#111983

STEALTH X: BUILD CONFIGURATION: MOTOR MOUNT FACING REAR (STOCK)GATE 01

STEALTH X: BUILD CONFIGURATION: MOTOR MOUNT FACING REAR (STOCK)GATE 02

STEALTH X: BUILD CONFIGURATION: MOTOR MOUNT FACING FRONT (OPTIONAL - REQUIRES #42024 - TOP SHAFT )GATE 03

02

20T

20T 20T 20T

20T 20T28T

28T 28T 28T

28T 28T

27T 26T

52T

52T 52T 52T

52T 52T

53T 54T52T

52T 53T 54T

28T

28T 27T 26T

OVERDRIVE: Overdrive is a scenario where the front and rear wheels do not rotate at the same speed. The Stealth X gearbox is designed to allow the front wheels to spin faster than the rear wheels. Overdrive is advantageouse when climbing up rock faces because the front tires will want to pull the vehicle up the rock. On desents, the rear tires rotating slower than the front tires will help keep the chassis more stable and keep the rear tires planted on the ground.

Stealth X: The Stealth X gearbox allows the driver to change the front to rear drive ratios with 3 separate ratio adjustments to the rear drive shaft. The driver has the option to fl ip the gearbox direction (motor mount facing the front) the optional inverse top shaft (#42024) is required.

Please Note: The 20T top shaft, 28T idler gear, and 52T drive gear will always be meshed together in all 6 gearbox confi gurations.

1:1 (No Over Drive)

1:1 (No Over Drive)

Over Drive Option 1 (Stock)

Over Drive Option 1 (Stock)

Over Drive Option 2

Over Drive Option 2

Front Of Vehicle

Front Of Vehicle

Rear Of Vehicle

Rear Of Vehicle

GEARBOX BUILDGATE 01

GEARBOX BUILDGATE 02

GEARBOX BUILDGATE 03

0133.664760, -117.676533

x4

x3

x1

x2

x1

x1

x1

x1

x2

x4

x1

x1

x1

x1

x1

x1

NOTE: There are optional gearbox builds on the back page

x1

x1

x2

x2

x1

x1

x4

x5x2

x1

x2

42026Stealth X Gearbox

Idler Gear, 27T

42029Stealth X Gearbox

Motor Plate

42023Stealth X Gearbox

Spur Gear Hub

315323x8mm

BHCS

89216M4 Locknut

42030Stealth X Gearbox

Top Shaft, Rear

915605x10x4mm

Bearing

410783x28mm

BHCS

42025Idler Shaft Pin

2x9mm

42025Stealth X Gearbox

Idler Shaft

9156310x15x4mm

Bearing

313502.5x10mmFHCS

252013x8mmFHCS

9654Spur Gear48P, 87T

7337.250x.125x.015”Washer

1336Pinion Gear18T

42023Stealth X GearboxGear Cover

42023Stealth X GearboxCase

42023Stealth X GearboxCase

9156310x15x4mmBearing

410772.5x14mmFHCS

42027Stealth X Gearbox Outdrive, Long

42027Stealth X Gearbox Outdrive, Short42027

Stealth X Gearbox Drive Gear Shim

42028Stealth X Gearbox Drive Gear, 52T

42026Stealth X Gearbox Idler Gear, 28T

42028Stealth X GearboxDrive Gear, 53T

x1Motor

Stealth X GearboxStealth X Gearbox 20T 28T

27T

52T

53T

Over Drive Option 1 (Stock)

x1

NOTE: Make sure the gear mesh between the spur gear and pinion has a slight amount of movement between the two gears.

x2315303x5mm

BHCS

252253x3mmSet Screw