Nobody has the food and beverage industry covered quite like

Sherwin-Williams. In fact, we offer products and technologies for virtually

every area of your facility. Products that comply with stringent USDA

and FDA regulations. Products that can withstand the rigors of your

daily operation. Products you can trust to last. And with our commit-

ment to innovation, you can be sure we’ll have the products you

need for years to come.

ExpressTech™

Shorter curing time. For greater durability and faster return to service.

ExpressTech represents technologies that speed up curing time to improve the overall quality of the job. ExpressTech coatings require fewer coats, whichnot only lower your labor costs, but also get your operation back into servicefaster. And ExpressTech is ideal for a wide range of applications. To learn more about the quality advantages of ExpressTech coatings, contact your local Sherwin-Williams representative.

Waterborne Superiority The most comprehensive line of waterborne products.

Sherwin-Williams offers waterborne coatings for virtually every commercial,shop or industrial application. And thanks to our ongoing commitment toresearch and innovation, our products perform as well as — or even betterthan — solvent-based alternatives. Sherwin-Williams waterborne coatingsdeliver outstanding color and gloss, excellent durability and easy application.Plus, they offer all the benefits of a waterborne, including lower VOCs, low odor and governmental compliance.

Technologies

Food & Beverage

SHERW1094 Food&BeverageSheet 4/20/06 2:41 PM Page 1

To learn more, visit us at www.sherwin-williams.com/im or call 1-800-524-5979 to have a representative contact you.

ArmorSeal,® EnviroLastic,® Fast Clad,® Fast Glo,® Macropoxy,® Saniflex,®

and Zinc Clad® are registered trademarks of The Sherwin-Williams Company. ExpressTech,™ ExpressPatch,™ and FasTop™ are trademarks of The Sherwin-Williams Company.

©2006 The Sherwin-Williams CompanyIndustrial & Marine Coatings #2005769

ArmorSeal® ExpressPatch™ Floor RepairProtects concrete from thermal shock, impact,corrosion, chemical attack and abrasion.

The ArmorSeal ExpressPatch kit consists of a two-part water-based urethane resin and aggregate. Intended for general mainte-nance floor repair, this product can be applied to damp concretewith no standing water and will withstand service temperatures up to 225°F at 1/4” and 300°F at 3/8”. The patched area may bereturned to service in as little as four hours.

EnviroLastic® Polyurea CoatingsA tough, seamless and flexible coating or lining.

EnviroLastic Polyurea is a fast-cure, elastomeric coating or lining used in immersion or atmospheric exposure as a tough, flexible, impact and chemical-resistant lining system for primary or secondary containment. It can also be used as a waterproofmembrane or deck coating system, or as a floor and wall system.EnviroLastic Polyurea can be applied in thicknesses from 20-250mils in one application.

Fast Clad® DTM Urethane Offers a wide range of benefits for everyday maintenance challenges.

Not only does this high-build coating go on in one application with no need for an epoxy primer, it gives you a great look and corrosion protection that’s tough for tanks. Fast Clad DTMUrethane dries quickly and cures at temperatures as low as 35°F, which reduces downtime and weather delays. This product provides performance equal to that of a 2-coat epoxy/urethanesystem and is suitable for USDA-inspected facilities. With FastClad DTM Urethane, you can expect excellent color and glossretention, long-term weathering and corrosion protection.

Fast Glo® Safety Marking PaintGlows up to 4 hours. Rejuvenates in 15 seconds.

Fast Glo is a single-component, waterbased, phosphorescent,photo-luminescent coating that glows in the dark after removal of artificial light. This low-VOC coating is designed for interior usewhere safety marking is necessary to designate boundaries anddirections. Fast Glo dries quickly and is non-flammable.

FasTop™ Flooring SystemsIdeal for maintenance painting applications.

You can’t afford downtime or a flooring system that doesn’t meet USDA standards. You can’t afford a coating that won’t last.In other words, you can’t afford not to get FasTop. FasTop’s tolerance to moisture makes it the only viable flooring choice formany facilities. The FasTop line — consisting of FasTop S, FasTopM, FasTop S-U1 and FasTop Cove Base — goes down quickly to put your facility back into service faster.

Macropoxy® 646 Fast Cure EpoxyIdeal for maintenance painting applications.

Macropoxy 646 Fast Cure Epoxy is a high-solids, high-build, fastdrying, polyamide epoxy designed to protect steel and concretein industrial exposures. This high-solids epoxy ensures adequateprotection of sharp edges, corners, and welds. Macropoxy 646 isVOC compliant and can be applied directly to marginally preparedsteel surfaces.

Saniflex® Interior Wall SystemsA multi-layer, high-build wall surfacing system.

Saniflex Interior Wall System utilizes two coats of a flexible epoxymembrane as a base and one coat of a 100% solids urethaneenamel topcoat for color and gloss retention. This unique systemoffers a competitive advantage over reinforced, rigid epoxy systems while maintaining crack bridging and impact resistance.

Zinc Clad® IV Zinc Rich CoatingA two-component, polyamide epoxy, zinc-rich coating.

Zinc Clad IV has a low VOC level and contains 85% by weight of zinc dust pigment in its dried film. This product meets SSPCPaint Specification #20 for zinc-rich organic primers. It meetsClass “A” requirements for Slip Coefficient and Creep Resistance.And it provides cathodic protection. Damaged film exhibits “self-healing” properties.

Whether you need to protect your floors, walls, tanks, or the exterior of your building, Sherwin-Williams is the right choice.Not only do we offer coatings and systems for every part of your facility, we are constantly developing new technologies tohelp you reduce downtime, comply with environmental regulations, and make your business thrive.

SHERW1094 Food&BeverageSheet 4/20/06 2:41 PM Page 2