full mpi catalog

MAINTENANCE PRODUCTS INC. • (800) 523-2367 (219) 696-6411 Index-1

Symbols12-Volt Rechargeable Battery 10-68

AAbrasives

Aluminum Grinding 13-2Chop Saw 13-3Crocus Cloth 13-5Cupstones 13-2Cut-Off Wheels 13-2, 13-3Depressed Center Wheels 13-1Emery Cloth 13-5Fiber Discs 13-7Flap Discs 13-7Flaring Cupstones 13-2FlexFinish Discs 13-6Flex Grinding Wheels 13-1Grinding Discs 13-1Hand Pads 13-8Masonry

Cut-Off Wheels 13-3Grinding Wheels 13-1

Metal Grinding 13-1Mounted Points 13-3Quick-Lok Discs 13-6Resin Fiber Discs 13-7Sanding Screen 13-5Screen-Bak 13-5Shop Rolls 13-5Surface Conditioning Discs 13-6Trim-Kut® Discs 13-5Utility Rolls 13-5Zirconia Grinding Wheels 13-1

Absorbent 15-13Accessories 15-30Accessory Bolts 9-3Acetylene 16-3

Fittings 16-2Flashback Arrestors 16-2Torch Tips 16-4Welding Hose 16-3

Acid Brushes 14-4Adapters

"A" Taper Drill Bit 12-9Bench Grinding Wheel 13-4Cut-Off Wheel 13-2, 13-3Hydraulic 10-58Threaded Arbor Reducing 14-2Trim Kut Disc 13-5Wire Wheel 14-1

Adhesive Remover 15-3Adhesive Removers

Water Based 15-3

Adhesives 15-1, 15-3Black Max® 15-1Cyanoacrylate 15-1Fast Tack 55 15-3Fast Tack 85 15-3Fast Tack 87 15-3Fast Tack 92 15-3Fixmaster 15-1, 15-2Fixmaster®

Magna-Crete 15-2Heavy Duty 15-3Hi-Tack 15-17Hi-Temp 15-3Instant 15-1J-B Weld 15-2Magic Metal 15-2Prism 15-1RTV Silicone 15-19Super Bonder® 15-1Weatherstrip 15-1

Air BrakeFittings

Copper Tube 10-15Hose, Type B 10-34Nylon (NTA) 10-16, 10-17Push-In 10-21

Hose, Type B 10-4Tubing, Nylon 10-4

Air Chucks 9-15Quick Disconnect 10-34, 10-38

Air Cocks, Brass 10-27Air Couplers

Quarter Turn 10-49Quick Disconnect 10-34Straight Thru 10-38

Aircraft Cable 11-18Air Gauge 10-45Air Hose

Crimper 10-46Push On 10-2Rubber 10-1Self-Storing 10-1

Air LineFilters 10-44Lubricators 10-44Manifold 10-44Pressure Gauges 10-45Regulators 10-44

Air Tank Pop-Off Valves 10-28Air Tool Oil Light Viscosity 15-23Akro Bins 18-11Alligator Clips 9-9Alloy Chain Links 11-16Alloy Steel Chain Slings 11-11

Alloys, Welding 16-1, 16-2All-Thread (Rod) 2-6Aluminum

Polish/Cleaner 15-12Aluminum Grinding Wheels 13-2Anaerobics 15-4, 15-5Anchor Chain

Grade 30 11-7Grade 40 11-8

AnchorsCinder Block 1-25Concrete Screw 1-22Drive type 1-23Drywall 1-24Hollow Wall 1-24Kap-Toggle 1-25Lag Screw Shield 1-23Molly 1-24Nail 1-23Plastic Screw 1-24Self-Drilling Wallboard 1-24Stud 1-21Tap-Con type 1-22Tap-It 1-23Toggle Bolts/Wings 1-25Vinyl Screw 1-23Wallboard 1-24Wedge 1-21Wej-it 1-22Zip-Toggle 1-25

Anderson Connectors 9-6Anti-Corrosion Washers 15-14Anti-freeze

Gas Line 15-28Windshield Washer 15-28

Anti-Seize Lubricant 15-21Copper 15-21Nickel 15-21Silver 15-21

Anti-Spatter 15-14Arbors

Cut Off Wheel 13-3, 14-3Hole Saw 12-18Wire Wheel Brush 14-1, 14-2

Arc Welding Rods 16-1Assortment Index 18-3, 18-4, 18-

5, 18-6Assortments/Kits

Battery Terminal 9-1Blind Rivets 1-27Burs, Carbide 12-10Carbide Burs 12-10Car Reamers 12-6Clamps 10-6

Index

Index-2 FAX: (219)-696-6413 • WEBSITE: http://www.mpi-online.com

Concrete Screw Tool Kit 1-23Drill Set, 1/2" Shank Brute 12-5Drill Set, 3/8" Shank 12-5Drill Set, Aircraft 12-1Drill Set, Brute 12-14Drill Set, Cobalt 12-2Drill Set, Left Hand 12-7Drill Set, Letter Gauge 12-3Drill Set, LH with Extractors 12-8Drill Set, Sheeters 12-6Drill Set, Wire Gauge 12-3Fittings

Hydraulic Hose 10-57Parker Hose Ends 10-57Pipe (iron) 10-33

Flat Socket Head Cap Screw 1-14Gr 8 Flange Screw 1-10Hex Cap Screws

Grade 5 USS 1-1Grade 8 Black USS 1-9Grade 8 Zinc SAE 1-7Grade 8 Zinc USS 1-5

Hole Saw Sets 12-18Hose Clamps 10-6Metric 'O' Rings 6-2Nutsert Tool Kit 2-5Rivets 1-27Screw Extractors w/drills 12-7Set Screw 1-16Socket Head Cap Screw 1-12Tap & Die Sets 12-12Tap-Drill Sets 12-12

Auto-Electric Sealing Com-pound 8-13

Automatic RTV Silicone Rubber Adhesive 15-20

Automatic Wire Stripper 17-2Automotive Care

Battery Protector 15-13Battery Terminal Corrosion Stop-

per 15-14Battery Terminal Protective Wash-

ers 15-14Brake Fluid Pump 15-31Disc and Drum Brake Fluid 15-28Gas Line Antifreeze & Fuel Dry-

er 15-28Lock-Thaw 15-29Starting Fluid 15-28Windshield Spray De-Icer 15-29Windshield Washer Ready

Mix 15-28Aviation Gasket Sealant 15-18Aviation Snips 17-1

BBack Up Washers, Rivet 1-27Baling Wire 8-10Ball Foot Chucks 9-15Ball Tip Markers 15-17Ball Valves 10-29Barrel

Faucets 15-31Barrel Pump 15-30

Rotary 15-30Bar Stock 2-7Bathroom Cleaner 15-13Battery

Accessory Bolts 9-3Anti-Corrosion Washers 9-7, 15-

14Bolts 9-2Booster Cables 9-9Cable 9-8

Butt Splices 9-5Crimper 9-8Lug 9-5

Charger Connectors 9-6Cleaner 15-12Hold-Downs 9-4Nuts 9-2Rechargeable 10-68Slugs 9-7Starter Lugs 9-5Terminal

Adapters 9-3Brush 9-7Crimping Tools 9-8Gauge 17-4Lugs, Compression 9-3Lugs, Heavy Duty 9-5Nuts 9-2Washers 15-14

Terminals 9-3, 9-4Compression 9-3Crimp/Solder Type 9-2Emergency 9-4Fork Lift 9-6Marine 9-4Military Style 9-4Quick Disconnect 9-6Retro-Fit 9-2Safe-Mate 9-6Side Mount 9-4Top Mount 9-2Truck 9-4


per 15-14Battery Terminals 9-1

FusionTM 9-1Bearing Separators 17-2Belt Dressing 15-14Bench Brushes 14-4Bend Protectors, Hose 10-1Bent Pull Pins 7-3Big Rig Paints 15-16Binder Chains 11-9Binders, Load 11-10Bins

Corrugated 18-11Plastic (Akro style) 18-11Steel Storage 18-7, 18-11

Bits, Insert 17-7Black Max® Adhesive 15-1Blades

Hack Saw 12-15Jig/Sabre 12-16Reciprocating Saw 12-15Utility Knife 17-13

Blaster Penetrant 15-26Blast-Off Safety Solvent - NON-

FLAMMABLE 15-8Bolt Cutters 17-1Bolt Gauges 17-4Bolts

Battery 9-2Carriage 1-18, 1-19Carriage, S/S 5-4Elevator 1-19Hex

Grade 2 1-1Grade 5 UNC 1-3Grade 5 USS 1-2Grade 8 Black USS 1-8, 1-9Grade 8 SAE 1-6, 1-7Grade 8 Zinc USS 1-4

Hex FlangeGrade 8 Black SAE 1-10Grade 8 Black USS 1-10

Lag 1-20Shoulder 1-17Stripper 1-17Tap 1-1Toggle 1-25

Bolt SnapsSwivel Eye 11-20

Bondhus Style Wrenches 17-9Booster Cables & Clamps 9-9Botls

HexGrade 8 Zinc USS 1-5

BowTie Locking Cotter 7-2

Index


BoxesCorrugated Shelf 18-11Styrene Parts 18-12

Braces, Broom Handle 14-6Brake

Fluid 15-28Fluid Pump 9-16

Brake CleanerNonChlorinated 15-9Nonflammable 15-9

Brake Fluid Pump 15-31Brake Line Racks 10-24Brake Lines 10-24Brazing Rod 16-1Breakers Circuit 9-12Breakers, Roller Chain 11-21Broom Handles 14-6Brooms

Corn 14-5Floor 14-5Street 14-5Upright 14-5

BrushesAcid 14-4Battery Terminal 9-7Bench 14-4Can, Wheel & Fender 14-4Chip & Oil 14-4Circular End 14-3Cup 14-2Disposable Paint 14-4End 14-3Fender 14-4Floor 14-5Hollow Center End 14-3Mighty-Mite® 14-2Paint 14-4Scratch 14-5Small Angle Grinder 14-2Small Welder's 14-5Tube Fitting 14-4Wire End 14-3Wire Wheel 14-1, 14-3

Brush-On Electrical Tape 15-17Brute Lube 15-23Bug Spray 15-29Bulbs

Flashlight 8-23Headlamp 9-11Miniature 9-10Tuff-Skin Coated 8-19

Bulk Safety Solvent 15-9Bump Caps 16-9Bushings

Machinery 4-6

CCabinets, Drill 12-14Cabinets, Storage 18-10, 18-11Cable

Battery 9-8Booster 9-9Cutter (Copper) 9-8Ferrules 11-18Splices 9-5Starter 9-8Stops 11-18Tie Mounts 8-14Ties 8-14, 8-15Tie Tensioner 8-14Trailer 8-12Welding 16-6

Cable Crimpers 11-19Cables, Jumper 9-9Cable Ties 8-14, 8-15Calipers 17-4Can Brush 14-4Can Liners 17-16Cans, Oil 17-18Caps

Grease Fitting 10-65Caps, Bump 16-9Cap Screws

Button Hd. Socket 1-14Class 8.8

Coarse 6-1Fine 6-2

Class 10.9Coarse 6-2

Flat Socket 6-2Flat Socket Hd. 1-13Socket 6-3Socket Head 1-11, 1-12Stainless Steel 5-1

Caps, Vacuum 10-47Carb & Choke Cleaner 15-9Car Reamers 12-6Carton Sealing Tape 17-15Car Wash & Wax 15-7Caulking Gun 15-20Caulking Guns 17-3Caulk, Silicone 15-20C-Clamps

Drop Forged 16-5Locking 17-6

ChainAlloy Gr 80 11-4

Alloy Gr 100 11-5Anchor

Grade 30 "BBB" 11-7Grade 40 High Test 11-8

Binder ChainGrade 43 11-9Grade 70 11-9

High Test Gr 43 11-2Powder Coated Steel Chain

Black 11-6Red 11-6White 11-6Yellow 11-6

Proof Coil Gr 30 11-1Roller 11-21Security Maxx 11-7Slings 11-11Sprocket 11-21Stainless Steel 11-8

Type 304 11-8Type 316 11-8

Transport Gr 70 11-3Weightlifter's 11-9Weldless 11-12

Double Loop 11-12Jack 11-12Plumber's 11-12Sash 11-12Single Loop 11-12

CHAIN AND CABLE LUBRICANT, FOAMING 15-23

Chain Links 11-15, 11-16, 11-17Alloy Coupling 11-16Cold Shuts 11-15Connecting 11-15Double Clevis Links 11-16Lap 11-15Mid-Links 11-16Quick 11-15Repair 11-15

Charger Clips 9-9Chemicals 15-1Chicago Fittings 10-49Chipping Hammer, Weld 16-6Choke Cleaner 15-9Chop Saw Wheels 13-3Chuck Key Holder 12-10Chuck Keys, Drill 12-10Chucks

Air 9-15Air, Quick Disconnect 10-34, 10-

38Ball Foot 9-15Dual-Foot 9-15

Index


Tire 9-15Circuit Breakers 9-12Citra Crystals Concrete Clean-

er 15-6Citra Crystals Powdered Concrete

Floor Cleaner 15-6Citrus

Degreaser 15-6Clamps

Booster 9-9Double Bolt 10-49Hose 10-6Hose Ferrules 10-46Muffler 9-11Nylon Tubing 8-16Tubing 8-16

Cleaners 15-6, 15-13, 15-14Aluminum and Stainless Pol-

ish 15-12Battery Terminal 15-12Blast-Off Safety Solvent - NON-

FLAMMABLE 15-8Choke & Carb Cleaner 15-9Concentrated Car Wash &

Wax 15-7Concentrated Truck Wash 15-7Contact & Circuit Board Cleaner

III 15-9Contact & Circuit Board Cleaner II

- NONFLAMMABLE 15-9Floor

Citra Crystals Powdered Concrete Floor Cleaner 15-6

Gelled Engine Degreaser 15-8Glass Plus Multi-Purpose Glass

Cleaner 15-7Hand Cleaners

Blue LabelTM Waterless Cream Hand Cleaner 15-10

Citrus-Based Waterless Hand Cleaners 15-10

Extra Heavy Duty 15-11Heavy Duty Paint & Resin Re-

moving 15-11Light Duty 15-11Natural Citrus 15-11Paint & Resin Removing Hand

Cleaner 15-10Towels/Wipes 15-12Waterless 15-10

Industrial Strength Cleaner Wipes 15-12

Liquid Steam Cleaning Concen-trate 15-6

Multipurpose Cleaner & Degreas-er 15-6

NonChlorinated Brake Clean-er 15-9

Nonflammable Brake Clean-er 15-9

Orange Degreaser 15-6Pure EZ Degreaser 15-6Safety Solvent 15-9Steel Shine Metal Cleaner & Pol-

ish 15-12Streak-Free Glass & Mirror Clean-

er 15-7Vandalism Mark Remover 15-10

Cleaning solvent 15-8Clean Sweep 15-13Clear Styrene Boxes 18-12Clevises 11-16, 11-17Clevis Pins 7-6Clips

Alligator 9-9Charger 9-9Closed 8-16Frame 8-15Tester 9-9Wire Loom 8-15

Clothing, Disposable 16-10Cloth Utility Rolls 13-5Clover 15-28Coatings 15-14, 15-17

Inverted Marker 15-16Metal Parts Protector 15-14Quick-Cote+ 15-14Red Insulating Varnish 15-15

Cobra Pliers 17-2Cold Shuts 11-15Collars, Shaft 7-7Combination Nipples 10-50Compact Fluorescent Lights 8-18Concrete Cleaner 15-6Connecting Links

Alloy Chain 11-16Proof Coil Chain 11-15

ConnectorsFork Lift Battery 9-6Pigtail 9-14Wire Cord 8-20

Contact & Circuit Board Cleaner II - NONFLAMMABLE 15-9

Contact Cleaner 15-9Conversion Kits, Nutsert 2-5Copper Anti-Seize 15-21Cord Connectors 8-20Cordless Grease Gun 10-68

CordsDrop 8-18Extension 8-20

Cord Stock (O-Ring) 7-14Corn Brooms 14-5Cotter Pins 7-1Cotter Pins, Locking 7-2Cotters, Hairpin 7-2Countersinks 12-4Coupler Manifold 10-44Couplers

1/4 Turn Air (Chicago) 10-492-Lug 10-4960 Series 10-393000 Series 10-426100 Series 10-436600 Series 10-41Aro Series 10-36Chicago 10-49Connect Under Pressure 10-43Garden Hose 10-48Grease Fitting 10-66Grease Gun 10-66Hydraulic 10-39, 10-43Industrial Series 10-34, 10-35Lincoln Series 10-36Pioneer Series 10-40Push To Connect 10-38Quick Disconnect 10-34, 10-43Straight Thru Series 10-38Threaded Rod 2-7Thread-To-Connect 10-43Tru-flate Series 10-37

Couplings, Hose 10-46Coveralls, Disposable 16-10Crack Sealer (Foam) 15-29Crimper

Air Hose 10-46Battery Terminal 9-8

Crocus Cloth 13-5Cupstones 13-2Cut-Off Wheels

Adapters 13-3, 14-3Chop Saws 13-3Circular Saws 13-2Concrete 13-3Die Grinders 13-2Portable Saws 13-3

CuttersAviation Snips 17-1Bolt 17-1Replacement Wheels 17-2Tubing, Copper 17-2Wire Rope 17-1

Index


CUTTING AND TAPPING FLU-ID 15-22

Cutting Fluid 15-22, 15-23Cutting Tip Refacing Tool 16-5Cutting Tips 16-4Cyanoacrylates 15-1

DDayco Crimp Fittings 10-52, 10-54Dayco Hydraulic Hose 10-2, 10-4Degreaser

Engine 15-8De-Icer

Lock 15-29Windshield 15-29

Die Grinder Wheels 13-2Dies 12-13Die Stocks 12-13Disinfectant Cleaner 15-13

Wipes 15-13Dispensers

Drill Bit 12-14Disposable Coveralls 16-10Disposable Latex Gloves 15-31Dividers

Cabinet 18-10D'Limonene Products. See Citrus

CleanersDouble Clevis Links 11-16Dowel Pins 7-5Drain Cocks, Brass 10-27Drain Pans, Oil 17-18Drawers, Parts 18-9Dresser, Grinding Wheel 13-4Drift Pins 12-9Drill

Adapters 12-9Chuck Keys 12-10Dispensers 12-14Drift Pins 12-9Index Cases 12-14Key Holder 12-10Rod 2-7Saw (Combination) 12-9Tip Kit, Welding 16-5

DrillsAircraft Extension 12-4A Taper Chuck & Adapters 12-9Brute 12-5Carbide Tipped 12-8, 12-9Cobalt 12-2Comb. Drill/Tap 12-9Concrete 12-8, 12-9

Concrete Screw 12-8Double End 12-6Extension 12-4Extra Long 12-4Hole Saw Pilot 12-18Jobber 12-4Left Hand 12-7Letter Gauge 12-3Masonry Hammer 12-8, 12-9

Concrete Screws 12-8Mechanics Length 12-7Multi-Step 12-2Number 12-3, 12-4Reduced Shank 12-5Screw Machine 12-6Sheeters 12-6Short 12-6Silver & Deming 12-5Standard Aircraft 12-1Step 12-2Stubby 12-6Tap 12-9Taper Chuck & Adapters 12-9Taper Length 12-4Unibit style 12-2Wire Gauge 12-3, 12-4

Drill Saw 12-9Drill Tap 12-9Drive Chain 11-21Driver's Gloves 16-12Drive Screws (Rivets) 3-5Drop Cords 8-18Drum

Faucets 15-31Dry Graphite Lube 15-23DRY MOLY FILM LUBRICANT

AND COATING 15-22

EEar Plugs 16-9Economy Silicone Lubricant 15-27Edge Creme Cutting Lube 15-22Edge Lube 15-22Electrical

Alligator Clips 9-9Auto Fuses 9-12Auto Light Bulbs 9-10, 9-11Battery Terminals 9-1, 9-3, 9-4Booster Cables 9-9Contact & Circuit Board Cleaner II

- NONFLAMMABLE 15-9Contact Cleaner 15-9Cord Connectors 8-20

Drop Cords 8-18Extension Cords 8-20Heat Guns 8-20Mastic 8-13Plugs 8-20Protective Tubing 8-21Sealing Compound 8-13Solder 8-17, 16-3Tape 8-13Tubing, Heat Shrink 8-21

Electrical Grade Silicone Spray 15-27

Electrical Tape, Brush-On 15-17Electric Motor Cleaner 15-8Emery Cloth 13-5Enamel Spray Paint 15-15Engine Degreaser 15-8Engine Starting Fluid 15-28Epoxy 15-1, 15-2

Fast Cure 15-1Equipment Cleaner 15-7

Battery Terminal 15-12Choke & Carb Cleaner 15-9Safety Solvent 15-9

Equipment CleanersGelled Engine Degreaser 15-8

Ether (Starting Fluid) 15-28Extension Cord Connectors 8-20Extension Cords 8-20Extensions, Hole Saw 12-18Extractors

Screw 12-8E-Z Outs 12-8

FFace Shields/Headgear 16-9Fast Orange 15-11Fast Tack 55 15-3Fast Tack 85 15-3Fast Tack 87 15-3Fast Tack 92 15-3Faucets, Drum 15-31Ferrules

Air Brake Hose 10-34Air Hose 10-46Cable 11-18Tubing

Copper 10-12Copper A/B 10-15Nylon A/B 10-16, 10-17Polyethylene 10-20

FilesThread Restoring 12-13

Index


Filler Nipples 10-66Filters

Air Line 10-44Welding Lens 16-6

Filter Wrench 9-16Fittings

Adapters 10-58Air Brake

Copper Tube 10-15Hose, SAE 100R5 10-51Hose, Type B 10-34Nylon (NTA) 10-16, 10-17Push-In (DOT) 10-21

Air Hose1/4 Turn/Chicago 10-492-Lug 10-49Couplers 10-34, 10-38Ferrules 10-46Jack Hammer 10-49Quick Disconnect 10-34, 10-38Reusable 10-46Swivels 10-44

Air Manifold 10-44Barbed

Brass 10-46Combination 10-50Fuel & Heater 10-47Garden Hose 10-48King 10-50Multi. 10-46Plastic 10-47Steel 10-50Vacuum 10-47Wiper 10-47

Brake Line 10-14Compression

Copper A/B 10-15Copper (Std.) 10-12Nylon A/B (NTA) 10-15

Couplers 10-34, 10-38, 10-43Crimp

Dayco 10-52Hose Ferrules 10-46Parker 10-54

FlareBrass, SAE 45° 10-18Steel, JIC 37° 10-58, 10-61

Garden Hose 10-48Grease 10-65Hydraulic

Adapters 10-58Coupler Dust Caps 10-39, 10-

43Coupler Mounting Flange 10-43

Couplers 10-39, 10-43Crimp 10-52Crimp (Dayco) 10-52, 10-54Crimp (Parker) 10-54Reusable 10-51, 10-52

Inverted Flare, Brass 10-14Lubrication 10-65O-Ring Adapters 10-61, 10-63Pipe

Brass 10-25, 10-27Iron 10-30Malleable Iron 10-30Steel, Hi Pressure 10-62Steel, Low Pressure 10-30Swivel 10-62

Push-In 10-21Quarter Turn Air Couplings 10-

49Quick Disconnect 10-34, 10-43Reusable

Air Brake 10-51Air Hose 10-46Hydraulic, SAE 100R2 10-52Hydraulic, SAE 100R5 10-51

Steel Barbed Type 10-50Vacuum & Windshield Wash-

er 10-47Fixmaster 15-2Fixmaster® Poxy-Pak 15-1FixmasterTM Pipe Repair Kit 15-28Flame Retardant Welder's Coat 16-

12Flange Sealant 518 15-18Flap Discs 13-7Flap Wheels 13-7Flaring Cupstones 13-2Flashback Arrestors 16-2Flashers 9-12Flashlight

Aluminum 8-22Flat Washers. See WashersFlexFinish® Discs 13-6Flex Grinding Wheels 13-1Flex Wheel 13-1Flints, Spark Lighter 16-5Floor

Broom Handles 14-6Brooms 14-5Squeegees 14-6

Floor CleanersCitra Crystals Powdered Concrete

Floor Cleaner 15-6Floor Sweeping

Clean Sweep 15-13

Safety Absorbent 15-13Flow Check Valves 16-2Fluorescent Work Lights 8-18Flux, Soldering 8-17Foam & Fabric Adhesive 15-3Foam Insulation 15-29Fork Lift Connectors 9-6Fountain Tube Handle 14-4Frame Clips 8-15Frames, Hack Saw 12-15, 12-16FRL's 10-44Fuel Cylinders, Propane 15-29Fuel Line Anti-Freeze 15-28Fuel Line Hose 10-3Fuel System Dryer 15-28Funnels 17-18Fuseholders 9-13Fuses, Automotive 9-12FusionTM SolderTerminals 9-1

GGalvanized Paint Tray 15-30Garbage Bags 17-16Garden Hose 10-48

Fittings 10-48Nozzles 10-48Quick Disconnect Couplers 10-48Washers 10-48

GasketAdhesives/Sealants 15-17, 15-18Makers 15-18, 15-19, 15-20Remover 15-20Sealant, Aviation 15-18Sealant (Hi Tack) 15-17Sealant No. 2 15-18

Gasket Dressing 15-18Gasket Eliminator 15-18Gas Line Anti-Freeze 15-28Gate Valves, Bronze 10-29Gauges

Battery Terminal 17-4Bolt & Nut 17-4Pressure 10-45Screw Pitch 17-4Wire 17-4

Gear Lube 15-24Gelled Engine Degreaser 15-8Glasses, Safety 16-8Glass Fuses 9-12Glass & Mirror Cleaner 15-7Glass Plus Multi-Purpose Glass

Cleaner 15-7Glove Liners 16-11

Index


Gloves 15-31, 15-32, 16-11, 16-12Glue, Super Bonder® 15-1Goggles, Safety 16-7Graffiti Remover 15-10

Wipes 15-12Graphite Lubricant 15-23Grease

Dielectric 15-24High Temp. 15-25Lithium 15-24Lubriplate 15-25Motor Assembly 15-25Multi-Purpose 15-24Red 15-26Wheel Bearing 15-25

GREASEImpact 15-24White Lithium 15-24

Grease Fittings 6-5Accessories 10-66Standard & Metric 10-65

Grease Gun Coupler 10-66Grease Guns 10-67Grease Hose 10-67Great Stuff 15-29Grinding

DiscsDepressed Center 13-1Fiber 13-7Flap 13-7Flex Wheel 13-1Masonry 13-1Metal Cutting 13-1Pipeline Notching 13-1Quick-Lok 13-6Resin Fiber 13-7Trim-Kut 13-5

Wheel Dressers 13-4Wheels

Adapters 13-4Bench 13-4Bushings 13-4Chop Saw 13-3Cut-Off 13-2Flaring Cupstones 13-2Silicon Carbide 13-4

Grip Pins 7-3Grounding

Terminal (Star) 8-3

HHack Saw

Blades 12-15

Frames 12-15, 12-16Hairpin Cotters 7-2Halogen Bulbs 8-19Hammer, Chipping 16-6Hammer Handles 17-17Hand Cleaner 15-10Hand Cleaner Dispensers 15-10Hand Cleaners


Citrus-Based Waterless Hand Cleaners 15-10

Dispensers 15-10Extra Heavy Duty 15-11Heavy Duty Paint & Resin Remov-

ing 15-11Light Duty 15-11Natural Citrus 15-11Paint & Resin Removing 15-10Waterless 15-10

HandlesBroom 14-6Die 12-13Fountain Tube 14-4Hammer 17-17Tap 12-12Truck Wash Brush 14-4

Hanger Iron 9-10Hangers, Tail Pipe 9-11Hard Hats 16-9Headgear

Face Shield 16-9Headlamps 9-11Hearing Protectors 16-9Heater Valves 10-29Heat Guns 8-20Heat Shrink Tubing 8-21Heli Coil Style Inserts 2-2Helmet Liner 16-8Helmets

Protective 16-9Hex Crimp 9-8Hex Key Wrenches 17-9, 17-12Hex Nuts

Grade 5 4-1High Solids Spray Paint 15-15High Temp. Grease 15-25High Test Chain 11-2Hi-Tack Sealant 15-17Hitch Pin Clips 7-2, 7-4Hitch Pins 7-3, 7-4Hi-Temp Anti-Seize Compound

Spray 15-21Hoist Hooks 11-12

Hold-Downs, Battery 9-4Holder

Soapstone 16-8Hole Saws & Arbors 12-17Hole Saw Sets 12-18Hooks

Claw 11-12Gr 100 Self Locking 11-12Grab 11-13

Gr 70 Safety Latch 11-13Gr 70 Transport/Alloy 11-13Gr 70 Twist Lock HD

Latched 11-13Gr 80 Alloy 11-13Gr 100 Alloy 11-13Grade 30 Weldable 11-13Grade 43 High Test 11-13

Hoist 11-12Latch Repair 11-14Screw 1-21Slip 11-14

Gr 70 Transport Safety Latch 11-14

Gr 80 Alloy 11-14Gr 100 Safety Latch 11-14Grade 43 High Test 11-14

T-Grab 11-12Tractor Drawbar 11-12

HoseAir

Coiled 10-1Multi-Purpose Neoprene 10-1Push On 10-2

Air Brake, Type B 10-4Bend Protectors 10-1Coiled 10-1Contractors 10-48Cutters 10-5Garden 10-48Grease Gun 10-67High Pressure 10-3High Pressure, SAE 100R2 10-2Hydraulic

SAE 100R2AT 10-3Lock-On 10-2Low Pressure

Air 10-1Push On 10-2SAE 30R2 10-2SAE 100R4 10-2Shop 10-1

Nylon Coil 10-1Poly-Air 10-1Polyurethane Self-Store 10-1

Index


Pressure Washer 10-3Push-On 10-2Return Line 10-2SAE 100R1 10-2SAE 100R2 10-3Silicone Heater 10-3Strain Relievers 10-1Suction 10-2Vacuum 10-4Water 10-48Welding 16-3Whips

Grease Gun 10-67Windshield/Vacuum 10-4Wiper 10-4

Hose Clamp Rack 10-6Hose Clamps 10-6Hose Crimper 10-46Hose Ends 10-46

Dayco 10-52Parker 10-54

HydraulicBrake Lines 10-24Couplers 10-39, 10-43Grease Fittings 10-65Hose

SAE30R2 10-2SAE 100R2 10-3SAE100R4 10-2

Jack Oil 15-24Hydraulic/Pneumatic

Thread Sealants 15-4

IImpact Driver 17-1Impact Grease 15-24Index Cases, Drill 12-14INSECTICIDE 15-29Insert Bit Holder 17-8, 17-9Insert Bits 17-7, 17-8Insert Systems 2-1Instant Adhesives 15-1Instant Gasket 15-19Insulated Closed Clips 8-16Insulation, Aerosol Foam 15-29Insulators, Alligator Clip 9-9Inverted Marker 15-16

JJack Oil 15-24Jacobs Keys 12-10J-B Weld Epoxy 15-2Jig Saw Blades 12-16

Joint Compound 15-5Jumper Cables 9-9

KKester Solders 8-17, 16-3Key Holder 12-10Keys

Cotter 7-1Drill Chuck 12-10Half Moon 7-6Woodruff 7-6

Key Stock 7-9King Nipples 10-50Kits 18-5, 18-6Knife Blades

Single Edge 17-13Utility 17-13

KnivesPutty 17-14Utility 17-13

Kwik Wipes 15-12

LLamps

Flashlight 8-23Halogen 8-19Miniature 9-10Power Reel 8-18Retractable 8-18Rough Service 8-19Sealed Beam 9-11Trouble 8-18

Lap Links 11-15Lapping and Grinding Com-

pound 15-28Lashing Ties 8-14Latex Gloves 15-31, 16-11Lenses, Welding 16-6Letter Stamp Sets 17-3Lighter, Spark 16-5Lights

Flashlight 8-23Fluorescent Shop 8-18Halogen 8-19Miniature 9-10Power Reel 8-18Retractable 8-18Rough Service 8-19Safety Coated 8-19Sealed Beam 9-11Trouble 8-18

Lil' Brazer Welding Rod 16-1Liners

Trash Can 17-16Winter Helmet 16-8

Liquid Electrical Tape 15-17Liquid Steam Cleaning Concen-

trate 15-6Load Binders 11-10

Lever 11-10Ratchet 11-10Utility Chain Tightener 11-10

Locking Wrenches 17-6Locks, Master 17-14Lock Thaw Deicer 15-29Lock Washers. See WashersLoctite. See ChemicalsLoctite® Threadlockers 15-2Loom Clips 8-15LPS® Cutting Lubricants 15-22Lube Gun 10-67, 10-68Lubricants 15-25, 15-27Lubrication Fittings 10-65Lubricators, Air Line 10-44Lubriplate Greases 15-25Lugs

Power 9-5Starter 9-5

Lugs, Starter 9-3L-Wrenches 17-9Lynch Pins 7-4

MMachinists' Coolant 15-23Magic Metal Epoxy 15-2Magna-Crete 15-2Magnetic Screwdriver Set 17-7Manifold, Air Coupler 10-44Manifold Studs

Metric 6-4Markers, Paint 16-8Marking Tools

Soapstone 16-5Stamps 17-3

Marking Wand 15-16Masking Tape 17-15Masks, Dust & Particle 16-10Masonry

Grinding Discs 13-1Hammer Drills 12-8

Master Links 11-22Master Pad Locks 17-14Mastic, Electrical 8-13Measures, Liquid 17-18Measuring Tools

Battery Terminal 17-4

Index


Bolt & Screw Gages 17-4O-Ring Sizing Cone 7-12Pocket Slide Calipers 17-4Screw Pitch Gages 17-4Tape Measure 17-3

Mechanic's Wire 8-10Metal Armor 15-14Metal Parts Protector 15-14Metal Polish 15-12Metric

Bolt & Nut Gauge 17-4Thread Inserts (Recoil) 2-3

Mid-Links 11-16Mighty-Mite Brushes 14-2MIG Welding Wire 16-2Miniature Light Bulbs, 12V 9-10Miscellaneous Chemicals 15-

28, 15-29Mist Adhesive Spray 15-3Modular Connectors 9-6Moisture Displacer 15-27Moisture Guard 15-26MOLDEX RESPIRATOR 16-10MOLY FILM, Dry 15-22Motor Assembly Grease 15-25Motor Cleaner, Electric 15-8Mounted Flap Wheels 13-7Mounted Grinding Points 13-3Mounts, Cable Tie 8-14Muffler Clamps 9-11Multipurpose Cleaner/Degreas-

er 15-6Multi-surface Disinfecting

Wipes 15-13

NND Vibra-Tite 15-3Needle Valves 10-28Never-Seize 15-21Nickel Anti-Seize Lubricant 15-21No. 2 Gasket Sealant 15-18No-Crimp Butt Connectors 8-4Nozzle Shield, Safe-De-Spat 15-14Nozzles, Water 10-48Number Stamps 17-3Nuts

2-Way Lock 4-3Acorn 4-3Air Cleaner Wing 4-4All Steel Lock 4-2Battery 9-2Cap 4-3Carburetor Wing 4-4

Castle 4-3Class 8 6-5Class 10 6-5Esna 4-2Finished Hex 4-1Flange 4-2Grade 2H 4-4Grade C (8) Lock 4-2Heavy 4-3High 4-4Jack 2-5Jam 4-1Kep 4-2Left Hand 4-4Lock

Nylon Insert 6-5Locking 4-3Machine Screw 4-3Mirror 2-5Nutserts 2-4Nylon Insert, Reg 4-2Nylon Insert, Thin 4-2Oval Lock 4-2Prong Type 4-3Push-On 4-4Reversible Lock 4-3Rivet 2-4, 2-5Rod Coupler 2-7Self Threading 4-4Serrated Lock 4-2Slotted 4-3Spinlock 4-2Square 4-1Stainless Steel Hex 5-4Tee 4-3Thick 4-4Truck U-Bolt 4-4Whiz-Lock 4-2Wing 4-4

Nutserts 2-4Nutsetter, Magnetic 17-8Nuts Off 15-27Nylon

Cable Ties 8-14, 8-15Closed Clips 8-16Mounts 8-14Tubing Clamps 8-16

Adhesive Backed 8-16Nylon Protective Cover 11-7

OOil

Air Tool 15-23

Cutting 15-22Hydraulic Jack 15-24Lubricating 15-25Lubricator 15-21

Oil Drain Pan 17-18Oil Dry 15-13Oilers (Airline Lubricator) 10-44Oil Filter Wrench 9-16One Way Security Screws 3-10Open Gear Lube 15-24Orange-based chemicals. See Citrus

CleanersO-Ring

Cord Stock 7-14Kits 7-14Pick 7-14

O-Rings 7-12, 7-13, 7-14O-Ring Sizing Cone 7-12

PPadlocks 11-7Pad Locks 17-14Pads, Sorbent 15-32Painter's Mitt 15-30Paint Markers 15-17, 16-8Paint Marking Wand 15-16Paint Roller Covers 15-30Paint, Spray 15-15Paper Shop Towels 17-16Parker Crimp Fittings 10-3Parker Hydraulic Hose 10-3Parts Bins 18-7, 18-11Parts Cleaning Solvent 15-8PB B'laster Penetrant 15-26Penetrant

Nonflammable 15-26Penetrants

Nuts Off 15-27Penetrating Lubricant, NONFLAM-

MABLE 15-26Penetrats

Blast Off 15-26HOIL 15-26

Perforated Strapping 9-10Picks, O-Ring 7-14Pigtail Connectors 9-14

Nylon Closed End 8-5Self-Stripping 8-8, 8-9

PinsBow-Tie Locking Cotters 7-2Clevis 7-6Coiled Spring 7-4Cotter 7-1

Index


Dowel 7-5Expansion 7-5Hairpin Cotter 7-2, 10-49Roll 7-5Spirol 7-4Spring 7-5Taper 7-6

PipeDope 15-5Joint Compound 15-5Thread Compound 15-5Thread Cutting Oil 15-22Wrenches 17-1

Pipe Joint Compound 15-5Pipe Repair Kit 15-28Plastic Tray Liner 15-30Pliers

Cobra 17-2Retaining Ring 7-7Vise Grip 17-5

PlugsExtension Cord 8-20Trailer Connector 8-12

Pop-Off Valves, Safety 10-28Porosity Sealant (Loctite) 15-4Posi-Lock Connectors 8-4Power-LuberTM

12-Volt Cordless Grease Gun 10-68

Power Lugs 9-5Premoistened Towels 15-12Press Fit Assist 15-5Press Fit Repair 15-5Pressure

Gauges, Air 10-45Gauges, Tire 9-16Regulator 10-44Wash Detergent 15-6

Pressure Washer Hose 10-3Primary Wire 8-11Prism Gel Adhesive 15-1Progressive Resistance Weightlifter's

Chain 11-9Proof Coil Chain 11-1Propane 15-29Protective Washers, Battery 15-14Pullers

Roller Chain 11-21Pump

Brake Fluid 9-16Hand Cleaner 15-10

Pure EZ Degreaser 15-6Push-On Hose 10-2Push-on Retainers 4-4

Putty Knives 17-14

QQuarter Turn Air Couplings 10-49Quartz Halogen Bulbs 8-19Quick-Cote+ 15-14Quick-Cutter 9-8Quick Disconnect

Air Couplers 10-34, 10-38Garden Hose Couplers 10-48Hydraulic Couplers 10-39, 10-43

QuickHeat Gun 8-20QuickHold Battery Hold-

Downs 9-4Quick Links 11-15Quick-Lok Grinding Discs 13-6Quick Metal® 15-5QuickStix 248 15-4QuickStix 268 15-4QuickStix534 15-18Quick Stix 534 Hi-Tack Gasket Dress-

ing 15-18QuickStix 561 15-5QuickStix 668 15-18QuickStix C5-A 15-21

RRack

Hose Clamp 10-6Racks

Slide 18-8Wire Spool 18-11

Radiator Drain Valves 10-27Ratchet Straps 11-20Razor Blades & Scraper 17-13Ready Rod 2-6Reamers, Car 12-6Reamer Wrench, Tap and 12-12Reciprocating Saw Blades 12-15Recoil Inserts 2-3Recoil Taps 2-2Recovery Drain Pan 17-18Red Grease 15-26Red Insulating Varnish 15-15Red Silicone 15-19RED SPRAY GREASE 15-23Refacing Tool, Cutting Tip 16-5Repair Links

Welded Chain 11-15, 11-16Resin Fiber Discs 13-7Retainers

Flat Push-On 4-4Hairpins 7-2

Retaining Compound 15-18Retaining Ring Pliers 7-7Retaining Rings

E type 7-11External type 7-9Internal type 7-7

Retro-Fit Terminals 9-2Rivet Nuts 2-4, 2-5Rivets

Blind 1-26, 1-27Drive (Type U) 3-5Nylon Drive 1-23Painted 1-27Pop 1-26, 1-27Stainless Steel 1-27

Rivet Tools 1-25Jaw Sets 1-27Nosepieces 1-27

Rivet Washers 1-27Rod

Brazing 16-1Drill 2-7Forming 2-7Storage Rack 2-6, 18-11Threaded 2-6Welding 16-1

Rod Couplers 2-7Roller Chain 11-21

Breakers 11-21Puller 11-21

Roller Covers, Paint 15-30Roll Pins 7-5Rotary Barrel Pump 15-30Rough Service Bulbs 8-19RTV Sealants 15-19RTV Silicone 15-19Rubber

Coated Tube Clamps 8-16Garden Hose 10-48Gloves 15-32, 16-11O-Rings 7-12, 7-13, 7-14O-Ring Stock 7-14RTV Silicone 15-20Seals (Chicago Ftgs) 10-49Vacuum Caps 10-47

Rubber Adhesive, Silicone 15-20Rubbers, Squeegee 14-6Rubber Straps & Rope 11-20Rules 17-3Rust Preventative 15-26, 15-27

SSabre Saw Blades 12-16

Index


Safe-De-Spat 15-14Safe-Mate Battery Conn. 9-6Safety

Ear Plugs 16-9Face Shields & Visors 16-9Flashback Arrestors 16-2Goggles 16-7Hearing Protectors 16-9Helmets (Bump Caps) 16-9Hook Latch Repair 11-14Light Bulbs, Coated 8-19Pop-Off Valves 10-28Solvent Degreaser 15-8

Safety Absorbent 15-13Safety Pins 7-3Sanding Screen 13-5Saw Blades 12-15Saw-Drill 12-9Saw, Hole 12-17Saw-zall Blades 12-15Scotch-Brite Pads 13-8Scotchlok Performance+ 8-10Scotchlok Splices 8-8, 8-9Scotchlok Wire Nuts 8-9Scraper

Putty Knife 17-14Razor Blade 17-13

Scratch Brushes 14-5Screen-Bak 13-5Screwdriver Bits 17-7Screwdriver Set, Magnetic 17-7Screwdriver Set, Security Bit 17-7Screw Extractors 12-8Screw Gauges 17-4Screws

12PT Counterbore 1-15Adjusting 1-15Allen Head 1-11, 1-12, 1-13, 1-14Button Socket 1-14Cap

Grade 5 UNC 1-3Grade 5 USS 1-2Grade 8 Black USS 1-8Grade 8 SAE 1-6, 1-7Grade 8 USS 1-9Grade 8 Zinc USS 1-4, 1-5

Carriage 1-18, 1-19Carriage, S/S 5-4Chrome trim 3-9Concrete 1-22Construction 3-10Deck 3-5Drill 3-10, 3-12

IndexDrive (Type U) 3-5Drywall 3-5Elevator 1-19Flange

Grade 8 Black USS 1-10Grade 8 SAE 1-10

Flat Socket Hd 1-13Header Teks 3-4Headless Set 1-16, 1-17Lag 1-20Machine 3-2, 3-3, 6-5Metal Building 3-10Phillips Machine 3-3Robertson Head 3-8Self Drilling 3-4, 3-10Self Piercing 3-11Self Tapping 3-4Set 1-16, 1-17

Stainless Steel 5-3Sheet Metal 3-7, 3-8, 3-10Shoulder 1-17Socket Hd.

Alloy Steel 1-11, 1-12Stainless Steel 5-2, 5-3

Square Set 1-15Stainless Steel 5-1Stove Bolts 3-1, 3-2Tap-Con type 1-22Tapping 3-4, 3-7, 3-8, 3-11Teks® 3-10Thread Cutting 3-5Thumb 3-4Trailer 3-4Wafer Hd. 3-12Wall Liner 3-12Wood

Steel 3-6WoodGrip Drill 3-10

SealantAviation Gasket 15-18Hi Tack Gasket 15-17Pipe Joint Compound 15-5Thread 15-5

Sealants 15-18, 15-20Sealed Beam

Headlamps 9-11Sealing Compound 8-13Sealing Tape 17-15Seals

Air Coupler (Chicago) 10-49“O” Ring 7-12, 7-14

Secures Gears, Pro Lock 15-5Security Maxx

Chain 11-7

Nylon Protective Cover 11-7Padlocks 11-7

Security Screws 3-10Separators (Filters) 10-44Set Screws 6-3Shackles 11-16, 11-17

Clevises 11-12Round Pin Anchor 11-12Safety Anchor 11-12Screw Pin Anchor

Alloy 11-17Hot Dipped Galvanized 11-16Stainless Steel 11-17

Websling 11-12Shaft Collars 7-7Shelf Boxes 18-11Shims

Machinery Bushings 4-6Shim Stock 17-16

Shop Air Hoses 10-1Shop Rolls 13-5Shop Towels, Paper 17-16Shrink Tubing, Heat 8-21Silicone

Economy Silicone 15-27RTV 15-19Spray

Electrical Grade 15-27Sledge Hammer Handles 17-17Slide Racks 18-8Slings

Master Link 11-17Repalcement Tag 11-17

SLINGS 11-11Snap Lock Pins 7-4Snaps

Bolt 11-20Double End 11-20Open End 11-20Swivel Rope 11-20

Soapstone & Holders 16-8Solder

Battery Slugs 9-7Soldering Flux 8-17Solvo-Rust Penetrant 15-27Sorbent Pads 15-32Sorbent Pillows 15-32Sorbent Socks 15-32Sound Deadener 15-15Spark Lighters 16-5Spark Plug

Inserts (Recoil) 2-3Thread Repair Kits (Recoil) 2-3

Spectacles, Visitors 16-8


Spirol Pins 7-4Split Bolt Connectors 8-9Split Loom 8-15Split Pins 7-5Spray 15-3Spray Bottles 15-30Spray Paint 15-15Spray Paint, Big Rig 15-16Spray Paint, High Solids 15-15Spring Pins 7-5Sprocket Chain 11-21Spruce Spray Paint 15-15Square Key Stock 7-9Squeegees 14-6Stainless Plumber's Putty 15-29Stainless Steel

Anchors 1-21Button Socket Cap Screws 5-3Cap Screws 5-1Flat Washers 5-5Key Stock 5-8Lock Washers 5-4Machine Screws 5-6Nuts 5-4Polish 15-12Roller Chain 11-21Sheet Metal Screws 5-7Socket Cap Screws 5-2Socket Set Screws 5-3

Stamps, Letter/Figure 17-3Starter Cable 9-8Starter Lugs 9-5Starting Fluid 15-28Stay Bathroom Cleaner 15-13Steam Cleaning Concentrate 15-6STI Taps

UNC/UNF 2-2Stock

Bar (Round) 2-7Storage

BinsAkro 18-11Cardboard 18-11Steel 18-7

Boxes, Styrene 18-12Cabinets 18-10Miscellaneous 18-11Parts Drawers 18-9Racks 18-8, 18-11

Strain Reliever, Hose 10-1Strapping

Perforated 9-10Tape (Filament) 17-15

Straps

Ratchet 11-20Rubber Tarp 11-20Trap 11-20

Street Brooms 14-5String Gloves 16-11Studs

ManifoldMetric 6-4

Suction Hose 10-2Super Bonder® 15-1Super Lube® w/Teflon® 15-25Super-Tef w/Teflon® 15-27Super Weatherstrip Adh. 15-1Surface Cond. Discs 13-6Sweat Bands 16-6Sweeping Compounds

Clean Sweep 15-13Swivels

Air Hose 10-44Grease Gun 10-66

Synthetic Lubricant 15-25

TTail Pipe Hanger 9-11Tamperproof Screws 3-10Tap & Die Sets 12-12Tap-Drill Sets 12-12Tape

Carton Sealing 17-15Electrical 8-13Friction 8-13Glass Cloth 8-13Masking 17-15Measures 17-3Paper 17-15Plastic 8-13Sealing 17-15Strapping (Filament) 17-15

Taper Pins 7-6Tap Magic 15-22Taps

Brute 12-10Combination Drill/Tap 12-9Fractional 12-11Heli Coil 2-2High Speed 12-11Pipe 12-12Sets

3 Piece 12-10Spiral Point, Brute 12-10STI 2-2Wrenches 12-12

Tap Wrenches 12-12

Technical Data“E” Type Rings 7-11External Snap Ring 7-10Fitting Measurement 10-8Fitting Sizes 10-9Hairpin Cotter Sizes 7-2Hex Nut Sizes 4-IIHose Clamp Sizes 10-7Internal Snap Ring 7-8"O" Ring Gauge 7-15Pipe Sizes 10-10, 10-11Pipe Thread Sealing Tips 10-11Stainless Steel 5-9Torx Driver Size Guide 17-7

Teflon®Lubricants 15-25, 15-27Pipe Joint Compound 15-5

Tension Lock Pins 7-4Terminals

3-Way Connectors 8-4Battery 9-1, 9-3, 9-4B/G+ 8-10Bullet 8-5Butt Connectors 8-4, 9-5Closed End 8-5Disconnect 8-3, 8-5Double Male-Female 8-3Electrical Spring Connectors 8-9Flag Quick Disconnect 8-5Fork Tongue 8-3Gel Filled Pigtail 8-9Gel Filled Tap 8-8GM Weather Pack 8-6Grounding 8-3IDC 8-8, 8-9Multi-Stack Disconnects 8-3O/B+ 8-10Open Barrel Quick Slide 8-3Performance+ Connectors 8-10Pigtails 8-5Posi-Lock 8-4Quick Slides 8-3, 8-5Ring Tongue 8-2R/Y+ 8-10Scotchlok Splices 8-8, 8-9ScotchlokTM 2 8-10Scotchlok Wire Nuts 8-9Self-Stripping Pigtail 8-8, 8-9Snap Plug 8-5Snap Spade 8-3Spade 8-3Splices 8-4, 8-9Split Bolt Connectors 8-9Star Ring (Grounding) 8-3

Index


Starter Lug 9-5Starter Lugs 9-5T-Tap Quick Slide 8-8Weather Pack 8-6Wire Nuts 8-10

Tester Clips 9-9T-Handle Tank Wrench 16-5Thimbles, Wire Rope 11-18Thread

Cutting Oil 15-22Files 12-13Sealant, Vibra-Tite 15-3Sealant w/Teflon 15-5

Threaded Rod 2-6Alloy Steel 2-6Left Handed 2-7Metric 2-6Ready Rod 2-6Regular 2-6Stainless Steel 2-7

Threaded Rod Rack 2-6, 18-11Thread Inserts

E-Z Lok 2-4Jack 2-5Nutsert 2-4Recoil 2-2, 2-3

Threadlockers 15-2Thread Pitch Gages 17-4Thread Sealant 565 PST 15-5Thread Sealants 15-4, 15-5

Hydraulic/Pneumatic 15-4Locquic 7649 15-5Permanent 15-4Pipe Joint Compound 15-5Primer 15-5QuickStix 248 15-4QuickStix 268 15-4QuickStix 561 15-5Removable 15-4Teflon® 15-5Threadlocker 242® 15-4Threadlocker 262® 15-4Threadlocker 290 15-4Thread Sealant 545 15-4Thread Sealant 565 PST 15-5

TiesLashing 8-14Nylon Cable 8-14, 8-15

Tinners Fluid 8-17Tip Cleaners, Torch 16-5Tip Drill Kit 16-5Tip Refacing Tool 16-5Tips, Torch 16-4Tire

Chucks 9-15Gauge 9-16Inflator/Gauges 9-16Valve Cap 9-15Valve Cores 9-15Valve Extensions 9-15Valve, tubeless 9-15

Toggle Bolts 1-25Toggle Wings 1-25Toilet/Bathroom Cleaner 15-13Tools

Aviation Snips 17-1Ball End L-Wrench Sets 17-9Battery Filler 9-7Battery Terminal Crimpers 9-8Bearing Separator 17-2Bolt Cutters 17-1Bolt Gauge 6-2Cable Crimping 9-8Cable Cutters 9-8Cable Tie Tensioning 8-14Caulking Gun 15-20Caulking Guns 17-3C-Clamps 16-5Chipping Hammers 16-6Cobra Pliers 17-2Concrete Screw Install Tool 1-23Crimping 9-8Cutting Tip Refacer 16-5Die Stocks 12-13Drive Type Grease Fitting 10-65Fold-Up Hex Key Set 17-12Grease Fitting Driver 10-66Grease Guns 10-67, 10-68Hacksaw Frames 12-15, 12-16Hammer Handles 17-17Heat Gun 8-20Hex Key Wrenches 17-9, 17-12

Long Arm 6-4Short Arm 6-4

Hollow Wall Anchor 1-24, 2-5Hose Crimper 10-46Impact Driver 17-1Insert Bits 17-7, 17-8Locking Pliers 17-5Locking Wrenches 17-6Magnetic Insert Bit Holder 17-

8, 17-9Magnetic Power Nutsetters 17-8Marking Stamps 17-3Nutsert Installation 2-5Oil Filter Wrench 9-16O-Ring Picks 7-14Pipe Wrenches 17-1

Pitch Gage 6-3Pitch Gages 17-4Pocket Slide Caliper 17-4Power Bits 17-7Power-LuberTM 10-68Retaining Ring Pliers 7-7Riveters 1-25Roller Chain 11-21Screwdrivers 17-7, 17-9Security Bit Kit 17-7Soapstone Holders 16-5Tank Wrench 16-5Tape Measures 17-3Tap Wrenches 12-12T-Handle Hex Wrench 17-11, 17-

12Thread Files 12-13Tip Drill Kit 16-5Tire Inflator 9-15Torch Tip 16-5Tubing Cutter 17-2Vise Grip 17-5Welding 16-6Wire Rope Cutter 11-19Wire Rope Swager 11-19Wire Stripper 9-8

Toothbrush, Welder's 14-5Torch

Cutting Tips 16-4Tank Wrench 16-5Tip Cleaners 16-5Tip Refacing Tool 16-5

Torx Insert Bits 17-7Towels, Hand Cleaning 15-12Towels, Paper Shop 17-16Tractor Funnel 17-18Trailer

Cable 8-12Connectors 8-12Pigtails 9-14

Transport Chain 11-3Trash Can Liners 17-16Trigger Sprayers 15-30Trim-Kut® Grinding Discs 13-5TRIPLE PLAY FLYING & CRAWL-

ING INSECTICIDE 15-29Trouble Lights 8-18Truck

Tire Gauge 9-16Truck Wash Concentrate 15-7Tube Fitting Brush 14-4Tubing

Air Brake 10-4Clamps 8-16

Index


Clear Vinyl 10-5Copper 10-5Cutters

Metal 17-2Plastic 10-5

Heat Shrinkable 8-21Hydraulic Brake 10-24Nylon Air Brake 10-4Polyethylene 10-5Steel 10-24Vacuum 10-4Vinyl 10-5Windshield & Vacuum 10-4Wiper 10-4

Tuff-Skin Bulbs 8-19Turbo Towels 15-12Turnbuckles 11-19

Aluminum 11-19Drop Forged Steel 11-19

Turn Signal Flashers 9-12Ty-Raps 8-14, 8-15Tyvek® style Coveralls 16-10

UUltra Blue RTV, Loctite 15-19Ultra Copper RTV, Loctite 15-19Undercoating, Rubberized 15-15Upright Brooms 14-5Utility Blades 17-13Utility Chain Tightener 11-10Utility Knives 17-13Utility Rolls 13-5

VVacuum Caps 10-47Valve-Action Markers 15-17, 16-8Valve-Action Paint Markers 16-8Valve Caps 9-15Valve Cores 9-15Valves

Air Brake 10-27Ball 10-29Barrel Faucet 15-31Drain 10-27Drum 15-31Gate 10-29Heater 10-29Needle 10-28Reverse Flow Check 16-2Safety Pop-Off 10-28Tank 9-15Tire 9-15

Vandalism Mark Remover 15-10

Varnish 15-15Vibra-Tite 15-3ViperLube 15-25Vise-Grips 17-5Visors, Faceshield 16-9

WWarning Flashers 9-12Washers 4-5, 4-6

Alloy Lock 4-6AN 5-5Army-Navy 5-5Backup for Rivets 1-27Battery 15-14Class 8.8 6-4Class 10 6-4Countersunk 4-5, 4-6External Lock 4-6Extra Thick Flat 4-5Fender 4-5Finishing 4-5Flat Machine Screw 4-5Flat USS/SAE 4-5Garden Hose 10-48Hi-Collar Lock 4-6Internal Lock 4-6Lock 4-6, 6-4Machinery Bushings 4-6Machine Screw 4-5Military 5-5MS 5-5Oversize 4-5Plaster 4-5Shakeproof 4-6Socket Cap Screw 4-6Spacers 4-6Spring 4-6Stainless Steel 5-4, 5-5Star 4-6Thick Fender 4-5Thick Flat 4-5Tooth 4-6Trim 4-5Wrought 4-5

Wasp & Hornet Killer 15-29Water Nozzle 10-48WD-40 15-26Weather Pack Shrouds 8-7Weather Pack Terminals 8-6Weatherstrip Adhesive 15-1Web Adhesive Spray 15-3Weightlifter's Chain 11-9Welding

Alloys 16-1, 16-2Brushes 14-5Cable 16-6Coats 16-12Electrodes 16-1Filters 16-6Flashback Arrestors 16-2Goggles 16-7Hammers 16-6Lenses 16-6MIG Wire 16-2Reverse Flow Check Valve 16-2Rod 16-1

Cabinet 18-11Soapstone Markers 16-8Tip Tools 16-5Wire, MIG 16-2

Weldless Chain 11-12Double Loop 11-12Jack 11-12Plumber's 11-12Sash 11-12Single Loop 11-12

Weldors Anti-spatter 15-14Well Nuts 2-5"Wet-Line" Hydraulic Couplers 10-

43Wheel

Dressers 13-4Wheel Bearing Grease 15-25Whisk Brooms 14-5White Lithium Grease 15-24Wicking Grade Loctite 15-4Window Squeegees 14-6Windshield Antifreeze 15-28Windshield De-Icer 15-29Winter Liners 16-8Wipes, Turbo Towels 15-12Wire 8-11, 9-8

Baling 8-10Battery Cable 9-8Cord Connectors 8-20Cup Brush 14-2Cutter, Copper 9-8End Brush 14-3Extension Cords 8-20Hardware 1-21Jacketed 2-conductor 8-11Lock Pins 7-4Loom 8-15Loom Clips 8-15Mechanics 8-10MIG 16-2Nuts 8-10

Index


Parallel 8-12Primary 8-11Protective Cover 8-15Rack 18-11Ribbon 8-12Rope

Lubricant 15-24Scratch Brushes 14-5Solder 8-17, 16-3Starter 9-8Ties 8-14, 8-15Trailer Cable 8-12Wheel Brushes 14-1, 14-3

Wire Brushes 14-1, 14-5Wire Rope 11-18

Clamps 11-18Clips 11-18Crimper 11-19Swager 11-19Thimbles 11-18

Wire Rope Cutter 11-19Woodruff Keys 7-6Work Gloves 16-12Work Lights 8-18Wrenches

Bondhus Style 17-9Filter 9-16Hex Key 17-9, 17-12Pipe 17-1Tap 12-12Vise-Grip 17-5

ZZerks, Grease 10-65Zinc galvanizing spray 15-14Zirconia Grinding Wheels 13-1

Index

Section 1 Fasteners

AAnchors

Cinder Block 1-25Concrete Screw 1-22Drive type 1-23Drywall 1-24Hollow Wall 1-24Kap-Toggle 1-25Lag Screw Shield 1-23Molly 1-24Nail 1-23Plastic Screw 1-24Self-Drilling Wallboard 1-24Stud 1-21Tap-Con type 1-22Tap-It 1-23Toggle Bolts/Wings 1-25Vinyl Screw 1-23Wallboard 1-24Wedge 1-21Wej-it 1-22Zip-Toggle 1-25

Assortments/KitsBlind Rivets 1-27Concrete Screw Tool Kit 1-23Flat Socket Head Cap Screw 1-14Gr 8 Flange Screw 1-10Hex Cap Screws

Grade 5 USS 1-1Grade 8 Black USS 1-9Grade 8 Zinc SAE 1-7Grade 8 Zinc USS 1-5

Rivets 1-27Set Screw 1-16Socket Head Cap Screw 1-12

BBack Up Washers, Rivet 1-27Bolts

Carriage 1-18, 1-19Elevator 1-19Hex

Grade 2 1-1Grade 5 UNC 1-3Grade 5 USS 1-2Grade 8 Black USS 1-8, 1-9Grade 8 SAE 1-6, 1-7Grade 8 Zinc USS 1-4

Hex FlangeGrade 8 Black SAE 1-10Grade 8 Black USS 1-10

Lag 1-20Shoulder 1-17Stripper 1-17Tap 1-1Toggle 1-25

BotlsHex

Grade 8 Zinc USS 1-5

CCap Screws

Button Hd. Socket 1-14Flat Socket Hd. 1-13Socket Head 1-11, 1-12

HHooks

Screw 1-21

RRivets

Blind 1-26, 1-27Nylon Drive 1-23Painted 1-27Pop 1-26, 1-27Stainless Steel 1-27

Rivet Tools 1-25Jaw Sets 1-27Nosepieces 1-27

Rivet Washers 1-27

SScrews

12PT Counterbore 1-15Adjusting 1-15Allen Head 1-11, 1-12, 1-13, 1-14Button Socket 1-14Cap

Grade 5 UNC 1-3Grade 5 USS 1-2Grade 8 Black USS 1-8Grade 8 SAE 1-6, 1-7Grade 8 USS 1-9Grade 8 Zinc USS 1-4, 1-5

Carriage 1-18, 1-19Concrete 1-22Elevator 1-19Flange

Grade 8 Black USS 1-10Grade 8 SAE 1-10

Flat Socket Hd 1-13Headless Set 1-16, 1-17Lag 1-20Set 1-16, 1-17Shoulder 1-17Socket Hd.

Alloy Steel 1-11, 1-12Square Set 1-15Tap-Con type 1-22

Stainless SteelAnchors 1-21

TToggle Bolts 1-25Toggle Wings 1-25Tools

Concrete Screw Install Tool 1-23Hollow Wall Anchor 1-24Riveters 1-25

WWashers

Backup for Rivets 1-27Wire

Hardware 1-21

1-II FAX: (219)-696-6413 • www.mpi-online.com • [email protected] 02/2012

MAINTENANCE PRODUCTS INC. • (800) 523-2367 (219) 696-6411 1-1Revised 02/2012

1/4" dIAMeTeRPart # Size Pkg Qty9-500 1-1/4 1009-501 1-1/2 1009-502 2" 1009-503 2-1/2 1009-504 3" 1009-505 3-1/2 1009-506 4" 100

5/16" dIAMeTeRPart # Size Pkg Qty9-507 1-1/4 1009-508 1-1/2 1009-509 2" 1009-510 2-1/2 1009-511 3" 1009-512 3-1/2 509-513 4" 50

3/8" dIAMeTeRPart # Size Pkg Qty9-514 1-1/2 509-515 2" 509-516 2-1/2 509-517 3" 509-518 3-1/2 509-519 4" 509-520 5" 50

GRAde 2 Hex TAP BOLTS (FULLY THREADED)A threaded to the head fastener for use in pre-tapped holes. Use as leveling screws or as adjust-ment screws found on belt and chain tensioners. Features sharp rolled class 2A threads and chamfered ends.

Tensile strength: 74,000 psi. min.Material: AiSI 1006 - 1025 steelHardness: Rockwell B80-B100 Grade mark: noneFinish: Blue chromate dipped Meets or exceeds ANSI B18.2.1, ASTM A354, SAE J429

1/2" dIAMeTeRPart # Size Pkg Qty9-521 1-1/2 509-522 2" 509-523 2-1/2 509-524 3" 509-525 3-1/2 259-526 4" 259-527 5" 25

Part number 16-0124 GRAde 5 USS CAP SCReW 20 SIZeS STARTeR ASSORTMenTCoarse threads 1/4-1/2" dia. thru 2½" lg. 16-0124-2.....STANDARD ASSORTMENT (contents doubled) 16-0124R....REFILL ONLY

Part number 40-100GRAde 5 USS CAP SCReW 40 SIZeS STARTeR ASSORTMenTHeat treated steel, zinc plated, coarse threads. Sizes 1/4-3/4 dia. thru 4" with Hex Nuts, USS Flat Washers and Lockwashers. 40 hole steel bin included. 40-100-2:STANDARD ASSORTMENT (con-tents doubled) 40-100R REFILL ONLY

Part number 72-100 GRAde 5 USS CAP SCReW 63 SIZeS STARTeR ASSORTMenT Heat treated steel, zinc plated, coarse threads. Sizes 1/4-3/4 dia. thru 4" with Hex Nuts, USS Flat Washers and Lockwashers. 72 hole steel bin included.72-100-2.....STANDARD ASSORTMENT (contents doubled) 72-100R....REFILL ONLY

Part number 80-100GRAde 5 USS CAP SCReW 63 SIZeS STARTeR ASSORTMenT Same as 72-100 except with 80 compartments, 17 of which are empty for future expansion! 2 x 40 hole steel bins included.80-100-2.....STANDARD ASSORTMENT (contents doubled)

Part number 72-110GRAde 5 USS CAP SCReW 63 SIZeS STARTeR ASSORTMenT Heat treated steel, zinc plated, coarse threads. Sizes 1/4-3/4 dia. thru 6" with Hex Nuts, USS Flat Washers and Lockwashers. 72 hole steel bin included.72-110-2.....STANDARD ASSORTMENT (contents doubled) 72-110R....REFILL ONLY

Part number 80-110GRAde 5 USS CAP SCReW 63 SIZeS STARTeR ASSORTMenT Same as 72-110 except with 80 compartments, 17 of which are empty for future expansion! 2 x 40 hole steel bins included.80-110-2.....STANDARD ASSORTMENT (contents doubled)

Grade 5 USS Hex Head Cap Screw Assortments

CALL FOR FULL ASSORTMENT LAYOUTS

1-2 FAX: (219)-696-6413 • www.mpi-online.com • [email protected] 02/2012

7/16"-14 dIAMeTeRWrench Size: 5/8"

Part # Size Pkg QtyNC402-1 3/4 100NC404-1 1" 100NC405-1 1-1/4 100NC406-1 1-1/2 50NC407-1 1-3/4 100NC408-1 2" 50NC409-1 2-1/4 50NC410-1 2-1/2 50NC411-1 2-3/4 25NC412-1 3" 25NC413-1 3-1/4 25NC414-1 3-1/2 25NC415-1 3-3/4 25NC416-1 4" 25NC418-1 4-1/2 25NC420-1 5" 25NC421-1 5-1/2 25NC422-1 6" 25NC424-1 7" 1NC426-1 8" 1

1/2"-13 dIAMeTeR Wrench Size: 3/4"

Part # Size Pkg QtyNC502-1 3/4 50NC504-1 1" 50NC505-1 1-1/4 50NC506-1 1-1/2 50NC507-1 1-3/4 50NC508-1 2" 50NC509-1 2-1/4 50NC510-1 2-1/2 25NC511-1 2-3/4 25NC512-1 3" 25NC513-1 3-1/4 25NC514-1 3-1/2 25NC515-1 3-3/4 25NC516-1 4" 25NC518-1 4-1/2 25NC520-1 5" 25NC521-1 5-1/2 25NC522-1 6" 25NC523-1 6-1/2 1NC524-1 7" 1NC525-1 7-1/2 1NC526-1 8" 1NC528-1 9" 1NC530-1 10" 1

*Sizes over 6" are unplated. Zinc plated through 6" long. All lengths measured from under head.Sizes not listed may be available as a special order (subject to minimum packaging).


Part # Size Pkg QtyNC100-1 1/2 100NC101-1 5/8 100NC102-1 3/4 100NC103-1 7/8 100NC104-1 1" 100NC105-1 1-1/4 100NC106-1 1-1/2 100NC107-1 1-3/4 100NC108-1 2" 100NC109-1 2-1/4 100NC110-1 2-1/2 50NC111-1 2-3/4 50NC112-1 3" 50NC113-1 3-1/4 50NC114-1 3-1/2 50NC115-1 3-3/4 50NC116-1 4" 50NC118-1 4-1/2 50NC120-1 5" 25NC121-1 5-1/2 25NC122-1 6" 25NC124-1 7" 1NC126-1 8" 1


Part # Size Pkg QtyNC200-1 1/2 100NC201-1 5/8 100NC202-1 3/4 100NC203-1 7/8 100NC204-1 1" 100NC205-1 1-1/4 100NC206-1 1-1/2 100NC207-1 1-3/4 100NC208-1 2" 100NC209-1 2-1/4 50NC210-1 2-1/2 50NC211-1 2-3/4 50NC212-1 3" 50NC213-1 3-1/4 50NC214-1 3-1/2 50NC215-1 3-3/4 50NC216-1 4" 50NC218-1 4-1/2 50NC220-1 5" 25NC221-1 5-1/2 25NC222-1 6" 25NC224-1 7" 1NC226-1 8" 1


Part # Size Pkg QtyNC300-1 1/2 100NC301-1 5/8 100NC302-1 3/4 100NC303-1 7/8 100NC304-1 1" 100NC305-1 1-1/4 100NC306-1 1-1/2 100NC307-1 1-3/4 100NC308-1 2" 100NC309-1 2-1/4 100NC310-1 2-1/2 50NC311-1 2-3/4 50NC312-1 3" 50NC313-1 3-1/4 50NC314-1 3-1/2 50NC315-1 3-3/4 50NC316-1 4" 50NC318-1 4-1/2 50NC320-1 5" 25NC321-1 5-1/2 25NC322-1 6" 25NC323-1 6-1/2 1NC324-1 7" 1NC326-1 8" 1

The industry standard for medium strength applications. Features sharp rolled class 2A threads, full washer face and chamfered ends.

Tensile strength: 120,000 psi. min.Material: Medium carbon C1038 steelHardness: Rockwell C25-34 Grade mark: 3 radial linesFinish: Blue chromate dipped (to 1" dia., 6" lgth)Meets or exceeds ASME/ANSI B18.2.1, ASTM , A354, SAE J429

Grade 5 Hex Head Cap Screws USS


1"-8 dIAMeTeRPart # Size Pkg QtyNC1006-1 1-1/2 12NC1007-1 1-3/4 12NC1008-1 2" 12NC1009-1 2-1/4 12NC1010-1 2-1/2 12NC1011-1 2-3/4 12NC1012-1 3" 12NC1013-1 3-1/4 12NC1014-1 3-1/2 12NC1015-1 3-3/4 12NC1016-1 4" 12NC1018-1 4-1/2 12NC1020-1 5" 12NC1021-1 5-1/2 12NC1022-1 6" 12NC1023-1 6-1/2 1NC1024-1 7" 1NC1025-1 7-1/2 1NC1026-1 8" 1NC1027-1 8-1/2 1NC1028-1 9" 1NC1030-1 10" 1NC1032-1 11" 1NC1034-1 12" 1

1-1/8"-7 dIAMeTeRPart # Size Pkg QtyNC1108-1 2" 10NC1110-1 2-1/2 10NC1112-1 3" 10NC1116-1 4" 10NC1120-1 5" 6NC1122-1 6" 6NC1123-1 6-1/2 6NC1124-1 7" 6NC1126-1 8" 6

1-1/4"-7 dIAMeTeRPart # Size Pkg QtyNC1216-1 4" 10NC1220-1 5" 6NC1222-1 6" 6NC1224-1 7" 6NC1226-1 8" 6NC1230-1 10" 1NC1232-1 11" 1


Part # Size Pkg QtyNC704-1 1" 50NC705-1 1-1/4 50NC706-1 1-1/2 25NC707-1 1-3/4 25NC708-1 2" 25NC709-1 2-1/4 25NC710-1 2-1/2 25NC711-1 2-3/4 25NC712-1 3" 25NC713-1 3-1/4 25NC714-1 3-1/2 25NC715-1 3-3/4 25NC716-1 4" 25NC718-1 4-1/2 25NC720-1 5" 25NC721-1 5-1/2 25NC722-1 6" 25NC723-1 6-1/2 1NC724-1 7" 1NC725-1 7-1/2 1NC726-1 8" 1NC727-1 8-1/2 1NC728-1 9" 1NC730-1 10" 1NC732-1 11" 1NC734-1 12" 1

3/4"-10 dIAMeTeR Wrench Size: 1-1/8"

Part # Size Pkg QtyNC804-1 1" 25NC805-1 1-1/4 25NC806-1 1-1/2 25NC807-1 1-3/4 25NC808-1 2" 25NC809-1 2-1/4 25NC810-1 2-1/2 25NC811-1 2-3/4 25NC812-1 3" 25NC813-1 3-1/4 25NC814-1 3-1/2 25NC815-1 3-3/4 25NC816-1 4" 12NC818-1 4-1/2 12NC820-1 5" 10NC821-1 5-1/2 12NC822-1 6" 12NC823-1 6-1/2 1NC824-1 7" 1NC825-1 7-1/2 1NC826-1 8" 1NC827-1 8-1/2 1NC828-1 9" 1NC830-1 10" 1NC832-1 11" 1NC834-1 12" 1


Part # Size Pkg QtyNC906-1 1-1/2 25NC907-1 1-3/4 25NC908-1 2" 25NC909-1 2-1/4 25NC910-1 2-1/2 12NC911-1 2-3/4 12NC912-1 3" 12NC913-1 3-1/4 10NC914-1 3-1/2 10NC915-1 3-3/4 10NC916-1 4" 10NC918-1 4-1/2 10NC920-1 5" 10NC921-1 5-1/2 10NC922-1 6" 10NC923-1 6-1/2 1NC924-1 7" 1NC925-1 7-1/2 1NC926-1 8" 1NC928-1 9" 1NC930-1 10" 1NC932-1 11" 1NC934-1 12" 1

1-1/2"-6 dIAMeTeRPart # Size Pkg QtyNC1422-1 6" 1NC1426-1 8" 1NC1430-1 10" 1


Part # Size Pkg QtyNC604-1 1" 50NC605-1 1-1/4 50NC606-1 1-1/2 25NC607-1 1-3/4 25NC608-1 2" 25NC609-1 2-1/4 25NC610-1 2-1/2 25NC611-1 2-3/4 25NC612-1 3" 25NC613-1 3-1/4 25NC614-1 3-1/2 25NC615-1 3-3/4 25NC616-1 4" 25NC618-1 4-1/2 25NC620-1 5" 25NC621-1 5-1/2 25NC622-1 6" 25NC623-1 6-1/2 1NC624-1 7" 1NC626-1 8" 1

Grade 5 Hex Head Cap Screws UnC


All lengths measured from under head.Sizes not listed may be available as a special order (subject to minimum packaging).


Part # Size Pkg QtyNC100-2 1/2 100NC101-2 5/8 100NC102-2 3/4 100NC103-2 7/8 100NC104-2 1" 100NC105-2 1-1/4 100NC106-2 1-1/2 100NC107-2 1-3/4 100NC108-2 2" 100NC109-2 2-1/4 100NC110-2 2-1/2 50NC111-2 2-3/4 50NC112-2 3" 50NC113-2 3-1/4 50NC114-2 3-1/2 50NC115-2 3-3/4 50NC116-2 4" 50NC118-2 4-1/2 50NC120-2 5" 25NC121-2 5-1/2 25NC122-2 6" 25



Our most popular bolt is ideal for use where strength is a major concern. Stocked in Gold Di-chromated finish and unplated (black finish) Sharp rolled class 2A threads, full washer face and chamfered ends.

Tensile strength: 150,000 psi. min.Material: Medium carbon 4140 steelHardness: Rockwell C33-39 Grade mark: 6 radial linesFinish: Gold Dichromate dipped (to 1" dia., 6" lgth) Meets or exceeds ASME/ANSI B18.2.1, ASTM or unplated (black finish) A354, SAE J429


Part # Size Pkg QtyNC402-2 3/4 100NC404-2 1" 100NC405-2 1-1/4 50NC406-2 1-1/2 100NC407-2 1-3/4 100NC408-2 2" 50NC409-2 2-1/4 50NC410-2 2-1/2 50NC411-2 2-3/4 25NC412-2 3" 25NC413-2 3-1/4 25NC414-2 3-1/2 25NC415-2 3-3/4 25NC416-2 4" 25NC418-2 4-1/2 25NC420-2 5" 25NC421-2 5-1/2 25NC422-2 6" 25


Part # Size Pkg QtyNC502-2 3/4 50NC504-2 1" 50NC505-2 1-1/4 50NC506-2 1-1/2 50NC507-2 1-3/4 50NC508-2 2" 50NC509-2 2-1/4 50NC510-2 2-1/2 25NC511-2 2-3/4 25NC512-2 3" 25NC513-2 3-1/4 25NC514-2 3-1/2 25NC515-2 3-3/4 25NC516-2 4" 25NC518-2 4-1/2 25NC520-2 5" 25NC521-2 5-1/2 25NC522-2 6" 25

3/8"-16 dIAMeTeR Wrench Size: 9/16""


GRAde 8 ZInC Hex CAP SCReWS USS



Part # Size Pkg QtyNC704-2 1" 50NC705-2 1-1/4 50NC706-2 1-1/2 25NC707-2 1-3/4 25NC708-2 2" 25NC709-2 2-1/4 25NC710-2 2-1/2 25NC711-2 2-3/4 25NC712-2 3" 25NC713-2 3-1/4 25NC714-2 3-1/2 25NC715-2 3-3/4 25NC716-2 4" 25NC718-2 4-1/2 25NC720-2 5" 25NC721-2 5-1/2 25NC722-2 6" 25





All lengths measured from under head.Sizes not listed may be available as a

special order (subject to minimum pack-aging).

1"-8 dIAMeTeRPart # Size Pkg QtyNC1006-2 1-1/2 12NC1007-2 1-3/4 12NC1008-2 2" 12NC1009-2 2-1/4 12NC1010-2 2-1/2 12NC1011-2 2-3/4 12NC1012-2 3" 12NC1013-2 3-1/4 12NC1014-2 3-1/2 12NC1015-2 3-3/4 12NC1016-2 4" 12NC1018-2 4-1/2 12NC1020-2 5" 12NC1021-2 5-1/2 12NC1022-2 6" 12


Part # Size Pkg QtyNC906-2 1-1/2 25NC907-2 1-3/4 25NC908-2 2" 25NC909-2 2-1/4 25NC910-2 2-1/2 12NC911-2 2-3/4 12NC912-2 3" 12NC913-2 3-1/4 12NC914-2 3-1/2 12NC915-2 3-3/4 12NC916-2 4" 12NC918-2 4-1/2 12NC920-2 5" 12NC921-2 5-1/2 12NC922-2 6" 12

Part number 72-104 GRAde 8 nC CAP SCReW 63 SIZeS STARTeR ASSORTMenT Alloy steel, zinc plated, coarse threads. Sizes 1/4-3/4 dia. thru 4" with Hex Nuts, USS Flat Washers and Lockwashers. 72 hole steel bin included.72-104-2.....STANDARD ASSORTMENT (contents doubled) 72-104R....REFILL ONLY

Part number 80-104 GRAde 8 nC CAP SCReW 63 SIZeS STARTeR ASSORTMenTSame as 72-104 except with 80 compartments, 17 of which are empty for future expansion! 2 x 40 hole steel bins included. 80-104-2.....STANDARD ASSORTMENT (contents doubled)

Grade 8 USS Zinc Hex Head Cap Screw AssortmentsPart number 16-4824 GRAde 8 nC CAP SCReW 20 SIZeS STARTeR ASSORTMenTCoarse thrds 1/4 - 1/2" dia. thru 2½" lg. 16-4824-2.....STANDARD ASSORTMENT (contents doubled) 16-4824R....REFILL ONLY

Part number 40-102 GRAde 8 nC CAP SCReW 40 SIZeS STARTeR ASSORTMenTAlloy steel, gold zinc plated, coarse threads. Sizes 1/4-3/4 dia. thru 4" with Hex Nuts, USS Flat Washers and Lockwashers. 40 hole steel bin included.40-102-2.....STANDARD ASSORTMENT (contents doubled) 40-102R....REFILL ONLY

GRAde 8 ZInC Hex CAP SCReWS USS

#98-BBC Bin Base (Optional)



Part # Size Pkg QtyNF100-2 1/2 100NF101-2 5/8 100NF102-2 3/4 100NF103-2 7/8 100NF104-2 1" 100NF105-2 1-1/4 100NF106-2 1-1/2 100NF107-2 1-3/4 100NF108-2 2" 100NF109-2 2-1/4 100NF110-2 2-1/2 50NF111-2 2-3/4 50NF112-2 3" 50NF113-2 3-1/4 50NF114-2 3-1/2 50NF115-2 3-3/4 50NF116-2 4" 50NF118-2 4-1/2 50NF120-2 5" 25NF121-2 5-1/2 25NF122-2 6" 25


Part # Size Pkg QtyNF200-2 1/2 100NF201-2 5/8 100NF202-2 3/4 100NF203-2 7/8 100NF204-2 1" 100NF205-2 1-1/4 100NF206-2 1-1/2 100NF207-2 1-3/4 100NF208-2 2" 100NF209-2 2-1/4 50NF210-2 2-1/2 50NF211-2 2-3/4 50NF212-2 3" 50NF213-2 3-1/4 50NF214-2 3-1/2 50NF215-2 3-3/4 50NF216-2 4" 50NF218-2 4-1/2 50NF220-2 5" 25NF221-2 5-1/2 25NF222-2 6" 25


Part # Size Pkg QtyNF402-2 3/4 100NF404-2 1" 100NF405-2 1-1/4 100NF406-2 1-1/2 100NF407-2 1-3/4 100NF408-2 2" 50NF409-2 2-1/4 50NF410-2 2-1/2 50NF411-2 2-3/4 25NF412-2 3" 25NF413-2 3-1/4 25NF414-2 3-1/2 25NF415-2 3-3/4 25NF416-2 4" 25NF418-2 4-1/2 25NF420-2 5" 25NF421-2 5-1/2 25NF422-2 6" 25


Part # Size Pkg QtyNF502-2 3/4 50NF504-2 1" 50NF505-2 1-1/4 50NF506-2 1-1/2 50NF507-2 1-3/4 50NF508-2 2" 50NF509-2 2-1/4 50NF510-2 2-1/2 25NF511-2 2-3/4 25NF512-2 3" 25NF513-2 3-1/4 25NF514-2 3-1/2 25NF515-2 3-3/4 25NF516-2 4" 25NF518-2 4-1/2 25NF520-2 5" 25NF521-2 5-1/2 25NF522-2 6" 25NF524-2B 7" 1NF526-2B 8" 1


Part # Size Pkg QtyNF301-2 5/8 100NF302-2 3/4 100NF303-2 7/8 100NF304-2 1" 100NF305-2 1-1/4 100NF306-2 1-1/2 100NF307-2 1-3/4 100NF308-2 2" 100NF309-2 2-1/4 100NF310-2 2-1/2 50NF311-2 2-3/4 50NF312-2 3" 50NF313-2 3-1/4 50NF314-2 3-1/2 50NF315-2 3-3/4 50NF316-2 4" 50NF318-2 4-1/2 50NF320-2 5" 25NF321-2 5-1/2 25NF322-2 6" 25

GRAde 8 Hex CAP SCReWS SAe


Part # Size Pkg QtyNF604-2 1" 50NF605-2 1-1/4 50NF606-2 1-1/2 25NF607-2 1-3/4 25NF608-2 2" 25NF609-2 2-1/4 25NF610-2 2-1/2 25NF611-2 2-3/4 25NF612-2 3" 25NF613-2 3-1/4 25NF614-2 3-1/2 25NF615-2 3-3/4 25NF616-2 4" 25NF618-2 4-1/2 25NF620-2 5" 25NF621-2 5-1/2 25NF622-2 6" 25NF623-2B 6-1/2 1NF624-2B 7" 1NF626-2B 8" 1

*Sizes over 6" are unplated. Zinc plated through 6" long. All lengths measured from under head.Sizes not listed may be available as a special order (subject to minimum packaging).



Part # Size Pkg QtyNF704-2 1" 50NF705-2 1-1/4 50NF706-2 1-1/2 25NF707-2 1-3/4 25NF708-2 2" 25NF709-2 2-1/4 25NF710-2 2-1/2 25NF711-2 2-3/4 25NF712-2 3" 25NF714-2 3-1/2 25NF715-2 3-3/4 25NF716-2 4" 25NF718-2 4-1/2 25NF720-2 5" 25NF721-2 5-1/2 25NF722-2 6" 25NF724-2B 7" 1NF726-2B 8" 1


Part # Size Pkg QtyNF805-2 1-1/4 25NF806-2 1-1/2 25NF807-2 1-3/4 25NF808-2 2" 25NF809-2 2-1/4 25NF810-2 2-1/2 25NF811-2 2-3/4 25NF812-2 3" 25NF814-2 3-1/2 25NF816-2 4" 12NF818-2 4-1/2 12NF820-2 5" 12NF821-2 5-1/2 12NF822-2 6" 12NF824-2B 7" 1NF826-2B 8" 1

1"-14 dIAMeTeRPart # Size Pkg QtyNF1007-2 1-3/4 12NF1008-2 2" 12NF1009-2 2-1/4 12NF1010-2 2-1/2 12NF1011-2 2-3/4 12NF1012-2 3" 12NF1014-2 3-1/2 12NF1016-2 4" 12NF1018-2 4-1/2 12NF1020-2 5" 12NF1021-2 5-1/2 12NF1022-2 6" 12NF1023-2B 6-1/2 1NF1024-2B 7" 1NF1025-2B 7-1/2 1NF1026-2B 8" 1NF1027-2B 8-1/2 1NF1028-2B 9" 1NF1030-2B 10" 1NF1032-2B 11" 1


Part # Size Pkg QtyNF908-2 2" 25NF909-2 2-1/4 25NF910-2 2-1/2 12NF911-2 2-3/4 12NF912-2 3" 12NF914-2 3-1/2 12NF916-2 4" 12NF918-2 4-1/2 12NF920-2 5" 12NF921-2 5-1/2 12NF922-2 6" 12NF923-2B 6-1/2 1NF924-2B 7" 1NF926-2B 8" 1

GRAde 8 Hex CAP SCReWS SAe

Grade 8 SAe Zinc Hex Head Cap Screw AssortmentsPart number 40-103 GRAde 8 nF CAP SCReW 40 SIZe STARTeR ASSORTMenTAlloy steel, gold zinc plated, fine threads. Sizes 1/4-3/4 dia. thru 4" with Hex Nuts, SAE Flat Wash-ers and Lockwashers. 40 hole steel bin included.40-103-2.....STANDARD ASSORTMENT (contents doubled) 40-103R....REFILL ONLY

Part number 72-106 GRAde 8 nF CAP SCReW 63 SIZe STARTeR ASSORTMenTAlloy steel, zinc plated, fine threads. Sizes 1/4-3/4 dia. thru 4" with Hex Nuts, SAE Flat Washers and Lockwashers. 72 hole steel bin included.72-106-2.....STANDARD ASSORTMENT (contents doubled) 72-106R....REFILL ONLY

1-1/8"-12 dIAMeTeRPart # Size Pkg QtyNF1114-2B 3-1/2 12NF1116-2B 4" 12NF1120-2B 5" 6NF1122-2B 6" 6NF1124-2B 7" 6NF1126-2B 8" 6

1-1/4"-12 dIAMeTeRPart # Size Pkg QtyNF1216-2B 4" 12NF1220-2B 5" 6NF1222-2B 6" 6NF1224-2B 7" 6NF1225-2B 7-1/2 6NF1226-2B 8" 6NF1230-2B 10" 1

1-1/2"-12 dIAMeTeRPart # Size Pkg QtyNF1422-2B 6" 1NF1426-2B 8" 1NF1430-2B 10" 1NF1434-2B 12" 1

*Sizes over 6" are unplated. Zinc plated through 6" long. All lengths measured

from under head.Sizes not listed may be available as a

special order (subject to minimum pack-aging). #98-BBC Bin Base (Optional)


All lengths measured from under head.Sizes not listed may be available as a special order (subject to minimum packaging).


Part # Size Pkg QtyNC100-2B 1/2 100NC102-2B 3/4 100NC104-2B 1" 100NC105-2B 1-1/4 100NC106-2B 1-1/2 100NC107-2B 1-3/4 100NC108-2B 2" 100NC110-2B 2-1/2 50NC112-2B 3" 50NC114-2B 3-1/2 50NC116-2B 4" 50NC124-2B 7" 1NC126-2B 8" 1


Part # Size Pkg QtyNC200-2B 1/2 100NC202-2B 3/4 100NC204-2B 1" 100NC205-2B 1-1/4 100NC206-2B 1-1/2 100NC207-2B 1-3/4 100NC208-2B 2" 100NC210-2B 2-1/2 50NC212-2B 3" 50NC214-2B 3-1/2 50NC216-2B 4" 50NC224-2B 7" 1NC226-2B 8" 1


Part # Size Pkg QtyNC402-2B 3/4 100NC404-2B 1" 100NC405-2B 1-1/4 100NC406-2B 1-1/2 100NC407-2B 1-3/4 100NC408-2B 2" 50NC410-2B 2-1/2 50NC412-2B 3" 25NC414-2B 3-1/2 25NC416-2B 4" 25NC424-2B 7" 1NC426-2B 8" 1


Part # Size Pkg QtyNC504-2B 1" 50NC505-2B 1-1/4 50NC506-2B 1-1/2 50NC507-2B 1-3/4 50NC508-2B 2" 50NC509-2B 2-1/4 50NC510-2B 2-1/2 25NC512-2B 3" 25NC514-2B 3-1/2 25NC516-2B 4" 25NC518-2B 4-1/2 25NC520-2B 5" 25NC521-2B 5-1/2 25NC522-2B 6" 25NC523-2B 6-1/2 1NC524-2B 7" 1NC525-2B 7-1/2 1NC526-2B 8" 1NC528-2B 9" 1NC530-2B 10" 1NC534-2B 12" 1


Part # Size Pkg QtyNC302-2B 3/4 100NC304-2B 1" 100NC305-2B 1-1/4 100NC306-2B 1-1/2 100NC307-2B 1-3/4 100NC308-2B 2" 100NC310-2B 2-1/2 50NC312-2B 3" 50NC314-2B 3-1/2 50NC316-2B 4" 50NC323-2B 6-1/2 1NC324-2B 7" 1NC326-2B 8" 1

GRAde 8 BLACK Hex CAP SCReWS USS


Part # Size Pkg QtyNC623-2B 6-1/2 1NC624-2B 7" 1NC626-2B 8" 1


Part # Size Pkg QtyNC704-2B 1" 50NC705-2B 1-1/4 50NC706-2B 1-1/2 25NC707-2B 1-3/4 25NC708-2B 2" 25NC709-2B 2-1/4 25NC710-2B 2-1/2 25NC712-2B 3" 25NC714-2B 3-1/2 25NC716-2B 4" 25NC718-2B 4-1/2 25NC720-2B 5" 25NC721-2B 5-1/2 25NC722-2B 6" 25NC723-2B 6-1/2 1NC724-2B 7" 1NC725-2B 7-1/2 1NC726-2B 8" 1NC727-2B 8-1/2 1NC728-2B 9" 1NC730-2B 10" 1NC732-2B 11" 1NC734-2B 12" 1


Part # Size Pkg QtyNC806-2B 1-1/2 25NC807-2B 1-3/4 25NC808-2B 2" 25NC809-2B 2-1/4 25NC810-2B 2-1/2 25NC812-2B 3" 25NC814-2B 3-1/2 25NC816-2B 4" 12NC818-2B 4-1/2 12NC820-2B 5" 12NC821-2B 5-1/2 12NC822-2B 6" 12NC823-2B 6-1/2 1NC824-2B 7" 1NC825-2B 7-1/2 1NC826-2B 8" 1NC827-2B 8-1/2 1NC828-2B 9" 1NC830-2B 10" 1NC832-2B 11" 1NC834-2B 12" 1


All lengths measured from under head.Sizes not listed may be available as a

special order (subject to minimum pack-aging).

1"-8 dIAMeTeRWrench Size: 1-11/16"

Part # Size Pkg QtyNC1008-2B 2" 12NC1010-2B 2-1/2 12NC1012-2B 3" 12NC1014-2B 3-1/2 12NC1016-2B 4" 12NC1018-2B 4-1/2 12NC1020-2B 5" 12NC1021-2B 5-1/2 12NC1022-2B 6" 12NC1023-2B 6-1/2 1NC1024-2B 7" 1NC1025-2B 7-1/2 1NC1026-2B 8" 1NC1027-2B 8-1/2 1NC1028-2B 9" 1NC1030-2B 10" 1NC1032-2B 11" 1NC1034-2B 12" 1


Part # Size Pkg QtyNC908-2B 2" 25NC910-2B 2-1/2 12NC912-2B 3" 12NC914-2B 3-1/2 12NC916-2B 4" 12NC918-2B 4-1/2 12NC920-2B 5" 12NC921-2B 5-1/2 12NC922-2B 6" 12NC923-2B 6-1/2 1NC924-2B 7" 1NC925-2B 7-1/2 1NC926-2B 8" 1NC928-2B 9" 1NC930-2B 10" 1NC932-2B 11" 1NC934-2B 12" 1

Grade 8 USS Black Hex Head Cap Screw Assortments

GRAde 8 BLACK Hex CAP SCReWS USS

#98-BBC Bin Base (Optional)

Part number40-B102GRAde 8 USS CAP SCReW 40 SIZeS STARTeRASSORTMenT - BLACKAlloy steel, black finish, coarse threads. Sizes 1/4-3/4 dia. thru 4" with Hex Nuts, USS Flat Washers and Lockwash-ers. 40 hole steel bin included.40-B102-2.....STANDARD ASSORTMENT (contents doubled) 40-B102R....REFILL ONLY

Part number 72-B104GRAde 8 USS CAP SCReW 63 SIZeS STARTeRASSORTMenT, BLACKAlloy steel, black finish, coarse threads. Sizes 1/4-3/4 dia. thru 4" with Hex Nuts, USS Flat Washers and Lockwash-ers. 72 hole steel bin included.72-B104-2.....STANDARD ASSORTMENT (contents doubled) 72-B104R....REFILL ONLY

Part number 80-B104GRAde 8 USS CAP SCReW 63 SIZeS STARTeRASSORTMenT, BLACKSame as 72-B104 except with 80 compartments, 17 of which are empty for future expansion! 2 x 40 hole steel bins included.80-B104-2.....STANDARD ASSORTMENT (contents doubled)

1-1/8"-7 dIAMeTeRWrench Size: 1-11/16"

Part # Size Pkg QtyNC1108-2B 2" 10NC1110-2B 2-1/2 10NC1112-2B 3" 10NC1114-2B 3-1/2 10NC1116-2B 4" 10NC1118-2B 4-1/2 6NC1120-2B 5" 6NC1122-2B 6" 6NC1123-2B 6-1/2 1NC1124-2B 7" 1NC1126-2B 8" 1NC1130-2B 10" 1

1-1/4"-7 dIAMeTeR Wrench Size: 1-7/8"

Part # Size Pkg QtyNC1212-2B 3" 12NC1214-2B 3-1/2 12NC1216-2B 4" 12NC1218-2B 4-1/2 6NC1220-2B 5" 6NC1221-2B 5-1/2 6NC1222-2B 6" 6NC1223-2B 6-1/2 6NC1224-2B 7" 6NC1225-2B 7-1/2 6NC1226-2B 8" 6NC1227-2B 8-1/2 6NC1228-2B 9" 6NC1230-2B 10" 1NC1232-2B 11" 1NC1234-2B 12" 1

1-1/2"-6 dIAMeTeRWrench Size: 2-1/4"

Part # Size Pkg QtyNC1416-2B 4" 1NC1420-2B 5" 1NC1422-2B 6" 1NC1424-2B 7" 1NC1426-2B 8" 1NC1430-2B 10" 1NC1434-2B 12" 1


Grade 8 USS Black Hex Flange Screw Assortment


Part # Size Pkg Qty9-204 1" 259-205 1-1/4 259-206 1-1/2 259-207 1-3/4 259-208 2" 159-209 2-1/4 159-210 2-1/2 159-211 2-3/4 159-212 3" 159-213 3-1/4 159-226 3-1/2 15


Part # Size Pkg Qty9-200 1" 1009-201 1-1/4 1009-202 1-1/2 1009-203 1-3/4 100

GRAde 8 BLACK Hex FLAnGe SCReWS USSOriginally used on truck frames and for automotive body applications. Features time-saving flange design which provides more bearing surface to minimize bolt-hole preparation. Use with corresponding flange lock nuts (frame nuts).

Tensile strength: 150,000 psi. min..Material: Medium carbon 4140 steelHardness: Rockwell C33-39 Grade mark: 6 radial linesFinish: Unplated (black and oiled) Meets or exceeds SAE J429 and IFI-111


Part # Size Pkg Qty9-214 1-1/2 109-215 1-3/4 109-216 2" 109-217 2-1/4 109-218 2-1/2 109-219 2-3/4 109-220 3" 109-221 3-1/4 109-222 3-1/2 10


Part # Size Pkg Qty9-600 2" 109-601 2-1/4 109-602 2-1/2 109-603 2-3/4 10

GRAde 8 BLACK Hex FLAnGe SCReWS SAe


Part # Size Pkg Qty9-608 1" 259-609 1-1/4 259-610 1-1/2 259-611 1-3/4 259-612 2" 15


Part # Size Pkg Qty9-613 1-1/2 109-614 1-3/4 109-615 2" 109-616 2-1/4 109-617 2-1/2 109-618 2-3/4 109-619 3" 10

Part number 40-115 .............................................................................................................FLAnGe BOLT 40 SIZeS STARTeR ASSORTMenT - BLACKAlloy steel, black finish, coarse threads. Sizes 1/4-3/4 dia. thru 4" with flange lock nuts, 40 hole steel bin included.40-115-2.....STANDARD ASSORTMENT (contents doubled) 40-115R....REFILL ONLY

wE CAN CUSTOMizE ANY ASSORTMENT TO FiT YOUR NEEdS!


SOCKeT HeAd CAP SCReWS USS (1960 Series)A heat-treated alloy steel fastener manufactured in accordance with AISI and IFI standards. Close tolerance class 3A thread fit. Deep, smooth hex recess for easy wrenching. Length is measured from base of head. Thread lengths: Under 6" long, twice the diameter +1/4". Sizes 6" and longer, twice the diameter +1/2". Sizes too short for this formula are fully threaded.

Min.. Tensile Strength: 180,000 psi thru 1/2", 170,000 psi over 1/2"Material: Med carbon C1038 steel Hardness: Rockwell C37-43Finish: Black oxide coated Meets ANSI/ASME B18.3, ASTM A574

#4-40 dIAMeTeRHex Key Wrench Size: 3/32"

Part # Size Pkg Qty29-009 1/4 10029-010 3/8 10029-011 1/2 10029-012 5/8 10029-013 3/4 100


Part # Size Pkg Qty29-014 1/4 10029-015 3/8 10029-016 1/2 100


Part # Size Pkg Qty29-019 1/4 10029-020 3/8 10029-021 1/2 10029-022 5/8 10029-023 3/4 10029-024 7/8 10029-025 1" 100


Part # Size Pkg Qty29-026 1/4 10029-027 3/8 10029-028 1/2 10029-029 5/8 10029-030 3/4 10029-031 7/8 10029-032 1" 10029-033 1-1/4 10029-034 1-1/2 100


Part # Size Pkg Qty29-035 3/8 10029-036 1/2 10029-037 5/8 10029-038 3/4 10029-039 7/8 10029-040 1" 10029-041 1-1/4 10029-042 1-1/2 10029-043 1-3/4 10029-044 2" 100

1/4-20 dIAMeTeRHex Key Wrench Size: 3/16"

Part # Size Pkg Qty29-045 3/8 10029-046 1/2 10029-047 5/8 10029-048 3/4 10029-049 7/8 10029-050 1" 10029-051 1-1/4 10029-052 1-1/2 10029-053 1-3/4 10029-054 2" 10029-055 2-1/4 10029-056 2-1/2 10029-057 2-3/4 10029-58 3" 100


Part # Size Pkg Qty29-060 3/8 10029-061 1/2 10029-062 5/8 10029-063 3/4 10029-064 7/8 10029-065 1" 10029-066 1-1/4 10029-067 1-1/2 10029-068 1-3/4 100


Part # Size Pkg Qty29-069 2" 10029-070 2-1/4 10029-071 2-1/2 10029-072 2-3/4 10029-073 3" 10029-075 3-1/2 50


Part # Size Pkg Qty29-076 1/2 10029-077 5/8 10029-078 3/4 10029-079 7/8 10029-080 1" 10029-081 1-1/4 10029-082 1-1/2 10029-083 1-3/4 5029-084 2" 5029-085 2-1/4 5029-086 2-1/2 5029-087 2-3/4 5029-088 3" 5029-090 3-1/2 5029-091 4" 5029-092 5" 50


Part # Size Pkg Qty29-094 1/2 10029-096 3/4 10029-098 1" 10029-099 1-1/4 5029-100 1-1/2 5029-101 1-3/4 5029-102 2" 5029-104 2-1/2 5029-106 3" 50


Part # Size Pkg Qty29-112 3/4 5029-114 1" 5029-115 1-1/4 5029-116 1-1/2 5029-117 1-3/4 5029-118 2" 5029-119 2-1/4 2529-120 2-1/2 2529-121 2-3/4 2529-122 3" 2529-124 3-1/2 25


SOCKeT HeAd CAP SCReWS USS & SAe (1960 Series)


Part # Size Pkg Qty29-152 1-1/4 2529-153 1-1/2 2529-154 1-3/4 2529-155 2" 2529-157 2-1/2 2529-158 2-3/4 2529-159 3" 2529-161 3-1/2 2529-162 4" 2529-163 4-1/2 2529-164 5" 2529-165 5-1/2 1029-166 6" 1029-167 6-1/2 10


Part # Size Pkg Qty29-125 4" 2529-126 4-1/2 2529-127 5" 2529-128 5-1/2 2529-129 6" 2529-130 6-1/2 1029-131 7" 1029-132 8" 10


Part # Size Pkg Qty29-133 1" 2529-134 1-1/4 2529-135 1-1/2 2529-136 1-3/4 2529-137 2" 2529-138 2-1/4 2529-139 2-1/2 2529-140 2-3/4 2529-141 3" 2529-142 3-1/4 2529-143 3-1/2 2529-144 4" 2529-145 4-1/2 2529-146 5" 2529-147 5-1/2 1029-148 6" 1029-149 6-1/2 1029-150 7" 1029-151 8" 10

USS(COnTInUed)


Part # Size Pkg Qty28-009 3/8 10028-010 1/2 10028-011 5/8 10028-012 3/4 10028-014 1" 10028-015 1-1/4 10028-016 1-1/2 10028-017 1-3/4 10028-018 2" 100


Part # Size Pkg Qty28-019 3/8 10028-020 1/2 10028-021 5/8 10028-022 3/4 10028-023 7/8 10028-024 1" 10028-025 1-1/4 10028-026 1-1/2 10028-027 1-3/4 10028-028 2" 10028-029 2-1/4 100


Part # Size Pkg Qty28-030 1/2 10028-031 5/8 10028-032 3/4 10028-044 1" 10028-035 1-1/4 10028-066 1-1/2 10028-037 1-3/4 10028-038 2" 10028-048 2-1/2 100


Part # Size Pkg Qty28-043 3/4 10028-045 1" 10028-046 1-1/4 10028-047 1-1/2 10028-048 1-3/4 5028-049 2" 50


Part # Size Pkg Qty28-053 1" 10028-055 1-1/2 50


Part # Size Pkg Qty28-057 1" 5028-058 1-1/4 5028-059 1-1/2 5028-061 2" 5028-063 2-1/2 2528-064 3" 25


Part # Size Pkg Qty28-135 1-1/2 2528-137 2" 2528-139 2-1/2 25

SAe SAe

24 sizes, 1/4" - 1/2" diameter coarse thread, up to 2-1/2" 16-0424 Starter asst 24 bin16-0424-32 Starter asst 32 bin16-0424-2 Standard asst doubled16-0424R Refill only

Socket Head Cap Screw Assortment


FLAT HeAd SOCKeT CAP SCReWS USS & SAeA heat-treated alloy steel screw with 82° countersink. Manufactured in accordance with AISI and IFI standards. Close tolerance class 3A thread fit. Deep, smooth hex recess for easy wrenching. Length is measured from top of head (overall length). Thread length is twice the diameter +1/4". Sizes too short for this formula are fully threaded.

Min. Tensile Strength: 180,000p.s.i.Hardness: Rockwell C38-44Material: Med carbon C1038 steelMeets ANSI/ASME B18.3, ASTM F835Finish: Black oxide coated Countersink: 82°


Part # Size Pkg Qty29-237 1/4 10029-238 3/8 10029-239 1/2 10029-240 5/8 10029-241 3/4 100


Part # Size Pkg Qty29-242 3/8 10029-243 1/2 10029-244 5/8 10029-245 3/4 10029-246 1" 100


Part # Size Pkg Qty29-247 3/8 10029-248 1/2 10029-249 5/8 10029-250 3/4 10029-251 1" 10029-252 1-1/4 10029-253 1-1/2 100


Part # Size Pkg Qty29-257 3/4 10029-258 1" 10029-259 1-1/4 10029-260 1-1/2 10029-261 1-3/4 10029-262 2" 100


Part # Size Pkg Qty29-263 1/2 10029-264 5/8 10029-265 3/4 10029-266 1" 10029-267 1-1/4 10029-268 1-1/2 10029-269 1-3/4 10029-270 2" 10029-272 2-1/2 100


Part # Size Pkg Qty29-275 3/4 10029-276 1" 10029-277 1-1/4 10029-278 1-1/2 10029-280 2" 5029-282 2-1/2 5029-283 3" 50


Part # Size Pkg Qty29-284 3/4 10029-285 1" 10029-286 1-1/4 5029-287 1-1/2 5029-288 1-3/4 5029-289 2" 50


Part # Size Pkg Qty29-290 3/4 5029-291 1 5029-292 1-1/4 5029-293 1-1/2 5029-294 1-3/4 5029-295 2" 5029-296 2-1/4 2529-297 2-1/2 2529-298 3" 25


Part # Size Pkg Qty29-306 1-1/4 2529-307 1-1/2 2529-308 1-3/4 2529-309 2" 2529-311 2-1/2 2529-312 3" 25


Part # Size Pkg Qty29-299 1-1/4 2529-300 1-1/2 2529-301 1-3/4 2529-302 2" 2529-303 2-1/4 2529-304 2-1/2 2529-305 3-1/4 25


Part # Size Pkg Qty29-254 3/8 10029-255 1/2 10029-256 5/8 100


Part # Size Pkg Qty28-071 3/8 10028-072 1/2 10028-073 5/8 10028-074 3/4 10028-075 1" 10028-076 1-1/4 10028-077 1-1/2 100


Part # Size Pkg Qty28-078 3/8 10028-079 1/2 10028-080 5/8 10028-081 3/4 10028-082 1" 10028-083 1-1/4 10028-084 1-1/2 100


Part # Size Pkg Qty28-085 1/2 10028-086 5/8 10028-087 3/4 10028-088 1" 10028-089 1-1/4 100

USSSAe


A heat-treated alloy steel screw made in accordance with AISI and IFI standards. Button heads are used where a wider bearing surface or low profile head is required. Close tolerance class 3A thread fit. Deep, smooth hex recess for easy wrenching. Length is measured from base of head. Thread length is twice the diameter +1/4". Sizes too short for this formula are fully threaded.

Min.. Tensile Strength: 180,000 psi Hardness: Rockwell C38-44Material: Medium carbon C1038 steel Meets ANSI/ASME B18.3, ASTM F835Finish: Black oxide coated


Part # Size Pkg Qty28-090 5/8 10028-091 3/4 10028-092 1" 10028-093 1-1/4 10028-094 1-1/2 100


Part # Size Pkg Qty28-095 3/4 5028-096 1" 5028-097 1-1/4 5028-098 1-1/2 5028-100 2" 50

FLAT HeAd SAe(COnTInUed)

#4-40 dIAMeTeR USSHex Key Wrench Size: 1/16"

Part # Size Pkg Qty28-101 1/4 10028-102 3/8 10028-103 1/2 100

1/4-20 dIAMeTeR USSHex Key Wrench Size: 5/32"

Part # Size Pkg Qty28-120 3/8 10028-121 1/2 10028-122 5/8 10028-123 3/4 10028-124 7/8 10028-125 1" 100


Part # Size Pkg Qty28-138 1" 5028-139 1-1/4 5028-140 1-1/2 5028-141 2" 50

5/8-11 dIAMeTeR SAeHex Key Wrench Size: 3/8"

Part # Size Pkg Qty28-144 1-1/2 2528-145 2" 25Flat Socket Head Cap

Screw Assortment

24 sizes, 1/4" - 1/2" dia. coarse thrd., up to 2-1/2"

16-0524 Starter asst 24 bin16-0524-32 Starter asst 32 bin16-0524-2 Standard asst doubled16-0524R Refill only

SOCKeT CAP SCReWS


Part # Size Pkg Qty28-113 1/4 10028-114 3/8 10028-115 1/2 10028-116 5/8 10028-117 3/4 10028-118 7/8 10028-119 1" 100


Part # Size Pkg Qty28-104 1/4 10028-105 3/8 10028-106 1/2 10028-107 5/8 100


Part # Size Pkg Qty28-132 1/2 10028-133 5/8 10028-134 3/4 10028-135 7/8 10028-136 1" 10028-137 1-1/4 100


Part # Size Pkg Qty28-108 1/4 10028-109 3/8 10028-110 1/2 10028-111 5/8 10028-112 3/4 100


Part # Size Pkg Qty28-153 3/8 10028-154 1/2 10028-155 5/8 10028-156 3/4 10028-157 1" 100


Part # Size Pkg Qty28-158 3/8 10028-159 1/2 10028-160 5/8 10028-161 3/4 10028-162 1" 100

#10-32 dIAMeTeR SAeHex Key Wrench Size: 5/32"

Part # Size Pkg Qty28-146 1/4 10028-147 3/8 10028-148 1/2 10028-149 5/8 10028-150 3/4 10028-151 7/8 10028-152 1" 100

BUTTOn HeAd SOCKeT CAP SCReWS


Part # Size Pkg Qty28-163 1/2 10028-164 1" 100


Part # Size Pkg Qty28-126 3/8 10028-127 1/2 10028-128 5/8 10028-129 3/4 10028-130 7/8 10028-131 1" 100

BUTTOn HeAd


Length is measured from under flange.

For more product information, see page 12.

7/16"-14 dIAMeTeR21/32" FLANGE DIAMETER

Part # Size Pkg Qty28-918 1-1/4 5028-919 1-1/2 5028-920 2" 5028-921 2-1/2 50

1/2"-13 dIAMeTeR 3/4" FLANGE DIAMETER

Part # Size Pkg Qty28-922 1" 5028-923 1-1/2 5028-924 2" 5028-925 2-1/2 2528-926 3" 25


Part # Size Pkg Qty28-927 1-1/2 2528-928 2" 2528-929 2-1/2 2528-930 3" 25

3/4"-10 dIAMeTeRPart # Size Pkg Qty28-863 1" 2528-865 1-1/2 2528-867 2" 2528-871 3" 25

Also known as high torque cap screws, flange screws and starter bolts. 12-point flange screws can be used to replace socket head cap screws, eliminating the need for hex key wrenches. Drive by using a 12-point socket or wrench of the same size as screw diameter. Use with high-collar lock washers. Made in accordance with AISI and IFI standards. Close tolerance class 3A thread fit. Length is measured from under base of flange. Thread length is twice the diameter +1/4". Sizes too short for this formula are fully threaded.Min.. Tensile Strength: 170,000 psi Hardness: Rockwell C37-43Material: Medium carbon C1038 alloy steel Meets ANSI/ASME B18.3, ASTM F835Finish: Black oxide coated

1/4"-24 dIAMeTeRPart # Size Pkg Qty28-789 3/4 10028-790 1" 10028-791 1-1/4 10028-792 1-1/2 10028-794 2" 10028-795 2-1/2 100

5/16"-18 dIAMeTeRPart # Size Pkg Qty28-800 3/4 10028-801 1" 10028-803 1-1/2 10028-805 2" 10028-806 2-1/2 100

7/16"-14 dIAMeTeRPart # Size Pkg Qty28-820 3/4 10028-821 1" 10028-822 1-1/4 5028-823 1-1/2 5028-825 2" 5028-827 3" 50

1/2"-13 dIAMeTeRPart # Size Pkg Qty28-828 5/8 5028-829 3/4 5028-830 1" 5028-831 1-1/4 5028-832 1-1/2 5028-834 2" 5028-838 3" 2528-840 4" 2528-842 5" 25

5/8"-11 dIAMeTeRPart # Size Pkg Qty28-847 1" 2528-848 1-1/4 2528-849 1-1/2 2528-851 2" 2528-853 2-1/2 2528-855 3" 2528-857 4" 2528-860 6" 10

1/4"-20 dIAMeTeR3/8" FLANGE DIAMETER

Part # Size Pkg Qty28-900 1/2 10028-901 3/4 10028-902 1" 10028-903 1-1/2 10028-904 2" 10028-905 2-1/2 50


Part # Size Pkg Qty28-906 1/2 10028-907 3/4 10028-908 1" 10028-909 1-1/2 10028-910 2" 10028-911 2-1/2 100


Part # Size Pkg Qty28-912 3/4 10028-913 1" 10028-914 1-1/4 10028-915 1-1/2 10028-916 2" 5028-917 2-1/2 50

12PT COUnTeRBORe SCReWS

SQUARe HeAd SeT SCReWS

Square head set screws are case hardened fully threaded screws commonly used as a quick adjusting screw or locking screw on a shaft. Also available in alloy steel. Class 2B thread fit. Length is measured from under head. Fully threaded.

Min.. Tensile Strength: 120,000 psi Hardness: n/aMaterial: Low carbon steel (case hardened) Meets ANSI/ASME B18.6.2Finish: plain, uncoated Point style: Cup

3/8"-16 dIAMeTeRPart # Size Pkg Qty28-808 1/2 10028-809 5/8 10028-810 3/4 10028-811 1" 10028-812 1-1/4 10028-813 1-1/2 10028-814 1-3/4 5028-815 2" 5028-816 2-1/2 50

SOCKeT SCReW PROdUCTS


Socket set screws are heat-treated alloy steel screws made in accordance with AISI and IFI standards. Currently stocked in cup point (most used), half-dog point (permanent setting) or knurled point (extra holding power). Many other point styles are available on request. Class 2B thread fit. Deep, smooth hex recess for easy wrenching. Length is measured from under head. Fully threaded.

Min.. Tensile Strength: 245,000 psi Hardness: Rockwell C43-53Material: Medium carbon C1038 alloy steel Meets ANSI/ASME B18.6.2Finish: Black oxide coated Point styles: Cup, half-dog or knurled

CUP POInT SOCKeT SeT SCReWS USS

#8-32 dIAMeTeR Hex Key Wrench Size: 5/64"

Part # Size Pkg Qty28-277 1/8 10028-278 3/16 10028-279 1/4 10028-280 5/16 10028-281 3/8 10028-283 1/2 10028-285 3/4 100 28-287 1" 100


Part # Size Pkg Qty28-266 1/8 10028-267 3/16 10028-268 1/4 10028-269 5/16 10028-270 3/8 10028-272 1/2 10028-274 3/4 10028-276 1" 100


Part # Size Pkg Qty28-288 3/16 10028-289 1/4 10028-290 5/16 10028-291 3/8 10028-293 1/2 10028-295 3/4 100 28-297 1" 100

1/4-20 dIAMeTeR Hex Key Wrench Size: 1/8"

Part # Size Pkg Qty28-299 3/16 10028-300 1/4 10028-301 5/16 10028-302 3/8 10028-303 7/16 10028-304 1/2 100 28-305 5/8 10028-306 3/4 10028-307 7/8 10028-308 1" 10028-309 1-1/4 100


Part # Size Pkg Qty28-313 1/4 10028-314 5/16 10028-315 3/8 10028-317 1/2 10028-318 5/8 100 28-319 3/4 10028-321 1" 10028-322 1-1/4 10028-323 1-1/2 100


Part # Size Pkg Qty28-326 1/4 10028-328 3/8 10028-330 1/2 10028-331 5/8 10028-332 3/4 100 28-334 1" 10028-335 1-1/4 10028-336 1-1/2 10028-337 1-3/4 10028-338 2" 100


Part # Size Pkg Qty28-341 7/16 10028-342 1/2 10028-344 3/4 10028-346 1" 10028-347 1-1/4 5028-349 1-1/2 50


Part # Size Pkg Qty28-352 3/8 5028-353 7/16 5028-354 1/2 50 28-355 5/8 5028-356 3/4 5028-357 7/8 5028-358 1" 5028-359 1-1/4 5028-360 1-1/2 5028-362 2" 5028-363 2-1/2 2528-364 3" 25


Part # Size Pkg Qty28-366 5/8 2528-367 3/4 2528-368 1" 2528-369 1-1/4 2528-370 1-1/2 2528-372 2" 2528-373 2-1/2 2528-374 3" 25


Part # Size Pkg Qty28-375 5/8 2528-376 3/4 2528-377 1" 2528-378 1-1/4 2528-379 1-1/2 25

MK506CUP POInT KIT 18 SIzES, 6/32 - 3/8" DIA. COARSE & FINE THREADS, IN A CLEAR POLY-STYRENE BOX.

Set Screw Assortments

CUP POINT 24 SIzES, 6/32 - 5/8"IN A LARGE STEEL DRAWER. 16-0624...STARTeR ASST16-0624-32...STARTeR ASST16-0624-2...STAndARd ASST16-0624R...ReFILL OnLy

SOCKeT SeT SCReWS


#10-32 Hex Key Wrench Size: 3/32"

Part # Size Pkg Qty28-413 3/16 10028-414 1/4 10028-415 5/16 10028-416 3/8 10028-418 1/2 10028-420 3/4 100 28-421 1" 100

1/4-28 Hex Key Wrench Size: 1/8"

Part # Size Pkg Qty28-424 1/4 10028-425 5/16 10028-426 3/8 10028-427 7/16 10028-428 1/2 100 28-430 3/4 100


Part # Size Pkg Qty28-433 1/4 10028-434 5/16 10028-435 3/8 10028-437 1/2 10028-438 5/8 100 28-439 3/4 10028-440 1" 100


Part # Size Pkg Qty28-441 1/4 10028-443 3/8 10028-445 1/2 10028-446 5/8 10028-447 3/4 100 28-448 1" 100


Part # Size Pkg Qty28-409 1/4 10028-411 3/8 100


Part # Size Pkg Qty28-403 3/16 10028-404 1/4 10028-406 3/8 100

CUP POInT SAe

SOCKeT SeT SCReWS

Heat treated alloy steel. 160,000 PSI min.. tensile strength. Plain finish.

1/4" SHOULdeR Hex Key Wrench Size: 1/8"

Thread: 10-24, 3/8 longPart # Size Pkg Qty28-165 3/8 2528-166 1/2 2528-167 5/8 2528-168 3/4 2528-169 1" 25 28-170 1-1/4 2528-171 1-1/2 25


Thread: 1/4-20, 7/16 longPart # Size Pkg Qty28-172 3/8 2528-173 1/2 2528-174 5/8 2528-175 3/4 2528-176 1" 2528-177 1-1/4 2528-178 1-1/2 2528-179 1-3/4 2528-180 2" 25


Thread: 5/16-18, 1/2 longPart # Size Pkg Qty28-181 3/8 2528-182 1/2 2528-183 5/8 2528-184 3/4 2528-185 1" 2528-186 1-1/4 2528-187 1-1/2 2528-188 1-3/4 2528-189 2" 2528-191 2-1/2 2528-192 2-3/4 2528-193 3" 25


Thread: 3/8-16, 5/8 longPart # Size Pkg Qty28-197 1/2 2528-198 5/8 2528-199 3/4 2528-200 1" 2528-201 1-1/4 2528-202 1-1/2 2528-203 1-3/4 25


Thread: 1/2-13, 3/4 longPart # Size Pkg Qty28-214 1-1/4 2528-215 1-1/2 2528-216 1-3/4 2528-217 2" 2528-218 2-1/4 2528-219 2-1/2 2528-220 2-3/4 2528-221 3" 2528-223 3-1/2 2528-224 4" 1028-225 4-1/2 10

Socket Shoulder Screws(Stripper Bolts)

SHOULDER

LENGTH

SHOULDER DIA.

THREAD LENGTHSHOULDER

LENGTH

SHOULDER DIA.

THREAD LENGTHSHOULDER

LENGTH

THREAD LENGTH


Carriage BoltsGRAde 2

The square neck keeps screw from turning when you tighten or loosen the nut. Use for wood-to-wood and wood-to-metal fastening. Length is measured from base of head. Thread length: Up to 7/16" dia. fully threaded; over 6" long are 2 x dia. +¼".

Min.. Tensile Strength: 60,000 psiMaterial: AISI 1006/1050 low carbon steelFinish: Blue chromate dipped (up to 1" dia, 6" lg.)Core Hardness: Rockwell B70-100Grade mark: none Meets ANSI/ASME B18.5

#10-24Part # Size Pkg QtyNC002-5 3/4 100 NC004-5 1" 100NC005-5 1-1/4 100NC006-5 1-1/2 100NC007-5 1-3/4 100NC008-5 2" 100

1/4-20Part # Size Pkg QtyNC102-5 3/4 100NC104-5 1" 100NC105-5 1-1/4 100NC106-5 1-1/2 100NC107-5 1-3/4 100NC108-5 2" 100NC109-5 2-1/4 100NC110-5 2-1/2 100NC111-5 2-3/4 50NC112-5 3" 50NC114-5 3-1/2 50NC116-5 4" 50NC118-5 4-1/2 50NC120-5 5" 50NC121-5 5-1/2 50NC122-5 6" 50NC124-5 7" 50NC126-5 8" 50

5/16"-18Part # Size Pkg QtyNC202-5 3/4 100NC204-5 1" 100NC205-5 1-1/4 100NC206-5 1-1/2 100NC207-5 1-3/4 100NC208-5 2" 100NC209-5 2-1/4 100NC210-5 2-1/2 100NC211-5 2-3/4 100NC212-5 3" 100NC214-5 3-1/2 50NC216-5 4" 50NC218-5 4-1/2 50NC220-5 5" 50NC221-5 5-1/2 50NC222-5 6" 50NC224-5 7" 50NC226-5 8" 50

3/8"-16Part # Size Pkg QtyNC302-5 3/4 100NC304-5 1" 100NC305-5 1-1/4 100NC306-5 1-1/2 100NC307-5 1-3/4 100NC308-5 2" 100NC309-5 2-1/4 100NC310-5 2-1/2 50NC311-5 2-3/4 50NC312-5 3" 50NC314-5 3-1/2 50NC316-5 4" 50NC318-5 4-1/2 50NC320-5 5" 50NC321-5 5-1/2 50NC322-5 6" 50NC324-5 7" 50NC326-5 8" 50

7/16"-14Part # Size Pkg QtyNC404-5 1" 50NC405-5 1-1/4 50NC406-5 1-1/2 50NC407-5 1-3/4 50NC408-5 2" 50NC409-5 2-1/4 50NC410-5 2-1/2 50NC412-5 3" 50

1/2"-13Part # Size Pkg QtyNC506-5 1-1/2 50NC507-5 1-3/4 50NC508-5 2" 50NC509-5 2-1/4 50NC510-5 2-1/2 50NC511-5 2-3/4 50NC512-5 3" 50NC514-5 3-1/2 25NC516-5 4" 25NC518-5 4-1/2 25NC520-5 5" 25NC522-5 6" 25NC524-5 7" 25NC526-5 8" 25

5/8"-11Part # Size Pkg QtyNC706-5 1-1/2 25NC708-5 2" 25NC710-5 2-1/2 25NC712-5 3" 25NC714-5 3-1/2 25NC716-5 4" 25NC718-5 4-1/2 25NC720-5 5" 25NC722-5 6" 25NC724-5 7" 25NC726-5 8" 25

3/4"-10Part # Size Pkg QtyNC812-5 3" 20NC814-5 3-1/2 20NC816-5 4" 20NC818-5 4-1/2 20NC820-5 5" 20NC822-5 6" 20NC824-5 7" 20NC826-5 8" 20


Carriage & elevator BoltsGRAde 5

Same design advantages as grade 2 carriage bolt but with significantly greater load carrying capacity. Use where strength and durability is a concern. Use for metal-to-metal and wood-to-metal fastening. Length is measured from base of head. Thread length: Up to 7/16 dia., 2 x dia. +¼": 1/2" dia. and over are fully threaded. Heat treatment: quenched and tempered to 800°F.

Min.. Tensile Strength: 120,000 psiMaterial: AISI 1030/1050 medium carbon steelFinish: Unplated (black and oiled) Core Hardness: Rockwell C25-34Grade mark: 3 radial lines Meets ANSI/ASME B18.5, SAE J429

1/4-20Part # Size Pkg Qty32-274 3/4 10032-275 1" 10032-276 1-1/4 10032-277 1-1/2 10032-278 2" 100

5/16"-18Part # Size Pkg Qty32-279 3/4 10032-280 1" 10032-281 1-1/4 10032-282 1-1/2 10032-283 1-3/4 10032-284 2" 10032-285 2-1/2 10032-286 3" 100

3/8"-16Part # Size Pkg Qty32-287 3/4 10032-288 1" 10032-289 1-1/4 10032-290 1-1/2 10032-291 1-3/4 10032-292 2" 10032-293 2-1/2 5032-294 3" 5032-295 3-1/2 5032-296 4" 50

7/16"-14Part # Size Pkg Qty32-297 1-1/2 5032-298 2" 5032-299 2-1/2 50

1/2"-13Part # Size Pkg Qty32-300 1-1/2 5032-301 2" 5032-302 2-1/2 5032-303 3" 5032-304 3-1/2 2532-305 4" 2532-306 4-1/2 2532-307 5" 2532-308 6" 2532-309 7" 25

5/8"-11Part # Size Pkg Qty32-311 2" 2532-312 2-1/2 2532-313 3" 2532-314 3-1/2 2532-315 4" 2532-316 4-1/2 2532-317 5" 2532-318 6" 25

3/4"-10Part # Size Pkg Qty32-319 3" 2032-320 3-1/2 2032-321 4" 2032-322 4-1/2 2032-323 5" 2032-324 6" 20

eLeVATOR BOLTS (nO. 1 nORWAy

HeAd) Also known as belt bolts, elevator bolts have a wide, countersunk flat head with a shallow bearing surface. Primarily used on conveyors and elevators, but used anywhere head clearance must be kept to a minimum. Length is measured from top of head. Thread length is 2 x dia. +¼".

Min.. Tensile Strength: 54,000 psi Material: AISI 1006/1050 low carbon steelFinish: zinc plated Core Hardness: Rockwell B70-100Grade mark: none Meets IFI standards.

1/4-20Part # Size Pkg Qty32-200 3/4 10032-201 1" 10032-202 1-1/4 10032-203 1-1/2 10032-204 1-3/4 10032-205 2" 100

5/16"-18Part # Size Pkg Qty32-207 1" 10032-208 1-1/4 10032-209 1-1/2 10032-210 1-3/4 10032-211 2" 10032-212 2-1/2 100

3/8"-16Part # Size Pkg Qty32-214 1" 10032-215 1-1/4 10032-216 1-1/2 10032-217 1-3/4 10032-218 2" 10032-219 2-1/2 50


Plow BoltsGRAde 5

(nO. 3 FLAT HeAd) Also know as scraper or blade bolts, these square shank bolts are commonly used on scrapers, dozers, road graders, snow plows and many farm implements. Length is measured from top of head. Thread length is 2 x dia. +¼". Heat treatment: quenched and tempered to 800°F.

Min.. Tensile Strength: 120,000 psiMaterial: AISI 1030/1050 med. carbon steel Finish: Unplated Core Hardness: Rockwell C25-34Grade mark: 3 radial lines Meets ANSI B18.9, SAE J429

3/8-16Part # Size Pkg Qty18-800 1" 10018-801 1-1/4 10018-802 1-1/2 10018-803 2" 10018-805 2-1/2 5018-806 2-3/4 50

7/16-14Part # Size Pkg Qty18-807 1-1/4 5018-808 1-1/2 5018-809 1-3/4 5018-810 2" 5018-811 2-1/4 5018-812 2-1/2 5018-813 2-3/4 5018-814 3" 50

1/2"-13Part # Size Pkg Qty18-817 1-1/4 5018-818 1-1/2 5018-819 1-3/4 5018-820 2" 5018-821 2-1/4 5018-822 2-1/2 5018-823 2-3/4 5018-824 3" 5018-825 3-1/2 2518-826 4" 25

5/8"-11Part # Size Pkg Qty18-900 2" 2518-901 2-1/4 2518-902 2-1/2 2518-903 2-3/4 2518-904 3" 2518-905 3-1/2 2518-906 4" 2518-907 4-1/2 2518-908 5" 2518-909 5-1/2 2518-910 6" 25

3/4"-10Part # Size Pkg Qty18-911 2" 2018-913 2-1/2 2018-914 2-3/4 2018-915 3" 2018-916 3-1/2 2018-917 4" 2018-918 4-1/2 2018-919 5" 20

GRAde 8(nO. 3 dOMe HeAd)

Similar to a grade 5 plow bolt, but features a dome head providing extra metal at the wearing surface. Grade 8 alloy steel higher tensile strength. Length is measured from top of head. Thread length is 2 x dia. +¼". Heat treatment: quenched and tempered to 800°F.

Min.. Tensile Strength: 150,000 psiMaterial: AISI 4037/4042 alloy steel Finish: Unplated Core Hardness: Rockwell C33-39Grade mark: 6 radial lines Meets ANSI B18.9, SAE J429

For use in wood fastening in non-corrosive environments. Made from AISI 1006/1022 low carbon steel. Thread length: half of screw length +½" or 5", whichever is shorter. zinc finish†.

1/4" diameter (7/16" Wrench)Part # Size Pkg Qty18-700 1" 10018-701 1-1/4 10018-702 1-1/2 10018-703 2" 10018-704 2-1/2 10018-705 3" 5018-706 3-1/2 5018-707 4" 5018-708 4-1/2 5018-709 5" 2518-710 6" 25

5/16" diameter (1/2" Wrench)18-711 1" 10018-712 1-1/4 10018-713 1-1/2 10018-714 2" 10018-715 2-1/2 5018-716 3" 5018-717 3-1/2 5018-718 4" 5018-719 4-1/2 5018-720 5" 2518-721 6" 25

3/8" diameter (9/16" Wrench)18-722 1 10018-723 1-1/4 10018-724 1-1/2 10018-725 2 10018-726 2-1/2 5018-727 3 5018-728 3-1/2 2518-729 4 2518-730 4-1/2 2518-731 5 2518-732 6 2518-733 8 25

1/2" diameter (3/4" Wrench)18-736 2" 5018-738 3" 2518-740 4" 2518-742 5" 2518-744 6" 2518-746 8" 25

Hex Lag Screws


Formed Wire eyebolts with Hex Nuts

General purpose, closed-eye type eye-bolts are used for hanging fixtures and anchoring light loads. Bent wire is formed from low carbon steel, machine threaded. All coarse thread (NC). zinc finish. PKG: 10 eACH

(A) (B) (C) (T) (d)Part Thread O.A. Shank Thread I.d.number diam. Length Length Length eye18-500 8-32 1-5/8 1-1/8 1" 1/418-503 10-24 2-1/2 1-5/8 1-1/2 1/218-504 10-24 3" 2-1/4 2" 1/218-507 1/4-20 2-5/8 1-7/8 1-1/2 3/818-509 1/4-20 4" 3" 2" 9/1618-514 1/4-20 8" 6-3/4 2-7/8 9/1618-515 5/16-18 3-1/4 2-1/4 1-7/8 1/218-516 5/16-18 4" 2-5/8 2" 3/418-517 5/16-18 5" 3-5/8 2-7/8 3/418-522 3/8-16 6" 4-1/4 3-7/8 1"18-528 1/2-13 6" 4" 2-1/2 1-1/418-529 1/2-13 8" 5-3/4 3-7/8 1-1/418-530 1/2-13 10" 7-3/4 3-7/8 1-1/418-531 1/2-13 12" 9-3/4 3-7/8 1-1/4

B

d

CT

A

(A) (B) (T)Part Wire Approx. Overall Thread Pkgnumber diam. diam. Length Length Qty18-554 .080 #2 1-1/4 1/2 10018-555 .105 #5 1-5/8 1/2 10018-556 .135 #8 2" 5/8 10018-557 .162 #10 2-1/2 7/8 10018-559 .225 #16 3-7/8 1-1/4 50

Screw Hooks Low carbon steel. zinc plated.

Wedge anchors are used for heavy duty fastening to concrete, brick or stone. Fastens steel plates and angles, wood studs , pipe supports, elevator equip-ment, conveyors, signs, hand rails, machinery and more. Full bodied diameter provides maximum bolt strength and prevents "wobbling" of the anchor in the hole. ASTM A108, A510. zinc plated low carbon steel2 or T303 stainless steel. Shipped unassembled.

nOTe: BOLT SIZe IS HOLe SIZe1. Drill hole at depth of 4½ times anchor diameter.

2. Insert anchor 3. Tighten nut.

Part dia x 4000 PSI Pkgnumber Length Concrete Qty23-216 1/4 x 1-3/4 1,170 10023-217 1/4 x 2-1/4 1,170 10023-218 1/4 x 3-1/4 1,170 10023-219 3/8 x 2-1/4 5,150 5023-220 3/8 x 2-3/4 5,150 5023-221 3/8 x 3 5,150 5023-222 3/8 x 3-3/4 5,150 5023-223 3/8 x 5 5,150 5023-225 1/2 x 3-3/4 7,450 2523-226 1/2 x 4-1/4 7,450 2523-227 1/2 x 5-1/2 7,450 2523-228 1/2 x 7 7,450 2523-229 5/8 x 3-1/2 8,670 1023-230 5/8 x 4-1/2 8,670 1023-231 5/8 x 5 8,670 1023-232 5/8 x 6 8,670 1023-233 5/8 x 7 8,670 1023-235 3/4 x 4-3/4 12,300 1023-236 3/4 x 5-1/2 12,300 1023-237 3/4 x 7 12,300 1023-238 3/4 x 8-1/2 12,300 1023-239 3/4 x 10 12,300 523-240 1 x 6 27,250 523-241 1 x 9 27,250 523-242 1 x 12 27,500 5

T303 STAiNLESS STEEL!

23-037 3/8 x 2-1/4 5,150 5023-038 3/8 x 3 5,150 5023-040 3/8 x 5 5,150 5023-042 1/2 x 3-3/4 7,450 2523-056 5/8 x 3-1/2 8,670 10

Wedge Anchors(Stud Anchors)

1 Pullout strength is approximate standard test values and is base on type of material listed. Values for other

materials available on request. Safe working load limit should not exceed 25% of these stated values.


WeJ-IT® Wedge Anchors

Time-tested and proven reliable. Patented wedge ac-tion provides highest strength values available. Unique design eliminates anchor rotation, minimizes loosen-ing due to vibration. Made from high strength cold rolled steel3. zinc plated and acetate coated. Meets ASTM-117 salt spray test. Meets OSHA 1910.212(B). Shipped assembled and ready-to-use.

nOTe: BOLT SIZe IS HOLe SIZe 1. Drill hole. 2. Insert anchor. 3. Tighten nut.

PulloutPart O.A. 5000 PSI Pkgnumber Length Concrete1 Qty

1/4" diameter (1" min..embedment)23-000 1-3/4 1,760 10023-001 2-3/4 1,760 10023-002 3" 1,760 100

5/16" diameter (1-1/4 min. embedment)23-004 2" 2,742 10023-005 3" 2,742 100

3/8" diameter (1-1/2 min. embedment)23-006 2" 3,834 10023-007 2-3/4 3,834 10023-008 3-1/2 3,834 5023-009 5" 3,834 50

1/2" diameter (2" min. embedment)23-011 2-3/4 5,789 5023-012 3-1/2 5,789 5023-013 5" 5,789 2523-014 6" 5,789 25

5/8" diameter (3" min. embedment)23-016 3-1/2 12,636 2523-019 6" 12,636 15

3/4" diameter 23-022 5" 19,299 1223-024 7" 19,299 10

1 Pullout strength is approximate standard test values and is base on type of material listed. Values for other

materials available on request. Safe working load limit should not exceed 25% of these stated values.

One FRee dRILL InCLUded WITH eACH PACKAGe OF 100 COnCReTe SCReWS

Part Anchor Pkg drillnumber Size Qty Used23-256 3/16 x 1-1/4 100 23-28823-257 3/16 x 1-3/4 100 23-28823-258 3/16 x 2-1/4 100 23-28223-259 3/16 x 2-3/4 100 23-28223-260 3/16 x 3-1/4 100 23-28423-261 3/16 x 4" 100 23-28423-262 1/4 x 1-1/4 100 23-28723-263 1/4 x 1-3/4 100 23-28723-264 1/4 x 2-1/4 100 23-28523-265 1/4 x 2-3/4 100 23-28523-266 1/4 x 3-1/4 100 23-28623-267 1/4 x 4" 100 23-286

1Not affiliated with Tap-Con®, a registered trademark of the ITW Buildex Corp. 2Warning: A substitution of supplied drills could result in fastening failure. Only use concrete screw drills with this product. 3Concrete screws must be fastened within 1/2" of a slab edge. Ultimate load values available on request.

Concrete ScrewsTap-ConTM Style1

Flat Head

Concrete screws provides fast, secure anchoring, utilizing a hardened screw with specially designed high-low threads which cut into a properly sized hole and thread into concrete, masonry, brick, block, stone, etc. Installation requires use of specially designed carbide drills2, and becomes an even faster operation when used with the concrete screw installation tool (23-281). This system eliminates the need for plastic anchors and lead anchors in medium and light duty ap-plications. Removable and reusable. Can be removed without excessive damage to surrounding surfaces3. No layout or hole spotting required. Made from case hardened steel. Corrosion resistant finish. Color: blue.

Hex Head

Part Anchor Pkg drillnumber Size Qty Used23-268 3/16 x 1-1/4 100 23-28823-269 3/16 x 1-3/4 100 23-28823-270 3/16 x 2-1/4 100 23-28223-271 3/16 x 2-3/4 100 23-28223-272 3/16 x 3-1/4 100 23-28423-273 3/16 x 4" 100 23-28423-274 1/4 x 1-1/4 100 23-28723-275 1/4 x 1-3/4 100 23-28723-276 1/4 x 2-1/4 100 23-28523-277 1/4 x 2-3/4 100 23-28523-278 1/4 x 3-1/4 100 23-286


Concrete Screw Installation Tool Kit

For any brand of concrete screw. Includes tool to drill and install hex head and phillips head concrete screws. Works equally well with hammer drills or standard twist. Plastic storage case and installation instructions includ-ed. Fully guaranteed for one year. (Drills not included.) Part number 23-281

Drill Holder and Hex Key

Magnetic Hex Insert Bits for 3/16" and

1/4" Screws

Hammer drive Anchors

The body of the hammer drive anchor is made from high grade zamac 3, a zinc alloy which provides high pullout values and rust resistance. zamac 3 is also resistant to embrittlement which frequently occurs in lower grades of zinc alloys. Use in concrete, brick, block, and stone. Hammer drive anchors have a tamperproof mushroom (truss) head. Meets ASTM E-488-90 requirements. Shipped assembled.

Anchor Grip Holding PkgPart # dia. x Length Range Power* Qty23-082 3/16x7/8 0-1/8 500 Lbs. 10023-083 1/4x1" 1/8-1/4 820 Lbs. 10023-084 1/4x1-1/4 1/4-1/2 970 Lbs. 10023-085 1/4x1-1/2 1/2-3/4 1150 Lbs. 10023-086 1/4x2" 3/4-1-1/4 1300 Lbs. 100* Safe working load is 25% of holding power.

nylon nail (drive)Anchors

Use in hollow walls or solid materials for light duty fastening in concrete, block, brick, plastic, wallboard, sheet metal, wood, plaster, glass, slate, marble and tile. zinc coated high carbon steel nail is slotted for easy removal. Shipped assembled. Drill size: 1/4". 9/16" dia. truss head. Pkg: 100 each Part Anchor Holding Power*number diameter Length Shear Tensile23-119 1/4" 3/4 884# 261#23-120 1/4" 1" 884# 261#23-121 1/4" 1-1/2 951# 320#23-122 1/4" 2" 972# 320#

*Safe working load limit is 25% of holding power.

Lag Screw Shield Anchors

Lag screw shields are designed for light to medium duty fastening in concrete, mortar joints, masonry and brick. Achieves tighter grip in out-of-round holes. For medium to heavy service in all types of masonry. Exclusive "off-center" internal threads cause shield to split and shift when expanding to allow four points of contact. Hinged two-piece construction. For use with lag screws (sold separately), the screw length can be determined by adding the length of the anchor and the thickness of material, plus 1/4". Made from zinc alloy.

SHORT STyLePart Screw Anchor drill Holding Pkgnumber Size Length Size Power Qty23-095 1/4 1" 1/2 1450 10023-096 5/16 1-1/4 1/2 1510 10023-097 3/8 1-3/4 5/8 1600 5023-098 1/2 2" 3/4 2000 50

LOnG STyLePart Screw Anchor drill Holding Pkgnumber Size Length Size Power Qty23-099 1/4 1-1/2 1/2 1620 10023-100 5/16 1-3/4 1/2 1700 10023-101 3/8 2-1/2 5/8 1850 5023-102 1/2 3" 3/4 2800 50

The original "plastic screw anchor" is made of tough and durable vinyl. Cut-to-length as needed. Use with metal screws and lag screws in a variety of solid and hollow materials such as concrete, brick, masonry, wood, plaster and drywall. Pkg. 100 each.

Part Screw drill Anchor number Size Size Length Color23-135 10-12 1/4 1" Green23-137 10-12 1/4 1-1/2 Green23-139 14-1/4 5/16 1" Blue

Vinyl Screw Anchors(Vinyl Plugs or Tubular Anchors)


6-8 COMBO (PHIL/SLOT) PAN ~ BLUE CONICAL FASTENER ANCHOR KIT 100 6-8 x 3/4 ANCHOR 100 6 X 3/4 COMBO PAN A TAPPING SCREWS 1 CARBIDE DRILL BIT PART nUMBeR 23-114

10-12 COMBO (PHIL/SLOT) PAN ~ BLUE CONICAL FASTENER ANCHOR KIT 100 10-12 X 1 ANCHORS 100 10 X 1 COMBO PAN A TAPPING SCREWS 1 CARBIDE DRILL BIT PART nUMBeR 23-115

12-14 COMBO (PHIL/SLOT) PAN ~ BLUE CONICAL FASTENER ANCHOR KIT 50 12-14 X 1-1/4 ANCHORS 50 12-14 X 1-1/4

COMBO PAN A SCREWS 1 CARBIDE DRILL BIT PART nUMBeR 23-116

Hands down...this is the toughest, most durable plastic screw anchor design yet. Horizontal ribs for superior pull-out strength, helps prevents anchor from falling out in overhead positions. Vertical rib design stops anchor from turning. Applications: telephones, panels, signs, mirrors, conduit straps, cabinets, draperies, blinds and other light weight wall-mounted accessories. Corrosion-proof, weather and impact resistant. Color: blue.

Part Screw drill Anchor Pkgnumber Range Size Length Qty23-111 6-8 3/16 3/4 10023-112 10-12 1/4 1" 10023-113 14-16 5/16 1-1/4 100

Conical Screw Anchors

Hollow Wall Anchor Setting Tool

Easy to use. Replace the tiresome old screwdriver method with a fast and easy method of installing hollow wall anchors. Great for high volume installations and tight corners. Quick release trigger. Cushion grip handles. Part number 10-497

Conical Screw Anchors Kits

Deep ribbed body provides improved pullout strength. Vertical rib design stops anchor from turning. Use in brick, concrete, drywall and masonry.

Part Screw drill Anchor Pkgnumber Range Size Length Qty23-103 6-8Yellow 3/16 3/4 10023-104 10-12Blue 1/4 1" 10023-105 12-14Red 5/16 1-1/4 100

Ribbed Conical Plastic Anchors

Wallboard Anchors

SELF-DRILLING NO HOLE PREPARATIONSelf-piercing points cuts right through 3/8" to 5/8" thick drywall without predrilling. Use with standard #8 sheet metal screws†. Use anywhere plastic screw anchors or toggle bolts are used. No power tools required for installation or removal. Use a common #2 phillips screwdriver or for high volume installations use a power screwdriver. Material: zinc Alloy or Nylon.

Part Holding Pkgnumber Type Power Qty23-185 zinc Alloy 110 lbs. 10023-195 Nylon 80 lbs. 100

†Screws must be ordered separately. ‡ Strength tested with #8 screw in 1/2" thick drywall.

Part Trade Grip Screw Hole Bodynumber Size Range Size Size LengthSTAndARd HOLLOW WALL AnCHORS23-150 1/8 X-SHORT 1/16-1/4 6-32 5/16 3/423-151 1/8 SHORT 1/8-1/2 6-32 5/16 1-1/423-152 1/8 LONG 5/8-7/8 6-32 5/16 1-5/823-153 1/8 X-LONG 1¼ - 1½ 6-32 5/16 2-1/423-154 3/16 SHORT 1/8-5/8 10-24 3/8 2-1/1623-155 3/16 LONG 5/8-1-3/16 10-24 3/8 2-1/223-157 1/4 SHORT 1/8-5/8 1/4-20 1/2 2-1/1623-158 1/4 LONG 5/8-1-3/16 1/4-20 1/2 2-1/2dRIVe TyPe HOLLOW WALL AnCHORS23-209 1/8 SHORT 1/8-1/2 6-32 5/16 1-3/423-210 1/8 LONG 5/8-7/8 6-32 5/16 2-11/32

Hollow Wall Anchors(Molly Anchors)

Designed to be used in materials such as wall-board, plaster, paneling, hollow block, etc. Prongs underhead keep the anchor from rotating while being set. The anchor expands behind the surface as the screw is tightened. Once set, the screw may be removed as often as necessary. For faster or high volume installations use the setting tool shown below. Bright zinc finish. Package Qty 100.


Kap-Toggle® Heavy duty Hollow Wall Anchors

Toggle Wings

Superior holding power for heavy duty attachments to hollow walls or ceilings. Railings, plumbing, towel bars, hanging planters, gates, boat attachments, sinks, speakers, ceiling fans, lighting fixtures, mirrors, shelving, racks, electri-cal panels, door tracks, fire equipment.

Use in any hollow core substrate. Drywall, sheet rock, paneling, stucco, hollow brick, plaster, wood, gypsum board, cinder block, concrete and fiberglass. W.L.L.*Part Bolt Hole Grip 1/2" Cinder Pkgnumber Size Size Range drywall Block Qty 23-192 6-32 3/8" 2" 37# 102# 5023-193 10-24 1/2" 2-1/2 38# 150# 5023-194 1/4-20 5/8" 2-1/2 40# 300# 50

*Working Load Limit. Use with machine screws same as toggle bolt sizes. Screws must be ordered separately.

Toggle Bolts

Excellent holding power in all types of hollow materials such as drywall, plaster, glass, concrete or cinder block. Includes both round head slotted machine screws and toggle wings. zinc finish.

Part drill Pkgnumber dia. Length Size Qty23-160 1/8 (6-32) 2" 3/8 5023-162 1/8 (6-32) 4" 3/8 5023-168 1/4-20 3" 5/8 5023-170 1/4-20 5" 5/8 5023-171 1/4-20 6" 5/8 50

Length measured from under head.For sizes not listed, order Machine Screws and Toggle

Wings (below) separately.

Heavy duty toggle wings have appropriate sizing stamped on the wings for easy identification. zinc finish.

Part Wing Hole Pkgnumber Size Length Size Qty23-179 1/8 (6-32) 1-3/4" 3/8" 10023-180 3/16 (10-24) 2-1/4" 1/2" 10023-181 1/4-20 2-1/4" 5/8" 10023-182 5/16-18 2-3/4" 7/8" 5023-183 3/8-16 3-1/4" 1" 50

Our most versatile and powerful hand riveter takes the hard work out of setting large diameter blind rivets, in all alloys. Its extra-long handles provide extra leverage and permit working a foot beyond natural reach. The Big Daddy comes with 5/32", 3/16", and 1/4" nosepieces which are stored in the body. Weight: 3.75 lbs. Made in the U.S.A. by Marson. Part number 20-918

Big daddy® Rivet Tool

The Kliker is the perfect medium duty tool, setting all 1/8" to 5/32" steel, and 3/16" all aluminum Klik-Fast rivets. The kliker comes packaged in a heavy duty vinyl pouch with an assortment of Klik-Fast rivets and washers. Imported. Part number 20-917

The Kliker®

For 3/32", 1/8", 5/32", and 3/16" diameter aluminum and steel rivets. Die cast aluminum alloy body. Heat treated steel upper handle. Long life jaws. Made in the U.S.A. by Marson. Part number 20-915

deluxe Hand Riveter

Includes 20-915 above plus 200 assorted rivets in popular sizes. Molded plastic case houses and protects contents. Made in the U.S.A. by Marson. Part number 20-916

deluxe Riveter Kit


Part numbers (L) Alum. Rivet Alum. Rivet Steel Rivet Grip Range RivetAlum. Stem Steel Stem Steel Stem Min.. Max. Length (Actual Size Pictures)1/8" dIA. (d) dOMe HeAd • Drill size: 30 20-002 - - .020 1/16 .212

20-003 20-028 20-054 .063 1/8 .275

20-004 20-029 20-055 .188 1/4 .400

20-005 20-030 20-056 .313 3/8 .525

20-006 20-031 20-057 .376 1/2 .6501/8" dIA. (d) LARGe FLAnGe • Drill size: 30 20-007 20-032 20-058 .032 1/8 .275

20-008 20-033 20-059 .188 1/4 .4001/8" dIA. (d) 120° COUnTeRSUnK • Drill size: 30 20-009 20-034 20-060 .062 1/8 .300

20-010 20-035 20-061 .188 1/4 .425

5/32" dIA. (d) dOMe HeAd • Drill size: 20 20-011 20-036 20-062 .062 1/8 .300

20-012 20-037 20-063 .188 1/4 .425

20-013 20-038 20-064 .251 3/8 .501

20-014 20-039 20-065 .376 1/2 .675

3/16" dIA. (d) dOMe HeAd • Drill size: 11 20-015 20-040 20-066 .062 1/8 .325

20-016 20-041 20-067 .126 1/4 .450

20-017 20-042 20-068 .251 3/8 .571

20-018 20-043 20-069 .376 1/2 .700

20-019 20-044 20-070 .501 5/8 .825

20-020 20-045 20-071 .626 3/4 .950

3/16" dIA. (d) LARGe FLAnGe • Drill size: 11 20-022 20-047 20-073 .251 3/8 .575

20-023 20-048 20-074 .376 1/2 .700

- 20-049 20-075 .501 5/8 .825

20-025 20-050 20-076 .626 3/4 .950

All Pkg. Qty. — 250 each

• For blind fastening where there is no access to opposite side of work. • Vibration and tamper resistant. • Simple to install • Securely fastens thin and thick applications in most materials. • Low head profile head for a snag-free smooth appearance.

Blind Rivets


PARTS FOR deLUxe RIVeTeR (20-915) KLIKeR® (20-917)Marson models HP-2 (39000) and Kliker (39040)Partnumber Item20-919 3/32 Nosepiece (M8 x 1.25) 20-920 1/8 Nosepiece (M8 x 1.25) 20-921 5/32 Nosepiece (M8 x 1.25) 20-922 3/16 Nosepiece (M8 x 1.25) 20-927 Jaw Set (2)

PARTS FOR BIG dAddy® RIVeTeR (20-918) Marson model 39031Part number Item20-923 1/8 Nosepiece (M10 x 1.0) 20-924 5/32 Nosepiece (M10 x 1.0) 20-925 3/16 Nosepiece (M10 x 1.0) 20-926 1/4 Nosepiece (M10 x 1.0) 20-928 Jaw Set (2)

CONTAINS 6 SIzES, 1/8" AND 3/16" DIAMETER ALL-ALUMINUM RIVETS IN LARGE ADJUSTABLE DRAWER. PART nUMBeR 16-4806

Riveter nosepieces & Jaw SetsALUMInUM BLInd RIVeT

ASSORTMenT

Part Grip Range Rivetnumber dia. Min.. Max. LengthAll T305 Stainless Steel, dome Head20-215 1/8 .188 1/4 .40020-216 3/16 .126 1/4 .450

Painted All Aluminum, White dome Head20-213 1/8 .063 1/8 .27520-214 1/8 .188 1/4 .400

Special Blind Rivets

SPACE FOR OPTIONAL RIVET guN

Backup Washers Reinforces blind rivets in soft materials.

Package Qty: 250Thickness: .056".

Part SIZenumber I.d O.d. Material20-086 1/8" 3/8" Steel20-087 5/32" 7/16" Aluminum20-088 3/16" 1/2" Steel

Part numbers (L) Alum. Rivet Alum. Rivet Steel Rivet Grip Range RivetAlum. Stem Steel Stem Steel Stem Min.. Max. Length (Actual Size Pictures)1/4" dIA. (d) dOMe HeAd • Drill size: F - - 20-078 .125 1/4 .500

- 20-052 - .251 3/8 .625

- - 20-080 .376 1/2 .750

- - 20-082 .501 3/4 1.00

Blind Rivets

MAINTENANCE PRODUCTS INC. • (800) 523-2367 (219) 696-6411 2-IRevised 01/2012

Section 2 Thread Repair Insert

AAll-Thread (Rod) 2-6Assortments/Kits

Nutsert Tool Kit 2-5

BBar Stock 2-7

CConversion Kits, Nutsert 2-5Couplers

Threaded Rod 2-7

DDrill

Rod 2-7

HHeli Coil Style Inserts 2-2

IInsert Systems 2-1

MMetric

Thread Inserts (Recoil) 2-3

NNuts

Jack 2-5Mirror 2-5Nutserts 2-4Rivet 2-4, 2-5Rod Coupler 2-7

Nutserts 2-4

RReady Rod 2-6Recoil Inserts 2-3Recoil Taps 2-2Rivet Nuts 2-4, 2-5Rod

Drill 2-7Forming 2-7Storage Rack 2-6Threaded 2-6

Rod Couplers 2-7

SSpark Plug

Inserts (Recoil) 2-3Thread Repair Kits (Recoil) 2-3

STI TapsUNC/UNF 2-2

StockBar (Round) 2-7

TTaps

Heli Coil 2-2STI 2-2

Threaded Rod 2-6Alloy Steel 2-6Left Handed 2-7Metric 2-6Ready Rod 2-6Regular 2-6Stainless Steel 2-7

Threaded Rod Rack 2-6Thread Inserts

E-Z Lok 2-4Jack 2-5Nutsert 2-4Recoil 2-2, 2-3

ToolsHollow Wall Anchor 2-5Nutsert Installation 2-5

WWell Nuts 2-5

2-II FAX: (219)-696-6413 • WEBSITE: http://www.mpi-online.comRevised 01/2012

http://www.mpi-online.com/


Inch SizesCOARSe THReAdPart Insert Insert Heli-Coil Pkgnumber Size Length Cross-ref. Qty23543 4-40 .152 - 1023563 6-32 .191 - 1023583 8-32 .246 R1185-2 1023603 10-24 .285 R1185-3 1023623 12-24 .324 R1185-1 1023043 1/4-20 .375 R1185-4 1023053 5/16-18 .469 R1185-5 1023063 3/8-16 .562 R1185-6 1023073 7/16-14 .656 R1185-7 1023083 1/2-13 .750 R1185-8 1023093 9/16-12 .844 R1185-9 523103 5/8-11 .938 R1185-10 523123 3/4-10 1.125 R1185-12 523143 7/8-9 1.312 K1185-14 323163 1-8 1.50 K1185-16 3

18-8 (T304) stainless steel inserts. Corrosion resistant. No pre-winding. Interchangeable with other helical systems. Stackable. Wide temperature tolerance (-270°F to +774°F). Meets current military (MS) and aircraft (AN) specifications. May be used in many materials such as steel, stainless steel, exotic alloys, magnesium, cast iron, plastics, and aluminum.

FIne THReAdPart Insert Insert Heli-Coil Pkgnumber Size Length Cross-ref. Qty23603 10-32 .285 R1191-3 1024043 1/4-28 .375 R1191-4 1024053 5/16-24 .469 R1191-5 1024063 3/8-24 .562 R1191-6 1024073 7/16-20 .656 R1191-7 1024083 1/2-20 .750 R1191-8 1024093 9/16-18 .844 R1191-9 524103 5/8-18 .938 R1191-10 524123 3/4-16 1.125 R1191-12 524143 7/8-14 1.312 K1191-14 324163 1-14 1.50 K1191-16 3

Also available on request; Bulk quantities, special lengths, special threads, self-locking inserts, strip-feed inserts, special taps, prewinders for fine threads, power insertion tools and extraction tools

Quality Thread Insert SystemsRecoil inserts are rolled from high quality stainless steel wire with a diamond shaped cross section, wound to the shape of a spring thread. Once the insert is installed into a tapped hole, it provides a permanent and wear resistant thread in the parent material designed to be stronger than the original thread.

The inserts are greater in diameter than the cor-responding tapped hole and compress as they are installed. This allows maximum surface contact area with the tapped thread, safely and permanently an-choring the inserts into place.

The insert’s compensatory action shares the load over the entire bolt and hole, increasing holding or pull out strength. With a Recoil insert in place, load and stress are more evenly distributed.

Recoil inserts are installed in four easy steps...

2-2 FAX: (219)-696-6413 • WEBSITE: http://www.mpi-online.comRevised 01/2012

For use with Recoil® Inserts*Intermediate (universal plug) tap manufactured to the H-limit requirements for Recoil helical style inserts. These ground thread taps are made from quality high speed steel. Pkg. 1 each

Part Thread HeliCoilnumber Size Cross-ref COARSe THReAd 43515 4-40 -43565 6-32 -43585 8-32 819-243605 10-24 819-343625 12-24 819-143045 1/4-20 819-443055 5/16-18 819-543065 3/8-16 819-643075 7/16-14 819-743085 1/2-13 819-843095 9/16-12 819-943105 5/8-11 819-1043125 3/4-10 819-1243145 7/8-9 8187-1443165 1-8 8187-16

FIne THReAd 44605 10-32 821-344045 1/4-28 821-444055 5/16-24 821-544065 3/8-24 821-644075 7/16-20 821-744085 1/2-20 821-844095 9/16-18 821-944105 5/8-18 821-1044125 3/4-16 821-1244145 7/8-14 8193-1444175 1-14 8193-16

*Interchangeable with HeliCoil® brand STI Taps.

These special STI taps are also available on request...taper, bottoming, pilot nose, spiral point, and spiral flute.

Call for more information.

STI Taps (Screw Thread Insert Taps)

Inch Sizes

Thread Repair KitsInCH SIZeS

Kit Inserts drillPart number Size Per Kit Size

COARSe THReAd33580 8-32 10 11/6433600 10-24 10 13/6433620 12-24 10 15/6433040 1/4-20 10 17/6433050 5/16-18 10 21/6433060 3/8-16 10 25/6433070 7/16-14 10 29/6433080 1/2-13 5 17/3233090 9/16-12 5 19/3233100 5/8-11 5 21/3233120 3/4-10 5 25/3233140 7/8-9 5 29/3233160 1-8 5 1-1/32

FIne THReAd34600 10-32 10 13/6434040 1/4-28 10 17/6434050 5/16-24 10 21/6434060 3/8-24 10 25/6434070 7/16-20 5 29/6434080 1/2-20 5 33/6434090 9/16-18 5 37/6434100 5/8-18 5 41/6434120 3/4-16 5 49/6434140 7/8-14 5 57/6434170 1-14 5 1-1/64

Each individual size repair kit includes one high quality STI tap, one installation-tang break off tool, and a quantity of inserts in a sturdy steel case.

UnC/UnFIndividual Size Repair Kits

Complete master range kits are availabe on request.



Part number Size Per Kit Size*COARSe PITCH

35050 5x .8 10 13/64"35060 6x1.0 10 1/4"35070 7x1.0 10 9/32"35080 8x1.25 10 21/64"35100 10x1.5 10 13/32"35120 12x1.75 5 31/64"35140 14x2.0 5 37/64"

FIne PITCH37080 M8x1.0 10 21/64"37100 M10x1.25 10 13/32"37120 M12x1.5 5 31/64"

*Drilling is normally not required when damaged threads have been fully stripped.

Spark Plug Thread Repair Kits

Each kit includes special pilot nose tap*, installation-tang break-off tool, insert-extraction tool, a quantity of inserts and simple instructions in a sturdy steel case.

Special pilot nose tap "reams" hole to the perfect size, ensuring a perfectly tapped hole every time!

Part Inserts drill .number Size Per Kit Size*38140 14x1.25 10 9/16Drilling is not required when using special tap supplied to

repair stripped threads.

Individual Size Repair KitsMetric Sizes

Includes;High quality tap, Installation-tang break off tools, inserts, and simple instructions, in a steel box.Kit Inserts drill

Metric Thread Repair Kits

Metric & Spark Plug SizesPart Insert Insert Heli-Coil Pkgnumber Size Length Cross-ref. Qty COARSe PITCH25053 5-0.8 7.5mm R1084-5 1025063 6-1.0 9mm R1084-6 1025073 7-1.0 10.5mm R1084-7 1025083 8-1.25 12mm R1084-8 1025103 10-1.5 15mm R1084-10 1025123 12-1.75 18mm R1084-12 10

FIne PITCH28103 10-1.0 15mm R4255-10 1027103 10-1.25 15mm R4649-10 10271231 2-1.5 18mm R4255-11-10 1027143 14-1.5 21mm R3745-14 5

SPARK PLUG SIZeS28148 14-1.25 3/8" R512 1028149 14-1.25 1/2" R513-13 1028140 14-1.25 3/4" R513-10 10

Insertion tools and extractors available upon special request.

Metric Inserts18-8 (T304) stainless steel inserts. Corrosion resistant. No pre-winding. Interchange-able with other helical systems. Stackable. Wide temperature tolerance (-270°F to +774°F). Meets cur-rent military (MS) and aircraft (AN) specifications. May be used in many materials such as steels, alloys, magnesium, plastics, and aluminum.


Coarse Thread TapPart Internal external drill Pkgnumber Thread Thread* Length Size Qty329-001 4-40 10-32 .250 5/32 10329-008 8-32 5/16-18 .290 F 10329-3 10-24 3/8-16 .406 5/16 10329-4 1/4-20 7/16-14 .437 23/64 10329-5 5/16-18 1/2-13 .484 27/64 10329-6 3/8-16 9/16-12 .515 31/64 10329-7 7/16-14 5/8-11 .656 17/32 5329-8 1/2-13 3/4-10 .656 21/32 5329-9 9/16-12 3/4-10 .656 21/32 5329-10 5/8-11 7/8-9 .687 49/64 5329-14 7/8-9 1-1/4-7 1.125 1-7/64 5THIn WALL InSeRTS319-3 10-24 5/16-18 .312 I 10319-4 1/4-20 3/8-16 .375 Q 10319-7 7/16-14 9/16-12 .560 33/64 5319-8 1/2-13 5/8-11 .620 37/64 5

Fine Thread TapPart Internal external drill Pkgnumber Thread Thread* Length Size Qty329-332 10-32 3/8-16 .406 5/16 10329-524 5/16-24 1/2-13 .484 27/64 10329-624 3/8-24 9/16-12 .515 31/64 10329-720 7/16-20 5/8-11 .656 17/32 5329-10F 5/8-18 7/8-9 .687 49/64 5

THIn WALL InSeRTS319-332 10-32 5/16-18 .312 I 10319-524 5/16-24 7/16-14 .437 X 10319-720 7/16-20 9/16-12 .560 33/64 5319-820 1/2-20 5/8-11 .620 37/64 5

Thread Inserts

Will not back out or vibrate loose! Immediately on installation, micro-encapsulated Loctite® begins to set, and the newly installed insert can be fastened to within minutes. The adhesive continues to cure overnight until completely set. In addition, the adhesive seals against liquids and gases to pressures of 6,000 psi, and bonds to virtually all metals. E-z Lok inserts are removable with standard screw extractors.

Ask for the E-Z LOK catalog with a complete line of heavy wall inserts, metric inserts, power drivers, stainless steel inserts, knife thread inserts for wood, knurled inserts for plastic and E-Z Lok assortments.

Heavy duty Carbon Steel Thread Inserts For Metal

*External thread listed is also tap size.

nutserts

1. Nutsert in pre- 2. Base partially drawn 3. Fully installed. drilled hole. into sleeve.

An anchor/nut-type “blind” insert. Provides load bearing threads in sheet metal, steel castings, fiberglass, fiberboard, plastics and wood. Unique “Taper-Lock” feature; mandrel breaks the conical-shaped portion loose, drawing it up into the sleeve for a 360° contact fit. Can be installed in any material thickness from .030". Made of 1006-1010 Steel

InCH SIZeS (COARSe & FIne)Part no. Size drill Size Qty32003 6-32 UNC 7/32 5032004 8-32 UNC 1/4 5032005 10-24 (3/16) UNC 9/32 5032006 10-32 (3/16) UNF 9/32 5032007 1/4-20 UNC 3/8 5032008 1/4-28 UNF 3/8 5032009 5/16-18 UNC 1/2 2532010 5/16-24 UNF 1/2 2532011 3/8-16 UNC 9/16 25

Thin Sheet nutserts (TSN's)

Threaded portion of insert is drawn towards tool, collapsing the unthreaded portion outward, causing a flange to form on the blind side of work. AISI 1010 Steel or Aluminum.

InCH SIZeS (COARSe & FIne)SteelSize Steel drill Size Qty32036 6-32 1/4 5032037 8-32 1/4 5032038 10-2 9/32 5032039 10-32(NF) 9/32 5032040 1/4-20 3/8 5032041 5/16-18 1/2 25Aluminum32046 6-32 1/4 5032047 8-32 1/4 5032048 10-24 9/32 50

TSN installed



Jack nuts®

Used for mounting automotive mirrors, license plates, radiator brackets, voltage regulators, dome lights, luggage racks covers and supports. Use with thin, hollow wall or solid material. AISI 1010 Steel • zinc Finish

Part Unit Thread Body Head Cap Over Grip Required Maximumno. Pkg (e) dia. (A) dia. (B) (C) -all(d) Range(G) Hole dia. Spread (F)**03-237 25 6-32 .318 .468 .073 .841 3/16"-3/8" .315-.330 .72003-238 25 10-24 .382 .531 .073 .716 1/64"-3/16" .385- .400 .76003-241 25 1/4-20 .438 .625 .073 .919 3/16"-3/8" .434-.450 .89003-242 25 1/4-20 Special purpose mirror mounting nut with rain-tight sealer (GM #367292)

**Spread varies with material thickness

Jack nut® Setting ToolA much faster method of installing jack nuts, as well as hollow wall anchors. For high volume installations, tight corners. Cushion grip handles. Imported. Part no. 10-497

Jack nut® Friction Wrench

Inexpensive tool keeps nut from spinning. Pkg. 10 each. Part no. 03-254

Well nuts®

Used for mounting automotive mirrors, license plates, radiator brackets, voltage regulators, dome lights, luggage racks covers and supports. Use with thin, hollow wall or solid material. Made of neoprene with captive brass nut.

Part Pkg Thread Head Overall Shank Shank Cap Hole Size For Wall no. Qty (e) (A) dia. Lgth(B) Length(C) dia.(d) Thk(F) Required Thickness03-228 25 6-32 .452 .499 .437 .312 .062 5/16 .015 - .15603-235 25 8-32 Special purpose OEM well nut for S10 pickups (GM #14048060)03-229 25 10-32 .500 .554 .518 .377 .036 3/8 .015 - .19203-230 10 10-32 .562 1.05 1.000 .375 .051 3/8 .312 - .64303-231 10 10-32 .562 .665 .625 .625 .377 3/8 .035 - .23203-232 10 1/4-20 .740 .829 .642 .500 .187 1/2 .031 - .18703-234 25 1/4-20 Special purpose OEM well nut for luggage racks (GM #528846, AMC #4003120)03-233 10 5/16-18 .875 .725 .600 .620 .125 5/8 .015 - .187

nUTSeRT HAnd TOOLInstalls nutserts and thin sheet nutserts. Includes hand tool and wrench. Conver-sion kits must be ordered separately. Cannot be used on large flange nutserts 1/4, 5/16, 5/8PART nO. 32070

nutsert Installation Tools

nUTSeRT TOOL KITIncludes hand tool, wrench and con-version kits for sizes6-32, 8-32, 10-24, 1/4-20, 5/16-18, plus mandrel only for 10-32. Includes metal carrying case.PART nO. 32071

nutsert Conversion Kits

For use with 32070 Nutsert Tool.

STAndARdPart no. Size Qty32057 6-32 UNC 132058 8-32 UNC 132059 10-24 UNC 132060 10-32 UNF 132061 1/4-20 UNC 132063 5/16-18 UNC 132065 3/8-16 UNC 1


Metric Threaded RodDIN 975-8 Class 8.8 heat treated mild steel. Tensile strength: 113,000 psi. Ref. ISO 898/1 1978. Plain finish. Coarse Pitch Length: 1 meter†

Part Thread dia. Pkgnumber x Pitch Qty99-114 M8 x 1.25 1 99-115 M10 x 1.5 199-116 M12 x 1.75 199-117 M14 x 2.0 199-118 M16 x 2.0 199-120 M20 x 2.5 199-122 M24 x 3.0 1

† Approximately 39 inches or 3.28 ft.

Regular Threaded Rod

Coarse ThreadPart Pkgnumber Size Qty99-008 1/4-20 599-009 5/16-18 599-010 3/8-16 599-011 7/16-14 599-012 1/2-13 599-014 5/8-11 399-015 3/4-10 399-016 7/8-9 399-017 1"-8 399-018 1-1/8-7 199-019 1-1/4-7 1

Fine ThreadPart Pkgnumber Size Qty99-022 5/16-24 599-023 3/8-24 599-024 7/16-20 599-025 1/2-20 599-026 9/16-18 399-030 1"-14 399-031 1-1/4-12 1

Machine Screw SizesPart Pkgnumber Size Qty99-003 6-32 1099-004 8-32 1099-005 10-24 (3/16 UNC) 1099-007 12-24 10

(All-Thread or Ready Rod)Use threaded rods for fast do-it-yourself special bolts, threaded studs, bent anchor bolts, hangers, hooks, tie-downs, clamps, etc. AISI 1008-1018 low carbon steel. Meets ASTM A307, A108 requirements. Hardness: Rb73. Tensile strength: 65,000 psi. mini-mum. zinc finish. Length: 36"

Heat treated chromium-molybdenum steel, normally AISI 4140, meets ASTM-193 grade B7 material for high temperature service. 4142, or 4145 alloy steel. Use for high strength bolting or making threaded studs. Tensile strength: 125,000 psi. Hardness is RC 28-32. Rolled threads, not cut. Plain finish Length: 36"

Coarse ThreadPart Pkgnumber Size Qty99-045 1/4-20 299-046 5/16-18 299-047 3/8-16 299-048 7/16-14 199-049 1/2-13 199-050 9/16-12 199-051 5/8-11 199-052 3/4-10 199-053 7/8-9 199-054 1"-8 199-056 1-1/4-7 199-057 1-1/2-6 1

Fine ThreadPart Pkgnumber Size Qty99-059 5/16-24 199-060 3/8-24 199-061 7/16-20 199-062 1/2-20 199-063 5/8-18 199-064 3/4-16 199-065 7/8-14 199-066 1"-14 199-067 1-1/8-12 199-068 1-1/4-12 1

Available in lengths up to 144" and larger diameters

Alloy Steel Threaded Rod

Displays, organizes and protects up to 6 ft long threaded rod, round bar and many other materials. Has eighteen 2-1/16" diameter openings. Measures 24-1/8"W x 24"H x 6-7/8"D. Heavy gauge cold rolled steel. Interlocking design. Color is gray. Part number 99-112

Threaded Rod Rack

(Threaded rod not included)



Forming Rod

Round bar is cold-drawn C-1010, except 7/8" and 1" diameter which are hot rolled C-1025 carbon steel. zinc finish.

Length: 36"Part Pkgnumber diameter Qty99-143 3/16 1099-144 1/4 1099-145 5/16 1099-146 3/8 1099-147 7/16 1099-148 1/2 1099-149 5/8 599-150 3/4 599-151 7/8 599-152 1" 5

Water-Hardened drill Rod

Water quenching drill rod heat treats evenly and provides toughness and maximum wear resistance. Ideal for maintenance use even without heat-treating. Use this round stock for machining tools, dies, dowels, keys, tabs, arbors, special threaded rods, roller bearings, mandrels, punches, pinions, knock-out pins, pins, etc.. Ground and polished to a surface finish of better than 40 micro inches. Supplied in annealed condition. Ready for machining and heat-treating. Plain finish. Length: 36"

Part Pkgnumber diameter Qty99-100 1/16 599-101 1/8 599-102 5/32 599-104 7/32 599-105 1/4 599-106 5/16 599-107 3/8 399-108 7/16 399-109 1/2 299-111 3/4 2

Type 304 stainless provides excellent corrosion re-sistance. Tensile strength: 70,000 psi. Nonmagnetic. Rolled threads. Length: 36" Coarse Threads

Part Pkgnumber Size Qty99-079 1/4-20 199-080 5/16-18 199-081 3/8-16 1 99-082 7/16-14 199-083 1/2-13 199-084 5/8-11 199-085 3/4-10 199-086 7/8-9 199-087 1"-8 1

Stainless Steel Threaded Rod

Left Hand Threaded Rod

Make custom left hand threaded bolts, studs or adjust-ment screws. AISI 1008 low carbon steel. 65,000 psi min. tensile strength. Plain finish. Length: 36" Coarse Threads

Part Pkgnumber Size Qty99-168 1/4-20 199-169 5/16-18 199-170 3/8-16 199-171 7/16-14 199-172 1/2-13 199-174 5/8-11 199-175 3/4-10 199-177 1"-8 1

Rod Couplers(Hex Coupling Nuts or Extension Nuts)

Fully threaded nuts used for joining two or more rods or studs. Also used for leveling feet, jig fixtures and spacing applications. Double chamfered. AISI 1010 - 1018 mild steel. Tensile strength: 60,000 psi. Coarse thread only. zinc finish.

Part Bolt Pkgnumber Size Length W.A.F.† Qty03-320 10-24 3/4 5/16 5003-321 1/4-20 7/8 3/8 5003-322 5/16-18 1-1/8 5/8 2503-323 3/8-16 1-3/4 5/8 2503-325 1/2-13 1-3/4 11/16 2503-326 5/8-11 2-1/8 13/16 1503-327 3/4-10 2-1/4 1" 1503-329 1"-8 2-1/2 1-1/4 1003-331 1-1/4-7 3" 1-5/8 10

† Width across flats or wrench size


Section 3 Screws

DDrive Screws (Rivets) 3-5

OOne Way Security Screws 3-10

RRivets

Drive (Type U) 3-5

SScrews

Chrome trim 3-9Construction 3-10Deck 3-5Drill 3-10, 3-12Drive (Type U) 3-5Drywall 3-5Header Teks 3-4Machine 3-2, 3-3Metal Building 3-10Phillips Machine 3-3Robertson Head 3-8Self Drilling 3-4, 3-10Self Piercing 3-11Self Tapping 3-4Sheet Metal 3-7, 3-8, 3-10Stove Bolts 3-1, 3-2Tapping 3-4, 3-7, 3-8, 3-11Teks® 3-10Thread Cutting 3-5Thumb 3-4Trailer 3-4Wafer Hd. 3-12Wall Liner 3-12Wood

Steel 3-6WoodGrip Drill 3-10

Security Screws 3-10

TTamperproof Screws 3-10


http://www.mpi-online.com


Slotted Steel Machine ScrewsDeep slots and clean, sharp threads. Bright zinc finish. 1018 low carbon steel.

ROUnd#3-48 dIAMeTeR

Part # Size Pkg Qty25-004 1/4 10025-005 3/8 10025-006 1/2 10025-007 3/4 100

#4-40 dIAMeTeR25-276 3/16 10025-008 1/4 10025-009 3/8 10025-010 1/2 10025-011 3/4 10025-014 1-1/2 100

#5-40 dIAMeTeR25-016 1/4 10025-017 3/8 10025-018 1/2 10025-020 3/4 10025-021 1" 100

#6-32 dIAMeTeR25-022 1/4 10025-023 3/8 10025-024 1/2 10025-025 5/8 10025-026 3/4 10025-027 7/8 10025-028 1" 10025-029 1-1/4 10025-030 1-1/2 10025-031 1-3/4 10025-032 2" 10025-033 2-1/2 10025-034 3" 10025-035 4" 100

#8-32 dIAMeTeR25-038 1/4 10025-039 5/16 10025-040 3/8 10025-041 1/2 10025-042 5/8 10025-043 3/4 10025-044 1" 10025-045 1-1/4 10025-046 1-1/2 10025-047 1-3/4 10025-048 2" 10025-054 4-1/2 10025-055 5" 100

#10-24 dIAMeTeRPart # Size Pkg Qty25-056 1/4 10025-057 3/8 10025-058 1/2 10025-059 5/8 10025-060 3/4 10025-061 1" 10025-062 1-1/4 10025-063 1-1/2 10025-064 1-3/4 10025-065 2" 10025-066 2-1/4 10025-067 2-1/2 10025-068 3" 100 25-069 3-1/2 10025-070 4" 10025-071 5" 10025-072 6" 100

#10-32 dIAMeTeR25-073 1/4 10025-074 3/8 10025-075 1/2 10025-077 3/4 10025-078 1" 10025-079 1-1/4 10025-080 1-1/2 10025-081 1-3/4 10025-082 2" 10025-083 2-1/2 10025-084 3" 10025-085 3-1/2 10025-086 4" 10025-087 4-1/2 10025-088 5" 10025-089 5-1/2 10025-090 6" 100

#12-24 dIAMeTeR25-091 1/4 10025-092 3/8 10025-094 5/8 10025-095 3/4 10025-096 1" 10025-097 1-1/4 10025-098 1-1/2 10025-099 1-3/4 100

1/4-20 dIAMeTeRPart # Size Pkg Qty25-103 1/4 10025-105 1/2 10025-106 5/8 10025-107 3/4 10025-108 1" 10025-109 1-1/4 10025-110 1-1/2 10025-111 1-3/4 10025-112 2" 10025-113 2-1/4 10025-114 2-1/2 10025-115 2-3/4 10025-116 3" 100

3/8-16 dIAMeTeR25-139 1/2 10025-140 3/4 10025-141 1" 10025-142 1-1/4 10025-144 1-3/4 10025-145 2" 10025-147 3" 100

PAn#4-40 dIAMeTeR

25-281 3/8 100

#5-40 dIAMeTeR25-017 3/8 10025-018 1/2 100

#6-32 dIAMeTeR25-022 1/4 10025-023 3/8 10025-024 1/2 10025-025 5/8 10025-026 3/4 10025-028 1" 100

#8-32 dIAMeTeR25-041 1/2 10025-044 1" 100


Slotted Steel Machine ScrewDeep slots and clean, sharp threads. Bright zinc finish. 1018 low carbon steel.

PAn HeAd (COnT)#10-24 dIAMeTeR

Part # Size Pkg Qty25-058 1/2 10025-060 3/4 10025-062 1-1/4 100

#10-32 dIAMeTeR25-073 1/4 10025-074 3/8 10025-075 1/2 10025-077 3/4 10025-078 1" 100

1/4-20 dIAMeTeR25-105 1/2 10025-107 3/4 10025-108 1" 100

FILLISTeR#6-32 dIAMeTeR

25-361 5/16 10025-362 3/8 10025-363 1/2 10025-415 1" 10025-416 1-1/4 10025-417 1-1/2 100

#8-32 dIAMeTeR25-364 1/4 10025-365 3/8 10025-366 1/2 10025-419 5/8 10025-370 1-1/2 100

#10-24 dIAMeTeR25-420 3/8 10025-421 1/2 10025-423 3/4 10025-424 1" 10025-425 1-1/4 10025-426 1-1/2 10025-427 2" 100

#10-32 dIAMeTeR25-371 1/2 10025-430 3/4 10025-432 1-1/4 10025-372 2" 100

FILLISTeR1/4-20 dIAMeTeR

Part # Size Pkg Qty25-373 1/2 10025-435 3/4 10025-436 1" 10025-374 1-1/2 10025-375 2" 10025-376 2-1/2 100

#6-32 dIAMeTeR25-168 3/8 10025-169 1/2 10025-170 5/8 10025-171 3/4 10025-172 1" 10025-173 1-1/4 10025-174 1-1/2 10025-175 1-3/4 10025-176 2" 10025-177 2-1/2 10025-178 3" 10025-179 4" 100

#8-32 dIAMeTeR25-181 1/4 10025-182 3/8 10025-183 1/2 10025-184 5/8 10025-185 3/4 10025-186 1" 10025-187 1-1/4 10025-188 1-1/2 10025-189 1-3/4 10025-190 2" 100

FLAT HeAd#10-24 dIAMeTeR

Part # Size Pkg Qty25-193 1/4 10025-194 3/8 10025-195 1/2 10025-196 5/8 10025-197 3/4 10025-199 1" 10025-200 1-1/4 10025-201 1-1/2 10025-202 1-3/4 10025-203 2" 10025-204 2-1/4 10025-205 2-1/2 10025-206 3" 10025-207 3-1/2 10025-208 4" 10025-209 5" 100

#10-32 dIAMeTeR25-212 1/2 10025-213 3/4 10025-214 1" 10025-215 1-1/4 10025-216 1-1/2 10025-217 1-3/4 10025-218 2" 10025-219 2-1/2 100


25-153 3/16 10025-154 1/4 10025-156 1/2 100

#4-40 dIAMeTeR25-159 1/2 100

#5-40 dIAMeTeR25-401 1/4 10025-162 3/8 10025-163 1/2 10025-164 3/4 100

1/4-20 dIAMeTeR25-229 1/2 10025-230 5/8 10025-231 3/4 10025-232 1" 10025-233 1-1/4 10025-234 1-1/2 10025-235 1-3/4 10025-236 2" 10025-237 2-1/2 10025-238 3" 100

#12-24 dIAMeTeR25-222 3/4 10025-223 1" 10025-224 1-1/4 10025-226 2" 100



Phillips Steel Machine ScrewsDeep recess, sharp threads. Flat & oval head have 82° angles. Bright zinc finish. 1018 low carbon steel.

ROUnd HeAd#6-32 dIAMeTeR

Part # Size Pkg Qty24-961 1/2 10024-962 3/4 100

#8-32 dIAMeTeR24-963 1/2 10024-964 3/4 10024-965 1" 100

#10-24 dIAMeTeR24-966 1/2 10024-967 3/4 10024-968 1" 100

#10-32 dIAMeTeR24-969 1/2 10024-970 3/4 10024-971 1" 100

PAn HeAd#6-32 dIAMeTeR

Part # Size Pkg Qty24-731 1/4 10024-732 3/8 10024-733 1/2 10024-734 3/4 10024-735 1" 10024-1001 1-1/4 10024-1002 1-1/2 100

#8-32 dIAMeTeR24-736 1/4 10024-737 3/8 10024-738 1/2 10024-739 3/4 10024-740 1" 10024-742 1-1/2 100

#10-24 dIAMeTeR24-743 3/8 10024-744 1/2 10024-745 3/4 10024-746 1" 10024-747 1-1/4 10024-748 1-1/2 100

#10-32 dIAMeTeR24-749 3/8 10024-750 1/2 10024-751 3/4 10024-752 1" 10024-753 1-1/4 10024-754 1-1/2 100

1/4-20 dIAMeTeRPart # Size Pkg Qty24-755 3/8 10024-756 1/2 10024-757 3/4 10024-758 1" 10024-759 1-1/4 10024-760 1-1/2 10024-761 2" 100


Part # Size Pkg Qty24-762 1/4 10024-763 3/8 10024-764 1/2 10024-765 3/4 10024-766 1" 100

#8-32 dIAMeTeR24-767 1/4 10024-768 3/8 10024-769 1/2 10024-770 3/4 10024-771 1" 10024-772 1-1/4 10024-773 1-1/2 100

#10-24 dIAMeTeR24-775 1/2 10024-776 3/4 10024-777 1" 10024-778 1-1/4 10024-779 1-1/2 100

#10-32 dIAMeTeR24-780 3/8 10024-781 1/2 10024-782 3/4 10024-783 1" 10024-784 1-1/4 10024-785 1-1/2 100

1/4-20 dIAMeTeR24-786 1/2 10024-787 3/4 10024-788 1" 10024-789 1-1/4 10024-790 1-1/2 100

TRUSS HeAd#6-32 dIAMeTeR

Part # Size Pkg Qty24-528 3/8 10024-529 1/2 10024-530 3/4 10024-531 1" 100

#8-32 dIAMeTeR 24-532 1/4 10024-534 1/2 10024-535 3/4 10024-536 1" 100

#10-24 dIAMeTeR24-539 1/2 10024-540 3/4 10024-541 1" 100


Thumb Screws

Cold headed one piece screw used where the fastener is frequently adjusted manually (without driver or wrench). Shoulder pattern type allows flush seating with mating surface, avoids over-tightening and stripped threads. Tensile strength: 48,000 psi minimum. Made from low carbon steel. zinc finish

Part Pkgnumber Size Qty25-484 6-32 x 3/4 10025-462 8-32 x 1/2 10025-486 8-32 x 3/4 10025-463 8-32 x 1" 10025-487 10-24 x 1/2 10025-464 10-24 x 1" 10025-466 10-24 x 1-1/2 10025-491 10-32 x 3/4 10025-493 10-32 x 1-1/2 5025-467 1/4-20 x 1/2 5025-496 1/4-20 x 3/4 5025-497 1/4-20 x 1-1/2 5025-471 1/4-20 x 2" 5025-472 1/4-20 x 2-1/2 25

25-510 6-32 x 3/4 10025-511 8-32 x 1/2 10025-512 8-32 x 3/4 10025-465 10-24 x 1" 10025-516 10-32 x 3/4 10025-519 1/4-20 x 1/2 5025-520 1/4-20 x 3/4 5025-473 1/4-20 x 2-1/2 25

Shoulder Pattern

Plain Pattern

Floorboard ScrewsTorx® drive

Flat head, type-F self tapping screws with genuine Torx® drive for positive torque. Eliminates cam out and other drive problems. Increases efficiency and reduces fastening costs. 82° countersunk head. Black phosphate finish. Pkg. Qty. 100 each.

Part drive drillnumber Size Size Size 1/4-20 diameter24-397 1-1/2 T30 #224-398 2" T30 #224-399 2-1/2 T30 #224-400 3" T30 #224-402 3-1/2 T30 #2 5/16-18 diameter24-403 2-1/2 T40 K24-404 3" T40 K

Length measured overall.Available 8-32 thur 1/2" Diameter

Phillips Floorboard Screws

Length

1/4-20 Diameter. Type “F” Point. zinc finish. Pkg. Qty. 100 each.

Part drive drillnumber Size Size Size24-393 2" #3 #224-394 2-1/2 #3 #2Available 2-56 thur 1/2 diameter in Stainless

or Black Oxide.

Header-Tek Screws

Cutting wings ream the wood, then "tear off" ahead of self-tapping

threads!

Self-drills up to 1/4" thick steel. Designed for wood to steel header installations. 82° countersunk head. Phillips flat head. zinc finish. Pkg. Qty. 100 each.

Part drivenumber Size Size24-405 12-24 x 2" #324-401 1/4-20 x 2-3/4" #3

Length measured overall.

Hex Trim Screws

The preferred design for high-volume assembly work, where pneumatic equipment is used to drive the screw. Made of low carbon steel. zinc finish.

Part Pkgnumber Size Qty25-382 10-24 x 1/2 10025-383 10-24 x 3/4 10025-384 10-24 x 1" 10025-385 10-32 x 1/4 10025-386 10-32 x 1/2 10025-387 10-32 x 3/4 10025-388 10-32 x 1" 10025-389 10-32 x 1-1/4 100Stainless Finish25-383-SS 10-24 x 3/4 10025-386-SS 10-32 x 1/2 10025-387-SS 10-32 x 3/4 100

Length measured from under head.Note: Stocked in several styles including indented, slotted, washer type or any combination of those head styles. Regretfully, we cannot guarantee shipment of any specific head style.



Type-F Thread CuttingFor use in heavy gauge metal. Hardness: Rc38. zinc finish.

PAn SLOTTed#6-32 dIAMeTeR dRILL SIZe #34

Part # Size Pkg Qty24-340 1/2 10024-341 3/4 100#8-32 dIAMeTeR dRILL SIZe 9/64"

24-343 1/4 10024-344 3/8 10024-345 1/2 10024-346 3/4 100#10-24 dIAMeTeR dRILL SIZe 5/32"

24-348 3/8 10024-349 1/2 1001/4-20 dIAMeTeR dRILL SIZe 7/32"

24-352 1/2 10024-353 5/8 100

Hex WASHeR#6-32 dIAMeTeR dRILL SIZe #34

24-358 1/2 10024-359 3/4 100#8-32 dIAMeTeR dRILL SIZe 9/64"

24-360 3/8 10024-361 1/2 10024-363 3/4 10024-364 1" 100#10-24 dIAMeTeR dRILL SIZe 5/32"

24-366 3/8 10024-367 1/2 100

1/4-20 dIAMeTeR dRILL SIZe 7/32"

24-376 3/8 10024-377 1/2 10024-378 5/8 10024-379 3/4 10024-381 1" 10024-382 1-1/4 100

12-24 dIAMeTeR dRILL SIZe 3/16"

24-372 1/2 10024-373 3/4 10024-374 1" 100

5/16-18 dIAMeTeR dRILL SIZe I

24-384 1/2 10024-385 3/4 10024-386 1" 10024-387 1-1/4 100


24-390 1" 10024-391 1-1/4 100

drive Screws(Thread Forming Screws or Drive Rivets)

For permanent fastening in metals and plastics. Must be forced under pressure or tapped in hole with a hammer. AISI 1016-1024 hardened steel. Round head ASA Type U. Hardness: RC 45. zinc finish. Pkg. 100 each.Part drill number Size Size24-700 4 x 1/4 3724-701 4 x 3/8 3724-703 6 x 3/8 31

drywall Screws

Phillips bugle head, fine threads, genuine Twinfast sharp point. Hard-ened steel. Black phosphate finish. Length measured overall. SOLD IN FULL PACKAGES ONLY.

#6 dIAMeTeRPart # Size Pkg Qty24-690 1" 10024-792 1-1/8 10024-691 1-1/4 10024-692 1-5/8 10024-693 2" 10024-793 2-1/4 100

#8 dIAMeTeRPart # Size Pkg Qty24-694 2-1/2 10024-695 3" 100

#6 dIAMeTeRPart # Size Pkg Qty24-690 1" 5LB(1570)

24-792 1-1/8 5LB(1455)

24-691 1-1/4 5LB(1340)

24-692 1-5/8 5LB(1060)

24-693 2" 5LB(890)

24-793 2-1/4 5LB(770)

#8 dIAMeTeRPart # Size Pkg Qty24-694 2-1/2 5LB(525)

24-695 3" 5LB(425)

deck Screws

Phillips bugle head, coarse threads. Hardened steel. Used on exterior wood decks and building projects. Length measured overall. SOLD IN FULL PACKAGES ONLY.

#6 dIAMeTeRPart # Size Pkg Qty24-795 1-1/4 10024-796 1-5/8 10024-797 2" 100

#8 dIAMeTeRPart # Size Pkg Qty24-798 2-1/2 10024-799 3" 100


24-813 1-5/8 5LB(1060)

24-814 2" 5LB(890)


24-816 3" 5LB(425)

Self-drilling drywall Screws

Self-drilling point fastens to metal studs up to 12 gauge (.105"). Phillips bugle head, fine threads. Hardened steel. Black phosphate finish.

#6 dIAMeTeRPart # Size Pkg Qty24-006 1" 10024-008 1-1/4 10024-013 1-5/8 10024-014 1-7/8 100

#8 dIAMeTeRPart # Size Pkg Qty24-015 2-3/8 10024-018 2-5/8 100


Steel Wood ScrewsSharp threads and points. Flat head screws have 82° angle. 1018 low carbon steel.

Bright zinc finish. Pkg: 100

FLAT SLOTTed#6 dIAMeTeR

Part # Size Pkg Qty18-340 3/8 10018-011 1/2 10018-013 3/4 10018-015 1" 10018-018 1-3/4 10018-019 2" 100

#8 dIAMeTeRPart # Size Pkg Qty18-030 3/8 10018-031 1/2 100

#10 dIAMeTeRPart # Size Pkg Qty18-044 1/2 10018-047 1" 10018-048 1-1/4 10018-049 1-1/2 10018-051 2" 10018-052 2-1/4 100

#12 dIAMeTeRPart # Size Pkg Qty18-062 1-1/2 10018-063 1-3/4 10018-064 2" 10018-065 2-1/4 10018-067 2-3/4 10018-070 4" 100

#14 dIAMeTeRPart # Size Pkg Qty18-072 1" 10018-076 2" 10018-077 2-1/4 10018-079 3" 10018-080 3-1/2 100

FLAT PHILLIPS#6 dIAMeTeR

Part # Size Pkg Qty18-426 1/2 10018-165 3/4 10018-166 1" 100

#8 dIAMeTeRPart # Size Pkg Qty18-430 3/4 10018-169 1" 10018-431 1-1/4 10018-170 1-1/2 10018-433 2-1/2 100

#10 dIAMeTeRPart # Size Pkg Qty18-436 1-1/4 10018-172 1-1/2 100

#12 dIAMeTeRPart # Size Pkg Qty18-441 1-1/2 10018-442 2" 10018-443 2-1/2 100

#14 dIAMeTeRPart # Size Pkg Qty18-446 3/4 10018-447 1" 10018-450 2" 10018-451 2-1/2 10018-452 3" 100

ROUnd SLOTTed#6 dIAMeTeR

Part # Size Pkg Qty18-110 1-3/4 10018-111 2" 10018-112 2-1/2 100

#8 dIAMeTeRPart # Size Pkg Qty18-118 3/4 10018-121 1-1/4 100

#10 dIAMeTeRPart # Size Pkg Qty18-132 1/2 10018-136 1-1/2 10018-137 1-3/4 10018-139 2-1/4 100

#12 dIAMeTeRPart # Size Pkg Qty18-147 1-1/2 10018-148 1-3/4 10018-150 2-1/4 10018-153 3-1/2 10018-154 4" 100

#14 dIAMeTeRPart # Size Pkg Qty18-155 3/4 10018-159 2" 10018-160 2-1/2 10018-161 3" 10018-162 3-1/2 10018-163 4" 100



Slotted Sheet Metal ScrewsType A/AB point. Fully hardened steel. Sharp threads and points. Flat head screws have 82° angle.

Bright zinc finish. Pkg: 100

PAn HeAd#4 dIAMeTeR

Part # Size Pkg Qty24-047 1/4 10024-048 3/8 10024-049 1/2 10024-050 5/8 10024-051 3/4 100

#6 dIAMeTeRPart # Size Pkg Qty24-053 1/4 10024-054 3/8 10024-055 1/2 10024-056 5/8 10024-057 3/4 10024-058 7/8 10024-059 1" 10024-060 1-1/4 10024-061 1-1/2 10024-062 2" 100

#7 dIAMeTeRPart # Size Pkg Qty24-063 3/8 10024-064 1/2 10024-065 5/8 10024-066 3/4 10024-067 1" 10024-068 1-1/4 10024-069 1-1/2 100

#8 dIAMeTeRPart # Size Pkg Qty24-070 1/4 10024-071 3/8 10024-072 1/2 10024-073 5/8 10024-074 3/4 10024-075 7/8 10024-076 1" 10024-077 1-1/4 10024-078 1-1/2 10024-079 1-3/4 10024-080 2" 10024-081 2-1/2 100

#10 dIAMeTeRPart # Size Pkg Qty24-083 3/8 10024-084 1/2 10024-085 5/8 10024-086 3/4 10024-087 7/8 10024-088 1" 10024-089 1-1/4 10024-090 1-1/2 10024-091 1-3/4 10024-092 2" 10024-093 2-1/2 10024-094 3" 100

#12 dIAMeTeRPart # Size Pkg Qty24-095 1/2 10024-096 5/8 10024-097 3/4 10024-098 7/8 10024-099 1" 10024-100 1-1/4 10024-101 1-1/2 10024-102 1-3/4 10024-103 2" 10024-104 2-1/2 10024-105 3" 100

#14 dIAMeTeRPart # Size Pkg Qty24-106 1/2 10024-107 5/8 10024-108 3/4 10024-109 7/8 10024-110 1" 10024-111 1-1/4 10024-112 1-1/2 10024-113 1-3/4 10024-114 2" 10024-115 2-1/2 10024-116 3" 100

FLAT HeAd#6 dIAMeTeR

Part # Size Pkg Qty24-124 1/4 10024-125 3/8 10024-126 1/2 10024-127 5/8 10024-128 3/4 10024-129 1" 10024-130 1-1/4 10024-131 1-1/2 100

#8 dIAMeTeRPart # Size Pkg Qty24-133 3/8 10024-134 1/2 10024-135 5/8 10024-136 3/4 10024-137 7/8 10024-138 1" 10024-139 1-1/4 10024-140 1-1/2 10024-142 2-1/2 100

#12 dIAMeTeRPart # Size Pkg Qty24-154 1/2 10024-490 5/8 10024-155 3/4 10024-156 1" 10024-160 2" 100

#14 dIAMeTeRPart # Size Pkg Qty24-162 5/8 10024-163 3/4 10024-165 1-1/4 10024-167 1-3/4 10024-169 2-1/2 10024-170 3" 100

#10 dIAMeTeRPart # Size Pkg Qty24-143 3/8 10024-144 1/2 10024-145 5/8 10024-146 3/4 10024-147 1" 10024-148 1-1/4 10024-152 2-1/2 100


PAn HeAd#6 dIAMeTeR

Part # Size Pkg Qty24-258 1/4 10024-259 3/8 10024-260 1/2 10024-261 5/8 10024-262 3/4 10024-263 1" 10024-264 1-1/4 10024-265 1-1/2 100

#8 dIAMeTeRPart # Size Pkg Qty24-267 1/4 10024-268 3/8 10024-269 1/2 10024-270 5/8 10024-271 3/4 10024-497 7/8 10024-272 1" 10024-273 1-1/4 10024-274 1-1/2 10024-275 1-3/4 100

#12 dIAMeTeRPart # Size Pkg Qty24-498 1/2 10024-286 5/8 10024-287 3/4 10024-288 1" 10024-289 1-1/4 10024-290 1-1/2 100

#14 dIAMeTeRPart # Size Pkg Qty24-291 1/2 10024-292 5/8 10024-293 3/4 10024-294 7/8 10024-295 1" 10024-296 1-1/4 10024-297 1-1/2 10024-298 1-3/4 10024-299 2" 100

#10 dIAMeTeRPart # Size Pkg Qty24-276 3/8 10024-277 1/2 10024-278 5/8 10024-279 3/4 10024-280 7/8 10024-281 1" 10024-282 1-1/4 10024-283 1-1/2 10024-284 1-3/4 10024-285 2" 100

Phillips Sheet Metal ScrewsType A/AB point. Fully hardened steel. Sharp threads and points. Flat

head screws have 82° angle. Bright zinc finish.

#6 dIAMeTeRPart # Size Pkg Qty24-235 1/2 10024-236 5/8 10024-237 3/4 100

#8 dIAMeTeRPart # Size Pkg Qty24-239 5/8 10024-240 3/4 10024-241 1" 10024-242 1-1/4 10024-243 1-1/2 100

#12 dIAMeTeRPart # Size Pkg Qty24-251 3/4 10024-252 1" 10024-253 1-1/4 10024-254 1-1/2 100

#10 dIAMeTeRPart # Size Pkg Qty24-244 1/2 10024-246 3/4 10024-247 1" 10024-248 1-1/4 10024-249 1-1/2 10024-250 2" 100

#14 dIAMeTeRPart # Size Pkg Qty24-255 1" 100

FLAT HeAd#4 dIAMeTeR

Part # Size Pkg Qty24-499 3/8 100

Length measured from under head.


Square drive Screws

(RobertsonTM Drive Screws)Deep square recess for excel-lent torque and non-slip driving. This relatively tamper proof screw ideal for security system installa-tions.Pan Head Sheet Metal

ScrewsType A point. Zinc finish.

#6 dIAMeTeR BIT #1

Part # Size Pkg Qty24-913 3/4 10024-914 1" 100

#8 dIAMeTeR BIT #2

24-915 1/2 10024-916 3/4 10024-917 1" 10024-918 1-1/4 10024-919 1-1/2 100

#10 dIAMeTeR BIT #2

24-920 1/2 10024-921 3/4 10024-922 1" 10024-924 1-1/2 10024-925 2" 100

Flat Head Sheet Metal Screws

Type A point. Zinc finish.

#6 dIAMeTeR BIT #1

24-927 3/4 10024-928 1" 100

#8 dIAMeTeR BIT #2

24-929 3/4 100 24-932 1-1/2 100

#10 dIAMeTeR BIT #2

24-933 3/4 10024-934 1" 10024-936 1-1/2 100



Phillips Oval Hd. Sheet Metal ScrewsDeep phillips recess for non-slip driving. Sharp threads and points. Made from hardened steel. Use "reduced head" sizes when existing holes has been stripped. Pkg: 100 each.

ZInC#4 dIAMeTeR

Part # Size Pkg Qty24-505 1/4 10024-189 1/2 10024-507 5/8 10024-190 3/4 100

#6 dIAMeTeR24-193 3/8 10024-194 1/2 10024-195 5/8 10024-196 3/4 10024-197 7/8 10024-198 1" 10024-199 1-1/4 100

#8 dIAMeTeR24-201 1/2 10024-202 5/8 10024-205 1" 10024-206 1-1/4 10024-207 1-1/2 10024-208 1-3/4 10024-209 2" 10024-211 2-1/2 100

#10 dIAMeTeR24-213 1/2 10024-214 5/8 10024-215 3/4 10024-216 1" 10024-217 1-1/4 10024-218 1-1/2 10024-510 1-3/4 10024-513 2-1/2 100

#12 dIAMeTeR24-219 1/2 10024-221 3/4 10024-222 1" 10024-223 1-1/4 10024-224 1-1/2 100

#14 dIAMeTeR24-229 1" 10024-230 1-1/4 10024-231 1-1/2 100

RedUCed HeAd#8 dIAMeTeR #6 HeAd

24-844 7/8 10024-845 1" 100

#10 dIAMeTeR #6 HeAd24-854 1" 10024-858 1-1/2 100

#10 dIAMeTeR #8 HeAd24-560 1-1/2 100

CROMe#4 dIAMeTeR

Part # Size Pkg Qty24-866 1/2 10024-867 5/8 10024-868 3/4 100

#6 dIAMeTeR24-874 3/4 100

#8 dIAMeTeR24-881 3/4 100

#10 dIAMeTeR24-894 3/4 10024-896 1" 100


24-870 3/8 100

#8 dIAMeTeR #6 HeAd24-529 1/2 10024-530 5/8 10024-531 3/4 10024-533 1" 10024-534 1-1/4 10024-536 1-3/4 100

#10 dIAMeTeR #6 HeAd24-542 5/8 10024-543 3/4 10024-546 1-1/4 10024-548 1-1/2 100

#10 dIAMeTeR #8 HeAd24-555 3/4 10024-557 1" 100

BLACK OxIde#6 dIAMeTeR

24-12795 1/2 10024-12796 3/4 10024-12797 1" 10024-12798 1-1/4 100

#8 dIAMeTeR24-601 1/2 10024-602 3/4 10024-604 1-1/4 10024-605 1-1/2 100

#10 dIAMeTeR24-611 1/2 10024-612 3/4 10024-614 1-1/4 10024-615 1-1/2 100


24-606 1/2 10024-607 3/4 10024-608 1" 10024-609 1-1/4 10024-610 1-3/4 100

#10 dIAMeTeR #8 HeAd24-616 1/2 10024-617 3/4 10024-618 1" 10024-619 1-1/4 10024-620 1-1/2 100


One Way SecurityScrews

(Tamperproof Screws)

Round Head Sheet Metal ScrewsHardened steel. Type A point. Zinc finish.

#6 dIAMeTeR dRILL SIZe 3/32"

Part # Size Pkg Qty24-637 1/2 10024-638 3/4 100


24-639 1/2 10024-640 3/4 10024-641 1" 10024-642 1-1/4 100


24-643 1/2 10024-645 3/4 10024-646 1" 10024-648 1-1/2 100


24-649 1" 10024-650 1-1/2 100


Part # Size Pkg Qty24-309 1" 10024-310 1-1/4 10024-311 1-1/2 10024-312 2" 10024-313 2-1/2 10024-524 3" 100

Round Head Machine Screws Zinc finish.

#6-32 dIAMeTeR dRILL SIZe 3/32"

Part # Size Pkg Qty24-653 1/2 10024-660 3/4 100


24-661 3/4 10024-662 1" 10024-663 1-1/2 100


24-664 3/4 10024-665 1" 10024-666 1-1/2 100


24-667 3/4 10024-668 1" 100


24-670 3/4 10024-671 1" 10024-672 1-1/2 100

Length

Length

Length

Construction ScrewsWeather Gard® Bond Seal Washers • Hardened carbon steel • Sil-

ver Sentri long-life finish*Fasten building side panels as well as any application requiring a water tight seal. Pre assembled and ready to use. Weather Gard bond sealing washers are composite of metal and high quality EPDM rubber securely bonded together to provide excellent sealing performance. Dish shape provides a low profile installation.

#14 Type A Tapping Screw with Bond Sealing Washer

3/8" head size. Galvanizes 5/8 O.D. sealing washer. zinc plated.

#14 drill Screws with Bond Sealing

Washer

Galvanized 5/8 O.D. sealing washer. Silver Sentri long-lifefinish*.

#14 dIAMeTeR HeAd SIZe 3/8"

Part # Size Pkg Qty24-525 3/4 10024-526 1" 10024-314 1-1/4 10024-315 1-1/2 10024-316 2" 10024-406 2-1/2 100

WOOdGRIPTM drill Screws

Faster and stronger than nails! No hammer damage on panels or substructures. Self-drilling screw for metal roofing and siding to wooden structures. Galvanized 1/2" O.D. sealing washerSilver Sentri long-life finish*.


Part # Size Pkg Qty24-956 1" 10024-957 1-1/2 10024-958 2" 10024-959 2-1/2 10024-960 3" 100



Sheet Metal ScrewsHex Head

Unslotted, hex indented head. Fully hardened. Type A point. Sharp threads. Bright zinc finish.


Part # Size Pkg Qty24-411 3/8 10024-412 1/2 10024-413 5/8 10024-414 3/4 10024-415 1" 100


24-418 1/2 10024-419 5/8 10024-420 3/4 10024-422 1" 10024-423 1-1/4 10024-424 1-1/2 100


24-427 3/4 10024-429 1" 10024-431 1-1/2 100


24-517 1/2 10024-519 3/4 100


24-435 3/4 10024-437 1" 10024-438 1-1/4 10024-439 1-1/2 100 24-441 2" 100

5/16 dIAMeTeR HeAd SIZe 1/2"

24-444 3/4 10024-446 1" 10024-447 1-1/4 10024-448 1-1/2 100 24-450 2" 100


24-451 3/4 5024-452 1" 5024-453 1-1/4 5024-4545 1-1/2 50

Hex Washer Head Unslotted, attached washer. Fully hardened. Type A point. Sharp threads. Bright zinc finish.


Part # Size Pkg Qty 24-171 1/2 10024-172 5/8 100


24-521 5/8 10024-174 3/4 100


24-523 3/4 100


24-180 3/4 10024-181 1" 10024-182 1-1/4 10024-183 1-1/2 100


24-184 5/8 10024-185 3/4 10024-186 1" 10024-188 1-1/2 100

UndeRCUT HeAdALWAyS SeATS FLUSH

TWIn LeAd THReAdS CUT InSTALLATIOn TIMe In HALF!

Slotted Hex Washer Head Type A

Fully hardened. Sharp threads. Bright zinc finish.


Part # Size Pkg Qty24-456 3/8 10024-457 1/2 10024-459 3/4 10024-460 1" 10024-461 1-1/4 10024-462 1-1/2 100


24-463 3/8 10024-464 1/2 10024-466 3/4 10024-467 1" 10024-468 1-1/4 100


24-471 1/2 10024-472 5/8 10024-473 3/4 10024-474 1" 10024-475 1-1/4 10024-476 1-1/2 100


24-477 1/2 10024-478 5/8 10024-479 3/4 10024-480 1" 10024-481 1-1/4 10024-482 1-1/2 100

Zip-In drill Screws

Sharp pointed, self-piercing screw that drills its own hole in metal up to 1/16" (.0625"). Hex washer head, slotted. Heat-treated steel. Bright zinc finish. Head Size 1/4"


Part # Size Pkg Qty 24-655 7 x 1/2 10024-656 8 x 1/2 10024-657 8 x 3/4 10024-659 10 x 3/4 100

Magnetic nutsetters

For hex screws and nuts. Magnetic to hold screw while positioning. Made of shock resistant tool steel and heat-treated for maximum strength and hardness. ALL 1/4" HEX SHANK, 2-9/16" LONG Part # Size Pkg Qty 6771 1/4 106772 5/16 106773 3/8 10


Self-drilling Teks® Screws

Pan Head Phillips

Drills, taps, and fastens in one operation. Hardened steel. zinc finish. Pkg: 100 each

#6 dIAMeTeR Max. ThickPart # Size drillable24-939 1/2 .100(12GA)24-940 5/8 .100(12GA)24-941 3/4 .100(12GA)24-942 1" .100(12GA)

#8 dIAMeTeR24-333 1/2 .100(12GA)24-334 3/4 .100(12GA)24-944 1" .100(12GA)24-946 1-1/2 .100(12GA)

#10 dIAMeTeR24-335 1/2 .175(7GA)24-947 5/8 .175(7GA)24-336 3/4 .175(7GA)24-337 1" .175(7GA)

Hex Washer Head

#6-20 dIAMeTeR Hex SIZe 1/4"

Max. ThickPart # Size drillable24-950 3/8 .100(12GA)24-951 1/2 .100(12GA)


24-332 1/2 .100(12GA)24-317 3/4 .100(12GA)24-318 1" .100(12GA)


24-319 1/2 .175(7GA)24-320 5/8 .175(7GA)24-321 3/4 .175(7GA)24-322 1" .175(7GA)24-323 1-1/4 .175(7GA)24-324 1-1/2 .175(7GA)24-952 2" .175(7GA)


24-325 3/4 .175(7GA)24-326 1" .175(7GA)24-327 1-1/2 .175(7GA)24-953 2" .175(7GA)


24-328 3/4 .25(3GA)24-329 1" .25(3GA)24-330 1-1/4 .25(3GA)24-331 1-1/2 .25(3GA)24-954 2" .25(3GA)24-322 1" .175(7GA)

Self-drilling Wall Liner

ScrewsPhillips Wafer Head

Use wall liner screws for attaching plywood to steel. Commonly used for wall liners inside trailers. Wafer head seats flush. No. 3 self-drilling tek point drills metals up to .175" thick. Head diameter: 1/2". Made from hardened steel. Bright zinc finish. Pkg Qty 100.

#10-24 dIAMeTeRPart # Size Plywood24-696 1" 3/8"24-697 1-1/4 1/2"24-698 1-1/2 3/4"




Section 4 Nuts &

WashersBBushings

Machinery 4-6

FFlat Washers. See Washers

HHex Nuts

Grade 5 4-1

LLock Washers. See Washers

NNuts

2-Way Lock 4-3Acorn 4-3Air Cleaner Wing 4-4All Steel Lock 4-2Cap 4-3Carburetor Wing 4-4Castle 4-3Esna 4-2Finished Hex 4-1Flange 4-2Grade 2H 4-4Grade C (8) Lock 4-2Heavy 4-3High 4-4Jam 4-1Kep 4-2Left Hand 4-4Locking 4-3Machine Screw 4-3Nylon Insert, Reg 4-2Nylon Insert, Thin 4-2Oval Lock 4-2Prong Type 4-3Push-On 4-4Reversible Lock 4-3Self Threading 4-4

Serrated Lock 4-2Slotted 4-3Spinlock 4-2Square 4-1Tee 4-3Thick 4-4Truck U-Bolt 4-4Whiz-Lock 4-2Wing 4-4

PPush-on Retainers 4-4

RRetainers

Flat Push-On 4-4

SShims

Machinery Bushings 4-6

WWashers 4-5, 4-6

Alloy Lock 4-6Countersunk 4-5, 4-6External Lock 4-6Extra Thick Flat 4-5Fender 4-5Finishing 4-5Flat Machine Screw 4-5Flat USS/SAE 4-5Hi-Collar Lock 4-6Internal Lock 4-6Lock 4-6Machinery Bushings 4-6Machine Screw 4-5Oversize 4-5Plaster 4-5Shakeproof 4-6Socket Cap Screw 4-6Spacers 4-6Spring 4-6Star 4-6Thick Fender 4-5Thick Flat 4-5Tooth 4-6Trim 4-5Wrought 4-5



Basic dimensional Information for Finished Hex nutsDimensions for Hex Nuts conform to ANSI/ASME B18.2.2

Threads Per Inch Basic Thickdiam. UnC UnF W.A.F.2 -ness3

1/4 -20 -28 7/16 7/325/16 -18 -24 1/2 17/643/8 -16 -24 9/16 21/647/16 -14 -20 11/16 3/81/2 -13 -20 3/4 7/169/16 -12 -18 7/8 31/645/8 -11 -18 15/16 35/643/4 -10 -16 1-1/8 41/647/8 -9 -14 1-5/16 3/41” -8 -14 1-1/2 55/641-1/8 -7 -12 1-11/16 31/321-1/4 -7 -12 1-7/8 1-1/161-3/8 -6 -12 2-1/16 1-11/641-1/2 -6 -12 2-1/4 1-9/32

2Width across flats.

3Thickness does not include Grade 9 Hex Nuts.

USS Flat Washer dimensionsBolt Size Washer I.d. Washer O.d. Min Thickness Max Thickness

3/16 1/4 9/16 .036 .065

1/4 5/16 3/4 .051 .080

5/16 3/8 7/8 .064 .104

3/8 7/16 1" .064 .104

7/16 1/2 1-1/4 .064 .104

1/2 9/16 1-3/8 .086 .132

9/16 5/8 1-15/32 .086 .132

5/8 3/4 1-3/4 .108 .160

3/4 7/8 2" .122 .177

7/8 1" 2-1/4 1.36 .192

1" 1-1/8 2-1/2 .136 .192

1-1/8 1-1/4 2-3/4 .136 .192

1-1/4 1-1/2 3" .136 .192

1-1/2 1-5/8 3-1/2 .153 .213

1-5/8 1-3/4 3-3/4 .153 .213

1-3/4 1-7/8 4" .153 .213

Sae Flat Washer dimensionsBolt Size Washer I.d. Washer O.d. Min Thickness Max Thickness

#4 1/8 5/16 .036 .045

#6 5/32 3/8 .036 .065

#8 3/16 7/16 .036 .065

#10 7/32 1/2 .036 .065

#12 1/4 9/16 .051 .080

1/4 9/32 5/8 .051 .080

5/16 11/32 11/16 .051 .080

3/8 13/32 13/16 .051 .080

7/16 15/32 59/64 .051 .080

1/2 17/32 1-1/16 .074 .121

9/16 19/32 1-5/32 .074 .121

5/8 21/32 1-5/16 .074 .121

3/4 13/16 1-15/32 .108 .160

7/8 15/16 1-3/4 .108 .160

1" 1-1/16 2" .108 .160

1-1/8 1-1/4 2-1/4 .136 .192

1-1/4 1-5/16 2-1/2 .136 .192

1-1/2 1-9/16 3" .136 .192



IFI standard grade marking* IFI standard grade marking*

Heat Treated Grade 5 Finished Hex nuts

Proof load: 120,000 PSI minimum. Heat-treated low carbon steel. Meets or exceeds SAE J995 re-quirements. Rockwell Hardness: C32 Max. For use with Grade 2 or Grade 5 fasteners. zinc finish.

USSPart Pkgnumber Size Qty08-2010 1/4 10008-2020 5/16 10008-2030 3/8 10008-2040 7/16 10008-2050 1/2 10008-2060 9/16 5008-2070 5/8 5008-2080 3/4 2508-2090 7/8 2508-2100 1" 2508-2110 1-1/8 2508-2120 1-1/4 2508-2140 1-1/2 25

SAePart Pkgnumber Size Qty08-1010 1/4 10008-1020 5/16 10008-1030 3/8 10008-1040 7/16 10008-1050 1/2 10008-1060 9/16 5008-1070 5/8 5008-1080 3/4 2508-1090 7/8 2508-1100 1" 2508-1110 1-1/8 2508-1120 1-1/4 2508-1140 1-1/2 25

Alloy Grade 8 Finished Hex nuts

Proof load: 150,000 PSI minimum. High strength heat-treated alloy steel. Meets or exceeds SAE J995 requirements. Rockwell Hardness: C36 Max. For use with Grade 8 fasteners. zinc gold dichromate finish or Black

USS - Zinc FinishPart Pkgnumber Size Qty36-2010 1/4 10036-2020 5/16 10036-2030 3/8 10036-2040 7/16 10036-2050 1/2 10036-2060 9/16 5036-2070 5/8 5036-2080 3/4 2536-2090 7/8 2536-2100 1" 2536-2110 1-1/8 2536-2120 1-1/4 2536-2140 1-1/2 25

USS - Black FinishPart Pkgnumber Size Qty36-2010B 1/4 10036-2020B 5/16 10036-2030B 3/8 10036-2040B 7/16 10036-2050B 1/2 10036-2060B 9/16 5036-2070B 5/8 5036-2080B 3/4 25

SAe - Zinc FinishPart Pkgnumber Size Qty36-1010 1/4 10036-1020 5/16 10036-1030 3/8 10036-1040 7/16 10036-1050 1/2 10036-1060 9/16 5036-1070 5/8 5036-1080 3/4 2536-1090 7/8 2536-1100 1" 2536-1110 1-1/8 2536-1120 1-1/4 2536-1140 1-1/2 25

Square nuts

Coarse thread only. Low carbon steel. zinc finish up to 1" diam-eter. Sizes over 1" are plain finish.

Part Thick Pkgnumber Size -ness Qty03-068 8-32 0.130 10003-069 10-24 0.130 10003-070 10-32 0.161 10003-071 1/4-20 7/32 10003-072 5/16-18 17/64 10003-073 3/8-16 21/64 10003-074 7/16-14 3/8 10003-075 1/2-13 7/16 10003-077 5/8-11 35/64 5003-078 3/4-10 21/32 2503-079 7/8-9 49/64 2503-080 1"-8 7/8 2503-081 1-1/8-7 1" 1003-082 1-1/4-7 1-3/32 10

Hex Jam nuts

Approximately 2/3 the thickness of a full finished hex nut. Low carbon steel, zinc finish.

USSPart Thick Pkgnumber Size -ness Qty03-041 1/4 5/32 10003-042 5/16 3/16 10003-043 3/8 7/32 10003-044 7/16 1/4 10003-045 1/2 5/16 10003-046 9/16 5/16 5003-047 5/8 3/8 5003-048 3/4 27/64 2503-049 7/8 31/64 2503-050 1" 35/64 2503-051 1-1/8 39/64 1003-052 1-1/4 23/32 1003-053 1-1/2 27/32 10

SAe03-054 1/4 5/32 10003-055 5/16 3/16 10003-056 3/8 7/32 10003-057 7/16 1/4 10003-058 1/2 5/16 10003-059 9/16 5/16 5003-060 5/8 3/8 5003-061 3/4 27/64 2003-062 7/8 31/64 20



Grade C OvalLock nuts

(All-steel Grade 8 Lock Nuts)Heat-treated alloy steel. This re-usable lock nut is rated for high prevailing torques. Withstands higher temperatures than nylon insert locking nuts. Use with grade 5 or grade 8 fasteners. zinc and waxed finish.

USSPart Pkgnumber Size Qty36-4001 1/4 10036-4002 5/16 10036-4003 3/8 10036-4004 7/16 10036-4005 1/2 5036-4006 9/16 5036-4007 5/8 5036-4008 3/4 2536-4009 7/8 2536-4010 1" 25

SAe36-4101 1/4 10036-4102 5/16 10036-4103 3/8 10036-4104 7/16 10036-4105 1/2 10036-4106 9/16 5036-4107 5/8 5036-4108 3/4 2536-4109 7/8 2536-4110 1" 25

Kep® Lock nuts

Attached, free-spinning lockwash-er. zinc finish.

USSPart Pkgnumber Size Qty03-094 #4 10003-096 #6 10003-098 #8 10003-100 #10 10003-101 1/4 10003-102 5/16 10003-103 3/8 100

SAe03-104 #10 10003-105 1/4 10003-106 5/16 10003-107 3/8 100

nylon Insert Lock nuts

Low carbon steel. Leak resistant. Reusable. Temperature limit: +250°F. zinc finish

USSPart Thick Pkgnumber Size -ness Qty36-4904 #4 9/64 10036-4906 #6 3/16 10036-4908 #8 15/64 10036-4910 #10 1/4 10036-4912 #12 9/32 10036-5001 1/4 5/16 10036-5002 5/16 11/32 10036-5003 3/8 29/64 10036-5004 7/16 29/64 10036-5005 1/2 19/32 10036-5006 9/16 21/32 5036-5007 5/8 3/4 5036-5008 3/4 7/8 2536-5009 7/8 1" 2536-5010 1" 1-5/64 2536-5011 1-1/8 1-3/16 1036-5012 1-1/4 1-13/32 1036-5014 1-1/2 1-5/8 10

SAe36-5100 #10 1/4 10036-5101 1/4 5/16 10036-5102 5/16 11/32 10036-5103 3/8 29/64 10036-5104 7/16 29/64 10036-5105 1/2 19/32 10036-5106 9/16 21/32 5036-5107 5/8 3/4 5036-5108 3/4 7/8 2536-5109 7/8 1" 2536-5110 1" 1-5/64 2536-5111 1-1/8 1-3/16 1036-5112 1-1/4 1-13/32 1036-5114 1-1/2 1-5/8 10

Thin Pattern nylon Insert Lock nuts

Low carbon steel. Leak resistant. Reusable. zinc finish.

USSPart Thick Pkgnumber Size -ness Qty36-6001 1/4-20 .0.218" 10036-6002 5/16-18 0.265" 10036-6003 3/8-16 0.281" 10036-6004 7/16-14 0.328" 10036-6005 1/2-13 0.328" 100

SAe36-6101 1/4-28 0.218" 10036-6102 5/16-24 0.265" 10036-6103 3/8-24 0.281" 10036-6104 7/16-20 0.328" 10036-6105 1/2-20 0.328" 10036-6106 9/16-18 0.362" 5036-6107 5/8-18 0.406" 5036-6108 3/4-16 0.421" 25

Spin-Lock Serrated Flange Lock nuts

("Whiz-Lock" Nuts)Hardened steel • zinc finish

USSPart Pkgnumber Size Qty03-209 #8 10003-210 #10 10003-211 1/4 10003-212 5/16 10003-213 3/8 10003-214 7/16 5003-215 1/2 50

SAe03-218 5/16 10003-219 3/8 100



Grade 8 Hex Flange Lock nuts

High strength design for use with frame bolts and out-of-round holes. Tensile Strength: 150,000 PSI. SAE J529K. Phosphate & oil finish.

USSPart Flange Pkgnumber Size dia. Qty9-223 3/8 13/16 509-224 1/2 1-5/64 259-225 5/8 1-11/32 259-620 3/4 1-9/16 10

SAe9-622 1/2 1-5/64 259-623 5/8 1-11/32 259-624 3/4 1-9/16 10

Hex Machine Screw nuts

Low carbon steel, zinc finish.Pkg Qty: 100

Part Thick number Size -ness W.A.F.*01-4020 2-56 0.066 3/1601-4040 4-40 0.098 1/401-4050 5-40 0.114 5/1601-4060 6-32 0.114 5/1601-4080 8-32 0.130 11/3201-4100 10-24 0.130 3/801-4110 10-32 0.130 3/801-4120 12-24 0.161 7/1601-4140 1/4-20 0.193 7/16

2-Way Reversible Lock nuts

Can be used from either side of nut. Low carbon steel. zinc finishPart Pkgnumber Size Qty36-3153 1/4-20 10036-3154 5/16-18 10036-3155 3/8-16 10036-3156 7/16-14 5036-3157 1/2-13 50

Thickness same as Finished Hex Nuts.

3-Prong* Tee nuts

Insert threads in wood without counter-boring.Drill hole to fit barrel size, then hammer in until flush. Low carbon steel. zinc finish.Part Barrel Pkgnumber Size diameter Qty03-222 8-32 0.208" 10003-223 10-24 0.243" 10003-224 10-32 (NF) 0.243" 10003-225 1/4-20 0.305" 10003-226 5/16-18 0.375" 5003-227 3/8-16 0.440" 50

* Occasionally supplied with 4-6 prongs.

Cap nuts

(Acorn Nuts) Low carbon steel. zinc finish

Part Pkgnumber Size W.A.F.* Qty03-108 6-32 5/16 10003-109 8-32 5/16 10003-110 10-24 3/8 10003-111 10-32 (NF) 3/8 10003-112 1/4-20 7/16 10003-113 5/16-18 9/16 10003-114 3/8-16 5/8 10003-115 1/2-13 3/4 5003-116 5/8-11 15/16 25

Hex Castle nuts

Low carbon steel. zinc finish through 3/4" diameter. Fine thread (NF) only.Part Pkgnumber Size Qty03-141 1/4-28 10003-142 5/16-24 10003-143 3/8-24 10003-144 7/16-20 5003-145 1/2-20 5003-146 9/16-18 2503-147 5/8-18 2503-148 3/4-16 2503-149 7/8-14 1203-150 1"-14 12

Slotted Hex nuts

Low carbon steelzinc finish through 3/4" diameter

USSPart Pkgnumber Size Qty03-154 1/4 10003-155 5/16 10003-156 3/8 10003-157 7/16 5003-158 1/2 5003-159 9/16 2503-160 5/8 2503-161 3/4 2503-162 7/8 1203-163 1" 1203-164 1-1/8 103-165 1-1/4 1

SAe03-167 1/4 10003-168 5/16 10003-169 3/8 10003-170 7/16 5003-171 1/2 5003-172 9/16 2503-173 5/8 2503-174 3/4 2503-175 7/8 1203-176 1" 1203-177 1-1/8 1

Heavy Hex Full nuts

Low carbon steel.zinc finish.Coarse thread (NC) only.

Part Bolt Pkgnumber Size1 W.A.F.* Qty03-001 1/4-20 1/2 10003-002 5/16-18 9/16 10003-003 3/8-16 11/16 10003-004 7/16-14 3/4 10003-005 1/2-13 7/8 10003-007 5/8-11 1-1/16 5003-008 3/4-10 1-1/4 2503-009 7/8-9 1-7/8 2503-010 1"-8 1-5/8 2503-012 1-1/4-7 2" 10

1 Bolt size is also the approximate thickness dimension.



Grade 2H Heavy nuts

Heat treated steel for use with threaded studs on wheels and pipe flanges. Washer faced. zinc finish to 1" diameter. Coarse thread (NC)Part Bolt Pkgnumber Size1 W.A.F.* Qty03-021 1/4-20 1/2 10003-022 5/16-18 9/16 10003-023 3/8-16 11/16 10003-024 7/16-14 3/4 10003-025 1/2-13 7/8 10003-026 9/16-12 15/16 5003-027 5/8-11 1-1/16 5003-028 3/4-10 1-1/4 2503-029 7/8-9 1-7/8 2503-030 1"-8 1-5/8 2503-031 1-1/8-7 1-13/16 1003-032 1-1/4-7 2" 1003-035 1-1/8-82 1-13/16 1003-036 1-1/4-82 2" 1003-037 1-3/8-82 2-13/16 1003-038 1-1/2-82 2-3/8 10

1 Bolt size is also the approximate thickness dimension.2 -8 threads are normal B7 stud threads.

* W.A.F.: "Width Across Flats" (wrench size)

High nuts

Low carbon steel. Plain finish. Fine thread (NF) only.

Part Thick Pkgnumber Size -ness Qty03-083 3/8-24 17/32 10003-085 1/2-20 11/16 10003-087 5/8-18 27/32 5003-089 7/8-14 1-5/32 2503-090 1"-14 1-5/16 25

Left Hand Hex nuts

Low carbon steel. Plain finish Pkg: 1 each

Part USSnumber Size03-181 1/403-182 5/1603-183 3/803-184 7/1603-185 1/203-186 9/1603-187 5/803-188 3/403-189 7/803-190 1"03-191 1-1/803-192 1-1/4

Part SAenumber Size03-194 1/403-195 5/1603-196 3/803-197 7/1603-198 1/203-199 9/1603-200 5/803-201 3/403-202 7/803-203 1"03-204 1-1/803-205 1-1/4

Self Threading nuts

Plain finish.Part Pkgnumber Size Flang Qty03-284 1/8 17/32 10003-285 5/32 9/16 10003-286 3/16 5/8 10003-287 1/4 19/32 10003-288 .330 3/4 100

Flat Push-on Retainers

For use with unthreaded fasten-ers. zinc finish.

Wing nuts

Cold forged steel, zinc finish.USS

Part PkgSize numberSize Qty03-118 #6 10003-119 #8 10003-120 #10 10003-122 1/4 10003-123 5/16 10003-124 3/8 10003-125 7/16 5003-126 1/2 5003-127 5/8 2503-128 3/4 25

SAe03-129 #10 10003-130 1/4 100

Part Pkgnumber Size Qty03-243 1/16 10003-244 3/32 10003-245 1/8 10003-246 5/32 10003-247 3/16 10003-248 .237 10003-249 .240 10003-250 1/4 10003-251 5/16 10003-252 3/8 10003-253 1/2 100

Carburetor Wing nuts

Replaces most 1/4-20 OEM air cleaner nuts. Extruded steel with

zinc finish.Partnumber Size Pkg03-258 1/4-20 50

Pushnut Bolt Retainers

Use with coarse or fine thread bolts and studs. Plain finish.

Partnumber Size Pkg03-271 1/4 10003-272 5/16 10003-273 3/8 10003-274 7/16 10003-275 1/2 100



Part Pkgnumber Size Qty01-3000 3/16 10001-3010 1/4 10001-3020 5/16 10001-3030 3/8 10001-3040 7/16 10001-3050 1/2 10001-3060 9/16 5001-3070 5/8 5001-3080 3/4 2501-3090 7/8 2501-3100 1" 2501-3110 1-1/8 2501-3120 1-1/4 2501-3140 1-1/2 2501-3150 1-3/4 2501-3160 2" 25

USS Low CarbonFlat Washers

For Gr.2 or 5 Bolts. zinc Plated

SAe HardenedAlloy Flat Washers

For Gr.5 or 8 Bolts zinc Gold Dichromate PlatedPart Pkgnumber Size Qty36-3010 1/4 10036-3020 5/16 10036-3030 3/8 10036-3040 7/16 10036-3050 1/2 10036-3060 9/16 5036-3070 5/8 5036-3080 3/4 2536-3090 7/8 2536-3100 1" 2536-3110 1-1/8 2536-3120 1-1/4 2536-3140 1-1/2 25

USS HardenedAlloy Flat Washers

For Gr.5 or 8 Bolts zinc Gold Dichromate PlatedPart Pkgnumber Size Qty34-3010 1/4 10034-3020 5/16 10034-3030 3/8 10034-3040 7/16 10034-3050 1/2 10034-3060 9/16 5034-3070 5/8 5034-3080 3/4 2534-3090 7/8 2534-3100 1" 2534-3110 1-1/8 2534-3120 1-1/4 2534-3140 1-1/2 25

Part Pkgnumber Size Qty02-0040 #4 10002-0060 #6 10002-0080 #8 10002-0100 #10 10002-0120 #12 100

SAe Machine Screw Flat Washers

Low carbon steel. zinc finish

extra ThickFlat Washers

Extra thickness elmimates bolt failure caused by "dishing-out" of flat washers. Made from special high alloy steel and double heat-treated. Exceeds ASTM A325 and A490 specifications. zinc gold dichromate finish.

USSPart Bolt Thick Pkgnumber Size -ness Qty08-6010 1/4 .098 5008-6020 5/16 .098 5008-6030 3/8 .118 5008-6040 7/16 .118 5008-6050 1/2 .200 2508-6060 9/16 .200 2508-6070 5/8 .250 2508-6080 3/4 .250 1208-6090 7/8 .250 1208-6100 1" .250 12

SAe08-3010 1/4 .086 5008-3020 5/16 .086 5008-3030 3/8 .118 5008-3040 7/16 .118 5008-3050 1/2 .200 2508-3060 9/16 .200 2508-3070 5/8 .250 2508-3080 3/4 .250 1208-3090 7/8 .250 1208-3100 1" .250 12

Fender Washers

Low carbon steel oversized washers. zinc finish. Package Qty: 100

STAndARd 18 gauge (.050" thick) Use for electrical, plumbing, fixtures, drywall, plaster, etc.

exTRA-THICK 14 gauge (.080" thick) Use for automotive use or anywhere a heavier washer is required. * has a .12 thickness

Part Bolt O.d. I.d.number Size (In.)03-1651 1/8 9/16 5/3203-1652 3/16 1-1/4 7/3203-1653 1/4 1" 9/3203-1654 1/4 1-1/4 9/3203-1655 1/4 1-1/2 9/3203-1656 1/4 2" 9/3203-1658 5/16 1-1/4 11/3203-1659 5/16 1-1/2 11/3203-1661 3/8 1-1/4 13/3203-1662 3/8 1-1/2 13/3203-1663 3/8 2" 13/3203-1666 1/2 2" 17/32

Part Bolt O.d. I.d.number Size (In.)03-311 3/16 1-1/4 7/3203-312 1/4 1" 9/3203-314 1/4 1-1/2 9/3203-316 5/16 1-1/2 11/3203-332* 5/16 1-3/4 11/3203-317 3/8 1-1/4 13/3203-318 3/8 1-1/2 13/3203-333* 3/8 1-3/4 13/3203-319 1/2 2" 17/3203-334* 1/2 2" 17/32

Countersunk Flanged Countersunk

Finishing Washers

Raised, convex shape for use wth 82° countersunk flat and oval head chrome screws. Nickel plated brass.Part PkgSize numberSize QtyCOUNTERSUNK03-1048 #4 10003-1049 #6 10003-1050 #8 10003-1051 #10 10003-1052 #12 10003-1053 #14 100FLANGED COUNTERSUNK03-1054 #6 10003-1055 #8 10003-1056 #10 100



Part Pkgnumber Size Qty03-1000 #4 10003-1001 #6 10003-1002 #8 10003-1003 #10 10003-1004 #12 10003-1005 1/4 10003-1006 5/16 10003-1007 3/8 10003-1008 7/16 10003-1009 1/2 10003-1010 9/16 5003-1011 5/8 5003-1012 3/4 5003-1013 7/8 5003-1014 1" 50

Machinery Bushings

Can be used in place of stan-dard flat washers. Low carbon mild steel, plain finish.

Actual thickness18 ga., 3/64"(.050)

Part Inside Outside Pkgnumber diameter diameter Qty20-169 1/2 7/8 5020-202 9/16 15/16 5020-170 5/8 1" 5020-171 3/4 1-1/4 5020-182 7/8 1-3/8 5020-173 1" 1-1/2 5020-174 1-1/8 1-3/4 5020-175 1-1/4 1-7/8 5020-176 1-3/8 2-1/8 2520-177 1-1/2 2-1/4 2520-178 1-3/4 2-1/2 25

Part Inside Outside Pkgnumber diameter diameter Qty20-203 1/2 7/8 5020-204 9/16 15/16 5020-205 5/8 1" 5020-179 3/4 1-1/4 5020-180 7/8 1-3/8 5020-181 1" 1-1/2 5020-182 1-1/8 1-3/4 5020-183 1-1/4 1-7/8 5020-184 1-3/8 2-1/8 2520-185 1-1/2 2-1/4 2520-186 1-5/8 2-3/8 2520-187 1-3/4 2-1/2 2520-188 1-7/8 2-7/8 2520-189 2" 3" 2520-190 2-1/8 3-1/8 1020-181 2-1/4 3-1/4 1020-206 2-3/8 3-3/8 10


Part Inside Outside Pkgnumber diameter diameter Qty20-193 3/4 1-1/4 5020-194 7/8 1-3/8 5020-195 1" 1-1/2 5020-196 1-1/8 1-3/4 5020-197 1-1/4 1-7/8 5020-198 1-3/8 2-1/8 2520-199 1-1/2 2-1/4 2520-207 1-5/8 2-3/8 2520-201 2" 3" 2520-209 2-1/8 3-1/8 10

Part Pkgnumber Size Qty01-0040 #4 10001-0060 #6 10001-0080 #8 10001-0100 #10 10001-0120 #12 10001-1010 1/4 10001-1020 5/16 10001-1030 3/8 10001-1040 7/16 10001-1050 1/2 10001-1060 9/16 5001-1070 5/8 5001-1080 3/4 2501-1090 7/8 2501-1100 1" 2501-1110 1-1/8 2501-1120 1-1/4 2501-1140 1-1/2 25

Standard Split for Grade 2 or 5 zinc Plated*

Part Pkgnumber Size Qty34-1010 1/4 10034-1020 5/16 10034-1030 3/8 10034-1040 7/16 10034-1050 1/2 10034-1060 9/16 5034-1070 5/8 5034-1080 3/4 2534-1090 7/8 2534-1100 1" 2534-1110 1-1/8 2534-1120 1-1/4 2534-1140 1-1/2 25

Lock Washers

Alloy Split for Grade 8 Bolts zinc Dichromate*

external Shake-proofzinc Plated

Part Pkgnumber Size Qty03-1015 #4 10003-1016 #6 10003-1017 #8 10003-1018 #10 10003-1019 #12 10003-1020 1/4 10003-1021 5/16 10003-1022 3/8 10003-1023 7/16 10003-1024 1/2 10003-1025 9/16 5003-1026 5/8 50

Internal Shake-proofzinc Plated

Countersunk external zinc Plated

Part Pkgnumber Size Qty03-5271 #8 10003-5278 3/8 100


Hi-CollarSplit Lock Washers

Narrow design for use in counter-bored holes with socket head cap screws or 12 point counterbore screws. Made from 1055 -1065 carbon steel. Part Pkgnumber Size Qty03-1030 #4 10003-1031 #6 10003-1032 #8 10003-1034 #10 10003-1035 1/4 10003-1036 5/16 10003-1037 3/8 10003-1038 7/16 10003-1039 1/2 10003-1041 5/8 5003-1042 3/4 5003-1043 7/8 2503-1044 1" 2503-1045 1-1/8 2503-1046 1-1/4 25


MAINTENANCE PRODUCTS INC. • (800) 523-2367 (219) 696-6411 5-I

Section 5 Stainless SteelBBolts

Carriage, S/S 5-4

CCap Screws

Stainless Steel 5-1

NNuts

Stainless Steel Hex 5-4

SScrews

Carriage, S/S 5-4Set

Stainless Steel 5-3Socket Hd.

Stainless Steel 5-2, 5-3Stainless Steel 5-1

Stainless SteelButton Socket Cap Screws 5-3Cap Screws 5-1Flat Washers 5-5Key Stock 5-8Lock Washers 5-4Machine Screws 5-6Nuts 5-4Sheet Metal Screws 5-7Socket Cap Screws 5-2Socket Set Screws 5-3

TTechnical Data

Stainless Steel 5-9

WWashers

AN 5-5Army-Navy 5-5Military 5-5MS 5-5Stainless Steel 5-4, 5-5

5-II FAX: (219)-696-6413 • WEBSITE: http://www.mpi-online.com

MAINTENANCE PRODUCTS INC. • (800) 523-2367 (219) 696-6411 5-1

Stainless Steel Hex Head Cap ScrewsAlternate head marking.

304SS

Important — Apply Anti-Seize Lubricant to

stainless steelbolt and nut assemblies!

(More information on pg. 100)

Type 316 and other stainless steel alloys available upon special request

Type 18-8, 304 series stainless steel. Minimum tensile strength : 85,000 PSI

Temperature range: -300°F to +800°F. Nonmagnetic.

1/4"-20 diameterPart # Length Pkg Qty22-182 1/2 10022-183 3/4 10022-184 1" 10022-185 1-1/4 10022-186 1-1/2 10022-187 1-3/4 10022-188 2" 10022-189 2-1/4 5022-190 2-1/2 5022-191 2-3/4 5022-192 3" 5022-193 3-1/2 25

5/16"-18 diameterPart # Length Pkg Qty22-195 1/2 10022-196 3/4 10022-197 1" 10022-198 1-1/4 10022-199 1-1/2 10022-200 1-3/4 10022-201 2" 5022-202 2-1/4 5022-203 2-1/2 5022-204 2-3/4 5022-205 3" 5022-206 3-1/2 2522-207 4" 25

3/8"-16 diameterPart # Length Pkg Qty22-208 1/2 10022-209 3/4 10022-210 1" 10022-211 1-1/4 10022-212 1-1/2 10022-213 1-3/4 5022-214 2" 5022-215 2-1/4 2522-216 2-1/2 2522-217 2-3/4 2522-218 3" 25

1/4"-28 diameterPart # Length Pkg Qty22-286 1" 10022-287 1-1/4 10022-288 1-1/2 10022-289 2" 10022-290 2-1/2 5022-291 3" 50

5/16"-24 diameterPart # Length Pkg Qty 22-292 1/2 10022-293 3/4 10022-294 1" 10022-295 1-1/4 10022-296 1-1/2 10022-297 1-3/4 10022-298 2" 50

3/8"-24 diameterPart # Length Pkg Qty 22-302 1-1/2 10022-303 1-3/4 5022-304 2" 5022-305 2-1/2 25

1/2"-20 diameterPart # Length Pkg Qty22-306 1" 5022-307 1-1/4 5022-308 1-1/2 2522-309 1-3/4 2522-310 2" 2522-311 2-1/4 2522-312 2-1/2 2522-313 2-3/4 2522-314 3" 25

7/16" diameterPart # Length Pkg Qty22-223 1" 5022-224 1-1/4 5022-225 1-1/2 5022-226 1-3/4 2522-227 2" 2522-228 2-1/2 25

1/2"-13 diameterPart # Length Pkg Qty22-231 3/4 5022-232 1" 5022-233 1-1/4 5022-234 1-1/2 2522-235 1-3/4 2522-236 2" 2522-237 2-1/4 2522-238 2-1/2 2522-239 2-3/4 2522-240 3" 2522-241 3-1/2 2522-242 4" 2522-243 4-1/2 25

5/8"-11 diameterPart # Length Pkg Qty22-258 1-1/2 2522-260 2" 2522-261 2-1/4 2522-262 2-1/2 2522-263 3" 2522-264 3-1/2 2522-265 4" 2522-266 4-1/2 2522-267 5" 2522-268 5-1/2 2522-269 6" 25

3/4"-10 diameterPart # Length Pkg Qty22-270 1" 2522-271 1-1/4 2522-272 1-1/2 2522-274 2" 25

USS SAe

5-2 FAX: (219)-696-6413 • WEBSITE: http://www.mpi-online.com

Stainless Steel Socket Head Cap Screws

Type 18-8, 304 series stainless steel. Minimum tensile strength : 85,000 PSI. Nonmagnetic.


Important — Apply Anti-Seize Lubricant to stainless steel

bolt and nut assemblies!(More information on pg. 100)

#8 diameterPart # Length Pkg Qty22-095 3/8 10022-096 1/2 10022-097 5/8 10022-098 3/4 10022-100 1" 100

9/64" key size

#10 diameterPart # Length Pkg Qty22-101 3/8 10022-102 1/2 10022-103 5/8 10022-104 3/4 10022-105 7/8 10022-106 1" 10022-107 1-1/4 5022-108 1-1/2 50

5/32" key size

1/4-20 diameterPart # Length Pkg Qty22-109 3/8 5022-110 1/2 5022-111 5/8 5022-112 3/4 5022-113 7/8 5022-114 1" 5022-115 1-1/4 5022-116 1-1/2 5022-117 1-3/4 2522-118 2" 25

3/16" key size

5/16-18 diameterPart # Length Pkg Qty22-119 1/2 5022-120 5/8 5022-121 3/4 5022-122 7/8 5022-123 1" 5022-124 1-1/4 5022-125 1-1/2 5022-126 1-3/4 2522-127 2" 2522-128 2-1/4 2522-129 2-1/2 25

1/4" key size

1/4-28 diameterPart # Length Pkg Qty22-164 1/2 5022-165 5/8 5022-166 3/4 5022-167 1" 5022-168 1-1/4 5022-169 1-1/2 50

3/16" key size

5/16-18 diameterPart # Length Pkg Qty22-172 1-1/4 5022-173 1-1/2 50

1/4" key size

3/8-16 diameterPart # Length Pkg Qty22-174 3/4 5022-175 1" 5022-176 1-1/4 5022-177 1-1/2 25

5/16" key size

1/2-13 diameterPart # Length Pkg Qty22-178 1" 2522-179 1-1/4 2522-180 1-1/2 2522-181 2" 25

3/8" key size

3/8-16 diameterPart # Length Pkg Qty22-130 1/2 5022-131 3/4 5022-132 7/8 5022-133 1" 5022-134 1-1/4 5022-135 1-1/2 2522-136 1-3/4 2522-137 2" 2522-138 2-1/4 2522-139 2-1/2 25

5/16" key size

1/2-13 diameterPart # Length Pkg Qty22-140 3/4 2522-142 1" 2522-143 1-1/4 2522-144 1-1/2 2522-146 2" 2522-148 2-1/2 2522-149 3" 25

3/8" key size

SAeUSS


USS6-32 diameter

Part # Length Pkg Qty22-038 3/16 10022-040 5/16 10022-041 3/8 10022-042 1/2 100

1/16" key size

8-32 diameterPart # Length Pkg Qty22-043 1/8 10022-044 3/16 10022-045 1/4 10022-046 5/16 10022-047 3/8 10022-048 1/2 100

5/64" key size

10-24 diameterPart # Length Pkg Qty22-053 1/2 10022-055 3/4 100

3/32" key size

1/4-20 diameterPart # Length Pkg Qty22-056 3/16 10022-057 1/4 10022-058 5/16 10022-059 3/8 10022-060 1/2 10022-061 5/8 5022-062 3/4 5022-063 1" 50

1/8" key size

5/16-18 diameterPart # Length Pkg Qty22-064 1/4 10022-070 1" 50

3/32" key size

3/8-16 diameterPart # Length Pkg Qty22-071 5/16 10022-072 3/8 10022-073 1/2 10022-074 5/8 10022-075 3/4 50

3/16" key size

1/2-13 diameterPart # Length Pkg Qty22-080 1" 25

1/4" key size

SAe10-32 diameter

Part # Length Pkg Qty22-081 1/4 10022-082 5/16 10022-083 3/8 10022-084 1/2 100

3/32" key size

1/4-20 diameterPart # Length Pkg Qty22-086 1/4 10022-087 5/16 10022-089 1/2 100

1/8" key size

1/4-20 diameterPart # Length Pkg Qty22-781 3/4 10022-782 1" 100

5/16-18 diameterPart # Length Pkg Qty22-783 5/8 10022-784 3/4 10022-785 1" 100

3/8-16 diameterPart # Length Pkg Qty22-786 3/4 10022-787 1" 10022-788 1-1/4 100

Stainless Steel Cup Point Set Screws

Type 18-8, 304 series stainless steel. Nonmagnetic.

Type 18-8, 304 series stainless steel.Length measured from under head.


Stainless Steel

Button Socket Cap Screws


*important — Apply Anti-Seize Lubricant to stainless steel bolt and nut assemblies!

WARnInG — If you use stainless steel fasteners,

please read this...Failure to apply anti-seize lubricant to stainless steel bolt assemblies may result in breakage of the assembly. Be aware that friction and/or heat build-up1 are the cause of surface galling during assembly. Galling is a common phenomenon on stainless assemblies that are left unlubricated. As many as 10% of the assemblies installed "dry" can possibly fail. Application of a quality anti-seize lubricant (we suggest Loctite Nickel Based Anti-Seize Lubricant) between the mating threads is a sure way to prevent surface galling2.

1 Prevent heat build-up! When using a pneumatic

wrench, it helps to reduce the tool speed to prevent

any heat build-up during assembly. Heat causes

friction, which can lead to surface galling.2 Where anti-seize lubricants are not allowed, use

either stainless hex nuts of a different metallurgy,

such as type 316 stainless, or use brass hex

nuts instead.

Stainless Steel Hex nuts & Lock Washers

Type18-8 Stainless Steel

Finished Hex nuts* USSPart # Size Pkg Qty22-318 1/4 10022-319 5/16 10022-320 3/8 10022-321 7/16 5022-322 1/2 5022-323 5/8 2522-324 3/4 2522-325 7/8 2522-326 1" 25 SAePart # Size Pkg Qty22-327 1/4 10022-328 5/16 10022-329 3/8 10022-330 7/16 50

18-8 Stainless Steelnylon Insert Lock

nuts* USSPart # Size Pkg Qty22-337 #6 10022-338 #8 10022-339 #10(3/16) 10022-340 1/4 10022-341 5/16 10022-342 3/8 10022-343 7/16 2522-344 1/2 2522-345 5/8 25

SAePart # Size Pkg Qty22-346 #10(3/16) 10022-347 1/4 10022-348 5/16 10022-349 3/8 10022-330 7/16 50

18-8 Stainless Steel Machine Screw nuts*

Part # Size Pkg Qty22-322 6-32 10022-333 8-32 10022-334 10-24 10022-335 10-32 10022-336 12-24 100

18-8 Stainless Steel Split Lock Washers

USSPart # Size Pkg Qty22-368 #6 10022-369 #8 10022-370 #10(3/16) 10022-372 1/4 10022-373 5/16 10022-374 3/8 10022-375 7/16 2522-376 1/2 2522-377 5/8 25

Note: smaller sizes may be slightly magnetic.

1/4"-20 diameterPart # Length Pkg Qty22-567 3/4 10022-568 1" 10022-569 1-1/4 10022-570 1-1/2 10022-582 2" 10022-583 2-1/2 10022-584 3" 10022-585 4" 100

5/16"-18 diameterPart # Length Pkg Qty22-591 1" 10022-592 1-1/4 10022-597 1-1/2 10022-598 2" 10022-599 2-1/2 10022-604 3" 10022-605 4" 50

3/8"-16 diameterPart # Length Pkg Qty22-769 1" 10022-606 1-1/4 10022-607 1-1/2 10022-612 2" 10022-613 2-1/2 5022-614 3" 5022-615 4" 5022-616 5" 5022-617 6" 50

1/2"-13 diameterPart # Length Pkg Qty22-618 1-1/2 5022-619 2" 5022-620 2-1/2 5022-621 3" 5022-676 4" 2522-677 5" 2522-678 6" 25

Stainless Steel Carriage Bolts

Type 18-8 , 304 series stainless steel


Stainless Steel MS Flat WashersMeets MS15795 military specifications. Type 18-8 stainless steel.

Part Bolt MS15795- I.d. O.d. THICKneSS Pkgno. Size dash no. Inches Inches Min. Max. Qty22-350 #6 SAE -806 5/32 3/8 .036 .065 10022-351 #8 SAE -807 3/16 3/8 .036 .065 10022-571 #8 USS -841 3/16 7/16 .036 .065 10022-572 #10 -808 7/32 7/16 .036 .065 10022-363 #10 SAE -842 7/32 1/2 .036 .065 10022-352 #10 USS† -809 1/4 9/16 .051 .080 10022-364 1/4 SAE -810 9/32 5/8 .051 .080 10022-354 1/4 USS -811 5/16 3/4 .051 .080 10022-365 5/16 SAE -812 11/32 11/16 .051 .080 10022-355 5/16 USS -813 3/8 7/8 .064 .104 10022-366 3/8 SAE -814 13/32 13/16 .051 .080 10022-356 3/8 USS -815 7/16 1" .064 .104 10022-573 7/16 SAE -816 15/32 59/64 .051 .080 5022-357 7/16 USS -817 1/2 1-1/4 .064 .104 5022-367 1/2 SAE -818 17/32 1-1/16 .074 .121 5022-358 1/2 USS -819 9/16 1-3/8 .086 .132 5022-359 5/8 USS -821 11/16 1-3/4 .108 .160 5022-360 3/4 USS -823 13/16 2" .122 .177 2522-361 7/8 USS -825 15/16 2-1/4 .136 .192 2522-362 1" USS -827 1-1/16 2-1/2 .136 .192 25

† #10 USS has same dimensions as #12 SAE washers.Also available in type 316 series stainless steel washers, subject to minimum packaging.

Stainless Steel An Flat WashersMeets AN960 C aeronautics specifications. Type 18-8 stainless steel.

Part Bolt An960- I.d. O.d. Pkgnumber Size dash no. Inches Inches Thickness Qty22-574 6 -C6 .149 3/8 1/32 10022-575 8 -C8 .174 3/8 1/32 10022-576 10 -C10 13/64 7/16 1/16 10022-577 1/4 -C416 17/64 1/2 1/16 10022-578 5/16 -C516 21/64 9/16 1/16 10022-579 3/8 -C616 25/64 5/8 1/16 10022-580 7/16 -C716 29/64 3/4 1/16 5022-581 1/2 -C816 33/64 7/8 1/16 50


18-8 Stainless Steel Machine Screws

6-32 diameterPart # Length Pkg Qty22-440 3/8 10022-441 1/2 10022-442 3/4 10022-443 1" 10022-444 1-1/4 100

8-32 diameterPart # Length Pkg Qty22-445 3/8 10022-446 1/2 10022-447 3/4 10022-448 1" 10022-449 1-1/4 100

10-24 diameterPart # Length Pkg Qty22-450 3/8 10022-451 1/2 10022-452 3/4 10022-453 1" 10022-454 1-1/4 10022-455 1-1/2 100

10-32 diameterPart # Length Pkg Qty22-456 3/8 10022-457 1/2 10022-458 3/4 10022-459 1" 10022-460 1-1/4 10022-461 1-1/2 100

12-24 diameterPart # Length Pkg Qty22-462 1/2 10022-463 3/4 10022-464 1" 100

6-32 diameterPart # Length Pkg Qty22-679 1/4 10022-680 3/8 10022-681 1/2 10022-682 3/4 10022-683 1" 10022-684 1-1/4 10022-685 1-1/2 100

8-32 diameter22-686 3/8 10022-687 1/2 10022-688 3/4 10022-689 1" 10022-690 1-1/4 10022-691 1-1/2 10022-692 2" 100

10-24 diameter22-693 3/8 10022-694 1/2 10022-695 3/4 10022-696 1" 10022-697 1-1/4 10022-698 1-1/2 10022-699 2 100

10-32 diameter22-700 3/8 10022-701 1/2 10022-702 3/4 10022-703 1" 10022-704 1-1/4 10022-705 1-1/2 10022-706 1-3/4 10022-707 2" 100

12-24 diameter22-708 1/2 10022-709 3/4 10022-710 1" 100

1/4-20 diameter22-711 1/2 10022-712 3/4 10022-713 1" 10022-715 1-1/2 10022-716 2" 5022-717 2-1/2 5022-718 3" 50

6-32 diameterPart # Length Pkg Qty22-724 1/4 10022-725 3/8 10022-726 1/2 10022-727 3/4 10022-728 1" 10022-729 1-1/4 10022-730 1-1/2 100

8-32 diameter22-731 3/8 10022-732 1/2 10022-733 3/4 10022-734 1" 10022-735 1-1/4 10022-736 1-1/2 10022-737 2" 100

10-24 diameter22-738 3/8 10022-739 1/2 10022-740 3/4 10022-741 1" 10022-742 1-1/4 10022-743 1-1/2 10022-744 2 100

10-32 diameter22-745 1/2 10022-746 3/4 10022-747 1" 10022-748 1-1/4 10022-749 1-1/2 10022-750 1-3/4 10022-752 2" 100

12-24 diameter22-753 1/2 10022-754 3/4 10022-755 1" 100

1/4-20 diameter22-756 1/2 10022-757 3/4 10022-758 1" 10022-759 1-1/4 10022-760 1-1/2 10022-761 2" 5022-762 2-1/2 5022-763 3" 50

Flat HeadSlotted

Pan HeadPhillips

Flat HeadPhillips


Stainless Steel Sheet Metal ScrewsType 18-8 , 304 series stainless steel Type A point . Sharp threads

Pan HeadPhillips

Pan HeadSlotted

Oval HeadPhillips

#4 diameterPart # Length Pkg Qty22-645 1/4 10022-646 3/8 10022-647 1/2 10022-648 3/4 100

#6 diameterPart # Length Pkg Qty22-649 1/4 10022-650 3/8 10022-651 1/2 10022-652 3/4 10022-653 1" 10022-654 1-1/4 100

#8 diameterPart # Length Pkg Qty22-655 1/4 10022-656 3/8 10022-657 1/2 10022-658 3/4 10022-659 1" 10022-660 1-1/4 10022-661 1-1/2 100


#12 diameterPart # Length Pkg Qty22-669 1/2 10022-670 3/4 10022-671 1" 100

#14 diameterPart # Length Pkg Qty22-672 1/2 10022-673 3/4 10022-674 1" 10022-675 1-1/2 100

#4 diameterPart # Length Pkg Qty22-487 1/4 10022-488 3/8 10022-489 1/2 10022-490 3/4 100

#6 diameterPart # Length Pkg Qty22-491 1/4 10022-492 3/8 10022-493 1/2 10022-494 3/4 10022-495 1" 10022-496 1-1/4 100






#8 diameterPart # Length Pkg Qty22-631 1/2 10022-632 3/4 10022-633 1" 10022-634 1-1/4 10022-635 1-1/2 100

#10 diameterPart # Length Pkg Qty22-636 1/2 10022-638 3/4 10022-639 1" 10022-640 1-1/4 10022-641 1-1/2 100



LENGTH

dIA.

1/16 diameterPart # Length Pkg Qty22-518 1/2 10022-519 3/4 10022-520 1" 10022-521 1-1/2 10022-522 2" 100

3/32 diameterPart # Length Pkg Qty22-525 1-1/4 10022-526 1-1/2 10022-527 1-3/4 10022-528 2" 100

1/8 diameterPart # Length Pkg Qty22-530 1-1/4 10022-531 1-1/2 10022-532 1-3/4 10022-533 2" 10022-534 2-1/2 50

5/32 diameterPart # Length Pkg Qty22-535 1" 10022-536 1-1/2 5022-538 2" 5022-539 2-1/2 25

3/16 diameterPart # Length Pkg Qty22-540 1" 10022-541 1-1/2 5022-542 2" 5022-544 2-1/2 25

*Extremely small sizes may be slightly magnetic.

Stainless Steel

Cotter Pins

Type 304 stainless steel. Non-magnetic*

Stainless Steel

Square Key Stock

Type 304 stainless steel. Non-magnetic 12" Length

Tolerance: ± .002"Part # Size Pkg Qty22-244 1/8 622-245 3/16 622-246 1/4 622-247 5/16 622-248 3/8 622-249 1/2 422-250 5/8 222-251 3/4 222-252 7/8 122-253 1" 1


Stainless Steel Facts & Tech data Provided as a general, nontechnical reference for common fastener usage. Consult a competent engineering reference for critical applications.

Type 18-8, 304 Series Stainless Steel is the most commonly used stainless steel available. Stainless steel is a corrosion resistant alloy steel containing mainly chromium, nickel, and silicon in various combinations, plus small percentages of titanium and vanadium. By AISI definition, a steel is called stainless when it contains at least 4% or more chromium. In the presence of oxygen1, these metals create a surface phenomenon known as passivity, forming an invisible film which protects the underlying metal from corrosion under severe environments. Further strengthening of this protective film is done through a cleaning process called Passivating. The passivation process dissolves ferrous particles and surface impurities. The stainless steel is then cleaned, lubricated, foreign substances are neutralized—increasing the corrosion resistance even further. The passivation process requires various oxidizing solutions, normally a nitric acid dip.

Corrosion resistant— Type 18-8 stainless steel protects against plant fumes, industrial contaminants2, agriculture chemicals, oxidation, salt spray, and abrasion wear caused by ice and blowing sand.Temperature resistant— Type 18-8 stainless steel retains its physical properties under extreme temperature changes.Properties—Type 18-8 , 304 Series

Temperature range: -300°F to +800°FTensile strength: 85,000 PSI minimumWorkability: Cannot be hardened. Nonmagnetic in most cases. Some very small parts can be slightly magnetic.

Application— Use Type 18-8 stainless steel only where the elements or chemical corrosion is a factor. While other stainless steels may exceed the corrosion resistance, few can take the mechanical wear and abuse of Type 18-8 stainless steel. Most often used where extensive welding and fabricating takes place. Do not specify type 18-8 stainless steel fasteners for applications requiring higher strength components such as SAE Grades 5 or 8 cap screws. The tensile strength of type 18-8 stainless screws (see specifications) is only comparable to that of low carbon steel SAE Grade 2 cap screws. Although type 18-8 stainless steel can seem difficult to drill or cut— do not assume it to be a high tensile strength fastening component.

Cutting and drilling— Most stainless steels are very abrasive resistant. This is the primary reason stainless steel is sometimes seems difficult to cut and drill.

Drilling— to drilling stainless steel, "Cobalt" steel drill bits work best, but only when a drill press is available. Cobalt drills are can easily break with the movement as-sociated with portable electric drills. When a portable drill is absolutely necessary, special heavy duty drill bits work best (see "Brute Drills"). These drills are designed to drill most stainless steels and hardened alloys in both portable and fixed applications. They have specially designed precision cutting edges and a heavy duty web to withstand movement associated with portable drilling applications.

Grinding— When using high speed die grinders or chop saws to cut stainless steel parts, use a thin abrasive blade whenever possible. Die grinding wheels 1/16" thick or less are recommended. Chop saw wheels 3/32" thick or less are recommended. When surface grinding, use Zirconium based products (see Flat Type 27 Zirconia Grinding Wheels and Big CatTM Flap Discs). Quality zirconium last longer and is an excellent choice for stainless and exotic steels.

Sawing— Use high speed Bi-metal steel saw blades, preferably with the variable tooth patterns now available. We stock these in band saw blades, hack saw blades and hole saws that will do the job.

The Problem - Galling of Stainless Steel nuts and bolts.Reprinted from Industrial Fasteners Institute Fastener Standards, 6th Edition 1988GALLING AND SEIZINGA frequent complaint about threaded fasteners is the problem of thread galling and seizing. Galling happens during fastener tightening. Seizing may happen in two ways. The first is a direct consequence of galling. The other (galling) occurs in service and is not a problem until disassembly is attempted.

GallingThread galling seems to be the most prevalent with fasteners made of stainless steel aluminum, titanium and other alloys which self-generate an oxide surface film for corrosion protection. During fastener tightening as pressure builds between the contacting, and sliding, thread surfaces, protective oxides are broken, possibly wiped off, and interface metal high points shear or lock together. This cumulative clogging-shearing-locking action causes increasing adhesion. In the extreme, galling leads to seizing, the actual freezing together of the threads. If tightening is continued, the fastener can be twisted off or its threads ripped out.

There are various theories which explain the mechanism of galling and the apparent vulnerability of stainless steel and some of the non-ferrous alloys. Suffice it to say here that galling is a genuine problem and deserves the engineer’s (and end user’s) attention when considering the use of fasteners made of one of the more susceptible materials.

The following measures have been found helpful in relieving potential galling.

- Thread lubrication is the most effective. Among the more popular lubricants are those containing substantial amounts of molybdenum disulfide, graphite (“anti-seize compounds”), mica or talc, and some of the proprietary extreme pressure waxes. Another form of lubrication is silver and/or cadmium plating. The addition of a lubricant introduces other concerns. Torque-tension relationships are altered, if the lubricant is too “slippery,” easier loosening under vibration is a possibility. Also, the compatibility of the lubricant with the service environment should be examined. Just as one simple example, stainless steel is frequently used in food processing equipment. The pres-ence of an organic lubricant - and, certainly cadmium plating - could be a hazard.

-Parts of dissimilar alloys, and having different hardnesses, usually have less tendency to gall than mating parts of the same alloy. For example, the possibility of Type 416 stainless steel nuts galling when mated with Type 305 stainless steel bolts is less than if the nuts were of Type 303 stainless steel.

-The smoother the surface textures the less the frictional resistance. Rolled threads - the most common thread manufacturing practice for externally threaded fasteners in sizes 1 in. and smaller - are relatively smooth. External threads which are cut, and internal threads which are tapped, are considerably rougher. Unfortunately, there is no easy method for rolling internal threads.

-Heat contributes to the possibility of galling. High speed fastener installation and tightening generates heat. Lowering wrenching speeds can help reduce galling.

1NOTE: When oxygen is not present, such as in underground applications, the use of a brass or copper based fastener is recommended. Lack of oxygen to stainless steel or to the unexposed thread areas (between the assembled bolt and nut) of stainless steel will cause galling or “cold welding”. Refer to page 110 for more information on installation and prevention of galling.

2ACID RESISTANCE: In the presence of “diluted” sulfuric acids, Type 316 stainless steel will perform well in most cases. For extremely severe environments, call us to special order “Carpenter 20” fasteners, a special alloy designed for extreme environments. Type 18-8, 304 series stainless is rated good, exposed to 95% pure sulfuric acid. Users’ discretion is advised, and a test is recommended.

Section 6 Metric

AAssortments/Kits

Metric 'O' Rings 6-2

CCap Screws

Class 8.8Coarse 6-1Fine 6-2

Class 10.9Coarse 6-2

Flat Socket 6-2Socket 6-3

GGrease Fittings 6-5

MManifold Studs

Metric 6-4

NNuts

Class 8 6-5Class 10 6-5Lock

Nylon Insert 6-5

SScrews

Machine 6-5Set Screws 6-3Studs

ManifoldMetric 6-4

TTools

Bolt Gauge 6-2Hex Key Wrenches

Long Arm 6-4Short Arm 6-4

Pitch Gage 6-3

WWashers

Class 8.8 6-4Class 10 6-4Lock 6-4

Revised 2/2012


8.8Property Class 8.8 heat treated medium carbon steel, Tensile strength: 116,000 psi minimum. Conforms to all ISO standards. Strength comparable to SAE Grade 5. DIN 933- Fully threaded (coarse). DIN 931- Partly threaded (coarse). DIN 961- Fully threaded (fine). DIN 960- Partly threaded (fine). Part numbers followed by * are fully threaded. Length measured from under head.

M4 COARSe .7 PITCHWrench Size: 7mm

Part Pkgnumber Length Qty19-003* 10 10019-004* 12 10019-005* 16 10019-006* 20 10019-007* 25 10019-008* 30 10019-010 40 100

M6 COARSe 1.0 PITCHWrench Size: 10mm

Part Pkgnumber Length Qty19-030* 10 10019-031* 12 10019-032* 16 10019-033* 20 10019-034* 25 10019-035* 30 10019-036* 35 10019-037* 40 10019-039* 50 100


Part Pkgnumber Length Qty19-015* 10 10019-016* 12 10019-017* 16 10019-018* 20 10019-019* 25 10019-020* 30 10019-021 35 10019-022 40 10019-023 45 10019-024 50 100


Part Pkgnumber Length Qty19-049* 12 10019-050* 16 10019-051* 20 10019-052* 25 10019-053* 30 10019-054* 35 10019-055* 40 10019-057* 50 100


Part Pkgnumber Length Qty19-071* 10 10019-072* 12 10019-073* 16 10019-074* 20 10019-075* 25 10019-076* 30 10019-077* 35 10019-078* 40 10019-079 45 10019-080 50 10019-081 55 10019-082 60 10019-083 65 10019-084 70 10019-085 75 5019-086 80 5019-087 90 5019-088 100 5019-089 110 50


Part Pkgnumber Length Qty19-108* 12 10019-109* 16 10019-110* 20 10019-111* 25 10019-112* 30 10019-113* 35 10019-114* 40 10019-115* 45 10019-116 50 10019-117 55 10019-118 60 10019-119 65 10019-120 70 10019-121 75 5019-122 80 5019-123 85 5019-124 90 5019-125 100 5019-126 110 50


Part Pkgnumber Length Qty19-147* 20 5019-148* 25 5019-149* 30 5019-150* 35 5019-151* 40 5019-152* 45 5019-153* 50 5019-154* 55 5019-155 60 5019-157 70 5019-158 75 5019-159 80 5019-162 100 2519-164 120 2519-170 180 1019-171 190 10


Part Pkgnumber Length Qty19-200* 20 2519-201* 25 2519-202* 30 2519-203* 35 2519-204* 40 2519-205* 45 2519-206* 50 2519-209 65 2519-211 75 2519-214 90 25


Part Pkgnumber Length Qty19-241* 30 2519-243* 40 2519-245* 50 2519-247 60 2519-249 70 2519-251 80 2519-252 90 2519-253 100 25

Metric 8.8 Hex Cap Screws Coarse


Metric 10.9 Alloy Cap Screws

Min. tensile strength: 150,000 psi. Strength comparable to SAE GR 8.Conforms to ISO standards. Plain finish. Part numbers fol-lowed by * are fully threaded.

Metric 8.8 Cap Screws

Fine & extra Fine

M8 FIne 1.0 PITCHWrench Size: 13mm

Part Pkgnumber Length Qty19-095* 20 10019-097* 30 10019-100* 45 10019-101* 50 10019-103 60 100


Part Pkgnumber Length Qty19-1210* 16 10019-1211* 20 10019-1212* 25 10019-1213* 30 10019-1214 35 10019-1215 40 10019-1216 45 10019-1217 50 100


Part Pkgnumber Length Qty19-730 8 10019-732 12 10019-733 16 10019-734 20 10019-736 30 10019-737 35 10019-738 40 100


19-1221* 16 10019-1222* 20 10019-1223* 25 10019-1224* 30 10019-1225 35 10019-1226 40 10019-1227 45 10019-1228 50 10019-1229 60 100


19-1233* 20 10019-1234* 25 10019-1235* 30 10019-1236 35 5019-1237 40 5019-1238 45 5019-1239 50 5019-1240 60 5019-1241 80 50


19-746 12 10019-747 16 10019-749 25 10019-750 30 10019-751 35 100


19-1244* 25 10019-1245* 30 10019-1247* 40 5019-1248 45 5019-1249 50 5019-1250 60 5019-1251 80 25


19-754 25 5019-755 30 5019-756 35 5019-757 40 50


19-1288* 45 5019-1290 60 5019-1291 80 50


Part Pkgnumber Length Qty19-135* 35 10019-136* 40 10019-138* 50 10019-140 60 100


Part Pkgnumber Length Qty19-172* 20 5019-173* 25 5019-175* 35 5019-180* 60 5019-182 70 5019-184 80 50

M12 exTRA FIne 1.25 PITCHWrench Size: 19mm

Part Pkgnumber Length Qty19-187* 25 5019-190* 40 5019-191* 45 5019-196 70 50


Metric Flat Head Socket Cap

Screws

DIN 7991-10. Property class 10.9 alloy steel. Tensile strength 150,000 psi minimum. Conforms to ISO standards. Plain finish.

Metric Bolt GaugePlastic sizer measures diameters, thread pitches and wrench sizes. Part number 42-003

MeTRIC "O" RInG MAInTenAnCe KITBUNA N RUBBER, 36 SIzES; M5.4 -

M24 OD. IN A POLYPROPYLENE BOX. PART nO. AV-15961

*See Auveco Products catalog for indi-vidual sizes.

Metric "O" Ring Kit


Metric Socket Head Cap Screws

DIN 912-12. Property class 12.9 alloy(exceeds SAE Gr 8 specs) Tensile strength 180,000 psi min. Conforms to all ISO standards. Coarse pitch only. Plain finish.


Part Pkgnumber Length Qty19-508 6 10019-510 10 10019-511 12 10019-512 16 10019-514 20 100

M3 COARSe .5 PITCHWrench Size: 1.5mm

Part Pkgnumber Length Qty19-1059 5 10019-1062 10 100


19-537 8 10019-538 10 10019-539 12 10019-540 16 10019-541 18 10019-542 20 10019-544 25 10019-545 30 10019-546 35 10019-547 40 100


19-1082 6 10019-1083 8 10019-1084 10 10019-1085 12 10019-1087 20 100


19-1095 10 10019-1098 20 10019-1099 25 100


19-1106 12 10019-1107 16 10019-1109 25 100


19-523 10 10019-524 12 10019-527 20 10019-528 22 10019-529 25 10019-530 30 10019-532 40 10019-533 45 100


19-1066 5 10019-1068 8 100

M5 COARSe .8 PITCHWrench Size: 2.5mm

19-1076 10 10019-1077 12 10019-1078 16 100


19-560 10 10019-561 12 10019-562 16 10019-563 18 10019-564 20 10019-565 22 10019-566 25 10019-567 30 10019-568 35 10019-569 40 10019-570 45 10019-571 50 10019-573 60 10019-577 80 100


Part Pkgnumber Length Qty19-584 16 10019-586 20 10019-588 25 10019-589 30 10019-590 35 10019-591 40 10019-592 45 10019-593 50 10019-598 75 5019-599 80 50


19-604 20 5019-605 25 5019-606 30 5019-607 35 5019-608 40 5019-609 45 5019-610 50 5019-612 60 5019-614 70 2519-616 80 25


19-626 30 2519-628 40 2519-630 50 25


19-641 30 2519-642 35 2519-644 45 25

Metric Socket Set Screws

DIN 916. Class 12.9 alloy (exceeds SAE Grade 8). Tensile strength 180,000 psi min. Conforms to all ISO standards Coarse pitch. Plain finish


Metric Pitch GageAccurately measures 24 pitch sizes from .25mm - 6mm. Part number 7070


Metric Studs

For cylinder heads and manifolds. DIN 939. Coarse pitch. Class 5.8 medium carbon steel. Plain finish. (A) Thread Length(B) Thread Length(C) Overall Length

M8 COARSe 1.25 PITCHPart Pkgnumber A B C Qty19-1271 22 10 35 1019-1272 22 10 40 1019-1273 22 10 45 10

M10 COARSe 1.5 PITCH19-1276 26 12 42 1019-1277 26 12 47 1019-1278 26 12 52 1019-1279 26 12 62 519-1280 26 12 72 5

M12 COARSe 1.75 PITCH19-1281 30 15 90 5

Grade 8.8 Metric Threaded Rod

DIN 975-8. Heat-treated mild steel. Plain finish.Tensile strength: 113,000 PSI. Ref. ISO 898/1 1978. All coarse pitch. Length: 1 Meter

Part Thread dia. Pkgnumber x Pitch Qty99-113 M6 x 1.0 199-114 M8 x 1.25 1 99-115 M10 x 1.5 199-116 M12 x 1.75 199-117 M14 x 2.0 199-118 M16 x 2.0 199-119 M18 x 2.5 199-120 M20 x 2.5 199-121 M22 x 2.5 199-122 M24 x 3.0 1

Fine pitch threaded rod available upon special request.

Metric Hex Key Wrenches & Sets

Part Hex Pkgnumber Size Length Qty7030 2.5 60 107031 3 65 107032 4 72 107033 5 80 107034 6 90 107036 8 100 107037 9 105 107038 10 112 107041 14 140 57043 19 175 5

Part Hex Pkgnumber Size Length Qty7048 5 130 107049 6 150 107051 8 170 107053 10 190 10

SHORT ARM

LOnG ARM

SeTS

9 PC. MeTRIC CHAMFeRed Hex Key SeT W/HOLdeR SIzES 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10Part number 29-412

7 PC. MeTRIC FOLdInG Hex Key SeTSizes 1.5, 2, 2.5, 3, 4, 5, 6Part number 6816

6 PC. MeTRIC FOLdInG Hex Key SeTSIzES 4, 5, 6, 7, 8, 10Part number 6817

Metric Flat Washers

DIN 125. Low carbon steel. M2 - M10 zinc plated, all other plainPart Screw Pkgnumber Size Id Od Qty19-442 2 2.2 4.5 10019-443 3 3.2 7 10019-444 4 4.3 9 10019-445 5 5.3 10 10019-446 6 6.4 12 10019-447 7 7.4 14 10019-448 8 8.4 17 10019-449 10 10.5 21 10019-450 12 12 24 10019-451 14 15 28 10019-452 16 17 30 5019-453 18 19 34 5019-454 20 21 37 5019-456 24 25 44 25

Part Screw Pkgnumber Size Id Od Qty19-457 3 3.1 6.2 10019-458 4 4.1 7.6 10019-459 5 5.1 9.2 10019-460 6 6.1 11.8 10019-461 7 7.1 12.8 10019-462 8 8.1 14.8 10019-463 10 10.2 18.1 10019-464 12 12.2 21.1 10019-465 14 14.2 24.1 10019-466 16 16.2 27.4 5019-467 18 18.2 29.4 5019-468 20 20.2 33.6 2519-469 22 22.5 35.9 2519-470 24 24.5 40 25

Part Screw Pkgnumber Size Id Od Qty19-1265 8 8.7 17.3 10019-1266 10 10.3 20.5 10019-1267 12 13.7 27 100

For use Class 10.9 fasteners zinc

Class 10 Flat Hardened

Metric Lock Washers

DIN 127. Spring steel. Use with Class 8.8 or 10.9 fasteners


Metric Hex nuts

8

Class 8 FinishedDIN 934. Use with class 8.8 fasteners. M3-14: low carbon stl M16-24: heat treated low carb stl

CoarsePart dia/ Thick Pkgnumber Pitch ness Qty19-370 M3x.5 2.4 10019-371 M4x.7 3.2 10019-372 M5x.8 4 10019-373 M6x1.0 5 10019-374 M7x1.0 5.5 10019-375 M8x1.25 6.5 10019-377 M10x1.5 8 10019-380 M12x1.75 10 10019-383 M14x2.0 11 10019-385 M16x2.0 13 10019-387 M18x2.5 15 10019-389 M20x2.5 16 100

Fine19-376 M8x1.0 6.5 10019-378 M10x1.25 8 10019-379 M10x1.0 8 10019-381 M12x1.50 10 10019-382 M12x1.25 10 10019-386 M16x1.5 13 10019-390 M20x2.0 16 100

CoarsePart dia/ Thick Pkgnumber Pitch ness Qty19-418 M3x.5 4 10019-419 M4x.7 5 10019-420 M5x.8 5 10019-421 M6x1.0 6 10019-422 M8x1.25 8 10019-424 M10x1.5 10 10019-427 M12x1.75 12 10019-430 M14x2.0 14 100

Fine19-423 M8x1.0 8 10019-425 M10x1.25 10 100

CoarsePart dia/ Thick Pkgnumber Pitch ness Qty19-1260 M6x1.0 5 10019-1261 M8x1.25 6.5 10019-1262 M10x1.5 8 10019-1263 M12x1.75 10 10019-1259 M14x2.0 11 100

Class 10 Alloy

Alloy steel for use with Class 10.9 al-loy bolts. DIN 934. Plain finish.

Metric nylon Insert Lock nuts

DIN 985. Low carbon steel. Reus-able. Max. temp:250°F. zinc finish

6mm 8mm 10mm

STRAIGHTPart Pkgnumber dia. x Pitch Qty3110 M6 x 1.0 503114 M8 x 1.0 503117 M10 x 1.0 50

45° eLBOW3112 M6 x 1.0 253115 M8 x 1.0 253118 M10 x 1.0 25

90° eLBOW3113 M6 x 1.0 253116 M8 x 1.0 253119 M10 x 1.0 25

Metric Grease Fittings

M4 COARSe .7 PITCHPart Pkgnumber Length Qty19-927 6 10019-928 8 10019-929 10 10019-930 12 10019-931 16 10019-932 18 10019-933 20 10019-935 25 10019-936 30 10019-937 35 100

M6 COARSe 1.0 PITCH19-952 10 10019-953 12 10019-954 16 10019-955 20 10019-956 25 10019-957 30 10019-958 35 10019-959 40 10019-960 45 100

M5 COARSe .8 PITCH19-939 8 10019-940 10 10019-942 16 10019-943 18 10019-944 20 10019-946 25 10019-947 30 10019-948 35 10019-950 45 100

M8 COARSe 1.25 PITCH19-962 16 10019-964 25 10019-965 30 10019-966 40 10019-967 50 100

Metric Phillips Pan Head

Machine Screws

DIN 7985. Low carbon steel. zinc finish



Section 7

Pins & Rings

BBent Pull Pins 7-3BowTie Locking Cotter 7-2

CClevis Pins 7-6Collars, Shaft 7-7Cord Stock (O-Ring) 7-14Cotter Pins 7-1Cotter Pins, Locking 7-2Cotters, Hairpin 7-2

DDowel Pins 7-5

GGrip Pins 7-3

HHairpin Cotters 7-2Hitch Pin Clips 7-2; 7-4Hitch Pins 7-3; 7-4

KKeys

Cotter 7-1Half Moon 7-6Woodruff 7-6

Key Stock 7-9

LLynch Pins 7-4

MMeasuring Tools

O-Ring Sizing Cone 7-12

OO-Ring

Cord Stock 7-14Kits 7-14Pick 7-14

O-Rings 7-12; 7-13; 7-14O-Ring Sizing Cone 7-12

PPicks, O-Ring 7-14Pins

Bow-Tie Locking Cotters 7-2Clevis 7-6Coiled Spring 7-4Cotter 7-1Dowel 7-5Expansion 7-5Hairpin Cotter 7-2Roll 7-5Spirol 7-4Spring 7-5Taper 7-6

PliersRetaining Ring 7-7

RRetainers

Hairpins 7-2Retaining Ring Pliers 7-7Retaining Rings

E type 7-11External type 7-9Internal type 7-7

Roll Pins 7-5Rubber

O-Rings 7-12; 7-13; 7-14O-Ring Stock 7-14

SSafety Pins 7-3Seals

“O” Ring 7-12; 7-14Shaft Collars 7-7Snap Lock Pins 7-4Spirol Pins 7-4Split Pins 7-5Spring Pins 7-5Square Key Stock 7-9

TTaper Pins 7-6Technical Data

“E” Type Rings 7-11External Snap Ring 7-10Hairpin Cotter Sizes 7-2Internal Snap Ring 7-8"O" Ring Gauge 7-15

Tension Lock Pins 7-4Tools

O-Ring Picks 7-14Retaining Ring Pliers 7-7

WWire

Lock Pins 7-4Woodruff Keys 7-6

7-II http://www.mpi-online.com • FAX: (219)-696-6413



Cotter PinsExtended prong type.

LenGTH

dIA.

1/16" dIAMeTeRPart # Size Pkg Qty14-007 1/2 10014-008 3/4 10014-009 1" 10014-010 1-1/4 10014-011 1-1/2 10014-012 2" 100

3/32" dIAMeTeR14-014 1/2 10014-015 3/4 10014-016 1" 10014-017 1-1/4 10014-018 1-1/2 10014-019 1-3/4 10014-020 2" 10014-021 2-1/2 10014-022 3" 100

7/64" dIAMeTeR14-023 3/4 10014-024 1" 10014-026 1-1/2 10014-028 2" 100

1/8" dIAMeTeR14-029 1/2 10014-030 3/4 10014-031 1" 10014-032 1-1/4 10014-033 1-1/2 10014-034 1-3/4 10014-035 2" 10014-036 2-1/2 5014-037 3" 50

5/32" dIAMeTeR14-039 3/4 10014-040 1" 10014-042 1-1/2 5014-043 1-3/4 5014-044 2" 5014-045 2-1/4 5014-046 2-1/2 2514-047 3" 25

3/16" dIAMeTeR14-048 3/4 10014-049 1" 10014-050 1-1/4 10014-051 1-1/2 5014-052 1-3/4 5014-053 2" 5014-054 2-1/4 5014-055 2-1/2 2514-056 3" 2514-057 3-1/2 2514-058 4" 2514-059 5" 25

1/16" dIAMeTeRPart # Size Pkg Qty22-518 1/2 10022-519 3/4 10022-520 1" 10022-521 1-1/2 10022-522 2" 100

3/32" dIAMeTeR22-524 1/2 10022-525 1-1/4 10022-526 1-1/2 10022-527 1-3/4 10022-528 2" 100

1/8" dIAMeTeR22-530 1-1/4 10022-531 1-1/2 10022-532 1-3/4 10022-533 2" 10022-534 2-1/2 50

5/32" dIAMeTeR22-535 1" 10022-536 1-1/2 5022-538 2" 5022-539 3" 25

3/16" dIAMeTeR22-540 1" 10022-541 1-1/2 5022-542 2" 5022-544 3" 25

1/4" dIAMeTeRPart # Size Pkg Qty14-063 1" 5014-064 1-1/4 5014-065 1-1/2 5014-067 2" 5014-068 2-1/2 2514-069 3" 2514-070 3-1/2 2514-071 4" 25

5/16" dIAMeTeR14-076 1-1/4 5014-077 1-1/2 5014-078 2" 5014-079 2-1/2 2514-080 3" 2514-081 3-1/2 2514-082 4" 2514-083 4-1/2 2514-084 5" 25

3/8" dIAMeTeR14-086 1-1/2 2514-088 2-1/2 2514-089 3" 2514-090 3-1/2 2514-091 4" 2514-092 5" 25

T304 stainless steel.zinc plated low carbon steel zinc plated low carbon steel

7-2 http://www.mpi-online.com • FAX: (219)-696-6413

Bow-TieTM Locking Cotters

To install, push or pull into hole.

Snap into zero-tension lock position.

Even if the pin is flipped over the end...it stays locked!

To release, pull locking loop up and over.

Note: Locking mechanism works best when fit is loose.

Hairpin Cotters(Hitch Pin Clips)

7-2108

7-2109

Reusable spring-type cotters designed to be strong and secure. Made from hardened 1050 spring wire. zinc finish.

Illustrations actual size

7-21047-21037-2101 7-2105 7-2106 7-2107

7-2110

Part Wire diam. Pkgnumber Shaft Size x Length Qty7-2101 1/8 .047 X 0.594 1007-2103• 3/16-1/4 .054 X 0.969 1007-2104• 5/16-3/8 .072 X 1.188 1007-2105• 3/8-1/2 .091 X 1.625 507-2106• 1/2-9/16 .120 X 2.375 507-2107 5/8-3/4 .148 X 2.750 257-2108 7/8-1 .177 X 3.500 257-2109 1-1/8-1-1/2 .243 X 5.000 107-2110 - .306 X 4.000 10

Works like a hairpin cotter, but it locks! Secure vibration proof design increases safety and reduces liability. Easy on, easy off. No tools required. Made from steel spring wire. zinc finish.

Part Wire diam. Pkgnumber Shaft Size x Length Qty7-2126 1/4" - 5/16" .072" x 1.375" 1007-2127 5/16" - 3/8" .091" x 1.875" 507-2128 7/16" - 1/2" .120" x 2.750" 25



One of today’s most papular hitch components. This versatile pin is most widely used as a quick and simple disconnect for trailer hitch receivers. Made of high quality carbon steel and zinc plated. Pins come complete with plated hairpin cotter. Other sizes, styles and materials available on special order.

Part Usable Pkgnumber diameter Length Qty7-2123 1/2” 3” 57-2124 5/8” 3” 5

Bent Pull Pins w/Hairpin Cotter

Machined 1035 steel. D-Ring type handle swivels freely to stay out of the way. Hairpin cotter provided. zinc finish. Pkg. 1 each

Part Usablenumber diameter Length5693 1/2 3-1/25694 5/8 4-1/25695 5/8 6”5696 3/4 4-1/25697 3/4 6”5698 7/8 4-1/25699 7/8 6”

d-Ring Hitch Pins

Part Usablenumber diameter Length5700 1” 4-1/25701 1” 6”5702 1-1/8 7”5703 1-1/4 7”

“Big-Orange” Forged Hitch PinsPart Usablenumber diameter Length5790 1/2 3-1/25791 5/8 3-3/45792 5/8 6”5793 3/4 4”5794 3/4 6-1/45796 7/8 6-1/2

Part Usablenumber diameter Length5797 1” 4-3/45798 1” 6-3/45799 1-1/8 7”

Precision machined steel. Large one-piece handle is welded on and vinyl coated for positive grip. zinc finish. Hairpin cotter provided. Pkg. 1 eachPart Usablenumber diameter Length5810 1/2 4”5811 5/8 4-1/25812 5/8 6”5813 3/4 4-1/25814 3/4 6-1/25815 7/8 4-1/2

Welded Grip Pins

Part Usablenumber diameter Length5816 7/8 6-1/25817 1” 4-1/25818 1” 6-1/25819 1-1/8 7”5820 1-1/4 7”

Drop-forged steel. D-Ring type handle swivels freely. Orange enamel finish. Hairpin Cotter provided.Pkg. 1 each

Safety PinsPart O.A. Length Inside Width Wirenumber (A) (B) (C) dia. 7-2120 2-3/4” 1-11/16” 5/8” .091”7-2121 4-3/8” 2-13/16” 13/16” .120”7-2122 5-3/4” 3-3/4” 1-1/8” .148”

Positive locking pin for retaining clevis pins. Made from hard-drawn plated spring wire. Pkg. 10 each


1010 carbon steel. zinc Dichromate finish.

Part Usable Pkgno. diameter (A) Length (B) Qty5722 3/16 1-9/16 105723• 3/16 1-9/16 105724 1/4 1-3/4 105725• 1/4 1-3/4 105726 5/16 1-3/4 105727 7/16 1-3/4 105728 7/16 1-15/16 10

• With chain & cotter pin attached.

1010 steel pin, spring steel wire. zinc finish.

Wire Part Loop Pin Usable Pkgnumber Shape diameter Length Qty5729 Round 1/4 1-3/4 55730 Round 3/8 1-1/2 55731 Square 5/16 2-1/2 55732 Square 3/8 2-1/4 5

Snap Lock Pins

Tempered spring-steel snap stays locked. One-piece component. zinc plated steel. Pkg. 1 each

Part Usableno. diameter Length5744 1/2 3-1/25745 5/8 4”5746 3/4 4”5747 3/4 6”5748 7/8 5-1/25749 1 5-1/2

RoundSquare

“A”

“B”

1/16" dIAMeTeRPart # Size Pkg Qty14-125 1/2 5014-126 3/4 5014-127 1" 50

5/64" dIAMeTeR14-128 1/2 5014-129 3/4 5014-130 1" 50

3/32" dIAMeTeR14-132 3/4 5014-133 1" 5014-134 1-1/2 50

1/8" dIAMeTeR14-135 1/2 5014-136 3/4 5014-137 1" 5014-138 1-1/4 5014-139 1-1/2 50

5/32" dIAMeTeR14-140 3/4 5014-141 1" 5014-142 1-1/4 5014-143 1-1/2 5014-144 2" 50

3/16" dIAMeTeR14-145 1/2 5014-146 3/4 5014-147 1" 5014-148 1-1/4 5014-150 2" 5014-151 2-1/2 50

7/32" dIAMeTeRPart # Size Pkg Qty14-152 3/4 5014-153 1" 5014-154 1-1/4 5014-155 1-1/2 5014-156 1-3/4 5014-157 2" 50

1/4" dIAMeTeR14-159 1" 5014-160 1-1/4 5014-161 1-1/2 5014-162 2" 50

5/16" dIAMeTeR14-164 1" 5014-165 1-1/4 5014-166 1-1/2 5014-167 2" 5014-168 2-1/2 50

Coiled Spring PinsAlso know as "spirol pins", these flexible, wound pins fit snugly in "out-of-round" holes and accommodate wider hole tolerances. Full 2-¼ coil wrap provides equal stress distribution. Diameter is hole size. Made from 1070-1090 carbon steel. Chamfered ends. Plain finish.

Wire Lock Pins

Lynch Pins



Spring PinsAlso called roll pins or expansions pins, these oversized pins expand to grip tightly. Diameter shown is hole size, free pin diameter slightly larger. AISI

1075-1095 high carbonsteel. Chamfered ends. zinc finish.

1/16" dIAMeTeRPart # Size Pkg Qty20-243 3/16 5020-244 1/4 5020-246 3/8 5020-247 1/2 5020-248 5/8 5020-249 3/4 5020-250 1" 50

5/64" dIAMeTeR20-251 1/4 5020-252 3/8 5020-253 1/2 5020-254 5/8 5020-255 3/4 5020-256 1" 5020-257 1-1/4 50

3/32" dIAMeTeR20-259 3/16 5020-260 1/4 5020-261 3/8 5020-262 1/2 5020-263 5/8 5020-264 3/4 5020-265 1" 5020-266 1-1/4 5020-717 1-1/2 50

1/8" dIAMeTeR20-267 3/8 5020-268 1/2 5020-269 5/8 5020-270 3/4 5020-718 7/8 5020-271 1" 5020-272 1-1/4 5020-273 1-1/2 50

5/32" dIAMeTeR20-275 1/2 5020-277 3/4 5020-278 1" 5020-280 1-1/2 5020-719 2" 50

3/16" dIAMeTeR20-281 1/2 5020-283 3/4 5020-284 1" 5020-285 1-1/4 5020-287 1-3/4 5020-288 2" 50

3/16" dIAMeTeRPart # Size Pkg Qty20-453 1/2 5020-454 5/8 5020-455 3/4 5020-456 1" 5020-457 1-1/4 5020-458 1-1/2 5020-459 2" 50

1/4" dIAMeTeR20-460 1/2 5020-461 3/4 5020-465 1-3/4 5020-466 2" 5020-468 2-1/2 50

5/16" dIAMeTeR20-470 3/4 5020-471 7/8 5020-472 1" 5020-473 1-1/4 5020-474 1-1/2 5020-475 1-3/4 5020-476 2" 5020-766 2-1/4 5020-477 2-1/2 50

3/8" dIAMeTeR20-768 1/2 5020-769 5/8 5020-478 3/4 5020-770 7/8 5020-481 1-1/2 5020-483 2" 50

1/2" dIAMeTeR20-774 3/4 2520-491 1" 2520-492 1-1/4 2520-493 1-1/2 2520-495 2" 2520-496 2-1/2 2520-497 3" 1020-776 3-1/2 10

7/32" dIAMeTeRPart # Size Pkg Qty20-290 3/4 5020-291 1" 5020-292 1-1/4 5020-294 1-1/2 5020-295 1-3/4 5020-296 2" 50

1/4" dIAMeTeR20-298 5/8 5020-299 3/4 5020-300 1" 5020-301 1-1/4 5020-302 1-1/2 5020-303 1-3/4 5020-304 2" 5020-305 2-1/4 5020-306 2-1/2 5020-723 2-3/4 5020-307 3" 50

5/16" dIAMeTeR20-309 1" 5020-310 1-1/4 5020-311 1-1/2 5020-312 1-3/4 5020-313 2" 5020-315 2-1/2 5020-316 3" 5020-726 3-1/2 5020-727 4" 50

3/8" dIAMeTeR20-318 1" 5020-320 1-1/2 5020-321 1-3/4 5020-322 2" 5020-323 2-1/2 50

7/16" dIAMeTeR20-327 1-1/2 5020-328 2" 50

1/2" dIAMeTeR20-732 1-1/4 5020-733 1-3/4 50

Used for tool and die work, bear-ings, gauges and precision parts. Heat treated alloy steel. Surface

hardness: Rc 60. Core hardness: Rc 50-58. Shear PSI: 150,000. Dowel Pins are ground to .0002"

over sizes listed. Plain finish.

dowel Pins


Clevis Pins

3/16" dIAMeTeR 3/32 HOLe dIA.

Part (L) (e)ffective Pkgnumber Size Length Qty20-847 1/2 .359 2520-848 5/8 .484 2520-335 3/4 .609 2520-336 1" .859 25


20-855 5/8 .484 2520-856 3/4 .609 2520-337 1" .859 2520-339 1-1/4 1.109 2520-340 1-1/2 1.359 2520-342 2" 1.859 2520-343 2-1/4 2.109 2520-344 2-1/2 2.359 2520-857 3" 2.859 2520-345 4" 3.859 10


20-861 1-1/8 .938 2520-346 1-1/4 1.063 2520-347 1-3/8 1.188 2520-348 1-1/2 1.313 2520-349 1-3/4 1.563 2520-350 2" 1.813 2520-862 2-1/2 2.313 2520-351 3" 2.813 25


20-353 1" .766 2520-354 1-1/8 .891 2520-356 1-1/4 1.016 2520-357 1-1/2 1.266 2520-358 1-3/4 1.516 2520-359 2" 1.766 2520-360 2-1/4 2.016 2520-361 2-1/2 2.266 2520-362 3" 2.766 2520-363 4" 3.766 10


20-364 1-1/4 1.016 2520-365 1-1/2 1.266 2520-867 1-3/4 1.516 2520-868 2" 1.766 25


20-366 1-1/2 1.266 2520-367 1-3/4 1.516 2520-368 2" 1.766 2520-369 2-1/4 2.016 2520-370 2-1/2 2.266 2520-371 2-3/4 2.516 2520-372 3" 2.766 2520-373 4" 3.766 10


Part (L) (e)ffective Pkgnumber Size Length Qty20-874 2-1/2 2.266 10


20-377 1-1/2 1.266 1020-378 1-3/4 1.516 10 20-379 2" 1.766 1020-381 2-1/2 2.266 1020-877 3" 2.766 1020-878 3-1/2 3.266 1020-382 4" 3.766 10


20-882 3/4 x 3" 2.766 10

Material: 3/16-3/8 dia.;1008/1010 carbon steel, 7/16-3/4 dia.;

AISI 1018 carbon steel. Cold headed. Cham-fered holes. Plain finish.

Taper Pins

For accurate hole alignment on sprocket and gear assemblies. Large end diameter tolerance: +.0013" to -.0007". Uniform taper runs full length of the pin. Standard taper is 1/4" per foot. Milled from C12L14 low carbon steel. Plain machined finish. Meets MS 24692.

Tip: Stock long length taper pins. They may be easily cut to size, thus reducing overall taper pin inventory.

PLeASe CALL OUR OFFICe FOR

SIZeS And AVAILABILITy.

MOST SIZeS In STOCK!

3/32" (A) THICKneSSPart Length Trade Pkgnumber (B) no. Qty20-089 1/2 2 5020-090 5/8 4 50

1/8" (A) THICKneSS20-091 1/2 3 5020-092 5/8 5 5020-093 3/4 7 50

5/32" (A) THICKneSS20-094 5/8 6 5020-095 3/4 8 5020-096 7/8 10 50

3/16" (A) THICKneSS20-097 5/8 61 5020-098 3/4 9 5020-099 7/8 11 5020-100 1" 13 5020-101 1-1/8 16 5020-102 1-1/4 19 50

7/32" (A) THICKneSS20-103 7/8 12 5020-104 1" 14 5020-105 1-1/8 17 5020-106 1-1/4 20 50

1/4" (A) THICKneSS20-107 3/4 91 5020-108 7/8 A 5020-109 1" 15 5020-110 1-1/8 18 2520-111 1-1/4 21 2520-112 1-3/8 22 25

5/16" (A) THICKneSS20-114 1" B 2520-115 1-1/8 C 2520-118 1-1/2 25 2520-143 1-3/4 25

3/8" (A) THICKneSS20-119 1" 152 2520-163 2" 25

Woodruff Keys

(Half-Moon Keys)Machined 1035 low carbon steel. Rounded corners for easy inser-

tion. Plain finish.



Fits in groove in the housing bore. Made from spring steel. Phosphate & oil finish.

Part (B)ore (G)roove Groove Free Mfr Pkgnumber dia. dia. (W)idth O.(d). number Qty20-556 1/4 .268 .018 .280 N1300-25 5020-557 5/16 .330 .018 .346 N1300-31 5020-558 3/8 .397 .029 .415 N1300-37 5020-559 7/16 .461 .029 .482 N1300-43 5020-560 1/2 .530 .039 .548 N1300-50 5020-561 9/16 .596 .039 .620 N1300-56 5020-562 5/8 .665 .039 .694 N1300-62 5020-563 11/16 .732 .039 .763 N1300-68 5020-564 3/4 .796 .039 .831 N1300-75 5020-565 13/16 .862 .046 .901 N1300-81 5020-566 7/8 .931 .046 .971 N1300-87 5020-567 15/16 1.000 .046 1.041 N1300-93 5020-568 1" 1.066 .046 1.111 N1300-100 5020-569 1.023 1.091 .046 1.136 N1300-102 2520-570 1-1/16 1.130 .056 1.180 N1300-106 2520-571 1-1/8 1.197 .056 1.249 N1300-112 2520-573 1-1/4 1.330 .056 1.388 N1300-125 2520-574 1-5/16 1.396 .056 1.456 N1300-131 2520-575 1-3/8 1.461 .056 1.526 N1300-137 2520-576 1-7/16 1.528 .056 1.596 N1300-143 2520-577 1-1/2 1.594 .056 1.660 N1300-150 2520-578 1-5/8 1.725 .068 1.804 N1300-162 2520-579 1-3/4 1.858 .068 1.942 N1300-175 2520-580 1-7/8 1.989 .068 2.072 N1300-187 1020-581 2" 2.122 .068 2.210 N1300-200 1020-582 2-1/8 2.251 .086 2.350 N1300-212 1020-583 2-1/4 2.382 .086 2.490 N1300-255 1020-584 2-5/16 2.450 .086 2.560 N1300-231 1020-585 2-3/8 2.517 .086 2.630 N1300-237 1020-586 2-1/2 2.648 .086 2.775 N1300-250 10Also available in metric and larger sizes thru 10" diameter. Waldes ref. no. - N5000 (-size).

IRR ref. no. - 3000 (-size).

Retaining Ring Pliers

Shaft Collars(Drill Stops or Set Collars)

Part Shaft Outside Pkgnumber Size dia. Width Qty20-141 3/16 1020-142 1/4 1020-144 3/8 3/4 3/8 1020-146 1/2 1" 7/16 1020-147 5/16 1020-148 5/8 1-1/8 1/2 520-150 3/4 1-1/4 9/16 520-152 7/8 1-1/2 9/16 520-153 15/16 1-5/8 9/16 520-154 1" 1-5/8 5/8 520-157 1-3/16 2" 11/16 120-158 1-1/4 2" 11/16 120-160 1-3/8 2-1/8 3/4 120-161 1-7/16 2-1/4 3/4 120-162 1-1/2 2-1/4 3/4 1

Other styles and sizes available on special request.

Includes cup point socket set screws for a positive lock. Machined from 1035 low carbon steel. Stamped with shaft size. zinc finish.

Internal Retaining Rings

PUSH-BUTTOn COnVeRTIBLeFast conversion without disassembly. Vinyl cushion grips. Chrome finish. Tips sup-plied in 3 popular diameters. Tip sets are replaceable. Made in U.S.A. (Wright Tool).

Part Replacemtentno. Internal external Tip SetWT-9H1221S ......¼" - 1" .............1/8" - 1" .......... WT-9H1221RK WT-9H1234 ......3/8" - 2" ............¼" - 2" ......... WT-9H1234RK


1-1/2 1-5/81-7/16

2-1/2

2-5/16

2-3/8

2-1/4

2-1/82”1-7/8

1-3/4

13/16

3/8 1/27/16

Internal Snap Ring Sizing Chart1/4

1-5/16 1-3/8

1-1/41-1/81-1/16

1.0231”15/16

7/83/4

5/85/16

11/16

9/16



Part (S)haft Groove Groove Free Mfr Pkgnumber dia. dia. (G) Width (W) I.d. (d) number Qty20-510 1/8 .117 .012 .112 1400-12 5020-511 5/32 .146 .012 .142 1400-15 5020-512 3/16 .175 .018 .168 1400-18 5020-513 7/32 .205 .018 .196 1400-21 5020-514 1/4 .230 .029 .225 1400-25 5020-515 9/32 .261 .029 .256 1400-28 5020-516 5/16 .290 .029 .281 1400-31 5020-517 11/32 .321 .029 .309 1400-34 5020-518 3/8 .352 .029 .338 1400-37 5020-519 13/32 .382 .039 .366 1400-40 5020-520 7/16 .412 .029 .395 1400-43 5020-521 15/32 .443 .029 .428 1400-46 5020-522 1/2 .468 .039 .461 1400-50 5020-524 9/16 .530 .039 .521 1400-56 5020-525 19/32 .559 .039 .550 1400-59 5020-526 5/8 .588 .039 .579 1400-62 5020-527 11/16 .646 .046 .635 1400-68 5020-528 3/4 .704 .046 .693 1400-75 5020-529 13/16 .762 .046 .751 1400-81 5020-530 7/8 .821 .046 .810 1400-87 5020-531 15/16 .882 .046 .867 1400-93 5020-532 1" .940 .046 .925 1400-100 5020-533 1.023 .961 .046 .946 1400-102 2520-534 1-1/16 .998 .056 .982 1400-106 2520-535 1-1/8 1.059 .056 1.041 1400-112 2520-536 1-3/16 1.118 .056 1.098 1400-118 2520-538 1-1/4 1.176 .056 1.156 1400-125 2520-539 1-5/16 1.232 .056 1.214 1400-131 2520-540 1-3/8 1.291 .056 1.272 1400-137 2520-541 1-7/16 1.350 .056 1.333 1400-143 2520-542 1-1/2 1.406 .056 1.387 1400-150 2520-543 1-9/16 1.468 .068 1.446 1400-156 2520-544 1-5/8 1.529 .068 1.503 1400-162 2520-545 1-3/4 1.650 .068 1.618 1400-175 2520-547 1-7/8 1.769 .068 1.735 1400-187 1020-548 2" 1.886 .068 1.850 1400-200 1020-549 2-1/8 2.003 .086 1.964 1400-212 1020-550 2-1/4 2.120 .086 2.081 1400-225 1020-551 2-3/8 2.239 .086 2.197 1400-237 1020-552 2-1/2 2.360 .086 2.313 1400-250 1020-574 1-5/16 1.396 .056 1.456 N1300-131 25

Also available in metric and larger sizes. Waldes ref. no. - 5100 (-size). IRR ref. no. - 3100 (-size)

external Retaining RingsExternal rings require a groove on shaft. Made from spring steel. Phos-phate & oil finish.

Key StockMake your own machinery keys from standard length stock. Avail-able in cold drawn C1018 low carbon steel or Type 304 stainless steel. Note: steel square stock is plain finish. 12" LengthUndersize tolerancessteel unplated: +.000" to -.003"; steel plated: +.001" to -.002";stainless: +.000" to -.002"

C1018 STeeLPart # Size Pkg Qty20-123 1/8 620-124 3/16 620-125 1/4 620-126 5/16 620-127 3/8 620-128 7/16 420-129 1/2 420-130 9/16 220-131 5/8 220-132 3/4 220-133 7/8 120-134 1" 1T304 STAInLeSS STeeL20-245 3/16 620-246 1/4 620-247 5/16 620-248 3/8 620-249 1/2 420-250 5/8 220-251 3/4 220-252 7/8 1


1-1/4

1-1/16

1-3/16

1-3/8 1-1/21-9/16

1-7/16

1-7/81-3/41-5/8

2” 2-1/8 2-1/4

2-3/8 2-1/2

1-5/16

1-1/8

7/8

1” 1.023

15/16

9/16

13/16

5/8 11/163/419/32

1/45/16 3/8

1/211/32

13/321/8 5/32 3/16 7/32

15/327/16

external Snap Ring Sizing Chart



Part Shaft Groove Groove Free Free Mfr Pkgnumber dia. (S) dia. (G) Width (W) I.d. (d) O.d. (C) number Qty20-592 1/16 .052 .012 .051 .165 1500-6 10020-593 3/32 .074 .018 .073 .187 1500-9 10020-594 1/8 .095 .018 .094 .230 1500-12 10020-611 9/64 .105 .029 .108 .270 1500-14 10020-595 5/32 .116 .029 .114 .282 1500-15 10020-596 11/64 .127 .029 .125 .312 1500-X17 10020-597 3/16 .125 .029 .122 .375 1500-X18 10020-598 7/32 .188 .029 .185 .437 1500-X21 10020-599 1/4 .210 .029 .207 .527 1500-25 10020-600 5/16 .250 .029 .243 .500 1500-X31 10020-601 3/8 .303 .039 .300 .660 1500-37 10020-602 7/16 .343 .039 .337 .687 1500-43 10020-603 1/2 .396 .046 .392 .800 1500-50 10020-604 9/16 .437 .046 .430 .870 1540-56 5020-605 5/8 .485 .046 .480 .940 1500-62 5020-606 3/4 .625 .056 .616 1.000 1500-X74 5020-607 7/8 .675 .056 .668 1.300 1500-87 5020-608 1" .835 .056 .822 1.500 1500-X98 5020-609 1-3/16 1.079 .068 1.066 1.626 1550-X118 2520-610 1-3/8 1.230 .068 1.213 1.875 1500-X137 25

Also available in metric and larger sizes. Waldes ref. no.. - 5133 (-size). IRR ref. no. - 1000 (-size).

“e” Type Retaining RingsMade from spring steel. Phosphate & oil finish.

Sizing Chart

1/16 3/32 1/8 5/32 11/64 3/16 7/32 1/4 5/16

3/8 7/16 1/2 9/16 5/8 3/4

7/8 1-3/16 1-3/8

9/64

1”


“O” RingsBuna “N” (nitrile) Compound - the most commonly used. For use with mild acids and alkalies, anhydrous ammonia, water, solvents, gasoline and non-aromatic fuels, transmission and hy-draulic fluids, motor oil, silicone. High abrasion and tear resistance. FDA approved. SAE 120R class 1, Hardness is 70 ±5 Shore A durometer. Temperature range : -40°F to +300°F (Do not expose to ketones, brake fluids, strong acids, or ozone. Not for outdoor use.) SAE standard sizes AS-568. Color: Black.

1/16" Thick (.070")Part Size Trade Pkgnumber Id x Od no. Qty20-612 1/8 x 1/4 -006 5020-613 5/32 x 9/32 -007 5020-614 3/16 x 5/16 -008 5020-615 7/32 x 11/32 -009 5020-616 1/4 x 3/8 -010 5020-617 5/16 x 7/16 -011 5020-618 3/8 x 1/2 -012 5020-619 7/16 x 9/16 -013 5020-620 1/2 x 5/8 -014 5020-621 9/16 x 11/16 -015 5020-622 5/8 x 3/4 -016 5020-623 11/16 x 13/16 -017 5020-683 3/4 x 7/8 -018 5020-684 13/16 x 15/16 -019 5020-624 7/8 x 1" -020 5020-685 15/16 x 1-1/16 -021 5020-625 1" x 1-1/8 -022 2520-626 1-1/16 x 1-3/16 -023 2520-627 1-1/8 x 1-1/4 -024 2520-686 1-3/16 x 1-5/16 -025 2520-628 1-1/4 x 1-3/8 -026 2520-687 1-5/16 x 1-7/16 -027 2520-629 1-3/8 x 1-1/2 -028 2520-630 1-1/2 x 1-5/8 -029 2520-688 1-5/8 x 1-3/4 -030 2520-689 1-3/4 x 1-7/8 -031 2520-690 1-7/8 x 2" -032 2520-691 2" x 2-1/8 -033 1020-692 2-1/8 x 2-1/4 -034 1020-631 2-1/4 x 2-3/8 -035 1020-969 2-3/8 x 2-1/2 -036 1020-970 2-1/2 x 2-5/8 -037 1020-971 2-5/8 x 2-3/4 -038 1020-972 2-3/4 x 2-7/8 -039 1020-973 2-7/8 x 3" -040 1020-974 3" x 3-1/8 -041 1020-975 3-1/4 x 3-3/8 -042 1020-976 3-1/2 x 3-5/8 -043 1020-977 3-3/4 x 3-7/8 -044 1020-978 4" x 4-1/8 -045 10

3/32" Thick (.103")Part Size Trade Pkgnumber Id x Od no. Qty20-693 1/8 x 5/16 -104 5020-694 5/32 x 11/32 -105 5020-695 3/16 x 3/8 -106 5020-696 7/32 x 13/32 -107 5020-697 1/4 x 7/16 -108 5020-698 5/16 x 1/2 -109 5020-632 3/8 x 9/16 -110 5020-633 7/16 x 5/8 -111 5020-634 1/2 x 11/16 -112 5020-635 9/16 x 3/4 -113 5020-636 5/8 x 13/16 -114 5020-637 11/16 x 7/8 -115 5020-699 13/16 x 1" -117 5020-639 7/8 x 1-1/16 -118 5020-700 15/16 x 1-1/8 -119 5020-701 1" x 1-3/16 -120 2520-640 1-1/16 x 1-1/4 -121 2520-702 1-1/8 x 1-5/16 -122 2520-703 1-3/16 x 1-3/8 -123 2520-704 1-1/4 x 1-7/16 -124 2520-641 1-5/16 x 1-1/2 -125 2520-642 1-3/8 x 1-9/16 -126 2520-643 1-7/16 x 1-5/8 -127 2520-705 1-1/2 x 1-11/16 -128 2520-979 1-9/16 x 1-3/4 -129 2520-980 1-5/8 x 1-13/16 -130 2520-981 1-11/16 x 1-7/8 -131 2520-982 1-3/4 x 1-15/16 -132 2520-983 1-13/16 x 2" -133 2520-984 1-7/8 x 2-1/16 -134 2520-985 1-15/16 x 2-1/8 -135 2520-986 2" x 2-3/16 -136 1020-987 2-1/16 x 2-1/4 -137 1020-988 2-1/8 x 2-5/16 -138 1020-989 2-3/16 x 2-3/8 -139 1020-990 2-1/4 x 2-7/16 -140 1020-991 2-5/16 x 2-1/2 -141 1020-992 2-3/8 x 2-9/16 -142 1020-993 2-7/16 x 2-5/8 -143 1020-994 2-1/2 x 2-11/16 -144 1020-995 2-9/16 x 2-3/4 -145 1020-996 2-5/8 x 2-13/16 -146 1020-997 2-11/16 x 2-7/8 -147 1020-998 2-3/4 x 2-15/16 -148 1020-999 2-13/16 x 3" -149 1020-1000 2-7/8 x 3-1/16 -150 1020-1001 3" x 3-3/16 -151 1020-1002 3-1/4 x 3-7/16 -152 1020-1003 3-1/2 x 3-11/16 -153 1020-1004 3-3/4 x 3-15/16 -154 1020-1005 4" x 4-3/16 -155 1020-1006 4-1/4 x 4-7/16 -156 10

See O-Ring sizing chart on next page.

Easily determines the correct o-ring size and trade number. Measuring cone fits small sizes and pi tape fits large sizes up to 8" ID. Part number 20-1007

"O"Ring Sizing Cone and Pi Tape



3/16 Thick (.210")Part Size Trade Pkgnumber Id x Od no. Qty20-711 1-5/16 x 1-11/16 -323 2520-712 1-3/8 x 1-3/4 -324 2520-671 1-1/2 x 1-7/8 -325 2520-672 1-5/8 x 2" -326 2520-673 1-3/4 x 2-1/8 -327 2520-674 1-7/8 x 2-1/4 -328 2520-675 2" x 2-3/8 -329 1020-676 2-1/8 x 2-1/2 -330 1020-677 2-1/4 x 2-5/8 -331 1020-679 2-1/2 x 2-7/8 -333 1020-713 2-5/8 x 3" -334 1020-680 2-3/4 x 3-1/8 -335 1020-681 2-7/8 x 3-1/4 -336 1020-682 3" x 3-3/8 -337 1020-956 3-1/8 x 3-1/2 -338 1020-957 3-1/4 x 3-5/8 -339 1020-958 3-5/8 x 4" -342 1020-959 3-3/4 x 4-1/8 -343 1020-960 4" x 4-3/8 -345 1020-961 4-1/8 x 4-1/2 -346 1020-962 4-1/4 x 4-5/8 -347 1020-963 4-3/8 x 4-3/4 -348 1020-964 4-5/8 x 5" -350 1020-965 4-7/8 x 5-1/4 -352 1020-966 5" x 5-3/8 -353 1020-967 5-5/8 x 6" -358 1020-968 6-3/4 x 7-1/8 -364 10

Also available: neoprene, viton, silicone, thicknesses up to 1/2", diameters up to 100" ID, back-up “O” rings, “U” cups

"O" Rings (cont'd)

1/8 Thick (.139")Part Size Trade Pkgnumber Id x Od no. Qty20-706 1/2 x 3/4 -206 5020-707 9/16 x 13/16 -207 5020-644 5/8 x 7/8 -208 5020-708 11/16 x 15/16 -209 5020-645 3/4 x 1" -210 5020-646 13/16 x 1-1/16 -211 50 20-647 7/8 x 1-1/8 -212 5020-648 15/16 x 1-3/16 -213 5020-649 1" x 1-1/4 -214 2520-650 1-1/16 x 1-5/16 -215 2520-651 1-1/8 x 1-3/8 -216 2520-652 1-3/16 x 1-7/16 -217 2520-653 1-1/4 x 1-1/2 -218 2520-654 1-5/16 x 1-9/16 -219 2520-655 1-3/8 x 1-5/8 -220 2520-656 1-7/16 x 1-11/16 -221 2520-657 1-1/2 x 1-3/4 -222 2520-658 1-5/8 x 1-7/8 -223 2520-659 1-3/4 x 2" -224 2520-660 1-7/8 x 2-1/8 -225 2520-661 2" x 2-1/4 -226 1020-662 2-1/8 x 2-3/8 -227 1020-709 2-1/4 x 2-1/2 -228 1020-663 2-3/8 x 2-5/8 -229 1020-664 2-1/2 x 2-3/4 -230 1020-665 2-5/8 x 2-7/8 -231 1020-666 2-3/4 x 3" -232 1020-667 2-7/8 x 3-1/8 -233 1020-668 3" x 3-1/4 -234 1020-710 3-1/8 x 3-3/8 -235 1020-669 3-1/4 x 3-1/2 -236 1020-935 3-3/8 x 3-5/8 -237 1020-936 3-1/2 x 3-3/4 -238 1020-937 3-5/8 x 3-7/8 -239 1020-938 3-3/4 x 4" -240 1020-939 3-7/8 x 4-1/8 -241 1020-940 4" x 4-1/4 -242 1020-941 4-1/8 x 4-3/8 -243 1020-942 4-1/4 x 4-1/2 -244 1020-943 4-3/8 x 4-5/8 -245 1020-944 4-1/2 x 4-3/4 -246 1020-945 4-5/8 x 4-7/8 -247 1020-946 4-3/4 x 5" -248 1020-947 4-7/8 x 5-1/8 -249 1020-948 5" x 5-1/4 -250 1020-949 5-1/8 x 5-3/8 -251 1020-950 5-1/4 x 5-1/2 -252 1020-951 5-1/2 x 5-3/4 -254 1020-952 5-3/4 x 6" -256 1020-953 6" x 6-1/4 -258 1020-954 6-1/2 x 6-3/4 -260 1020-955 6-3/4 x 7" -261 10

Part Size Thick Trade Fitting Pkgnumber I.d. -ness no. Size Qty20-735 .301 .064 -903 - 10020-737 .3510 .072 -904 7/16-20(-4) 5020-738 .4140 .072 -905 1/2-20(-5) 5020-739 .4680 .078 -906 9/16-18(-6) 5020-740 .6440 .087 -908 3/4-16(-8) 2520-741 .7550 .097 -910 7/8-14(-10) 2520-742 .9240 .116 -912 1-1/16-12(-12) 2520-743 1.0408 .116 -914 1-3/16-12(-14) 25 20-744 1.1710 .116 -916 1-5/16-12(-16) 1020-745 1.4750 .118 -920 1-5/8-12(-20) 1020-746 1.7200 .118 -924 1-7/8-12(-24) 1020-747 2.3370 .118 -932 2-1/2-12(-32) 10

Also available upon special order: thicknesses up to 1/2", di-ameters to 100" ID, back-up O-Rings, U-Cups. Other materials available: silicone, nitrile (orange dot) and neoprene material

(blue). Subject to minimum order quantity.

"O" Rings for Boss Thread

Hydraulic Fittings


Viton “O” Rings

Viton compound withstands excessive heat and corrosive chemicals. Compatible with a wide variety of fluids and chemi-cals including diluted and concentrated acids, vegetable oils, synthetic lubricants, motor oils, hydrocarbon fuels, toulene, solvents and gases. Viton material is also ozone resistant. Meets MIL- M6HK810A1-11B38EF31EO78EO16EO36Z1Z2. Class 1, Type II. Hardness is 75 ±5 Shore A durometer. Temperature range: -20°F to +400°F in continuous use, and up to +500°F for intermittent service. SAE standard sizes AS-568. Color: Brown.

For O-ring installation and removal. Will not damage delicate parts. Length: 6". Plastic pouch. Part no. 20-736

2 Pc. Brass "O" Ring Tool Kit

Part Size Trade Pkgnumber Id x Od no. Qty

1/16" Thick (.070")20-217 1/8 x 1/4 -006• 5020-218 5/32 x 9/32 -007• 5020-219 3/16 x 5/16 -008• 5020-220 7/32 x 11/32 -009• 5020-221 1/4 x 3/8 -010• 5020-222 5/16 x 7/16 -011• 5020-223 3/8 x 1/2 -012• 5020-224 7/16 x 9/16 -013 5020-225 1/2 x 5/8 -014 5020-237 9/16 x 11/16 -015 5020-238 11/16 x 13/16 -017 5020-239 7/8 x 1" -020 50

3/32" Thick (.103")20-240 3/8 x 9/16 -110• 5020-241 7/16 x 5/8 -111• 5020-242 1/2 x 11/16 -112• 5020-245 9/16 x 3/4 -113• 5020-434 5/8 x 13/16 -114• 5020-435 11/16 x 7/8 -115• 5020-436 3/4 x 15/16 -116• 5020-499 7/8 x 1-1/16 -118 5020-500 1" x 1-3/16 -120 50

1/8 Thick (.139")20-501 3/4 x 1" -210• 2520-502 13/16 x 1-1/16 -211• 25 20-503 7/8 x 1-1/8 -212• 2520-504 15/16 x 1-3/16 -213• 2520-505 1" x 1-1/4 -214• 2520-506 1-1/16 x 1-5/16 -215• 2520-507 1-1/8 x 1-3/8 -216• 2520-508 1-3/16 x 1-7/16 -217• 2520-509 1-1/4 x 1-1/2 -218• 2520-780 1-1/2 x 1-3/4 -222• 25

• Sizes marked with bullet (•) included in assortment #10-677

UnIVeRSAL “O” RInG KITBUNA N RUBBER, 32 SIzES, 407 PCS, 1/4"-2-1/4" OD. IN A FITTED POLYPROPYLENE BOX. PART nO. 10-700

"O" Ring Cord StockRefills for O-ring making kits.Part Pkgnumber diameter Qty20-909 1/16 50'20-910 3/32 50'20-911 1/8 50'20-912 3/16 50'20-913 1/4 50'20-907 M3.18 2520-908 M5.33 25

"O" Ring Making KitMake any size o-ring right on the job-site. Contains 3 feet of each; 3/32", 1/8", 3/16", 1/4" diam-eter Buna N rubber cord stock, splicing fixture, razor blade and instant adhesive, waterproof solvent and cleaning solvent in sturdy plastic box. Part no. LT-00112



"O" Ring Sizer


Section 8 Electrical

AAuto-Electric Sealing Com-

pound 8-13

BBaling Wire 8-10Batteries 8-23Bulbs

Flashlight 8-23Tuff-Skin Coated 8-19

CCable

Tie Mounts 8-14Ties 8-14, 8-15Tie Tensioner 8-14Trailer 8-12

Cable Ties 8-14, 8-15Clamps

Nylon Tubing 8-16Tubing 8-16

ClipsClosed 8-16Frame 8-15Wire Loom 8-15

Compact Fluorescent Lights 8-18Connectors

Wire Cord 8-20Cord Connectors 8-20Cords

Drop 8-18Extension 8-20

DDrop Cords 8-18

EElectrical

Cord Connectors 8-20Drop Cords 8-18Extension Cords 8-20Heat Guns 8-20Mastic 8-13Plugs 8-20Protective Tubing 8-21Sealing Compound 8-13Solder 8-17Tape 8-13

Tubing, Heat Shrink 8-21Extension Cord Connectors 8-20Extension Cords 8-20

FFlashlight

Aluminum 8-22Fluorescent Work Lights 8-18Flux, Soldering 8-17Frame Clips 8-15

GGrounding

Terminal (Star) 8-3

HHalogen Bulbs 8-19Heat Guns 8-20Heat Shrink Tubing 8-21

IInsulated Closed Clips 8-16

KKester Solders 8-17

LLamps

Flashlight 8-23Halogen 8-19Power Reel 8-18Retractable 8-18Rough Service 8-19Trouble 8-18

Lashing Ties 8-14Lights

Flashlight 8-23Fluorescent Shop 8-18Halogen 8-19Power Reel 8-18Retractable 8-18Rough Service 8-19Safety Coated 8-19Trouble 8-18

Loom Clips 8-15

M

Mastic, Electrical 8-13Mechanic's Wire 8-10Mounts, Cable Tie 8-14

NNo-Crimp Butt Connectors 8-4Nylon

Cable Ties 8-14, 8-15Closed Clips 8-16Mounts 8-14Tubing Clamps 8-16

Adhesive Backed 8-16

PPigtail Connectors

Nylon Closed End 8-5Self-Stripping 8-8, 8-9

PlugsExtension Cord 8-20Trailer Connector 8-12

Posi-Lock Connectors 8-4Primary Wire 8-11

QQuartz Halogen Bulbs 8-19QuickHeat Gun 8-20

RRough Service Bulbs 8-19Rubber

Coated Tube Clamps 8-16

SSafety

Light Bulbs, Coated 8-19Scotchlok Performance+ 8-10Scotchlok Splices 8-8, 8-9Scotchlok Wire Nuts 8-9Sealing Compound 8-13Shrink Tubing, Heat 8-21Soldering Flux 8-17Split Bolt Connectors 8-9Split Loom 8-15

TTape

Electrical 8-13Friction 8-13Glass Cloth 8-13


Plastic 8-13Terminals

3-Way Connectors 8-4B/G+ 8-10Bullet 8-5Butt Connectors 8-4Closed End 8-5Disconnect 8-3, 8-5Double Male-Female 8-3Electrical Spring Connectors 8-9Flag Quick Disconnect 8-5Fork Tongue 8-3Gel Filled Pigtail 8-9Gel Filled Tap 8-8GM Weather Pack 8-6Grounding 8-3IDC 8-8, 8-9Multi-Stack Disconnects 8-3O/B+ 8-10Open Barrel Quick Slide 8-3Performance+ Connectors 8-10Pigtails 8-5Posi-Lock 8-4Quick Slides 8-3, 8-5Ring Tongue 8-2R/Y+ 8-10Scotchlok Splices 8-8, 8-9ScotchlokTM 2 8-10Scotchlok Wire Nuts 8-9Self-Stripping Pigtail 8-8, 8-9Snap Plug 8-5Snap Spade 8-3Spade 8-3Splices 8-4, 8-9Split Bolt Connectors 8-9Star Ring (Grounding) 8-3T-Tap Quick Slide 8-8Weather Pack 8-6Wire Nuts 8-10

TiesLashing 8-14Nylon Cable 8-14, 8-15

Tinners Fluid 8-17Tools

Cable Tie Tensioning 8-14Heat Gun 8-20

TrailerCable 8-12Connectors 8-12

Trouble Lights 8-18Tubing

Clamps 8-16Heat Shrinkable 8-21

Tuff-Skin Bulbs 8-19Ty-Raps 8-14, 8-15

WWeather Pack Shrouds 8-7Weather Pack Terminals 8-6Wire 8-11

Baling 8-10Cord Connectors 8-20Extension Cords 8-20Jacketed 2-conductor 8-11Loom 8-15Loom Clips 8-15Mechanics 8-10Nuts 8-10Parallel 8-12Primary 8-11Protective Cover 8-15Ribbon 8-12Solder 8-17Ties 8-14, 8-15Trailer Cable 8-12

Work Lights 8-18


All-Weather, Heat-Sealable TerminalsKrimp 'N Seal provides a rugged, environmentally-sealed connection for wire sizes 22-10 AWG that will insulate, seal, and protect joints from physical abuse and abrasion, water, salt, and other corrosive compounds.

Waterproof adhesive sealThe inner wall of the heat shrinkable nylon tubing is lined with a special hot-melt adhesive which is inert at room tem-perature permitting wires to be inserted easily. As the sleeve is heated , the adhesive melts and flows under pressure from the tubing. This action fills any existing voids and creates a seal which repels moisture.

Tough and durableKrimp 'N Seal will stand up to the most rigorous tests that can be applied to high-performance splices. The tough nylon tubing resists abra-sion and cutting. Exceeds all UL, CSA, and MIL Spec requirements. Dielectric strength: 7.5l kV

Temperature stabilityKrimp 'N Seal splices remain supple and impact-resistant long after other nylon insulations become brittle and subject to cracking. Tem-perature rating: -55°C to 125°C.

Lower profileKrimp 'N Seal splices are smaller and lighter than most comparable wire splices; a very important advantage when space and weight sav-ings are critical in high-density applications

VersatileThe Krimp 'N Seal sleeve has a funnel-entry opening that accommodates thick wire insulations but will shrink to less than half its original diameter to seal thin insulations effectively.

Krimp 'n Seal

PROdUCT CHARACTeRISTICS Typical properties for the installed splice.

Temperature Rating: ......... -65° to 275°FDielectric Strength: ........... 15 kVVoltage Drop: .................... Less than equal length of wireInsulation Resistance: ...... 1014 MegohmsMilitary Spec. (tubing) ...... MIL-I-23053/4 Class 1 AMS-3624Military Spec. (solder): ..... QQ55771E, MIL-S-14256

elektraLinkTM

SEALEd & SOLdEREd CONNECTORS!THe PeRFeCT ALL-WeATHeR

COnneCTIOn!

ElektralinkTM electrical terminals provide a fast, easy, reliable and moisture resistant way to complete sealed in-line wire splices. Each connection solders, insulates, encapsulates and relieves wire strain for wires from 24 AWG to 10 AWG. When heated with a flame or heat gun, the sleeve shrinks and the solder melts and flows resulting in the perfect connection.

• No crimping tool required.• Low-temp fluxed solder ring melts with a standard heat gun, lighter or match.• Tough, multiple wall tubing adhesive inner melt liner protects connection.• See-thru, color-coded tubing allows visual inspection. • No skill required.• Thick, 100% copper body is electro-tin plated for solderability.• Extra long barrels for better contact.


Ring Terminals High Temp. Wire Stud nylon Vinyl non- non- Krimp-n- elektraRange Size Insulated Insulated Insulated Insulated Seal -LinkTM

22-18 4-6 02-001 02-030 02-200 02-270 02-035(50) 02-322(50)REd22-18 8-10 02-002 02-031 02-201 02-271 02-036(50) 02-324(50)REd22-18 12-14 02-003 - 02-202 - 02-037(50) 02-325(50)REd22-18 3/8 02-004 - - - - -REd16-14 4-6 02-040 02-075 02-208 02-272 - -BLUE16-14 8-10 02-041 02-076 02-209 02-273 02-038(50) 02-328(50)BLUE16-14 12-1/4 02-042 02-077 02-210 02-274 02-039(50) 02-329(50)BLUE16-14 5/16 02-043 - - - - -BLUE16-14 3/8 02-044 - - - 02-167(50) 02-330(50)BLUE12-10 4-6 02-090(50) - - 02-275 - -YELLOW12-10 8-10 02-091(50) 02-120 02-223 02-276 02-168(50) 02-332(50)YELLOW12-10 12-1/4 02-092(50) 02-121 02-224 02-277 02-169(50) 02-333(50)YELLOW12-10 5/16 02-093(50) - 02-225 - - -YELLOW12-10 3/8 02-094(50) 02-122 02-226 02-278 02-170(50) 02-334(50)YELLOW12-10 1/2 02-095(50) - 02-227 - 02-171(50) 02-335(50)YELLOW

Pkg: 100 each (unless marked otherwise)

8 AWG WIRe RAnGeRed

Stud non-Size Insulation Insulated8-10 02-130 02-2301/4 02-131 02-2315/16 02-132 - 3/8 02-133 02-2321/2 02-134 02-233

6 AWG WIRe RAnGeBLUe

Stud non-Size Insulation Insulated 8-10 02-136 -1/4 02-137 02-2355/16 02-138 - 3/8 02-139 02-2361/2 02-140 02-237

4 AWG WIRe RAnGeyeLLOW

Stud non-Size Insulation Insulated 8-10 02-142 -1/4 02-143 02-2395/16 02-144 -3/8 02-145 02-2401/2 02-146 02-241

Pkg: 25 each

Pkg: 100 each Pkg: 100 each Pkg: 50 eachWire Stud PartRange Size number22-18 2-4-6 02-00622-18 6-8-10 02-007

Reduce your terminal inventory! Tapered stud hole is designed to hold tightly on different stud sizes. One terminal can do the job of several. Made of tin plated copper. Nylon insulated with insulation grip.

Large Ring Terminals

Multi-Stud Ring Terminals

Wire Stud PartRange Size number16-14 2-4-6 02-04516-14 6-8-10 02-046

Wire Stud PartRange Size number12-10 6-8-10 02-096

Red BLUe yeLLOW


Pkg: 100 each (unless marked otherwise)

Spade Terminals Wire Stud nylon Vinyl non- Krimp-n- elektraRange Size Insulated Insulated Insulated Seal -LinkTM

22-18 4-6 02-008 02-032 02-203 - -REd22-18 8-10 02-009 02-033 02-204 02-172(50) 02-326(50) REd16-14 4-6 02-047 02-078 02-211 - -BLUE16-14 8-10 02-048 02-079 02-212 02-173(50) 02-331(50)BLUE12-10 4-6 02-097(50) - - - -YELLOW12-10 8-10 02-098(50) 02-123 02-228 02-174(50) 02-336(50)YELLOW

Snap Spade TerminalsSnaps onto stud for hands-free installation. Nylon insulated with insulation grip.

Wire Stud Part PkgRange Size number Qty22-18 6 02-010 10022-18 8 02-011 10022-18 10 02-012 100

Wire Stud Part PkgRange Size number Qty16-14 6 02-049 10016-14 8 02-050 10016-14 10 02-051 10016-14 1/4 02-052 100

Wire Stud Part PkgRange Size number Qty12-10 8 02-099 5012-10 10 02-100 5012-10 1/4 02-101 50

Red

Red

BLUe

BLUe

yeLLOW

yeLLOW

Hook TerminalsNylon insulated with insulation grip.

Wire Stud Part PkgRange Size number Qty22-18 4-6 02-013 10022-18 8-10 02-014 100

Wire Stud Part PkgRange Size number Qty16-14 4-6 02-053 10016-14 8-10 02-054 100

Wire Stud Part PkgRange Size number Qty12-10 8-10 02-102 50

Star Ring Grounding TerminalsSteel serrated ring terminal pierces through paint and other coatings and bites into metal to insure a good con-nection or ground. Use especially where high vibration exists. Eliminates the need for lockwashers. Nylon insulated with insulation grip.Tin plated steel ring.

Part Wire Stud Pkgnumber Gauge Size Qty02-180 22-18 6 10002-181 22-18 8 10002-182 22-18 10 100

Part Wire Stud Pkgnumber Gauge Size Qty02-183 16-14 6 10002-184 16-14 8 10002-185 16-14 10 100

Quick Slide TerminalsMulti-Stack

Wire nylon non-Range Insulated Insulated16-14 02-063 02-216

.250" tab width Pkg Qty 100

Open Barrel Female

Wire Tab Part PkgRange Width number Qty16-14 .250 (1/4) 02-089 100

Mates with 02-088

Open Barrel Male

Wire Tab Part PkgRange Width number Qty16-14 .250 (1/4) 02-088 100

Mates with 02-089double Male-Female Adapters

Tab width: .250" (1/4)Part number Pkg Part number Pkg02-086 100 02-087 100


Krimp-n-Seal Step-down

Crimp connector, then seal heat shrink tub-ing with hot air gun or another heat source for an all weather connection. High grade electrolytic copper, seamless barrel.

Part Wire Pkgnumber Range Color Qty02-108 22-18 to 16-14 Blue 5002-109 16-14 to 12-10 Yellow 5002-118 12-10 to 8 Pink 50

nylon 3-Way Connectors

With insulation grip

Part Wire Pkgnumber Range Color Qty02-027 22-18 Red 2502-070 16-14 Blue 2502-111 12-10 Yellow 25

Butt Connectors

elektraLinkTM

An all-weather sealed and soldered splice. Seal the heat-shrink tubing with hot air gun or other heat source, then focus heat on solder until it flows for a perfect splice every time! nO CRIMPInG!

Part Wire Pkgnumber Range Color Qty02-318 20-24 Clear 5002-319 18-20 Red 5002-320 16-14 Blue 5002-321 12-10 Yellow 50

High Temp. Wire nylon nylon Vinyl non- non- Krimp-n-Range Insulation Grip Insulated Insulated Insulated Insulated Seal

22-18 02-022 02-005 02-034 02-205 02-281 02-029REd8 - - 02-135(25) 02-234(25) - -REd16-14 02-072 02-065 02-082 02-213 02-282 02-074BLUE6 - - 02-141(25) 02-238(25) - -BLUE12-10 02-113 02-110 02-124 02-229 02-283 02-115YELLOW4 - - 02-147(25) 02-242(25) - -YELLOW

Solder Ring

• 4 Times Stronger Than Crimp Connectors • Makes Multiple Splice Connections • High Temperature And Chemical

Resistant • Reusable And Reconnectable

The truly amazing Posi-LockTM no-crimp connector is unique in every way. It will not pull apart, will not vibrate loose and will not melt down. Connector material: Nylon type 6/6. Bullet material: tin plated brass. Made in U.S.A. Approvals: GM# 12346377, U.S. Air Force, UL listed 37CL 600 VAC†.

Part Wire Pkgnumber Range Qty02-395 18-24 awg 2502-397 8-10 awg 12

† For AC/DC stranded wire applications only.

Posi-LockTM no-Crimp Connectors


Krimp-n-Seal Quick Slide TerminalsCrimp connector, then seal heat shrink tubing with hot air gun or another heat source for an all weather con-nection. High grade electrolytic copper.

Tab width: .250 (1/4)

Wire Part number PkgRange Color Male Female Qty20-18 Red 02-449 02-448 5016-14 Blue 02-451 02-450 5012-10 Yellow 02-453 02-452 50

elektraLinkTM Quick Slide Terminals

nO CRIMPInG! An all-weather sealed-soldered connection. Seal heat-shrink tubing with hot air gun or other heat source, then focus heat on solder until it flows. Tab width: .250 (1/4)

Wire Part number PkgRange Color Male Female Qty20-18 Red 02-389 02-390 5016-14 Blue 02-391 02-392 5012-10 Yellow 02-393 02-394 50

Quick Slide Terminals

nylon Fully Insulated Male Quick Slide Terminals

with insulation grip. 3M style shown above†.

Wire Tab PkgRange Width Color Male Female Qty 22-18 .250 (1/4) Red 02-019 02-020 10016-14 .250 (1/4) Blue 02-060 02-061 10012-10 .250 (1/4) Yellow 02-106 02-107 50

†FOR One FLAT SIde deSIGnAdd "F" TO PART nUMBeR.

Male Female

Male

Female

Wire Tab PkgRange Width Color Male Female QtyNylon Insulated22-18 .187 (3/16) Red 02-015 02-017 10022-18 .250 (1/4) Red 02-016 02-018 10016-14 .110 (1/8) Blue - 02-057 10016-14 .187 (3/16) Blue 02-055 02-058 10016-14 .250 (1/4) Blue 02-056 02-059 10012-10 .250 (1/4) Yellow 02-103 02-104 5012-10 .375 (3/8) Yellow - 02-105 50Vinyl Insulated - no insulation grip16-14 .250 (1/4) Blue 02-080 02-081 100

Insulated Quick Slide Terminals

with insulation grip (nylon only)

Part number

Part number Male Female

Male Female

Male Snap Plug Female Snap Receptacle

Snap Plugs & Receptaclesnylon Insulated w/Insulation Grip

& non-Insulated.

Wire Snap Part number PkgRange dia. Male Female Qty22-18 .157 02-023 02-025 10022-18 .180 02-024 02-026 10016-14 .157 02-066 02-068 10016-14 .180 02-067 02-069 100

non-Insulated

Wire Tab Part number PkgRange Width Male Female QtyNon-Insulated16-14 .187(316) 02-217 02-219 10016-14 .250 (1/4) 02-218 02-220 100High Temperature16-14 .250 (1/4) 02-279 02-280 100

Male Female

22-14 16-10

Part Wire Pkgnumber Size Qty02-116 22-14 10002-117 16-10 100

nylon Insulated Pigtails Also called closed-end connectors. Pictured actual size.

Part Wire Tab Pkgnumber Range Width Qty02-175 22-18 .187 (3/16) 10002-176 22-18 .250 (1/4) 10002-177 16-14 .187 (3/16) 10002-178 16-14 .250 (1/4) 100

Nylon Insulated

Female Flag Quick disconnectsnylon Insulated


Weather Pack Terminals

Grey Cavity SealsSilicone seal for 16-14 ga. wire.

Part number Pkg 02-468 25

Removal ToolReleases retention barbs to remove the terminals from the housings. Part number 02-488

20-18 gauge

Male TerminalFits female housings.

Part number Pkg02-461 Mates with 02-462 25

Female TerminalFits male housings.


16-14 gauge





O.e.M Terminal CrimperDuplicates factory crimp on open barrel terminals. Has five crimping stations for 14 to 24 gauge. Part number 02-487

12 gauge





Blue Cavity SealsSilicone seal for 12 ga. wire.


Green Cavity SealsSilicone seal for 20-18 ga. wire.


Green Cavity PlugsSilicone plug for unused cavities.


Flex-pin and lap-lock design for a positive connection. Rated 19 amps continuous. Tin plated. Made in USA.

10" Male Repair Leadwith Silicone Seal

Ready to install in female housings. 18 awg wire, 10" wire length.


Mates with 02-472

10" Female Repair Leadwith Silicone Seal

Ready to install in male housings. 18 awg wire, 10" wire length.

Part number Pkg 02-472 5Mates with 02-471

1. Apply cavity seal to cable, before stripping insulation.

2. Crimp terminal onto stripped wire and cavity seal and insert into connector housing.

3. Once all terminals are inserted, lock wire and seals as shown above.

4. Connect housings together until locked.

Weather Pack Assortments

16-8824 Starter Assortment16-8824-2 Standard Assortment16-8824-32 Starter Plus Assortment16-8821 Starter Assortment16-8821-2 Standard Assortment


Female Housing Part number Pkg02-474 5Mates with 02-473

Weather Pack nylon Housings



Male Housing Part number Pkg02-473 5

Mates with 02-474


Mates with 02-478



Mates with 02-486


Mates with 02-480



Mates with 02-482



Mates with 02-476

Ideal for use in harsh environments. Provides access to the terminals for service. Used for automotive, marine, agricultural and fleet applications. Positive snap action locking. Secondary locking helps terminal retention and provides access to the terminals for service. All housings are indexed to prevent mis-mating. Temperature rating: -40°F(-40°C) to 257°F (125°C). Made in USA. Note: Use female terminals with male housings, use male terminals with female housings.

Male housings are also known as "towers", female housings are also known as "shrouds".

1-Way 2-Way

3-Way Flat 4-Way Flat

4-Way Square 6-Way Flat


LONGER LASTING • The patented ScotchlokTM MRT system forces a protective gel around the wire and ele-ment, providing a moisture-resistant barrier to destructive substances such as salt water and other corrosive environments. The double hinged cover seals out the elements. Special locking feature of the cover insures a protected connection over time.APPLICATIONS • Used in making tap connections where protection from the environment is a benefit. Ap-plications include wiring in trucks, cars, recreational vehicles, snowmobiles, motorcycles, boats, trailers, and off-road vehicles. The same benefits can also be achieved for outdoor lighting and landscaping.FAST! EASY TO USE! • Eliminates the need to tape or insulate by forcing a protective gel around the ele-ment/conductor interface at the time the connection is made. Does not require cutting or stripping of wire - and they make better connections easier and faster.

1) Insert the run wire... 2) Insert the tap wire... 3) Crimp the element... 4) Close cover.

T-Tap Quick Slides enable mid-span connection without stripping insulation. Installs with common pliers so no special tools are necessary. Provides fully-insulated connection when used with fully-insulated male quick-slides. Easy to disconnect. Female end mates with all 1/4" male blades. Self-stripping feature speeds installation, reduces possible conductor damage, eliminates time consuming mid span tap. Provides a circuit test point.

Moisture Resistant Tap Connectors - Gel Filled

(Insulation Displacement Connectors)

TeMPeRATURe RAnGeContinuous operating temperature; -40°F to 167°F (-40°C to 75°C). Install in temperatures as low as 0°F (-18°C).

Part Wire Pkg Matesnumber Color Range Qty with†

02-028 Red 22-18 50 02-01902-073 Blue 18-14 50 02-06002-114 Yellow 12 50 02-106

†Mates with fully insulated male quick disconnects.

Part Wire Pkg number Color Range Qty02-337 Blue 18-14 50

Female T-Tap Connectors

Mates with all 1/4" wideblade male disconnects.

Installed FemaleT-Tap Connector


3M Self-Stripping Pigtail Connectors Sealant-Filled(Insulation Displacement Connector)

Labor saving technology installers demand. Saves time and cuts costs. Use to connect two or three wire ends and insulate the connection. Special sealant provides a moisture-resistant seal , protects against corrosion and damp conditions. Flame retardant. Easy to use; insert 2 or 3 wires completey into the connector and drive cap down with pliers. Used for stranded wire applications.

Part Wire Pkgnumber Gauge Color Qty02-179 22-14 White w/blue cap 50

Part # Color Wire Range Pkg02-150 Red 22-18 18-14 5002-151 Blue 18-14 18-14 5002-1492 White 18-14 18-14 50

All sizes available in bulk. 102-149 is not UL listed or CSA certified .202-149 has open ports to tap 2-wire runs.

Easy-to-use, time saving connector. No special tools required. To install one, just squeeze - no stripping or twisting. Unique "U" contacts provide dependable electrical connections. Use on stranded or solid wire for in-line, pigtail, and tap splices. Color-coded polypropylene insulation. UL listed and CSA certified for 600 volts1. Made in U.S.A.

Split Bolt ConnectorsUse for tapping, paralleling, and dead-ending electrical systems. For use with solid copper wires. Silicon bronze alloy. UL listed. CSA certified. (MCM = 1000 circular mils)

Part Max. Pkgnumber Wire Size Qty02-338 10 Stranded 502-339 8 Stranded 502-340 6 Solid 502-341 4 Solid 502-342 2 Stranded 5

Here are the color-coded wire connectors electricians request. Scotchloks are flexible, yet durable with an outer insulator that gives you a compact, fully insulated connection that won't cut or abraid wires. The Y, R, and G torque fins provide a comfortable, secure grip. Crush-proof steel inner shell permits spring expansion and contraction due to temperature changes. Deep, flexible skirt protects against shorts and let connector bend with the wires you're splicing to fit easily into tight places. Rugged live-action spring wire. Vibration resistant and reusable. Meets federal spec. W-S-610, UL listed and CSA certified for 600 volts.

Part # Color Wire Range Trade number Pkg02-155 Yellow 22-10 Y 10002-156 Red 18-10 R 10002-157 Gray 14-8 G 10002-158 Blue 12-6 B 50

Part # Wire Combinations02-155 Min. 2, #18 Max. 3, #1402-156 Min. 3, #14 Max. 3, #1802-157 Min. 3, #12 Max. 4, #1002-158 Min. 3, #10 Max. 3, #8

3M electrical Spring Connectors(Original Scotchlok Connector)

3M Self-Stripping electrical Connectors(Insulation Displacement Connector)

Part # Color Wire Range Pkg02-152 Brown 18-14 12-10 5002-153 Yellow 12-10 12-10 5002-154 Black .157 18-14 50

Part Max. Pkgnumber Wire Size Qty02-343 1/0 Stranded 502-344 2/0 Stranded 502-345 3/0 Stranded 502-346 4/0, 250MCM Stranded 5


ScotchlokTM 2 connectors were introduced in 1998 to provide maximum protection and a wider wire range. Just three ScotchlokTM 2 connectors handle the work of eight standard connectors. The compact design fits in the most crowded electrical boxes. Long, flexible skirt, rigid top and a modified internal design that is smooth, fast and easy on the hands. Extra-deep flexible skirt provides better protection against potential shock. ScotchlokTM 2 connectors now have a better bite; wires feed better into the connector improving the security of the connec-tion and increasing the level of pull out. Meets federal spec. W-S-610, UL listed and CSA certified for 600 volts.

Wire CombinationsItem Wire Range Min. Max.02-162 22 to 16 1 #20 & 1 #22 2 #1602-163 22 to 14 3 #20 3 #1602-164 22 to 14 3 #20 3 #16 & 1 #1802-165 18 to 12 1 #14 & 1 #18 4 #14 & 1 #1802-166 18 to 10 2 #14 2 #10 & 2 #16

Wire CombinationsItem Wire Range Min. Max.02-159 18 to 10 2 #18 3 #1202-160 18 to 8 2 #14 5 #1202-161 14 to 6 1 #6 2 #8

IdeAL Wire-nut®

3M ScotchlokTM 2 Wire ConnectorsexTended WIRe RAnGe

R/Y+ B/G+

Live action spring wire expands to accept wire shape and size. Deep skirt provides maximum dielectric protection. Flame-retardant thermoplastic shell is rated to 221°F (102°C). Fixed square inner wire spring creates its own threads. Federal spec. W-S-610E. UL and CSA listed. Made in U.S.A.

Part number Color Trade number Pkg02-159 Yellow 451 10002-160 Red 452 10002-161 Blue 454 50

IdeAL Wing-nut®

Part number Color Trade number Pkg02-244 Red/Yellow R/Y+ 10002-245 Blue/Gray B/G+ 50

Tough thermoplastic shell withstands environmental extremes; flame-retardant shell rated to 221°F (102°C). Fixed square inner wire spring creates its own threads. Fed spec W-S-610E. UL and CSA listed. Made in u.S.A.

Part number Color Trade number Pkg02-162 Gray 71B 10002-163 Blue 72B 10002-164 Orange 73B 10002-165 Yellow 74B 10002-166 Red 76B 100

Wire Spool RackStores a large supply of spooled products. Handy for abrasive rolls, baling wire and small hoses as well. Holds spools up to 10" diameter. 26W x 37H x 6D.

Part number 98-WSR-4

Mechanic's WireAnnealed steel multipurpose wire. Can be used for hanging, bundling, baling and emergency repairs. Black finish.

Part Spool Pkgnumber Gauge Size Qty1831 20 (.035") 5 lbs 1 Roll1832 18 (.047") 5 lbs 1 Roll1833 16 (.063") 5 lbs 1 Roll


18 AWG (.048")

16 AWG (.060")

14 AWG (.073")

12 AWG (.092")

10 AWG (.116")

8 AWG (.146")

(ACTUAL SIZe)

Heavy duty Primary Wire

Wire Spool P A R T n U M B e R SGauge Size (ft.) Red White Black Green yellow Brown Blue18 100' 26-200 26-201 26-202 26-206 26-203 26-205 26-20416 100' 26-207 26-208 26-209 26-213 26-210 26-212 26-21114 100' 26-214 26-215 26-216 26-220 26-217 26-219 26-21812 100' 26-221 26-222 26-223 26-227 26-224 26-226 26-22510 100' 26-228 26-229 26-230 26-234 26-231 26-233 26-232 8 100' 26-235 - - - - - -

ALL COLORS AVAILABLE IN 1000' ROLLS

Part number description Pkg26-240 16/2, 100 feet per roll 1 Roll26-382 16/2, 1000 feet per roll 1 Roll26-241 14/2, 100 feet per roll 1 Roll26-384 14/2, 1000 feet per roll 1 Roll

Two full gauge stranded copper (black and white) conductors covered with heavy duty gray plastic jacket. Recommended for trucks, trailers, buses, tractors, marine and general purpose wiring.

Jacketed 2-Conductor Primary Wire

Oil & Grease Resistant, Suitable for Wet or dry Applications, Withstands extreme TempsUL/CSA rated single conductor copper stranded PVC (polyvinyl-chloride) insulated wire. Multi-rated for wiring on industrial machines, automotive, truck, heavy equipment and appliances. Suitable for wet, dry or oily condi-tions. The smooth surface makes it ideal for pulling through loom or conduit. Temperature rating: 221°F (105°C). Nominal wall thickness: 30 mils. Made in U.S.A. Pkg: 1 Roll Meets UL, CSA, MTW, TW, & AWM specifications.

MTW, TW: 600V 221°F (105°C) or for internal wiring of appliances.AWM 1015: 600V oil resistant, 2500V peak elec-tronic use. AWM 1230: 221°F (105°C) 600V 60C oil and mois-ture resistant.AWM 1345: 221°F (105°C) 600V 60C oil and mois-ture resistant.


Trailer Cable & ConnectorsParallel Primary WireStranded copper, PVC insulated.

Trailer Cable

Part number Conductors Size Pkg26-242 3 16 awg, 100' 1 Roll26-243 3 14 awg, 100' 1 Roll26-244 4 16 awg, 100' 1 Roll26-245 4 14 awg, 100' 1 Roll

Trailer Connectors

Part number description Rating03-299 6-Pole Socket 35 amp03-295 7-Pole Socket 40 amp03-296 6-Pole Plug w/Spring 35 amp03-297 7-Pole Plug w/Spring 40 amp

3 Conductor Green-yellow-Brown4 Conductor Green-yellow-Brown-White

neOPRene OUTeR JACKeTPart number Conductors Gauge Pkg26-246 4 14 100'26-247 6 14 100'26-248 7 12(6), 10(1) 100'

Plug with protector springSocket

PLASTIC OUTeR JACKeTPart number Conductors Gauge Pkg26-236 4 14 100'26-237 6 14 100'26-238 7 12(6), 10(1) 100'26-239 7 14 100'

Pin ConnectorsUsed where insulated barrel and positive insulation grip are necessary or desirable. Seamless brass sleeve securely covers the flared, molded nylon. Insulation is securely molded onto brass sleeve and is flared for easier wire insertion. Allows for an excellent mechanical crimp and wire strain relief. Rated to 600 volts maximum, building wire; 1000 volts maximum, 105° C

Part Wire Pinnumber Range Color diam.02-186 22-18 Red .080"02-187 16-14 Blue .080"02-188 12-10 Yellow .100"


electrical Tape

3MTM TemflexTM 1755 Friction TapeTemflex 1755 is a 15 ml thick, coated cloth tape used in electrical and mechanical applications. Made from high quality cotton fabric, coated with an electrical grade adhesive. Provides extra protection against friction and wear due to movement and vibration. Commonly used to protect rubber splicing tapes. Meets ASTM standards.

Part number Size Pkg17-020B 3/4" x 60 ft roll 10 RL

3MTM TemflexTM 1700 Vinyl electrical TapeTemflex 1700 is 3M's economical, yet durable line of 7-mil thick tape. Performs well in a variety of indoor and outdoor installations. Flame retardant, UL listed and CSA certified for 80°C/176°F. Made in USA.

Part number Size Pkg17-019 3/4" x 60 ft. roll 10 RL

3MTM ScotchTM Super 88 Vinyl electrical TapeA heavy duty, 8.5-mil thick, flame retardant, weather resistant tape with superior cold weather handling features. Extra thickness provides added electrical properties, quicker insulation buildup and abrasion resistance. Remains conformable on cold days—even at -18°C/0°F and has an operating temperature range to 105°C/220°F. Resistant to UV rays, moisture, alkalies, acids and corrosion. Meets ASTM, UL, CSA and MIL specifications.

Part number Size Pkg17-008 3/4 X 66 ft. roll 10 RL

3MTM ScotchTM Super 33+ Vinyl electrical TapeSuper 33+ is a stickier, stretchier, highly conformable premium grade 7-mil thick tape that applies well at temperatures as low as -18°C/0°F and has an operating temperature range to 105°C/220°F. Flame retardant, hot and cold weather resistant. Resists UV rays, moisture, alkalies, acids and corrosion. Use as a primary insulation for wire cable splices up to 600V and for fixture and wire splices up to 1 kV. Meets ASTM, UL, HHI and CSA requirements.

Part number Size Pkg17-000 3/4" x 66 ft. roll 10 RL

GAMPAK® Color-Coded electrical TapePressure sensitive vinyl electrical tape used where color-coded wires are unavailable. Cold and weather resistant. Suitable for use at not more than 600 Volts as primary insulation. Flame retardant. UL recognized 119K at 80°C (176°F). CSA accepted. Roll size: 3/4" x 66 ft. Imported. (Not a 3M product)

Part number Color Pkg17-078 Red 10 RL17-079 White 10 RL17-080 Green 10 RL17-085 Yellow 10 RL17-087 Blue 10 RL17-088 Orange 10 RL

3MTM ScotchTM electrical Moisture SealantA tough, self-fusing, rubber based, insulating compound laminated to an all-weather grade vinyl (PVC) backing. Molds easily around difficult shapes and will insulate, moisture seal, and pad all connections up to 600V. Protects against elements and abrasion. Replaces common electrical tape for all season, all weather protection. 60 applications per roll.

Part number Size Pkg Qty17-014 2½” x 10 ft. 1 RL


Self-locking (nonreleasable) cable ties have bent-tips for easy insertion and fast installations. Secures wire bundles and harness components quickly. Molded from 6/6 nylon, use natural nylon for indoor use only, or use weather-resistant black nylon for indoor and outdoor use. Temperature range:-40° F to 185° F. Flame retardant, fungus inert. Resistant to solvents, alkalies and greases. UL recognized (file #E116841).

BLACK UV CABLe TIeS(Sold in full packages only.)

MaxPart Bundle Tensile Pkgnumber Length Width dia. Strength Qty3172 4" 3/32" 3/4" 18 lbs 1003173 6" 9/64" 1-1/4" 30 lbs 1003148 8" 3/16" 1-3/4" 50 lbs 1003174 11" 3/16" 3" 50 lbs 1003149 14" 3/16" 4" 50 lbs 1003175 15" 5/16" 4" 120 lbs 100

HeAVy dUTy LASHInG TIeS3161A 24" 11/32" 6-1/4" 175 lbs 503162A 34" 11/32" 9-3/8" 175 lbs 50

nATURAL CABLe TIeS(Sold in full packages only.)

MaxPart Bundle Tensile Pkgnumber Length Width dia. Strength Qty3150 4" 3/32" 3/4 18 lbs 1003151 6” 9/64" 1-1/4 30 lbs 1003152 8” 3/16" 2" 50 lbs 1003153 11" 3/16" 3" 50 lbs 1003154 14" 5/16" 4" 50 lbs 1003155 15" 5/16" 4" 120 lbs 1006-147 17" 5/16" 5" 120 lbs 1006-148 28" 5/16" 8" 120 lbs 50

nylon Cable Ties

nATURAL MOUnTInG HeAd CABLe TIeSMounting tab has a molded-in screw hole for securing bundles of wire on virtually any surface that has or can accept a drilled hole. Use at temper-atures not exceeding 85°C (185°F).

(Sold in full packages only.)

Part Screw Max. Tensile Pkgnumber Length Size Width dia. Strength Qty3158 8" #10 3/16" 2" 50 lbs 1003159 15" 1/4 5/16" 4" 120 lbs 100

3/4" SQUARe MOUnTInG BASeS Pressure sensitive adhesive backing. For 18-40 lb. ties. Pkg: 50 Part number 3176

1" SQUARe MOUnTInG BASeS Pressure sensitive adhesive backing and hole for screw mounting. For up to 50 lb. ties. Pkg: 50 Part number 3177

TenSIOnInG TOOL Tightens cable ties to proper tension and trims the excess tie end. Part number 3160

CABLe TIe ACCeSSORIeS


Natural 6/6 nylon cable ties with a stainless steel lock imbedded in the head for an extra-tight grip. Smooth, notchless design permits infinite adjustment. Exceeds MIL-S-23190. Sold in full packages only.

MaxPart Bundle Tensile Pkgnumber Length Width dia. Strength Qty3178 3½" 3/32" 5/8" 18 lbs 1003179 5½” 9/64" 1-1/4" 30 lbs 1003180 8” 9/64" 2" 40 lbs 1003181 11" 3/16" 3" 50 lbs 1003182 13" 5/16" 3-1/2" 120 lbs 503183 30" 5/16" 9" 120 lbs 50

UV resistant black available upon special request.

Stainless steel lock(bottom view)

Split Wire LoomUse to cover wire, cable, hoses, etc. Split full length for ease of assembly, yet stays closed. Black nylon. Temp. range: -30°F to 300°F.

Part number Size Pkg Qty26-480 1/4 x 25' 1 Roll26-480-BULK 1/4 x 250' 1 Roll26-249 3/8 x 25' 1 Roll26-249-BULK 3/8 x 250' 1 Roll26-250 1/2 x 25' 1 Roll26-250-BULK 1/2 x 250' 1 Roll26-251 3/4 x 25' 1 Roll26-251-BULK 3/4 x 250' 1 Roll

Ty-RAP® nylon Cable Ties WITH STAInLeSS STeeL LOCK

8" COLORed nylon Cable Ties 100 packs

Part number Part number Part number 02-492 02-493 02-494

Part number Part number Part number 02-495 02-496 02-497

Wire Loom ClipsSpring tension secures wiring, wire looms, cables and hoses to panels and frames. Pkg: 100 each

Illustrations Actual Size.


Secures wiring, hose and tubing to most surfaces. Locks securely, opens easily. Use at temperatures up to 180°F.

Part Tubing Pkgnumber diameter (O.d.) Qty1648 5/32" to 1/4" 251649 5/16" to 1/2" 251650 9/16" to 3/4" 25

Used to fasten wire loom, hose, tubing and cable. Furnished open. Temperature and oil resistant. STeeL w/ Vinyl dipped1/2" WIde, 1/4" BOLT HOLePart Size Pkgnumber Closed I.d. Qty1601 1/4 251602 5/16 251603 3/8 251604 1/2 251605 5/8 251606 3/4 251607 7/8 251608 1" 251619 2" 101620 2-1/2 10

ALUMInUM w/ neoprene Cushion1/2" WIde, 1/4" BOLT HOLe02-440 1/4 2502-441 5/16 2502-442 3/8 2502-443 1/2 2502-444 5/8 2502-445 3/4 2502-446 7/8 2502-447 1" 2502-498 1-1/4 1002-499 1-1/2 1002-500 2" 1002-501 2-1/2 1002-502 3" 10

Nonconductive. Chemical and shock resistant nylon clip for wire loom, hoses or cables. Furnished open. 3/8" wide

Part number Inside Bolt Pkgnatural Black diameter Hole Qty1641 1641-BLK 1/4 #8 251642 1642-BLK 5/16 #8 251643 1643-BLK 3/8 #8 251644 1644-BLK 1/2 #8 251645 1645-BLK 5/8 #10 251646 1646-BLK 3/4 #10 251647 1647-BLK 1" #10 25

nylon Closed Clips

Adhesive Backed nylon Tubing Clamps

Plated steel withVinyl coating

Insulated Closed Clips

Aluminum with neoprene rubber cushion

3/4" WIde, 3/8" BOLT HOLePart Size Pkgnumber Closed I.d. Qty1/4 1609 255/16 1610 253/8 1611 251/2 1612 255/8 1613 253/4 1614 257/8 1615 251" 1616 251-1/4 1617 251-1/2 1618 25


Rugged Solid State electronic voltage detector needs no wire or clip connector to ground. Safe around automotive micro-computers, electronics control modules, sensors, etc.

• Specifically designed for use on autos, trucks, trailers, V's & boats.• No ground wire means no wire tangles nor time lost searching for grounding points.• High Impedance Electronic circuitry.• Negligible Current Draw 1 microamp is 30,000 times less than regular lamp type testers. This gives complete safety when working around sensitive electronic control modules and sensors.• Operating Range between 6 and 28 Volt DC in battery powered systems.• Liquid Crystal Display indicates "CIRCUIT OK +" on contacting positive voltages, and "CIRCUIT OK -" on contact-ing negative voltages.• Lightweight High Strength plastic construction with cap and clip.• Uses no batteries. Maintenance free. ; No Ground or clip required; 10 M ohm Minimum input impedance approx. 1 micro amps @ 24 V.; Operates from 6 to 28 Volts. D.C.; Digital LCD display.; High strength, lightweight carbon fiber reinforced plastic.; Uses no batteries.; Pocket sized; 4.562"L x 1.062"W x 0.438" D. 116.05 x 26.98 x 11.12 mmPart number 29-429

Circuit Tester - non-Contact Voltage Locator

COnTInUTITy TeSTeR NOT FOR LIVE CIRCUITS. Checks circuit continuity with power OFF. Bulb in handle glows when circuit is complete. Detects shorts and broken circuits in wires and switches. Long 36" test lead. Uses size AAA battery (not included). Made in U.S.A. Part number 29-418

Tester Probes

• These Circuit Testers feature an extra long wire that stretches up to 12 feet for use, then automatically retracts.• Quickly and easily check electrical circuits and accessories on 6 and 12 volt • Great for use on cars, trucks, boats, trailers, motorcycles, and snowmobiles• A heavy duty ground clip with insulator is on one end of the retractable wire and a spring supported strain relief is on the other.• The bulb is easily replaced. Part number 29-416

Solder & Flux

Liquid Soldering Flux(Tinners Fluid) Use to clean solder joints. 4 oz. bottle. Part number 21-324

Kester 40/60 Resin Core Solder For most electrical applications. 40% Tin, 60% Lead. Melting point: 460°F. Diameter: .093" (3/32"). 1 lb. spools. Part number 21-303

Kester 40/60 Acid Core Solder For radiators, plumbing, and sheet metal repairs. 40% Tin, 60% Lead. Melting point: 461°F. Diameter: .093" (3/32"). 1 lb. spools. Part number 21-304

Kester 50/50 Solid Wire SolderUsed extensively in plumbing work and with crafts. 50% Tin, 50% Lead. Melting point: 421°F. Diameter: .125" (1/8"). 1 lb. spools. Part number 21-305Kestor "Kwik-draw" 60/40 Resin Core Solder A strong, low-temperature solder. Use for all electrical applications. 60% Tin, 40% Lead. Melting point: 360°F. Diameter: .050" (3/64"). Size: 1.3 oz. Pkg: 6 tubes. Part number 21-309

Acid Soldering Paste FluxUse with solid wire solder for lead-free plumbing (non-electrical) repairs.Part number 21-325


Compact Fluorescent Work Lights

Compact Fluorescent drop Light• Runs cooler than incandescents.• On/off switch built into handle.• 360°swivel hook, nonglare reflector • 50 ft. of 18/3 cord - oil and water resistant.• 15-watt bulb (included).Part number 17-167 (Replacement bulb Number 17-168)

Compact Fluorescent drop Light• Runs cooler than incandescents.• On/off switch built into handle.• 360°swivel hook, nonglare reflector • 25 ft. of 18/3 cord - oil and water resistant.• 60 watts of light from a 13-watt bulb (included).Part number 17-173 (Replacement bulb Number 17-174)

20851 - 13 WATT HEAVY DUTY OSHA REEL 13 Watt OSHA compliant model• 13-Watt compact tube light with heavy duty caps for shatter resistance• Automatic on/off - Turns on when extended off when retracted• New anti-roll end cap design• Clear end cap lens for more light on work area• 50 ft. 18/2 SJTOW cord - oil and water resistant• Made in U.S.A.Part number 17-178 (Replacement bulb Number 17-174)

Work Lights

Power Reel LampHeavy duty reel with plated steel guard, on-off switch, 16/3 type SJT cord and 3-hole outlet. 125 volt. UL and OSHA approved. Ceiling or wall mount. Bulb not included.

Part number Cord Length Pkg Qty17-021 35' 1

Trouble LightStandard "drop light" with plated steel guard, on-off switch, 16/3 type SJT cord and 3-hole outlet. 125 volt. UL and OSHA approved. Bulb not included.

Part number Cord Length Pkg Qty17-015 25' 117-016 50' 1

Clamp Light with ReflectorWith swivel adjustment. 125 volt. 18/2 cord is 6 ft long. UL approved. Bulb not included.

Part number Cord Length Pkg Qty17-181 6' 1


13 Watt Twin Tube Compact Fluorescent BulbsCool white bulb fits most 110 volt stubby work lights. Average life: 10,000 hours. GX23 base. Made in U.S.A.

Part number Trade number Pkg17-174 PR13, F13TT/841, CFT13W/GE23/41. 10

15 Watt Fluorescent BulbsCool white bulb for most 15 watt, 2-pin work lights. 110 volts. Made in U.S.A.

Part number Trade number Pkg17-168 ......................... F15T8 ...............................10

Quartz Halogen Light BulbsWhiter, more vibrant light than incandescent bulbs. RSC base/clear. 120 volts.

Part number Watts Volts Pkg Qty17-171 300 120 2017-172 500 120 20

Light Bulbs

Rough Service BulbsFeatures special heavy duty filament design and shorter stem to absorb greater shock and vibration than ordinary bulbs. Frosted bulb. Corrosion resistant medium brass base. Long life. Vibration service - designed exclusively for the automotive industry.

Part number Watts Pkg26-182 50 626-489 60 626-183 75 4826-184 100 30

Tuff-Skin Coated Rough Service BulbsLONG-LIFE 5000 HOUR BULB

The safest, sturdiest bulb ever developed. Reinforced filament support for durability. Shatter-resistant coating prevents fragmentation if broken. Protects personnel and equipment from shattered glass caused by impact, dropping, unusual stress, thermal shock and contact with liquids. UL listed & OSHA approved. Frosted bulb with corrosion resistant medium brass base.

Part number Watts Volts Pkg26-186 75W 130V 6 ea26-188 100W 130V 6 ea


Rubber Cord Connectors All Rubber Cover. Armored Grip U-Blade Parallel Grounding. 15 amps -125 volts. 3-wire grounding. Part number 02-308 Pkg Qty 10

Heavy duty extension CordsSingle outlet. Extra flexible for all-weather use. Oil resistant.Type SJT round cord. OSHA approved.Part number Cord Length Rating Pkg17-023 14/3 25 ft. 15A-125V 117-024 14/3 50 ft. 15A-125V 117-025 16/3 50 ft. 15A-125V 117-028 16/3 100 ft 15A-125V 117-026 12/3 100 ft. 15A-125V 1

Rubber CapsAll Rubber Cover. Armored Grip U-Slot Grounding. 15 amps - 125 volts. 3-wire grounding. Part number 02-309 Pkg Qty 10

Heavy duty Cord ConnectorsUnbreakable Vinyl. U-Blade Parallel Grounding. 15 amps - 125 volts. 3-wire grounding type.Part number 02-311 Pkg Qty 10

Heavy duty CapsUnbreakable Vinyl construction. U-Slot Grounding. 15 amps - 125 volts. 3-wire grounding type.Part number 02-312 Pkg Qty 10

Power Cord Connectors

QuickHeat 1® Commercial Grade electric Heat Gun

Apply heat shrink tubing quickly and without the danger of fire. Comes with medium size heat shrink deflector. For heat-shrink tubing under 1" diameter. Thaws frozen pipes and locks, form or bend plastics, removes ceramic tile, loosens rusted nuts, and solders. Durable high impact housing. Dual heat settings: +750°F and +1000°F. 120 volts, 1200 watts, UL & CSA approved.

Part number 23-311

electric Heat Guns

QuickHeat 2® Industrial Grade electric Heat GunHeavy duty metal housing. Includes large shrink tube deflector for heat-shrink tubing up to 1½" diameter. +750°F - adjustable air flow. All metal housing with adjustable stand. 120 volts, 1680 watts, UL approved.

Part number 23-312

MedIUM SHRInK TUBe deFLeCTOR For QuickHeat 1 only. For tubing sizes up to 1". Part number 23-313

LARGe SHRInK TUBe deFLeCTOR For QuickHeat 1 & 2. For tubing sizes up to 1½". Part number 23-314

Heat Gun Accessories works with 23-312ACCeSSORy KIT for QuickHeat 1 only. Includes 2½" wide paint scraper, pin point nozzle, flat nose nozzle, 4" wide nozzle to protect glass. Part number 23-315


Medium-Wall Tubing with Adhesive Melt Liner

Thick but flexible medium wall with meltable adhesive liner provides totally waterproof electrical connections. Superior resistance to abrasion, salt, water, and corrosive materi-als. 3:1 shrink ratio. Flame resistant. For electronics, plant maintenance, vehicle, boat repair, & O.E.M. applications. Wall thickness1 - 1/16. Wire Inside dia. (in.) 6" Length Pkg 48" Length Pkgdia. Range Color exp.2 Rec. Part number Qty Part number Qty1/8 to 18. Black .125 .0394 17-046 10 17-061 13/16 20-12 Black .187 .0591 17-047 10 17-062 11/4 18-10 Black .250 .0787 17-048 10 17-063 13/8 16-6 Black .375 .1181 17-049 10 17-064 11/2 8-4 Black .500 .1614 17-050 10 17-065 1 1/2 8-4 Red .500 .1614 17-050R 10 17-065 1

Approx. Wire Max. Wall Inside dia. (in.) 12" LengthI.d. Range Color Thickness1 exp.2 Rec. Part number5/16 18-14 Black .060 .300 .100 02-3635/16 18-14 Red .060 .300 .100 02-3647/16 14-6 Black .060 .400 .150 02-3137/16 14-6 Red .060 .400 .150 02-3653/4 8-1 Black .090 .750 .220 02-3143/4 8-1 Red .090 .750 .220 02-3151-1/8 2-4/0 Black .120 1.100 .375 02-3161-1/8 2-4/0 Red .120 1.100 .375 02-3171-1/2 4/0-400 Black .140 1.500 .500 02-3662" 500-1000 Black .155 2.000 .750 02-367

Heavy Wall Heat Shrinkable Tubing with Adhesive Melt LinerHeavy Wall Heat Shrink Tubing has a 3:1 shrink ratio. Application of heat causes an adhesive liner to melt and form intimate contact with all underlying surfaces and voids, yielding a watertight seal suitable for underground applications. Recommended for protecting and insulating splices and terminations. Perfect battery connection insulation. Meets U.L. 486D. requirements. Pkg: 6 each.

1 Maximum wall thickness before shrinking. 2 Tubing is supplied in "Expanded" inside diameter (I.D.) dimensions.

Heat Shrinkable Tubing Assortment160 assorted pieces in 8 sizes and 5 colors. Use with cordless butane heating tools or heat guns. Place over damaged wires to protect against short or shock. Great do-it-yourself product that saves time and money.

Part number 17-035

Compact palm size is perfect for tool kits and field service kits. Produces an adjustable, wind resistant flame with temperatures up to 2500°F/1300°C, perfect for many micro torch applications. Built-in Safety Lock with improved easy to use self-ignition system. Powered by refillable "fuel cell" included with flame adjustment lever. Built-in fuel level viewing window. Pinpoint flame is perfect for soldering, desoldering, heat shrinking & terminating, heating, lighting and many other applications.

Part number 10-724

Flameless Heat Tool

Fuel cells Part number 10-730

3/4 4-3/0 Black .750 .3110 17-051 5 17-066 13/4 4-3/0 Red .750 .3110 17-051R 5 17-066R 11" 2-4/0 Black 1.000 .3937 17-052 5 17-067 11" 2-4/0 Red 1.000 .3937 17-052R 5 17-067R 1


Flashlights and Bulbsduracell duracell Procell Flashlight Black 2d CellOil and chemical resistant Polypro body/head. Computerized parabolic reflector delivers high light transmit-tance. Light weight, No Roll hexagon head shape. Bright Krypton bulb.Use Repl. bulb. #17-037 (PR2).

Part number 17-058

duracell Procell Flashlight Black w/Magnet Oil and chemical resistant Polypro body/head. Computerized parabolic reflector delivers high light transmit-tance. Light weight. No Roll hexagon head shape. Bright Krypton bulb. Comes with a 20 lb. Magnet. Repl. bulb Number 17-037 (PR2).

Part number 17-059

6V Light duty Industrial LanternsThis lantern is not only waterproof, it floats! Provides extra-long power and long beam range. Repl. bulb Number 17-042 (PR13). Uses 6 volt square battery with spring terminals (bat-tery not included).

Part number 17-031

WORKHORSe® FlashlightsRugged housing, switch and bright Krypton bulb. 2 D-Cell repl. bulb: 17-115 (K2) Part number 17-109 2 D-Cell WorkHorse®

Rayovac Industrial 2AA Mini Swivel-Lite 90 degree Swivel Head Part number 17-022

Streamlight Stylus Reach® Series White Led Black Body The Stylus Reach® includes a 7" flexible cable that enables you to see into even the tightest spots. Available with a white LED or blue LED for leak detection. Includes flexible 7" extension cable that allows for 14" of "reach”. High-intensity LED lasts 100,000 hrs. Powered by 3 "AAAA” alkaline batteries. Runs up to 60 continuous hrs. LED available in arctic white (10 lumens) or ice blue 14" extended; 6.75" folded

Part number 17-110

Streamlight Stylus Reach® Series White Led Black BodyStylus flashlights use 3 AAAA batteries and have a 100,000 hour lifetime, high intensity LED. They feature waterproofing, momentary "blink" switch and constant "on" and a clip.

Part number 17-112

Led Head GearOne of the lightest, brightest, most comfortable head-lamps available today. Features High and Low lighting modes and a runtime up to 24 hours. Powered by two 1.5V "AAA” cells included. .5 watt high-flux, 100,000 hour life LED. Up to 14.5 lumens typi-cal and up to 850 peak beam candlepower high mode; 6 lumens typical low mode.Solid State Power Regulator provides maximum light output throughout battery life. Up to 6 hrs, runtime on high mode; up to 24 hrs, on low mode. Impact-resistant, drop-tested housing. Waterproof to 1 meter for 1 hr. Face cap diameter: 1.3" Maximum headlight with: 2.25" Maximum headlight depth: 1.6" including head strap and mounting strap.

Part number 17-034


Part Industry Pkgnumber number Application QtySTANDARD FLANGE BASE17-037 PR2 2, D Cell 10 17-038 PR3 3, D Cell 10 17-039 PR4 2, D Cell 10 17-040 PR6 2, D Cell 10 17-041 PR12 5, D Cell 10 17-042 PR13 6V Cell 10 STANDARD SCREW BASE17-043 14 2, D Cell 10 17-044 222 2, AA Cell 10 KRYPTON FLANGE BASE (2 bulbs per card)17-114 K1 2, C Cell 1 Pkg17-115 K2 2, D Cell 1 Pkg17-116 K3 3, D Cell 1 Pkg17-117 K4 2, AA Cell 1 Pkg17-118 K13 6V Cell 1 Pkg

Krypton bulbs may be substituted for standard flange base flashlight bulbs.

Flashlight Bulbs

Flashlight & Lantern Batteriesduracell® Procell® Alkaline Batteries

Procell® Alkaline batteries deliver outstanding performance and reliability. Internally the same as the Duracell® Coppertop® Battery, Procell® is packaged with the professional in mind. Made in U.S.A.

• Dependable, long lasting power with up to a 7-year freshness guarantee • Operates reliably in temperature extremes of -4° F to 130° F • Date coded to guarantee freshness • Contains no added mercury • Easy to dispense packaging for professional/industrial applications.

description Part number Pkg QtyAAA Cell, 1-½ Volt 13-518 24 eaAA Cell , 1-½ Volt 13-519 24 eaC Cell, 1-½ Volt 13-520 12 eaD Cell, 1-½ Volt 13-521 12 ea9 Volt Transistor 13-522 12 ea3 Volt Lithium CR2032 13-524 6 ea

Alkaline Lantern BatteryLasts twice as long as super heavy duty batteries and provides an extra measure of leakage resistance for critical applications. 99.9% Mercury Free. Made in U.S.A.

description Part number Pkg6 Volt Lantern, spring terminals 13-516 1 ea

®DURACELL is a registered trademark of The Gillette Company.

®DURACELL is a registered trademark of The Gillette Company.


Section 9 AutomotiveAAccessory Bolts 9-3Air Chucks 9-15Alligator Clips 9-9Anderson Connectors 9-6Assortments/Kits

Battery Terminal 9-1

BBall Foot Chucks 9-15Battery

Accessory Bolts 9-3Anti-Corrosion Washers 9-7Bolts 9-2Booster Cables 9-9Cable 9-8

Butt Splices 9-5Crimper 9-8Lug 9-5

Charger Connectors 9-6Hold-Downs 9-4Nuts 9-2Slugs 9-7Starter Lugs 9-5Terminal

Adapters 9-3Brush 9-7Crimping Tools 9-8Lugs, Compression 9-3Lugs, Heavy Duty 9-5Nuts 9-2

Terminals 9-3, 9-4Compression 9-3Crimp/Solder Type 9-2Emergency 9-4Fork Lift 9-6Marine 9-4Military Style 9-4Quick Disconnect 9-6Retro-Fit 9-2Safe-Mate 9-6Side Mount 9-4Top Mount 9-2Truck 9-4

Battery Terminals 9-1FusionTM 9-1

Bolts

Battery 9-2Booster Cables & Clamps 9-9Brake

Fluid Pump 9-16Breakers Circuit 9-12Brushes

Battery Terminal 9-7Bulbs

Headlamp 9-11Miniature 9-10

CCable

Battery 9-8Booster 9-9Cutter (Copper) 9-8Splices 9-5Starter 9-8

Cables, Jumper 9-9Charger Clips 9-9Chucks

Air 9-15Ball Foot 9-15Dual-Foot 9-15Tire 9-15

Circuit Breakers 9-12Clamps

Booster 9-9Muffler 9-11

ClipsAlligator 9-9Charger 9-9Tester 9-9

ConnectorsFork Lift Battery 9-6Pigtail 9-14

CrimperBattery Terminal 9-8

EElectrical

Alligator Clips 9-9Auto Fuses 9-12Auto Light Bulbs 9-10, 9-11Battery Terminals 9-1, 9-3, 9-4Booster Cables 9-9

FFilter Wrench 9-16Flashers 9-12Fork Lift Connectors 9-6Fuseholders 9-13Fuses, Automotive 9-12FusionTM SolderTerminals 9-1

GGlass Fuses 9-12

HHanger Iron 9-10Hangers, Tail Pipe 9-11Headlamps 9-11Hex Crimp 9-8Hold-Downs, Battery 9-4

IInsulators, Alligator Clip 9-9

JJumper Cables 9-9

LLamps

Miniature 9-10Sealed Beam 9-11

LightsMiniature 9-10Sealed Beam 9-11

LugsPower 9-5Starter 9-5

Lugs, Starter 9-3

MMiniature Light Bulbs, 12V 9-10Modular Connectors 9-6Muffler Clamps 9-11

NNuts

Battery 9-2

OOil Filter Wrench 9-16

PPerforated Strapping 9-10Pigtail Connectors 9-14Power Lugs 9-5Pressure

Gauges, Tire 9-16Pump

Brake Fluid 9-16

QQuick-Cutter 9-8


QuickHold Battery Hold-Downs 9-4

RRetro-Fit Terminals 9-2

SSafe-Mate Battery Conn. 9-6Sealed Beam

Headlamps 9-11Solder

Battery Slugs 9-7Starter Cable 9-8Starter Lugs 9-5Strapping

Perforated 9-10

TTail Pipe Hanger 9-11Terminals

Battery 9-1, 9-3, 9-4Butt Connectors 9-5Starter Lug 9-5Starter Lugs 9-5

Tester Clips 9-9Tire

Chucks 9-15Gauge 9-16Inflator/Gauges 9-16Valve Cap 9-15Valve Cores 9-15Valve Extensions 9-15Valve, tubeless 9-15

ToolsBattery Filler 9-7Battery Terminal Crimpers 9-8Cable Crimping 9-8Cable Cutters 9-8Crimping 9-8Oil Filter Wrench 9-16Tire Inflator 9-15Wire Stripper 9-8

TrailerPigtails 9-14

TruckTire Gauge 9-16

Turn Signal Flashers 9-12

VValve Caps 9-15Valve Cores 9-15Valves

Tank 9-15Tire 9-15

WWarning Flashers 9-12Wire 9-8

Battery Cable 9-8Cutter, Copper 9-8Starter 9-8

WrenchesFilter 9-16


CAST COPPeR COnneCTORSPre-loaded with Solder And Flux

FusionTM Battery Connectors are the best connec-tion for long term reliabiltiy on critical applications, especially in presence of corrosion and vibration. FusionTM Battery Connectors come ready-to-use. The flux and solder is precisely pre-measured and loaded in a solderable tin-plated copper connector. FusionTM Battery Connectors provide more consistent quality than any other solder method - including solder slugs. The FusionTM system is complete, offering everything needed to build or repair cables. Easy for inexperienced users., saves time and money. Made in U.S.A.

Cable Top-Post Clamps Heavy WallGauge Color negative Positive Lugs4 Gray 02-411 02-412 02-4231 & 2 Pink 02-413 02-414 02-4241/0 Black 02-415 02-416 02-4252/0 Orange 02-417 02-418 02-4263/0 Purple 02-419 02-420 02-4274/0 Yellow 02-421 02-422 02-428

All Pkg: 5 each

Just Add Heat!

Pre-loaded fluxPre-loaded solder

extra heavy wall thickness

100% cast copper connectors Gauge& polarity

stamped

Barrel chamfered foreasy wire entry

Tin-plating is solderable for maximum pull-out strength & reliability

FAST, QUALITy ReSULTS eVeRy TIMe!

Strip back new battery cable 7/8" and slip heat shrink tubing over cable. Secure connector in vise, apply heat, insert cable, allow to cool, install heat shrink tubing. Note: Clean and prepare old existing cables with liquid flux and a small wire brush before instal-lation. Cleaning not required for new cables.

Solder SystemTM


"RETRO-FiT"Battery TerminalsSide or Top Mount • 100% Cast Copper Alloy

100% Tin Plated • Can be crimped or soldered Use with truck, auto, marine, & heavy equipment

Stack-able for top mount battery applications Die marked for any crimping tool

Does not include Hold-Down Nuts or Side-Mount Bolts

"CRiMp-TiTE"Heavy duty

Battery Terminals100% Cast Copper Alloy • 100% Tin Plated

100% Machine Finished • Can be crimped or sol-dered • Die marked for any crimping tool

Single Barrel Post TypePart no. Cable Size Post Pkg4513 6 ga Universal 54514 4 ga Universal 526-277 4 ga Positive 526-278 4 ga Negative 54515 1 & 2 ga Positive 54516 1 & 2 ga Negative 54517 1/0 Positive 54518 1/0 Negative 54519 2/0 Positive 54520 2/0 Negative 526-190 3/0 Positive 526-191 3/0 Negative 526-192 4/0 Positive 526-193 4/0 Negative 5

double Barrel Post Type (Flag Clamp)Part no. Cable Size Post Pkg26-279 1/0 Positive 526-280 1/0 Negative 526-194 2/0 Positive 526-195 2/0 Negative 526-196 3/0 Positive 526-197 3/0 Negative 526-281 4/0 Positive 526-282 4/0 Negative 5

Single Barrel RetrofitPart no. Cable Size Pkg26-272 6 & 4 ga 526-273 1 & 2 ga 526-252 1/0 526-253 2/0 526-254 3/0 526-274 4/0 5

Double Barrel RetrofitPart no. Cable Size Pkg26-255 1/0 526-256 2/0 526-257 3/0 526-276 4/0 5

Meets OEM, SAE and Mil specifications. zinc finish.

Part no. Item Pkg26-465 1/4-20 x 1-1/4 sq. hd. bolt (only) 1004573 5/16-18 x 1-1/4 sq. hd. bolt w/nut 1004574 5/16-18 x 1-3/8 sq. hd. bolt w/nut 1004575 5/16-18 collared nut (only) 1004568 3/8-16 side-mount battery bolt 1026-258 3/8-16 stud-top nut 10

Square Hd. Bolt Side-Mount Stud-top with Collared Nut Bolt Nut

Battery Bolts & nuts


Compression Battery Terminals & LugsGreat for in-the-field repairs. Made from 100% cast copper. Double tin plated and color coded.

Complete with compression nuts, battery bolts, and shoulder nuts.

UNIVERSAL POST (fits both positve and negative posts). All Pkg: 5 each

Cut-away view Assembles with common hand tools.

Cable Straight Flag Heavy Wall Lugs Compression Gauge Color Clamps Connectors 3/8" hole 1/2" hole nuts4 Gray 26-433 26-439 26-445 - 26-4531 & 2 Green 26-434 26-440 26-446 - 26-4541/0 Black 26-435 26-441 26-447 26-449 26-4552/0 Orange 26-436 26-442 26-448 26-450 26-4563/0 Purple 26-437 26-443 - 26-451 26-4574/0 Yellow 26-438 - - 26-452 26-458

Top Post Side Post

Battery Accessory Bolts

Connect accessories directly to your battery. Ideal for radios, lights, winches, and hydraulic pumps.

1/4 x 5/16 Top Post Adapter nutReplaces 1/4-20 collared nuts on top post batteries. Includes 5/16-18 x 3/4 stud for accessory wires. Pkg: 10 each. Part no. 26-466

5/16 x 5/16 Top Post Adapter nutReplaces 5/16-18 collared nuts on top post batteries. Includes 5/16-18 x 3/4 stud for accessory wires. Pkg: 10 each. Part no. 26-467

3/8 x 3/8 Top Post Adapter nutReplaces 3/8-16 collared nuts on top post batteries. Includes 3/8-16 x 3/4 stud for accessory wires. Pkg: 10 each. Part no. 26-467B

Side Post Adapter BoltReplaces regular 3/8-16 side terminal battery bolts. Includes 5/16-18 x 1/2" stud for accessory wires. Pkg: 10 each. Part no. 26-468


emergency Battery TerminalFor automotive use. Made of lead.

Part no. Cable Size Polarity Pkg4500 2 ga. - 2/0 Universal 10

diesel Truck/Military TerminalLow profile, only 11/16" high. Long bolt (2¼") permits multiple or parallel connections. Made of lead. Meets MS75004-1 and MS75004-2.

Part no. Stud Size Polarity Pkg4510 3/8-16 Universal 5

Emergency Battery Terminals are designed for a "quick-fix" when a more permanent repair is not practical. As soon as possible, replace any clamp-type terminal with a permanent environmentally sealed connection such as our CRIMP-TITE BATTERY TERMINALS (Crimp or use Solder Slugs) or compression battery terminals, each one should be fitted with heavy wall heat shrinkable tubing.

emergencyHeavy duty Truck Terminal

For trucks and heavy equipment. Made of lead.

Part no. Cable Size Polarity Pkg4501 1 ga.- 4/0 Universal 10

emergency Side-Mount Battery Terminal

Universal stud size. Made of lead.

Part no. Cable Size Polarity Pkg4503 2 ga. - 2/0 Universal 10

emergency Style Battery Terminals

Brass Marine Battery TerminalLead plated. Wing nut included.

Part no. Stud Size Polarity Pkg4605 3/8-16 Positive 54606 5/16-18 Negative 5

QuickHoldTM Battery Hold-downs

• Adjustable • Locks securely• Corrosion proof • Nonconductive

VentPart Min. Max. Coverno. Length Length Style4616 5-3/4" 8-1/2" Flush4617 8-1/4" 13-1/4" Flush4618 5-1/4" 7-1/2" Offset*

*Use offset style for raised vent cover applications.


Starter Lugs

Crimp starter lugs with the same die setting as the battery terminals! Wall thickness is 80% thicker than standard lugs for increased conductivity and greater crank force. Wide pads for more surface contact. Color-coded and die-stamped to match most crimping dies. May be crimped or soldered. Use power lugs in the most demanding applications: trucks, buses and heavy equipment. 100% copper, tin plated.

Part Cable Stud Thick Overall Color/ Pkgno. Size Size -ness Length die Setting Qty2013B 6 1/4" 0.110" 1.350" BLUE (K-K) 102014B 6 5/16" 0.110" 1.350" BLUE (K-K) 102016B 4 1/4" 0.120" 1.495" GRAY (J-H) 102017B 4 5/16" 0.120" 1.495" GRAY (J-H) 102018B 4 3/8" 0.115" 1.495" GRAY (J-H) 102024B 1 & 2 5/16" 0.165" 1.850" PINK (H-H) 52025B 1 & 2 3/8" 0.165" 2.008" PINK (H-H) 52026B 1 & 2 1/2" 0.165" 2.205" PINK (H-H) 52029B 1/0 3/8" 0.130" 2.000" BLACK (E-A) 52030B 1/0 1/2" 0.130" 2.000" BLACK (E-A) 52033B 2/0 3/8" 0.130" 2.250" ORANGE (A-C) 52034B 2/0 1/2" 0.130" 2.250" ORANGE (A-C) 52037B 3/0 3/8" 0.170" 2.430" PURPLE (A-B) 52038B 3/0 1/2" 0.170" 2.430" PURPLE (A-B) 52041B 4/0 3/8" 0.180" 2.500" YELLOW (A-A) 52042B 4/0 1/2" 0.180" 2.500" YELLOW (A-A) 5

extra Thick Power Lugs

Double flared for easy entry. Crimp or solder.Tin plated copper construction.

Part Wire Pkgno. Size Length Qty02-300 6 ga. 1.075 2502-301 4 ga. 1.215 1002-302 2 ga. 1.350 1002-303 1 ga. 1.350 1002-304 1/0 1.550 502-305 2/0 1.800 502-306 3/0 1.900 502-307 4/0 2.000 5

Cable Splices

Standard thickness. Flared ends for easy entry. Can be crimped or solder. High grade copper construction.

Part Wire Stud Pkgno. Size Size Qty2013 6 ga 1/4 252014 6 ga 5/16 252016 4 ga 1/4 252017 4 ga 5/16 252018 4 ga 3/8 252020 2 ga 5/16 252021 2 ga 3/8 252022 2 ga 1/2 252024 1 ga 5/16 252025 1 ga 3/8 252026 1 ga 1/2 252029 1/0 3/8 252030 1/0 1/2 252033 2/0 3/8 252034 2/0 1/2 252037 3/0 3/8 102038 3/0 1/2 102041 4/0 3/8 102042 4/0 1/2 10


Industrial Battery Connectors(Also called Anderson® Connectors, Fork Lift Connectors or Modular Connectors)

Provides a quick, safe and reliable way to connect booster cables and charging systems. Nonconductive and high impact polycarbonate housings can be screw-mounted to vehicles' frame for permanent installation and to prevent broken contacts. Silver plated copper contacts deliver maximum current and long life. Flared barrel for easy installation. Uses: fork lift trucks, golf cars, remote starters, booster and charger hookups.

Housings are now color-keyed!This means gray housings will only plug into gray housings. Gray housings won't plug into red or blue housings. Similarly, red housings plug into other red housings, not blue housings. The color-keyed feature makes it possible for you to differentiate voltage of your electrical circuits. For example if you don't want to plug a 36 volt battery pack into a 48 volt charger.

Industry recommendations are as follows: Housing VoltageRed 24Gray 36Blue 48

Part Housing Cable Barrelno. Amperage Color Size I.d.26-481 50 Red 6 .221"26-482 175 Red 1/0 .437"26-483 350 Red 2/0 .484"

26-459 50 Gray 6 .221"26-460 175 Gray 1/0 .437"26-461 350 Gray 2/0 .484"

26-484 175 Blue 1/0 .437"26-485 350 Blue 2/0 .484"

Pkg: 1 each*(Order 2 units for new installations.)

SAFE pOLARiTY pROTECTiONCOLOR-KEYEd FOR VOLTAGE

pROTECTiON!

SELF-MATiNG HOUSiNGS!

*NOTE: Order 2 units when needed, especially when installed for the first time. Although connectors are sold individually (1 housing and 2 contacts) when needed, more than one unit is usually required on many installations.

HiGHEST QUALiTY - UL®, CSA®, iSO®

Protective Caps

Protect contacts from dirt, dust and road salt. Molded tether attaches cap to connector housing preventing loss. Color: black. Pkg: 5 each

Part Fits Connectorno. Size26-486 50 amps26-487 175 amps26-488 350 amps


Battery Terminal Solder Slugs

InSTALLATIOnTools required: utility knife, propane torch and bench vise.

STRIP THE PROPER SIzE CABLE so that the exposed cable will reach all the way to the bottom of the bat-tery terminal or lug, making sure the insulation fits snugly against the top.

PLACE THE PROPER BATTERY SLUG INTO TERMINAL. Secure the battery terminal in vise. Slide the proper size shrink tubing over the cable. Apply several drops of liquid flux to the exposed wire.

HEAT BASE OF TERMINAL while applying gentle downward pressure on the cable. Allow the cable to slide into the terminal until the insulation is snug against the top of the terminal. Remove the heat.

INSTALL SHRINK TUBING. Slide the heat shrinkable tubing over the con-nection and apply indirect heat to the tubing. Allow the assembly to cool down before installation.

Pre-measured, pre-fluxed pieces of solder that have been sized to pro-vide the correct amount of solder for each size of cable connectors. Color coded to industry standards. Battery Slugs provide a simple and cost ef-ficient way to achieve a perfect connection.

AdVAnTAGeS• Better contact; less voltage drop at connection.• Use with top-post clamps, side-post clamps, stud-post clamps, and all starter lugs.• Little training or operator skill required.• No crimping, therefore no punctured insulation.• No need for expensive crimping tools.

Part no. Size Color Qty02-368 4 ga. Grey 1202-369 2 ga Green 1202-370 1 ga Pink 1202-371 1/0 Black 1202-372 2/0 Orange 1202-373 3/0 Purple 602-374 4/0 Yellow 621-324 Liquid Flux, 4 oz. bottle 1

Protective washers made of nonwoven material, im-pregnated with anti-corrosive inhibitors. Prevents power robbing corrosion build-up on top post and threaded stud battery terminals. 100 per metal can.

Part no. Color Pkg QtyQC-6622-100B Black 1 canQC-6622-100R Red 1 can

Battery MaintenanceBattery Terminal

Protective Washers

Battery Filler Bulb

Rubber bulb has 6 oz. capacity. Ideal for all fluids includ-ing battery acid. 6" vinyl spout for easy vent access. Part no. 4608

Battery FillerShuts off automatically when battery cell is at proper level. 2 quart capacity. Use with battery acid or water. Part no. 12-75030

Removes corrosion and dirt from cable clamps and terminal posts. Metal housing. Part no. 4578

Battery Terminal Brush


Cuts copper cable up to 250 MCM (6/0). Insulated handles. Length: 24". Can be resharpened. 6 month limited warranty. Does not cut steel. Part no. 4615

Quick-Cutter 1

Cuts all copper cable thru 2/0. Made of forged steel. Insulated handles. Length: 9". 6 month limited warranty. Does not cut steel. Part no. 4614

Quick-Cutter 2

Features:• Unique "Hex" crimping dies• Fully insulated handles.• Rotating dies mean no loose pieces.• Ability to crimp all crimp-able terminals.• Solid construction.

2-yeAR LIMITed WARRAnTy

Part no. Crimp Range Length1090 6 ga. to 4/0 26"

The Hex CrimpBattery Terminal Crimping Tool

Stranded copper wire. Tough polyvinyl chloride insulation. Weather and acid resistant.

Part Conductor Pkgno. Color Gauge diameter* Qty4560 Black 6 .210" 50'4560R Red 6 .210" 50'4561 Black 4 .244" 25'4561R Red 4 .244" 25'4562 Black 2 .322" 25'4562R Red 2 .322" 25'4563 Black 1 .370" 25'4563R Red 1 .370" 25'4564 Black 1/0 .417" 25'4564R Red 1/0 .417" 25'4565 Black 2/0 .473" 25'4565R Red 2/0 .473" 25'4566 Black 3/0 .523" 25'4567 Black 4/0 .604" 25'TIP: Always install the same size or heavier (never lighter). In cold climates, use a heavier cable to improve starting.

Battery Cable

Battery Cable Crimping Tool

FOR USe WITH HAMMeR OR VISeInexpensive, simple crimper for use with 8 - 4/0 gauge connectors. Scale on the side of tool assures proper crimping. Spring loaded pin locks in "up" position for loading. When released, pin hold connector securely during crimping. 6 month limited warranty. Part no. 4521


Part no. Amp Length Style Pkg4588 10 2" Non-insulated 104589 10 2" Red vinyl sleeve 104590 10 2" Black vinyl sleeve 10

Alligator Clip InsulatorsPart no. Color Pkg4591R Red 104591B Black 10

Booster Cables, Clamps & Alligator Clips

Non-InsulatedColor-Coded Vinyl Sleeves

Alligator ClipsNickel Plated Steel

Heavy duty Booster Cables& Clamps

Tangle-free cable, 100% fine stranded copper wire.

Part no. Amps Length Wire Pkg4583 400 20 ft. 4 ga. 1 set02-347 500 20 ft. 2 ga. 1 set

REPLACEMENT BOOSTER CLAMPS02-349 Parrot style, 500 amp, red/black 1 pr

800 Amp Super Clamps

Use to to build or repair your own super duty booster cables. 800 amp capacity. Ideal for truck, bus, farm, commercial and industrial applications. Jaws grip top-post, stud and side-post terminals. Red and black insulated grips. Heavy duty plated steel springs and solid copper contacts. Pkg: 1 PAIR**. Part no. 02-349B

*Cable Lugs not included. **Sold in pairs only (1 red, 1 black).

Standard Booster Cables& Clamps

Tangle-free cable, 100% fine stranded copper wire.

Part no. Amps Length Wire Pkg4582 400 12 ft. 4 ga. 1 set

REPLACEMENT BOOSTER CLAMPS4585 Standard 400 amp, red/black 1 pr

Tester ClipsPlated steel.

Part no. Amp Length Pkg4592 10 2" 104593 25 2-3/4 104594 50 4-1/4” 5

Part no. Amp Color Pkg4595 50 Red 54596 50 Black 5

Insulated Charger Clips

Heavy duty 50 amp capacity exceeds most on the market. Color coded vinyl boots protect crimp ears.

Accepts size 1 ga. to 3/0 lugs*


Miniature Light Bulbs

Automotive BulbsAll 12 Volts • Pkg: 1 (10 per pkg)

Part Industry Typical Bulbno. no. Applications Type26-093 53 Indicator 426-096 57 Instrument 426-099 67 Parking 426-330 74 Indicator/Radio 1426-101 89 Dome/Trunk 426-102 90 Dome/Trunk 1326-104 97 Dome/Instrument 426-106 158 Instrument 226-109 194 Instrument 226-110 194A Instrument 226-389* 194NA Parking 226-114 211-2 Dome/Trunk 626-333 906 Courtesy 226-334 912 3rd Stop 1026-391 916 Parking 1026-335 921 3rd Stop 1026-119 1003 Dome/Interior 326-120 1004 Dome/Engine 126-123 1073 Front Turn 326-126 1141 Rear Turn 326-130 1156 Front Turn 326-131 1157 Stop/Turn 126-132 1157A Front Turn 126-133* 1157NA Front Turn 126-141 1816 Instrument 526-144 1893 Instrument 526-145 1895 Instrument 426-134 2057 Stop/Turn 126-135* 2057NA Front Turn 126-136 2357 Stop/Turn 126-137* 2357NA Turn/Parking 126-394 2396 Turn/Park 326-138 3057(2358,2457) Stop/Turn 726-139* 3057NA(2358NA,2457NA) Turn/Parking 726-127 3157(2359,2459) Stop/Turn 726-128* 3157NA(2359NA,2458NA) Turn/Parking 726-336 3155 3rd Stop 726-337 3156 Corner/Backup 726-396 DE3175 Dome 9

* NA: Natural amber glass, not a coating.

TyPe 13 TyPe 14 TyPe 15





Perforated Strapping(Hanger Iron)

Galvanized malleable steel strapping used for hanging mufflers, fixtures, pipes, drains, conduit, air ducts and more. Comes with 1/4" holes on 1/2" centers.

Part Thick Pkgno. Width Length -ness Qty1834 3/4" 10ft. .035" 10


Sealed Beam Headlamps

Part Industry Pkgno. no. description Qty INCANdESCENT26-149 6014 7" Round, Hi-Lo 12 26-150 4651 4"x6.5" Rect., Hi 12 26-151 4652 4"x6.5" Rect., Lo 12 26-187 6052 5.63x7.88 Rect.,Hi-Lo 12HALOGEN26-320 H-5006 5.75" Round, Lo 6 26-321 H-5001 5.75" Round., Hi 626-322 H-6024, 7" Round., Hi-Lo 6 (Replaces 6014, H-6014 and H-6017)26-323 H-4651 4"x6.5" Rect., Hi 6 26-324 H-4656 4"x6.5" Rect., Lo 6 26-325 H-6054 5.63x7.88 Rect.,Hi-Lo 6TRACTOR/TRUCK26-338 4411 4.5" Tractor/Utility 626-339 4412 5" Auto Fog/Driving 12 26-341 4416 4" Spot Lamp 12 26-342 4419 5" Tractor/Utility 1226-344 4509 4" Tractor/Utility 1226-345 4537 5" Tractor/Utility 12 26-346 6015 7" Tractor 12

Late Model Halogen Bulbs

Part Industry Pkgno. no. description Qty 26-326 9004 Hi-Lo 10 26-327 9005 Hi 10 26-328 9006 Lo 10 26-347 9007 Hi-Lo 10

For 12 volt systems. Imported.

For 12 volt systems. Made in U.S.A.

Muffler Clamps

Tail Pipe Hangers

Part Pkgno. Size QtySTAndARd 5/16" dia. U-bolt, standard saddle.26-156 2" 1226-158 2-1/2 12HeAVy dUTy 3/8" dia. U-bolt, heavy duty saddle.26-161 1-3/4 1226-162 1-7/8 1226-163 2" 1226-165 2-1/4 1226-166 2-1/2 1226-170 2-3/4 1226-171 3" 626-173 3-1/2 626-174 4" 626-175 4-1/2 626-176 5" 6

Universal 360° swivels and pivots left or right. Bends to fit most any application. Installs without disassembling muffler clamps. Overall length: 9½".Pkg: 6 each.

Part no. 26-180


Automotive Glass Fuses

• AGC Type - All Glass• SFE Type - Society of Fuse EngineersPacked 5 per inner sleeve, 5 sleeves per box.

Part no. Industry no. Length Pkg26-012 AGC 1 1-1/4" 2526-014 AGC 2 1-1/4" 2526-017 AGC 4 1-1/4" 2526-018 AGC 5 1-1/4" 2526-020 AGC 7-1/2 1-1/4" 2526-021 AGC 10 1-1/4" 2526-022 AGC 15 1-1/4" 2526-023 AGC 20 1-1/4" 2526-024 AGC 25 1-1/4" 2526-025 AGC 30 1-1/4" 2526-046 SFE 4 5/8" 2526-049 SFE 9 7/8" 2526-050 SFE 14 1-1/16" 2526-051 SFE 20 1-1/16" 2526-052 SFE 30 1-7/16" 25

Part Industr Pkgno. no. Color Qty26-053 ATO-3 Violet 2526-054 ATO-4 Pink 2526-055 ATO-5 Tan 2526-056 ATO-7½ Brown 2526-057 ATO-10 Red 2526-058 ATO-15 Blue 2526-059 ATO-20 Yellow 2526-060 ATO-25 White 2526-061 ATO-30 Green 25

Color-coded miniature blade style fuses. Packed 5 per inner sleeve, 5 sleeves per box.

Part Industry Pkgno. no. Color Qty02-400 ATM-2 Gray 2502-401 ATM-3 Violet 2502-402 ATM-4 Pink 2502-403 MIN-5 Tan 2502-404 MIN-7½ Brown 2502-405 MIN-10 Red 2502-406 MIN-15 Blue 2502-407 MIN-20 Yellow 2502-408 MIN -25 White 2502-409 MIN-30 Green 25

ATO® Blade FusesColor coded standard bladestyle fuses. Packed 5 per inner sleeve, 5 sleeves per box. Interchanges with ATC fuses.

ATM Mini® Blade Fuses

Part Industr Pkgno. no. Color Qty02-455 MAX-20 Yellow 202-456 MAX-30 Green 202-457 MAX-40 Orange 202-458 MAX-50 Red 202-459 MAX-60 Blue 2

Maxi® Blade Fuses

Color coded large blade style fuses. Packed 1 per inner sleeve, 2 sleeves per box.

Automotive Flashers

Part Trade Pkgno. no. Voltage Prongs Qty26-089 552 12 2 526-090 550 12 3 5

Standard Thermal Flashers

Stud Type

• 6, 12, & 24 Volt • Automatic reset

Part no. Amp Pkg26-064 10 526-065 15 526-066 20 526-067 25 526-068 30 526-069 40 5

Circuit Breakers


Waterproof Glass Fuse Holder

For 1/4 x 1¼" automotive glass fuses only.One piece molded thermo-plastic fuse holder accepts wire sizes 12 gauge to 18 gauge and is not waterproof if used with other wire sizes. Furnished without fuse. Pkg: 5 each. Part no. 26-082

In-Line Fuse Holder with FuseAutomotive glass fuses included. Supplied with 4"

long wire leads.

Part Fuse Wire Pkgno. Size Gauge Qty26-085 8 amp 14 ga. 1026-087 20 amp 12 ga. 1026-080 30 amp 12 ga. 10

Automotive FuseholdersATC® Blade Fuse Holders

Supplied with 4" long wire leads. For ATC (ATO) blade fuses only. Furnished without fuse.

Part Wire Pkgno. Amps Size Qty26-083 20 16 gauge 1026-084 30 12 gauge 1026-084FC Fuse Cover, clear* 10*Fuse Cover protects from dirt and impact. Fits 26-083 & 26-084

Maxi® Blade Fuse Holder

Supplied with two heavy 6 ga. 5" long wire leads. Range 20 to 60 Amps. Fire wall mounting hole permits two or more holders to be mounted together. Cover comes with a removable strap. Furnished without fuse. Pkg: 1 each. Part no. 02-460

Waterproof ATM Mini® Blade Fuse Holder

Supplied with two 12 ga. 4" long wire leads. For use with 2 to 30 amp ATM mini blade fuses. Waterproof for applications where moisture and corrosion is a problem. Cap has positive snap action for tight fit. Furnished without fuse. Pkg: 5 each. Part no. 02-490

Weatherproof ATC® Blade Fuse Retainer

A premium quality insulated-weather-proof fuse retainer with mounting bracket. 30 Amp max. 12 gauge leads. Furnished without fuse. Pkg: 5 each. Part no. 26-088

Fuse Cover (sold separately)

AGC/ATC Fuse Puller

Extracts most automotive glass fuses and standard ATC blade fuses. Pkg: 5 each. Part no. 02-491


Pigtail Connectors

Aligned Indexed

Single Contact Pigtail Connectors

Part no. Base Pkg26-301 Regular 10

Single Contact Waterproof Pigtailfor all single contact regular base bulbs

Part no. Base Pkg26-304 Rubber 10

double Contact Pigtail Connectors

Part no. Base Type Pkg26-302 Regular Aligned 1026-303 Regular Indexed 10

double Contact Waterproof Pigtailfor all double contact regular base bulbs

Part no. Base Type Pkg26-305 Rubber Aligned 10

Six Pole Shrouded Connectors5 male, 1 female. Mates with #26-317. 12" leads

. Part no. 26-316 Pkg: 5 each

Six Pole Shrouded Connector1 male, 5 female. Mates with #26-316. 12" leads.

Part no. 26-317 Pkg: 5 each

Four Wire Trailer Connector1 male, 3 female. Mates with #26-314. 12" leads.


Four-Wire Trailer Connector3 male, 1 female. Mates with #26-315. 12" leads.



Tire Valve extensions

Extend valve length for total servicing through wheel covers. Inflate, deflate, pressure check. No removal required.

Part no. Length Pkg451 3/4" 25452 1-1/4 25454 2 25

Standard Locking Clip

Air Tank Valves

For use on pressure tanks, air horns, air lifts, com-pressors and other pneumatic devices. 1/8" male pipe thread. Length: 23/32" from hex to top of valve stem. Part no. 12-47951 Pkg: 2 each.

Tire HardwareTubeless Tire Valves

Part Rim Pkgno. Hole dia. Length Qty413 .453" 1¼ 10414 .453" 1½ 10418 .453" 2" 10423 .453" 2½ 10415 5/8" 1¼ 10425 5/8" 2" 10

Ball Foot Chucks1/4" female pipe thread.

Part no. description Pkg12-17351 Standard Chuck 112-17353 Locking Clip Chuck 1

NOT fOr uSe ON INfLATOr gAugeS....These chucks are intended for use on air supply lines that come directly

from the compressor, with no other valve in the line. Direct airline chucks have a shut off valve built into the chuck head.

Lock-On Air ChuckEspecially useful for large truck and tractor tires. Locks onto valve when pushed on, remove by pull-ing back on quick-release sleeve. 1/4" female pipe thread. Not for use with inflator gauges. Part no. 12-060

4-Way Tire Valve Repair Tool

Removes valve cores, repairs internal and external threads on valve and has an "easy-out" for removing broken valve cores. Part no. 12-47067

Valve CoresPart no. 12-47201 Pkg: 100 each

Plastic Valve CapsPart no. 12-47105 Pkg: 100 each

Chrome Valve CapsPart no. 12-47112 Pkg: 100 each

1/4" female pipe thread. Not for use with inflator gauges. Part no. 690

dual-Foot extension Chuck


Tire Hardware

dual-Foot Truck Tire Gauge

Passenger Car dial Tire Gauge

Rugged construction to withstand everyday use and abuse. 5 to 60 lbs. For passenger cars and light trucks. Part no. 12-17551

Dual head chuck for truck tire valves. Rugged construc-tion to withstand everyday use and abuse. 10 to 150 lbs. Part no. 12-17545

Dual range — 0-160 psi in 2 lb increments and 0-1100 kPa in 20 kPa increments. PSI black, kpa red. Swivel angle chuck, all chrome plated fittings, and a push-button valve to bleed off excess pressure. Use on trucks or cars. Part no. 12-061

Dual range — 10 to 50 psi in 1 lb. increments and 70-350 kpa in 10 kpa increments. Recessed deflator pin machined in chuck head. Pocket clip. Length: 5-3/4". Part no. 12-17509

Dual range — 20-120 psi in 2 lb increments and 160-880 kpa in 20 kpa increments. Features bright chrome plating, recessed deflator pin machined in chuck head and a handy pocket clip. Length: 5-3/4".Part no. 12-17519

Pocket Size Auto Tire Gauge

Pocket Size Truck Tire Gauge

dial Truck Tire Gauge

Swivel OilFilter Wrench

Brake Fluid Pump

Dispenses approximately one ounce of fluid per stroke. Fits all standard one gallon cans. Comes complete with 36" flexible tubing with check valve in metal nozzle. Used with penetrants, model airplane fuel, and most any petroleum based products. Part no. 12-70060

Unique swivel design offers flexibility for those hard to reach filters. Fits large filters 3-1/2" to 3-7/8" diameter. Constructed of heavy steel with a vinyl handle for a firm grip. Part no. 12-70713


Symbols12-Volt Rechargeable Battery 10-68

AAdapters

Hydraulic 10-58Air Brake

FittingsCopper Tube 10-15Hose, Type B 10-34Nylon (NTA) 10-16, 10-17Push-In 10-21

Hose, Type B 10-4Tubing, Nylon 10-4

Air ChucksQuick Disconnect 10-34, 10-38

Air Cocks, Brass 10-27Air Couplers

Quarter Turn 10-49Quick Disconnect 10-34Straight Thru 10-38

Air Gauge 10-45Air Hose

Crimper 10-46Push On 10-2Rubber 10-1Self-Storing 10-1

Air LineFilters 10-44Lubricators 10-44Manifold 10-44Pressure Gauges 10-45Regulators 10-44

Air Tank Pop-Off Valves 10-28Assortments/Kits

Clamps 10-6Fittings

Hydraulic Hose 10-57Parker Hose Ends 10-57Pipe (iron) 10-33

Hose Clamps 10-6

BBall Valves 10-29Battery

Rechargeable 10-68Bend Protectors, Hose 10-1Brake Line Racks 10-24

Brake Lines 10-24

CCaps

Grease Fitting 10-65Caps, Vacuum 10-47Chicago Fittings 10-49Chucks

Air, Quick Disconnect 10-34, 10-38

ClampsDouble Bolt 10-49Hose 10-6Hose Ferrules 10-46

Combination Nipples 10-50Cordless Grease Gun 10-68Coupler Manifold 10-44Couplers

1/4 Turn Air (Chicago) 10-492-Lug 10-4960 Series 10-393000 Series 10-426100 Series 10-436600 Series 10-41Aro Series 10-36Chicago 10-49Connect Under Pressure 10-43Garden Hose 10-48Grease Fitting 10-66Grease Gun 10-66Hydraulic 10-39, 10-43Industrial Series 10-34, 10-35Lincoln Series 10-36Pioneer Series 10-40Push To Connect 10-38Quick Disconnect 10-34, 10-43Straight Thru Series 10-38Thread-To-Connect 10-43Tru-flate Series 10-37

Couplings, Hose 10-46Crimper

Air Hose 10-46

DDayco Crimp Fittings 10-52, 10-54Dayco Hydraulic Hose 10-2, 10-4Drain Cocks, Brass 10-27

F

FerrulesAir Brake Hose 10-34Air Hose 10-46Tubing

Copper 10-12Copper A/B 10-15Nylon A/B 10-16, 10-17Polyethylene 10-20

Filler Nipples 10-66Filters

Air Line 10-44Fittings

Adapters 10-58Air Brake

Copper Tube 10-15Hose, SAE 100R5 10-51Hose, Type B 10-34Nylon (NTA) 10-16, 10-17Push-In (DOT) 10-21

Air Hose1/4 Turn/Chicago 10-492-Lug 10-49Couplers 10-34, 10-38Ferrules 10-46Jack Hammer 10-49Quick Disconnect 10-34, 10-38Reusable 10-46Swivels 10-44

Air Manifold 10-44Barbed

Brass 10-46Combination 10-50Fuel & Heater 10-47Garden Hose 10-48King 10-50Multi. 10-46Plastic 10-47Steel 10-50Vacuum 10-47Wiper 10-47

Brake Line 10-14Compression

Copper A/B 10-15Copper (Std.) 10-12Nylon A/B (NTA) 10-15

Couplers 10-34, 10-38, 10-43Crimp

Dayco 10-52Hose Ferrules 10-46Parker 10-54

Section 10 Hose & Fittings


FlareBrass, SAE 45° 10-18Steel, JIC 37° 10-58, 10-61

Garden Hose 10-48Grease 10-65Hydraulic

Adapters 10-58Coupler Dust Caps 10-39, 10-43Coupler Mounting Flange 10-43Couplers 10-39, 10-43Crimp 10-52Crimp (Dayco) 10-52, 10-54Crimp (Parker) 10-54Reusable 10-51, 10-52

Inverted Flare, Brass 10-14Lubrication 10-65O-Ring Adapters 10-61, 10-63Pipe

Brass 10-25, 10-27Iron 10-30Malleable Iron 10-30Steel, Hi Pressure 10-62Steel, Low Pressure 10-30Swivel 10-62

Push-In 10-21Quarter Turn Air Couplings 10-49Quick Disconnect 10-34, 10-43Reusable

Air Brake 10-51Air Hose 10-46Hydraulic, SAE 100R2 10-52Hydraulic, SAE 100R5 10-51

Steel Barbed Type 10-50Vacuum & Windshield Washer 10-

47FRL's 10-44Fuel Line Hose 10-3

GGarden Hose 10-48

Fittings 10-48Nozzles 10-48Quick Disconnect Couplers 10-48Washers 10-48

Gate Valves, Bronze 10-29Gauges

Pressure 10-45Grease Fittings

Accessories 10-66Standard & Metric 10-65

Grease Gun Coupler 10-66Grease Guns 10-67Grease Hose 10-67

HHeater Valves 10-29Hose

AirCoiled 10-1Multi-Purpose Neoprene 10-1Push On 10-2

Air Brake, Type B 10-4Bend Protectors 10-1Coiled 10-1Contractors 10-48Cutters 10-5Garden 10-48Grease Gun 10-67High Pressure 10-3High Pressure, SAE 100R2 10-2Hydraulic

SAE 100R2AT 10-3Lock-On 10-2Low Pressure

Air 10-1Push On 10-2SAE 30R2 10-2SAE 100R4 10-2Shop 10-1

Nylon Coil 10-1Poly-Air 10-1Polyurethane Self-Store 10-1Pressure Washer 10-3Push-On 10-2Return Line 10-2SAE 100R1 10-2SAE 100R2 10-3Silicone Heater 10-3Strain Relievers 10-1Suction 10-2Vacuum 10-4Water 10-48Whips

Grease Gun 10-67Windshield/Vacuum 10-4Wiper 10-4

Hose Clamp Rack 10-6Hose Clamps 10-6Hose Crimper 10-46Hose Ends 10-46

Dayco 10-52Parker 10-54

HydraulicBrake Lines 10-24Couplers 10-39, 10-43Grease Fittings 10-65Hose

SAE30R2 10-2SAE 100R2 10-3SAE100R4 10-2

KKing Nipples 10-50

LLube Gun 10-67, 10-68Lubrication Fittings 10-65Lubricators, Air Line 10-44

MManifold, Air Coupler 10-44

NNeedle Valves 10-28Nozzles, Water 10-48

OOilers (Airline Lubricator) 10-44

PParker Crimp Fittings 10-3Parker Hydraulic Hose 10-3Pins

Hairpin Cotter 10-49Pop-Off Valves, Safety 10-28Power-LuberTM

12-Volt Cordless Grease Gun 10-68

PressureGauges, Air 10-45Regulator 10-44

Pressure Washer Hose 10-3Push-On Hose 10-2

QQuarter Turn Air Couplings 10-49Quick Disconnect

Air Couplers 10-34, 10-38Garden Hose Couplers 10-48Hydraulic Couplers 10-39, 10-43

RRack

Hose Clamp 10-6Radiator Drain Valves 10-27Rubber

Garden Hose 10-48

MAINTENANCE PRODUCTS INC. • (800) 523-2367 (219) 696-6411 10-III

Seals (Chicago Ftgs) 10-49Vacuum Caps 10-47

SSafety

Pop-Off Valves 10-28Seals

Air Coupler (Chicago) 10-49Separators (Filters) 10-44Shop Air Hoses 10-1Strain Reliever, Hose 10-1Suction Hose 10-2Swivels

Air Hose 10-44Grease Gun 10-66

TTechnical Data

Fitting Measurement 10-8Fitting Sizes 10-9Hose Clamp Sizes 10-7Pipe Sizes 10-10, 10-11Pipe Thread Sealing Tips 10-11

ToolsDrive Type Grease Fitting 10-65Grease Fitting Driver 10-66Grease Guns 10-67, 10-68Hose Crimper 10-46Power-LuberTM 10-68

TubingAir Brake 10-4Clear Vinyl 10-5Copper 10-5Cutters

Plastic 10-5Hydraulic Brake 10-24Nylon Air Brake 10-4Polyethylene 10-5Steel 10-24Vacuum 10-4Vinyl 10-5Windshield & Vacuum 10-4Wiper 10-4

VVacuum Caps 10-47Valves

Air Brake 10-27Ball 10-29Drain 10-27Gate 10-29Heater 10-29

Needle 10-28Safety Pop-Off 10-28

WWashers

Garden Hose 10-48Water Nozzle 10-48"Wet-Line" Hydraulic Couplers 10-

43

ZZerks, Grease 10-65

10-IV FAX: (219)-696-6413 • WEBSITE: http://www.mpi-online.com


MPT II Multi-Purpose Rubber Air Hose

MPT II is a premium high quality, economical, multi-purpose hose that is oil resistant, excellent for air and water service and many chemicals. Withstands severe abuse, abrasion, and automotive chemicals found in most shops today. This hose may be used for air, grease, oil, gasoline, and low pressure hydraulic service. MPT II hose exceeds RMA Class A - high oil resistance requirements. Reinforcement: Multiple textile spirals. Temperature range: -20°F to +212°F. Max. working pressure: 300 PSI (4:1 safety factor). Material: seamless nitrile tube with one textile braid, smooth neoprene cover.

AIR HOSe ASSeMBLIeS Brass male pipe thread fittings.

Part no. Size Fitting Pkg4787-1 1/4 I.D. x 25' 1/4 NPT 14787-2 1/4 I.D. x 50' 1/4 NPT 14788-1 3/8 I.D. x 25' 1/4 NPT 14788-2 3/8 I.D. x 50' 1/4 NPT 14788-3 3/8 I.D. x 100' 1/4 NPT 14789-2 1/2 I.D. x 50' 3/8 NPT 1

BULK HOSe (UnCOUPLed)Cut-to-order lengths not returnable. Full packages shipped on reels.

Part no. I.d. O.d. Pkg4787 1/4 .550 500 ft4788 3/8 .688 500 ft4789 1/2 .875 500 ft

In addition to air, this hose may also be used for transfer of water and water soluble chemicals. Temperature range: -15°F to 150°F. Max. working pressure: 200 PSI @70°F, 180 PSI @122°F. Material: seamless PVC tube and cover, with one textile braid and rubber cover.

AIR HOSe ASSeMBLIeS Brass male pipe thread fittings.

Part no. Size Fitting Pkg4730-1 1/4 I.D. x 25 ft 1/4 NPT 14730-2 1/4 I.D. x 50 ft 1/4 NPT 14731-1 3/8 I.D. x 25 ft 1/4 NPT 14731-2 3/8 I.D. x 50 ft 1/4 NPT 14732-2 1/2 I.D. x 50 ft 3/8 NPT 1

BULK HOSe (UnCOUPLed) Hoses that are cut-to-order not returnable. UPS-able.

Part no. I.d. O.d. Pkg4730 1/4 .500 500 ft4731 3/8 .625 500 ft4732 1/2 .813 500 ft

*Working pressure decreases as temperature increases.

Hose Bend Protectors

Thermoplastic strain reliever supports air, hydraulic and water hoses at the hose end connection, protecting the assembly from damage. Easy to install.

Part For Hose Pkgno. O.d. Qty27-760 .530", .550" 127-761 .625" 127-762 .688" 127-763 .835", .875" 1

Poly-Air PVC Air Hose

Polyurethane Self-Store Hose

Self-retracting: automatically recoils. Durable and light-weight - 25% lighter than rubber, helps reduce worker fatigue. Service temperature range: -40° to 175°F. Max. working pressure†: 125 psi @ 70°F. Working length is 80% of nominal length shown. Each hose includes 4" pigtail and a 20" whip end. Permanent crimped male swivel pipe fittings both ends.

Part Working Swivelno. Hose Size Length Pipe Pkg4823 1/4 I.D. x 50' 40' 1/4 14825 3/8 I.D. x 50' 40' 1/4 1

†Warning: Working pressure decreases as temperature increases.

nylon Coil Air Hose

Air hose recoils to a fraction of its extended length to return pneumatic tool to safe location. 1/4" NPT

male swivels both ends. Part no. Hose Size Pkg4831 1/4 I.D. x 25' 14832 1/4 I.D. x 50' 1


MXX SERIESSeamless oil resistant tube. One high tensile wire braid. Oil and weather resistant cover. MSHA approved. Used for medium high pressure hydraulic lines on mobile equipment, machine tools, farm implements, snow plows and saw mills. No skiving required for fitting assembly. Temperature range: -40°F to +212°F. SAE 100R1 Type AT Thin Cover.

Min.Part Hose Hose Working Burst Pkgno. I.d. O.d. PSI PSI Qty4705 1/4 (-4) .53 2,750 11,000 50'4706 3/8 (-6) .69 2,250 9,000 50'4707 1/2 (-8) .81 2,000 8,000 50'4708 3/4 (-12) 1.09 1,250 5,000 25'4709 1" (-16) 1.41 1,000 4,000 25'

BXX SERIESSeamless oil resistant tube two high tensile wire braids. Oil and weather resistant cover. MSHA approved.Used for high pressure hydraulic lines on off-road construction, equipment, machine tools, farm equipment. No skiving required for fitting assembly. Temperature range: -40°F to +212°F. SAE 100R2,

Part Hose Hose Working Burst Min.no. I.d. O.d. PSI PSI Qty4741 1/4 (-4) .59 5,000 20,000 50'4742 3/8 (-6) .75 4,000 16,000 50'4743 1/2 (-8) .87 3,500 14,000 50'4749 5/8 (-10) .95 2,750 11,000 25'4744 3/4 (-12) 1.17 2,250 9,000 25'4745 1" (-16) 1.50 2,000 8,000 25'

Reusable fittings for this hose are available on request.

SAe 100R4 HOSeSeamless oil resistant synthetic rubber tube. Rein-force with one circular woven layer with interwoven helix wire. Oil and weather resistant synthetic rubber cover - MSHA approved. Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg.Temperature range: -40°F to +212°F. SAE/USCG Marine Listed.

Min.Part Hose Hose Working Burst Pkgno. I.d. O.d. Press. Press. QtyD-12C 3/4 1.25 300 psi 1200 psi 25'D-16C 1" 1.50 250 psi 1000 psi 25'D-20C 1-1/4 1.77 200 psi 800 psi 25'D-24C 1-1/2 2.08 150 psi 600 psi 25'D-32C 2" 2.50 100 psi 400 psi 25'D-40C 2-1/2 3.13 62 psi 250 psi 25'D-48C 3" 3.63 56 psi 225 psi 25'

Low Pressure Hose

nO CLAMPS ReQUIRed!Our most versatile low pressure hose. No clamps re-quired when used with push-on hose couplings.Used for low pressure transmission of air, oil, gasoline, water, coolants, etc. Make quick and easy hose changes in those hard-to-reach areas. Rugged, flame and oil resistant. Lightweight - only 11 lbs/cft. Flexible - easily recoiled after use. Service Temperature Range: -40°F to +212°F. Max. working pressure: 300 PSI. Minimum Burst Pressure: 1200 PSI. Material: Seamless nitrile tube, 1 textile braid†, oil and weather resistant rubber cover. Also available in bulk on reels. Min.

Part Hose Hose Working Burst Pkgno. I.d. O.d. PSI PSI Qty4700 1/4 .50 300 1200 50'4701 3/8 .62 300 1200 50'4702 1/2 .75 300 1200 50'4703 5/8 .91 300 1200 50'4704 3/4 1.03 300 1200 50'

† Braid is laid over tube at a special angle which causes hose to tighten around coupling as pressure is applied.

Push-On Low Pressure Hose

SAe 100R1 ATMedium Pressure

Hydraulic Hose Mxx

SAe 100R2 ATHigh Pressure Hydraulic

Hose Bxx


PARKER 301 SERIESSeamless oil resistant tube two high tensile wire braids. Oil and weather resistant cover. MSHA approved.Hydraulic fluids, oil, grease, lubricants, crude and fuel oils, air*, and water. Used for high pressure hydraulic lines on off-road construction, equipment, machine tools, farm equipment. No skiving required for fitting assembly. Temperature range: -40°F to +250°F. SAE 100R2, Type AT Thin Cover.

Min.Part Hose Hose Working Burst Pkgno. I.d. O.d. PSI PSI Qty8241 1/4 (-4) .59 5,000 20,000 50ft8242 3/8 (-6) .75 4,000 16,000 50ft8243 1/2 (-8) .87 3,500 14,000 50ft8244 3/4 (-12) 1.17 2,250 9,000 50ft8245 1" (-16) 1.50 2,000 8,000 50ft8246 1-1/4" (-20) 1.89 1,625 4,500 25ft

Parker SAe 100R2 ATHigh Pressure Hydraulic Hose

Pressure Washer Assemblies

Working pressure: 3000 PSI. Assemblies have 3/8" male NPT hose ends (one swivel end) and thermoplastic bend protectors. Cover is black.

Part Pkgno. Size Qty4786-2 3/8" ID x 50 ft 14786-4 3/8" ID x 100 ft 1

More sizes available upon special request

Heater and Fuel Line Hose

FUeL LIne HOSe

Nitrile tube resistant to deterioration effects or gasoline. diesel, leaded, unleaded, ethanol, and methanol based fuels. Excellent where petroleum vapors and blow by gases are recirculated through intake manifold. Hypalon cover provides maximum heat resistance up to 257° F and meets O.E.M. specifications. Meets or exceeds SAE J30R6, SAE 130R7, GM 6165M specifications.

Part no. Hose Size Pkg25048 3/16" I.D. x 25' 1 RL4775 1/4" I.D. x 25' 1 RL4776 5/16" I.D. x 25' 1 RL4777 3/8" I.D. x 25' 1 RL

Red PReMIUM THeRMAL Hd HeATeR HOSe

Operating temperature: -40 TO 257°F. 4 spirial polyester blue insulating layer.

Part Pkgno. Hose Size Qty31120 5/8 I.D. x 50' 1 RL30718 3/4 I.D. x 50' 1 RL30722 1" I.D. x 50' 1 RL

Red STAndARd HeATeR HOSeOperating temperature: -40 TO 212°F.

Part Pkgno. Hose Size Qty4768 1/2" I.D. x 50' 1 RL4769 5/8" I.D. x 50' 1 RL4770 3/4" I.D. x 50' 1 RL

SILICOne HeATeR HOSeBuilt for lasting performance at -65° F to 400°F operat-ing temperatures. Resistant to ozone, chemicals and lubricants. Exceeds SAE J20E.3 and TMC performance requirements. Red silicone tube and blue cover.Note: Always use "Lined Hose Clamps" with Silicone Heater Hose. Warning: Do not use serrated, slotted, or wire type clamps with this hose.

Part Burst Pkgno. Hose Size Pressure Qty4750 1/2" I.D. x 25' 310 psi 1 RL4751 5/8" I.D. x 25' 300 psi 1 RL4752 3/4" I.D. x 25' 300 psi 1 RL


Air Brake Tubing & Hose

SAE J844 Type B

SAE J844 Type A

nyLOn AIR BRAKe TUBInG

SAe J844 Type A - non Reinforced Single wall extruded nylon. Sizes 1/8" and 1/4" OD. SAe J844 Type B Reinforced Extruded Nylon inner tube, one layer of open-ply nylon fiber reinforcement and nylon outer cover. Sizes 3/8", 1/2", 5/8", 3/4" OD.Highly resistant to road salt, gasoline & oil, chemicals, cuts and abrasions. Will not fatigue or become brittle.FITTINGS: Use of NTA fittings is recommended but can be used with standard compression fittings (with insert support). Temperature range: -40°F to 200°F Not intended for frame to axle or tractor to trailer connections. Maximum working pressure: 150 PSI

Min.Part Tube Min. Burst Pkgno. O.d. Type Pressure Wall Qty4761 1/4 A 1200 psi .040" 100'4762 3/8 B 1400 psi .062" 100'4763 1/2 B 950 psi .062" 50'RUBBeR AIR BRAKe HOSe TyPe B

For use on truck and bus compressed air brake systems. Heavy duty neoprene cover resists deterioration from oil, grease and ozone. Smooth S.B.R. inner tube. Can be used with standard air brake replaceable couplings. Manufactured to commonwealth of Pennsylvania speci-fications and meets S.A.E. J1402 Type B specifications. Also available in 250 ft rolls.

Min.Part Hose Hose Burst Pkgno. I.d. O.d. Pressure Qty4766 3/8 3/4 1000 psi 50'

SAe 100R5 MedIUM PReSSUReAIR BRAKe & HydRAULIC HOSe

Seamless oil resistant tube. One wire braid and one textile braid reinforcement. Impregnated textile braided cover. Oil and mildew resistant. Applications: Used for truck air brakes, medium high pressure hydraulic lines on material handling equipment, off-road equipment, machine tools and other air, water, oil or gasoline ser-vice where cover resistance to abrasion is not required. No skiving required for fitting assembly. Temperature range: -40°F to 212°F. SAE 100R5 J1402C, Type AII , D.O.T. FMVSS-106. Pkg: 25 ft.

Part Hose Hose Working Burstno. I.d. O.d. PSI PSI4710 3/16 (-4) .52 3,000 12,0004711 1/4 (-5) .58 3,000 12,0004712 5/16 (-6) .67 2,250 9,0004714 1/2 (-10) .92 1,750 7,0004715 5/8 (-12) 1.08 1,500 6,000

WIndSHIeLd WASHeR VACUUM TUBInG

Meets SAE J200 BA710 specifications.

Part Hose Use Barb Pkgno. Size Fitting Qty4778 7/64" I.D. x 50' 1/8" 1 RL4779 5/32" I.D. x 50' 3/16" 1 RL4780 7/32" I.D. x 50' 1/4" 1 RL4782 9/32" I.D. x 50' 5/16" 1 RL


COPPeR TUBInGSoft, annealed seamless copper. 50 feet per roll.

Part Size Wall Pressure Pkgno. O.d. Gauge Working Burst Qty2701 3/16 .030 1990 8000 1 RL2702 1/4 .030 1450 5000 1 RL2703 5/16 .032 1230 4000 1 RL2704 3/8 .032 1010 3000 1 RL2705 1/2 .032 740 2000 1 RLHeavy duty annealed copper tubing available on special request

Tubing

CLeAR VInyL TUBInGNonreinforced, clear tubing for visible fluid flow Soft for easy handling and bending.• Nontoxic food and beverage grade. FDA & USDA accepted, NSF certified Use with Multi-Barb or Compression Fittings (with insert for support) Min.Part Working Pkgno. O.d. I.d. PSI @70°F Qty2736 1/4 1/8 65 100'2738 5/16 3/16 55 100'2740 3/8 1/4 55 100'2742 1/2 3/8 45 100'2744 5/8 1/2 30 100'2746 3/4 1/2 45 100'2749 7/8 5/8 40 50'2751 1" 3/4 35 50'

POLyeTHyLene TUBInGChemically resistant, flexible and lightweight. Designed for FDA applications. Low density. Natural off-white in color. Operating temperature: -50°F to +125°F. Use with poly-tite and brass compression fittings (with insert for support). 100 feet per roll

Part Pressure Pkg O.d. I.d. Working Burst Qty2715 1/4 11/64" 135 625 1 RL 2717 5/16 3/16" 135 800 1 RL 2719 3/8 1/4" 120 672 1 RL 2721 1/2 3/8" 90 425 1 RL 2723 5/8 1/2" 70 325 1 RL

TUBInG CUTTeR

Razor sharp blade cuts plastic and vinyl tubing and non-wire reinforced hose up to 9/16" OD. Part no. 23-317

Length is 9¾" for extra leverage. Razor sharp blade cuts plastic and vinyl tubing and non-wire reinforced

hose up to 1-1/8" OD. All metal construction. Comfortable PVC coated handles. Made in Canada. Part no. 10-393

Replacement Blades for above: Part No. 10-394

deLUxe HOSe CUTTeR


enGIneeRed FOR TOUGH InSTALLATIOnS

• ROUNDED EDGES TO PROTECT THE HOSE

• EFFICIENT 3-PIECE CONSTRUCTION

• NO SPOT WELDS TO CORRODE

• EASILY INSTALLED WITH SCREWDRIVER, NUT DRIVER OR SOCKET WRENCH

• SCREWS FEATURE DEEP SLOTS FOR QUICK INSTALLATION

• MEETS OR EXCEEDS SAE TORQUE SPECIFICATIONS

FOUR STyLeS FOR eVeRy APPLICATIOn!

Hose Clamps

PARTIAL STAInLeSSMost common clamp for automotive and indus-trial applications. Combines economy with durability. 1/2" wide stainless steel band. Plated steel 5/16" slotted hex head screw and housing.

ALL STAInLeSS STeeLAll stainless steel for good corrosion resistance and extra strength. 1/2" wide, 300 series stainless steel band and housing. 400 series stainless steel (mag-netic) 5/16" slotted hex head screw.

LOW-MAG 300 SeRIeS STAInLeSS STeeL High quality stainless steel with low magnetic perme-ability and high corrosion resistance. Well suited for marine applications, swim-ming pools, or anywhere humidity is a problem. 1/2" wide, 300 series stainless steel band, 300 series stainless steel housing and5/16" slotted hex head screw.

LIned HOSe CLAMPSRecommended for use with soft hoses like silicone heater hose. Provides maximum protection for all soft hoses while ensuring a strong, positive seal. 1/2" wide band, liner and hous-ing are made from stainless steel. Plated steel 5/16" slotted hex head screw. Inner liner covers band serrations which pre-vents hose damage.

HOSe CLAMP RACKHeavy wire rack holds 10 sizes from 4 to 36. Part no. 2398

"PARTIAL STAInLeSS"HOSe CLAMP ASSORTMenTSizes 4 and 6 miniature, 8, 10, 12, 16, 20, 28, 32, and 36 standard clamps in a metal hose clamp rack. Part no. 2396

"ALL STAInLeSS"HOSe CLAMP ASSORTMenTSizes 4 and 6 miniature, 8, 10, 12, 16, 20, 28, 32, and 36 "all stainless steel" clamps in a metal hose clamp rack. Part no. 2397

Hose Clamp Assortments

For order information see next page

BIG HOSe CLAMP RACKHeavy wire rack holds 5 sizes from 40 to 72. Part no. 2395

"PARTIAL STAInLeSS"BIG HOSe CLAMP ASSORTMenTSizes 40, 48, 52, 56 and 72 standard clamps in a metal hose clamp rack. Part no. 2394


SAe PARTIAL ALL LOW-MAG PKG SIZe** STAInLeSS STAInLeSS STAInLeSS QTy 5/16" BAnd WIdTH 4 (Mini) 1577 2500 - 10 6 2401 2501 - 10 8 2402 2502 - 1010 2403 - - 10 12 2404 - - 10 LIned HOSe PKG1/2" BAnd WIdTH CLAMPS QTy 6 1578 2405 2505 10 2530 10 8 1579 2406 2506 10 2531 1010 1580 2407 2507 10 2532 1012 1581 2408 2508 10 2533 1016 1582 2409 2509 10 2534 1020 1583 2410 2510 10 2535 1024 1584 2411 2511 10 2536 1028 1585 2412 2512 10 2537 1032 1586 2413 2513 10 2538 1036 1587 2414 2514 10 2539 1040 1588 2415 2515 10 2540 1044 1589 2416 2516 10 2541 1048 1590 2417 2517 10 2542 1052 1591 2418 2518 10 2543 1056 1592 2419 2519 10 2544 1060 1593 - - 10 2545 1064 1594 2420 2520 10 2546 1072 1595 2423 2523 10 2547 1080 1596 2424 2524 1088 1597 2425 2525 1096 1598 2426 2526 10104 1599 2427 2527 10116 - 2428 2528 10152 - 2422 - 10188 - 2421 - 10

Hose Clamps

HOSe CLAMP dIMenSIOnS

STd. HOSe HOSe I.d. LIned HOSeSAe CLAMP dIAMeTeR RAnGe* CLAMP dIAMeTeRSIZe** MIn. MAx. MIn. MAx. MIn. MAx.4 7/32 5/8 3/16 5/16 - -6 3/8 7/8 1/4 3/8 5/8 3/48 7/16 1" 5/16 1/2 5/8 13/1610 9/16 1-1/16 3/8 5/8 3/4 15/1612 9/16 1-1/4 5/8 3/4 3/4 1-1/816 11/16 1-1/2 3/4 1" 13/16 1-3/820 3/4 1-3/4 1" 1-1/4 1-1/8 1-5/824 1-1/16 2" 1-1/4 1-1/2 1-3/16 1-15/1628 1-5/16 2-1/4 1-1/4 1-3/4 1-5/16 2-1/432 1-9/16 2-1/2 1-1/2 2" 1-9/16 2-1/236 1-13/16 2-3/4 1-3/4 2-1/4 1-13/16 2-3/440 2-1/16 3" 2" 2-1/2 2-1/16 3"44 2-5/16 3-1/4 2-1/4 2-3/4 2-5/16 3-1/448 2-9/16 3-1/2 2-1/2 3 2-9/16 3-1/252 2-13/16 3-3/4 3" 3-1/4 2-13/16 3-3/456 3-1/16 4" 3-1/4 3-1/2 3-1/16 4"60 3-5/16 4-1/4 3-1/2 3-3/4 3-5/16 4-1/464 3-9/16 4-1/2 3-1/2 4 3-9/16 4-1/272 4-1/16 5" 3-3/4 4-1/2 4-1/16 5"80 4-5/8 5-1/2 4" 5 - -88 4-3/32 6" 4" 5-1/2 - -96 4-1/2 6-1/2 5" 6" - -104 5" 7" 5" 6-1/2 - -116 5-3/4 7-3/4 - - - -

* Hose I.D. Range for all clamps excluding "Lined" Hose Clamps through size #24. Hose size is inside diameter assuming a 3/16" hose wall thickness. ** SAE sizes correspond to hose number. Example: A #8 hose clamp will fit #8, 1/2" I.D. hose (8/16ths = 1/2")


FITTInG MeASUReMenTTUBe SIZeS

All tube sizes referred to in this catalog pertain to the outside diameter of the tubing with exceptions noted where appropriate. The tube size of the fitting can be determined by one of the following methods, whichever is appropriate:

1. If the nut or sleeve (ferrule) can be measured, determine what part of the fitting the tubing is inserted by examining the assembly illustrations on the following pages and measure the unthreaded inside diameter with a caliper or ruler. Diameter "A" would be the tube size.

2. If only the body of the fitting is available (on compression style fittings) then with your caliper or ruler, measure the inside diameter of the tube insertion point. Diameter "B" would be the tube size. (This method may not be suitable for compression fittings using a rubber ring as the sealing sleeve and some plastic one-piece nut and sleeve combinations.)

3. Referring to the tube size charts below, measure the thread diameter with a caliper and determine the threads per inch either with a thread pitch gauge or by counting (from crest to crest) the number of threads in one quarter inch and multiply by four. For example, 4 full threads in one quarter inch, would equal sixteen threads per inch. Finding the proper style in the chart, choose the tube thread diameter and thread pitch to determine the tube size.

A A A A

TUBe end THReAd SIZeSO.D. TUBE SIZE 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4 7/8 1" 1-1/4 1-1/2 2"

DASH NUMBER -2 -3 -4 -5 -6 -7 -8 -10 -12 -14 -16 -20 -24 -32

STD. COMPRESSION 5/16-24 3/8-24 7/16-24 1/2-24 9/16-24 5/8-24 11/16-20 13/16-18 1-18 1-1/8-18 1-1/4-18

AIR BRAKE (Cooper) 7/16-24 17/32-24 11/16-20 13/16-18 1-18

NTA AIR BRAKE 7/16-24 17/32-24 11/16-20 13/16-18 1-18

POLY-TITE 5/16-24 3/8-24 3/8-24 7/16-24 1/2-24 11/16-20

DOUBLE COMPRESSION 5/16-24 3/8-24 7/16-24 1/2-20 9/16-20 5/8-18

SAE 45 FLARE 5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 11/16-16 3/4-16 7/8-14 1-1/16-14

JIC 37 FLARE 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-3/16-12 1-5/16-12 1-5/8-12 1-7/8-12 2-1/2-12

INVERTED FLARE 5/16-28 3/8-24 7/16-24 1/2-20 5/8-18 11/16-18 3/4-16 7/8-18 1-1/16-16 1-3/16-16 1-5/16-16

O-RING BOSS 5/16-24 3/8-24 7/16-20 1/2-20 9/16-18 3/4-16 7/8-14 1-1/16-12 1-3/16-12 1-5/16-12 1-5/8-12 1-7/8-12 2-1/2-12

4. The illustrations below show actual tubing outside diameters. To determine tube size compare a cross-section of the tubing, the inside diameter of the sleeve (ferrule), or place the unthreaded end of the nut over the closest size.

1/8 5/32 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4


Standard Compression Fittings

This type of fitting was designed as an easy and economical method of connecting tubing with the assur-ance of a tight joint that can be repeatedly disconnected and connected without leakage. By using Compres-sion Fittings, flaring and soldering are eliminated. Compression Fitting connections are made by slipping the nut and sleeve over the tubing and inserting the tubing into the fitting. The nut is then tightened onto the fitting and the action of turning the nut compresses the sleeve and makes the sleeve a component part of the tubing. The angle of the compressed sleeve makes a leakproof joint between the tubing and the fitting. Compression fitting are sold complete with nuts and sleeves.

double Compression Fittings

Called Double Compression because of the "double" duty of the threaded sleeve, both nut and compres-sion sleeve, these fittings are used primarily on low and medium pressure work. The two-piece assembly of a compression type fitting has two main advantages. The nut is tightened inside of the fitting making a compact assembly and fewer component parts make assembly simplified. Double Compression Fittings are sold less the nuts.

Air Brake Compression Fittings (for Copper Tubing) The same sealing principle as a Standard Compression Fitting, but the addition of a long nut and spherical sleeve provide the vibration resistance necessary for heavy duty truck and tractor equipment. Meets all D.O.T and SAE specifications.. Air Brake Fittings can be differentiated from standard compression fittings by the "AIR BRAKE", "AB" or "D.O.T." letters on the wrench flats. They come complete with nut and sleeve. The addition of the proper tube insert easily and legally converts the fitting for use with nylon air brake tubing.

nTA Air Brake Fittings (for nylon Tubing)

Utilizing the compression sleeve principle, NTA (nylon Tube, Air brake) Fittings provide a D.O.T. approved connection when used with NTA tubing. The body of the fitting contains a staked-in stainless tube insert to prevent tube restriction when the nut is tightened. While these fittings may be used with any plastic tubing, care should be taken that the I.D. of the tubing matches the insert's outside diameter. Use of standard air brake nylon tubing, which matches perfectly, is recommended and makes the only D.O.T approved connec-tion. Sold complete with nuts, sleeves and inserts.

Flare Fittings (45° SAe)

Flared tube Fitting connections are made by slipping the nut over the tubing and flaring the end of the tub-ing by use of a flaring tool. When used with rubber hose connections, the swivel nut of the hose end provides a simple and reliable connection for air, fuel and hydraulic lines. The nut is pulled up with a wrench, and a tight joint is obtained by sandwiching the flared tubing between the mating flare surfaces. The connection can be disconnected and connected frequently. These fittings can be used on low, medium and high pressure lines under the most adverse conditions. All Flare Fittings are sold less the nuts.

FITTInG MeASUReMenTTUBe SIZeS


FITTInG MeASUReMenT

Inverted Flare Fittings

This type of fitting is similar to the Flare Fitting except that the flare seat is inside of the body. The nut is tightened inside of the fitting making the assembly very compact. These fittings can be used on low, medium, and high pressure work and are sold less the nuts. Most commonly used in the automotive industry where it is popular for fuel and hydraulic brake line assemblies.

Poly-Tite Fittings

A compact brass compression type fitting designed to speed and simplify plastic tubing installations. The brass nut and plastic sleeve (brass sleeve supplied on 1/8 and 3/16 sizes) are pre-assembled. The tube sup-port is built into the fitting body on tube sizes larger than 3/16 so there is no fumbling around looking for lost components. Use with polyethylene, polypropylene and nylon tubing for instrumentation, air, water, lubrica-tion, fuel and coolant lines. (Be sure the built-in insert's O.D. matches the tubing's I.D.) A complete seal is obtained by hand tightening the nut though most mechanics feel a wrench tight fit is more realistic.

Push-In Fittings

The simplicity of the Push-in Fitting is its primary advantage. Simply cut the tubing square and push the tub-ing into the fitting. The o-ring seal will hold pressures up to that of the tubing. A push on the collar releases the grip and the fitting never has to be unscrewed for new tubing to be inserted. A supply of unions and tubing in a truck cab will make emergency tubing repairs quick and simple.


FITTInG MeASUReMenT

Male Pipe Thread Sizes

SAe (JIC) 37° Flare nose Cone Sizes

37° and 45° Flarenose Angles

45°

SAe (JIC) 45° Flare nose Cone Sizes

Pipe Thread Sealing Tips 1. Always use some type of sealant (tape or paste) and apply sealant to male thread only. If using a hydraulic seal-ant, allow sufficient curing time before system is pressurized. 2. When using tape sealant, wrap the threads in a clockwise motion starting at the first thread and, as layers are applied, work towards the imperfect (vanishing) thread. If the system that the connection being made to cannot tolerate foreign matter (i.e. air systems), leave the first thread exposed and apply the tape sealant as outlined above. 3. When using teflon paste sealant, apply to threads with a brush, using the brush to work the sealant into the threads. Apply enough sealant to fill in all the threads all the way around. 4. For sizes 2" and below, tape or teflon paste performs satisfactory. When using thread tape, four wraps (covering all necessary threads) is usually sufficient. 5. For sizes 2-1/2" and above, teflon paste is recommended. If thread tape is used, eight wraps (covering all necessary threads) is usually sufficient. Apply more wraps if necessary.6. For stubborn to seal threads, apply a normal coating of teflon paste followed by a normal layer of thread tape. 7. Over-tightening threads can be just as detrimental as insufficient tightening. For sizes 2" and below, hand tighten the components and, with a wrench, tighten 3 full turns. For sizes 2 1/2" and above, hand tighten the components and, with a wrench, tighten 2 full turns.


TUBe InSeRTS (FOR PLASTIC TUBING)

Used inside plastic tubing to keep it from collapsing. Also see "Nylon Truck Airbrake

Inserts". Part Tube Insert Pkgno. Size O.d. Qty27-842 1/8 .080 2527-843 1/8 .074 2527-844 3/16 .095 2527-845 3/16 .110 2527-846 3/16 .135 2527-847 1/4 .125 2527-510 1/4 .163 2527-511 5/16 .187 2527-848 5/16 .215 2527-512 3/8 .245 2527-513 1/2 .370 1027-514 5/8 .483 10

Parker 63PT, Weatherhead 74

Standard Brass Compression FittingCOMPReSSIOn SLeeVe

(Ferrules)

Part Tube Pkgno. Size Qty27-001 1/8 10027-002 3/16 10027-003 1/4 10027-004 5/16 10027-005 3/8 10027-006 7/16 10027-007 1/2 5027-008 5/8 2527-009 3/4 25Parker 60C, Weatherhead 60, edelmann 160, Imperial eastman 60-F

COMPReSSIOn nUT

Part Tube Pkgno. Size Qty27-010 1/8 2527-011 3/16 2527-012 1/4 2527-013 5/16 2527-014 3/8 2527-015 1/2 1027-016 5/8 1027-017 3/4 5Parker 60C, Weatherhead 60, edelmann 160, Imperial eastman 60-F

deLRIn SLeeVeS(PLASTIC)

Delrin Sleeves replace brass sleeves to convert Standard Compression Fittings for use with plastic tubing. A brass Tube Insert (below)

completes the assembly.

PART Tube Pkgno. Size Qty27-515 1/4 10027-516 5/16 10027-517 3/8 10027-518 1/2 100

COMPReSSIOn LOnG nUT

Used for extra support where excessive vibration may be encountered. NOT FOR AIR

BRAKE USE. Part Tube Pkgno. Size Qty27-018 3/16 2527-019 1/4 2527-020 5/16 2527-021 3/8 2527-022 1/2 1027-023 5/8 1027-024 3/4 5Parker 61CL, Weatherhead 1611,Imperial eastman 161-F

COMPReSSIOn UnIOnTube to Tube


COMPReSSIOn RedUCInG UnIOn

Tube to Tube

Part Tube Tube Pkgno. Size Size Qty27-849 1/4 1/8 1027-850 1/4 3/16 1027-851 5/16 1/4 1027-852 3/8 1/4 1027-853 3/8 5/16 1027-854 1/2 3/8 50Parker 62C

COMPReSSIOn UnIOn TeeTube to Tube to Tube


COMPReSSIOn BRAnCH Tee

Tube to Male Pipe

Part Tube Pipe Pkgno.. Size Size Qty27-140 3/16 1/8 527-141 1/4 1/8 527-142 1/4 1/4 527-143 5/16 1/8 527-144 5/16 1/4 527-145 3/8 1/8 527-146 3/8 1/4 527-147 3/8 3/8 527-148 1/2 3/8 5Parker 172C, Weatherhead 72, edelmann 172, Imperial eastman 72-F

COMPReSSIOn BULKHeAd UnIOn

Tube to Tube

PART Tube Pkgno. Size Qty27-033 1/4 527-034 3/8 527-035 1/2 5Parker 62CBH, Weatherhead 74


Standard Brass Compression FittingsCOMPReSSIOn MALe RUn Tee

Tube to Male Pipe

Part Tube Pipe Pkgno.. Size Size Qty27-626 3/16 1/8 527-138 1/4 1/8 527-139 1/4 1/4 527-627 5/16 1/8 527-628 5/16 1/4 527-629 3/8 1/4 527-630 3/8 3/8 527-631 1/2 3/8 527-632 1/2 1/2 5Parker 171C, Weatherhead 71, edelmann 171, Imperial eastman 71-F

COMPReSSIOn UnIOn eLBOW

Tube to Tube

Part Tube Pkgno. Size Qty27-044 1/8 527-045 3/16 527-046 1/4 527-048 3/8 527-049 1/2 527-050 5/8 527-051 3/4 5Parker 165C, Weatherhead 65, edelmann 165, Imperial eastman 65-F

COMPReSSIOn45° MALe eLBOW

Tube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty27-646 1/4 1/8 1027-122 5/16 1/4 1027-647 3/8 1/4 1027-648 1/2 3/8 527-123 5/8 1/2 5Parker 179C, Imperial eastman 74-F

COMPReSSIOn90° FeMALe eLBOW

Tube to Female Pipe

Part Tube Pipe Pkgno. Size Size Qty27-124 1/8 1/8 527-125 3/16 1/8 527-126 1/4 1/8 527-127 1/4 1/4 527-128 5/16 1/8 527-129 5/16 1/4 527-130 3/8 1/4 527-131 3/8 3/8 527-132 3/8 1/2 527-133 1/2 1/4 527-134 1/2 3/8 527-135 1/2 1/2 527-136 5/8 1/2 527-137 5/8 3/4 5Parker170C, Weatherhead 70, edelmann 170, Imperial

eastman 70-F

COMPReSSIOn90° MALe eLBOW

Tube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty27-099 1/8 1/8 1027-100 3/16 1/8 1027-101 3/16 1/4 1027-102 1/4 1/8 1027-103 1/4 1/4 1027-104 1/4 3/8 527-105 1/4 1/2 527-106 5/16 1/8 1027-107 5/16 1/4 1027-108 5/16 3/8 527-109 3/8 1/8 527-110 3/8 1/4 1027-111 3/8 3/8 1027-112 3/8 1/2 527-113 3/8 3/4 527-114 1/2 1/4 527-115 1/2 3/8 527-116 1/2 1/2 527-118 5/8 1/2 527-119 5/8 3/4 527-120 3/4 1/2 5 27-121 3/4 3/4 5Parker 169C, Weatherhead 69, edelmann 169, Imperial eastman 69-F

COMPReSSIOn MALe COnneCTOR

Tube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty27-075 1/8 1/8 1027-076 3/16 1/8 1027-077 3/16 1/4 1027-078 1/4 1/8 1027-079 1/4 1/4 1027-080 1/4 3/8 1027-081 1/4 1/2 1027-082 5/16 1/8 1027-083 5/16 1/4 1027-084 5/16 3/8 1027-085 3/8 1/8 1027-086 3/8 1/4 1027-087 3/8 3/8 1027-088 3/8 1/2 1027-089 3/8 3/4 527-090 1/2 1/4 527-091 1/2 3/8 527-092 1/2 1/2 527-093 1/2 3/4 527-094 5/8 3/8 527-095 5/8 1/2 527-096 5/8 3/4 527-097 3/4 1/2 527-098 3/4 3/4 5Parker 68C, Weatherhead 68, edelmann 168, Imperial eastman 68-F

COMPReSSIOn FeMALe COnneCTOR

Tube to Female Pipe

Part Tube Pipe Pkgno. Size Size Qty27-052 1/8 1/8 1027-053 3/16 1/8 1027-054 3/16 1/4 1027-055 1/4 1/8 1027-056 1/4 1/4 1027-057 1/4 3/8 527-058 1/4 1/2 527-059 5/16 1/8 1027-060 5/16 1/4 1027-061 5/16 3/8 527-062 3/8 1/8 1027-063 3/8 1/4 1027-064 3/8 3/8 1027-065 3/8 1/2 1027-066 3/8 3/4 527-067 1/2 1/4 527-068 1/2 3/8 527-069 1/2 1/2 5Parker 66C, Weatherhead 66, edelmann 166, Imperial eastman 66-F


Brass Inverted Flare Fittings

InVeRTed LOnG STeeL nUT

PART Tube Pkgno. SIZe Qty27-390 3/16 2027-391 1/4 10Weatherhead 7896, edelmann B21L, Imperial east-man 41-WL

InVeRTed FeMALe COnneCTOR

Tube to Female PipePart Tube Pipe Pkgno. Size Size Qty27-662 3/16 1/8 1027-663 1/4 1/8 1027-664 5/16 1/8 1027-665 3/8 1/4 1027-666 1/2 3/8 5Parker 46IFHd, Weatherhead 252, edelmann 126/B-26, Imperial eastman 46-W

InVeRTed MALe COnneCTOR

Tube To Male PipePart Tube Pipe Pkgno. Size Size Qty27-661 1/8 1/8 1027-296 3/16 1/8 1027-297 1/4 1/8 1027-298 1/4 1/4 1027-299 5/16 1/8 1027-300 5/16 1/4 1027-301 3/8 1/8 1027-302 3/8 1/4 1027-303 3/8 3/8 527-304 1/2 1/4 527-305 1/2 3/8 527-306 1/2 1/2 5

Other sizes available up to 1" tubeParker 48IFHd, Weatherhead 202, edelmann 124/B-24, Imperial eastman 48-W

InVeRTed BRASS nUTS

Part Tube Pkgno. Size Qty27-278 1/8 2527-279 3/16 2527-280 1/4 2527-282 3/8 2527-283 1/2 10Parker 41IF, Weatherhead 100, edelmann 121/B-21

InVeRTed STeeL nUT

Part Tube Pkgno. Size Qty27-284 1/8 2527-285 3/16 2527-286 1/4 2527-287 5/16 2527-288 3/8 2527-289 1/2 10Parker 41IFS, Weatherhead 105, edelmann 123/B-23, Imperial eastman 42-W

InVeRTed STeeL PLUG

PART Tube Pkgno. Size Qty27-392 3/16 1027-393 1/4 1027-394 5/16 1027-395 3/8 10Weatherhead 131, edelmann 120/B-20, Imperial east-man 39-W

InVeRTed BRASS UnIOn

Tube to TubePart Tube Pkgno. Size Qty27-290 1/8 1027-291 3/16 1027-292 1/4 1027-293 5/16 1027-294 3/8 1027-295 1/2 5Parker 42IFHd, Weatherhead 302, edelmann 123/B23, Imperial eastman 42-WL

InVeRTed MALe eLBOW

Tube to Male PipePart Tube Pipe Pkgno. Size Size Qty27-307 1/8 1/8 1027-308 3/16 1/8 1027-309 1/4 1/8 1027-310 1/4 1/4 1027-311 5/16 1/8 1027-312 5/16 1/4 1027-313 3/8 1/8 1027-314 3/8 1/4 1027-315 3/8 3/8 527-316 1/2 3/8 5Parker 249IFHd, Weatherhead 402, edelmann 122/B-22, Imperial eastman 49-W

InVeRTed 45°

MALe eLBOWTube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty27-318 3/16 1/8 1027-319 1/4 1/8 1027-320 5/16 1/8 1027-321 5/16 1/4 1027-322 3/8 1/4 10Parker 259FHd, Weatherhead 352, edelmann 125/B-25, Imperial eastman 94-W

InVeRTed BRAnCH Tee

Tube to Tube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty27-855 3/16 1/8 1027-856 1/4 1/8 1027-857 5/16 1/8 1027-858 3/8 1/4 5Parker 245IFHd, Weatherhead 602

InVeRTed RUn Tee

Tube to Male Pipe to TubePart Tube Pipe Pkgno. Size Size Qty27-859 3/16 1/8 1027-860 1/4 1/8 1027-861 5/16 1/8 1027-862 3/8 1/4 5Parker 251IFHd, Weatherhead 752

InVeRTed UnIOn Tee Tube to Tube to Tube

PART Tube Pkgno. SIZe Qty27-863 3/16 1027-864 1/4 1027-865 5/16 1027-866 3/8 5Parker 244IFHd, Weatherhead 702

TOWed TRAILeRBRAKe TeeS FOR

HydRAULIC BRAKeSA - Female Inverted FlareB- Female Inverted FlareC- Male Inverted Flare

A

B

C

Part "A" "B" "C" Pkgnumber Fem. Fem. Male Qty27-867 1/4 1/4 1/4 527-868 3/16 1/4 3/16 527-869 3/16 3/16 3/16 527-870 1/4 3/16 1/4 527-881* 1/4 3/16 1/4 npt* 5

*Pipe threadAlso available in Metric

edelmann 127/B-27


Brass Inverted Flare Fittings

Part Female Male Male Pkgnumber Tube Tube Inv.Thd Qty27-871 3/16 1/4 7/16-24 1027-872 3/16 5/16 1/2-20 1027-8731 3/16 5/16 1/2-20 1027-874 3/16 - 9/16-18 1027-875 3/16 - 9/16-20 1027-876 1/4 3/16 3/8-24 1027-877 1/4 5/16 1/2-20 1027-8781 1/4 5/16 1/2-20 1027-8791 1/4 - 7/16-20 1027-880 1/4 - 9/16-18 1027-882 5/16 1/4 7/16-24 1027-883 5/16 5/16 1/2-20 1027-884 5/16 3/8 5/8-18 1027-8851 5/16 5/16 1/2-20 1027-886 3/8 5/16 1/2-20 1027-888 5/16(3/16)2 - 9/16-18 1027-889 9/16-18 5/16(3/16)2 - 101Seals on hex face25/16 (1/2-20) thread size with 3/16 inverted seat size

COnVeRSIOnInVeRTed FLARe

AdAPTeRSFemale Tube to Male Tube

Brass Air Brake Fittings For Copper Tubing

AIR BRAKe SLeeVe

Part Tube Pkgno. Size Qty27-198 1/4 10027-199 5/16 10027-200 3/8 10027-201 1/2 5027-202 5/8 2527-203 3/4 25Parker 60AB, Weatherhead 1360, edelmann 9060, Impe-rial eastman 460-F

AIR BRAKe nUT


AIR BRAKe UnIOnTube to Tube


AIR BRAKe UnIOn eLBOW

Tube to Tube

Part Tube Pkgno. Size Qty27-221 1/4 527-222 3/8 527-223 1/2 527-224 5/8 2Parker 265AB, Weatherhead 1362, edelmann 9056, Imperial eastman 465-F

AIR BRAKeBULKHeAd UnIOn

Tube to Tube

Part Tube Pkgno. Size Qty27-890 1/4 527-891 3/8 527-892 1/2 5Parker 62ABH

AIR BRAKe UnIOn Tee Tube to Tube to TubePart Tube Pkgno. Size Qty27-217 1/4 527-218 3/8 527-219 1/2 527-220 5/8 2Parker 264AB, Weatherhead 1364, edelmann 9064, Imperial eastman 464-F

AIR BRAKe BRAnCH Tee

Tube to Tube to Male PipePart Tube Pipe Pkgno. Size Size Qty27-261 3/8 1/8 527-262 3/8 1/4 527-667 1/2 3/8 527-668 5/8 1/2 227-669 3/4 1/2 2Parker 272AB, Weatherhead 1372, edelmann 9072, Imperial eastman 472-F

AIR BRAKe RUn Tee

Tube to Male Pipe to TubePart Tube Pipe Pkgno. Size Size Qty27-275 1/4 1/8 527-260 3/8 1/4 527-276 1/2 3/8 527-277 5/8 1/2 2Parker 271AB, Weatherhead 1382, edelmann 9071, Imperial eastman 471-F


Brass Air Brake Fittings For Copper Tubing

AIR BRAKeMALe COnneCTOR

Tube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty27-227 1/4 1/8 1027-228 1/4 1/4 1027-229 5/16 1/8 1027-230 5/16 1/4 1027-231 3/8 1/8 1027-232 3/8 1/4 1027-233 3/8 3/8 1027-234 3/8 1/2 1027-235 1/2 1/4 527-236 1/2 3/8 527-237 1/2 1/2 527-238 5/8 3/8 227-239 5/8 1/2 227-240 5/8 3/4 227-241 3/4 1/2 227-242 3/4 3/4 2Parker 68AB, Weatherhead 1368, edelmann 9068, Impe-rial eastman 468-F

AIR BRAKe 90° MALe eLBOW

Tube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty27-243 1/4 1/8 1027-244 1/4 1/4 1027-245 5/16 1/8 1027-246 5/16 1/4 1027-247 3/8 1/8 1027-248 3/8 1/4 1027-249 3/8 3/8 1027-250 3/8 1/2 527-251 1/2 1/4 527-252 1/2 3/8 527-253 1/2 1/2 527-254 5/8 3/8 227-255 5/8 1/2 227-257 3/4 1/2 227-258 3/4 3/4 2Parker 268AB, Weatherhead 1369, edelmann 9069, Imperial eastman 469-F

AIR BRAKe 90° MALe eLBOW

Tube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty27-263 1/4 1/8 1027-264 3/8 1/8 1027-265 3/8 1/4 1027-266 3/8 3/8 1027-268 1/2 3/8 527-269 1/2 1/2 527-270 5/8 1/2 2Parker 279AB, Imperial eastman 474-F

AIR BRAKeFeMALe COnneCTOR

Tube to Female Pipe

Part Tube Pipe Pkgno. Size Size Qty27-893 1/4 1/8 1027-894 1/4 1/4 1027-895 3/8 1/8 1027-896 3/8 1/4 1027-897 3/8 3/8 1027-898 1/2 1/4 527-899 1/2 3/8 527-900 1/2 1/2 5Parker 66AB, edelmann 906/B-1066, Imperial east-man 466-F

AIR BRAKe 90° FeMALe eLBOW

Tube to Female Pipe

Part Tube Pipe Pkgno. Size Size Qty27-271 3/8 1/4 527-259 3/8 3/8 527-272 1/2 3/8 527-273 1/2 1/2 527-274 5/8 1/2 2Parker 270AB, Weatherhead 1470, edelmann 9070, Imperial eastman 470-F

MALe COnneCTORTube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty5430 1/8 1/16 105431 1/8 1/8 1027-910 5/32 1/16 1027-911 5/32 1/8 10

90° MALe eLBOWTube to Male Pipe

27-912 1/8 1/16 55444 1/8 1/8 527-913 5/32 1/8 5

SPLIT SLeeVe BRASS FITTInGS

Used on Eaton-Fuller Transmission Shifters. For use with Nylon Air Brake Tubing. 5/32" size supplied with a built-in tube support.

SLeeVePart Tube Pkgno. Size Qty5406 1/8 5027-907 5/32 50

nUT5400 1/8 25

UnIOnTube to Tube

5414 1/8 527-909 5/32 5

nTA Brass Air Brake Fittings

For nylon Tubing


nTA Brass Air Brake Fittings For nylon Tubing

Parker 61nTA, Weatherhead 1461, Imperial eastman 461-FS

Parker 60nTA, Weatherhead 1460, Imperial eastman 4-460-FParker 66nTA, Weatherhead 1466, Imperial eastman 466-F

Parker 264nTA, Weatherhead 1464, Imperial eastman 4-464-F

Parker 63nTA, Weatherhead 1484, Imperial eastman 459-F


nTA SLeeVePart Tube Pkgno. Size Qty5407 1/4 505408 3/8 505409 1/2 255410 5/8 105411 3/4 10

nTA nUTPart Tube Pkgno Size Qty5401 1/4 255402 3/8 255403 1/2 105404 5/8 105405 3/4 5

nTA TUBe InSeRT

Part no. Part no. Tube Insert PkgBRASS S/S O.d. O.d. Qty27-510 27-901 1/4 .163 2527-512 27-902 3/8 .245 2527-513 27-903 1/2 .370 10 - 5415 5/8 .434 10 - 5416 3/4 .559 10

nTAMALe COnneCTOR

Tube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty5432 1/4 1/8 105433 1/4 1/4 105434 3/8 1/8 55435 3/8 1/4 55436 3/8 3/8 55437 3/8 1/2 35438 1/2 1/4 35439 1/2 3/8 35440 1/2 1/2 35441 5/8 1/2 25442 3/4 1/2 25443 3/4 3/4 2

nTA FeMALe COnneCTOR

Tube to Female Pipe

Part Tube Pipe Pkgno. Size Size Qty5422 1/4 1/8 55423 1/4 1/4 55424 3/8 1/4 55425 3/8 3/8 55426 1/2 3/8 55427 1/2 1/2 35428 5/8 1/2 25429 3/4 1/2 2

nTAUnIOn Tee Tube to Tube to Tube

Part Tube Pkgno. Size Qty5466 1/4 25467 3/8 25468 1/2 2


nTAUnIOn Tube to Tube

Part Tube Pkgno. Size Qty5417 1/4 55418 3/8 55419 1/2 55420 5/8 25421 3/4 2

nTAMALe BRAnCH Tee


Part Tube Pipe Pkgno. Size Size Qty5472 1/4 1/8 25473 3/8 1/4 25474 1/2 3/8 25475 1/2 1/2 2

nTA45° MALe eLBOW

Tube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty5460 1/4 1/8 55461 1/4 1/4 55462 3/8 1/4 55463 3/8 3/8 55464 1/2 3/8 35465 5/8 1/2 2

nTA90° FeMALe eLBOW

Tube to Female Pipe

Part Tube Pipe Pkgno. Size Size Qty5453 1/4 1/8 55454 1/4 1/4 55455 3/8 1/4 35456 3/8 3/8 35457 1/2 3/8 35458 1/2 1/2 35459 5/8 1/2 2

nTA90° MALe eLBOW

Tube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty5445 1/4 1/8 55446 1/4 1/4 55447 3/8 1/4 55448 3/8 3/8 55449 3/8 1/2 55450 1/2 3/8 35451 1/2 1/2 35452 5/8 1/2 2




Parker 270nTA, Weatherhead 1470

nTA BULKHeAd UnIOn

Tube to Tube

Part Tube Pkgno. Size Qty27-904 1/4 527-905 3/8 527-906 1/2 5Parker 62nBH, Weatherhead 1474,

nTA MALe RUn TeeTube to Male Pipe to Tube

Part Tube Pipe Pkgno. Size Size Qty5469 1/4 1/8 25470 3/8 1/4 25471 1/2 3/8 2Parker 271nTA, Weatherhead 1471, Imperial eastman 4-471-F


Brass Flare Fittings, SAe 45°

SHORT FLARe nUT

Part Tube Pkgno. Size Qty27-633 1/8 2527-361 3/16 2527-362 1/4 2527-363 5/16 2527-364 3/8 1027-365 1/2 1027-366 5/8 527-367 3/4 5

LOnG FLARe nUT

Part Tube Pkgno. Size Qty27-368 1/8 2527-369 3/16 2527-370 1/4 2527-371 5/16 2527-372 3/8 1027-373 1/2 1027-374 5/8 5

FLARe CAP

Part Tube Pkgno. Size Qty27-379 1/4 1027-380 3/8 1027-381 1/2 10

FLARe PLUG

Part Tube Pkgno. Size Qty27-386 1/4 1027-387 3/8 10Parker 639F, Imperial eastman 639-F

FLARe SWIVeL COnneCTOR

Tube to TubePart Tube Pkgno. Size Qty27-918 1/4 527-919 5/16 527-920 3/8 527-921 1/2 5Parker 14FSV

Parker 41FS, Weatherhead 1110, edelmann 141/B-41S, Imperial eastman 41-FS

Parker 41FL, Weatherhead 41-F, edelmann 141/B-41, Imperial eastman 641-F

Parker 640F, Imperial eastman 640-FB

FLARe GASKeT

Part Tube Pkgno. Size Qty27-914 1/4 2527-915 5/16 2527-916 3/8 2527-917 1/2 25Parker 2GF, Imperial eastman 625-F

FeMALe FLARe COnneCTOR

Tube to TubePart Tube Pkgno. Size Qty27-922 1/4 527-924 3/8 527-925 1/2 5

FeMALe FLARe TOMALe FLARe RedUCeR

Tube to Tube

Part Tube Size Pkgno. Female Male Qty27-926 1/4 3/8 527-927 3/8 1/4 527-928 3/8 1/2 527-929 3/8 5/8 527-930 1/2 1/4 527-931 1/2 3/8 527-932 1/2 5/8 5

FLARe RedUCInG UnIOn

Tube to Tube

Part Tube Tube Pkgno. Size Size Qty27-933 5/16 1/4 1027-934 3/8 1/4 1027-935 3/8 5/16 1027-936 1/2 1/4 527-937 1/2 3/8 527-938 5/8 1/2 5

Parker 660FHd

Parker 661FHd, Imperial eastman 661-FA

Parker 42F, Imperial eastman 656-F

FLARe UnIOnTube to Tube

Part Tube Pkgno. Size Qty27-634 1/8 1027-441 3/16 1027-442 1/4 1027-443 5/16 1027-444 3/8 1027-445 1/2 527-446 5/8 527-447 3/4 5Parker 42F, Weatherhead 42, edelmann 142/B-42, Impe-rial eastman 642-F

FLARe UnIOn eLBOW

Tube to TubePart Tube Pkgno. Size Qty27-353 1/4 1027-354 5/16 1027-355 3/8 527-356 1/2 5

FLARe UnIOn TeeTube to Tube to Tube

Part Tube Pkgno. Size Qty27-413 1/4 527-414 3/8 527-635 1/2 527-636 5/8 5

Parker 155F, Weatherhead 55, edelmann 155/B-55, Imperial eastman 649-F


FLARe MALe BRAnCH Tee


Part Tube Pipe Pkgno. Size Size Qty27-405 3/16 1/8 527-406 1/4 1/8 527-407 1/4 1/4 527-408 5/16 1/4 527-409 3/8 1/4 527-410 3/8 3/8 527-411 1/2 3/8 527-412 1/2 1/2 527-637 5/8 3/8 527-638 5/8 1/2 5Parker 145F, Weatherhead 45, edelmann 145/B-45, Imperial eastman 645-F


Brass Flare Fittings, SAe 45°


FLARe MALe COnneCTOR

Tube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty27-421 1/8 1/8 1027-422 3/16 1/8 1027-423 3/16 1/4 1027-424 1/4 1/8 1027-425 1/4 1/4 1027-426 1/4 3/8 1027-427 5/16 1/8 1027-428 5/16 1/4 1027-429 3/8 1/8 1027-430 3/8 1/4 1027-431 3/8 3/8 1027-432 3/8 1/2 1027-433 1/2 1/4 527-434 1/2 3/8 527-435 1/2 1/2 527-436 5/8 3/8 527-437 5/8 1/2 527-438 5/8 3/4 527-439 3/4 1/2 527-440 3/4 3/4 5Parker 48F, Weatherhead 48, edelmann 148/B-48, Impe-rial eastman 648-F

Parker 46F, Weatherhead 46, edelmann 146/B-46, Impe-rial eastman 646-F

Parker 149F, Weatherhead 49

FLARe MALe RUn TeeTube to Male Pipe to Tube

Part Tube Pipe Pkgno. Size Size Qty27-416 1/4 1/8 527-417 1/4 1/4 527-418 3/8 1/4 527-639 1/2 3/8 527-640 5/8 1/2 5

FeMALe FLARe TOMALe PIPe AdAPTeR

Tube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty27-939 1/4 1/8 1027-940 1/4 1/4 1027-941 3/8 1/4 1027-942 3/8 3/8 1027-943 1/2 3/8 527-944 1/2 1/2 5Parker 664FHd, Imperial eastman 664-F

FLARe FeMALe COnneCTOR

Tube to Female PipePart Tube Pipe Pkgno. Size Size Qty27-448 1/8 1/8 1027-449 3/16 1/8 1027-450 1/4 1/8 1027-451 1/4 1/4 1027-452 1/4 3/8 1027-453 5/16 1/8 1027-454 5/16 1/4 1027-455 3/8 1/8 1027-456 3/8 1/4 1027-457 3/8 3/8 1027-458 3/8 1/2 1027-459 1/2 1/4 527-460 1/2 3/8 527-461 1/2 1/2 527-643 5/8 1/2 5

FLARe 90° MALe eLBOW

Tube to Male PipePart Tube Pipe Pkgno. Size Size Qty27-330 1/8 1/8 1027-331 3/16 1/8 1027-332 1/4 1/8 1027-333 1/4 1/4 1027-334 1/4 3/8 1027-335 5/16 1/8 1027-336 5/16 1/4 1027-337 3/8 1/8 1027-338 3/8 1/4 1027-339 3/8 3/8 1027-340 3/8 1/2 1027-341 1/2 1/4 527-342 1/2 3/8 527-343 1/2 1/2 527-344 1/2 3/4 527-345 5/8 3/8 527-346 5/8 1/2 527-347 5/8 3/4 527-641 3/4 1/2 527-642 3/4 3/4 5

45° MALe eLBOWTube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty27-644 1/4 1/8 1027-348 1/4 1/4 1027-349 3/8 1/4 1027-350 3/8 3/8 1027-351 1/2 3/8 527-352 1/2 1/2 5Parker 159F, Weatherhead 54, Imperial eastman 654-F


FLARe 90° FeMALe eLBOW

Tube to Female Pipe



Poly-Tite Brass FittingsPOLy-TITe SLeeVe

An acetal resin (plastic) sleeve that remains captive in the nut. Brass sleeves in 1/8 and 3/16 available on special orderPart Tube Pkgno. Size Qty27-522 1/4 10027-523 5/16 10027-524 3/8 10027-702 1/2 100

POLy-TITe nUT And SLeeVe

ASSeMBLyA two piece assembly consisting of a brass tube nut and captive plastic sleeve. The brass tube nut alone is available on special order.Part Tube Pkgno. Size Qty27-674 1/8* 2527-526 3/16* 2527-527 1/4 2527-528 5/16 2527-529 3/8 2527-530 1/2 25

POLy-TITe UnIOnTube to Tube

Part Tube Pkgno. Size Qty27-533 1/8* 1027-534 3/16* 1027-535 1/4 1027-536 5/16 1027-537 3/8 1027-538 1/2 10

POLy-TITe UnIOn TeeTube to Tube to Tube

Part Tube Pkgno. Size Qty27-672 1/8* 527-541 3/16* 527-542 1/4 527-543 5/16 527-544 3/8 527-545 1/2 5

POLy-TITe MALe RUn Tee

Tube to Male Pipe to Tube

Part Tube Pipe Pkgno. Size Size Qty27-577 1/4 1/8 527-578 1/4 1/4 527-673 3/8 1/4 5

POLy-TITe MALe BRAnCH Tee


Part Tube Pipe Pkgno. Size Size Qty27-579 3/16* 1/8 527-580 1/4 1/8 527-581 1/4 1/4 527-582 3/8 1/4 5

POLy-TITe MALe COnneCTOR

Tube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty27-485 1/8* 1/16 1027-486 1/8* 1/8 1027-554 3/16* 1/8 1027-555 1/4 1/8 1027-556 1/4 1/4 1027-557 1/4 3/8 527-558 5/16 1/8 1027-559 5/16 1/4 1027-560 3/8 1/8 1027-561 3/8 1/4 1027-562 3/8 3/8 527-563 1/2 3/8 5

POLy-TITe FeMALe COnneCTOR

Tube to Female Pipe

Part Tube Pipe Pkgno. Size Size Qty27-671 1/8** 1/8 1027-546 3/16** 1/8 1027-547 3/16** 1/4 1027-548 1/4 1/8 1027-549 1/4 1/4 1027-550 5/16 1/8 527-551 3/8 1/4 527-552 1/2 3/8 5

POLy-TITe 90° MALe eLBOW

Tube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty27-670 1/8** 1/8 527-565 3/16** 1/8 1027-566 1/4 1/8 1027-567 1/4 1/4 1027-568 1/4 3/8 527-569 5/16 1/8 1027-570 3/8 1/8 1027-571 3/8 1/4 1027-572 3/8 3/8 527-573 1/2 3/8 5

POLy TITe 90° FeMALe eLBOW

Tube to Female Pipe

Part Tube Pipe Pkgno. Size Size Qty27-574 1/4 1/8 1027-575 1/4 1/4 1027-576 3/8 1/4 10

Parker 60P, Imperial eastman 260-P



Parker 164P & 264P, Imperial eastman 264-P



Parker 68P, Imperial eastman 268-P* 1/8 and 3/16 tube size sleeves supplied in brass and do not have tube support.


Parker 169P & 269P, Imperial eastman 269-P** 1/8 and 3/16 tube size sleeves supplied in brass and do not have tube support.



PUSH-In MALe COnneCTOR

Tube to Male Pipe

IndustrialPart Tube Pipe Pkgno. Size Size Qty27-945 1/8 1/8 1027-946 1/4 1/8 1027-947 1/4 1/4 1027-948 3/8 1/8 1027-949 3/8 1/4 1027-950 3/8 3/8 527-951 1/2 3/8 5

Airbrake*27-987 1/4 1/8 1027-988 1/4 1/4 1027-989 3/8 1/4 1027-990 3/8 3/8 527-991 3/8 1/2 227-992 1/2 3/8 527-993 1/2 1/2 2

PUSH-In 90° RIGId MALe eLBOW

Tube to Male Pipe

IndustrialPart Tube Pipe Pkgno. Size Size Qty27-952 1/8 1/8 527-953 1/4 1/8 527-954 1/4 1/4 527-955 3/8 1/8 527-956 3/8 1/4 527-957 3/8 3/8 527-958 1/2 3/8 5

Airbrake*27-994 1/4 1/8 527-995 1/4 1/4 527-996 3/8 1/4 527-997 3/8 3/8 527-998 1/2 3/8 527-999 1/2 1/2 2

*Airbrake Style Push-In Fittings are marked "D.O.T."

• IndUSTRIAL STyLe for use with standard pressure plastic tubings • AIRBRAKe STyLe for use with SAE J844 Nylon Air Brake Tubing have built-in tubing support • O-ring seal holds pressures up to that of the tubing being used • Easy to

use; simply cut tubing square and push into the fitting • Emergency repairs are quick • To remove old tubing, just push on the brass release collar and pull the tubing out. • Fittings do not need to be removed to install new tubing

Push-In Brass Fittings

PUSH-In SWIVeL MALe

RUn TeeTube to Male Pipe to Tube

IndustrialPart Tube Pipe Pkgno. Size Size Qty27-974 1/8 1/8 527-975 1/4 1/8 527-976 1/4 1/4 527-977 3/8 1/4 227-978 3/8 3/8 227-979 1/2 3/8 2

PUSH-In 90° SWIVeL MALe eLBOW

Tube to Male Pipe

IndustrialPart Tube Pipe Pkgno. Size Size Qty27-959 1/8 1/8 527-960 1/4 1/8 527-961 1/4 1/4 527-963 3/8 1/4 527-964 3/8 3/8 527-965 1/2 3/8 5

Airbrake*27-1000 1/4 1/8 527-1001 1/4 1/4 527-1002 3/8 1/4 527-1003 3/8 3/8 527-1004 1/2 3/8 527-1005 1/2 1/2 2

PUSH-InUnIOnTube to Tube

IndustrialPart Tube Pkgno. Size Qty27-966 1/8 1027-967 1/4 1027-968 3/8 527-969 1/2 5

Airbrake*27-1006 1/4 1027-1007 3/8 527-1008 1/2 5

PUSH-InUnIOn TeeTube to Tube to Tube

IndustrialPart Tube Pkgno. Size Qty27-970 1/8 527-971 1/4 527-972 3/8 227-973 1/2 2

Airbrake*27-1009 1/4 527-1010 3/8 227-1011 1/2 2

PUSH-In SWIVeL MALe BRAnCH Tee

Tube to Tube to Male Pipe Industrial

Part Tube Pipe Pkgno. Size Size Qty27-980 1/8 1/8 527-981 1/4 1/8 527-982 1/4 1/4 527-983 3/8 1/8 227-984 3/8 1/4 227-985 3/8 3/8 227-986 1/2 3/8 2


PUSH-InMALe STeM

COnneCTORSTube to Male Pipe

Use to create a male swivel connectors, run or branch tees, and swivel elbows from union fittings. Just plug it in!

Part Tube Pipe Pkgno. Size Size Qty13-582 1/4 1/8 1013-583 1/4 1/4 1013-584 3/8 1/4 1013-585 3/8 3/8 1013-586 1/2 1/4 1013-587 1/2 3/8 1013-588 1/2 1/2 10

Acetal Instant Push-In Tube Fittings

PUSH-In MALe COnneCTOR

Tube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty13-550 1/4 1/8 1013-551 1/4 1/4 1013-552 1/4 3/8 1013-553 3/8 1/8 1013-554 3/8 1/4 1013-555 3/8 3/8 1013-556 3/8 1/2 1013-557 1/2 3/8 1013-558 1/2 1/2 10

PUSH-In90° MALe eLBOW

Tube to Male Pipe


PUSH-In UnIOnTube to Tube


PUSH-In UnIOn 90° eLBOW

Tube to Tube


PUSH-In UnIOn Tee

Tube to Tube


PUSH-In 90° MALe SWIVeL

eLBOWTube to Male Pipe

Part Tube Pipe Pkgno. Size Size Qty13-564 1/4 1/8 1013-565 1/4 1/4 1013-566 1/4 3/8 1013-567 3/8 1/8 1013-568 3/8 1/4 1013-569 3/8 3/8 1013-570 1/2 1/4 1013-571 1/2 3/8 1013-572 1/2 1/2 10

Used in agricultural fertilizer applications, air lines and sanitary lines. Made of FDA and NSF-61approved materials. Temperature range: -4°F to 158°F. Working pressure: 1/4" 230 psi, 3/8" & 1/2" 150 psi. Warning: Not for Truck Airbrake use.


nyLOn COMPReSSIOnUnIOn Tee

Tube to Tube to Tube.


nylon Compression FittingsMolded nylon for extra strength. Use with polyethylene or nylon tubing. All compression nuts are complete with ‘built-in’ plastic ferrules. Leak-proof, vibration-proof and corrosion-proof.

All nylon construction - No metal parts! No o-rings!

nyLOn COMPReSSIOnMALe COnneCTOR

Tube to Male Pipe.

Part Tube Pipe Pkgno. Size Size Qty27-1021 1/4 1/8 1027-1022 1/4 1/4 1027-1023 3/8 1/4 1027-1024 3/8 3/8 1027-1025 1/2 3/8 527-1026 1/2 1/2 5

nyLOn COMPReSSIOnnUT ASSeMBLy

With ‘built-in’ plastic ferrules


nyLOn COMPReSSIOn90° MALe eLBOW

Tube to Male Pipe.

Part Tube Pipe Pkgno. Size Size Qty27-1027 1/4 1/8 1027-1028 1/4 1/4 1027-1029 3/8 1/4 1027-1030 3/8 3/8 1027-1031 1/2 3/8 527-1032 1/2 1/2 5

nyLOn TUBe InSeRTSupport sleeve for soft wall tubing.


nyLOn COMPReSSIOnMALe RUn Tee

Tube to Male Pipe to Tube.

Part Tube Pipe Pkgno. Size Size Qty27-1036 1/4 1/4 1027-1037 3/8 3/8 10

nyLOn COMPReSSIOnMALe BRAnCH Tee

Tube to Tube to Male Pipe.

Part Tube Pipe Pkgno. Size Size Qty27-1038 1/4 1/4 1027-1039 3/8 3/8 10

nyLOn COMPReSSIOn UnIOnTube to Tube.



Double wall, copper fused, double flared, and tin coated. Annealed

for easy bending. Resists kinking.

SHORT InVeRTed

FLARe nUT

BrassPart Tube Pkgno. Size Qty27-279 3/16 2527-280 1/4 2527-281 5/16 2527-282 3/8 25

SteelPart Tube Pkgno. Size Qty27-285 3/16 2527-286 1/4 2527-287 5/16 2527-288 3/8 25

Automotive grade. Constructed of the same material as standard brake lines. Tin coated. Bends and flares easily. Wall thickness: .028". 25 ft per roll.

Part no. Size O.d. Pkg15-114 3/16 1 RL15-115 1/4 1 RL15-116 5/16 1 RL15-117 3/8 1 RL

Wall mountable rack holds all popular length brake lines. Brake lines sold separately.

Part Holdsno. Sizes98-016 3/16 and 1/4 O.D.98-017 5/16 O.D.98-018 3/8 O.D.

LOnG STeeL FLARe nUT

Part Tube Pkgno. Size Qty27-390 3/16 2027-391 1/4 10

Steel Hydraulic Brake Lines

double Wall Steel Tubing

Part Tube Pkgno. Size Qty27-291 3/16 1027-292 1/4 1027-293 5/16 1027-294 3/8 10

Brass Inverted Flare Union

BRAKe LIne RACKS

3/16"Part no. Length Pkg99-190 8" 1099-192 12" 1099-196 20" 1099-200 30" 1099-206 40" 1099-211 51" 1099-215 60" 10

1/4"99-191 8" 1099-193 12" 1099-197 20" 1099-201 30" 1099-207 40" 1099-212 51" 1099-216 60" 10

5/16"99-194 12" 599-198 20" 599-202 30" 599-208 40" 599-213 51" 599-217 60" 5

3/8"99-195 12" 499-199 20" 499-203 30" 499-209 40" 499-214 51" 499-218 60" 4


BRASS PIPe 90° eLBOWExtruded Automotive Design

Part Pipe Pkgno. Size Qty13-136 1/8 1013-137 1/4 1013-138 3/8 513-367 1/2 5

Reducing Sizes13-411 1/4 x 1/8 513-412 3/8 x 1/4 513-413 1/2 x 3/8 5

BRASS PIPe 45° eLBOWExtruded Automotive Design


BRASS PIPe 45° STReeT eLBOWS

Extruded Automotive Design


Brass Pipe Fittings

BRASS PIPe TeeExtruded Automotive Design


BRASS PIPe UnIOnS

Part Pipe Pkgno. Size Qty13-203 1/8 213-204 1/4 213-205 3/8 213-206 1/2 213-207 3/4 2

BRASS PIPe COUPLInGSExtruded Automotive Design


BRASS PIPe 90° STReeT eLBOW



BRASS PIPe 90° MALe eLBOW

Forged


BRASS PIPe RUn Tee(Street Tee)



BRASS PIPe BRAnCH Tee



BRASS PIPe CAPSHex Automotive Design



Brass Pipe FittingsBRASS RedUCInG

COUPLInGS (Bell Reducers)

Hex Automotive Design

Part Pipe Pkgno. Size Qty13-222 1/4 x 1/8 1013-223 3/8 x 1/8 513-224 3/8 x 1/4 513-225 1/2 x 1/4 513-226 1/2 x 3/8 513-227 3/4 x 1/4 213-228 3/4 x 3/8 213-229 3/4 x 1/2 213-230 1 x 3/4 2

BRASS PIPe BUSHInGS

Part Male Female Pkgno. Pipe Pipe Qty13-241 1/4 1/8 1013-242 3/8 1/8 1013-243 3/8 1/4 1013-244 1/2 1/8 513-245 1/2 1/4 513-246 1/2 3/8 1013-247 3/4 1/8 513-248 3/4 1/4 513-249 3/4 3/8 513-250 3/4 1/2 513-251 1 1/4 513-252 1 3/8 513-253 1 1/2 513-254 1 3/4 5

BRASS SQUARe HeAd PIPe PLUGS

Part Pipe Pkgno. Size Qty13-164 1/8 1013-165 1/4 1013-166 3/8 1013-167 1/2 1013-168 3/4 513-169 1 513-170 1-1/4 213-171 1-1/2 213-172 2 2

BRASS Hex HeAd PIPe PLUGS

Part Pipe Pkgno. Size Qty13-176 1/8 1013-177 1/4 1013-178 3/8 1013-179 1/2 1013-180 3/4 513-392 1 5

BRASS SOCKeT PIPe PLUGS

Hex Countersunk


BRASS RedUCInG Hex nIPPLeS

Part Pipe Pkgno. Size Qty13-405 1/4 x 1/8 1013-406 3/8 x 1/8 513-407 3/8 x 1/4 513-408 1/2 x 1/4 513-409 1/2 x 3/8 513-410 3/4 x 1/2 5

BRASS PIPe AdAPTeRS

Part Female Male Pkgno. Pipe Pipe Qty13-231 1/8 1/8 1013-232 1/4 1/8 1013-233 1/4 1/4 1013-402 3/8 1/8 513-234 3/8 1/4 513-235 3/8 3/8 513-403 1/2 1/4 513-236 1/2 3/8 513-237 1/2 1/2 513-404 3/4 1/2 5

BRASS Hex nIPPLeS

Part Pipe Pkgno. Size Qty13-267 1/8 1013-268 1/4 1013-269 3/8 513-270 1/2 513-271 3/4 513-272 1 2


Brass Pipe nipplesPart Pkg no. Size Qty

1/8"13-273 Close 1013-274 1-1/2 1013-275 2 1013-276 2-1/2 513-277 3 513-278 3-1/2 513-279 4 513-280 4-1/2 513-281 5 513-282 5-1/2 513-283 6 5

1/4"13-284 Close 1013-285 1-1/2 1013-286 2 1013-287 2-1/2 513-288 3 513-289 3-1/2 513-290 4 513-291 4-1/2 513-292 5 513-293 5-1/2 513-294 6 5

3/8"13-295 Close 513-296 1-1/2 513-297 2 513-298 2-1/2 513-299 3 513-300 3-1/2 513-301 4 513-302 4-1/2 513-303 5 513-304 5-1/2 513-305 6 5

1/2"13-306 Close 513-307 1-1/2 513-308 2 513-309 2-1/2 513-310 3 513-311 3-1/2 513-312 4 513-313 4-1/2 513-314 5 513-315 5-1/2 513-316 6 5

3/4"13-317 Close 513-318 1-1/2 513-319 2 513-320 2-1/2 513-321 3 513-322 3-1/2 513-323 4 513-324 4-1/2 513-325 5 513-326 5-1/2 513-327 6 5

Part Pkgno. Size Qty17-081 1/4" x 520" 50 RL17-082 1/2" x 520" 50 RL17-013 1/2" x 1296" 50 RL17-083 3/4" x 520" 50 RL

Teflon® Pipe Tape

ValvesAIR BRAKe dRAIn COCK

• Lever handle • Male pipe thread• Hex shoulder • Machined brass

• 120 psi max. • For truck air brakes

Part Pipe Pkgno. Size Qty27-610 1/4 3

RAdIATOR dRAIn VALVe• Lever handle • Male Pipe Thread

• Hex shoulder • Cast Bronze • 15 psi max.

• For automotive radiator & industrial use


BIBB nOSe AIR COCK• Lever handle • Male Pipe Thread • Hex shoulder • Machined brass

• 80 psi max. • For air use only


InTeRnAL SeAT dRAIn COCK

• Hex shoulder • All machined brass• 150 psi max. • Handle is integral part of

extruded stem

Part Pipe Pkgno. Size Qty27-621 1/4 327-622 3/8 3

exTeRnAL SeAT dRAIn COCK

Needle Drain Cock

• Steel wing • Hex shoulder • Machined brass • 150 psi max.

• Most popular design for automotive radiators

Part Pipe Pkgno. Size Qty27-623 1/8 1027-624 1/4 1027-625 3/8 3

InTeRnAL SeAT dRAIn COCK

Needle Drain Cock

• Steel wing • Hex shoulder• Machined brass • 150 psi max.



Tee HAndLe AIR COCKS

Female pipe both ends. Round shoulders. Machined brass. Ground plug. 80 psi max. For air use only.


LeVeR HAndLe AIR COCKS

Female pipe both ends. Hex shoul-ders. Machined brass. Ground plug 80 psi max. For air use only.


FeMALe needLe VALVeS

Female pipe both ends. Machined brass body, steel wing handle. 150 psi max. for water, oil or gasoline.

Do not use with natural gas or LP gas


Valves

LeVeR HAndLe SHUT-OFF VALVe

Male pipe both ends. Hex shoulders. Cast bronze. Ground plug. 30 psi max. For air or water use (not for gas). Part Pipe Pkgno. Size Qty27-611 1/4 327-612 3/8 3

LeVeR HAndLe AIR COCK

Male pipe to female pipe. Hex shoul-ders. Machined brass. Ground plug. 80 psi max. For air use only. Part Pipe Pkgno. Size Qty 27-682 1/8 327-683 1/4 327-684 3/8 3


Female pipe both ends. Hex shoul-ders. Cast bronze. Ground plug. 30 psi max. For air or water use (not for gas). Part Pipe Pkgno. Size Qty27-591 1/8 327-594 1/4 327-599 3/8 327-613 1/2 3

Also available for natural gas service


Male pipe to female pipe. Hex shoul-ders. Cast bronze. Ground plug. 30 psi max. For air or water use. Part Pipe Pkgno. Size Qty27-686 1/8 327-605 1/4 3

MALe needLe VALVeS

Male pipe both ends. Machined brass body, steel wing handle. 150 psi max. for water, oil or gasoline.

Do not use with natural gas or LP gas


Safety Pop-Off Air Valves

Designed to protect air tanks from overpressure. Maximum operat-ing temperature is 250°F. All brass construction with chrome steel ball. 1/4" male NPT.

Part Preset Pkgno. Pressure Qty11-366 100 psi 111-367 125 psi 111-368 150 psi 111-369 175 psi 111-370 200 psi 1


CARBOn STeeL BALL VALVeS

Standard port. Female pipe both ends. 2,000 PSI for air, water, oil and gas. Made in U.S.A.

Part Pipe Pkgno. Size Qty13-122 1/4 113-123 3/8 113-124 1/2 113-125 3/4 113-126 1" 113-127 1-1/4 113-128 1-1/2 113-129 2" 1

ValvesBROnZe BALL

VALVeS

All cast bronze with Chrome plated ball. Teflon seat For water, oil, gas and air. Easy on-off with 90° quarter-turn lever handle.

dOMeSTIC1/4" to 1", 600 psi WOG, 150 psi saturated

steam.1-1/4" to 2", 400 psi WOG, 125 psi satu-

rated steam.Part Pipe Pkgno. Size Qty13-130• 1/4 613-131• 3/8 613-132• 1/2 613-133• 3/4 313-134• 1" 313-135 1-1/4 113-414 1-1/2 113-415 2" 1

IMPORTLightweight, 450 psi WOG, 150 psi satu-

rated steam.Part Pipe Pkgno. Size Qty13-102• 1/4 613-103• 3/8 613-104• 1/2 613-105• 3/4 313-106• 1" 313-107• 1-1/4 113-108• 1-1/2 113-109• 2" 1• Part numbers marked have full ports.

BROnZe GATe VALVeS

200 psi for water, oil or gas. 125 psi for saturated steam. Non-rising stem. Rugged cast bronze. Imported.

Part Pipe Pkgno. Size Qty13-111 3/8 113-112 1/2 113-113 3/4 113-114 1" 113-115 1-1/4 113-116 1-1/2 113-117 2" 1

HOSe TO MALe PIPePart Hose Pipe Pkgno. I.d. Thread Qty27-614 3/8 3/8 127-615 5/8 3/8 1

Truck Heater Valves

FeMALe PIPe TO MALe PIPe

Part Hose Pipe Pkgno. I.d. Thread Qty27-601 3/8 1/2 1

HOSe TO MALe PIPePart Hose Pipe Pkgno. I.d. Thread Qty27-616 5/8 1/2 127-617 3/4 1/2 1


Schedule 40 Welded Steel Pipe nipplesBlack fittings ideal for gas service. 150 psi, lightweight class 150.

NPT male both ends, chamfered threads. Meets ASTM A73, MIL- WW-P-521F, ANSI B-2.1, B-16.3. Made in U.S.A..

Part Pkg no. Size Qty

1/8"11-206 Close 1011-207 1-1/2 1011-208 2" 1011-209 2-1/2 1011-210 3" 1011-211 3-1/2 511-212 4" 511-213 4-1/2 511-214 5" 511-215 5-1/2 511-216 6" 5

1/4"11-217 Close 1011-218 1-1/2 1011-219 2" 1011-220 2-1/2 1011-221 3" 1011-222 3-1/2 511-223 4" 511-224 4-1/2 511-225 5" 511-226 5-1/2 511-227 6" 5

3/8"11-228 Close 1011-229 1-1/2 1011-230 2" 1011-231 2-1/2 1011-232 3" 1011-233 3-1/2 511-234 4" 511-235 4-1/2 511-236 5" 511-237 5-1/2 511-238 6" 5

1/2"11-241 Close 1011-242 1-1/2 1011-243 2" 1011-244 2-1/2 1011-245 3" 1011-246 3-1/2 511-247 4" 511-248 4-1/2 511-249 5" 511-250 5-1/2 511-251 6" 5


3/4"11-255 Close 1011-256 1-1/2 1011-257 2" 1011-258 2-1/2 1011-259 3" 1011-260 3-1/2 511-261 4" 511-262 4-1/2 511-263 5" 511-264 5-1/2 511-265 6" 5

1"11-266 Close 511-267 2" 511-268 2-1/2 511-269 3" 511-270 3-1/2 311-271 4" 311-272 4-1/2 311-273 5" 311-274 5-1/2 311-275 6" 3

1-1/4"11-276 Close 111-277 2" 111-278 2-1/2 111-279 3" 111-280 3-1/2 111-281 4" 111-282 4-1/2 111-283 5" 111-284 5-1/2 111-285 6" 1

1-1/2"11-287 Close 111-288 2" 111-289 2-1/2 111-290 3" 111-291 3-1/2 111-292 4" 111-293 4-1/2 111-294 5" 111-295 5-1/2 111-296 6" 1


2"11-297 Close 111-298 2-1/2 111-299 3" 111-300 3-1/2 111-301 4" 111-302 4-1/2 111-303 5" 111-304 5-1/2 111-305 6" 1

3"11-163 Close 111-166 4" 111-168 5" 111-170 6" 1

Part Pkgno. Size Qty17-081 1/4" x 520" 50 RL17-082 1/2" x 520" 50 RL17-013 1/2" x 1296" 50 RL17-083 3/4" x 520" 50 RL

Teflon® Pipe Tape


150# Malleable Iron Pipe Fittings90° eLBOWS

Part Pipe Pkg no. Size Qty11-000 1/8 1011-001 1/4 1011-002 3/8 1011-003 1/2 1011-004 3/4 511-005 1" 511-006 1-1/4 111-007 1-1/2 111-008 2" 111-009 2-1/2 111-010 3" 1

45° STReeT eLBOWS

Part Pipe Pkg no. Size Qty11-031 1/8 511-032 1/4 511-033 3/8 511-034 1/2 511-035 3/4 511-036 1" 311-037 1-1/4 111-038 1-1/2 111-039 2" 1

UnIOnS

Part Pipe Pkg no. Size Qty11-048 1/8 511-049 1/4 511-050 3/8 511-051 1/2 511-052 3/4 511-053 1" 311-054 1-1/4 111-055 1-1/2 111-056 2" 1

45° eLBOW


90° STReeT eLBOW


PIPe TeeS


PIPe COUPLInGS*


*Furnished in steel.

RedUCeRS

Part Pipe Pkgno. Size Qty11-171 1/4 x 1/8 1011-172 3/8 x 1/8 1011-173 3/8 x 1/4 1011-174 1/2 x 1/8 1011-175 1/2 x 1/4 1011-176 1/2 x 3/8 1011-177 3/4 x 1/8 511-178 3/4 x 1/4 511-179 3/4 x 3/8 511-180 3/4 x 1/2 511-184 1" x 1/2 511-185 1" x 3/4 511-188 1-1/4 x 1/2 111-189 1-1/4 x 3/4 111-190 1-1/4 x 1" 111-195 1-1/2 x 1-1/4 111-200 2" x 1-1/2 1


150# Malleable Iron Pipe FittingsMachined Steel Hex

Bushings

Part Pipe Pkgno. Size Qty11-125 1/4 x 1/8 1011-126 3/8 x 1/8 1011-127 3/8 x 1/4 1011-128 1/2 x 1/8 1011-129 1/2 x 1/4 1011-130 1/2 x 3/8 1011-131 3/4 x 1/8 1011-132 3/4 x 1/4 1011-133 3/4 x 3/8 1011-134 3/4 x 1/2 1011-137 1" x 3/8 511-138 1" x 1/2 511-139 1" x 3/4 5

Cast Iron Hex Bushings

Part Pipe Pkgno. Size Qty11-142 1-1/4 x 1/2 111-143 1-1/4 x 3/4 111-144 1-1/4 x 1" 111-147 1-1/2 x 1/2 111-148 1-1/2 x 3/4 111-149 1-1/2 x 1" 111-150 1-1/2 x 1-1/4 111-152 2" x 1/2 111-153 2" x 3/4 111-154 2" x 1" 111-155 2" x 1-1/4 111-156 2" x 1-1/2 111-159 2-1/2 x 2" 111-160 3" x 2" 1

*Furnished in steel

Machined Steel Hex Pipe Caps

Part Pipe Pkgno. Size Qty11-088* 1/8 1011-089* 1/4 1011-090* 3/8 1011-091* 1/2 1011-092* 3/4 511-093* 1" 5

Cast Iron Pipe Caps

Part Pipe Pkgno. Size Qty11-094 1-1/4 111-095 1-1/2 111-096 2" 111-097 2-1/2 111-098 3" 1

MACHIned STeeL SQUARe HeAd PLUGS

Part Pipe Pkgno. Size Qty11-099* 1/8 1011-100* 1/4 1011-101* 3/8 1011-102* 1/2 1011-103* 3/4 5

CAST IROn SQUARe HeAd PLUGS

Part Pipe Pkgno. Size Qty11-104 1" 511-105 1-1/4 511-106 1-1/2 511-107 2" 511-325 2-1/2 111-326 3" 1

MACHIned STeeL COUnTeRSUnK Hex

PLUGS

Part Pipe Pkgno. Size Qty11-375* 1/16 1011-113* 1/8 1011-114* 1/4 1011-115* 3/8 1011-116* 1/2 1011-117* 3/4 5

CAST IROn COUnTeRSUnK SQUARe

PLUGS

Part Pipe Pkgno. Size Qty11-118 1" 511-327 1-1/4 511-328 1-1/2 511-329 2" 5

STeeL Hex HeAd PLUGS

Part Pipe Pkgno. Size Qty11-108 1/8 1011-109 1/4 1011-110 3/8 1011-111 1/2 1011-112 3/4 511-356 1" 5

dRy-SeAL SOCKeT PReSSURe PLUGS

Precision machined 7/8" taper keeps plug flush with surface and creates a leakproof seal without using seal-ing tape or compound. Made from heat treated alloy steel. Deep hex countersink. Pressure rating is 5,000 PSI. Plain finish.

Part Pipe Pkgno. Size Qty12-299 1/16 1012-300 1/8 1012-301 1/4 1012-302 3/8 1012-303 1/2 1012-304 3/4 512-305 1" 5


BLACK PIPe FITTInG ASSORTMenT28 SIzES, 1/8" TO 1/2" PIPE IN A LARGE STEEL

DRAWER. PART nO. 16-5632

BLACK PIPe nIPPLe ASSORTMenT 20 SIzES, 1/8" TO 1/2" PIPE IN A LARGE STEEL

DRAWER. PART nO. 16-5624

BLACK PIPe nIPPLe ASSORTMenT35 SIzES, 1/8" TO 3/4" PIPE IN A 40-HOLE BIN.

PART nO. 40-109

BLACK PIPe FITTInG ASSORTMenT34 SIzES, 1/8" TO 3/4" PIPE IN A 40-HOLE BIN.

PART nO. 40-108

BLACK PIPe FITTInG ASSORTMenT(LARGE SIzES) 28 SIzES, 1" TO 2" PIPE IN

A 40-HOLE BIN. PART nO. 40-117

BLACK PIPe nIPPLe ASSORTMenT(LARGE SIzES) 24 SIzES, 1" TO 2" PIPE IN

A 40-HOLE BIN. PART nO. 40-119

PIPe nIPPLe ASSORTMenTS PIPe FITTInG ASSORTMenTS

150# Malleable Iron Pipe Fittings Assortments


nUT WITH SPRInG GUARd

Part no. Pkg5507 5

HOSe COnneCTOR WITH SPRInG GUARd

Part no. Pipe Thread Pkg5500 1/4 55501 3/8 55502 1/2 5

Air Brake Hose Fittings

Reusable hose ends. For use with 3/8" Rubber Air Brake Hose.COnneCTOR BOdy

(InSeRT)


HOSe COnneCTOR


UnIOn

Part no. Pkg5509 2

SLeeVe

Part no. Pkg5508 10

HOSe nUT

Part no. Pkg5506 10

Industrial 1/4" Series Quick disconnect Couplers & nipples

Couplers are valved to avoid pressure loss when disconnected. Couplers and Nipples are made of steel,

except where marked. To connect; pull back sleeve, insert nipple and release sleeve.

300 psi max. working pressure.

Actual Size: 1/4" series

1/4" SeriesMALe PIPe COUPLeRS

Part Pipe Pkgno. Size Qty5556 1/4 105557 3/8 10

1/4 Series FeMALe PIPe THReAd nIPPLeS


1/4" SeriesFeMALe PIPe COUPLeRS

Part Pipe Pkgno. Size Qty5550* 1/4 105551* 3/8 10

* Brass body & sleeve

1/4 Series MALe PIPe THReAd nIPPLeS


1/4" SeriesHOSe BARB COUPLeRS

Part Hose I.d. Pkgno. Size Qty5562 1/4 105563 3/8 10

1/4" SeriesHOSe BARB nIPPLeS

Part Hose I.d. Pkgno. Size Qty5587 1/4 105588 3/8 10


Industrial 3/8" Series Quick disconnect Couplers & nipples


Couplers are valved to avoid pressure loss when disconnected. Couplers and Nipples are made of steel.

To connect; pull back sleeve, insert nipple and release sleeve. 300 psi max. working pressure.

3/8 Series MALe PIPe COUPLeRS


3/8 Series MALe PIPe THReAd nIPPLeS


3/8 Series FeMALe PIPe COUPLeRS


3/8 Series FeMALe PIPe THReAd nIPPLeS


3/8 Series HOSe BARB COUPLeRS

Part Hose I.d. Pkgno. Size Qty5564 3/8 2

3/8" SeriesHOSe BARB nIPPLeS

Part Hose I.d. Pkgno. Size Qty5590 3/8 2


Industrial 1/2" Series

Quick disconnect Couplers &

nipples

Couplers are valved to avoid pressure loss when disconnected. Couplers and Nipples are made of steel. To connect; pull back sleeve, insert nipple and release sleeve.

300 psi max. working pressure.

1/2" Series MALe PIPe COUPLeRS

Part Pipe Pkgno. Size Qty5560 1/2 2

1/2" Series MALe PIPe THReAd nIPPLeS


1/2" Series FeMALe PIPe COUPLeRS


1/2" Series FeMALe PIPe THReAd nIP-

PLeS



Actual Size: 1/4" series Actual Size: 1/4" series

Aro 210 1/4"Series

QUICK dISCOnneCT COUPLeRS & nIPPLeS

Made of steel. 300 psi max. working pressure.

Lincoln 1/4"Series

QUICK dISCOnneCT COUPLeRS & nIPPLeS

Couplers are valved to avoid pressure loss when disconnected. Couplers have brass sleeves and bodies. Nipples are made of steel. To connect; pull back sleeve, insert nipple and release sleeve. 300 psi max.

working pressure.

1/4 SeRIeSMALe PIPe COUPLeR


1/4 SeRIeS MALe PIPe nIPPLe


1/4 SeRIeS FeMALe PIPe COUPLeR


1/4 SeRIeS FeMALe PIPe nIPPLe


1/4 SeRIeSFeMALe PIPe COUPLeR


1/4 SeRIeS MALe PIPe nIPPLe


1/4 SeRIeS MALe PIPe COUPLeR


1/4 SeRIeS FeMALe PIPe nIPPLe



MALe PIPe THReAd nIPPLeS


MALe PIPe COUPLeRS


FeMALe PIPe COUPLeRS


FeMALe PIPe THReAd nIPPLeS




MALe PIPe COUPLeRS









Part Pipe Pkgno. Size Qty5554* 1/2 2



* Steel sleeve and body.

1/4" Series 3/8" series 1/2" Series

Actual size:

Tru-flate QUICK dISCOnneCTS & nIPPLeS

Couplers are valved to avoid pressure loss when disconnected. Couplers have brass sleeves and bodies, except where marked. Nipples are made of steel. To connect; pull back sleeve, insert nipple and release sleeve. 300 psi max. working pressure.

1/4" SeRIeS 3/8" SeRIeS 1/2" SeRIeSMALe PIPe COUPLeRS

Part Pipe Pkgno. Size Qty5560* 1/2 2


Automatically connected by pushing the nipple into the coupler. When the outer sleeve moves forward, the coupler is automatically locked into place and is ready for use. To disconnect, just pull the sleeve back and remove nipple. Air flow stops when plug is removed. Unique slim design prevents accidental disconnect when used on end of flexible air lines. Made of brass. Conforms to MIL-4109 specifications. 300 psi max. working pressure.




Push To ConnectAir Couplers

nylon Coil Air Hose

Withstands working pressure up to 200 PSI Recoils to a fraction of its full length to return tool to safe location. 1/4" swivel male NPT both ends.

Part no. Hose Size Pkg4830 1/4 I.D. x 17' 14831 1/4 I.D. x 25' 14832 1/4 I.D. x 50' 14833 3/8 I.D. x 17' 14834 3/8 I.D. x 25' 14835 3/8 I.D. x 50' 1

STRAIGHT THRU COUPLeRSBrass with stainless steel balls and springs.

Part Pipe Operating Pkgno. Series Size PSI Qty11-311 1/4" 1/4 Female 4500 611-371 3/8" 3/8 Female 3500 611-372 3/8" 3/8 Male 3500 6

STRAIGHT THRU nIPPLeSZinc plated hardened steel.

Part Pipe Operating Pkgno. Series Size PSI Qty11-312 1/4" 1/4 Male 4500 611-373 3/8" 3/8 Female 3500 611-374 3/8" 3/8 Male 3500 6

1/4" Series 3/8" series

Actual size:

nO VALVeSSmooth, straight thru bore gives maximum flow with minimum pressure drop. Applications: pressure wash-ers, steam washers, carpet cleaners, air lines, mold coolant lines, fluid transfer lines. Open bore allows complete clean-ability. Warning: Do not disconnect with pressure in the line.

Straight-Thru Couplers & nipples


60 Series Hydraulic Couplers The Industrial Quick Connect series features poppet style shut-off valves in both the coupler and the plug.• designed to prevent fluid loss when the coupler is disconnected• meets dimensional requirements of Series B in ISO 7241-1• interchangeable with Parker-Hannifin 60 series• seal material is Buna-N

dUST CAPSPart Body Pkgno. Series Size Material Qty11-317 60 1/4 Polyurethane 111-318 60 3/8 Polyurethane 111-319 60 1/2 Polyurethane 111-364 60 3/4 Polyurethane 1

dUST PLUGSPart Body Pkgno. Series Size Material Qty11-314 60 1/4 Polyurethane 111-315 60 3/8 Polyurethane 111-316 60 1/2 Polyurethane 111-365 60 3/4 Polyurethane 1

1/4 Body Size 3/8 Body Size 1/2 Body Size 3/4 Body Size

ACTUAL SIZe PROFILe

60 SeRIeS COUPLeRSPkg. Qty. 1 each

Part Body Pipe Pressure no. Size Size Material Rating5620 1/4 1/4 NPTF Steel 5000 psi5621 3/8 3/8 NPTF Steel 4000 psi5622 1/2 1/2 NPTF Steel 4000 psi5623 3/4 3/4 NPTF Steel 2500 psi

60 SeRIeS nIPPLeSPkg. Qty. 1 each

Part Body Pipe Pressure no. Size Size Material Rating5628 1/4 1/4 NPTF Steel 5000 psi5629 3/8 3/8 NPTF Steel 4000 psi5630 1/2 1/2 NPTF Steel 4000 psi5631 3/4 3/4 NPTF Steel 2500 psi


dUST PLUGSPart e Body Pkgno. Series Size Material Qty11-320 4000 1/4 Rubber 111-321 4000 3/8 Rubber 111-322 4000, 5000 1/2 Rubber 1

dUST CAPSPart Body Pkgno. Series Size Material Qty11-323 4000 1/4 Rubber 111-324 4000 3/8 Rubber 111-330 4000, 5000 1/2 Rubber 1

pioneer 5000 Series Hydraulic CouplersConnect or disconnect under pressure. Rated pressure 2200 psi. 5000 Series is an economical coupling for applications where uncoupling or recoupling under trapped pressure is a requirement. This is simply accom-plished with ordinary wrenches. No remote valve required.

pioneer 4000 Series Hydraulic CouplersThe 4000 Series (standard to agricultural industry) features precision steel balls and machining to insure a tight metal to metal seal. Critical parts are induction hardened for long life. Buna N body seal. Exceptional dependability for demanding hydraulic applications. The Pioneer 4000 series is interchangeable with most Safeway models. Available in a wide range of sizes from 1/4" to 1".


Part Body Pipe Pressure no. Size Size Material Rating5636 1/4 1/4 NPTF Steel 2000 psi5638 3/8 3/8 NPTF Steel 2500 psi5640 1/2 1/2 NPTF Steel 2500 psi


Part Body Pipe Pressure no. Size Size Material Rating5637 1/4 1/4 NPTF Steel 2000 psi5639 3/8 3/8 NPTF Steel 2500 psi5641 1/2 1/2 NPTF Steel 2500 psi


Part Body Pipe Pressure no. Size Size Material Rating5641 1/2 1/2 NPTF Steel 2200 psi


Part Body Pipe Pressure no. Size Size Material Rating5642 1/2 1/2 NPTF Steel 2200 psi

1/4 Body Size 3/8 Body Size 1/2 Body Size

4000 & 5000 SeRIeS ACTUAL SIZe PROFILe


1/4 Body Size 3/8 Body Size 1/2 Body Size

ACTUAL SIZe PROFILe


Part Body Pipe Pressure no. Size Size Material Rating5649 1/4 1/4 NPTF Steel 5000 psi11-331 3/8 3/8 NPTF Steel 4000 psi5650 1/2 1/2 NPTF Steel 4000 psi


Part Body Pipe Pressure no. Size Size Material Rating5646 1/4 1/4 NPTF Steel 5000 psi11-332 3/8 3/8 NPTF Steel 4000 psi5648 1/2 1/2 NPTF Steel 4000 psi

dUST PLUGSPart Body Pkgno. Series Size Material Qty11-333 6600 1/4 Rubber 111-334 6600 3/8 Rubber 111-335 6600 1/2 Rubber 1

dUST CAPSPart Body Pkgno. Series Size Material Qty11-336 6600 1/4 Rubber 111-337 6600 3/8 Rubber 111-338 6600 1/2 Rubber 1

6600 Series Hydraulic CouplersDouble shutoff desin for use where frequent connections and disconnections are made. Two-way check valves in both coupler and nipple provides instant shut-off when disconnected. Positive valve stop maintains valve alignment and flow checking. Used on dump trucks, snow plows, mining, refuse hauling, truck-trailer connections. The 6600 series is interchangeable Parker 6600, Aeroquip FD56/5600, and ISO series A inter-change couplers.


dUST PLUGSPart Body Pkgno. Series Size Material Qty11-343 3000 3/8 Steel 1

dUST CAPSPart Body Pkgno. Series Size Material Qty11-344 3000 3/8 Steel 1

The thread-together locking system and precision ball type check valves are designed for the high pressures encountered on hydraulic pumps used for equipment such as hydraulic jacks, bearing presses, hose crimp machines. Coupling is accomplished by manually threading together the coupler and nipple halves. The 3000 series interchanges with Parker 3000, Bruning PI 370 and Enerpac C604. Material: steel body, polyure-thane seals.

3000 Series High Pressure Hydraulic Couplers

3000 SeRIeS COUPLeRSMale Pipe Thread. Pkg. Qty. 1 each

Part Body Pipe Ratedno. Size Size Pressure11-341 3/8 3/8-18 MPT 10,000 psi

3000 SeRIeS nIPPLeSFemale Pipe Thread. Pkg. Qty. 1 each

Part Body Pipe Ratedno. Size Size Pressure11-342 3/8 3/8-18 FPT 10,000 psi


BULKHeAd MOUnTInG FLAnGe

For rigid mounting 6100 series couplers. Six 3/16" bolt holes.

Pkg: 1 each

Part Bodyno. Size11-359 3/411-360 1"11-361 1¼

6100 SeRIeS nIPPLeSFemale Pipe Thread. Pkg. Qty. 1 each

MaximumPart Parker Body Pipe Operatingno. no. Size Size Pressure*11-348 6105-12 3/4 3/4 FPT 1750 psi11-349 6105-16 1" 1" FPT 2750 psi11-350 6105-20 1¼ 1¼ FPT 2750 psi

6100 SeRIeS COUPLeRSFemale Pipe Thread. Pkg. Qty. 1 each

MaximumPart Parker Body Pipe Operatingno. no. Size Size Pressure*11-345 6125-12 3/4 3/4 FPT 1750 psi11-346 6125-16 1" 1" FPT 2750 psi11-347 6125-20 1¼ 1¼ FPT 2750 psi

6100 Series "Connect Under Pressure" Couplings

("Thread-to-Connect" Fittings, "Wet-Line" Hydraulic Couplers)Designed for applications where a heavy duty coupling is required that can be connected under pressure with little or no spillage; reducing environmental and worker safety hazard. Low air inclusion during connection maintains systtem performance. Widely used on dump trailer wet-line hydraulic systems and oil field equip-ment. Brass construction with steel valving components and Buna N (nitrile) O-ring seal. The 6100 series interchanges with Aeroquip 5100 series.

6100 SeRIeS BRASS dUST PLUGSPkg. Qty. 1 each

Part Bodyno. Size11-354 3/411-357 1"11-358 1¼

6100 SeRIeS BRASS dUST CAPS

Pkg. Qty. 1 each

Part Bodyno. Size11-351 3/411-352 1"11-353 1¼


Combination Filter-Regulator

T-handle adjustment. Includes 0-160 psi gauge. Clear, polycarbonate bowl. Manual “Push-N-Drain”. Max. operating pressure: 150 psi @125°F.

Part Size Flowno. nPT Style SCFM*12-24201 1/4 Compact 3512-24211 3/8 Compact 4512-24221 1/2 Standard 8012-24231 3/4 Standard 110

Air Line Regulators

Standard has quick response T-handle adjustment. Mini has non-rising locking knob. Includes 0-160 psi gauge. Max. operating pressure: 250 psi. Operating temperature range: -10°F to 175°F.

Part Size Flowno. nPT Style SCFM*12-24444 1/4 Mini 1312-24404 1/4 Compact 5012-24414 3/8 Compact 6512-24424 1/2 Standard 11012-24434 3/4 Standard 130

Standard Mini

Air Line Lubricators

Automatically lubricates air tools for longer life. Can be filled while under pressure. Clear, polycarbonate bowl. Maximum operating pressure: 150 psi @125°F. Operating temperature range: -10°F to 175°F.


Air Line Filters Protects air tools from contamina-tion.40 micron filter element. Clear polycarbonate bowl. Manual “push-n-drain”.Max. operating pressure: 150 psi @125°F. Operating temperature range: -10°F to 175°F.


Also available: Automatic Drain Kits, Replacement Bowls. and Filters. *Standard Cubic Feet Per Minute.

3 in 1 Air Manifold

Accepts three air hoses or quick disconnect couplers. Machined aluminum construction. Supply three air operated tools from a single supply hose. Mount to pipe at workbench or overhead to permit use of air supply by more than one worker. Using different couplers types? Mount three different cou-pler styles on one manifold!

Part no. Inlet/Outlet Size Pkg11-362 1/4 Female NPT 1

Brass In-Line Swivels

For fast and efficient service that avoids hose kinking. For use with air only. Rated to 150 psi.

Part Male Female Pkgno. nPT nPT Qty11-363 1/4 1/4 1


Liquid Filled Pressure Gauges

LonG SERviCE LiFE • STAinLESS STeeL

Glycerin filled gauges dampen vibration and shock,protects components from pressure pulsations, and lubricates components increasing wear life. For use in moderate temperatures. Not for use with oxygen, chlorine, nitric acid, and hydrogen peroxide.

2-1/2" FACe1/4" nPT LOWeR MOUnT

Corrosion resistant stainless steel caseTemperature range: 30°F - 150°F

Part Range Pkgno. (PSI) Qty70-090 0-30 170-091 0-60 170-092 0-100 170-093 0-160 170-094 0-200 170-095 0-300 170-096 0-600 170-081 0-1000 170-082 0-2000 170-083 0-3000 170-084 0-5000 170-085 0-10,000 1

NOTE - liquid filled gauges have an air bubble to allow for liquid expansion where extreme temperature changes may exist.

General Service Pressure Gauges

For general use wherever stem mounting is desirable and the pressure medium is non-corrosive to brass, phosphor bronze or beryllium copper. Air, oil, gas and water services are the most common applications.

2" FACe1/4" nPT LOWeR MOUnT

Steel case

Part Range Pkgno. (PSI) Qty70-004 0-30 170-006 0-60 170-008 0-100 170-010 0-160 170-012 0-200 170-014 0-300 1

2-1/2" FACe1/4" nPT LOWeR MOUnT

Steel case

Part Range Pkgno. (PSI) Qty70-020 0-30 170-022 0-60 170-024 0-100 170-026 0-160 170-028 0-200 170-030 0-300 170-032 0-600 1

2" FACe1/4" nPT BACK MOUnT

Steel case

Part Range Pkgno. (PSI) Qty70-058 0-160 1

Pressure Gauges


For use with low pressure air and water hose. Hose clamp or ferrule required.

Multi-Barb Brass Fittings

ReusableAir Hose Fittings

Large inside diameter gives greater volume of air, hose stays in nut when assembling. Fitting grips hose tighter than crimped fittings. Pkg. Qty. 2 each.

HOSe BARBTube to Male Pipe

Part Hose Pipe Pkgno. I.d. Size Qty27-710 3/16 1/8 1027-711 1/4 1/8 1027-712 1/4 1/4 1027-713 1/4 3/8 1027-714 5/16 1/8 1027-715 5/16 1/4 1027-716 3/8 1/8 527-717 3/8 1/4 527-718 3/8 3/8 527-719 3/8 1/2 527-720 1/2 1/4 527-721 1/2 3/8 527-722 1/2 1/2 527-723 5/8 1/2 527-724 3/4 1/2 527-725 3/4 3/4 5

HOSe BARBTube to Female Pipe

Part Hose Pipe Pkgno. I.d. Size Qty27-731 1/4 1/8 1027-732 1/4 1/4 1027-733 3/8 1/4 527-734 1/2 1/2 5

HOSe MendeR

Part no. Hose I.d. Pkg27-726 3/16 1027-727 1/4 1027-728 5/16 1027-729 3/8 527-730 1/2 5

90° HOSe BARB eLBOW Tube to Male Pipe

Part Hose Pipe Pkgno. I.d. Size Qty27-735 1/4 1/8 1027-736 1/4 1/4 1027-737 3/8 1/4 5

360° BALL SWIVeLS Prevents kinks in hose. Tube to

Male Pipe

Part Hose Pipe Pkgno. I.d. Size Qty27-840 1/4 1/4 127-841 3/8 1/4 1

ReUSABLe MALe COnneCTORThread size 1/4.

Part Hose Hoseno. O.d. I.d.27-821 1/2 1/4 27-822 9/16 1/427-823 5/8 1/427-824 5/8 5/1627-825 5/8 3/827-826 11/16 3/8

ReUSABLe HOSe SPLICeR(Hose Mender)

Part Hose Hoseno. O.d. I.d.27-829 1/2 1/427-830 9/16 1/427-831 5/8 1/427-832 5/8 5/1627-833 5/8 3/8 27-834 11/16 3/8

NOTE: Check Hose O.D. accurately before ordering.

BRASS HOSe FeRRULeS

Lightweight for low pressure air

applications. Pkg. 50 ea.

Part A B C Thick-no. I.d. O.L. end Hole ness27-807• .450 .688 .360 .01613-443 .478 .688 .328 .02427-808• .525 .500 .425 .01627-809• .562 1.00 .438 .02413-444 .593 1.00 .438 .02413-445 .625 1.00 .438 .02427-810• .650 .500 .550 .01913-446 .687 1.00 .500 .02427-811• .718 1.00 .500 .02427-813 .750 1.00 .625 .02427-812• .850 .568 .688 .019

• Items included in hose ferrule kit below

Air Hose Crimper

For low pressure applications. Has 5 dies for 1/4" 1-braid through 3/8" 2 braid low pressure hoses. Dies are self-contained....No separate dies to lose or misplace. Easy one-hand operation gives tremen-dous leverage by positive cam-ming action at end of lever stroke. Part no. 21-369


Universal Beaded Brass Fittings

FOR FUeL LIneS And HeATeR HOSeS

MALe PIPe

Part Hose Pipe Pkgno. I.d. Size Qty27-780 3/16 1/8 1027-781 1/4 1/8 1027-782 1/4 1/4 1027-783 5/16 1/8 1027-784 5/16 1/4 1027-785 3/8 1/8 1027-786 3/8 1/4 1027-787 3/8 3/8 1027-800 1/2 3/8 527-801 5/8 3/8 527-802 5/8 1/2 527-803 3/4 1/2 5

MALe PIPe 90° eLBOW

Part Hose Pipe Pkgno. I.d. Size Qty27-788 1/4 1/8 1027-789 5/16 1/8 1027-790 5/16 1/4 1027-791 3/8 1/8 1027-792 3/8 1/4 1027-804 5/8 3/8 527-805 5/8 1/2 527-806 3/4 1/2 5

POLyeTHyLeneHOSe Tee COnneCTORS

Part Tubing Pkgno. I.d. Qty27-740 1/8 1027-741 5/32 1027-742 3/16 1027-743 1/4 1027-744 5/16 1027-745 3/8 10

Vacuum & Windshield Washer Tubing Connectors

POLyeTHyLene UnIVeRSAL Tee

Part Tubing Pkgno. I.d. Qty27-772 1/8-1/4-3/8 10

VACUUM CAPS

Special heat resistant rubber compound

Part Tube Pkgno. Size Qty27-753 1/8 2527-754 3/16 2527-755 1/4 2527-756 5/16 2527-757 3/8 2527-758 1/2 10

4-WAy nyLOn COnneCTORS

Part Tubing Pkgno. I.d. Qty27-773 3/16 ALL ENDS 10

POLyeTHyLene HOSe COnneCTORS

Part Tubing Pkgno. I.d. Qty27-746 1/8 1027-747 3/16 1027-748 1/4 1027-749 5/16 1027-750 3/8 10

RedUCeRS27-751 1/4 x 3/16 1027-752 3/8 x 1/4 10

POLyeTHyLene UnIVeRSAL COnneCTOR

Part Tubing Pkgno. I.d. Qty27-771 1/8-1/4-3/8 10


VInyL GARden HOSe WASHeRS

Fits standard 3/4" female garden hose fittings. Pkg: 100 each. Part no. 13-434

Water Hose and nozzles

COnTRACTORS WATeR HOSeEPDM rubber tube and cover. Spiral reinforced. Heavy duty crushproof solid brass couplings with wrench grips. Working press. 150PSI. Temp. range: -20°F to 180°F

Part no. Size Pkg17-144 3/4"ID x 50' 1

InSULATed WATeR nOZZLe

Industrial strength, insulated handle. All brass valve stem and adjusting nut. Dial open valve stays adjusts to any pressure. Adjustable spray pattern. Withstands temperatures to 180°F. Part no. 30-274

eCOnOMy WATeR nOZZLe

All zinc metalized body for cold water use. All brass valve stem and ad-justing nut. Hold open clip locks to any spray pattern. Part no. 13-433

Garden Hose Fittings

FeMALe GARden HOSe SWIVeL COnneCTOR

Hose Barb to Female Garden Hose Swivel. Brass.

Part Pkgno. Size Qty13-426 1/2ID x 3/4GHT 613-427 5/8ID x 3/4GHT 613-428 3/4ID x 3/4GHT 6

MALe GARden HOSe COnneCTOR

Hose Barb to Rigid Male Garden Hose. Brass.

Part Pkgno. Size Qty13-429 1/2ID x 3/4GHT 613-430 5/8ID x 3/4GHT 613-431 3/4ID x 3/4GHT 6

SWIVeL FeMALe GARden

HOSe AdAPTeR

Rigid Female Pipe to Female Garden Hose. Brass.

Part Pkgno. Size Qty13-438 1/2NPT x 3/4GHT 613-439 3/4NPT x 3/4GHT 6

MALe GARden HOSe AdAPTeR

Rigid Female Pipe to Male Garden Hose. Brass.

Part Pkgno. Size Qty13-440 1/2NPT x 3/4GHT 613-441 3/4NPT x 3/4GHT 6

BRASS GARden HOSe QUICK COUPLeR

Constructed of corrosion resistant brass and stainless steel. Durable 3-ball locking mechanism and nitrile seats for a secure, leak-free con-nection. Use anywhere hoses are connected frequently. Max. operat-ing pressure: 200 PSI.

#13-442 Complete Set#13-442A Coupler Only#13-442B Nipple Only

RePAIR FITTInGS

Clinch style installs easily with a hammer. Fits 5/8 ID Garden Hose. Brass. Pkg. Qty. 10

eachPart no. Type Size13-435 Female Swivel 5/8ID x 3/4GHT 13-436 Male 5/8ID x 3/4GHT 13-437 Hose Mender 5/8ID x 5/8ID


HOSe endS

Part Pkgno. Size Qty6500 1/2 Hose I.D. 56501 3/4 Hose I.D. 56502 1" Hose I.D. 5

Universal Air Couplings"Quarter-turn" or "Chicago" type fittings

For air service only. Self-mating head design allows each coupling listed to mate with each other. Two lug, mal-leable iron. Rated to 110 PSI. Rubber Seal included. Use of Safety Clip (included) assures proper connection and prevents accidental disconnection.

FeMALe PIPe THReAd endS

Part Pkgno. Size Qty6503 1/2 NPT Female 56504 3/4 NPT Female 56505 1" NPT Female 5

MALe PIPe THReAd endS

Part Pkgno. Size Qty6506 1/2 NPT Male 56507 3/4 NPT Male 56508 1" NPT Male 5

dOUBLe BOLT CLAMPS

Part For Hose O.d.'s Pkgno. Size From: To: Torque* Qty5476 3/8 11/16 7/8 6 55477 1/2 1" 1-3/16 6 55478 3/4 1-1/8 1-5/16 12 55479 7/8 1-5/16 1-1/2 12 55480 1" 1-1/2 1-13/16 21 5

*Recommended torque rated in FT. LBS.

Replacement Seals Fits all 2 lug air couplings.Pkg: 25 each Part no. 6510

Safety ClipsFits all 2 lug air couplings.Pkg: 25 each Part no. 5481

Triple ConnectionFits all 2 lug air couplings.Pkg: 1 each Part no. 6509

Safety Pins.091" diam. for all 2 lug air cou-plings.Pkg: 10 each Part no. 7-2120

Two-Lug Hose endsFor 3/4" id air hose. Can be crimped or swaged-on contractors air hose above. Pkg: 1 each Part no. 8300


Steel Hose Barbs(Combination Nipples , King Nipples)

HOSe nIPPLeSMachined steel, zinc plated. Male N.P.T.

Part Hose Pipe Pkgno. I.d. Thread Qty6511 1/4 1/8 NPT 106512 1/4 1/4 NPT 106513 3/8 1/4 NPT 106514 3/8 3/8 NPT 106515 1/2 3/8 NPT 56516 1/2 1/2 NPT 56517 3/4 1/2 NPT 56518 3/4 3/4 NPT 5

HOSe nIPPLeS Forged steel. Zinc plated. Male NPT

Part Hose Pipe Pkgno. I.d. Thread Qty6519 1" 1" 26520 1-1/4 1-1/4 26521 1-1/2 1-1/2 26522 2" 2" 26523 2-1/2 2-1/2 26524 3" 3" 2

HOSe MendeRS Forged steel. Zinc plated

Part Hose Pkgno. I.d. Qty6525 1/4 106526 3/8 106527 1/2 56528 3/4 56529 1" 26530 1-1/4 26531 1-1/2 26532 2" 26533 2-1/2 26534 3" 2

FeMALe SWIVeLPart Hose Tube Thread Pkgno. I.d. O.d. Size Qty

dUAL SeAT - 37° & 45° FLARe4908 1/4 1/4 7/16-20 54909 1/4 5/16 1/2-20 54910 3/8 1/2 3/4-16 54911 1/2 1/2 3/4-16 54912 1/2 5/8 7/8-14 54913 5/8 5/8 7/8-14 5

45° FLARe4914 3/8 3/8 5/8-18 5

37° FLARe 4916 3/8 3/8 9/16-18 5

RIGId MALe nPTFPart Hose Pipe Pkgno. I.d. Thread Qty4900 1/4 1/8-27 54901 1/4 1/4-18 513-447 3/8 1/8-27 54902 3/8 1/4-18 54903 3/8 3/8-18 54904 1/2 3/8-18 54905 1/2 1/2-14 54906 5/8 1/2-14 54907 3/4 3/4-14 5

Push-On CouplingsReusable brass couplings for use with "push-on" hose.

No clamps required.

SAe 45° MALe FLARe (RIGId)

Part Hose Tube Thread Pkgno. I.d. O.d. Size Qty4918 1/4 1/4 7/16-20 54920 1/4 5/16 1/2-20 54922 3/8 3/8 5/8-18 54923 1/2 1/2 3/4-16 5

SWIVeL MALe InVeRTed FLARe

Part Hose Tube Thread Pkgno. I.d. O.d. Size Qty4924 1/4 3/16 3/8-24 54925 1/4 1/4 7/16-24 54926 1/4 5/16 1/2-20 54927 3/8 3/8 5/8-18 54928 1/2 1/2 3/4-18 5

HOSe MendeR (UnIOn)Part Hose Pkgno. I.d. Qty4938 1/4 104939 3/8 104940 1/2 54941 5/8 5

360° BALL SWIVeL - MALe nPTF

Part Hose Male Pkgno. I.d. Pipe Qty4942 1/4" 1/4" 14943 3/8" 1/4" 1


All fittings on this page for use with SAE 100R5 Medium Pressure Hose.

FeMALe SAe 45° SWIVeLReUSABLe COUPLInG

Part Hose Tube Thread Pkgno. I.d. O.d. Size Qty4985 3/16 (-4) 1/4 (-4) 7/16-20 54986 1/4 (-5) 5/16 (-5) 1/2-20 54987 5/16 (-6) 3/8 (-6) 5/8-18 54988 13/32 (-8) 1/2 (-8) 3/4-16 54989 1/2 (-10) 5/8 (-10) 7/8-14 54990 5/8 (-12) 3/4 (-12) 1-1/16-14 3

FeMALe JIC 37° SWIVeL ReUSABLe COUPLInGS


RIGId MALe nPTFReUSABLe COUPLInGS

Part Hose Pipe Pkgno. I.d. Thread Qty4960 3/16 (-4) 1/8-27 (-2) 54961 3/16 (-4) 1/4-18 (-4) 54962 1/4 (-5) 1/4-18 (-4) 54963 5/16 (-6) 1/4-18 (-4) 54964 5/16 (-6) 3/8-18 (-6) 54965 13/32 (-8) 3/8-18 (-6) 54966 13/32 (-8) 1/2-14 (-8) 54967 1/2 (-10) 1/2-14 (-8) 54970 5/8 (-12) 3/4-14 (-12) 3

RIGId MALe 37° FLAReReUSABLe COUPLInGS


90° BenT TUBe FeMALe SWIVeLReUSABLe COUPLInGS

37° Flare

Part Hose Tube Thread Pkgno. I.d. O.d. Size Qty5009 3/16 1/4 7/16-20 55010 1/4 5/16 1/2-20 55011 5/16 3/8 5/8-18* 55012 5/16 3/8 9/16-18 55013 13/32 1/2 3/4-16 35014 1/2 5/8 7/8-14 35015 5/8 3/4 1-1/16-14* 25016 5/8 3/4 1-1/16-12 2

*SAE 45° Flare

SAe InVeRTed MALe SWIVeLReUSABLe COUPLInGS

Part Hose Tube Thread Pkgno. I.d. O.d. Size Qty5028 3/16 1/4 7/16-24 45029 1/4 5/16 1/2-20 25030 5/16 3/8 5/8-18 25031 13/32 1/2 3/4-18 2

SAe InVeRTed MALe SWIVeL 90° eLBOW

ReUSABLe COUPLInGS

Part Hose Tube Thread Pkgno. I.d. O.d. Size Qty5034 1/4 5/16 1/2-20 25035 5/16 3/8 5/8-18 25037 13/32 3/8 5/8-18 2


FeMALe SWIVeL 37° FLAReReUSABLe COUPLInGS

Part Hose Tube Thread Pkgno. I.d. O.d. Size Qty5118 1/4 (-4) 1/4 (-4) 7/16-20 55119 1/4 (-4) 5/16 (-5) 1/2-20 55120 1/4 (-4) 3/8 (-6) 9/16-18 55121 3/8 (-6) 3/8 (-6) 9/16-18 55122 3/8 (-6) 1/2 (-8) 3/4-16 55123 1/2 (-8) 1/2 (-8) 3/4-16 55124 1/2 (-8) 5/8 (-10) 7/8-14 55125 1/2 (-8) 3/4 (-12) 1-1/16-12 55126 3/4 (-12) 5/8 (-10) 7/8-14 35127 3/4 (-12) 3/4 (-12) 1-1/16-.12 35128 1" 1" 1-5/16-12 2

Use with SAE 100R2 Type AT Thin Cover High Pressure Hose.

dayco Hy Series Crimp Fittings

Swage-Crimp field attachable hose ends. For use with these hose styles;

SAE 100R1 Type AT SAE 100R2 Type AT SAE 30R1 SAE 30R2, Type 1, 2, or 3 SAE 30R4, Type 2

All Pkg. Qty. 1 each

SAe 45° FLARe FeMALe SWIVeL HOSe end

Part dayco Hose Threadno. no. I.d. Size6544 HY06-06FA 3/8 (-6) 5/8-18 (-6) 6581 HY12-12FA 3/4 (-12) 1-1/16-14 (-12)

JIC 37° FLARe FeMALe SWIVeL HOSe end

Part dayco Hose Threadno. no. I.d. Size6535• HY04-04FJ 1/4 (-4) 7/16-20 (-4) 6536• HY04-05FJ 1/4 (-4) 1/2-20 (-5) 6537 HY04-06FJ 1/4 (-4) 9/16-18 (-6) 6546 HY06-06FJ 3/8 (-6) 9/16-18 (-6) 6547• HY06-08FJ 3/8 (-6) 3/4-16 (-8) 6563• HY08-08FJ 1/2 (-8) 3/4-16 (-8) 6564• HY08-10FJ 1/2 (-8) 7/8-14 (-10) 6565 HY08-12FJ 1/2 (-8) 1-1/16-12 (-12) 6579 HY10-12FJ 5/8 (-10) 1-1/16-12 (-12) 6582• HY12-10FJ 3/4 (-12) 7/8-14 (-10) 6583 HY12-12FJ 3/4 (-12) 1-1/16-12 (-12) 6584 HY12-14FJ 3/4 (-12) 1-3/16-12 (14) 6585 HY12-16FJ 3/4 (-12) 1-5/16-12 (-16) 6592 HY16-16FJ 1" (-16) 1-5/16-12 (-16)

• Swivel nuts will connect to either 37° (JIC) or 45° (SAE) flared male fittings

RIGId MALe nPTFReUSABLe COUPLInGS

Part Hose Pipe Pkgno. I.d. Thread Qty5102 1/4 (-4) 1/8-27 (-2) 55103 1/4 (-4) 1/4-18 (-4) 55105 3/8 (-6) 1/4-18 (-4) 55106 3/8 (-6) 3/8-18 (-6) 55108 1/2 (-8) 3/8-18 (-6) 55109 1/2 (-8) 1/2-14 (-8) 55110 1/2 (-8) 3/4-14 (-12) 35111 3/4 (-12) 3/4-14 (-12) 35112 1" (-16) 3/4-14 (-12) 25113 1" (-16) 1-11½ (-16) 2

RIGId MALe JIC 37° FLAReHOSe end

Part dayco Hose Threadno. no. I.d. Size6551 HY06-06MJ 3/8 (-6) 9/16-18 (-6) 6569 HY08-08MJ 1/2 (-8) 3/4-16 (-8) 6570 HY08-10MJ 1/2 (-8) 7/8-14 (-10) 6580 HY10-10MJ 5/8 (-10) 7/8-14 (-10)


MALe SWIVeL nPTFHOSe end

Hose End swivels for the ease of installation and allows for very minor movement under pressure. NOT fOr eXTeNSIVe SWIVeLINg.

Part dayco Hose Pipeno. no. I.d. Size 6539 HY04-04SP 1/4 (-4) 1/4-18 (-4)

6549 HY06-04SP 3/8 (-6) 1/4-18 (-4) 6550 HY06-06SP 3/8 (-6) 3/8-18 (-6) 6568 HY08-08SP 1/2 (-8) 1/2-14 (-8)

6587 HY12-12SP 3/4 (-12) 3/4-14 (-12)

6593 HY16-16SP 1" (-16) 1-11½ (-16)

dayco Hy Series Crimp FittingsRIGId MALe nPTF

HOSe endHose End does not swivel

Part dayco Hose Pipeno. no. I.d. Size6540 HY04-02MP 1/4 (-4) 1/8-27 (-2)

6541 HY04-04MP 1/4 (-4) 1/4-18 (-4)

6552 HY06-04MP 3/8 (-6) 1/4-18 (-4) 6553 HY06-06MP 3/8 (-6) 3/8-18 (-6)

6595 HY06-08MP 3/8 (-6) 1/2 (-8) 6571 HY08-06MP 1/2 (-8) 3/8-18 (-6) 6572 HY08-08MP 1/2 (-8) 1/2-14 (-8)

6573 HY08-12MP 1/2 (-8) 3/4-14 (-12)

6588 HY12-08MP 3/4 (-12) 1/2-14 (-8)

6589 HY12-12MP 3/4 (-12) 3/4-14 (-12)

6594 HY16-16MP 1" (-16) 1-11½ (-16)

MALe SWIVeL O-RInG BOSSHOSe end

Swivel fitting allows for very minor movement under pressure. NOT FOR EXTENSIVE SWIVELING.

Part dayco Hose Threadno. no. I.d. Size6576 HY08-08RC 1/2 (-8) 3/4-16 (-8)

RIGId MALe O-RInG BOSSHOSe end

Part dayco Hose Threadno. no. I.d. Size6554 HY06-06RA 3/8 (-6) 9/16-18 (-6)

6574 HY08-08RA 1/2 (-8) 3/4-16 (-8)

6575 HYO8-10RA 1/2 (-8) 7/8-14 (-10)

FLAReLeSS COMPReSSIOnHOSe end

Repair straight or bent tubing on hose assemblies or power steering lines

Part dayco Hose Tubingno. no. I.d. Size6538 HY04-04MV 1/4 (-4) 1/4 (-4)

8301 HY04-06MV 1/4 (-4) 3/8 (-6)

8302 HY06-05MV 3/8 (-6) 5/16 (-5) 6548 HY06-06MV 3/8 (-6) 3/8 (-6) 8303 HY06-08MV 3/8 (-6) 1/2 (-8) 6566 HY08-08MV 1/2 (-8) 1/2 (-8) 6567 HY08-10MV 1/2 (-8) 5/8 (-10) 6586 HY12-12MV 3/4 (-12) 3/4 (-12)

STRAIGHT TUBe MALe SWIVeL 45° InVeRTed FLARe HOSe end

Part dayco Hose Threadno. no. I.d. Size6542 HY04-04MF 1/4 (-4) 7/16-24 (-4)

6557 HY06-06MF 3/8 (-6) 5/8-18 (-6)

45° BenT TUBe MALe SWIVeL 45° InVeRTed FLARe HOSe end

Part dayco Hose Threadno. no. I.d. Size6555 HY06-MF45T 3/8 (-6) 5/8-18 (-6)


Part dayco Hose Threadno. no. I.d. Size6556 HYO6-06MF90T 3/8 (-6) 5/8-18 (-6)


dayco Hy Series Crimp Fittings

45° BenT TUBe FeMALe SWIVeL 37° FLARe HOSe end

Part dayco Hose Threadno. no. I.d. Size6543 HY04-04FJ45T 1/4 (-4) 7/16-20 (-4)

6558 HY06-06FJ45T 3/8 (-6) 9/16-18 (-6)

6560 HY06-08FJ45T 3/8 (-6) 3/4-16 (-8)

6577 HY08-08FJ45T 1/2 (-8) 3/4-16 (-8)

6590 HY12-12FJ45T 3/4 (-12) 1-1/16-12 (-12)

90° BenT TUBe FeMALe SWIVeL 37° FLARe HOSe end

Part dayco Hose Threadno. no. I.d. Size6559 6RJ9-6SB 3/8 (-6) 9/16-18 (-6)

6561 8RJ9-6SB 3/8 (-6) 3/4-16 (-8)

6578 8RJ9-8SB 1/2 (-8) 3/4-16 (-8)

6591 12RJ9-12SB 3/4 (-12) 1-1/16-12 (-12)

MALe nPTF PIPe SWIVeL*HOSe endS

*swivel fitting allows minor movement under pressure but is not for extensive swiveling.

Part Parker Pipe Hoseno. no. Size Size8223 11343-4-4 1/4-18(-4) 1/4(-4)

8224 11343-4-6 1/4-18(-4) 3/8(-6)

8225 11343-6-6 3/8-18(-6) 3/8(-6)

8226 11343-8-8 1/2-14(-8) 1/2(-8)

8227 11343-12-12 3/4-14(-12) 3/4(-12)

8228 11343-16-16 1-11½(-16) 1"(-16)

MALe nPTF PIPe - RIGIdHOSe endS


8200 10143-4-4 1/4-18(-4) 1/4(-4)

8217 10143-4-6 1/4-18(-4) 3/8(-6)

8201 10143-6-6 3/8-18(-6) 3/8(-6)

8218 10143-6-8 3/8-18(-6) 1/2(-8)

8202 10143-8-8 1/2-14(-8) 1/2(-8)

8219 10143-12-8 3/4-14(-12) 1/2(-8)

8220 10143-6-10 3/8-18(-6) 5/8(-10)

8221 10143-12-10 3/4-14(-12) 5/8(-10)

8203 10143-12-12 3/4-14(-12) 3/4(-12)

8222 10143-12-16 3/4-14(-12) 1"(-16)

8204 10143-16-16 1-11½(-16) 1"(-16)

8214 10143-20-20 1-1/4-11½ (-20) 1-1/4(-20)

Swage-Crimp field attachable hose ends.For use with these hose styles;

SAE 100R1 Type ATSAE 100R2 Type AT

SAE 100R3SAE 100R4

SAE 100R9 Type AT All Pkg. Qty. 1 each

Parker 43 SeriesCrimp Fittings


Parker 43 Series Crimp Fittings

STRAIGHT SAe THReAd O-RInG RIGId HOSe end

Part Parker Thread Hoseno. no. Size Size8236 10543-6-4 9/16-18(-6) 1/4(-4)

8210 10543-6-6 9/16-18(-6) 3/8(6-)

8237 10543-8-6 3/4-16(-8) 3/8(-6)

8211 10543-8-8 3/4-16(-12) 1/2(-8)

8212 10543-10-8 7/8-14(-10) 1/2(-8)

MALe nPTF PIPe 90° eLBOW - SWIVeL HOSe end

Swivel fitting allows minor movement under pressure but is not for extensive swiveling.

Part Parker Pipe Hoseno. no. Size Size8229 11L43-4-4 1/4-18(-4) 1/4(-4)

8230 11L43-6-6 3/8-18(-6) 3/8(-6)

8231 11L43-8-8 1/2-14(-8) 1/2(-8)

FeMALe nPTF PIPe RIGId HOSe end


8233 10243-6-6 3/8-18(-6) 3/8(-6)

8234 10243-8-8 1/2-14(-8) 1/2(-8)

8235 10243-12-12 3/4-14(-12) 3/4(-12)

STRAIGHT SAe THReAd O-RInG SWIVeL* HOSe end

Part Parker Thread Hoseno. no. Size Size8238 10G43-6-6 9/16-18(-6) 3/8(-6)

8239 10G43-8-6 3/4-16(-8) 3/8(-6)

8240 10G43-8-8 3/4-16(-8) 1/2(-8)

STRAIGHT SAe THReAd O-RInG 90° eLBOW SWIVeL* HOSe end

Part Parker Thread Hoseno. no. Size Size8286 10L43-8-6 3/4-16(-8) 3/8(-6)

8287 10L43-8-8 3/4-16(-8) 1/2(-8)

*Swivel fitting allows minor movement under pressure but is not for extensive swiveling.

MALe JIC 37° HOSe end

Part Parker Tube Thread Hoseno. no. Size Size Size 8248 10343-4-4 1/4(-4) 7/16-20 1/4(-4)

8249 10343-6-4 3/8(-6) 9/16-18 1/4(-4)

8250 10343-6-6 3/8(-6) 9/16-18 3/8(-6)

8251 10343-8-8 1/2(-8) 3/4-16 1/2(-8)

8252 10343-10-8 5/8(-10) 7/8-14 1/2(-8)

8253 10343-10-10 5/8(-10) 7/8-14 5/8(-10)

8254 10343-12-12 3/4(-12) 1-1/16-12 3/4(-12)

8288 10343-16-16 1"(-16) 1-5/16-12 1(-16)

8289 10343-20-20 1-1/4(-20) 1-5/8-12 1-1/4(-20)

FeMALe SAe 45° SWIVeL HOSe end


8263 10843-12-12 3/4(-12) 1-1/16-14 3/4(-12)


FeMALe JIC 37° SWIVeL 45° eLBOW HOSe end


8265 13743-6-6 3/8(-6) 9/16-18 3/8(-6)

8266 13743-8-6 1/2(-8) 3/4-16 3/8(-6)

8267 13743-8-8 1/2(-8) 3/4-16 1/2(-8)


FeMALe JIC 37° SWIVeL 90° eLBOW HOSe end


8270 13943-6-6 3/8(-6) 9/16-18 3/8(-6)

8271 13943-8-6 1/2(-8) 3/4-16 3/8(-6)

8272 13943-8-8 1/2(-8) 3/4-16 1/2(-8)

8273 13943-12-12 3/4(-12) 1-1/16-12 3/4(-12)

8274 13943-16-16 1"(-16) 1-5/16-12 1"(-16)

FeRRULe FIx SAe FLAReLeSSHOSe end

Fast Repair For Ruptured “Straight of Bent Tube” Hose Assemblies & Power Steering Lines.

Part Parker Tube Hoseno. no. Size Size 8281 11143-4-4 1/4(-4) 1/4(-6)

8282 11143-6-6 3/8(-6) 3/8(-6)

8283 11143-8-8 1/2(-8) 1/2(-8)

8284 11143-10-8 5/8(-10) 1/2(-8)

8285 11143-12-12 3/4(-12) 3/4(-12)

FeMALe JIC 37° SWIVeL HOSe end

Part Parker Tube Thread Hoseno. no. Size Size Size8205• 10643-4-4 1/4(-4) 7/16-20 1/4(-4)

8255• 10643-5-4 5/16(-5) 1/2-20 1/4(-4)

8256 10643-6-4 3/8(-6) 9/16-18 1/4(-4)

8206 10643-6-6 3/8(-6) 9/16-18 3/8(-6)

8257• 10643-8-6 1/2(-8) 3/4-16 3/8(-6)

8207• 10643-8-8 1/2(-8) 3/4-16 1/2(-8)

8258• 10643-10-8 5/8(-10) 7/8-14 1/2(-8)

8259 10643-12-10 3/4(-12) 1-1/16-12 5/8(-10)

8260• 10643-10-12 5/8(-10) 7/8-14 3/4(-12)

8208 10643-12-12 3/4(-12) 1-1/16-12 3/4(-12)

8261• 10643-14-12 7/8(-14) 1-3/16-12 3/4(-12)

8262• 10643-16-12 1"(-16) 1-5/16-12 3/4(-12)

8209• 10643-16-16 1"(-16) 1-5/16-12 1"(-16)

8215• 10643-20-20 1-1/4(-20) 1-5/8-12 1-1/4(-20)

• Swivel nuts will connect to either 37° (JIC) or 45° (SAE) flared male fittings

STRAIGHT TUBe MALe SWIVeL45° InVeRTed FLARe HOSe end


8276 12843-6-6 3/8(-6) 5/8-18 3/8(-6)


Part Parker Tube Thread Hoseno. no. Size Size Size8277 16743-4-4 1/4(-4) 7/16-24 1/4(-4)

8278 16743-6-6 3/8(-6) 5/8-18 3/8(-6)



8280 16943-6-6 3/8(-6) 5/8-18 3/8(-6)



COMPLeTe ASSORTMenT27 SIzES, 1/4", 3/8", 1/2", 3/4" AND 1" O.D. HOSE ENDS

ELBOWS AND SWIVEL ADAPTERS INA STEEL 40-HOLE BIN. PART nO. 40-105

eCOnOMy ASSORTMenT20 SIzES, 1/4", 3/8" AND 1/2" O.D. HOSE ENDS

ELBOWS AND SWIVEL ADAPTERS INA STEEL 40-HOLE BIN. PART nO. 40-106

PARKeR HOSe FITTInG ASSORTMenTS

MALe “SeAL LOK” - STRAIGHT HOSe endO-Ring Face Seal

Part Parker Tube Thread Hoseno. no. Size Size Size 8290 1JM43-6-6 3/8(-6) 11/16-16 3/8(-6)

8291 1JM43-8-8 1/2(-8) 13/16-16 1/2(-8)

FeMALe “SeAL-LOK” SWIVeL* STRAIGHT HOSe end

Part Parker Tube Thread Hoseno. no. Size Size Size8292 1JC43-6-6 3/8(-6) 11/16-16 3/8(-6)

8293 1JC43-8-8 1/2(-8) 13/16-16 1/2(-8)

FeMALe “SeAL-LOK” SWIVeL*45° eLBOW HOSe end

Part Parker Tube Thread Hoseno. no. Size Size Size 8294 1J743-6-6 3/8(-6) 11/16-16 3/8(-6)

8295 1J743-8-8 1/2(-8) 13/16-16 1/2(-8)

*FEMALE SWIVEL NUT TORQUE (non-lubricated) 3/8 tube size; 24-30 ft lbs., 1/2 tube size; 34-42 ft lbs.

Two-Lug Quarter Turn Hose Ends designed for use with 3/4" i.d. contractor air hose (#4790). Also called "Crowfoot" fittings.

Part dixon Hose Pkgno. no. I.d. Qty 8300 AM6WF 3/4"(-12) 1

*NOTE - this is not a Parker item. Parker Parkrimp system users should contact our hose crimping department for more information on crimping this fitting with a Parker hose crimp machine.

Quarter Turn Crimp Fittings


MALe “SeAL-LOK” TO MALe PIPe STRAIGHT AdAPTeR

O-Ring Face Seal

Part Parker Tube Thread Pipe Pkgno. no. Size Size Size Qty8296 6-6FLO-S 3/8(-6) 11/16-16 3/8-18(-6) 58297 8-8FLO-S 1/2(-8) 13/16-16 1/2-14(-8) 5

AdaptersMaterial: zinc Plated Steel

WeATHeRHeAd SeRIeS C5205dAyCO SeRIeS 2404



STRAIGHT AdAPTeRJIC 37° MALe FLARe TO MALe PIPe

Part Pipe Tube Thread Pkgno. Thread O.d. Size Qty5200 1/8-27(-2) 1/4(-4) 7/16-20 55201 1/8-27(-2) 5/16(-5) 1/2-20 55202 1/8-27(-2) 3/8(-6) 9/16-18 55203 1/4-18(-4) 1/4(-4) 7/16-20 55204 1/4-18(-4) 5/16(-5) 1/2-20 55205 1/4-18(-4) 3/8(-6) 9/16-18 55206 3/8-18(-6) 1/4(-4) 7/16-20 55207 3/8-18(-6) 5/16(-5) 1/2-20 55208 3/8-18(-6) 3/8(-6) 9/16-18 55209 3/8-18(-6) 1/2(-8) 3/4-16 55210 1/2-14(-8) 3/8(-6) 9/16-18 55211 1/2-14(-8) 1/2(-8) 3/4-16 55212 1/2-14(-8) 5/8(-10) 7/8-12 55213 1/2-14(-8) 3/4(-12) 1-1/16-12 25214 3/4-14(-12) 1/2(-8) 3/4-16 25215 3/4-14(-12) 5/8(-10) 7/8-14 25216 3/4-14(-12) 3/4(-12) 1-1/16-12 25217 3/4-14(-12) 1"(-16) 1-5/16-12 25218 1-11½(-16) 3/4(-12) 1-1/16-12 25219 1-11½(-16) 1"(-16) 1-5/16-12 25220 1-1/4-11½(-20) 1-1/4(-20) 1-5/8-12 15221 1-1/2-11½(-20) 1-1/2(-24) 1-7/8-12 15222 2-11½(-32) 2"(-32) 2-1/2-12 1

45° eLBOWJIC 37° MALe FLARe TO MALe PIPe

Part Pipe Tube Thread Pkgno. Thread O.d. Size Qty5236 1/8-27(-2) 1/4(-4) 7/16-20 55237 1/4-18(-4) 1/4(-4) 7/16-20 55238 1/4-18(-4) 3/8(-6) 9/16-18 55239 3/8-18(-6) 3/8(-6) 9/16-18 55240 3/8-18(-6) 1/2(-8) 3/4-16 25241 1/2-14(-8) 3/8(-6) 9/16-18 25242 1/2-14(-8) 1/2(-8) 3/4-16 25243 1/2-14(-8) 5/8(-10) 7/8-14 25244 3/4-14(-12) 5/8(-10) 7/8-14 25245 3/4-14(-12) 3/4(-12) 1-1/16-12 25246 1-11½(-16) 1"(-16) 1-5/16-12 2

90° eLBOWJIC 37° MALe FLARe TO MALe PIPe

Part Pipe Tube Thread Pkgno. Thread O.d. Size Qty5247 1/8-27(-2) 1/4(-4) 7/16-20 55248 1/4-18(-4) 1/4(-4) 7/16-20 55249 1/4-18(-4) 3/8(-6) 9/16-18 55250 3/8-18(-6) 3/8(-6) 9/16-18 55251 3/8-18(-6) 1/2(-8) 3/4-16 25252 1/2-14(-8) 3/8(-6) 9/16-18 25253 1/2-14(-8) 1/2(-8) 3/4-16 25254 1/2-14(-8) 5/8(-10) 7/8-14 25255 3/4-14(-12) 5/8(-10) 7/8-14 25256 3/4-14(-12) 3/4(-12) 1-1/16-12 25257 1-11½(-16) 1"(-16) 1-5/16-12 2






WeATHeRHeAd SeRIeS C5129dAyCO SeRIeS 304C

STRAIGHT AdAPTeRJIC 37° MALe FLARe TO FeMALe PIPe

Part Pipe Tube Thread Pkgno. Thread O.d. Size Qty5223 1/8-27(-2) 1/4(-4) 7/16-20 55224 1/4-18(-4) 1/4(-4) 7/16-20 55225 1/4-18(-4) 3/8(-6) 9/16-18 55226 3/8-18(-6) 3/8(-6) 9/16-18 55227 3/8-18(-6) 1/2(-8) 3/4-16 55228 1/2-14(-8) 3/8(-6) 9/16-18 25229 1/2-14(-8) 1/2(-8) 3/4-16 25230 1/2-14(-8) 5/8(-10) 7/8-14 25231 1/2-14(-8) 3/4(-12) 1-1/16-12 25232 3/4-14(-12) 1/2(-8) 3/4-16 25233 3/4-14(-12) 5/8(-10) 7/8-14 25234 3/4-14(-12) 3/4(-12) 1-1/16-12 25235 1-11½(-16) 1"(-16) 1-5/16-12 2

JIC 37° MALe FLARe UnIOn

Part Tube Thread Pkgno. O.d. Size Qty5258 1/4(-4) 7/16-20 105259 3/8(-6) 9/16-18 105260 1/2(-8) 3/4-16 55261 5/8(-10) 7/8-14 55262 3/4(-12) 1-1/16-12 25263 1"(-16) 1-5/16-12 2

JIC 37° FLARe CAP

Part Tube Thread Pkgno. O.d. Size Qty5364 1/4(-4) 7/16-20 55365 5/16(-5) 1/2-20 55366 3/8(-6) 9/16-18 55367 1/2(-8) 3/4-16 55368 5/8(-10) 7/8-14 55369 3/4(-12) 1-1/16-12 55370 7/8(-14) 1-3/16-12 25371 1"(-16) 1-5/16-12 2

JIC 37° MALe FLARe PLUG

Part Tube Thread Pkgno. O.d. Size Qty5356 1/4(-8) 7/16-20 55357 5/16(-5) 1/2-20 55358 3/8(-6) 9/16-18 55359 1/2(-8) 3/4-16 55360 5/8(-10) 7/8-14 55361 3/4(-12) 1-1/16-12 55362 7/8(-14) 1-3/16-12 25363 1"(-16) 1-5/16-12 2

JIC 37° FLARe - MALe TO FeMALeSWIVeL 90° eLBOW

Part Tube Thread Pkgno. O.d. Size Qty5386 1/4(-4) 7/16-20 55387 3/8(-6) 9/16-18 55388 1/2(-8) 3/4-16 25389 5/8(-10) 7/8-14 25390 3/4(-12) 1-1/16-12 2WeATHeRHeAd SeRIeS C5506dAyCO SeRIeS 6500

JIC 37° FLARe - MALe TO FeMALeRIGId FLARe RedUCeR

M A L e F e M A L ePart Thrd. Tube Thread Tube Pkgno. Size O.d. Size O.d. Qty13-449 9/16-18 3/8 (-6) 7/16-20 1/4 (-4) 513-450 3/4-16 1/2 (-8) 7/16-20 1/4 (-4) 513-451 3/4-16 1/2 (-8) 9/16-18 3/8 (-6) 513-452 7/8-14 5/8 (-10) 9/16-18 3/8 (-6) 213-453 7/8-14 5/8 (-10) 3/4-16 1/2 (-8) 213-454 1-1/16-12 3/4 (-12) 3/4-16 1/2 (-8) 2dAyCO SeRIeS 2406





TUBInG SLeeVe

Part Tube Pkgno. O.d. Qty5379 1/4(-4) 105380 5/16(-5) 105381 3/8(-6) 105382 1/2(-8) 105383 5/8(-10) 55384 3/4(-12) 55385 1"(-16) 5

TUBInG nUT

Part Tube Thread Pkgno. O.d. Size Qty5372 1/4(-4) 7/16-20 105373 5/16(-6) 1/2-20 105374 3/8(-6) 9/16-18 105375 1/2(-8) 3/4-16 105376 5/8(-10) 7/8-14 55377 3/4(-12) 1-1/16-12 55378 1"(-16) 1-5/16-12 5

UnIOn TeeJIC 37° MALe FLARe

Part Tube Thread Pkgno. O.d. Size Qty13-455 1/4 (-4) 7/16-20 213-456 5/16 (-5) 1/2-20 213-457 3/8 (-6) 9/16-18 213-458 1/2 (-8) 3/4-16 2

BRAnCH TeeJIC 37° MALe FLARe TO MALe PIPe

Part Tube Straight Female Pkgno. O.d. O-Ring Pipe Qty13-459 1/4(-4) 7/16-20 1/8-27(-2) 213-460 1/4(-4) 7/16-20 1/4-18(-4) 213-461 5/16(-5) 1/2-20 1/8-27(-2) 213-462 5/16(-5) 1/2-20 1/4-18(-4) 213-463 3/8(-6) 9/16-18 1/4-18(-4) 213-464 3/8(-6) 9/16-18 3/8-18(-6) 213-465 1/2(-8) 3/4-16 3/8-18(-6) 213-466 1/2(-8) 3/4-16 1/2-14(-8) 2

MALe RUn TeeJIC 37° MALe FLARe TO MALe PIPe

Part Tube Straight Female Pkgno. O.d. O-Ring Pipe Qty13-467 1/4(-4) 7/16-20 1/8-27(-2) 213-468 1/4(-4) 7/16-20 1/4-18(-4) 213-469 5/16(-5) 1/2-20 1/8-27(-2) 213-470 3/8(-6) 9/16-18 1/4-18(-4) 213-471 3/8(-6) 9/16-18 3/8-18(-6) 213-472 1/2(-8) 3/4-16 3/8-18(-6) 213-473 1/2(-8) 3/4-16 1/2-14(-8) 2

dAyCO SeRIeS 2603

dAyCO SeRIeS 2601

dAyCO SeRIeS 2605



*O-Ring Boss Thread

PLUG ORB*

Part O-Ring Pkgno. Thread Qty4863 7/16-20(-4) 54864 1/2-20(-5) 54865 9/16-18(-6) 54866 3/4-16(-8) 54867 7/8-14(-10) 24868 1-1/16-12(-12) 24869 1-5/16-12(-16) 2

T1

T2

90° AdJUSTABLe eLBOW ORB* TO 37° FLARe

Tube O-RingPart Tube Thread Thread Pkgno. O.d. T1 T2 Qty4857 1/4 7/16-20(-4) 7/16-20(-4) 513-474 1/4 7/16-20(-4) 1/2-20(-5) 513-475 1/4 7/16-20(-4) 9/16-18(-6) 513-476 1/4 7/16-20(-4) 3/4-16(-8) 513-477 5/16 1/2-20(-5) 7/16-20(-4) 513-478 5/16 1/2-20(-5) 1/2-20(-5) 513-479 5/16 1/2-20(-5) 9/16-18(-6) 513-480 3/8 9/16-18(-6) 7/16-20(-4) 513-481 3/8 9/16-18(-6) 1/2-20(-5) 24858 3/8 9/16-18(-6) 9/16-18(-6) 213-482 3/8 9/16-18(-6) 3/4-16(-8) 213-483 3/8 9/16-18(-6) 7/8-14(-10) 213-484 1/2 3/4-16(-8) 9/16-18(-6) 24859 1/2 3/4-16(-8) 3/4-16(-8) 213-485 1/2 3/4-16(-8) 7/8-14(-10) 213-486 1/2 3/4-16(-8) 1-1/16-12(-12) 213-487 5/8 7/8-14(-10) 3/4-16(-8) 24860 5/8 7/8-14(-10) 7/8-14(-10) 213-488 5/8 7/8-14(-10) 1-1/16-12(-12) 213-489 3/4 1-1/16-12(-12) 7/8-14(-10) 14861 3/4 1-1/16-12(-12) 1-1/16-12(-12) 14862 1" 1-5/16-12(-16) 1-5/16-12(-16) 1

WeATHeRHeAd SeRIeS 5315dAyCO SeRIeS 6400



MALe ORB* COnneCTOR TO 37° FLARe

Part Tube Thread O-Ring Pkgno. O.d. Size Thread Qty4840 1/4(-4) 7/16-20 7/16-20(-4) 54841 1/4(-4) 7/16-20 1/2-20(-5) 54842 5/16(-5) 1/2-20 1/2-20(-5) 54843 3/8(-6) 9/16-18 9/16-18(-6) 54844 3/8(-6) 9/16-18 3/4-16(-8) 54845 1/2(-8) 3/4-16 3/4-16(-8) 54846 1/2(-8) 3/4-16 9/16-18(-6) 54847 1/2(-8) 3/4-16 7/8-14(-10) 54848 1/2(-8) 3/4-16 1-1/16-12(-12) 54849 5/8(-10) 7/8-14 7/8-14(-10) 54850 5/8(-10) 7/8-14 3/4-16(-8) 54851 5/8(-10) 7/8-14 1-1/16-12(-12) 54852 3/4(-12) 1-1/16-12 1-1/16-12(-12) 24853 3/4(-12) 1-1/16-12 3/4-16(-8) 24854 7/8(-14) 1-3/16-12 1-3/16-12(-14) 24855 1"(-16) 1-5/16-12 1-5/16-12(-16) 24856 1"(-16) 1-5/16-12 1-1/16-12(-12) 2



PIPe AdAPTeR - STRAIGHTnPTF MALe TO nPSM SWIVeL FeMALe

Part Female Pipe Male Pipe Pkgno. Thread Thread Qty5264 1/8-27(-2) 1/8-27(-2) 55265 1/8-27(-2) 1/4-18(-4) 55336 1/4-18(-4) 1/8-27(-2) 55266 1/4-18(-4) 1/4-18(-4) 55337 3/8-18(-6) 1/4-18(-4) 55267 3/8-18(-6) 3/8-18(-6) 55268 3/8-18(-6) 1/2-14(-8) 55269 1/2-14(-8) 3/8-18(-6) 55270 1/2-14(-8) 1/2-14(-8) 55338 1/2-14(-8) 3/4-14(-12) 55339 3/4-14(-12) 1/2-14(-8) 25271 3/4-14(-12) 3/4-14(-12) 25272 1-11½(-16) 1-11½(-16) 25340 1-1/4-11½(-20) 1-1/4-11½(-24) 25341 1-1/2-11½(-24) 1-1/2-11½(-24) 25342 2-11½(-32) 2-11½(-32) 2

45° PIPe eLBOWnPTF MALe TO nPSM SWIVeL FeMALe

Part Female Pipe Male Pipe Pkgno. Thread Thread Qty5343 1/8-27(-2) 1/8-27(-2) 25273 1/4-18(-4) 1/4-18(-4) 25274 3/8-18(-6) 3/8-18(-6) 25275 3/8-18(-6) 1/2-14(-8) 25276 1/2-14(-8) 3/8-18(-6) 25277 1/2-14(-8) 1/2-14(-8) 25278 3/4-14(-12) 3/4-14(-12) 25279 1-11½(-16) 1-11½(-16) 25344 1-1/4-11½(-20) 1-1/4-11½(-20) 25345 1-1/2-11½(-24) 1-1/2-11½(-24) 2

90° PIPe eLBOWnPTF MALe TO nPSM SWIVeL FeMALe

Part Female Pipe Male Pipe Pkgno. Thread Thread Qty5346 1/8-27(-2) 1/8-27(-2) 25280 1/4-18(-4) 1/4-18(-4) 25281 3/8-18(-6) 3/8-18(-6) 25282 3/8-18(-6) 1/2-14(-8) 25283 1/2-14(-8) 3/8-18(-6) 25284 1/2-14(-8) 1/2-14(-8) 25285 3/4-14(12) 3/4-14(-12) 25286 1-11½(-16) 1-11½(-16) 25347 1-1/4-11½(-20) 1-1/4-11½(-20) 15348 1-1/2-11½(-24) 1-1/2-11½(-24) 15349 2-11½(-32) 2-11½(-32) 1





PIPe AdAPTeR - STRAIGHTnPTF FeMALe TO nPSM SWIVeL

FeMALe

Part Rigid Swivel Pkgno. Pipe Thread Pipe Thread Qty5287 1/4-18(-4) 1/4-18(-4) 55288 3/8-18(-6) 3/8-18(-6) 55289 1/2-14(-8) 3/8-18(-6) 55290 1/2-14(-8) 1/2-14(-8) 25291 3/4-14(-12) 3/4-14(-12) 25292 1-11½(-16) 1-11½(-16) 2



*O-Ring Boss Thread

ORB* TO nPSM FeMALe SWIVeL

Part Tube Straight Female Pkgno. O.d. O-Ring Pipe Qty5297 1/4(-4) 7/16-20 1/4-18(-4) 55298 3/8(-)6 9/16-18 1/4-18(-4) 55299 3/8(-6) 9/16-18 3/8-18(-6) 55391 3/8(-6) 9/16-18 1/2-14(-8) 55300 1/2(-8) 3/4-16 3/8-18(-6) 55301 1/2(-8) 3/4-16 1/2-14(-8) 55302 5/8(-10) 7/8-14 1/2-14(-8) 25303 1/2(-8) 3/4-16 3/4-14(-12) 25304 5/8(-10) 7/8-14 3/4-14(-12) 25305 3/4(-12) 1-1/16-12 3/4-14(-12) 25306 1"(-16) 1-5/16-12 1-11½(-16) 2

ORB* TO 90° nPSM SWIVeL FeMALe

Part Tube Straight Female Pkgno. O.d. O-Ring Pipe Qty5313 1/4(-4) 7/16-20 1/4-18(-4) 25314 3/8(-6) 9/16-18 3/8-18(-6) 25315 1/2(-8) 3/4-16 3/8-18(-6) 25316 1/2(-8) 3/4-16 1/2-14(-8) 25317 5/8(-10) 7/8-14 1/2-14(-8) 25318 1/2(-8) 3/4-16 3/4-14(-12) 15319 5/8(-10) 7/8-14 3/4-14(-12) 25320 3/4(-12) 1-1/16-12 3/4-14(-12) 25321 1"(-16) 1-5/16-12 1-11½(-16) 1

ORB* TO 45° nPSM FeMALe eLBOW

Part Tube Straight Female Pkgno. O.d. O-Ring Pipe Qty5307 1/2(-8) 3/4-16 3/8-18(-6) 25308 1/2(-8) 3/4-16 1/2-14(-8) 25309 5/8(-10) 7/8-14 1/2-14(-8) 25310 1/2(-8) 3/4-16 3/4-14(-12) 15311 3/4(-12) 1-1/16-12 3/4-14(-12) 25312 1"(-16) 1-5/16-12 1-11½(-16) 1




nPTF FeMALe PIPe 90° eLBOW

Part Pipe Pkgno. Thread Qty6433 1/8 26434 1/4 26435 3/8 26436 1/2 26437 3/4 26438 1" 2WeATHeRHeAd SeRIeS C3509dAyCO SeRIeS 2202



nPTF 90° STReeT eLBOW

WEATHERHEAD SERiES C3409 • DAYCo SERiES 2102Part Pipe Pkgno. Thread Qty6439 1/8 26440 1/4 26441 3/8 26442 1/2 26443 3/4 26444 1" 2

nPTF FeMALe PIPe Tee

WEATHERHEAD SERiES C3709 • DAYCo SERiES 022TPart Pipe Pkgno. Thread Qty6445 1/8 26446 1/4 26447 3/8 26448 1/2 26449 3/4 26450 1" 2

Hex BUSHInGnPTF MALe TO nPTF FeMALe

WEATHERHEAD SERiES C3109 • DAYCo SERiES 0102Part Pipe Size Pkgno. (Male x Female) Qty6416 1/4 x 1/8 56417 3/8 x 1/8 56418 3/8 x 1/4 56419 1/2 x 1/4 56420 1/2 x 3/8 56421 3/4 x 3/8 26422 3/4 x 1/2 26423 1 x 1/2 26424 1 x 3/4 26425 1¼ x 1 26426 1½ x 1¼ 2

nPTF MALe Hex nIPPLe

WEATHERHEAD SERiES C3069 • DAYCo SERiES 0101Part Pipe Pkgno. Thread Qty6406 1/8 56407 1/4 56408 3/8 56409 3/8 x 1/4 56410 1/2 26411 1/2 x 1/4 26412 1/2 x 3/8 26413 3/4 26414 3/4 x 1/2 26415 1" 2

nPTF MALe Hex PLUG

Part Pipe Pkgno. Thread Qty6427 1/8 56428 1/4 56429 3/8 56430 1/2 26431 3/4 26432 1" 2

nPTF FeMALe COUPLInG

Part Pipe Pkgno. Thread Qty6400 1/8 56401 1/4 56402 3/8 56403 1/2 26404 3/4 26405 1" 2


VInyL GReASe FITTInG CAPSKeeps grease fittings clean and easy to find. Bright yel-low for visibility. Pkg: 100 each. Part no. 3053

1/4"-28 SAe TAPeRed THReAdPopular on automotive, light truck, and machinery applications due to

small thread size. Part Overall Pkgno. description Length Qty3069 Straight Short Threads 35/64 503070 Straight Long threads 11/16 253071 Straight Long 31/32 253072 45° Angle 7/8 25 3073 45° Angle Long thread 1-1/16 253074 90° Angle 11/16 25

3/16" 1/4" 5/16"

#3069 #3070 #3071 #3072 #3073 #3074

#3050 #3051 #3052 #3056 #3057

#3054 #3055

#3066 #3067

#3110 #3112 #31136 mm 6 mm 6 mm50/pkg 25/pkg 25/pkg

#3114 #31158 mm 8 mm50/pkg 25/pkg

#3117 #3118 #311910 mm 10 mm 10 mm50/pkg 25/pkg 25/pkg

MeTRIC SIZeS ALL 1.0 THREAD PITCH

Grease FittingsHigh pressure ball check. Case hardened steel, Zinc Dichromate plated. Meets S.A.E. J-534C specifications.

1/4" PIPe THReAdWidely used for larger bearings on farm machinery and heavy equipment.

Recommended for heavy lubricants in cold weather.Part Overall Pkgno. description Length Qty3066 Straight 7/8 253067 67½° Angle 1-1/16 25

1/8" PIPe THReAdThick-wall construction for unequalled strength.

Part Overall Pkgno. description Length Qty3050 Straight Short 5/8 503051 Straight Long 1-5/16 253052 Straight Extra-Long 1-3/4 253054 30° Angle 15/16 253055 45° Angle 7/8 253056 65° Angle 7/8 253057 90° Angle 13/16 25

dRIVe TyPeSaves time and simplifies replacement of damaged fittings. For low to

medium pressures only.Part Approx. drill Overall Pkgno. Size* Length Qty3080 3/16 1/2 503081 1/4 1/2 503082 5/16 9/16 503105 Drive Fitting Tool, 4" 1

*Note: Drill size is approximate. Hole tolerance will vary with material being drilled. A test drilling is highly recommended.


LiNCOLN® BRAndSTAndARd GReASe GUn COUPLeR

Jaw-type coupler features hardened jaws, Buna-N synthetic rubber seal, and spring loaded check valve. Fits all 1/8" NPT thread. Maximum operating pressure: 6,000PSI. (Lincoln no. 5852) Part no. 3120

Grease Gun AccessoriesSTAndARd GReASe GUn COUPLeRS

Jaw-type coupler features hardened jaws, Buna-N synthetic rubber seal, and spring loaded check valve. Fits all 1/8" NPT thread. Recommended working pres-sure: 3000PSI. Part no. 3103

HeAVy dUTy GReASe GUn COUPLeR

For heavy duty applications. 1/8 NPT. Recommended working pressure: 4000PSI. Part no. 3104

GReASe InJeCTOR needLe

Lubricates in very tight places like universal joints and sealed bearings. Tempered stainless steel needle. Equipped with standard grease fitting and protective plastic holder. Length: 2-1/4". Part no. 3108

LiNCOLN® BRAnd HeAVy dUTy GReASe GUn COUPLeR

For heavy duty applications. 1/8 NPT. Maximum operat-ing pressure: 7,500PSI. (Lincoln no. 5845) Part no. 3121

needLe nOSe dISPenSeR

Dispenses a fine line of grease through the needle nose. 3/4" adapter with 1/8" male and female npt. Use with extension or hose. 1-5/8" O.A. Length.Part no. 3102

SWIVeL exTenSIOn WITH COUPLeR

Locks in any of eight 45° positions from rigid to right angle. 1/8" NPT. For hard to reach fittings. Standard coupler included. Max. working pressure: 3000PSI. Part no. 3137

9/16"

1-7/16"

9/16" W.A.F.

9/16"

1-1/2"

2-1/16"

11/16" W.A.F.

5/8"

11/16" W.A.F.

1-1/2"

5/8"

4-WAy GReASe FITTInG TOOL

Part no. For Fitting Size Pkg3106 1/8 PT 13107 1/4-28 SAE 1

3106 3107

FILLeR nIPPLeS

Enables hand grease guns to be loaded using filler pump method. Includes ball check. 1/8" NPT Male.

Part Thread nose O.A. Hexno. Size dia. Length Size Style3122 1/8NPT 11/32 1-1/4 7/16 Small3123 1/8NPT 9/16 1-3/16 5/8 Large

3122 3123

GReASe GUn exTenSIOn

Angle pipe, 6" length, replacement for most hand oper-ated grease guns. Part no. 3109


Grease Gun Accessories

STAndARd GReASe HOSeS

High quality grease hoses with 1/8" npt male fittings ar each end. Fits all standard hand grease guns. 1/8" NPT male connection. Working pressure 3,000 psi. Meets us government specification MIL-L-4387C.

Not for power operated lube equipment

Part no. Length Pkg3097 12" 13098 18" 1

LInCOLn FLex-O-GRIP GReASe HOSeS

Coil spring reinforced for power and hand-operated grease guns. Provides a non-slip, push-pull grip yet prevents accidental “kinking” which can cause

ruptures. 1/8" NPT male connection. Working pressure 4500psi.

Note: install with coil spring near hydraulic coupler

Part no. Length Pkg3133 12" 13134 18" 1

WARnInG! dO nOT HOLd GReASe HOSe WHILe PUMPInG THe GReASe GUn. RePLACe dAMAGed HOSeS AT OnCe.

Grease Guns &Control Valve

PISTOL GRIP TyPe HeAVy dUTy GReASe GUnS

Choose the Pistol-Grip for fast, one-handed operation. Similar features of the 3090. Gun head, toggle and handle assembly are zinc plated, barrel is finished in high gloss blue poly urethane paint. Length: 15-1/2". Lube capacity: 14-1/2 oz. cartridge or 16 oz. bulk. One year limited warranty. "Flip-Over" follower is set for cartridge use.

Part Lincolnno. description Model3094 Grease Gun w/18" Hose 11333095 Grease Gun w/6" Extension 1132

3094 3095

"THE BRAND THE PROS DEMAND"

HIGH PReSSURe COnTROL VALVeHandy trigger guard prevents pinching. 7,500 psi maxi-mum operating pressure. Precision-machined all steel handle, body and guard. Knurled handle for positive grip. Rigid extension and coupler included. Inlet: 1/4" NPT female. Outlet: 1/8" NPT female. Lincoln #740. Part no. 3125

HIGH PReSSURe UnIVeRSALFor use with lubricants only. Not for corrosive or abrasive materials. 1/4"npt male ends.Lincoln #83594. Part no. 3126

3125 3126



• Jam-proof toggle mechanism prevents binding or accidental bending of plunger.• Precision fit and hardened plunger prevents lubricant bypass, resists scoring for longer life.• Rugged cast iron pump head for strength and durability.• Delivers fast, dependable lubrication.• Follower rod locks into follower to force prime.• Exclusive "Flip-Over" follower allows a superior seal for either cartridge or bulk loading applications* • Extra-heavy follower spring insures positive priming and uninterrupted pumping action.• Accessible check valve allows easy cleaning without gun disassembly.• Spacer located on follower rod handle prevents finger pinching.• Handy three-way loading by suction, filler pump or cartridge.• Long handle for increased leverage.• Heavy gauge powder coated steel barrel.• Coupler and 6" ridgid extension included.

The first choice of users everywhere. Gun head, toggle and handle assembly are zinc plated, barrel is finished in high gloss blue polyurethane paint. Length: 21-3/4". Lube capacity: 14-1/2 oz. cartridge or 16 oz. bulk. *Set for cartridge use. One year limited warranty. Part no. 3090

Grease GunsLincoln grease guns...recognized as the industry standard for performance and value...the first choice of professional mechanics everywhere. As a professional mechanic, your livelihood depends on your tools, so why settle for anything less than the best? Lincoln’s high-pressure, heavy-duty, grease guns are built for a lifetime of performance, proven over years of use and backed by the industry’s most comprehensive warranty.

#3090The first choice of users everywhere.

HeAVy dUTy LeVeR TyPe(Lincoln model 1142)

LOnG BARReL LeVeR TyPe(Lincoln model 1151)

Same as 3090 (above) but holds 21 ounces bulk; flip-over follower set for bulk loading. Part no. 3091

POWeR-LUBeRTM 12-VOLT CORdLeSS GReASe GUn

(Lincoln model 1242)

Power-LuberTM delivers a consistent 6000 psi grease flow and unrestricted mobility. You may never pick up a manual grease gun again! Comes with heavy-duty carrying case, 110-Volt Fast Charger, 12-Volt Ni-Cad Rechargeable Battery and 30" Flex Hose with Spring Guard. Custom carrying case is designed to hold two optional grease cartridges. Other features: Powerful 12 volt motor, planetary gear drive, bleeder valve, accessible check valve, opening for filler nipple, versatile 3-way loading (set for cartridge use). With a fully charged battery, the Power Luber dispenses a minimum of three cartridges of grease under normal conditions.

The Power-LuberTM Set includes carrying case, Fast Charger, one 12-Volt Ni-Cad Battery and 30" Hose. Part no. 3088

POWeR-LUBeR™ ACCeSSORIeS"THE BRAND THE PROS DEMAND"

#3088 The most advanced grease gun ever created.

12-Volt Rechargeable Battery Keep an extra battery on hand. High capac-ity 12V Ni-Cad with 1300 mA-hr capacity. Part no. 3088A

30" Grease Whip Hose for Power-Luber™. Spring guards on each end. 7/16-28 male inlet, 1/8 npt male outlet. 7500 PSI working pressure. Part no. 3132



A

Aircraft Cable 11-18Alloy Chain Links 11-16Alloy Steel Chain Slings 11-11Anchor Chain

Grade 30 11-7Grade 40 11-8

B

Binder Chains 11-9Binders, Load 11-10Bolt Snaps

Swivel Eye 11-20Breakers, Roller Chain 11-21

C

CableFerrules 11-18Stops 11-18

Cable Crimpers 11-19Chain

Alloy Gr 80 11-4Alloy Gr 100 11-5Anchor

Grade 30 "BBB" 11-7Grade 40 High Test 11-8

Binder ChainGrade 43 11-9Grade 70 11-9

High Test Gr 43 11-2Powder Coated Steel Chain

Black 11-6Red 11-6White 11-6Yellow 11-6

Proof Coil Gr 30 11-1Roller 11-21Security Maxx 11-7Slings 11-11Sprocket 11-21Stainless Steel 11-8

Type 304 11-8Type 316 11-8

Transport Gr 70 11-3Weightlifter's 11-9Weldless 11-12


Chain Links 11-15, 11-16, 11-17Alloy Coupling 11-16Cold Shuts 11-15Connecting 11-15Double Clevis Links 11-16Lap 11-15Mid-Links 11-16Quick 11-15Repair 11-15

Clevises 11-16, 11-17Cold Shuts 11-15Connecting Links

Alloy Chain 11-16Proof Coil Chain 11-15

D

Double Clevis Links 11-16Drive Chain 11-21

F

FerrulesCable 11-18

H

High Test Chain 11-2Hoist Hooks 11-12Hooks

Claw 11-12Gr 100 Self Locking 11-12Grab 11-13

Gr 70 Safety Latch 11-13Gr 70 Transport/Alloy 11-13Gr 70 Twist Lock HD Latched 11-13Gr 80 Alloy 11-13Gr 100 Alloy 11-13Grade 30 Weldable 11-13Grade 43 High Test 11-13

Hoist 11-12Latch Repair 11-14Slip 11-14

Gr 70 Transport Safety Latch 11-14Gr 80 Alloy 11-14Gr 100 Safety Latch 11-14Grade 43 High Test 11-14

T-Grab 11-12Tractor Drawbar 11-12

L

Lap Links 11-15Load Binders 11-10

Lever 11-10Ratchet 11-10Utility Chain Tightener 11-10

M

Master Links 11-22Mid-Links 11-16

N

Nylon Protective Cover 11-7

P

Padlocks 11-7Progressive Resistance Weightlifter's

Chain 11-9Proof Coil Chain 11-1Pullers

Roller Chain 11-21

Q

Quick Links 11-15

R

Ratchet Straps 11-20Repair Links

Welded Chain 11-15, 11-16Roller Chain 11-21

Breakers 11-21

Puller 11-21Rubber Straps & Rope 11-20

S

SafetyHook Latch Repair 11-14

Security MaxxChain 11-7Nylon Protective Cover 11-7Padlocks 11-7

Shackles 11-16, 11-17Clevises 11-12Round Pin Anchor 11-12Safety Anchor 11-12Screw Pin Anchor

Alloy 11-17Hot Dipped Galvanized 11-16Stainless Steel 11-17

Websling 11-12Slings

Master Link 11-17Repalcement Tag 11-17

SLINGS 11-11Snaps

Bolt 11-20Double End 11-20Open End 11-20Swivel Rope 11-20

Sprocket Chain 11-21Stainless Steel

Roller Chain 11-21Straps

Ratchet 11-20Rubber Tarp 11-20Trap 11-20

T

Thimbles, Wire Rope 11-18Tools

Roller Chain 11-21Wire Rope Cutter 11-19Wire Rope Swager 11-19

Transport Chain 11-3Turnbuckles 11-19

Aluminum 11-19Drop Forged Steel 11-19

U

Utility Chain Tightener 11-10

W

Weightlifter's Chain 11-9Weldless Chain 11-12


Wire Rope 11-18Clamps 11-18Clips 11-18Crimper 11-19Swager 11-19Thimbles 11-18

Wire Rope Cutter 11-19

Section 11 Chain Index

11-II FAX: (219)-696-6413 • WEBSITE: www.mpi-online.comRevised 12/2011


Grade 30 ChainProof Coil

A general purpose chain for all ordinary applications not requiring high strength characteristics. Frequently used for light duty tow chains, tie down chains and logging chains. Identified with "L3" or similar grade marking. not for overhead lifting. "Long Link" design (1/4, 5/16, 3/8 only) provides the same working load limits in a lighter chain.Our chain is made in the USA unless noted. (Not available in cut lengths)

Chain Specifications Working WeightTrade Load Material Inside Inside PerSize Limit(lbs) diameter Length Width 100 ft1/8"* 400 .160 .90 .27 213/16"* 750 .210 .95 .10 381/4" 1300 .275 1.24 .46 635/16" 1900 .330 1.30 .49 913/8" 2650 .397 1.45 .60 351/2"* 4500 .520 1.56 .81 645/8"* 6900 .630 1.87 1.00 393*regular links

PailsPart Trade number Size Finish Min. Qty38-445 1/8"* IMPORT zinc 500'38-308 3/16"* zinc 250'38-309 1/4"LL zinc 141'38-310 5/16"LL zinc 92'38-311 3/8"LL zinc 63'38-312 1/2"* zinc 36'

Halfdrums

Part Trade number Size Finish Qty38-300D2 1/8"*IMPORT SC 1000'38-445D2 1/8"*IMPORT zinc 1000'38-444D2 1/8"*IMPORT HG 1000'38-301D2 3/16"* SC 800'38-308D2 3/16"* zinc 800'38-400D2 3/16"* HG 800'38-302D2 1/4"LL SC 400'38-309D2 1/4"LL zinc 400'38-401D2 1/4"LL HG 400'38-303D2 5/16"LL SC 275'38-310D2 5/16"LL zinc 275'38-402D2 5/16"LL HG 275'38-304D2 3/8"LL SC 200'38-311D2 3/8"LL zinc 200'38-403D2 3/8"LL HG 200'38-305D2 1/2"* SC 100'38-312D2 1/2"* zinc 100'38-404D2 1/2"* HG 100'38-306D2 5/8"* SC 75'38-313D2 5/8"* zinc 75'38-405D2 5/8"* HG 75'38-307D2 3/4"*IMPORT SC 50'38-406D2 3/4"*IMPORT HG 50'

drumsPart Trade number Size Finish Qty38-300D 1/8"*IMPORT SC 2000'38-445D 1/8"*IMPORT zinc 2000'38-444D 1/8"*IMPORT HG 2000'38-301D 3/16"* SC 1600'38-308D 3/16"* zinc 1600'38-400D 3/16"* HG 1600'38-302D 1/4"LL SC 800'38-309D 1/4"LL zinc 800'38-401D 1/4"LL HG 800'38-303D 5/16"LL SC 550'38-310D 5/16"LL zinc 550'38-402D 5/16"LL HG 550'38-304D 3/8"LL SC 400'38-311D 3/8"LL zinc 400'38-403D 3/8"LL HG 400'38-305D 1/2"* SC 200'38-312D 1/2"* zinc 200'38-404D 1/2"* HG 200'38-306D 5/8"* SC 150'38-313D 5/8"* zinc 150'38-405D 5/8"* HG 150'38-307D 3/4"*IMPORT SC 100'38-406D 3/4"*IMPORT HG 100'

We pay the freight on Chain orders over 1,000 lbs

(LL=Long Links *Regular Links SC= Self-Colored(Plain) HG= Hot Galvanized)

11-2 FAX: (219)-696-6413 • WEBSITE: www.mpi-online.comRevised 12/2011

Grade 43 ChainHigh Test

Designed for use in load binding, logging and other applications requiring higher strength to weight ratios than Grade 30 chain. Used extensively in the trucking industry for binder chains. Identified with "L4" or similar grade marking. not for overhead lifting. Our chain is made in the USA unless noted. (Not available in cut lengths)

Chain Specifications Working WeightTrade Load Material Inside Inside PerSize Limit(lbs) diameter Length Width 100 ft1/4" 2600 .275 1.02 .50 695/16" 3900 .330 1.15 .49 1003/8" 5450 .397 1.30 .60 1451/2" 9200 .520 1.56 .81 2655/8" 13000 .630 1.87 1.00 393

PailsPart Trade number Size Finish Qty38-315 1/4" SC 150'38-315EG 1/4" zinc 135'38-315HG 1/4" HG 135'38-316 5/16" SC 100'38-316EG 5/16" zinc 90'38-316HG 5/16" HG 90'38-317 3/8" SC 75'38-317EG 3/8" zinc 63'38-317HG 3/8" HG 63'38-318 1/2" SC 37'38-318EG 1/2" zinc 37'

Halfdrums

Part Trade number Size Finish Qty38-315D2 1/4" SC 400'38-315D2EG 1/4" zinc 400'38-315D2HG 1/4" HG 400'38-316D2 5/16" SC 275'38-316D2EG 5/16" zinc 275'38-316D2HG 5/16" HG 275'38-317D2 3/8" SC 200'38-317D2EG 3/8" zinc 200'38-317D2HG 3/8" HG 200'38-318D2 1/2" SC 100'38-318D2EG 1/2" zinc 100'38-318D2HG 1/2" HG 100'38-319D2 5/8" SC 75'38-319D2HG 5/8" HG 75'

drumsPart Trade number Size Finish Qty38-315D 1/4" SC 800'38-315DEG 1/4" zinc 800'38-315DHG 1/4" HG 800'38-316D 5/16" SC 550'38-316DEG 5/16" zinc 550'38-316DHG 5/16" HG 550'38-317D 3/8" SC 400'38-317DEG 3/8" zinc 400'38-317DHG 3/8" HG 400'38-318D 1/2" SC 200'38-318DEG 1/2" zinc 200'38-318DHG 1/2" HG 200'38-319D 5/8" SC 150'38-319DHG 5/8" HG 150'


(SC= Self-Colored(Plain) HG= Hot Galvanized)


Grade 70 ChainTransport

An improvement over High Test chain, it meets stringent Department of Transportation (DOT) regulations with smaller, easier to handle chain. Identified with ""L7"" or similar grade marking. not for overhead lifting. Packaged in drums, pails and cut to order. Supplied in yellow (gold) chromate finish for easy identification and rust prevention. Our chain is made in the USA unless noted. (Not available in cut lengths)

Chain Specifications Working WeightTrade Load Material Inside Inside PerSize Limit(lbs) diameter Length Width 100 ft1/4" 3150 .279 1.24 .50 745/16" 4700 .330 1.15 .49 1003/8" 6600 .397 1.30 .60 1451/2" 11300 .520 1.56 .81 264

PailsPart Trade number Size Finish Qty38-324 1/4" Gold 135'38-325 5/16" Gold 100'38-326 3/8" Gold 75'38-327 1/2" Gold 37'

Halfdrums

Part Trade number Size Finish Qty38-324D2 1/4" Gold 400'38-325D2 5/16" Gold 275'38-326D2 3/8" Gold 200'38-327D2 1/2" Gold 100'38-420D2 5/8" Gold 75'

drumsPart Trade number Size Finish Qty38-324D 1/4" Gold 800'38-325D 5/16" Gold 550'38-326D 3/8" Gold 400'38-327D 1/2" Gold 200'38-420D 5/8" Gold 150'

How to choose your chain and attachments.1. Know your working load limits and don't exceed them.2. Use ONLY Grade 80 or Grade 100 Alloy for overhead lifting.3. Use Gr 43 or Gr 70 chain for binding loads on over the road hauling. 4. Use Gr 30 chain for general purpose binding, towing, log chains and general shop use..5. Match components like hooks, connecting links and binders with the chain having a similar or lower work-ing load limits - use high test hooks on high test chain, transport hooks on transport chain, etc. etc.



Grade 80 Chain Alloy

Rugged, versatile, high strength chain manufactured from special alloy steel. This chain is quenched and tempered, proof tested and certified for overhead lifting applications. Meets NACM, ASTM and OSHA speci-fications. Identified with ""L8"" or similar grade marking. Gr 100 Alloy available on special order. Certified lifting assemblies available on special order. Packaged in drums, pails and cut to order. Shot Blast (Self-colored) finish.

Chain Specifications Working WeightTrade Load Material Inside Inside PerSize Limit(lbs) diameter Length Width 100 ft9/32" 3500 .279 .88 .41 725/16" 4500 .330 1.02 .48 1063/8" 7100 .397 1.22 .57 1501/2" 12000 .520 1.56 .75 2615/8" 18100 .630 1.78 .86 3823/4" 28300 .787 2.23 1.07 5957/8" 34200 .875 2.25 1.14 7761" 47700 1.00 3.07 1.49 9391-1/4" 72300 1.26 3.25 1.66 1571

PailsPart Trade number Size Finish Qty38-321 9/32" Self-Colored 100'38-328 5/16" Self-Colored 80'38-322 3/8" Self-Colored 60'38-323 1/2" Self-Colored 40'

Halfdrums

Part Trade number Size Finish Qty38-321D2 9/32" Self-Colored 400'38-328D2 5/16" Self-Colored 275'38-322D2 3/8" Self-Colored 250'38-323D2 1/2" Self-Colored 150'38-329D2 5/8" Self-Colored 100'38-440D2 3/4" Self-Colored 50'38-441D2 7/8" Self-Colored 50'38-442D2 1" Self-Colored 55'38-443D2 1-1/4" Self-Colored 45'

drumsPart Trade number Size Finish Qty38-321D 9/32" Self-Colored 800'38-328D 5/16" Self-Colored 550'38-322D 3/8" Self-Colored 500'38-323D 1/2" Self-Colored 300'38-329D 5/8" Self-Colored 200'38-440D 3/4" Self-Colored 100'38-441D 7/8" Self-Colored 100'38-442D 1" Self-Colored 100'38-443D 1-1/4" Self-Colored 90'

Cut LengthsPart Trade number Size Finish38-321CL 9/32" Self-Colored38-328CL 5/16" Self-Colored38-322CL 3/8" Self-Colored38-323CL 1/2" Self-Colored38-329CL 5/8" Self-Colored38-440CL 3/4" Self-Colored38-441CL 7/8" Self-Colored38-442CL 1" Self-Colored38-443CL 1-1/4" Self-Colored



Grade 100 Chain Alloy

Alloy Grade 100 Chain is American made, produced from the highest quality domestic alloy steel and finished with a black or gray finish that is not a rust preventative. Meeting the specifications of the NACM, ASTM, and OSHA, our chain and Grade 100 attachments offer a design factor of 4 to 1. Quality testing is done throughout the manufacturing process. Each link is individually proof tested and certified.

Chain Specifications Working WeightTrade Load Material Inside Inside PerSize Limit(lbs) diameter Length Width 100 ft9/32" 4300 .281 .88 .40 733/8" 8800 .394 1.25 .57 1441/2" 15000 .512 1.56 .73 2465/8" 22600 .630 1.92 .86 3703/4" 35300 .787 2.40 1.07 580

PailsPart Trade number Size Finish Qty38-339 9/32" Self-Colored 100'38-397 3/8" Self-Colored 60'38-398 1/2" Self-Colored 40'

Halfdrums

Part Trade number Size Finish Qty38-399D2 9/32" Self-Colored 400'38-397D2 3/8" Self-Colored 250'38-398D2 1/2" Self-Colored 150'38-407D2 5/8" Self-Colored 100'38-408D2 3/4" Self-Colored 50'

drumsPart Trade number Size Finish Qty38-399D 9/32" Self-Colored 800'38-397D 3/8" Self-Colored 500'38-398D 1/2" Self-Colored 300'38-407D 5/8" Self-Colored 200'38-408D 3/4" Self-Colored 100'

Cut LengthsPart Trade number Size Finish38-399CL 9/32" Self-Colored38-397CL 3/8" Self-Colored38-398CL 1/2" Self-Colored38-407CL 5/8" Self-Colored38-408CL 3/4" Self-Colored



Powder Coated Steel ChainSafety yellow

is the most commonly used chain for marking off ma-chinery in industrial plants or any safety related barrier application.

Chain Specifications Working WeightTrade Load Material Inside Inside PerSize Limit(lbs) diameter Length Width 1 ft3/16" 520 .192 1.31 .05 .37/32" 670 .218 1.39 .38 .361/4" 880 .25 1.52 .45 .485/16" 1375 .312 1.85 .56 .69

LengthsPart Trade number Size Finish Qty38-412 3/16" Safety Yellow 200'38-413 7/32" Safety Yellow 400'38-430 1/4" Safety Yellow 100'38-431 5/16" Safety Yellow 100'

Redis often used for marking off dangerous locations (ex-plosive areas, high voltage areas, hazardous material locations, etc) in industrial plants, construction sites and oil rigs.

Chain Specifications Working WeightTrade Load Material Inside Inside PerSize Limit(lbs) diameter Length Width 1 ft3/16" 520 .192 1.31 .05 .31/4" 880 .25 1.52 .45 .48

LengthsPart Trade number Size Finish Qty38-435 3/16" Red 100'38-436 1/4" Red 100'

Whiteis often used for marine applications and outdoor bar-riers along pathways and to mark off gardens.

Chain Specifications Working WeightTrade Load Material Inside Inside PerSize Limit(lbs) diameter Length Width 1 ft3/16" 800 .218 .97 .40 .31/4" 1300 .276 1.19 .50 .485/16" 1900 .334 1.12 .50 .69

LengthsPart Trade number Size Finish Qty38-414D2 3/16" White 800'38-414C 3/16" White 100'38-414CL 3/16" White 20'38-415 1/4" White 96'38-416 5/16" White 60'

Blackis our most commonly purchased outdoor barrier chain for use along pathways and to mark off gardens, side-walks and parking lots.

Chain Specifications Working WeightTrade Load Material Inside Inside PerSize Limit(lbs) diameter Length Width 1 ft1/4" 1300 .275 1.24 .46 .485/16" 1900 .330 1.30 .49 .693/8" 2650 .397 1.45 .60 1/2" 4500 .52 1.56 .81

LengthsPart Trade number Size Finish Qty38-418D2 1/4" Black 400'38-418 1/4" Black 133'38-418CL 1/4" Black 20'38-452D2 5/16" Black 275'38-417D2 3/8" Black 200'38-417 3/8" Black 66'38-417CL 3/8" Black 20'38-453D2 1/2" Black 100'38-453 1/2" Black 40'38-453CL 1/2" Black 10'


Security Maxx Chain

Security Maxx chain is "thru hardened" and not "case hardened" like our competitors. Our thru hardened chain has a hardness of 38 to 42 HRC which is the highest you can get on a thru hardened chain. AND it's hard all the way through.The 3/8" size will withstand the bite of a 4 ft bolt cutter under 300 lbs of weight! Use the 1/2" size and the jaws of 90% of all bolt cutters can't fit around it.

Chain SpecificationsSize diameter Length Width Wt Per3/8 0.394-0.400" 1.51" 0.66" 1.61 lb (10mm) (38.2mm) (17.0mm)

1/2 0.512-0.524" 1.76" 0.83" 2.82 lb (13mm) (44.5mm) (21.0mm)

LengthsPart Trade number Size Finish Qty38-447CL 3/8" zinc 4'+38-448CL 1/2" zinc 4'+

You can be assured of the high security and durability our locks will provide. Feel the weight in your hand. Turn the key or release the shackle and note that the motion is smooth with no spring loaded parts to bind or wear out over time.

Part number Use w/chain Qty9-655KD 3/8"-1/2" 1

Heavy duty Padlocks

nylon Protective CoverCover is woven from thousands of nylon filaments into a self-renewing, abrasion-resistant fabric sleeve. As it is scuffed and worn, its filaments friz forming an even thicker more protective shield. This smooth-bore sleeve is easily installed over hose, chains, cables or springs and may be secured with nylon cable ties or band-clamps.Item no. Use w/chain Min. Qty9-673 3/8" 4 ft9-674 1/2" 4 ft

Grade 30 "BBB" Anchor ChainA low carbon steel, general purpose anchor (windlass) chain, with a short, compact link. The short link makes it more flexible and ideally suited as a windlass chain. Compatible with all major brands of windlasses. Check fit or contact windlass manufacturer before purchase. Our extra thick hot dip galvanized finish is recommended for all marine applications but BBB anchor chain is also available electro-zinc plated and self-colored.

PailsPart Trade number Size Finish Qty38-434 1/4" HG 141'38-424 5/16" HG 92'38-425 3/8" HG 63'

Chain Specifications Working LinksTrade Load Material Inside Inside PerSize Limit(lbs) diameter Length Width 1ft1/4" 1300 .281 .87 .43 145/16" 1900 .343 1.00 .50 123/8" 2650 .406 1.09 .62 111/2" 4500 .531 1.34 .75 9

Half drumsPart Trade number Size Finish Qty38-434D2 1/4" HG 400'38-424D2 5/16" HG 275'38-425D2 3/8" HG 200'38-433D2 1/2" HG 100'

drumsPart Trade number Size Finish Qty38-424D 5/16" HG 550'38-425D 3/8" HG 400'38-433D 1/2" HG 200'


Stainless Steel ChainType 304 Imported

A general purpose, rustproof stainless chain designed for ordinary applications not requiring high strength characteristics nor used in extremely corrosive environments. Imported only. Do not use near salt water.

Chain Specifications Working WeightTrade Load Material Inside Inside PerSize Limit(lbs) diameter Length Width 100 ft1/8" 375 .149 .93 .28 173/16" 830 .204 .94 .40 381/4" 1450 .275 1.24 .47 615/16" 2200 .310 1.26 .50 843/8" 3000 .394 1.38 .57 1401/2" 4600 .512 1.79 .72 234

Cut LengthsPart Trade number Size Finish Min. Qty38-395FT 1/8" SS 50'+38-330FT 3/16" SS 50'+38-331FT 1/4" SS 50'+38-332FT 5/16" SS 25'+38-333FT 3/8" SS 25'+38-334FT 1/2" SS 10'+

Type 316 ImportedA rugged, highly corrosion resistant, low magnetic stainless used in chemical plants worldwide. Best grade for salt water and marine applications

Chain Specifications Working WeightTrade Load Material Inside Inside PerSize Limit(lbs) diameter Length Width 100 ft1/8" 375 .149 .93 .28 173/16" 830 .204 .94 .40 381/4" 1450 .275 1.24 .47 615/16" 2200 .310 1.26 .50 843/8" 3000 .394 1.38 .57 1401/2" 4600 .512 1.79 .72 234

Cut LengthsPart Trade number Size Finish Min. Qty38-396FT 1/8" SS 50'+38-335FT 3/16" SS 50'+38-336FT 1/4" SS 50'+38-337FT 5/16" SS 25'+38-338FT 3/8" SS 25'+38-339FT 1/2" SS 10'+

Grade 40 High Test Anchor ChainA high tensile strength carbon steel anchor (windlass) chain with an ISO short link. The short link makes it more flexible and ideally suited as an windlass chain. Check fit or contact windlass manufacturer before purchase. This extra thick hot dip galvanized finish is recommended for all marine applications but this anchor chain is also available electro-zinc plated and self-colored.

PailsPart Trade number Size Finish Qty38-426 1/4" HG 134'38-421 5/16" HG 90'38-422 3/8" HG 62'

Chain Specifications Working LinksTrade Load Material Inside Inside PerSize Limit(lbs) diameter Length Width 1ft1/4" 2600 .274 .845 .41 14.25/16" 3900 .330 1.03 .50 11.73/8" 5400 .394 1.22 .60 9.87/16" 7200 .467 1.40 .66 8.61/2" 9200 .510 1.59 .77 7.6

Half drumsPart Trade number Size Finish Qty38-426D2 1/4" HG 400'38-421D2 5/16" HG 275'38-422D2 3/8" HG 200'38-423D2 7/16" HG 150'38-433D2 1/2" HG 100'

drumsPart Trade number Size Finish Qty38-426D 1/4" HG 80038-421D 5/16" HG 550'38-422D 3/8" HG 400'38-423D 7/16" HG 300'38-433D 1/2" HG 200'


Progressive Resistance Weightlifter's Chain

Connecting (small) chains slide over the ends of the bar. As you lift, the weight of the chain progressively increases as more and more chain lifts off the floor. The weight you are lifting progressively becomes heavier,

providing maximum muscular stimulation throughout the entire range of motion.

Easy set up change between bench press and dead lifts. Thread the attaching chain through the end link for standing lifts or in the middle of the chain (pictured) to shorten the assembly for incline or bench press. Connecting (small) chains slide over the ends of the bar. As you lift, the weight of the chain progres-sively increases as more and more chain lifts off the floor. The weight you are lifting progressively becomes heavier, providing maximum muscular stimulation throughout the entire range of motion. Pkg Qty: 1 Set

Part Chain number Size Weight Length9-025 1/2" 31 5'9-025-6 1/2" 36 6'9-025-7 1/2" 41 7'9-025-8 1/2" 47 8'9-027 5/8" 45 5'9-027-6 5/8" 53 6'9-027-7 5/8" 60 7'9-027-REP 5/8" 40 5'9-029 3/4" 63 5'9-029-6 3/4" 75 6'

Chain WLL drumSize (lbs) Part no. Qty5/16 x 16' 4,700 38-354 255/16 x 20' 4,700 38-355 25

3/8 x 14' 6,600 38-356 253/8 x 16' 6,600 38-357 253/8 x 20' 6,600 38-358 203/8 x 25' 6,600 38-359 15

(other lengths available from stock)

Grade 80 Alloy also available

Binder ChainsGrade 43 High Test

Binder Chainswith two High Test Clevis Grab Hooks Fully Assembled

Can order less then drum Qty

Grade 70 Transport Binder Chains

with two Transport Clevis Grab Hooks Fully Assembled

Chain WLL drum Size (lbs) Part no. Qty5/16 x 14' 3,900 38-343 255/16 x 16' 3,900 38-344 255/16 x 20' 3,900 38-345 205/16 x 25' 3,900 38-346 20

3/8 x 14' 5,400 38-350 253/8 x 16' 5,400 38-351 253/8 x 20' 5,400 38-352 203/8 x 25' 5,400 38-353 15

(other lengths available from stock)

Meets dOT Regulations Meets dOT Regulations


Load Binders

USA Working IMPORT MinPart Pkg Chain Load Part Pkgnumber Qty Rating Limit (lbs) number Qty10-381 1 1/4 G4 2600 10-381A 1210-758 1 5/16 G4 - 3/8 G4 5400 N/A N/A 5/16 G4 - 3/8 G7 6600 10-758A 1210-763 1 5/16 G4 - 3/8 G8 7100 DB-DF-7100 1210-760 1 3/8 G4 - 1/2 G4 9200 10-760A 6

*Warning: never use above working load limits.

Forged Steel Handle, Forge Alloy Hooks, Meets D.O.T. Specs

Ratchet Type

Binders of all types available on special order. Call today!

Utility Chain Tightener3" takeup, Forged handle and formed swivel J-hooks for tying down equipment and binding light loads. Cylinder tanks, truck end gates, boat trailers. Use with 3/16" proof coil chain (Grade 30). Pkg Qty 10/CTN)

Part Chain Takenumber Size W.L.L.* Up10-384A 3/16" 375# 3"


Compact

RegularLever Type

• Forged Steel Handle • Forge Alloy Hooks •Continuous takeup for infinite adjustment• Easier to operate and safer to use than lever type binders - no snap back! •Meets D.O.T. Specs

USA Working IMPORTPart Pkg Chain Load Part Pkgnumber Qty Rating Limit (lbs) number Qty10-768 1 1/4 G4 2600 10-768A 1210-759 1 5/16 G4 - 3/8 G4 5400 10-759A 12N/A 5/16 G4 - 3/8 G7 6600 10-764A 1210-762 1 5/16 G4 - 3/8 G8 7100 N/A 10-761 1 3/8 G4 - 1/2 G4 9200 10-761A 1210-767 1 1/2 G4- 5/8 G4 13000 10-767A 8


Jaw x eye Jaw x Jaw eye x eye

USA IMPORT Working MinPart Pkg Chain Load Part Pkgnumber Qty Rating Limit (lbs) number Qty10-770 1 5/16 G4 - 3/8 G4 5400 N/AN/A 5/16 G4 - 3/8 G7 6600 10-770A 1210-771 1 3/8 G4 - 1/2 G4 9200 10-771A 12

Safety yellow Lever Type


SOS-BSOL-B

ALLOy STeeL CHAIn SLInGS

CO SOS

SOL

SSg

Sgg

dOS

DOS-ADOL-A

DOS-BDOL-B

DOL

dOg

TOS

TOL

TOg

QOGQOS QOL

SOS-ASOL-A

Grade 100 - Suitable for overhead lifting

OSHA Compliant

Fully certified and tagged

COnTACT SALeS FOR QUOTeSAnd ORdeRInG

What do you need to know?

1. How many legs on your sling - (1,2 3 or 4).

2. What kind of hooks you need?(grab, sling (slip) or self-locking.)

3. What size chain you need?

4. What is the reach (length) of the sling?

Slings are made to order andare nonreturnable.


Weldless ChainCOnTACT SALeS FOR QUOTeS And ORdeRInG

double Loop Single Loop Jack Chain Plumber's Chain Sash Chain Chain (single) (Safety Chain) Chain

Specialty ItemsThese items are readily available from stock.

Gr 100 Self Locking Claw Tractor drawbar

HoistClevises

Round Pin Anchor Shackle

T-Grab

Safety Anchor Shackle eye/Jaw Swivel

WebslingShackle


Part number Chain Size WLL*/lb Pkg Qty1741A 1/4 2,600 11742 5/16 3,900 11743 3/8 5,400 11745 1/2 9,200 11746 5/8 13,000 1

Clevis Grab HooksUse with Gr 30 or Gr 43 Chain

Grade 43 High-Test

5655A-BP 1/4 3,150 15656A-BP 5/16 4,700 15657A-BP 3/8 6,600 15659A-BP 1/2 11,300 15660A-BP 5/8 15,800 1

Use with Gr 30, Gr 43 or Gr 70 Chain

For Towing and Binding nOT for overhead lifting

Grade 70 Transport/Alloy

Gr 100 Alloy For Lifting

US Made non-Cradle style

Import Cradle Style

9-650 5/16 4,700 19-651 3/8 6,600 19-652 1/2 11,300 1

Use with Gr 30, Gr 43, Gr 70, or Gr 80 Chain

For Towing and Binding nOT for over-head lifting

Gr 70 Long Throat & Standard duty Safety Latch

Part Chain Pkgnumber Size WLL*/lb Qty9-649HD 1/4 3,500 19-650HD 5/16 4,500 19-651HD 3/8 7,100 19-657HD 1/2 12,000 19-658HD 5/8 18,100 1


Gr 80 Twist Lock Heavy duty Latched

Part Chain Pkgnumber Size WLL*/lb Qty5655 1/4 3,500 15656 5/16 4,500 15657 3/8 7,100 15659 1/2 12,000 15660 5/8 18,100 1

FOR IMPORT ADD AN "A" BEFORE -100

Gr 80 Alloy



FOR IMPORT ADD AN "IMP" AFTER PART NUMBER

Part Chain Pkgnumber Size WLL*/lb Qty5671-100 9/32 4,300 15672-100 3/8 8,800 15673-100 1/2 15,000 15677-100 5/8 22,600 15678-100 3/4 35,300 1

Part number Chain Size WLL*/lb Pkg Qty5860 5/16 1,900 15861 3/8 2,650 15862 1/2 4,500 1

Part number Chain Size WLL*/lb Pkg Qty5860A 5/16 4,700 15861A 3/8 6,600 15862A 1/2 11,300 1

Gr 30 Weldable Grab Hooks Gr 70 Weldable Grab Hooks


For overhead lifting

eye/Jaw Swivel


Part number Chain Size WLL*/lb Pkg Qty1748 1/4 2,600 11749 5/16 3,900 11750 3/8 5,400 11752 1/2 9,200 1

Slip HooksUse with Gr 30 or Gr 43 Chain

Grade 43 High-Test

Part Chain Pkgnumber Size WLL*/lb Qty1765-BP 1/4 3,150 11766-BP 5/16 5,350 11767-BP 3/8 6,600 11768-BP 1/2 11,300 11769-BP 5/8 15,800 1



Gr 70 Transport with Safety Latch

Gr 100 Alloy For Lifting w/Safety Latch


Part Chain Pkgnumber Size WLL*/lb Qty5871-100 9/32 4,300 15872-100 3/8 8,800 15873-100 1/2 15,000 15874-100 5/8 22,600 15875-100 3/4 25,300 1

Part Chain Pkgnumber Size WLL*/lb Qty5661 1/4 4,100 15662 5/16 5,100 15663 3/8 7,100 15665 1/2 13,000 15666 5/8 20,300 1


Gr 80 Alloy

*WARNING: do not exceed working load limit

Drop Forged. zinc Plated. Pkg. 1 eachSafety Slip & Hoist Hook Latch Repair Kits

Safety Sling Hook Latch Repair Kits

Part Hook Size Hooknumber Trade # Tons Opening**5840 2, 22 3/4 29/32"5841 3, 23 1 31/32"5842 4, 24 1½ 1-1/32"5843 5, 25 2 1-1/8"5844 6, 26 2½ 1-7/32"5845 7, 27 3 1-5/16"5846 8, 28 4 1-1/2"5847 9, 29 5 1-21/32"5848 10, 30 6 1-7/8"5849 11, 31 7 2"5850 12, 32 10 2-5/16"5852 34 15 3-5/32"

**Hook opening size is with latch installed.

for pre-drilled hooksItem no. MK655Contents: 1 of each 5840, 5841, 5842, ,5843, 5844, 5845 clearly labeled in a clear plastic 6 compartment, reusable case. Bin size 1-3/8"H x 4-1/2"D x 8-1/2"W

Item no. 16-9012Contents: 2 of each 5840 thru 5848 along with 5821 thru 5824. Clearly labeled with actual size photos for ease of organization and refill-ing. Packed in a gray steel parts bin with a 12 compartment rustproof plastic bin insert. The bin is safety latched and has a handle for easy transport to the job site. Bin size 3"H x 12"D x 18"W

For overhead lifting


Part Hooknumber Size5821 9/32 5822 3/8 5823 1/2 5824 5/8


*Safe Working Load Limit - Lbs.

The standard link for temporary or permanent chain repairs or coupling attachments. For use with proof coil chain only. Drop forged. Self-colored finish.

Part no. Chain Size W.L.L.* Pkg1712 3/16 800 101713 1/4 1,400 101714 5/16 2,000 101715 3/8 2,800 101716 7/16 3,625 101717 1/2 4,750 101718 5/8 7,250 51719 3/4 10,250 5

Fast easy connections for permanent or temporary applications with low carbon chain. Should be tightened with a wrench. zinc finish.

Part no. Trade Size W.L.L.* Pkg5684 1/8 220 105685 3/16 660 105686 1/4 880 105687 5/16 1760 105688 3/8 2220 105689 1/2 3300 5

Connecting Links

Quick Links

Chain Links

For chain repair and coupling of attachments. Low carbon steel. May be welded closed. zinc Plated.

Part no. Chain Size W.L.L.* Pkg1731 3/16 x 1 240 251732 7/32 x 1-1/4 250 251733 1/4 x 1-1/4 400 251736 1/4 x 2 400 251734 9/32 x 1-1/4 525 251737 5/16 x 1-1/2 950 251738 5/16 x 2 1000 251739 3/8 x 1-5/8 1250 251740 3/8 x 2 1250 251741 1/2 x 2-1/2 2125 101754 5/8 x 2-1/2 1000 5

Repair Links (Lap links)

An inexpensive method of repairing or connecting chains quickly. Use next size larger than chain size for additional safety factor. For use with proof coil chain only. May be welded closed. zinc Plated.

Part no. Chain Size W.L.L.* Pkg1723 3/16 750 251724 1/4 1250 251725 5/16 1900 251726 3/8 2650 251727 7/16 3500 101728 1/2 4500 101729 5/8 6900 101730 3/4 9750 10

Cold Shuts


Screw Pin Anchor Shackles Drop forged, heat treated and tempered. Alloy pins are used in all shackles for extra strength. All shackles are marked with size and working load limits in tons. Not for overhead lifting. Hot Dipped Galvanized. Pkg. 1 each

****Import is available but minimum quantities apply

Width Part Pin Between W.L.L.*number Size dia. eyes Tons 9-311 1/4 5/16 1/2 1/29-312 5/16 3/8 17/32 3/49-313 3/8 7/16 21/32 19-314 7/16 1/2 23/32 1-1/2 9-315 1/2 5/8 13/16 29-316 5/8 3/4 1-1/16 3-1/49-317 3/4 7/8 1-1/4 4-3/49-318 7/8 1" 1-7/16 6-1/29-319 1" 1-1/8 1-11/16 8-1/2 9-320 1-1/8 1-1/4 1-13/16 9-1/29-321 1-1/4 1-3/8 2-1/32 129-322 1-3/8 1-1/2 2-1/4 13-1/29-323 1-1/2 1-5/8 2-3/8 179-324 1-5/8 1-3/4 2-5/8 209-325 1-3/4 2" 2-7/8 259-326 2" 2-1/4 3-1/4 35

*Safe Working Load Limit.WARNING: Do not exceed working load limits.

Forged, heat treated and tempered for permanent or temporary use to connect high-test and proof coil chain. zinc finish. Not for overhead lifting. Truckers: On-The-Job repairs possible for your tie-down chains. Handy in the tool box to lengthen chains for special jobs.

Part Pkgno. Size W.L.L.*/lb Qty5680 1/4 or 5/16 4700 55681 3/8 6600 55682 7/16 or 1/2 11300 2

Warning: Not to be used for lifting.

Twin Clevis Links (Mid-Links)Chain Links

Approved for overhead use. Used in field for assembling chain slings. Links have rotating load pins that resist bending and offer shear values in excess of the chain. Can be disassembled by driving locking pin out with a hammer. Painted finish. Pkg. 1 each. For Import add an "A" before -100.

Part Chain W.L.L.*no. Size (Lbs.)1882-100 9/32 4,3001883-100 3/8 8,8001884-100 1/2 15,0001885-100 5/8 22,6001886-100 3/4 35,300

Grade 100 Alloy Coupling Links


Screw Pin Anchor Shackles AlloyDrop forged, heat treated and tempered. Alloy pins are used in all shackles for extra strength. All shackles are marked with size and working load limits in tons. For overhead lifting. Alloy. Pkg. 1 each

Width Part Pin Between W.L.L.*number Size dia. eyes Tons 9-329 3/8 7/16 21/32 29-330 7/16 1/2 3/4 2-5/8 9-331 1/2 5/8 13/16 3-1/39-332 5/8 3/4 1-1/16 59-333 3/4 7/8 1-1/4 7

Screw Pin Anchor Shackles Stainless SteelDrop forged, heat treated and tempered. Alloy pins are used in all shackles for extra strength. All shackles are marked with size and working load limits in tons. Not for overhead lifting. Stainless Steel. Pkg. 1 each

Width Part Pin Between W.L.L.*number Size dia. eyes lbs 9-010 5/32 5/32 11-32 3509-000 3/16 1/4 3/8 6509-001 1/4 5/16 15/32 1,3009-002 5/16 3/8 1/2 1,5009-003 3/8 7/16 5/8 2,000S0116FS12 7/16 1/2 3/4 2,000 9-004 1/2 5/8 7/8 3,0009-005 5/8 3/4 1-1/16 4,0009-006 3/4 7/8 1-3/16 6,0009-007 7/8 1" 1-1/2 8,0009-008 1" 1-1/8 1-5/8 10,000

Oblong Master Link Alloy Gr 80 Part Inside Inside W.L.L.*number Size Width Length lbs 5853 1/2 2.5 5.00 6,1005854 3/4 2.75 5.50 12,300 5855 1" 3.50 7.00 20,8005865 1-1/4 4.38 8.75 31,300

Sling Replacement Tag- Heavy Gage (0.123") - zinc Plated Steel- 1-1/4" hole diameter- 2-1/8" x 4-1/2"Part number: 5859

Chain Links

SUITABLe FOR OVeRHeAd LIFTInG


Wire Rope (Aircraft Cable)

Malleable Wire Rope ClipsStandard clip for light duty applications.

Part Cable Pkgnumber Size Qty1684 1/16 251685 1/8 251686 3/16 251687 1/4 101688 5/16 10

Wire Rope Clips (Cable Clamps)

drop Forged Wire Rope ClipsDrop forged steel for heavy duty applications.

Part Cable Pkgnumber Size Qty1985 1/8 101986 3/16 101987 1/4 101988 5/16 101989 3/8 10

Part Safe Working Feetnumber Size Type Load Limit1/lb /ReelVInyL COATed Size does not include vinyl coating. 5830 3/32 7 x 7 184 2505831 1/8 7 x 7 340 2505832 3/16 7 x 19 840 2505833 1/4 7 x 19 1400 200

Part Cable Pkgnumber Size Qty1689 3/8 101691 1/2 101693 5/8 101694 3/4 101695 7/8 51696 1" 5

Galvanized cable in 7 x 7 or extra flexible 7 x 19 construction, as illustrated. It is high-strength, aircraft quality. Vinyl coated is more resistant to abrasion and weathering; it can also be cleaned easily***ONLY SOLD BY THE REEL*** Part Safe Working Feetnumber Size Type Load Limit1/lb /ReelUnCOATed5834 1/16 7 x 7 96 5005835 3/32 7 x 7 184 5005836 1/8 7 x 7 340 5005837 3/16 7 x 19 850 2505838 1/4 7 x 19 1400 2505839 3/8 7 x 19 2880 250

Part Cable Pkgnumber Size Qty1991 1/2 101993 5/8 101994 3/4 101995 7/8 51996 1" 51998 1-1/4 2

FerrulesPart number Size Pkg10-538 1/16" 5010-539 3/32" 5010-540 1/8" 5010-541 5/32" 5010-542 3/16" 5010-543 1/4" 50

Aluminum Cable Ferrules & Stops

Stops Part number Size Pkg10-544 1/16" 5010-545 3/32" 5010-546 1/8" 5010-547 5/32" 5010-548 3/16" 5010-549 1/4" 50

Wire Rope Thimbles Cable Regular Heavy PkgSize duty (Zinc) duty (Galv) Qty1/8 1700 - 103/16 1701 - 101/4 1702 2002 10

Cable Regular Heavy PkgSize duty (Zinc) duty (Galv) Qty5/16 1703 2003 103/8 1704 2004 101/2 1705 2005 10


Part Takeno. Size Up5735 3/8-16 6"5736 1/2-13 6"5737 1/2-13 9"5738 1/2-13 12"5739 5/8-11 6" 5740 5/8-11 12" 5741 3/4-10 6" 5742 3/4-10 9" 5743 3/4-10 12"

drop Forged Steel Turnbuckles

Cuts steel and stainless steel wire rope, aircraft cable, copper and aluminum wire, and small iron rod. Sharp hardened (60 HRC) precision ground cutting edges are factory tested. Angular blades designed for clean cutting of wire, ropes, and steel cables without crushing or fraying ends. Material: special tool steel, oil-hardened. Ergonomic design. Overall length: 7½". Plastic coated handles. Made in Germany. Cutting capacity: wire and cable to 1/4", steel rod to 3/16". Limited lifetime warranty. Part no. 10-395

Wire Rope Cutter

Wire Rope Swaging ToolThis powerul tool crimps ferrule and stops in sizes 1/16, 3/32, 1/8, 5/32 and 3/16". Overall length: 25".

Part no. 10-396

Aluminum Turnbuckles eye & eyePart number Size Closed Open5777 8/32 3-3/8" 4-5/8"5778 10-24 4" 5-5/8"5779 12-24 4-1/2" 6-3/8"5780 1/4 5-1/2" 7-5/8"5781 5/16-18 6-3/4" 9-1/4"5782 3/8-16 7-1/2" 10-1/2"

Part Takenumber Size Closed Open5783 8/32 3-3/8" 4-5/8"5784 10-24 4" 5-5/8"5785 12-24 4-1/2" 6-3/8"5786 1/4 5-1/2" 7-5/8"5787 5/16-18 6-3/4" 9-1/4"5788 3/8-16 7-1/2" 10-1/2"

Aluminum Turnbuckles Hook & eye

Eye & EyeC-1035 high carbon steel

Self-colored finish • Pkg. 1 each available in Hot Galv Finish

Aluminum body. zinc finished steel eyebolts & hooks. Pkg. 10 each

Aluminum body. zinc finished steel eyebolts & hooks. Pkg. 10 each


Bolt SnapsSwivel eye Bolt SnapPart number A B C5751 1/2 3-1/8 3/85752 5/8 3-1/4 3/85754 7/8 3-1/2 3/8

double end Bolt SnapPart number B C5761 - 3-3/8 1/45762 - 4" 3/85763 - 4-3/4 3/8

Open end Bolt SnapIf metal is cold, heat with match or lighter, then tap lightly to shut. Do not attempt to close by squeezing.

Part number A B C5757 1/4 2-3/8 7/325758 3/8 3-1/8 3/85759 1/5 4" 3/85760 5/8 6" 1/2

Swivel Rope SnapPart number A B C5772 1" 4-1/8 1/4

Ratchet Straps1" x 16 FT RATCHeT TIe-dOWnFor small loads. S-hooks are heat-treated and vinyl coated. Working load limit: 400 pounds. Breaking strength. 1,200 lbs. Part number 10-720B 10/ctn

2" x 27 FT RATCHeT STRAP W/ FLAT HOOKS

Wide style handle. Meets CVSA guidelines. Fixed end length is 18". Working load limit: 3,335 lbs. Breaking strength: 10,000 lbs.

Part number 10-713 10/ctn

3" x 27 FT RATCHeT STRAP W/ FLAT HOOKSLong handle style. Meets most types of flatbed tie-down requirements. Fixed end length is 18". Working load limit: 5,000 lbs. Breaking strength: 15,000 lbs. Part number 10-712 5/ctn

Rubber Tarp Straps & Rope GOLdLIne BRAndPart number Length Range Pkg Qty05-001 10" 15-20" 5005-002 15" 20-30" 5005-003 21" 30-40" 5005-004 31" 40-50" 50Rope Size Length Pkg Qty05-006 7/16" 150' 105-009 3/8" 150' 105-007-100 Wire Hook 100

5/pkg

5/pkg

5/pkg

5/pkg


Single Strand Riveted ChainHardened Steel • ANSI Standard Series

Part AnSI Pitch Width number no. (P) (W)12-361 35 3/8 3/1612-362 40 1/2 5/1612-363 41 1/2 1/412-364 50 5/8 3/812-365 60 3/4 1/212-366 80 1" 5/812-367 100 1-1/4 3/412-390 120 1-1/2 1"12-391 140 1-3/4 1"12-392 160 2" 1-1/4

304 Series Stainless SteelSingle Strand Chain

Part MFR.* Pitch Widthnumber no. (P) (W)12-497 40SS 1/2 5/1612-498 50SS 5/8 3/812-499 60SS 3/4 1/2

Roller Chain(Sprocket Chain)Hardened steel with solid rollers. One connecting link included on each roll. Pkg: 1 ROLL (10 feet per roll)

P

W

AnSI Heavy SeriesHardened Steel • Heavy Duty Single Strand Chain

Part AnSI Pitch Widthnumber no. (P) (W)12-394 60-H 3/4 1/212-395 80-H 1" 5/8

P

W

*Trade reference number - not ANSI number

Roller Chain Tools

Roller Chain Puller Works like a third hand to help you insert and remove connecting links. Allows roller chain to be pulled or released without dropping parts in the dirt or readjusting sprockets. Knurled adjustment screw. Import.

Part no. Jaw Spread Chain Size12-389 2" 35 thru 60

Larger roller chain tools available on request.

Roller Chain Breakers Takes roller chain apart easily without hammers or grinders. All parts are hardened for long life. Tool comes with two replaceable punch points. Import.

Tool Replacement ForPart no. Punch Points* Chain Size12-386 12-386RP 35 thru 5012-387 12-387RP 60 thru 100

drive Type Chain(Double Pitch, Extended Pitch)

Hardened Steel

Part AnSI Pitch Width number no. (P) (W)12-396 A-2040 1" 5/1612-397 A-2050 1-1/4 3/812-398 A-2060 1-1/2 1/2


Roller Chain Links

Note: Use no more than two repair links in any length of chain.

"Connecting Links" are also called "Master Links."

"Offset Links" are also called "Half Links"

Part AnSI Pitch Pkgnumber no. “P” Qty12-368 35 3/8 1012-369 40 1/2 1012-370 41 1/2 1012-371 50 5/8 1012-372 60 3/4 1012-373 80 1" 512-481 40-2 1/2 1012-435 50-2 5/8 1012-436 60-2 3/4 1012-443 60-H 3/4 1012-444 80-H 1" 512-375 A-2040 1" 1012-376 A-2050 1-1/4 1012-377 A-2060 1-1/2 10

Part AnSI Pitch Pkgnumber no. “P” Qty12-506 35 3/8 1012-507 40 1/2 1012-508 41 1/2 1012-509 50 5/8 1012-510 60 3/4 1012-511 80 1" 512-512 100 1-1/4 512-513 120 1-1/2 5

Roller Links

Spring Clip Connecting Links

Part AnSI Pitch Pkgnumber no. “P” Qty12-379 35 3/8 1012-380 40 1/2 1012-381 41 1/2 1012-382 50 5/8 1012-383 60 3/4 1012-384 80 1" 512-385 100 1-1/4 512-447 120 1-1/2 512-448 140 1-3/4 112-449 160 2" 112-450 200 2-1/2 112-451 35-2 3/8 1012-452 40-2 1/2 1012-453 50-2 5/8 1012-454 60-2 3/4 1012-455 80-2 1" 512-456 100-2 1-1/4 512-457 120-2 1-1/2 512-458 140-2 1-3/4 1

304 Series Stainless Steel other sizes and styles also available in StainlessPart AnSI Pitch Pkgnumber no. “P” Qty12-500 40SS* 1/2 1012-501 50SS* 5/8 1012-502 60SS* 3/4 10*S/S Trade reference number - not ANSI number

Offset Links

Part AnSI Pitch Pkgnumber no. “P” Qty12-459 160-2 2" 112-460 200-2 2-1/2 112-461 60-H 3/4 1012-462 80-H 1" 512-465 A-2040 1" 1012-466 A-2050 1-1/4 1012-467 A-2060 1-1/2 10

304 Series Stainless Steel other sizes and

styles also available in StainlessPart AnSI Pitch Pkgnumber no. “P” Qty12-503 40SS* 1/2 1012-504 50SS* 5/8 1012-505 60SS* 3/4 10*S/S Trade reference number - not ANSI number


Section 12 Cutting Tools Index

A

Adapters"A" Taper Drill Bit 10

ArborsHole Saw 19

Assortments/KitsBurs, Carbide 11Car Reamers 7Carbide Burs 11Drill Set, 1/2" Shank Brute 6Drill Set, 3/8" Shank 6Drill Set, Aircraft 2Drill Set, Brute 2Drill Set, Cobalt 3Drill Set, Left Hand 8Drill Set, Letter Gauge 4Drill Set, LH with Extractors 10Drill Set, Sheeters 7Drill Set, Wire Gauge 4Hole Saw Sets 19Screw Extractors w/drills 8Tap & Die Sets 13Tap-Drill Sets 13

B

BladesHack Saw 16Jig/Sabre 17Reciprocating Saw 16

C

Cabinets, Drill 15Car Reamers 7Chuck Key Holder 11Chuck Keys, Drill 11Countersinks 5

d

Die Stocks 14Dies 14Dispensers

Drill Bit 15Drift Pins 10Drill

Adapters 10Chuck Keys 11Dispensers 15Drift Pins 10Index Cases 15Key Holder 11Saw (Combination) 10Sharpeners 15

Drill Saw 10Drill Sharpener 15Drill Tap 10Drill-Out Power Extractors 9Drills

A Taper Chuck & Adapters 10

Aircraft Extension 5Brute 6Carbide Tipped 9, 10Cobalt 3Comb. Drill/Tap 10Concrete 9, 10Concrete Screw 9Double End 7Extension 5Extra Long 5Hole Saw Pilot 19Jobber 5Left Hand 8Letter Gauge 4Masonry Hammer 9, 10

Concrete Screws 9Mechanics Length 8Multi-Step 3Number 4, 5Reduced Shank 6Screw Machine 7Sheeters 7Short 7Silver & Deming 6Standard Aircraft 2Step 3Stubby 7Tap 10Taper Chuck & Adapters 10Taper Length 5Unibit style 3Wire Gauge 4, 5

e

E-z Outs 9Extensions, Hole Saw 19Extractors

Screw 9

F

FilesThread Restoring 14

Frames, Hack Saw 16, 17

H

Hack SawBlades 16Frames 16, 17

HandlesDie 14Tap 13

Hole Saw Sets 19Hole Saws & Arbors 18

I

Index Cases, Drill 15

J

Jacobs Keys 11Jig Saw Blades 17

K

Key Holder 11Keys

Drill Chuck 11

M

MasonryHammer Drills 9

R

Reamer Wrench, Tap and 13Reamers, Car 7Reciprocating Saw Blades 16

S

Sabre Saw Blades 17Saw Blades 16Saw, Hole 18Saw-Drill 10Saw-zall Blades 16Screw Extractors 9

T

Tap & Die Sets 13Tap Wrenches 13Tap-Drill Sets 13Taps

Brute 11Combination Drill/Tap 10Fractional 12High Speed 12Pipe 13Sets

3 Piece 11Spiral Point, Brute 11Wrenches 13

ThreadFiles 14

ToolsDie Stocks 14Hacksaw Frames 16, 17Tap Wrenches 13Thread Files 14

W

WrenchesTap 13

12-II FAX:(219)-696-6413 • www.mpi-online.com • [email protected]


Heavy duty Jobbers drillsStraight Shank, 135° Split Point, Steam Oxide

Treated, HSSMeets NAS 907-B specifications

Heavy duty 135 split point for self centering and quick penetration. Heavy duty we geometry provides add rigidity. Recommended for drilling high tensile martensitic stainless steels, titanium alloys and hard steel. Very popular in truck and trailer manufacturing.Part Flute Overall Pkgno. diameter Length Length Qty1274• 1/64 3/16 3/4 121275• 1/32 1/2 1-3/8 121276• 3/64 3/4 1-3/4 121277 1/16 7/8 1-7/8 121278 5/64 1" 2" 121279 3/32 1-1/4 2-1/4 121280 7/64 1-1/2 2-5/8 121281 1/8 1-5/8 2-3/4 121282 9/64 1-3/4 2-7/8 121283 5/32 2" 3-1/8 121284 11/64 2-1/8 3-1/4 121285 3/16 2-5/16 3-1/2 121286 13/64 2-7/16 3-5/8 121287 7/32 2-1/2 3-3/4 121288 15/64 2-5/8 3-7/8 121289 1/4 2-3/4 4" 121290 17/64 2-7/8 4-1/8 121291 9/32 2-15/16 4-1/4 121292 19/64 3-1/16 4-3/8 61293 5/16 3-3/16 4-1/2 61294 21/64 3-5/16 4-5/8 61295 11/32 3-7/16 4-3/4 61296 23/64 3-1/2 4-7/8 61297 3/8 3-5/8 5" 61298 25/64 3-3/4 5-1/8 61299 13/32 3-7/8 5-1/4 61300 27/64 3-15/16 5-3/8 61301 7/16 4-1/16 5-1/2 61302 29/64 4-3/16 5-5/8 61303 15/32 4-5/16 5-3/4 61304 31/64 4-3/8 5-7/8 61305 1/2 4-1/2 6" 6

• Sizes up to 3/64" have 118° standard point, not split point.

15 PC. AIRCRAFT dRILL SeT 1/16 TO 1/2 BY 32THS, STRAIGHT SHANK

PART nO. 6006 (INDEX #5970)





Heavy duty Straight Shank drillsM-7 Molybdenum High Speed Steel,

nOMO Surface Treatment, 135° Split Point Meets NAS 907 Type J specifications

Unique web geometry especially useful in portable drilling of stainless steel, titanium alloys, and other hard to drill materials. Steel erection, mining, heavy construction, used in a wide rage of manufacturing plants, vehicle, railway and dockyard maintenance.Part Flute Overall Pkgno. diameter Length Length Qty1245 1/16 7/8 1-7/8 121246 5/64 1" 2" 121247 3/32 1-1/4 2-1/4 121248 7/64 1-1/2 2-5/8 121249 1/8 1-1/2 2-3/4 121250 9/64 1-3/4 2-7/8 121251 5/32 2" 3-1/8 121252 11/64 2-1/8 3-1/4 121253 3/16 2-5/16 3-1/2 121254 13/64 2-7/16 3-5/8 121255 7/32 2-1/2 3-3/4 121256 15/64 2-5/8 3-7/8 121257 1/4 2-3/4 4" 121258 17/64 2-7/8 4-1/8 121259 9/32 2-15/16 4-1/4 121260 19/64 3-1/16 4-3/8 61261 5/16 3-3/16 4-1/2 61262 21/64 3-5/16 4-5/8 61263 11/32 3-7/16 4-3/4 61264 23/64 3-1/2 4-7/8 61265 3/8 3-5/8 5" 61266 25/64 3-3/4 5-1/8 61267 13/32 3-7/8 5-1/4 61268 27/64 3-3/4 5-3/8 61269 7/16 4-1/16 5-1/2 61270 29/64 4-3/16 5-5/8 61271 15/32 4-5/16 5-3/4 61272 31/64 4-3/8 5-7/8 61273 1/2 4-1/2 6" 6

7 PC. BRUTe dRILL SeT 1/16 TO 1/4 BY 32THS, STRAIGHT SHANK IN

PLASTIC POUCH. PART nO. 5996

15 PC. BRUTe dRILL SeT 1/16 TO 1/2 BY 32THS, STRAIGHT SHANK







PART nO. 1499TW

drill Bits

12-2 FAX:(219)-696-6413 • www.mpi-online.com • [email protected]

Cobalt drills

Straight Shank, Jobbers LengthMeets NAS 907 Type J specifications. 135° split point

Designed for drilling high tensile alloys, high nickel stainless steels, and other "hard to machine" metals. Manufactured from M42 cobalt steel, these drills withstand the heat generated when drilling high tensile materials. Extra heavy web geometry gives this drill extreme rigidity, requiring greater feed pressure to penetrate. Special gold-oxide chrome surface treatment reduces friction and temperature extremes. Recommended for use in fixed applications (drill presses) only.

135° split point.No center-punching required.

29 PC. COBALT dRILL SeT 1/16 TO 1/2 BY 64THS, STRAIGHT SHANK


Part Flute Overall Pkgno. diameter Length Length Qty6011 1/16 7/8 1-7/8 126012 5/64 1" 2" 126013 3/32 1-1/4 2-1/4 126014 7/64 1-1/2 2-5/8 126015 1/8 1-5/8 2-3/4 126016 9/64 1-3/4 2-7/8 126017 5/32 2" 3-1/8 126018 11/64 2-1/8 3-1/4 126019 3/16 2-5/16 3-1/2 126020 13/64 2-7/16 3-5/8 126021 7/32 2-1/2 3-3/4 126022 15/64 2-5/8 3-7/8 126023 1/4 2-3/4 4" 126024 17/64 2-7/8 4-1/8 126025 9/32 2-15/16 4-1/4 126026 19/64 3-1/16 4-3/8 66027 5/16 3-3/16 4-1/2 66028 21/64 3-5/16 4-5/8 66029 11/32 3-7/16 4-3/4 66030 23/64 3-1/2 4-7/8 66031 3/8 3-5/8 5" 66032 25/64 3-3/4 5-1/8 66033 13/32 3-7/8 5-1/4 66034 27/64 3-15/16 5-3/8 66035 7/16 4-1/16 5-1/2 66036 29/64 4-3/16 5-5/8 66037 15/32 4-5/16 5-3/4 66038 31/64 4-3/8 5-7/8 66039 1/2 4-1/2 6" 6

drill Gauge Plates

Hardened steel, satin chrome finish. Offers a quick and accurate method of checking drill and rod sizes.

Part no. Size Range Pkg10-550 #1 - #60 110-551 1/16" - 1/2" by 64ths 110-552 A - z 110-553 1.0 - 5.9 mm 110-554 1.5 - 12.5 mm 1

Self-starting points. Made from M-2 high speed steel. Drills and reams multiple size holes in steel, copper, aluminum, plastic, wood and drywall. Does the job of up to 13 individual drill bits. Perfect for enlarging existing holes. Pkg: 1 each.

To drill the desired hole size use a washer as a stop or count the steps as the drill penetrates the work. To double the cutting depth drill from both sides of the material.

Max. Min. no. Part Hole Hole Incre- of Shank Stepno. Size Size ment Sizes Size Thick. Fig.1521 1/2" 1/8" 1/32" 13 1/4" 1/8" A1522 1/2" 3/16" 1/16" 6 1/4" 3/8" B1523 3/4" 1/4" 1/16" 9 3/8" 1/8" C1096 7/8" 3/16" 1/16' 12 3/8" 1/8" D1097 1-1/8" 7/16" 1/16" 12 3/8" 1/8" -1099 1-1/2" 1/4" 1/8" 11 1/2" 1/8" -

A B C d

Multi-Step drills(Pictures not actual size)

drill Bits


BruteTM Platinum with NOMO® surface treatment. Straight shank, jobbers length. 135° split points - no center punching required.Part diameter Flute Overall Pkgno. Letter decimal Length Length Qty1017 A .2340 2-5/8 3-7/8 121018 B .2380 2-3/4 4" 121019 C .2420 2-3/4 4" 121020 D .2460 2-3/4 4" 121021 E .2500 2-3/4 4" 121022 F .2570 2-7/8 4-1/8 121023 G .2610 2-7/8 4-1/8 121024 H .2660 2-7/8 4-1/8 121025 I .2720 2-7/8 4-1/8 121026 J .2770 2-7/8 4-1/8 121027 K .2810 2-15/16 4-1/4 121028 L .2900 2-15/16 4-1/4 121029 M .2950 3-1/16 4-3/8 61030 N .3020 3-1/16 4-3/8 61031 O .3160 3-3/16 4-1/2 61032 P .3230 3-5/16 4-5/8 61033 Q .3320 3-7/16 4-3/4 61034 R .3390 3-7/16 4-3/4 61035 S .3480 3-1/2 4-7/8 61036 T .3580 3-1/2 4-7/8 61037 U .3680 3-5/8 5" 61038 V .3770 3-5/8 5" 61039 W .3860 3-3/4 5-1/8 61040 X .3970 3-3/4 5-1/8 61041 Y .4040 3-7/8 5-1/4 61042 z .4130 3-7/8 5-1/4 6

Letter Gauge Wire Gauge

BruteTM Platinum with NOMO® surface treatment.Straight shank, jobbers length. 135° split points. Pkg: 12 each

Part Wire decimal Flute Overallno. Size Size Length Length1043 1 .2280 2-5/8 3-7/81044 2 .2210 2-5/8 3-7/81045 3 .2130 2-1/2 3-3/41046 4 .2090 2-1/2 3-3/41047 5 .2055 2-1/2 3-3/41048 6 .2040 2-1/2 3-3/41049 7 .2010 2-7/16 3-5/81050 8 .1990 2-7/16 3-5/81051 9 .1960 2-7/16 3-5/81052 10 .1935 2-7/16 3-5/81053 11 .1910 2-5/16 3-1/21054 12 .1890 2-5/16 3-1/21055 13 .1850 2-5/16 3-1/21056 14 .1820 2-3/16 3-3/81057 15 .1800 2-3/16 3-3/81058 16 .1770 2-3/16 3-3/81059 17 .1730 2-3/16 3-3/81060 18 .1695 2-1/8 3-1/41061 19 .1660 2-1/8 3-1/41062 20 .1610 2-1/8 3-1/41063 21 .1590 2-1/8 3-1/41064 22 .1570 2" 3-1/81065 23 .1540 2" 3-1/81066 24 .1520 2" 3-1/81067 25 .1495 1-7/8 3"1068 26 .1470 1-7/8 3"1069 27 .1440 1-7/8 3"1070 28 .1405 1-3/4 2-7/81071 29 .1360 1-3/4 2-7/81072 30 .1285 1-5/8 2-3/41073 31 .1200 1-5/8 2-3/41074 32 .1160 1-5/8 2-3/41075 33 .1130 1-1/2 2-5/81076 34 .1110 1-1/2 2-5/81077 35 .1100 1-1/2 2-5/81078 36 .1065 1-7/16 2-1/21079 37 .1040 1-7/16 2-1/2976 38 .1015 1-7/16 2-1/21081 39 .0995 1-3/8 2-3/81082 40 .0980 1-3/8 2-3/81083 41 .0960 1-3/8 2-3/81084 42 .0935 1-1/4 2-1/41085 43 .0890 1-1/4 2-1/41086 44 .0860 1-1/8 2-1/81087 45 .0820 1-1/8 2-1/81088 46 .0810 1-1/8 2-1/81089 47 .0785 1" 2"977 48 .0760 1" 2"1091 49 .0730 1" 2"1092 50 .0700 1" 2"1093 51 .0670 1" 2"1094 52 .0635 7/8 1-7/8

60 PC. BRUTe WIRe GAUGe dRILL SeT SIzES 1 TO 60, STRAIGHT SHANKS


26 PC. BRUTe LeTTeR GAUGe dRILL SeT SIzES A TO z, STRAIGHT SHANKS


BruteTM Aircraft drills


Three-flute countersinks are a good choice for fixed and portable operations. Chatter-free performance with less chipping than single-flute countersinks. Used for countersinking, deburring and chamfering operations. High speed steel.

Wire Gauge SizeJobbers Length drills

Straight shanks. High speed steel. Black oxide surface treatment. 135° or 118° standard points. Pkg: 12 each

Part Flute Overallnumber Wire decimal Length Length1427• 53 .0595 7/8 1-7/81428• 54 .0550 7/8 1-7/81429• 55 .0520 7/8 1-7/81430• 56 .0465 3/4 1-3/41431• 57 .0430 3/4 1-3/41432• 58 .0420 11/16 1-5/81433• 59 .0410 11/16 1-5/81434• 60 .0400 11/16 1-5/850-139 61 .0390 11/16 1-5/850-140 62 .0380 5/8 1-1/250-141 63 .0370 5/8 1-1/250-142 64 .0360 5/8 1-1/250-143 65 .0350 5/8 1-1/250-144 66 .0330 1/2 1-3/850-145 67 .0320 1/2 1-3/850-146 68 .0310 1/2 1-3/850-147 69 .0292 1/2 1-3/850-148 70 .0280 3/8 1-1/450-149 71 .0260 3/8 1-1/450-150 72 .0250 5/16 1-1/850-151 73 .0240 5/16 1-1/850-152 74 .0225 1/4 1"50-153 75 .0210 1/4 1"50-154 76 .0200 3/16 7/850-155 77 .0180 3/16 7/850-156 78 .0160 3/16 7/850-157 79 .0145 1/8 3/450-158 80 .0135 1/8 3/4

• Sizes 53 to 60 have 135° standard point, all others are 118° standard point (no split points).

Three-Flute 82° Countersinks

Part number Body Size Shank dia6084 3/8" (.3750) 1/46085 1/2" (.5000) 3/86086 5/8" (.6250) 3/86087 3/4" (.7500) 1/26088 1" (1.0000) 1/2

Large Straight Shank Twist drills(Taper Length Drills)

High speed steel, straight shank.118° standard point, surface treated. Pkg: 1 each

Part Flute Overallnumber diameter Length Length1307 17/32 4-3/4 8"1309 9/16 4-7/8 8-1/41311 19/32 4-7/8 8-3/41313 5/8 4-7/8 8-3/41315 21/32 5-1/8 9"1317 11/16 5-3/8 9-1/41319 23/32 5-5/8 9-1/21321 3/4 5-7/8 9-3/41323 25/32 6" 9-7/81325 13/16 6-1/8 10"1327 27/32 6-1/8 10"1329 7/8 6-1/8 10"1331 29/32 6-1/8 10"1333 15/16 6-1/8 10-3/41335 31/32 6-3/8 11"1337 1" 6-3/8 11"

High Speed Steel. 135° split point. No center punching required. Bright finish.

Part Flute Pkgnumber dia. Length Length Qty1225 3/16 12" 2-5/16 11226 1/4 12" 2-3/4 11227 5/16 12" 3-3/16 11228 3/8 12" 3-5/8 11229 7/16 12" 4-1/16 11230 1/2 12" 4-1/2 1

Aircraft extension drills

Other lengths and diameters available upon request.

drill Bits


29 PC. BRUTe 3/8" SHAnK dRILL SeT1/16 TO 1/2 BY 64THS

1/16" TO 3/8" ARE STRAIGHT SHANK,25/64" TO 1/2" ARE 3/8" REDUCED SHANK


Reduced Shank Twist drills

1/4" Reduced Shank118° standard point, high speed steel.

Part Flute Overall Pkgno. diameter Length Length Qty1338 17/64 2-1/8 3-1/2 61339 9/32 2-3/16 3-9/16 61340 19/64 2-5/16 3-11/16 61341 5/16 2-7/16 3-13/16 61342 21/64 2-1/2 3-15/16 61343 11/32 2-9/16 4" 61344 23/64 2-11/16 4-1/8 61345 3/8 2-13/16 4-1/4 61346 25/64 3-3/4 5-1/8 61347 13/32 3-7/8 5-1/4 61348 27/64 3-15/16 5-3/8 61349 7/16 4-1/16 5-1/2 61350 29/64 4-3/16 5-5/8 61351 15/32 4-5/16 5-3/4 61352 31/64 4-3/8 5-4/8 61353 1/2 4-1/2 6" 6

3/8" Reduced Shank118° Standard Point, High Speed Steel

Part Flute Overall Pkgno. diameter Length Length Qty1100 25/64 3-1/4 5-1/8 61101 13/32 3-7/8 5-1/4 61102 27/64 3-15/16 5-3/8 61103 7/16 4-1/16 5-5/8 61104 29/64 4-3/16 5-5/8 61105 15/32 4-5/16 5-3/4 61106 31/64 4-3/8 5-7/8 61107 1/2 4-1/2 6" 6

BruteTM Silver & deming drills

1/2" reduced shanks. Abrasion and heat resistant M-7 molybdenum high speed steel. Short ridgid design. Drills tough, hard-to-cut materials. Special black and chrome finish extends life. 118° split point - no center punching required. Made in U.S.A.

Part Flute Overall Pkgno. diameter Length Length Qty1525 33/64 3-1/8 6" 11526 17/32 3-1/8 6" 11527 35/64 3-1/8 6" 11528 9/16 3-1/8 6" 11529 37/64 3-1/8 6" 11530 19/32 3-1/8 6" 11531 39/64 3-1/8 6" 11532 5/8 3-1/8 6" 11533 41/64 3-1/8 6" 11534 21/32 3-1/8 6" 11535 43/64 3-1/8 6" 11536 11/16 3-1/8 6" 11537 45/64 3-1/8 6" 11538 23/32 3-1/8 6" 11539 47/64 3-1/8 6" 11540 3/4 3-1/8 6" 11541 49/64 3" 6" 11542 25/32 3" 6" 11543 51/64 3" 6" 11544 13/16 3" 6" 11545 53/64 3" 6" 11546 27/32 3" 6" 11547 55/64 3" 6" 11548 7/8 3" 6" 11549 57/64 3" 6" 11550 29/32 3" 6" 11551 59/64 3" 6" 11552 15/16 3" 6" 11553 61/64 3" 6" 11554 31/32 3" 6" 11555 63/64 3" 6" 11556 1" 3" 6" 11557 1-1/16 3" 6" 1

8 PC. BRUTeTM SILVeR & deMInG dRILL SeT 9/16 TO 1" BY 16THS, 1/2" SHANK


(LARGER SETS ALSO AvAILABLE)

drill Bits


High Spiral Car Reamers

1/2" Shank with Safety Collar, 5 Fluted Left Hand Spiral, Right Hand Cut, 8° Taper Lead, 30° Helix

Angle, Premium M2 High Speed Steel

Specially designed for enlarging, aligning and deburring holes in automotive chassis, structural steel and thin free machining steels. The short length makes it very useful in cramped quarters. Designed for cutting various types of metals including mild and surface hardened steel, 4140 steel and cast iron. A safety collar stop prevents over penetration and injury to the operator. PilotPart Flute Overall Hole Pointno. Size Length Length Size dia6801* 3/8 3-1/4 4-3/4 1/4 .2306802* 7/16 3-1/4 4-3/4 9/32 .2451219 1/2 3-3/8 5-3/4 5/16 .2626803 9/16 3-3/8 5-3/4 11/32 .3201220 5/8 3-7/8 6-3/16 3/8 .3506804 11/16 3-7/8 6-3/16 7/16 .4001221 3/4 4-1/4 6-3/4 1/2 .4126805 13/16 4-1/4 6-3/4 9/16 .4901222 7/8 4-7/8 7-1/8 5/8 .5286806 15/16 4-7/8 7-1/8 5/8 .5951223 1" 5" 7-3/16 3/4 .620

* 3/8 reamers have a 3/8" shank. 7/16" reamers have a 7/16" shank. All other reamers have a 1/2" shank.

3 PC. CAR ReAMeR SeT 1/2" , 5/8" AND 3/4" DIA., 1/2"

SHANKIN WOOD BOX. PART nO. 1224

(MASTER SETS ALSO AvAILABLE)

double end Sheeters drills

Premium high speed steel, black oxide surface treat-ment, fast penetrating 135° split point. Designed for maximum cost savings per hole.

Part Overall Pkgno. Size Length Qty1214 1/8 2" 121215 5/32 2-3/16 121216 3/16 2-1/4 121217 7/32 2-1/2 121218 1/4 2-1/2 12

FRACTIOnAL SIZeS Part Flute Overall Pkgno. Size Length Length Qty1122 3/64 1/2 1-3/8 121123 1/16 5/8 1-5/8 121124 5/64 11/16 1-11/16 121125 3/32 3/4 1-3/4 121200 7/64 13/16 1-13/16 121201 1/8 7/8 1-7/8 121202 9/64 15/16 1-15/16 121203 5/32 1" 2-1/16 121204 11/64 1-1/16 2-1/8 121205 3/16 1-1/8 2-3/16 121126 13/64 1-3/16 2-1/4 121206 7/32 1-1/4 2-3/8 121127 15/64 1-5/16 2-7/16 121207 1/4(E) 1-7/16 2-5/8 121128 17/64 1-7/16 2-5/8 121129 9/32 1-1/2 2-11/16 121130 19/64 1-9/16 2-3/4 61131 5/16 1-5/8 2-13/16 61132 21/64 1-11/16 2-15/16 61133 11/32 1-11/16 3" 61134 23/64 1-3/4 3-1/16 61135 3/8 1-13/16 3-1/8 61136 25/64 1-7/8 3-1/4 61137 13/32 1-15/16 3-5/16 61138 27/64 2" 3-3/8 61139 7/16 2-1/16 3-7/16 61140 29/64 2-1/8 3-9/16 61141 15/32 2-1/8 3-5/8 61142 31/64 2-3/16 3-11/16 61143 1/2 2-1/4 3-3/4 6SIZeS FOR BLInd RIVeTSPart Wire For Overall Pkgno. Size Rivet dia. Length Qty1213 30 1/8 1-15/16 121144 20 5/32 2-1/4 121211 11 3/16 2-1/4 121145 F 1/4 2-5/8 12

Sheeters drills(Stubby or Screw Machine drills)

Premium high speed steel, black oxide surface treat-ment, fast penetrating 135° split point. Rigid design for the automotive and metal building trade. Recommended for sheet metal, truck bodies and mobile home bodies. Also used in screw machine set-ups where spindle clearance is limited.

29 PC. HSS SHeeTeRS dRILL SeT 1/16 TO 1/2 BY 64THS, RIGHT HAND, STRAIGHT

SHANKS. PART nO. 5986 (INDEX #6003)

drill Bits


With Flatted Shanks*3/8 Reduced Shanks**Special High Speed Steel135°split points, no centerpunching required

Designed specifically for small drills (3/8" and smaller drill chucks) for use in maintenance applications. Shorter than the jobbers length drill, the mechanics length drill provides better rigidity, yet it is longer thana screw machine length drill for extra depth. Three machined flats on the drill shank provide a positive chuck-grip to help eliminate slippage*. Features heavy duty web geometry to minimize drill breakage, special black oxide surface treatment promotes cooler cutting. Applications: Medium and high strength steels, high tensile martensitic stainless steels and titanium alloys.

Part Flute Overall Pkgno. diameter Length Length Qty2100 1/16 7/8 1-7/8 122101 5/64 1" 2" 122102 3/32 1-1/4 2-1/4 122103 7/64 1-5/16 2-3/8 122104 1/8 1-7/16 2-1/2 122105 9/64 1-9/16 2-5/8 122106 5/32 1-11/16 2-3/4 122107 11/64 1-13/16 2-7/8 122108 3/16 1-7/8 3" 122109 13/64 1-15/16 3-1/8 122110 7/32 2" 3-1/4 122111 15/64 2-1/16 3-3/8 122112 1/4 2" 3-1/2 122113 17/64 2-1/8 3-5/8 122114 9/32 2-1/4 3-3/4 122115 19/64 2-3/8 3-7/8 62116 5/16 2-1/2 4" 62117 21/64 2-9/16 4-1/16 62118 11/32 2-5/8 4-1/8 62119 23/64 2-11/16 4-3/16 62120 3/8 2-11/16 4-1/4 62121 25/64 2-3/4 4-5/16 62122 13/32 2-13/16 4-3/8 62123 27/64 2-7/8 4-7/16 62124 7/16 2-15/16 4-1/2 62125 29/64 3" 4-5/8 62126 15/32 3-1/8 4-3/4 62127 31/64 3-1/4 4-7/8 62128 1/2 3-3/8 5" 6

Brute Mechanics Length drills

29 PC. MeCHAnICS LenGTH dRILL SeT 1/16 TO 1/2 BY 64THS, 3/8" REDUCED SHANKS**


*Only 3/16" to 1/2" have flatted sides. **3/8" to 1/2" have 3/8" shanks.

Left Hand drills

Premium high speed steel, 118° standard point,jobbers length (unless marked otherwise). Use with any machinery with a left hand rotation. Commonly used as screw extractors for drilling out broken or frozen bolts and studs.

Part Overall Pkgno. Size Length Qty1146 5/64 2" 121231 3/32 2-1/4 121147 7/64 2-5/8 121232 1/8 2-3/4 121209 9/64 2-7/8" 121233 5/32 3-1/8 121234 3/16 3-1/2 121235 7/32 3-3/4 121242 15/64 3-7/8 121236 1/4 4" 121237 9/32 4-1/4 121148 19/64 4-3/8 61238 5/16 4-1/2 61238SM 5/16 (Sheeters) 2-13/16 61239 3/8 5" 61239SM 3/8 (Sheeters) 3-1/8 61240 7/16 5-1/2 61241 1/2 6" 6

29 PC. HSS LeFT HAnd dRILL SeT 1/16 TO 1/2 BY 64THS, RIGHT HAND, STRAIGHT

SHANKS. PART nO. 5984 (INDEX #6003)

10 PC. STRAIGHT FLUTe SCReW exTRACTOR KIT W/ L.H. dRILLS#1 TO #5 EXTRACTORS WITH COR-RESPONdINg LEFT-HAND DRILLS IN A CLEAR BOX. PART nO. 539MK

5 PIeCe STRAIGHT FLUTe ex-TRACTOR SeT# 1 TO #5 EXTRACTORS IN A VINYL POUCH. PART nO. 50-267

Straight Flute Screw extractors

Removes right or left hand threaded parts. Part For Screw drillno. Size Size Required50-262 1 1/4-5/16 1/850-263 2 3/8 3/1650-264 3 7/16 15/6450-265 4 1/2-9/16 5/1650-266 5 5/8 3/8

drill Bits


Spiral Flute Screw extractors

For For UsePart Screw Pipe drillno. Size Size Size Size50-252 1 3/32-5/32 - 5/6450-253 2 5/32-7/32 - 7/6450-254 3 7/32-9/32 - 5/3250-255 4 9/32-3/8 - 1/450-256 5 3/8-5/8 1/8, 1/4 17/6450-257 6 5/8-7/8 3/8 13/3250-258 7 7/8 - 1-1/8 1/2 17/3250-259 8 1-1/8-1-3/8 3/4 13/1650-260 9 1-3/8-1-3/4 1" 1-1/16Larger sizes available upon special request.

Hex or Round Shank. Heat treated alloy steel for shockproof rotary or percussion drilling. Quickly cuts hard and abrasive masonry materials. Pkg: 1 each

Part Bit Overall Drilling ShankNumber Dia. Length Depth Dia.1149 1/8 3" 1-1/2 1/81150 5/32 3" 1-1/2 5/321151 3/16 3" 1-1/2 3/161152 1/4 4" 2-1/2 1/41153 1/4 6" 4-1/2 1/41154 1/4 13" 12" 1/41155 5/16 4" 2-1/2 9/321156 5/16 6" 4-1/2 9/321157 5/16 13" 12" 9/321158 3/8 4" 2-1/2 11/321159 3/8 6" 4-1/2 11/321160 3/8 13" 12" 11/321161 7/16 6" 4-1/2 3/81162 1/2 6" 4-1/2 3/81163 1/2 13" 12" 3/81164 5/8 6" 4-1/2 1/21165 3/4 6" 4-1/2 1/21166 7/8 6" 4-1/2 1/21167 1" 6" 4-1/2 1/2

Carbide Tipped Masonry Hammer drills

Concrete Screw drills

The standard masonry drill supplied with concrete screws. Split shank configuration fits properly in the installation tool. High quality carbide tip. Black oxide finish. Warning: Concrete screw drills have spe-cial dimensions, and a substitution may result in fastening failure.

Part For Screwno. drill Size diameter23-288 5/32 x 3-1/2 3/16"23-282 5/32 x 4-1/2 3/16"23-284 5/32 x 5-1/2 3/16"23-287 3/16 x 3-1/2 1/4"23-285 3/16 x 4-1/2 1/4"23-286 3/16 x 5-1/2 1/4"

10 PC SPIRAL exTRACTOR SeT W/ L.H. dRILLS #1 TO #5 WITH CORRESPONDING LEFT HAND DRILLS IN A STURDY METAL INDEX. PART nO. 5985

5 PIeCe SPIRAL exTRACTOR SeT#1 TO #5 EXTRACTORS IN A VINYL POUCH. PART nO. 50-261

drill Bits


Part Bit Overall drillingnumber dia. Length depth1168 3/16 4" 2"1169 3/16 6" 4"1170 1/4 4" 2"1171 1/4 8" 6"1172 1/4 12" 10"1173 5/16 4-1/2" 2-1/21174 5/16 6" 4"1175 3/8 6" 4"1176 3/8 9" 7"1177 3/8 12" 10"1178 3/8 20" 18"1179 7/16 6" 4"1180 1/2 6" 4"1181 1/2 9" 7"1182 1/2 12" 10"1183 1/2 20" 18"1184 5/8 5" 3"1185 5/8 9" 7"1186 5/8 12" 10"1187 5/8 18" 16"1188 3/4 5-1/2 3-1/21189 3/4 9" 7"1190 3/4 12" 10"1191 3/4 18" 16"1192 7/8 5" 3"1193 7/8 9" 7"

"A" Taper ShankMasonry Hammer drills

Designed for use in rotary hammer drills with standard A-Taper chucks, or use in combination with correspond-ing adapters. Patented flute design for faster dust removal. Cuts hard and abrasive masonry materials. Meets ANSI standards. Pkg: 1 each

"A" Taper Chuck AdaptersWith drift Pin

Allows "A" Taper shank drills to be used in SDS, Spline, Hex and other types of drives from most power tool manufacturers. Made from heat treated alloy steel.

Part no. description1199 ........................... Drift Pin

Part no. description1194 ....................... SDS AdapterFor Hammer Drill Models; Hilti 17/ 12/ 22, Bosch 11207/ 11211, AEG PH210/ PHE16RL, B & D 5016-09, Hitachi YRT22A, Kango 327, Red Head 555/ 715, Ryobi ED211

Part no. description1195 ......................Spline AdapterFor Hammer Drill Models; AEG PH38/PHD38/PH240/PH240D/PH350/PH350D, B & D 5041/42/43, Bosch 11202/3/4/5/9, Hitachi DH38VA, Metabo RH66/99/99X, Milwaukee 5343/47, Phillips 747-2, Ryobi ED382P

Part no. description1196 ........................Hilti AdapterFor Hammer Drill Models; Hilti TE 52/ 60/ 72/ 92

Part no. description1197 .....................7/16 Hex Shank AdapterFor Hammer Drill Models; Skil 726, Milwaukee 5300/05/10/15Part no. description1198 .....................9/16 Hex Shank AdapterFor Hammer Drill Models; Milwaukee 5325/26, B & D 5048, Skil 728/731/732

Saws, reams and drills woods, plywood, plastics, brass and aluminum. Cross-milled cutting edges for rapid non-clog cutting. Works in both portable drills and drill presses. Use for speed cutting outlet holes in drywall, truck mudflap bolt holes and more.. Made in U.S.A.

Part Overall Pkgno. diameter Length Qty975.................... 1/4 .......................3-¾ ...................1

The drill Saw

Combination drill / TapHigh Speed Steel, 118° Point, GH-3 thread limits.Allows two operations in one set-up or may be used as a standard tap. Designed for thread cutting in deep or through holes.

Part Tap Overall Thread drill drillno. Size Lg. Lg. Lg. dia.6392 5/16-18 2-23/32 27/32 9/16 .2666394 3/8-16 2-15/16 1" 21/32 .322

drill Bits


Genuine Jacobs brand chuck keys are made in U.S.A. Pkg. 1 each

Part Jacobs Chuck Pilotno. Key no. Size Size29-398 K1 1/4 5/32For Jacobs chuck no.s 1A, 1B3/8, 7BA3/829-402 K30 3/8 15/64For Jacobs chuck no.s 31-01, 31-02, 31BA3/8, 31BA1/229-404 K2 3/8 1/4For Jacobs chuck no.s 2A, 2BA3/829-405 K7 3/8 7/32Fits Jacobs chuck model 7BA3/8

NOTE: Chuck Keys not listed available on special request. Include key number, brand, or model number of chuck when ordering. Drill Chucks also available.

drill Chuck Keys

Chuck Key Holder

Forget about lost or misplaced chuck keys. these holders attach to your power cord to securely hold your chuck key to power cord. Part no. 29-408

Carbide Bur Kit

8 Sizes - SA5, SC3, SC5, SD5, SF3, SF5, SG3, SL4 with double-cut flutes in hardwood case. Solid C2 car-bide burs with 1/4" shanks. Part no. 5983

Solid Carbide Burs available on special request...

60° Cone Shape (SJ)

90° Cone Shape (SK) Cylinder-End Cut (SB)

Cone Shape (SM)

Flame Shape (SH)Oval Shape (SE) Inverted Cone Shape (SN)

Ball Shape (SD)

14° Taper-Radius End (SL)

Tree-Radius End (SF)

NF Burs for Aluminum

1/8 Shank Mini Burs (SE51)

Cylinder Shape (SA) Tree-Pointed End (SG)

Cylinder-Radius End (SC)

BruteTM Spiral Point Taps

Specially designed flute angle efficiently pushes chip material ahead and away from the cut-

ting threads, to avoid clogging and breakage of tap. Brute Spiral Point Taps provide cleaner cuts, resulting in more precise thread tolerances. Brute Spiral Point Taps stay sharper longer than standard hand taps and require less effort to use. Universal plug style, 3-flutes. Special high speed steel. Surface treated for added lubricity. Ground threads to H3 limits. Part Thread Overall Pkgno. Size Length Length Qty

COARSe THReAd (UnC)6330 6-32 11/16 2" 126331 8-32 3/4 2-1/8 126332 10-24 7/8 2-3/8 126333 12-24 15/16 2-3/8 126334 1/4-20 1" 2-1/2 126335 5/16-18 1-1/8 2-23/32 126336 3/8-16 1-1/4 2-15/16 126337 7/16-14 1-7/16 3-5/32 126338 1/2-13 1-21/32 3-3/8 12

FIne THReAd (UnF)6374 6-40 11/16 2" 126375 8-36 3/4 2-1/8 126343 10-32 7/8 2-3/8 126344 12-28 15/16 2-3/8 126345 1/4-28 1" 2-1/2 126346 5/16-24 1-1/8 2-23/32 126347 3/8-24 1-1/4 2-15/16 126348 7/16-20 1-7/16 3-5/32 126349 1/2-20 1-21/32 3-3/8 12

Hand Tap SetsConsists of taper, plug, & bottoming style taps. High speed steel, ground threads, standard flute and H-limit.

UnCPart no. Size6117 4-406119 5-406121 6-326123 8-326125 10-246127 12-246129 1/4-206131 5/16-186133 3/8-166135 7/16-146137 1/2-136139 9/16-126141 5/8-116143 3/4-106145 7/8-96147 1-8

UnFPart no. Size6118 4-486120 5-446122 6-406124 8-366126 10-326128 12-286130 1/4-286132 5/16-246134 3/8-246136 7/16-206138 1/2-206140 9/16-186142 5/8-186144 3/4-166146 7/8-146148 1-14

Tapsdrill Bits


COARSe THReAd HAnd TAPS (nC)TAP TAPeR PLUG BOTTOMInG nO. OF THReAd PKG SIZe (STARTeR) (UnIVeRSAL) (FInISHInG) FLUTeS LIMITS QTy Part number Part number Part number1-64 - 6151 - 2 H2 122-56 6155 6154 6156 3 H3 123-48 6161 6160 6162 3 H3 124-40 6167 6166 6168 3 H3 125-40 6173 6172 6174 3 H3 126-32 6179 6178 6180 3 H3 128-32 6185 6184 6186 4 H3 1210-24 6191 6190 6192 4 H3 1212-24 6197 6196 6198 4 H3 121/4-20 6206 6205 6207 4 H3 125/16-18 6209 6208 6210 4 H3 123/8-16 6212 6211 6213 4 H3 67/16-14 6215 6214 6216 4 H3 61/2-13 6218 6217 6219 4 H3 69/16-12 6221 6220 6222 4 H3 15/8-11 6224 6223 6225 4 H3 13/4-10 6227 6226 6228 4 H3 17/8-9 6230 6229 6231 4 H4 11-8 6233 6232 6234 4 H4 11-1/8-7 50-532 50-530 50-531 4 H4 11-1/4-7 6236 6235 6237 4 H4 11-3/8-6 50-538 50-536 50-537 4 H4 11-1/2-6 6239 6238 6240 4 H4 1

FIne THReAd HAnd TAPS (nF)TAP TAPeR PLUG BOTTOMInG nO. OF THReAd PKG SIZe (STARTeR) (UnIVeRSAL) (FInISHInG) FLUTeS LIMITS QTy Part number Part number Part number0-80 - 6149 6150 2 H2 121-72 - 6152 6153 2 H2 122-64 6158 6157 6159 3 H2 123-56 6164 6163 6165 3 H2 124-48 6170 6169 6171 3 H2 125-44 6176 6175 6177 3 H2 126-40 6182 6181 6183 3 H3 128-36 6188 6187 6189 4 H3 1210-32 6194 6193 6195 4 H3 1212-28 6200 6199 6201 4 H3 121/4-28 6242 6241 6243 4 H3 125/16-24 6245 6244 6246 4 H3 123/8-24 6248 6247 6249 4 H3 67/16-20 6251 6250 6252 4 H3 61/2-20 6254 6253 6255 4 H3 69/16-18 6257 6256 6258 4 H3 15/8-18 6260 6259 6261 4 H3 13/4-16 6263 6262 6264 4 H3 17/8-14 6266 6265 6267 4 H4 11-14 6269 6268 6270 4 H4 11-1/8-12 50-574 50-572 50-573 4 H4 11-1/4-12 6272 6271 6273 6 H4 11-3/8-12 50-580 50-578 50-579 6 H4 11-1/2-12 6275 6274 6276 6 H4 1

3-5 THREADSCHAMFER LENGTH

TAPeR TAPS

8-10 THREADSCHAMFER LENGTH

PLUG TAPS BOTTOMInG TAPSTapered for easy starting of new threads. Also called Starter Taps.

Can be used for threading new holes, or cleaning up dam-aged threads. Also called Universal Taps.

Use to put threads to the bottom of blind holes after using Taper or Plug Taps.

High Speed Taps

1/2-1-1/2 THREADSCHAMFER LENGTH


Metric Plug TapsUniversal plug taps create new threads or clean up damaged threads. High speed steel, ground threads, standard flutes and D-limits. Taper and bottoming available on request.

3-5 THREADS

Part Tap Thread no. Of Thread drill Pkgnumber Size Pitch Flutes d-Limit Size Qty50-800 M3 0.50 C 3 3 #40 1250-801 M4 0.70 C 4 4 #30 1250-802 M5 0.80 C 4 4 #19 1250-803 M6 1.00 C 4 5 #9 1250-804 M8 1.25 C 4 5 H 650-811 M8 1.00 F 4 5 J 650-805 M10 1.50 C 4 6 R 650-812 M10 1.25 F 4 5 S 650-806 M12 1.75 C 4 6 13/32" 650-807 M14 2.00 C 4 7 15/32" 150-808 M16 2.00 C 4 7 35/64" 150-809 M18 2.50 C 4 7 5/8" 150-810 M20 2.50 C 4 7 11/16" 1

National pipe threads. Use high speed steel for tough jobs requiring a quality finish. Use carbon steel taps for occasional use on mild steels. Pkg: 1 eachnPT no. Overall High CarbonSize Flutes Length Speed Steel1/8-27 4 2-1/8 6277 63761/4-18 4 2-1/8 6278 63773/8-18 4 2-9/16 6279 63781/2-14 4 3-1/8 6280 63793/4-14 5 3-1/4 6281 63801-11-1/2 5 3-3/4 6282 63811-1/4-11-1/2 5 4-1/2 6283 63821-1/2-11-1/2 7 4-1/2 6284 63832-11-1/2 7 4-1/2 50-632 6384

Taper Pipe Taps

T-Handle Tap Wrenches

Hardened steel jaws. Simply adjusts by turning knurled handle. Can also be used with reamers.

Part no. Capacity10-496 #0 - 1/2"10-494 1/4 - 1"

Tap Wrenches

Sliding handle with spring tension stop. May be extended for more leverage.

Part no. Capacity6203 #0 - 1/4"6204 1/4 - 1/2"

Brute Tap-drill Sets Unique dispenser quickly organizes taps with the correct twist drill size.

Special heavy duty drills feature advanced metallurgy and sophisticated geometry which increase strength and durability. The 135° split point drills faster and requires less force to penetrate. BruteTM spiral point taps cut faster and require less torque than standard hand taps. Ideal for tapping steel and most any materials. Taps feature forward chip ejection for clean, accurate tapping. Note: Spiral point taps are designed for through hole or deep hole threading only. Not for blind holes.

18 PC. COARSe (UnC) THReAd TAP/dRILL SeT

TAP SIzES - 6/32, 8/32, 10/24, 10/32,1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13 DRILL SIzES - 36, 29, 25, 21, 7, F, 5/16,

U, 27/64 PART nO. 5972 (INDEX #5966)

18 PC. FIne (UnF) THReAd TAP/dRILL SeT

TAP SIzES - 6/40, 8/36, 10/32, 12/28,1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20DRILL SIzES - 33, 29, 21, 15, 3, I, Q,

25/64, 29/64 PART nO. 5973 (INDEX #5969)

FRACTIOnAL SUPeR SeTMade from the finest quality tool steel. Carbon steel plug taps, car-bon steel hex dies, adjustable tap wrench, t-tap wrench, adjustable die stock, screwdriver, thread gauge, unbreakable plastic case. Tap & die Sizes Coarse: 4-40, 6-32, 8-32, 10-24, 12-24, 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13

Fine: 10-32,1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20Pipe: 1/8-27 NPT

Part no. no. of Pcs. Pkg5958 39 1 set

MeTRIC SUPeR SeTMade from the finest quality tool steel. Carbon steel plug taps, carbon steel hex dies, adjustable tap wrench, t-tap wrench, adjustable die stock, screwdriver, thread gauge, unbreakable plastic case.

Tap & Die Sizes Coarse:3x.50, 4x.7, 5x.80, 6x1.0, 7x1.0, 8x1.25, 10x1.5, 11x1.5, 12x1.75Fine: 4x.75, 5x.90, 8x1.0, 9x1.0, 10x1.25, 12x1.5BSP: 1/8x28Part no. no. of Pcs. Pkg.5959 41 1 set

Tap & die Sets

Taps


Part number Part numbernC nF Size6291 - #46292 - #56293 - #66294 - #86295 6296 #106297 - #126300 6301 1/46302 6303 5/166304 6305 3/86306 6307 7/166308 6309 1/26312 6313 9/166314 6315 5/86316 6317 3/46318 6319 7/86320 6322 1"6323 6324 1-1/86325 6326 1-1/46327 6328 1-3/86329 6299 1-1/2

Round Adjustable Threading diesCuts new threads. Repair damaged, rusty or painted threads. Must be used with special die holders (see next page). Offered in unified coarse (NF) and fine (NF) threads. Made from high speed steel. Pkg: 1 each.

Part number OutsidenC nF Size diameter

1" O.d.50-702 - #6 1"50-703 - #8 1"50-704 50-719 #10 1"50-705 - #12 1"50-706 50-720 1/4 1"50-707 50-721 5/16 1"50-708 50-722 3/8 1"50-709 50-723 7/16 1"

1-1/2" O.d.50-710 50-724 1/4 1-1/2"50-711 50-725 5/16 1-1/2"50-712 50-726 3/8 1-1/2"50-713 50-727 7/16 1-1/2"50-714 50-728 1/2 1-1/2"50-715 50-729 9/16 1-1/2"

2" O.d.50-716 50-730 5/8 2"50-717 50-731 3/4 2"50-718 50-732 7/8 2"

Metric and pipe thread dies available on special request. nPT PIPe SIZeS

Part no. Size6286 1/8-27 NPT6287 1/4-18 NPT

Great for repairing damaged, rusty or painted threads. No special die holder necessary. Almost any wrench can be used. Offered in unified coars (NF), fine (NF) and pipe thread (NPT). Made from carbon steel.Pkg: 1 each.

Hexagon Rethreading dies

die Stocks

For adjustable round dies only. Maintains positive alignment for accurate threading. Die locks in place with set screw. For adjustable round dies only.

Part no. die O.d.10-495 1"10-492 1-1/2"10-493 2"

Thread Restoring Files

Restore battered, rusted and corroded threads quickly. Thread sizes marked on file. Size: 7/16 square x 8½". Made in U.S.A.

Part no. Threads Per Inch21-427 11, 12, 13, 14, 16, 18, 20, 2421-428 9, 10, 12, 16, 20, 27, 28, 32

Threading diesdrill Bits


drill Index Cases and dispensers

Part no. description 5968 13 pc. Fractional, 1/16-1/4 by 64ths

5970 15 pc. Fractional, 1/16-1/2 by 32nds

5971 21 pc. Fractional, 1/16-3/8 by 64ths

6003 29 pc. Fractional, 1/16-1/2 by 64ths

6004 60 pc. Wire Gauge, 1-606005 26 pc. Letter Gauge, A-z5967 8 pc. Fractional S&D, 9/16-1" by 16ths

5966 18 pc. NC Tap-Drill Index, #6-1/2" Taps5969 18 pc. NF Tap-Drill Index, #6-1/2" Taps

drill dispenser Cabinet

Holds 29 sizes, 1/16" to 1/2" by 64ths. Durable steel, gray enamel finish. Made in U.S.A. Part no. 6000

Also available in metric, wire, letter gauge, and for taps.

Withstands tension in excess of 60,000psi! Made in u.S.A. Accepts 12" long blades. 20/24 TPI variable tooth bimetal blade (1) included. Part no. 1629

High-Tension Heavy duty Frame

Light Weight High-Tension Frame

Lightweight, rigid frame design. Handle and end pieces are tough, die-cast aluminum. Blade can be set at 55° angle for flush cutting. Includes 12"-24TPI bimetal saw blade. Storage compartment for spare blades. Can be used as a "jab" saw. Part no. 1640

Standard duty, has an adjustable frame for both 10" and 12" blade lengths. Enclosed handle. Depth of cut is 3-3/4". Includes 24TPI blade. Part no. 1635

Adjustable Frame

drill Accessories

128 PC. BRUTe dRILL ASSORTMenT 1/16 TO 1/2 BY 32THS, STRAIGHT SHANK

IN 3-DRAWER DRILL DISPENSER PART nO. 5900


Hack Saw Blades

Bimetal power blades, consisting of a high-speed cut-ting edge welded to an alloy back. Built for long lasting service under average shop cutting conditions.

Part PkgSize TPI no. Qty1" x 12" 14 1633 101" x 14" 14 1634 10

Bimetal Hack Saw Blades

SAFE To USE • FLEXiBLE • WiLL noT SHATTERBimetal blades offer a super-sharp high-speed steel cutting edge, electron beam welded to a flexible alloy back. Allows straight cuts and long life in high tension frames and greatest possible user safety. To select proper tooth spacing, 3 teeth minimum (6 to 12 teeth optimum) must be in contact with the work at all times. Tooth hardness: Rc 65-67 for increased heat and wear resistance and long life. neW VARIABLe PITCH option allows fast and efficient cutting in a wider range of materials than standard tooth blades. That lets you stock fewer blades and saves you time and money!

Part PkgSize TPI no. QtySTAndARd TOOTH1/2 x 12" 18 1630 10 ea‘Case of 100’ 1630C 1 cs1/2 x 12" 24 1631 10 ea‘Case of 100’ 1631C 1 cs1/2 x 12" 32 1632 10 ea‘Case of 100’ 1632C 1 csVARIABLe TOOTH1/2 x 12" 14/18 1627 10‘Case of 100’ 1627C 1 cs1/2 x 12" 20/24 1628 10‘Case of 100’ 1628C 1 cs

Power Hack Saw Blades

MeTAL CUTTInG 1/8" THICK & ABOVe½" Shank Bimetal Blades for heavy gauge metals 1/8" thick and above. Barstock & Angles.

Part Teeth Pkgno. Length Width Per Inch Qty21-310 4" 3/4" 14T 521-311 6" 3/4" 14T 5

MeTAL CUTTInG 18 GAUGe TO 1/8" THICK½" Shank Bimetal Blades for heavy gauge metals of 18 gauge to 1/8" thick. Conduit, pipe, channels and tubing.


MeTAL CUTTInG 18 GAUGe* & UndeR½" Shank Bimetal Blades for light gauge tubing and sheet metal 18 gauge thick and under.


Bimetal Reciprocating Saw BladesDesigned to fit all popular reciprocating machines that take ½" shank blades. High speed steel cutting edge welded to a flexible alloy steel back. Faster cutting with sharper, harder teeth and extra strength shank. Bimetal steel reduces breakage and last longer than conventional carbon and high speed blades. Made U.S.A.

nAIL eMBedded WOOd CUTTInG / PLASTeR½" Shank Bimetal Blades for fast wood cutting & general roughing-in work. Blade thickness: .050"


"VARIABLe TOOTH"WOOd CUTTInG / LIGHT MeTAL CUTTInG½" Shank Bimetal Blades for all wood, composition materials, plastics, nail embedded wood, cast aluminum, light gauge metals. Blade thickness: .035"

Part Teeth Pkgno. Length Width Per Inch Qty21-318 8" 3/4" 10/14T 5


HIGH SPeed STeeLFeRROUS MeTAL CUTTInG 1/16" TO 3/16" THICK, nOnFeRROUS MeTALS TO 1/8" THICKBlade thickness: .032"

Part Teethno. Length Width Per Inch21-322 2-3/4" 5/16" 24T

CARBOn STeeLWOOd CUTTInG 1/4" TO 1" THICKScroll cutting wood, plywood, plastics. Smooth cuts. Blade thickness: .050"


BIMeTALMeTAL CUTTInG 1/8" THICK & ABOVeBimetal Blades for light gauge metals, fiberglass, hard rubber, nail-embedded woods. Blade thickness: .035"

Part Teeth no. Length Width Per Inch21-319 3-5/8" 3/8" 14T

MeTAL CUTTInG 18 GAUGe* & UndeRBimetal Blades for light gauge metals 18 gauge thick and under. Trim, tubing, etc. Blade thickness: .035"


FeRROUS & nOn-FeRROUS MeTAL CUTTInG UP TO 1/8" THICKBimetal Blades for metals up to 1/8" thick. Blade thickness: .035"

Part Teeth no. Length Width Per Inch21-321 2-3/4" 3/8" 24T

Sabre/Jig Saw Blades¼" universal shank. Extra tough, sharp teeth.

Pkg: 5 each (no broken packages) Carbon Steel Band Saw BladesLow Carbon Heat Treated Steel. Accepts heavy feed pressure and blade tension. Used in production for softer, easy feed materials such as plastics, wood, and machineable metals. Thickness: .025". Raker set*.

Part Teeth Pkgno. Length Width Per In. Qty6700 44-7/8" 1/2" 14T 3 6701 64-1/2" 1/2" 14T 2

Bimetal Band Saw BladesFast cutting, high-speed steel edge welded to a flexible alloy back. Used for cutting hard metals. Resists heat and shock and can be operated at speeds up to ten times faster than regular carbon blades. The quality of Bimetal Band Saw Blades reduces blade costs per cut by increasing cutting rate and blade life.

Thickness: .035" • Raker set* • Pkg: 2 each

Part Teeth Pkgno. Length Width Per In. Qty6702 44-7/8" 1/2" 14T 36703 64-1/2" 1/2" 14T 2

Custom-Made Band Saw BladesCut-to-Length and welded to your specifications. When ordering custom blades please specify the following information:

1. .TyPe OF MATeRIALCarbon-Hardback, M42 Bimetal, Wood Cutting

2. .BLAde WIdTHCarbon hardback ......................................... 1/8" to 2"M42 Bimetal........................................... 1/4" to 1-1/2"Wood Cutting ...............................1/4, 3/8, 1/2, 3/4, 1"

3. .BLAde LenGTHJust use one of the three following methods to determine the blade length. 1.) Cut an old blade and measure the length from end to end. 2.) Apply masking tape around a blade and overlap the ends. With a knife, cut tape across the overlapped area, then remove tape and measure length. 3.) Specify saw make and model number when ordering.

4. .TeeTH PeR InCHCarbon hardback (raker set)...6, 8, 10, 14, 18, 24, 32M42 Bimetal (raker set) ..........................6, 10, 14, 18Wood cutting (hook tooth) ....................................3, 4

note: Custom-made blades are not returnable unless an error was made on our part.

Hack Saw Blades


Bimetal Hole Saws with "Built-in" Arbors

No more lost arbors! Permanently at-tached arbors in all sizes saves in tool costs and setup time. Variable pitch (4/6T positive rake) lasts up to 3 times longer than 6 pitch saws. Variable pitch design cuts up to 45% faster than standard 6 pitch saws. High-speed bimetal M3 tooth design cuts pipe, steel, cast iron, plastic and wood. Hex arbor size: 7/16". Cut-ting depth: 1-3/8".

Part diameter diameter no. (Inch) (MM)6600 9/16 146601 5/8 166602 11/16 176603 3/4 196604 13/16 216605 7/8 226606 15/16 246607 1" 256608 1-1/16 276609 1-1/8 296610 1-3/16 306611 1-1/4 326612 1-5/16 336613 1-3/8 356614 1-7/16 376615 1-1/2 386616 1-9/16 406617 1-5/8 416618 1-11/16 436619 1-3/4 446620 1-13/16 466621 1-7/8 486622 2" 516623 2-1/16 526624 2-1/8 546625 2-1/4 576626 2-3/8 606627 2-1/2 646628 2-5/8 676629 2-3/4 706630 2-7/8 736631 3" 766632 3-1/8 796633 3-1/4 836634 3-1/2 896635 3-5/8 926636 3-3/4 956637 3-7/8 986638 4" 1026639 4-1/8 1056640 4-1/4 1086641 4-3/8 1116642 4-1/2 1146643 4-3/4 1216644 5" 1276645 5-1/2 1406646 6" 152

- Pilot Drill not included (see next page).

Traditional Bimetal Hole Saws(Separate Arbors)

High-speed bimetal M3 tooth design. Variable pitch (4/6T positive rake) lasts up to 3 times longer than or-dinary 6 pitch saws. Variable pitch design can reduce labor costs and tool costs in a wide range of applica-tions. Cuts up to 45% faster than 6 pitch saws. Cuts pipe, steel, cast iron, plastic and wood. Arbor and Pilot Drill not included. Cutting depth: 1-3/8".

Part diameter diameter no. (Inch) (MM)6650 9/16 146651 5/8 166652 11/16 176653 3/4 196654 13/16 216655 7/8 226656 15/16 246657 1" 256658 1-1/16 276659 1-1/8 296660 1-3/16 306661 1-1/4 326662 1-5/16 336663 1-3/8 356664 1-7/16 376665 1-1/2 386666 1-9/16 406667 1-5/8 416668 1-11/16 436669 1-3/4 446670 1-13/16 466671 1-7/8 486672 2" 516673 2-1/16 526674 2-1/8 546675 2-1/4 576676 2-3/8 606677 2-1/2 646678 2-5/8 676679 2-3/4 706680 2-7/8 736681 3" 766682 3-1/8 796683 3-1/4 836684 3-1/2 896685 3-5/8 926686 3-3/4 956687 3-7/8 986688 4" 1026689 4-1/8 1056690 4-1/4 1086691 4-3/8 1116692 4-1/2 1146693 4-3/4 1216694 5" 1276695 5-1/2 1406696 6" 152

9/16 to 1-3/16 diameter have 1/2-20 threaded arbor hole.1-1/4 to 6" diameter have 5/8-18 threaded arbor hole.


No more lost arbors! Permanently attached arbors saves in tool costs and set-up time. Variable pitch (4/6 tooth positive rake). Lasts up to 3 times longer than 6 pitch saws! Sizes: 3/4, 7/8, 1-1/8, 1-3/8, 1-1/2, 1-3/4, 2-1/4, 2-1/2 holes saws. 4 pilot drills. 1 screwdriver. 1 - 12" extension. Sturdy plastic carry-ing case. Part no. 6647

Traditional Bimetal Hole Saw Set

Arbor Arbor drillw/drill For drill Thread ChuckPart no. Saws Part no. Size Size

1/4" ROUND SHANK6704 9/16 to 1-3/16 6709 1/2-20 1/4-1/2

1/4" HEX SHANK6705 9/16 to 1-3/16 6710 1/2-20 1/4-1/2 7/16" HEX SHANK6706 9/16 to 1-3/16 6709 1/2-20 1/2 7/16" HEX SHANK6707 1-1/4 to 6" 6710 5/8-18 1/2

Hole Saw Arbors

Hole Saw Pilot drillsFits both traditional and built-in style arbors.

Bimetal Hole Saw Set with Built-in Arbors

Hole Saw Sets

Variable pitch (4/6t positive rake). Lasts up to 3 times longer than 6 pitch saws. Sizes: 3/4, 7/8, 1-1/8, 1-3/8, 1-1/2, 1-3/4, 2-1/4, 2-1/2 holes saws. 3 arbors, 3 drills, 1 - 12" extension. Sturdy plastic carrying case. Part no. 6648

Hole Saw Accessories

12" Hole Saw extensionFits 7/16" hex shank hole saw arbors.

PkgPart no. Size Qty6709 1/4 x 4-1/2, 3 flat sides 16710 1/4 x 3", 1 flat side 1

drillPart no. Length Chuck Size6708 12" 1/2


Section 13 Abrasives

AAbrasives

Aluminum Grinding 13-2Chop Saw 13-3Crocus Cloth 13-5Cupstones 13-2Cut-Off Wheels 13-2, 13-3Depressed Center Wheels 13-1Emery Cloth 13-5Fiber Discs 13-7Flap Discs 13-7Flaring Cupstones 13-2FlexFinish Discs 13-6Flex Grinding Wheels 13-1Grinding Discs 13-1Hand Pads 13-8Masonry

Cut-Off Wheels 13-3Grinding Wheels 13-1

Metal Grinding 13-1Mounted Points 13-3Quick-Lok Discs 13-6Resin Fiber Discs 13-7Sanding Screen 13-5Screen-Bak 13-5Shop Rolls 13-5Surface Conditioning Discs 13-6Trim-Kut® Discs 13-5Utility Rolls 13-5Zirconia Grinding Wheels 13-1

AdaptersBench Grinding Wheel 13-4Cut-Off Wheel 13-2, 13-3Trim Kut Disc 13-5

Aluminum Grinding Wheels 13-2Arbors

Cut Off Wheel 13-3

CChop Saw Wheels 13-3Cloth Utility Rolls 13-5Crocus Cloth 13-5Cupstones 13-2Cut-Off Wheels

Adapters 13-3Chop Saws 13-3Circular Saws 13-2Concrete 13-3Die Grinders 13-2Portable Saws 13-3

DDie Grinder Wheels 13-2Dresser, Grinding Wheel 13-4

EEmery Cloth 13-5

FFlap Discs 13-7Flap Wheels 13-7Flaring Cupstones 13-2FlexFinish® Discs 13-6Flex Grinding Wheels 13-1Flex Wheel 13-1

GGrinding

DiscsDepressed Center 13-1Fiber 13-7Flap 13-7Flex Wheel 13-1Masonry 13-1Metal Cutting 13-1Pipeline Notching 13-1Quick-Lok 13-6Resin Fiber 13-7Trim-Kut 13-5

Wheel Dressers 13-4

WheelsAdapters 13-4Bench 13-4Bushings 13-4Chop Saw 13-3Cut-Off 13-2Flaring Cupstones 13-2Silicon Carbide 13-4

MMasonry

Grinding Discs 13-1Mounted Flap Wheels 13-7Mounted Grinding Points 13-3

QQuick-Lok Grinding Discs 13-6

RResin Fiber Discs 13-7

SSanding Screen 13-5Scotch-Brite Pads 13-8Screen-Bak 13-5Shop Rolls 13-5Surface Cond. Discs 13-6

TTrim-Kut® Grinding Discs 13-5

UUtility Rolls 13-5

WWheel

Dressers 13-4

ZZirconia Grinding Wheels 13-1


Flat - Type 27 (without hub)Part Thick Max. Pkgnumber dia. -ness Arbor RPM* Spec. Qty6-444 3" 1/8 3/8 19,000 A30 256-446 4" 1/8 5/8 15,000 A30 256-447 4½ 1/8 7/8 15,000 A30 256-470 7" 1/8 7/8 8,500 A24 256-342 3" 1/4 3/8 20,000 A30 256-343 4" 1/4 3/8 15,000 A30 256-381 4" 1/4 5/8 15,000 A30 256-035 4½ 1/4 7/8 13,300 A30 256-038A 7" 1/4 7/8 8,500 A24 25Flat - Type 27 (with 5/8-11 Hub)

*Complies with American National Standards Institute (ANSI) codes.

6-476 4½ 1/4 5/8-11 13,300 A30 106-344 7" 1/8 5/8-11 8,500 A24 106-038 7" 1/4 5/8-11 8,500 A24 106-039 9" 1/4 5/8-11 6,500 A24 10

Fast-cutting aluminum oxide grain for use on mild & harder ferrous metals with high metal removal rate. Use 1/8" thick for cut-off, pipe notching and occasional grinding. Use 1/4" thick for heavy duty welds and surface grinding.

Flat - Type 27 Part Thick Max. Pkgnumber dia. -ness Arbor RPM* Spec. Qty6-355 7" 1/4 5/8-11• 8,500 z24T 256-356 9" 1/4 5/8-11• 6,500 z24T 20

• with Hub

Use on titanium, mild steels, and most hardened metals. Excellent for grinding hard-surface welds on buckets and plows. zirconium costs much less than natural diamonds and is one of the hardest man-made materials known. Out-lasts aluminum oxide wheels 5 to 1. Cuts costs, reduce expensive down-time changing wheels. zirconia wheels stay sharp as new surfaces constantly replace worn edges, for faster and cleaner grinding.

Saucer - Type 28 (with 5/8-11 Hub)6-036 7" 1/4 5/8-11 8500 A20 106-037 9" 1/4 5/8-11 6500 A20 10

Zirconia Metal Grinding

Aluminum Oxide Metal Grinding

Flat - Type 27 with HubPart Thick Max. Pkgnumber dia. -ness Arbor RPM* Spec. Qty6-040 7" 1/4 5/8-11 8,500 C16 10

Silicone Carbide Masonry GrindingUse on medium to soft non-metallic materials.

depressed Center Grinding Wheels

The Flex WheelCombines the advantages of depressed center grinding wheels and resin fibre discs.Last Longer - The flex wheel puts more grinding surface on the job, grinds faster, outwears five or six fibre discs, wears more evenly.does Better Work - Flexibility means a better fit between wheel and job, results in a smoother finish and faster work.Reduces Vibration - Flexibility means less vibration, reduces operator fatigue, improves accuracy.Stronger - The flex wheel is double reinforced with a top layer of non-woven fabric and an internal layer of reinforcing cloth.Reduces dust - Superior bonding in the flex wheel reduces wear and dust.

Part Thick Max. Pkgnumber diam. -ness Arbor RPM* Qty6-456 4½ 1/8 7/8 13,700 256-457• 4½ Plastic Back-up Pad for 6-452 16-345 7" 1/8 7/8 8500 106-380• 7" Plastic Back-up Pad for 6-345 16-350 7" 1/8 5/8-11 8500 25

WARNING: Do not use flex wheels on high speed air sanders.


Cut-Off Wheels for Circular Saws: 6-8"Fast cutting with minimum burr. Works equally efficient on steel, iron, tubing, conduit, structural shapes, sheets.

Reinforced Type 1Includes diamond arbor adapter with 5/8" hole

Part Thick Max. Pkgno. diam. -ness RPM* QtyGeneRAL PURPOSe MeTAL CUTTInG6-357 6" 1/8 10,186 106-358 7" 1/8 8,732 106-360 8" 1/8 7,640 10STAInLeSS STeeL CUTTInG6-009 7" 3/32 8,732 10MASOnRy CUTTInG6-359 7" 1/8 8,732 106-361 8" 1/8 7,640 10ALUMInUM CUTTInG6-458 7" 1/8 6,800 25

depressed Center Grinding Wheels

Part Large Thick Max. no. end dia. -ness Arbor RPM* Spec. Qty6-216 6" 2" 5/8-11 6,040 A16 5


Flat - Type 27Part Thick Max. Pkgno. dia. -ness Arbor RPM* Spec. Qty6-451 4½" 1/4" 7/8" 13,300 A36 106-452 7" 1/4" 5/8-11• 8,500 A36 10

•With Hub

Silicone Carbide Aluminum GrindingFor grinding aluminum, aluminum alloys, & cupro nickel weldments. Extremely cool cutting and will not load due to special wax treatment that dissipates heats.

Flaring Cupstones - for SteelAluminum oxide grain. Grinds welds fast. Use on mild or harder ferrous metals. Resin bonded with a full steel back.

Cut-Off Wheels For die Grinders: 3-4"Use on die grinders, small pencil grinders and some end grinders with straight or flexible shafts. For a variety of metal cutting, grinding, blending and smoothing operations on ferrous metals, cast iron, steel, stainless steel, alloys, tool steel, and exotics.

Reinforced Type 1 - Metal CuttingPart Thick Max. no. diam. -ness Arbor RPM* Spec.GeneRAL PURPOSe MeTAL CUTTInG Pkg: 50 each6-459 3" 1/32 1/4 25,450 A606-007 3" 1/16 1/4 25,450 A366-008 3" 1/32 3/8 25,450 A606-480 3" 1/16 3/8 20,370 A366-375 3" 1/8 3/8 25,450 A366-460 4" 1/32 3/8 19,000 A606-377 4" 1/16 3/8 19,000 A366-378 4" 1/8 3/8 19,000 A366-382 4 1/2 1/16 7/8

dIAMOnd ARBOR AdAPTeRS 973 Diamond to 1/2" hole 10 974 Diamond to 5/8" hole 10

STAInLeSS STeeL CUTTInG Pkg: 50 each6-481 3" 1/16 3/8 20,370 Nz30 ALUMInUM CUTTInG Pkg: 25 each6-482 3" 1/8 3/8 20,370 CA30


Low Profile drive ArborsInner locking nut. Low profile shank adapter for use with Cut-Off Wheels and Wire Brushes.

Part Arbor Stem Max.number diam. diam. RPM*6-109 3/8" 1/4" 20,0006-110 1/2" 1/4" 20,000


Quick Change drive ArborsQuickly adapts small diameter Cut-Off Wheels and Wire Brushes without removing arbor from tool.

Part Arbor Stem Max.number diam. diam. RPM*6-104 1/4" 1/4" 20,0006-105 3/8" 1/4" 20,0006-106 1/2" 1/4" 20,000

Type 1 - Cured Concrete/AsphaltFor long life with good cut on "cured concrete" (concrete cured over 48 hours) or asphalt. ARBOR: 1" WPH Part Thick Max. Pkgnumber dia. -ness Arbor RPM* Spec. Qty6-461 14" 3/16 1" 4366 C16 5

Type 1 - Green ConcreteFor long life with good cut on "green concrete" (concrete cured less than 48 hours) ARBOR: 1" WPH6-373 14" 3/16 1" 4366 C16 5

Part Thick Max. Pkgnumber dia. -ness Arbor RPM* Spec. Qty6-363 12" 1/8 1" 5092 A36 106-364A• 14" 3/32 1" 4366 A46T 106-364 14" 5/32 1" 4366 A24 10

•Use 3/32" thick on smaller, low horsepower chop saws.

Stationary and Chop Saws 12-14"Use where material to be cut is securely held by vise or clamp fixture and the wheel is drawn through the material. Caution: These wheels must never be used on a portable saw.

Type 1 - Metal Cutting

Walk-Behind Street Saws 12-14"18 Horse Power and Under

Portable Gas & electric Saws 12-14"These saws have spindle RPM's in excess of stationary saws. Used in steel building erection, construction

and salvage.

Reinforced - Type 1Part Thick Max. Pkgnumber dia. -ness Arbor RPM* Spec. QtyFOR MeTAL6-365 12" 1/8 1" 6,000 A20 106-367 14" 1/8 1" 5,400 A20 10FOR COnCReTe6-368 14" 1/8 1" 5,400 C20 10

Cut-Off Wheel AdaptersPlastic bushings for use on large cut-off wheels.

Large Abrasive Cut-Off Wheels

Part number Size Pkg993 1" to 5/8" 10 994 1" to 7/8" 10 995 1" to 20 mm 10


Silicon Carbide For Carbide Materials, Glass, Fiberglass

Gen. Purpose 80 GritPart Thick Max.number diam. -ness Arbor RPM*6-032 6" 1" 1" 4138 6-033 7" 1" 1" 3600

1/2, 5/8, & 3/4 bushings supplied with each wheel

A B C D E

Aluminum OxideFor general purpose ferrous metal cutting.

CoarsePart Thick Max.number diam. -ness Arbor RPM*6-020 6" 1" 1" 1 41006-023 7" 1" 1" 1 36006-026 8" 1" 1" 2 36006-211 12" 2" 1-1/2" 4 2069Medium6-022 7" 1" 1" 1 36006-025 8" 1" 1" 2 36006-204 10" 1½" 1¼" 3 24006-210 12" 2" 1-1/2" 4 20696-213 14" 2" 1-1/2" 4 1773

1 ...1/2", 5/8", & 3/4" bushings supplied2 ...5/8" & 3/4" bushings supplied3 ...3/4" & 1" bushings supplied4 ...1" & 1¼" bushings supplied

Plastic Grinding Wheel BushingsTelescopic adapter fits 1" wide bench grinding wheels.

Part no. Size Pkg971 1" to 3/4", 5/8", 1/2" 5

Mounted PointsDesigned for use in high speed die grinders. These precision made mounted points are used for a variety of grinding jobs ranging from the fine tool and die work to weld grinding and blending. (Illustrations are not actual size)

Bench Grinding WheelsEach and every wheel is trued, balanced and speed tested to insure fast cutting, long lasting performance on a variety of metals.

1/8" ShankPart Trade Thick Max.no. Fig. no. dia. -ness RPM*6-301 J B52 3/8 3/4 45,3706-303 G B131 1/2 1/2 34,5006-304 G B132 3/8 1/2 45,3706-306 I W164 1/4 3/4 45,900

F G H I J K

1/4" ShankPart Trade Thick Max.no. Fig. no. dia. -ness RPM*6-309 A A1 3/4 2-1/2 19,8006-311 C A4 1-1/4 1-1/4 30,5606-313 D A11 13/16 1-1/4 19,8606-314 K A12 11/16 1-1/4 48,0006-315 E A21 1" 1" 34,5006-317 G A38 1" 1" 34,5006-319 I W215 1" 1/8 38,200

Grinding Wheel dressersDress all kinds of grinding wheels quickly, exposing sharp new grains. Gives wheels a fresh, unloaded surface. Features hardened, high carbon steel multipiece cutters. Hooded handle helps protect you from flying abrasive. Part For Wheel Trade Repl. Size Size no. Cutters7077 UP TO 10" #0 7078•7079 10" - 16" #1 7080•

• Replacement Cutters are packaged 10 each


emery Cloth SheetsUsed for light metal sanding to remove rust and scale. May be used dry or with oil.9" x 11" SHeeTSPart no. Grit Pkg. Qty.6-073 180 fine 50 sheets

Crocus Cloth Fine 1500 grit cloth polishes metals and copper pipe. 9" x 11" sheets. Pkg: 50 sheets. Part no. 6-077

Part no. Grit Pkg6-087SC 180 fine 1 Roll6-088SC 120 medium 1 Roll6-089SC 80 coarse 1 Roll

Silicon Carbide Screen-BakScreen-Bak woven fabric is silicone carbide coated on both sides. The special open mesh resists clogging even under the hardest use. Flexible and can easily be folded for use as a pad. Tears easily with clean straight edges. Won't disintegrate when wet. Can be used wet or dry. Uses: sanding painted surfaces, metal, wood, and plaster. Roll size 1½” x 25 yards

Part no. Grit Pkg6-078 400 1 Roll6-079 320 1 Roll6-080 240 1 Roll6-081 180 1 Roll6-082 150 1 Roll6-083 120 1 Roll6-084 100 1 Roll6-085 80 1 Roll6-086 60 1 Roll

Cloth Shop RollsAluminum oxide abrasive over flexible cloth backing. Ideal for light finishing of small parts and contoured sur-faces. Easy to tear into convenient lengths yet will not shred. Roll size: 1½" x 50 yards

TRIM-KUT® discs - ReneWABLe edGeUse for edge blending, chamfering, deburring, paint preparation, surface finishing, light weld and stock re-moval. Tough, trimmable nylon composite backer conforms to uneven surfaces, run cooler. Aluminum oxide abrasive grain fused to backer eliminates the need for back-up pad. Use on metal, wood, fiberglass. Excel-lent for autobody and boat repair shops.

ARBoR SizE: 5/16-18 • PkG: 25 EAPart Max.no. diameter Grit Color RPM*6-438 3" 36, coarse Red 28,0006-439 3" 60, medium Orange 28,0006-440 3" 120, fine Green 28,000

STOrAge; If stored for extended periods of time, Trim-Kut Discs should be sealed in plastic at 50% (or more) relative humidity. Over time, nylon backing can dry out and lose its flexibility. IN COLD TeMPerATureS; Nylon backing can crack or shatter. Do not use in temperatures lower than 48° F. Avoid freezing.

TIP: Extend disc life 2-3 times. Renew TRIM-KUT's sharp cutting edge by running the edge against a clamped piece of steel scrap.

Adapter Mandrel

Part no. Size description996 1/4" Shank, Mandrel997 3/8"-24 UNF Adapter998 1/2"-13 UNC Adapter

TRIM-KUT® Adapters5/16-18 male thread. All Pkg: 1 each


ROLOCTM

Part Max. Pkgno. diam. Grit† RPM* Qty6-000 1½ Medium 30,000 506-003 1½ Coarse 30,000 506-004 2" Medium 20,000 506-005 2" Coarse 20,000 506-010 3" Medium 15,000 256-011 3" Coarse 15,000 256-013 4" Coarse 9,000 10

FLex-FInISHTM

6-425 1½ Medium 30,000 506-426 1½ Coarse 30,000 506-427 2" Medium 20,000 506-428 2" Coarse 20,000 506-429 3" Medium 15,000 256-430 3" Coarse 15,000 256-431 4" Medium 9,000 106-432 4" Coarse 9,000 10


Surface Conditioning discsONE-TWIST BUTTON STYLE MOUNTING SYSTEM. TWO POPULAR BRANDS! Heavy non-woven nylon, impregnated with abrasive, with a tough reinforced backing. Use for scratch and rust removal, light deburring, gasket removal. Blends ground welds on steel, stainless and aluminum. Note: medium is maroon in color, coarse is tan in color.

QUICK-LOKTM

discs(Abrasive Sanding Discs)ALUMinUM oXiDE CLoSED CoAT • RESin BonDEDDesigned for fast finishing and stock removal on ferrous metals. Use for blending or finishing metal surfaces, light weld removal, removing surface imperfections and mill marks. Offers a better grip than adhesive-back discs. Features a plastic roll-on locking system that quickly secures them to a disc holder.

(Compatible with 3M Roloc backup pads)Part Pkgno. diameter Grit Qty6-484 1" 36, coarse 1006-485 2" 36, coarse 1006-490 2" 40, coarse 1006-486 2" 80, medium 1006-487 2" 120, fine 1006-488 3" 36, coarse 50

For all button style locking discs. ¼" shank size. Compatible with Quick-LokTM, RolocTM and Flex-FinishTM discs. Pkg: 1 each.

Part Fits disc Max.no. diameters RPM*6-483 1" 30,0006-433 1½ 30,0006-434 2" 20,0006-435 3" 15,0006-436 4" 9,000

drive Holders


Angled Abrasive Flap discs

Aluminum Oxide Grit provides the excellent stock removal on low and medium carbon steels.

Part Grit Max. Pkgno. dia. Arbor Size RPM* Qty6-141 4" 5/8 hole 36 15,000 106-142 4-1/2" 7/8 hole 36 13,000 106-142A 4-1/2" 7/8 hole 80 13,000 106-142B 4-1/2" 7/8 hole 120 13,000 106-143 5" 7/8 hole 36 12,000 106-144 7" 7/8 hole 36 8,600 106-145 7" 5/8-11 hub 36 8,600 10

Grinds And Finishes In One easy Step. No need to switch from a Type 27 to a resin fiber disc, this disc does it all! Downtime is decreased, saving you time and money.Self-sharpening. New abrasive grain is continually exposed as the layered abrasive flaps slowly wear down providing rapid stock removal and consistent finishing. Lasts Longer Than Resin Fiber discs. Excellent for grinding metals like steel, aluminum, stainless steel.

Optimum Working AngleAngled flaps give consistent finish. More abrasive makes contact with the work surface. Great for curved and rough surfaces.

Sturdy Aluminum Backing Plate takes use and abuse.

Resin Fiber discs


Water repellent, aluminum oxide, resin coated fibre discs for fast metal removal, grinding welds & rust, and metal finishing. Plastic shrink wrapped for longer shelf life. All have 7/8" arbor hole.

Part no. diameter Grit Pkg6-041 4-1/2 24 50 6-042 4-1/2 36 50 6-043 4-1/2 80 506-044 5" 24 506-045 5" 36 506-046 5" 80 506-047 7" 24 506-048 7" 36 506-049 7" 80 50

Mounted Flap Wheels - mounted on 1/4" steel shank. Aluminum oxide - resin bond clothAll 1" wide, 80 grit (medium)

Part no. diameter Max. RPM* Pkg17-52004 1" 30,000 1017-52016 2" 25,000 1017-52028 3" 23,000 10

Back Up Pads - For Resin Fiber DiscsPart Centerno. diameter nut Size17-152 4" M10 x 1.2517-153 4-1/2 M14 x 2.017-154 4-1/2 5/8-1117-155 5" 5/8-1117-156 7" 5/8-1117-157 9" 5/8-11

Abrasive Flap Wheels


extra Long Flaps. Flat Working Angle. Offers the same features as angled discs except for the flap angle and length. The flat profile produces a consistent finish on contoured, flat and iirregular surfaces. Extra-long flaps increase disc life, saving valuable time and money.

Zirconium Oxide Grit provides the highest rate of stock removal. Excellent for stainless steels and high carbon steels.


Adapter nut KitAdapts flap discs with 7/8" arbor holes to fit common 5/8-11 threaded spindles. Part no. 6-146B

Part Grit Max. Pkgno. dia. Arbor Size RPM* Qty6-478 4-1/2" 7/8 hole 40 13,000 10

Flat Abrasive Flap discsLightweight Phenolic Backing Plate will not marr work surface.

Abrasive Hand PadsHeavy nonwoven nylon impregnated with abrasive particles. 6" x 9" pads for general purpose scuffing, cleaning, finishing and polishing operations on metal, wood and painted surfaces. Industrial grade.

Part no. Grit† Color Brand Pkg6-072 Medium Maroon Scotch-BriteTM 206-100 Medium Maroon Weiler® 206-489 Coarse Tan Weiler® 10

•Scotch-Brite is a trademark of the 3M Company

†Fine grit discs and pads available on special request, subject to minimum order quantity.


Section 14 Brushes

AAcid Brushes 14-4Adapters

Threaded Arbor Reducing 14-2Wire Wheel 14-1

ArborsCut Off Wheel 14-3Wire Wheel Brush 14-1; 14-2

BBench Brushes 14-4Braces, Broom Handle 14-6Broom Handles 14-6Brooms

Corn 14-5Floor 14-5Street 14-5Upright 14-5

BrushesAcid 14-4Bench 14-4Can, Wheel & Fender 14-4Chip & Oil 14-4Circular End 14-3Cup 14-2Disposable Paint 14-4End 14-3Fender 14-4Floor 14-5Hollow Center End 14-3Mighty-Mite® 14-2Paint 14-4Scratch 14-5Small Angle Grinder 14-2Small Welder's 14-5Tube Fitting 14-4Wire End 14-3Wire Wheel 14-1; 14-3

CCan Brush 14-4Corn Brooms 14-5Cut-Off Wheels

Adapters 14-3

FFloor

Broom Handles 14-6Brooms 14-5Squeegees 14-6

Fountain Tube Handle 14-4

HHandles

Broom 14-6Fountain Tube 14-4Truck Wash Brush 14-4

MMighty-Mite Brushes 14-2

RRubbers, Squeegee 14-6

SScratch Brushes 14-5Squeegees 14-6Street Brooms 14-5

TToothbrush, Welder's 14-5Tube Fitting Brush 14-4

UUpright Brooms 14-5

WWelding

Brushes 14-5Whisk Brooms 14-5Window Squeegees 14-6Wire

Cup Brush 14-2End Brush 14-3Scratch Brushes 14-5Wheel Brushes 14-1; 14-3

Wire Brushes 14-1; 14-5

14-II www.mpi-online.com • FAX: (219)-696-6413


Wire Wheel Brushes

Part Arbor Pkgnumber Size Qty6-420 1/2" 1 Pair6-421 5/8" 1 Pair6-422 3/4" 1 Pair6-423 7/8" 1 Pair6-424 1" 1 Pair


Part Wire Face Max.number dia. Size Width RPM*6-096 6" .010 1" 6,0006-097 6" .014 1-1/4" 6,0006-099 8" .014 1-1/2" 4,500

Part Wire Face Arbor Max.no. dia. Size Width Size RPM*6-102 6" .014 1/2 1/2-5/8 9,0006-103 6" .016 1" 1/2-5/8 9,0006-406 8" .016 5/8 1/2-5/8 6,0006-407 8" .016 1-1/8 5/8 6,000

Part Wire Face Arbor Max.no. dia. Size Width Size RPM*6-471 4" .020 3/16" 5/8-11 UNC 20,0006-472 6" .020 3/16 5/8-11 UNC 9,000

Part Wire Face Arbor Max.number dia. Size Width Size RPM*6-093 4" .012 1/2 3/8-1/2 12,5006-403 6". .006 1/2 1/2-5/8 6,0006-400 6" .010 3/4 1/2-5/8 6,0006-401 6" .006 3/4 1/2-5/8 6,0006-402 8" .010 3/4 1/2-5/8 6,000

Standard duty These wheels are highly flexible and densely filled with high quality crimped tempered wire, Ideal for light to medium duty surface prep on irregular surfaces. Available in Stainless and other sizes. Pkg Qty: 1

Heavy duty These brushes are heavily filled with highest quality tempered wire. They are designed as general purpose brushing tools for medium to heavy brushing applications. Has 2 inch center hole. Pkg Qty: 1

Note: Arbors must be ordered separately. See below.

Knotted - Heavy duty These brushes are designed for tough jobs. Highly suited for use in the welding and steel fabrication industries. Pkg Qty 1

ArborsFor use with heavy duty wire wheel brushes (above) with 2" center hole.

Twisted Knot Wire Wheel Brush

Stringer Bead Type

14-2 www.mpi-online.com • FAX: (219)-696-6413

Fixed 5/8"-11 threaded arbor holes can be adapted to fit most tool arbors. Use with grinding wheels, wire wheel brushes, and wire cup brushes.


Small Wire Cup BrushesFor Small Angle Grinders

Excellent for angle welds, tight operations, corners and curves. Industrial quality.

Part Trim Wire Max Pkgnumber dia. Arbor Length Size RPM* Qty6-384 2-3/4" 5/8-11 UNC 7/8" .020 14,000 16-385 2-3/4" 1/2-13 UNC 7/8" .020 14,000 16-387 2-3/4" 10 mm x 1.50 7/8" .020 14,000 1

Part Trim Wire Max Pkgnumber dia. Arbor Length Size RPM* Qty6-463 3" 1/2-13 UNC 7/8" .014 14,000 16-465 3" 10 mm x 1.50 7/8" .014 14,000 1

Twisted Knot Cup Brush

Crimped Wire Cup Brush

Twist Tuff Knot Cup Brushes Heavy duty double RowLow flexibility and high impact action. Knots twisted to the end. Wire size: .023" • Trim length: 1-3/8" Pkg Qty: 1Part Max.number dia. Arbor RPM*6-410 4" 5/8-11 9,0006-411 6" 5/8-11 6,600

Standard Wire Cup Brushes

Crimped Wire Cup BrushesWire size: .014" • Trim length: 1-1/8"

Part Max.number dia. Arbor RPM*6-119 4" 5/8-11 9,0006-120 6" 5/8-11 6,600

Part Fixed Adaptednumber Thread Size Thread Size6-473 5/8-11 UNC M-10 x 1.256-474 5/8-11 UNC M-10 x 1.506-475 5/8-11 UNC 3/8-16

Reducing Adapters


Hollow CenterPart Outside Wire Max.number diameter Size RPM*6-114 1-3/4 .012 13,0006-115 2" .012 13,0006-116 2-1/2 .012 13,000

StraightPart Outside Wire Max.number diameter Size RPM*6-111 1/2 .010 25,0006-112 3/4 .014 22,0006-113 1" .014 20,000

KnotPart Outside Wire Max.number diameter Size RPM*6-092 1-1/8 .020 20,000

CircularPart Outside Wire Max.no. diameter Size RPM*6-117 3" .008 20,0006-118 3" .014 20,000


Low Profile drive ArborsInner locking nut. Low profile shank adapter for use with Cut-Off Wheels and Wire Brushes.

Part Arbor Stem Max.no. diam. diam. RPM*6-109 3/8" 1/4" 20,0006-110 1/2" 1/4" 20,000

Quick Change drive ArborsQuickly adapts small diameter Cut-Off Wheels and Wire Brushes without removing arbor from tool.

Part Arbor Stem Max.no. diam. diam. RPM*6-104 1/4" 1/4" 20,0006-105 3/8" 1/4" 20,0006-106 1/2" 1/4" 20,000

Wire end Brushes

1/4 Shank.

1/4 Shank.

1/4 Shank.

1/4 Shank.


disposable Chip & Oil Brushes

Vehicle Wash BrushesGreat for windows too! Soft, flagged white polystyrene trim with protective plastic bumper, plastic block. Accepts fountain tube handle (below), threaded wood handles and tapered handles. Order handles separately. Block size: 9-1/2" x 2-3/4". Trim length: 3"Pkg: 12 each Part no. 6-002

Metal handle attaches to water hoses or nozzles for convenient water flow when scrubbing vehicles. For use with truck wash brush above. Size: 7/8" dia. X 5 ft. long. 12 per carton. Part number 6-001

Excellent disposable brush for oiling, gluing, chip removal, and painting. White hog bristle, plated ferrule, wood handle. Imported.

Fountain Tube Handle

Can, Wheel & Fender BrushesSynthetic fibre is resistant to gasoline and petroleum based substances. Dairy, automotive and industrial applications. Plastic block: 20" x 3". Face: 5-1/2" x 6-1/2". Pkg: 12 each. Part no. 6-121

Acid BrushesA handy brush for applying solder fluxes, oils, greases and glues. Tin handles. Horsehair filled.

Part Trim Trim Brush Tipnumber diam. Length Style Style6-122 1-3/16 2-5/8 Med. Tampico Pointed6-123 1-1/16 3" Stiff Polypropylene Pointed6-124 1" 2-1/2 Soft Bristle Round

Miscellaneous Brushes

Tube Fitting BrushesInternal type wire brush cleans and preparing copper tubing and sweat fittings. Plastic handle.

Part Brush Pkgnumber Width Qty6-415 1" 366-416 1-1/2" 366-417 2" 366-518 3" 126-419 4" 12

Parts BrushesPlastic handles. Bright metal ferrules. Pkg: 12 each

Part Brush Pkgnumber Width Length Qty6-125 1/2" 6" 48

Fine horsehair reinforced with nylon. 10" lacquered wood block. Pkg: 1 each. Part number 6-127

Bench & Counter Brush

Part Brush Pkgnumber Width Qty6-136 1/4 16-137 3/8 16-138 1/2 16-139 5/8 2


Wire Scratch Brushes

BroomsIndustrial quality broom for light sweeping on most any type of floor. Heavy duty triple stitched and steel wire banded. 12" sweep. 1-1/8" diameter x 38" long handle. 56" overall length. Pkg: 6 each. Part no 6-185

Whisk BroomsSelect palmetto fibre. Double stitched for extra strength. Compact 7-1/2" overall. Pkg: 12 each. Part no 6-129

Shoe HandlePart Rows of Pkgnumber description Wire Qty6-133 Carbon 4 126-134 Carbon w/Scraper 4 126-135 Stainless 4 12

Curved Handle6-130 Carbon 3 126-131 Carbon w/Scraper 3 126-132 Stainless 3 12

Small Welder's Brush Handle6-128 Stainless 4 36

Shoe Handle

Small Welder's

Curved Handle

Upright Corn

Floor BrushesWith lacquered hardwood blocks. Broom handles and handle braces sold separately.

Medium - Black SyntheticFor fine to medium soil. Water and oil resistant. 3" trim.Part Brush Pkgnumber Width Qty6-179 18" 16-183 24" 1

Coarse - Red SyntheticAn all purpose brush for most liquids or solid debris on medium to coarse surfaces. 3¼" trim.Part Brush Pkgnumber Width Qty6-180 18" 16-184 24" 1

Use threaded handle #6-186.



extra Coarse - PalmyraA very good parking lot brush; use for heavy debris on rough or coarse surfaces. 4" trim. Can be used wet or dry. Part Brush Pkgnumber Width Qty6-618 18" 16-624 24 1

Can be used wet or dry. 16" wide, 6" trim length. Part No. 6-181

Palmyra Street Broom

Use tapered handle #6-187


Broom HandlesDie-Cast

Threaded EndPart no. Material Style Pkg6-186 Wood 60" Threaded 126-187 Wood 54" Tapered 126-188 Fiberglass (hollow) 60" Threaded 1

Handle Braces

Steel Frame Floor Squeegees PART nUMBeR PkgSize Squeegee extra Rubbers QtyStraight Squeegees 24" 6-163 6-173 1Curved Squeegees 36" 6-167 6-175 1

Use tapered handle #6-187 - order separately.

Window SqueegeesPlated steel frame and handle socket. Angle front type. Two quality rubbers securely fastened by machine screws. PART nUMBeR PkgSize Squeegee extra Rubbers Qty12" 6-160 6-168 118" 6-161 6-169 1

Use tapered handle #6-187 - order separately.

Mops & Squeegees

Wet Mop Heads & HandlesIndustrial grade. Loose end, 8-ply cotton mop heads. Mop handles are 54" screw type (sold separately).

PART nUMBeR PkgWeight Mop Head Mop Handle Qty24 oz. 6-054 6-190 132 oz. 6-055 6-190 1

dust Mops, Metal Frames & HandlesTie-on style, 4-ply cotton mop heads. Metal support frames are 5" wide. Dust mop handles 6-189 are 54" long. All sold separately. Part numbers dust Metal PkgSize Mop Frame Qty24". 6-050 6-051 136" 6-052 6-053 1

Tapered EndFiberglass

Handle

6-176Standard Clamp Brace

6-177Heavy Duty

Tee-Pee Style Brace


Section 15 Chemical Index

A

Absorbent 15-13Accessories 15-30Adhesive Remover 15-3Adhesive Removers

Water Based 15-3Adhesives 15-1, 15-3

Black Max® 15-1Cyanoacrylate 15-1Fast Tack 55 15-3Fast Tack 85 15-3Fast Tack 87 15-3Fast Tack 92 15-3Fixmaster 15-1, 15-2Fixmaster®

Magna-Crete 15-2Heavy Duty 15-3Hi-Tack 15-17Hi-Temp 15-3Instant 15-1J-B Weld 15-2Magic Metal 15-2Prism 15-1RTV Silicone 15-19Super Bonder® 15-1Weatherstrip 15-1

Air Tool Oil Light Viscosity 15-23Aluminum

Polish/Cleaner 15-12Anaerobics 15-4, 15-5Anti-Corrosion Washers 15-14Anti-freeze

Gas Line 15-28Windshield Washer 15-28

Anti-Seize Lubricant 15-21Copper 15-21Nickel 15-21Silver 15-21

Anti-Spatter 15-14Automatic RTV Silicone Rubber Adhe-

sive 15-20Automotive Care


per 15-14Battery Terminal Protective Wash-

ers 15-14Brake Fluid Pump 15-31Disc and Drum Brake Fluid 15-28Gas Line Antifreeze & Fuel Dryer 15-28Lock-Thaw 15-29Starting Fluid 15-28Windshield Spray De-Icer 15-29Windshield Washer Ready Mix 15-28

Aviation Gasket Sealant 15-18

B

Ball Tip Markers 15-17Barrel

Faucets 15-31Barrel Pump 15-30

Rotary 15-30Bathroom Cleaner 15-13Battery

Anti-Corrosion Washers 15-14Cleaner 15-12Terminal

Washers 15-14Battery Protector 15-13Battery Terminal Corrosion Stopper 15-

14Belt Dressing 15-14Big Rig Paints 15-16Black Max® Adhesive 15-1Blaster Penetrant 15-26Blast-Off Safety Solvent - NONFLAM-

MABLE 15-8Brake

Fluid 15-28Brake Cleaner

NonChlorinated 15-9Nonflammable 15-9

Brake Fluid Pump 15-31Brush-On Electrical Tape 15-17Brute Lube 15-23Bug Spray 15-29Bulk Safety Solvent 15-9

C

Carb & Choke Cleaner 15-9Car Wash & Wax 15-7Caulking Gun 15-20Caulk, Silicone 15-20CHAIN AND CABLE LUBRICANT,

FOAMING 15-23Chemicals 15-1Choke Cleaner 15-9Citra Crystals Concrete Cleaner 15-6Citra Crystals Powdered Concrete Floor

Cleaner 15-6Citrus

Degreaser 15-6Cleaners 15-6, 15-13, 15-14

Aluminum and Stainless Polish 15-12Battery Terminal 15-12Blast-Off Safety Solvent - NONFLAM-

MABLE 15-8Choke & Carb Cleaner 15-9Concentrated Car Wash & Wax 15-7Concentrated Truck Wash 15-7Contact & Circuit Board Cleaner

III 15-9Contact & Circuit Board Cleaner II -

NONFLAMMABLE 15-9Floor


Gelled Engine Degreaser 15-8Glass Plus Multi-Purpose Glass Clean-

er 15-7Hand Cleaners

Blue LabelTM Waterless Cream Hand

Cleaner 15-10Citrus-Based Waterless Hand Clean-

ers 15-10Extra Heavy Duty 15-11Heavy Duty Paint & Resin Remov-

ing 15-11Light Duty 15-11Natural Citrus 15-11Paint & Resin Removing Hand

Cleaner 15-10Towels/Wipes 15-12Waterless 15-10

Industrial Strength Cleaner Wipes 15-12

Liquid Steam Cleaning Concen-trate 15-6

Multipurpose Cleaner & Degreas-er 15-6

NonChlorinated Brake Cleaner 15-9Nonflammable Brake Cleaner 15-9Orange Degreaser 15-6Pure EZ Degreaser 15-6Safety Solvent 15-9Steel Shine Metal Cleaner & Polish 15-

12Streak-Free Glass & Mirror Clean-

er 15-7Vandalism Mark Remover 15-10

Cleaning solvent 15-8Clean Sweep 15-13Clover 15-28Coatings 15-14, 15-17

Inverted Marker 15-16Metal Parts Protector 15-14Quick-Cote+ 15-14Red Insulating Varnish 15-15

Concrete Cleaner 15-6Contact & Circuit Board Cleaner II - NON-

FLAMMABLE 15-9Contact Cleaner 15-9Copper Anti-Seize 15-21Crack Sealer (Foam) 15-29CUTTING AND TAPPING FLUID 15-

22Cutting Fluid 15-22, 15-23Cyanoacrylates 15-1

D

DegreaserEngine 15-8

De-IcerLock 15-29Windshield 15-29

Disinfectant Cleaner 15-13Wipes 15-13

Disposable Latex Gloves 15-31D'Limonene Products. See Citrus CleanersDrum

Faucets 15-31Dry Graphite Lube 15-23DRY MOLY FILM LUBRICANT AND

COATING 15-22

15-II FAX:(219)-696-6413 • www.mpi-online.com • [email protected] 07/2013

E

Economy Silicone Lubricant 15-27Edge Creme Cutting Lube 15-22Edge Lube 15-22Electrical

Contact & Circuit Board Cleaner II - NONFLAMMABLE 15-9

Contact Cleaner 15-9Electrical Grade Silicone Spray 15-27Electrical Tape, Brush-On 15-17Electric Motor Cleaner 15-8Enamel Spray Paint 15-15Engine Degreaser 15-8Engine Starting Fluid 15-28Epoxy 15-1, 15-2

Fast Cure 15-1Equipment Cleaner 15-7

Battery Terminal 15-12Choke & Carb Cleaner 15-9Safety Solvent 15-9

Equipment CleanersGelled Engine Degreaser 15-8

Ether (Starting Fluid) 15-28

F

Fast Orange 15-11Fast Tack 55 15-3Fast Tack 85 15-3Fast Tack 87 15-3Fast Tack 92 15-3Faucets, Drum 15-31Fixmaster 15-2Fixmaster® Poxy-Pak 15-1FixmasterTM Pipe Repair Kit 15-28Flange Sealant 518 15-18Floor Cleaners


Floor SweepingClean Sweep 15-13Safety Absorbent 15-13

Foam & Fabric Adhesive 15-3Foam Insulation 15-29Fuel Cylinders, Propane 15-29Fuel Line Anti-Freeze 15-28Fuel System Dryer 15-28

G

Galvanized Paint Tray 15-30Gasket

Adhesives/Sealants 15-17, 15-18Makers 15-18, 15-19, 15-20Remover 15-20Sealant, Aviation 15-18Sealant (Hi Tack) 15-17Sealant No. 2 15-18

Gasket Dressing 15-18Gasket Eliminator 15-18Gas Line Anti-Freeze 15-28Gear Lube 15-24Gelled Engine Degreaser 15-8Glass & Mirror Cleaner 15-7

Glass Plus Multi-Purpose Glass Clean-er 15-7

Gloves 15-31, 15-32Glue, Super Bonder® 15-1Graffiti Remover 15-10

Wipes 15-12Graphite Lubricant 15-23Grease

Dielectric 15-24High Temp. 15-25Lithium 15-24Lubriplate 15-25Motor Assembly 15-25Multi-Purpose 15-24Red 15-26Wheel Bearing 15-25

GREASEImpact 15-24White Lithium 15-24

Great Stuff 15-29

H

Hand Cleaner 15-10Hand Cleaner Dispensers 15-10Hand Cleaners


Citrus-Based Waterless Hand Clean-ers 15-10

Dispensers 15-10Extra Heavy Duty 15-11Heavy Duty Paint & Resin Remov-

ing 15-11Light Duty 15-11Natural Citrus 15-11Paint & Resin Removing 15-10Waterless 15-10

Hard Coat Finish 15-17High Solids Spray Paint 15-15High Temp. Grease 15-25Hi-Tack Sealant 15-17Hi-Temp Anti-Seize Compound

Spray 15-21Hydraulic

Jack Oil 15-24Hydraulic/Pneumatic

Thread Sealants 15-4

I

Impact Grease 15-24INSECTICIDE 15-29Instant Adhesives 15-1Instant Gasket 15-19Insulation, Aerosol Foam 15-29Inverted Marker 15-16

J

Jack Oil 15-24J-B Weld Epoxy 15-2Joint Compound 15-5

K

Kwik Wipes 15-12

L

Lapping and Grinding Compound 15-28Latex Gloves 15-31Liquid Electrical Tape 15-17Liquid Steam Cleaning Concentrate 15-6Lock Thaw Deicer 15-29Loctite. See ChemicalsLoctite® Threadlockers 15-2LPS® Cutting Lubricants 15-22Lubricants 15-25, 15-27Lubriplate Greases 15-25

M

Machinists' Coolant 15-23Magic Metal Epoxy 15-2Magna-Crete 15-2Marking Wand 15-16Metal Armor 15-14Metal Parts Protector 15-14Metal Polish 15-12Miscellaneous Chemicals 15-28, 15-29Mist Adhesive Spray 15-3Moisture Displacer 15-27Moisture Guard 15-26MOLY FILM, Dry 15-22Motor Assembly Grease 15-25Motor Cleaner, Electric 15-8Multipurpose Cleaner/Degreaser 15-6Multi-surface Disinfecting Wipes 15-13

N

ND Vibra-Tite 15-3Never-Seize 15-21Nickel Anti-Seize Lubricant 15-21No. 2 Gasket Sealant 15-18Nozzle Shield, Safe-De-Spat 15-14Nuts Off 15-27

O

OilAir Tool 15-23Cutting 15-22Hydraulic Jack 15-24Lubricating 15-25Lubricator 15-21

Oil Dry 15-13Open Gear Lube 15-24Orange-based chemicals. See Citrus Clean-

ers

P

Pads, Sorbent 15-32Painter's Mitt 15-30Paint Markers 15-17Paint Marking Wand 15-16Paint Roller Covers 15-30Paint, Spray 15-15Parts Cleaning Solvent 15-8PB B'laster Penetrant 15-26Penetrant

MAINTENANCE PRODUCTS INC. • (800) 523-2367 (219) 696-6411 15-IIIRevised 07/2013

Nonflammable 15-26Penetrants

Nuts Off 15-27Penetrating Lubricant, NONFLAMMA-

BLE 15-26Penetrats

Blast Off 15-26HOIL 15-26

PipeDope 15-5Joint Compound 15-5Thread Compound 15-5Thread Cutting Oil 15-22

Pipe Joint Compound 15-5Pipe Repair Kit 15-28Plastic Tray Liner 15-30Porosity Sealant (Loctite) 15-4Premoistened Towels 15-12Press Fit Assist 15-5Press Fit Repair 15-5Pressure

Wash Detergent 15-6Prism Gel Adhesive 15-1Propane 15-29Protective Washers, Battery 15-14Pump

Hand Cleaner 15-10Pure EZ Degreaser 15-6

Q

Quick-Cote+ 15-14Quick Metal® 15-5QuickStix 248 15-4QuickStix 268 15-4QuickStix534 15-18Quick Stix 534 Hi-Tack Gasket Dress-

ing 15-18QuickStix 561 15-5QuickStix 668 15-18QuickStix C5-A 15-21

R

Red Grease 15-26Red Insulating Varnish 15-15Red Silicone 15-19RED SPRAY GREASE 15-23Retaining Compound 15-18Roller Covers, Paint 15-30Rotary Barrel Pump 15-30RTV Sealants 15-19RTV Silicone 15-19Rubber

Gloves 15-32RTV Silicone 15-20

Rubber Adhesive, Silicone 15-20Rust Preventative 15-26, 15-27Rust Preventative Finish 15-17

S

Safe-De-Spat 15-14Safety

Solvent Degreaser 15-8

Safety Absorbent 15-13Sealant

Aviation Gasket 15-18Hi Tack Gasket 15-17Pipe Joint Compound 15-5Thread 15-5

Sealants 15-18, 15-20Secures Gears, Pro Lock 15-5Silicone

Economy Silicone 15-27RTV 15-19Spray

Electrical Grade 15-27Solvo-Rust Penetrant 15-27Sorbent Pads 15-32Sorbent Pillows 15-32Sorbent Socks 15-32Sound Deadener 15-15Spray 15-3Spray Bottles 15-30Spray Paint 15-15Spray Paint, Big Rig 15-16Spray Paint, High Solids 15-15Spruce Spray Paint 15-15Stainless Plumber's Putty 15-29Stainless Steel

Polish 15-12Starting Fluid 15-28Stay Bathroom Cleaner 15-13Steam Cleaning Concentrate 15-6Super Bonder® 15-1Super Lube® w/Teflon® 15-25Super-Tef w/Teflon® 15-27Super Weatherstrip Adh. 15-1Sweeping Compounds

Clean Sweep 15-13Synthetic Lubricant 15-25

T

Tap Magic 15-22Teflon®

Lubricants 15-25, 15-27Pipe Joint Compound 15-5

ThreadCutting Oil 15-22Sealant, Vibra-Tite 15-3Sealant w/Teflon 15-5

Threadlockers 15-2Thread Sealant 565 PST 15-5Thread Sealants 15-4, 15-5

Hydraulic/Pneumatic 15-4Locquic 7649 15-5Permanent 15-4Pipe Joint Compound 15-5Primer 15-5QuickStix 248 15-4QuickStix 268 15-4QuickStix 561 15-5Removable 15-4Teflon® 15-5Threadlocker 242® 15-4Threadlocker 262® 15-4Threadlocker 290 15-4

Thread Sealant 545 15-4Thread Sealant 565 PST 15-5

Toilet/Bathroom Cleaner 15-13Tools

Caulking Gun 15-20Towels, Hand Cleaning 15-12Trigger Sprayers 15-30TRIPLE PLAY FLYING & CRAWLING

INSECTICIDE 15-29Truck Wash Concentrate 15-7Turbo Towels 15-12

U

Ultra Blue RTV, Loctite 15-19Ultra Copper RTV, Loctite 15-19Undercoating, Rubberized 15-15

V

Valve-Action Markers 15-17Valves

Barrel Faucet 15-31Drum 15-31

Vandalism Mark Remover 15-10Varnish 15-15Vibra-Tite 15-3ViperLube 15-25

W

WashersBattery 15-14

Wasp & Hornet Killer 15-29WD-40 15-26Weatherstrip Adhesive 15-1Web Adhesive Spray 15-3Weldors Anti-spatter 15-14Wheel Bearing Grease 15-25White Lithium Grease 15-24Wicking Grade Loctite 15-4Windshield Antifreeze 15-28Windshield De-Icer 15-29Wipes, Turbo Towels 15-12Wire

RopeLubricant 15-24

Z

Zinc galvanizing spray 15-14

15-IV FAX:(219)-696-6413 • www.mpi-online.com • [email protected] 07/2013


Super Bonder® Instant Adhesive

AdhesivesPrism® Instant Adhesive Gel

Prism® is the ideal instant adhesive for porous substrates. Prism® is a surface insensitive cyanoacrylate for difficult-to-bond substrates, including rough, porous and acidic surfaces. Fills gaps on poorly mated surfaces. Non-run gel formulation is great for vertical applications. Applications: leather, metals, rubber, paper, foam, soft woods, plastics and ceramics. Gap fill: .010". Color: Clear. Fixture: 15 seconds. Full cure: 24 hours. Temperature range: -65°F to 180°F.

Part number Size Pkg QtyLT-45404 ...........3 gm. (.10 oz.) tube .....................10 Formerly "Power Gel"

Contact Adhesive Fast drying, waterproof neoprene based adhesive bonds rubber, wood, metal and other porous materials. Withstands temperature extremes and is resistant to gasoline, kerosene and other solvents. Applications: insulation, moldings, weather-stripping and carpeting. Sets to tack-free surface in 3-4 minutes before assembly. Allows repositioning after initial contact. Temperature limit: +180° F. Color: yellow. Part number Size Pkg QtyLT-30537 .......................5 oz..................................12 Formerly "Super Weatherstrip Adhesive"

Super Bonder® is the general purpose instant adhesive liquid everyone needs in their tool box for general maintenance and repair. It sets instantly with no clamping, no mixing, no waiting; and it bonds just about anything. Strong bonds on metal, rubber, plastic and other nonporous surfaces. Applications: rubber belts, bumpers, wires, plastic nameplates, signs, trim, etc. Color: Clear. Fixture: 5-50 seconds. Full cure: 24 hours. Temperature range: -65°F to 180°F.

Part number Size Pkg QtyLT-49550 ........... 1 oz. (28 gm) bottle .....................10 Formerly "Super Glue"

Black Max® is the instant adhesive choice for parts that encounter shock, vibration or thermal cycling. This black, toughened cyanoacrylate adhesive uses elastomers to withstand impact and challenging environmental conditions. Withstands impact, solvents, and thermal cycling. No mixing, heating, or cIamping. Applications: most rubber, plastic and metal substrates; belts that will see vibration; rubber seals on underground junction boxes. Gap Fill: .006". Color: Black. Fixture: 90 seconds. Full cure: 24 hours. Temperature range: -65°F to 225°F.

Part number Size Pkg QtyLT-38004 ...........3 gm (.10 oz.) tube .....................10LT-38050 ........... 28 gm (1 oz.) bottle .....................10 Formerly "Black Belt"

Black Max® Toughened Instant Adhesive

This fast cure, high strength liquid epoxy bonds virtually any material in minutes. Repair, fill and seal holes, cracks and worn surfaces. Convenient re-sealable syringe dispenser means no measuring, no mess, and no waste. Applications: Metal, ceramic, concrete, wood, glass, and plastic. May be drilled, sanded, machined, and painted. Working time: 1 minute. Fixture time: 4-6 minutes. Full cure: 1 hour. Adhesive tensile shear: 2300 psi. Temperature limit: 250° F. Color: clear.

Part Pkgnumber Size QtyLT-1324007 ...................1 oz..................................12

Fixmaster® Poxy-Pak Fast Cure epoxy

15-2 FAX:(219)-696-6413 • www.mpi-online.com • [email protected] 07/2013

Threadlocker 222MS Low Strength/Small Screws

Fixmaster® Magna-Crete® Concrete Repair KitTwo-Component, rapid setting concrete repair, anchoring and grouting system. Use to repair or restore floors, ramps, loading docks, rail grouting, leveling and setting machinery, grouting bedplates and soleplates, and anchoring bolts and handrails. Chemical resistant to most common liquids and chemicals. Bonds to concrete, wood, glass, steel and other construction materials. Nonshrinking. Compressive strenght; 13,000 psi. Coverage: 4.8 sq ft per container. Fixture speed: 15 minutes. Functional cure: 1-2 hours. Max. temperature; 2000°F Color: grey.

Part number Size Pkg QtyLT-95551 ................... 1 Gal. Kit ...............................1 *Five gallon kit available on request.

Adhesives

PRe-MeASURed One-SHOT CUPS No mess, no waste. Bonds in 5 to 15 minutes. Excellent chemical resistance. Fills porosities and can be used to build up worn parts. Ideal for bonding metal, glass, hard plastics, marble, ceramic, brick, concrete and wood. Working time: 5 minutes. Fixture time: 10 minutes. Full cure: 12 hours. Adhesive tensile shear: 2000 psi. Temperature limit: +180° F. Color: gray.

Part number Cup Size Cups Per Can Pkg QtyLT-21425.............4 gm...............10..................10 cans *Packaged in resealable cans

Fixmaster® Fast Cure epoxy Mixercups

The worlds finest cold-weld. Drill it! Grind it! Machine it! Indispensable for mechanics, farmers, homemakers and almost everyone! Applications: valve seats, cylinder sleeves, engine blocks, torn keyways, fuel tanks, water tanks and tubs, body shop repairs, press fit bearings, leaks in pipes, weld cracks and pin holes, aluminum boats, porcelain, ceramic and more! Nonconductive. Tensile strength: 3,960 psi. Handling strength: 4-6 hours. Full cure: 15 hours. Temperature limit: 600° F. Color: gray.

Part number Size Pkg Qty30-002 .........1 oz. Twin Tubes (carded) ..................6

Magic Metal Copper Filled epoxy Putty

Magic Metal can be drilled, tapped, filed, sanded, machined or painted within an hour! Corrosion-resistant and wear-resistant bronze epoxy putty for use on all metals, wood, concrete, brick, glass, ceramic and plastic. Hand kneadable putty stick is easy to measure. Use on tanks, welds, pipes, cracks, pin holes and more. Use to strengthen weakened parts. Tensile strength: 8,200 psi. Fixture time: 10 minutes. Full cure: 1 hour. Temperature limit: 360° F. Color: bronze.

Part number Size Pkg Qty16-0011..................4 oz. stick..................12 *Packaged in resealable tube

Cold Welding Compound

Formulated for easy removal of miniature screws 1/4" (6mm) diameter and smaller, long engagement length fasteners and components requiring occasional adjustment. Parts can be disassembled with hand tools. Applications: miniature screws, adjustment screws, calibration screws, meters and gauges. Fixture speed: 20 minutes. Full cure: 24 hours. Temperature range: -65°F to 300°F. Color: purple.

Part number Size Pkg QtyLT-22221 ......................10 ml.................................10 *Formerly "Locks Screws" (28653) **50 ml and 250ml bottles available on special request.


Adhesivesnd VIBRA-TITe Formula 3

Use on male or female threads of virtually any material or finish. Dries to the touch within seconds, ready for assembly in just a few minutes! Fasteners pre-coated with

Vibra-Tite can be stored indefinitely. Pre-cleaning not required except for wiping off any visible oil on threads. Parts coated with Vibra-Tite can be easily adjusted, removed, and reused 5 or more times. Minimizes galling and stripping of soft threads during reuse. Use on fasteners of any size. Adheres to all metals and finishes. Can be used on plastic and nylon screws. Shelf life: Indefinite. Cure time: 5-10 minutes. Temperature range: -65°F to 165° F. Appearance: Red

Part number Size Pkg Qty30-001 .............1 oz. brush-top bottle....................10

Fast Tack 85 Web Adhesive Spray

Fast Tack 85 Adhesive spray is a high performance aerosol designed for temporary or permanent bonding. Ideal for porous or non-porous surfaces. Waterproof, flexible, transparent and non-staining, bonds to a wide range of substrates. Contains no chlorinated solvents or ozone depleters. (Formerly 16-0063B)Part number Size Pkg QtySW-085 ................. 12 oz. Aerosol .........................12

Fast Tack 87 Mist Adhesive Spray

Fast Tack 87 General Purpose Mist Adhesive is a high performance mist adhesive used for both tem-porary and permanent bonds. It is a versatile general purpose adhesive ideal for use in packaging, lightweight bonding and fabricating, labeling and shipping applications. (Formerly 16-0048B)

Part number Size Pkg QtySW-087 ................. 12 oz. Aerosol .........................12

Fast Tack 55 Foam & Fabric Adhesive

FAST TACK 55 is fortified with high solids for stronger, longer bonds. The snorkel tip providesuni-form, soft glue lines that will not dimple. The quick tack and low soak-in feature leaves more adhe-sive on the surface of the substrate which results in stronger bonds.Effectively bonds fabric to foam, metal, or wood surfaces, and to itself. Offers quick tack and high coverage, while providing a strong bond. It does not darken, nor does it leave a residual odor. Not recommended for bonding vinyl. (Formerly 16-0049B)Part number Size Pkg QtySW-055 ................. 13 oz. Aerosol .........................12

Fast Tack 92 Hi-Temp Heavy duty Trim Adhesive

Fast Track 92 is a contact adhesive designed for bonding vinyl tops, heavyweight headliners and hood silencer pads where high strength and heat resistance are needed. It features a high immedi-ate bond strength with a non-misting, lace-like spray. (Formerly 16-0053B)

Part number Size Pkg QtySW-092 ................. 12 oz. Aerosol ...........................1 *Sold by the case (12 per case)

Water Based Multi-Purpose Adhesive RemoverRemoves adhesives from glass, Plexiglas; vinyl and poly banners, painted aluminum, auto paint, and many other surfaces.Water-soluble, non-flammable.For use only on oil-based enamel and fully-cured painted surfaces.Not recommended for use on latex paint backgrounds. (Formerly 16-0047B)

Part number Size Pkg QtySW-894 ................. 12 oz. Aerosol ...........................1


Anaerobics & Thread SealantsThreadlocker 262® Permanent Strength (Red)

Threadlocker 262® is a permanent, high strength threadlocker that locks large fasteners and offers heavy duty protection against shock and vibration. Use Locks Studs on large fasteners from 3/8" to 1" diameter. Resists solvents, oils, and water immersion. Localized heating and hand tools are required to separate parts. Applications: all fasteners that must withstand heavy shock, vibration, or extreme environmental or chemical conditions. Fixture speed: 20 minutes. Full cure: 24 hours. Gap fill .005". Temperature range: -65°F to 300° F. Color: red.

Part number Size Pkg QtyLT-26221 ......................10 ml.................................10 *Formerly "Locks Studs" (81791, 81792)LT-26231 ......................50 ml.................................10 **250ml bottles also available on special request.

QuickStix 248 Medium Strength Blue ThreadlockerMuch like 242 liquid, 248 QuickStix is a removable strength threadlocking adhesive. 248 is especially well suited for fasteners up to 1/2" in diameter. Parts can be separated using hand tools. Color: Blue

Part number Size Pkg QtyLT-37684 .......................9 gm ....................... 1 CASE *Sold by the case (10 per case)LT-37087 ......................19 gm ...................... 1 CASE

QuickStix 268 High Strength Red ThreadlockerMuch like 262 liquid, 268 QuickStix is a high strength threadlocking adhesive. 268 is especially well suited for fasteners from 1/4" to 3/4" in diameter. Color: Red

Part number Size Pkg QtyLT-37685 .......................9 gm ....................... 1 CASE *Sold by the case (10 per case)LT-37686 ......................19 gm ...................... 1 CASE

Threadlocker 242® Removable Strength (Blue)Threadlocker 242® is a removable strength threadlocker especially well suited for small fasteners between 1/4" and 3/4" diameter. Parts can easily be disassembled with hand tools. Applications: machine tools, presses, pumps, compressors, mounting bolts, gearboxes. Fixture speed: 20 minutes. Full cure: 24 hours. Gap fill .005". Temperature range: -65°F to 300° F. Color: blue. Part number Size Pkg QtyLT-24221 ......................10 ml.................................10 *Formerly "Locks Nuts" (81788, 81789)LT-24231 ......................50 ml.................................10 **250ml bottles also available on special request.

A low viscosity, penetrating threadlocker that wicks along the threads of pre-assembled fasteners to secure them in place. Prevents vibration loosening on small diameter fasteners to 1/2". Seals porosities in welds and metal parts. Localized heating and hand tools are needed for disassembly. Applications: pre-assembled fasteners, instrumentation screws, electrical connectors, carburetors. Fixture speed: 10 minutes. Full cure: 24 hours. Gap fill .004". Temperature range: -65°F to 300° F. Color: green.

Part number Size Pkg Qty *Formerly "After Lock" (81794)LT-29021 ......................10 ml.................................10 **50 & 250ml bottles also avail on special request

Threadlocker 290 Wicking Grade

Thread Sealant 545 Hydraulic/Pneumatic Sealant Seals hydraulic and pneumatic fittings without danger of contamination. It contains no fillers or particles and disassembles with hand tools. Applications: pneumatic fittings, shop air hoses and lines, hydraulic fittings, O-ring fittings, servo mechanisms. Pressure resistance: 10,000 psi. Seals to operating pressure in 4 hours. Full cure: 12-24 hours. Temperature range: -65°F to 300° F. Color: purple. Part number Size Pkg QtyLT-32429 ......................10 ml.................................10 *Formerly "Hydraulic Sealant" (51456, 81802)LT-54531 ......................50 ml.................................10 **250ml bottles also available on special request.


This chemical resistant sealant outperforms teflon tape. Non-hardening sealant has the added lubricity of Teflon for easy disassembly of metal pipes. Resistant to most shop fluids and gases. Seals to 5,000 psi Temperature range: -60°F to 300° F. Color: white.

Part number Size Pkg QtyLT-1527514 ............. 1 pt (16 oz.) ..........................12

A low viscosity, fast-curing adhesive used for bonding non-threaded metal-to-metal assemblies. Prevents wear on new parts and restores fit to worn parts. Use on bearings, bushings, sleeves, shafts, keys, splines and cylindrical assemblies. Allows slip fits instead of press fits. Shear strength: 3,000 psi. Gap fill: .005". Fixture time: 10 minutes. Full cure: 24 hours. Temperature range: -65°F to 300° F. Color: green.

Part number Size Pkg Qty *Formerly Prolock Secures Gears (81797)LT-60921 .................10 ml. bottle ...........................10 **50 ml bottle also available on special request

Anaerobics & Thread SealantsRetaining Compound 609 General Purpose

Repairs worn shafts, couplings, and housings in one hour. Non-running gel fills imperfections and gaps up to .020". Repair worn keyways, loose set screws, form shims in place, stop bearing spin-out, and protect new parts from wear. Fixture speed 10-30 minutes. Full cure 1-2 hours. Gap fill .020". Silver in color.

Part number Size Pkg Qty *Formerly Prolock Press Fit Repair (81962) LT-66010 .......................6 ml. ................................10 **50 & 250ml bottles also available on request

.

Quick Metal® Press Fit Repair Retaining Compound

Formulated specifically for metal, tapered pipe thread fittings. High performance pipe sealant withstands pressures up to 5000 psi. This anaerobic product cures rapidly to provide instant low pressure sealing. Easy applicator dispenses paste in a wide, uniform band for less waste. Seals to 10,000 psi operating pressure in 4 hours. Temp range: -65°F to 450° F.

Part number Size Pkg Qty LT-56531 ......................50 ml.................................10 *Formerly Seals Pipes (81800)

Thread Sealant w/Teflon®

Economical, nonhardening pipe thread sealant. Will not shred like teflon tape. Seals to 5,000 psi. Temperature range: -65°F to 400° F. Color: black paste.

Part number Size Pkg QtyLT-30556 .................1/4 pt (4 oz.) ..........................12LT-30557 ................. 1 pt (16 oz.) ..........................12

Thread Sealant 565 PST® Controlled Strength

Pipe Joint Compound

(Anaerobic Activator) Speeds setup time of threadlockers and retaining compounds. Increases breakaway torque on fastener surfaces. Allows cold weather application of anaerobics.

Part number Size Pkg QtyLT-21348 ...............4.5 oz. Aerosol.........................10

QuickStix 561 PST Thread Sealant 561 is used to seal pipes and fittings. Cures rapidly to provide an immediate low pressure seal. Its controlled lubricity prevents galling and protects mated threaded areas from rust and corrosion. Lab tested for immediate low pressure sealing for up to 100 psi. Ful cure time: 4 hours. Pressure resistance fully cured: 10,000 psi. Color: White Part number Size Pkg QtyLT-37127 .................1/4 pt (4 oz.) ................. 1 CASE *Sold by the case (10 per case)

Locquic 7649 Primer n


WITH COLOR INDICATOR Brightly colored orange powder changes to a highly visible lime-green color to indicate where it has been applied to wet floor. The darker the solution color, the stronger the cleaner concentration. Citra Crystals utilizes detergents and d'Limonene extracts, a potent natural solvent that penetrates grease and grime. Can be diluted with water for sponge mopping floors, walls and power washing too. Fresh orange scent. Biodegradable. USDA category C-1.

Part number Size Pkg Qty16-665 .................... 50 lb. Drum .............................1

CleanersLiquid Steam Cleaning Concentrate

Part number Size PkgQty16-378PT ................1 pint can...............................1216-378GL ................1 gal. Bottle .............................4

Heavy duty cleaner/degreaser form-ulated for use with high temperature steam cleaners and pressure washers. Highly concentrated. Quickly removes grime, oil and grease from metal, concrete and painted surfaces. Special inhibitors protect your steam cleaners' heating coils from scaling and corrosion. Designed to remove heavy grime at a 1:20 dilution ratio. Lighter cleaning chores mix up to 1:40. USDA category A1.

Part number Size Pkg Qty16-405GL ................ 1 gal. Bottle ...........................4

Multipurpose Cleaner & degreaserEnvironmentally friendly nonbutyl concentrated detergent cleaner. Cleans and degreases without harsh solvents, butyls or alcohols. Money saving concentrate replaces ready-to-use cleaners and presoaks. May be used in automatic scrubbers, pressure washers, hot tanks and spray cleaners. Use on painted surfaces, walls, floors, appliances counter-tops, tile, grout, grills, bathrooms and more. Does not irritate skin. Dilute with water as required. Degreaser 1:1, medium duty 10:1, light duty 30:1, glass and mirrors 150:1. USDA category A1.

Part number Size Pkg Qty16-411GL .........1 gal. (128 oz.) bottle......................4

Orange degreaser

This natural formula is free of petroleum distillates and contains orange peel extracts. Great for cleaning equipment, motors, metal parts, concrete and wood floors, garbage cans, adhesives and carpet bacnking from subfloors. Works well in parts washers and pressure washers, Dilute with water or apply full strength, then flush surface with a power sprayer. USDA category C1.

Pure eZ degreaser

A safe alternative to hazardous petroleum-based degreasers or harsh alkaline clean-ers. Combines a variety of natural and biodegradable detergents and emulsifiers made from oranges and soybeans — in perfect balance to produce a “green” cleaner that dissolves the heaviest grease deposits. As versatile as it is safe. Use it to remove gum, wax, oil, tar, dirt, adhesives as well as grease and grime. It even cleans concrete and mason-ry, machinery and equipment, motors and other metal parts. Utilizes an emulsifiable formula that penetrates deposits fast, allowing you to rinse the dirt and residue away with water.

Part number Size Pkg QtyA-070255090 .................1 pint ........................... 1A-0702 .............1 gal. (128 oz.) bottle......................4

Citra Crystals Powdered Concrete Floor Cleaner


Concentrated Truck Wash

Cleaners

One-step cleaning and waxing saves time. Restore highest lustre to finish on cars and trucks as well. Leaves your vehicle spotless and film-free with a glossy wax finish. Biodegradable. Concentrated formula must be mixed with water.

Part number Size Pkg Qty16-120GL ................ 1 gal. Bottle .............................416-120PL ..................5 gal. Pail...............................1

Concentrated Car Wash & Wax

Formulated for volume washing of truck fleets, construction equipment, farm implements and more. Cuts through dirt, diesel fuel, road film and grime. Safe to use on aluminum surfaces. Ultra concentrated liquid allows 1:2 mix with water, then set the dilution ratio to 1:25 on your pressure washer.Part number Size Pkg Qty16-118PL ..................5 gal. Pail...............................4

This foaming action glass cleaner is formulated with ammonia. Cleans fast without streaks. Thoroughly cleans dirt and grime while leaving a pleasant fragrance. Use to wipe away fingerprints, smudges, dust, dirt, oil, grease, bugs and road spatter. Use on glass doors, windows, showcases, windshields and headlights.(Formerly 16-0075B)Part number Size Pkg QtySW-043 ................. 19 oz. Aerosol .........................12

The World's Best Glass Cleaner. Excellent for windows, mirrors, windshields and other glass surfaces. Dissolves dirt, grease, grit, and grime. Heavy-duty foam clings to vertical surfaces. Guaranteed to leave no film. Contains perfume-grade alcohol for best performance. Ammonia-free. Clean fresh fragrance(Formerly 16-0101B)Part number Size Pkg QtySW-050 ................. 19 oz. Aerosol .........................12

Streak-Free Glass & Mirror Cleaner

Glass Cleaner non-Ammoniated

Glass Plus Multi-Purpose Glass Cleaner, Translucent Blue, Liquid, Scent: Floral Glass Plus is a non-ammoniated glass cleaner that cleans glass, appliances, fixtures, plus a whole lot more without streaking. Just spray and wipe.

Part number Size Pkg QtyAPJ-DRC-94378 .......... 32 oz ................................12

Glass Plus Multi-Purpose Glass Cleaner


Cleaners

Cleans, deodorizes and degreases parts, work areas, walls, and floors. Removes dirty hand prints, scuff marks, bathtub rings, soot, grease, smoke film, oil, dust, lipstick, crayon marks, etc. Easily wipes down washable painted surfaces, window sills, venetian blinds, porcelain, and tile. Ecologically safe; formulated with orange citrus solvents. Contains no chlorinated solvents (Formerly 16-0104B)

Part number Size Pkg QtySW-985 ........................20 oz.................................12

Heavy duty, non-chlorinated degreaser. Effective for removal of grease, oil, ink, adhesive, tar, wax, exhaust fume residue, resins and certain graffiti. Use to replace products containing acetone, trichloroethylne, butyl cellosolve and other chlorinated solvents (Formerly 16-0130B)


Orange Citrus Crazy Cleaner

Orange Power Plus

This powerful cleaning solvent removes grease, oil, dirt, tar, gasket adhesives, crayon, ink and fresh paint. Can be used to clean electric motors of all types while equipment is in operation. Quiets down noisy electric power tools. Use on metal parts, ignition systems, power and hand tools, housings and covers, fuse boxes, meters, typewriters, generators, small engines, motorcycle engines, etc. Safe to use on most plastics†. Non-hazardous to atmosphere. Includes snorkel. (Formerly 16-0074B)


Blast-Off Safety Solvent - nOnFLAMMABLe

Organic, biodegradable gel clings to vertical surfaces to emulsify dirt, oil, grease, tar, asphalt and creosote. Spray it on, let sit for 10 to 20 minutes and hose it off. Contains no chlorinated solvents, acids, alkalies or petroleum distillates. Part number Size Pkg Qty16-0042B .............. 13 oz. Aerosol .........................12

Gelled engine degreaser


Low cost nonchlorinated formula contains fast-acting solvents that dry fast and residue free. Dis-solves and flushes away grease, dirt and fluids from pads, calipers, drums, cylinders, springs and other metal parts. Nonhazardous to atmosphere. Includes snorkel.

Part number Size Pkg Qty Warning: Extremely flammable. MS-BCN-20CA ........... 15 oz. ..............................12 Adequate ventilation required.

A nonflammable industrial cleaning solvent for use on metal and rubber parts, brake parts and pads. Dries fast and residue-free. Dissolves grease, oil, fluids and contaminants. Non-flammable. Non-hazardous to atmosphere.

Part number Size Pkg Qty16-310GL .............. 128 oz. (1 gal) ...........................4 *Available in pails and drums.

Efficient nonflammable formula contains fast-acting solvents that dry fast and residue free. Dissolves and flushes away grease, dirt and fluids from pads, calipers, drums, cylinders, springs and other metal parts. Includes snorkel.

Part number Size Pkg QtyMS-BC-20 ................... 18 oz. ..............................12

CleanersMaster® nonChlorinated Brake Cleaner

Master® nonflammable Brake Cleaner

MPI Bulk Safety Solvent

A high dielectric, high purity, rapidly evaporating, non-flammable aerosol spray contact and circuit board cleaner. Specially formulated for removing oil, grease, condensation, dust, and other particulate matter from sensitive electronic parts. Quick drying formula will not harm most plastics, paints, or rubber. Includes extension tubes for easier application to remote areas. Includes snorkel.Contains materials with 85% less ozone depleting potential than traditional contact cleaners.

Part number Size Pkg Qty16-0107B ........ Net wt. 14 oz. Aerosol ...................12

Cleans carburetors, chokes and fuel injectors with a very powerful blasting spray. Improves engine acceleration and performance. Instantly dissolves carbon, gum and varnish deposits to bare metal in seconds. Frees up frozen chokes, manifold heat controls, pcv valves and heater valve shafts. Non-chlorinated. Non-hazardous to atmosphere. Includes snorkel. (Formerly 16-0020B)

Part number Size Pkg QtySW-563 ..........Net wt. 15.5 oz. Aerosol .................12

Blasting spray cleans oil, grease, dirt and flux from contacts, printed circuit boards, precision instruments, switches and more. Dries fast and residue free. Safe to use on plastics, rubber and metal. Non-hazardous to atmosphere. Nonconductive to 25,000 volts. Includes snorkel. (Formerly 16-0110B)

Part number Size Pkg QtySW-789 ................. Net wt. 11 oz ....................... 12

WARNING: EXTREMELY FLAMMABLE. This product should not be used on energized equipment.

Contact & Circuit Board Cleaner II - nOnFLAMMABLe

Choke & Carb Cleaner

Contact & Circuit Board Cleaner III


Cleaners

Clings to vertical surfaces. Powerful gel formula dissolves graffiti, spray paints, scuff marks, road tar, inks, crayon and more from road signs, bus seats, rest-room walls and playgrounds. (Formerly 16-0069b)Part number Size QtySW-880 ........................ 12 oz ................................12

Our most powerful citrus lotion hand cleaner works with or without water. D'limonene based formula removes dirty grime and leaves hands clean and odor free. Gentle to the skin. Fortified with lanolin and emollients to protect hands from chapping. USDA cat E4. Part number Size Pkg Qty One Plastic Pump is included CiTRA CLEAN LOTiON, wiTH pUMiCE with purchase of every 4 16-440GL ......... 1 gal. Flat-Top Bottle ......................4 gallons.NATURALLY CLEAN LOTiON, SMOOTH16-443PT ........ 1 pt. Spout-Top Bottle ...................12 Flat top gallons accept 30-102P Universal Dispenser16-443GL ......... 1 gal. Flat-Top Bottle ......................4

Citrus-Based Waterless Hand Cleaners

This powerful hand cleaner quickly emulsifies and removes deeply embedded dirt, grease, oil, tar, putty, cement, glue, asphalt and the most stubborn soils. Cleans with or without water. Fortified with lanolin.

Part number Size Pkg QtyGO-JOTM ORiGiNAL CREMEGJ-1115 ............. 4.5 lb. Plastic Can ........................6GO-JOTM CREME wiTH pUMiCEGJ-1135 ............. 4.5 lb. Plastic Can ........................6GO-JOTM LEMON CREMEGJ-0905 ............. 4.5 lb. Plastic Can ........................6

Vandalism Mark Remover

Waterless Hand Cleaners

Part number Size Pkg QtyLT-01013 ............ 14 oz. Plastic Can ......................12 *30-102P Universal Dispenser required.LT-01406 ....... 4.5 lb. Plastic Cannister* ..................6

Smooth cream formula that’s tough on dirt but gentle on hands. Contains aloe and lanolin. Fresh scent. Fits standard 4.5 lb. can dispensers. U.S.D.A. approved.

Blue LabelTM Waterless Cream Hand Cleaner

A fine pumice lotion formulated to remove paint, polyurethane, stain, varnish, adhesives, plastic pipe cements and other tough soils. Parr® is a safer alternative to harsh thinners and solvents. Ideal for painters, plumbers, and manufacturing finishing operations. Contains skin conditioners: aloe, lanolin, jojoba, and vitamin E. Fresh scent. Non-toxic. Biodegradable. Part number Size Pkg QtyLT-65116 .................14 oz. Bottle ............................6LT-65216 .......1/2 gal. Bottle with Pump...................1

Paint & Resin Removing Hand CleanerTHe SAFe ALTeRnATIVe TO HARSH SOLVenTS

PLASTIC PUMP One gallon bottles.Part no. 30-221

Hand Cleaner dispensersWIRE WALL BRACKETHolds 1 gallon bottle. Part no.30-222

UNIVERSAL DISPENSERWall mountable. Part no. 30-102P

Fits all 2000ml Softbottles.Part no. ColorSH-89806 ..........WhiteSH-89808 ..........Black


CUPRAn® Heavy duty Paint & Resin Removing Hand Cleaner

eSTeSOL® Light duty Hand Cleanser

Kresto® EF is an extra heavy duty, low solvent hand cleaner that cuts industrial dirt, grease, oil, soot, ink, sewer sludge, carbon black, lacquers, adhesives and more. Deep cleaning ASTOPON® natural, biodegradable walnut shell scrubbers will not clog pipes! Non-toxic, low solvent formula. Contains EUCORNOL® for conditioning. Made in U.S.A.

Part number Size Pkg QtySH-87005 ........ 250ml Tube (7.5 oz.) ....................24SH-87045 ....2000ml Softbottle® (60oz.) ..................6

Estesol® is a soap-free liquid skin cleanser for light dirt, with strong washing power and very good skin compatibility. Use for everyday hand cleaning. Pleasant to use and economical. Made in U.S.A.

Part number Size Pkg QtySH-83311 .....2000ml Softbottle® (60oz.) ..................6

Cupran® Special is a powerful hand cleaner for oil-based paints, stains, urethane, sealants, adhe-sives, tar and asphalt. ASTOPON® natural, biodegradable walnut shell scrubbers will not clog pipes! Perfect for Body Shops! Made in U.S.A. Part number Size Pkg QtySH-81871 ........ 250ml Tube (7.5 oz.) ....................12SH-81874 ....2000ml Softbottle® (60oz.) ..................6

CleanersKReSTO® eF extra Heavy duty Hand Cleaner

The petroleum-free hand cleaner cuts through the toughest grease and grime with natural citrus oil. Contains aloe, lanolin, and jojoba conditioners. Leaves hands with the fresh scent of oranges! U.S.D.A. approved.

Part number Size Pkg QtyFAST ORANGE® LOTiON wiTH pUMiCELT-25218 ..........1 gal. Bottle w/ Pump .....................4LT-25104 .......... 1 gal. Flat-top Bottle ......................4

FAST ORANGE® LOTiON, SMOOTH (wATERLESS)LT-23218 ..........1 gal. Bottle w/ Pump .....................4LT-23104 ...........1 gal. Flat-top Bottle ......................4

FAST ORANGE® CREAM wiTH pUMiCELT-35406 ....... 4.5 lb. Plastic Cannister ...................6

FAST ORANGE® CREAM, SMOOTH (wATERLESS)LT-33406 ....... 4.5 lb. Plastic Cannister* ...................6

nATURAL CITRUS HAnd CLeAneR

PLASTIC PUMP One gallon bottles.Part no. 30-221

Hand Cleaner dispensersWIRE WALL BRACKETHolds 1 gallon bottle. Part no.30-222

UNIVERSAL DISPENSERWall mountable. Part no. 30-102P

Fits all 2000ml Softbottles.Part no. ColorSH-89806 ..........WhiteSH-89808 ..........Black


Cleaners

KReSTO® KWIK WIPeS® Waterless Hand Cleaning TowelsKwik-Wipes® are textured for quick, waterless cleaning of dirt, grease and grime from hands. Per-fect for when a sink is not available, at individual workstations, or for maintenance fleets. Large 10” x 12” polypropylene towel size. Made in U.S.A.

Part number Size Pkg QtySH-87077 ................. 70-Count ...............................6

Multi-Purpose Hand Cleaning Towels

PRe-MOISTened HAnd CLeAnInG TOWeLSRemoves tar, grease, wax, ink, paint, lubricants, glue, rubber gasket and tile cements from hands and nonporous surfaces in your shop. To aid in cleaning, the towels are made from an abrasive yet non-scratching fabric that helps lift away heavy deposits of grime and dirt.Part number ................ Size ....................... Pkg QtyLT-34943 ................ 75 count cannister ....................6LT-34944 ................ 130 count cannister ..................4

IndUSTRIAL STRenGTH CLeAneR WIPeS

Quickly dissolves away unwanted paint, ink and permanent marker. Environmentally safe. Biodegradable formula. Non-toxic, non-flammable, non-hazardous and odorless. Specially designed towels are made from an abrasive, yet non-scratching fabric that aids in cleaning. Quick and easy to use, just wipe and discard. (Formerly 16-0056B)

Part number Size Pkg QtySW-963 ..................... 40 Wipes ...............................6

Food-grade mineral oil sprays as a light cream that cleans, polishes and restores luster to all metal surfaces. Not for tarnish removal. For use on restaurant fixtures, refrigerators, freezers, stoves, grills, slicing equipment, ovens, preparation tables, elevators, washroom receptacles, water fountains and more. Clings to vertical surfaces. Removes tough oil based stains, water marks, spots and stains of food origin. Leaves a protective coating that resists water-spotting, soiling and fingerprints. Leaves no greasy film. Use on wet or dry surfaces. USDA authorized. (Formerly 16-0051B)


Steel Shine Metal Cleaner & Polish

Cleans, polishes and protects metal in one easy application. Removes tarnish and prevents oxidation. Also works on chrome, gold, platinum, fiberglass and plexiglass. Met-All brand.

Part number Size Pkg Qty16-0118 ...................2.5 oz. Tube...........................1216-0119 ..................... 1 lb. Can ...............................6

Aluminum and Stainless Polish

Foam action cleaner penetrates and emulsifies dirt, grease, acid and contaminants. Neutralizes acid residues increasing the pH to a safe level. Spray liberally on battery, terminals, metal connectors, brackets and nearby areas.

Part number Size Pkg QtyMS-BTC-8 .............. 6 oz. Aerosol ..........................12

Master® Battery Terminal Cleaner


IndUSTRIAL STRenGTH CLeAneR WIPeS

Steel Shine Metal Cleaner & Polish Clean Sweep Sanded Grit Oil Based Sweeping CompoundIdeal for unfinished wood and concrete floors, warehouse and factory floors. Manufactured with sawdust, certified oils, and fine grade sand. Our sanded grit oil base sweeping compound is effective for collecting and keeping the dust and dirt down while sweeping in work areas. We add pine oil deodorizers that leaves your floor fresh and clean. Part number Size Pkg Qty *Wax based is available on request.31-706 ......................50 lb. Box ..............................1

Safety Absorbent® is a premium calcined clay all- purpose absorbent designed for the quick clean up of water, oil, and grease and made from Montmorillonite Clay, a naturally occurring mineral with superior absorptive ability. Safety Absorbent® comes in a leakresistant and moisture-resistant poly bag.

Part number Size Pkg Qty31-708 ......................40 lb. Bag ..............................1

CleanersEffectively clean toilet bowls, urinals, tubs, shower stalls, sinks and faucets. Cuts through heavy rust deposits, soap scum, heavy calcium deposits and hard water stains. Applications: Nonporous surfaces such as fiberglass, chrome, stainless steel, vitreous, glass, plastic, aluminum, glazed porcelain, tile, grout, ceramic and terrazzo surfaces. Product must remain on surface for 10 minutes or more. Warning: Phosphoric acid based formula. Wear goggles and rubber gloves when using this product. Do not use on marble surfaces.

Part number Size Pkg Qty31-723 ........................ 1 quart ..............................12

Stay Bathroom Cleaner/disinfectant

Clorox® Disinfecting Wipes are the simple solution for cleaning and disinfecting a variety of household surfaces. There’s no need for multiple products when you have the convenience of one simple-to-use wipe. Just wipe, toss, and you’re done.

Part number Size Pkg QtyAPJ-CBC-01633 ........30 wipes .............................12

Multi-surface disinfecting Wipes

Safety Absorbent

Master® Battery ProtectorAcid fumes from batteries cause corrosion on nearby metal parts. This corrosion not only shortens the life of these components but can lead to premature battery failure by increasing battery drain. Battery Protector seals battery terminals with a long lasting protective film to eliminate corrosion and extend battery life.

Part number Size Pkg QtyMS-BP-8 ................ 6 oz. Aerosol ..........................12

Spray disinfectant & deodorizerSpray Disinfectant & Deodorizer (Quat, HIV-1) - (12/cs) Kills HIV-1 (AIDS virus) on precleaned environmental surfaces/objects. Kills most germs. Eliminates odor. Prevents mold and mildew. Quaternary formula.

Part number Size Pkg QtyAPJ-CH5157...............15.5 oz...............................12


Coatings

Non-cracking corrosion stopper that neutralizes battery acid and seals electrical connections against corrosion. Brush QuickCote+ on electrical contacts and all areas affected by corrosion.Brush-top Can.

Part number Size Pkg QtyQC-6023-001 ......................... 8 oz. ........................6

Protective washers made of nonwoven material, impregnated with anti-corrosive inhibitors. Prevents power robbing corrosion build-up on top post and threaded stud battery terminals. 100 per metal can.

Part number Color Pkg QtyQC-6622-100B ............ Black ........................... 1 canQC-6622-100R ............. Red ............................ 1 can

Battery Terminal Protective Washers

Quick-Cote+ Battery Terminal Corrosion Stopper

Non-toxic and nonflammable formula provides a safe welding environment with no harmful fumes. Prevents welding spatter from adhering to mig nozzles, contact tips and related accessories, as well the weld area of metals to be joined. Residual spatter may be brushed or wiped away before painting. Contains no chlorinated solvents or silicone. (Formerly 16-0070B)


Anti-Spatter and nozzle Shield

Flexible, semi-hard, dirt resistant, long-term, anti-rust and anti-corrosion film. Protects metals from exposure to weather, high humidity, chemical fumes, and salt spray. Excellent for protecting parts in transit or storage. Identification coding can be easily seen through translucent-amber coating. Can be easily removed when necessary. For use on oil rigs, metal molds, and in industrial plants.Temperature range: -40°F to 175°F. Easily removed with solvent.

Part number Size Pkg Qty Warning: Extremely flammable.16-0050B .............. 14 oz. Aerosol .........................12

Metal Parts Protector

Belt dressing & ConditionerExtends belt life. Penetrates the cord fibers of "V" belts to restore pliability and flexibility. Quickly stops belt slippage due to heat, cold, dampness and dust. Eliminates squeaking and glazing.

Part number Size Pkg Qty Warning: Not for use on serpentine belts.LT-30527 ............... 12 oz. Aerosol .........................12

Spray on metal surfaces to prevent corrosion even when surface is scratched. Ideal touch-up for welded seams. Highly resistant to salt corrosion and water. Resists abrasion and large temperature fluctuations. Uses: trailers, road equipment, farm equipment, ducts, culverts, tanks, pipelines, structural steel, marine equipment and docks, ornamental iron, fences, air conditioners and playground equipment. Contains no ozone depleting compounds. Temperature resistance: Up to 400°F continuous; 600°F intermittent. Color: low gloss grey. Dry time: 15 minutes to touch. Not resistant to acids or alkaline solutions. Meets ASTM, MIL and USDA requirements.

Part number Size Pkg QtyLT-82039 ............... 15 oz. Aerosol .........................12

Cold Galvanizing Compound


Coatings

Red Insulating Varnish is an insulating spray for general coating, impregnating and insulating electrical and electronic work. Excellent adhesion to metals, windings, coils. Air dries faster than most insulating materials. Protects surface against oils, moisture, acid and alkalis. Perfect for small field and magnet coils; penetrates oil and new windings; has excellent flexibility and water resistance.

Part number Size Pkg Qty Warning: Harmful vapors Extremely 31-022 .................. 15 oz. Aerosol .........................12 flammable.

Rust and corrosion inhibitor provides protection against dust, heat, rust, fumes and debris. Durable rubberized shield soundproofs and waterproofs. Remains flexible and won’t crack. Ideal for new panel and fender replacements, fender wells or replace chipped undercoating. Color: brown to black film.

Part number Size Pkg Qty Warning: Extremely flammable. Do not LT-30538 ............... 16 oz. Aerosol ........................12 use in automotive interiors and trunks.

Rubberized Undercoating

Red Insulating Varnish

The most advanced high solids, VOC Compliant coating in the industry, 3-4 times the coverage of standard aerosol spray paint. A superior, lead-free industrial coating formulated for maintenance operations where maximum performance is required. This high solids paint does not run or sag, and provides coverage of 3 to 4 times conventional aerosol enamels. Protects against rust, weather, oil, gasoline and most corrosive chemicals. MRO High Solids resists abrasion and heat, withstands high humidity, has single coat hiding and is USDA authorized. Heat resistant up to 300°F.

MRO High Solids Spray Paint

Part number Color Pkg QtySM-620-1411• ...........Aluminum ..............................6SM-620-1433• ....Flat Black ....................................6SM-620-1415• ....Gloss Black .................................6SM-620-1417• ....Dark Machinery Gray .................6SM-620-1447 ......Cummins Beige ...........................6SM-620-1448 ......Cascade Green ...........................6SM-620-1450 ......Omaha Orange ...........................6SM-620-1413• ....Gloss White .................................6SM-620-1443• ....New Cat Yellow ...........................6

Part number Color Pkg QtySM-620-1446 ......... Ryder Yellow ...........................6SM-620-1427• ....Safety Blue ..................................6SM-620-1452• ....Safety Green ...............................6SM-620-1451• ....Safety Orange .............................6SM-620-1423• ....Safety Red ..................................6SM-620-1419• ....Safety Yellow ...............................6SM-620-1431• ....Light Gray Primer ........................6SM-620-1407• ....Red Iron Oxide Primer ................6•Available in one gallon cans.

Part number Color Pkg QtySM-98-1 ...... Metallic Chrome Aluminum Lacquer ..12SM-98-32 .... Metallic Dull Aluminum Lacquer ......12SM-98-10 ..... Flat Black Enamel ............................12SM-98-3 ...... Gloss Black Enamel .......................12SM-98-24 ..... Semi-Gloss Black Enamel .............12SM-98-35 ..... Gloss Dark Blue Enamel ................12SM-98-37 ..... Gloss Light Blue Enamel ................12SM-98-36 .... Gloss Brown Enamel .....................12SM-98-11 .... Gloss Clear Enamel .......................12SM-98-31 .... Gloss Clear Lacquer ........................12SM-98-14 .... Metallic Copper Lacquer ..................12SM-98-7 ...... Gloss Dark Machinery Gray Enamel 12

Spruce 473TM Spray PaintA full line of low cost, quality primers and finishes that meet your painting needs. This tough, durable paint is perfect for most wood and metal surfaces both indoors and outdoors. Spruce paints are safe to use and do not contain lead, CFC's or chlorinated solvents. Unique concave mixer disc mixes paint even in the bottom rim of the can where common ball mixers can't reach. Extra fine filter eliminates clogging. Full- length tube gets all the product out of the can, and this gives more coverage. Formulated for use at a distance of 8 to 10 inches from the surface, reducing wasted paint, over-spraying and sag. SAG-RESISTANT FORMULA resists sagging, even at cooler temperatures. Non-hazardous to atmosphere. Metallic Finish.

Part number Color Pkg QtySM-98-17 .... Metallic Gun Metal Gray Lacquer ....12SM-98-88 .... Gloss Bright Green Enamel ...........12SM-98-8 ...... Gloss Dark Green Enamel .............12SM-98-5 ...... Metallic Gold Lacquer .....................12SM-98-28 .... Gloss Orange Enamel ....................12SM-98-4 ...... Gloss Red Enamel .........................12SM-98-12 ..... Flat White Enamel ...........................12SM-98-2 ...... Gloss White Enamel ......................12SM-98-86 .... Gloss Dark Yellow Enamel .............12SM-98-34 .... Gloss Light Yellow Enamel .............12SM-98-15 ..... Light Gray Primer ............................12SM-98-26 ..... Red Iron Oxide Primer .....................12


Coatings

Formulated with the heavy duty owner/operator in mind. High solids aerosol ensures single-coat hiding power. Resists fading, chipping, peeling, cracking and corrosion. Each can contains 30% more paint than typical "off-the-shelf" brands. Use on wheels, fuel tanks, bumpers, mirrors and trim.

Part number Color Pkg QtySM-20-1611 ........Aluminum, 20 oz. .......................6SM-20-1648 ........Cast Iron, 20 oz. .........................6SM-20-1647 ........Cummins Beige, 20 oz. ..............6SM-20-1615 ........Frame Black, 20 oz. ...................6SM-20-1623 ........Fleet Red, 20 oz. ........................6

BIG RIG Fleet Spray Paint

Part number Color Pkg QtySM-16-266 ..........John Deere Yellow, 16 oz. ...........6SM-20-1686 ........School Bus Yellow, 20 oz. ..........6SM-20-1660 ........Stainless Steel, 20 oz. ................6SM-20-1613 ........Fleet White, 20 oz. .....................6

Heavy duty water-based industrial marking and striping paints are environmentally formulated. InVeRTed TIP MARKeR is a heavy duty water-based up-side- down paint available in a full range of coded construction and public works colors. Comes with protective cap that prevents accidental spraying.

TRAFFIC MARKeR is a water based up-side-down paint formulated with high pigment solids suitable for concrete, blacktop, gravel and dirt. Not affected by water.

GOLF COURSe MARKeR is a water-based up-side- down paint formulated not to harm grass. This marker is not water soluble and will not wash away during rain or irrigation. Comes with protective cap that prevents accidental spraying.

InVeRTed TIPPart number Color Pkg QtySM-20-652 ......... White, 20 oz. .............................12SM-20-663 ......... Asphalt Black, 20 oz. ................12SM-20-653 ......... Precaution Blue, 20 oz. .............12SM-20-655 ......... Safety Green, 20 oz. .................12SM-20-670 ......... Alert Orange, 20 oz. ..................12SM-20-671 ......... Safety Red, 20 oz. ....................12SM-16-676 ......... High Visibility Yellow, 16 oz. .....12SM-16-677 ......... Caution Yellow, 16 oz. ...............12SM-20-654 ........ Fluorescent Red, 20 oz. ............12SM-20-657 ......... Fluorescent Orange, 20 oz. ......12SM-20-668 ......... Fluorescent Green, 20 oz. ........12SM-20-669 ......... Fluorescent Blue, 20 oz. ...........12

Inverted Marker Paints

TRAFFIC MARKeRPart number Color Pkg QtySM-20-642† ....... Traffic White, 20 oz. ..................12SM-20-646† ..... Traffic Yellow, 20 oz. .................12SM-20-648 ......... Light Handicap Blue, 20 oz. .......12SM-20-649 ......... Dark Handicap Blue, 20 oz. .......12

GOLF COURSe MARKeRPart number Color Pkg QtySM-16-692 ......... White, 16 oz ...............................12SM-16-694 ......... Red, 16 oz. ................................12

† Also available in solvent base (no broken packages).Color chart available on request.

For use with Stripe® Inverted Marking Paints and most all other brand marking paints. Reduces back strain and maintains consistent marking height. Used by highway crews, utilities, landscapers, athletic departments, golf courses, surveyors and municipalities.

Part number Pkg Qty 10-726 .....................................................................1

Paint Marking Wand


Valve action releases paint as needed. Felt tip makes long-lasting, bold marks on all surfaces -- metal, glass, wood, rubber, paper, cardboard, styrofoam, and fiberglass. Compact size fits in shirt pocket. Durable metal barrel. Lead-free, fade resistant paint. Complete assortment of colors in stock. Temperature range: -50°F to 150°F. Dries in 3 minutes.

Part number Color Pkg Qty10-727 ........................White .................................1210-728 ........................Yellow ................................1210-737 ........................Red ...................................1210-738 ........................Black .................................1210-739 ........................Orange ..............................12

Durable 1/8" metal ball tip lasts and lasts. Marks both smooth and rough surfaces. Ideal for any hard surface -- metal, glass, wood, plastic, fiberglass, billets, raw steel or semi-finished steel. Marks with fine lines on smooth surfaces, rough surfaces (cast metals) and even wet surfaces. Lead-free, fade resistant paint. Temperature range: -50°F to 150°F. Dries in 5 minutes.

Part number Color Pkg Qty10-729 .........................Yellow ...............................12

Great for hard to tape areas. Stays flexible and will not crack or unravel like vinyl tapes. Forms a coating that seals out moisture and corrosion for strong, trouble-free electrical connections. Insulates, waterproofs and protects terminals of all types. Absorbs vibrations, prevents terminal screws from vibrating loose. Color: Black.

Part no. Size Pkg Extremely flammable.30-1002 ........................ 4 oz .................................12

Valve-Action Paint Markers

Part number Color Pkg Qty10-740 ........................Dark Blue ..........................1210-741 ........................Green ................................1210-743 ........................Aluminum ..........................1210-744 ........................Light Blue ..........................12

Ball Tip Paint Marker

Brush-On electrical Tape

Loctite® Hi-Tack Gasket Sealant. Red-colored, liquid sealant that holds gaskets in place during assembly. Seals and bonds rubber, cork, paper, felt, metal, and asbestos gaskets. Sets quickly to a very tacky film. Suitable to 500°F (260°C). Contains no ozone-depleting compounds.

Part number Size Pkg QtyLT-30525 .............. 1 pt. Brush-Top ........................12LT-30526 ................ 9 oz. Aerosol ..........................12

Hi-Tack Gasket Sealant

Coatings


518 Gasket Eliminator is a single component, medium strength, thixotropic, anaerobic sealant; it cures rapidly when confined in the absence of air between close fitting metal surfaces. 50 mL tube.

Part number Size Pkg QtyLT-51831 ................. 50 ml. Tube ...........................10

Sealants & Gasketmakers

Gasket Sealant no. 2 Reliable, paste-like gasket sealant, dressing and

Flange Sealant 518 Gasket eliminator®

coating. Sets slowly to a pliable film best suited for non-rigid, vibrating assemblies. Resistant to gasoline and other solvents. Remains tacky. Cures time: 12 hours. Temperature range: -65°F to 400°F. Withstands pressures to 5000 psi. USDA approved. Tested to MIL-S-45180D Type III. Color: black paste.

Part number Size Pkg Qty (Replaces Permatex Form-A-Gasket #2)LT-30515 .............11 oz. Shop Tube ......................12

Thin, brushable dressing or sealer for close fitting parts. Slow drying, flexible setting. Resistant to gasoline and other solvents. Withstands pressures to 5000 psi. U.S.D.A. approved. Tested to MIL-S-45180D. Temperature range: -65°F to 400°F. Color: Black

Part number Size Pkg QtyLT-30516 .............. 1 pt. Brush-Top ........................12

Aviation Gasket Sealant

QuickStix 548 Gasket eliminator Flange Sealant Loctite® QuickStix™ 548™ Gasket Eliminator® is a patented

semi-solid formula is ideal for on-the-spot repairs, or when a conventional gasket is out of stock. Can be applied quickly and neatly on a variety of metal surfaces, including aluminum, to form a flexible, solvent resistant seal. Seals to 300°F (149°C) and fills gaps to 0.010".

Part number Size Pkg Qty LT-39152 ..................18 gm stick .................. 1 CASE *Sold by the case (10 per case)

QuickStix 534 Hi-Tack Gasket dressing Loctite® QuickStix™ 534™ Hi-Tack Gasket

Dressing. No mess, semi-solid formula offers added control and ease of use. Patented package is portable and won’t leak or spill. Seals and holds the heaviest gaskets in place during assembly. Solvent-free and low odor. Suitable to 300°F (149°C).


QuickStix 668 Retaining CompoundLoctite® QuickStix™ 668™ High Temperature

Retaining Compound is a high temperature retaining compound in a revolutionary semi-solid formula. Patented, no-mess package offers added convenience and portability. Ideal for gaps up to 0.005" on the diameter. Withstands temperatures to 400ºF (204ºC)



RTV Sealants & GasketmakersCures to a tough, flexible rubber. Makes any size or shape "formed-in-place" gaskets that resist shrinking, cracking or migrating. Low volatility. Tack free: 30 min. Full cure: 24 hours. Temperature range: -65°F to 500°F.

Part number Size Pkg QtyLT-30560 .................. 80ml Tube ............................12LT-30518 ..............12oz Shop Tube .......................12LT-30533 ..............300ml Cartridge ........................10LT-40482 ....... 190 ml Pressurized Can ...................6

SuperflexTM Blue RTV Silicone Adhesive Sealant

Makes gaskets that resist temperatures to 600°F intermittent. Resists aging, weather and thermal cycling without shrinking, cracking or hardening. Tack free: 30 min. Full cure: 24 hours. Temperature range: -75°F to 600°F.

Part number Size Pkg QtyLT-59630 .................. 80ml Tube ............................12LT-82279 ..............12oz Shop Tube .......................12LT-59675 ..............300ml Cartridge ........................10LT-40465 ....... 190 ml Pressurized Can ...................6

SuperflexTM Red High Temp RTV Silicone Adhesive Sealant

Excellent adhesion to oily and oil contaminated surfaces. Noncorrosive. Will not harm aluminum. Oxygen sensor safe. Low volatility. Fills gaps to .25". Tack free: 30 min. Full cure: 24 hours. Temperature range: -75°F to 500°F.

Part number Size Pkg QtyLT-58730 .................. 70ml Tube ............................12LT-58775 ..............300ml Cartridge ........................12

Ultra Blue® RTV Silicone Gasket Maker

Premium silicone gasket maker is superior oil resistance. Resistant to most chemicals and solvents. Low odor, low volatility noncorrosive and nonconductive. Fills gaps to .25". Tack free: 30 min. Full cure: 24 hours. Temperature range: -75°F to 700°F.

Part number Size Pkg QtyLT-30542 .................. 70ml Tube ............................12

Ultra Copper® High Temp RTV Silicone Gasket Maker

General purpose sealant for caulking, bonding, insulating or waterproofing. Cures at room temperature to form a tough rubber seal. Will not slump in overhead or vertical applications. Cannot be painted. Tack free: 30 min. Full cure: 24 hours. Temperature range: -65°F to 450°F.

Part number Size Pkg QtyLT-59630 .................. 80ml Tube ............................12LT-40464 ........190ml Pressurized Can ....................6LT-59530 .................. 80ml Tube ............................12LT-59575 ..............300ml Cartridge ........................10LT-40481 ....... 190 ml Pressurized Can ...................6

SuperflexTM Black & Clear RTV Silicone Adhesive Sealant

Make reliable gaskets in 1 minute! Return equipment to service immediately when you make leakproof gaskets in just one minute with Instant Gasket. Outperforms pre-cut gaskets. Noncorrosive. Reaches operating strength 15 psi; one minute. Temperature range: -75°F to 600°F.

Part number Size Pkg QtyLT-30509 .......... 5oz Pressurized can ......................6

Instant Gasket


100% silicone rubber adheres to metal, glass, wood, rubber, synthetics, ceramics, paper and plastics. Resistance to weather, ultraviolet light, and ozone is excellent. Good chemical resistance to most solvents, oils, organic and inorganic chemicals. Temp range: -85°F to 500°F. (High-Temp Red: 650°F.) Tack time: 15 minutes. Cure: 1 hr. Full cure: 24 hrs. USDA approved. Tube size: 10.3 fl. oz.

Part number Color Pkg Qty16-0000 ........................Blue .................................1216-0001 .......................White ................................1216-0002 ....................... Clear ................................1216-0003 ....................... Black ................................12

RTV Silicone Rubber Adhesive/Caulk

Part number Color Pkg Qty16-0004 ....................Aluminum ............................1216-0006 .....................Almond .*Special Order*...1231-005† .................Red, Hi-Temp .......................12

Automatic RTV Silicone Rubber Adhesive Industrial strength pressurized dispenser - saves time and product lasts longer. Makes any size or shape gasket instantly. Bonds to most materials. Not recommended for continuous use with gasoline, fuel oil, or other hydrocarbon materials. Tempe range: -85°F to 500°F. (High-Temp Red: 650°F) Tack time: 15 mins. Cure: 1 hr. Full cure: 24 hrs. USDA approved. 8 oz. pressurized can.

Part number description Pkg Qty31-006B ..........Hi-Temp. Super-Red .....................631-007B ..........Super-Blue .....................................6

For use light to medium consistency caulks and sealants. Features standard ratchet rod and spout cutter. For 10-12 oz. cartridges. Import.

Part number Pkg Qty21-301 .....................................................................1

Skeleton frame caulking gun delivers 3x's more thrusting power. Easily dispenses stiff caulks and sealants. Features seal puncture tool, spout cutter, heavy duty hex piston rod, quick pres-sure release for fast shut-off. Ladder hook, E-z load front cap and cartridge retainer spring. For 10-12 oz. cartridges. Import.


Standard Caulking Gun

Professional Caulking Gun

Chisel® Gasket RemoverChisel® is a super powerful gasket stripper that dissolves baked on gaskets, carbon deposits, paints, lacquers, adhesives and stubborn deposits from metallic surfaces. Eliminates scraping. Works in minutes.

Part number Size Pkg QtyLT-79040 ............... 18 oz. Aerosol .........................10 * Contains Methylene Chloride.

Part number description Pkg Qty31-008B† ........Super Black ....................................631-010B ..........Super-Clear .....................................6

Sealants, Gasketmakers & Removers

Saves time and labor for automotive and industrial personnel. Facilitates gasket removal, even when difficult. Excellent for automotive, marine, industrial, and farm machinery. Safe for use on metal surfaces. Leaves no film or residue (Formerly 16-0021B)


GASKeT & deCAL ReMOVeR 719


Lubricants

Heavy duty, temperature-resistant, petroleum based lubricant compound fortified with graphite and metallic flake. Inert, will not evaporate or harden in extreme cold or heat. Use in heavy pressure, and corrosive environments. Works to 1600°F. Eliminates corrosion, seizing, and galling. Allows easy disassembly of parts.

Part number Size Pkg QtyLT-76764 ...............1 lb. Brush-Top ........................10

Hi-Temp Anti-Seize Compound Spray

Loctite® C5-A® Copper Based Anti-Seize, exclusive formula suspends copper and graphite in a high quality grease. Protects metal parts from rust, corrosion, galling, and seizing at temperatures to 1800°F (982°C). For use with most metals under most conditions. Reduces friction and wear, speeds assembly and disassembly of parts. Do not use in oxygen service. Meets MIL-A-907.

Part number Size Pkg QtyLT-51005 ............. 10 oz. Brush-Top .......................12

Extreme temperature and pressure lubricant and sealant that plates, protects, and prevents metal surfaces from seizing at temperatures up to 2100°F. Reduces friction and wear. Water resistant. Provides for tighter, firmer threaded joints that open easier. Contains copper for superior heat dispersion. Excellent for all industrial maintenance and repair jobs. For use in refineries, power plants, chemical plants, and mining operations..

Part number Size Pkg Qty16-0025B .............. 14 oz. Aerosol .........................12

nickel Anti-Seize LubricantCopper-free. Recommended for stainless steel and other metal fittings in corrosive environments. Works to 2400°F. Eliminates corrosion, seizing, and galling. Allows easy disassembly of parts.

Part number Size Pkg QtyLT-77164 ...............1 lb. Brush-Top ........................10

Silver Grade Anti-Seize Lubricant

C5-A® Copper-Based Anti-Seize Lubricant

QuickStix C5-A Copper Anti-SeizeQuickStix™ C5-A® Copper Grade Anti-Seize Stick provides a shield against high temperature seizing and galling. All mated parts, studs, bolts, flanges and gaskets, remove more easily and in cleaner and better condition. This product can be used on copper, brass, cast iron, steel, all alloys including stainless steel, all plastics and all non-metallic gasketing materials.

Part number Size Pkg QtyLT-37229 ..................20gm Stick............................10LT-39222 ..................40gm Stick............................10

QuickStix Silver Grade Anti-SeizeQuickStix™ Silver Grade Anti-Seize. New semi-solid stick offers the same performance characteristics as the Loctite® Silver Grade Anti-Seize paste in a convenient semi-solid stick form. Stick package offers more portability and less mess.

Part number Size Pkg QtyLT-37230 ..................20gm Stick............................10LT-39223 ..................40gm Stick............................10


LubricantsTap Magic® Cutting Fluid

Use on Tap Magic on any metal cutting operation. Works on all metals... stainless steels, aluminum, titanium, inconel, brass, magnesium, cobalt, monel, copper, nickel, beryllium,

bronze, cast irons, molybdenum and more. Non-hazardous to atmosphere. EP-XTRATM FOR EXTENDED TOOL LIFEPart number Size Pkg Qty30-244 ........... 4 fl. oz. Spout-top Can .................2430-245 .......... 16 fl. oz. Spout-top Can ................1230-246 ..................... 1 gal. can .............................2

Finest quality, special purpose sulfur-lard thread cutting oil formulated with petroleum oils and special additives, including an odorless germicide that helps avoid rancidity and skin irritation. Cools, speeds metal removal, and produces smooth, clean threads. Will not congeal at 20°F. Excellent for drilling, turning and other metal cutting operations. Not recommended for lubricating parts.

Part number Size Pkg Qty16-301GL ................ 1 gal. Bottle .............................4

dark Cutting Oil

LPS edge CremeTM Cutting lubricant in a convenient paste form. Use with drills, reamers, annular cutters, hole saws, taps and dies. Excellent for vertical applications. Edge Creme speeds

metal removal and produces smooth, clean threads. Must be applied before the cutting operation begins. May also be used to pre-coat threads, seals and O-rings.

Part number Size Pkg Qty30-247 .................... 11 oz. Tube ...........................10

LPS edge LubeTM Cutting lube in a solid, white, waxy bar. Excellent for vertical or overhead applications. Use on drills, taps, reamers, grinding wheels, sanding belts, hole saws and band

saws. Cools, speeds metal removal, and produces smooth, clean threads. May be applied before the cutting operation begins, or while tool is in operation. Biodegradable.

Part number Size Pkg Qty30-248 .....................13 oz. stick ...........................10

Clear synthetic coolant and lubricant designed to disperse heat and extend tool life. Convenient aerosol is ideal for field operations. Works on exotic metals. Non-irritating to the skin. Transparent fluid provides clear view of work area. Includes extension tubes for easier application to remote areas

Part number Size Pkg Qty *Not recommended for use on aluminum or copper.16-0018B .............. 14 oz. Aerosol ........................12

CUTTInG And TAPPInG FLUId

Extreme-condition, dry, friction-reducing lubricant and anti-seize coating. Withstands high temperatures and extreme pressures. Provides a dry film lubricant especially suited for use in dirty or dusty atmospheres. Burnishes into metal to provide long-term lubrication and protection. Inert to water, oil, alkalis and acids. Contains no methylene chloride.Temperature range: -110°F to 1000°F.


dRy MOLy FILM LUBRICAnT And COATInG


BruteLubeTM Cutting Fluid

This high-grade, dry graphite aerosol is designed to eliminate friction and protect high-use equipment from rust and corrosion. It’s a durable, heavy-duty lubricant that can endure extreme temperature fluctuations ranging from –100°F up to 800°F. Plus, its dry formula will not collect dirt and dust.

Part number Size Pkg Qty30-065 .................. 12 oz. Aerosol .........................12

Effectively extends the life of cutting tools and provides a superior work-piece finish. Specially formulated to cling to cutting tools for a continuous shield against friction and heat. Cutting tools run cooler and last longer, dramatically slashing tool costs. BruteLubeTM cutting fluid is especially effective on aluminum, stainless steel, and many exotic alloys. Complies with O.S.H.A. regulations. Does not contain 1,1,1 Trichloroethane. U.S.D.A. authorized.

Part number Size Pkg Qty30-243 ........... 16 oz. spout-top bottle .................12

Concentrated synthetic coolant dissolves in water for recirculating mist or flood systems in machine shop production applications. Safe to use on all metals and alloys. Contains special corrosion inhibitors to protect finished work from flash rusting. When diluted with water, it makes a clear solution to give the operator an unobstructed view of the work-piece. Dilution ratios can be varied for the best economy under various conditions. Does not contain silicone or sulfur. Biodegradable.

Part number Size Pkg Qty *Also available in 55 gallon drums16-303GL ................ 1 gal. Bottle .............................4 Coolant misting systems and nozzle 16-303PL ..................5 gal. Pail...............................1 positioners available on request.

A quality pneumatic tool lubricant for manual application or use in automatic lubricators. Light viscosity will not form varnish or sludge in tool. Amflo brand.

Part number Size Pkg QtyAF-1220-1................ 1 pt. bottle ............................12AF-1220-8............... 1 gal. Bottle .............................4

Metalworking Coolant & Lube

dry Graphite Lubricant

Air Tool Oil Light Viscosity

Lubricants

Special penetrating, lithium-based formula that sprays as a liquid to flush off old contaminated lubricant, creep deeply into working parts, and then set up to a viscous, thick grease. Withstands temperatures up to 500°F. Highly resistant to water, acid and detergent wash. For use on gears, valves, winches, conveyors, linkages, and hoists. Includes extension tubes for easier application to remote areas.


Foaming rust protective lubricant that penetrates to the core of cable and chain. Provides superior friction reduction and wear resistance. Thick formula base with tackifier to help prevent throw-off and weather wash-out. Fortified with Molybdenum Disulfide to withstand extreme temperature and pressure. Excellent salt spray resistance. Extends cable life.

Part number Size Pkg Qty16-0017B ............. 12 oz. Aerosol ........................12

CHAIn And CABLe LUBRICAnT - FOAMInG

Red SPRAy GReASe


Lubricants

Provides a moistureproof barrier that lubricates and protects electrical equipment from salt, dirt and corrosion. High dielectric strength. Good thermal, oxidation and chemical stability. Temperature resistant to 400°F.

Part number Size Pkg QtyLT-30536 ..................33 oz. Tube ..........................12

A heavy duty lithium-based grease for use where a visible, water resistant film is required. Aerosol formula cures to a thick grease that resists water wash-out. Prevents rust. Heat resistant to 380°F (dropping point). Use on: chains, linkages, over-head door tracks, bearings, slides, rollers, hinges, sprockets, small gears. Part number Size Pkg QtyLT-30543 .............10.75 oz. Aerosol.......................12

Specially formulated hydraulic oil with an anti-wear additive that is noncorrosive, prevents internal rust and corrosion, sludge buildup, preserves seals and improves lubrication. Use in forklift trucks, jacks, motorcycle front forks. Non-foaming. Temperature range: -40°F to 120°F.

Part number Size Pkg QtyLT-30523 ................. 1 gal. Bottle .............................6

High tack lubricant that penetrates deep into gear teeth and cable before thickening to a heavy black stringy lubricant. Automatically re-coats gear teeth with each revolution of the mechanism. Contains high wear-resistance additives to prevent viscosity breakdown and spin-off. Unique dual spray valve - pencil spray for those hard-to-reach areas or fan spray for laying down a film.

Part number Size Pkg Qty16-0052B ..................... 18 oz ................................12

Open Gear Lubricant

Hydraulic Jack Oil

White Lithium Grease

dielectric Grease

Lithium grease has excellent water resistance, mechanical stability and protection against rust, oxidation and corrosion. A petroleum hydrocarbon lubricant for general

purpose applications in industrial, automotive, farming, mining, and construction industries. Use on plain and anti-friction bearings, gears and couplings. NLGI No. 2 density. Color: black.

Part number Size Qty ............................14 oz. Cartridge ........................10PW-30-127 ..... 3 oz. Cartridge, 3/pkg ............ 1 PKG

Multi-Purpose Lithium Grease

A multipurpose grease for hinges, locks, latches, battery terminals, switches, shackle pin and spring assemblies, threaded assemblies and

more. Temperature range: -10°F to 265°F. NLGI No. 2 density and softer.

Part number Size Pkg QtyPW-30-140 ............... 1 lb. can .............................12

White Lithium Grease

Special additives enable this grease to withstand the heavy impact and pounding pressure common to heavy equipment. Resists spatter and pounding out through the bearing or fitting. Resists water washout from pressure washers. NLGI No. 2.5 density. Temperature range: 0°F to 550°F. Color: Green.

Part number Size Pkg Qty30-999 .................14 oz. Cartridge ........................10

Super Impact Grease


LubricantsLong-Lasting Synthetic Lubricant with Teflon®

Super Lube® Grease is a patented synthetic, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of PTFE micro powders combine to form a premium lubricant that provides protection against friction, wear, rust and corrosion over a temperature range of -45°F to +450°F. Super Lube® Grease is a USDA/NSF listed Food Grade lubricant NLGI-2, rated H-1 for incidental food contact, and will not run, drip, melt or separate. Compatible with most other lubricants, Super Lube® outlasts conventional greases 3–4 times.

Part number Size Pkg QtyLT-82325 .................. 3 oz. Tube ...........................12LT-20029 ............... 11 oz. Aerosol .........................12LT-82328 ............ 14.1 oz. Cartridge ..................... 12LT-82329 ................... 1 lb. Can .............................12LT-82331 ...................30 lb. Pail...............................1LT-82357 ..................120 lb. Pail..............................1

Loctite ViperLube High Performance Synthetic Grease, NLGI Grade 2/Severe Duty GC-LB Grease provides superior protection for equipment exposed to a wide range of operating temperatures and environments. Use as a lubricant and protective anti-rust film on bearings, machine parts, equipment, or as a release agent on gaskets and seals. NSF H1 rated for incidental food contact.

Part number Size Pkg QtyLT-36781 .................. 3 oz. Tube ...........................12LT-36786 ............... 10 oz. Aerosol .........................12LT-36782 ..............14 oz. Cartridge ....................... 12LT-37061 ...................30 lb. Pail...............................1

ViperLube High Performance Synthetic Lubricant

Especially designed bearing lubricant for the high-temperature requirements of all disc and drum brake applications. NLGI No. 2.

Part number Size Pkg Qty30-133 ....................... 1lb Can ..............................12

Provides anti-wear, anti-seize coating to the internal parts of engines and transmissions. Provides instant lubrication during initial start up before the motor oil has circulated. Also

used for lubricating automotive hinges, locks and latches, distributor cams, press fits, battery terminals, switches, . NLGI No. 0 density. Temp. range: -30°F to 170°F. Color: White.

Part number Size Pkg QtyLP-L0034-094 ...... 10 oz Cartridge ........................12

The ideal multi-purpose high temperature, extreme pressure, water repellent, protective lubricant. Use for general lubrication of industrial, automotive, construction, marine, and

farm equipment. NLGI No. 2 density. Temperature range: 0°F to 350°F. Color: Tan. Lubriplate brand.

Part number Size Pkg QtyLP-L0072-098 ...... 14 oz Cartridge ........................10

Lubriplate® no. 630-2 Multi-Purpose Grease

Lubriplate® no. 105 Motor Assembly Grease

Wheel Bearing Grease


LubricantsRed Grease is an all purpose non-melt grease especially formulated with extreme pressure and anti-wear additives to provide heavy duty service. It is one of very few greases able to withstand heavy shock load and impact pressures of 65 Timken load capabilities. This product has excellent adhesive and cohesive properties. It resists most acids, weather, dirt, salt-spray, steam and oxidation. Our product protects equipment indoors or outdoors even under high temperatures and heavy loads.

Part number Size Pkg Qty30-1011 ................14 oz. Cartridge ........................10

Red Grease

Concentrated copolymer formula is the most effective penetrant available today. B'laster frees rusted bolts, nuts, joints, pipe threads, frozen heat risers and more. Stops rust and corrosion. Lubricates fishing reels, guns and sporting equipment. Restores life to rubber seals and "O" rings. Displace moisture and does not evaporate—spray inside distributor to starts wet engines. Makes and excellent bug & tar remover too! Used by the US Navy, Army Corps of Engineers, Air Force, major steel companies, and more. Part number Size Pkg Qty15-706 .................. 12 oz. Aerosol ........................12 *Extremely flammable.15-705 ......................... 1 gal. ..................................4

A chlorinated, high solvency penetrant that quickly cuts through dirt, rust and scale to creep into parts which have become frozen or encrusted with corrosion. Provides long lasting lubrication, reduces friction, and will not become dry or brittle. Seals water from treated surfaces. Helps dry out and protect wet electrical gear and other moisture sensitive parts. Non-flammable. Includes extension tubes.


Hoil Penetrating Oil is the ideal way to loosen frozen nuts, bolts, shafts, screws, pipes, motors and machine parts. It has sufficient body to lubricate the surfaces to be disengaged while preventing damage to the threads. As a preventive measure, it retards corrosion of tools and tool room equipment. (Formerly 16-0014B)Part number Size Pkg QtySW-961 ................. 19 oz. Aerosol .........................12

Lubricates, cleans, protects, penetrates and displaces moisture. Stops squeaks and frees sticky mechanisms. Leaves no messy, gummy residue. Dries out electrical and electronic equipment. Use on corroded parts, fasteners, fittings, valves, chains, cables, linkages, hand tools, hinges and locks. Non-hazardous to atmosphere. Silicone-free. Extension tube included. Extremely flammable. USDA authorized H-2.

Part number Size Pkg Qty30-115 ................... 12 oz. Aerosol .........................1230-116 ............... 1 gal. can (128 oz.) .......................4

Penetrating Lubricant nonflammable Penetrant

HOIL Penetrating Oil & Rust Preventative

Powerful Penetrating Catalyst

Wd-40 Multi-Purpose Lubricant


LubricantsSolvo-Rust® is a super penetrating rust inhibitor that works quickly to free rust-locked part and keep them lubricated and protected from rust. This powerful product may be applied on or near moving parts. Loosens rust, tar, grease, dirt, carbon deposits and corrosion. Cleans metal parts and lubricates to prevent rust. Will not harm painted surfaces.

Part number Size Pkg Qty *Extremely flammable.LT-81252 ......................13 oz.................................12

Our most economical 3-in-1 lubricant. Loosens everything rusted or corroded and it works especially well on salt water corrosion. Penetrates close fitting parts on contact.

Cleans and removes light rust. Spray on corroded parts, fasteners, fittings, valves, chains, cables, linkages, hinges and more. Will not harm painted surfaces.

Part number Size Pkg Qty *Extremely flammable.30-239 .................. 11 oz. Aerosol .........................12

Works as a lubricant, a penetrant, a moisture displacer, a protecting corrosion inhibitor, a solvent cleaner, a mold release agent, and a cutting fluid. Super-Tef leaves a protective shield that rejects dirt, ice, salt, acids, alkalis, rust, water and weather. Applications: pulleys, hinges, locks, lathes, linkages, clutch and brake cables, garage door tracks, drive chains, motorcycle chains, valves, air tools, conveyors, engine cylinders, cutting tools, hand tools, vises, appliances and more. Use it on practically anything that moves! Pleasant fragrance

Part number Size Pkg Qty30-990 .................. 11 oz. Aerosol .........................12 Extremely flammable.

Solvo-Rust® Super Penetrating Oil

nUTS OFF® Penetrant

SUPER-TEF Synthetic Lubricant with Teflon®

Electrical Grade Silicone Spray is a multi-purpose lubricant that protects and waterproofs with a thin, clear, non-staining film. This non-hardening lubricant minimizes corrosion. Its low surface tension permits better coverage and deeper penetration. It may be safely used on machinery used for producing, manufacturing, packaging, processing, preparing, treating, transporting or holding food when used in accordance with the appropriate regulations. (Formerly 16-0061B) Part number Size Pkg QtySW-948 ................. 11 oz. Aerosol .........................12

Silicone Spray is colorless, non-staining, waxless and heat stable; unaffected by temperatures ranging from -40°F to over 392°F. This friction reducer results in speedier clean-up of parts and equipment and increased production through cleaner job processing. It remains dry and is non-staining. Complies with FDA regulations applicable to the food packaging/food processing industry. (Formerly16-0114B)


electrical Grade Silicone Spray

economy Silicone Lubricant


fiberglass tape, activated by water, for reliable, temporary repairs of metal, plastic, and composite pipes. Includes Loctite® Fixmaster® Metal Magic Steel™ epoxy stick, urethane impregnated fiberglass tape, and gloves. Cures in 30 minutes. Meets requirements of USDA for incidental food contact. NSF approved, Standard 61. Should not be used on a pipeline that is carrying caustic, hazardous or otherwise harmful materials.

Part number Size Pkg QtyLT-96321 ................... 2" X 6 FT ...............................6LT-96322 .................. 4" X 12 FT ..............................6

Miscellaneous ChemicalsFixmaster® Pipe Repair KitLoctite® Pipe Repair Kit. Urethane impregnated

Use Clover® machining compounds for final finishing of metal surfaces not practical with mechanical methods. Silicone carbide grease mix is the standard abrasive paste for fast metal removal. It produces a smooth, flat surface but not a polished one. Leaves a rust-preventing film on lapped surfaces. Meets requirements of USDA for incidental food contact. NSF approved, Standard 61. Container size: 1 lb. cans

Part number Grit Pkg QtyLT-39452 ...................120 Coarse ............................6LT-39439 ...................180 Medium ...........................6 Also offered in a wide variety of grits from 36 (very coarse) toLT-39413 ...................240 Med-Fine ........................6 1200 (extremely fine). Container sizes also available are 7lbLT-39510 ...................320 Fine.................................6 (4 per case), 25 lb. and 100 lbLT-39549 ...................600 Very Fine ........................6

Clover® Lapping and Grinding Compound

Start engines fast, even in temperatures down to -65°F. Contains twice the Ether content of ordinary starting fluids for twice the starting power. Contains upper cylinder lubricant to help protect your engine during starting. Use on gasoline or diesel engines.

Part number Size Pkg Qty Note: Starting Fluid is now "UPS-able" without MS-SFP-16 ........... 11 oz. Aerosol .........................12 additional hazardous shipping charges.

Master® disc and drum Brake Fluid Heavy duty DOT 3 rated fluid for disc and drum brakes. Meets or exceeds SAE J1703, Fed. Specs VVB-680.

Part number Size Pkg QtyMS-FF168............... 1 gal. Bottle .............................4

Master® Pro Formula engine Starting Fluid

Prevents gas line freeze-ups and stalling. Use year-round to de-water fuel system. Absorbs moisture for smoother engine performance. Contains methanol.

Part number Size Pkg QtyMS-GA-12...............12 oz. Bottle ..........................24

Master® Gas Line Antifreeze & Fuel dryer

Windshield Washer Ready MixReady-to-use cleaning solvent protects to -20°F. Vehicle defroster must be operating when used during freezing temperatures. Contains methanol.

Part number Size Pkg Qty16-0098 ........................1 gal...................................4


Brand name product fits standard burners, propane torches, lanterns, stoves, etc. Disposable steel cylinder contains grade HD-5 propane per NGPA standards.

Part number Size Pkg Qty30-242 ................ 14.1 oz. Cylinder .......................12 THIS ITEM CANNOT BE SHIPPED vIA U.P.S.

Miscellaneous Chemicals

LOCK-THAW® Lock deicers

Propane Fuel Cylinders

Master® Windshield Spray de-IcerMelts frost, ice, and snow from auto glass and mirrors for safe winter driving. Great for thawing frozen locks, doors, and headlights too! Harmless to automotive finishes. Master brand.

Part number Size Pkg QtyMS-WD-16 ...........11.5 oz. Aerosol ........................12

Frees frozen locks. Lubricates and protects all types of locks from freezing and sticking. Penetrates to working parts. Gold Eagle brand.

Part number Size Pkg Qty31-713 ............1 oz. Pressurized Can ...................1231-714 .......... 5/8 oz. Pressurized Can .................12

Odorless, water-based insecticide designed to kill both flying and crawling insects. Features a powerful combination of insecticides that provide up to six weeks residual killing action on a broad spectrum of crawling insects. Unique aerosol valve system delivers a fan spray for flying insects and a stream spray for crawling insect control. (EPA Registered) This product is registered for sale in the following States: CT, FL, GA, IN, IL, MO, NC, NJ, NY, OH, PA, SC, VA, WV.

Part number Size Pkg Qty31-015B ................ 16 oz. Aerosol .........................12

The wasps are dead before they hit the ground. Ideally suited for condo’s, apartments, municipalities, utilities, cable companies, power plants and tree trimmers. For outdoor use only. Nonconductive up to 28,000 volts. EPA registered.


TRIPLe PLAy FLyInG & CRAWLInG InSeCTICIde

Wasp & Hornet Killer

expanding Foam Sealant A minimal expanding foam product that seals cracks, fills holes and insulates. Insulate around drafty electrical outlets and ceiling fixtures. Forms a durable, air-tight and weatherproof bond to wood, metal, glass and most plastics. Dries tack-free in 15 mins.

Cures in 4 hrs. Part number Size Pkg Qty16-0073B .............. 12 oz. Aerosol .........................12

Stainless Plumber's PuttyA stainless fixture setting compound for plumbing rims, faucets, strainers, and toilet bowls. Use wherever a nondrying watertight seal is needed. Never hardens, flakes, crumbles, cracks or shrinks.

Part number Size Pkg Qty30-003 ............... 14 oz. Plastic Tub ......................12


Accessories

For 7" and 9" rollers. Standard galvanized steel 2 quart capacity. Rust retardant.

Part number Pkg Qty17-075 ...................................................................10

Black plastic liner makes cleanups easy. Fits in paint tray above.

Part number Pak Qty17-076 ...................................................................10

For standard 9" rollers covers. Durable 5 wire cage.


Economical and disposable. 3/8" nap thickness for use on smooth or semi-smooth walls. 9" in length. 100% polyester with phenolic core. Use with latex paints only.

Part number Pkg Qty17-073 ...................................................................24 (shipped in twin packs)

Can be used with all types of paint. Lint-free synthetic glove with protective plastic liner. Use on fences, railings, pipes and hard-to-reach areas.


9" Paint Roller Covers

9" Paint Roller Frame

Galvanized Paint Tray

Plastic Tray Liner

Painter's Mitt

Rotary handle pumps product in both directions. Bung adapter. Cast iron head, steel tubes. Fits all standard 15 to 55 gallon drums. Pumps approx. 1 gal. per 18 revolutions. Not for use with water-based liquids.

Part number ............................................... Pkg Qty FOR LIGHT vISCOSITy 12-081 .....................................................................1 PETROLEUM BASED LIqUIDS

Steel head, curved spout is removable for garden hose attachment. Brass valve, steel cylinder, bung adapter. Fits all standard 15 to 55 gallon drums. Not for use with water-based liquids.

Part number Pkg Qty USE WITH PETROLEUM12-55017 .................................................................1 BASED LIqUIDS ONLy

Plastic trigger sprayer with adjustable nozzle and graduation marks on bottle. Leakproof model equipped with a Viton® seal for resistance to mild corrosives and solvents.

Part number Size Pkg Qty31-019 ........16 oz. Plastic Sprayer .......................1231-020 ........32 oz. Plastic Sprayer ..................1231-021 ........32 oz. Leakproof Plastic Sprayer ......12

Trigger Sprayers

Barrel Pump

Rotary Barrel Pump


Fits standard one gallon cans. Dispenses brake fluid at approximately one ounce of fluid per stroke. Comes complete with 36" flexible tubing with check valve in metal nozzle. Also used for penetrating oil, model airplane fuel, air tool oil and other petroleum based liquids.Not for use with water-based liquids.

Part number Pkg Qty FOR LIGHT vISCOSITy 12-70060 .................................................................1 PETROLEUM BASED LIqUIDS

Ambidextrous, lightly powdered. Not for medical use. Color: white. 100 count dispenser package. Imported. Part number Size Pkg Qty23-400 ....................... Small ....................................123-401 ....................... Medium ................................123-402 ....................... Large ....................................123-403 ....................... Extra-Large ..........................1

disposable Latex Gloves

Brake Fluid Pump

Manual closing lever handle. Use with most acids, caustics, and oils.

Part number Size Pkg Qty30-268 ............2" NPT Jumbo Faucet .....................130-269 .........3/4" NPT Standard Faucet .................1

Self-closing (normally closed position). Cast bronze body, bronze mesh internal screen and Teflon® seat.

Part number Size Pkg Qty12-082 ............3/4" NPT male thread. .....................1

Strong handle that locks in place and spray wand snaps on handle for storage. Tank is translucent easy to see liquid level. Easy to pump up. Adjustable nozzle from mist to long range. Funnel top for easier filling. Includes no-kink hose and instant on/off control valve. Use for insecticides, weed killers, disinfectants, degreasers, furniture/rug protectants, wallpaper remover, etc..

Part number Size Pkg Qty29-475B .................... 3 gallons ...............................1

SPRAyeR RePAIR KITSPump Maintenance Kit - Rubber parts and seals for pump. Part no. 29-477Spray Wand/Valve Kit - Control valve, spray wand and handle. Part no. 29-478

This handy tool easily removes the plastic lids from pails. Works just like a bottle opener.


Divided into four sections. Includes lock and two keys. Easily wall mounted using keyholes provided. Gray baked enamel finish. Size: 34"W x 22"H x 8-1/2"D. Shipping wt. 45 lbs.


Accessories

Polyethylene Barrel Faucet

Bronze Barrel Faucet

Aerosol Storage Cabinet

Polyethylene Sprayer & Repair Kits

Plastic Pail Opener


Low-cost sorbent pads are designed specifically for oil spills. Two layers of melt-blown polypropylene are ultrasonically bonded for added strength and decreased linting. “Dimples” build strength and allow fluid to spread through the material quicker for your best absorption rate. Oil-Only pads will absorb oil, but not water...and they float! Perfect for oil spills in waterways and marinas as well as around machinery and vehicles in your plant or shop. Made in USA. Color: white. Dimensions: 17 in. W x 19 in. L. Fabric weight: 12 ounces. Absorption rate: 25 gal./casePart number Size Pkg QtyST-US-M-WH ........... 100/case .......................1Case

Absorbs most fluids. Extra durable to handle most leaks, drips and spills. Use all around your shop and high traffic areas. Two layers of melt-blown polypropylene are ultrasonically bonded for added strength and decreased linting. “Dimples” build strength and allow fluid to spread through the material quicker for your best absorption rate. Absorbs non-aggressive fluids, hydraulic fluids, motor oils, cutting machine oil and coolant, soaps/cleaning agents, radiator anti-freeze, water and solvents. Perfect around machinery, work stations, aisles and walkways. Made in USA. Color: Gray. Dimensions: 17 in. W x 19 in. L. Fabric weight: 12 ounces. Absorption rate: 25 gal./casePart number Size Pkg QtyST-GPB100H ............ 100/case ......................1 Case

General Purpose Sorbent Pads

Oil-Only Sorbent Pads

General Purpose Sorbent Socks

Thicker than pads, so they can soak up more liquid. Toss a few pillows inside a contained spill, in drip pans or stuff them into corners. For non-aggressive fluids, oils, coolants, water and solvents. Made in USA. Color: Gray. Dimensions: 9 in. x 9 in. Part number Size Pkg QtyST-GPIL40 ................. 40/case .......................1 Case

When spills are at their worst, it's time for sorbent socks. Contains liquids before spreading to floors and walkways. Ideal for surrounding leaking barrels and machines. Overlap to achieve desired length. Wrap them around irregular surfaces and corners. For non-aggressive fluids, oils, coolants, water and solvent. Made in USA. Color: Red. Dimensions: 3 in. x 48 in. Absorption rate: 30 gal./case

Part number Size Pkg QtyST-RS0430 ................ 30/case .......................1 Case

General Purpose Sorbent Pillows

Accessories

neoprene Liquid Proof GlovesNeoprene coated gloves offer a great value in coated gloves by combining superior chemical resistance with grip and flexibility at a low cost. These gloves have an attractive shiny black color, and their premium neoprene coating is well-suited for use with oils, acids, caustics, grease, and most solvents and chemicals.

Part number Length Cuff Pkg21-265 ............10" .......................Knit wrist ..........1221-266 ............12" .......................Gauntlet ...........1221-267 ............14" .......................Gauntlet ...........1221-268 ............18" (Elbow) ..........Gauntlet .............621-269 ............31" (Shoulder) .....Gauntlet .............6

Our new MIGHTY BLUETM is ideal for: Automotive paint and prep, Concrete finishing, Wood stain & varnish, Mild cleaning agents, Non-corrosive chemical clean up. Our new 15mm heavy duty disposable latex glove features a light texturing that provides excellent grip. These gloves are ambidextrous to make them more versatile and the beaded cuff allows for easier on/off access. Fifty count per dispenser box. Part number Size Pkg QtyBMC-1UL0015 ........... M-L-XL .................................1

MIGHTy BLUe Gloves


AAcetylene 16-13

Fittings 16-12Flashback Arrestors 16-12Torch Tips 16-14Welding Hose 16-13

Alloys, Welding 16-11, 16-12Arc Welding Rods 16-11

BBrazing Rod 16-11Bump Caps 16-19

CCable

Welding 16-16Caps, Bump 16-19C-Clamps

Drop Forged 16-15Chipping Hammer, Weld 16-16Clothing, Disposable 16-110Coveralls, Disposable 16-110Cutting Tip Refacing Tool 16-15Cutting Tips 16-14

DDisposable Coveralls 16-110Drill

Tip Kit, Welding 16-15Driver's Gloves 16-112

EEar Plugs 16-19Electrical

Solder 16-13

FFace Shields/Headgear 16-19Filters

Welding Lens 16-16Flame Retardant Welder's Coat 16-

112Flashback Arrestors 16-12Flints, Spark Lighter 16-15Flow Check Valves 16-12

GGlasses, Safety 16-18Glove Liners 16-111Gloves 16-111, 16-112Goggles, Safety 16-17

HHammer, Chipping 16-16Hard Hats 16-19Headgear

Face Shield 16-19Hearing Protectors 16-19Helmet Liner 16-18Helmets

Protective 16-19Holder

Soapstone 16-18Hose

Welding 16-13

KKester Solders 16-13

LLatex Gloves 16-111Lenses, Welding 16-16Lighter, Spark 16-15Lil' Brazer Welding Rod 16-11Liners

Winter Helmet 16-18

MMarkers, Paint 16-18Marking Tools

Soapstone 16-15Masks, Dust & Particle 16-110MIG Welding Wire 16-12MOLDEX RESPIRATOR 16-110

PPaint Markers 16-18

RRefacing Tool, Cutting Tip 16-15Rod

Brazing 16-11Welding 16-11

RubberGloves 16-111

SSafety

Ear Plugs 16-19Face Shields & Visors 16-19Flashback Arrestors 16-12Goggles 16-17Hearing Protectors 16-19

Helmets (Bump Caps) 16-19Soapstone & Holders 16-18Spark Lighters 16-15Spectacles, Visitors 16-18String Gloves 16-111Sweat Bands 16-16

TT-Handle Tank Wrench 16-15Tip Cleaners, Torch 16-15Tip Drill Kit 16-15Tip Refacing Tool 16-15Tips, Torch 16-14Tools

C-Clamps 16-15Chipping Hammers 16-16Cutting Tip Refacer 16-15Soapstone Holders 16-15Tank Wrench 16-15Tip Drill Kit 16-15Torch Tip 16-15Welding 16-16

TorchCutting Tips 16-14Tank Wrench 16-15Tip Cleaners 16-15Tip Refacing Tool 16-15

Tyvek® style Coveralls 16-110

VValve-Action Markers 16-18Valve-Action Paint Markers 16-18Valves

Reverse Flow Check 16-12Visors, Faceshield 16-19

WWelding

Alloys 16-11, 16-12Cable 16-16Coats 16-112Electrodes 16-11Filters 16-16Flashback Arrestors 16-12Goggles 16-17Hammers 16-16Lenses 16-16MIG Wire 16-12Reverse Flow Check Valve 16-12Rod 16-11Soapstone Markers 16-18Tip Tools 16-15Wire, MIG 16-12

Winter Liners 16-18Wire

MIG 16-12Solder 16-13

Work Gloves 16-112

Section 16 Welding & Safety Products

16-II FAX: (219)-696-6413 • WEBSITE: http:/www.mpi-online.com


Production Arc Welding electrodes

PowerWeld7018 is a low-hydrogen electrode for use in all positions on low, medium and highcarbonsteels. 70,000 PSI tensile strength. Ideal for out of position welding and tacking. Runs on ACor DCEP (reverse) polarity. Features a steady arc with low spatter and medium penetration,providing X-ray quality weld deposits.

ApplicationsPowerWeld 7018 is typically used for heavy ma-chinery fabrication, pressure vessels, field and shopwelding of bridges and structural steels, cast steels and shipbuilding, or most ASTM specificationson medium carbon and low alloy steels.Part Wt./Pkg Orderno. dia. (lbs) Qty21-408 3/32 5 1 Pkg21-410 1/8 5 1 Pkg

Powerweld 6013 is a high titania coated elec-trode. This electrode provides good wetting and shallow penetration for thin sheet metal applications (using smaller diameter electrodes), but with suf-ficient penetration for welding medium gauge steel. Powerweld 6013 is an all purpose electrode that provides a soft steady arc which is easily regenerat-ed, easy slag control for wertical-down welding, low spatter and a beautiful bead appearance. Powerweld 6013 electrodes may be used in Any position with ac or dc (straight or reverse polarity).

ApplicationsPowerweld 6013 is commonly used for automo-bile bodies, truck frames and bodies, ornamental iron,Metal furniture, farm implementations, machin-ery guards, storage tanks, or wherever appearance isImportant or desirable.

Part Wt./Pkg Orderno. dia. (lbs) Qty21-404 3/32 5 1 Pkg21-406 1/8 5 1 Pkg

LIL' BRAZeR FLUx COATed BROnZe BRAZInG ROd FOR STROnG WeLdS

Bronze alloy for torch brazing most ferrous and nonferrous metals (not for aluminum). Use on mufflers and exhaust pipes, bicycles, sheet metal and small mechanisms.Tensile Strength up to 64,000 psiWorking Temperature 1600°FHardness HB 80-110

ORdeR QTy. - 1 PKGPart no. Size Pcs/Lb Wt/Pkg21-392 1/8 x 18 14 1 LB

Flux color: White.

Maintenance electrodes & Brazing

Rods

We offers six types of tungsten electrode to cover every TIG welding application. Electrodes are 7" (175mm) in length and packaged 10 rods per box. All tungstens have color coded tips for easy identifica-tion, and meet AWS A5.12 specifications. Electrodes are supplied with a smooth, round, bright centerless ground finish.

16-2 FAX: (219)-696-6413 • WEBSITE: http:/www.mpi-online.com

MIG Welding WireTyPe e71T-GS FLUx CORe STeeL

MIG WeLdInG WIReFeaturesNo Shielding Gas Needed, Single Pass Welding of Thin Gauge Galvanized SteelExcellent for Outdoor Use, Smooth Arc – Minimal Spatter, DC- Straight Polarity, Works Well In WindDescriptionSmooth Core gasless wire E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.ApplicationsSmooth Core gasless wire E71T-GS is most popular for the home workshop welder because it works so well on 110 volt machines and can be used on thin gauge steel. Gasless wire E71T-GS is used quite extensively in automobile body shops for door or body repairs and it is also used for sheet metal duct work on lap and butt joints.NOTE: As with all self-shielded wires, Smooth Core gasless wire E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in anenclosed area, be sure that the ventilation is adequate.

ORdeR QTy. - 1 ROLLPart Wire Spoolno. diameter Size21-412 .030 2 LB21-413 " 10 LB21-414 .035 2 LB21-415 " 10 LB

TyPe eR70S-6 SOLId STeeL MIG WeLdInG WIRe

SpecificationsAWS A5.18 Class ER70S-6DescriptionS6 contains high levels of manganese and silicon for stronger deoxi-dizing power where stringent cleaning procedures are not possible. This wire has been designed to provide X-ray quality porosity-free welds and the highest tensile strength (as welded) of the plain carbon steel wires. The high silicon content increases the fluidity of the weld pool, creating a smoother bead appearance and resulting in minimal post-weld grinding. S6 is excellent where poor fit-ups or rusty and oily plates may be used.ApplicationsConstruction work, tanks, truck bodies, farm implements, pipes, steel castings or forgings, shaft build-ups and general shop fabrications.

ORdeR QTy. - 1 ROLLPart Wire Spoolno. diameter Size21-416 .023 2 LB21-417 " 10 LB21-418 .030 2 LB21-419 " 10 LB21-420 .035 2 LB21-421 " 10 LB

Flashback Arrestors

Extra protection against flashbacks that can ignite hoses or gases. Flashback arrestors help prevent flashback flames caused by reverse gas flow. Replaces low quality or defec-tive reverse flow check valves. Integral reverse flow check valve guards against reverse flow of flammable gas mixtures. Flame arrestor quenches flashback flames. Durable brass construction. 100% tested. Color-coded red for fuel gases, green for oxygen. Maximum cutting capacity is 10". Manual resetting not required. Fits all standard torches and regula-tors. B-Size, 9/16-18.

TORCH MOUnTed SeTInstalled at the torch end to provide added protection of more components - hoses, regulator and cylinder. Fits all standard B-size (9/16-18") torch inlets. UL listed. Set of 2, carded. Pkg: 1 SET. Part no. 21-355

ReGULATOR MOUnTed SeTSubject to less contamination and abuse. Easily mounts to any B-size (9/16-18) outlet nipple on regulator. UL listed. Set of 2, carded. Pkg: 1 SET. Part no. 21-356

Swivel nut Welding Hose Connectors

Part 1 2 Pkgno. Hose I.d. Thread Size Qty

RIGHT-HAnd THReAd (OxyGen)13-416 3/16" 9/16-18 613-418 5/16" 9/16-18 6

LeFT-HAnd THReAd (ACeTyLene)13-420 3/16" 9/16-18 613-422 5/16" 9/16-18 613-423 3/8" 9/16-18 6

deLIVeRS exTRA PROTeCTIOn!


Twin Welding Hose Assembly

(Oxygen-Acetylene Hose)

Grade R (Rubber) twin line for gas welding and cutting torches. EPDM tube, multi-spiral reinforcement, EPDM cover. Oper-ating temperature: -40°F to 212°F. Made in U.S.A. Brass swivel fittings crimped at each end with 1" long ferrule. Size: 1/4" ID x 50 ft. Pkg: 1 ROLL. Part no. 21-299

Pencil Flame Torch

Traditional medium duty propane torch for general purpose work. Tip produces a concentrated flame for detail work. It can solder up to 3/4 OD copper tubing and silver braze 1/4" diameter copper tubing. Generates 4900 BTUs per hour. Made in the U.S.A. Part no. 31-018

Solder & Flux

Acid Soldering Paste FluxUse with solid wire solder for lead-free plumbing (non-electrical) repairs.Part no. 21-325

40/60 Resin Core Solder For most electrical applications. 40% Tin, 60% Lead. Melting point: 460°F. Diameter: .093" (3/32"). 1 lb. spools. Part no. 21-303

40/60 Acid Core SolderFor radiators, plumbing, and sheet metal repairs. 40% Tin, 60% Lead. Melting point: 461°F. Diameter: .093" (3/32"). 1 lb. spools. Part no. 21-304

50/50 Solid Wire SolderUsed extensively in plumbing work and with crafts. 50% Tin, 50% Lead. Melting point: 421°F. Diameter: .125" (1/8"). 1 lb. spools. Part no. 21-305

"economy Series" SolderA commercial grade designed for the occasional solder user. 1/8" diameter, 1 lb. spools.

21-306 Resin Core Solder21-307 Acid Core Solder21-308 Solid Wire Solder

"Kwik-draw" 60/40 Resin Core Solder A strong, low-temperature solder. Use for all electrical applications. 60% Tin, 40% Lead. Melting point: 360°F. Diameter: .050" (3/64"). Size: 1.3 oz. Pkg: 6 tubes. Part no. 21-309


AIRCO/COnCOA STyLe

Torch Cutting Tips

VICTOR STyLe

SMITH STyLe

HARRIS STyLe

PUROx/LInde/L-TeC STyLe

OxWeLd/LInde/L-TeC STyLe

Cutting tip sizes and brands not shown also available on special request. We can also supply cutting

attachments, torch handles, welding heads, heating nozzles, cylinder regulators and complete cutting outfits.

Manufacturer Mfr'sPart No.

Size Our Part

NumberAirco/Concoa 144-00 00 943Airco/Concoa 144-0 0 978Airco/Concoa 144-1 1 979Airco/Concoa 144-2 2 944Airco/Concoa 144-3 3 945Airco/Concoa 164-00 00 946Airco/Concoa 164-0 0 980Airco/Concoa 164-1 1 981Airco/Concoa 164-2 2 947Airco/Concoa 164-3 3 948

Victor 1-101-00 00 950Victor 1-101-0 0 982Victor 1-101-1 1 983Victor 1-101-2 2 951Victor 3-101-00 00 952Victor 3-101-0 0 984Victor 3-101-1 1 985Victor 3-101-2 2 953Smith SC12-00 00 954Smith SC12-0 0 986Smith SC12-1 1 987Smith SC12-2 2 955Smith SC12-3 3 956Smith SC12-4 4 957Smith SC12-5 5 958Smith SC12-6 6 959

Manufacturer Mfr'sPart No.

Size Our Part

NumberHarris 6290-00 00 960Harris 6290-0 0 988Harris 6290-1 1 989Harris 6290-2 2 961Harris 6290-3 3 962Harris 6290-4 4 963

Purox/Linde 4202-3 3 991Purox/Linde 4202-4 4 964Purox/Linde 4202-5 5 965

Oxweld/Linde 1502-2 2 966Oxweld/Linde 1502-3 3 992Oxweld/Linde 1502-4 4 967


Tool steel cutter

Restores pitted and slag-damaged torch tips to new tip performance without removing from the torch. Just place the nylon tapered sleeve over the tip and give the cutter a few turns. Part no. 21-357

Torch Tip Refacing Tool

Copper coated stem for spatter resistance.

Part no. Size Model10-669 4" 40410-670 6" 40610-671 8" 40810-672 10" 41010-673 12" 412

drop Forged “C” Clamps

Fits fuel and oxygen valves with a 9/32" stem. Part no. 21-485

T-Handle Tank Wrench

3-Flint Spark Lighter

3 large flints provide up to 6,000 ignitions. Rotatable file allows for continuous fresh surface. Sturdy hand grip frame. Part no. 21-326

EXTRA FLINTS FOR ABOVE Part No. 21-326R (Pkg. 5 ea)

Welding Accessories

STAndARd SPARK LIGHTeR

Large hood traps more gas. Provides up to 1,500 igni-tions. Part no. 21-327

EXTRA FLINTS FOR ABOVEPart No. 21-327R (Pkg. 5 ea)

Tip drill Kit

Properly cleans cutting and welding tips. Pencil size aluminum holder stores drill assortment in barrel. Contains 12 assorted wire sized drills. Part no. 21-329

Torch Tip Cleaner

13 assorted files replace drill sizes #49 thru #77. In fold-up holder. Part no. 21-330


Sleek, sporty style, Soft touch temples, Lightweight construction. Single lens wrap-around protectionIncludes free neck cordPart no. PW25676

Smoke Mirror Lens

Welding Accessories

We carry the most popular welding and primary cable sizes in convenient pre-cut lengths of 50’ and 100’. These lengths are attractively boxed and ready to go right off the shelf for clean and trouble free cable sales. Flex-a-prene 600 volt all-weather grade welding cable is rated at -50ºC to +105ºC giving it outstanding cold weather flexibility. Made with a special jacketing compound, this standard stock welding cable gives you high flexibility without sacrificing weather resistance. A combination that means better performance at any location. And when you add enhanced dielectric strength to its list of properties, it's no wonder we invite you to compare Flex-a-prene 30 AWG 600 volt welding cable to any other.Meets or exceeds ASTMB-172

Part AWG nOMno. Size O.d.26-473 4 .348"26-474 2 .42"26-475 1 .503"26-476 1/0 .533"26-477 2/0 .586"26-478 3/0 .625"26-479 4/0 .72"

Welding Cable

Weld Chipping HammersA quality weld cleaning tool features Flex-O-Steel handle and safety pinned head. Cone and chisel head style. Part no. 21-328

Green Filters: Wide choice of shades. Hardened glass.

Gold Coated Filters: reflection coating for much cooler welding, better UV protection, and less weight. Made from lightweight polycarbonate.

Clear Glass Cover; an outer cover plate to helps pre-vents pitting of filters - prevents distortion. Hardened glass.

Clear Liner; an inner safety cover plate that helps protect eyes from impact of shattered glass lenses. Made from cast plastic. May also be used as an outer cover plate for less weight.

Part no. Shade Type Pkg2" x 4¼" FILTeRS21-342 5 Green Glass 621-343 10 Green Glass 6 21-344 12 Green Glass 621-345 5 Gold Polycarbonate 1 21-346 10 Gold Polycarbonate 1 21-347 12 Gold Polycarbonate 1 2" x 4¼" SAFeTy PLATeS21-348 Clear Glass Cover Plate 2521-349 Clear. Plastic Inner Liner 254½" x 5¼" FILTeRS21-358 10 Green Glass 6 21-359 12 Green Glass 621-360 10 Gold Polycarbonate 1 21-361 12 Gold Polycarbonate 1 4½" x 5¼" SAFeTy PLATeS21-362 Clear Glass Cover Plate 621-363 Clear Plastic Inner Liner 6

Welding Filters

elastic Sweat Bands

Thick, open cell cellulose sponge with elastic band. Can be positioned anywhere. Length: 8½"

Part no. description Pkg. Qty.21-364 Elastic Sweat Bands 10 each21-364C "Case of 100" 1 Case


Welding Accessories

Part Window Windowno. Style Size Color21-333 Fixed-Front 4½ "x 5¼" Black21-334 Fixed-Front 4½ "x 5¼" Blue21-335 Fixed-Front 4½ "x 5¼" Red21-336 Fixed-Front 4½ "x 5¼" Silver21-337* Lift-Front 2" x 4¼" Black

*Not pictured. Lift-Front Shadow Helmet has ahorizontally placed window.

Lightweight - only 13 ounces. Streamlined shell for work in tight places Space-age copolymer material withstands heavy impact, extreme heat, and provides better insulation for cooler wear. Balanced for easy nod down. Extended throat and neck protection against sparks, slag and fumes. Available in four colors. Adjust-O-Lok headgear and shade 10 filter plate installed and ready to go! Not recommended for overhead welding. Bifocal wearers will appreciate the large vertically placed 4½" x 5¼ window model.

Welding Helmets

Recommended for gas welding and cutting only. Flex-ible plastic frame hugs facial contour for comfortable fit. Ventilated. Durable elastic head band. Size: 2" x 4¼" lift front with shade 5 filter. Made in U.S.A. Part no. 21-339

Warning: These goggles provide limited face and eye protection. Goggles and lenses are not unbreakable. Do not use for arc welding.

JACKSOn AdjustolokTM Welding Helmet Headgear

Replaces headgear found on all Jackson brand welding helmets. Soft vinyl forehead cushion. Adjustolok features size adjustment without helmet removal. Made of molded nylon. Made in U.S.A. Part no. 21-338

AUTO dARKInG Welding Helmets

Auto-Darkening technology is here! EQC FILTERS (electronic quick-change) with a switch time of 1/25000 of a second, viewing area of 1-1/15" x 3-3/4" , "on" switch with energy-saving "auto-off" feature (shuts down when helmet is not in use), IR/UV protection at all times, patented Adjustolok® headgear, one year warranty. Color is black. Made in U.S.A.Part no. description29-470 Helmet with preset filter (shade 10)29-472 Helmet with variable filter (8.5 to 12.5)

Lift-Front Welding Goggles

SAFeTy GOGGLeS

Conforms to OSHA. Molds to contour of face, protecting eyes from dust, spray and flying particles while sanding, cutting wood, grinding and painting. Impact resistant lens. May be worn over eyeglasses. Part no. 10-486


Safety ProductsEconomy Safety Spectacles

An affordable alternative for providing comfort, protection and style that now features fully-adjustable, five-position ratchet-action temples. Features a stylish wrap-around design and one-piece polycarbonate lens with integral sideshields. The lightweight frame provides added comfort and balance. Filters out 99.9 percent of UV radiation. Available in three frame colors and three lens tint options. Pkg - 12 ea.

*Grey tinted lens for protection against sun and glare only, not for welding.

economy Spectacles

Large 58mm clear lens. Pkg: 12. Part no. 21-340

Green lens also available

Clear Visitors Spectacles

This clear, uncoated, wrap-around visitor spec is an economical way to demonstrate a commitment to safety for visitors. 100% polycarbonate lens for light impact protection Wear over regular prescription glasses.

Part no. 21-341

Clear Lens #10-694

Grey Lens* #10-695

Cotten Twill Winter Liners

Universal size with extra long nape to protect the back of your neck. Outer shell is tightly woven wind resistant twill. Inner lining is flame resistant flannel like material which very warm and comfortable. Velcro closure on chin strap. Completely dielectric. Part no. 21-368

Metal Markers

Flat SoapstoneMarks steels and other alloys where other markers fail. Size: 1/2"W X 3/16"T X 5"L Part no. Qty21-483 Flat 1 Ctn (144 pcs)21-493 Round 1 Ctn (144 pcs)

Valve-Action Paint MarkerValve-action releases paint as needed. Felt tip makes long-lasting, bold marks on all surfaces -- metal, glass, wood, rubber, paper, cardboard, styrofoam, and fiber-glass. Compact size fits in shirt pocket. Durable metal barrel. Lead-free, fade resistant paint. Complete as-sortment of colors in stock. Temperature range: -50°F to 150°F. Dries in 3 minutes. Markal brand.

Part no. Color Pkg10-727 White 1210-728 Yellow 1210-737 Red 1210-738 Black 1210-739 Orange 1210-740 Dark Blue 1210-741 Green 1210-743 Aluminum 1210-744 Light Blue 12

Soapstone Holders Use for marking and outlining weld areas on steel. In-dexable/retractable holder comes with flat soapstone. 5 per boxPart no. Qty21-484 Flat 1 Box21-399 Round 1 Box


Face Shield Visors with universal hole pattern to fits most headgear brands. Used for face and eye pro-tection against light impact such as small particles and dusts, direct splash from non-hazardous liquids*. Headgear sold separately.

Part no. Type Application21-286 Clear General protection21-287 Green Tinted Sun & glare protection21-288 Shade 5 Gas welding/cutting

Ratcheting Face Shield Headgear Flexible and comfortable. Soft padded headband. Ratcheting ad-justment allows size to be changed while worn. visor sold separately. Part no. 21-289

Safety ProductsFace Shield Visor and Headgear

economy Hearing Protectors

NRR 20dB Foam filled ear cushions Sliding adjustable headband Lightweight May be worn over-the-head, behind-the-head and under-the-chin. Made in USA. Part no. 29-414

Bump Caps

Bump caps protect workers from hazards that can inflict painful bumps and lacerations. Do not use to protect against falling objects. Adjustable suspen-sion. Not ANSI approved.

Part Pkg.no. Color Qty.21-293 Orange 121-294 White 121-295 Yellow 1

Safety Hard Hats

Protect workers from falling objects and hazards that can inflict painful bumps and lacerations. Sides are slotted for use with face shields, welding helmets and hearing protectors equipped with mounting blades. Constructed of durable, lightweight dielectric plastic with impact absorbing design. A soft, foam forehead cushion included. Ratcheting suspension. Complies with ANSI z89.1 standards. Made in U.S.A.Part Pkg.no. Color Qty.21-296 White 121-297 Orange 121-298 Yellow 1Also available: green, red, blue, gray, black & safety orange.

Moldex® disposable Foam earplugs

Smooth, comfortable, tapered for easy insertion in ear canal. Hygienically packaged in biodegradable paper pouches. Brightly colored for compliance checks. Rated NRR 31. Made in U.S.A.

Part no. Size Unit29-401 200 pair uncorded 1 pkg29-400 100 pair corded 1 pkg29-399 250 count Dispenser 1 pkg

CORDED

UNCORDED

250 COUNT DISPENSER(UNCORDED)


Safety Products

NO METAL BAND!Use against particulate aerosols free of oil*. Exhale valve lets workers breath easier and stay cooler. Durable molded poly-mesh shell resists collapsing in heat and humidity. Molded nose bridge maintains seal for a comfortable fit. Two straps in back for comfortable, secure fit. Meets OSHA guidelines for use up to 10 x PEL (permissible exposure level), NIOSH 42CFR84 N95, TC-21C-350 approvals. Part no. 23-319Pkg: 10 each Sold in full packages only.

WARNING: DO NOT USE AGAINST fumes, gases, vapors, asbes-tos, silica (sand blasting), graindust, spray paints or other harmful substances. This mask will not protect your lungs.

MOLdex® 2300Particulate Respirator

WITH EXHALE VALVE

Dependable protection against dust and mists with a PEL (permissible exposure level) not less than .05 mg/m3. Use for dusts from insulation, process-ing minerals, coal, lead, iron ore, cotton, flour and certain other substances. Use to protect against mists from sprays that do not produce harmful va-pors (such as latex paints). Use when sanding cured paints, body fillers, fiberglass and woods. Two straps in back for comfortable, secure fit. NIOSH 42CFR84 N95 approval. Part no. 21-365Pkg: 20 each Sold in full packages only.

WARNING: Not for use against fumes, gases, vapors, asbestos, silica, grain dust, spray paints or other harmful substances. This mask will not protect your lungs.

MOLdex dust Respirators

disposable Protective Coveralls

Part no. Size Pkg29-484 L. 25 ea29-486 XL 25 ea29-488 2XL 25 ea29-490 4XL 25 ea

SPUn-BOnded POLyPROPyLene COVeRALLS

ECONOMICAL AND TOUGH 1½ Oz. SPUN-BONDED POLYPROPYLENE. This extra heavy fabric is not only durable, it's washable too! Protects clothing from dust, dirt, oil, grease and paint. Great for common dirty chores, heavy equipment repairs, sand blasting operations and roadside emergencies. Fabric weight: 1½ oz/sq. yd. Zippered front. Color is white (also available in blue as special order). Not Tyvek® brand. Provides limited splash protection. Not recommended for continuous liquid exposure. Not for use in hazardous applications. Keep

away from extreme heat. Made in U.S.A.

Part no. Size Pkg29-492 L 25 ea29-494 XL 25 ea29-496 2XL 25 ea

SPUn-BOnded OLeFIn HOOded COVeRALLS

SPUN-BONDED OLEFINTM FABRIC PRO-VIDES AN EXCELLENT BARRIER AGAINST DRY PARTICULATES AND NONHAzARD-OUS LIQUIDS. Soft, spun-bonded olefin nonwoven fabric is pressure bonded to protect clothing from water, dust, dirt, oil, grease, paint and other nonhardous liquids. Great for power washing, plumb-ing, painting, dirty chores, equipment repairs and roadside emergencies. Fabric weight: 1.19 oz/sq. yd. Zippered front. Elastic around hood , wrists and ankles helps keep you dry. Color is white (also available in blue as special order). Provides limited splash protection. Not recommended for continuous liquid exposure. Not for use with hazardous liquids. Keep away from extreme heat.

Made in U.S.A.


(Glove Liners)These inexpensive knit gloves are comfortable and easy to wear throughout a long work-day. Provides good air circulation, reduces moisture build-up. Me-dium weight white cotton string, knit wrists. Men's size. Made in U.S.A.

Part no. Pkg21-277 12 pr

100% Cotton String Gloves

These gloves ensure a firm hold on slippery objects. Medium weight white cotton string, knit wrists. Blue vinyl dots. Men's size. Made in U.S.A.


Cotton Grip Style GlovesWork Gloves

Unlined100% cotton jerseys are excellent for maintenance and clean-up. Knit wrists. Clute pattern. Men's size. Color is brown. Import.


Jersey Gloves

Red linedFleece lining provides an added degree of comfort and warmth. Driver's style with slip-on cuffs. 100% cotton. Gunn pattern. Men's size. Import.


Ambidextrous, lightly powdered. 100 gloves per dis-penser package. Imported. Not for medical use.

Part no. Size Unit23-400 Small 1 pkg23-401 Medium 1 pkg23-402 Large 1 pkg23-403 Extra-Large 1 pkg

Ambidextrous, powder free. 100 gloves per dispenser package. Imported. Not for medical use.

Part no. Size Unit23-406 Large 1 pkg23-407 Extra-Large 1 pkg

disposable Latex Gloves

Blue nitrile Gloves

neoprene Liquid Proof Gloves

Neoprene coated liquid proof glove provides best pro-tection of all the coatings available. Protects against abrasion and chemicals. Unaffected by oil, acids, caustics, alcohols, detergents and most solvents. The 18" size protects up to the elbow. The 31" size protects entire arm, up to the shoulder. Cotton lined for added comfort and easy removal. Ozone resistant. Black, smooth finish. USDA accepted. Men's size. Made in U.S.A.

Part no. Length Cuff Pkg21-266 12" Gauntlet 1221-267 14" Gauntlet 1221-268 18" (elbow) Gauntlet 621-269 31" (shoulder) Gauntlet 6


All welder's gloves shown are, 14" overall length, one-piece back, seams and fingertips are fully welted to prevent burn-through. Men's size large. Made in U.S.A. economy— for light-duty welding. Shoulder split leath-er. deluxe— fully heat resistant for professional weld-ers. Flexible side-split leather. Aluminized— same as deluxe welding gloves, except one-piece aluminized back and wool lined. Resists heat and UV radiation.

Part no. Style Color Lining Pkg21-279 Deluxe Rust Acrylic 6 pr21-280 Aluminized Rust Wool 1 pr

Leather Welder's Gloves

Select split leather palm, Cotton back, flannel lined, knit wrists. Men's size. Color is blue/gray. Imported.


Leather Palm Work Gloves

Select split leather palm, knuckle strap, finger tips, index finger, wing thumb. Flannel lined palm and thumb. Waterproof safety cuff. Men's size. Color is blue/gray. Imported.


Full leather, select buffed grain pigskin leather won't stiffen when wet. Provides longer wear and better breath-ability than cowhide. Unlined, elastic cuff, welted seams. Made in U.S.A.

Part no. Men's Size Pkg21-270 Medium 12 pr21-271 Large 12 pr21-272 Extra-Large 12 pr

Leather drivers Gloves

Work Gloves& Welding Coats

Welder's Jacket

Jackets are leather clothing is made from split cowhide for maximum durability and heavy duty protection. Designed to allow complete body movement and freedom while welding. All seams are sewn with Kevlar® thread which is double locked stitched to minimize seam burnout. Pkg: 1 each.

Part no. Men's Size Length21-283 Medium 30"21-284 Large 30"21-285 Extra-Large 30"


A

Automatic Wire Stripper 17-2Aviation Snips 17-1

B

BatteryTerminal

Gauge 17-4Bearing Separators 17-2Bits, Insert 17-7Blades

Utility Knife 17-13Bolt Cutters 17-1Bolt Gauges 17-4Bondhus Style Wrenches 17-9

C

Calipers 17-4Can Liners 17-16Cans, Oil 17-18Carton Sealing Tape 17-15Caulking Guns 17-3C-Clamps

Locking 17-6Cobra Pliers 17-2Cutters

Aviation Snips 17-1Bolt 17-1Replacement Wheels 17-2Tubing, Copper 17-2Wire Rope 17-1

D

Drain Pans, Oil 17-18

F

Funnels 17-18

G

Garbage Bags 17-16Gauges

Battery Terminal 17-4Bolt & Nut 17-4Screw Pitch 17-4Wire 17-4

H

Hammer Handles 17-17Handles

Hammer 17-17Hex Key Wrenches 17-9, 17-12

I

Impact Driver 17-1Insert Bit Holder 17-8Insert Bits 17-7, 17-8

K

Knife BladesSingle Edge 17-13Utility 17-13

KnivesPutty 17-14

Utility 17-13

L

Letter Stamp Sets 17-3Liners

Trash Can 17-16Locking Wrenches 17-6Locks, Master 17-14L-Wrenches 17-9

M

Magnetic Screwdriver Set 17-7Marking Tools

Stamps 17-3Masking Tape 17-15Master Pad Locks 17-14Measures, Liquid 17-18Measuring Tools

Battery Terminal 17-4Bolt & Screw Gages 17-4Pocket Slide Calipers 17-4Screw Pitch Gages 17-4Tape Measure 17-3

MetricBolt & Nut Gauge 17-4

N

Number Stamps 17-3Nutsetter, Magnetic 17-8

O

Oil Drain Pan 17-18

P

Pad Locks 17-14Paper Shop Towels 17-16Pipe

Wrenches 17-1Pliers

Cobra 17-2Vise Grip 17-5

Putty Knives 17-14

R

Razor Blades & Scraper 17-13Recovery Drain Pan 17-18Rules 17-3

S

ScraperPutty Knife 17-14Razor Blade 17-13

Screwdriver Bits 17-7Screwdriver Set, Magnetic 17-7Screwdriver Set, Security Bit 17-7Screw Gauges 17-4Sealing Tape 17-15Shims

Shim Stock 17-16Shop Towels, Paper 17-16Sledge Hammer Handles 17-17Stamps, Letter/Figure 17-3Strapping

Tape (Filament) 17-15

T

TapeCarton Sealing 17-15Masking 17-15Measures 17-3Paper 17-15Sealing 17-15Strapping (Filament) 17-15

Technical DataTorx Driver Size Guide 17-7

Thread Pitch Gages 17-4Tools

Aviation Snips 17-1Ball End L-Wrench Sets 17-9Bearing Separator 17-2Bolt Cutters 17-1Caulking Guns 17-3Cobra Pliers 17-2Fold-Up Hex Key Set 17-12Hammer Handles 17-17Hex Key Wrenches 17-9, 17-12Impact Driver 17-1Insert Bits 17-7, 17-8Locking Pliers 17-5Locking Wrenches 17-6Magnetic Insert Bit Holder 17-8Magnetic Power Nutsetters 17-8Marking Stamps 17-3Pipe Wrenches 17-1Pitch Gages 17-4Pocket Slide Caliper 17-4Power Bits 17-7Screwdrivers 17-7, 17-9Security Bit Kit 17-7Tape Measures 17-3T-Handle Hex Wrench 17-11, 17-12Tubing Cutter 17-2Vise Grip 17-5

Torx Insert Bits 17-7Towels, Paper Shop 17-16Tractor Funnel 17-18Trash Can Liners 17-16Tubing

CuttersMetal 17-2

U

Utility Blades 17-13Utility Knives 17-13

V

Vise-Grips 17-5

W

WrenchesBondhus Style 17-9Hex Key 17-9, 17-12Pipe 17-1Vise-Grip 17-5

Section 10 Tools & Shop Supplies


Ridge Tool's Center-Cut Bolt Cutters make quick and easy cuts on rod, wire mesh, concrete form ties, cable and bolts. Cam/bolt mechanism allows easy adjustment. Made in U.S.A. PART nUMBeR Max. Capacity Bolt Repl. HeadSize @31RC† @42RC‡ Cutter Assembly14" 1/4" 3/16" 21-237 21-237RH18" 5/16" 1/4" 21-238 21-238RH24" 3/8" 5/16" 21-241 21-241RH30" 1/2" 3/8" 21-243 21-243RH36" 9/16" 7/16" 21-245 21-245RH42" 5/8" 1/2" 21-247 21-247RH†Iron and steel wire, proof coil chain, grade 5 bolts‡Stainless steel, high-test chain, spring wire, heat-treated rod, alloy bolts, reinforcing rod.

Bolt Cutters

Each tool is work tested to assure the consistent qual-ity you expect from Ridgid®. Handle is sturdy I-beam construction with comfortable contoured grip. Lifetime handle guarantee*. Replacement jaws available. Made in U.S.A.

PART nUMBeR Cast Iron AluminumSize Handle Handle6" 21-249 -8" 21-250 -10" 21-251 21-25712" 21-252 -14" 21-253 21-25818" 21-254 21-25924" 21-255 21-26036" 21-256 21-261

*Guarantee applies to handles only.

Aviation Snips

Cut up to 18 gauge (.049") sheet metal Color-coded vinyl grips. Length: 9¾". Made in U.S.A. Part direction Gripno. of Cut Color10-733 Left Red10-734 Right Green10-735 Straight Yellow10-736...................3 Piece Set (one each of above)

Straight Pipe Wrench with Cast Iron Handle

Straight Pipe Wrench with 40% LighterAluminum Handle

Cuts steel and stainless steel wire rope, aircraft cable, copper and aluminum wire, and iron rod. Sharp hardened precision cutting edges. Overall length: 7½". Plastic coated handles. Cutting capacity: wire and cable to 1/4", steel rod - 3/16". Made in Germany. Part no. 10-395

Wire Rope Cutter

Pipe Wrenches

Impact driver

Loosens Rusted, Frozen Nuts, Bolts and Screws. Unique design delivers over 200 ft. lbs. of “Shock Torque.” Can be reversed to tighten. Can also be used with impact sockets. Includes: 3/8" sq. drive with 3/8" drive bit holder; #1, #2, #3, #4 Phillips, and 3/8" straight slot bits. Part no. 10-649


Push button jaw release allows rapid single-handed adjustments! No need to open pliers to adjust the size! Selected opening is positively locked in place. Unique jaw design shaped to prevent nut-burring. Self-gripping jaws produce an iron grip on pipes, bolts & nuts. Extra thin jaws for easy access into tight work areas. Cushion grip handles. Lifetime guaranteed! Made in Germany.

CobraTM Locking Pliers

Part CAPACITyno. Length W.A.F. Pipe O.d.23-300 7" 3/8"-1-1/8" 1/8"-1"23-301 10" 3/8"-1-1/2" 1/8"-1-1/4"23-302 12" 3/8"-1-7/8" 1/8"-1-1/2"23-303 16" 3/8"-2-3/4" 1/8"-2-1/2"23-309 3-peice set: contains 7", 10" & 12" pliers

Operates with one-handed downward pressure!

Push-button jaw release!

Weather Pack Terminal Crimper(Open Barrel Terminal Crimper)

Duplicates factory crimp on Weather Pack and many other noninsulated OEM terminals. Tool has five crimp-ing stations for 14 to 24 gauge open barrel terminals. Insulated grips. Part no. 02-487

Automatic Wire Stripper

The fastest way to strip wire. Grips and strips wire with a single squeeze. Self-adjusts automatically from 12 to 26 gauge wire. Use on solid or stranded wire. Built-in wire cutter and crimper, alloy steel jaws, insulated plastic handles. 90-day warranty against defects in material. Import. Part no. 23-306Bearing Separator

Threaded holes are 5/8-18. May be used with puller no. 10-611. For removing generator gears, bearing cones, bearings, and other parts that puller jaws cannot reach, knife edges are flush. Capacity: 0" to 4-1/4"Part no. 10-608

MIdGeT TUBInG CUTTeR for hard to get at places. Needs only 1-1/4" clear-ance. Capacity: 1/8" thru 5/8"Part no. 10-444

LARGe TUBInG CUTTeR includes two steel cutter wheels (one stored in knob) and a retractable reamer. Capacity: 1/8" - 1-1/8". Part no. 10-463

RePLACeMenT CUTTeR WHeeLS One size fits all the above tubing cut-ters. Part no. 10-490

Tubing Cutters

Heavy duty Tubing Bender

Bends 3/16, 1/4, 5/16, and 3/8" diameter copper and soft steel tubing. Makes tight bends without collapsing tubing. Roller adapters included for each tubing size. Place tubing between adapter and studs. Squeeze handles to bend. Part no. 10-663


LeTTeR SeTS in Wooden BoxEach letter set is packaged in its own solid wooden box. Lid doubles as a holder for composition. Letter sets consist of 27 stamps; letters A through z and a period.

Part Characterno. Height10-651 3/32"10-653 1/8"10-655 3/16"

FIGURe SeTS in Wooden BoxEach figure set is packaged in a solid wooden box. Figure sets consists of 9 stamps; 0 through 8, the 6 also being used for the 9.

Part Characterno. Height10-650 3/32"10-652 1/8"10-656 1/4"

Marking Tools(Steel Hammer Stamps)

Standard Caulking GunFor use light to medium consistency caulks and seal-ants. Features standard ratchet rod and spout cutter. For 10-12 oz. cartridges. Import. Part no. 21-301

Heavy duty Caulking GunSkeleton frame caulking gun delivers 3 times more thrusting power than standard guns. Easily dispenses stiff caulks and sealants. Features seal puncture tool, spout cutter, heavy duty hex piston rod, quick pressure "thumb" release for fast shut-off. Ladder hook, E-z load front cap and cartridge retainer spring. For 10-12 oz. cartridges. Import. Part no. 21-302

Caulking Guns

ACTUAL CHARACTeR HeIGHT

Tape Measures

Popular brand. High impact plastic case fits comfort-ably in your hand. All blade returns cushioned by shock absorber. Cam activated lock prevents blade from slipping back. Hi-Vis yellow spring steel blade is easy to read. Steel pocket clip. The 25 foot rules have a 3" base for easy inside measurements. Made in U.S.A..

Part no. Size Pkg21-350 1/2 x 12' 621-351 3/4 x 12' 621-352 3/4 x 25' 621-353 1" x 25' 6


Pocket Slide CaliperA handy pocket slide caliper now made entirely of stainless steel with both inside and outside reading of measurements. The rule has easy reading graduations in 16ths and 32nds. For mechanics, servicemen, hobby-crafters, anyone who must occasionally measure small objects such as nails, screws, buttons, lenses, tubing, etc. Has a handy decimal equivalents table on back. Made of stainless steel.

FRACTIOnALReadings up to 5" in 16ths and 32nds.Part no. 10-479

FRACTIOnAL & MeTRICReadings up to 5" in 16ths and millimeters.Part no. 10-480

Screw Gauges & Thread Pitch GaugesMetric Bolt & nut Gauge

Just push the bolts through the holes to find diameter. Measures hex head of bolts for wrench size and/or diameter of fastener. Thread pitch gauge quickly mea-sures five thread pitches. Part no. 42-003

Metal Screw Pitch Gauges

LARGe U.S. STAndARd PITCHMeasures pitch sizes from 4 to 84, including 11-1/2 and 27 pipe thread. 51 pitches. Gauges V, American National and U.S.S. 60° threads. Part no. 10-472

SMALL U.S. STAndARd PITCHMeasures pitch sizes from 9 to 40, including 11-1/2 and 27 pipe thread. 22 pitches. Gauges V, American National and U.S.S. 60° threads. Part no. 10-473

MeTRIC PITCH GAUGeMeasures pitch sizes from .25 to 6mm. 24 pitches. Part no. 7070

U.S. Standard Bolt & nut Gauge

Easiest to use... shirt-pocket size! Just push the bolts through the holes to find diameter. Measures regular and countersunk heads. Nuts drop on plugs along top edge of Gauge. NF nuts fit to base of plugs, NC nuts fit half-way. Part no. 42-000

Combination Inch & Metric Screw Gauge

To use, hold small screws at an angle in slots to find diameter. Measures regular and countersunk heads.Part no. 42-002

Copper Wire/Battery Terminal Gauge

Determines the correct size of copper wire from 10 to 4/0 gauge. Simply insert bare wire into the "V" section of the tool to identify what gauge wire it is. This sturdy plastic tool includes a feature for identifying the correct wire size of battery terminal compression nuts. Part no. 42-001


CURVed JAWFor better contact on bolt heads, nuts, and round stock. Jaw Vise-GripPart no. Length Opening no.10-642 7" 1-5/8" 7CR10-627 10" 1-7/8" 10CR

STRAIGHT JAW

Jaw Vise-GripPart no. Length Opening no.10-643 7" 1-1/8" 7R10-628 10" 1-1/2" 10R

CURVed JAW W/WIRe CUTTeR Jaw Vise-GripPart no. Length Opening no.10-638 5" 1-1/4" 5WR10-644 7" 1-5/8" 7WR10-629 10" 1-7/8" 10WR

STRAIGHT nOSe jaws reach into tight spots where other tools can't.

Jaw Vise-GripPart no. Length Opening no.10-639 6" 2-1/4" 6LN

Locking Pliers Long nose Locking Pliers

with Wire Cutter

BenT nOSeProvides off-angle access to tight places.

Jaw Vise-GripPart no. Length Opening no.10-674 6" 2-1/4" 6BN

Large Jaw Locking Clamp

Especially use for those who work with large objects like exhaust system and oil filters. Jaw Vise-GripPart no. Length Opening no.10-646 12" 3-1/8" 12LC


Perfect for welding and body repair shops. Available with self-leveling swiveling pads or regular tips. Locks to work with hand squeeze. Vise-Part Throat Gripno. Length Height depth no.SWIVEL PADS10-641 6" 2" 2" 6SP10-631 11" 3-3/4 2-5/8 11SP10-633 18" 4" 10" 18SPREGULAR TIP10-640 6" 2" 2" 6R10-630 11" 3-3/4 2-5/8 11R10-632 18" 4" 10" 18R

Locking C-Clamp

Locking Wrench

This 16-IN-1 locking wrench locks on to three flat sides of hex fasteners, allowing for tremendous force to be applied without marring or slipping off the fastener. Each locking wrench adjusts to 16 different standard and metric sizes. Equipped with wire cutter.

SWIVEL PADS

REGULAR TIP

Part Chain Vise-no. Length Grip no.10-634 19" 20R

Locks to work with powerful grip for smooth and ac-curate bending and seaming. Micro-adjusting screw and easy release trigger.

Locking Chain Pipe Clamp

Locking Sheet Metal Tool

Part Chain Jaw Vise-no. Length Width Grip no.10-645 8" 3-1/8" 8R

Holds and locks around any size or shape - anything the chain can be wrapped around. Adjusts to ratchet action in either direction. Won't slip, won't crush thin-walled pipe.


TORx dRIVeR SIZe GUIdeTorx point size fits these fasteners

TORx FOR USe WITH THeSe TORx SCReW SIZeSPOInT Pan Flat 100° Button Socket SetSIZe Hd. Hd. Flat Hd. Hd. Hd. ScrewT10 ............. 6 ................. 6 .................... 6 .................... 5,6 ...............4,5 ................. -T15 ............. 8 ................. 8 .................... 8 .................... 8 ..................6 .................... -T20 ............. 10 ............... 10 .................. 10 .................. - ...................- .................... 1/4T25 ............. 12 ............... 12 .................. - ..................... 10 ................8 .................... -T30 ............. 1/4 .............. -..................... 1/4 ................. - ...................1/4 ................. 3/8T40 ............. 5/16 ............ 5/16,3/8 ......... 5/16 ............... 5/16 .............- .................... 7/16T45 ............. 3/8 .............. -..................... 3/8 ................. 3/8 ...............5/16 ............... 1/2T50 ............. 7/16 ............ 7/16,1/2 ......... - ..................... - ...................3/8 ................. 9/16

"A"dIM.

"A"dIM.

Power BitsHeat treated tool steel. For use in drill chucks and "quick-release" chuck adapters.

PHILLIPS1/4" Hex SHAnK, 2-3/4" LOnG

Pkg: 10 each Part Point Body Apex*no. Size dia. no.6765 1 3/16 491-A6766 2 1/4 492-A6767 3 5/16 493-A

exTenSIOn BITS, 1/4" Hex SHAnK, 6" LOnGPkg: 10 each

6768 2 1/4 492-C

TORx1/4" Hex SHAnK, 1-15/16" LOnG

Pkg: 10 each Part Point "A" Apex*no. Size dim. no.6783 T27 .195" TX27-36784 T30 .216" TX30-36785 T40 .260" TX40-3

Insert BitsHeat treated tool steel. For use with magnetic bit holder (6767A) in drill chuck, cordless screwdrivers, or square drive magnetic hex bit holders.

PHILLIPS1/4" Hex SHAnK, 1" LOnG

Pkg: 10 each Part Point Apex*no. Size no.6723 1 440-16724 2 440-26725 3 440-3

HeAVy dUTy PHILLIPS5/16" Hex SHAnK, 1-1/4" LOnG, HeAT-TReATed

Designed for use with Impact Drivers. Pkg: 10 each

Part Pointno. Size*6786 26787 3

TORx1/4" Hex SHAnK, 1" LOnG

Pkg: 10 each Part Point "A" Apex*no. Size dim. no.6716 T10 .107" TX10-16717 T15 .128" TX15-16718 T20 .151" TX20-16719 T25 .173" TX25-16720 T27 .195" TX27-16720A T30 .216" TX30-16721 T40 .260" TX40-1

31 pc Screwdriver Bit Kit

Includes magnetic screwdriver with storage in handle, bit holder, 8) torx bits, 4) phillips bits, 5 hex socket bits, 5) slotted bits, 4) square recess bits, 2) clutch bits and storage case. Part no. 6782

Includes magnetic screwdriver with storage in handle, bit holder, 1/4" socket adapter, 10) security torx bits, 2) security phillips bits, 8) security hex socket bits, 4) security spanner bits, 2) square recess bits, 1) .250" slotted bit, 1) #1 phillips bit, storage case. Part no. 6781

31 pc Security Bit Kit


Insert Bit

MagneticInsert Bit HolderScrew

Insert Bits (cont'd)Heat treated tool steel. For use with magnetic bit holder (6767A) in drill chuck, cordless screwdrivers, or square drive magnetic hex bit holders.

SLOTTed1/4" Hex SHAnK, 1" LOnG

Pkg: 10 each BladePart Screw Blade Thickno. Size* Width -ness6732 4F-5R .156" .032"6734 8F-10R .250" .042"6735 10F-12R .281" .046"6736 12F-14R .281" .050"6737 14F-16R .281" .055"

HeAVy dUTy SLOTTed**5/16" Hex SHAnK, 1-1/2" LOnG

Note: This item is not heat-treated. Pkg - 10 each

6789 8F-10R .250" .042"6790 12F-14R .313" .050"

* F - flat head; R - round head **Do not use with Impact Drivers.

SQUARe ReCeSS BITS1/4" Hex SHAnK, 1" LOnGPkg: 10 each

Part Point Screwno. Size Sizes6797 0 3, 46798 1 5, 6, 76799 2 8, 106800 3 12, 1/4

exTenSIOn BITS, 1/4" Hex SHAnK, 6" LOnGPkg: 10 each

6768 2 8, 10

Hex BITS1/4" Hex SHAnK, 1-1/4" LOnGFor Socket Screws. Pkg: 10 each

Part BIT SCReW SIZeno. SIZe Cap Set6791 3/32 4-5 106792 1/8 - 1/46793 5/32 10 5/166794 3/16 1/4 3/86795 7/32 - 7/166796 1/4 5/16 1/2

Magnetic Power nutsetters

Magnetic Insert Bit Holder

For use with any style 1/4" hex insert bit. Bits snap securely into holder to hold screw while positioning. Made from stainless steel. Pkg: 10 each

Part Hex Hex O.A.no. Opening Shank Length6767A 1/4" 1/4" 3"Not for use with Power Shank Bits. Available in Female Square Drive for use with Ratcheting Tools.

For Hex Head Self-Drilling and Tapping Screws. Mag-netic to hold screw while positioning. Made of shock resistant tool steel and heat-treated for maximum strength and hardness.

2-9/16" LonG • 1/4" HEX SHAnkHex PkgSize Part no. Qty1/4 6771 105/16 6772 103/8 6773 107/16" 6774 10

6" EXTRA-LonG • 1/4" HEX SHAnkHex PkgSize Part no. Qty1/4 6775 105/16 6776 103/8 6777 10


Ball end L-Wrench SetsInCH SeTS

12 PC. SeT Sizes .050 thru 5/16 Part no. 29-390

7 PC. SeT Sizes 5/64 thru 3/16 Part no. 29-391

MeTRIC SeTS6 PC. SeT Sizes 1.5 thru 5 mm Part no. 29-392

9 PC. SeT Sizes 1.5 thru 10 mm. Part no. 29-393

Ball endL-Wrenches

• Ball end provides convenience of off-axis rotation• Long-arm - provides leverage to attain full torque• Made of heat-treated 8650 alloy steel

Part Hex Pkgno. Size Length Qty

InCH SIZeS29-330 .050 2.80" 1029-331 1/16 3.00" 1029-332 5/64 3.20" 1029-333 3/32 3.40" 1029-334 7/64 3.60" 1029-335 1/8 3.80" 1029-336 9/64 3.90" 1029-337 5/32 4.10" 1029-338 3/16 4.50" 1029-339 7/32 4.90" 1029-340 1/4 5.20" 1029-341 5/16 6.00" 1029-342 3/8 6.80" 1029-343 7/16 7.50" 229-344 1/2 8.30" 229-345 9/16 9.00" 229-346 5/8 9.80" 229-347 3/4 11.30" 1

MeTRIC SIZeS29-348 1.5mm 3.00" 1029-349 2mm 3.20" 1029-350 2.5mm 3.50" 1029-351 3mm 3.90" 1029-352 4mm 4.30" 1029-353 5mm 5.00" 1029-354 6mm 5.90" 1029-355 8mm 6.70" 1029-356 10mm 7.40" 10

1/4" Slotted 3/16" Slotted

1/4" Nut Driver 5/16' Nut Driver

#2 Phillips #1 Phillips

Six for the price of one! Chrome-nickel plated hex tube reverses in handle. Industrial quality heat-treated hex bits. Wide comfortable grip. Part no. 10-690

6-In-1 Screwdriver

2-In-1Pocket Screwdriver

Magnet Top Screwdriver

This pocket size reversible has heat-treated #1 slot-ted and #1 phillips. Overall 5"long. Part no. 10-750

Part no. 10-692

Multi bit Magnet Screwdriver

4-In-1 Screwdriver Part no. 10-693

Part no. 10-691


Part Hex Pkgno. Size Length Qty

SHORT ARM Hex KeyS6821 .028 1.30" 106822 .035 1.30" 106823 .050 1.70" 106824 1/16 1.70" 106825 5/64 2.00" 106826 3/32 2.10" 106827 7/64 2.20" 106828 1/8 2.30" 106829 9/64 2.50" 106830 5/32 2.60" 106831 3/16 2.70" 106832 7/32 3.10" 106833 1/4 3.30" 106834 5/16 3.75" 106835 3/8 4.25" 106836 7/16 4.75" 26837 1/2 5.25" 27015 9/16 5.75" 27016 5/8 6.25" 27017 3/4 7.30" 17018 7/8 8.30" 17019 1" 9.30" 1

LOnG ARM Hex KeyS6838 1/16 3.10" 106839 5/64 3.30" 106840 3/32 3.35" 106841 7/64 3.65" 106842 1/8 3.85" 106843 9/64 4.00" 106844 5/32 4.20" 106845 3/16 4.60" 106846 7/32 5.00" 106847 1/4 5.30" 106848 5/16 6.00" 106849 3/8 6.75" 106850 7/16 7.50" 26851 1/2 8.25" 27020 9/16 9.00" 27021 5/8 9.75" 27022 3/4 11.30" 1 7023 7/8 12.80" 17024 1" 14.30" 1

Hex Key Wrenches Chamfered L-Wrench Sets

• Chamfered ends - clearance between the wrench and screw is usually less than .001" per side for faster socket entry.• Features handy tool holder• Each wrench slips into its own size-marked slot and locks securely in place.• Long-arm - provides leverage to attain full torque.• Compact - fits in your pocket.• Made of heat-treated 8650 alloy steel.• Lifetime guarantee against breakage!

InCH SeTS12 PC. SeT Sizes .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 and 5/16. Part no. 29-409

7 PC. SeT Sizes 5/64, 3/32, 7/64, 1/8, 9/64, 5/32 and 3/16. Part no. 29-410

MeTRIC SeTS6 PC. SeT Sizes 1.5, 2, 2.5, 3, 4 and 5 mm.Part no. 29-411

9 PC. SeT Sizes 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10 mm. Part no. 29-412

22 PC. COMBO PACKINCH sizes .050 thru 3/8" and METRIC sizes 1.5mm thru 10mm. Part no. 29-390


InCH SIZeS

Ball end Straight Hex Pkg (Length) end (Length) Size Qty - 29-363(6") 3/32 5 - 29-364(6") 7/64 5 - 29-365(6") 1/8 5 - 29-366(6") 9/64 529-357(8.5") 29-367(6") 5/32 529-358(9.2") 29-368(6") 3/16 529-359(9.6") 29-369(6") 7/32 529-360(10.1") 29-370(6") 1/4 529-361(10.5") 29-371(6") 5/16 529-362(10.8") 29-372(6") 3/8 5

MeTRIC SIZeS

Ball end Straight Hex Pkg (Length) end (Length) Size Qty - 29-378(4") 2.5mm 5 - 29-379(4.3") 3mm 529-373(7.8") 29-380(6") 4mm 529-374(8.9") 29-381(6") 5mm 529-375(9.5") 29-382(6") 6mm 529-376(10.2") 29-383(6") 8mm 229-377(11") 29-384(6") 10mm 2

Vinyl Grip T-Handle Hex Wrench Sets

• Cushion grip for user comfort.• Size marked for easy identification.• Made of heat-treated 8650 alloy steel.• Handy storage pouch

Vinyl Grip T-Handle Hex Wrenches

ReGULAR Hex endPart No. 29-394 / INCH SIzESIncludes 10 ToolsSizes: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8"

Part No. 29-395 / METRIC SIzESIncludes 5 ToolsSizes: 2.5, 3, 4, 5, 6 mm

BALL end STyLePart No. 29-396 / INCH SIzESIncludes 6 ToolsSizes: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8

Part No. 29-397 / METRIC SIzESIncludes 5 ToolsSizes: 4, 5, 6, 8, 10 mm

Choose from Ball End or Straight End.

Plastic dipped cushion grip handles.


Hex size stamped on handle. Balanced loop design for maximum leverage. 8650 alloy steel. Pkg: 1 each.

Part no. Part no. Hex6" ARM 9" ARM Size6852 6862 3/326853 6863 7/646854 6864 1/86855 6865 9/646856 6866 5/326857 6867 3/166858 6868 7/326859 6869 1/46860 6870 5/166861 6871 3/8

Part no. Sizeno. Keys Range6814 8 .050 - 5/32"6815 9 5/64 - 1/4"6813 5 3/16 - 3/8"6816 7 1.5 - 6 mm6817 6 4 - 10 mm

T-Handle Hex Key Wrenches

T-Handle Hex Key Wrench Sets

With Metal Stand

Part Arm no. Sizeno. Length Pieces Range6818 6" 10 3/16" - 3/8"6819 9" 10 3/16" - 3/8"

Rugged keys fold up into a convenient case like a pocket knife. Case doubles as a handle. Made from 8650 alloy steel. Black oxide finish. Pkg: 1 each.

Fold-Up Hex Key Tools


Swivel-Lock®

Side Push Button

Our biggest seller by far, this hefty, rugged tool is built to last a lifetime! Features the "Safety Nose"— a secure top and bottom nose overlap that will not split or separate. Ergonomic design fits the hand for a more comfortable grip. All metal construction. 3 blades included. Blade storage in handle. Color: Hi-visible orange. Made in U.S.A. Pkg: 1 each. Part no. 21-300

Replacement blades: 10-532 bulk, 10-531 dispenser.

Safety nose Retractable

Side retractor assures stable blade position. Push re-tractor button to release. Slides in 2 blade positions. Die cast metal construction. 1 heavy duty blade included. Color: Silver. Hyde model no. 42000. Made in U.S.A. Pkg: 1 each. Part no. 10-526

Replacement blades: 10-532 bulk, 10-531 dispenser

Push-button and "swivel" the handle open for quick blade change-overs . Ergonomic design fits the hand for a more comfortable grip. Safety nose features secure top and bottom nose overlap that will not split or separate. All metal die-cast construction. 3 blades included. Blade storage in handle.Pkg: 1 each. Part no. 10-742

Replacement blades: 10-619 dispenser

Utility Knives and Scrapers

Razor Blade Scrapers

Part Blade no. Brand Thickness Pkg10-531 Hyde .025" 1 Fits our part numbers 10-526, 10-527, 21-300. Fits Hyde models: 42000, 42020, 42023, 42050, 42060, 42065, 42066, 42070, 42080, 42085, 42090, 13200 . Fits Stanley models 10-099, 10-199, 10-299, 28-499.

10-618 Stanley .017" 1Fits Stanley models: 10-199, 10-299, 10-519, 10-599, 10-901.

(Actual sizes below)

10-531

10-618

Knife Blades with dispenserHandy dispenser contains 100 utility knife blades. Designed to be wall hung or fits easily into a tool box. Dispenses one at a time for safety and convenience. Choose from 3 blade styles.

Bulk Knife BladesHandy bulk box of 100 heavy duty industrial quality blades. Dispenses 5 blades at a time (20 packs of 5 blades).Fits most utility knives. Thickness: .025". Made in U.S.A. Part ......................................................................Pkgno. description Qty10-532 ..... Bulk knife blades, 100 per box ..............1Fits our part numbers 10-526, 10-527, 21-300. Fits Hyde models: 42000, 42020, 42023, 42050, 42060, 42065, 42066, 42070, 42080, 42085, 42090, 13200 (scraper). Fits Stanley models 10-099, 10-199, 10-299, 28-499.

Single edge Razor Blades

Use in razor blade scrapers, razor knives, wallcovering knives and vinyl knives. Industrial quality steel. Oiled to prevent rusting. Individually wrapped for safe handling.Made in U.S.A

Part Pkgno. description Qty10-522 ... Single Edge Blades, 100 per Box............1

Removes paint and stickers from window glass. Retractable blade. Safe locking push button control. Includes one single edge razor blade. Polished metal construction. Hyde model no. 13000. Made in U.S.A. Pkg: 1 each. Part no. 10-521

Replacement blades: 10-522 bulk


Putty Knife

Wall Scraper

Joint Knife

Multipurpose utility wire for wrapping and tying. Made from annealed steel wire. Plain black finish.

Furnished in 5 lb. spools.

Part Wire Pkgno. Gauge dia. Qty1831 20 .0348" 1 RL1832 18 .0470" 1 RL1833 16 .0630" 1 RL

Putty Knives& Scrapers

High carbon steel blades. Durable handles resistant to common paint thinners.

Part Blade Blade O.A.no. Style Width Type Length10-499 Putty Knife 1-1/4" Stiff 7-1/410-502 Putty Knife 1-1/2" Stiff 7-3/410-505 Putty Knife 2" Stiff 8"10-508 Wall Scraper 3" Stiff 8"10-519* Burn-off, Bent 3" Stiff 9"10-510 Joint Knife 4" Flexible 8"

Mechanic's Wire(Baling Wire)

Part Tumbler Pkg SHACKLeno. Keyed Qty A B WidthGas Pumps, Lockers, Tool Boxes10-604 Different 1 9/32 3/4 1-1/210-605 Alike 6 9/32 3/4 1-1/2Cabins, Sheds, Boat Houses10-602 Different 1 5/16 15/16 1-3/410-603 Alike 6 5/16 15/16 1-3/4Vending Machines, Store Fronts10-600 Different 1 7/16 1" 2"10-601 Alike 6 7/16 1" 2"Truck Doors, Warehouses, Box Cars10-598 Different 1 7/16 1" 2-1/210-599 Alike 6 7/16 1" 2-1/2

Recommended for high security uses. Very resistant to physical abuse. Case hardened and chrome plated alloy steel shackle. Exclusive patented shackle design guards against shimming or rapping. Resilient bumper keeps padlock from marring or scratching. Cadmium plated body. Note: "Keyed-alike" locks sold only in packages of 6.

Laminated Pad Locks


Part Pkgno. Size Qty17-005 1/2" x 60 yards 7217-006 3/4" x 60 yards 4817-007 1" x 60 yards 3617-009 2" x 60 yards 24

Part Pkgno. Size Qty03-1668 1.88" x 35 yards(Black) 103-1669 3" x 10 yards (Black) 103-1670 1.88" x 30 yards (White) 1

Excellent for general painting and masking. Not recommended for use on automotive finishes.

High strength with exceptional adhesive qualities. Ap-ply to sheet metal and fiber duct. Stops air leakage and prevents dust, moisture, and odors from entering duct. Ideal for attaching duct insulations. Color: Silver.Made in U.S.APart Pkgno. Size Qty17-004 ................... 2" x 60 yards .........................24

Color: Silver. Made in U.S.A.

Part Pkgno. Size Qty03-1667 ................. 2" x 60 yards .........................24

Strapping TapeFiberglass Filament

Tough, durable, and tear-proof. Excellent for carton sealing. High tensile strength for heavy cartons, pal-letizing loads or strapping steel rods.

Part Pkgno. Size Qty17-011 3/4" x 60 yards 4817-012 1" x 60 yards 3617-159 2" x 60 yards 24

Clear Carton Sealing Tape &

dispenser

Clear, pressure sensitive polyethylene packaging tapeadheres to all types of cartons. Highly impact resistant.Quick and easy dispenser (sold separately) is plastic construction. Designed for all 2" wide packaging tapes.

Part Pkgno. description Qty17-101 Carton Sealing Tape, 2" x 165' 36 RL17-102 Tape Dispenser 1 EA

General Purpose Masking Tape

GORILLA Tape

Premium duct Tape

All Purpose duct Tape


Steel Shim Stock

Part no. Thickness Pkg12-020 .003" 1 RL12-022 .004" 1 RL12-023 .005" 1 RL12-024 .006" 1 RL12-025 .007" 1 RL12-028 .010" 1 RL12-031 .015" 1 RL12-034 .020" 1 RL12-036 .025" 1 RL12-037 .031" 1 RL

Precise thicknesses to handle almost any shimming application. Use individually or combine them for the size you need. Shim Stock can be bored, stamped, cut, milled, sheared, and drilled into any shape and size. Used in tool and die set up, machine assembly and repair - mounting motors and pumps, prototype work and pilot production runs. Roll size: 6"W x 100"L

Part no. Size Thickness Bags per Box

LINEAR HI-DENSITY CAN LINERS, CLEAR Economical. Twist ties are not included. Perforated roll.

17-126 12-16 gal .315 mil 1000LNRz-8048UKX1 40-45 gal .870 mil 150

LOW DENSITY CAN LINERS, BLACK Big bags for lightweight trash like leaves, paper, etc.

Twist ties included. Individually packaged.17-134 55 gal. .650 mil 200

HEAVY DUTY CAN LINERS, BLACK Big, tough bags for heavy refuse. Twist ties included. Perforated roll.

17-128 33 gal. 1½ mil 10017-129 55 gal. 1½ mil 50Order unit: 1 Box

Can Liners

Shop Towels

Part Pkg no. Qty33-002 CENTERPULL, 2 PLY, WHITE 8 X660 WHT 6/CS33-003 SWEAT SHIRT CLOTH WIPERS 25lb33-010 ROLL WHITE PREFERENCE BRAND 30/CS33-012 WHITE T-SHIRT WIPERS 25lb

WypAll® x60Reinforced Wipers

Tough 4-ply towels with nylon reinforcement for extra strength, even when wet. Convenient pop-up box keeps towels clean, fresh and uncontaminated. Color: white. Made in U.S.A. Case lots contain 10 inner boxes.

Part Sheet Sheets Pkgno. Size per box Qty17-072 9.1"x16.8" 126 count 10

C-Fold Towels & dispenser

This highly absorbent flat sheet paper towel. Packaged in convenient 200 sheet sleeves (12 sleeves/case). Color: white. Sold only by the case.

Part Sheet Sheets Pkgno. Size per case Qty17-070 10.25"x12.75" 2,400 1 Case17-071 Metal Wall Dispenser (white) 1 Ea

Perfect for jobs outside or wet work sites as it is de-signed to keep your towels clean and dry both indoors and out.Part Number SWS-70140

Big Grip® Buckets


BLACKSMITH/enGIneeRS/CROSSPeIn/dOUBLe FACed (OVAL eye)

Part eye Toolno. Length Size Size21-474 16" 3/4 x 1 2-1/2 - 4 lbs.21-475 18" 1 x 1-1/4 6 - 8 lbs.

SLedGe/SPIKe MAUL/WOOd-CHOPPeRS MAUL

Part eye Toolno. Length Size Size21-477 36" 1 x 1-3/8 6-16 lbs.

Hickory Hammer HandlesFlame tempered, American hickory. Hickory's long fibers and unique cellular structure allows this handle to

absorb and dissipate impact shock before it reaches the user. Clear lacquer finish. Each handle includes one steel and one wooden wedge. All Pkg. Qty. - 1 each

nAIL/CLAW/CARPenTeRS HAMMeRS

Part eye Toolno. Length Size Size21-468 12" 7/16 x 13/16 4 - 7 oz.21-469 13" 1/2 x 15/16 13 oz.21-470 14" 9/16 x 1-1/16 16-20 oz.

MACHInIST/BALL PeIn HAMMeRS

Part eye Toolno. Length Size Size21-471 12" 7/16 x 3/4 8-12 oz.21-472 14" 17/32 x 29/32 16-20 oz.21-473 16" 19/32 x 1-1/16 24-28 oz.

HATCHeTS - HALF/CLAW/BUILdeRS/BROAd

Part eyeno. Length Size21-476 14" 9/16 x 1-9/16


Metal Funnels Sturdy utility funnel for all-purposeuse. Rimless, solid tin. Has ring on the lip for reinforcement.

Part no. Capacity diam. Pkg12-75009 10 oz. 4-1/2" 112-75010 24 oz. 5-3/4" 112-75011 32 oz. 6-1/2" 112-75012 56 oz. 8" 1

Steel drain Pan

Full drawn, galvanized steel. For oil, transmission fluid, coolant, etc.. No seams. Rolled edge. Capacity

is 2½ gallons. Part no. 12-087

Durable, corrosion resistant and leakproof. Use with any fluid, except strong acids. Hot-dipped galvanized steel. Made in U.S.A.

Part no. Capacity PkgRIgId SPOuT

12-75401 1 quart 1FLEXIBLE SPOUT

12-75441 1 quart 112-75442 2 quart 112-75444 4 quart 1

Galvanized Measures

Part no. Capacity diam. Pkg12-75060 8 oz. 3-3/4" 512-75062 16 oz. 5-1/2" 512-75064 48 oz. 7-1/2" 5

10" diameter funnel designed for filling tractors and heavy equipment with diesel fuel. Large 8 quart ca-

pacity. Galvanized steel with brass screen. Part no. 12-085

A drain pan and large capacity storage container all-in-one, with carry handles and easy pour spout. Includes plugs for transporting to a recycling center.

3.75 gal. capacity. Part no. 12-084

15" flexible metal tube extension is perfect for hard-to-reach places like transmissions. Mesh strainer

screen. Hot-dipped galvanized steel. Diameter: 5-3/4". Part no. 12-086

Plastic Recovery drain Pan

Plastic Funnels

extention Funnel

Tractor Funnel


Section 18 Assortments, Bins

& CabinetsAAkro Bins 18-12Assortment Index 18-4, 18-5, 18-6, 18-7

BBins

Corrugated 18-12Plastic (Akro style) 18-12Steel Storage 18-8, 18-12

BoxesCorrugated Shelf 18-12Styrene Parts 18-13

CCabinets, Storage 18-11, 18-12Clear Styrene Boxes 18-13

DDividers

Cabinet 18-11Drawers, Parts 18-10

KKits 18-6, 18-7

PParts Bins 18-8, 18-12

RRacks

Slide 18-9Wire Spool 18-12

RodStorage Rack 18-12

SShelf Boxes 18-12Slide Racks 18-9Storage

BinsAkro 18-12Cardboard 18-12Steel 18-8

Boxes, Styrene 18-13Cabinets 18-11Miscellaneous 18-12Parts Drawers 18-10Racks 18-9, 18-12

TThreaded Rod Rack 18-12

WWelding

RodCabinet 18-12

WireRack 18-12


It only takes 3 things to make your shop run smoothly...

Assortments! Assortments! Assortments! And makes it easy for you!HUndRedS OF ASSORTMenTS In STOCK! Ask your MPI representative to show you our Assortment Catalog with hundreds of special assortments to fit your needs. For details, call our office to request a fax of the actual lid chart showing illustrations and quantities. Look for our flyers showing the “Assortment of the Month”, featuring new assortments and standard assortments at bargain prices.

STAndARd ASSORTMenTS We have popular assortments on the shelf and ready to ship. They include the most popular items and sizes used and a generous quantity of parts to get you started. Many standard assortments have space available for future expansion.

CUSTOM ASSORTMenTS We make custom assortments from scratch or by modifying our regular assortments.

LABeLS WITH ACTUAL SIZe ILLUSTRATIOnS Most assortments have actual size pictures to make choosing and sorting parts easy. All assortments have our part numbers clearly labeled to make ordering a breeze.

dRAWeR FROnT LABeLS Each assortment has a picture label on the front to help you easily locate what parts are in what bin.

STORAGe OPTIOnS Choose from several styles of bins and cabinets to suit your needs. The cost of storage equipment is always included in the assortment, so it’s yours to keep! You never have to worry about anyone removing your bins because you switched vendors.

PARTS BIn ASSORTMenTS Our steel parts bins are the heaviest in the industry. It will take all the rough handling you can give it and still come back for more! No sharp edges to cut you. Clearly labeled and coated with a plastic spray to allow easy cleanup.

MAInTenAnCe KITS Our handy Maintenance Kits make stocking a large variety of parts easy and inexpensive. Each kit is in a see-through styrene plastic compartmented box so you can see at a glance just what’s inside. The lid is labeled for easy reordering.

dRAWeR ASSORTMenTS Our most popular assortments come equipped with a steel drawer, featuring a lift-up lid that latches shut to keep out dirt and prevent spillage. The drawers fit easily in the handy steel slide rack (shown at right) and most competive slide rack brands. Ask your sales representative how you can get a FREE 4-DRAWER SLIDE RACK to hold your new drawer assortments. The rust-proof, seamless heavy duty plastic insert has been on the market for years and will take the toughest abuse. Deep pockets hold a full box of small parts.

BIn SeRVICe Your MPI representative can restock your parts room on a scheduled basis with just the right amount of product you need.

LABeL SeRVICe Are your old bin labels dirty and torn? Give us a list and we’ll make more for you..at no charge!


Hex HeAd CAP SCReWSPart Bin no.no. description Type Sizes Cabinet72-100 .............. GRADE 5 NC w/Nuts and Washers, 1/4-3/4 to 4" ....................................................................................................... 1 ........... 72 ........98-72B 80-100 .............. GRADE 5 NC - same as 72-100, except with two 40 hole bins. ................................................................................... 2 ........... 72 ....2, 98-40B 72-100R ............ ASSORTMENT REFILL for 72-100, 80-100 (above) ..................................................................................................... - ........... 72 .................. -72-102 .............. GRADE 5 NC w/Nuts and Washers, 1/4-3/4 to 4" ........................................................................................................ 1 ........... 72 ........98-72B 72-110 ............... GRADE 5 NC w/Nuts and Washers, 1/4-3/4 to 6" - extra long lengths ......................................................................... 1 ........... 72 ........98-72B 80-110 ............... GRADE 5 NC - same as 72-110, except with two 40 hole bins. .................................................................................... 2 ........... 72 ....2, 98-40B72-110R ............ ASSORTMENT REFILL for 72-110 or 80-110 (above).................................................................................................. - ........... 72 .................. -40-100 .............. GRADE 5 NC w/Nuts and Washers, 1/4-1/2 to 3" ....................................................................................... ............... 2 ........... 40 ........98-40B 40-100R ............ ASSORTMENT REFILL for 40-100 assortment (above) ............................................................................................... - ........... 40 .................. -16-0124 ............ GRADE 5 NC w/Nuts, 1/4-1/2 to 3" ............................................................................................................................. 3 ........... 24 ..... 98-DL24 72-104 .............. GRADE 8 NC w/Nuts and Washers, 1/4-3/4 to 4" ........................................................................................................ 1 ........... 72 ........98-72B80-104 .............. GRADE 8 NC same as 72-104, except with two 40 hole bins. ...................................................................................... 2 ........... 72 ....2, 98-40B40-102 .............. GRADE 8 NC w/Nuts and Washers, 1/4-1/2 to 3" ........................................................................................................ 2 ........... 40 ........98-40B 72-105 .............. GRADE 8 NF w/Nuts, 1/4-3/4 to 6" - extra long lengths .............................................................................................. 1 ........... 72 ........98-72B72-106 .............. GRADE 8 NF w/Nuts and Washers, 1/4-3/4 to 4" .......................................................................................................... 1 ........... 72 ........98-72B40-103 .............. GRADE 8 NF w/Nuts and Washers, 1/4-1/2 to 3" .......................................................................................................... 2 ........... 40 ........98-40B 40-104 .............. METRIC CLASS 8.8 COARSE M6-M12 dia. w/Nuts and Washers .............................................................................. 2 ........... 32 ........98-40B40-104R ............ ASSORTMENT REFILL for 40-104 (above) ................................................................................................................. - ........... 32 .................. -16-2424 ............ METRIC CLASS 8.8 COARSE M4-M7 dia. w/Nuts ..................................................................................................... 3 ........... 24 ..... 98-DL2416-2524 ............ METRIC CLASS 8.8 COARSE M8-M12 dia. w/Nuts ................................................................................................... 3 ........... 24 ..... 98-DL24512MK .............. METRIC CLASS 8.8 COARSE M4-M10 dia. w/Nuts and Washers ............................................................................... 4 ........... 22 ........ 13-99440-112 ............... METRIC ALLOY CLASS 10.9 COARSE M6-M12 dia. w/Nuts and Washers ................................................................ 2 ........... 32 ........98-40B40-111 ............... STAINLESS STEEL T18-8, NC w/Nuts and Washers, 1/4-1/2 to 3" ............................................................................ 2 ........... 32 ........98-40B16-4924 ............ STAINLESS STEEL T18-8, NC w/Nuts and Washers, 1/4-1/2 to 2½" ......................................................................... 3 ........... 24 ..... 98-DL24

Assortments

TyPe 1 TyPe 2 TyPe 3 TyPe 5TyPe 4

nUTS & WASHeRS16-0220 ............ NUTS, GRADE C OVAL LOCK, NC and NF 1/4-1" dia., zinc plated alloy steel, waxed ................................................ 3 ........... 20 ..... 98-DL20535MK .............. NUTS, GRADE C OVAL LOCK, NC, 1/4-5/8" dia., zinc plated alloy steel, waxed ........................................................ 4 ............ 6 ......... 13-995536MK .............. NUTS, GRADE C OVAL LOCK, NF 1/4-5/8" dia., zinc plated alloy steel, waxed .......................................................... 4 .......... 102 ....... 13-995529MK .............. NUTS, CASTLE, NF 1/4-5/8" dia., zinc plated steel ...................................................................................................... 4 ............ 6 ......... 13-995532MK .............. NUTS, GRADE 5 FINISHED HEX, NC, 1/4-5/8" dia., zinc plated steel ......................................................................... 4 ............ 6 ......... 13-995528MK .............. NUTS, GRADE 5 FINISHED HEX, NF 1/4-5/8" dia., zinc plated steel .......................................................................... 4 ............ 6 ......... 13-995509MK .............. NUTS, KEP® LOCK, 8-32, 10-24, 10-32 (NF), 1/4-20, 5/16-18, 3/8-16, zinc plated steel ............................................ 4 ............ 6 ......... 13-995526MK .............. NUTS, METRIC FINISHED HEX, CLASS 8 COARSE, M4-M12 dia., zinc plated steel ................................................ 4 ............ 6 ......... 13-995527MK .............. NUTS, NYLON LOCK,NF 1/4-5/8" dia., zinc plated steel .............................................................................................. 4 ............ 6 ......... 13-995507MK .............. NUTS, NYLON LOCK, NC, 1/4-5/8" dia., zinc plated steel ............................................................................................ 4 ............ 6 ......... 13-99516-0120 ............ NUTS, NYLON LOCK, NC and NF, no.10-3/4" dia., zinc plated steel ........................................................................... 3 ........... 18 ..... 98-DL20533MK .............. NUTS, SLOTTED, NC 1/4-5/8" dia. ............................................................................................................................... 4 ............ 6 ......... 13-995534MK .............. NUTS, SLOTTED, NF 1/4-5/8" dia. ............................................................................................................................... 4 ............ 6 ......... 13-995508MK .............. NUTS, WING, NC #8-1/2" dia., zinc plated forged steel ............................................................................................... 4 ............ 6 ......... 13-99516-0720 ............ WASHERS, EXTRA THICK SAE FLAT ALLOY, sizes 1/4-3/4 dia., zinc dichromate ..................................................... 3 ............ 8 ...... 98-DL2016-0324 ............ WASHERS, SHAKEPROOF, Internal and External, 6-5/8" dia., zinc plated steel ......................................................... 3 ........... 24 ..... 98-DL24510MK .............. WASHERS, SHAKEPROOF, External, 6-1/2" dia., zinc plated steel ............................................................................. 4 ............ 9 ......... 13-997

Can't find the right assortment? Your MPI representative can help you design a custom assortment to fits your needs!"Customerized" Assortments


AssortmentsSCReWSPart Bin no.no. description Type Sizes Cabinet16-4712 ............ DRYWALL AND DECK, Phillips Twinfast, Black Oxide, w/insert bits and holder ........................................................... 3 ........... 11 ..... 98-DL1216-5012 ............ CONCRETE SCREWS, Hex and flat head, 3/16" & 1/4" dia. to 3-1/4" lg., w/drills (space for installation kit) .............. 3 ........... 11 ..... 98-DL1216-1824 ............ MACHINE, Flat Hd. Slotted, zinc plated steel, 6-1/4-1½ w/Nuts ................................................................................... 3 ........... 24 ..... 98-DL2416-4624 ............ MACHINE, Flat Hd. Slotted, Brass, 6,8,10 and 1/4 w/Nuts ........................................................................................... 3 ........... 24 ..... 98-DL2416-1524 ............ MACHINE, Round Hd. Slotted, zinc plated steel, 6-1/4-1½ w/Nuts ............................................................................... 3 ........... 24 ..... 98-DL2416-1624 ............ MACHINE, Round Hd. Slotted, zinc plated steel, 6-12 to 1½ w/Nuts ............................................................................ 3 ........... 24 ..... 98-DL2416-1724 ............ MACHINE, Round Hd. Slotted, zinc plated steel, 6-1/4 to 2" w/Nuts ............................................................................. 3 ........... 24 ..... 98-DL24502MK .............. MACHINE, Round Hd. Slotted, zinc plated steel, 6,8,10 (NC only) w/Nuts ................................................................... 4 ........... 12 ........ 13-996503MK .............. MACHINE, Round Hd. Slotted, zinc plated steel, 6,8,10 ,1/4 w/Nuts ........................................................................... 4 ........... 18 ........ 13-993504MK .............. MACHINE, Round Hd. Slotted, zinc plated steel, 10-32,12,1/4 w/Nuts ......................................................................... 4 ........... 12 ........ 13-99616-2224 ............ MACHINE, Round Hd. Slotted, 18-8 Stainless Steel, 6-1/4 to 1½ w/Nuts ..................................................................... 3 ........... 24 ..... 98-DL2416-3924 ............ MACHINE, Pan Head Phillips Steel, 1/4 to 1½ w/Nuts .............................................................................................. 3 ........... 24 ..... 98-DL2416-2924 ............ MACHINE, METRIC Pan Head Phillips Steel, 3mm - 8mm dia. to 40mm ................................................................. 3 ........... 24 ..... 98-DL2416-4524 ............ MACHINE, Round Hd. Slotted, Brass, 6-1/4 to 1½ w/Nuts............................................................................................ 3 ........... 24 ..... 98-DL2416-1324 ............ SHEET METAL, Hex Wshr. Hd. Slotted and Unslotted, zinc plated steel, 6-5/16 .......................................................... 3 ........... 24 ..... 98-DL2416-1424 ............ SHEET METAL, Hex Hd., zinc, 6-3/8 to 2" ................................................................................................................... 3 ........... 24 ..... 98-DL2416-0924 ............ SHEET METAL, Oval Hd. Phillips, zinc plated steel, 6-14 to 1½ ................................................................................... 3 ........... 24 ..... 98-DL2416-1024 ............ SHEET METAL, Oval Hd. Phillips, Black Oxide, steel, 6-10 to 1½ ................................................................................ 3 ........... 24 ..... 98-DL2416-0724 ............ SHEET METAL, Pan Hd. Slotted, zinc plated steel, 6-14 to 1½ .................................................................................... 3 ........... 24 ..... 98-DL24500MK .............. SHEET METAL, Pan Hd. Slotted, zinc plated steel, 6-14 to 1¼ .................................................................................... 4 ........... 12 ........ 13-99416-2324 ............ SHEET METAL, Pan Hd. Slotted, Stainless steel, 6-14 to 1½ ....................................................................................... 3 ........... 24 ..... 98-DL2416-0824 ............ SHEET METAL, Pan Hd. Phillips, zinc plated steel, 6-14 to 1½ .................................................................................... 3 ........... 24 ..... 98-DL24501MK .............. SHEET METAL, Pan Hd. Phillips, zinc plated steel, 6-14 to 1¼ .................................................................................... 4 ........... 12 ........ 13-99416-5124 ............ SHEET METAL, Pan Hd. Phillips Stainless steel, 6-14 to 1½ ....................................................................................... 3 ........... 24 ..... 98-DL2416-1124 ............. SHEET METAL, Pan and Round (OEM) Phillips Trim, Black Oxide, steel, 6-10 to 1½ ................................................. 3 ........... 24 ..... 98-DL24547MK .............. SHEET METAL, ONE-WAY SECURITY,Round Hd., zinc plated steel, 6-14 to 1" ...................................................... 4 ........... 11 ........ 13-99416-0620 ............ TEKS (Self-Drilling), Hex and Pan Hd., 8,10,12 and 14 dia., zinc plated steel .............................................................. 3 ........... 20 ..... 98-DL20505MK .............. TEKS (Self-Drilling), Hex Hd., 8,10,12 and 14 dia., zinc plated steel ........................................................................... 4 ............ 6 ......... 13-99516-1924 ............ THREAD CUTTING, Hex Hd., NC threads, 6-3/8 dia., zinc plated steel ....................................................................... 3 ........... 24 ..... 98-DL2416-2124 ............ WOOD Flat Hd. Slotted, 6-14 dia., zinc plated steel ...................................................................................................... 3 ........... 24 ..... 98-DL24

SOCKeT SCReWS16-0424 ............ SOCKET HEAD CAP SCREWS, NC sizes 1/4-1/2 to 2-1/2" ......................................................................................... 3 ........... 24 ..... 98-DL2416-2624 ............ METRIC SOCKET CAPSCREWS, CLASS 12.9 COARSE, M4-M12 dia. ..................................................................... 3 ........... 24 ..... 98-DL2416-2724 ............ METRIC SOCKET CAPSCREWS, FLAT HEAD, CLASS 10.9 COARSE, M4-M12 dia. ................................................ 3 ........... 24 ..... 98-DL2416-0524 ............ FLAT SOCKET HEAD CAP SCREWS, NC sizes 1/4-1/2 to 2½" .................................................................................. 3 ........... 24 ..... 98-DL2416-0624 ............ SOCKET SET SCREWS, NC, cup Point, 6-5/8" dia. ..................................................................................................... 3 ........... 24 ..... 98-DL24506MK .............. SOCKET SET SCREWS, NC and NF, cup Point, No.6-3/8" dia. ................................................................................... 4 ........... 18 ........ 13-99316-2824 ............ METRIC SOCKET SET SCREWS, CLASS 12.9 COARSE, M3-M12 dia. ..................................................................... 3 ........... 24 ..... 98-DL24

HOSe CLAMPS2396.................. HOSE CLAMPS, STANDARD partial stainless worm-drive clamps, sizes 4 - 36 and deluxe wire rack ......................... - ........... 10 ........... 23982397.................. HOSE CLAMPS, ALL STAINLESS STEEL worm-drive clamps, sizes 4 - 36 and deluxe wire rack ............................... - ........... 10 ........... 2398540MK .............. HOSE FERRULES, BRASS, for assembling low pressure hoses up to .850" OD ........................................................ 4 ............ 6 ......... 13-995

AnCHORS511MK .............. ANCHORS, PLASTIC, 6-8, 10-12, 14-16 with tapping screws (no drills) ..................................................................... 4 ............ 6 ......... 13-99523-114 ............... ANCHORS, PLASTIC, 6-8 with tapping screws and concrete drill .............................................................................. 4 ............ 2 ..........Plastic23-115 ............... ANCHORS, PLASTIC, 10-12 with tapping screws and concrete drill .......................................................................... 4 ............ 2 ..........Plastic23-116 ............... ANCHORS, PLASTIC, 12-14 with tapping screws and concrete drill .......................................................................... 4 ............ 2 ..........Plastic546MK .............. ANCHORS, NYLON WALLBOARD, also includes pan hd. tapping screws and flat washers .................................... 4 ............ 5 ......... 13-995541MK .............. ANCHORS, zINC WALLBOARD, also includes pan hd. tapping screws and flat washers ........................................... 4 ............ 5 ......... 13-99516-5012 ............ CONCRETE SCREW, hex and flat head, 3/16" and 1/4" dia., special concrete screw drills included ......................... 3 ........... 11 ..... 98-DL12


Assortments

O-RInGS16-3524 ............ O-RING ASSORTMENT, Buna N Rubber, 1/4 thru 2-1/8" OD (1/16", 3/32", 1/8" & 3/16" dia.) ..................................... 3 ........... 24 ..... 98-DL2416-6232 ............ 1/16" O-RING ASSORTMENT, Buna N Rubber, 1/4 thru 2-3/8" OD (all 1/16" dia.) .................................................... 3 ........... 30 ..... 98-DL3216-6324 ............ 1/32" O-RING ASSORTMENT, Buna N Rubber, 5/16 thru 1-11/16" OD (all 1/32" dia.) .............................................. 3 ........... 24 ..... 98-DL2416-6432 ............ 1/8" O-RING ASSORTMENT, Buna N Rubber, 3/4 thru 3-1/2" OD (all 1/8" dia.).......................................................... 3 ........... 32 ..... 98-DL32519MK .............. MAINTENANCE KIT, Buna N Rubber, 1/4-1-3/16 OD (1/16", 3/32", 1/8" dia.) .............................................................. 4 ........... 18 ........ 13-99310-675 .............. PLUMBERS' KIT, Buna N Rubber, 3/8-1-1/8" OD ......................................................................................................... 4 ........... 12 .........Plastic10-676 .............. UNIVERSAL KIT, Buna N Rubber, 1/4-2-1/8" OD .......................................................................................................... 4 ........... 30 .........Plastic10-677 .............. VITON KIT, Special High Temperture Viton Rubber, 1/4"- 2-1/8" OD ........................................................................... 4 ........... 30 .........PlasticAV-15961 .......... METRIC KIT, Buna N Rubber, M5.4 - M24 OD ......................................................................................................... 4 ........... 36 .........Plastic

PInS16-0320 ............ ASSORTED PINS, Cotter Pins, Hitchpin Clips, Lynch Pins and Wire Lock Pins........................................................... 3 ........... 20 ..... 98-DL2016-3224 ............ CLEVIS, standard and universal, 3/16-1/2" dia. .......................................................................................................... 3 ........... 24 ..... 98-DL2416-3024 ............ COTTER, 1/16-1/4" dia., zinc plated steel ..................................................................................................................... 3 ........... 24 ..... 98-DL24515MK .............. COTTER, 1/16-3/16 dia., zinc plated steel .................................................................................................................... 4 ............ 6 ......... 13-995514MK .............. HITCH PIN CLIPS, 1/4-1" shaft size. ............................................................................................................................. 4 ............ 6 ......... 13-99516-5224 ............ SPIROL (COILED) 1/16-5/16 dia., plain finish steel ...................................................................................................... 3 ........... 24 ..... 98-DL2416-0132 ............ SPRING (ROLL), 1/16-1/2 dia., zinc plated steel........................................................................................................... 3 ........... 32 ..... 98-DL32 513MK .............. SPRING (ROLL), 1/16-3/8 dia., zinc plated steel........................................................................................................... 4 ........... 32 ........ 13-994

FITTInGSPart Bin no.no. description Type Sizes Cabinet16-4024 ............ AIRBRAKE COMPRESSION FITTINGS, Brass, 1/4-1/2 OD tube (for copper airbrake tubing) ................................... 3 ........... 24 ..... 98-DL2416-4124 ............ AIRBRAKE NTA FITTINGS, Brass, 1/4-5/8 OD tube (for nylon airbrake tubing) ........................................................... 3 ........... 24 ..... 98-DL2416-0332 ............ COMPRESSION FITTINGS, Brass, 1/8-3/8 OD tube .................................................................................................... 3 ........... 32 ..... 98-DL3216-0432 ............ COMPRESSION FITTINGS, Brass, 1/4-5/8 OD tube .................................................................................................... 3 ........... 32 ..... 98-DL3216-4224 ............ FLARE FITTINGS, SAE 45°, Brass 1/4-1/2 OD tube ................................................................................................... 3 ........... 24 ..... 98-DL24520MK .............. GREASE FITTINGS, STANDARD 1/4-28 and 1/8PT straight, 45° angle and 90° angle, some long lengths ............... 4 ............ 8 ......... 13-997521MK .............. GREASE FITTINGS, STANDARD 1/4-28 and 1/8PT straight, 45° angle and 90° angle ............................................ 4 ............ 6 ......... 13-995522MK .............. GREASE FITTINGS, METRIC, M6x1.0, M8x1.0, M10x1.0 pitch in straight, 45° angle and 90° angle ........................ 4 ............ 9 ......... 13-99716-6524 ............ GREASE FITTINGS, STANDARD straight, 45° angle and 90° angle, DRIVE TYPE and METRIC straight, w/ dust caps 3 ......... 18 ..... 98-DL2440-105 .............. HYDRAULIC HOSE ENDS & ADAPTERS, Parker series 43 ends, 1/4-1" I.D. with popular adapters ....................... 2 ........... 26 ........98-40B16-6024 ............ INSTANT PUSH-IN FITTINGS, ACETYL, 1/4 and 3/8" OD ........................................................................................ 3 ........... 19 ..... 98-DL24 16-5924 ............ INSTANT PUSH-IN FITTINGS, BRASS INDUSTRIAL,1/8 to 1/2" tube OD ........................................................... 3 ........... 19 ..... 98-DL24 16-6124 ............ INSTANT PUSH-IN FITTINGS, BRASS AIRBRAKE, 1/8 to 1/2" tube OD .................................................................... 3 ........... 19 ..... 98-DL2416-4324 ............ INVERTED FLARE, Brass, for 3/16-3/8 OD steel tubing ............................................................................................... 3 ........... 24 ..... 98-DL2416-5632 ............ PIPE FITTINGS, BLACK 150# MALL. IRON, 1/8-1/2 NPT ..................................................................................... 3 ........... 28 ..... 98-DL3240-107 .............. PIPE FITTINGS, BLACK 150# MALL. IRON, 1/8-3/4 NPT ........................................................................................... 2 ........... 34 ........98-40B40-117 ............... PIPE FITTINGS, BLACK 150# MALL. IRON, 150#, 1"-2" NPT .............................................................................. 2 ........... 28 ........98-40B16-5732 ............ PIPE, GALVANIzED 150# MALL. IRON, 1/8-1/2 NPT ........................................................................................... 3 ........... 28 ..... 98-DL3240-108 .............. PIPE, GALVANIzED IRON, 150#, 1/8-3/4 NPT ............................................................................................................ 2 ........... 34 ........98-40B40-118 ............... PIPE, GALVANIzED 150# MALL. IRON, 150#, 1"-2" NPT ...................................................................................... 2 ........... 28 ........98-40B16-0232 ............ PIPE FITTINGS, BRASS HEX, 1/8-3/8 NPT elbows, plugs, tees, couplers, bushings, nipples .................................. 3 ........... 32 ..... 98-DL3216-5832 ............ PIPE FITTINGS, BRASS, 1/8-1/2 NPT elbows, plugs, tees, couplers, bushings, nipples ...................................... 3 ........... 28 ..... 98-DL3216-5624 ............ PIPE NIPPLES, BLACK 150# MALL. IRON, 1/8-1/2 NPT ....................................................................................... 3 ........... 20 ..... 98-DL2440-109 .............. PIPE NIPPLES, BLACK 150# MALL. IRON, 150#, 1/8-3/4 NPT .................................................................................. 2 ........... 35 ........98-40B40-119 ............... PIPE NIPPLES, BLACK 150# MALL. IRON, 150#, 1"-2" NPT ................................................................................ 2 ........... 24 ........98-40B16-5824 ............ PIPE NIPPLES, BRASS, 1/8-1/2 NPT ......................................................................................................................... 3 ........... 20 ..... 98-DL2416-5720 ............ PIPE NIPPLES, GALVANIzED 150# MALL. IRON, 1/8-1/2 NPT ............................................................................. 3 ........... 20 ..... 98-DL2440-110 ............... PIPE NIPPLES, GALVANIzED 150# MALL. IRON, 150#, 1/8-3/4 NPT......................................................................... 2 ........... 35 ........98-40B40-120 .............. PIPE NIPPLES, GALVANIzED 150# MALL. IRON, 150#, 1"-2" NPT ........................................................................ 2 ........... 24 ........98-40B16-0420 ............ PUSH-ON FITTINGS, BRASS, 1/4-5/8 ID hose barbs and menders (for low pressure push-on hose) ..................... 3 ........... 20 ..... 98-DL20

eLeCTRICAL TeRMInALS16-5212 ............ BATTERY TERMINALS, FUSIONTM TYPE, 1 & 2 GA, 1/0 AND 2/0 TERMINALS, SHINK TUBING INCLUDED .......... 3 ........... 12 ..... 98-DL1216-2024 ............ ELEKTRALINK, SEALED SOLDER, 24-10 awg ........................................................................................................... 3 ........... 19 ..... 98-DL24542MK .............. ELEKTRALINK, SEALED SOLDER, 20-10 awg, Ring Terminals and Butt Connectors ............................................... 4 ............ 6 ......... 13-99516-5521 ............ KRIMP 'N SEAL, 22-10 awg with heat shrink insulation ........................................................................................... 3 ........... 16 ..... 98-DL21548MK .............. POSI-LOCKTM BUTT CONNECTORS, 24 - 8 awg. no tools required! ................................................................... 4 ............ 3 ......... 13.99516-3724 ............ SOLDERLESS, NYLON w/Ins. Grip, 22-10 awg, includes T-Taps ................................................................................ 3 ........... 24 ..... 98-DL2416-3824 ............ SOLDERLESS, NYLON w/Ins. Grip, 22-10 awg, includes Scotchloks ......................................................................... 3 ........... 24 ..... 98-DL24523MK .............. SOLDERLESS, NYLON w/Ins. Grip, 16 -14 awg (blue), includes Scotchloks .............................................................. 4 ............ 9 ......... 13-997524MK .............. SOLDERLESS, NYLON w/Ins. Grip, 22-10 awg ........................................................................................................... 4 ........... 12 ........ 13-996531MK .............. SOLDERLESS, NYLON w/Ins. Grip, 22 -10 awg, includes T-Taps ............................................................................... 4 ........... 12 ........ 13-99616-0520 ............ SOLDERLESS, VINYL INSULATED, 22-10 awg, includes Scotchloks ........................................................................ 3 ........... 20 ..... 98-DL20530MK .............. SOLDERLESS, VINYL INSULATED, 22-10 awg ........................................................................................................... 4 ........... 12 ........ 13-996525MK .............. WIRE NUTS, gray, blue, orange, yellow and red ........................................................................................................ 4 ............ 6 ......... 13-995


Assortments

KeySTOCK & WOOdRUFF KeyS545MK .............. KEYS, MACHINERY, SQUARE STEEL, 1/8"-3/8" x 1-1/2" . ....................................................................................... 4 ............ 6 ...Plastic box20-139 .............. KEYSTOCK, SQUARE STEEL, 1/8-1/2" x 12" in metal stand ....................................................................................... - ............ 7 ......... 20-14016-5106 ............ KEYSTOCK, SQUARE STEEL, 1/8-1/2" x 12" in steel drawer .................................................................................. 3 ............ 7 ......98-DL6H20-751 .............. KEYSTOCK, SQUARE STAINLESS STEEL, 1/8-1/2" x 12" in metal stand ................................................................... - ............ 7 ......... 20-14016-3624 ............ WOODRUFF KEYS, Sizes 3/32-3/8, plain finish .......................................................................................................... 3 ........... 24 ..... 98-DL24518MK .............. WOODRUFF KEYS, Sizes 3/32-5/16, plain finish ........................................................................................................ 4 ........... 18 ........ 13-993

CUTTInG TOOLS1224.................. CAR REAMER SET, 1/2, 5/8 and 3/4" dia. in custom hardwood case ........................................................................... - ............ 3 ... wood case5983.................. CARBIDE BURS, Double-Cut Flutes, 1/4" shank in custom hardwood case ................................................................ - ............ 8 ... wood case5987.................. DRILL SET, 1/2" REDUCED SHANK, 9/16-1"x16ths, 118° standard point .................................................................... 5 ............ 8 ............ 59671496.................. DRILL SET, AIRCRAFT STRAIGHT SHANK, Type B, 1/16 to 1/2 x 64ths, 135° split pt. ............................................. 5 ........... 29 ........... 60035999.................. DRILL SET, AIRCRAFT STRAIGHT SHANK, Type B, 1/16 to 3/8 x 64ths, 135° split pt. ............................................. 5 ........... 21 ........... 59716006.................. DRILL SET, AIRCRAFT STRAIGHT SHANK, Type B, 1/16 to 1/2 x 32nds, 135° split pt. ............................................ 5 ........... 15 ........... 59701558.................. DRILL SET, BRUTETM 1/2 REDUCED SHANK, 9/16-1"x16ths, 118° split pt.. ............................................................... 5 ............ 8 ............ 59675989.................. DRILL SET, BRUTETM 3/8 REDUCED SHANK, 1/16 to 1/2 x 64ths,135° splt pt. ......................................................... 5 ........... 29 ........... 60031499.................. DRILL SET, BRUTETM STRAIGHT SHANK, Type B, 1/16 to 1/2 x 64ths, 135° split pt. ................................................. 5 ........... 29 ........... 60035994.................. DRILL SET, BRUTETM STRAIGHT SHANK, Type B, 1/16 to 3/8 x 64ths, 135° split pt. ................................................. 5 ........... 21 ........... 59715995.................. DRILL SET, BRUTETM STRAIGHT SHANK, Type B, 1/16 to 1/2 x 32nds, 135° split pt. ................................................ 5 ........... 15 ........... 59705998.................. DRILL SET, BRUTETM STRAIGHT SHANK, Type B, WIRE SIzES #1 - 60 (#1-#47 are 135° split pt.) ......................... 5 ........... 60 ........... 60045997.................. DRILL SET, BRUTETM STRAIGHT SHANK, Type B, LETTER SIzES A to z, 135° split pt. ......................................... 5 ........... 26 ........... 60056010.................. DRILL SET, COBALT STRAIGHT SHANK,Type J, 1/16 to 1/2 x 64ths, 135° split pt. ................................................... 5 ........... 29 ........... 60035991.................. DRILL SET, COBALT STRAIGHT SHANK,Type J, 1/16 to 3/8 x 64ths, 135° split pt. ................................................... 5 ........... 21 ........... 59715992.................. DRILL SET, COBALT STRAIGHT SHANK,Type J, 1/16 to 1/2 x 32nds, 135° split pt. .................................................. 5 ........... 15 ........... 59705993.................. DRILL SET, COBALT STRAIGHT SHANK,Type J, 1/16 to 1/4 x 32nds, 135° split pt. .................................................. 5 ........... 13 ........... 59685972.................. DRILL/TAP SET, BRUTETM NC Spiral Point Taps 6-32 - 1/2-13 with BruteTM drills ....................................................... 5 ........... 18 ........... 59665973.................. DRILL/TAP SET, BRUTETM NF Spiral Point Taps 6-40 - 1/2-20 with BruteTM drills ...................................................... 5 ........... 18 ........... 5969NES-123 .......... THREAD RESTORING KIT contains NES1A, NES2, NES3, Internal thread cleaner, extension rod, extra blades ...... - .............- ............Case5958.................. TAP and DIE SET, NC and NF #4-1/2", carbon steel plug taps and solid round dies .................................................... - .............- ............Case5959.................. TAP and DIE SET, METRIC sizes M3-M12, carbon steel plug taps and solid round dies ............................................. - .............- ............Case

MISCeLLAneOUS16-5306 ............ CABLE TIES, BLACK NYLON, 4" - 15" with steel drawer ......................................................................................... 3 ............ 6 ......98-DL6H29-434 .............. CABLE TIES, BLACK NYLON, 4" 7" and 11" in resealable clamshell container ...................................................... - ............ 3 ...Clam-Shell 16-5406 ............ CABLE TIES, WHITE NYLON , 4" - 15" with steel drawer ........................................................................................... - ............ 6 ......98-DL6H29-432 .............. CABLE TIES, WHITE NYLON, 4" 7" and 11" in resealable clamshell container ........................................................ - ............ 3 ...Clam-Shell 5985.................. EXTRACTORS, SPIRAL FLUTE WITH L.H. DRILLS, #1 thru #5 with sturdy metal index ............................................ 5 ........... 10 .......... Index 50-261 .............. EXTRACTORS, SPIRAL FLUTE, #1 thru #5 in plastic pouch ........................................................................................ - ............ 5 .......... Pouch539MK .............. EXTRACTORS, STRAIGHT FLUTE WITH L.H. DRILLS, #1 thru #5 .......................................................................... 4 ........... 10 ........ 13-9955964.................. DRILL-OUT POWER EXTRACTORS, REGULAR SET, sizes 1/4, 5/16, 3/8, 1/2 .......................................................... 5 ............ 4 ............Case5965.................. DRILL-OUT POWER EXTRACTORS, MICRO SET, sizes 6, 8, 10, 1/4, 5/16, 3/8, 1/2 ................................................. 8 ............ 7 ............Case17-180 .............. FIRST AID KIT, DELUXE, meets OSHA requirements. Weatherproof sealed metal cabinet .................................... - .............- ........... Metal17-180R ............ FIRST AID KIT REFILL (no cabinet) ............................................................................................................................ - .............- ........... Metal16-5532 ............ FUSES, AUTOMOTIVE, Glass fuses, ATC standard blade, ATM mini blade and fuseholders ................................. 3 ........... 30 ..... 98-DL32549MK .............. FUSES, AUTOMOTIVE, ATM mini blade fuses ........................................................................................................ 4 ............ 8 ......... 13-99431-710 .............. GASKET MATERIAL, rubber, cork, and fiber. 6 inch square pieces. ............................................................................ - ............ 3 .......... Boxed16-4706 ............ HEAT SHRINK TUBING, MEDIUM WALL, 3/16-3/4" x 16" ........................................................................................... 3 ............ 6 ......98-DL6H16-5206 ............ HEAT SHRINK TUBING, HEAVY WALL, .300" - 2.00" x 12" ....................................................................................... 3 ............ 6 ......98-DL6H6648.................. HOLE SAW SET, TRADITIONAL ARBORS, Bi-metal,variable pitch, 3/4 to 2½ dia., 3 arbors, 3 drills, 12" extension ........ 4 ............ 15 ...........Case6647.................. HOLE SAW SET, BUILT-IN ARBORS, Bi-metal, variable pitch, 3/4 to 2½, 4 drills, 12" extension ...................................4 ............ 15 ...........Case16-5506 ............ RECIPROCATING SAW BLADES, Bi-metal, 4" to 8" long "Sawzall" style blades ........................................................ 3 ............ 6 ...... 98-DL6V20-916 .............. RIVET TOOL KIT, includes Marson heavy duty riveter (20-915) and 1/8" dia. A/A and A/S blind rivets ...................... - ............ 2 ............Case 16-4806 ............ RIVETS, BLIND, 1/8" and 3/16" dia. A/A rivets (space for optional riveter) .................................................................. 3 ............ 6 ........ 98-ADL12-056 .............. SHIM STOCK, 6" x 12" flat steel sheets, .001" to .031" thickness ................................................................................. - ........... 15 ............. Box

ReTAInInG RInGSPart Bin no.no. description Type Sizes Cabinet16-3324 ............ EXTERNAL AND INTERNAL, shaft sizes to 1½" ........................................................................................................... 3 ........... 24 ..... 98-DL2416-3424 ............ EXTERNAL, INTERNAL, AND E-TYPE, sizes to 1" ...................................................................................................... 3 ........... 24 ..... 98-DL24516MK .............. EXTERNAL, 1/4-1-1/4" shaft dia. ................................................................................................................................... 4 ........... 12 ........ 13-994517MK .............. E-TYPE, 1/16-3/4" shaft dia. .......................................................................................................................................... 4 ........... 12 ........ 13-994


Storage Bins

98-36B / 36 Hole BinStand two narrow 36 Hole Bins side-by-side for a 72 hole bin that can be shipped UPS.Bin size: 17-1/2"W x 42"H x 12"DComp. size: 4"W x 4-5/8"HMaterial: 22 ga. steelFinish: Gray enamelShipping wt.: 50 lbs. (UPS-able)

All of these bins allow easy access to parts and each compartment is open for speedy inspection and search. Front lips designed to retain parts and are wide enough for stick-on labels. All edges are burr-free.

98-56B / 56 Hole BinLarge compartment size for easier access to bulk parts.Bin size: 35"W x 42"H x 12"DComp. size: 4-3/4"W x 5-1/4"HMaterial: 22 ga. steelFinish: Gray enamelShipping wt.: 110 lbs. (Truck only)

98-BBC / BaseFor storage bins above to raise units 6-1/2". Size: 35-3/8"W x 6-1/2"H x 12"DShipping wt.: 10 lbs.

98-72B / 72 Hole BinAmerica's most popular storage bin. The 72 Hole Bin will accommodate medium to large size parts such as bolts and fittings.Bin size: 35"W x 42"H x 12"DComp. size: 4"W x 4-5/8"HMaterial: 22 ga. steelFinish: Gray enamelShipping wt.: 125 lbs. (Truck only)

98-42B / 42 Hole BinExtra-large compartment size for bulky parts such as pipe fittings.Bin size: 35"W x 42"H x 12"DComp. size: 5-1/2"W x 6"HMaterial: 22 ga. steelFinish: Gray enamelShipping wt.: 100 lbs. (Truck only)

98-40B / 40 Hole BinStack or stand two side-by-side for a 80 hole bin that can be shipped uPS.Bin size: 35"W x 24"H x 12"DComp. size: 4"W x 4-1/8"HMaterial: 22 ga. steelFinish: Gray enamelShipping wt.: 65 lbs. (UPS-able)


Slide Racks for Steel drawers

98-4LR / Large Four drawer Slide Rack

20-1/2"W x 13"D x 14-3/4"H

98-4SRSmall Four drawer Slide Rack

15-1/2"W x 13"D x 10-1/2"H

Note: drawers are not included with racks.

98-BLRLarge Rack Base

Raises rack 18" above floor.

98-6SR Small Six drawer Slide Rack

15-1/4"W x 11-3/4"D x 16-5/16"H


98-dL6V - LARGe VeRTICAL 6 COMPT.

98-dL12 - LARGe 12 COMPARTMenT98-dS12 - SMALL12 COMPARTMenT

98-dL6H - LARGe HORIZOnTAL, 6 COMPT.98-dL16 - LARGe 16 COMPARTMenT98-dS16 - SMALL 16 COMPARTMenT

98-dL20 LARGe, 20 COMPARTMenT98-dS20 SMALL, 20 COMPARTMenT

98-dL24 LARGe 24 compartment98-dS24 SMALL 24 compartment

98-AdL - LARGe adjustable, 8 dividers98-AdS - SMALL adjustable, 8 dividers

98-dL21 LARGe, 21 compartment98-dS21 SMALL, 21 compartment

98-dL32 - LARGe 32 COMPARTMenT

Steel Parts drawersPerfect for small screws and fittings. Gray baked-on enamel finish. Durable 24 gauge steel shell. Impact resistant plastic tray inserts resist rust and corrosion. Easy-to-scoop compartments have no seams to lose small parts. Built for years of rugged use. Each drawer provided with strong steel handle and a secure lid latch for job-site transport.

SMALL dRAWeRS (98-DS24 shown above)

SIzE: 2"H x 9-3/8"D x 13-3/8"WWill fit slide racks 98-4SR, 98-6SR

LARGe dRAWeRS (98-DL24 shown above)

SIzE: 3"H x 12"D x 18"WWill fit slide rack #98-4LR

(EXTRA DRAwER DIvIDERS: LARGE #98-121, SMALL #98-217)


Steel Cabinets With Adjustable dividers

feATureSQuality 24 gauge steel construction thru-out Shipped fully assembled Smooth drawer face for adhesive labels Gray baked-on enamel finish

Stackable for expandability Positive drawer stops prevent accidental removal Partition slots on 1" centers Each cabinet supplied with two dividers per drawer

Individual drawers available upon special request

98-24d / 24 drawer CabinetCabinet size: 14-1/4"H x 11-1/2"D x 34"WDrawer inside dimensions:2-3/4"H x 5-3/8"W x 11-1/4"DShipping wt.: 60 lbs.No. of Dividers: 48

98-18d / 18 drawer CabinetCabinet size: 10-3/4"H x 11-1/2"D x 34" WDrawer inside dimensions:2-3/4"H x 5-3/8"W x 11-1/4"DShipping wt.: 50 lbs.No. of Dividers: 36

98-6d / 6 drawer CabinetCabinet size: 4"H x 11-1/2"D x 34"WDrawer inside dimensions:2-3/4"H x 5-3/8"W x 11-1/4"DShipping wt.: 21 lbs.

No. of Dividers: 1298-010 / Cabinet dividers

Size: 2-1/2" x 5-3/16"Steel divider for any of the above

steel cabinets.

98-Bd / Steel Cabinet BaseSize: 15H" x 34"W x 11-3/4"D

Raises steel cabinets 15" above floor. Use with any of the above.

(Not pictured)


Stackable Plastic Bins

These heavy duty, unbreakable stacking bins are waterproof, oil and chemical resistant. Can be taken directly to work areas for assembly operations. Molded slots for ID labels. Reinforcement ribs. Curved scoop bottom. Color: blue.

Part Outside dimensions Pkgno. Length Width Height Qty98-001 ...... 5 3/8" ............ 4 1/8" ............. 3" ..............2498-002 ...... 7 3/8" ............ 4 1/8" ............. 3" ..............2498-003 ..... 10 7/8" ........... 5 1/2" ............. 5" ..............1298-004 ..... 10 7/8" .............11" .............. 5" ................698-005 ..... 14 3/4" ........... 8 1/4" ............. 7" ..............1298-006 ..... 14 3/4" .............16" .............. 7" ................6

Corrugated BinsStore and locate parts fast and efficiently. Carry parts directly to work area. Reduce and control inventories, shorten assembly time and minimize parts handling. Rugged 200 pound test corrugated fiberboard bins offer exceptional strength and durability. May be placed back-to-back to fit 24" or 36" wide shelving. White on one side only. Shipped flat. Easy to assemble.

Part Outside dimensions Pkgno. Length Width Height Qty98-007 ........12" ................2" .............4 1/2" ..........10098-009 ........12" ................4" .............4 1/2" ..........10098-013 ........12" ................6" .............4 1/2" ..........10098-015 .......12" ................8" .............4 1/2" ..........10098-011 .........12" ...............10" ............4 1/2" ..........100

(98-011 accommodates 8½" x 11" literature, forms, etc.)98-012 ........18" ................4" .............4 1/2" ..........100

Miscellaneous Storage Units

Key Stock RackHolds 10 sizes.Size: 10-1/2"W x 6"H x 5"D. Compartment size: 1-1/2" x 1-1/2". Shipping wt. 3 lbs. Part no. 20-140

Key Stock not included.

Welding Rod CabinetUsed for welding rods, keystock and long bolts up to 18 inches long. Compartment measures 4"H x 5¼"W. Cabinet size is 18½"D x 8"H x 16"W. Part no. 98-WRC

Threaded Rod Storage RackThis rack organizes and pro-tects up to 6' long rods, round bars and other steel stock. Has eighteen openings (2-1/16" dia.) Size: 24-1/8"W x 24"H x 6-7/8"D. Made from heavy gauge cold rolled steel. Comes assembled. Color is gray. Part no. 99-112

(Threaded Rods not included)

Wire Spool RacksConvenient for dispensing wire. Holds spools up to 10" in diameter. Unit is easy to assemble and wall mountable. Gray baked enamel finish. Shipping weight: 25 lbs. Size: 26-1/8"W x 37-1/8"H x 6"D Part no. 98-WSR-4

Aerosol Storage CabinetDivided into four sections. Includes lock and two keys. Easily wall mounted using keyholes provided. Gray baked enamel finish. Ship-ping wt. 30 lbs. Size: 34"W x 22"H x 8-1/2"D. Part no. 98-343


13-993, 18 compartment

13-995, 6 compartment 13-996, 12 compartment

13-994, 12 compartment

Outside dimensions: 8-1/2"W x 4-1/2"D x 1-3/8"H




Convenient and inexpensive! Protects small components, precision parts, electronic parts, hardware, office supplies, pins, needles, small tools, labels, sportsmens accessories, precision parts.

Molded polystyrene construction. Permanently molded-in compartments. Made in U.S.A.

Clear Styrene Boxes

Great for small parts storage!

full mpi catalog

Documents