folder mca10v2 atualizado inglês - commbox...
TRANSCRIPT
-
OVERVIEW
intelligent controller
KEY FEATURES
V2
The MCA10 intelligent controller is designed to operate as the main element of an access control system. Through it it is possible to obtain performance and �exibility for a wide range of applications. The possibility of multiple combinations of reader interfaces, monitoring points and outputs allows the MCA10 to meet key security needs.
The MCA10 has RS-232/485 communication interfaces and 10/100Mbits Ethernet port. Its large memory capacity enables its use in applications of high complexity and number of users. Each user's settings (card, biometrics, code, password, time slot) are stored individually, enabling various combinations of authorized times and the choice of identi�cation technology to be used for entry and exit, distinctly.
The robust design of the equipment allows it to operate both stand-alone (o�ine) and networked (online) with other equipment, forming a complete security system.
• FLASH memory for non-volatile storage of settings, users and events, allowing o�ine operation.
• Remote �rmware upgrade (over TCP/IP)
• 1024 Time Slots (Basic + Grouped)
• 32 holidays
• 32-bit CPU
• Anti-passback
• Compatible with the main identi�cation technologies
• Feedback LEDs for all status and input/output interfaces
Each controller has its own usage settings, allowing access combinations such as card only, biometrics only, password only, and card + biometrics.
-
Readerinterfaces
5 inputs, 3 independent (input, output and urn) with control over green LED, red LED and reader beep, and 2 RS-232
Programablefunctions
- Identi�er block- Anti-passback- Door open for long time- Lock on close
Time slots - 512 basic- 512 grouped
Holidays 32
Identi�cationtime
under 1 second on local validation mode
Data backup Non-volatile FLASH memory
Realtime Clock Onboard, with internal battery
Protection Against transient surges and polarity inversion
Communication - 1 10/100MBits TCP/IP- 1 RS-485
LCD interface Standard character LCD interface, with backligth control
Keypad interface 4x4 matrix
Multi-host Up to 8 host fault tolerance
Tamper monitor 1 exclusive tamper input
Power 12VDC or PoE (802.3af or 802.3at compliant, optional), 350mA consumption (typical)
Dimensionsand wheigh
175x26x114mm (WxHxD), 260g
Environment -10 to +50°C, 5 to 80%RH, no condensation
Compatiblereaders
Biometrics (RS-232) Barcode, Proximity, Smart Card (iClass and MIFARE), Wiegand (26~86bit auto), ABA-Track / Clock & Data
Relayoutputs
3 form C wet contact relays (+12V), 1 form C dry contact relay, all with LED state indicator
Digitalinputs
4, low-level active (30VDC tolerant), with LED status indicator
Accesslogs
100,000 log bu�er (expandable). Information stored in log: Who, When, Where, Entry/Exit, Withdrawal, Allowed/Denied
Users Up to 100,000, with card, code or biometrics in veri�cation mode (1:1) and its combinations.Up to 10,000 biometrics in identi�cation mode (1:n), limited by biometric module capacity
Alarmlogs
10,000 log bu�er (expandable). Information stored in log: What, When, Status, Where
Accessmodes
Door, tunstyle (tripod, full height, swing, etc), car barrier
intelligent controller