gardner-denver traveling blocks hook-block combinations
TRANSCRIPT
2201
GARDNER-DENVERPUMPS • RIG COMPONENTS • AJAXS PUMPS
TUFF-BREED® PARTS • MAYHEW19 RIGS
TRAVELING BLOCKSHOOK-BLOCK COMBINATIONS
TRAVELING BLOCKSGardner-Denver engineers have achieved a newratio of weight to rated capacity. This has addedup to 2,000 pounds of additional weight overcompetitive designs without increasing outsidedimensions. The result is a low center of gravityblock that falls faster and straighten Fabricatedsheaves, precision balanced, provide smoothoperation and are used in all sizes and in match-ing crown blocks.
HOOK-BLOCK COMBINATIONSGardner-Denver Trim-True blocks may beordered with your choice of unitized hook. Com-pletely built in to provide a single short blockassembly, it saves valuable space in short masts.The block case has been carefully designed withcountersunk bolts, pins and sheave guards. Theteardrop housing has smooth rounded edgesand recessed bolts and pins.
FABRICATED SHEAVESWire line groove is flame-hardened to retain shape toprolong wire line life. Large diameter sheaves. Uni-form in cross section and precision balanced.
HEAVY DUTY BEARINGSDouble row tapered roller bearings hold sheavesin alignment. Designed for radial and thrust loads.
INDIVIDUAL LUBRICATIONAll sheaves can be lubricated from either sideof block by their individual grease fittings.EASILY REMOVABLE SHEAVEGUARDSHeavy duty sheave guards are fastened to sideplates by through-pins which can be easilyremoved for reaving.SMOOTH TEARDROP HOUSINGTeardrop shaped housing has recessed bolts andpins as well as smoothly rounded edges. Sideplates are from heavy steel plate re-enforced atthe pin for extra strengthHEAVY STEEL CLEVIS PLATEPlate clevis is designed to permit raising of blockto vertical while hook is still on floor. Heavyconstruction provides high strength in clevis andpins.SIMPLE BAIL LOCK PINBail is easily removed and assembled by removingtapered threaded pin which is recessed in clevis.No large wrench nuts or hammer nuts to remove.
TRAVELING BLOCK SPECIFICATIONSMODEL
Depth Rating
Rated Capacity
No. o) Sheaves
Dia. ol Sheaves
Sheave Grooves
A
B
C
D
DD
E
F
G
Weight
ft.m.
tonKg.
in.mm.in.in.
mm.in.
mm.in.
mm.in.
mm.in.
mm.in.
mm.in.
mm.in.
mm.
ib.Kg.
55 T-66015,000 +
4,572 t
550
498,952
6
60
1,524
1%, 11/20r13/8
112%
2,858
10'/4
267
13
330
34
864
63
1,600
100
2,540
15
381
4
102
18,000
8.165
40 T-65010-20,000
3,048-6,096
400
362,874
6
50
1,270
1 3/8 or 1 1/4
95%
2.416
9ta234
12V4
311
31%
806
52</2
1,334
836/4
2,124
13
330
4
102
14,000
6,350
30 T-5428-14,000
2,438-4,267
300
272,155
5
42
1,067
11/«or11/S
78^*1,997
8
203
10
254
25
635
441/i
1,130
693/8
1,762
11</4
286
4
102
8,000
3,629
20 T-4365-10,000
1,524-3,048
200181,437
4
36914
iVsor 1
691/z
1,765
6'/2
165
8</2
216
22
559
383/4
984
6114
1,562
1Q</1>
267
4
102
5,000
2,268
12T-4304-8,000
1,219-2,438
125
113,398
4 or 3
30
762
11/8, 1 Of 7/8
581/41,480
55/8
143
7
178
ant511
33
838
513/4
1,314
854
210
ZH70
3,000
1,361
HOOK-BLOCK COMBINATION SPECIFICATIONSMODEL
Rated Capability
H
1
J
Weight
tonsKg.in.
mm.in.
mm.in.
mm.
Lb.Kg.
TBJ-40350
317,515
164
4,166
31%
806
52te
1,333
TBJ-30250
226,796
i33te
3,391
25
635
44fe
1,130
10,500
4,763
TBJ-20150
136,07811714
2,978
22
559
383/4
984
7,700
3,493
TBJ-12100
90,718
95'/4
2,419
20'/t
514
33
838
5,000
2,268
TWW-40350
317,515
141%
3,600
313/4
806
521*
1,333
19,000
8,618
TWW-30250
226,796
1193,023
25
635
44 15
1,130
10,500
4,763
TWW-20150
136.078
1032,616
20
508
X3A984
7,7003,493
TWW-12100
90,718
921/2
2,350
20(/4
514
33838
5,000
2,268
• GARDNER-DENVER PETROLEUM EQUIPMENT-
23
Specifications subject to change without notice.