formulation guide - ajiaminoscience.eu · many natural ingredients are used for the formulation....
TRANSCRIPT
2018FORMULATION
GUIDE
・・・・・・・・・・・・・・・・
・・・・・・・・・・・・・・・・・・・・・・
・・・・・・・・・・
The infinity “A” The “A” incorporates the infinity symbol and represents the “A” of taste (“Aji”) and Amino acids. It signifies our infinite ambitions to pursue, master and popularize this taste (“Aji”), to drive the evolution of and develop the value of Amino acids using leading-edge bioscience and fine chemical technologies, and to promote global sustainability.
The line from the bottom of “j” extending upward to the right This line expresses the future growth and development of the AJINOMOTO® Group.technologies, and to promote global sustainability.
The line from “A” to “j” The “j” represents a person, suggesting people joining together and finding joy in cooking, eating and comfortable life styles enriched by taste (“Aji”) and Amino acids.
CONTENTS
4AMINO ACID CONCEPT: PRODEW®
12COACERVATION
18INSTANT FOAMING CLEANSER
22NEW TRENDS
27FORMULATION FINDER
AMINO ACID CONCEPT: PRODEW®
AMINO ACID CONCEPT FOR
HAIR CARE
AJINOMOTO® Group being the specialist in amino acids technology, our Amino Acid cocktails “Prodew®” use this knowhow to enhance your hair care and skincare formulations.
Prodew® 500Prodew® 500 is an Amino acid blend modeled after the protein composition of the Cell Membrane Complex (CMC)
*Cys and Met are excluded. J. A. Swift et. al., Journal of Society of Cosmetic Chemist. 25. 355. (1974)
Asp
Ser
Gly
Val
His
Glu
Pro
Ala
IIe
Lys
Thr
Tyr
Leu
Phe
Arg
Constituent amino acids of protein in CMC* Amino Acids Mix of PRODEW® 500
MAIN PROPERTIES: Efficient moisturizer & Conditioner Synergetic uptake of PCA and Amino Acids by hair and scalp Provides Color retention of dyed hair Increases hair luster
Controls Hair damage❖ Increases Hair hydrophobicity❖ Increases Hair tensile strength
Preservative free
Hair Tresses treated with Prodew® 5000% 2% 5%
6
ACAC-SH-150724-1
PEARL SILICONE-FREE HAIR SHAMPOO
Amisoft® ECS-22W maintains hair moisture and prevents damage of hair cuticle. Eldew® PS-203R and Prodew® 500 improve hair hydrophobicity and shine
and prevent dry scalp.
Part Ingredient (wt % ) Function Trade name / Supplier
A Amisoft® ECS -22W (30%) 25,00 Primary surfactant AJINOMOTO CO. INC.
COCAMIDOPROPYL BETAINE (30%) 10,00 Foam booster DEHYTON K / BASF
SODIUM LAUROAMPHOACETATE( 32%) 15,00Secondary surfactant
MIRANOL L-32 / SOLVAY
DECYL GLUCOSIDE (50%) 4,00 Foam booster PLANTACARE 2000UP / BASF
Eldew® PS-203R 0,20 Emollient AJINOMOTO CO. INC.
WATER balance
B ACRYLATES CROSSPOLYMER-4 6,50 ThickenerCARBOPOL AQUA SF-2 /
LUBRIZOL
WATER 15,00
C Prodew® 500 (50%) 2,00 Moisturizer AJINOMOTO CO. INC.
D GLYCOL DISTEARATE 1,50 Pearlizing agent
E PRESERVATIVE q.s.
F CITRIC ACID (30%) aq. to pH 5.8 3,57 pH-adjusterThe level of Citric acid is
presented as a rough guide
1. Mix part A with gentle stirring at room temperature.2. Add part B to mixture at room temperature.3. Add part C at room temperature. 4. Heat mixture of part ABC to 70-80°C.5. Add part D at 70-80°C.6. Cool down to room temperature.7. Add part E and F at room temperature and keep stirring until uniform.
PROCEDURE:
pH: 5.80Viscosity: 3,800-5,500 mPa.s (64, 30rpm, 30 sec., 25°C).Stability: 1, 25, 45, 50oC, Cycle(-5<=> 40°C) for 3 months.
TECHNICAL INFORMATION:
7
ASC 27-116-1
AMINO CONDITIONER
This conditioner features amino-derived materials that provide smoothing and detangling, enhance the appearance and feel, and improve the overall
condition of the hair.
Part Ingredient (wt % ) Function Trade name / Supplier
A Water 87.40 DiluentDeionized Water / Kewpie Co,
dist. by AJINOMOTO® NA
Amisafe® AL-01 0.10 Amino acid conditioning agent / Smoothing, control AJINOMOTO CO. INC.
Prodew® 500 1.00Amino acid coctail /
Smoothing, color protection, shine, luster
AJINOMOTO CO. INC.
B Stearalkonium Chloride 1.50 Cationic Conditioner Ammonyx 4B / Stepan
Cetrimonium Chloride 1.00 Cationic ConditionerAmmonyx CETAC /
Stepan
CAE 0.50 Amino Acid based Cationic Conditioner AJINOMOTO CO. INC.
Eldew®PS-203R 0.50 Amino Acid Based Emollient/ Damage care AJINOMOTO CO. INC.
Emulsifying Wax NF 0.70 Emulsifier Polawax / Croda
C Phenoxyethanol, Ethylhexyl Glycerin 1.00 Preservative Euxyl PE-9010 / Schülke & Mayr
Charge batch vessel with water and begin heating to 75°C with stirring. Add Amisafe® AL-01 and Prodew® 500. Combine Phase B and add to Phase A at 75ºC. Allow to mix 20 minutes at 75°C then begin cooling while maintaining controlled mixing. When batch reaches 50 ºC, add preservative. Continue cooling and mixing to room temperature.
PROCEDURE:
pH: 4.2 - 4.7Viscosity: 11,000 mPa.s at 3 rpm, spindle #3, 25ºC, 30 sec (Brookfield).Stability: >3 weeks at 25, 40, 45°C.
TECHNICAL INFORMATION:
8
9
Prodew® 600Prodew® 600 is an Amino acid blend modeled after the Natural Moisturizing Factor (NMF) in the Stratum Corneum.
Amino Acid compositionof NMF
H.W.Spier, G.Pascher, Der Hautarzt, Vol.7, 55-60 (1956)
NeutralAmino Acids,
44.7%
BasicAmino Acids, 13.7%
CyclicAmino Acids, 0.9%
HydroxylAmino Acids,
31.3%
AcidicAmino Acids, 9.4%
Amino Acid compositionof Prodew® 600
NeutralAmino Acids,
44.8%
BasicAmino Acids, 13.7%
CyclicAmino Acids, 0.9%
HydroxylAmino Acids,
31.3%
AcidicAmino Acids, 9.3%
COMPOSITION NMF (%)
Amino Acids 42.2
PCA 12.2
Lactic Acid 11.3
Urea 6.7
Others 27.6
MAIN PROPERTIES: The Amino Acid composition of Prodew® 600 is almost the same as the NMF
Prodew® 600 in a skin toner and skin cream strongly reduces fine wrinkles
Penetrates into the Stratum Corneum and improves the water content in the skin
Improves the skin barrier function Preservative free
Before application After application
AMINO ACID CONCEPT FOR
HAIR CARE
NST-2
SKIN TONER
A skin toner for dry skin, formulated with Prodew® 600(Technical Data Sheet No.1002-0380E ~ 0470E)
Part Ingredient (wt % ) Function Trade name / Supplier
A Sodium Hyaluronate 0,03 MosturizerFCH-120 / KIKKOMAN
BIOCHEMIFA
B Water 76,80
C Prodew® 600 5,00 Mosturizer AJINOMOTO CO. INC.
Butylene Glycol 4,00 Mosturizer
PEG-8 8,00 Mosturizer
Alcohol 3,00
Preservative q.s.
D 5% NaOH 1,10
1. Add part A to part B while stirring2. After confirmation of dissolution, add part C to part A while stirring.3. Add part D to part A to adjust the pH.
PROCEDURE:
pH: 5.5Stability: 50°C, 45°C, 25°C, 0°C, -5°C, Cycle(-5°C~40°C) for one month.
TECHNICAL INFORMATION:
10
11
CRP-3
MOISTURIZING CREAM
Prodew® 600 imparts a long lasting moisturizing effect(Technical Data Sheet No.1002-0380E, 0390E, 0400E, 0410E, 0440E, 0450E, 0460E, 0470E)
Part Ingredient (wt % ) Function Trade name / Supplier
A Squalane 3,00 Emolient
Microcrystalline Wax 2,00 EmolientRefined Microcrystalline Wax /
NIKKO RIKA
Isopropyl Myristate 5,00 EmolientIPM / KOKYU ALCOHOL
KOGYO
Dimethicone 0,50 Emolient KF-96A-10CS / SHIN-ETSU
Cetyl Alcohol 3,00 Emolient KALCOL 6098 / KAO
Behenyl Alcohol 1,00 Emolient KALCOL 6098 / KAO
Glyceryl Stearate 3,50 EmulsifierNIKKOL TS-10V / NIKKO
CHEMICALS
Polysorbate 60 2,00 EmulsifierNIKKOL TS-10V / NIKKO
CHEMICALS
B Amisoft® HS-11P 0,30 Co-emulsifier AJINOMOTO CO. INC.
Glycerin 8,00 Moisturizer
Butylene Glycol 4,00 Moisturizer
Prodew® 600 2,00 Moisturizer AJINOMOTO CO. INC.
5% NaOH 0,80
Preservative q.s.
Water balance
1. Dissolve part A at 80oC.2. Dissolve part B at 80oC.3. Add part B to part A while stirring and emulsify with homomixer at 3000rpm, 5min.4. Cool down to room temperature while stirring.
PROCEDURE:
pH: 5.5Viscosity: 25,000-45,000 mPa.s (B type, rotor No.4, 12rpm, 30sec., 25°C).Stability: 45°C, 25°C, 0°C, -5°C, Cycle(-5°C~40°C), for one month.
TECHNICAL INFORMATION:
COACERVATION
COACERVATION How to get conditioning effect and damage care prevention on Hair.
Our solution :Formulate an Amino-Shampoo combining Amisoft® CS-22 and cationic polymer.
Composition of a basic Hair Shampoo:
14
AMINO-SHAMPOO CONTAINS AMINO ACID SURFACTANTS Key words Non-silicone Sulfate-free Natural concept Gentle
- Silicone causes "built-up effect" on our hair.- Shampoo without Silicone has a problem of "squeaky feeling"
when it is rinsed. ➞ The solution is Amino Acid surfactant / "COACERVATION"
Scalp care Absorption Moisture
Action (wt % ) Example
Water 60~80
Foaming cleansing surfactant
15~20 Anionic surfactantAmphoteric surfactant
Foam booster 2~5 Fatty acid alkanolamidesBetaine
Thickening polymer 0.5~2 Xantham gum, cellulose
Conditioning agents
0.1~1Quaternaty ammonium compounds, Quaternized polymer
Preservative -
Others -Citric acid, NaOHEDTA
pH 4.8~6.8
Lipophilic part
Anionic surfactantHydrophobic part Counter Ion
- +
Amphoteric surfactant
-+
Ex.: Cocamidopropyl betaine
Ex.: Polyquaternium
Ex.: SLES, Amisoft®, Amilite
+++ +
+Cationic polymer
+++ +
+Cationic polymer
Lipophilic part
Anionic surfactantHydrophobic part Counter Ion
- +
INTERACTION
COACERVATION
+ ++
++
Start of rinsing
End of rinsing
15
+ ++
++
1. Solubilization
2. Saturation
Dilution
Dilution
Dilution
3. Hydrophobicity
4. electrostatic / molecular attraction
➞➞
➞➞
➞➞
Sphericalmicelle
Cationicpolymer
CationicpolymerHemi micelle
++
+
++ +
+
++
++
+
++ +
+
++
++
+ ++
Monomer
1. Soluble
2. Soluble
4. Soluble
3. Insoluble = Coacervation
Making complex of hemimicelles of
surfactants and cationic polymers = Coacervate
AMISOFT® CAN ENABLE EASIER COACERVATION THAN OTHER ANIONIC SURFACTANTS.
16
COACERVATE ON HAIR DURING WASHING PROCESS
MEASUREMENT OF KINETIC FRICTION DEMONSTRATES BENEFITS OF USING AMISOFT® IN A SHAMPOO FORMULATION:
SLES SHAMPOOAMINO SHAMPOO
SLES SHAMPOOAMINO SHAMPOO
SEM picture of hair
Natural hair tresses about 15cm long (1g weight) tested on a Friction tester (KES-SE Katotech)
Amisoft® Shows good smoothness during rinsing
Force-VoltageTransducer
The coacervate of Amisoft® can stay on hair better than SLES's, and can prevent hair damage.
17
CSAN-220CP
TRANSPARENT HAIR SHAMPOO
Many natural ingredients are used for the formulation. Amisoft® CS-22 and MS-11 provide rich foam and smooth hair feel.
Part Ingredient (wt % ) Function Trade name / Supplier
A Amisoft® CS-22 (25%) 10,0 Foaming cleansing surfactant AJINOMOTO CO. INC.
Amisoft® MS-11 1,0 Foaming cleansing surfactant AJINOMOTO CO. INC.
DECYL GLUCOSIDE 8,0Foaming cleansing
surfactant
DISODIUM COCO-GLUCOSIDE CITRATE(30%) 5,0 Solubilizer Plantacare 2000up / BASF
GLYCERIN 5,0 Humectant
Ajidew® NL-50 (50%) 2,0 Conditioning agent AJINOMOTO CO. INC.
Amisafe® AL-01 0,2 Conditioning agent AJINOMOTO CO. INC.
WATER Balance Balance
PRESERVATIVE q.s. q.s.
B2% GUAR HYDROXYPROPYLTRIMONIUM
CHLORIDE26,6 Conditioning agent
JAGUAR EXCEL / Solvay Novecare
B 2% XANTHAN GUM 15,0 Thickening polymer Keltrol CG-SFT / CP Kelco
C CITRIC ACID 10% aq. 2,8 pH adjustmentThe level of citric acid is
presented as a rough guide
1. Heat part A to 80o C while stirring and dissolve.2. Add part B to A while stirring slowly and mix well at 80o C3. Add part C to A+B while stirring slowly and mix well at 80o C4. Add part D and mix well.
PROCEDURE:
pH: 5.90Viscosity: 4,000 mPa.s (B type, rotor No.3, 12rpm, 30sec., 25°C).Stability: -5°C, 25°C, 45°C, Cycle(-5, 40°C) for 3 months.
TECHNICAL INFORMATION:
INSTANT FOAMING CLEANSER
INSTANT FOAMING CLEANSER
SP-01-CS
FACIAL CLEANSER PUMP
In addition to efficiency and mildness, end users’ expectations for facial cleansers now include ease of use and rich foam. The below formulation combined with a suitable dispenser meets these expectations.
Amisoft® based self-foaming type facial cleanser. Ajidew® NL-50 leaves smooth skin-feel after washing.
Part Ingredient (wt % ) Function Trade name / Supplier
A Amisoft® CS-22 (25%) 33,0 Foaming surfactant AJINOMOTO CO. INC.
DECYL GLUCOSIDE 4,0 Foaming surfactant PLANTACARE 2000UP / BASF
BUTYLENE GLYCOL 5,0 Moisturizer
PEG-40 HYDROGENATED
CASTOR OIL PCA ISOSTEARATE 2,0 StabilizerPYROTER CPI-40 / Nihon emulsion
B Ajidew® NL-50 (50%) 1,0 Moisturizer AJINOMOTO CO. INC.
PRESERVATIVE q.s.
WATER balance balance
1. Dissolve all ingredients at 70-80oC while stirring.2. Cool down to 30oC.
PROCEDURE:
pH: 6.80Viscosity: 3 mPa.s (B type, rotor No.1, 30rpm, 30sec., 25°C).Stability: -5°C, 25°C, 45°C, Cycle (-5°C~40°C) for one month.
TECHNICAL INFORMATION:
20
ACAC-DMS-18
FOAMING MAKE-UP REMOVER
Easy-to-use self foaming-type make-up remover. Amilite® GCK-12H is employed for its foamability and fresh skin afterfeel.
1. Mix part A until uniform at room temperature.2. Mix part B until uniform at room temperature.3. Add part B to part A slowly and continuously.4. Keep stirring until clear.5. Heat the mixture and add part C about 60-70°C.6. Keep stirring ang heating until uniform.7. Cool down to room temperature.
PROCEDURE:
pH: 7.54Stability: 1, 25, 45°C, Cycle(-5, 40°C) for 3 months.
TECHNICAL INFORMATION:
21
Part Ingredient (wt % ) Function Trade name / Supplier
A HYDROGENATED POLYISOBUTENE 1.1 Make up cleansing PERLEAM EX / NOF
PEG-20 GLYCERYL TRIISOSTEARATE 2.7 Emulsifying agentEMALEX GWIS320 / NIHON
EMULSION
B WATER balance
DIPROPYLENE GLYCOL 10.0 Solubilizer
GLYCERIN 10.0 Humectant
Amilite® GCK-12H (30%) 10.0 Cleansing agent AJINOMOTO CO. INC.
LAURAMIDOPROPLY HYDROXYSULTAINE(30%) 10.0 Cleansing agentSOFTAZOLINE LSB / KAWAKEN
FINE CHEMICAL
LAURYL GLUCOSIDE (50%) 2.0 Foam booster PLANTACARE 1200 UP / BASF
C DISODIUM EDTA 0.1 Chelating agent
Preservatives qs Preservative
NEW TRENDS
NEW TRENDS
FMABP-8-32G
FACIAL MASK SHEET
We have prepared three guide formulations following recent trends from the market: new habits in our day to day cleansing/ caring ritual (Face Mask), innovative product format (fragrance stick) and eco-friendly cleanser (Powder facial wash).
A moisturizing facial mask sheet using Ajidew® NL-50. The Emollient and Humectant ingredients are derived from amino acids, they provide super
moisture feeling without greasiness
Part Ingredient (wt % ) Function Trade name / Supplier
A WATER Balance
CARBOMER 0.50 Thickener Carbopol 980 Polymer / Lubrizol
B BUTYLENE GLYCOL 0.50 Humectant
PROPANEDIOL 0.50 Humectant
XANTHAN GUM 0.05 Thickener Keltrol CG-SFT / CP Kelco
C Eldew® PS-203R 0.50 Emollient-Quasi- intercellular lipid AJINOMOTO CO. INC.
PEG-40 HYDROGENATED CASTOR OIL 3.00 Solubilizer EMALEX HC-40 / NIHON Emulsion
BUTYLENE GLYCOL 2.00 Humectant
D WATER 36.00
E Ajidew® NL-50 2.00 Skin natural moisturizer AJINOMOTO CO. INC.
SODIUM HYALURONATE (1% Soln.) 0.50 Sensory improver Hyaluronic acid FCH-201P / Kikkoman biochemifa
F WATER 10.00
L-Arginine C-Grade 0.76 pH adjuster AJINOMOTO CO. INC.
DISODIUM EDTA 0.05 Stabilizer Dissolvine S-NA2-S / Akzo Nobel
G PRESERVATIVE q.s.
FRAGRANCE q.s.
1. Make a homogeneous dispersion of part A using disperse mixer.2. Mix the part B at room temperature.3. Add part B to part A while stirring at 85°C until be a homogeneous liquid.4. Mix the part C at 85°C.5. Add part C to part D slowly with stirring at 85°C to make solubilized liquid.6. Add part C to part A with gentle stirring at 85°C until white liquid obtained.7. Cool down to 45°C while stirring then add part E.8. Add the part F to main part while stirring to neutralize.9. Add part G to main part while stirring.10. Cool down to room temperature.
PROCEDURE:
Appearance: Translucent low viscous liquid pH: 6.0 (Direct measurment)Viscosity: 600-1,200 mPa.s (B-type, rotor No.3, 30 r.p.m., 30 sec., 25°C)Stability: -5, 5, 25, 40, 45, 50°C, Cycle(5-45°C)/1month
TECHNICAL INFORMATION:
24
ASC 30-66
AMINO BLOSSOM FRAGRANCE
This transparent solid fragrance not only has an enticing cherry blossom scent but also a unique appearance. A hard clear gel is produced by using a pair of low molecular weight amino acid-derived gelling agents that combine to form a stable network in the chosen oils. The resulting clear solid gel traps the
fragrance and releases it upon contact with the skin. Eldew® SL-205 is a light amino emollient ester that contributes to glide on the skin while
Eldew® PS-203 acts as a stability enhancing agent and effective ceramide-like emollient.
Part Ingredient (wt % ) Function Trade name / Supplier
A GELATINIZATION AGENT GP-1 3.00 Pre-gel Mixture. Stick Strength and structure AJINOMOTO CO. INC.
GELATINIZATION AGENT EB-21 2.00 AJINOMOTO CO. INC.
Octyldodecanol 20.00 Risonol 20SP / Kokyu Alcohol
B Hydrogenated Polyisobutene 5.00 High Viscosity Oil Panalane H300E / Lipo Chemicals
Hydrogenated Polyisobutene 9.00 Low Viscosity Oil Panalane L14E / Lipo Chemicals
Eldew® SL-205 10.00 Light Ester, Moisturization AJINOMOTO CO. INC.
Diisostearyl Malate 9.00High MW ester, Stability,
MoisturizationSchercemol DISM Ester / Lipo Chemicals
C12-15 Alkyl Benzoate 11.00Light Emollient,
Clarity improvement, Moisturization
Liponate NEB / Lipo Chemicals
C Isostearyl Isosterate 10.00 Schercemol 1818 Ester / Lubrizol
Eldew® PS-203R 7.00 Stabilizing Agent, Emollient, Moisturizer AJINOMOTO CO. INC.
Fragrance 12.00 Fragrance Cherry Blossom Fragrance / Firminech
Clementine Essential Oil 2.00 Fragrance Clementine CO2 Essential Oil
Heat Phase A to 95°C, mix until dissolved, then add to the heated to 95°C Phase B, mix thoroughly while maintaining temperature. Upon cooling to 85°C, slowly add mixed Phase C. Maintain temperature at 85°C and pour into molds, then let cool to room temperature.
PROCEDURE:
Appearance: Clear gel stickSolidification point: ~75°C.
TECHNICAL INFORMATION:
25
26
PWT-310
POWDER FACIAL WASH
Ingredient (wt % ) Function Trade name / Supplier
Amisoft® LS-11 15,0 Cleansing surfactant AJINOMOTO CO. INC.
Amisoft® MS-11 15,0 Cleansing surfactant AJINOMOTO CO. INC.
MANNITOL 10,0 Humectant MARINE CRYSTAL / MARINE CRYSTAL
TALC 20,0 Dispersing agent MICROACE P-3 / NIPPON TALC
ZEA MAYS (CORN) STRACH 23,5 Vehicle ST STARCH C(W) / NIPPON STARCH CHEMICALS
GLUCOSE 15,0 Vehicle
Amihope® LL 1,0 Sensory improvement AJINOMOTO CO. INC.
AGAR 0,5 Foam stabilizer
Mix all ingredients and mill.PROCEDURE:
pH: 5.5 (1% aq.)TECHNICAL INFORMATION:
Facial wash in powder format using mild surfactants Amisoft® LS-11 and MS-11. Product has to be emulsified in the hands and then applied on the face for mild
cleansing. Amihope® LL imparts soft sensory feeling.
27
FORMULATION FINDER
Product category Product Formulation ref Application Page
Amilite® GCK-12H ACAC-DMS-18Foaming make-up
remover21
Amisoft® ECS-22W ACAC-SH-150724-1Pearl silicone free
hair Shampoo7
ANIONIC SURFACTANT
Amisoft® CS-22
CSAN-220CPTransparent hair
shampoo17
SP-01-CSFacial Cleanser
pump20
Amisoft® HS-11P CRP-3 Moisturizing cream 11
Amisoft® LS-11 PWT-310 Powder facial wash 26
Amisoft® MS-11CSAN-220CP
Transparent hair shampoo
17
PWT-310 Powder facial wash 26
AMPHOTERIC SURFACTANT Amisafe® AL-01
ASC 27-116-1 Amino conditioner 8
CSAN-220CPTransparent hair
shampoo17
CATIONIC SURFACTANT CAE ASC 27-116-1 Amino conditioner 8
Ajidew® NL-50
CSAN-220CPTransparent hair
shampoo17
SP-01-CSFacial Cleanser
pump20
FMABP-8-32G Facial Mask Sheet 24
HUMECTANT Prodew® 500ACAC-SH-150724-1
Pearl silicone free hair Shampoo
7
ASC 27-116-1 Amino conditioner 8
Prodew® 600NST-2 Skin Toner 10
CRP-3 Moisturizing cream 11
28
Product category Product Formulation ref Application Page
ACAC-SH-150724-1Pearl silicone free
hair Shampoo7
EMOLLIENT Eldew® PS-203R ASC 27-116-1 Amino conditioner 8
FMABP-8-32G Facial Mask Sheet 24
ASC 30-66Amino Blossom
Fragrance25
Eldew® SL-205 ASC 30-66Amino Blossom
Fragrance25
FUNCTIONAL POWDER Amihope® LL PWT-310 Powder facial wash 26
GELATINIZATION AGENTS GP-1 ASC 30-66Amino Blossom
Fragrance25
EB-21 ASC 30-66Amino Blossom
Fragrance25
Note: The information is provided based upon our technical data and present knowledge. However, we make no warranties, expressed or implied, and assume no liabilities in connection with any use of the information with respect to specific property, safety and suitability for a specific application. It is also not guaranteed that use of the information does not fall within the scope of any intellectual property rights.
S.A. Ajinomoto OmniChem N.V.
Axis Parc Rue Emile Francqui, 7
1435 Mont-Saint-Guibert, Belgium
TEL:+32 (0) 10 48 41-22
URL: http://www.ajiaminoscience.eu/personal-care
CONTACT
29
30
NOTES
31