fs8600 v3 command

Upload: lenin-kumar

Post on 07-Jul-2018

223 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/18/2019 FS8600 v3 Command

    1/224

    Dell Compellent FluidFS

    Version 3.0

    FS8600 Appliance

    CLI Reference Guide

  • 8/18/2019 FS8600 v3 Command

    2/224

    FluidFS Version 3.0 FS8600 Appliance CLI Reference GuideDocument Number: 680‐089‐002

    Notes, Cautions, and Warnings

    Copyright Notice and Trademarks© 2013 Dell Inc.

    Trademarks used in this text: Dell™, the Dell logo, and Compellent™ are trademarks of Dell Inc. Other trademarks and trade names may  be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

    Contacting Dell Technical Support ServicesFor technical support, go to support.dell.com/compellent/.

    Revision Date Description

    A October 2013 Initial release in support of FluidFS version 3.0.

    Note:   Indicates important information that helps you complete a procedure.

    Caution:   Indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

    Warning:  Indicates that failure to follow directions could result in property damage, personal injury, or death.

    http://support.dell.com/compellenthttp://support.dell.com/compellent

  • 8/18/2019 FS8600 v3 Command

    3/224

    Dell Compellent iii

    Contents

    1 CLI Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

    About the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

    CLI Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

    CLI Command Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

    Navigating the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

    Entering Commands in the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

    Enter a Command by Navigating One Menu at a Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

    Enter a Single Line Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

    CLI Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

    Getting Help on the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

    Accessing the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

    Connect to the FluidFS Cluster CLI Using a VGA Console . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

    Connect to the FluidFS Cluster CLI Through SSH Using a Password . . . . . . . . . . . . . . . . . 8

    Connect to the FluidFS Cluster CLI Through SSH Without Using a Password . . . . . . . . . . 9

    2 CLI Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

    Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

    access-control domains-list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

    access-control users-list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

    access-control groups-list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

    access-control active-directory status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

    access-control active-directory join . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14access-control active-directory leave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

    access-control local-users list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

    access-control local-users view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

    access-control local-users view-groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

    access-control local-users add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

  • 8/18/2019 FS8600 v3 Command

    4/224

    iv FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

    Contents

    access-control local-users change-password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

    access-control local-users edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

    access-control local-users delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

    access-control local-users restore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

    access-control local-users without-password-complexity-checks add-user . . . . . . . . . . . . 20access-control local-users without-password-complexity-checks change-password . . . . 20

    access-control local-groups list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

    access-control local-groups view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

    access-control local-groups add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

    access-control local-groups add-local-user . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

    access-control local-groups delete-local-user . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

    access-control local-groups add-external-user . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

    access-control local-groups delete-external-user . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

    access-control local-groups delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

    access-control local-groups restore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

    access-control users-database view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

    access-control users-database edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

    access-control mapping policy view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

    access-control mapping policy edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

    access-control mapping manual list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

    access-control mapping manual view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

    access-control mapping manual add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30access-control mapping manual edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

    access-control mapping manual delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

    access-control mapping manual restore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

    access-control available-backups list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

    events list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

    events view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

    hardware NAS-appliances list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

    hardware NAS-appliances view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

    hardware NAS-appliances create-cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

    hardware NAS-appliances add-appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

    hardware NAS-appliances join-appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

    hardware NAS-appliances attach-controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

    hardware NAS-appliances detach-controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

    hardware NAS-appliances reboot-controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

  • 8/18/2019 FS8600 v3 Command

    5/224

    Dell Compellent v

    Contents

    hardware NAS-appliances blink-appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

    hardware NAS-appliances delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

    hardware NAS-appliances status-list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

    hardware NAS-appliances status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

    hardware NAS-appliances status-mesh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40hardware NAS-appliances discovery list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

    hardware NAS-appliances discovery view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

    hardware fabrics status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

    hardware fabrics status-list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

    hardware fabrics iSCSI-portals view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

    hardware fabrics iSCSI-portals enable-authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

    hardware fabrics iSCSI-portals disable-authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

    hardware fabrics iSCSI-portals rediscover-all . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

    hardware fabrics iSCSI-portals add-IPv4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

    hardware fabrics iSCSI-portals add-IPv6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

    hardware fabrics iSCSI-portals delete-IPv4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

    hardware fabrics iSCSI-portals delete-IPv6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

    hardware fabrics iSCSI list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

    hardware fabrics iSCSI view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

    hardware fabrics iSCSI add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

    hardware fabrics iSCSI edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

    hardware fabrics iSCSI delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50hardware fabrics fc list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

    hardware fabrics fc view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

    hardware storage-subsystem view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

    hardware storage-subsystem rescan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

    hardware storage-subsystem create-NAS-pool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

    hardware storage-subsystem expand-NAS-pool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

    hardware storage-identifiers list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

    hardware storage-identifiers view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

    hardware restore-configuration-from-storage restore-NAS-volumes . . . . . . . . . . . . . . . . . . 54

    hardware restore-configuration-from-storage restore-configuration . . . . . . . . . . . . . . . . . . . 54

    hardware restore-configuration-from-storage list-lost-volumes . . . . . . . . . . . . . . . . . . . . . . . 55

    hardware restore-configuration-from-storage restore-lost-volumes . . . . . . . . . . . . . . . . . . . 55

    hardware destroy-cluster destroy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

    hardware destroy-cluster destroy-and-change-model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

  • 8/18/2019 FS8600 v3 Command

    6/224

    vi FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

    Contents

    networking subnets list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

    networking subnets view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

    networking subnets add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

    networking subnets edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

    networking subnets delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59networking client-network-interface view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

    networking client-network-interface edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

    networking default-gateway view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

    networking default-gateway add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

    networking default-gateway edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

    networking default-gateway delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

    networking static-routes list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

    networking static-routes view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

    networking static-routes add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

    networking static-routes edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

    networking static-routes delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

    networking DNS view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

    networking DNS edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

    networking client-load-balancing list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

    networking client-load-balancing view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

    networking client-load-balancing mass-failback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

    networking client-load-balancing mass-rebalance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66networking client-load-balancing move . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

    networking client-load-balancing pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

    networking client-load-balancing unpin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

    networking active-CIFS-sessions list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

    networking active-CIFS-sessions view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

    networking active-CIFS-sessions logoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

    networking active-ndmp-sessions list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

    networking active-ndmp-sessions view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

    networking active-ndmp-sessions logoff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

    networking monitor external-servers-states list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

    networking monitor external-servers-states view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

    networking monitor performance-per-node last-day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

    networking monitor performance-per-node last-week . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

    networking monitor performance-per-node last-month . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

  • 8/18/2019 FS8600 v3 Command

    7/224

    Dell Compellent vii

    Contents

    networking monitor performance-per-node last-year . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

    networking monitor performance-summary read last-day . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

    networking monitor performance-summary read last-week . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

    networking monitor performance-summary read last-month . . . . . . . . . . . . . . . . . . . . . . . . . . 78

    networking monitor performance-summary read last-year . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79networking monitor performance-summary write last-day . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

    networking monitor performance-summary write last-week . . . . . . . . . . . . . . . . . . . . . . . . . . 80

    networking monitor performance-summary write last-month . . . . . . . . . . . . . . . . . . . . . . . . . . 81

    networking monitor performance-summary write last-year . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

    networking monitor performance-summary IOPS last-day . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

    networking monitor performance-summary IOPS last-week . . . . . . . . . . . . . . . . . . . . . . . . . . 83

    networking monitor performance-summary IOPS last-month . . . . . . . . . . . . . . . . . . . . . . . . . . 83

    networking monitor performance-summary IOPS last-year . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

    system time view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

    system time edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

    system time available-timezones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

    system time view-current-time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

    system time set-current-time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

    system data-protection antivirus-scanners view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

    system data-protection antivirus-scanners add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

    system data-protection antivirus-scanners delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

    system data-protection NDMP-configuration view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88system data-protection NDMP-configuration edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

    system data-protection NDMP-configuration update-user . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

    system data-protection cluster-partnerships list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

    system data-protection cluster-partnerships add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

    system data-protection cluster-partnerships edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

    system data-protection cluster-partnerships delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

    system data-protection cluster-partnerships update-protocol-version . . . . . . . . . . . . . . . . . 92

    system mail-configuration view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

    system mail-configuration set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

    system mail-configuration enable-authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

    system mail-configuration disable-authentication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

    system administrators list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

    system administrators view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

    system administrators add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

  • 8/18/2019 FS8600 v3 Command

    8/224

    viii FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

    Contents

    system administrators edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

    system administrators delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

    system SNMP view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

    system SNMP set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

    system SNMP update-filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101system licenses list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

    system licenses view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

    system licenses delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

    system licenses load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

    system software-updates list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

    system software-updates view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

    system software-updates upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

    system software-updates approve-eula . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

    system software-updates eula-approval-status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

    system internal file-system service-mode view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

    system internal file-system service-mode set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

    system internal file-system domains list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

    system internal file-system domains view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

    system internal file-system background-processes list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

    system internal file-system background-processes view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

    system internal file-system background-processes configuration data-reduction view . . . 109

    system internal file-system background-processes configuration data-reduction set . . . . 109system internal file-system background-processes configuration health-scan view . . . . . 110

    system internal file-system background-processes configuration health-scan set . . . . . . . 110

    system internal file-system internal-storage-reservation view . . . . . . . . . . . . . . . . . . . . . . . . . 111

    system internal security support-access view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

    system internal security support-access enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

    system internal security support-access disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

    system internal security support-access change-password . . . . . . . . . . . . . . . . . . . . . . . . . . 112

    system internal security management-access restriction-status . . . . . . . . . . . . . . . . . . . . . . 113

    system internal security management-access restrict . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

    system internal security management-access unrestrict . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

    system internal security management-access management-subnet view . . . . . . . . . . . . . . 114

    system internal security management-access management-subnet add . . . . . . . . . . . . . . . 114

    system internal security management-access management-subnet edit . . . . . . . . . . . . . . . 115

    system internal security management-access management-subnet delete . . . . . . . . . . . . . 115

  • 8/18/2019 FS8600 v3 Command

    9/224

    Dell Compellent ix

    Contents

    system internal security FTP configuration view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

    system internal security FTP configuration enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

    system internal security FTP configuration disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

    system internal security ui-configuration view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

    system internal security ui-configuration edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117system internal internal-network view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

    system internal internal-network edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

    system internal cluster-name view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

    system internal cluster-name set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

    system internal language view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

    system internal language set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

    system internal diagnostics list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

    system internal diagnostics view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

    system internal diagnostics run-general-diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

    system internal diagnostics run-client-connectivity-diagnostic . . . . . . . . . . . . . . . . . . . . . . . . 121

    system internal diagnostics run-file-system-diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

    system internal diagnostics run-cifs-file-accessibility-diagnostic . . . . . . . . . . . . . . . . . . . . . . 122

    system internal diagnostics run-nfs-file-accessibility-diagnostic . . . . . . . . . . . . . . . . . . . . . . 123

    system internal diagnostics run-cifs-and-nfs-diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

    system internal diagnostics run-performance-diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

    system internal diagnostics run-network-diagnostic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

    system internal system-configuration-state view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125system internal system-configuration-state installation-finished . . . . . . . . . . . . . . . . . . . . . . . 126

    system internal system-configuration-state hardware-replacement-start . . . . . . . . . . . . . . 126

    system internal system-configuration-state hardware-replacement-finished . . . . . . . . . . . 126

    system background-operations running . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

    system background-operations recent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

    system background-operations wait-to-finish . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

    system EM recipients view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

    system EM recipients edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

    NAS-volumes view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

    NAS-volumes add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

    NAS-volumes delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

    NAS-volumes list space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

    NAS-volumes list data-reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

    NAS-volumes list snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

  • 8/18/2019 FS8600 v3 Command

    10/224

    x FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

    Contents

    NAS-volumes list clones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

    NAS-volumes list capacity-over-time last-day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

    NAS-volumes list capacity-over-time last-week . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

    NAS-volumes list capacity-over-time last-month . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

    NAS-volumes list capacity-over-time last-year . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137NAS-volumes edit name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

    NAS-volumes edit owner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

    NAS-volumes edit space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

    NAS-volumes edit interoperability-policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

    NAS-volumes edit data-reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

    NAS-volumes edit advance-settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

    NAS-volumes clone volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142

    NAS-volumes clone file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142

    NAS-volumes NAS-pool view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143

    NAS-volumes NAS-pool configuration view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143

    NAS-volumes NAS-pool configuration edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

    NAS-volumes NAS-pool capacity-overtime last-day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

    NAS-volumes NAS-pool capacity-overtime last-week . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

    NAS-volumes NAS-pool capacity-overtime last-month . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

    NAS-volumes NAS-pool capacity-overtime last-year . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

    NAS-volumes NFS-exports list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

    NAS-volumes NFS-exports view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148NAS-volumes NFS-exports create-folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

    NAS-volumes NFS-exports add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149

    NAS-volumes NFS-exports edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

    NAS-volumes NFS-exports delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

    NAS-volumes NFS-exports add-acl for-all-clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

    NAS-volumes NFS-exports add-acl for-single-client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

    NAS-volumes NFS-exports add-acl for-clients-in-subnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

    NAS-volumes NFS-exports add-acl for-clients-in-netgroup . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

    NAS-volumes NFS-exports delete-acl for-all-clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154

    NAS-volumes NFS-exports delete-acl for-single-client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154

    NAS-volumes NFS-exports delete-acl for-clients-in-subnet . . . . . . . . . . . . . . . . . . . . . . . . . . . 155

    NAS-volumes NFS-exports delete-acl for-clients-in-netgroup . . . . . . . . . . . . . . . . . . . . . . . . . 156

    NAS-volumes NFS-exports general-settings view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156

    NAS-volumes NFS-exports general-settings NFSv4-enable . . . . . . . . . . . . . . . . . . . . . . . . . . . 156

  • 8/18/2019 FS8600 v3 Command

    11/224

    Dell Compellent xi

    Contents

    NAS-volumes NFS-exports general-settings NFSv4-disable . . . . . . . . . . . . . . . . . . . . . . . . . . . 157

    NAS-volumes CIFS-shares list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157

    NAS-volumes CIFS-shares view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158

    NAS-volumes CIFS-shares create-folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158

    NAS-volumes CIFS-shares add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159NAS-volumes CIFS-shares edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160

    NAS-volumes CIFS-shares delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161

    NAS-volumes CIFS-shares home-share view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161

    NAS-volumes CIFS-shares home-share enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162

    NAS-volumes CIFS-shares home-share disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162

    NAS-volumes CIFS-shares home-share edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163

    NAS-volumes CIFS-shares general-settings view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163

    NAS-volumes CIFS-shares general-settings edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164

    NAS-volumes quota rules users list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164

    NAS-volumes quota rules users view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165

    NAS-volumes quota rules users add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166

    NAS-volumes quota rules users edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167

    NAS-volumes quota rules users delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167

    NAS-volumes quota rules users delete-by-user-ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168

    NAS-volumes quota rules users default view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168

    NAS-volumes quota rules users default edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

    NAS-volumes quota rules users-in-groups list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170NAS-volumes quota rules users-in-groups view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170

    NAS-volumes quota rules users-in-groups add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

    NAS-volumes quota rules users-in-groups edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172

    NAS-volumes quota rules users-in-groups delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173

    NAS-volumes quota rules users-in-groups delete-by-group-ID . . . . . . . . . . . . . . . . . . . . . . . . 173

    NAS-volumes quota rules groups list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173

    NAS-volumes quota rules groups view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174

    NAS-volumes quota rules groups add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175

    NAS-volumes quota rules groups edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176

    NAS-volumes quota rules groups delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177

    NAS-volumes quota rules groups delete-by-group-ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177

    NAS-volumes quota rules groups default view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178

    NAS-volumes quota rules groups default edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178

    NAS-volumes quota usage users list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179

  • 8/18/2019 FS8600 v3 Command

    12/224

    xii FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

    Contents

    NAS-volumes quota usage users view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

    NAS-volumes quota usage users view-effective-rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

    NAS-volumes quota usage groups list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181

    NAS-volumes quota usage group view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182

    NAS-volumes quota usage group view-effective-rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182NAS-volumes snapshots list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

    NAS-volumes snapshots view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

    NAS-volumes snapshots add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184

    NAS-volumes snapshots rename . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184

    NAS-volumes snapshots delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

    NAS-volumes snapshots restore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

    NAS-volumes snapshots set-expiry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186

    NAS-volumes snapshots disable-expiry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186

    NAS-volumes snapshots schedules list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187

    NAS-volumes snapshots schedules view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187

    NAS-volumes snapshots schedules add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188

    NAS-volumes snapshots schedules edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189

    NAS-volumes snapshots schedules delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190

    NAS-volumes replication list-source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190

    NAS-volumes replication list-destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191

    NAS-volumes replication view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192

    NAS-volumes replication demote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192NAS-volumes replication promote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

    NAS-volumes replication enable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

    NAS-volumes replication disable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194

    NAS-volumes replication start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194

    NAS-volumes replication connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

    NAS-volumes replication disconnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

    NAS-volumes replication schedules list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196

    NAS-volumes replication schedules view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196

    NAS-volumes replication schedules add . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197

    NAS-volumes replication schedules edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198

    NAS-volumes replication schedules delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199

    NAS-volumes configuration-backups list-available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200

    NAS-volumes configuration-backups view-available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200

    NAS-volumes configuration-backups restore-configuration . . . . . . . . . . . . . . . . . . . . . . . . . . 201

  • 8/18/2019 FS8600 v3 Command

    13/224

    Dell Compellent xiii

    Contents

    3 CLI Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203

    Installing a FluidFS Cluster Using the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203

    Adding a NAS Appliance to a FluidFS Cluster Using the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . 205

  • 8/18/2019 FS8600 v3 Command

    14/224

    xiv FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

    Contents

  • 8/18/2019 FS8600 v3 Command

    15/224

    Dell Compellent xv

    Preface

    This preface introduces the Dell Compellent FluidFS for FS8600 Appliance documentation. It provides the purpose and audience of this document, as well as a list of related publications.

    PurposeThe Dell Compellent FluidFS Version 3.0 FS8600  Appliance CLI  Reference Guide provides information about the FS8600 appliance command line interface. The target audience for this document is customers.

    Related PublicationsThe following documents comprise the core Dell Compellent FluidFS for FS8600 Appliance documentation set:

      Dell Compellent FluidFS Version 3.0 FS8600  Appliance Pre‐Deployment Requirements 

    Provides a checklist that assists in preparing to deploy an FS8600 appliance prior to a Dell Compellent installer or certified  business partner arriving on‐site to perform an FS8600 appliance installation. The target audience for this document is Dell Compellent installers and certified  business partners who perform FS8600 appliance installations.

      Dell Compellent FluidFS Version 3.0 FS8600  Appliance Deployment Guide 

    Provides information about deploying an FS8600 appliance, including cabling the appliance to the Storage Center(s) and the network, and deploying the appliance using the Enterprise Manager software. The target audience for this document is Dell Compellent installers and certified  business partners who perform FS8600 appliance installations.

      Dell Compellent FluidFS Version 3.0 FS8600  Appliance  Administrator’s Guide 

    Provides information about using the Enterprise Manager software to manage FS8600 appliances, and provides information about FS8600 appliance monitoring and troubleshooting. The target audience for this document is customers.

      Dell Compellent FS8600  Appliance FluidFS Version 3.0 Software Update Guide 

    Provides information about upgrading the FluidFS software. The target audience for this document is customers.

      Dell Compellent

     FluidFS

     Version

     3.0

     FS8600

      Appliance

     Release

     Notes 

    Provides information about FluidFS releases, including new features and enhancements, open issues, and resolved issues. The target audience for this document is customers.

      Dell Compellent FS8600  Appliance Service Guide 

    Provides information about FS8600 appliance hardware, system component replacement, and system troubleshooting. The target audience for this document is Dell Compellent installers and certified 

     business partners who perform FS8600 appliance hardware service.

  • 8/18/2019 FS8600 v3 Command

    16/224

    xvi FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

      Dell NAS  Appliance SFP+ Replacement Procedure 

    Provides information about replacing SFP+ transceivers on an inactive system. The target audience for this document is Dell Compellent installers and certified  business partners who perform FS8600 appliance hardware service.

      Dell Compellent Enterprise  Manager Installation Guide 

    Provides 

    information 

    about 

    installing 

    and 

    configuring 

    the 

    Enterprise 

    Manager 

    Data 

    Collector 

    and 

    Enterprise Manager Client. The target audience for this document is customers.

      Dell Compellent Enterprise  Manager  Administrator’s Guide 

    Describes how to use the Enterprise Manager software to manage Storage Center and FS8600 appliances. The target audience for this document is customers.

      Dell Compellent Enterprise  Manager Release Notes 

    Provides information about Enterprise Manager releases, including new features and enhancements, open issues, and resolved issues. The target audience for this document is customers.

  • 8/18/2019 FS8600 v3 Command

    17/224

    Dell Compellent 1

    1 CLI Overview

    This section contains an overview of the FluidFS cluster command line interface.

    ContentsAbout the CLI   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1

    CLI Menus   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1

    CLI Command Syntax   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5

    Navigating the CLI   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

    Entering Commands in the CLI   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

    CLI Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7

    Getting Help on the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7

    Accessing the CLI   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8

    About the CLIThe command line interface (CLI) provides a comprehensive set of commands for managing the FluidFS cluster. The CLI allows you to perform the same management 

    operations as

     the

     Enterprise

     Manager

     Client,

     as

     well

     as

     operations

     that

     can

      be

     performed

     

    only from the CLI.

    CLI MenusCLI commands are organized using menus and submenus. Menus group related CLI commands. The following table lists the CLI menus that are available.

  • 8/18/2019 FS8600 v3 Command

    18/224

    Chapter 1 CLI Overview

    2 FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

    Menu Submenus Description

    access‐control     active‐directory

      local‐users

      without‐password‐complexity‐checks

      local‐groups

      users‐database

      mapping

      policy

      manual

      available‐ backups

    Use this menu to manage local and external users, user groups, and user mapping policies.

    events Use this menu to monitor FluidFS cluster events.

    hardware     nas‐appliances

      discovery   fabrics

      iscsi‐portals

      iscsi

      fc

      storage‐subsystem

      storage‐identifiers

      restore‐configuration‐from‐storage

      destroy‐cluster

    Use this menu to manage fabrics, NAS appliances, the NAS pool, and the storage subsystem; create and destroy a FluidFS cluster; and restore a configuration from storage.

  • 8/18/2019 FS8600 v3 Command

    19/224

    CLI Menus

    Dell Compellent 3

    networking     subnets

      client‐network‐interface

      default‐gateway

      static‐routes

      DNS

      client‐load‐ balancing

      active‐CIFS‐sessions

      active‐ndmp‐sessions

      monitor

      external‐servers‐states

      performance‐per‐node

      performance‐summary

      read

      write   IOPS

    Use this menu to manage subnets, the default gateway, static routes, DNS, and client load  balancing; view CIFS and NDMP sessions; and monitor performance.

    Menu Submenus Description

  • 8/18/2019 FS8600 v3 Command

    20/224

    Chapter 1 CLI Overview

    4 FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

    system     time

      data‐protection

      antivirus‐scanners

      NDMP‐configuration

      cluster‐partnerships

      mail‐configuration

      administrators

      SNMP

      licenses

      software‐updates

      internal

      file‐system

      service‐mode

      domains   background‐processes

      configuration

      data‐reduction

      health‐scan

      internal‐storage‐reservation

      security

      support‐access

      management‐access

      management‐subnet

      FTP

      configuration

      ui‐configuration

      internal‐network

      cluster‐name

      language

      diagnostics

      system‐configuration‐state

      background‐

    operations   EM

      recipients

    Use this menu to manage the system time, data protection, administrators, SNMP, licensing, software updates, the file system, the support account, secured management, FTP, and the 

    FluidFS cluster name; run diagnostics; and monitor  background operations.

    Menu Submenus Description

  • 8/18/2019 FS8600 v3 Command

    21/224

    CLI Command Syntax

    Dell Compellent 5

    CLI Command SyntaxThe structure of a CLI command is:

    CLI>  

     

     

     -

    Where:

      CLI> — The command prompt where you type the command

       — The name of the main menu

       —The name of one or more submenus (separated with a space). Certain menus have multiple levels of submenus.

       — The name of the command that you want to execute

    NAS‐volumes     list

      capacity‐over‐time

      edit

      clone

      NAS‐pool

      configuration

      capacity‐overtime

      NFS‐exports

      add‐acl

      delete‐acl

      general‐settings

      CIFS‐shares

      home‐share

      general‐settings   quota

      rules

      users

      default

      users‐in‐groups

      groups

      default

      usage

      users

      groups

      snapshots

      schedules

      replication

      schedules

      configuration‐ backups

    Use this menu to manage NAS volumes, clone volumes, NFS exports, CIFS shares, quota rules, snapshots, replication, and configuration 

     backups; and monitor quota usage.

    Menu Submenus Description

  • 8/18/2019 FS8600 v3 Command

    22/224

    Chapter 1 CLI Overview

    6 FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

       — The arguments (separated with a space) that you must enter with the command to execute the command successfully. You may have none or multiple arguments depending on the command that you want to execute. You must enter the arguments for a command in the correct order.

       — The options (separated with a space) that you have available for a command. You may have none or multiple options depending on the command that 

    you want

     to

     execute

     and

     you

     may

     need

     to

     enter

     at

     least

     one

     of

     the

     available

     options

     for

     

    the command to execute successfully. Each option for a command must  be preceded  by a hyphen (‐).

    Navigating the CLIWhen navigating the CLI, the following commands are available throughout the system:

      back — Moves  back one level in the menu hierarchy

      main — Returns to the main menu

      help — Lists information about currently available menus, commands, arguments, and options

      history —

     Lists

     previously

     executed

     commands

      exit or quit — Exits the CLI

      find — Lists menus and commands containing the text you supply

    Entering Commands in the CLIThere are two ways to enter commands in the CLI:

      Enter a command  by navigating one menu at a time

      Enter a single line command

    Tab completion is available in the CLI. You can press the Tab key to automatically complete a menu, submenu, command, or option name after entering a unique portion of the name. This can  be useful in completing long commands. For example, entering net and then pressing Tab is the same as entering networking. If there are several items that  begin with those characters, the CLI displays the possibilities. For example, entering  NAS-volumes n and then pressing Tab displays  NAS-pool and  NFS-exports.

    Press Tab again to see the available submenus, commands, and options under the given string. For example, entering events and then pressing Tab twice displays the available events commands: list and view.

    The CLI also lets you abbreviate a command if the abbreviation uniquely identifies the command. For example, the following commands are identical: events list and eventsli.

    Enter a Command by Navigating One Menu at a TimeEnter a command  by navigating through the CLI one menu at a time.

    1   Type the  and press the Enter key. The available submenus and commands under the menu are displayed.

    2   If needed, type the  and press the Enter key. The available submenus and commands under the submenu are displayed.

    3   Repeat Step 2 until you reach the submenu level containing the command that you want to execute.

  • 8/18/2019 FS8600 v3 Command

    23/224

    CLI Output

    Dell Compellent 7

    4   Type   ‐ and press the Enter key. The command is executed.

    Example:

    1   Type access-control and press the Enter key.

    2   Type  mapping and press the Enter key.

    3   Type  manual and press the Enter key.4   Type add NAS jsmith johns -EnableWindowsToUNIXMapping Yes and press the 

    Enter key.

    Enter a Single Line CommandTo enter a single line CLI command:

    Type:     - and press the Enter key. The command is executed.

    Example:

    Type: access-control mapping manual add NAS jsmith johns

    -EnableWindowsToUNIXMapping Yes and press

     the

     Enter

     key.

    CLI OutputDepending on the command, all available output might  be displayed, or  just the  beginning of the output might  be displayed along with the following message describing the options available for navigating the output. 

       % Press Enter for next line Space for next page or ESC

    to stop paging.

    For some commands with lengthy output, the following options are available

      % — Displays the percentage of output displayed

      Enter 

    — Pressing

     Enter

     displays

     the

     next

     line

     of

     output

      Space — Pressing Space displays the next page of output

      ESC 

    — Pressing Esc returns you to a command prompt

    Getting Help on the CLIThe CLI provides online help for menus, commands, arguments, and options. At any time while using the CLI, you can type help to see more information about the available menus, commands, arguments, and options.

    Example 1:

    CLI/access-control/mapping/manual> help

     Available commands:

      list

      view

      add 

      edit

      delete

      restore

  • 8/18/2019 FS8600 v3 Command

    24/224

    Chapter 1 CLI Overview

    8 FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

    Example 

    2:

    CLI/access-control/mapping/manual> help edit

    edit - Modify the mapping rule between a Windows and UNIX user

    Usage: edit [Options]

      Options:

      -EnableWindowsToUNIXMapping

      -EnableUNIXToWindowsMapping

    Parameters:

      WindowsUserDomain - Domain of the Windows user, the available

      domains are displayed by "domains-list" command 

      WindowsUserName - Name of the Windows user

      UNIXUserName - Name of the UNIX user

      EnableWindowsToUNIXMapping - Indicate whether the Windows to

    UNIX mapping is enabled. The optional values are: Yes or No

      EnableUNIXToWindowsMapping - Indicate whether the UNIX to Windows mapping

      is enabled. The optional values are: Yes or No

    Accessing the CLILog on to the CLI using either a VGA console or a secure shell (SSH) session.

    Connect to the FluidFS Cluster CLI Using a VGA ConsoleLog on to the CLI using a VGA console to manage the FluidFS cluster.

    Prerequisites

    Connect a monitor to the NAS controller’s VGA port and connect a keyboard to one of the NAS controller’s USB ports.

    Steps

    1   From the command line, type the following command at the login as prompt:

    cli

    2   Type the FluidFS cluster administrator user name at the login as prompt. The default user name is Administrator.

    3   Type the FluidFS cluster administrator password at the ’s password prompt. The default password is Stor@ge!. You are logged on to the CLI and a Welcome window is displayed, listing the installed FluidFS version and the available commands in the main menu.

    Connect to the FluidFS Cluster CLI Through SSH Using a Password

    Log on

     to

     the

     CLI

     through

     SSH

     to

     manage

     the

     FluidFS

     cluster.

    1   Use either of the following options:

      Using an SSH client, connect to a client VIP. From the command line, type the following command at the login as prompt:

    cli

      Using a UNIX/Linux workstation, type the following command from a prompt:

    ssh cli@ 

  • 8/18/2019 FS8600 v3 Command

    25/224

    Accessing the CLI

    Dell Compellent 9

    2   Type the FluidFS cluster administrator user name at the login as prompt. The default user name is Administrator.

    3   Type the FluidFS cluster administrator password at the ’s password prompt. The default password is Stor@ge!. You are logged on to the CLI and a Welcome window is displayed, listing the installed FluidFS version and the available commands in the main menu.

    Connect to the FluidFS Cluster CLI Through SSH Without Using aPasswordYou can use SSH keys to  bypass the SSH login prompt to manage the FluidFS cluster.

    1   Log on to a UNIX/Linux workstation for which you want to  bypass the SSH login prompt.

    2   From the command line, type the following command:

    ssh-keygen -t rsa

    3   Press Enter at the Enter file in which to save the key (/home/  /.ssh/id_rsa) prompt.

    4   Press Enter

     at

     the

     Enter

     

    passphrase 

    (empty 

    for 

    no 

    passphrase) prompt

     and

     again

     at

     the

     

    Enter same passphrase again prompt. An SSH key is generated at /home/ /.ssh/id_rsa.pub.

    5   Copy the SSH key.

    6   Log on to the CLI using a password.

    7   Type the following command:

    system administrators edit Administrator -SSHKey “ ”

    Now you can use the following command to log on to the FluidFS cluster from the workstation without needing a password: 

    ssh  @ 

    You can also use the following format to run commands from the workstation without 

    needing a password: ssh  @  

     

    See Also

    Connect to the FluidFS Cluster CLI Through SSH Using a Password on page 8

  • 8/18/2019 FS8600 v3 Command

    26/224

    Chapter 1 CLI Overview

    10 FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

  • 8/18/2019 FS8600 v3 Command

    27/224

    Dell Compellent 11

    2 CLI Commands

    This section describes the available FluidFS cluster CLI commands. 

    OverviewIn this section, CLI commands are listed in the order in which they appear in the CLI menu structure. The following information is included for each command:

      Description —

     An

     explanation

     of

     what

     the

     command

     is

     used

     for.

      Format — The syntax used to execute the command.

      Arguments — The arguments (separated with a space) that you must enter with the command to execute the command successfully. You may have none or multiple arguments depending on the command that you want to execute. You must enter the arguments for a command in the correct order.

      Options — The options (separated with a space) that you have available for a command. You may have none or multiple options depending on the command that you want to execute and you may need to enter at least one of the available options for the command to execute successfully. Each option for a command must  be preceded  by a hyphen (‐).

      Example — An example of executing the command to perform a task.

      Output — The system‐generated output resulting from executing the example command. Some commands display output upon completion while others return you to a command prompt and do not display output. Therefore, the commands in this section contain example output only if running the command displays output upon completion.

    access-control domains-listDescription

    Display a list of user and group domains.

    Formataccess-control domains-list

    Example

    Display a list of the current user and group domains:

    CLI > access- cont r ol domai ns- l i st

  • 8/18/2019 FS8600 v3 Command

    28/224

    Chapter 2 CLI Commands

    12 FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

    Options

    Output.-----------------.-----------------.

     | Domain | Type |

     |-----------------|-----------------|

     | | UNIX |

     |-----------------|-----------------|

     | BUILTIN | Local |

     |-----------------|-----------------|

     | idffs1 | Local |

     |-----------------|-----------------|

     | NAS | ActiveDirectory |

     '-----------------'-----------------'

    access-control users-listDescription

    Display a list of users.

    Format

    access-control users-list

     Arguments

    Options

    Example

    Display a list of users in the NAS domain whose user name starts with ca:

    CLI > access- cont r ol user s- l i st NAS ca

    Output.--------.--------.---------------------.---------------.---------.----------.

     | Domain | Name | Id | Primary group | Type | Source |

     |--------|--------|---------------------|---------------|---------|----------|

    Option Description Format

    ‐‐CSV Displays the command output in a comma‐delimited format with a header

    Append  ‐‐CSV to the command

    Note:   To view a list of existing domains, use the command access‐control domains‐list on page 11.

    Argument Description Format

    ‐Domain  User domain Existing user domain

    ‐UserNameStartWith  Prefix of user name Prefix of an existing user name

    Option Description Format

    ‐‐CSV Displays the command output in a comma‐delimited format with a header

    Append  ‐‐CSV to the command

  • 8/18/2019 FS8600 v3 Command

    29/224

    access-control groups-list

    Dell Compellent 13

    | NAS | carl | S-1-5-21-1100376456 | Domain Users | Windows | EXTERNAL |

     | | | -3253980028-2903806 | | | |

     | | | 399-1165 | | | |

     |--------|--------|---------------------|---------------|---------|----------|

     | NAS | carla | S-1-5-21-1100376456 | Domain Users | Windows | EXTERNAL |

     | | | -3253980028-2903806 | | | |

     | | | 399-1114 | | | |

     '--------'--------'---------------------'---------------'---------'----------'|

    access-control groups-listDescription

    Display a list of groups.

    Format

    access-control groups-list

     Arguments

    Options

    Example

    Display a list of groups in the NAS domain whose group name starts with d:

    CLI > access- cont r ol gr oups- l i st NAS d

    Output .--------.----------------------.-----------------------.---------.----------.

     | Domain | Name | Id | Type | Source |

     |--------|----------------------|-----------------------|---------|----------|

     | NAS | DHCP Administrators | S-1-5-21-1100376456-3 | Windows | EXTERNAL |

     | | | 253980028-2903806399- | | |

     | | | 1104 | | |

     |--------|----------------------|-----------------------|---------|----------|

     | NAS | DnsAdmins | S-1-5-21-1100376456-3 | Windows | EXTERNAL |

     | | | 253980028-2903806399- | | |

     | | | 1101 | | |

     |--------|----------------------|-----------------------|---------|----------|

     | NAS | Domain Admins | S-1-5-21-1100376456-3 | Windows | EXTERNAL |

     | | | 253980028-2903806399- | | |

     | | | 512 | | |

    Note:   To view a list of existing domains, use the command access‐control domains‐list on page 11.

    Argument Description Format

    ‐Domain  Group domain Existing group domain

    ‐GroupNameStartWith 

    Prefix of group name Prefix of an existing group name

    Option Description Format

    ‐‐CSV Displays

     the

     command

     output

     in

     a 

    comma‐delimited format with a header

    Append  ‐‐

    CSV to

     the

     command

  • 8/18/2019 FS8600 v3 Command

    30/224

    Chapter 2 CLI Commands

    14 FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

     |--------|----------------------|-----------------------|---------|----------|

     | NAS | Domain Computers | S-1-5-21-1100376456-3 | Windows | EXTERNAL |

     | | | 253980028-2903806399- | | |

     | | | 515 | | |

     |--------|----------------------|-----------------------|---------|----------|

     | NAS | Domain Controllers | S-1-5-21-1100376456-3 | Windows | EXTERNAL |

     | | | 253980028-2903806399- | | |

     | | | 516 | | | |--------|----------------------|-----------------------|---------|----------|

     | NAS | Domain Guests | S-1-5-21-1100376456-3 | Windows | EXTERNAL |

     | | | 253980028-2903806399- | | |

     | | | 514 | | |

     |--------|----------------------|-----------------------|---------|----------|

     | NAS | Domain Users | S-1-5-21-1100376456-3 | Windows | EXTERNAL |

     | | | 253980028-2903806399- | | |

     | | | 513 | | |

     '--------'----------------------'-----------------------'---------'----------'

    access-control active-directory status

    DescriptionDisplay the Active Directory status.

    Format

    access-control active-directory status

    Example

    Display the current Active Directory status:

    CLI > access- cont r ol acti ve- di r ectory st at us

    OutputConfigured = Yes

    Status = Optimal

    Domain = NAS.TEST

    DomainControllers = .-------------------.-----------.------------.

      | Domain Controller | Preferred | Accessible |

      |-------------------|-----------|------------|

      | 172.22.144.2 | Yes | Yes |

      |-------------------|-----------|------------|

      | 172.22.144.3 | Yes | No |

      '-------------------'-----------'------------'

    access-control active-directory joinDescription

    Join the FluidFS cluster to Active Directory.

    Format

    access-control active-directory join  {options}

  • 8/18/2019 FS8600 v3 Command

    31/224

    access-control active-directory leave

    Dell Compellent 15

     Arguments

    Options

    Example

    Join the FluidFS cluster to the Active Directory domain nas.test using the Active Directory

    administrator username Administrator and password password:

    CLI > access- cont r ol acti ve- di r ector y j oi n nas. t est - User name Admi ni st r at or- Password password

    access-control active-directory leaveDescription

    Disconnect the FluidFS cluster from the Active Directory domain.

    Format

    access-control active-directory leave

    Example

    Disconnect the FluidFS cluster from the Active Directory domain:

    CLI > access- cont r ol acti ve- di r ectory l eave

    access-control local-users list

    Description

    Display a list of the local users.

    Format

    access-control local-users list

    Argument Description Format

    Active Directory domain Existing Active Directory domain name

    Option Description Format

    ‐DomainControllers 

    List of preferred Active Directory domain controllers

    Comma‐separated list of existing, preferred Active Directory domain controllers. Host name containing one or more sub names, each separated  by a dot. Each sub name may contain letters, numbers or hyphens,  but may not start nor end in a hyphen.

    ‐Username  Active Directory administrator name

    Existing Active Directory administrator user name

    ‐Password  Active Directory 

    administrator password

    Existing Active Directory administrator 

    password

  • 8/18/2019 FS8600 v3 Command

    32/224

    Chapter 2 CLI Commands

    16 FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

    Options

    ExampleDisplay a list of the current local users:

    CLI > access-cont rol l ocal - users l i st

    Output.---------------.---------------.---------.-----------------------------.

     | User Name | Primary Group | Enabled | Password Is About To Expire |

     |---------------|---------------|---------|-----------------------------|

     | Administrator | Local Users | Yes | No |

     |---------------|---------------|---------|-----------------------------|

     | nobody | nobody_group | No | No |

     |---------------|---------------|---------|-----------------------------|

     | user1 | groupA | Yes | No |

     '---------------'---------------'---------'-----------------------------'

    access-control local-users viewDescription

    Display the settings for a local user.

    Format

    access-control local-users view

     Arguments

    Example

    Display the settings for a local user named user1:

    CLI > access- cont r ol l ocal - user s vi ew user 1

    OutputUser Name = user1

    Primary Group = groupA

    Enabled = Yes

    Password Is About To Expire = NoPassword Never Expires = Yes

    access-control local-users view-groupsDescription

    Display the groups to which a local user belongs.

    Option Description Format

    ‐‐CSV Displays the command output in a comma‐delimited format with a header

    Append  ‐‐CSV to the command

    Argument Description Format

    Local user name Existing local user name

  • 8/18/2019 FS8600 v3 Command

    33/224

    access-control local-users add

    Dell Compellent 17

    Format

    access-control local-users view-groups

     Arguments

    Example

    Display the groups to which a local user named user1 belongs:

    CLI > access- cont r ol l ocal - user s vi ew- gr oups user 1

    OutputUser Nam = user1

    MemberOf = groupA

    access-control local-users addDescription

     Add a local user.

    Format

    access-control local-users add  {options}

     Arguments

    Options

    Example

     Add a local user named user1 with the password Pass123 to the group groupA:

    CLI > access- cont r ol l ocal - users add user1 gr oupA - Password Pass123

    Argument Description Format

    Local user name Existing local user name

    Argument Description Format

    Local user name Contains only the following characters: letters, numbers, 

    underscores, hyphens,

     spaces,

     and

     

    periods. A period can not  be used as the last character of the account name.

    Primary group of the local user (must  be a local group)

    Existing local group name

    Option Description Format

    ‐Password  Local user password Includes at least seven characters and should contain at least three of the following character types: lowercase character, 

    uppercase 

    character, 

    digit, 

    special 

    characters 

    (for example, +, ?, and *)

  • 8/18/2019 FS8600 v3 Command

    34/224

    Chapter 2 CLI Commands

    18 FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

    access-control local-users change-passwordDescription

    Change a local user password.

    Format

    access-control local-users change-password {options}

     Arguments

    Options

    Example

    Change the password for a local user named user1 to Password123:

    CLI > access- cont r ol l ocal - users change-password user 1 - Password Password123

    access-control local-users editDescription

    Modify local user settings.

    Format

    access-control local-users edit {options}

     Arguments

    Options

    Argument Description Format

    Local user name Existing local user name

    Option Description Format

    ‐Password  Local user password Includes at least seven characters and should contain at least three of the following character types: lowercase character, uppercase character, digit, special characters (for example, +, ?, and *)

    Argument Description Format

    Local user name Existing local user name

    Option Description Format

    ‐PrimaryGroupName 

    Primary group of the local user (must  be a local group)

    Existing local group name

    ‐Enabled  Indicate whether the local user is enabled

    Possible values are Yes, No

    ‐PasswordNeverExpires 

    Indicate whether the local user password will never expire

    Possible values are Yes, No

  • 8/18/2019 FS8600 v3 Command

    35/224

    access-control local-users delete

    Dell Compellent 19

    Example

    Move a local user named user1 to the group groupB:

    CLI > access- cont r ol l ocal - users edi t user1 - Pri maryGr oupName gr oupB

    access-control local-users deleteDescriptionDelete a local user.

    Format

    access-control local-users delete

     Arguments

    Example

    Delete a local user named user1:

    CLI > access- cont r ol l ocal - user s del et e user 1

    access-control local-users restoreDescription

    Restore local users from another FluidFS cluster.

    Format

    access-control local-users restore

     Arguments

    Example

    Restore local users from a FluidFS cluster named idffs1:

    CLI > access- cont r ol l ocal - user s restore i df f s1

    Argument Description Format

    Local user name Existing local user name

    Argument Description Format

    FluidFS cluster name from where the local users should 

     be restored

    Existing FluidFS cluster name

  • 8/18/2019 FS8600 v3 Command

    36/224

    Chapter 2 CLI Commands

    20 FluidFS Version 3.0 FS8600 Appliance CLI Reference Guide

    access-control local-users without-password-complexity-checks add-user

    Description

     Add a local user without password-complexity checks.

    Format

    access-control local-users without-password-complexity-checks add-user

    {options}

     Arguments

    Options

    Example

     Add a local user named user1 without password-complexity checks to the group groupA:

    CLI > access- cont r ol l ocal - users wi t hout - password- compl exi t y- checks add- useruser1 gr oupA - Password Pass

    access-control local-users without-password-complexity-checks change-password

    Description

    Change a local user password without password-complexity checks.

    Format

    access-control local-users without-password-complexity-checks change-password

    {options}

    Note:   Before adding a local user without password‐complexity checks, password‐complexity enforcement must  be disabled using the command NAS‐volumes CIFS‐shares general‐settings edit on page 164. 

    Argument Description Format

    Local user

     name Contains

     only

     the

     following

     

    characters: letters, numbers, underscores, hyphens, spaces, and periods. A period can not  be used as the last character of the account name.

    Primary group of the local user (must  be a local group)

    Existing local group name

    Option Description Format

    ‐Password  Local user password Any string

  • 8/18/2019 FS8600 v3 Command

    37/224

    access-control local-groups list

    Dell Compellent 21

     Arguments

    Options

    Example

    Change the password for a local user (without password-complexity checks) named user1

    to Pswd:

    CLI > access- cont r ol l ocal - user s wi t hout - password- compl exi t y- checks change-passwor d user 1 - Passwo