ATLAS 350/550 FORMING ACCESSORIES

Post Shores

San Diego (858) 277-2100 ● Los Angeles (714) 441-9500Denver (303) 298-7777 ● Las Vegas (702) 227-6800 ● Phoenix (602) 256-0600

www.atlasform.com

Atlas 350 and 550 Post Shores offer contractors an effective high strength shoring and/or re-shoring solution for elevated floor and deck applications. With an extension height on the 350 Post Shore ranging from 6’ 9” to 11’ 6” and the 550 Post Shore ranging from 10’ 3” to 17’ 5”, Atlas Post Shores can be used for nearly all shoring applications. Featuring a galvanized finish to prevent rusting and extend the service life, Atlas 350 and 550 Post Shores also offer an efficient 3 step set up and installation saving time and labor.

Atlas 350/550 Post Shore Advantages

• Superior quality • High strength to weight ratio • Easy set up and dismantle• Safety pin locking mechanism • Easy height adjustment• Rolled threads• Self contained adjusting hardware• Weatherproof• Galvanized for durability and longevity• 350 height range of 6’9” to 11’6”• 550 height range of 10’3” to 17’5”

Dismantle is just as easy requiring a single hammer blow to the stripping pin allowing the collar to drop 1/4” and the user to safely and easily unscrew the handle and remove the shore.

San Diego (858) 277-2100 ● Los Angeles (714) 441-9500Denver (303) 298-7777 ● Las Vegas (702) 227-6800 ● Phoenix (602) 256-0600

www.atlasform.com

ATLAS 350 HeigHt extensions 6’ 9” to 11’ 6” WeigHt 50 lbs.

HeigHt (ft) 6’ 9” 7’ 7’ 6” 8’ 8’ 6” 9’ 9’ 6” 10’ 10’ 6” 11’ 11’ 6”

AlloWAble loAd (lbs) 7,600 7,600 7,600 7,600 7,600 7,600 7,600 6,800 6,200 5,500 4,800

HeigHt (ft) 10’ 3” 11’ 11’ 6” 12’ 12’ 6” 13’ 13’ 6” 14’ 14’ 6” 15’ 15’ 6”

AlloWAble loAd (lbs) 8,860 8,100 7,500 6,900 6,400 5,900 5,400 4,800 4,300 4,100 3,900

HeigHt (ft) 16’ 16’ 6” 17’ 17’ 5”

AlloWAble loAd (lbs) 3,500 3,300 3,100 2,900

Post Shores350/550

This shoring product features high load capacities for shoring heights from 10’3” to 17’5” (8,860 lbs. fully closed to 2,900 lbs. at max. extension) with a 3:1 safety factor.

instAlled in 3 eAsy steps:

1. Lift the inner tube to the approximate height required.

2. insert the pin in the nearest hoLe to the desired height.

3. turn the handLe of the threaded coLLar for the finaL adjustment to the desired height.

This shoring product features high load capacities for shoring heights from 6’9” to 11’6” (7,600 lbs. fully closed to 4,800 lbs. at max. extension) with a 3:1 safety factor.

HeigHt extensions 10’ 3” to 17’ 5” WeigHt 72 lbs.

350 load capacities

550 load capacities

ATLAS 550