free space optical transmission products
TRANSCRIPT
Free Space Optical Transmission Products
Fiber Optic & Ethernet Network Solutions
Fiber Optic | Copper | Wireless
Fiber in the Sky
The SkyLaser line from ComNet consists of an easy-to-install, pre-packaged point-to-point kit
that contains everything you need to establish a fully symmetrical gigabit Free Space Optical
link. Two kits are available, supporting transmission distances up to 1,500 meters.
Unlike the diminishing throughput of an RF wireless system, SkyLaser units support full duplex
gigabit throughput up to the maximum operating range. There is no degradation in system
performance due to external noise or radar transmission. The industrially hardened units with
gigabit Ethernet interfaces offer the options to be powered by a PoE switch or the supplied
mid-span power injector.
Features › Industrially designed for outdoor
applications - Ruggedized enclosures meet class IP66 dust and water ingress protection standards
› Full 1 Gbps symmetrical throughput over transmission distance
› Very low latency
› Global license-free operation
› Built-in alignment features simplify installation
› Eye-safe Laser operation
› Low power consumption
› IEEE802.3af (PD) compliant PoE support
› SNMP or web based management
› Small size and light weight Control Room
Switch
NetWave® Collecting
Signals
Browser-Based Control Panel
These pre-configured environmentally hardened kits include everything you need to install and connect them.
These Free Space Optical products offer the same practical bandwidth as fiber optic transmission without the installation costs associated with trenching new optical fiber.
The SkyLaser kit transmits a full duplex gigabit Ethernet data stream up to 1500 meters between a pair of aligned SkyLaser Free Space Optical (FSO) devices. An integrated scope supports rough scale alignment with easy-to-read visual indicator LEDs showing the accuracy of the alignment. Fine-scale alignment is then adjusted via the included web server interface at the install location to maximise link performance.
Kit Includes › Two identical Free Space Optic head units in
ruggedized IP66 rated enclosures › Two mounting hardware assemblies › Two PoE Mid-Span Power Injectors
› Units can be powered by an IEEE 802.3af/at compliant PoE switch (not included)
› 5 year warranty
A True Alternative To Fiber Optic Transmission
SkyLaser Free Space Optical Point-to-Point Kits
FSO1GSR FSO1GLR
Operating Temperature Range -20° to +75°C -20º to +75ºC
Power 48 to 56 VDC Mid-span Power Injector (included) or PoE
48 to 56 VDC Mid-span Power Injector (included) or PoE
Transmission Wavelength 850 nm 850 nm
Transmission Power (EIRP) +10 dBm +16 dBm
# of Laser Transmitters 1 4
Receiver Sensitivity -38 dBm -38 dBm
Throughput Full Duplex 1 Gbps Full Duplex 1 Gbps
Operating Distance < 600 m < 1500 m
www.comnet.net
Technical CentreAll SkyLaser topologies are point-to-point due to the nature and operation of the system. It operates similar to a length of cable connecting two Ethernet devices. You can build different topologies using Ethernet switches and using the SkyLaser system to connect the switches.
The units themselves operate as Layer 1 point-to-point Ethernet connecting devices. There are two physical connections on all SkyLaser products. The first is the data connection and the second connection supports the power and out-of-band management interface. This dual port operation provides a further level of security by keeping the data the device is carrying separated from the management port.
Simple Alignment Process
1. Optical Scope Alignment 2. Bar Graph Indication 3. Web Server Fine Tune
Environmental Conditions Like any other wireless system, SkyLaser can be affected by the local environmental conditions. The throughput of the system does not degrade but if the environmental effect is great enough, then the link may drop. The major issue is fog, as the dense water molecules in the sky absorb or refract Laser energy, preventing the transmitted beam from reaching the receiver.
When visibility is low, the SkyLaser performance is still twice that of a human in the same conditions. If, on a fog-bound morning, the human eye is able to see 100 meters the Free Space Optics system would see approximately 200 meters.
To provide high speed redundancy, and provide continuous operation in dense fog, a microwave redundant path can be configured.
Using the ComNet CNGE2+2SMS switch in Redundant SFP (RSFP) mode, the Free Space Optic link acts as the primary and the microwave link the backup with a fail-over time of <1 second. The ComNet NetWave® NWK9[E] kit should be used as the backup microwave link to provide as much throughput as possible.
Network Redundancy
NWK9[E] and CNGE2+2SMS
Typical Applications
Redundant Path Topology
Connection between Multiple Buildings in a City
Link Over an Airport or Large Body of Water (Immune to RF Interference)
Complete Product DocumentationThe complete SkyLaser product line is listed on ComNet’s website, along with data sheets, quick start guides, and intruction manuals.
Scan this QR Code or visit http://bit.ly/SkyLaser-ProductsLIMITED WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FEATURES› Warranty: 1 Year on Battery
2 Years on Solar Panels and Hardware› Solar panels are designed with heavy duty anodized frames that are capable of withstanding high wind pressure, hail and snow load.
› Solar Panels feature outstanding low light performance› Two High Efficiency Multicrystalline Photovoltaic Solar Panels› Weatherproof powder coated steel enclosure that meets NEMA 4X/IP65 weatherproofing standards › Valve Regulated Sealed Lead Acid AGM Battery with great
low temperature performance to -40ºC› 12 VDC Solar Charge Controller with LCD Screen, Intelligent PWM Charging Mode, Adjustable charging and discharging parameters
› 48 VDC Gigabit PoE Injector
› Intelligent Controller Featuring:• Solar Controller Diagnostics LCD Display Supporting Readout of Several Parameters Including System Charge/Discharge and Battery Voltage• Ampere Hours Monitoring of Accumulated Charge/Discharge• Intelligent PWM Charge Controller• Automatic Temperature Compensation• Adjustable Charge/Discharge Control Parameters
• Battery Low Voltage Disconnection• Battery Reverse Connection Protection• Overload/Short Circuit ProtectionAPPLICATIONS› Remote Surveillance Cameras› Wireless Perimeter Surveillance› Temporary Network Surveillance Deployments› Construction Site Network Access
The NetWave® NWKSP2 Solar off the grid power system is designed for applications where
a remote camera or wireless repeater is needed but power is not available or the cost to run
power is too expensive. NetWave Solar is a complete system for providing remote power to
edge communications equipment. The kit includes high quality photovoltaic solar panels,
valve-regulated lead-acid battery, outdoor enclosure, solar charge controller, PoE midspan
injector and mounting hardware. The steel outdoor enclosure has a gasket hinged lid with two
tamper proof locks operated by a special key for high security. The enclosure can be mounted
on a two to four inch pole or wall mounted with the included mounting hardware. The Solar
Panels include a top of pole mount requiring a 4” diameter pole. A side of pole mount is
available as an optional accessory. The included 30A solar charge controller supports an LCD
screen for local diagnostics and system health monitoring, Intelligent PWM charging mode and
battery protection from overcharge and over discharge while the battery provides outstanding
deep cycle and cold weather performance.
NWKSP2
Solar Power Ethernet Kit for Remote Locations15 Watts Continuous Power System with 3 Hours of Peak Sunlight
803.2afBATTERIES INCLUDED
5 YEAR WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FEATURES
› Wire speed 1Gbps full duplex Ethernet channel
› License exempt global operation
› Operating Temperature: -20°C to +75°C (-4°F to +167°F)
› IEEE802.3af PD (6 W standard consumption, 12 W max with
alignment motors)
› Scope alignment for simple installation
› Transparent to Unicast, multicast and Jumbo Frame
› Can be used in High Speed Redundant Ethernet Rings
› SNMP V1 and V2c
› Small form factor
› IP 66 rated solid aluminium enclosure with high quality mount
› Integrated Auto-Tracking software available
› Five Year Warranty
The FSO1GLR is a full duplex 1Gbps Free Space Optical link that supports wire
speed transmission over distances up to 1.5km. The units are designed for
operation in non-conditioned temperature environments and are supplied with
mounting hardware for quick and simple installation. Four integrated LASER
transmitters provide high level availability and the integrated optical alignment
scope provides for rapid deployment and quick course alignment which can then
be fine tuned using high precision electronic stepper motors from any remote
location as required. The technology offers very low latency and high security
making the units a true alternative to fiber. There is no licensing required on a
global basis. An optional autonomous alignment feature is available to provide
automatic compensation for slow building or mast movements due to temperature
fluctuations etc.
The units feature an out-of-band web management interface for increased security
along with SNMP capability for remote diagnosis and monitoring.
Operating as true layer 1 devices the FSO1GLR units are transparent to all Ethernet
protocols and can be used to create any kind of network topology such as linear,
ring and mesh simply by adding standard managed switches to interconnect the
Free Space Optical devices.
Optional heavy duty mounting brackets for many different applications are also
available including wall and pedestal designs.
FSO1GLRFull Duplex 1Gbps Free Space Optical Link
802.3AF PD-20 TO +75ºC
INCLUDED
1 GBPS
Primary FSO Transmission Path
CNGE2+2SMS Switch in RSFP Mode
FSO1GLR
NW9 Access Point
CNGE2+2SMS Switch in RSFP Mode
FSO1GLR
NW9 Client
Secondary Microwave NetWave® Transmission Path
www.comnet.net
5 Year WarrantyComNet offers a complete warranty on materials and workmanship and will repair or replace any SkyLaser product for a period of five years.
The ComNet SkyLaser is a cost-effective alternative to fiber optic transmission, offering symmetrical output of 1 Gbps and lower latency. It’s a true alternative to leasing a private fiber or the labor and materials required for a new fiber installation.
True Fiber Replacement
License Free UseFree Space Optical technology can be installed license free on a global basis, offering unrestricted use in any country and does not have the Operational Costs associated with Licensed microwave technology.
Low Power ConsumptionThe unique design of SkyLaser provides ultra-low power consumption levels. Both units can be powered from IEEE 802.3af compliant PSE devices.
Auto Tracking SoftwareSkyLaser optional Auto Tracking Software is available for users who will experience building movement due to environmental conditions through the course of a day.
Solar Power for FSO Transmission
Optional Accessories
Part No. Description
NWKSP1 15 W continuous power solution with 120 W Solar Panel
NWKSP2 15 W continuous power solution with 240 W Solar Panel
NWKSP3 30 W continuous power solution with 240 W Solar Panel
NWKSP4 30 W Continuous power solution with 480 W Solar Panel
Accessories Enclosure, Controller, Solar Panel, Cables (Included)
Mounting hardware for the Solar Panel and Enclosure (Included)
ComNet Solar kits provide remote power to networked edge equipment, and include a high quality photovoltaic solar panel, outdoor enclosure with gasketed hinged lid and two tamper proof locks, power controller with integrated power injection module, all the mounting hardware and is available with or without sealed lead acid batteries. The equipment can be mounted to a two-to-four inch (five to ten centimeter) pole or to a wall with the included mounting hardware. The included controller protects against overcharge and over discharge while optional high performance batteries give the best available deep discharge and temperature performance.
NWKSP1 NWKSP2 NWKSP3 NWKSP4
Continuous Power 15 W 15 W 30 W 30 W
Peak Sunlight 6 hr 3 hr 6 hr 3 hr
Battery Capacity 110 Ah 110 Ah 220 Ah 220 Ah
Battery Voltage 12 V 12 V 24 V 24 V
Reserve Time¹ 40 hr 40 hr 40 hr 40 hr
PoE Output Voltage 48 V 48 V 48 V 48 V
System Weight with Batteries²
162 lb (73 kg)
179 lb (81 kg)
299 lb (135 kg)
418 lb (189 kg)
[1] Includes 25% battery derating for moderately low temperatures.
[2] Kits are optionally available without batteries included.
The Possibilities Are EndlessThe ComNet SkyLaser FSO products create a network that’s as flexible as you need it to be. There are too many possible applications to show them all in this brochure!
Scan this QR Code to access the SkyLaser FSO Network Application Design Guide, or visit:
http://bit.ly/FSO-Design-Guide
Part No Description
Compatibility
FSO1GSR FSO1GLR
FSOAAL Free space optic autonomous alignment software license. Provides automatic re-alignment of lasers in the event of small movements such as building expansion/contraction. • •
FSOBKT1 Free space optic sidewall mounting bracket • •
FSOBKT2 Free space optic sidewall mounting bracket with 1.5 meter pole • •
FSOBKT3 Free space optic pedestal mounting bracket • •
FSOBKT1 sidewall mounting bracket
FSOBKT2 sidewall mounting bracket with 1.5M pole
FSOBKT3 pedestal mounting bracket
www.comnet.net
3 Corporate Drive | Danbury, CT 06810 | USA T: 1 (203) 796-5300 | F: 1 (203) 796-5303Tech Support: 1 (888) [email protected]
8 Turnberry Park Road Gildersome | Morley | Leeds, UK LS27 7LET: +44 (0)113 307 6400 F: +44 (0)113 253 [email protected]
© 2015 Communication Networks. All Rights
Reserved. “ComNet,” the “ComNet Logo,”
“NetWave” and the “NetWave Logo” are
trademarks of Communication Networks.
ComNetB13 – Rev. 02 Nov 15
Travel light!This brochure and other ComNet product literature is available online. Scan this QR Code with your mobile device, or visit http://bit.ly/ComNet-Product-Literature
Technical SupportThe ComNet Technical Support and Design Center provides pre-sale and post-sale support for Ethernet transmission network and fiber optic system design. The department is staffed by some of the most highly experienced, regarded and recognized experts in the industry. Our direct Design Center phone number is 1-888-678-9427 or you can call 1-203-796-5300 in the US or +44 (0)113 307 6409 throughout Europe and ask for the Design Center, or contact us by E-mail at [email protected]
We’re so confident in the long-term reliability of our products, we back them with a no-questions asked Lifetime Warranty.
Delighting the CustomerComNet’s Customer Care Center is here to provide solutions. Staffed by experienced, knowledgeable, and courteous representatives, the ComNet Customer Care team is there to help. Customer Care representatives are available to answer your questions concerning pricing, product availability, order status, shipping dates, returns, warranty claims and so much more.
Product Training and EducationComNet offers a full curriculum of fiber optic and Ethernet product training designed to educate you to make the right choices when selecting transmission equipment for your projects. Available on-line or in-person, ComNet training qualifies for CEU credit.
www.comnet.net
AGENCY COMPLIANCEAGENCY COMPLIANCEAGENCY COMPLIANCE