€¦ · fully integrated,yet flexible 01. entrance, lounge 02. main office 03. machinery shop ①,...
TRANSCRIPT
Fully Integrated,Yet FlexibleFully Integrated,Yet Flexible
01. Entrance, Lounge 02. Main Office 03. Machinery Shop ①, Test Shop ①, Auditorium 04. Cryogenic Test Shop
05. Machinery Shop ② 07. Foundry Office06. Foundry Shop, Molding Shop, Heat Treatment Furnace, Test Shop ②
08. Meterial R&D Center 09. Laboratory 11. Facility Maintenance Office10. Pattern Shop 12. After Sales Service Shop
13. Lounge 14. Pattern Warehouse ①
15. Painting Shop 16. Casting Warehouse 17. Health Clinic
18. Painting Shop 19. Test Shop ③ 20. R&BD Center 21. Packaging Shop 22. Production Warehouse ①
23. Office ③, Cafeteria, Production Warehouse ② 24. Receiring Inspection Shop
1
2
3
68
7
1112
13
14
15
18
1921
22 20
2423
10
45
16
17
9
MANAGEMENT POLICY
On the basis of "Base on Reliability” as a fundamental management philosophy, all employees at PK Valve Co., Ltd. respect human life and worker’s health care before all production activities, provide satisfactory products and services that meet the requirements of customers by means of management activities in harmony with environment and continuing technological development and quality innovations, and further make every effort to fulfill our social responsibilities and obligations with the realization of human happiness as our top priority, including the policies specified below.
• Recognize the Safety, Health, Environment & Quality (SHEQ) management as key factors in accomplishing our continuous stability and growth.we also comply with all legal and regulatory requirements, other applicable requirements as agreed and internal regulations that relate to safety, health, environment, and quality aspects.
• Improve and upgrade management system continuously through process improvement and technological development so that all the factors impeding safety, health, environment, and quality activities can be minimized.
• Establish and implement the management objectives and targets to accomplish our SHEQ management policy, and review and improve the continuing suitability of the management policy and system.
• Give careful consideration to safety, health, environment, and quality over the whole process ranging from product development, design, production, servicing, and disposal.
• Make every effort to prevent accidents by taking precautions to eliminate harmful and dangerous factors involving safety, health, and environment activities, and where an accident occur, take a proper measure to minimize the damage.
• Do our best to earn customer’s trust and love by grasping accurately the quality requirements of customer and furnishing the best quality products that always satisfy customer’s expectations and requests.
• Continuously give training to all PK Valve employees and other representatives who perform safety, health, environment, and quality related activities to inspire awareness and induce active participation.
PK_6
QUALITY APPROVAL
1. ASME-N (ASME) | May. 2009
2. ASME-NPT ( ASME) | May. 2009
3. ISO 9001 / BVQI (Bureau Veritas Quality International) Management System | Sep. 1993
4. ISO 14001 / BVQI (Bureau Veritas Quality International) Management System | Nov. 2005
5. OHSAS 18001 / BVQI (Bureau Veritas Quality International) Management System | Nov. 2005
6. KEPIC (Korea Electric Power Industry Code) MN | Aug. 1998
7. CE(Community of Europe) PED 97/23/EC | Jul. 2001
8. API (American Petroleum Institute) 6D | Mar. 1978
9. API (American Petroleum Institute) 600 | Nov. 2005
10. BV (Bureau Veritas) Steel Casting | Apr. 1986
11. DNV (Det Norske Veritas) Steel Casting | Feb. 1983
12. LR (Lloyd’s Register of shipping) Steel Casting | Oct. 1980
13. NK (Nippon Kaiji KyoKai) Steel Casting | Nov. 1981
14. KR (Korean Register of Shipping) Steel Casting | Oct. 1978
15. NEP (New Excellent Product) | Jan. 2006
3 4 5 2
7
15
1
6
10 141312
8 9
11
PK_7
• Selected as INNO-BIZ• Obtained CE (Community of Europe PED 97/23/EC) certifi cate• Obtained EM mark for high pressure Triple Offset Butterfl y Valve
• Listed approved valve manufacturer by ExxonMobil• Listed approved valve manufacturer by Shell Chemical• Obtained EM mark for Triple Offset Metal Seat Butterfl y Valve
• Listed as a manufacturer for installation of nuclear power plant at KEPCO (Korea Electric Power Corporation) / Non-Safely Class ANSI B31.1 Valves / Licence No.6• Obtained certifi cate of manufacturer for Nuclear Valve by Ministry of Science and Technology, Republic of Korea• Listed as manufacturer of Cryogenic Valve in KGC (Korea Gas Corporation) / List No.88-05
• Listed as a manufacturer for installation of nuclear power plant at KEPCO / Safety Class ASMEⅢ Valves• Listed as a manufacturer for installation of thermal & hydroelectric power plant at KEPCO
• Listed as a manufacturer for installation of nuclear power plant at KEPCO / ANSI B31.1 Motor Operated Valve
• Listed as a manufacturer for installation of nuclear power plant at KEPCO / ANSIⅢ Motor Operated Valve • Obtained ISO 9001 certifi cate by BVQI (Bureau Veritas Quality International)
• Approved API 600, API 603 & ASME / ANSI B16.34 Manufacturer by Mobil Research Development Corp
• Developed Bellows Seal Gate & Globe valve• Developed Metal Seat Ball valve• Developed Wafer Tilting Check valve• Started Low Fugitive Emission test
• Obtained TUV certifi cate by TUV Rheinland• Obtained EM (Excellent Machine, Mechanism and Material) mark for High-Pressure Metal Seat Tilting Check valve
• Developed Triple Offset Butterfl y Valve
• Developed Low Emission Packing for valve• Developed Super Duplex Stainless Steel for casting
• Obtained Quality Assurance Qualifi cation certifi cate by KEPIC
• Approved Fire Safe Ball Valves by AMTECH / API 607• Developed Pressure Seal Type Valves for high pressure and high temperature • Obtained Type Approval of Fire Safe Ball Valves by DNV
• Established Busan Pokum Ind. Company in Busan, Korea
• Reorganized Busan Pokum Ind. Co., Ltd.
• Obtained “KS” (Korean Industrial Standard) mark for Bronze & Cast Iron Valves / 5 Items (B2301, B2303, B2332, B2351, B2353)
• Removed all facilities and factory to Changwon Industrial Complex (Current Location)
• Obtained “KS” mark for Cast Steel & Marine Valves / 10 Items (B2361, B2363, B2365, B2367, V7311, V7313, V7314, V7323, V7324)
• Approved Steel Valves Manufacturer by API (American Petroleum Institute) / API 6D Pipe Line Valves (Gate, Check, Ball, Plug)
• Approved Carbon Steel & Stainless Steel Castings Manufacturer by KR (Korean Register of Shipping)
• Expanded laboratory by installing SPECTROMETER and other equipment• Obtained “KS” mark for Cast Bronze Valves / 2 Items (B2311, B2313)
• Renamed to Pan-Korea Metal Ind.Co., Ltd.• Approved Steel Casting Manufacturer by LR (Lloyd’s Register of Shipping)
• Designated as specialized installation of Power plant by Ministry of Commerce and Industry, Republic of Korea• Approved Steel Casting Manufacturer by NK (Nippon Kaiji Kyokai) / Licence No.81-49
• Approved Steel Casting Manufacturer by DNV (Det Norske Veritas)
• Developed Cryogenic Valves
• Listed as specialized installation of power plant at KHIC (Korea Heavy Industries & Construction Co., Ltd.)/ List No.86-020
• Affi liated as member of KAIF (Korea Atomic Industrial Forum)
• Obtained Certifi cate of Manufacturer for Emergency Shutoff Ball Valve by Government
• Approved Steel Castings Manufacturer by BV (Bureau Veritas)2001
2002
1988
1989
1992
1993
1994
1996
1998
2000
1999
1997
1987
1946
1968
1971
1974
1975
1978
1979
1980
1981
1983
1985
1986
PK_8
COMPANY HISTORY
2003
2005
2006
2008
2009
2010
2011
2007
• Listed approved valve manufacturer by Saudi Aramco• Joined NSSS(Nuclear Steam Supply System) for Motor Operated Valve as one of the Vendors
• Obtained ISO 14001, OHSAS 18001 by BVQI
• Appointed as excellent company for productivity improvement by Government
• Obtained ASME "N" & "NPT" certifi cates
• Award the biggest 88" valve
• Constructed a new Production Offi ce
• Established Material R & D Center
• Built a new R & BD Center
• Honored with "U$ 70 Millions Achievement Award" at the 44th Annual Trade Day• Awarded by Government for " New Technology Practicality Promotion " • Obtained the Patent of Live-loading Seat Supporting for Cryogenic Butterfl y Valves • Carried out the QME-1 test for NSSS (Nuclear Steam Supply System) By Wyle Laboratories
• Obtained NEP Mark for Cryogenic Metal Seated Butterfl y Valve• Changed company name and logo to PK Valve Co.,Ltd.&
PK_9
- GATE VALVES- GLOBE VALVES- SWING CHECK VALVES- TILTING DISC CHECK VALVES- DUAL PLATE CHECK VALVES
1.CAST STEEL VALVES
- GATE VALVES- GLOBE VALVES- SWING CHECK VALVES- TILTING DISC CHECK VALVES
2.PRESSURE SEAL VALVES
- BOLTED BONNET TYPE- PRESSURE SEAL BONNET TYPE
3.PARALLEL SLIDE GATE VALVES
- GATE VALVES- GLOBE VALVES- SWING CHECK VALVES
4.STAINLESS STEEL VALVES
- GATE VALVES- GLOBE VALVES- SWING CHECK VALVES- BUTTERFLY VALVES
5.CRYOGENIC VALVES
- GATE VALVES- GLOBE VALVES
6.BELLOWS SEAL VALVES
- TRIPLE OFFSET TYPE- DOUBLE ECCENTRIC TYPE- CONCENTRIC TYPE
7.BUTTERFLY VALVES
- GATE VALVES- GLOBE VALVES- LIFT CHECK VALVES- SWING CHECK VALVES
9.FORGED STEEL VALVES
10.ACCESSORY
8.BALL VALVES- FLOATING BALL- TRUNNION BALL
CONTENTS
MOTOR OPERATOR
AIR OPERATOR
PNEUMATIC ACTUATOR
AM
GEAR OPERATORG
HANDWHEEL
P
WCB
L
L
W
C
C
F
C
C
C
C
1
F
3
B
C
6
5
2
8
MC
LCB
LCC
WC6
C5
C12
CF8
CF8M
CF3M
API TR.11
2
5
8
0
1
2
L
H
1
1
1
S
S
API TR.2
API TR.5
API TR.8
API TR.10
API TR.11
API TR.12
API 603 S/S
API 600 S/S
CL 1501 5
CL 3003 0
CL 6006 0
CL 9009 0
CL 150051 0
CL 250052 0
CL 450054 0
CL 8008 0
RAISED FACE
BUTT WELD END
RING TYPE JOINT
WAFER
LUG
FLAT FACE
R F
B W
R T J
W A F
L U G
F F
N
NON NACE
NACE S B
E D
E L
F L
T R
OT B
OD B
G
P
R
B
C S
BOLTED BONNET
PRESSURE SEAL
REDUCE PORT
CRYOGENIC SEVICE
BELLOWS TYPE
FLOATING TYPE
TRUNNION TYPE
TRIPLE OFFSET TYPE
DOUBLE ECCENTRIC
SLURRY7
8
9
A
B
C
D
E
Y-GLOBE
ANGLE GLOBE
GLOBE CHECK
Y-GLOBE CHECK
ANGLE GLOBE CHECK
LIFT CHECK
GATE0
1
2
3
4
5
6
GLOBE
SWING CHECK
TILTING CHECK
PISTON CHECK
BALL
BUTTERFLY
DUAL PLATE CHECK
G
Example
1 R T J P S BC F 3 MN1 5 1 00
PK FIGURE NUMBER SYSTEM
PK_10
- GATE VALVES- GLOBE VALVES- SWING CHECK VALVES- TILTING DISC CHECK VALVES- DUAL PLATE CHECK VALVES
CAST STEEL VALVES
PK_11
• Several trim combinations available for various services.
• Straight-through port design offering a good flow with minimum frictional loss and turbulence.
• Cast steel valves suitable for works demanding strength, shock resistance, elongation and heat resistance.
• Bottom seating of seat rings ground accurately for maximum strength and tightness(globe).
• Bypass mounting to equalize pressures.
• Normal yoke bushing furnished with ductility resistant to high melting point of above 2200°F.
• Level and weight available to accelerate/decelerate disc closing (swing check).
• Designed for maximum flow with minimum pressure drop if possible.
• Precision-ground seating surfaces and revolving disc providing a long life.
In the refineries, power plants, utilities and petrochemical/chemical process industries, PK cast steel valves
have been regarded as of great importance about their excellent performance and reliability.
By discriminatory blending of carefully selected materials combined with sound design and precision
machining/assembly under strict quality controls, PK steel valves have gained general and wide acceptance.
The products are manufactured in accordance with ASTM, ANSI, or other international standards.
• Carbon Steel : ASTM A216-WCB or Equivalent
• Alloy Steel : ASTM A217-WC6, WC9, C5, C12, C12A or Equivalent
• Stainless Steel : ASTM A351-CF8, CF8M, CF3, CF3M, CN7M, or Equivalent
• Duplex Stainless Steel : ASTM A995-1A, 2A, 4A, 5A or Equivalent
• Special Alloy Steel : Inconel 625, Incoloy 825, Hastelloy C, Monel, AL-BRONZE
• ASME SA designation material(e.g ASME SA217-WC6)
SERVICE FEATURES
PRODUCTION MATERIALS
Type Class 150 300 600 900 1500
2-96
2-24
2-56
2-48
2-24
2-24
UNIT : NPS
2-80
2-24
2-48
2-48
2-24
2-24
2-48
2-24
2-48
2-48
2-24
2-24
2-48
2-24
2-36
2-36
2-24
2-24
2-24
2-24
2-24
2-24
2-24
2-24
GATE
GLOBE
SWING CHECK
TILTING CHECK
Y-GLOBE
ANGLE GLOBE
CAST STEEL VALVES
PK_12
CAST STEEL VALVES PRODUCTION RANGE
Gate valve is characterized by a sliding wedge which is moved by actuator perpendicular to the flow direction. There are a variety of valve sizes and types. The valve is used primarily as a stop valve to open or close fully. Normally it works for slurries, viscous fluid, etc.,but not for throttling. The gate valve usually has a minimum pressure drop in full open and a tight seal in full close, and therefore there is little possibility that contaminants may enter the valve.
The body and bonnet is designed to achieve most uniform distribution of stress on all sides and minimum turbulence and resistance to flow. The bonnet on valve is equipped with back seat ring up to 12" for Class 150 & 300 and up to 10" for Class 600 or higher. The yoke is integrated with bonnet.
Body-bonnet joint of gate valve is machined as follows:Class 150 ................................... Plain facedClass 300 and higher class ........ Male and femaleWe can supply any kinds of gasket as required by customer.
The valve is normally supplied with a one-piece flexible wedge of which the cross section is a tapered H shape.All wedges are fully guided. The flexible wedge is cast or machined with circumferential grooves to allow the seating faces to move independently and adjust the movement of body seat.It is used where the line load or thermal expansion of system may distort the seating face of valve, and especially uesful to prevent sticking that may happen in case the valve is closed at a hot temperature and opened at a cold temperature.Ideally the wedge is suitable for steam and other high temperature service.
FUNCTION
BODY AND BONNET
BODY-BONNET JOINT
WEDGE
GATE VALVES
PK_13
The seat ring as a welded-in type is designed to prevent any turbulence and damage by corrosion. It is forged or rolled
type into one piece for all dimensions, heat treated to obtain the desired surface hadness, and cleaned thoroughly
before assembling.
SEAT RING
The stem connection to the wedge shall have an integrated tee head (without welding)and is rectified in the packing
area to ensure a long life and perfect tightness. Through experiments,we have calculated and checked the connections
between stem and wedge not to disengage the stem from wedge while gate valve is working.
The strength of stem and wedge connections is stronger than that of stem alone at the root of thread.
STEM
The packing size is designed to secure maximum tightness along the stem, and the standard packing is a non-asbestos
type. We can supply any kinds of packing as required by customer.
PACKING
The stuffing box gives maximum packing stem seal.
Lantern ring and grease injector shall be furnished only if specified on the purchase order.
STUFFING BOX
The yoke sleeve is designed to able to be disassembled without discounting bonnet and stem, and provided with ball
bearing of 14" or over for Class 150 ~ 300 valves, 6"or over for Class 600, and 2" or over for Class 900 ~ 1500.
YOKE SLEEVE
Hand wheels are designed for easy operation. With gearing, motor actuator or cylinder actuator, it is also available for
more difficult services.
HAND WHEELS
The gland is made of two pieces. Packing gland is in contact with the packing which is connected to gland flange
through a spherical joint. Particular design permits a correct pressure on the packing without any damage to stem due
to friction or corrosion.
GLAND
Bolts and nuts are made from four different types of steel materials in conformity with the ASTM specification:
1) A307 Grade B : It has a minimum tensile strength of 55,000 pounds per square inch (3870kg/㎟).
The nuts normally used with machine bolts are a hot pressed steel conforming to ASTM specification A307, which is
usually applied to hinge bolts and nuts.
2) A193 Grade B7/B16 : It usually retains the strength well at an elevated temperature and offers higher resistance to
creep than any other high grade steel used as bolting materials. This steel is regularly used in bonnet bolts.
3) A194 Grade 2H/4 : The nuts of this grade shall be re-heated above the critical range of steel, quenched in a suitable
medium, and then tempered at a temperature not less than 850°F(455°C). This steel is regularly used in bonnet nuts.
4) Carbon steel : It is used in hand wheel nuts, set screws, or nipples.
BOLTS AND NUTS
PK_14
In our standard production of valves, the flange ends(RF.FF) and the face to face dimensinos conform to ANSI B16.5 and
ASME B16.10, respectively, and they have a raised face serrated finish type or other finish type as requested.
For butt-welded ends (B.W.), of which the end to end dimension conforms to ASME B16.10, customer must specify the
schedule type required, pipe class, or bore diameter.
Ring type joint flanged ends (R.T.J) conform to ASME B16.5 and the end to end dimension follows ASME B16.10. The other
special end connections may be supplied as required by customer.
END CONNECTIONS
Valves can be supplied with gear operators.
GEAR OPERATED VALVES
Valves can be supplied with actuators, either electric or pneumatic, accordings to customer’s requirements.
MOTOR OPERATED VALVES
We can supply a valve fitted with accessories such as bypass, locking device, chain wheel, extension stem, etc. For more
details, refer to the Accessories column.
ACCESSORIES
Packing material supplied in standard valves is non-asbestos graphite, with braided graphite rings and die-formed rings
configured to provide reliable and long-lasting performance. Braided rings are coated with zinc dust to inhibit corrosion.
Dieformed rings are 98% carbon(minimum)and have maximum 50PPM chloride 550PPM sulfur content.
For standard valves, gasket materials are as follows;
Class 150 - graphite sheet type with 304 stainless steel tanged insert. (1.6mm minimum overall thickness)
Class 300 - spiral wound 304 stainless steel and graphite.
Class 600 - same as class 300 or 900
Class 900 and 1500 - Ring type joint
PACKING AND GASKET MATERIALS
Cast steel valves are designed and manufactured to satisfy strict requirements in order to prevent external leakage and to
meet fugitive emission requirements of most customers.
Stuffing box finishes of 63 to 125 RMS, stem finishes of 16 to 32 RMS, control of straigntness and concentricity of stems,
and controlled diametrical clearances between stem and gland, stem and backseat, and gland and stuffing box, all combine
to quarantee consistent performance of stem seals.
Gasket surfaces between bodies and bonnets are strictly controlled to finishes of 32 to 63 AARH. When combined with
engineered bolting design, quality materials and strict assembly procedures, these finishes quarantee consistent sealing in
gasket areas.
SEAL AREA DESIGN
PK_15
NO PART NAME MATERIAL
123456789
1011121314151617181920212223
A216 - WCBA217 - CA1513 Cr. / STELLITE #6A276 - 410A276 - 410
A576 - 1020A276 - 304A193 - B7
A307 - BA194 - 2HA576 - 1020A576 - 1020 + CrA193 - B7A194 - 2HA576 - 1020A439 - D2CA47- 32510 + ZnSTEELSTEEL + CrDUCTILE IRONA53
A216 - WCBA351 - CF8MSS 316A276 - 316A276 - 316
A576 - 1020A276 - 316A193 - B7
A307 - BA194 - 2HA576 - 1020A479 - 410A193 - B16A194 - 4A576 -1020A439 - D2CA47- 32510 + ZnSTEELSTEEL + Cr DUCTILE IRONA53
A351 - CF8MA351 - CF8MMETAL TO METALA276 - 316A276 - 316
A276 - 316A276 - 316A193 B8M
A193 - B8A194 - 8A479 - 304A479 - 304A193 - B8A194 - 8A576 -1020 + ZnA439 - D2CA47- 32510 + ZnSTEEL +CrSTEEL +CrDUCTILE IRONA53
BODYDISCSEATHINGE PINSTOP PINSPRINGGUIDEWASHERSET SCREWEYE BOLTHINGE BOLTHINGE NUTHINGE PINPACKING GLANDBONNET BOLTBONNET NUTYOKE CAPYOKE SLEEVEHANDLE NUTSET SCREWNIPPLEGEAR BOXSTEM COVER
SS 400 or SS 304
INCONEL X-750 / SS 316
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
END CONNECTION
GOV (GEAR OPERATED)
H 1
øD1
L(RF), L1(BW)
H (O
PEN
)
øD
PK_16
STANDARD MATERIAL SPECIFICATIONS
DIMENSION AND WEIGHTCLASS 150 UNIT : mm
SIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
177.8215.9200
-339
-16
3
203.2282.4224
-441
-29
4
228.6304.8250
-535
-43
6
266.7403.431525073595072
8
292.1419.1355250927
1071116
10
330.2457.2400355
11251260173
12
355.6501.7450355
13171462263
14
381.0571.5500355
15501658388
16
406.4609.6560500
18231830535
18
431.8660.4630500
19002058648
20
457.2711.2710630
21202268822
24
508.0812.8800630
250226601276
26
558.8--
710-
29501552
28
609.6-
900710
287330521777
30
609.6-
900710
306632682119
CLASS 300 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
215.9215.9200
-340
-22
3
282.4282.4224
-442
-41
4
304.8304.8250
-536
-59
6
403.4403.4355250745895119
8
419.1419.1400355951
1087193
10
457.2457.2450355
11421269291
12
501.7501.7500355
13251470410
14
762.0762.0560500
16311669687
16
838.2838.2630500
16921849876
18
914.4914.4710630
190920651201
20
990.6990.6800630
211922721500
24
1143.01143.0
900710
249226672258
26
1244.6--
800-
30573026
28
1346.2--
800-
32653450
30
1397--
900-
34754147
CLASS 600 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
292.1292.1200
-394
-35
3
355.6355.6250
-475
-64
4
431.8431.8355
-591
-110
6
558.8558.8450355801995222
8
660.4660.4500500
10051233405
10
787.4787.4630500
11921360626
12
838.2838.2
-630
-1605878
14
889.0889.0
-630
-17921165
16
990.6990.6
-710
-20791490
18
1092.21092.2
-710
-21601836
20
1193.81193.8
-800
-23662410
24
1397.01397.0
-900
-27403639
26
1447.8-
900-
30024437
28
1549.4--
900-
32355589
30
1651--
900-
34806933
CLASS 900 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
368.3368.3250
-474
-73
3
381.0381.0355250623678103
4
457.2457.2355250718900159
6
609.6609.6500500958
1112318
8
736.6736.6630500
12901322568
10
838.2838.2710630
14511542908
12
965.2965.2
-710
-17861234
14
1028.71028.7
-710
-17921628
16
1130.31130.3
-710
-19552288
18
1219.21219.2
-900
-23083025
20
1320.81320.8
-900
-24663850
24
1549.41549.4
-900
-28895200
CLASS 1500 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
368.3368.3250
-474
-81
3
469.9469.9355
-603
-141
4
546.1546.1400355730880227
6
704.9704.9560500944
1106515
8
831.9831.9800630
12051350992
10
990.6990.6900710
141415701603
12
1130.31130.3
-800
-18262572
16
1384.4-
1092800
212923415255
PK_17
The globe valve is used where throttling alone or both throttling and shutoff is needed. It may also be used for
on-off service, but because of high pressure drop, such application is limited to the cases that the valve is
normally closed and the pressure drop is of no importance in valve open condition.
PK cast steel globe valve is regularly made in outside screw and yoke design with full-way type disc.
The body has a spherical form with large radius, which permits the stress, turbulence and resistance to flow to be kept minimum. The bonnets on valve are equipped with back seat rings.
Body-bonnet joint of globe valve is machined as follows:All .............................. Male and female.We can supply any kinds of gasket as required by customer.
The valve is normally supplied with plug type disc.
All stem have the turning and rising cut ACME threads.
The valve is normally supplied with bottom seated type on 8" or larger valves, and the disc has bottom guide type seat rings.
FUNCTION
BODY AND BONNET
BODY-BONNET JOINT
DISC
STEM
SEAT RING
18
GLOBE VALVES
PK_18
The packing size is designed to secure maximum tightness along the stem, and the standard packing is a non-asbestos type. We can supply any kinds of
packing as required by customer.
PACKING
The yoke nuts on globe valve are threaded and mounted to the bonnet, where it is secured with tack
welding.
YOKE BUSH
19
The stuffing box gives maximum packing stem seal. Lantern ring and grease injector shall be furnished only
if specified on the purchase order.
STUFFING BOX
Hand wheels are designed for easy operation. They are provided with hammer blow type of 8" and over for Class 150 valves, 6" and over for Class 300 and, 4" and over for Class 600, and 2.5" and over for Class 900 & 1500. With gearing, motor actuator or cylinder actuator, They are also available for more difficult services.
HAND WHEELS
The gland is made of two pieces. Packing gland is in contact with the packing which is connected to gland flange through a spherical joint. Particular design permits a correct pressure on the packing without any
damage to stem due to friction or corrosion.
GLAND
PK_19
STANDARD MATERIAL SPECIFICATIONS
NO. PART NAME MATERIAL
123456789
1011121314151617181921222324
A216 - WCBA216 - WCBA217 - CA15+STLA479 - 410DUCTILE IRONA216 - WCB+STLA479 - 410
A283 - DA307 - BA194 - 2HA576 - 1020A576 - 1020+CrA193 - B7A194 - 2HA439 - D2CA479 - 410A563 - ADUCTILE IRONA283 - DDUCTILE IRONA53
A217 - WC6A217 - WC6A217 - CA15+STLA479 - 410DUCTILE IRONA217 - WC6+STLA479 - 410
A283 - DA307 - BA194 - 2HA576 - 1020A479 - 410A193 - B16A194 - 4A439 - D2CA479 - 410A563 - ADUCTILE IRONA283 - DDUCTILE IRONA53
A351 - CF8MA351 - CF8MA351 - CF8+STLA479 - 304DUCTILE IRONA351 - CF8+STLA479 - 304
A351 - CF8A193 - B8A194 - 8A479 - 304A479 - 304A193 - B8A194 - 8A439 - D2CA479 - 304A194 - 8DUCTILE IRONA283 - DDUCTILE IRONA53
BODYBONNET DISCSTEMHAND WHEELBODY SEAT RINGBACK SEAT RINGGASKETPACKINGGLAND FLANGEHINGE BOLTHINGE NUTHINGE PINPACKING GLANDBONNET BOLTBONNET NUTYOKE BUSHLOCK NUTHANDLE NUTSHAKE ADAPTERHANDLE COVERGEAR BOXSTEM COVER
GRAPHITE+GRAPHITE WITH INCONEL WIRESPIRAL WOUND / GRAPHITE+304+304
GOV (GEAR OPERATED)
H 1
øD1
L(RF), L1(BW)
H (O
PEN
)
øD
PK_20
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
END CONNECTION
DIMENSION AND WEIGHTCLASS 150 UNIT : mm
SIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
203.2203.2200
-284
-14
3
241.3241.3250
-344
-27
4
292.1292.1315
-388
-43
6
406.4406.4355
-505
-91
8
495.3495.3355450623577178
10
622.3622.3400450805626256
12
698.5698.5400500839800409
14
787.4787.4
-560
-922616
16
914.4914.4
-630
-980825
18
978.0978.0
-630
-1140960
20
978.0--
800-
18251387
24
1295.4--
800-
20291988
CLASS 300 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
266.7266.7200
-286
-20
3
317.5317.5250
-346
-37
4
355.6355.6315
-392
-58
6
444.5444.5355
-618
-140
8
558.8558.8400500793805260
10
622.3622.3450560
1145880422
12
711.2711.2500630
1260971567
16
863.6863.6
-710
-1120975
18
914.4--
710-
12201700
20
1016.0--
800-
16742090
24
1346.2--
800-
20863481
28
1498.6--
800-
23384590
CLASS 600 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
292.1292.1224
-392
-35
3
355.6355.6315
-478
-63
4
431.8431.8315
-531
-120
6
558.8558.8450500675689233
8
660.4660.4
-560
-754415
10
787.4787.4
-630
-959652
12
838.2838.2
-800
-16901316
14
889.0--
800-
18711565
16
990.6--
800-
20152120
18
1092.2--
800-
24493110
20
1193.8--
800-
25043490
24
1397.0--
800-
25954320
30
1651.0--
800-
323710800
CLASS 900 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
368.3358.3315
-498
-77
3
381.0381.0315
-513
-103
4
457.2457.2355400605600177
6
609.6609.6450560730710388
8
736.6736.6710630894970655
12
965.2965.2
-710
-11011288
14
1029-
900-
1913-
1500
CLASS 1500 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
368.3358.3315
-497
-77
3
469.9469.9355
-584
-147
4
546.1546.1400400714700262
6
704.9704.9500630
10651105669
8
831.9831.9800710
119111001187
14
990.6990.6
-800
-12061827
PK_21
The swing check valve is designed so that it is opened automatically at the forward flow and closed at the reverse flow in horizontal or vertical (upward flow only through valve) piping runs. It has an advantage of low pressure drop and therefore is best suitable for velocity application.
The body has a spherical form with large radius, which permits the stress, turbulence and resistance to flow to be kept minimum.
Body-cover joint of swing check valve is machined as follows:Class 150 ..................................Male and female.Class 300 and 600 ................... Male and female.Class 900 higher class ............. Ring type joint.
We can supply any kinds of gasket as required by customer.
In our standard production of valves, the flange ends (RF) and the face to face dimensinos conform to ANSI B16.5 and ASME B16.10, respectively, and they have a raised face serrated finish type or other finish type as requested.For butt-welded ends (B.W), of which the end to end dimension conforms to ASME B16.10, customer must specify the schedule type required, pipe class, or bore diameter.Ring joint flanged ends (R.T.J) conform to ASME B16.5 and the end to end dimension follows ASME B16.10. The
other special end connections may be supplied as required by customer.
The seat ring as a welded-in type is designed to prevent any turbulence and damage by corrosion. It is forged or rolled into one piece for all dimensions, heat treated to obtain the desired surface hardness, and cleaned thoroughly before
assembling.
FUNCTION
BODY
BODY-COVER JOINT
END CONNECTIONS
SEAT RING
• Body penetration is sealed with blind flange and spiral-wound gasket• Arm pin is located near the disc center of gravity, minimzing sealing surface radius rotation and thus velocity.
HINGE ARRANGEMENT
• Hydrofoil profile maintains the disc stability while being lifted by a hydrodynamic force at a flow including pulsating. • Heavy-balanced weight insures that disc goes to seat immediately upon cessation of flow and minimizes water hammer.
ARM ARRANGEMENT
SWING CHECK VALVES
PK_22
STANDARD MATERIAL SPECIFICATIONS
NO. PART NAME MATERIAL
123456789
1011121314
A216 - WCBA216 - WCBA217 - CA15+STLA216 - WCBA479 - 410A576 - 1020+STL(S20C)A307 - B
SOFT STEELA193 -B7A194 - 2HA194 - 8304 S.S304 S.S
A217 - WC6A217 - WC6A217 - CA15+STLA216 - WC6A479 - 410A182 - F11+STLA479 - 304
304 S.SA193 -B16A194 - 4A194 - 8304 S.S304 S.S
A351 - CF8A351 - CF8A351 - CF8+STLA351 - CF8A479 - 304A240+304+STLA479 - 304
304 S.SA193 - B8A194 - 8A194 - 8304 S.S304 S.S
BODYBONNET DISCARMROD PINBODY SEAT RINGPLUG BOLTGASKETPLUG GASKETBONNET BOLTBONNET NUTDISC NUTPINWASHER
SPIRAL WOUND / GRAPHITE+304+304
L(RF), L1(BW)
H
PK_23
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
END CONNECTION
DIMENSION AND WEIGHT
SIZE
L
L1
H
WEIGHT(kg)
CLASS 150 UNIT : mm2
203.2203.216016
3
241.3241.319026
4
292.1292.122545
6
355.6355.626078
8
495.3495.3320136
10
622.3622.3350214
12
698.5698.5380319
14
787.4787.4405412
16
863.6863.6460514
18
977.9977.9505749
20
977.9977.9570933
24
1295.41295.4
6801346
26
1295.4-
8651727
28
1447.8-
9181964
30
1524-
9622247
SIZE
L
L1
H
WEIGHT(kg)
CLASS 300 UNIT : mm2
266.7266.716021
3
317.5317.519942
4
355.6355.622754
6
444.5444.5278124
8
533.4533.4322222
10
622.3622.3383291
12
711.2711.2435444
14
838.2838.2510632
16
863.6863.6521786
18
977.9977.9572
1058
20
1016.01016.0
6221210
24
1346.21346.2
7121916
26
1346.2-
9792000
28
1498.6-
9832600
30
1593.9-
11153664
SIZE
L
L1
H
WEIGHT(kg)
CLASS 600 UNIT : mm2
292.1292.119731
3
355.6355.621056
4
431.8431.8256103
6
558.8558.8329204
8
660.4660.4364342
10
787.4787.4464624
12
838.2838.2486776
14
889.0889.0572938
16
990.6990.6660
1250
18
1092.21092.2
7111518
20
1193.81193.8
7872390
24
1397.01397.0
8643686
26
-144810284000
30
1651-
11355502
SIZE
L
L1
H
WEIGHT(kg)
CLASS 900 UNIT : mm2
368.3368.326768
3
381.0381.0290106
4
457.2457.2306139
6
609.6609.6338294
8
736.6736.6460525
10
838.2838.2500731
12
965.2965.2578
1025
14
1028.71028.7
6471444
16
1130.31130.3
7101850
18
1219.21219.2
7852610
20
1320.81320.8
8503407
24
1549.41549.410065842
SIZE
L
L1
H
WEIGHT(kg)
CLASS 1500 UNIT : mm2
368.3368.326773
3
469.9469.9296125
4
546.1546.1355212
6
704.9704.9465470
8
831.9831.9540825
10
990.6990.6657960
12
1130.31130.3
7281510
16
1384.31384.311164630
PK_24
Today, higher velocity and pressure of piping often requires a sophisticated check valve rather than conventional swing type valve. PK tilting disc check valve is designed to handle such higher velocities, prevent damages due to turbulence and avoid “water hammer”phenomenon in piping systems, and it is closed quickly and quietly. The valve is closed quickly because its pivot(hinge pins) is shut by a very small arc.Moreover, line fluid flows both over and under the disc, so that valve closing is cushioned by the line fluid itself. By virtue of quick and quiet closing ability, up to now PK tilting disc check valve has earned good reputation as a “non-slam”check valve.
FUNCTION
Body-cover joint of swing-check valve are machined as follows:Class 150 ................................................. Male and female.Class 300 and 600 .................................. Male and female.Class 900 and 1500 ................................. Ring type joint.We can supply any kind of gasket per customer requirements.
BODY
Seat rings are welded into valve bodies in order to prevent turbulence and avoid damage due to corrosion seats, forged or rolled in one piece for all dimensions, heat treated to obtain the required surface hardness,
and perfectly cleaned before assembly.
SEAT RING
Our standard production covers valves with; FLANGED ENDS(RF) that conform to ASME B16.5 and face to face dimensions that conform to ASME B16.10, with a raised face serrated finish or, on request, with any other finish;BUTT-WELDING ENDS(B.W) with end to end dimensions that conform to ASME B16.10;(Customer must specify the schedule required, or class of pipe, or diameter and bore.)RING JOINT FLANGED ENDS(R.T.J) that conform to ASME B16.5 and with end to end dimensions to ASME B16.10; Other special end connections are supplied to customer requirements.
END CONNECTIONS
TILTING DISC CHECK VALVES
PK_25
STANDARD MATERIAL SPECIFICATIONS
NO. PART NAME MATERIAL
123456789
1011121314
A216 - WCBA216 - WCBA216 - WCB+STLA576 - 1020+STL(S20C)
A479 - 410A479 - 304A193 - B7A194 - 2HA576 - 1020A193 - B7A194 - 2H
A307 - B
A351 - CF8A351 - CF8A351 - CF8+STLA240 - 304+STL
A479 - 304A479 - 304A193 - B8A194 - 8A240 - 304A193 - B8194 - 8
A307 - B+Cr
BODYBONNET DISCBODY SEAT RINGGASKETHINGE PINBUSHINGBONNET BOLTBONNET NUTCOVERCOVER BOLTCOVER NUTCOVER GASKETEYE BOLT
SPIRAL WOUND / GRAPHITE+304+304
SPIRAL WOUND / GRAPHITE+304
A217 - WC6A217 - WC6A217 - WC6+STLA182 - F11+STL
A479 - 410A479 - 304A193 - B16A194 - 4A240 - 304A193 - B7A194 - 2H
A307 - B
L(RF), L1(BW)H
PK_26
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26” AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
END CONNECTION
SIZE
L
L1
H
WEIGHT(kg)
CLASS 150 UNIT : mm2
203.2203.215219
3
241.3241.319031
4
292.1292.119554
6
355.6355.624294
8
495.3495.3298163
10
622.3622.3320257
12
698.5698.5384383
14
787.4787.4381494
16
863.6863.6465617
18
977.9977.9517899
20
977.9977.9579
1120
24
1295.41295.4
5971615
26
1295.4-
8202072
30
1524-
9702696
SIZE
L
L1
H
WEIGHT(kg)
CLASS 300 UNIT : mm2
266.7266.716325
3
317.5317.520250
4
355.6355.620577
6
444.5444.5331149
8
533.4533.4298266
10
622.3622.3345349
12
711.2711.2425533
14
838.2838.2490758
16
863.6863.6494943
18
977.9977.9554
1270
20
1016.01016.0
5781452
24
1346.21346.2
6902299
26
1346.2-
9092400
28
1498.6-
9773120
SIZE
L
L1
H
WEIGHT(kg)
CLASS 600 UNIT : mm2
292.1292.117037
3
355.6355.619067
4
431.8431.8225124
5
558.8558.8305245
8
660.4660.4379410
10
787.4787.4466749
14
889.0889.0520
1126
16
990.6990.6534
1500
18
1092.21092.2
6971822
20
1193.81193.8
6952868
28
1600.2-
11765810
26
1447.8-
12165560
30
1651-
13067150
SIZE
L
L1
H
WEIGHT(kg)
CLASS 900 UNIT : mm3
381.0381.0288127
4
457.2457.2292167
5
609.6609.6378353
8
736.6736.6448530
10
838.2838.2510877
16
1130.31130.3
9482220
SIZE
L
L1
H
WEIGHT(kg)
CLASS 1500 UNIT : mm2
368.3368.326088
4
546.1546.1350254
3
469.9469.9288150
14
1257.31257.3
8733582
10
990.6990.6633
1152
6
704.9704.9434564
8
831.9831.9512990
12
1130.31130.3
7221812
15
1384.31384.3
9485556
DIMENSION AND WEIGHT
PK_27
1 1/2”(40A) - 84”(2100A)NORMINAL SIZE
FLUID
RATING
END CONNECTION
TEMP. RANGE
BODY
MATERIAL DISC
SEAT
SPRING
RANGE APPLICATION
Stanless Steel (304, 316 etc) Inconel (625, X750 etc)
Rubber (EPDM, Buna-N etc.) Metal (Stainless Steel, Stellite #6 etc.)
Carbon Steel (A216-WCB etc.) Stainless Steel (CF8, CF8M, CF3 etc.)B148-C95800, Special Steel (Alloy etc.)
A126-CLB, A536 Gr. Carbon Steel (A216-WCB etc.) Stainless Steel (CF8, CF8M, CF3 etc.)B148-C97800, Special Steel (Alloy etc.)
-50 ~ 600℃
Wafer, Lugged, Flanged
JIS 10K, 20K, 30K, ANSI 150#, 300#, 600#, 900#, 1500#, PN 10, 16, 20, 40, AWWA C 207
Water, Air, Steam, Gas, Sea Water
Dual plate check valves are supplied retainerless as standard. Our patented design does not have any threaded plugs in the pressure boundary and totally eliminates the potential leakpath to atmosphere. This design meet fugitive emission control.
TYPICAL CONSTRUCTIONS
- Dual plate Check Valve is economical on installation and maintenance because installation is required less and light weight.
- Dual plate Check Valve is possible to prevent water hammering due to closing valve disk by operating the spring in
valve before back flow. Also Due-Check valve prevents large piping the for big gap water levels.
- Dual plate Check Valve can apply variously in piping line because of less than existing Check Valve on restrictions
of instaling direction.
- Life spans is longer than existing Check Valve, and preservation and repair are simple.
- It's possible to reduce maintenance fee due to longer durability than existing check valve, easy maintenance.
VALVE FEATURES & ADVANTAGES
UPPER TEMPERATURE LIMITS LOWER TEMPERATURE LIMITS
MATERIAL TEMPERATURE LIMITS
MATERIAL UPPER LIMIT F(℃)
316SS
INCONEL X 750
MONEL
HASTELLOY
ALLOY20
BUNA-N(NBR)
EPDM
PTFE
METAL OVELAY
METAL TO METAL
250(121)
1000(537)
400(204)
800(426)
250(121)
250(121)
300(149)
450(232)
AS BODY
AS BODY
MATERIAL LOWER LIMIT F(℃)
WCB
LCC
CF8M
BUNA-N(NBR)
EPDM
VITON
PTFE
METAL TO METAL
-20(-28.9)
-50(-45.6)
-450(-268)
-70(-56.7)
-14(-11.4)
-40(-40)
-200(-129)
AS BODY
DUAL PLATE CHECK VALVES
PK_28
- Flange dims to ANSI B16.5 (MSS-SP44>24")- Face to face dims to API 594
- Flange dims to API 605- Face to face dims to API 594
- Flange dims to API 6A- Face to face dims to API 6A
- Flange dims to ANSI B16.5- Face to face dims to API 6D
- Flange dims to ANSI B16.5
•ASME 150 TO 1500 LB, PN 10 TO 40. •JIS & KS 5K TO 20KPRESSURE CLASSES
Dual plate check valves are supplied retainerless as standard. Our patented design does not have any threaded plugs in the pressure boundary and totally eliminates the potential leakpath to atmosphere. This design meet fugitive emission control.
RETAINERLESS DESIGN
The seat is designed equal pressure at the plate with the state of stationary hour. The shape of rubber seat could not be changed even in many operation because of having its most hardness satisfaction. The metal to metal seated valve is tested to API 598.
SEAT
The two semicircle plate responsiveness of opening and closing is quick and it is strong against corrosion also has a strong durability.
DISC (PLATE)
The springs have been designed to endure stresses and also ensure operating without failure for much cycles.
SPRING
Fully Rubber Lined Valves to avoid corrosion Inside are available.
RUBBER LINED
• ANSI B16.5
• API 605
• API 6A
• API 6D
• JIS 2210 & KS B1511
• EXTENDED BODY
Retainerless design supplied as standard
- Flange dims to ANSI B16.5 (MSS-SP44>24")- Face to face dims to API 594
- Flange dims to ANSI B16.5 (MSS-SP44>24")- Face to face dims to API 594* Threaded lug type also available
WAFER TYPE FLANGED TYPE SOLID LUG TYPE
NOMINAL SIZE RANGEASME 150 Ib.2" to 60"ASME 300 Ib.2" to 40"ASME 600 Ib.2" to 36"ASME 900 Ib.2" to 36"ASME 1500 Ib.2" to 24"
Larger diameter valves for the respectivepressure classes can be designed andmanufactured on request.
STANDARD DESIGN
PK_29
DUAL PLATE CHECK VALVE TYPES
Wafer Retainerless Flanged Retainerless
Solid Lug Retainerless Hub Ended
STANDARD MATERIAL SPECIFICATIONS
NO. PART NAME MATERIAL
123456789
10
BODYDISCSEATHINGE PINSTOP PINSPRINGGUIDEWASHERSET SCREWEYE BOLT
A216 - WCBA351 CF8MSS 316A276 316A276 316INCONEL X-750A276 316A276 316A193 B7SS400 or SS304
A351 CF8MA351 CF3M13 CRA276 410A276 410SS 316A276 410A276 304A193 B8SET SCREW
A351 CF3MA217 CA15STELLITE $6A276 304A276 304
A276 304
A193 B8mSS304
PK_30
DIMENSION AND WEIGHTCLASS 150 UNIT : mm
SIZE
ØD
Ød
L
2”
1026060
3”
1338773
4”
17111373
6”
21916698
8”
276207127
10”
337260146
12”
406300181
14”
448339184
16”
511387191
18”
546438203
20”
603487219
24”
714580222
CLASS 300 UNIT : mmSIZE
ØD
Ød
L
2”
1086060
3”
1468773
4”
17811373
6”
24816698
8”
305207127
10”
359260146
12”
419300181
14”
483339222
16”
537387232
18”
594438264
20”
651487292
24”
772580318
CLASS 600 UNIT : mmSIZE
ØD
Ød
L
2”
1086060
3”
1468773
4”
19111379
6”
264166137
8”
317207165
10”
397260213
12”
454300229
14”
489339273
16”
562387305
18”
610438362
20”
679487368
24”
787580438
CLASS 900 UNIT : mmSIZE
ØD
Ød
L
2”
1406070
3”
1658783
4”
203113102
6”
286166159
8”
356207206
10”
432260241
12”
495300292
14”
518339356
16”
571387384
18”
635438451
20”
695487451
24”
835580495
CLASS 1500 UNIT : mmSIZE
ØD
Ød
L
2”
1406070
3”
1718783
4”
206113102
6”
279166159
8”
349207206
10”
432260248
12”
518300305
14”
575339356
16”
638387384
18”
702438468
20”
752487533
24”
899580559
⑨
⑥ ⑧ ⑦
① ② ④
⑤
⑨
øD
ød
PK_31
- GATE VALVES- GLOBE VALVES- SWING CHECK VALVES- TILTING DISC CHECK VALVES
PRESSURE SEAL VALVES
PK_33
- BODY AND BONNET- BODY : Flow areas are designed for minimum turbulence and pressure drop.- BONNET : Ample stuffing box and stellite back seat are to guide accurately stem and back seat.
When designing a PK valve, casting of body and bonnet shall be considered thoroughly as a quality requirement.
Type A
Type C
Type B
Type D
GATEClass 600,900,1500 & 2500Size 4" & smallerGLOBEClass 600,900,1500Size 4" & smallerClass 2500Size 3" & smaller
GATEClass 600,900,1500 & 2500Size 6" & largerGLOBEClass 600,900,1500Size 6" & largerClass 2500Size 4" & larger
SWING CHECKClass 600,900,1500 & 2500Size 6" & largerClass 2500Size 4" & larger
- BONNET TYPE
CONSTRUCTION
Pressure seal valves are intended for high pressure and high temperature appilications in all types of fluid, except where severe coking may occur.A selection of design and material would give an excellent service in nuclear steam generating stations, industrial/chemical plants and thermal power plants.The pressure seal valves provide the most efficient use for folw passage and sealing, and result in significant weight saving and ease and simple installation and maintenance. Manufacturing and quality assurance procedures include extra controls of dimensional and non-destructive examinations and tests on critical areas such as gasket sealing, weld ends, or stellite sealing surfaces.
DESIGN
600 900 1500 2500
2 - 602 - 242 - 242 - 242 - 242 - 24
2 - 482 - 242 - 422 - 422 - 242 - 24
2 - 482 - 242 - 422 - 422 - 242 - 24
2 - 482 - 242 - 422 - 422 - 242 - 24
CLASS
TYPE
UNIT : NPS
GATEGLOBE
SWING CHECKTILTING CHECK
Y-GLOBEANGLE GLOBE
PRODUCTION MATERIALS- Carbon Steel : ASTM A216-WCB or Equivalent
- Alloy Steel : ASTM A217-WC6,WC9,C5,C12,C12A,
ASTM A182-F91 or Equivalent
- Stainless Steel : ASTM A351-CF8,CF8M,CF3,CF3M,
CN7M or Equivalent
- Duplex Stainless Steel : ASTM A995-1A,2A,4A,5A or Equivalent
- Special Alloy Steel : Inconel 625, Incoloy 825, Hastelloy C,
Monel ASME SA designation material(e.g ASME SA217-WC6)
PRESSURE SEAL VALVES
PK_34
SWING CHECKClass 600,900,1500 & 2500Size 4" & smallerClass 2500Size 3" & smaller
A segment thrust ring absorbs all the thrusts applied by internal pressure. A protective ring made by hardened stainless steel prevents the deformation on the top surface of soft metal gasket. The gasket can be removed smoothly without any damage on the sealing surface of body.
Large and high pressure valve may require a tremendous amount of torque to open or close the valve. Ball bearing in the yoke sleeve will reduce the operating torque of valve by up to 50 percent.
STANDARD PRESSURE SEAL DESIGN
BEARING INSERT TYPE YOKE SLEEVE
A flexible wedge is a one piece and fully guided cast with a central hub allowing the seating faces to move reciprocally and thus compensating for the distortion on body seats due to thermal expansion or pipe loads.Seat ring and wedge seating face are set to 9°angle from the vertical to minimize the sliding contacts between wedge and seat ring while opening or closing them.Wedging helps lead to a tight seal in a low differential pressure service.A flexible wedge resists wedge sticking or binding in a service. The wedge may be closed in a hot condition and opened in cold. The seating surface are stellited to provide high cycle capability in a very high differential pressure service.
All gate and globe valves have a two-piece packing gland to minimize the scoring on valve stem which may occur if tightened unevenly. Gland bolts remain fastened to the bonnet. They swing out of the way to simplify the packing replacement and are oriented to adjust the packing from one side of valve.
Deep stuffing boxes are standard type for gate and globe valves.They allow for extra packing to ensure more reliable stem seal and sufficient packing depth containing an optional lantern ring in the middle of box. where lantern ring is included, a tapped and plugged hole is made. If specified, a ball grease injector can be fitted with.
FLEXIBLE GATE
PACKING ADJUSTMENT
DEEP STUFFING BOXES
CASS GATE GLOBE
600
900
1500
2500
SIZE 6 & LARGER
SIZE 6 & LARGER
UNIT : NPS
SIZE 2 & LARGER
SIZE 2, 2 1/2 & 6 LARGER
SIZE 3 & LARGER
GATE VALVES
PK_35
1.The gate valve is normally used for on-off service. It is not recommended for throttling.
2.The gate valve is normally installed to pipe horizontally and the valve stem stands vertically. It can also be mounted to the vertical direction with the stem facing to the opposite or other directions except the vertical, provided that a special construction is prepared depending on the valve size , service conditions, or materials. In case of valve purchase for a special purpose other than the normal installation, the orientation of valve should be specified.
3.After the gate valve is closed completely with a sufficient force enough to shut off, the stem should be backed slightly about 1/8 to 1/4 turn to relieve the load on stem. This will cause the stem to expand a little without valve bending or damage, not affecting the valve shutoff.
SERVICE RECOMMENDATION
NO. PART NAME MATERIAL
123456789
1011121415161720232425272829303132
BODYBONNET WEDGESTEMHAND WHEELBODY SEAT RING BACK SEAT GASKETPACKINGGLAND FLANGEGLAND BOLTGLAND NUTPACKING GLANDBONNET BOLTNUTGEAR BOXSTEM PROTECTORYOKEYOKE BOLTNUTBONNET CLAMPRETAINERADAPTER RINGHAND WHEELYOKE CAPYOKE SLEEVE
GRAPHITE+GRAPHITE WITH INCONEL WIRE
A216 - WCBA216 - WCBA216 - WCB+STLA479 - 410A53A576 - 1020+Cr(S20C)A216 - WCB+STLSOFT STEEL
A283 - DA193 - B7A194 - 2HA576 - 1020+CrA193 - B7A194 - 2HDUCTILE IRONA53A216 - WCBA193 - B7A194 - 2HA576 - 1045A576 - 1045+CrA576 - 1045+CrA197A576 - 1045A439 - D2C
A217 - WC6A217 - WC6A217 - WC6+STLA479 - 410A53A182 - F11+STLA217 - WCB+STL304 S.S
A283 - DA193 - B7A194 - 2HA479 - 410A193 - B16A194 - 4DUCTILE IRONA53A216 - WCBA193 - B7A194 - 2HA576 - 1045A240 - 304A240 - 304A197A576 - 1020A439 - D2C
STANDARD MATERIAL SPECIFICATIONS
L(RF), L1(BW)
H1
HW (HAND WHEEL OPERATED)H
(OPE
N)
øD
PK_36
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
END CONNECTION
DIMENSION AND WEIGHTCLASS 600 UNIT : mm
SIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
292.1177.8200
-507
-29
3
355.6254.0250
-588
-52
4
431.8304.8355
-710
-121
6
558.8457.2
-355
-1160189
8
660.4584.2
-500
-1302339
10
787.4711.2
-500
-1480497
12
838.2812.8
-630
-1697758
14
889.0889.0
-630
-18251057
26
1447.81447.8
-900
-31185010
30
16511651
-900
-33837033
15
990.6990.6
-710
-21481549
18
1092.21092.2
-710
-23542183
20
1193.81193.8
-800
-27412763
24
1397.01397.0
-900
-30423915
CLASS 1500 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
368.3215.9315
-586
-40
3
469.9304.8355
-712
-66
4
546.1406.4400
-856
-121
6
704.9558.8
-500
-1065312
8
831.9711.2
-630
-1300458
10
990.6863.6
-710
-17451121
12
1130.3990.6
-710
-19081344
14
1257.31066.8
-800
-20401658
26
-1473.2
-900
-32367015
30
21592032
-900
-4329
19320
16
1384.31193.8
-900
-22132064
18
1536.71346.2
-900
-23502883
20
1663.71473.2
-900
-29505678
24
1943.11397.0
-900
-32185360
CLASS 900 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
358.3215.9315
-586
-33
3
381.0304.8355
-628
-59
4
457.2355.6355
-740
-110
6
609.6508.0
-500
-1151227
8
736.6660.4
-500
-1355349
10
838.2787.4
-630
-1626622
12
965.2914.4
-710
-1764922
14
1028.7990.6
-710
-19341493
16
1130.31092.2
-710
-21601638
18
1219.21219.2
-900
-25122284
20
1320.81320.8
-900
-27503577
24
1549.41549.4
-900
-30004338
CLASS 2500 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
450.9279.4315
-586
-47
3
577.9368.3355
-693
-75
4
573.1457.2450
-805
-129
6
914.4609.6
-500
-1165379
8
1022.4762.0
-710
-1500654
10
1270.0914.4
-800
-17401276
12
1422.41041.4
-900
-21001910
14
-1117.6
-900
-20802420
16
-1244.6
-900
-25403238
18
-1397.0
-900
-29005944
PK_37
1.The globe valve is normally installed with flow direction and pressure under the disc. In case the flow in valve directs to the opposite direction, always check at factory before installing the valve. Under a certain service condition, especially when a valve is equipped with cylinders or electric motor actuators, there is a cost advantage in designing and installing the valve flow over the disc. If the actuator is sized to such condition, care must be taken to install the valve
correctly.
2. The globe valve is suitable for most throttling applications; however, it must not be used for a prolonged throttling at 10% open or less, which may cause excessive vibration, noise or damage to disc and seat. Use of small valves with a lower flow capacity may permit the valve to be opened to a greater percentage, and thus avoid damage. For continuous severe throttling, a control valve is required.
SERVICE RECOMMENDATION
NO. PART NAME MATERIAL
123456789
101112141516171921222325262728293031
BODYBONNET DISCSTEMHAND WHEELBODY SEAT BACK SEAT GASKETPACKINGGLAND FLANGEGLAND BOLTGLAND NUTPACKING GLANDBONNET BOLTBONNET NUTGEAR BOXLOCK NUTYOKEYOKE BOLTYOKE NUTBONNET CLAMPRETAINERADAPTER RINGSTEM PROTECTORHANDWHEELYOKE BUSHHANDLE NUT
GRAPHITE+GRAPHITE WITH INCONEL WIRE
A216 - WCBA216 - WCBA216 - WCB+STLA479 - 410STEELA216 - WCB+STLA216 - WCB+STLSOFT STEEL
A283 - DA193 - B7A194 - 2HA576 - 1020+CrA193 - B7A194 - 2HDUCTILE IRONA479 - 410A216 - WCBA193 - B7A194 - 2HA576 - 1045A576 - 1045+CrA576 - 1045+CrA53DUCTILE IRONA439 - D2CA563 - A
A217 - WC6A217 - WC6A217 - WC6+STLA479 - 410STEELA217 - WCB+STLA217 - WCB+STL304 S.S
A283 - DA193 - B7A194 - 2HA479 - 410A193 - B16A194 - 4DUCTILE IRONA479 - 410A216 - WCBA193 - B7A194 - 2HA576 - 1045A240 - 304A240 - 304A53DUCTILE IRONA439 - D2CA563 - A
STANDARD MATERIAL SPECIFICATIONS
GLOBE VALVES
L(RF), L1(BW)
H1
H (O
PEN
)
øD
HW (HAND WHEEL OPERATED)
PK_38
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
END CONNECTION
DIMENSION AND WEIGHTCLASS 600 UNIT : mm
SIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
292.1177.8224
-406
-25
3
355.6254.0315
-557
-44
4
431.8304.8315
-556
-73
6
558.8457.2
-500
-802158
8
660.4584.2
-560
-980413
10
787.4711.2
-630
-1060475
12
-812.8710
-1324
-672
16
-990.6
-800
-16081900
18
-1092.2
-900
-20382989
CLASS 900 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
368.3215.9315
-575
-49
3
381.0304.8315
-585
-76
4
457.2355.6355
-669
-119
6
609.6508.0
-560
-894355
8
736.6660.4
-630
-983586
10
838.2787.4
-630
-1069700
CLASS 2500 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
450.9279.4355
-565
-56
3
577.9368.3400
-870
-121
4
673.1457.2
-450
-903337
6
914.4609.6
-710
-1130579
8
1022.4762.0
-800
-12781085
10
1270.0914.4
-900
-16761913
CLASS 1500 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
368.3215.9315
-575
-60
3
469.9304.8355
-658
-91
4
546.1406.4400
-765
-132
6
704.9558.8
-630
-850420
8
831.9711.2
-710
-1220668
10
990.6863.6
-800
-1353934
12
-990.6
-900
-16581995
14
-1067
-900
-18582035
All globe valves are equipped with hammer blow type handwheels.Two integrally-cast lugs on the upper side of the handwheel strike a steel crossbar simultaneously.
Bearings for easy operation.
Gland bolts and gland shelves facilitate re-packing.
Segmental thrust ring absorbs all the thrusts applied by internal pressure.
The seat face of integral body is faced with stellite 6
ACME threads machined accurately prolong the life of stem and bushing.
Inner row of studs establish the initial seal of the pressure seal joint.
Outer row of studs secures the yoke arm to the body.
By inserting knockout pin into a drilled hole, segmental thrust ring can be easily driven out of the retaining groove.
Stream line contour of body makes simple application and insulation cost reduction with a remarkable saving in both space and weight.
The stellited back seat area provides an accurate guide for stem.
A hardened stainless steel protective ring prevents deformation of the top portion of the soft metallic gasket.
The bonnet joint shall remain tight under all operating conditions as the sealing pressure is always much greater than the fluid pressure in the line, thereby eliminating any leakage. The higher internal pressure, the greater sealing pressure. The gasket can be removed freely without any damage to the sealed of the body.
PK_39
1.The swing check valve shall be opreated in a manner to avoid the following troubles;1)Formation of excessive high surge pressure as a result of valve closing, and2)Rapid fluctuating movement of valve closing member. The excessively high surge pressure by valve closing is prevented by closing the valve fast enough not to develop a significant reverse flow on a sudden shutoff which is a source of the surge pressure. Thus, the closing speed of valve should match closely with the speed of forward flow retard.The rapid fluctuating movement of valve closing member must be avoided to prevent the moving valve parts from excessive wear which may result in early failure of valve. Such movements can be precluded by sizing the valve to a flow rate
which forces the closure member not to move.
2.The swing check valve can also be mounted to the vertical position, provied the disc should not reach the valve position. However, the closing moment of disc by weight is very low in fully-opened position, so the valve tends to close late.In order to overcome such slow response to flow retardation, the disc
may be supplied with a lever-mounted weight or with spring loaded.
SERVICE RECOMMENDATION
NO. PART NAME MATERIAL
123456789
1011121314151617181920
BODYBONNET DISCARMROD PINBODY SEAT RINGPLLG BOLTGASKETPLUG GASKETBONNET BOLTBONNET NUTDISC NUTPINWASHERBONNET CLAMPRETAINERADAPTER RINGSEALING BOLTSEALING NUTEYE BOLT
A216 - WCBA216 - WCBA216 - WCB+STLA216 - WCBA479 - 410A576 - 1020+STL(S20C)A307 - BSOFT STEELGRAPHITEA193 - B7A194 - 2HA194 - 8304 S.SA240 - 304A576 - 1045A576 - 1045+CrA576 - 1045+CrA479 - 410A194 - 2HA307 - B
A217 - WC6A217 - WC6A217 - WC6+STLA217 - WC6A479 - 410A182 - F11+STLA479 - 304304 S.S304 S.SA193 - B16A194 - 4A194 - 8304 S.SA240 - 304A576 - 1045A240 - 304A240 - 304A479 - 410A194 - 2HA307 - B
STANDARD MATERIAL SPECIFICATIONS
SWING CHECK VALVES
L(RF), L1(BW)
H
PK_40
The sealing mechanism through spindle is the same construction as the pressure seal bonnet.
Inner row of studs establish the initial seal of the pressure seal joint.
By inserting knockout pin into a drilled hole, segmental thrust ring can be easily driven out of the retaining groove.
Segmental thrust ring absorbs all the thrusts applied by internal pressure.
The gasket can be removed freely without any damage to the sealed area of the body. The bonnet joint shall remain tight under all operating conditions as the sealing pressure is always much greater than the fluid pressure in the line, thereby eliminating any leakage. The higher internal pressure, the greater sealing pressure.
A hardened stainless steel protective ring prevents deformation of the top portion of the soft metallic gasket.
Seat rings are stellite faced and securely welded in place.
To ensure a secure connection between the arm and the disc nut, split pin is used.
DIMENSION AND WEIGHT
DESIGN DATA FEATURES
SIZE
L
L1
H
WEIGHT(kg)
CLASS 600 UNIT : mm2
292.1177.821434
3
355.6254.024843
4
431.8304.828748
6
558.8457.2350106
8
660.4584.2410217
10
787.4711.2465369
12
838.2812.8510503
14
889.0889.0535588
16
990.6990.6574798
18
1092.21092.2
7221277
SIZE
L
L1
H
WEIGHT(kg)
CLASS 900 UNIT : mm2
368.3215.924331
3
381.0304.824246
4
457.2355.630072
5
609.6508.0362232
8
736.6660.4420318
10
838.2787.4480660
12
965.2914.4628606
18
1219.21219.2
7462650
20
1320.81320.8
8883060
24
-1549.410704010
SIZE
L
L1
H
WEIGHT(kg)
CLASS 1500 UNIT : mm2
368.3215.924334
3
469.9304.830052
4
546.1406.434090
6
704.9558.8378181
8
831.9711.2435346
10
990.6863.6505546
12
1130.3990.6605828
14
1257.31066.8
6561200
15
1384.31193.8
6681941
20
1663.71473.2
8083228
SIZE
L
L1
H
WEIGHT(kg)
CLASS 2500 UNIT : mm2
450.9279.424632
3
577.9368.331056
4
673.1457.234592
6
914.4609.6400219
8
1022.4762.0451460
10
1270.0914.4542713
12
1422.41041.4
7181446
14
-1117.6
6791568
18
-1397.0
8272500
1.Comply with the following standards; ASME B16.25, B16.34, MSS-SP-25, API 600 Style A.2.The butt-welded end details of PK standard product shall be prepared in accordance with ASME B16.25
PK_41
• Quick closing system• Stability at low and pulsating flow• Moderate pressure drop• Tight sealing of metal seats
Seat contacts don’t occur until the disc is seated and closed.
TILTING DISC CHECK ADVANTAGES
A high performance tiling disc check valve has double offset pivot (hinge pin) design.The pivot offsets are made when constructing the valve with hinge pins which are located behind the centerline of sealing surface and slightly to one side of pipe centerline.The offset purpose is to reduce rubbing and thus wear between seat and
seal while valve is travelling.
DOUBLE OFFSET
The hinge pin is located in the centerline of disc seal surface.
OFFSET 1
The hinge pin is offset to the conical axis.
OFFSET 2
1.The center of gravity of disc is very close to the axis or rotation, so that the disc can be opened or closed very quickly without damage to the body, disc or seat. Since the valve is closed quickly upon flow reversal significant fluid velocities are not developed in the reverse direction, therefore minimizing the effects of water hammer.
2.The tilting disc check valve has greater stability at low flow rates and in pulsating service when compared to a swing check valve.
3.The pressure drop across a tilting disc check will usually be much less than for an equivalent life check. Although a tilting disc check valve will restrict flow slightly more than a swing check, the straight-through flow
path provides a minimal pressure drop.
4.Tilting disc check valves have moderate sealing capability and can provide tight shutoff if the differential pressure across the disc is relatively large.
SERVICE RECOMMENDATION
TILTING DISC CHECK VALVES
PK_42
DESIGN DATA FEATURES 1. Face to face & end to end dimensions : ASME B 16.102. Flanged dimensions : ASME B 16.53. Butt welded end dimensions :ASME B 16.254. Valve size (if applicable) and ratings :ASME B 16.34
5. Wall thickness dimensions of valves comply with API 600
NO. PART NAME MATERIAL
123456789
101112131415161718
BODYBONNET DISCHINGE PINBODY SEAT RINGCOVERGASKETCOVER GASKETBONNET BOLTBONNET NUTBUSHINGBONNET CLAMPRETAINERADAPTER RINGCOVER BOLTCOVER NUTHINGE PIN NUTEYE BOLT
A216 - WCBA216 - WCBA216 - WCB+STLA479 - 410A576 - 1020+STLA576 - 1020SOFT STEELGRAPHITEA193 - B7A194 - 2HA479 - 304A576 - 1045A576 - 1045+CrA576 - 1045+CrA193 - B7A194 - 2HA194 - 2HA307 - B
A216 - WC6A216 - WC6A217 - WC6+STLA479 - 410A182 - F11+STLA240 - 304304 S.S304 S.SA193 - B16A194 - 4A479 - 304A576 - 1045A240 - 304A240 - 304A193 - B16A194 - 4A194 - 2HA307 - B
STANDARD MATERIAL SPECIFICATIONS
Hinge pinThe hinge pins for supporting the disc are inserted through capped and gasketed bearing bosses in the outlet section of body. Sealing mechanism by hinge pins is the same as pressure seal bonnet.
Seat RingSeat ring is hardfaced for a long life and securely welded in place.
DiscConical seating has a structure of self-alignment, tightening and closing in no flow condition.
Pressure seal bonnetA simple design has segmental retaining ring and soft steel gasket to aid disassembly and provide maximum bonnet seal.
Retainer RingSegmental retainer ring absorbs all the thrusts applied by internal pressure.
PK_43
SIZE
L
L1
H
WEIGHT(kg)
CLASS 1500 UNIT : mm2
368.3215.918541
3
469.9304.823062
4
546.1406.4250108
6
704.9558.8266217
8
831.9711.2298415
10
990.6863.6437655
12
1130.3990.6459994
14
1257.31066.8
5131500
16
1384.31193.8
6032329
18
1536.71346.2
6332600
20
-1320760
3060
SIZE
L
L1
H
d
THK°
CLASS 2500 UNIT : mm2
450.9279.418638.138
3
577.9368.324057.267
4
673.1457.222472.9110
5
914.4609.6254
111.0263
8
1022.4762.0385
146.1552
10
1270.0914.4464
184.2856
12
1422.41041.4
538219.01735
14
-1117.6
786241.31900
SIZE
L
L1
H
WEIGHT(kg)
CLASS 900 UNIT : mm3
381.0304.823055
4
457.2355.625086
6
609.6508.0252278
8
736.6660.4347382
10
838.2787.4391690
12
965.2914.4470727
16
1130.31092.2
5902189
SIZE
L
L1
H
WEIGHT(kg)
CLASS 600 UNIT : mm2
292.1177.819141
3
355.6254.020552
4
431.8304.824558
6
558.8457.2257127
20
1193.81193.8
590-
DIMENSION AND WEIGHT
L(RF), L1(BW)
H
PK_44
Parallel slide gate valves are ideal for high temperature and pressure line to prevent thermal binding.
Features and benefi ts
SPRING
BLEED HOLE
FLOW
Parallel slide construction can be furnished for high differential pressure services or where thermal expansion may cause sticking of a wedge type.
The parallel slide gate assembly consists of two interchangeable spring loaded discs, a fully guided disc holder, and retaining pins.
Springs are fitted between discs to provide initial sealing force only, and do not maintain the sealing force.
Discs are interchangeable which simplifies in-line maintenance and eliminates the need to custom fit the seats to the discs.
Position seating eliminates stress and potential binding due to thermal expansion of the stem.
No additional torque required to achieve a positive seal once disc are in position.
Lower seating torque to reduce actuator size and cost
Hardfaced seating surfaces provide high cycle capability in very high differential pressure services
By-pass valves are used to reduce the traversing differential pressure across the valve seat.It reduces the size of the operating gear and also provide a convenient means for the initial warming through of pipe lines
Equalizing devices are used to relieve the fluid trapped between the seat forces, and to provide an outlet for the fluid displaced by the valve stem traversing to the shut position.
PARALLEL SLIDE GATE VALVE
PK_46
øD1
L(RF), L1(BW)
H 1
HW (HAND WHEEL OPERATED)
H (O
PEN
)øD
NO. PART NAME MATERIAL
123456789
101112131415161718192021222324252627282930
A216 - WCBA216 - WCBA216 - WCB+STLA479 - 410A53A575 - 1020+STLA479 - 410
A105A193 - B7A194 - 2HA575 - 1020+CrA193 - B7A194 - 2HA215 - WCBA479 - 410A283 - DA575 - 1020A194 - 2HA283 - DINCONEL X - 750A576 - 1020A575 - 1020+ZnDUCTILEA53A576 - 1020A439 - D2CA47 - 32510+ZnSTEEL
A217 - WC5A217 - WC5A217 - WC5+STLA479 - 410A53A182 - F11+STLA479 - 410
A105A193 - B7A194 - 2HA479 - 410A193 - B16A194 - 4A217 - WC5A479 - 410A283 - DA576 - 1020A194 - 2HA283 - DINCONEL X - 750A576 - 1020A576 - 1045+ZnDUCTILEA53A576 - 1020A439 - D2CA47 - 32510+ZnSTEEL
A217 - C12AA217 - C12AA217 - C12A+STLA479 - 410A53A182 - F91+STLA479 - 410
A105A193 - B7A194 - 2HA479 - 410A193 - B16A194 - 4A217 - C12AA479 - 410A283 - DA575 - 1020A194 - 2HA283 - DINCONEL X - 750A576 - 1020A576 - 1045+ZnDUCTILEA53A576 - 1020A439 - D2CA47 - 32510+ZnSTEEL
BODYBONNET DISCSTEMHAND WHEELBODY SEAT RINGBACK SEAT RINGGASKETPACKINGGLAND FLANGEGLAND BOLTGLAND NUTPACKING GLANDBONNET BOLTBONNET NUTDISC GUIDEPACKING BUSHYOKEYOKE BARYOKE NUTSTOPPERCOIL SPRINGSTOP BARSPRING WASHERGEAR BOXSTEM PROTECTORYOKE CAPYOKE SLEEVEHINGE NUTNIPPLE
GRAPHITE+GRAPHITE WITH INCONEL WIRESPIRAL WOUND / GRAPHITE+304+304
STANDARD MATERIAL SPECIFICATIONS
BOLTED BONNET TYPE
PK_48
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
END CONNECTION
DIMENSION AND WEIGHTCLASS 150 UNIT : mm
SIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
177.8215.9200
-490
-16
3
203.2282.4224
-590
-29
4
228.6304.8250
-740
-43
6
266.7403.4315
-1001
-72
8
292.1419.1355
-1252
-116
10
330.2457.2400
-1410
-173
12
355.6501.7450
-1605
-263
CLASS 300 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
215.9215.9200
-460
-22
3
282.4282.4224
-565
-41
4
304.8304.8250
-674
-59
6
403.4403.4355
-958
-119
8
419.1419.1400
-1146
-193
10
457.2457.2450
-1406
-291
14
762.0762.0
-500
-2071687
16
838.2838.2
-500
-2203876
18
914.4914.4
-630
-25301201
24
1143.01143.0
-710
-32202258
CLASS 600 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
292.1292.1200
-549
-35
3
355.6355.6250
-650
-64
4
431.8431.8355
-773
-110
6
558.8558.8450
-1130
-222
8
650.4650.4500
-1258
-405
10
787.4787.4630500
15761727626
12
838.2838.2
-630
-1921878
16
990.6990.6
-710
-24551490
14
889.0889.0
-630
-22191165
18
1092.21092.2
-710
-25781836
20
1193.81193.8
-800
-28552410
PK_49
øD1
L(RF), L1(BW)
H 1
HW (HAND WHEEL OPERATED)
H (O
PEN
)
øD
NO. PART NAME MATERIAL
123456789
101112131415161718192021232425262728293031323334
A216 - WCBA216 - WCBA216 - WCB+STLA479 - 410A53A576 - 1020+STLA216 - WCBGRAPHITE
A283 - DA193 - B7A194 - 2HA283 - DA576 - 1020+CrA193 - B7A194 - 2HDUCTILE IRONA193 - B7A576 - 1045+ZnA576 - 1020A194 - 2HA576 - 1045+CrA576 - 1045+CrA216 - WCBINCONEL X - 750A283 - DA576 - 1045A576 - 1020A53A576 - 1020A439 - D2CA47 - 32510+ZnSTEEL
A217 - WC6A217 - WC6A217 - WC6+STLA479 - 410A53A182 - F11+STLA217 - WC6+STLGRAPHITE
A283 - DA193 - B7A194 - 2HA283 - DA479 - 410A193 - B16A194 - 4DUCTILE IRONA193 - B7A576 - 1045+ZnA576 - 1020A194 - 2HA240 - 304A240 - 304A217 - WC6INCONEL X - 750A283 - DA576 - 1045A576 - 1020A53A576 - 1020A439 - D2CA47 - 32510+ZnSTEEL
A217 - C12AA217 - C12AA217 - C12A+STLA479 - 410A53A182 - F91+STLA217 - C12A+STLGRAPHITE
A283 - DA193 - B7A194 - 2HA283 - DA479 - 410A193 - B16A194 - 4DUCTILE IRONA193 - B7A576 - 1045+ZnA576 - 1020A194 - 2HA240 - 304A240 - 304A217 - C12AINCONEL X - 750A283 - DA576 - 1045A576 - 1020A53A576 - 1020A439 - D2CA47 - 32510+ZnSTEEL
BODYBONNET DISCSTEMHAND WHEELBODY SEAT RINGBACK SEAT RINGGASKETPACKINGGLAND FLANGEGLAND BOLTGLAND NUTYOKEPACKING GLANDBONNET BOLTBONNET NUTGEAR BOXBOLTSPRING WASHERYOKE BARYOKE NUTRETAINERADAPTER RINGDISC GUIDEDISC SPRINGSTOPPERBONNET CLAMPSTOP BARSTEM COVERYOKE CAPYOKE SLEEVEHINGE NUTNIPPLE
GRAPHITE+GRAPHITE WITH INCONEL WIRE
STANDARD MATERIAL SPECIFICATIONS
PRESSURE SEAL BONNET TYPE
PK_50
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
END CONNECTION
DIMENSION AND WEIGHTCLASS 600 UNIT : mm
SIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
292.1177.8200
-586
-29
3
355.6254.0250
-705
-52
4
431.8304.8355
-872
-121
6
558.8457.2450355
10891300189
8
660.4584.2500500
12741490339
10
787.4711.2630500
15201720497
30
-1651.0
-710
-40107033
CLASS 900 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
368.3215.9315
-658
-33
3
381.0304.8355
-773
-59
4
457.2355.6355
-896
-110
6
609.6508.0
-500
-1287227
8
736.6660.4
-500
-1495349
16
1130.31092.2
-500
-25421638
24
1549.41549.4
-710
-36464338
CLASS 1500 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
2
368.3215.9315
-658
-40
3
469.9304.8355
-832
-66
4
545.1406.4400
-963
-121
6
704.9558.8630500
11781316312
8
831.9711.2
-630
-1497458
10
990.5863.6
-710
-18431121
12
1130.3990.6
-710
-21051344
14
1257.31066.8
-800
-23071658
16
1384.31193.8
-900
-26552064
18
1536.71346.2
-710
-29262883
26
-1473.2
-800
-35157015
20
1663.71473.2
-710
-30415678
CLASS 2500 UNIT : mmSIZE
L
L1
D
D1
H
H1
WEIGHT(Kg)
3
577.9368.3355
-750
-75
6
914.4609.6630
-1010
-379
PK_51
Stainless steel valves are utilized in the chemical, petrochemical, food, paper, and pharmaceutical processing industries all over the world.
Investment casting shall be manufactured up to 1 1/2" for class 150 and 300.
Shell materials shall be in accordance with ASTM A351 Grade CF8M & CF8 and the others are optional.
Stainless steel valves are designed and manufactured in conformity with API, ANSI, BS and other standards recognized with quality meeting the stringent requirements for such industrial applications.
Stainless steel valves are specialized products through the processes of design, material selection, manufacturing, quality control, and experiences to final product.
INVESTMENT CASTING
PRODUCTION RANGE
VALVE SHELL MATERIALS
※At temperatures over 1000℉, use the material only when the carbon contents is 0.04% or higher.
A351 Gr. CF8
A351 Gr. CF8M
A351 Gr. CF3
A351 Gr. CF3M
A351 Gr. CF8C
A351 Gr. CN7M
A890 Gr 4A ( UNS J92205 )
A890 Gr 6A ( UNS J93380 )
1500℉ ( 816℃ )*
1500℉ ( 816℃ )*
800℉ ( 427℃ )
850℉ ( 454℃ )
1500℉ ( 816℃ )*
300℉ ( 149℃ )
600℉ ( 316℃ )
600℉ ( 316℃ )
ASTM DESIGNATION MAXIMUM WORKING TEMPERATURE℉(℃)
TYPECLASS 150 300
1/2-24
1/2-12
1/2-24
1/2-24
1/2-12
1/2-24
GATE
GLOBE
SWING CHECK
UNIT : NPS
STAINLESS STEEL VALVES
PK_54
Depending on service conditions, various materials are available optionally for flange gasket and stem packing.
PK adopts an H-shaped flexible wedge of which the size is 3" and larger for Class 150 and 2" and higher for Class 300/600. The H-shaped flexible wedges are featured with mechanical flexibility to be able to adjust to the shape of body seat for secure mutual contacts.It has a particular importance when large gate valve is applied to extremely high pressure and temperature that temporary deformation may occur in valve all the time.If the H-shape wedge is provided, operating torque would get smaller, seat wear less, and valve closing tighter.
A. Gasket materials
1. Glass fiber sheet2. Spiral wound material (Graphite or PTFE)3. PTFE4. Metal ring5. Graphite
B. Packing materials
1. PTFE2. Graphite3. Glass fiber sheet
OPTIONAL BONNET FLANGE GASKET MATERIAL
DESIGN FEATURES OF PK STAINLESS STEEL GATE VALVE WEDGES
2 1/2 & SMALLER 3 & LARGER
CLASS
ONE PIECE SOLID WEDGE FLEXIBLE ONE PIECE WEDGE
UNIT : NPS
150
300
600
1 & SMALLER
-
1 1/2 & LARGER
2 & LARGER
PK_55
Globe valve adopts plug type disc. The bottom guide type plug disc shall be applied following the range shown below.
It is manufactured by two different ways depending on the valve size.
DESIGN FEATURES OF GLOBE VALVE DISC
DESIGN FEATURES OF GATE VALVE YOKE SLEEVE
8 AND LARGER300
CLASS SIZE
UNIT : NPS
150 10 AND LARGER
Yoke caps type B is made of CS 1020+Zn plating.
5 AND SMALLER
TYPE A TYPE B
UNIT : NPS
6 AND LARGER
PLUG DISC
BOTTOM GUIDETYPEPLUG DISC
TYPE A TYPE B
PK_56
On 10" and smaller valves, the yoke is integrated with bonnet.On 12" and larger valves, the yoke is separated from bonnet.
Hand wheels are made in accordance with ASTM A 197 for external dimension 560mm and ASTM A216 WCB for over 560mm. A hammer blow type hand wheel of ASTM A216 WCB is provided for Class 150 (size 8) valves and Class 300 and over valves (size 6")
DESIGN FEATURES OF GATE VALVE YOKE
DESIGN FEATURES OF VALVE HAND WHEELS
SIZE
Type A
BOLT
300
Type B FULL THREAD.BOLT & NUT300
6 AND LARGER
UNIT : NPS
3 AND LARGER
2 1/2 AND SMALLER
5 AND SMALLERHEX. HEAD
CLASS
150
150
INTEGRAL YOKE SEPARATE YOKE
TYPE AHEX. HEADED BOLT
TYPE BSTUD BOLT
It is manufactured by two different ways depending on valve class and size.
DESIGN FEATURES OF VALVE BONNET BOLTS
PK_57
DIMENSION AND WEIGHT
SIZE
L
L1
D
H
WEIGHT(kg)
CLASS 150 UNIT : mm1/2
108.0108.0120208
6
3/4
117.3117.3120208
6
1
127.0127.0120226
6
1 1/2
165.1165.1140285
9
2
177.8215.916033312
2 1/2
190.5214.316038418
3
203.2282.420042423
4
228.6304.825053135
6
266.7403.431573062
8
292.1419.1355938102
10
330.2457.2355
1114147
12
355.6501.7400
1317213
SIZE
L
L1
D
H
WEIGHT(kg)
CLASS 300 UNIT : mm1/2
139.7139.7120208
8
3/4
152.4152.4120211
8
1
165.1165.1120279
8
1 1/2
190.5190.520030616
2
215.9215.920034618
2 1/2
241.3241.320038829
3
282.4282.422444739
4
304.8304.825054254
6
403.4403.4355758112
8
419.1419.1400949202
10
457.2457.2450
1152253
12
501.7501.7500
1417390
L(RF), L1(BW)
H (O
PEN
)
øD
NO. PART NAME MATERIAL
GRAPHITE+GRAPHITE WITH INCONEL WIRESPIRAL WOUND / GRAPHITE+316+316
123456789
101112131415161718192021
A351 - CF8A351 - CF8A351 - CF8A479 - 304A197A351 - CF8A351 - CF8
A351 - CF8A193 - B8A194 - 8A479 - 304A479 - 304A193 - B8A194 - 8A576 - 1020+ZnA439 - D2C304 S.SSTEEL+ CrSTEEL+ Cr
A351 - CF8MA351 - CF8MA351 - CF8MA479 - 316A197A351 - CF8MA351 - CF8M
A351 - CF8A193 - B8A194 - 8A479 - 304A479 - 316A193 - B8A194 - 8A576 - 1020+ZnA439 - D2C304 S.SSTEEL+ CrSTEEL+ Cr
BODYBONNET WEDGESTEMHAND WHEELBODY SEATBACK SEATGASKETPACKINGGLAND FLANGEHINGE BOLTHINGE NUTHINGE PINPACKING GLANDBONNET BOLTBONNET NUTYOKE CAPYOKE SLEEVEHANDLE NUTSET SCREWNIPPLE
STANDARD MATERIAL SPECIFICATIONS
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- CONSULT US FOR LARGER SIZE
END CONNECTION
GATE VALVES
PK_58
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- CONSULT US FOR LARGER SIZE
END CONNECTION
GLOBE VALVES
L(RF), L1(BW)
H (O
PEN
)øD
NO. PART NAME MATERIAL
GRAPHITE+GRAPHITE WITH INCONEL WIRESPIRAL WOUND / GRAPHITE+316+316
123456789
1011121314151617181920
A351 - CF8A351 - CF8A351 - CF8A479 - 304A197A351 - CF8A351 - CF8
A351 - CF8A193 - B8A194 - 8A479 - 304A479 - 304A193 - B8A194 - 8A439 - D2CA479 - 304A194 - 8304 S.S
A351 - CF8MA351 - CF8MA351 - CF8MA479 - 316A197A351 - CF8MA351 - CF8M
A351 - CF8A193 - B8A194 - 8A479 - 304A479 - 316A193 - B8A194 - 8A439 - D2CA479 - 316A194 - 8304 S.S
BODYBONNET DISCSTEMHAND WHEELBODY SEATBACK SEATGASKETPACKINGGLAND FLANGEHINGE BOLTHINGE NUTHINGE PINPACKING GLANDBONNET BOLTBONNET NUTYOKE BUSHLOCK NUTHANDLE NUTWASHER
STANDARD MATERIAL SPECIFICATIONS
DIMENSION AND WEIGHT
SIZE
L
L1
D
H
WEIGHT(kg)
CLASS 150 UNIT : mm1/2
108.0108.0100174
4
3/4
117.3117.3100174
4
1
127.0127.0140224
4
1 1/2
165.1165.116025910
2
203.2203.216026613
2 1/2
215.9215.920028121
3
241.3241.322434227
4
292.1292.128037742
6
406.4406.435542976
8
495.3495.3355558149
10
622.3622.3400740241
12
698.5698.5400803395
SIZE
L
L1
D
H
WEIGHT(kg)
CLASS 300 UNIT : mm1/2
152.4152.4100185
9
3/4
177.8177.8100194
9
1
203.2203.2140224
9
1 1/2
228.6228.616026715
2
266.7266.716032917
2 1/2
292.1292.120035433
3
317.5317.522438334
4
355.6355.628044346
6
444.5444.5355567125
8
558.8558.8400625218
10
622.3622.3450881367
12
711.2711.2500989521
PK_59
DIMENSION AND WEIGHT
SIZE
L
L1
H
WEIGHT(kg)
CLASS 150 UNIT : mm1/2
108.0108.0
855
3/4
117.3117.3
895
1
127.0127.0102
5
1 1/2
165.1165.112011
2
203.2203.213813
2 1/2
215.9215.915518
3
241.3241.316022
4
292.1292.120136
6
355.6355.624862
8
495.3495.3293119
10
622.3622.3330155
12
698.5698.5354235
SIZE
L
L1
H
WEIGHT(kg)
1/2
152.4152.4
9310
3/4
177.8177.8
9610
1
215.9215.911210
1 1/2
241.3241.312614
2
266.7266.715219
2 1/2
292.1292.116425
3
317.5317.517633
4
355.6355.618653
5
444.5444.5262109
8
533.4533.4312199
10
622.3622.3355231
12
711.2711.2393308
CLASS 300 UNIT : mm
L(RF), L1(BW)
H
NO. PART NAME MATERIAL
123456789
1011121314
A351 - CF8A351 - CF8A351 - CF8A351 - CF8A479 - 304A351 - CF8A479 - 304
304 S.SA193 - B8A194 - 8A194 - 8304 S.SA240 - 304
A351 - CF8MA351 - CF8MA351 - CF8MA351 - CF8MA479 - 304A351 - CF8MA479 - 304
304 S.SA193 - B8A194 - 8A194 - 8M304 S.SA240 - 304
BODYBONNET DISCARMROD PINBODY SEAT RINGPLUG BOLTGASKETPLUG GASKETBONNET BOLTBONNET NUTDISC NUTPINWASHER
SPIRAL WOUND / GRAPHITE+316+316
STANDARD MATERIAL SPECIFICATIONS
SWING CHECK VALVES
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- CONSULT US FOR LARGER SIZE
END CONNECTION
PK_60
Cryogenic valves are specially engineered and designed for piping
systems used in the storage and transport of liquefied gasses
such as LNG and liquid nitrogen and oxygen. The main structural
feature of these valves is an extended bonnet with an enclosed
vapor chamber to isolate packing from the cryogenic fluid and
thereby allow packing to function properly. PK Vlave Cryogenic
designs and liquid nitrogen testing facilities go much further to
assure proven performance in this most demanding application.
Materials suitable for working condition must be adopted for low temperature valves.Especially in petrochemical industry, the types of fluids to be processed are different according to each section even in the same plants. At the same time, the temperatures used are also different. A full consideration must be paid to the selection of
material.
CRYOGENIC SERVICE VALVES
MATERIAL
BODY MATERIAL BOLT NUTSERVICE TEMPERATURE
-50
-75
-100
-150
-425
-425
-425
-425
CARBON STEEL( GRADE LCB)
C-1/2Mo( GRADE LC1)
2 1/2NI( GRADE LC2)
3 1/2NI( GRADE LC3)
TYPE 304( GRADE CF8)
TYPE 304( GRADE CF3)
TYPE 316( GRADE CF8M)
TYPE 316L( GRADE CF3M)
A320 GR. L7
A320 GR. L7
A320 GR. L7
A320 GR. L7
A320 GR. B8
A320 GR. B8
A320 GR. B8
A320 GR. B8
A194 GR. 4
A194 GR. 4
A194 GR. 4
A194 GR. 4
A194 CR. 8
A194 CR. 8
A194 CR. 8
A194 CR. 8
-46
-59
-73
-101
-254
-254
-254
-254
℉ ℃
As for the materials constituting the low temperature valves, special consideration must be paid to the materials used at pressure parts as in the case of body and bonnet.
BODY AND BONNET
CRYOGENIC VALVES
PK_62
Following the body and bonnet, selection of materials for main parts such as stem, seat ring, and gland is very important. We adopt austenite stainless steel.
Teflon or other plastic packing protecting from shinkage by large cloumn of insulating gas.
Stellite 6 for all medium and high pressure application prevents seizing and galling.
Material for bolts at low temperatures requires especially strength. Therefore, rigidity at low temperature is demanded and brittleness at low temperature of steel material can be improved generally by heat treatment.We use it according to ASTM standard.
ASTM : A351-CF8, CF8M, CF3, CF3M or Equivalent
TRIM
PACKING
SEATING SURFACE
BOLT AND NUT
TABLE OF LIQUEFIED GASSES PRODUCTION MATERIALS
TYPE
NATURAL GAS, LNG
METHANE, CH4
OXYGEN, O2
ARGON, AR
CARBON DIOXIDE, CO2
NITROGEN, N2
HYDROGEN, H2
HELIUM, HE
BOILING POINT
-270
-258
-296
-303
-314
-320
-423
-452
-168
-162
-183
-186
-192
-196
-253
-269
℉ ℃
CLASS
TYPE
GATE
150 300 600 900 1500
2-48
2-24
2-36
2-60
2-24
2-48
3-48
2-36
2-14
2-36
2-24
2-14
2-24
2-16
2-10
2-16
UNIT : NPS
GLOBE
SWING CHECK
BUTTERFLY
PK_63
NO. PART NAME MATERIAL
GRAPHITE+GRAPHITE WITH INCONEL WIRESPIRAL WOUND / GRAPHITE+316+316
123456789
10111213141516171819202122232425
A351 - CF8A351 - CF8A351 - CF8+STLA479 - 304A197A240 - 304+ STLA479 - 304
A351 - CF8A193 - B8A194 - 8A479 - 304A479 - 304A320 - B8 CL.2A194 - 8304 S.SAL-BRONZEA47 - 32510+ZnSTEEL+ CrSTEEL+ CrA351 - CF8A479 - 304DUCTILE IRONA53
A351 - CF8MA351 - CF8MA351 - CF8M+STLA479 - 316A197A240 - 316+STLA479 - 316
A351 - CF8A193 - B8A194 - 8A479 - 304A479 - 316A320 - B8 CL.2A194 - 8304 S.SAL-BRONZEA47 - 32510+ZnSTEEL+ CrSTEEL+ CrA351 - CF8A479 - 316DUCTILE IRONA53
BODYBONNET WEDGESTEMHAND WHEELBODY SEAT RINGBACK SEAT RINGGASKETPACKINGGLAND FLANGEHINGE BOLTHINGE NUTHINGE PINPACKING GLANDBONNET BOLTBONNET NUTYOKE CAPYOKE SLEEVEHANDLE NUTSET SCREWNIPPLEYOKESTUFFING RINGGEAR BOXSTEM COVER
STANDARD MATERIAL SPECIFICATIONS
GOV (GEAR OPERATED)
H 1
øD1
L(RF), L1(BW)
H (O
PEN
)
øD
GATE VALVES
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
PK_64
DIMENSION AND WEIGHTCLASS 150 UNIT : mm
SIZE
L
L1
D
D1
H
H1
2
177.8215.9200
-653
-
3
203.2282.5224
-763
-
4
228.6304.8250
-844
-
6
266.7403.4355250
10451175
8
292.1419.1355250
12221323
10
330.2457.2355355
14581587
12
355.6501.7
-355
-1835
14
381.0571.5
-355
-2080
16
406.4609.6
-500
-2314
18
431.8660.4
-500
-2350
24
1143.01143.0
-710
-2986
28
1346.21346.2
-800
-3552
30
1397.01397.0
-800
-3716
CLASS 300 UNIT : mmSIZE
L
L1
D
D1
H
H1
2
215.9215.9200
-676
-
3
282.4282.4224
-766
-
4
304.8304.8250
-851
-
5
403.4403.4355250
10211154
8
419.1419.1400355
12781457
10
457.2457.2450355
14791602
12
501.7501.7
-355
-1853
14
762.0762.0
-500
-1980
16
838.2838.2
-500
-2316
18
914.4914.4
-630
-2393
20
990.6990.6
-630
-2663
24
1143.01143.0
-710
-2986
28
1346.21346.2
-800
-3552
CLASS 600 UNIT : mmSIZE
L
L1
D
D1
H
H1
2
292.1292.1200
-674
-
3
355.6355.6250
-785
-
4
431.8431.8355
-879
-
6
558.8558.8450355
10841213
8
660.4660.4500500
13261506
10
787.4787.4
-500
-1628
12
838.2838.2
-630
-1883
14
889.0889.0
-630
-2014
16
990.6990.6
-710
-2214
18
1092.21092.2
-710
-2445
20
1193.81193.8
-800
-2680
26
1447.81447.8
-900
-3320
CLASS 900 UNIT : mmSIZE
L
L1
D
D1
H
H1
2
368.3368.3250
-595
-
3
381.0381.0355250802
-
4
457.2457.2355250928
1033
6
609.6609.6500500
12311327
8
736.6736.6630500
13931558
10
838.2838.2710630
16911813
12
965.2965.2
-710
-1924
14
1028.71028.7
-710
-2020
16
1130.31130.3
-710
-2251
18
1219.21219.2
-900
-2509
20
1320.81320.8
-900
-2655
24
1549.41549.4
-900
-3178
CLASS 1500 UNIT : mmSIZE
L
L1
D
D1
H
H1
3
469.9469.9
-250
-950
6
704.9704.9
-400
-1480
PK_65
NO. PART NAME MATERIAL
123456789
101112131415161718192021222324
A351 - CF8A351 - CF8A351 - CF8+STLA479 - 304A197A351 - CF8+ STLA479 - 304
A351 - CF8A193 - B8A194 - 8A479 - 304A479 - 304A320 - B8 CL.2A194 - 8AL-BRONZEA479 - 304A194 - 8A240 - 304A351 - CF8A479 - 304DUCTILE IRONA53
A351 - CF8MA351 - CF8MA351 - CF8M+STLA479 - 316A197A351 - CF8M+STLA479 - 316
A351 - CF8A193 - B8A194 - 8A479 - 304A479 - 316A320 - B8 CL.2A194 - 8AL-BRONZEA479 - 316A194 - 8A240 - 304A351 - CF8A479 - 316DUCTILE IRONA53
BODYBONNET DISCSTEMHAND WHEELBODY SEAT RINGBACK SEAT RINGGASKETPACKINGGLAND FLANGEHINGE BOLTHINGE NUTHINGE PINPACKING GLANDBONNET BOLTBONNET NUTYOKE BUSHLOCK NUTHANDLE NUTWASHERYOKESTUFFING RINGGEAR BOXSTEM COVER
GRAPHITE+GRAPHITE WITH INCONEL WIRESPIRAL WOUND / GRAPHITE+316+316
STANDARD MATERIAL SPECIFICATIONS
GOV (GEAR OPERATED)
H 1
øD1
H (O
PEN
)
d
øD
L(RF), L1(BW)
GLOBE VALVES
PK_66
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
DIMENSION AND WEIGHT
SIZE
L
L1
D
D1
H
H1
CLASS 150 UNIT : mm2
203.2203.2200
-573
-
3
241.3241.3250
-655
-
4
292.1292.1315
-693
-
6
406.4406.4355350816
1094
8
495.3495.3355450990
1056
10
622.3622.3400450
-1148
18
978.0978.0
-630
-1891
14
787.4787.4
-560
-1358
12
698.5698.5400500
-1266
SIZE
L
L1
D
D1
H
H1
CLASS 300 UNIT : mm2
266.7266.7200
-621
-
3
317.5317.5250
-713
-
4
355.6355.6315
-773
-
6
444.5444.5355450894
1159
8
558.8558.8400500
10471156
10
622.3622.3450560
11921400
12
711.2711.2
-630
-1638
14
838.2838.2
-630
-1627
SIZE
L
L1
D
D1
H
H1
CLASS 600 UNIT : mm2
292.1292.1224
-607
-
3
355.6355.6315
-692
-
4
431.8431.8315
-776
-
6
558.8558.8450500
-1176
8
660.4660.4
-560
-1426
SIZE
L
L1
D
D1
H
H1
CLASS 900 UNIT : mm2
368.3368.3315
-688
-
3
381.0381.0315
-737
-
4
457.2457.2355
-882
-
6
609.6609.6450560
-1488
8
736.6736.6710630
-1789
SIZE
L
L1
D
D1
H
H1
CLASS 1500 UNIT : mm2
368.3368.3315
-688
-
3
469.9469.9355
-798
-
PK_67
NO. PART NAME MATERIAL
123456789
1011121314
A351 - CF8A351 - CF8A351 - CF8M+STLA351 - CF8A479 - 304A240+304+STLA479 - 304
304 S.SA320 - B8 CL.2A194 - 8A194 - 8304 S.S340 S.S
A351 - CF8MA351 - CF8MA351 - CF8M+STLA351 - CF8MA479 - 316A240+316+STLA479 - 316
316 S.SA320 - B8 CL.2A194 - 8A194 - 8M316 S.S315 S.S
BODYBONNET DISCARMROD PINBODY SEAT RINGPLUG BOLTGASKETPLUG GASKETBONNET BOLTBONNET NUTDISC NUTPINWASHER
SPIRAL WOUND / GRAPHITE+316+316
STANDARD MATERIAL SPECIFICATIONS
SWING CHECK VALVES
L(RF), L1(BW)
H
d
PK_68
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
DIMENSION AND WEIGHT
SIZE
L
L1
H
WEIGHT(kg)
CLASS 150 UNIT : mm2
203.2203.216016
3
241.3241.319026
4
292.1292.122545
6
355.6355.626078
8
495.3495.3320136
10
622.3622.3350214
12
698.5698.5380319
14
787.4787.4405412
16
863.6863.6460514
18
977.9977.9505749
20
977.9977.9570933
24
1295.41295.4
6801346
26
1295.4-
8651727
28
1447.8-
9181964
30
1524-
9622247
SIZE
L
L1
H
WEIGHT(kg)
CLASS 300 UNIT : mm2
266.7266.716021
3
317.5317.519942
4
355.6355.622764
6
444.5444.5278124
8
533.4533.4322222
10
622.3622.3383291
12
711.2711.2435444
14
838.2838.2510632
16
863.6863.6521786
18
977.9977.9572
1058
20
1016.01016.0
6221210
24
1346.21346.2
7121916
26
1346.2-
9792000
28
1498.6-
9832600
30
1593.9-
11153664
SIZE
L
L1
H
WEIGHT(kg)
CLASS 600 UNIT : mm2
292.1292.119731
3
355.6355.621056
4
431.8431.8256103
6
558.8558.8329204
8
660.4660.4364342
10
787.4787.4464624
12
838.2838.2486776
14
889.0889.0572938
16
990.6990.6660
1250
18
1092.21092.2
7111518
20
1193.81193.8
7872390
24
1397.01397.0
8643686
26
-144810284000
30
1651-
11355502
SIZE
L
L1
H
WEIGHT(kg)
CLASS 900 UNIT : mm2
368.3368.326768
3
381.0381.0290106
4
457.2457.2306139
6
609.6609.6338294
8
736.6736.6460525
10
838.2838.2500731
12
965.2965.2578
1025
14
1028.71028.7
6471444
16
1130.31130.3
7101850
18
1219.21219.2
7852610
20
1320.81320.8
8503407
24
1549.41549.410065842
SIZE
L
L1
H
WEIGHT(kg)
CLASS 1500 UNIT : mm2
368.3368.326773
3
469.9439.9296125
4
546.1546.1355212
6
704.9704.9465470
8
831.9831.9540825
10
990.6990.6657960
12
1130.31130.3
7281510
16
1384.31384.311164630
PK_69
MATERIAL ACCORDING TO ASTM
NO. PART NAME MATERIAL
123456789
10111213141516171819202122232425262728293031323334353637383940
A351 - CF3A351 - CF8M+STLA479 - 316A351 - CF3GRAPHITE + CARBON FIBERA479 - 304A351 - CF8A193 - B8A194 - 8BI-MESHA320 - B8304L SS+Cu ALLOYA320 - B8/A194 - 8A240 - 304A193 - B8A194 - 8A193 - B7+CrA240 - 304A576 - 1045DUCTILEA240 - 316316SS+GRAPHITEB150 - C63000A240 - 316A320 - B8A194 - 8A240-316A53 or STEELA320-B8M CLASS2A194-8MAA351 - CF3A320-B8M CLASS 2A194-8MA316SS+GRAPHITEA320-B8M CLASS 2A194-BMA316SS+GRAPHITE316 SS316 SSSTEEL+ BRASS
BODYDISCSTEMCOVERPACKINGPACKING GLANDGLAND FLANGEGLAND BOLTGLAND NUTBUSH BEARINGKEYSEAL RINGSTOP BOLT/NUTYOKEYOKE BOLTYOKE NUTMOUNTING BOLTSPRING WASHERKEYGEAR BOXCAPGASKET(CAP)THRUST WASHERSEAT RETAINERRETAINER BOLTRETAINER NUTARRANGEMENT RINGHANDWHEELCAP BOLTCAP NUTBONNETBONNET BOLTBONNET NUTBONNET GASKETCOVER BOLTCOVER NUTCOVER GASKETADAPTERADATER RETAINERLOCKING DEVICE
SIZE
d
L
SCH
H
D2
Weight(Kg)
6
153403.410S69230070
8
204419.110S81030090
10
254457.210S845400126
12
305501.710S910400175
14
337571.510S940500270
STANDARD MATERIAL SPECIFICATIONS
DIMENSION AND WEIGHT
PK_71
1234569
101112131415161718192021222324252627282930313233343536373839404142
A351 - CF3A351 - CF8M+STLA479 - 316A479 - 316BI-MESHB584 - C86300A320 - B8A240 - 316316SS+GRAPHITEA320-B8M CLASS 2A194 - 8MAA351 - CF3316SS+GRAPHITEA320-B8M CLASS 2A194 - 8MAGRAPHITE + CARBON FIBERA479 - 304A351 - CF8A193 - B8A194 - 8A240 - 304A193 - B8A194 - 8A576 - 1045DUCTILEA193 - B7+CrA240 - 304A53 or STEEL304L SS+Cu ALLOYA240 - 316A240 - 316A320 - B8A194 - 8 316 SS316 SSA351 - CF3316SS+GRAPHITEA320-B8M CLASS 2A194 - 8MASTEEL+ BRASS
BODYDISCSTEMLOW STEMBUSH BEARINGTHRUST WASHERSTOP BOLTCAPCAP GASKETCAP BOLTCAP NUTBONNETBONNET GASKETBONNET BOLTBONNET NUTPACKINGPACKING GLANDGLAND FLANGEGLAND BOLTGLAND NUTYOKEYOKE BOLTYOKE NUTKEYGEAR BOXMOUNTING BOLTSPRING WASHERHANDWHEELSEAL RINGARRANGEMENT RINGSEAT RETAINERRETAINER BOLTRETAINER NUTADAPTERADAPTER RETAINERCOVERCOVER GASKETCOVER BOLTCOVER NUTLOCKING DEVICE
MATERIAL ACCORDING TO ASTM
NO. PART NAME MATERIAL
STANDARD MATERIAL SPECIFICATIONS
DIMENSION AND WEIGHTSIZE
d
L
SCH
H
D2
Weight(Kg)
16
388609.610S970500330
20
490711.210S
1110560600
24
591812.810S
1260630
1050
30
737914.4
101375700
1750
32
788965.2
101415700
2050
36
8931016.0
101465700
2800
PK_73
In a maintenance aspect, it is true that this type of valve is accounted less than any other type, but the valve
have some important advantages as follows:
1.Useful life is ensured.
2.There is a grease nipple on all bellows seal gate valves under current production to ensure correct
lubrication over yoke bush.
The threads on stem in every kind of bellows seal valves should be kept clean if possible and lubricated
periodically with high temperature grease.
It is recommended the preventive maintenance should be carried out at least every three months.
The maintenance has a particular importance when the valve is employed to high temperature application in
case it is essential to use a grease of high temperature type.
At this time, it is desirable that the valve is operated from open to shut, and vice versa.
As a general guide to valve selection suitable for a specific
application, the gate valve should be used mainly for low
or medium pressure steam, steam tracing lines, or other
services such as heat transfer.
The globe valve should be selected for medium or high
pressure steam, where the isolation of vessels may be
involved in safety problem. It is also used for toxic or
explosive media handling and in every case that a trouble
may occur in flow regulation.
It should be noted that we have a specially designed
valve of which dry escape to gas or fluid is completely
prevented. In the valve, conventional stem packing
is replaced with flexible metallic membrane where all
possible leaking paths through stem or body/bonnet joint
are welded.
The bellows units applied to this valve were tested for
life cycle to destruction, resulting in satisfactory test
results meeting the life time, temperature, and pressure
requirements of ASME B16.34.
OPERATIONAL SERVICE FEATURES
VALVE SELECTION
BELLOWS SEAL VALVES
PK_76
Low Fugitive emission Valve (LFV) is designed and manufactured to ensure leakage of less than 100 ppm of volatile organic compounds. PK Valve has established the test facilities and made its own procedures with Emission Defence Packing (EDP) for fugitive emission test. By using the test facilities and procedures, room temperature cycle and thermal cycle testing have been performed, establishing critical design parameters necessary to achieve low fugitive emissions.
• Bellows Set : 321SS(Bellows) + 316SS(Holder)• Carbon Steel : ASTM A216-WCB or Equivalent• Stainless Steel : ASTM A351-CF8, CF8M, CF3, CF3M or Equivalent• ASME SA designation material(e.g. ASME SA351-CF8M)
PRODUCTION MATERIALS
LOW FUGITIVE EMISSION VALVE
CLASSTYPE
GATE
GLOBE
150 300 600
2-24
UNIT : NPS
1/2-24
2-24
1/2-24
2-12
2-12
Detail ‘A’
‘A’
‘B’
Detail ‘B’
SEALWELDING
SEALWELDING
PK_77
NO. PART NAME MATERIAL
123456789
101112131415161718192021222324
A216 - WCBA216 - WCBA217 - CA15+STLA479 - 410A197A576 - 1020+STL(S20C)STAINLESS STEEL TYPE321+316SPIRAL WOUND / GRAPHITE+304+304GRAPHITE+GRAPHITE WITH INCONEL WIREA283 - DA307 - BA194 - 2HA576 - 1020 A576 - 1020+CrA193 - B7A194 - 2HA576 - 1020A439 - D2CA47 - 32510+ZnSTEELSTEEL+CrA216 - WCBA106 - B
BODYYOKEWEDGESTEMHAND WHEELBODY SEAT RINGBELLOWSGASKETPACKINGGLAND FLANGEHINGE BOLTHINGE NUTHINGE PINPACKING GLANDBONNET BOLTBONNET NUTYOKE CAPYOKE SLEEVEHANDLE NUTSET SCREWNIPPLEFLANGEEXTENSION PIPE
STANDARD MATERIAL SPECIFICATIONS
L(RF)
H (O
PEN
)
øD
DIMENSION AND WEIGHT
SIZE
L
D
H
CLASS 150 UNIT : mm2
177.8200639
3
203.2224890
4
228.6355
1272
5
254.0315
1141
6
266.7355
1209
8
292.1400
1588
SIZE
L
D
H
CLASS 300 UNIT : mm2
215.9200639
3
282.4224890
4
304.8355
1272
5
381.0315
1141
6
403.4355
1209
8
419.1400
1588
SIZE
L
D
H
CLASS 600 UNIT : mm3
355.6250974
4
431.8355
1272
• BELLOWS INSPECTION AND TEST : MSS-SP-117• END FLANGE : ASME B16.10• BUTT WELDING ENDS : ASME B16.25• SHELL WALL THICKNESS : ASME B16.34 OR API 600• FACE TO FACE : ASME B 16.10
APPLICABLE STANDARD SPECIFICATION :
GATE VALVES
PK_78
L(RF)
H (O
PEN
)
øD
• BELLOWS INSPECTION AND TEST : MSS-SP-117• END FLANGE : ASME B16.10• BUTT WELDING ENDS : ASME B16.25• SHELL WALL THICKNESS : ASME B16.34 OR API 600• FACE TO FACE : ASME B 16.10
APPLICABLE STANDARD SPECIFICATION :
DIMENSION AND WEIGHT
SIZE
L
D
H
CLASS 150 UNIT : mm2
203.2200413
3
241.3224432
4
292.1355579
5
355.6400670
6
406.4450773
8
495.3560945
10
622.3560
1208
2 ½
215.9200378
SIZE
L
D
H
CLASS 300 UNIT : mm2
266.7200364
3
317.5224432
4
355.6355569
5
400.1400670
6
444.5450773
8
558.8560945
10
622.3560
1213
2 ½
292.1200378
SIZE
L
D
H
CLASS 600 UNIT : mm3
355.6355583
2 ½
330.2355576
NO. PART NAME MATERIAL
123456789
10111213141516171819202122
BODYBONNET DISCSTEMHAND WHEELBODY SEATBELLOWS SETGASKETPACKINGGLAND FLANGEHINGE BOLTHINGE NUTPACKING GLANDBONNET BOLTBONNET NUTYOKEYOKE SLEEVEYOKE CAPSTOPPERBOLTNUTHAND WHEEL NUT
A216 - WCBA216 - WCBA216 - WCB+STLA479 - 410A216 - WCBA216 - WCB+STLSTAINLESS STEEL TYPE321+316SPIRAL WOUND / GRAPHITE+304+304GRAPHITE+GRAPHITE WITH INCONEL WIREA105A307 - BA194 - 2HA576 - 1020+CrA193 - B7A194 - 2HA283 - DA439 - D2CA576 - 1020A216 - WCBA307 - BA563 - AA47 - 32510+Zn
STANDARD MATERIAL SPECIFICATIONS
GLOBE VALVES
PK_79
Triple offset metal seat butterfly valves provide a bi-directional and bubble-tight shutoff which is attributed to the geometry of triple offset seat.
The valve stem is offset by seat (1st offset) and the valve seat surface center line is offset against the center line of pipe (2nd offset) and the conical axis is offset by valve center line (3rd offset: inclined cone). The 3rd offset completely eliminates rubbing.
The seat surfaces of body and seal ring in triple offset valve contact with the inclined “cone-in-cone” and this design requires excellent sealing and seat part durability by slight wedging effect.In addition, the angle of contact between body and seal ring has a good sealing performance by low torque because the angle travels the initial torque from actuator to seat parts without any loss by jamming.
This valve is characteristic of concentric, offset and double offset construction with remarkable sealing performance and seat part durability, and moreover it is hardly needed to repair.
• Excellent durability of seat part and low operating torque by non-rubbing characteristics with triple offset construction.• Bi-directional zero leakage service by resilient metal sealing and torque seating.• Unrestricted selection of face to face dimensions for API, ASME(ANSI), BS, ISO, etc. and perfect interchangeability of gate, ball, plug, high performance butterfly, and other valves.• Low emission by quarter turn construction and good performance at automation by virtue of low operating torque and low cost.
TRIPLE OFFSET DESIGN PRINCIPLES
CHARACTERISTICS AND MERITS
TRIPLE OFFSET TYPE
PK_82
• Designed in accordance with ASME B 16.34 or other customer requirements.• Fire safe design
STANDARD
• ASME B16.5 : Class 150, 300,600 JIS B2210 : 10K. 16K, 20K, 30K, 40K DIN, ISO PN10, PN16, PN20, PN25, PN40
• ASME B16.47 series A : Class 150, 300 MSS-SP-44 : Class 150, 300, 600 BS 3293 : Class 150, 300
• MAUNAL WORM GEAR • ELECTRIC, PNEUMATIC & HYDRAULIC ACTUATOR LOCK LEVER
• API 598 • MSS-SP-61, ANSI B16.104
TESTING
• ISO 5211MOUNTING FLANGE
OPTION
• API 609 Table 2./ MSS-SP-68 Table 1 Class 150 & 300 : 3"~ 24" Class 600 : 3"~ 12"
• ISO 5752 Table 4, BS 5155 Table 6 (short) Class 150 & 300 : 3"~ 24" ISO 5752 Table 4, BS 5155 Table 6 (long) Class 600 : 3"~12"
• ISO 5752 Table 5 Class 150 & 300 : 28"~ 48" Class 600 : 14"~ 24"
• ISO 5752 Table 4, BS 5155 Table 6 (short) Class 150 & 300 : 28"~ 80" ISO 5752 Table 4, BS 5155 Table 6 (long) Class 150 & 300 : 3"~ 80" Class 600 : 14"~24"
• ASME B16.10 Class 150 & 300 : 3"~ 24" Class 600 : 3"~24"
• ISO 5752 Table 4, BS 5155 Table 6(long) Class 150 & 300 : 3"~ 80" Class 600 : 3"~24"
WAFER AND LUG TYPE
DOUBLE FLANGE
BUTT WELDING
FACE TO FACE DIMENSIONS
DESIGN FEATURE
PK_83
OPERATING
END FLANGE
• The valve body shall be one piece cast or fabrication.• The body can be supplied with different types of materials in wafer, lug, or flanged and butt
welding end connections to satisfy all installation requirements.
• The valve seat shall be integrated with the body.• Stellite or stainless steel shall be applied on the seating surface of valve body.• The valve seat is designed for inclined cone to ensure non-rubbing, non-jamming, bi-directional shutoff, and zero leakage.
• The valve disc shall be the same material as the valve body. It is supported by laminated seal ring, which is kept in place by seat retainer ring bolted to the disc and can be replaced easily.• The spiral wound gasket shall be provided between laminated seal ring and disc.
• The seal ring shall be resilient stainless steel lamella alternated by graphite, aramid fiber & cermic fiber layers.• The surface contacting between seal ring and body seat is an inclined cone type and the inclined angle generates a slight wedging effect.• With a seat retainer ring bolted to the disc, the seal ring is fixed to disc not too tightly to be replaced easily.
• The stem shall be stainless steel and one piece & two piece construction.• The stem shall be fixed to the disc by pin or in combination of pin and key. It can be protected by internal thrust bush and bush bearing.• The thrust bush and bush bearing shall be provided to locate the valve disc in a proper position.• The retainer ring shall be installed to avoid blowing out the stem.
• The packing shall be consist of two braided rings in the top and bottom of valve and three die formed graphite rings in the middle.• The lantern ring may be provided as required by customer.
• All valves shall be self-locking manual gear operation type which is served as standard.• Electric, pneumatic or hydraulic actuator may be provided as required by customer.
BODY
BODY SEAT
DISC
SEAL RING (LAMINATED)
STEM
PACKING
ACTUATORS
PK_84
THRUST BUSH
SEAT RING
316SS+Graphite Laminated
SPIRAL WOUND GASKET
316SS+Graphite316SS+Nitr
SEAT RING (Solid metal)
RETAINER RING
SEAT RETAINER
SEAT RING
SPIRAL WOUND GASKET
SEAT RETAINER BOLTDISCBODY SEAT
BODY
BUSH BEARING
PACKING (BRAIDED)
PACKING (FLEXIBLE GRAPHITE)
STEM
ACTUATOR
PK_85
• NOTE1. Nitr : Hardened by Nitriding, HCr : Hard Cr. Plating, ENP. : Electroless Nickel Plating2. CLASS 150 & 300 : 316 SS Faced & Integral CLASS 600 & OVER : STELLITE NO.6 Faced3. RECOMMEND SPARE PARTS : PART NO.6, 13, 23, 28
STANDARD MATERIAL LIST
MATERIAL ACCORDING TO ASTM
S
T
A
N
D
A
R
D
O
P
T
I
O
N
NO. PART NAME MATERIAL
123456789
1011121314151617181920212223242526272829303132332
13
34
35
40
BODYSEAT SURFACEDISCSTEMRETAINER RINGPACKINGPACKING GLANDGLAND FLANGGLAND BOLTGLAND NUTBUSH BEARINGKEYSEAL RINGTAPER PINYOKEYOKE BOLTYOKE NUTMOUNTING BOLTSPRING WASHERKEYGEAR BOXCAPGASKET(CAP)THRUST BUSHSEAT RETAINERRETAINER BOLTBUSH BEARINGGASKETHANDWHEELCAP BOLTCAP NUTSEAL RING PINSPACERSEAT SURFACE
SEAL RING
LANTERN RINGPLUGGREASE FITTINGDRAIN PLUG
A216 - WCBSTELLITE.6 FacedA217 - CA15A479 - 410A479 - 410GraphiteA576 - 1020 + CrA105 or A576 - 1020(S20C)A193 - B7A194 - 2HA479 - 304 + Nitr.A479 - 410316 SS + GRAPHITE410 SSA576 - 1020(S20C)A193 - B7A194 - 2HA193 - B7 or EQ.STEELA576 - 1045DUCTILEA576 - 1020(S20C) 304 SS + GRAPHITEA479 - 410304SSA193 - B8A479 - 304 + Nitr304 SS + GRAPHITEA53A193 - B7A194 - 2HA479 - 304A479 - 304STELLITE NO.6 FacedDuplex SS + GRAPHITE316 SS + ARAMID316 SS + CERAMICA564 - 630 or 316SS + Nitr.304SSA105CARBON STEEL + Cr. PlatingA105
A217 - WC9STELLITE NO.6 FacedA217 - CA15A479 - 410A479 - 410GraphiteA479 - 410A105 or A576 - 1020(S20C)A193 - B7A194 - 2HA479 - 304 + Nitr.A479 - 410316 SS + GRAPHITE410 SSA576 - 1020(S20C)A193 - B7A194 - 2HA193 - B7 or EQ.STEELA576 - 1045DUCTILEA240 - 304304 SS + GRAPHITEA479 - 410304SSA193 - B8A479 - 304 + Nitr304 SS + GRAPHITEA53A193 - B16A194 - 4A479 - 304A479 - 304STELLITE NO.6 FacedDuplex SS + GRAPHITE316 SS + ARAMID316 SS + CERAMICA564 - 630 or 316SS + Nitr.410 SS410 SS316 SS410 SS
A351 - CF8MSTELLITE.6 FacedA351 - CF8MA564 - 630A479 - 316+HcrGraphiteA479 - 316A351 - CF8A193 - B8A194 - 8A479 - 316 + Hcr. PlatingA564 - 630316 SS + GRAPHITEA564 - 630A576 - 1020 + Zn. PlatingA193 - B8A194 - 8A193 - B7+Hcr or EQ.304 SSA576 - 1045DUCTILEA240 - 316316 SS + GRAPHITEA479 - 316A240 - 316A193 - B8MA479 - 316 + Hcr. Plating316 SS + GRAPHITEA53A193 - B8A194 - 8A479 - 316A479 - 316STELLITE NO.6 FacedDuplex SS + GRAPHITE316 SS + ARAMID316 SS + CERAMICA564 - 630 or 316 S + Nitr.316 SS316 SS316 SS316 SS
PK_86
• NOTE1. VALVE DESIGN : ASME B16.342. FACE TO FACE DIMENSION : API 609 (WAFER TYPE)3. END FLANGE DIMENSION : ASME B16.5
TOB VALVES - WATER TYPE - DIMENSIONS UNIT : mm
Inch mm C152.4190.5215.9241.3298.4361.9431.8476.3539.7577.8635.0749.3
h----------
1 1/8-81 1/4-8
a----------
28.631.8
h119.119.122.222.222.225.425.428.628.631.8
--
H252274290320384434520544646663698813
H1228250266296344394470494578595630743
H2142162170179210243287316349381412475
D2200200200200300300400400500500500600
L1165165165165270270335335375375375485
TYPEF07F07F07F07F10F10F14F14F16F16F16F25
C170707070
102102140140165165165254
n444444444448
h29999
1111181822222218
21273235537495
131165230280450
L4854575764718192
102114127154
CLASS 150
SIZE FLANGE DIMENSION MOUNTING BASE Weight(Kgf )
Inch34568
10121416182024
mm80
100125150200250300350400450500600
C168.2200.0234.9269.8330.2387.3450.8514.3571.5628.6685.8812.8
h-----
1-81 1/8-81 1/8-81 1/4-81 1/4-81 1/4-81 1/2-8
a-----
25.428.628.631.831.831.838.1
h122.222.222.222.225.4
-------
H252274310375450499562616676711796914
H1228250295336400449497551606641721837
H2142162170199227265302328367402432530
D2200200300300400400500500600600700700
L1165165270270335335375375485485520515
TYPEF07F07F10F10F14F14F16F16F25F25F30F30
C17070
102102140140165165254254298298
n444444448888
h299
11111818222218182222
2127384572
135148208298382450680
L48545959738392
117133149159181
CLASS 300
SIZE FLANGE DIMENSION MOUNTING BASE Weight(Kgf )
Inch34568
1012
mm80
100125150200250300
C168.2215.9266.7292.1349.2431.8488.9
h---
1-81 1/8-81 1/4-81 1/4-8
a---
25.428.631.831.8
h122.225.428.6
----
H289370405420490545630
H1249320355370425480560
H2148180195225225310330
D2200300400400500500600
L1270335335335375375485
TYPEF07F10F14F14F16F16F25
C170
102140140165165254
n4444448
h29
111818222218
29385575
136200295
L54647878
102117140
CLASS 600
SIZE FLANGE DIMENSION MOUNTING BASE Weight(Kgf )
※NOT SPECIFIED CLASS AND SIZE, PLEASE CONTACT TO SALES DEPARTMENT
34568
10121416182024
80100125150200250300350400450500600
PK_89
• NOTE1. VALVE DESIGN : ASME B16.342. FACE TO FACE DIMENSION : API 609 (LUG TYPE)3. END FLANGE DIMENSION : ASME B16.5
TOB VALVES - LUG TYPE - DIMENSIONS UNIT : mm
CLASS 150
SIZE FLANGE DIMENSION MOUNTING BASE Weight(Kgf )
CLASS 300
SIZE FLANGE DIMENSION MOUNTING BASE Weight(Kgf )
CLASS 600
SIZE FLANGE DIMENSION MOUNTING BASE Weight(Kgf )
※NOT SPECIFIED CLASS AND SIZE, PLEASE CONTACT TO SALES DEPARTMENT
Inch34568
10121416182024
mm80
100125150200250300350400450500600
C152.4190.5215.9241.3298.4361.9431.8476.3539.7577.8635.0749.3
h5/8-115/8-113/4-103/4-103/4-107/8-97/8-9
1-81-8
1 1/8-81 1/8-81 1/4-8
a15.815.819.119.119.122.222.225.425.428.628.631.8
n148888
12121216162020
H252274290320384434520544643660695813
H1228250266316344394470494578595630743
H2142162170179208241267316349381412475
D2200200200200300300400400500500500600
L1165165165165270270335335375375375485
TYPEF07F07F07F07F10F10F14F14F16F16F16F25
C170707070
102102140140165165165254
n444444444448
h29999
1111181822222218
233036395983
110153193258318507
L4854575764718192
102114127154
Inch34568
10121416182024
mm80
100125150200250300350400450500600
n1888
121216162020242424
H252274319375450499562616616711798914
H1228250295336400449497551606641721837
H2142162170199227265302328367402432530
D2200200300300400400500500600600700700
L1165165270270335335375375375485520515
2432445283
151172249352449534812
L48545959738392
117133149159181
C168.2200.0234.9269.8330.2287.3450.8514.3571.5628.6685.8812.8
h3/4-103/4-103/4-103/4-107/8-9
1-81 1/8-81 1/8-81 1/4-81 1/4-81 1/4-81 1/2-8
a19.119.119.119.122.225.428.628.631.831.831.838.1
TYPEF07F07F10F10F14F14F16F16F25F25F30F30
C17070
102102140140165165254254298298
n444444448888
h299
11111818222218182222
Inch34568
1012
mm80
100125150200250300
n144488
1216
32456788
157237343
L54647878
102117140
C168.2215.9266.7292.1349.2431.8488.9
h3/4-107/8-9
1-81-8
1 1/8-81 1/4-81 1/4-8
a19.122.225.425.428.631.831.8
H289370405420490545630
H1249320355370425475560
H2150181210223255309330
D2300400400400500600600
L1270335335335375485485
TYPEF10F14F14F14F16F25F25
C1102140140140165254254
n4444488
h211141818221818
PK_91
• NOTE1. VALVE DESIGN : ASME B16.342. FACE TO FACE DIMENSION : ISO 5752 (SHORT TYPE)3. END FLANGE DIMENSION : ASME B16.5
TOB VALVES - DOUBLE FLANGE(SHORT) TYPE - DIMENSIONS UNIT : mm
Inch34568
10121416182024
mm80
100125150200250300350400450500600
D191229254279343406483533597635699813
g127.0157.2185.7215.9269.7323.9381.0412.8469.9533.4584.2692.2
C152.4190.5215.9241.3298.4361.9431.8476.3539.7577.8635.0749.3
t19.124.024.025.428.530.331.835.136.639.743.047.8
h5/8-115/8-113/4-103/4-103/4-107/8-97/8-9
1-81-8
1 1/8-81 1/8-81 1/4-8
a15.815.819.119.119.122.222.225.425.428.628.631.8
n148888
12121216162020
h119.119.122.222.222.225.425.428.628.631.831.835.1
H252274319340384434520544643660695813
H1228250295316344394470494578595630743
H2142162170179208241267316349381412473
D2200200200200300300400400500500500600
L1165165165165270270335335375375375485
TYPEF07F07F07F07F10F10F14F14F16F16F16F25
C170707070
102102140140140165165254
n444444444448
h29999
1111181822222218
273541456897
133188238302380599
L114127140140152165178190216222229267
CLASS 150
SIZE MOUNTING BASE Weight(Kgf )
FLANGE DIMENSION
Inch34568
10121416182024
mm80
100125150200250300350400450500600
D210254279318381445521584648711775914
g127.0157.2185.7215.9269.7323.9381.0412.8469.9533.4584.2692.2
C168.2200.0234.9269.8330.2387.3450.8514.3571.5628.6685.8812.8
t28.531.835.036.641.247.850.853.957.260.563.569.9
h3/4-103/4-103/4-103/4-107/8-9
1-81 1/8-81 1/8-81 1/4-81 1/4-81 1/4-81 1/2-8
a19.119.119.119.122.225.428.628.631.831.831.838.1
n1888
121216162020242424
h122.222.222.222.225.428.631.831.835.135.135.141.2
TYPEF07F07F10F10F14F14F16F16F25F25F30F30
C17070
102102140140165165254254298298
n444444448888
h299
11111818222218182222
27355263
101176210315440558670
1025
L114127140140152165178190216222229267
CLASS 300
SIZE MOUNTING BASE Weight(Kgf )
FLANGE DIMENSIONH
252274319375450499562616616711798914
H1228250295336400449497551606641721837
H2142162170199227265302328367402432530
D2200200300300400400500500600600700700
L1165165270270335335375375485485520515
Inch34568
1012
mm80
100125150200250300
D210273330356419508559
g127.0157.2185.7215.9269.7323.9381.0
t31.838.144.547.855.763.566.6
n1888
12121620
TYPEF07F10F14F14F16F16F25
C170
102140140165165254
n4444448
h29
111818222218
375586
109192296421
L180190200210230250270
CLASS 600
SIZE MOUNTING BASE Weight(Kgf )
FLANGE DIMENSIONh1
22.225.428.628.631.835.135.1
C168.2215.9266.7292.1349.2431.8488.9
h3/4-107/8-9
1-81-8
1 1/8-81 1/4-81 1/4-8
a19.122.225.425.428.631.831.8
H289370405420490545630
H1265330355370425480560
H2148180195225255310330
D2200300400400500500600
L1165270335335375375485
※NOT SPECIFIED CLASS AND SIZE, PLEASE CONTACT TO SALES DEPARTMENT
PK_93
UNIT : mmSIZE
Ød
L
H1
H2
H3
P
ØW
2 1/2
6546
139.74-Ø19
7516775
170150
3
8048
152.44-Ø19
8317775
170150
4
10054
190.58-Ø19
9419575
170150
5
12556
215.98-Ø22.3
9521875
170150
6
15057
241.38-Ø23
12723775
170150
FLANGE
RATING
ØC
n-Øh Dr.
DIMENSION AND WEIGHT
P
øWH3
n- øh Dr.
øCH2
H1
DISC
SEAT
BODY RETAINER
High-Performance Type Butterfl y Valves- Extention of seat durablity for double eccentricity (metariallzation row abrasion of seat)- Easy changing seat and parts due to standard for all structures (reduce maintenance cost)
DOUBLE ECCENTRIC TYPE
STANDARD MATERIAL SPECIFICATIONS
NO. PART NAME MATERIAL
123456789
10111213141516
BODYDISCSEATSHAFTRETAINER BOLTUPPER BUSHLOWER BUSHRETAINERDISC PINPACKING GLANDPACKINGEND COVERGASKETBRACKETGEAR BOXHAND WHEEL
A216 WCBA351 CF8PTFEA276 304A193 Gr. B8316S.S+PTFE316S.S+PTFEA240 304A276 304B584C83600TEFLONA36GRAPHITEA36ASS’YA126CLB
A351 CF3MA351 CF3MPTFEA276 316LS.S 316L316S.S+PTFE316S.S+PTFEA240 316LA276 316LB584C83600TEFLONA240 316LGRAPHITEA36ASS’YA126CLB
B148 C95800B148 C95800PTFEA276 316A193 Gr. B8M316S.S+PTFE316S.S+PTFEA240 316A276 316B584C83600TEFLONB148C95800GRAPHITEA36ASS’YA126CLB
PK_94
UNIT : mmSIZE
Ød
L
H1
H2
H3
P
ØW
8
20064
298.58-Ø22.3
-196295100200250
10
25071
362.012-Ø25.4
-237337100200250
12
30081
431.812-Ø25.4
-264360100200250
FLANGE
RATING
ØC
n-Øh Dr.
n-h TAP
14
35092
476.3-
12-1”305331109270310
16
400102
539.7-
16-1”345461109270310
18
450114
577.9-
16-1 1/8”372489126290390
20
500127
635.0-
20-1 1/8”420565126290390
22
550154
692.1-
20-1 1/4”440628142330390
24
600154
749.3-
20-1 1/4”471654142330390
DIMENSION AND WEIGHT
P
øWH3
n- øh Dr.
øCH2
H1
DISC
SEAT
BODY RETAINER
STANDARD MATERIAL SPECIFICATIONS
NO. PART NAME MATERIAL
123456789
10111213141516
BODYDISCSEATSHAFTRETAINER BOLTUPPER BUSHLOWER BUSHRETAINERDISC PINPACKING GLANDPACKINGEND COVERGASKETBRACKETGEAR BOXHAND WHEEL
A216 WCBA351 CF8PTFEA276 304A193 Gr. B8316S.S+PTFE316S.S+PTFEA240 304A276 304B584C83600TEFLONA36GRAPHITEA36ASS’YA126CLB
A351 CF3MA351 CF3MPTFEA276 316LS.S 316L316S.S+PTFE316S.S+PTFEA240 316LA276 316LB584C83600TEFLONA240 316LGRAPHITEA36ASS’YA126CLB
B148 C95800B148 C95800PTFEA276 316A193 Gr. B8M316S.S+PTFE316S.S+PTFEA240 316A276 316B584C83600TEFLONB148 C95800GRAPHITEA36ASS’YA126CLB
PK_95
P
LH
3H
2H
1
STANDARD MATERIAL SPECIFICATIONS
NO. PART NAME MATERIAL
123456789
1011
BODYDISCSEATSHAFTDISC BOLTPACKINGPACKING GLANDGLAND BOLTLEVERINDICATORLEVER BOLT
A216 WCBA351 CF8EPDMA276 410A193 B8NBRA36A193 B7A36A36A193 B7
A351 CF3MA351 CF3MVITONA276 316LS.S 316LVITONA240 316A193 B8MS.S 304S.S 304A193 B8M
B148 C95800B148 C95800EPDMMONEL K500MONEL K500NBRA240 316A193 B8MS.S 304S.S 304A193 B8M
UNIT : mmSIZE
L
H1
H2
H3
P
WEIGHT(Kg)
2
4358
13034
2334.5
2 1/2
4665
14234
2335.5
3
4678
15034
2626.0
4
5293
16334
2626.5
5
5611617634
2628.5
6
5612818534
26210
DIMENSION AND WEIGHT
CONCENTRIC TYPERubber Seat Butterfly Valves (Concentric Design)- We intend from ceaseless technical development effort to zero leakage ratio and minimize valve torque. We manufacture to be used on optimum condition to various actuator of "pneumatic"etc.
PK_96
L
E
P
øW
H3
H2
H1
UNIT : mmSIZE
L
H1
H2
H3
P
E
ØM
WEIGHT(Kg)
2
4358
13029
15044
1506.5
2 1/2
4665
14229
15044
1507.0
3
4678
15029
15044
1507.5
4
5293
16329
15044
1508.5
5
5611617629
15044
15010.5
6
5612818529
15044
15011.5
8
6015523045
20065
25015.5
10
6823126736
20065
25031
12
7826731036
20065
25042
14
7829733845
27080
31050
16
10233237545
27080
31093
18
11435039045
27080
310110
20
12739442255
29085
390165
22
15443046055
29085
390230
24
15445549565
330103390300
DIMENSION AND WEIGHT
STANDARD MATERIAL SPECIFICATIONS
NO. PART NAME MATERIAL
123456789
1011121314
BODYDISCSEATSHAFTDISC BOLTPACKINGPACKING GLANDGLAND BOLTEND COVEREND COVER BOLTGASKETGEAR BOXHANDLEGEAR BOX BOLT
A216 WCBA351 CF8EPDMA276 410A193 B8NBRA36A193 B7A36A193 B7GRAPHITEASS’YA126 BA193 B7
A351 CF3MA351 CF3MVITONA276 316LS.S 316LVITONA240 316A193 B8MA240 316LA193 B8MGRAPHITEASS’YA126 BA193 B8M
B148 C95800B148 C95800EPDMMONEL K500MONEL K500NBRA240 316A193 B8MB148 C95800A193 B8MGRAPHITEASS’YA126 BA193 B8M
PK_97
Ball valves are designed, constructed and tested according to API-6D standards.
All trunnion mounted type ball valves employ a sealing
principle that facilitates all services requiring double block and
bleed integrity.
DESIGN AND TEST
DOUBLE BLOCK AND BLEED
DOUBLE PISTON EFFECT
B ED FCA
UP STREAM DOWN STREAM
BODY CAVITY
(A-C) (D-E)
DOUBLE PISTON EFFECT
(B-C) (D-F)
B ED FCA
BODY CAVITY
UP STREAM DOWN STREAM(A-C) (D-E)
SELF RELIEVING
(B-C) (D-F)
On request the seat rings design may be modified to perform
the double piston effect action. In this case the pressure
acting on both the external and internal side of the seat rings,
results in force pushing the game against the ball, therefore
each seat rings grants the required tightness even if the
pressure is applied in the body cavity. This feature adds an
extra sealing feature to the valve, but to release the possible
over pressure developed into the body cavity it is necessary
to use an exyernal safety relief valve.
All model trunnion mounted type ball valves are supplied with spring-loaded seats to ensure that the seats
are always in contact with the ball. this design providesa very efficient seal even at low line pressure. As the
line pressure increases, the seat is forced into tighter contact with the ball providing a positive shut-off.
SEALING PRINCIPLE
UP STREAM
S SR
BALL VALVES
DOWN STREAM
S SR
PK_100
The secondary metal seat is provided to contact between
the seat and ball in the event the primary non-metallic seat
is destroyed by fire all trunnion mounted type ball valves are
fire-safe designed. The double body and cap seals provide
maximum security. It is fitted with special graphite seals so
as to effectively preclude leakage in the event of fire. All top
trunnion mounted ball valves have been tested to API-607
and API-6FA
FIRE SAFE CONSTRUCTION
All model trunnion mounted type ball valves are designed to provide high integrity shut-off. Upon request,
sealant lubrication fittings are installed. In the event of seat insert or stem seal damage, external or internal
leakage can occur. Emergency sealant injection can save the integrity of the valve by incorporating a sealant
seal around the stem or between the seat and the ball until such time the valve may be properly serviced.
SECONDARY SEAT AND STEM SEALING OPTION
Burned O-Ring
Line Pressure
Metal to Metal Seat
Burned Seat
Graphite Seal
Stem Sealant Injection Seat Sealant Injection
PK_101
All top flanged end products shall have an integrally cast(ISO)actuator mounting pad. This feature provides
for direct mount of gear operators or electric actuators. The additional cast for separate mounting bracket is
eliminated.
The stem seal retainer, with its(2) static viton o-ring seals; Accepts the forces provided by the combination
iso mounting pad/packing gland & transmits those forces as packing/disc spring factory pre-load. A variety of
o-ring seals are available for those exceptionally demanding applications. Field maintenance & costly repairs
are virtually eliminated.
Optional conical disc springs insure adequate loading of packing at all times. Excessive stem torque and
packing deformation due to over-tightening of conventional packing glands is eliminated. The constant
"LOAD" provided by the disc springs compensates for normal wear-repair and maintenance costs are
virtually eliminated.
The high pressure/high temperature packing set is comprised of self-cleaning, die-formed, high-density and
low-density graphite molded packing materials. This unique design eliminates stem galling, lowers required
valve stem torque and increases product performance.
ACTUATOR MOUNTING ISO 5211
STATIC SEALED STEM SEAL RETAINER
SPRING FORCE
PACKING
This option provides premier valve stem sealing characteristics for adverse conditions of extreme pressure/
temperture variations. Designed to meet the most stringent fugitive emission regulations,design is comprised
of an extra deep stuffing box/packing/stem seal retainer & conical disc spring. The disc spring provide
contiuous compression of the packing assembly and compensate for wear.
AT ALL TIMES-STEM SEAL
Ball valves present a particular problem with the build up of static
electricity auound the ball. They have anti-static design which
provides contact between stem and ball, and stem and body to
eliminate static electricity.
ANTI-STATIC DESIGN ISO17292
Actuator Mounting(ISO 5211)
Fire Sealed Graphite Packing
Stem Sealed Lantern Ring
Stem Sealant Fitting
Low Operating Torque(Stem Bush)
Anti-Static Device(ISO 17292)
PK_102
Trunnion mount design locates the low stem trunnion assembly
within the confines of body & cap. In so doing, both the line
pressure and media act upon all valve cavity components
equally.The advantages of such a design include:
1. The pressure & media does not concentrate in one location
only, instead the forces are dispersed equally throughout the
pressurized areas.
2. Ball movement and side loading of lower stem is minimized,
thereby decreasing operational torque valves and improving
stem seal life end.
3. Gurantee the low torque and extend valve life.
TRUNNION LOW STEM DESIGN
The PTFE gasket acts as the primary seal for top
unibody ball valves. the secondary seal is made of
flexible graphite; A material with extremely good
resistance to fire conditions.
UNIQUE DOUBLE SEALING DESIGN AND METAL TO METAL CONTACT
RTFE SeatRTFE Gasket(Primary Seal)
GraphiteGasket(Secondary Seal)
Metal to Metal
APPLICATION OF SEAT PER TEMPERATURE
SEAT METARIAL DESIGN TEMPERATURECLASS
RTFE
RTFE
RTFE
NYLON(DEVLON)
NYLON(DEVLON)
NYLON(DEVLON)
PEEK
METAL
150#
300#
600#
900#
1500#
2500#
ALL CLASS
ALL CLASS
- 50℃ ~ +180℃
- 50℃ ~ +150℃
- 50℃ ~ +100℃
- 45℃ ~ +190℃
- 45℃ ~ +170℃
- 45℃ ~ +160℃
200℃ & OVER
250℃ & OVER
PK_103
H1
(APP
ROX)
W1
NO. PART NAME MATERIAL
123456789
1011121314151617181920
BODYCAPBALLSTEMPACKING GLANDSEAT RINGPACKINGTHRUST BEARING(STEM)CAP GASKETCAP BOLTNUTO-RING(CAP)O-RING(STEM)GLAND BOLTSTOP BOLTLEVER BOLTSTOPPERWASHERLEVERANTI STATIC
A216 - WCBA216 - WCBA351-CF8MA276-316A276-316RTFEGRAPHITEPTFEGRAPHITEA193-B7A194-2HVITONVITONA193-B7A193-B7A283-D+GAL’VA283-D+GAL’VA307-BCARBON STEEL316SS
STANDARD MATERIAL SPECIFICATIONS
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
L
H (A
PPRO
X)ød
W
FLOATING BALL, FULL BORE ASME CLASS 150#, 300#, 600#
PK_104
DIMENSION AND WEIGHTCLASS 150 UNIT : mm
1/2
15108
--
90-
180-
2.2
3/4
20117
--
100-
180-
3.2
1
25127
--
106-
230-
4.8
1 1/2
38165178190128
-250
-8.2
2
50178190216145
-250
-11.5
3
7620321628219517835025028.5
4
10022924130521519835025042.0
6
15239440645728525845030084.5
8
203457470521337325500400
152.0
SIZE
L
Ød
H
H1
W
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
CLASS 300 UNIT : mm
SIZE
L
Ød
H
H1
W
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
CLASS 600 UNIT : mm
SIZE
L
Ød
H
H1
W
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
1/2
15140
--
90-
180-
2.8
3/4
20152
--
100-
180-
3.8
1
25165
--
106-
230-
5.6
1 1/2
38190203190128
-250
-10.5
2
50216232216145
-250
-15.0
3
7628229828219517835025033.0
4
10030532130521519835025050.5
6
152403419457285258450300
108.0
8
203502517521337325500400
184.0
1/2
1516516516590-
180-
3.7
3/4
20191191191100
-180
-5.6
1
25216216216106
-230
-7.8
1 1/2
38241241241128
-250
-13.5
2
50292295292148
-250
-27.5
3
7635635935620118240025053.6
4
10043243543222020250025093.0
6
152559562559290263700300
178.5
8
203660664660340335
1000400
340.5
PK_105
NO. PART NAME MATERIAL
123456789
101112131415161718192021
BODYCAPBALLSTEMSEAT RINGPACKING GLANDCAP BOLTLEVER NUTSTEM NUTSTOPPERLOCKING DEVICEPACKINGGASKETSEAT SEALBACK SEATO-RING(CAP)O-RING(SEAT)THRUST WASHERANTI STATIC DEVICECONICAL SPRINGLEVER
A105A105A276-316A564-630NYLONA276-316A193-B7A194-2HA194-2HA283D+GAL’VA283D+GAL’VGRAPHITEGRAPHITEGRAPHITEGRAPHITEVITONVITONRTFE316SSC.S+GAL’VA108-1020+VINYL
STANDARD MATERIAL SPECIFICATIONS
L
ød
H (A
PPRO
X)
W
FLOATING BALL, FULL BORE ASME CLASS 900#, 1500#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
PK_106
CLASS 900 / 1500 UNIT : mm
1/2
1321621621695
1802.2
3/4
202292292291001803.2
1
252542542541102304.8
1 1/2
383053053051182508.2
SIZE
L
Ød
H
W
B
RF
RTJ
BW
APPROX(Kg)/ WEIGHT(RF)
DIMENSION AND WEIGHT
PK_107
NO. PART NAME MATERIAL
123456789
1011121314151617181920
BODYCAPBALLSTEMPACKING GLANDSEAT RINGPACKINGTHRUST BEARING(STEM)CAP GASKETCAP BOLTNUTO-RING(CAP)O-RING(STEM)GLAND BOLTSTOP BOLTLEVER BOLTSTOPPERWASHERLEVERANTI STATIC
A216 - WCBA216 - WCBA351-CF8MA276-316A276-316RTFEGRAPHITEPTFE316/GRAPHITEA193-B7A194-2HVITONVITONA193-B7A193-B7A283-D+GAL’VA283-D+GAL’VA307-BCARBON STEEL316SS
STANDARD MATERIAL SPECIFICATIONS
H1
(APP
ROX)
W1
L
H (A
PPRO
X)
ød1
ød
W
PK_108
FLOATING BALL,REDUCED BORE ASME CLASS 150#, 300#, 600#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
DIMENSION AND WEIGHTCLASS 150
CLASS 300 UNIT : mm
1/2
1513
140--
90-
180-
2.8
3/4
2015
152--
90-
180-
3.2
1
2520
165--
100-
180-
4.6
1 1/2
3825
190203190106
-230
-8.5
2
5038
216232216128
-250
-13.2
3
7650
282298282145
-250
-31.0
4
10076
30532130519517835025042.5
6
15210040341945721519835025079.8
8
203152502517521285258450300
135.0
10
252203568584559337325500400
220.5
SIZE
L
Ød
Ød1
H
H1
W
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
CLASS 600 UNIT : mm1/2
1513
16516516590-
180-
3.7
3/4
2015
19119119190-
180-
4.8
1
2520
216216216100
-180
-6.5
1 1/2
3825
241241241106
-230
-9.8
2
5038
292295292128
-250
-18.5
3
7650
356359356148
-250
-30.5
4
10076
43243543220118240025067.8
6
152100559562559220202500250
122.5
8
203152660663660290263700300
182.5
SIZE
L
Ød
Ød1
H
H1
W
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
UNIT : mm1/2
1513
108--
90-
180-
2.2
3/4
2015
117--
90-
180-
2.8
1
2520
127--
100-
180-
3.5
1 1/2
3825
165178190106
-230
-5.2
2
5038
178190216128
-250
-10.2
3
7650
203216282145
-250
-22.5
4
10076
22924130519517835025032.5
6
15210039440645721519835025052.5
8
203152457470521285258450300
105.5
10
252203533546559337325500400
180.5
SIZE
L
Ød
Ød1
H
H1
W
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
PK_109
NO. PART NAME MATERIAL
12345678
10111213141516171819212223243132333435
BODYCAPLOWER COVERBALLSEAT RETAINERSTEMLOWER STEMLANTERN RINGCAP BOLTNUTLOWER COVER BOLTPAD BOLTSEAT RINGPACKINGCAP GASKETLOWER COVER GASKETFIRE SAFE SEALTHRUST BEARINGSTEM BEARINGLOWER STEM BEARINGPAD BEARINGO-RINGSPRINGPINGEAR BOXSTEM SEALANT FITTINGDRAIN PLUG
A216-WCBA216-WCBA216-WCBA351-CF8MA351-CF8MA276-316A276-316A276-316A193-B7A194-2HA193-B7A193-B7RTFEGRAPHITEGRAPHITEGRAPHITEGRAPHITEDU-BUSHDU-BUSHDU-BUSHDU-BUSHVITONINCONEL-X750316SSDUCTILE316SS316SS
STANDARD MATERIAL SPECIFICATIONS
L
H (A
PPRO
X)
W1
ød
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
PK_110
TRUNNION BALL, FULL BORE ASME CLASS 150#, 300#, 600#
DIMENSION AND WEIGHTCLASS 150 UNIT : mm
10
254533546559356500272
12
305610622635415500473
14
337686698762485560571
16
387762775838550560875
18
438864876914598710938
20
489914927991640710
1525
24
591106710791143745800
2152
SIZE
L
Ød
H
W
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
CLASS 300 UNIT : mm
10
254568584559362500303
12
305648664635420500502
14
337762778762490560602
16
387838854838555560
1005
18
438914930914603710
1158
20
489991
1010991645710
1825
24
591114311651143750800
2558
SIZE
L
Ød
H
W
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
CLASS 600 UNIT : mm
10
254787791787425560552
12
305838841838475560787
14
337889892889540630849
16
387991994991610710
1489
18
438109210951092655800
2172
20
489119412001194710800
2628
24
591139714061397815900
3392
SIZE
L
Ød
H
W
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
PK_111
NO. PART NAME MATERIAL
123456789
1011121416171820252627282933343536
BODYCAPBALLSTEMSEAT RINGPACKINGCAP GASKETGLAND GASKETFIRE SAFE SEALSEAT RETAINERTRUNNION PLATEGLANDSTEM BEARINGTRUNNION BEARINGPAD BEARINGTHRUST BEARINGO-RINGCAP BOLTNUTGLAND BOLTPAD BOLTPINSPRINGGEAR BOXSTEM SEALANT FITTINGDRAIN PLUG
A216-WCB or A105A216-WCB or A105A315-CF8MA276-316RTFEGRAPHITEGRAPHITEGRAPHITEGRAPHITEA351-CF8MA105+ENPAISI-1020DU-BUSHDU-BUSHDU-BUSHDU-BUSHVITONA193-B7A914-2HA193-B7A193-B7A276-316INCONEL-X750DUCTILE316SS316SS
STANDARD MATERIAL SPECIFICATIONS
L
H (A
PPRO
X)
W1
ød
PK_112
TRUNNION BALL, FULL BORE ASME CLASS 150#, 300#, 600#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
DIMENSION AND WEIGHTCLASS 150 UNIT : mm
16
387762775838503560870
18
438864876914515710
1210
20
489914927991553710
1850
24
591106710791143585800
3180
26
6351143
-1245685800
3770
28
6861244
-1346723900
4635
30
7371295
-1397778900
5370
32
7811371
-1524906900
6960
34
8321473
-1626920900
7950
36
8761524
-1727955900
8950
SIZE
L
Ød
H
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
CLASS 300 UNIT : mm
16
387838854838513560
1480
18
438914930914525710
1685
20
489991
1010991565710
2290
24
591114311651143595800
3610
26
635124512701245705800
4810
28
686134613721346745900
5920
30
737139714221397798900
6740
32
781152415531524926900
8080
34
832162616541626940900
9260
36
876172717561727975900
10280
SIZE
L
Ød
H
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
CLASS 600 UNIT : mm
16
387991994991518710
1580
18
438109210951092535800
2180
20
489119412001194575800
2780
24
591139714061397605900
3930
26
635144814601448615800
5830
28
686154915621549755900
6940
30
737165116641651815900
8560
32
781177817941778940900
9940
34
832193019461930956900
11570
36
876208320982083995900
13530
SIZE
L
Ød
H
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
PK_113
H (A
PPRO
X)
W
L
H (A
PPRO
X)
W1
ød
NO. PART NAME MATERIAL
123456789
11121314151617192021232829303132333536
BODYCAPBALLSTEMLOWER STEMSEAT POCKETSEAT RETAINERLOWER COVERGLANDSEAT RINGPACKINGCAP GASKETLOWER COVER GASKETGLAND GASKETSEAT POCKET SEALSTEM BEARINGPAD BEARINGLOWER STEM BEARINGTHRUST BEARINGO-RINGCAP BOLTNUTLOWER COVER BOLTGLAND BOLTPAD BOLTPINSPRINGGEAR BOX
A215 WCB or A105A216-WCBA351-CF8MA564-630A564-630A351-CF8MA351-CF8MA105AISI-1020NYLONGRAPHITEGRAPHITEGRAPHITEGRAPHITEGRAPHITEDU-BUSHDU-BUSHDU-BUSHDU-BUSH / PTFEVITONA193-B7A914-2HA193-B7A193-B7A193-B7A276-316INCONEL-X750DUCTILE
STANDARD MATERIAL SPECIFICATIONS
PK_114
TRUNNION BALL, FULL BORE ASME CLASS 900#, 1500#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
CLASS 900 UNIT : mm
2
5036837136820515530030052.0
3
7638138438123517840030081.0
4
100457460457270264500400
170.0
6
152610613610
-325
-630
390.0
8
203737740737
-355
-630
640.0
10
254838841838
-450
-630
1070.0
12
305965968965
-520
-630
1610.0
SIZE
L
Ød
H
H1
W
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
CLASS 1500 UNIT : mm
2
5036837136820516030030052.0
3
76470473470240183400300
105.0
4
100546549546275270500400
205.0
6
152705711705
-350
-630
525.0
8
203832841832
-410
-630
880.0
10
254991
1000991
-465
-710
1560.0
12
305113011461130
-565
-710
2355.0
SIZE
L
Ød
H
H1
W
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
DIMENSION AND WEIGHT
PK_115
NO. PART NAME MATERIAL
123456789
1011121416171820252627282933343536
BODYCAPBALLSTEMSEAT RINGPACKINGCAP GASKETGLAND GASKETFIRE SAFE SEALSEAT RETAINERTRUNNION PLATEGLANDSTEM BEARINGTRUNNION BEARINGPAD BEARINGTHRUST BEARINGO-RINGCAP BOLTNUTGLAND BOLTPAD BOLTPINSPRINGGEAR BOXSTEM SEALANT FITTINGDRAIN PLUG
A215 WCB or A105A215 WCB or A105A351-CF8MA276-316RTFEGRAPHITEGRAPHITEGRAPHITEGRAPHITEA351-CF8MA105+ENPAISI-1020DU-BUSHDU-BUSHDU-BUSHDU-BUSHVITONA193-B7A914-2HA193-B7A193-B7A276-316INCONEL-X750DUCTILE316SS316SS
STANDARD MATERIAL SPECIFICATIONS
L
H (A
PPRO
X)
W1
ød
PK_116
TRUNNION BALL, FULL BORE ASME CLASS 900#, 1500#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
DIMENSION AND WEIGHTCLASS 900 UNIT : mm
8
203737740737396630645
10
254838841838485710
1070
12
305965968965531800
1610
14
324102910381029600900
1560
16
375113011401130620900
2240
18
425121912321219700900
3000
20
473132113331321750
10004360
24
571154915681549840
10007030
SIZE
L
Ød
H
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
CLASS 1500 UNIT : mm
8
194832841832410630880
10
241991
1000991495710
1560
12
289113011461130565800
2355
14
317125712761257605900
3020
16
362138414061384625900
4260
18
407153715591537710900
6400
20
457166416861664760
10009300
24
534204320712043850
100014550
SIZE
L
Ød
H
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
PK_117
NO. PART NAME MATERIAL
12345678
10111213141516171819212223243132333435
BODYCAPLOWER COVERBALLSEAT RETAINERSTEMLOWER STEMLANTERN RINGCAP BOLTNUTLOWER COVER BOLTPAD BOLTSEAT RINGPACKINGCAP GASKETLOWER COVER GASKETFIRE SAFE SEALTHRUST BEARINGSTEM BEARINGLOWER STEM BEARINGPAD BEARINGO-RINGSPRINGPINGEAR BOXSTEM SEALANT FITTINGDRAIN PLUG
A216-WCBA216-WCBA216-WCBA351-CF8MA351-CF8MA276-316A276-316A276-316A193-B7A194-2HA193-B7A193-B7RTFEGRAPHITEGRAPHITEGRAPHITEGRAPHITEDU-BUSHDU-BUSHDU-BUSHDU-BUSHVITONINCONEL-X750316SSDUCTILE316SS316SS
STANDARD MATERIAL SPECIFICATIONS
ød1
ød
L
H (A
PPRO
X)
W1
PK_118
TRUNNION BALL, REDUCED BORE ASME CLASS 150#, 300#, 600#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
DIMENSION AND WEIGHTCLASS 150 UNIT : mm
10
254203533546559325400230
12
305254610622635356500282
14
337254686698762356500478
16
387305762775838415500583
18
438337864876914485560889
20
489387914927991550560954
24
591489
106710791143640710
1652
30
737591
1295-
1397745800
4450
SIZE
L
Ød
Ød1
H
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
CLASS 300 UNIT : mm
10
254203568584559325400280
12
305254648664635362500312
14
337254762778762362500521
16
387305838854838420500623
18
438337914930914490560
1025
20
489387991
1010991555560
1180
24
591489
114311651143645710
1950
30
737591
139714221397745800
6100
SIZE
L
Ød
Ød1
H
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
CLASS 600 UNIT : mm
10
254203787791787335400350
12
305254838841838425560605
14
337254889892889425560820
16
387305991994991475560980
18
438337
109210951092540630
1805
20
489387
119412001194610710
2480
24
591489
139714061397710800
3800
30
737591
165116641651815900
5910
SIZE
L
Ød
Ød1
H
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
PK_119
NO. PART NAME MATERIAL
123456789
1011121416171820252627282933343536
BODYCAPBALLSTEMSEAT RINGPACKINGCAP GASKETGLAND GASKETFIRE SAFE SEALSEAT RETAINERTRUNNION PLATEGLANDSTEM BEARINGTRUNNION BEARINGPAD BEARINGTHRUST BEARINGO-RINGCAP BOLTNUTGLAND BOLTPAD BOLTPINSPRINGGEAR BOXSTEM SEALANT FITTINGDRAIN PLUG
A216-WCB or A105A216-WCB or A105A315-CF8MA276-316RTFEGRAPHITEGRAPHITEGRAPHITEGRAPHITEA351-CF8MA105+ENPAISI-1020DU-BUSHDU-BUSHDU-BUSHDU-BUSHVITONA193-B7A914-2HA193-B7A193-B7A276-316INCONEL-X750DUCTILE316SS316SS
STANDARD MATERIAL SPECIFICATIONS
ød1
ød
L
H (A
PPRO
X)
W1
PK_120
TRUNNION BALL, REDUCED BORE ASME CLASS 150#, 300#, 600#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
DIMENSION AND WEIGHTCLASS 150 UNIT : mm
16
387305762775838415500730
18
438337864876914435630
1025
20
489387914927991503710
1210
24
591489
106710791143553710
2100
30
737591
1295-
1397585800
3430
36
876737
1524-
1727778900
6450
SIZE
L
Ød
Ød1
H
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
CLASS 300 UNIT : mm16
387305838854838420500
1010
18
438337914930914440630
1420
20
489387991
1010991510710
1729
24
591489
114311651143560710
2750
30
737591
139714221397590800
4630
36
876737
172717561727785900
8330
SIZE
L
Ød
Ød1
H
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
CLASS 600 UNIT : mm
16
387305991994991425710
1360
18
438337
109210951092445710
1580
20
489387
119412001194518800
2170
24
591489
139714061397575800
3390
30
737591
165116641651605900
5910
36
876737
208320982083815900
10560
SIZE
L
Ød
Ød1
H
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
PK_121
H (A
PPRO
X)
W
ød1
ød
L
H1
(APP
ROX)
W1
NO. PART NAME MATERIAL
123456789
11121314151617192021232829303132333536
BODYCAPBALLSTEMLOWER STEMSEAT POCKETSEAT RETAINERLOWER COVERGLANDSEAT RINGPACKINGCAP GASKETLOWER COVER GASKETGLAND GASKETSEAT POCKET SEALSTEM BEARINGPAD BEARINGLOWER STEM BEARINGTHRUST BEARINGO-RINGCAP BOLTNUTLOWER COVER BOLTGLAND BOLTPAD BOLTPINSPRINGGEAR BOX
A215 WCB or A105A216-WCBA351-CF8MA564-630A564-630A351-CF8MA351-CF8MA105AISI-1020NYLONGRAPHITEGRAPHITEGRAPHITEGRAPHITEGRAPHITEDU-BUSHDU-BUSHDU-BUSHDU-BUSH / PTFEVITONA193-B7A914-2HA193-B7A193-B7A193-B7A276-316INCONEL-X750DUCTILE
STANDARD MATERIAL SPECIFICATIONS
PK_122
TRUNNION BALL, REDUCED BORE ASME CLASS 900#, 1500#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
DIMENSION AND WEIGHTCLASS 900 UNIT : mm
2
5038
36837136819514830030045.0
3
7650
38138438120515530030058.0
4
10076
457460457235178400300
105.0
6
152100610613610270264500300
230.0
8
203152737740737
-325
-400
470.0
10
254203838841838
-355
-630
530.0
12
305254965968965
-450
-630
1200.0
SIZE
L
Ød
Ød1
H
H1
W
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
CLASS 1500 UNIT : mm
2
5038
36837136819514830030045.0
3
7650
47047347020516030030075.0
4
10076
546549546240183400300
130.0
6
152100705711705275270500300
301.0
8
203152832841832
-350
-400
615.0
10
254203991
1000991
-410
-630
1085.0
12
305254
113011461130
-465
-630
1850.0
SIZE
L
Ød
Ød1
H
H1
W
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
PK_123
NO. PART NAME MATERIAL
123456789
1011121416171820252627282933343536
BODYCAPBALLSTEMSEAT RINGPACKINGCAP GASKETGLAND GASKETFIRE SAFE SEALSEAT RETAINERTRUNNION PLATEGLANDSTEM BEARINGTRUNNION BEARINGPAD BEARINGTHRUST BEARINGO-RINGCAP BOLTNUTGLAND BOLTPAD BOLTPINSPRINGGEAR BOXSTEM SEALANT FITTINGDRAIN PLUG
A215 WCB or A105A215 WCB or A105A351-CF8MA276-316RTFEGRAPHITEGRAPHITEGRAPHITEGRAPHITEA351-CF8MA105+ENPAISI-1020DU-BUSHDU-BUSHDU-BUSHDU-BUSHVITONA193-B7A914-2HA193-B7A193-B7A276-316INCONEL-X750DUCTILE316SS316SS
STANDARD MATERIAL SPECIFICATIONS
ød1
ød
L
H (A
PPRO
X)
W1
PK_124
TRUNNION BALL, REDUCED BORE ASME CLASS 900#, 1500#
- R.F FLANGED ENDS TO ASME B16.5
- B.W. ENDS TO ASME B16.25
- R.T.J FLANGED ENDS TO ASME B16.5
- SIZE 26" AND LARGER, FLANGED ENDS
ACCORDING TO ASME B16.47 SER.A OR SER.B
- CONSULT US FOR LARGER SIZE
END CONNECTION
DIMENSION AND WEIGHTCLASS 900 UNIT : mm
8
203152737740737375630470
10
254203838841838396630530
12
305254965968965485710
1200
14
324305
102910381029531800
1695
16
375305
113011401130531800
1790
18
425324
121912321219600900
2240
20
473375
132113331321620900
2970
24
571473
154915681549750
10005580
SIZE
L
Ød
Ød1
H
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
CLASS 1500 UNIT : mm
8
194146832841832320630615
10
241194991
1000991410630
1085
12
289241
113011461130495710
1850
14
317289
125712761257565800
2620
16
362289
138414061384565800
2890
18
407317
153715591537605900
5348
20
457362
166416861664625900
6950
24
534457
204320712043760
100011520
SIZE
L
Ød
Ød1
H
W1
APPROX(Kg)/ WEIGHT(RF)
B
RF
RTJ
BW
PK_125
serves as efficient stop valves with flow in
either direction. They are commonly used
where a min imum of pressure drop is
important because they offer practically no
resistance to flow when fully open. Throttling
is not conducive to accurate and consistent
flow control. Also the valves may be damaged
by the high velocity across the seats. They
function best fully open or fully closed.
API 800, 1500ANSI 150, 300, 600, 900, 1500, 2500
3/8", 1/2", 3/4", 1", 11/4", 11/2", 2"
ASTM A105, A182-F5, A182-F9, A182-F11,A182-F22, A182-F304, A182-F316, A182-F304L, A182-F316L, A182-F321, A182-F347, A182-F51, A182-F91, A350-LF2Other Materials also Available on Application
Socket welding, threadedButt welding, flanged
Bolted bonnet or welded bonnetOutside screw & yokeSolid wedge discRenewable seat
DESCRIPTION
CLASS
SIZE
MATERIAL
END CONNECTION
FEATURE
GATE VALVES
FORGED STEEL VALVES
PK_128
STANDARD MATERIAL SPECIFICATIONSASTM SPECIFICATIONS(SPECS-GRADES/TYPES)
No. PART NAMEPART
Q’TY A105
12457
12131415161718192021222324
11112411
1set122212111
A105A105A276-410A217-CA15A276-410+STLA193-B7
A105
A194-2H
A182-F304A182-F304A276-304A351-CF8A276-304+STL’
F304
A182 A182
F304L F316L F1 F5 F9 F11 F22
A182-F1A182-F1
A182-F5A182-F5
A182-F9A182-F9A276-410A217-CA15A276-410+STL’A193+B7SS304+Graphite
A182-F11A182-F11
A182-F22A182-F22
F316
SS304+Graphite
A182 F304 A105
SS316+GraphiteA276-304Graphite
A193-B8
A276-304A276-410A276-410A197AluminumSS400+Zn PLATE
A182-F316A182-F316A276-316A351-CF8MA276-316+STL’
A182-F304LA182-F304L
A182-F316LA182-F316L
BodyBonnetStemDiscSeat RingBonnet BoltGasketGlandGland PackingGland FlangeGland BoltGland Bolt NutGland Bolt PinSleeveSleeve WasherHandwheelNameplateHandwheel Nut
A194-8 A194-2H
A193-B8
(1)A105 also Available with 0.25% Maximum Carbon.
Other Materials also Available on Application.
PK_129
DN
1015202532405010152025324050
CLASS
REDUCED
FULL
600
&
800
PORT VALVE SIZE
CENTER TOTOP, OPEN
END TO ENDHAND WHEEL
DIAMETERPORT
DIAMETER APPROX.
WEIGHTH L W d
mm
133133149178210222257133149178210222257292
mm
73738796
121141161738796
121141161170
mm
909090
1051251251509090
105125125150165
mm
1010131925303710131925303743
kg
1.51.41.92.74.85.48.91.41.92.74.85.48.9
11.2
lb
3.33.14.26.0
10.611.919.63.14.26.0
10.611.919.624.7
DIMENSION AND WEIGHT
BOLTED BONNET OS &Y
CLASS 600 & 800
Bolted Bonnet
L
APP
ROX.
H(O
PEN
)
W
PK_130
CLASS
FULL
900
&
1500
PORT VALVE SIZE
CENTER TOTOP, OPEN
END TO ENDHAND WHEEL
DIAMETERPORT
DIAMETER APPROX.
WEIGHTH L W d
DN
10152025324050
mm
233233245300331355439
mm
9696
121141161172200
mm
150150150200200200245
mm
10131925303737
kg
2.32.34.85.48.9
15.225.4
lb
5.15.1
10.611.919.634.556.0
DIMENSION AND WEIGHT
WELDED BONNET
CLASS 900 & 1500
Seal Welded Bonnet
L
APP
ROX.
H(O
PEN
)
W
PK_131
DIMENSION AND WEIGHT
DN
152025324050
FULL2500
H L W d
mm
245300331335439481
mm
121141161172200220
mm
150200200200245315
mm
111420262938
kg
2.94.85.48.9
26.833.4
lb
6.3910.511.919.659.173.6
CLASS PORT VALVE SIZE
CENTER TOTOP, OPEN
END TO ENDHAND WHEEL
DIAMETERPORT
DIAMETER APPROX.
WEIGHT
WELDED BONNET
CLASS 2500
Seal Welded Bonnet
L
APP
ROX.
H(O
PEN
)
W
PK_132
Globe Valve is ideal for throttling service.
Their flow characteristics permit accurate and
repeatable flow control. However, caution
must be exercised to avoid extremely close
throttling when pressure drop exceeds 20%.
This creates excessive noise, vibration, and
possibly damage to valves and piping.
API 800, 1500
ANSI 150, 300, 600, 900, 2500, 4500
3/8", 1/2", 3/4", 1", 11/4", 11/2", 2"
ASTM A105, A182-F5, A182-F9, A182-F11, A182-F22, A182-F304, A182-F316, A182-F304L, A182-F316L, A182-F321, A182-F347, A182-F51, A182-F91, A350-LF2Other Materials also Available on Application
Socket welding, threadedButt welding, flanged
Bolted bonnet or welded bonnetOutside screw & yokePlug disc
Integral seat
DESCRIPTION
CLASS
SIZE
MATERIAL
END CONNECTION
FEATURE
GLOBE VALVES
PK_133
ASTM SPECIFICATIONS(SPECS-GRADES/TYPES)
No. PART NAMEPART
Q’TY A105
1245
12131415161718192022232425
1111411
1set122211111
A105A105A276-410A217-CA15A193-B7
A105
A194-2H
A182-F304A182-F304A276-304A351-CF8
F304
A182 A182
F304L F316L F1 F5 F9 F11 F22
A182-F1A182-F1
A182-F5A182-F5
A182-F9A182-F9A276-410A217-CA15A193+B7SS304+Graphite
A182-F11A182-F11
A182-F22A182-F22
F316
SS304+Graphite
A182+F304 A105
SS316+GraphiteA276-304Graphite
A193-B8
A276-304A276-410A197AluminumA108-1020A307-B
A182-F316A182-F316A276-316A351-CF8MA193-B8
A182-F304LA182-F304L
A182-F316LA182-F316L
BodyBonnetStemDiscBonnet BoltGasketGlandGland PackingGland FlangeGland BoltGland Bolt NutGland Bolt PinSleeveHandwheelNameplateHandwheel WashorHandwheel Net
A194-8 A194-2H
Bolted Bonnet
BOLTED BONNET OS &Y
GLOBE VALVES
PK_134
STANDARD MATERIAL SPECIFICATIONS
BOLTED BONNET OS &Y
CLASS 600 & 800
Bolted Bonnet
L
APP
ROX.
H(O
PEN
)
W
DN
1015202532405010152025324050
REDUCED
FULL
600
&
800
H L W d
mm
134134146177205215248146146177205215248276
mm
73738796
121141161738796
121141161220
mm
909090
1051251251509090
105125125150165
mm
811131925283611131922283242
kg
1.51.41.92.74.95.89.31.41.92.74.95.89.3
11.2
lb
3.33.14.26.0
10.812.820.53.14.26.0
10.812.820.524.7
CLASS PORT VALVE SIZE
CENTER TOTOP, OPEN
END TO ENDHAND WHEEL
DIAMETERPORT
DIAMETER APPROX.
WEIGHT
DIMENSION AND WEIGHT
PK_135
DIMENSION AND WEIGHT
DN
10152025324050
REDUCED
900
&
1500
H L W d
mm
177177177205215248276
mm
879696
121141161172
mm
105105105125125150165
mm
8111319252836
kg
1.91.92.74.95.89.3
20.4
lb
4.24.26
10.812.820.544.9
CLASS PORT VALVE SIZE
CENTER TOTOP, OPEN
END TO ENDHAND WHEEL
DIAMETERPORT
DIAMETER APPROX.
WEIGHT
BOLTED BONNET OS &Y
CLASS 900 & 1500
Bolted Bonnet
L
APP
ROX.
H(O
PEN
)
W
PK_136
DIMENSION AND WEIGHT
DN
152025324050152025324050
FULL
FULL
1500
2500
H L W d
mm
233245299325347433245299325347433486
mm
96121141161172200121141161172200220
mm
150150200200200245150200200200245315
mm
131819253236111419252838
kg
6.758.9
16.518.426.433.518.418.318.326.426.433.5
lb
14.8819.6236.3740.5658.273.9
40.5640.3440.3458.458.273.9
CLASS PORT VALVE SIZE
CENTER TOTOP, OPEN
END TO ENDHAND WHEEL
DIAMETERPORT
DIAMETER APPROX.
WEIGHT
WELDED BONNET OS &Y
CLASS 1500 & 2500
Seal Welded Bonnet
L
APP
ROX.
H(O
PEN
)
W
PK_137
have an advantage over most other types of check valves in that they need only a relatively short lift to obtain full valve opening. The lift check valve uses a free-moving closure element that is placed above the seat. It prevents backflow and maintains pressure. The lift check valve is recommended to install in horizontal piping lines because the disc is pushed up by the flow until the flow reverses when gravity and down stream pressure close the closure element against the seat.
prevent reversal of flow through pipe lines. The swing check valve uses a hinged door to open during flow and to close against a pressure reversal. Most dong-kang swing check valves can be installed in horizontal or vertical upward flow piping. They offer low resistance to flow and are particularly suited to low velocity service
API 800, 1500
ANSI 150, 300, 600, 900, 1500, 2500, 4500
API 800, 1500ANSI 150, 300, 600, 900, 1500
3/8", 1/2", 3/4", 1", 11/4", 11/2", 2"
3/8", 1/2", 3/4", 1", 11/4", 11/2", 2"
ASTM A105, A182-F5, A182-F9, A182-F11, A182-F22, A182-F304, A182-F316, A182-F304L, A182-F316L, A350-LF2
ASTM A105, A182-F5, A182-F9, A182-F11,A182-F22, A182-F304, A182-F316, A182-F304L, A182-F316L, A182-F321, A182-F347, A182-F51, A182-F91, A350-LF2Other Materials also Available on Application
SOCKET WELDING, THREADEDBUTT WELDING, FLANGED
Socket welding, threadedButt welding, flanged
BOLTED COVER OR WELDED COVERINTEGRAL SEAT
Bolted cover or welded coverRenewable seat
DESCRIPTION
DESCRIPTION
LIFT CHECK VALVES
SWING CHECK VALVES
CLASS
CLASS
SIZE
SIZE
MATERIAL
MATERIAL
END CONNECTION
END CONNECTION
FEATURE
FEATURE
LIFT CHECK
SWING CHECK
LIFT CHECK VALVES
PK_138
NO. PART NAME Q’TYA105
1
3
5
12
13
23
1
1
1
4
1
1
A105
A105
A276-410
A193-B7
A182-F304
A182-F304
A276-304
F304 F304L
SS304+Graphite SS316+Graphite
MATERIAL-ASTM
F316LF316
A182-F316
A182-F316
A276-316
A182-F304L
A182-F304L
A193-B8
Aluminum
A182-F316L
A182-F316L
Body
Cover
Disc
Cover Bolt
Gasket
Nameplate
LIFT CHECK
BOLTED COVER
LIFT CHECK VALVES
PK_139
STANDARD MATERIAL SPECIFICATIONS
DIMENSIONS & WEIGHTS
DN
1015202532405010152025324050
REDUCED
FULL
600
&
800
H L d
mm
515155657684
1015155657684
101116
mm
73738796
121141161738796
121141161220
mm
811131925283610131922283242
kg
1.31.21.32.14.04.77.11.31.32.14.04.77.1
10.7
lb
2.92.62.94.68.8
10.415.62.92.94.68.8
10.415.623.5
10152025324050
REDUCED1500
6565657684
101116
879696
121141161172
8111319252836
1.21.22.14.04.77.1
10.5
2.62.64.68.8
10.415.623.1
CLASS PORT VALVE SIZE
CENTER TOTOP, OPEN
END TO ENDPORT
DIAMETER APPROX.
WEIGHT
BOLTED COVER
CLASS 600 & 1500
LIFT CHECK
L
APP
ROX.
H
PK_140
DIMENSIONS & WEIGHTS
DN
152025324050152025324050
FULL
FULL
1500
2500
H L d
mm
657380
1001101407380
100110140160
mm
96121141161172200121141161172200220
mm
131822283235111419252838
kg
2.14.04.77.1
10.712.57.17.17.1
10.710.712.5
lb
4.68.8
10.415.623.527.515.615.615.623.523.527.5
CLASS PORT VALVE SIZE
CENTER TO TOP, OPEN END TO ENDPORT
DIAMETER APPROX.
WEIGHT
WELDED COVER
CLASS 1500 & 2500
LIFT CHECK
L
APP
ROX.
H
PK_141
SWING CHECK
BOLTED COVER
SWING CHECK VALVES
NO. PART NAME Q’TYA105
135789
1011121323
11111111411
A105A105A276-410A276-410A194-2H
A193-B7
A182-F304A182-F304A276-304A276-304
F304 F304L
SS304+Graphite SS316+Graphite
MATERIAL-ASTM
F316LF316
A182-F316A182-F316A276-316A276-316
A351-CF8M
A276-316
A182-F304LA182-F304L
A194-8
A276-316
A193-B8
Aluminum
A182-F316LA182-F316L
BodyCoverDiscSeat RingRetaining NutHingeHinge PinSupporterCover BoltGasketNameplate
PK_142
STANDARD MATERIAL SPECIFICATIONS
DIMENSIONS & WEIGHTS
DN
1015202532405010152025324050
REDUCED
FULL
800
H L d
mm
515155657684
1015155657684
101116
mm
73738796
121141161738796
121141161170
mm
1010131925303710131925303743
kg
1.11.01.42.24.04.16.01.01.42.24.04.16.0
10.6
lb
2.422.23.0
4.858.89.0
13.22.23.0
4.858.89.0
13.223.3
10152025324050
REDUCED1500
6565657684
101116
879696
121141161172
10131319253037
1.41.42.24.04.16.09.3
3.23.25.09.29.4
13.820.5
CLASS PORT VALVE SIZE
CENTER TO TOP, OPEN END TO ENDPORT
DIAMETER APPROX.
WEIGHT
BOLTED COVER
CLASS 800 & 1500
SWING CHECK
L
APP
ROX.
H
PK_143
Locking device(Gear)
Locking device(Chain & Padlock)
Balance valve By-pass valve
Dashpot
Dashpot Detail
Live-loading
Live-loading Detail
PK_147