for all your metallographic needs since 1968 · 2019. 11. 1. · usa 4011 hyde park blvd. niagara...
TRANSCRIPT
USA 4011 Hyde Park Blvd. Niagara Falls NY 14305CDN 4065 Stanley Ave. Niagara Falls ON L2E 4Z1
www.metlabcorp.com
FOR ALL YOURMETALLOGRAPHICNEEDS SINCE 1968
METPRESS
AMOUNTING PRESS
SINCE 1968
METPRESS
AMOUNTING PRESS
17”
22 ½
”
20”
Metpress is a fully automatic mounting press suitable
for the production of numerous samples. It operates on
electro hydraulic pressure. (requires no air line) HMI LCD
display with user friendly touch screen control. Quick
interchangeable mould cylinders for desired sizes.
Parameters preloaded for quick selection.
• Fully automatic • Electro Hydraulic Pressure (no airline required) • LCD HMI display with user friendly touch screen controls• Intermediate ram included for dual mounts • Robust slide closer • Cycle completion alarm notification • Corrosion resistant steel construction
Technical Specifications
Part# 25-01Temperature up to 200º CPressure up to 350 Bars (5,000 psi)Mould Sizes 1”, 1¼”, 1½”, 2”, 25mm, 30mm, 40mm, 50mm
Heating Power 1200 wattsSize 17” x 22½” x 20”Weight 160 lbsMain 110V, 1-phase, 50/60/Hz
Accessories
25 01-M1 mould assembly with ram 1”25 01-M125 mould assembly with ram 1¼”25 01-M150 mould assembly with ram 1½”25 01-M2 mould assembly with ram 2”25 01-M25 mould assembly with ram 25mm25 01-M30 mould assembly with ram 30mm25 01-M40 mould assembly with ram 40mm25 01-M50 mould assembly with ram 50mm
Compression Mounting Properties & Comparison
PHENOLIC LUCITE EPOXY DIALLYL PHTHALATEMOULDING TEMP 350º F / 176º C 300º F / 148º C 350º F / 176ºC 300º F / 148º CMOULDING PRESS 4200 PSI / 290 BAR 3000 PSI / 206 BAR 4200 PSI / 290 BAR 3000 PSI / 206 BARCOLOURS BLACK, RED, GREEN CLEAR BLACK BLUE, GREENCYCLE TIMES EXCELLENT MODERATE GOOD GOODEDGE RETENTION FAIR GOOD EXCELLENT EXCELLENTCLARITY NONE EXCELLENT NONE HIGHHARDNESS LOW GOOD HIGH HIGH
LUCITE TRANSPARENT M125 M125-25
LUCITE THERMOPLASTIC provides and economical trasparent mount for specimens. Allow the operator to see areas of interest in the mount. Good edge retention & med hardness.
PHENOLIC THERMOSETTING These are the most popular and economical materials to use. It’s fast, has a me shrinkage, med edge retention and low hardness.
DIALLYL PHTHALATE SHORT GLASS used for a harder surface finish. Chemical resistant. excellent edge retention.
BLACK EPOXY THERMOSETTING has superior edge retention, tough grinding and excellent flow characteristics. Chemical resistant. High hardness.
DIALLYL PHTHALATE MINERAL FILLED provides moderate shrinkake and chemical resistance. Excellent retention, high hardness.
PHENOLICTHERMOSETTING
DIALLYL PHTHALATESHORT GLASS
BLACK EPOXYCOARSE/GLASS FILLEDBLACK EPOXYFINE/GLASS
DIALLYL PHTHALATEMINERAL FILLED
BLACK
BLUE
BLACK
BLUE
M126
M131
M129C M129C-25
M130
M126-25
RED
GREEN
BLACK
M127
M132
M129 M129-25
M127-25
GREEN M128 M128-25
Name Color 5 lbs 25 lbs
Consumables
PHENOLIC PREFORMS involves a combination of pressure and high temperature to mount the specimen in a form. Phenolic preforms are a convenient form for increased speed and production. Exhibits medium edge retention and hardness properties.
BLACK
RED
GREEN
500
500
500
M126LA M126LB
M127LB
M128LB
M126LC
M127LC
M128LC
Color Qty 1” 1.25” 1.50”
Phenolic Preforms
Mounting Clips
SiliconeLubricant
Specimen Caps
Met-clips (metal)
Spray orBrush Bottle
1.0” I.D.
1.25” I.D.
1.50” I.D.
2” I.D.
100/PKG
8oz16oz32oz
M167M167-16M167-32
25/PKG
25/PKG
25/PKG
25/PKG
M163
M171
M172
M173
M173-2
Type Description Qty Catalog #
Mounting Supplies
Top Slide
Top Closer
Parameter Settings
Mould Assembly
SILICON MOLDRELEASE
SPECIMEN CAPS
METALMOUNTING CLIPS