FOCUS ONANTERIOR HIGHLIGHTS

FOCUS ON QUALITY

FOCUS ON PRECISIONFOCUS ON INNOVATION

D.O.R.C. International b.v. was established

to provide ophthalmic surgeons with

instruments and equipment designed

specifically for the demanding needs of

ophthalmic surgery. Throughout the last

25 years, D.O.R.C. has enjoyed an active

collaboration with surgeons worldwide.

This has allowed D.O.R.C. to gain an

intimate understanding of the demands

placed on ophthalmic instruments.

Coupling this knowledge with a unique

blend of design skills, engineering talent

and a simple design philosophy has resul-

ted in the development of products which

have been recognized as truly innova-

tive and of the highest quality available.

D.O.R.C. is proud to offer an extensive

line of products for ophthalmic surgery.

These products embody the ultimate in

old world craftsmanship while reflecting

the latest in state-of-the-art design.

Using only the highest quality materials,

all D.O.R.C. products are manufactured

to exacting standards and are subject to

rigorous quality control measures through-

out the manufacturing process. D.O.R.C.

International b.v. is exporting to more

than 80 countries through an exclusive

distributors network and also has its own

subsidiary in the U.S.A., France, Germany

and Scandinavia for sales & service.

DISPOSABLE OPHTHALMIC KNIVES 3• SLIT KNIVES BEVEL-UP – ANGLED 3• SLIT KNIVES BEVEL-UP – STRAIGHT, BIBEVEL – ANGLED 4• STAB KNIVES 4• CRESCENT KNIFE 4• TRAPEZOID KNIVES 4• CLEAR CORNEAL KNIVES 5• MVR BLADES 5DISPOSABLE CANNULAS 6• ANAESTHETIC CANNULAS – RETROBULBAR – SUBTENON – PERIBULBAR 6• ANTERIOR CHAMBER CANNULAS, MAINTAINER 6• CAPSULOTOMY – IRRIGATING CYSTOTOMES 7• HYDRODISSECTION CANNULAS 7• VISCOELASTIC CANNULAS 7• NUCLEUS REMOVAL CANNULAS 8• CORTEX REMOVAL CANNULA 8• IRRIGATING / ASPIRATING CANNULA 8• CAPSULE POLISHING CANNULAS 8• OCUPLASTIC PRODUCTS 9• REFRACTIVE CANNULA FOR LASIK SURGERY 9• VITREORETINAL CANNULA 9DISPOSABLE ACCESSORIES 10CAPSULORHEXIS INSTRUMENTS 12• MICRO CAPSULORHEXIS FORCEPS – TITANIUM 12• ROUND BODIED CAPSULORHEXIS FORCEPS – TITANIUM 12• FLAT BODIED CAPSULORHEXIS FORCEPS – TITANIUM 12• ERGONOMIC CAPSULORHEXIS FORCEPS 12NEEDLE HOLDERS 12• EXTRA FINE DELICATE JAW NEEDLE HOLDER – TITANIUM 12• ECKARDT COMBINED NEEDLE HOLDER / SCISSORS 12• NEEDLE HOLDERS – STAINLESS STEEL 13SPATULAS & HOOKS 13• SPATULAS & HOOKS – TITANIUM – STAINLESS STEEL 13HOSKIN FORCEPS 14• HOSKIN FORCEPS – TITANIUM 14• HOSKIN COLIBRI FORCEPS – TITANIUM 14TYING FORCEPS 15• FLAT BODIED FORCEPS – STAINLESS STEEL 15• FLAT HANDLE TYING FORCEPS – TITANIUM – STAINLESS STEEL 15• ROUND HANDLE TYING FORCEPS – STAINLESS STEEL 15ANTERIOR SCISSORS 16• IRIS SCISSORS 16• TENOTOMY SCISSORS 16• STRABISMUS SCISSORS 16• CORNEAL SCISSORS 17• WESTCOTT SCISSORS 17• FIXATION FORCEPS 17ANTERIOR MISCELLANEOUS 18• EYE SPECULUM 18CORNEA INSTRUMENTS 19• D.A.L.K. INSTRUMENTS 19• DSEK/DSAEK/DMEK INSTRUMENTS 19DIAMOND KNIVES 20• ANGLED – STRAIGHT DIAMOND KNIVES 20INTRA-OCULAR PRESSURE REDUCER 20PHACO INSTRUMENTS 21• IRRIGATION / ASPIRATION HANDPIECES 21• IRRIGATION CHOPPERS 21• PHACO NEEDLES – HOOKED, SMALL INCISION, FLARE, CHOP NEEDLE 22• PHACO ACCESSORIES 22

3

DISPOSABLECATARACTKNIVESTHE D.O.R.C. KNIVES FEATURE THE ULTIMATE SHARPNESS TO CREATE PRECISE AND SMOOTH INCISION. THE D.O.R.C. KNIVES ARE MANUFACTURED TO THE HIGHEST OF STANDARDS WITH “QUALITY YOU CAN FEEL”.

SLIT KNIVES BEVEL-UP - ANGLED

53.3722

SLIT KNIFE 2.2mm, ANGLED, BEVEL UP,(BOX/6, STERILE)

53.3727

SLIT KNIFE 2.7mm, ANGLED, BEVEL UP,(BOX/6, STERILE)

53.3728

SLIT KNIFE 2.8mm, ANGLED, BEVEL UP,(BOX/6, STERILE)

53.3730

SLIT KNIFE 3.0mm, ANGLED, BEVEL UP,(BOX/6, STERILE)

53.3732

SLIT KNIFE 3.2mm, ANGLED, BEVEL UP,(BOX/6, STERILE)

SLIT KNIVES BEVEL-UP - STRAIGHT53.3330

SLIT KNIFE 3.0mm, STRAIGHT, BEVEL UP,(BOX/6, STERILE)

53.3332

SLIT KNIFE 3.2mm, STRAIGHT, BEVEL UP,(BOX/6, STERILE)

SLIT KNIVES BIBEVEL - ANGLED51.3722

SLIT KNIFE, 2.2mm, ANGLED 45°, BIBEVEL (BOX/6, STERILE)

51.3727

SLIT KNIFE, 2.75mm, ANGLED 45°, BIBEVEL(BOX/6, STERILE)

51.3730

SLIT KNIFE, 3.0mm, ANGLED 45°, BIBEVEL(BOX/6, STERILE)

51.3732

SLIT KNIFE, 3.2mm, ANGLED 45°, BIBEVEL(BOX/6, STERILE)

4

DISPOSABLECATARACTKNIVES

TRAPEZOID KNIVES

53.1214

TRAP KNIFE 1.2mm < 1.4mm ANGLED, BEVEL UP, (BOX/6, STERILE)

53.1416

TRAP KNIFE 1.4mm < 1.6mm ANGLED, BEVEL UP, (BOX/6, STERILE)

53.1520

TRAP KNIFE 1.5mm < 2.0mm ANGLED, BEVEL UP, (BOX/6, STERILE)

STAB KNIVES

51.4891

STAB KNIFE, TIP 15°,(BOX/6, STERILE)

NON-RESTRICTED

RESTRICTED

51.4893

STAB KNIFE, TIP 30°,(BOX/6, STERILE)

51.4894

STAB KNIFE, TIP 45°,(BOX/6, STERILE)

51.7514

STAB INCISION KNIFE, DEPTH 3.0mm, TIP 15°(BOX/6, STERILE)

51.7531

STAB INCISION KNIFE, DEPTH 3.5mm, TIP 30°(BOX/6, STERILE)

CRESCENT KNIFE

51.1118

CRESCENT KNIFE, 2.25mm, 55°, BEVEL UP (BOX/6, STERILE)

5

DISPOSABLECATARACTKNIVES

CLEAR CORNEAL KNIVES

54.5725

CLEAR CORNEAL KNIFE 2.5mm, ANGLED,(BOX/6, STERILE)

54.5726

CLEAR CORNEAL KNIFE 2.65mm, ANGLED, (BOX/6, STERILE)

54.5727

CLEAR CORNEAL KNIFE 2.75mm, ANGLED, (BOX/6, STERILE)

54.5728

CLEAR CORNEAL KNIFE 2.85mm, ANGLED,(BOX/6, STERILE)

54.5730

CLEAR CORNEAL KNIFE 3.0mm, ANGLED,(BOX/6, STERILE)

54.5732

CLEAR CORNEAL KNIFE 3.2mm, ANGLED,(BOX/6, STERILE)

MVR BLADES

52.5220

MVR BLADE 20G, ANGLED, (BOX/6, STERILE)

51.5230

MVR BLADE 20G, STRAIGHT(BOX/6, STERILE)

1282.D06

MVR BLADE 23G, ANGLED 45°(BOX/6, STERILE)

6

DISPOSABLECANNULAS

ANAESTHETIC CANNULAS – SUBTENONSUBTENON CANNULA FOR INJECTING ANAESTHETIC INTO THE SUBTENON SPACE.

ANAESTHETIC CANNULAS – PERIBULBARPERIBULBAR CANNULA FOR INJECTING ANAESTHETIC AROUND THE GLOBE.

52-5176

ANAESTHETIC SUB TENON CANNULA CURVED WITH FLATTENED TIP (19G x 1” / 1.1 x 25mm) (BOX/10, STERILE)

52-5108

ANAESTHETIC CANNULA PERIBULBAR - ATKINSON (25G x 1 1/4” / 0.5 x 32mm)(BOX/10, STERILE)

52-5001

ANAESTHETIC CANNULA PERIBULBAR - ATKINSON (23G x 1 1/4” / 0.64 x 32mm)(BOX/10, STERILE)

ANTERIOR CHAMBER CANNULAS

52-1273

ANTERIOR CHAMBER CANNULA - RYCROFT (30G x 7/8” / 0.3 x 22mm)(BOX/10, STERILE)

52-1280

ANTERIOR CHAMBER CANNULA - RYCROFT (27G x 7/8” / 0.4 x 22mm)(BOX/10, STERILE)

52-1639

ANTERIOR CHAMBER CANNULA - RYCROFT (25G x 7/8” / 0.5 x 22mm)(BOX/10, STERILE)

52-1281

ANTERIOR CHAMBER CANNULA - RYCROFT (21G x 7/8” / 0.81 x 22mm)(BOX/10, STERILE)

FOR MAINTAINING AND FORMING THE ANTERIOR CHAMBER DURING SURGERY BY INJECTING OR REMOVING VISCOELASTIC MATERIALS, BSS OR AIR.

ANTERIOR CHAMBER MAINTAINER 52-5061

SELF-RETAINING ANTERIOR CHAMBER MAINTAINER (LEWICKY) (20G x 9/64” / 0.9 x 3.5mm) (BOX/5, STERILE)

ANAESTHETIC CANNULAS – RETROBULBAR

52-1637

ANAESTHETIC CANNULA RETROBULBAR - ATKINSON (25G x 1 1/2” / 0.5 x 38mm)(BOX/10, STERILE)

52-1275

ANAESTHETIC CANNULA RETROBULBAR (25G x 1 1/2” / 0.5 x 38mm) TRIFACET (BOX/10, STERILE)

52-1638

ANAESTHETIC CANNULA RETROBULBAR - ATKINSON (23G x 1 1/2” / 0.64 x 38mm)(BOX/10, STERILE)

RETROBULBAR CANNULA FOR INJECTING ANAESTHETIC INTO THE MUSCLE CONE.

7

DISPOSABLECANNULAS

CAPSULOTOMY – IRRIGATING CYSTOTOMES

52-5042

FORMED IRRIGATING CAPSULORHEXIS CYSTOTOME (AXIAL CUTTING EDGE) (27G x 5/8” / 0.4 x 16mm) (BOX/10, STERILE)

52-1610

FORMED IRRIGATING CYSTOTOME (90°)(25G x 5/8” / 0.5 x 16mm)(BOX/10, STERILE)

52-1618

FORMED IRRIGATING CYSTOTOME (90°)(27G x 5/8” / 0.4 x 16mm)(BOX/10, STERILE)

52-5008

FORMED IRRIGATING CYSTOTOME (SHORT CURVE, 8.5mm FROM TIP) (27G x 5/8” / 0.4 x 16mm) (BOX/10, STERILE)

52-1630

FORMED IRRIGATING CYSTOTOME (45°)(30G x 5/8” / 0.3 x 16mm)(BOX/10, STERILE)

FOR CAPSULORHEXIS, INTERCAPSULAR / ENDOCAPSULAR AND CAN OPENER CAPSULOTOMY TECHNIQUES.

VISCOELASTIC CANNULAS

52-5009

VISCOELASTIC CANNULA ANGLED AT 45° (23G x 7/8” / 0.64 x 22mm)(BOX/10, STERILE)

52-2639

VISCOELASTIC CANNULA ANGLED AT 45° (25G x 7/8” / 0.64 x 22mm)(BOX/10, STERILE)

HYDRODISSECTION CANNULAS

52-5099

SAUTER NUCLEUS HYDRODISSECTOR (27G x 7/8” / 0.4 x 22mm)(BOX/10, STERILE)

52-5155

HELSINKI NUCLEUS HYDRODISSECTOR (27G x 7/8” / 0.4 x 22mm)(BOX/10, STERILE)

52-5037

NUCLEUS HYDRODISSECTOR (ANGLED) (25G x 7/8” / 0.5 x 22mm)(BOX/10, STERILE)

52-5107

TAPERED HYDRODELINEATOR (25G x 7/8” / 0.5 x 22mm tapered to 0.30mm at the tip) (BOX/10, STERILE)

52-5090

VISCOEXPRESSION (CORYDON) ROUNDED TIP ANGLED 1,8mm FROM END (25G x 7/8” / 0.5 x 22mm)(BOX/10, STERILE)

TO DELIVER FLUIDS TO FACILITATE THE SEPARATION OF THE CORTEX FROM THE NUCLEUS AND CAPSULE.

FOR THE SAFE INTRODUCTION OF VISCOELASTIC.

8

CORTEX REMOVAL CANNULA IRRIGATING / ASPIRATING CANNULA

52-5075

CORTEX EXTRACTOR 0.3mm SIDE PORT (23G x 7/8” / 0.64 x 16mm)(BOX/10, STERILE)

52-5047

I/A SIMCOE CANNULA, SHORT PATTERN 0.3mm PORT 200mm SILICONE TUBING (23G / 0.64 x 0.64mm) (BOX/5, STERILE)

FOR ASPIRATING CORTICAL DEBRIS WHEN CHAMBER IS MAINTAINED WITH AN ANTERIOR CHAMBER MAINTAINER OR VISCOELASTIC SUBSTANCE.

FOR REMOVING CORTICAL DEBRIS OR VISCOELASTIC SUBSTANCES WHILE MAINTAINING THE ANTERIOR CHAMBER.

CAPSULE POLISHING CANNULAS

52-1614

CAPSULE POLISHER ANGLED, MICRO ETCHED 5mm FROM END (21G x 7/8” / 0.81 x 22mm)(BOX/10, STERILE)

52-1604

CAPSULE POLISHER KRATZ ANGLED 9mm FROM MICRO ETCHED TIP. ASPIRATION THROUGH 0,30mm SIDE PORT (21G x 7/8” / 0.81 x 22mm) (BOX/10, STERILE)

52-5147

OLIVE TIPPED CANNULA (CURVED) (23G x 1” / 0.64 x 25mm)(BOX/10, STERILE)

52-5143

OLIVE TIPPED POLISHER (CURVED) MICRO ETCHED OLIVE TIP (23G x 1” / 0.64 x 25mm)(BOX/10, STERILE)

FOR POLISHING AND CLEANING THE RESIDUAL CORTEX FROM THE CAPSULAR BAG.

DISPOSABLECANNULAS

NUCLEUS REMOVAL CANNULAS

52-1595

MICRO IRRIGATING VECTIS 4mm WIDE, SINGLE PORT (27G x 1 1/2” / 0.4 x 38mm)(BOX/10, STERILE)

52-1619

IRRIGATING VECTIS 5mm WIDE, SINGLE PORT (25G x 1 1/2” / 0.5 x 38mm)(BOX/10, STERILE)

52-5032

SMALL INCISION IRRIGATING VECTIS 3mm x 2.75mm WIDE, SINGLE PORT (27G x 1 1/2” / 0.4 x 38mm) (BOX/10, STERILE)

FOR IRRIGATING AND REMOVING THE NUCLEUS AND THE LARGER PIECES OF CORTICAL DEBRIS WHILE MAINTAINING THE ANTERIOR CHAMBER DEPTH.

9

OCUPLASTIC PRODUCTS

52-1276

LACHRYMAL CANNULA CURVED (26G x 1 1/4” / 0.45 x 32mm)(BOX/10, STERILE)

52-5010

LACHRYMAL INTUBATION SET (23G x 7” / 0.6 x 175mm)(BOX/3, STERILE)

FOR PROBING AND IRRIGATING THE LACHRYMAL DUCTS.

DISPOSABLECANNULAS

REFRACTIVE CANNULA FOR LASIK SURGERY

52-5250

LASIK IRRIGATING CANNULA (LINDSTROM) (25G x 7/8” / 0.5 x 22mm)(BOX/10, STERILE)

52-5205

ASPIRATION CANNULA (20G x 1 1/4” / 0.9 x 32mm)(BOX/10, STERILE)

VITREORETINAL CANNULA

YELLOW - 30 GAUGE/ 0.3mm GREY - 27 GAUGE/ 0.4mm BROWN - 26 GAUGE/ 0.45mm ORANGE - 25 GAUGE/ 0.5mm

BLUE - 23 GAUGE/ 0.6mm GREEN - 21 GAUGE/ 0.8mm YELLOW - 20 GAUGE/ 0.9mm

ALL HUB COLOURS COMPLY WITH ISO-6009

HUB COLOURS

REF: 52-1275

123456 YYYY-MM

D.O.R.C. International b.v.Zuidland – The Netherlands Tel: +31 181 458080

LOT

PATIENT RECORD LABEL

10

•UNIVERSALPROCEDUREPACK,COST-EFFECTIVE•HIGHQUALITYCOMPOSITION •ONLYONEPACKFOR90%OFPHACOANDVITRECTOMY PROCEDURES,CONSISTINGOF: TABLE DRAPE, PATIENT DRAPE, 2 XL GOWNS WITH 2 TOWELS, 2 X 60ml GALLIPOTS, 2 X 5ml SYRINGES, 1 X 3ml SYRINGE,

1X EYESHIELD, 1X EYEPAD, 10X GAUZES, 1X DISTEMPER CLAMP, 1X TRANSPARENT MAYOCOVER, 1X TRAY•CUSTOMIZATION: A PIGGY-BACK CAN BE SUPPLIED WITH ALL SPECIFIC STERILE ITEMS: CANNULAS, KNIVES, DRAIN, TUBING SETS, RETINAL PRODUCTS, ETC.

4020

IRIS RETRACTORS (SET/5, STERILE)

1284-AD

OSHIO ANTERIOR WIDE FIELD LENS(BOX/5, STERILE)

1420-D

DISPOSABLE CONTACT KERATOSCOPE(BOX/6, STERILE)

VBL-10S

0.5 ML SYRINGE (BOX/10, STERILE)

50-1040

UNIVERSAL EYE SHIELD (BOX/50, STERILE)

VBL-10S-USA

0.5 ML, SYRINGE (BOX/10, STERILE)Vision Vision

50-1041

UNIVERSAL EYE SHIELD (BOX/100, NON-STERILE)

DISPOSABLEACCESSORIES

55.5000

UNIVERSAL PROCEDURE PACK

ANTERIORREUSABLE

12

ERGONOMIC CAPSULORHEXIS FORCEPS

CURVED FORCEPS “UTRATA” WITH VERY DELICATE GRASPING TIPS AND EXTREMELY THIN 11mm LONG VAULTED SHANKS

50.6081A

CAPSULORHEXISINSTRUMENTS

ROUND BODIED CAPSULORHEXIS FORCEPS – TITANIUM

50.251: CURVED FORCEPS ”UTRATA”, ULTRA FINE GRASPING TIPS, 11mm LONG THIN SHANKS50.253: CURVED FORCEPS “CORYDON”, FINE GRASPING TIPS, 11mm LONG THIN SHANKS

50.251/50.253

MICRO CAPSULORHEXIS FORCEPS – TITANIUM

MICRO CAPSULORHEXIS FORCEPS, INTRAOCULAR STYLE, 21G SHAFT, 4mm LONG SHANKS

50.265

FLAT BODIED CAPSULORHEXIS FORCEPS – TITANIUM

STRAIGHT FORCEPS “UTRATA”, ULTRA FINE GRASPING TIPS, 11mm LONG THIN SHANKS

50.050

ECKARDT COMBINED NEEDLE HOLDER / SCISSORS50.535 50.535

ECKARDT COMBINED NEEDLEHOLDER / SCISSORS

EXTRA FINE DELICATE JAW NEEDLE HOLDER – TITANIUM

NEEDLEHOLDER, STRAIGHT, 8mm JAW, WITHOUT LOCK

50.526

NEEDLEHOLDERS

13

50.1980

PISACANO HOOK

SPATULAS&HOOKSSPATULAS & HOOKS – TITANIUM

SPATULAS & HOOKS – STAINLESS STEEL

50.1971A

“SINSKEY” HOOK, ANGLED, EXTRA FINE

50.1932

IOL MANIPULATOR “LESTER”, ANGLED 0.25mm TIP

50.1927

PHACO CHOPPER, OFFSET 30º, LEFT

PHACO CHOPPER, OFFSET 30º, LEFT

50.715

NEEDLE HOLDERS – STAINLESS STEEL

MICRO NEEDLE-HOLDER “BARRAQUER-TROUTMAN”, CURVED, 0.6 x 9mm., WITHOUT LOCK, 9cm

50.4405

MICRO NEEDLEHOLDER “BARRAQUER, CURVED, 1,0 x 10mm, ITHOUT LOCK, 13cm

50.4575

MICRO NEEDLEHOLDER “BARRAQUER, CURVED, 0.5 x 9mm, WITHOUT LOCK 12,5cm

50.4579B

NEEDLEHOLDERS

SPATULA BLUNT, 1.7mm WIDE

50.1977

14

OTHER STYLES AVAILABLE ON REQUEST.

IRIS SPATULA FOR VITREOUS & SYNECHIA, 10mm

50.1998B

JAFFE SPATULA, 0.5mm

50.1972

SPATULAS&HOOKSSPATULAS & HOOKS – STAINLESS STEEL

HOSKINFORCEPSHOSKIN FORCEPS – TITANIUM

HOSKIN FORCEPS

50.919

HOSKIN FORCEPS NO.19, NOTCHED, 0.3mm TIPS, 0.2mm HOLE

HOSKIN COLIBRI FORCEPS – TITANIUM

HOSKIN COLIBRI FORCEPS

50.922

HOSKIN COLIBRI FORCEPS NO. 22, NOTCHED, 0.3mm TIPS, 0.2mm SMALL HOLE

OTHER STYLES AVAILABLE ON REQUEST.

LENS NUCLEUS ROTATOR “JAFFE-BECHERT”, ANGLED

50.1961

15

OTHER STYLES AVAILABLE ON REQUEST.

TYINGFORCEPSFLAT BODIED FORCEPS – STAINLESS STEEL

BONN FORCEPS - 2 TEETH 0.12mm WITH PLATFORMS - 7cm

50.3132

MICRO-TYING FORCEPS “TROUTMAN”, STRAIGHT, VERY DELICATE, WITH 5mm PLATFORM, 9.5cm

50.3349A

TROUTMAN TYING FORCEPS, CURVED

50.3349B

SUTURE FORCEPS “PAUFIQUE” 1x2 TEETH, 0.3mm, 45° PLATFORM, 7.5cm

50.3362A

MAC PHERSON TYING FORCEPS, ANGLED

50.3347

ROUND HANDLE TYING FORCEPS – STAINLESS STEEL

50.3136

BONN FORCEPS - ERGO-NOMIC-2 TEETH 0.12mm WITH PLATFORMS

50.3329B

CURVED TROUTMAN FORCEPS

STRAIGHT FORCEPS

FLAT HANDLE TYING FORCEPS – TITANIUM

50.011

TOOTHED FORCEPS “BONN”, 1 x 2 TEETH, 0.12mm

50.013

NOTCHED FORCEPS, 6mm PLATFORM, 0.3mm TIPS

STRAIGHT FORCEPS

16

TYINGFORCEPSFLAT HANDLE FORCEPS – STAINLESS STEEL

COLIBRI FORCEPS, MICRO CORNEAL FORCEPS “TROUTMAN”, 0.12mm 45° WITH TYING PLATFORM

50.3339A

STRABISMUS SCISSORS

STRABISMUS SCISSORS, STRAIGHT, 10cm

50.4055

TENOTOMY SCISSORS50.4100TENOTOMY SCISSORS “STEVENS”, STRAIGHT, SHORT MODEL, BLUNT, 10.5cm 50.4110TENOTOMY SCISSORS “STEVENS”, CURVED, SHORT MODEL, BLUNT, 10.5cm

IRIS SCISSORS

IRIS SCISSORS “NOYES”

50.4210.1

VANNAS SCISSORS, CURVED, LONG BLADES

50.4247A

ANTERIORSCISSORS

OTHER STYLES AVAILABLE ON REQUEST.

17

OTHER STYLES AVAILABLE ON REQUEST.

WESTCOTT SCISSORS

FIXATION FORCEPS

ELSCHNIG FIXATION FORCEPS

50.3245

ANTERIORSCISSORSCORNEAL SCISSORS

KATZIN SCISSORS, RIGHT

50.4285

KATZIN SCISSORS, LEFT

50.4286

WESTCOTT TENOTOMY SCISSORS, BLUNT, 11cm

50.4270

18

ANTERIORMISCELLANEOUS

OTHER STYLES AVAILABLE ON REQUEST.

EYE SPECULUM

EYE SPECULUM “LIEBERMANN”, K-WIRE

50.1052

EYE SPECULUM “KRATZ-BARRAQUER”, LARGE, HEAVY WIRE

50.1049

EYE SPECULUM “BARRAQUER”, ADULT SIZE

50.1058A

STANDARD SPECULUM, MEDIUM SIZE

50.1096

HAEMOSTATIC FORCEPS “HARTMANN”, CURVED 10cm

50.2701

HAEMOSTATIC FORCEPS “HARTMANN”, STRAIGHT 10cm

50.2700

CASTROVIEJO CALIPER, 15mm

50.2630

SNELLEN LOOP

50.2020

SERREFINE

50.2755

CHALAZION FORCEPS “DESMARRES”, 26mm, 9cm

50.3920.2

50.2150.0CHALAZION CURETTE “MEYHOEFER”, SHARP, 2.0mm 50.2150.1CHALAZION CURETTE “MEYHOEFER”, SHARP, 2.5mm

50.2150.2 CHALAZION CURETTE “MEYHOEFER”, SHARP, 3.0mm

50.2150.3 CHALAZION CURETTE “MEYHOEFER”, SHARP, 3.5mm

SPATULA “JAEGER”

50.1140

19

CORNEAINSTRUMENTS

DSEK/DSAEK/DMEK INSTRUMENTS

50.2115

CURVED P.L.K. SCISSORS, TYPE 1

50.2116

CURVED P.L.K. SCISSORS, TYPE 2

50.2117

CURVED P.L.K. SCISSORS, TYPE 3

2114A

DONOR CORNEA HOLDER

50.1971B

REVERSED SINSKY HOOK

50.2118

MELLES P.L.K. SCRAPER, STYLE 1, 45° SEMI-SHARP ROUNDED TIP

50.2119

MELLES P.L.K. SCRAPER, STYLE 2, 90° SEMI-SHARP ROUNDED TIP

50.212D

MELLES P.L.K. SCRAPER SET (BOX/2, STERILE)

CURVED P.L.K. SCISSORS

D.A.L.K. INSTRUMENTSIN COLLABORATION WITH DR. GERRIT R. J. MELLES, D.O.R.C. DEVELOPED AN INNOVATIVE RANGE OF INSTRUMENTS FOR D.A.L.K., P.L.K. AND DMEK KERATOPLASTY SURGERY.

D.A.L.K. SPATULA DISSECTION SET

2110

D.A.L.K. / P.L.K. DONOR EYE HOLDER

2114

ALIOCANTE ALTERNATIVE SUTURE-ENTRY MARKER

2111

20

ANGLED DIAMOND KNIVES

STRAIGHT DIAMOND KNIVES

2205.A

SLIT KNIFE, 90° ANGULATED, DOUBLE BEVEL, BLUNT SIDED, 3.2mm WIDE

2205.F

15° SINGLE CUTTING EDGE, FOR STEP INCISION, 0.95mm WIDE

2205.B

SLIT KNIFE, 90° ANGULATED, DOUBLE BEVEL, SHARP SIDED, 3.2mm WIDE

2205.G

45° SINGLE CUTTING EDGE, FOR STEP INCISION, 1.0mm WIDE

2205.E

CRESCENT KNIFE, 90° ANGULATED, DOUBLE BEVEL, SHARP SIDED, 2.0mm WIDE

2205.C

SLIT KNIFE, 90° ANGULATED, DOUBLE BEVEL, SHARP SIDED, 3.0mm WIDE

2205.D

SLIT KNIFE, 90° ANGULATED, DOUBLE BEVEL, SHARP SIDED, 2.8mm WIDE

DIAMONDKNIVES

INTRA-OCULARPRESSUREREDUCER2000

21

PHACOINSTRUMENTSIRRIGATION / ASPIRATION HANDPIECES

UNIVERSAL I/A HANDPIECE, EXCL. TIPS

1273.EH

1273.EA

CURVED TIP

1273.EPA

CURVED TIP WITH SILICONE SLEEVE

1273.ES

STRAIGHT TIP

IRRIGATION CHOPPERS

IRRIGATION CHOPPER WITH TWO IRRIGATION SIDE PORTS, BLUNT TIP AND CUTTING EDGE

1270.D

ASPIRATION HANDPIECE WITH ROUGHENED TIP AND 0,35mm ASPIRATION PORT

1270.F

IRRIGATION CHOPPER WITH IRRIGATION FRONT, BLUNT TIP AND CUTTING EDGE

1270.E1270.C

IRRIGATION CHOPPER WITH TWO IRRIGATION SIDE PORTS, BLUNT TIP

BIMANUAL IRRIGATION/ASPIRATION SET

1270.B

PHACO NEEDLES - HOOKED

(BOX/3)

3005.H09 Ø 0.9mm NEEDLEPHACO NEEDLE HOOKED WITH 0° TIP,Ø 0.9mm INCL. IRRIGATION SLEEVEAND NEEDLE WRENCH (SET/3)

3005.H08 Ø 0.8mm NEEDLEPHACO NEEDLE HOOKED WITH 0° TIP,Ø 0.8mm INCL. IRRIGATION SLEEVE AND NEEDLE WRENCH (SET/3)

22

PHACO ACCESSORIES3003BLUE INFUSION SLEEVE FOR 3006-PF NEEDLES

3003.SWHITE INFUSION SLEEVE FOR 3005-FDS NEEDLES

3003.MTRANSPARENT INFUSION SLEEVE FOR 3005-FDM NEEDLES

3004.WDPHACO NEEDLE WRENCH FOR 3005-FDS NEEDLES(STERILE, BOX/6)

3007PHACO TEST CHAMBER

PHACO CHOP NEEDLE3006.CHOP Ø 1.2mm NEEDLE SLEEVELESS PHACO NEEDLE CONICAL SHAPED SUITABLE FOR BIMANUAL “COOL” PHACO CHOP 2.0 - 2.2mm MICRO INCISION Ø 1.2mm SHAFT INNER DIAMETER OF 0.5mm ZERO ANGLE (SET/3)

(BOX/3)

PHACO NEEDLES - FLARE3006.PF530 Ø 1.2mm NEEDLEPHACO NEEDLE WITH BLUE SLEEVE 3003 SUITABLE FOR HIGH FLOW DIVIDE AND CONQUER 2.75 - 3.2mm INCISION, Ø 0.9mm SHAFT, INNER DIAMETER OF 0.5mm, WITH 30° TIP (SET/3)

3006.PF545SAME AS 3006-PF530, WITH 45° TIP (SET/3)

3006.PF630 Ø 1.2mm NEEDLEPHACO NEEDLE WITH BLUE SLEEVE 3003 SUITABLE FOR DIVIDE AND CONQUER 2.75 - 3.2mm INCISION, Ø 0.9mm SHAFT, INNER DIAMETER OF 0.6mm, WITH 30° TIP (SET/3)

3006.PF645SAME AS 3006-PF630, WITH 45° TIP (SET/3)(BOX/3)

30073003 3003-S3003-M 3004-WD

PHACOINSTRUMENTSPHACO NEEDLES - SMALL INCISION

3005.FDS Ø 0.9mm NEEDLE PHACO NEEDLE WITH WHITE SLEEVE 3003-S, SUITABLE FOR DIVIDE AND CONQUER & PHACO CHOP 2.75 - 2.8mm SMALL INCISION. AVAILABLE IN 15°, 30° AND 45° TIP (SET/3)

(BOX/3)

3005.FDM Ø 0.8mm NEEDLEPHACO NEEDLE WITH TRANSPARENT SLEEVE 3003-M, SUITABLE FOR DIVIDE AND CONQUER & PHACO CHOP 2.0 - 2.2mm MICRO INCISION. AVAILABLE IN 30° AND 45° TIP (SET/3)

FOCUS ON KNOWLEDGE

FOCUS ON DESIGN

For additional information please contact:

In US / Canada please contact:

In Latin America please contact:

In Scandinavia please contact:

In France please contact:

In Germany please contact:

In Middle East please contact:

D.O.R.C. International B.V.Scheijdelveweg 23214 VN Zuidland, The NetherlandsPhone: +31 181 45 80 80Fax: +31 181 45 80 90E-mail: sales@dorc.eu

Dutch Ophthalmic USA10 Continental DriveBldg 1, Exeter, NH 03833, U.S.A.Phone: +1 800-75-DUTCH or +1 603-778-6929Fax: +1 603-778-0911E-mail: sales@dutchophthalmicusa.com

D.O.R.C. Latin AmericaScheijdelveweg 23214 VN Zuidland, The NetherlandsPhone: +31 181 45 80 80Fax: +31 181 45 80 90E-mail: la-sales@dorc.eu

D.O.R.C. Scandinavia ABBettorpsgatan 10SE-703 69 Örebro, SwedenPhone: +46 19121514Fax: +46 19188204E-mail: order@dorc.eu

D.O.R.C. France S.A.R.L.30, Boulevard Pasteur75015 Paris, FrancePhone: +33 1 53 58 14 73Fax: +33 1 53 58 14 75E-mail: ventes@dorc.eu

D.O.R.C. Deutschland GmbHSchiessstr. 55DE-40549 Düsseldorf, DeutschlandPhone: +49 (0) 211 5229 1580Fax: +49 (0) 211 5229 1585E-mail: bestellung@dorc.eu

D.O.R.C. Middle East, Africa and IndiaPO BOX 212218, DubaiUnited Arab EmiratesPhone: 00971 509116587Fax: 00971 48857614E-mail: cvds@dorc.eu

AUTHORIZED D.O.R.C. DEALER

0344

Ver

sion 2

013.1

© 2

013 D

.O.R

.C. In

tern

atio

nal

b.v

. ©

2013 D

utc

h O

phth

alm

ic U

SA Inc.

Spec

ific

atio

ns

are

subje

ct t

o c

han

ge

wit

hout

noti

ce.