Introduction

Thank you for purchasing the BOSSSX-700 Studio EffectsProcessor. In order to take full advantage of the SX-700's functionality,and to enjoy years of trouble-free service, please read this manual carefully.

Before using this unit, carefully read the sections entitled: "USING THE UNIT SAFELY" and "IMPORTANT NOTES" (p, 2-3; p.6). Thesesections provide important information concerning the proper operation of the unit. Additionally, in order to feel assuredthat you have gained a good grasp of every feature provided by your new unit, this manual should be read in its entirety. Themanual should be saved and kept on hand as a convenient reference.

Main FeaturesHigh-qualify Effects

The SX-700's specially designed circuitry creates effectswhich rival the quality of studio equipment costing muchmore.

Assignable Effectors

The effectors can be assigned to various algorithms. Thisgives you the freedom to make and change the sequence ofconnections without the restrictions of fixed algorithms.

A "Harmonist" Generates Four-note Harmony

The on-board Harmonist (real-time harmonizer) makes itpossible to add harmonies of up to four parts to the inputsignal. ..including vocal input!

Built-in RSS (Roland Sound Space)

RSS, which creates stereophonic sonic images in three­dimensional spaces, are to built in to the unit.

Illuminated Buttons

Illuminated panel buttons for each effector not only let youselect and edit the Effectors directly, but also let you know ata glance which Effectors are on.

How to Use This ManualThis manual explains the procedures and functions for nor­mal use, and how to make various settings. It is divided intofive major sections. Read each section as necessary.

At the end of the manual an alphabetical index is provided.If you have questions about operation, refer to the index.

Section 1 Try outthe SX-700

This section explains the basic setup and operation of the SX­700, such asconnecting external devices and selecting effectsettings stored in memory.

Section 2 Modifying Various settings

This section explains how to modify effect settings. Read thissection when you wish to change the settings of variousfunctions.

Section 3 Effect Guide

This section explains the functions of the effect parameters.

Section 4 Using MIDI

This section explains how external MIDI devices can be usedto control the SX-700, and how data can be transmitted andreceived via MIDI. Readthis section when you wish to usetheMIDI functions of the SX-700.

Section 5 Appendix

This section contains information about matters such asfactory-default settings and what to do when the SX-700doesn't work as expected.

Copyright © 1996 BOSS Corporation

All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSSCORPORATION.

4