ford lehman model 2715eholodeck4sale.weebly.com/uploads/1/2/2/4/12248826/... · ford lehman model...

2
Ford Lehman Model 2715E Port Engine S/N 2104/66 Stbd Engine S/N 2104/242 Oil & Filter Replacement Procedure Main Oil Filters (Engine Mounted): To remove oil: 1. Run engine for 10-15 minutes to warm up the oil for easier draining. 2. Un-secure oil pan drain hose to be accessible. 3. Prep the oil pump hose & bucket for draining oil. 4. Remove cap from oil pan drain hose using 13/16 th ” wrench and connect the two hoses together. 5. Turn on pump to suck oil from the engine’s oil pan to the bucket. a. Be careful as not to overflow the bucket. b. You may have to empty oil from the bucket to your discard able containers and repeat the procedure until all oil has been removed. 6. Remove & discard the OIL FILTER using oil removal wrench. 7. Clean up any mess before replacing filter and oil. To replace filter and oil: 1. Moisten the O-ring on the oil filter with fresh oil 2. Replace Filter by spinning on (screwing on) the filter to the mounting plate. 3. Tighten until hand tight and then a quarter of additional turn. 4. Prep 11 quarts of oil for refilling. 5. Remove oil cap at top of valve cover. 6. Refill with 11 quarts of oil and have one in reserve to top off if necessary. 7. Start and run engine for 10 – 15 minutes. 8. Check oil level and tweak it with the 12 th quart of oil as needed. The Injection Pump assembly should be checked as well. Drain the old oil from here. Loosen this plug Watch for oil as you refill the reservoir. Remove and fill from this plug. DO NOT OVERFILL…. Lehman Oil Servicing.doc 2/20/2017 Drain Hose Cap Oil Filter

Upload: others

Post on 08-Oct-2020

7 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: Ford Lehman Model 2715Eholodeck4sale.weebly.com/uploads/1/2/2/4/12248826/... · Ford Lehman Model 2715E Port Engine S/N 2104/66 Stbd Engine S/N 2104/242 Oil & Filter Replacement Procedure

Ford Lehman Model 2715E

Port Engine S/N 2104/66 Stbd Engine S/N 2104/242

Oil & Filter Replacement Procedure

Main Oil Filters (Engine Mounted):

To remove oil:1. Run engine for 10-15 minutes to warm up the oil for easier draining.2. Un-secure oil pan drain hose to be accessible.3. Prep the oil pump hose & bucket for draining oil.4. Remove cap from oil pan drain hose using 13/16th” wrench and connect the two hoses together.5. Turn on pump to suck oil from the engine’s oil pan to the bucket.

a. Be careful as not to overflow the bucket.b. You may have to empty oil from the bucket to your

discard able containers and repeat the procedure untilall oil has been removed.

6. Remove & discard the OIL FILTER using oil removalwrench.

7. Clean up any mess before replacing filter and oil.

To replace filter and oil:1. Moisten the O-ring on the oil filter with fresh oil2. Replace Filter by spinning on (screwing on) the filter to the

mounting plate.3. Tighten until hand tight and then a quarter of additional turn.4. Prep 11 quarts of oil for refilling.5. Remove oil cap at top of valve cover.6. Refill with 11 quarts of oil and have one in reserve to top off if necessary.7. Start and run engine for 10 – 15 minutes.8. Check oil level and tweak it with the 12th quart of oil as needed.

The Injection Pump assembly should be checked as well.

Drain the old oil from here.

Loosen this plug

Watch for oil as you refill the reservoir.

Remove and fill from this plug.

DO NOT OVERFILL….

Lehman Oil Servicing.doc 2/20/2017

Drain Hose Cap

Oil Filter

Page 2: Ford Lehman Model 2715Eholodeck4sale.weebly.com/uploads/1/2/2/4/12248826/... · Ford Lehman Model 2715E Port Engine S/N 2104/66 Stbd Engine S/N 2104/242 Oil & Filter Replacement Procedure

Tools Needed

RagsOil Removal PumpFilter Removal Tool2 Crescent Wrench’s for Drain Hose capHeavy Slot Screwdriver for the Injection Fill Plug& ½” Wrench for Level & Drain plugs

Parts (Both Engines) Part # or Crossover

2 – Oil Filters (Every 200 hrs) Fram PH8A or PH724 Quarts of Oil or 6 Gals (Every 200 hrs) Rotella 40wt14 oz. Of Oil for Injector Pump Use same oil as Engine OilAdditional crossover secondary filters. NAPA 1374, NAPA 1515, Wix 51515, Baldwin B2,

Baldwin B131, Motorcraft

12/30/1899 Engine Hours Comments

08/20/2000 1594.3 Routine09/01/2001 1798.3 Routine01/24/2002 1829.3 Routine06/12/2004 2526 Routine & Overdue06/25/2006 2810 Routine & Overdue, Did not do Injection Oil.03/04/2009 3045.6 Routine Including Injection Oil 03/29/2010 3200 Routine & Overdue, Did not do Injection Oil.05/17/2011 3401.3 Routine Including Injection Oil 05/15/2012 3574.0 Routine Including Injection Oil 01/12/2014 3700.0 Routine Including Injection Oil (R&R Filters both Engines)06/25/2015 3817 Routine Including Injection Oil (R&R Filters both Engines)10/19/2016 4026 Routine Including Injection Oil (R&R Filters both Engines)

Lehman Oil Servicing.doc 2/20/2017