garment industries cutting machines

8/6/2019 Garment Industries Cutting Machines

1/9


2/9


3/9

w w w . e a s t m a n c u t s . c o m

Blue Streak II MODEL 629X

The versatility of the Blue Streak II is unmatchedby any other straight knife. It is the obvious choicewhen one machine is required for multiple tasks. A low pro le, polished, streamlined baseplate is

designed to reduce friction and distortion in thelay regardless of the number of plies.

Constructed of superior quality materials toensure durability and longevity.

The Eastman motor is designed and manufacturedto disperse heat ef ciently and away from theoperator.

The Eastman 629X Blue Streak II is availablein eight sizes, four strokes, and a multitude ofelectrical speci cations.

Denim Brute MODEL 627X

The Denim Brute includes all features of thestandard 627X Brute plus a knife sliding oilingsystem; 1- stroke; abrasive belts; and a lowerhandle bracket. These features enable the Brute toef ciently cut multiple plies of heavyweight denimwith minimal operator fatigue.

MODEL 627X

With a super ef cient and extra powerful motor,the 627X Brute straight knife is designed to cutthe toughest fabrics or an increased number of ply.The model 627X Brute is Eastmans most powerfulstraight knife cutting machine and is available in thesame sizes, strokes, and electrical con gurations asour standard Blue Streak II cutting machine.

Eastmans exclusive Micro Fog machinemaximum heat reduction for cuttingfusible materials. The Micro Fog devicemist of coolant / lubricant behind the knife aout through a specially slotted knife-slidepenetrate every layer or material and to eliminathe conditions that cause fusing. The Mistraight knife requires 90-120 psi (6.2-8compressed air.

Micro Fog MODEL 629MF / 627MF

Brute Variable Speed

MODEL 627VS

Model 627VS is a standard Brute Straigenhanced with a variable speed motor to offincreased acceleration, and smoother operall while saving energy. It is the only cuttmachine on the market that runs at speeds up t4,000 RPMs.

Air Brute MODEL 627XP

The Air Brute is perfect for cutting ienvironment where electrically powered machincannot be used; or where there is extremand ber laden conditions. This pneumcontrolled straight knife is designed to cut fusibmaterials such as composites and berglas

Combines Blue Streak II or Brute straiwith: Heat reducing features (short stroke an

blade that reduce blade contact by 80% Eastmans special gravity feed moi

attachment to eliminate fusing. Coolant ow exactly metered to ach

desired degree of lubrication and coolirequired.

Plastic Master MODEL 629PM / 627PM

The Eastman line o straight kni e machines have set the industry standard or quality, per ormance, and engineerinor over 120 years. The Eastman 629X Blue Streak II and 627X Brute are designed to provide optimal per ormanc

whether cutting intricate jobs with small radius cuts or patterns that have long, clean cuts. The Eastman line ostraight kni e machines cut denim or silk, cotton or knits, sailcloth or synthetics, fberglass and technical textiles,easily and without e ort. Eastman straight kni e machines are available in a wide variety o strokes, heights, aelectrical confgurations to make your cutting department e fcient and productive.

Straight Knives

Brute


4/9

Round Knives


Plastic MasterMODEL 548PM

Rubber SlitterMODEL RS2

The Rubber Slitter is designed to cdense rubber and plastic sheeting. Modeis equipped with a high torque motor and designed with a very low knife speed to kefriction and heat build-up to a minimum. Iavailable with a base plate or strip gauge to cstrips with a tight tolerance.

This Cardinal model 548 is featured wEastman Plastic Master cooling/moistattachment combined with a special notcheblade. Together t hey reduce friction andwhich eliminates the fusing of temperatsensitive materials. The Plastic Master ad

all Cardinal series round knives.

The Heavy Duty and Super Duty roumachines can easily cut through high duromerubber as well as plastic sheeting and dense fabrithat require a more powerful motor and greatheight capacity. Each of these special Cround knife machines may be supplied withhigh speed, low speed, or dual speed mthe broadest range of applications. Both modemay be fitted with an optional Plasticlubricator.

Heavy Duty &Super DutySlitting Machine

MODEL / 567BK

The Cardinal standard slitting machinemounted in a stationary position, on a fwith a standard base plate con gurationfor most slitting applications. The standard narrprofile allows for clean slitting and snag-material ow.

Standard SlittingMachine

MODEL 548BK

LightweightMODEL 534

The smallest Cardinal, model 534, provideslightweight maneuverability with power to cut lowlays of wool, cotton, silk, synthetics, and technicaltextiles.

Super DutyMODEL 567

The Cardinal model 567, Eastmans most powerfulround knife, is equipped with the same high-torque motor and utility as the Brute straightknife. A dual speed option brings versatility tothis powerhouse.

Heavy DutyMODEL 562

The Heavy Duty Cardinal offers a heavy dutymotor to provide increased torque and bladespeed making it ideal for most general purposecutting of canvas, burlap, cotton, cotton batting,woolens, and knits.

StandardMODEL 548

The Cardinal model 548 is our most widely usedround knife machine. It is available in two differentblade sizes, and is designed with a lightweight,powerful motor to provide the optimum cuttingcon guration.

Carpet CutterMODEL 548CC

The Cardinal Carpet Cutter is designed to cutcleanly through most pile types and backings. The548CC allows for cutting along and against thegrain in curves, or along straight edges with minimaleffort thus reducing operator fatigue. The blade isgrooved to reduce heat and allow the blade to shedcarpet backing. The blades can also be Te oncoated for maximum heat reduction and the abilityto eliminate build up of cut material.

Eastman round kni e machines are ideally suited or cutting large radius curves, straight lines and are applicableor a wide range o di cult to cut materials. To match your cutting needs, the round knives are available withve di erent blade sizes, various horsepower ratings and custom engineered gear ratios. Eastman also o ers

high speed, carbon steel, grooved, and Tefon coated blades to maximize cutting throughput and increaseproductivity.


5/9

Rotary Shears & Small Round Knives


Eastman lightweight rotary shears are the best solution or cutting intricate markers, one-o -a-kind patterns,samples, reworks, and plastic or rubber sheeting. O ering the ultimate in maneuver ability, Eastman rotary shearsare the answer or short ru n cutting jobs common in the industry.Eastmans line o small round kni e machines set the standard or the cutting industry by providing agility, powerand versatility. Each small round kni e has a low pro le baseplate which allows or virtually no distortion whecutting through low lays, or single thickness, o material.

Workerbee PelicanMODEL WB-3M

The Workerbee Pelican is designed to cumaterials with ease. The Pelican head ison the Buzzaird air-powered shear as well.

The Buzzaird is designed with a 20,0pneumatic motor suitable for wet environmenIt is an extremely powerful rotary shearfor cutting single-ply leather, rubber, pwoven glass, coated materials, and muchAvailable options include a Pelican headsharpener. Optional swivel sharpener is equippwith a 30 degree ball tip shear plate for ctrimming.

Buzzaird PneumaticShear

MODEL BZ

WorkerbeeMODEL WB

The Workerbee is a powerful, professioncordless rotary shear. It is designed with the samprecision cutting features as our standard rotshears but with the convenience and portabilthat is afforded by battery power. The Workerbis equipped with a 2-1/32 (5.16 cm) blade7.2 volt battery pack - allowing for longebetween charges.

Gentle GiantMODEL BBS32

The BBS32 is Eastmans largest shear,a premium quality, high torque universato cut both lightweight material and heavy-dufabrics with ease. This machine is an economalternative for cutting through ne fabricslow ply delicate synthetics) without pulls orto the material. The Gentle Giant, like alround knives, is perfect for cutting largcurves and straight lines.

The Little Giant model BBB32 feature(8.26 cm) blade and a premium qualtorque universal motor which maintains its pounder heavy loads. This machine is an economialternative for cutting heavier weight materials suas upholstery and industrial fabrics.

Little GiantMODEL BBB32

ChickadeeMODEL D2

The Chickadee is the smallest rotary shear availableand is the perfect upgrade to, or replacementfor, hand held shears. Powered by EastmansPerma-Field motor, the Chickadee has 40% morepower than any other hand held knife its size.Its st reamlined, lightweight, construction helpseliminate operator fatigue.

Other features include: 2 (5.72 cm) round blade for general use

or hexagon blade for sheer or dif cult to cutcloth.

Cutting capacity is 25% greater than competitivemodels.

Built-in sharpener. Ergonomically designed Three different base plates and cutting tips can

be selected:- Stabilizer Shoe: the standard foot

attachment, a utility feature that lends itselfwell to all cutting and slitting operations.

- Ball Tip: best when slitting tubular knits orother loosely woven materials.

- Baseplate: a small baseplate fitted withneedle rollers to create a lightweight,freestanding rotary shear; provides thegreatest degree of accuracy from top tobottom ply.

Long HandledChickadee

MODEL D2H

Has all the features of the D2 model, in additionto a long handle and a remote power switch. Thisis the ideal companion to any spreading machinefor cutting out aws, or when laying up fabrics; thisallows the operator to reach across the table with

ease, thereby improving cutting quality.

Mini CutterMODEL MC-8

The Eastman MC-8 Mini-Cutter is a cordless cutterperfect for all light duty cutting needs. It slicesthrough all fabric, paper, and leather materialseasily. The MC-8 features a cordless, rechargeablesystem and can also operate with AC power.


6/9

End Cutters


The Eastman series o Falcon End Cutters p rovide the means to increase speed, e ciency and accuracy in yourend cutting operation. The track guide d Falcon enables the operator to make a ast, straigh t cut in virtually anymaterial, no matter how tough; including quilted abrics and oam up to 1- (3.20 cm) thick.

Falcon IV EndCutter

MODEL FAL-4

The Falcon IV gives you superior balance andeffortless cutting features: Perma-Field Motor for more cutting torque with

less heat build-up. Precision engineered profile and interior

reinforcing ribs keeps track rigid even at lengths

over 72. Clamping bracket allows the Falcon to be attachedto any type of cutting table in seconds.

Standard 40 (1.02m) length handle for useon tables up to 72 (1.83m) wide, with longerhandles available.

Other handle options include a push handle, adual push/pull handle for extremely wide cutsrequiring more than one operator, and a swivelhandle for limited space applications.

Patented Uni-Safe Terminal Block and AttachmentPlug allows the operator to engage the powersupply to the cutter with one hand.

Falcon 548 / 534MODEL 548FAL / 534FAL

Eastman equips Cardinal models 548 and 534 witha special baseplate and handle to work with theFalcon guide track. For increased cutting capacity. Higher torque motor for effortless operation. Cutting head moves easily across the track,

reducing operator stress. Falcon 548 cutting capacity up to 1 (2.54 cm). Falcon 534 cutting capacity up to (1.27 cm).

Falcon AirMODEL FAL-A

Eastmans Falcon Air has superior balance and aspecially designed Falcon track with air power todecrease heat build-up during cutting. The FalconAir is perfect for end cutting fusible materialssuch as heavy rubber and plastic sheeting or forcutting in wet environments where electricity isnot applicable.

The Auto Track Falcon II Pneumaticdesigned with all mechanical functions drivby compressed air; including the cuttingthe rodless traversing device and the liftimechanism. This enhances the durability aadaptability of the machine in environments wunreliable and uctuating power source.

Auto Track Falcon II

PneumaticMODEL ATF-IIP

Auto Track Falcon IIMODEL ATF-II

Eastmans Auto Track Falcon II offers atraversing of the cutting head and an automatlift feature. Both features enhance cycle time athroughput in comparison to manually operatemodels. The remote control enables the operatoto activate the Auto Track Falcons cuttias soon as the operator is nished pullindown the table. Cutting head traverses via servo- controlle

motor. Simplified controls for ease of o

interface. Ply counter and variable traverse

control. 4 (10.2 cm) round blade with up to

cm) cutting capacity. Remote control. Compression pressure foot ensures a c

for both heavy and soft materials.

Eastman has combined the power of the C548 round knife with a heavy duty ball beand rigid track system. The Heavy Duty Fa Quick-lift lifting device allowing for maspreading and cutting of goods such as heavwoolens, canvas and most industrial fabr548 Falcon has a cutting capacity of 1making it the industrys most powerful andcut-off machine.

Heavy Duty FalconMODEL 548FALHD5H


7/9

Drills and Marking and Special Applications

w w w . e a s t m a n c u t s . c o m 1

Hot Cloth DrillMODEL CD3H

The Hot Cloth drill leaves identi able marks onloosely woven, or knit fabrics, where an ordinarydrill mark would not be detected. The cloth drillfuses tightly woven synthetic materials, throughoutthe lay, thereby eliminating distortion in the marker.Along with the following additional features: Telescoping drive shaft with a powerful AC motor

for dependability and long service life. Drill available in three sizes, with numerous hole

diameters, and drill types.

Eastman drills and marking machines work through numerous layers o abric which allows or easy buttonholedarts, or pocket markings or sewing applications; in addition to other intermediate production step processes.Eastman drills and markers are available in both hot and cold con gurations, with a variety o drills and awls, and achoice o tips. Eastman also manu actures a large selection o special application products or pattern per orating,bundling, strip cutting and rag manu acturing.

CutmasterMODEL CUTMASTER

The Cutmaster is designed to cut up to(10.16 cm) of: belting; hook and loopbelt loop; nylon zipper; lace; webbing; compuwire; and more! Equipped with a computerized contr

digital display program for desired length annumber of cuts.

Automatic shut-off when operation is cor material supply runs out.

Guillotine blades provide sharp, cleacuts.

Hot blade for cutting and sealing sweaves.

The Threadmarker is a dual use machine thprovides a substitute method of short-termarking when a permanent mark is notand for bundling cut pieces. Utilizing athread is pulled through the material which allothe operator to determine where to place

darts, buttons, or pockets. The Threadmarkecan also be used to bundle continuous towelinor bundles of clothes by binding them with threprior to washing. Ensures matched pairs by eliminating l

patterns of varying sizes. Secures toweling, by preventing separati

tangling during the laundering process. Marking capacity of 6 (15.2 cm) w

looper mechanism for ease of operation.

ThreadmarkerMODEL LTM

Rag CutterMODEL WE

The Eastman Rag Cutter is equipped withduty motor and precision machined cutting heasuited for high output operations which requimaximum productivity. Available in melectrical con gurations; single or dual workmodels; and telescopic height adjustment. TCutter is adaptable to many applications.Hot Notcher

MODEL HVN

The Hot Notcher is a multi-purpose tool used formarking and temporarily fusing loosely wovenfabrics which can ensure precise alignment forsewing accuracy. The spread is held securelytogether and can be moved to the cutting areawithout shifting. The Hot Notcher marks a visiblenotch on materials instead of a slit notch which isnot easily visible.

Magnum PunchPerforator

MODEL MP2

The Eastman Magnum Punch Perforator cuts fourclean holes per inch (2.54 cm) through up to vethicknesses of paper. Punching strength is easilyadjusted to accommodate various needs; a singleswitch allows the operator to free wheel withoutpunching, single or continuous punch mode. Available in three punch sizes. Full line of pattern powder available in various

colors to suit any type of pattern fabric.

Cloth DrillMODEL CD3

The Eastman Cloth drill marker can drill holesthrough numerous layers of fabric, indicating buttonholes, darts, pockets, and other attachment points.This is perfect for use on loosely knit, bulky, orquilted spreads, where a mark is needed, but wherea burn mark would be unnecessary. Telescoping drive shaft and powerful AC motor

for dependability and long service.

Drill is available in three sizes, numerous holediameters, and drill types. Decreased distortion, even on bulky and

quilted spreads, provided by the large squarebaseplate.


8/9


9/9

garment industries cutting machines

Documents