Mini Sub Socket Weld Gauge Mini Sub Socket Weld Gauge #Gal-14

• Check Throat Dimensions - Sliding Pointer

• Check Lag Length

• Check All Pipe Schedule - Sliding Pointer

• All Stainless Steel

Mini Fillet Weld Keys Mini Fillet Weld Keys (11 sizes) Gal-16 Pocket size- Handy key chain holds set together

• Measures Fillet Weld Leg

• Measures Fillet Weld Throat

• 11 Different Sizes (Standard & Metric)

• All Gauges Stainless Steel

Pipe Pit Gauge Pipe Pit Gauge Gal-17

• Range os 0 to ½" in 1/64 & .020 increments

• Arm can be locked in place at any dimension

• All Stainless Steel

• Gauge fits in shirt pocket and comes with pocket protector

• Has handy formulas on front and decimal equivilents on back

Digital Weld Gauge NEW GAGE!! Digital Weld Gauge Gal-18 Abilities:

• Holds either the zero settings or measured value at any position for differential measurements

• Has a serial output to interface with a computer or printer to process data.

• Automatically turns on by moving the main scale or by pressing ON/OFF key.

• Automatically turns off after 4 minutes of inactivity..conserving power.

Features:

• Measures Butt Weld Reinforcement and Throat

• Slider Clamp Screw

• Output Connector

• LCD Display

• Hold Switch

• IN/MM Switch

• ON/OFF Switch

• Case and Battery Included

1/32 to 5/8 Taper Gauge Gal-28A 1/32 to 5/8 Taper Gauge

• Stainless Steel

• All increments permanently engraved

• Front side - Standard

• Back side - Metric

5/8 to 1 3/16 Taper Gauge Gal-28B 5/8 to 1& 3/16 Taper Gauge

• Stainless Steel

• All increments permanently engraved

• Front side - Standard

• Back side - Metric

1&3/16 to 2" Taper Gauge Gal-28C 1 & 3/16 to 2" Taper Gauge

• Stainless Steel

• All increments permanently engraved

• Front side - Standard

• Back side - Metric

Mini Pipe Gap-Clamps Model 1 #GAL GAP-1 - Mini Pipe Gap-Clamps Model 1 for up to 8" pipe. • All Mini Pipe Gap-Clamps are designed to position and hold open butt pipe spools to one another while those pieces are tack welded. Perfect for the welder working alone. • These Mini Gap-Clamps have been redesigned for ease in aligning and gapping at the same time. • They come 4 to a set, which includes a belt pouch for ease in carrying to the workplace, scaffolding, etc. • This design has been field proven, clamps are sturdy and with a minimum of maintenance, and may be used over and over for years. • Clamps made of stainless steel & brass.

Mini Pipe Gap-Clamps Model 2 #GAL GAP-2 - Mini Pipe Gap-Clamps Model 2 for up to 4" pipe. All Mini Pipe Gap-Clamps are designed to position and hold open butt pipe spools to one another while those pieces are tack welded. Perfect for the welder working alone. These Mini Gap-Clamps have been redesigned for ease in aligning and gapping at the same time. They come 4 to a set, which includes a belt pouch for ease in carrying to the workplace, scaffolding, etc. This design has been field proven, clamps are sturdy and with a minimum of maintenance, and may be used over and over for years. Clamps made of stainless steel & brass.

HI-LO Welding Gage Measures Hi-Lo Gauge Gal-1 • Slim design is 30% lighter! • Measures internal misalignment of pipe before and after tacking. • Measurements read in standard on one side & metric on opposite side. • This handy devise even measures scribe lines, crown height & weld fillet. • Measures internal alignment of pipe after fit-up/alignment, and cuts radiographic rejects.

Single Purpose Hi-Lo Gauge (English) Single Purpose Hi-Lo Gauge (English) Gal-2

• Standard/English Gauge

• Eliminates rejects, improves productiivity

• 1/32 or Zero Line

• Check Rootweld Space

• Checks Internal Misalignment

Adjustable Fillet Weld Gauge

Features:

• The Adjustable Fillet Weld Gauge can measure any fillet weld to 1/32” accuracy with just one simple-to-use gauge.

• Now you can measure fillet welds from 1/8” to 1” (with ± 1/32” accuracy) with one economical, simple to understand gauge.

• The G.A.L. Adjustable Fillet Weld Gauge uses an offset arm that slides at a 45° angle to make fillet weld length measurements.

• The gauge is calibrated to 32nds, with metric equivalents given, so you get more accurate readings.

• Four screws hold the offset arm in position for future adjustments.

• This gauge also measures weld throat thickness to 1/16th of an inch.

• Made of durable, rust resistant stainless steel

• It’s 2¼” x 3” slim design weighs only 1½ oz & fits easily into a shirt pocket.

• Measures both leg lengths and weld throat fillet weld thickness.

Bridgecam Gauge #GAL-4 - Bridgecam Gauge The following measurements are possible either in inches or millimeters with the Bridgecam Gauge: • Angle of preparation, 0º to 60º • Excess weld metal (capping size) • Depth of undercut • Depth of pitting • Fillet weld throat size • Fillet weld length • Misalignment (high-low)

Pocket Bridgecam Gauge Pocket Bridgecam Gauge Gal-4a The following measurements are possible either in inches or millimeters with the Pocket Bridgecam Gauge:

• Angle of preparation, 0º to 60º

• Excess weld metal (capping size)

• Depth of undercut by 1/32

• Depth of pitting 1/32

• Fillet weld throat size1/64 or .5mm

• Fillet weld length

• Misalignment (high-low)

• All stainless steel construction

V-WAC Weld Gauge V-WAC Weld Gauge Gal-5

• Checks undercut

• Crown Height

• Porosity & Pits

• Metric or English

• Quality stainless steel construction

A.W.S. Weld Gauge A.W.S. (Auto Weld Size) Weld Gauge

• Pocket sized

• Quality stainless steel construction

• Used to determine size of a fillet weld

• Checks permissible tolerance of convexity, concavity, and underfill

• Checks permissible tolerance of reinforcement

WTPS Gauge WTPS Gauge Gal-7 Measure Undercut. Undercut will be No more than .010 deep when the weld is transverse to the primary stress in the part that is undercut.

• Precision Made from Stainless steel

• All markings & dimensions are laser engraved

• Gauge set comes with a preciaion ground calibration block, ground to .0005 tolerance for accuracy

Fillet Weld Gauge Set Fillet Weld Gauge Set (7pcs) Gal-8a

• Quality stainless steel construction

• Knurled nut holds set together

• Allows fast accurate measurement of (11) different fillet weld sizes; concave or convex

• Sizes and numerals are etched into both sides for easy reading

Skew-T Fillet Weld Gauge Skew-T Fillet Weld Gauge Gal-9a

• Check Angle of Vertical Member

• Checks Weld Acute Side

• Checks Weld Ontuse Side

• Measures in English & Metric

Skew-T Fillet Weld Calculator Skew-T Fillet Weld Calculator

• A handy compliation of mathematical relationships between: Leg Length • Throats • Skew Angles and Inspection Dimensions.

• A must for designers and inspectors. • The perfect companion to the G.A.L. Skew-T Fillet Weld Gauge

Skew-T Fillet Weld Gauge with Calculator Skew-T Fillet Weld Gauge with Calculator Skew-T Fillet Weld Gauge

• Check Angle of Vertical Member

• Checks Weld Acute Side

• Checks Weld Ontuse Side

• Measures in English & Metric

Skew-T Fillet Weld Calculator

• A handy compliation of mathematical relationships between: Leg Length • Throats • Skew Angles and Inspection Dimensions.

• A must for designers and inspectors.

Pocket Fillet Weld Gauge Set

Pocket Fillet Weld Gauge Set (3 Pcs) Gal-10

• Pocket size - Measures 8 Size Fillets

• Checks leg length, throat size, plus allowable convexity

• All increments permanently engraved (Standard & Metric)

• Handy key chain holds set together

Inspection Tool Kit: Wrap-Around Pouch

#GAL-12 - Inspection Tool Kit with Wrap-Around Pouch.

This Kit comes with:

• Hi-Lo Gage

• Telescoping Oval Mirror

• Flashlight

• Fillet Weld Gages

• Chrome Rule

Dial / Pit Depth Gauge

Dial / Pit Depth Gauge Gal-13

Combination 0" - 10" Dial/Pit Depth Gauge

• Graduations 0.001"

• Accuracy meets or exceeds federal specs

• Continuous diam for ½" travel

• Revolution Counter

• Uniform pressure over full range of travel

• Complete with 6 extensions rods in fitted case

• Micro probes for small diameter pits 0.062 to 0.025

• Interchangeable bases