gb flyer compressors sheet
TRANSCRIPT
-
8/11/2019 GB Flyer Compressors Sheet
1/2
Compressor componentsPISTON RINGS and GUIDE BEARINGS
Application field
of piston rings
and guide bearings
Dry compressors
Reduced lubrication
compressors
Refrigeration units
Expansion units
Pumps for the chemical
industry
Pumps for liquefied
gases at low temperature
In order to guarantee best performances to the compressors, piston rings and bearing guides made up of
various PTFE compounds are largely used, replacing traditional materials like cast iron, graphite and stratified
structured materials. Pure PTFE chemical inertness makes this material suitable for all the applications where
high chemical resistance is required in presence of almost technical gases and fluids. Exemptions exist inpresence of alkaline metals in the molten state, fluorides and fluoridric acid in the gaseous state, and
some fluorocarbons at high temperatures and pressures. PTFE piston rings and guide bearings can be used
at temperatures up to 260C, depending on the system pressure and piston speed this temperature limit
value should be lowered. In order to improve wear resistance and to rise the working temperature limit
DuPontTMVespelSP21 is also used to manufacture floating rings, piston rings and guide bearings. Fluorten
manufactures also components in natural and filled VICTREXPEEKTM for inlet and outlet valves.
-
8/11/2019 GB Flyer Compressors Sheet
2/2
Property* Standard Units
Typical values
PTFE
C-657
PTFE
BM-40111
PTFE
VGM-70411
PEEK
NAT.
PEEK
V-706
PEEK
CF-706
DuPont TM
Vespel
SP21
Density ASTM D 792 g/cm 3 2,10 3,80 2,27 1,30 1,54 1,40 1,42
Tensile strenght ASTM D 4894 Mpa 14 18 18 **100 **150 **200 **62
Elongation ASTM D 4894 % 50 140 150 **30 **2 **1,5 **5,5
Hardness ASTM D 676 Shore D 67 67 64 *99 *103 *107 80
aximum operating
temperature/ C +250 +250 +250 +240 +240 +240 +300
FE and TECHNOPOLYMERS special formulations available on demand. For any further infotmation please contact our technical office
ckwell Hardness scale M in compliance with Standard ASTM D785
ltimate tensile strenght and Ultimate elongation in compliance with Standard ISO 527
24060 CASTELLI CALEPIO (BG) Italy Via Cercone, 34 Tel. +39 035 4425115 Fax +39 035 848496
[email protected] www.fluorten.com
ince 1966 FLUORTEN is an industrial production leader in design, extrusion, moulding and machining, able to supply semi-finished and finished products in PTFE and injection
oulded technopolymers. The production cycle and Quality of FLUORTENmatch company philosophy to work with each Customer to solve project design and production
roblems to obtain a competitive product.
Compressors components
PISTON RINGS and GUIDE BEARINGS
piston rod
piston ringGuide bearing
oil scraperfloating rings
valve-(inlet or outlet)
and Rulon Finished parts Sliper ringsand FLUOR-S/SC Tapes Spring energized seals Official Italy distributor ofDuPont TMVespel trademark
Technopolymers injection mouldingVICTREXPEEKTM/ PCTFE
Semifinished products
st data and information given here are the result of our considerable experience they are only intended as a guide line and Fluorten s.r.l. can accept no responsability either for the results
ined from this information or for situations in conflict with any existing patents.
PTFE and HPP ball valves
components