flowdaq ultrasonic flowmeter system · ®ultrasonic flowmeter system europe strain measurement...
TRANSCRIPT
® Ultrasonic Flowmeter System
EuropeStrain Measurement DevicesBury Road, Chedburgh, Bury St Edmunds IP29 [email protected] | +44 (0)1284 852 000
USAStrain Measurement Devices
55 Barnes Park North, Wallingford, CT [email protected] | (203) 294-5800
www.smdsensors.com
Applications:
· Medical Devices· Laboratory Tests· Bioprocessing· Industrial Flow Measurements
This electronic module is used with either In-Line or Clamp-On �ow sensors, measuring �ow in tubes, pipes, and blood vessels. The system calculates the proportional �ow rates via the transit time di�erence between upstream and downstream ultrasonic signals. Temperature and pressure measurements are optional, and the system can provide information on �ow rate, accumulated �ow volume, sound speed in liquid/gas, and signal strength. The FlowDAQ® module is equipped with a 4.3” touch screen for display, controlling information on �ow and system settings, and allowing zero calibration. The system can be connected to a computer through the UART serial port using a USB-Serial converted cable, and be con�gured using the system software. Instantaneous �ow rate, �ow history, and ultrasonic wave form can all be displayed on the computer screen
graphically. Flow information can also be exported and saved as data �les for further analysis.
ISO9001Registered
ISO13485Registered
Product Speci�cationsMaterials:
Display & Control:
Input Voltage & Current:
Flowmeter Analog & UART Output:
Connector Speci�cations:
PC /ABS (CHIMEI PC-345)
Touch Screen
Voltage: 6 - 30 VDCCurrent: 230 mA at 18 VDC
UARTBaud Rate: 115200Data Bits: 8Stop Bits: 1Parity: None
AnalogOutput 1: +/-5V Flow Rate
Output 2: 0 - 2V Ultrasonic signal strength (must be between 0.4-2V to guarantee accurate measurements)
Connector 1: TransducerConnecter 2: BNC, +/-5V Analog Output, Flow RateConnecter 3: BNC, 0 - 2V Analog Output, Signal StrengthConnecter 4: UART Digital OutputConnecter 5: 6 to 30 VDC, Power Unit
ISO9001Registered
ISO13485Registered
www.smdsensors.com
2.78”[70.73 mm]
4.38”[111.25 mm]
8.85” [224.86 mm]
8.07” [204.97 mm]
4X Ø 0.18” [4.57 mm]
Connector 1: Transducer
1.90”[48.28 mm]
0.25”[6.35 mm] Connector 2: Flow Rate
Connector 3: Signal StrengthConnector 4: Digital Output
Connector 5: Power Input