063 (NISSAN)
• HES D2003-05 (Honda)
• TL 528 (VW)
• TR 0128 7813008 (Volvo)
• PV 0404909 (BMW)
And others
Quality Certification
ISO TS 16949 (May 2012)(May 2012)
Quality Certification
In progress:
• A2LA
(American Association For Laboratory Accreditation)
to be achieved on 2013to be achieved on 2013
• ISO 14000
to be achieved on 2014
Contact Information
• Headquarter:
Calle 20 #2993 Zona Industrial C.P. 44940
Guadalajara, Jalisco, MEXICO
• Telephone: (+52) 33 3145 0318, 33 3145 0342• Telephone: (+52) 33 3145 0318, 33 3145 0342
• Website: www.gdo.com.mx
• Email: [email protected]
THE MAB GROUP
Metal & plastic finish Automotive OE & AM accesories
60 MILLION USD IN SALES800 EMPLOYEES
100% Mexican Capital
Automotive spare partsdistribution
Truck spare partsdistribution