TANAGER INDUSTRIAL LUMINAIRE

© 2017, All rights reserved BaltLED, UABSpecifications are subject to change without notice. 1/5

L, mm W, mm H, mm

310 / 560 / 1060 / 1560 145.5 81 / 131.5* * With cable mounting

WARNING• Turn power off before inspection, installation or removal.• Properly ground electrical enclosure.• Luminaire may fall down if not installed properly.• Avoid direct eye exposure to the light source while it is on.• For indoor use only.• Dry location only.• Do not operate luminaire with damaged parts.• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.

• The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire shall be replaced.• The manufacturer shall not be liable for any damage resulting from inappropriate modifications to the luminaire or faulty installation.• If you have any questions, contact the manufacturer.

IP20

Surface mountingINSIDE THE BOX:

NEEDED FOR MOUNTING

Cable mounting

www.baltled.comSeptember 20, 2017

INSTALLATION GUIDE

TANAGER INDUSTRIAL LUMINAIRE

1

1. SURFACE MOUNTING

2

© 2017, All rights reserved BaltLED, UABSpecifications are subject to change without notice. 2/5

INSTALLATION GUIDE

3 4

6 SCREWING

8

5

7

www.baltled.comSeptember 20, 2017

9 10

© 2017, All rights reserved BaltLED, UABSpecifications are subject to change without notice. 3/5

INSTALLATION GUIDE

11 12

14

8

13

15

www.baltled.comSeptember 20, 2017

TANAGER INDUSTRIAL LUMINAIRE

1

2. CABLE MOUNTING

2

© 2017, All rights reserved BaltLED, UABSpecifications are subject to change without notice. 4/5

INSTALLATION GUIDE

3 4

6

8

5

7

www.baltled.comSeptember 20, 2017

TANAGER INDUSTRIAL LUMINAIRE

9

© 2017, All rights reserved BaltLED, UABSpecifications are subject to change without notice. 5/5

INSTALLATION GUIDE

13

8

12

14

10

www.baltled.comSeptember 20, 2017

TANAGER INDUSTRIAL LUMINAIRE