8/13/2019 FP_lease6014 00-6059 00

1/6

Intelsat Transmission Plan For

Customer and Ca

8/13/2019 FP_lease6014 00-6059 00

2/6

8/13/2019 FP_lease6014 00-6059 00

3/6

Lease Name: NWZ/NWZ/ 6014.00/3789.00 - 6059.00/3834.00Service Order Number:

Carrier ID

Service

Type Status Ulk Center Frq (MHz)

Info

Rate

(kbps)

Overhead

(kbps)

Num of

Phases

(2, 4, 8, 16...)

FEC

Rate

Reed-

Solomon

Coding Coding

Filter Roll-

Off Factor (0

X 1)

Alloca

Bandw

(MH

6014.0000 6014.5376 1024 0 4 2/3 LDPC 1.0

6015.6128 1024 0 4 2/3 LDPC 1.0

6017.2256 2048 0 4 2/3 LDPC 2.1

6018.8384 1024 0 4 2/3 LDPC 1.0

6019.9136 1024 0 4 2/3 LDPC 1.0

6020.9888 1024 0 4 2/3 LDPC 1.0

6022.0640 1024 0 4 2/3 LDPC 1.0

6024.7520 4096 0 4 2/3 LDPC 4.36029.0528 4096 0 4 2/3 LDPC 4.3

6033.3536 4096 0 4 2/3 LDPC 4.3

6036.5792 2048 0 4 2/3 LDPC 2.1

6038.1920 1024 0 4 2/3 LDPC 1.0

6039.2672 1024 0 4 2/3 LDPC 1.0

6040.3424 1024 0 4 2/3 LDPC 1.0

6041.4176 1024 0 4 2/3 LDPC 1.0

6042.4928 1024 0 4 2/3 LDPC 1.06043.5680 1024 0 4 2/3 LDPC 1.0

6044.6432 1024 0 4 2/3 LDPC 1.0

6045.7184 1024 0 4 2/3 LDPC 1.0

6046.7936 1024 0 4 2/3 LDPC 1.0

Start Edge of Lease:

INPUT

Flight: Intelsat 702/66 Transponder: 42/42

8/13/2019 FP_lease6014 00-6059 00

4/6

Deg Min Sec Deg Min SecCountry

Longitude Tx Peak Gai

(dB)

Minimum required data columns for defining non-registerd ESAs are highlighted in RED. Other data columns are optional.

Diameter

(meters)

G/T

(dB/K)

Tx Polarization

Isolation (dB)

Rx Polarization

Isolation (dB)ESA ID Nearest City

Latitude

8/13/2019 FP_lease6014 00-6059 00

5/6

Company: Company Name

Contact Person: Contact Name

E-mail Address: name@domain

Telephone Number: ###-###-####

Facsimile (Fax) Number: ###-###-####

mailto:name@domainmailto:name@domain

8/13/2019 FP_lease6014 00-6059 00

6/6

- Lease and Service Order Number specifications are optional

- Customers must only change/specify attributes in the INPUTcolumns of the worksheet

- The Flightand Transponderspecifications should not be modified, if filled in by OLM

- The Service Type is a free-form description of the service (e.g., DVB, GXS, IDR, IBS, VSAT, DIG)

- Reed-SolomonCodingshould be in the format of "K/N" (e.g, 201/219, 235/255)

- If specified, Codingshould reflect a value such as TPC, Viterbi, Sequential, TCM, LDPC, etc.

- Filter Roll-Off Factor, if specified, is used to compute Allocated Bandwidth as: Occupied BW * (1+rolloff factor)

- To specifiy desired downlink EIRP at beam-edge for a carrier, specify the value in the INPUT Downlink EIRP @ BEcolumn

- The TX ESAand RX ESAsmust reference either ESAs already registered with Intelsat or ESAs listed in the ESAsworksheet

- For multiple ESAs under RX ESAs, the list of ESAs should be comma delimited.

- The CALCULATEDfields are filled in via OLM only for existing carriers in the Intelsat system

- C/N performance specifications take precedence over Eb/No performance specifications

- The Lease Start Edgeand Lease End Edgeare the starting and ending frequencies of the lease in MHz - these must be specified.

- When adding more lines to the Carriers worksheet, lines should be inserted between the Lease Start Edgeand Lease End

Edgerows.

- ESA ID should not exceed 8 alphanumeric characters

- Portabilityshould reflect a value such as Fixed, Transportable, Maritime, etc.

- Columns can be rearranged in any order and hidden, if need be.- Column header information can be modified, if need be.

- Columns should never be deleted.

Carriers Worksheet Notes

ESAs Worksheet Notes

General Notes on Carriers and ESAs Worksheets