fork positioners, clamp based sideshifting wide opening ... vidlic.pdf• iso 2328 fork carriers....

3-4

3

• Series KB and KS fork positioners

are based on a clamp frame, which

allows the fork lift operator to

position the forks beyond the

original width of the forklift

carriage.

• Safe handling of small, medium

and extra-large loads.

• Series KB – Non-sideshifting.

• Series KS – Separate sideshift.

• Synchronized fork movement.

• ISO 2328 fork carriers. Possibility

to use the standard forks of the lift

truck.

• All standard models designed to

handle Euro pallets from side 800

mm.

• Excellent visibility.

Fork Positioners, Clamp Based

Sideshifting wide opening fork positioners

Models KB / KS

On request:

Load backrest available on request.

Special opening ranges available on request.

For other fork carrier and fork widths, please consult Bolzoni Auramo.

Non-sideshifting

KB14YKA 1400 500 560-1680 930 613 173 72 234 153 100-130 690 220 341 9 2

KB20YKA 2000 500 560-1680 930 613 176 72 234 155 100-130 690 220 341 9 2

KB25YKA 2500 500 560-1680 930 613 180 73 234 157 100-130 690 220 341 9 2

KB28YKB 2800 500 560-1720 970 715 250 85 249 190 130-150 750 270 383 20 3

KB38YKB 3800 500 560-1950 1200 715 278 85 249 190 130-150 750 270 383 20 3

KB50YKB 4900 500 560-1810 1150 715 434 140 249 207 130-150 950 210 230 20 3

KB50YKC 5000 600 560-1810 1150 920 520 97 249 218 150-200 1005 210 230 20 4

Sideshifting

KS14YKA 1400 500 560-1680 930 613 216 96 254 189 100-130 690 220 341 9 2

KS20YKA 2000 500 560-1680 930 613 219 96 254 191 100-130 690 220 341 9 2

KS25YKA 2500 500 560-1680 930 613 225 98 254 193 100-130 690 220 341 9 2

KS28YKB 2800 500 560-1720 970 715 321 128 282 233 130-150 750 270 383 20 3

KS38YKB 3800 500 560-1950 1200 715 350 128 282 233 130-150 750 270 383 20 3

KS50YKB 4900 500 560-1810 1150 715 500 130 282 250 130-150 950 210 230 20 3

KS50YKC 5000 600 560-1810 1250 920 610 125 282 267 150-200 1005 210 230 20 4

Q BP B I D W HCG VCG LL A FL V U P ISO

kg mm mm mm mm kg mm mm mm mm mm mm mm mm 2328

Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Fork

Wid

th

Fra

me W

idth

Sid

e V

isib

ility

Heig

ht

Weig

ht

Model

Centr

al V

isib

ility

Min

imum

Carr

iage W

idth

Gro

und

Cle

ara

nce

Centr

e o

f G

ravi

ty

Vert

ical

3-5

3

Fork Positioners

Sideshifting fork positioners

Models FZ

• The FZ series fork positioner is

based on the HN sideshift frame.

• Standard lift truck forks can be

easily fitted.

• No forks welding required.

• Accurate forks mouvement.

• Excellent visibility.

• Original load backrest can be

easily fitted on the fork positioner.

• Two hydraulic functions required.• Forks are not included in the attachment price.

Standard lift truck forks can be used without any modification.• Weight and center of gravity are given without forks.

• Non-sideshifting models available on request.

• Load backrest available on request.

• Forks max. length 1500 mm.

FZ 25 X9A 2500 500 352-852 940 830 570 59 24 60 145 100+100 2

FZ 25 10A 2500 500 352-952 1040 910 570 63 24 60 145 100+100 2

FZ 25 11A 2500 500 352-1062 1150 960 570 67 24 60 145 100+100 2

Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Support

Wid

th

Fra

me W

idth

Min

imum

Carr

iage W

idth

Heig

ht

Weig

ht

Model

Sid

esh

ift S

troke

Q BP B I FL D W HCG LL A S ISO

kg mm mm mm mm mm kg mm mm mm mm 2328

3-6

3

Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Support

Wid

th

Fra

me W

idth

Min

imum

Carr

iage W

idth

Heig

ht

Weig

ht

Model

Sid

e V

isib

ility

Fork Positioners

Sideshifting fork positioners with

bar mounted fork carriers

Models FR - Compact

Notes:

• Sideshift stroke always 100 + 100 mm.

• Max. suggested fork length 1500 mm.

• Delivered without forks. Original lift truck forks can be used.

• Separate sideshift.

• Accurate fork positioning, operated

on a round chromed bar with

bushings.

• With fork carriers.

• Standard forks of the truck can be

used without modification.

• Fork carriers sliding on a chromed

bar with bushings.

• Excellent visibility, strength and

versatility.

FR 25 X9A 2500 500 340-815 940 830 814 104 41 376 60 135 322 2

FR 25 10A 2500 500 340-915 1040 910 814 110 41 376 60 135 322 2

FR 25 11A 2500 500 340-1025 1150 960 814 117 41 377 60 135 322 2

FR 25 12A 2500 500 340-1110 1245 960 814 150 42 339 66 135 272 2

FR 25 14A 2500 500 340-1265 1400 1050 814 162 42 338 66 135 272 2

FR 35 10B 3500 500 370-965 1100 890 916 140 45 423 67 135 415 3

FR 35 11B 3500 500 370-1015 1150 890 916 144 45 423 67 135 415 3

FR 35 12B 3500 500 370-1110 1245 1090 916 151 45 424 67 135 415 3

FR 35 13B 3500 500 370-1215 1350 1090 916 159 45 425 67 135 415 3

FR 49 11B 4900 500 415-980 1150 850 999 233 51 422 77 155 365 3

FR 49 12B 4900 500 415-1075 1245 900 999 244 51 421 77 155 365 3

FR 49 13B 4900 500 415-1180 1350 970 999 256 51 420 77 155 365 3

FR 49 15B 4900 500 415-1380 1550 1200 999 280 50 418 77 155 365 3

FR 49 16B 4900 500 415-1490 1660 1260 999 292 50 416 77 155 365 3

Q BP B I FL D W HCG VCG LL A U ISO

kg mm mm mm mm mm kg mm mm mm mm mm 2328

Centr

e o

f G

ravi

ty

Vert

ical

3-7

3

Fork Positioners

Non-sideshifting fork positioners with


Models FK - Compact

Notes:

• Max. suggested fork length 1500 mm.

• Delivered without forks. Original lift truck forks can be used.

• Non-sideshifting.



bushings.

• With fork carriers.




bar with bushings.


versatility

FK 25 X9A 2500 500 340-815 940 830 814 104 40 378 60 135 322 2

FK 25 10A 2500 500 340-915 1040 910 814 110 40 378 60 135 322 2

FK 25 11A 2500 500 340-1025 1150 960 814 117 40 379 60 135 322 2

FK 25 12A 2500 500 340-1110 1245 960 814 150 41 340 66 135 272 2

FK 25 14A 2500 500 340-1265 1400 1050 814 162 41 339 66 135 272 2

FK 35 10B 3500 500 370-965 1100 890 916 140 43 425 67 135 415 3

FK 35 11B 3500 500 370-1015 1150 890 916 144 43 425 67 135 415 3

FK 35 12B 3500 500 370-1110 1245 1090 916 151 43 426 67 135 415 3

FK 35 13B 3500 500 370-1215 1350 1090 916 159 43 427 67 135 415 3

FK 49 11B 4900 500 415-980 1150 850 999 230 50 423 77 155 365 3

FK 49 12B 4900 500 415-1075 1245 900 999 241 50 422 77 155 365 3

FK 49 13B 4900 500 415-1180 1350 970 999 253 50 421 77 155 365 3

FK 49 15B 4900 500 415-1380 1550 1200 999 278 49 419 77 155 365 3

FK 49 16B 4900 500 415-1490 1660 1260 999 290 49 418 77 155 365 3

Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Support

Wid

th

Fra

me W

idth

Min

imum

Carr

iage W

idth

Heig

ht

Weig

ht

Model

Sid

e V

isib

ility



Centr

e o

f G

ravi

ty

Vert

ical

3-8

3

FFP25X9A 2500 500 335 - 810 940 830 729 114 45 334 113 140 322 2

FFP2510A 2500 500 335 - 910 1040 910 729 120 45 334 113 140 322 2

FFP2511A 2500 500 335-1020 1150 960 729 127 45 335 113 140 322 2

FFP2512A 2500 500 335-1105 1245 960 729 159 47 306 119 140 272 2

FFP2514A 2500 500 335-1260 1400 1050 729 171 47 305 119 140 272 2

FFP3510B 3500 500 365-960 1100 890 854 165 54 397 135 140 415 3

FFP3511B 3500 500 365-1010 1150 890 854 169 54 398 135 140 415 3

FFP3512B 3500 500 365-1105 1245 1090 854 177 53 400 135 140 415 3

FFP3513B 3500 500 365-1210 1350 1090 854 185 53 401 135 140 415 3

FFP4911B 4900 500 440-1005 1150 850 954 283 64 406 145 160 365 3

FFP4912B 4900 500 440-1100 1245 900 954 300 64 405 145 160 365 3

FFP4913B 4900 500 440-1205 1350 970 954 310 63 404 145 160 365 3

FFP4915B 4900 500 440-1405 1550 1200 954 333 62 404 145 160 365 3

FFP4916B 4900 500 440-1515 1660 1260 954 346 61 403 145 160 365 3

Fork Positioners

Sideshifting fork positioners with


Models FFP

Notes:

• Sideshifting stroke always 100 + 100 mm

Forks are not included in the attachment price. Standard lift truck forks can

be used without any modification.

Two hydraulic functions.

Special widths are available on request.

Flow divider valve is available on request.

Pressure relief valve on request.


• Same features as corresponding

FP... models, but with ISO 2328 /

FEM / ITA fork carriers.




bar with bushings.


versatility.

• Accurate fork movement as the

fork carriers move on a round

chromed bar.

Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Support

Wid

th

Fra

me W

idth

Min

imum

Carr

iage W

idth

Heig

ht

Weig

ht

Model

Sid

e V

isib

ility



Centr

e o

f G

ravi

ty

Vert

ical

3-9

3

FFN25X9A 2500 500 335 - 810 940 830 729 114 45 335 113 140 322 2

FFN2510A 2500 500 335 - 910 1040 910 729 120 45 335 113 140 322 2

FFN2511A 2500 500 335-1020 1150 960 729 126 45 336 113 140 322 2

FFN2512A 2500 500 335-1105 1245 960 729 159 46 307 119 140 272 2

FFN2514A 2500 500 335-1260 1400 1050 729 171 46 306 119 140 272 2

FFN3510B 3500 500 365-960 1100 890 854 165 53 399 135 140 415 3

FFN3511B 3500 500 365-1010 1150 890 854 169 53 400 135 140 415 3

FFN3512B 3500 500 365-1105 1245 1090 854 176 52 401 135 140 415 3

FFN3513B 3500 500 365-1210 1350 1090 854 184 52 402 135 140 415 3

FFN4911B 4900 500 440-1005 1150 850 954 279 64 406 145 160 365 3

FFN4912B 4900 500 440-1100 1245 900 954 296 64 406 145 160 365 3

FFN4913B 4900 500 440-1205 1350 970 954 306 63 405 145 160 365 3

FFN4915B 4900 500 440-1405 1550 1200 954 330 62 404 145 160 365 3

FFN4916B 4900 500 440-1515 1660 1260 954 342 61 404 145 160 365 3

Fork Positioners



Models FFN

Notes:

Forks are not included in the attachment price. Standard lift truck forks can

be used without any modification.

One hydraulic function.




• Same features as corresponding

FP... models, but with ISO 2328 /

FEM / ITA fork carriers.




versatility .

• Accurate fork movement as the

fork carriers move on a round

chromed bar.

Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Support

Wid

th

Fra

me W

idth

Min

imum

Carr

iage W

idth

Heig

ht

Weig

ht

Model

Sid

e V

isib

ility



Centr

e o

f G

ravi

ty

Vert

ical

3-10

3

Fork Positioners

Sideshifting fork positioners

with bar mounted forks

Models FP

Notes: Weight, effective thickness and centre of gravity are given without forks.Standard sideshift stroke 100 + 100 mm.Two hydraulic functions.

Standard forks:FP25: 1200 x 120 x 40 mmFP35: 1200 x 120 x 45 mmFP49: 1200 x 150 x 50 mmOther fork lengths are available on request.Special widths are available on request.Flow divider valve is available on request.Check valve for low clamping pressures max 5,0 MPa is available on request.



• Bar mounted forks.



bushings.

• For handling of palletised loads.

• For handling of horizontal drums

and coils with the addition of a

check valve.


versatility.

• Forks included in the supply can be

fitted on lower rollers (on option).

Q BP B I FL D W HCG VCG LL U ISO


Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Tota

lF

ram

e W

idth

Min

imum

Carr

iage W

idth

Heig

ht

Weig

ht

Model

Sid

e V

isib

ility

Centr

e o

f G

ravi

ty

Vert

ical

FP25X9A 2500 500 350 - 825 940 830 729 88 36 354 60 322 2 A

FP2510A 2500 500 350 - 925 1040 910 729 94 36 354 60 322 2 A

FP2511A 2500 500 350 - 1035 1150 960 729 100 36 355 60 322 2 A

FP2512A 2500 500 350 - 1120 1245 960 729 133 39 316 66 272 2 A

FP2514A 2500 500 350 - 1275 1400 1050 729 145 39 315 66 272 2 A

Forks: Max. length 16000 mm. Add-on price per each 100 mm length increase

FP3510B 3500 500 380 - 975 1100 890 854 121 38 429 67 415 3 A

FP3511B 3500 500 380 - 1025 1150 890 854 125 38 429 67 415 3 A

FP3512B 3500 500 380 - 1120 1245 1090 854 132 38 430 67 415 3 A

FP3513B 3500 500 380 - 1225 1350 1090 854 140 38 431 67 415 3 A


FP4911B 4900 500 415 - 980 1150 850 954 203 47 421 77 365 3 A

FP4912B 4900 500 415 - 1075 1245 900 954 214 47 420 77 365 3 A

FP4913B 4900 500 415 - 1180 1350 970 954 226 47 419 77 365 3 A

FP4915B 4900 500 415 - 1380 1550 1200 954 250 46 417 77 365 3 A

FP4916B 4900 500 415 - 1490 1660 1260 954 262 46 415 77 365 3 A


3-11

3

Fork Positioners


bar mounted forks

Models FN

Notes:

Weight, effective thickness and centre of gravity are given without forks.

One hydraulic function.

Standard forks:

FN25: 1200 x 120 x 40 mm

FN35: 1200 x 120 x 45 mm

FN49: 1200 x 150 x 50 mm

Other fork lengths are available on request.



Check valve for low clamping pressures max 5,0 MPa is available on request.


• Non-sideshifting.

• Bar mounted forks.



bushings.

• For handling of palletised loads.

• For handling of horizontal drums

and coils with the addition of a

check valve.


versatility.

• Forks included in the supply can be

fitted on lower rollers (on option).

FN25X9A 2500 500 350 - 825 940 830 729 88 35 356 60 322 2 A

FN2510A 2500 500 350 - 925 1040 910 729 94 35 356 60 322 2 A

FN2511A 2500 500 350 - 1035 1150 960 729 100 35 357 60 322 2 A

FN2512A 2500 500 350 - 1120 1245 960 729 133 38 317 66 272 2 A

FN2514A 2500 500 350 - 1275 1400 1050 729 145 38 316 66 272 2 A


FN3510B 3500 500 380 - 975 1100 890 854 121 37 431 67 415 3 A

FN3511B 3500 500 380 - 1025 1150 890 854 125 37 431 67 415 3 A

FN3512B 3500 500 380 - 1120 1245 1090 854 132 37 432 67 415 3 A

FN3513B 3500 500 380 - 1225 1350 1090 854 140 37 433 67 415 3 A


FN4911B 4900 500 415 - 980 1150 850 954 200 47 422 77 365 3 A

FN4912B 4900 500 415 - 1075 1245 900 954 211 47 421 77 365 3 A

FN4913B 4900 500 415 - 1180 1350 970 954 223 47 420 77 365 3 A

FN4915B 4900 500 415 - 1380 1550 1200 954 248 46 418 77 365 3 A

FN4916B 4900 500 415 - 1490 1660 1260 954 260 46 417 77 365 3 A


Q BP B I FL D W HCG VCG LL U ISO


Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Tota

lF

ram

e W

idth

Min

imum

Carr

iage W

idth

Heig

ht

Weig

ht

Model

Sid

e V

isib

ility

Centr

e o

f G

ravi

ty

Vert

ical

3-12

3

Fork Positioners

Sideshifting fork positioner bar type,

with fork supports

Model FF

• Double shaft bar type fork positioner. • Accurate fork positioning, thanks

to the hydraulic adjustment of the forks within the width of the truck.

• For handling of palletised loads.• Excellent visibility, strength and

versatility.• Separate side shift.• Standard lift truck forks can be

fitted, without any modification.

I

B

A

HCG

LL

Capaci

ty

Weig

ht

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Fra

me W

idth

Min

imum

Carr

iage W

idth

Support

Wid

th

Sid

esh

ift S

troke

Model

FF 25 095 A 2500 500 320-860 950 780 120 75+75 168 44 120 2

FF 25 105 A 2500 500 320-960 1050 780 120 75+75 178 43 120 2

FF 25 115 A 2500 500 320-1060 1150 1000 120 100+100 188 43 120 2

FF 25 120 A 2500 500 320-1110 1200 1000 120 100+100 193 42 120 2

FF 25 130 A 2500 500 320-1210 1300 1000 120 100+100 198 42 120 2

FF 25 140 A 2500 500 320-1310 1400 1300 120 100+100 203 42 120 2

FF 35 110 B 3500 500 320-1010 1100 1000 120 100+100 205 40 128 3

FF 35 115 B 3500 500 320-1060 1150 1000 120 100+100 210 40 128 3

FF 35 125 B 3500 500 320-1160 1250 1000 120 100+100 220 39 128 3

FF 35 135 B 3500 500 320-1260 1350 1000 120 100+100 230 39 128 3

FF 35 140 B 3500 500 320-1310 1400 1000 120 100+100 239 38 128 3

FF 35 150 B 3500 500 320-1410 1500 1300 120 100+100 267 36 128 3

FF 35 160 B 3500 500 320-1510 1600 1300 120 100+100 293 35 128 3

FF 45 110 B 4500 600 360-1010 1100 1000 140 100+100 240 51 138 3

FF 45 120 B 4500 600 360-1110 1200 1000 140 100+100 252 50 138 3

FF 45 135 B 4500 600 360-1260 1350 1000 140 100+100 270 49 138 3

FF 45 140 B 4500 600 360-1310 1400 1000 140 100+100 276 49 138 3

FF 45 150 B 4500 600 360-1410 1500 1300 140 100+100 316 46 138 3

FF 45 180 B 4500 600 360-1710 1800 1450 140 100+100 352 44 138 3

Q BP B I FL A S W HCG LL ISO

kg mm mm mm mm mm mm Kg mm mm 2328

Horizo

nta

lC

entr

e o

f G

ravi

ty

3-13

3

Fork Positioners

Sideshifting fork positioner bar type,

with fork supports

Model FFC

apaci

ty

Weig

ht

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Fra

me W

idth

Min

imum

Carr

iage W

idth

Support

Wid

th

Sid

esh

ift S

troke

Model

FF 60 130 B 6000 600 380-1200 1300 1350 150 100+100 450 64 154 4

FF 60 140 B 6000 600 380-1300 1400 1350 150 100+100 467 64 154 4

FF 60 150 B 6000 600 380-1400 1500 1350 150 100+100 484 64 154 4

FF 60 170 B 6000 600 380-1600 1700 1350 150 100+100 518 63 154 4

FF 60 180 B 6000 600 380-1700 1800 1350 150 100+100 535 63 154 4

FF 60 200 B 6000 600 380-1900 2000 1830 150 100+100 597 62 154 4

FF 60 220 B 6000 600 380-2100 2200 2070 150 100+100 659 62 154 4

Q BP B I FL A S W HCG LL ISO

kg mm mm mm mm mm mm Kg mm mm 2328

Horizo

nta

lC

entr

e o

f G

ravi

ty

Notes: Two hydraulic functions required.The unit is not suitable for clamping.

Standard fittings:Lower adjustable hooks.Adjustable fork stops (max. forks width A + 10 mm).Arm carriers are predrilled with 3 and 4 holes.It is recommended that extra wide forks are bolted-on.

On request:Other capacities and opening ranges.Load backrest.Quick disconnect lower hooks.Special drill holes.Valve protection.Design with telescopic forks.

Model Forks dimension Fork section

for forks length > 1500 mm

mm mm

FFZ 25... 120x40x1200 120x50

FFZ 35... 120x45x1200 120x50

FFZ 45... 140x50x1200 150x50

FFZ 60... 130x60x1200 150x60

Version with bolt-on forks, model becomes FFZ....

Options:

Bolt-on forks, with 3 bolts, available:

3-14

3

Fork Positioners

Sideshifting heavy-duty fork positioners


Models SF-R

• Sideshifting heavy-duty fork positioner

with bar mounted forks.

• Integral sideshift improves handling

operations.

• ISO 2328 mounting to the lift truck

carriage.

• Forks sliding on an upper chromed

bar and lower rollers.

• Sliding bushings and rollers with

greasers.

SF20R094 2000 500 371-846 1200x100x40 940 640 214 233 263 124 2A

SF20R104 2000 500 371-946 1200x100x40 1040 640 220 211 278 124 2A

SF20R115 2000 500 371-1056 1200x100x40 1150 640 227 206 283 124 2A

SF20R124 2000 500 371-1151 1200x100x40 1245 640 233 201 288 124 2A

SF20R135 2000 500 371-1256 1200x100x40 1350 640 240 197 293 124 2A

SF20R140 2000 500 441-1306 1200x100x40 1400 640 243 195 296 124 2A


SF25R094 2500 500 371-846 1200x100x45 940 640 225 227 266 129 2A

SF25R104 2500 500 371-946 1200x100x45 1040 640 232 221 270 129 2A

SF25R115 2500 500 371-1056 1200x100x45 1150 640 239 216 276 129 2A

SF25R124 2500 500 371-1151 1200x100x45 1245 640 245 212 281 129 2A

SF25R135 2500 500 371-1256 1200x100x45 1350 640 251 207 286 129 2A

SF25R140 2500 500 441-1306 1200x100x45 1400 640 255 205 288 129 2A


SF35R110 3500 500 361-996 1200x120x50 1100 754 346 231 313 145 3A

SF35R115 3500 500 361-1046 1200x120x50 1150 754 350 229 316 145 3A

SF35R124 3500 500 361-1141 1200x120x50 1245 754 357 225 320 145 3A

SF35R135 3500 500 361-1246 1200x120x50 1350 754 366 221 325 145 3A

SF35R140 3500 500 431-1296 1200x120x50 1400 754 370 219 328 145 3A

SF35R147 3500 500 361-1366 1200x120x50 1470 754 375 217 331 145 3A


Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Fork

Length

xS

ect

ion

Fra

me W

idth

Heig

ht

Weig

ht

Model

Sid

esh

ift S

troke

Centr

e o

f G

ravi

ty

Vert

ical

Q BP B LxAxE S I D W HCG VCG LL ISO

kg mm mm mm mm mm mm kg mm mm mm 2328

Note:

Two hydraulic functions required.

Depending on fork opening position.

Available version without pin-type forks, with ISO2328 fork supports.

3-15

3

SF40F12 4000 600 370-1070 1200X125X50 1200 1000 793 457 154 320 185 3A

SF40F13 4000 600 370-1170 1200X125X50 1300 1000 793 468 153 324 185 3A

SF40F14 4000 600 370-1270 1200X125X50 1400 1000 793 479 150 326 185 3A

SF40F15 4000 600 370-1370 1200X125X50 1500 1000 793 490 148 330 185 3A

SF40F16 4000 600 370-1470 1200X125X50 1600 1000 793 502 146 334 185 3A


SF50F14 5000 600 410-1270 1200x150x50 1400 1000 844 520 167 367 185 4A

SF50F15 5000 600 410-1370 1200x150x50 1500 1000 844 532 165 371 185 4A

SF50F16 5000 600 410-1470 1200x150x50 1600 1000 844 544 162 374 185 4A

SF50F17 5000 600 410-1570 1200x150x50 1700 1000 844 554 160 377 185 4A

SF50F18 5000 600 410-1670 1200x150x50 1800 1000 844 565 158 379 185 4A


SF70F18 7000 600 480-1620 1200x150x60 1800 1000 862 753 132 411 215 4A

SF70F19 7000 600 480-1720 1200x150x60 1900 1000 862 771 131 414 215 4A

SF70F20 7000 600 480-1820 1200x150x60 2000 1000 862 789 130 416 215 4A

SF70F21 7000 600 480-1920 1200x150x60 2100 1000 862 806 129 419 215 4A

SF70F22 7000 600 480-2020 1200x150x60 2200 1000 862 825 128 422 215 4A


SF80F19 8000 600 480-1720 1200x150x70 1900 1000 862 803 147 413 225 4A

SF80F20 8000 600 480-1820 1200x150x70 2000 1000 862 821 144 416 225 4A

SF80F21 8000 600 480-1920 1200x150x70 2100 1000 862 838 143 418 225 4A

SF80F22 8000 600 480-2020 1200x150x70 2200 1000 862 857 141 420 225 4A


Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Fork

Length

xS

ect

ion

Fra

me W

idth

Min

imum

Carr

iage W

idth

Heig

ht

Weig

ht

Model

Sid

esh

ift S

troke

Centr

e o

f G

ravi

ty

Vert

ical

Q BP B LxAxE S I FL D W HCG VCG LL ISO

kg mm mm mm mm mm mm mm kg mm mm mm 2328

Fork Positioners

Sideshifting heavy-duty fork

positioners with bar mounted forks

Models SF-F

Q

L

D

LL

HCG

VCG

BP

E

A

B MAX

I

B MIN


Load backrest available, see page 3-28.

Other capacities available on request.


• Sideshifting heavy-duty fork

positioner with bar mounted forks.

• Integral sideshift


carriage.

• Built-in sideshift improves handling.

3-16

3

SF40A12 4000 600 410-1020 125 1200 1000 793 373 60 411 196 3

SF40A13 4000 600 410-1120 125 1300 1000 793 384 59 413 196 3

SF40A14 4000 600 410-1220 125 1400 1000 793 395 59 415 196 3

SF40A15 4000 600 410-1320 125 1500 1000 793 407 59 416 196 3

SF40A16 4000 600 410-1420 125 1600 1000 793 418 59 418 196 3

SF50A14 5000 600 460-1220 150 1400 1000 844 403 60 454 201 4

SF50A15 5000 600 460-1320 150 1500 1000 844 414 61 457 201 4

SF50A16 5000 600 460-1420 150 1600 1000 844 426 59 458 201 4

SF50A17 5000 600 460-1520 150 1700 1000 844 437 59 459 201 4

SF50A18 5000 600 460-1620 150 1800 1000 844 447 59 461 201 4

SF70A18 7000 600 480-1570 150 1800 1000 862 636 79 487 250 4

SF70A19 7000 600 480-1670 150 1900 1000 862 654 78 489 250 4

SF70A20 7000 600 480-1770 150 2000 1000 862 672 78 490 250 4

SF70A21 7000 600 480-1870 150 2100 1000 862 689 78 492 250 4

SF70A22 7000 600 480-1970 150 2200 1000 862 708 77 493 250 4

SF80A19 8000 600 480-1670 150 1900 1000 862 654 78 489 250 4

SF80A20 8000 600 480-1770 150 2000 1000 862 672 78 490 250 4

SF80A21 8000 600 480-1870 150 2100 1000 862 689 78 492 250 4

SF80A22 8000 600 480-1970 150 2200 1000 862 708 77 493 250 4

Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Fork

Adapte

rW

idth

Fra

me W

idth

Min

imum

Carr

iage W

idth

Heig

ht

Weig

ht

Model

Sid

esh

ift S

troke

Q BP B A S I FL D W HCG VCG LL ISO

kg mm mm mm mm mm mm mm kg mm mm mm 2328 C

entr

e o

f G

ravi

ty

Vert

ical

Fork Positioners


with bar mounted fork carriers

Models SF-A

Two hydraulic functions required. Load backrest available, see page 3-28.





positioner with bar mounted ISO

2328 fork carriers.

• Integral sideshift.

• Possibility to use the standard

forks of the lift truck.

• ISO 2328 mounting to the lift truck.


3-17

3

Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Fork

Length

xS

ect

ion

Fra

me W

idth

Min

imum

Carr

iage W

idth

Heig

ht

Weig

ht

Model

Sid

esh

ift S

troke

Centr

e o

f G

ravi

ty

Vert

ical



SG40F12 4000 600 370-1070 1200X125X50 150+150 1200 1000 844 554 153 325 200 3A

SG40F13 4000 600 370-1170 1200X125X50 150+150 1300 1000 844 565 152 329 200 3A

SG40F14 4000 600 370-1270 1200X125X50 150+150 1400 1000 844 576 149 331 200 3A

SG40F15 4000 600 370-1370 1200X125X50 150+150 1500 1000 844 587 147 335 200 3A

SG40F16 4000 600 370-1470 1200X125X50 150+150 1600 1000 844 599 145 339 200 3A


SG50F14 5000 600 410-1270 1200x150x50 150+150 1400 1000 895 617 166 372 200 4A

SG50F15 5000 600 410-1370 1200x150x50 150+150 1500 1000 895 629 164 376 200 4A

SG50F16 5000 600 410-1470 1200x150x50 150+150 1600 1000 895 641 161 379 200 4A

SG50F17 5000 600 410-1570 1200x150x50 150+150 1700 1000 895 651 159 382 200 4A

SG50F18 5000 600 410-1670 1200x150x50 150+150 1800 1000 895 662 157 384 200 4A


SG70F18 7000 600 480-1620 1200x150x60 150+150 1800 1000 913 872 131 416 230 4A

SG70F19 7000 600 480-1720 1200x150x60 150+150 1900 1000 913 890 130 419 230 4A

SG70F20 7000 600 480-1820 1200x150x60 150+150 2000 1000 913 909 129 421 230 4A

SG70F21 7000 600 480-1920 1200x150x60 150+150 2100 1000 913 925 128 426 230 4A

SG70F22 7000 600 480-2020 1200x150x60 150+150 2200 1000 913 945 127 428 230 4A


SG80F19 8000 600 480-1720 1200x150x70 150+150 1900 1000 913 923 146 418 240 4A

SG80F20 8000 600 480-1820 1200x150x70 150+150 2000 1000 913 941 143 421 240 4A

SG80F21 8000 600 480-1920 1200x150x70 150+150 2100 1000 913 958 142 423 240 4A

SG80F22 8000 600 480-2020 1200x150x70 150+150 2200 1000 913 977 140 425 240 4A


Fork Positioners



Models SG-F





• Built-in separate sideshift improves

handling.


carriage.

3-18

3

Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Fork

Carr

ier

Wid

th

Fra

me W

idth

Min

imum

Carr

iage W

idth

Heig

ht

Weig

ht

Model

Sid

esh

ift S

troke

Centr

e o

f G

ravi

ty

Vert

ical



SG40A12 4000 600 410-1020 125 150+150 1200 1000 844 471 58 426 211 3

SG40A13 4000 600 410-1120 125 150+150 1300 1000 844 482 57 428 211 3

SG40A14 4000 600 410-1220 125 150+150 1400 1000 844 493 57 430 211 3

SG40A15 4000 600 410-1320 125 150+150 1500 1000 844 505 57 431 211 3

SG40A16 4000 600 410-1420 125 150+150 1600 1000 844 516 57 433 211 3

SG50A14 5000 600 460-1220 150 150+150 1400 1000 895 501 59 469 261 4

SG50A15 5000 600 460-1320 150 150+150 1500 1000 895 512 58 472 261 4

SG50A16 5000 600 460-1420 150 150+150 1600 1000 895 524 57 473 261 4

SG50A17 5000 600 460-1520 150 150+150 1700 1000 895 535 57 474 261 4

SG50A18 5000 600 460-1620 150 150+150 1800 1000 895 545 57 476 261 4

SG70A18 7000 600 480-1570 150 150+150 1800 1000 913 756 77 502 271 4

SG70A19 7000 600 480-1670 150 150+150 1900 1000 913 774 76 504 271 4

SG70A20 7000 600 480-1770 150 150+150 2000 1000 913 792 76 505 271 4

SG70A21 7000 600 480-1870 150 150+150 2100 1000 913 809 76 507 271 4

SG70A22 7000 600 480-1970 150 150+150 2200 1000 913 828 75 508 271 4

SG80A19 8000 600 480-1670 150 150+150 1900 1000 913 774 76 504 271 4

SG80A20 8000 600 480-1770 150 150+150 2000 1000 913 792 76 505 271 4

SG80A21 8000 600 480-1870 150 150+150 2100 1000 913 809 76 507 271 4

SG80A22 8000 600 480-1970 150 150+150 2200 1000 913 828 75 508 271 4

Fork Positioners



Models SG-A





2328 fork carriers.


handling.



• ISO 2328 mounting to the lift truck.

3-19

3

SF20Ri094 2000 500 371-846 1200x100x40 940 640 181 233 263 99

SF20Ri104 2000 500 371-946 1200x100x40 1040 640 187 226 269 99

SF20Ri115 2000 500 371-1056 1200x100x40 1150 640 194 219 276 99

SF20Ri124 2000 500 371-1151 1200x100x40 1245 640 200 214 281 99

SF20Ri135 2000 500 371-1256 1200x100x40 1350 640 207 208 288 99

SF20Ri140 2000 500 441-1306 1200x100x40 1400 640 210 205 291 99


SF25Ri094 2500 500 371-846 1200x100x45 940 640 192 244 255 104

SF25Ri104 2500 500 371-946 1200x100x45 1040 640 199 237 261 104

SF25Ri115 2500 500 371-1056 1200x100x45 1150 640 206 230 267 104

SF25Ri124 2500 500 371-1151 1200x100x45 1245 640 212 224 273 104

SF25Ri135 2500 500 371-1256 1200x100x45 1350 640 219 219 279 104

SF25Ri140 2500 500 441-1306 1200x100x45 1400 640 222 216 283 104


SF35Ri110 3500 500 361-996 1200x120x50 1100 754 285 254 299 115

SF35Ri115 3500 500 361-1046 1200x120x50 1150 754 289 251 302 115

SF35Ri124 3500 500 361-1141 1200x120x50 1245 754 296 246 307 115

SF35Ri135 3500 500 361-1246 1200x120x50 1350 754 303 241 313 115

SF35Ri140 3500 500 431-1296 1200x120x50 1400 754 307 239 316 115

SF35Ri147 3500 500 361-1366 1200x120x50 1470 754 312 236 320 115


Integral Fork Positioners



Models SF-Ri

Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Fork

Length

xS

ect

ion

Fra

me W

idth

Heig

ht

Weig

ht

Model

Sid

esh

ift S

troke

Centr

e o

f G

ravi

ty

Vert

ical



• Integral sideshift improves handling

operations.

• Integral mounting adapted to the

lift truck. Minimal lost load distance

ensures maximal residual lifting

capacity.

• Forks sliding on a upper chromed

bar and lower rollers.

• Sliding bushings and rollers with

greasers.



Weight and center of gravity (vertical and horizontal) are given without

the integral mounting.

Attachment price includes an integral mounting without mast rollers.

A complete tecnical description of the mounting is required. Consult

Bolzoni Auramo regarding specifications.

Available version without pin-type forks, with ISO2328 fork supports.

Q BP B LxAxE S I D W HCG VCG LL ISO

kg mm mm mm mm mm mm kg mm mm mm 2328

3-20

3

SF40Fi12 4000 600 370-1070 1200x125x50 1200 * 793 362 190 299 145

SF40Fi13 4000 600 370-1170 1200x125x50 1300 * 793 373 187 304 145

SF40Fi14 4000 600 370-1270 1200x125x50 1400 * 793 384 183 308 145

SF40Fi15 4000 600 370-1370 1200x125x50 1500 * 793 395 179 313 145

SF40Fi16 4000 600 370-1470 1200x125x50 1600 * 793 407 176 318 145

SF40Fi17 4000 600 370-1570 1200x125x50 1700 * 793 419 173 321 145

SF40Fi18 4000 600 370-1670 1200x125x50 1800 * 793 445 170 325 145


SF50Fi14 5000 600 410-1270 1200x150x50 1400 * 844 425 201 360 145

SF50Fi15 5000 600 410-1370 1200x150x50 1500 * 844 437 197 364 145

SF50Fi16 5000 600 410-1470 1200x150x50 1600 * 844 449 193 368 145

SF50Fi17 5000 600 410-1570 1200x150x50 1700 * 844 459 190 372 145

SF50Fi18 5000 600 410-1670 1200x150x50 1800 * 844 470 187 375 145


SF70Fi18 7000 600 480-1620 1200x150x60 1800 * 862 658 151 418 175

SF70Fi19 7000 600 480-1720 1200x150x60 1900 * 862 676 149 421 175

SF70Fi20 7000 600 480-1820 1200x150x60 2000 * 862 694 147 424 175

SF70Fi21 7000 600 480-1920 1200x150x60 2100 * 862 711 146 427 175

SF70Fi22 7000 600 480-2020 1200x150x60 2200 * 862 730 144 430 175

SF70Fi23 7000 600 480-2120 1200x150x60 2300 * 862 749 142 433 175

SF70Fi24 7000 600 480-2220 1200x150x60 2400 * 862 768 140 436 175





Models SF-FiC

apaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Fork

Length

xS

ect

ion

Fra

me W

idth

Min

imum

Carr

iage W

idth

Heig

ht

Weig

ht

Model

Sid

esh

ift S

troke

Centr

e o

f G

ravi

ty

Vert

ical





• Integral sideshift




capacity.


3-21

3

SF80Fi19 8000 600 480-1720 1200x150x70 1900 * 862 698 179 420 185

SF80Fi20 8000 600 480-1820 1200x150x70 2000 * 862 716 176 423 185

SF80Fi21 8000 600 480-1920 1200x150x70 2100 * 862 733 174 426 185

SF80Fi22 8000 600 480-2020 1200x150x70 2200 * 862 752 171 428 185

SF80Fi23 8000 600 480-2120 1200x150x70 2300 * 862 772 170 430 185

SF80Fi24 8000 600 480-2220 1200x150x70 2400 * 862 790 168 432 185


SF120Fi20 12000 600 780-1810 1200x200x75 2000 * 1160 1220 190 362 220

SF120Fi21 12000 600 780-1910 1200x200x75 2100 * 1160 1260 187 366 220

SF120Fi22 12000 600 780-2010 1200x200x75 2200 * 1160 1300 184 370 220

SF120Fi23 12000 600 780-2110 1200x200x75 2300 * 1160 1340 181 373 220

SF120Fi24 12000 600 780-2210 1200x200x75 2400 * 1160 1380 178 377 220

SF120Fi25 12000 600 780-2310 1200x200x75 2500 * 1160 1420 176 380 220





Models SF-Fi



A complete technical description of the mounting is required. Consult





Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Fork

Length

xS

ect

ion

Fra

me W

idth

Min

imum

Carr

iage W

idth

Heig

ht

Weig

ht

Model

Sid

esh

ift S

troke

Centr

e o

f G

ravi

ty

Vert

ical



3-22

3

wSF40Ai12 4000 600 410-1020 125 / 3A 1200 * 793 278 74 428 156 SF40Ai13 4000 600 410-1120 125 / 3A 1300 * 793 289 73 430 156 SF40Ai14 4000 600 410-1220 125 / 3A 1400 * 793 300 72 431 156 SF40Ai15 4000 600 410-1320 125 / 3A 1500 * 793 312 71 432 156 SF40Ai16 4000 600 410-1420 125 / 3A 1600 * 793 323 71 434 156 SF50Ai14 5000 600 460-1220 150 / 4A 1400 * 844 308 73 482 161 SF50Ai15 5000 600 460-1320 150 / 4A 1500 * 844 319 73 485 161 SF50Ai16 5000 600 460-1420 150 / 4A 1600 * 844 331 72 485 161 SF50Ai17 5000 600 460-1520 150 / 4A 1700 * 844 342 71 486 161 SF50Ai18 5000 600 460-1620 150 / 4A 1800 * 844 352 71 487 161 SF70Ai18 7000 600 480-1570 150 / 4A 1800 * 862 531 91 511 210 SF70Ai19 7000 600 480-1670 150 / 4A 1900 * 862 549 90 512 210 SF70Ai20 7000 600 480-1770 150 / 4A 2000 * 862 567 89 513 210 SF70Ai21 7000 600 480-1870 150 / 4A 2100 * 862 584 89 514 210 SF70Ai22 7000 600 480-1970 150 / 4A 2200 * 862 603 88 515 210 SF80Ai19 8000 600 480-1670 150 / 4A 1900 * 862 549 90 512 210 SF80Ai20 8000 600 480-1770 150 / 4A 2000 * 862 567 89 513 210 SF80Ai21 8000 600 480-1870 150 / 4A 2100 * 862 584 89 514 210 SF80Ai22 8000 600 480-1970 150 / 4A 2200 * 862 603 88 515 210




Models SF-Ai



2328 fork carriers.

• Integral sideshift.



• Integral mounting adapted to the lift

truck. Small lost-load distance with

profitable residual lifting capacity.



Attachment price includes an integral mounting without mast rollers. A complete technical description of the mounting is required. Contact Bolzoni Auramo regarding specifications.

Weight and center of gravity (vertical and horizontal) are given without forks and integral mounting.

For other fork carrier and fork widths, please consult Bolzoni Auramo. Depending on fork opening position.

Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Fork

Adapte

rW

idth

/Cla

ss

Fra

me W

idth

Min

imum

Carr

iage W

idth

Heig

ht

Weig

ht

Model

Sid

esh

ift S

troke

Centr

e o

f G

ravi

ty

Vert

ical


kg mm mm mm/ISO2328 mm mm mm mm kg mm mm mm 2328

3-23

3


Heavy-duty fork positioners with

separate sideshift

Models SG-Fi

SG50Fi14 5000 600 410-1270 1200x150x50 150+150 1400 * 895 523 200 365 160

SG50Fi15 5000 600 410-1370 1200x150x50 150+150 1500 * 895 535 196 369 160

SG50Fi16 5000 600 410-1470 1200x150x50 150+150 1600 * 895 547 192 373 160

SG50Fi17 5000 600 410-1570 1200x150x50 150+150 1700 * 895 557 189 377 160

SG50Fi18 5000 600 410-1670 1200x150x50 150+150 1800 * 895 568 188 380 160


SG70Fi18 7000 600 480-1620 1200x150x60 150+150 1800 * 913 778 150 423 190

SG70Fi19 7000 600 480-1720 1200x150x60 150+150 1900 * 913 796 148 426 190

SG70Fi20 7000 600 480-1820 1200x150x60 150+150 2000 * 913 814 146 429 190

SG70Fi21 7000 600 480-1920 1200x150x60 150+150 2100 * 913 831 145 432 190

SG70Fi22 7000 600 480-2020 1200x150x60 150+150 2200 * 913 850 143 435 190


SG80Fi19 8000 600 480-1720 1200x150x70 150+150 1900 * 913 818 178 425 200

SG80Fi20 8000 600 480-1820 1200x150x70 150+150 2000 * 913 836 175 428 200

SG80Fi21 8000 600 480-1920 1200x150x70 150+150 2100 * 913 853 173 431 200

SG80Fi22 8000 600 480-2020 1200x150x70 150+150 2200 * 913 872 170 433 200


Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Fork

Length

xS

ect

ion

Fra

me W

idth

Min

imum

Carr

iage W

idth

Heig

ht

Weig

ht

Model

Sid

esh

ift S

troke

Centr

e o

f G

ravi

ty

Vert

ical



• Heavy-duty fork positioner with

separate sideshift.

• Pin-mounted forks.




capacity.


handling.



A complete technical description of the mounting is required. Consult




3-24

3

SG50Ai14 5000 600 460-1220 150 / 4A 150+150 1400 - 895 406 71 497 176

SG50Ai15 5000 600 460-1320 150 / 4A 150+150 1500 - 895 417 71 500 176

SG50Ai16 5000 600 460-1420 150 / 4A 150+150 1600 - 895 429 70 500 176

SG50Ai17 5000 600 460-1520 150 / 4A 150+150 1700 - 895 440 69 501 176

SG50Ai18 5000 600 460-1620 150 / 4A 150+150 1800 - 895 450 69 502 176

SG70Ai18 7000 600 480-1570 150 / 4A 150+150 1800 - 913 651 89 526 225

SG70Ai19 7000 600 480-1670 150 / 4A 150+150 1900 - 913 669 88 527 225

SG70Ai20 7000 600 480-1770 150 / 4A 150+150 2000 - 913 687 87 528 225

SG70Ai21 7000 600 480-1870 150 / 4A 150+150 2100 - 913 704 87 529 225

SG70Ai22 7000 600 480-1970 150 / 4A 150+150 2200 - 913 723 86 530 225

SG80Ai19 8000 600 480-1670 150 / 4A 150+150 1900 - 913 669 88 527 225

SG80Ai20 8000 600 480-1770 150 / 4A 150+150 2000 - 913 687 87 528 225

SG80Ai21 8000 600 480-1870 150 / 4A 150+150 2100 - 913 704 87 529 225

SG80Ai22 8000 600 480-1970 150 / 4A 150+150 2200 - 913 723 86 530 225

Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Fork

Adapte

rW

idth

/Cla

ss

Fra

me W

idth

Min

imum

Carr

iage W

idth

Heig

ht

Weig

ht

Model

Sid

esh

ift S

troke

Centr

e o

f G

ravi

ty

Vert

ical


kg mm mm mm/ISO2328 mm mm mm mm kg mm mm mm 2328




Models SG-Ai

• Sideshifting heavy-duty fork positioner with bar mounted ISO 2328 fork carriers.

• Built-in separate sideshift improves handling.

• Possibility to use the standard forks of the lift truck.

• Integral mounting adapted to the lift truck. Small lost-load distance with profitable residual lifting capacity.



A complete technical description of the mounting is required. Contact



the forks and integral mounting.


3-25

3

RP 15 100A 1500 500 320-910 1200x120x40 1000 900 370 219 238 2

RP 15 110A 1500 500 320-1010 1200x120x40 1100 900 380 216 238 2

RP 15 120A 1500 500 320-1110 1200x120x40 1200 900 390 213 238 2

Additional price for 100 mm fork section 120x40 up to max 1500 mm length.

Additional price for 100 mm fork section 125x45 more than 1500 mm up to 2400 mm length.

RP 22 110A 2200 500 320-1010 1200x120x45 1100 900 395 220 243 2

RP 22 120A 2200 500 320-1110 1200x120x45 1200 900 405 217 243 2

RP 22 130A 2200 500 320-1210 1200x120x45 1300 900 415 214 243 2



RP 35 110B 3500 500 320-1010 1200x120x50 1100 950 546 210 261 3

RP 35 120B 3500 500 320-1110 1200x120x50 1200 950 560 202 261 3

RP 35 130B 3500 500 320-1210 1200x120x50 1300 950 574 194 261 3



RP 40 112B 4000 600 360-1010 1200x140x50 1120 1100 820 195 284 3

RP 40 122B 4000 600 360-1110 1200x140x50 1210 1100 832 190 284 3

RP 40 132B 4000 600 360-1210 1200x140x50 1310 1100 844 185 284 3

RP 40 142B 4000 600 360-1310 1200x140x50 1410 1100 856 180 284 3

Capaci

ty

Centr

e o

f G

ravi

ty

Horizo

nta

l

Effect

ive

Thic

kness

Mountin

gC

lass

Load C

entr

e

Openin

g R

ange

Fork

Length

x S

ect

ion

Fra

me W

idth

Heig

ht

Weig

ht

Model

Q BP B LxAxE I D W HCG LL ISO

kg mm mm mm mm mm kg mm mm 2328

Fork Positioners

360° Rotating fork positioner

Models RP

Standard fittings:


• The 360° rotating fork positioner

is very versatile, thanks to the

hydraulic adjustment of the forks

within the width of the truck.

• The 360° continuous rotation

enables flexibilitis and discharge.

• The forks are bolted-on to the

slinding profiles.

• Easy maintenance and excellent

visibility of the unit.

• Separate side shift on reques.

On request:

Separate sideshift.

Solenoid valve.

Solenoid valve control kit.

Motor and brake protection.

Special openings.

Pressure gauge.

Quick disconnect lower hooks.

Bolt-on forks and different forks lengths.

3-26

3

Fork Positioners

Technical Information

Oil flow rate recommendations

Model Oil Flow Rate, Fork Positioner Oil Flow Rate, Sideshifter Minimum Recommended Maximum Minimum Recommended Maximum l/min l/min l/min l/min l/min l/minSideshifters

HN 2-4-5 - - - 4 10 15HN 6 - - - 6 12 20HN 7-8 - - - 7 14 16SS 25-35 - - - 6 12 20Fork Positioners

FZ 10 18 25 4 10 15FR 25-35 10 18 25 4 10 15FR 49 12 20 30 6 12 20FK 25-35 10 18 25 - - -FK 49 12 20 30 - - -FFP 25-35 10 18 25 4 10 15FFP 49 12 20 30 6 12 20FFN 25-35 10 18 25 - - -FFN 49 12 20 30 - - -FP 25-35 10 18 25 4 10 15FP 49 12 20 30 6 12 20FN 25-35 10 18 25 - - -FN 49 12 20 30 - - -FF 25 15 20 25 15 20 25FF 35 25 30 35 25 30 35FF 45 35 40 45 35 40 45FF 60 45 50 55 45 50 55SF-R 10 18 25 10 18 25SF 40-50-70-80 20 40 50 20 40 50SF 120 30 50 70 30 50 70SG 40-50-70-80 20 40 50 20 40 50SG 120 30 50 70 30 50 70KB 14-20-25 10 18 25 - - - KB 28-38-50 12 20 30 - - -KS 14-20-25 10 18 25 4 10 15KS 28-38-50 12 20 30 6 12 20

Model Oil Flow Rate, Fork Positioner Oil Flow Rate, Rotator Minimum Recommended Maximum Minimum Recommended Maximum l/min l/min l/min l/min l/min l/minRotating

RP 15 15 20 25 15 20 25RP 22 20 25 30 15 20 25RP 35-40 25 30 35 25 30 35

3-27

3

Hydraulic functions and hydraulic pressure recommendations

Model Fork Positioner Distributor Sideshifting Distributor Hydraulic Pressure Pressure Pressure Pressure Functions Minimum Maximum Maximum Minimum Maximum Maximum MPa MPa MPa MPa MPa MPa Sideshifters

HN 2-4-5 - - - 12,0 22,0 25,0 1HN 6 - - - 12,0 22,0 25,0 1HN 7-8 - - - 7,0 22,0 25,0 1SS 25-35 - - - 12,0 22,0 25,0 2Fork Positioners

FZ 3,0 5,0 25,0 12,0 22,0 25,0 2FR 25-35 3,0 5,0 25,0 12,0 22,0 25,0 2FR 49 3,0 5,0 25,0 12,0 22,0 25,0 2FK 25-35 3,0 5,0 25,0 - - - 1FK 49 3,0 5,0 25,0 - - - 1FFP 25-35 3,0 5,0 25,0 12,0 22,0 25,0 2FFP 49 3,0 5,0 25,0 12,0 22,0 25,0 2FFN 25-35 3,0 5,0 25,0 - - - 1FFN 49 3,0 5,0 25,0 - - - 1FP 25-35 3,0 5,0 25,0 12,0 22,0 25,0 2FP 49 3,0 5,0 25,0 12,0 22,0 25,0 2FN 25-35 3,0 5,0 25,0 - - - 1FN 49 3,0 5,0 25,0 - - - 1FF 25 - 10,0 12,0 - 10,0 12,0 2FF 35 - 10,0 12,0 - 10,0 12,0 2FF 45 - 10,0 12,0 - 10,0 12,0 2FF 60 - 10,0 12,0 - 10,0 12,0 2SF-R 3,0 5,0 25,0 3,0 15,0 25,0 2SF 40-50-70-80 5,0 16,0 23,0 10,0 12,0 23,0 2SF 120 5,0 16,0 23,0 10,0 12,0 23,0 2SG 40-50-70-80 5,0 16,0 23,0 10,0 16,0 23,0 2SG 120 5,0 16,0 23,0 10,0 16,0 23,0 2KB 14-20-25 4,0 14,0 25,0 - - - 1KB 28-38-50 4,0 14,0 25,0 - - - 1KS 14-20-25 4,0 14,0 25,0 12,0 22,0 25,0 2KS 28-38-50 4,0 14,0 25,0 12,0 22,0 25,0 2

Fork Positioners

Technical Information

Model Fork Positioner Distributor Rotation Distributor Hydraulic Pressure Pressure Pressure Pressure Functions Minimum Maximum Maximum Minimum Maximum Maximum MPa MPa MPa MPa MPa MPa Rotating

RP 15 10 12 25 13,0 17,0 25,0 2RP 22 10 12 25 13,0 17,0 25,0 2RP 35-40 10 12 25 13,0 17,0 25,0 2

3-28

3

Fork Positioners

Accessories and Options

Sideshifter Options

Model

Special sideshift strokes

Special frame widths

Fork Positioner Options

Model

Special opening ranges

Special frame widths

High capacity models

Forks and Fork Adapters

Model

Special fork lengths

Special fork sizes

Knife forks

Forks with chamfers

Extended fork back

Bolt-on forks

Special forks

Special fork adapters

Mounting Options

Consult Bolzoni Auramo for the availability of non-standard

or special mountings. These mountings are not included

in the attachment price. For a non-standard mounting,

detailed information is required from customer.

Hydraulic Options

Installation kit

for two hydraulic functions (standard fittings)

An installation kit for two hydraulic functions contains 4

hoses. Length of the hoses is 600 mm. Other hose sizes

and lengths are available on request.

Number

12 L

15 L

Pressure relief valve

Pressure relief valve for one hydraulic function. Choose

this option if the lift truck hydraulic pressure exceeds the

maximum connection pressure of the attachment.

Number

On request

Load backrests for sideshifters

Load backrest protects the load and driver. Given heights

are measured from ground.

Mounting class

ISO 2328 1/2

ISO 2328 3

Load backrests for fork positioners models

FR-FK / FFP-FFN / FP-FN/FF

Load backrest protects the load and driver. Factory

mounting only. Given heights are fork positioner total

heights measured from ground. Other heights and special

models are available on request. For other fork positioner

models, please consult Bolzoni Auramo.

Mounting class

ISO 2328 2

ISO 2328 3

ISO 2328 4

Load backrests for fork positioners models

SF/SG

Mounting class

ISO 2328 3

ISO 2328 4

ISO 2328 lower quick disconnect hooks

available for sideshift and fork positioners KB-KS/FZ-FR-FK/

FFP-FFN/FP-FN/FF, the lower quick disconnect hooks can be

manually opened.

Model

ISO 2328 2

ISO 2328 3

ISO 2328 4

fork positioners, clamp based sideshifting wide opening ... vidlic.pdf• iso 2328 fork carriers....

Documents