frank cv

TSOKOH FRANK GBESIMI

ROV pilot/ /Deep offshore engineer/Electrical/Electronics Engineer/ Instrumentation and process control Engineer/

Address:Flat 8/4 G21 2QB 140 Charles street , Royston, Glasgow, Scotland , United Kingdom. Phone: +447467438174, +2348064288259 E-Mail: [email protected], [email protected], [email protected]

Linkedln ID : ng.linkedin.com/pub/tsokoh-gbesimi/42/96a/b10/

SEX :MaleMARITAL STATUS :MarriedSTATE OF ORIGIN :DeltaLOCAL GOVERNMENT AREA : Warri SouthNATIONALITY : NigerianRELIGION :Christianity

CAREER OBJECTIVES

1. To strive for excellence at all times, contributing the best of my ability as to improve organizational objectives and achieve managerial goals and target

1. To apply my skills in a challenging and dynamic environment that offers

opportunities for career development and commensurate rewards for

D E MO V E R S I O N

proven productive capabilities

EDUCATIONAL QUALIFICATIONS

1. M.sc Applied Instrumentation AND Control Engineering( Oil & Gas Option) (2014-2015)Glasgow Caledonian University, Glasgow Scotland , United kingdom Grade : MERIT/Distinction

1. B.Eng (2nd Class Hons) Electrical/Electronics Engineering (2003 - 2009)UNIVERSITY OF PORT HARCOURT, RIVERS STATE, NIGERIA

1. Senior Secondary School Certificates (1993 - 1999)

1. CLASSICAL INT’L HIGH SCHOOL, WARRI, DELTA STATE, NIGERIA

1. West Africa School Certificate (WAEC)

1. ALDER’S TOWN PRI.SCHOOL , WARRI , DELTA STATE , NIGERIA (1987 - 1993)

TECHNICAL/PRACTICAL QUALIFICATION

1. [2015] Subsea engineer/ ROV pilot/Technician at

Underwater centre Forte Williams, United kingdom

2. Launching and 'flying' the ROV by remote control from the surface of the water

to certain depths.

*Operating auxiliaries such as cameras and interpreting data, from video or sonar

displays to calculate and keep track of the position of the vehicle.


*Navigating the ROV’s route, avoiding hazards such as moving parts of the ship.

*Operating the robotic arms (Grabbers, Manipulators, etc) to perform simple

tasks such as picking up items from the seabed.

* Regular maintenance of the ROV and its associated equipment and carrying out

repairs on location.

*Carrying out technical tasks: for example, rigging and operating basic electronic

and hydraulic construction.

3. [2015] Basic Offshore Safety Induction & Emergence Training

with Norwegian Upgrade (EURO) OPITO- Petrofac Oilfield

service , Aberdeen , UK

1. [2015]Minimum Industry Safety Training (MIST) and HUET

OPITO - Petrofac Oilfield service , Aberdeen , UK

2. [2013] Technocrat Automation Institute (IAO Accredited)Chennai,

India

1. [2014] HSE conference at Elk Grove Sacramento ,California

,USA

[2013] Technocrat Automation Institute (IAO

Accredited)Chennai, India

Obtained Post Graduate Diploma in Industrial Automation


(PGDIA), with hands on practical experience in Industrial

Automation Tools specializing in PLC, HMI/MMI ,DCS,

SCADA and VFD.

1. [2013] Technocrat Automation Institute (IAO

Accredited)Chennai, India

Obtained Advanced Diploma in Process control systems

(ADPA), major in PID-Controllers, Distillation Column and

Super-Heated Steam Generation Processes, Evaporator ,Plug

Flow Reactor , Centrifugal Compressor and Pump, Heat

Exchanges (Shell & Tube), FURNACE, CSTR, Flash DRUM,

Gas Turbine and Industrial Co-Generation Boiler.

AREAS OF EXPERTISE

1. PLC (Programmable Logic Controllers) &DCS

(Distributed Control System) - Programming languages

such as LD(Ladder Diagram) &FBD (Functional Block


Diagram) Honeywell DCS - Honey SCADA interfacing

with the DCS , ABB DCS interfacing with MMI2. Hands on Practical exposure in brands such as

Siemens, AB (Allen Bradley), ABB (Asea Brown Boveri)

,Schneider, GE-Fanuc, Keyence, Omron, Messung,

Mitsubishi, and Delta3. SCADA (Supervisory Control &Data Acquisition)

Wonderware Intouch , Intellution FIX , WinCC Flex –

Screen designing, PLC interfacing to SCADA, Data

collection & storage.4. HMI (Human Machine Interface) - Screen designing,

PLC interface, DCS interface5. PAC (Programmable Automation Controller) Honeywell

PAC ML-50 controller series – Position control systems ,

X, Y axis Robotic Control using Servo motors & drives.

Interfacing PAC controller module to Honeywell

HMI/MMI6. VFD (Variable Frequency Drive) ABB brand –

Interfacing the VFD to PLC unit ,Commissioning and

Troubleshooting 7. VSD (Variable Speed Drive) Siemens Micromaster

440/420/410 series – Commissioning and Troubleshooting 8. Implementing PID control algorithms from a PLC


programe, interpreting PFD diagrams, P& ID

mechanization , transmitters, valves, Variable speed drive

(VSD), variable frequency drive for 3-phase motor control

, interfacing a 3-phase motor to Siemens Micro-master

440 drive 9. Pneumatics&FieldInstruments ( Control Valve, Sensors,

Level Transmitters, Flow Transmitters, Temperature

Transmitters, Pressure Switches)10.Interfacing between PLC & GSM modem to communicate

with mobile device , where process alarm messages can be

sent in the form of SMS to operator’s mobile number11.Knowledge in Panel wiring 12.Knowledge in PID(Proportional Integral Derivative) 13.Troubleshooting – PLC & DCS programming ,14.Control Panel (Power wiring & Control wiring)

15.Vast knowledge on use of sensors and design of detector

systems (Gas leakage detectors, smoke & Fire detectors,

Intruder detector) with SMS alert, automated phone call

alert and alarm.

16.Vast knowledge on Embedded system design- (8051

Micro- Controller architecture , AVR Micro - Controller


architecture and embedded system programming using

Assembly language , C- language , Java 2 Micro-

Edition(J2ME).

17.Design and construction of GSM/WEB based remote car

mobiliser and demobiliser systems, object location

tracking systems using GPS MODEM, Java programming

and micro-controller technology(Embedded C language).

Embedded system development, electronics

design/development and embedded programming

using micro-Java, embedded C and Assembly

language , use of Proteus/AERIS , Electronic

workbench , Multism-7 , EAGLE Simulator software

for electronic circuit designs , troubleshooting ,

simulation and circuit drawing.1.

Relevant experience1. SOFTWARE ENGINEER, August 2011- June 2012 NYSC primary assignment, (Computer Warehouse Group , Expert-Edge subsidiary), Lagos, NigeriaRoles & Responsibilities:

Software development for companies.


1. AUTOMATION ENGINEER (TRAINNER ENGINNER) 2008- 2010 BOURDIGITAL GLOBAL LINK, Rivers state, Nigeria

POSITION: TRAINNER

Roles& Responsibilities:

Practical training on robotics/ Mechantronics design, robot

programming, designs, circuit simulation and automation 1. CONTROL ENGINEER (TRAINNER) 2009- 2011 I-DIGIT TECHNOLOGY, Anambra state, Nigeria

POSITION : TRAINNER

1. MOBILE DEVELOPER (ASISTANT INSTRUCTOR) 2010- 2011 OYOL COMPUTERS (a.k.a JAVA HOUSE), Rivers s tate, Nigeria

POSITION: Software development and deployment of wireless telephony application using Micro-edition of Java.

TRAINING ATTENDED

ROV/DEEP OFFSHORE engr Underwater centre,Aberdeen, UK

Post Graduate Diploma in Technocrat Automation solutions

Industrial Automation(PGDIA)- Pvt Ltd Chennai , India

Control systems

Advanced Diploma in Process Technocrat Automation solutions

Automation(ADPA) Pvt Ltd Chennai , India

Instrumentation and process Applied Engineering Technology


control(Automation) engineering Initiative (AETI) Ltd ,Surulere ,

Lagos

Software development - Java UPCC Computers , PORT

programming language, C#.net , HARCOURT (2004)

Visual basic 6.0 programming,

Visual basic.NET programming

,Database programming-MS-

ACCESS,MYSQL, Stored

Procedure ,Network programming,

Video streaming programming

Diploma in industrial Electronics Digitronix Technology house(

and Electrical system design , PORT HARCOURT) (2003)

embedded system design

programming using embedded C-

language ,Micro-Java and

Assembly language programming

LIST OF SOME OF THE PROJECTS/RESEARCH I HAVE

EXECUTED DURING MY UNDERGRADUATE SCHOOL DAYS

PROJECT EXECUTED TECHNOLOGY USE

I designed and constructed a GSM JAVA technology, Sequential logic technology,


phone based controlled SMART Allen Bradley PLC, Wonderware Intouch

PLANT.A PLANT where you can SCADA system , embedded C LANGUAGE

remotely shut down all emergency for the hardware design.

shutdown valves using a GSM

PHONE and also using a laptop via

the internet

I designed and constructed a PRE- I use Java 2 Micro-Edition and Embeded C

PAID BILLING/SMART METER language for the and also a Micro controller

for electricity consumption. This meter unit hardware design, JSF (Java Server Faces)

can be recharged and monitored using for the web server framework, XHTML, XML

a GSM phone and also from the and MYSQL database.

Internet

I designed and constructedGAS Java Server Faces for the Google map

LEAKAGE DETECTORS. A application, Micro Java for the mobile

system that detects the presence of interface, C-language and Assembly language

(Nitrogen, carbon II oxide , Hydrogen, combined for the gas Detector hardware

methane gas, ethane, alcohol ) gas and design.


send the location of location to

control room in form of SMS and

Email alert.

I designed and constructedcomputer I use Java programming for the computer

automated ROV system for interface and embedded C language for the

underwater operations micro-controller firmware development

I designed a GSM phone enabled J2ME for the GSM phone application and

security doors. A system that allows embedded C-language

me to lock and open my door either For hardware firmware development

within the environment or remotely

using a GSM phone

Final Year MSc project (2015): I designed and constructed a smart

pre-paid billing meter with remote server and mobile GUI

interface.The power server interface and the VOICE server software

was developed with LabView and Java.

Final Year Bsc project (2009): I designed a Robotic system which was

controlled through the Internet and also I controlled it using a GSM


phone. I used USB port for the communication interface; I used

embedded C and Java programming language to develop the Internet

application ; I used J2ME(Java 2 Micro-Edition) for the GSM phone

interface application.

Hobbies: Music, Movies and Meeting People

Referees1. Agomuo Maxwell Uchenna

ROV Engineer at Tilone subsea ,Rivers state , NigeriaPhone : +2348035435216 , +2348094388607 , +447553098725

1. Engr. Marcus SunnyLufkin Automation, Odessa Texas. USA.

Phone: 281-736-17651. Mr. Paul Mathew

Snr. Manager –(International) Training & Placement , Technocrat Automation solutions Pvt Ltd , Chennai city , India

Tel : +91-9500157848 , [email protected]

1. Engr. Igweze Chinworba

Director of I-Digit Technology Awka , Anambra State.

Tel: (+234) 08034641900

1. Engr/Mrs. Orakwe HelenSenior Lect. Department of Elect/Elect Engineering,University of Port Harcourt,P.M.B 5323 PHC.Tel:(+234) 08035812519.


1. Dr. Ekebong Bathlomi

Senior Lect. Department of Computer science,University of Port Harcourt,P.M.B 5323 PHC.Tel:(+234) 08037049586.
