HOTSTREAM : SUBSONIC ECO TUNNEL

HOT STREAM : SUBSONIC eco tunnel

Heart of the Lapauw HOT STREAM is the narrow dry chamber. When the air stream enters the 100 mm wide dry chamber, it accelerates in a calculated manner. This causes turbulences that shakes the garments as they pass through the dry zone. The result is a mechanical action that enhances the dewrinkling and assures a first class finish, irrespective of the garment type.

The narrow dry chamber also brings another advantage: The garments pass shoulder to shoulder through the chamber, leaving them fully exposed to the airstream. Needless to say that this provides optimal drying conditions.

HOT STREAM : subsonic ECO tunnel

Thanks to the narrow dry chamber, the HOT STREAM retains the hot air much better than the standard wide passage tunnel finisher, while High Density insulation covers the full length of the dry chamber in order to minimize the amount of heat escaping from the side.This results in an energy consumption up to 20% lower than standard wide passage tunnel finisher models.

Whatever the fabric…

Cotton overalls or poly/cotton T-shirts? The HOT STREAM handles any fabric.The programmable speed of the hot air stream, allows you to fine-tune HOT STREAM to the type of garments you pass through. That’s why our customers favor our Tunnel finisher for a wide range of garments: Including, thick cotton overalls, private garments of nursing home residents, Chefs Wear, Uniforms and many more.

Lapauw International NV · Oude Ieperseweg 139 · 8501 Kortrijk-Heule · Tel: +32 (0) 56 35 42 95

N.V./S.A.

HOT STREAM

GARMENT FINISHING

Lapauw International NV · Oude Ieperseweg 139 · 8501 Kortrijk-Heule · Tel: +32 (0) 56 35 42 95

N.V./S.A.

Technical specifications HOT STREAM Mono

Supply voltage 3 x 380-420VAC 50HZ +PE + N / 3 x 440-480VAC 60HZ +PE + N

Heating : Gas or SteamThe HOT STREAM is available with steam heating or gas heating. Both are indirect heating : With steam, the air flows over a steam heated battery. On the gas heated ironers, the flame goes through a closed pipe.

HOT STREAM

GARMENT FINISHING

MONO T1 MONO T2 MONO T3 MONO T4

Air speed hot air stream maximum air speed m³/hr

Programmable4000 8000 12000 16000

Fan motors kW 2 x 2,2 soft start

4 x 2,2 soft start

6 x 2,2soft start

8 x 2,2 soft start

Power suction fan 0,75 0,75 1,5 1,5

Production capacity items/hr ± 150 65/35 poly/cotton

± 350 65/35 poly/cotton

± 450 65/35 poly/cotton

± 600 65/35 poly/cotton

Dimensions

length mm 3768 5032 6290 5772

width mm 1195 1195 1195 1195

height mm 2510 2510 2510 2510

weight kg 1000 1700 2000 2600

Technical specifications HOT STREAM DuoWith the DUO, Lapauw offers high production HOT STREAM with a limited footprint.

DUO T2 DUO T3 DUO T4 DUO T5

Air speed hot air stream maximum air speed m³/hr

Programmable16000 24000 32000 40000

Fan motors kW 8 x 2,2 soft start

12 x 2,2 soft start

16 x 2,2soft start

20 x 2,2 soft start

Power suction fan 1,5 1,5 1,5 2 x 1,5

Production capacity items/hr ± 700 65/35 poly/cotton

± 85065/35 poly/cotton

± 100065/35 poly/cotton

± 120065/35 poly/cotton

Dimensions

length mm 3768 5032 6290 5772

width mm 2390 2390 2390 2390

height mm 2510 2510 2510 2510

weight kg 3400 4000 5200 5800

MONO T1 MONO T2 MONO T3 MONO T4

Gas burner power kW 52 52 90 189

DUO T2 DUO T3 DUO T4 DUO T5

Gas burner power kW 2 x 52 2 x 90 2 x 189 2 x 189