Slide 1

For Packaging & Shipping of Regulated Medical Waste and Pharmaceutical Waste U.S DOT Hazmat Training

Slide 2

DOT Hazmat Training Requirements Training must be completed within 90 days of employment Employee can perform Hazmat functions (until trained) if directly supervised Retraining is required every three years This training may only be used to meet highway transportation requirements, and is NOT to be used to meet the requirements for air shipment of hazardous materials

Slide 3

Who Needs to be Trained?

Slide 4

DOT Required Training Topics General Awareness & Familiarization Function Specific Safety Security

Slide 5

General Awareness & Familiarization: DOT Hazardous Materials A Hazardous Material is defined as a substance or material that is capable of posing an unreasonable risk to: Safety Health Property When transported in commerce Hazardous Materials are part of most of our daily lives and of most healthcare workplaces Regulated Medical Waste is such a Hazardous Material

Slide 6

Regulated Medical Waste falls into category 6.2 There are NINE hazard classifications used by the Department of Transportation.

Slide 7

Function Specific

Slide 8

Improperly prepared containers should never be accepted for transportation under any circumstance. Examples of unacceptable packaging are: Leaking containers, protruding objects, improperly closed containers, overfilling and mislabeled containers. Packaging Regulated Medical Waste (RMW)

Slide 9

Function Specific A RMW transport container must contain the following: -biohazard symbol -the word Biohazard -ID number -description -orientation arrows *The proper shipping name for RMW is: Regulated Medical Waste, n.o.s.

Slide 10

Function Specific

Slide 11

Slide 12

Slide 13

During transport, the shipping papers must be within reach of the driver or mounted to the drivers side door at all times.

Slide 14

Safety

Slide 15

-ALWAYS use proper Personal Protective Equipment (PPE) when handling hazardous waste materials! -ALWAYS perform hand hygiene after handling hazardous waste!

Slide 16

Safety

Slide 17

All EPA RCRA Hazardous Wastes are also DOT Hazardous Materials while they are in transport, but not vice versa! Ex. RMW (a DOT Hazardous Material) is not defined by EPA as being RCRA Hazardous Waste.

Slide 18

Security Measures Keep RMW storage areas restricted from the general public and unauthorized, untrained personnel Train personnel handling RMW Follow Medical Waste policies and procedures Know your driver: Dont be afraid to ask for ID, watch for unmarked vehicles Make sure all containers are properly packaged, marked and safe for transport before the driver loads them on to the truck For the purposes of this training, please note that a written security plan is not required of workplaces shipping hazardous materials.

Slide 19

In Conclusion

Slide 20

Time to Take the Test! Please login to www.mystericycle.comwww.mystericycle.com Go to My Training tab Select DOT Training Click on Click here to take the test