gas extract installation 151214
TRANSCRIPT
Project
To design, manufacture,
install & commission 3 No
Gas Extract Systems to live
Data & Deeds Rooms.
System Components
Case Axial Fire Rated Fan,
Positive Pressure Relief
Vent and Associated
Keyswitch interfaced to
Extinguishing Control Panel.
Design Considerations
The volume of extraction is
based upon 4 air changes
per hour and within these
designs no additional pres-
sure venting was required
apart from the built in pres-
sure vent.
Contact E [email protected] W www.airpressuresolutions.co.uk T 01732 652025
We were asked to design, supply,
install and commission 3 no.
combined extract and pressure
relief systems. The systems are
based upon 4 air changes per
hour which is the norm in these
types of environments.
As a global leader in pressure venting we have over 30 years experience in developing pressure venting & associated
products to many different markets globally. Our product line up consists of the following Pressure, Blast & Air Sta-
bilisation Vents, Fire Dampers, Window Actuators, Leak Detection, Facility Monitoring Equipment, Ventilation Prod-
ucts and Smoke Control Systems. If you want a further look at our products please look at our website or please call.
At AP Solutions are able to offer products manufactured by many of the industries key players
but are not tied to these so we are able to offer solutions to suit our clients requirements.
We are also able to offer the required service and maintenance on these types of systems to BS7346 part 8.
On this particular installation 2 no floor box units were
installed and 1 no wall mounted units. The floor box
units also included spiral ductwork to extract at high
level. Whereas the wall mounted unit extracted
through the wall to the external weather louvre as
shown below
All the installation work was carried out by
our own operatives and was completed on
schedule and within budget. If you need
datasheets on this product please contact
us.
Floor Mounted Extract Unit
300mm x 300mm unit
Wall Mounted Extract
500mm x 500mm unit
External Weather Louvre
500mm x 500mm