Force/2 wireless systemoperation instructions

Wireless Remote Operation:

Rev: 09/09

Attach the transmitter to the blowing hose, belt clip or lanyard ( see wireless remote configurations at bottom of page). At the electrical panel, locate the remote bypass switch, position the switch to the wireless remote position (Fig 1), once the remote bypass switch is in the wireless remote position, depress the main control switches (agita-tor & blower) to the “on” position (Fig 2&3). DO NOT PLUG IN STANDARD REMOTE CORD WHEN US-ING WIRELESS FEATURE. Depress the Green buttons on the wireless transmitter to start the motors. NOTE: The main panel switches must be in the “on” position for the machine to operate. At the ground, operator may stop either motor by depressing the main panel switch “red button”.

Remote Cord Operation: Attach the remote cord to the electrical panel (Fig 4). At the electrical panel, locate the remote bypass switch, posi-tion the switch to the remote cord position (Fig 5), once the remote bypass switch is in the remote cord position, depress the main control switches (agitator & blower) to the “on” position (Fig 6&7). Depress the rocker switch on the remote to start the motors. NOTE: The main panel switches (Fig 6&7) must be in the “on” position for the machine to operate. At the ground, operator may stop either motor by depressing the main panel switch “red button”.

LA N Y A R D

HOSE ATTACHMENT BE L T C L I P

Wireless Remote Configurations

Fig 1 Fig 2

Fig 3

Fig 5 Fig 6

Fig 7Fig 4