Instruction ManualIn order to ensure safe snowboarding, follow the instructions below and check for the correct settings.

This instruction manual contains important information regarding correct usage of the boots,terms of warranty, and safety.

FLUX SNOWBOARD BOOTS

CARMATE MFG. CO., LTD

http://www.flux-bindings.com/wheretobuy/international/

http://www.flux-bindings.comFor US : info@flux-bindings.com

If your purcahse was made outside of the U.S., please contact your local distributor.

Read the following to ensure safety

Damage to boots has been caused by riding on boxes and rails as well as injuries to users. Please be sure to inspect your equipment prior to usage to ensure that it is safe to use before riding.Snowboarding can be dangerous, please use caution at all times.

To enjoy snowboarding safely

Ensure to follow the instructions below.

This symbol alerts the user of the risk of injury or damage to the product or personal belongings if the caution is unheeded.

In this manual, particularly important matters and information that you should know are denoted by symbols. The symbols and their meanings are as follows:

This symbol warns the user the danger of being involved in a serious accident resulting in serious injury or death if the warning is unheeded.

Cautions on equipment and installation

This product is a pair of soft boots exclusively for snowboarding. They are not suitable for working in, or walking for long hours on snow.Verify that the boots match your bindings, and secure them together securely.Before use, verify that the boot fits your foot. It may be necessary to break in new a pair until you feel comfortable in them.

*For new boots to be comfortable to use, we recommend you to break them in until you feel comfortable.

Other cautions

Cautions while riding

Before riding, ensure that the Boa System is securely fastened. Insufficient fastening maylead to injury.Use this product only for traditional soft bindings. Use in other types of binding systems may cause and result in serious injury

Snowboarding is a sport that involves substantial personal risk, with high possibilities of injury and property damage.All child snowboarder must ride under adult supervision.*If you are a beginner, we encourage you to learn at a certified snowboard school.When riding, select an appropriate slope according to your skill level. Always follow safety instructions and regulations from the ski resort.When you fall down, give way to other snowboarders coming from behind. Before you resume riding always check around you for safety.

While you are on the ski lift, ensure that the snowboard edges do not damage your boots and wire laces.The warranty will not cover damages or wear and tear caused by snowboard edges and/or bindings.

After riding, wipe your boots dry. Store them in a dry place away from heating appliance. Avoid direct sunlight, high ambient temperature and humidity. Remove the liners from your boots for faster drying. After drying, fasten the BOA wire laces lightly to keep the boots in shape.Always use the BOA wire laces of designated lengths indicated on the inside of the boot tongue. Failing to use laces with designated lengths may lead to insufficient fastening and damages.Please refer to the link on how to handle and care of our leather products.

Do not use soluble chemicals such as adhesive agents, or oils on your boots. They may cause deformation and/or damage to the product.This product is not 100% waterproof in structure.Although we pay close attention to the materials we use in this product, their colors may stain your snowboard clothing and bindings.

FITTING THE BOOTS

Boa Boots

Side Mount

Boa Dial

Boa Wire Lace

OMNI-BOA

Liner Boots

Shin Strap

Lace Stoper

Liner Lace

Liner lace Handle

TYPE 2GTO-BOA

Tongue Mount

Boa Dial

Tongue Mount

Boa Dial

Boa Wire Lace

Boa Guide Boa Release

Guide

・Pull out the side mount Boa Dial.・Pull out the tongue mount Boa Dial.・Bring the tongue portion all the way down to the toe portion and push the tongue mount Boa Dial back in. 　*Pushing the Boa Dial back in locks the wire lace in place and prevents it from retracting.・Undo the shin strap on the liner boot.・Pull the lace stopper on the liner boot lace toward you to loosen the liner boot lace.・Place your foot in the liner boot, ensuring your heel fits securely in place.・Pull up on the liner boot lace handle. Slide the lace stopper downwards to lock the liner boot lace in place.・After checking for a secure fit across your entire foot, fasten the shin strap on the liner boot.・When you are ready to tighten the Boa wire lace, push the side mount Boa Dial back in and turn it clockwise.・Pull out the tongue mount Boa Dial. *A portion of the wire lace will retract automatically.・When you are ready to tighten the Boa wire lace, push the tongue mount Boa Dial back in and turn it clockwise.

CAUTION:・To prevent any damage or injury from occurring, ensure that both Boa systems (tongue mount Boa and side mountBoa) 　are tightened firmly.

OMNI BOA, GTX BOADouble Boa Boots

・Pull out the tongue mount Boa Dial.・Detach the Boa release guides on both sides and release them from the Boa guide.・Bring the tongue portion all the way down to the toe portion and push the tongue mount Boa Dial back in.　*Pushing the Boa Dial back in locks the wire lace in place, preventing it from retracting.・Undo the shin strap on the liner boot.・Pull up on the lace stopper in the liner boot to loosen the liner boot lace.

・Place your foot in the liner boot, ensuring your heel fits securely in place.・Pull up on the liner boot lace. Push the lace stopper back in to lock the liner boot lace.・After checking for a secure fit across your entire foot, fasten the shin strap on the liner boot.・Attach the Boa release guides back onto the Boa guide.・Ensure there are no kinks in the wire lace.・Pull out the tongue mount Boa Dial. *A portion of the wire lace will retract automatically.・When you are ready to tighten the Boa wire lace, push the tongue mount Boa Dial back in and turn it clockwise.

CAUTION: ・To prevent any damage or injury from occurring, do not walk or snowboard without the Boa release guides securely attached.・To prevent any damage or injury from occurring, ensure that the Boa system (tongue mount Boa) is tightened firmly.

GTO BOASingle Boa Boots

・Undo the shin strap on the liner boot.・Pull up on the lace stopper on the liner boot lace to loosen the liner boot.・Place your foot in the liner boot, ensuring your heel fits securely in place.・After checking for a secure fit across your entire foot, fasten the shin strap on the liner boot.・Pull up on the liner boot lace. Push the lace stopper back in to lock the liner boot lace.・Tie the shoe laces so that any excess is secured and out of the way.

CAUTION:・To prevent any damage or injury from occurring, ensure that the shoe laces are properly tightened.

MXS-LACE, GTX-LACELace Boots

・Undo the shin strap on the liner boot.・Pull up on the lace stopper on the liner boot lace to loosen the liner boot.・Place your foot in the liner boot, ensuring your heel fits securely in place.・After checking for a secure fit across your entire foot, fasten the shin strap on the liner boot.・Pull up on the liner boot lace. Push the lace stopper back in to lock the liner boot lace.・Tie the shoe laces so that any excess is secured and out of the way.

CAUTION:・To prevent any damage or injury from occurring, ensure that the laces are properly tightened.

GTO-SPEEDSpeed Lace

Lace Boots Speed Lace Boots

MXS-LACE GTO-SPEED

Lace hook

Boot Lace

Speed Lace

Cleat Lock

Handle Pocket

Handle

Lace Guide

CAUTION:・Excessive turning of the Boa Dial may lead to breakage.

REFERENCE:・For a more efficient tightening of the OMNI-BOA, GTX-BOA, tighten the side mount Boa Dial first.

CAUTION:・Although the wire lace is made to have long-term durability, it must be replaced if it becomes worn or twisted.・For a replacement lace pack, please contact us or the shop where you bought the product.・Please ensure the laces in your replacement lace pack are the correct lace length for your boot.・Visit our website for the appropriate wire lace lengths.

REFERENCE:・Wire lace that is too short will cause the boot to not open completely, making it difficult to take on and off.・Wire lace that is too long may cause insufficient tightening of the boot. It can also cause the wire lace to become 　caught inside the reel, leading to performance failure.・When changing the wire lace, replace the damaged wire lace using the lace configuration on the other boot 　as a reference.

REFERENCE:・This system integrates the Boa Powerzone guides, which give you the option to loosen or tighten specific areas 　of the boot. The Boa guides allow you to hook the lace tab onto the guide, resulting in a stronger tightening 　of the laces across the instep of the boot (the toe area). The guides also allow you to loosen the wire lace 　by detaching the Boa release guides from the guides on the side, speeding up the process of putting on　 and taking off your boots.

GTO-BOA・Detach the Boa release guide. Pull out the lace tab on the instep and hook the wire lace onto the outer guide.　Put the Boa release guides back in place, ensuring there are no kinks in the wire lace and that the guide is in the 　correct position.*Be careful not to let the lace tab become stuck under the Boa wire lace.

How to use the Boa Lacing System:

How to change the Boa Wire Lace:

How to use the Boa POWERZONE System:

BOA Dial

・Pull out the knob dial from the housing. ・Push the knob dial back into the housing. ・Turn the knob dial clockwise to tighten.

Boa Release GuideBoa Release Guide

Lace tabLace tab

Housing

Knob Dial

H3 Coiler (HP42 Wire Lace)

#2

・Push on the portion indicated by the red arrows. 　Twist the housing clockwise.

・Pull the knob dial out to detach from the housing.

・Pull the wire out from the spool.

・Insert the lace into hole #1 (indicated in red) and feed it through.

・Insert the lace into the housing before attaching the Boa Dial and spool.

#1

Red mark

・Turn the lace around and insert into hole #2 (indicated in red).

・Pull on the wire lace.

・There will be slack on the left side.　 Pull the wire tightly until all of the slack is stored in the spool.

slack

・Attach the Boa Dial and spool according to the steps in procedure A.

・Insert the lace into hole #3.*Store the lace end completely inside hole #3.

#3

*Push the lace loop in completely

・Push the lace end all the way into the pocket.

#2

#3

#1

*Note the wire configuration within the spool.

Push the lace end all the way into the pocket.

Housing

Knob Dial

Coiler Tube

Housing

Knob Dial/Spool

Spool

A) How to detach the Boa Knob Dial, Housing and Spool:

B) How to change (and lace) the Boa Wire:

C) How to attach the Boa Knob Dial, Housing and Spool:

M3v2 (HP42 Wire Lace)

Housing

Housing

Housing

A) How to detach the Boa Knob Dial, 　 Housing and Spool:

B) How to change (and lace) the Boa Wire:

C) How to attach the Boa Knob Dial, Housing and Spool:

Knob Dial

Knob Dial

Housing Spool

Spool

Spool

Spool

・Set the Boa tool on the screw.

・Insert the wire lace into hole #1.　 Pull the Lace in the direction indicated by the arrows. ・Insert the wire lace into hole #2. ・Insert the wire lace into hole #3.

・Pull firmly on the wire lace. ・Pull the wire firmly to tighten.

・Turn counterclockwise to unscrew.

・Detach the Boa Dial and spool from housing.

・Remove the wire from the spool.

#1

#2

#3

#1#2 #3

・Attach the Boa Dial to the housing.　*Screw firmly to tighten.

・Put the spool back into the housing.

REFERENCE:・In this system, a wire stopper is attached to one end of the HP42 Terminator wire lace. The wire stoppers enable　 a stronger tightening over the instep of the boot, beginning from the front portion of the boot (the toe area).

HP42 Terminator Wire Lace (OMNI-BOA and GTX-BOA)

Boa provides replaceable parts at no charge for the life of the product in whichwe are integrated. In order to support the continuing improvement of Boaproducts and the products of the Brands we work with we need the followinginformation in order to provide your parts at no charge. This will also be used asshipping information to get you the parts you need.

For Warranty Claims in Europe, Africa and the Middle East, Please contact our European office in Austria.

The Boa System dials and laces are guaranteed for the lifetime of the product onwhich they are integrated.

https://www.theboasystem.com/support

Boa Technology Inc.3459 Ringsby Court, Suite 300Denver, CO 80216OFFICE +1 303 455 5126FAX +1 303 455 0575info@BoaTechnology.com

AMERICAS - HQ

Boa Technology GmbHPrielhofstrasse 10A-5310 Mondsee, AustriaOFFICE +43 6232 93080info_EMEA@BoaTechnology.com

EMEA (EUROPE, MIDDLE EAST, AFRICA, INDIA)

Boa Technology Co., LTD.5th Floor Building 8, Dong Fang MingIndustrial Park, Dabao Rd, District 33,Baoan, Shenzhen, ChinaOFFICE +86 0755 27856299info_CHINA@BoaTechnology.com

CHINABoa Technology Japan Inc.Tokiwa Bld. 8F1-14-11 Fujimi, Chuo-KuChiba, Japan 260-0015OFFICE +81 43 304 6526FAX +81 43 304 6527info_JAPAN@BoaTechnology.com

JAPAN

Boa Technology Korea Inc.5F Dorim Bldg.,40 Dosin-Ro 15-GIL,Yeongdeungpo-Gu,Seoul, 07374, KoreaOFFICE +82 70 4086 9840info_KOREA@BoaTechnology.com

KOREA

　A) How to change the Terminator Wire Lace:・Remove the wire lace from the Boa boot reel. ・Pull out the HP42 Terminator wire lace from the Terminator guide on the inside of the outer boot instep.・When attaching the wire lace, put the Terminator guide back in the opposite order. ・Make sure the guide is in the correct position.

HP42 Terminator wire lace

HP42 Terminator wire lace

Wire stoppers Wire stoppers

Terminator guide

How to change the Speed Lace:

※Tightly tied

※Tightly tied

　・Upper Lace

Upper LaceHandle

　・Lower Lace

Lower LaceHandle

1.

2.

3.

1.

2.

3.

・When changing the speed laces, replace the damaged speed lace using the lace configuration of the other boot as a reference.

10ｍｍ～

10ｍｍ～

1.

2.

3.

　・Handle

※Tightly tied

10ｍｍ～

REFERENCE:・Applying wax and water-repelling agents before use will help in reducing both the buildup of dirt and the deterioration　of the product’s water repellency.・Note that when a wet leather product dries, it may develop a bloom (a white-to-yellow colored deposit) on its surface. 　This bloom may form as the oils in the leather come to the surface and dry. This will not cause any problems 　in using the product.・Note that although we pay close attention to the color of our products, discoloration may occur due to environmental 　factors and perspiration during use.

CAUTION:・When you purchase any third-party wax and/or water-repelling agents for maintaining this product, 　ensure to check their instruction guides.・For boots made of full-grain leather or synthetic fibers, ensure to use a wax or a water-repelling agent suitable 　for that material.・Some wax products and water-repelling agents may cause the color of the product to fade or change. 　Please test them on an inconspicuous portion of the product before use.・Make sure any wax products you use do not soften the leather.・Do not spray any water-repelling agents onto the sole or other rubber parts of the product, as this may lead to deterioration and peeling of these parts of the product.

Thank you for purchasing our FLUX snowboard boots. To ensure the safe use of your boots for many years, please make sure to read this instruction manual.

In this product, genuine leather is used on the surface portions indicated by the red arrows in the image below.Note that while the genuine leather portions have been finished to repel water, the boots themselves are not completely waterproof.Follow the reference and caution steps below to keep the leather in good condition.

Maintaining leather products:

MXS-LACE

● GTO-Speed

23.0cm

23.5cm

24.0cm

24.5cm

25.0cm

25.5cm

26.0cm

26.5cm

27.0cm

27.5cm

28.0cm

28.5cm

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

110cm (43")

110cm (43")

110cm (43")

110cm (43")

110cm (43")

110cm (43")

120cm (47")

120cm (47")

120cm (47")

120cm (47")

120cm (47")

120cm (47")

Speed LaceSize

Upper Lower

US_5

US_5.5

US_6

US_6.5

US_7

US_7.5

US_8

US_8.5

US_9

US_9.5

US_10

US_10.5

● ＭＸＳ－Lace

23.0cm

23.5cm

24.0cm

24.5cm

25.0cm

25.5cm

26.0cm

26.5cm

27.0cm

27.5cm

28.0cm

28.5cm

29.0cm

29.5cm

236cm (93")

236cm (93")

236cm (93")

236cm (93")

236cm (93")

236cm (93")

280cm (110")

280cm (110")

280cm (110")

280cm (110")

280cm (110")

280cm (110")

280cm (110")

280cm (110")

Boot LaceSize

US_5

US_5.5

US_6

US_6.5

US_7

US_7.5

US_8

US_8.5

US_9

US_9.5

US_10

US_10.5

US_11

US_11.5

● GTO-Boa

23.0cm

23.5cm

24.0cm

24.5cm

25.0cm

25.5cm

26.0cm

26.5cm

27.0cm

27.5cm

28.0cm

28.5cm

US_5

US_5.5

US_6

US_6.5

US_7

US_7.5

US_8

US_8.5

US_9

US_9.5

US_10

US_10.5

150cm (59")

150cm (59")

150cm (59")

150cm (59")

150cm (59")

150cm (59")

160cm (63")

160cm (63")

160cm (63")

160cm (63")

160cm (63")

160cm (63")

Boa Wire LaceSize

● GTX-Lace

23.0cm

23.5cm

24.0cm

24.5cm

25.0cm

25.5cm

26.0cm

26.5cm

27.0cm

27.5cm

28.0cm

28.5cm

29.0cm

29.5cm

30.0cm

30.5cm

236cm (93")

236cm (93")

236cm (93")

236cm (93")

236cm (93")

236cm (93")

280cm (110")

280cm (110")

280cm (110")

280cm (110")

280cm (110")

280cm (110")

280cm (110")

280cm (110")

280cm (110")

280cm (110")

Boot LaceSize

US_5

US_5.5

US_6

US_6.5

US_7

US_7.5

US_8

US_8.5

US_9

US_9.5

US_10

US_10.5

US_11

US_11.5

US_12

US_12.5

● GTX-Boa

23.0cm

23.5cm

24.0cm

24.5cm

25.0cm

25.5cm

26.0cm

26.5cm

27.0cm

27.5cm

28.0cm

28.5cm

29.0cm

29.5cm

30.0cm

30.5cm

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

110cm (43")

110cm (43")

110cm (43")

110cm (43")

110cm (43")

110cm (43")

120cm (47")

120cm (47")

120cm (47")

120cm (47")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

110cm (43")

110cm (43")

110cm (43")

110cm (43")

110cm (43")

110cm (43")

110cm (43")

110cm (43")

Boa Wire LaceSize

Upper Lower

US_5

US_5.5

US_6

US_6.5

US_7

US_7.5

US_8

US_8.5

US_9

US_9.5

US_10

US_10.5

US_11

US_11.5

US_12

US_12.5

Length of Boa Wire Lace/Speed Lace/Boot Lace

● OMNI-Boa

23.0cm

23.5cm

24.0cm

24.5cm

25.0cm

25.5cm

26.0cm

26.5cm

27.0cm

27.5cm

28.0cm

28.5cm

29.0cm

29.5cm

Boa Wire LaceSize

Upper Lower

US_5

US_5.5

US_6

US_6.5

US_7

US_7.5

US_8

US_8.5

US_9

US_9.5

US_10

US_10.5

US_11

US11.5

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

110cm (43")

110cm (43")

110cm (43")

110cm (43")

110cm (43")

110cm (43")

120cm (47")

120cm (47")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

100cm (39")

110cm (43")

110cm (43")

110cm (43")

110cm (43")

110cm (43")

110cm (43")