floors with precision - barit · features the barit floor drain is made of rust-free v2a steel....

FLOORS WITH PRECISION

Pho

to: B

AR

iT

BARiT FlooRdRAins | Details

As part of BARiT’s services, professional installation can also be included alongside supplying the floor drains. For a coupled and seamless integration, these are incor-porated into resin concrete. Extensive variations in the type of floor drains offer a wide range of solutions.V2A floor drains can be easily cleaned with our BARiT CLEANER.

FeATuRes

The BARiT FLOOR DRAIN is made of rust-free V2A steel. Additional stability is provi-ded for with its solid frame for the ground connection, rounded edges, and one- piece drain body. Depending on the customer‘s wishes, solid covers with and without anti-slip surfaces, grid and bar grates are available. Lockable covers that emit little odor or are liquid-tight can be used in pharmaceutical and cleanroom areas.Suction levers allow for the opening and closing of floor drains. Removable bell-shaped siphons and dirt collecting bas-kets, which are placed above the water level, provide for additional hygienic pro-tection.

deFiniTion And PuRPose

BARiT FLOOR DRAIN is made of stainless V2A steel.Solid frames, chamfered edges, drain bo-dies of one piece only and sleeve collars afford the very best stability. For covering, there are solid plates with and without skid protection, gridiron grating and bar grates.

Quick info stainless of V2A steel drain body of one piece only solid covers covers to meet requirements of

pharmaceuticals and clean rooms easy cleaning thermal loads admissible mechanically stable

Anti-slip panel sterile cover with siphon

grate

smooth panel

BARiT Kunstharz-Belagstechnik GmbHPostfach 100947, 73709 Esslingen, DE

fon: 0049 711 939291-0 fax: 0049 711 939291-9

[email protected]

BARiT FlooRdRAins | Details

TYPE Floordrains, one part

Material Stainless steelAISI 3041.4301

Material thickness 2 mmdeep drawed 1,5 mm

Surface chemically descaled

Construction round bodied

no channel connection

Cleaning BARiT Cleaner*

Firesafety on demand

PRÄZISION AM BODEN

BARiT Kunstharz-BELAGSTECHNIK GmbHPostfach 10 09 47, D-73709 Esslingen

fon 07 11 - 93 92 91-0fax 07 11 - 93 92 91-9e-mail [email protected]

BARiT KH-Coating

Resin concrete

Cuff collar

Cement Flooringwith adhesive bridge, TYPE: CT-C35-F5

according to DIN 18560

Concrete slab

Finished class C25 / 25according to DIN 1045

Permanently elastic joint

Polyethylene Sheet

Form Casing

* according to cleaning and care instructions

TYPE Ba 150 Ba 200 Ba 250

Outlet DN 70 mm DN 100 mm DN 100 mm

Flow Ltr../sec. 1,6-2,2 2,7-3,1 3,5

Inside Diameter Ø185 Ø235 Ø285

Outside Diameter of Frame Ø205 Ø255 Ø305

Outside Diameter of Drainbody Ø153 Ø203 Ø253

Length of Outlet Pipe 70 70 80

Height without Outlet Pipe 200 240 260

Height of Frame 30 30 30

Water Level of Trap 60 60 60all measurements in mm

Seamless integration of round floor drain


Pho

to: B

AR

iT

BARiT sloT ChAnnel | Details

For a coupled and seamless integration, these are incorporated into resin concrete. Extensive standard versions offer a wide range of solutions. Additional sloped channels with different sizes can be spe-cial ordered on request. V2A floor drains can be easily cleaned with our BARiT CLEANER.

FeATuRes

BARiT SLOTTED CHANNEL is made of rust-free V2A steel. Additional stability for high loads is provided for with professio-nal bends, welded spacer ribbing and lengthwise reinforcement brackets.As part of BARiT’s services, professional in-stallation can also be included along with supplying the SLOTTED CHANNELs.


Slotted channels are for the drainage of those rooms where small quantities of water only to be removed. Gradients being integrated assure a high flow rate and the very best self-purification. BARiT slotted channels made of V2A steel with proper edges, welded distance plates and reinforcing angles with oblong holes al-low heavy mechanical loads.

Quick info ustom tailored gradients integrated stainless of V2A steel solid covers easy cleaning mechanical stability resisting to thermal loads

Fully visible slotted channel

slotted channel with dirt trap

sparkassenversicherung, stuttgart


fon: 0049 711 939291-0 fax: 0049 711 939291-9

[email protected]

BARiT sloT ChAnnel | Details

TYPE sloT channEl


Material thickness 2/3 mm


Execution ca. 0,5 m

Slot Width 20 mm

Slot Width (barefoot area) 8 mm (min. height 78 mm)

Built-in-Fall 0,6 %



Filled with KH Mortar

BARiT KH-Coating

Stabilizing angle joint

Resin concrete



Concrete slabFinished class C 25



TYPEstandardsrc 50/2

special slot chan-nel src 75/2

special slot chan-nel src 75/3

Overall Width 136 151 153

Channel Width 50 75 75

Max. Height 296 292 204

Min. Height 60 78 78

Max. Lenght 39 36 21

all measurements in mm

Bars provide mechanical stability


Pho

to: B

AR

iT

BARiT TRouGh ConVeYoR | Details

As part of BARiT’s services, professional instal-lation can also be included along with supp-lying the BOXED GUTTERs. For a coupled and seamless integration, these are incorporated into resin concrete. Extensive standard versi-ons offer a wide range of solutions. Additional types of sloping, thicknesses and profiles, and lateral or central floor drains can be special or-dered on request. V2A boxed gutters can be easily cleaned with our BARiT CLEANER.

FeATuRes

BARiT BOXED GUTTER is made of rust-free V2A steel. Boxed gutters are custom-made with integrated longitudinal sloping or longitudinal and transversal sloping.Additional stability is provided throughout with inward facing grill supports, lengthwise reinforcement brackets and welded spacer ribbing. Not only the pro-fessional bending of the material, but also the appropriate cover ensure a high load capacity. Depending on the customer‘s wishes, solid covers with and without anti-slip surfaces and bar grates are available. The material thickness of 2 mm ensures a high thermal and mechanical resistance.


The BARiT TROUGH CONVEYOR made of stainless V2A steel gets custom-tailored with longitudinal and crosswise slopes in-tegrated. High stability is assured by conti-nuously edged grate plates, reinforcing angles with oblong holes and welded di-stance plates.

Quick info custom-tailored integrated sloping stainless of V2A steel solid covers easy cleaning mechanical stability resisting to thermal loads

Anti-slip panel grate grate

smooth panel


fon: 0049 711 939291-0 fax: 0049 711 939291-9

[email protected]

BARiT TRouGh ConVeYoR | Details

TYPE KasTEnrinnE


Material thickness 2 mm

Space between distances ca. 1 m


Built-in Fall 1 %



Cuff collar


BARiT KH-Coating



Resin concrete

Grout in A1

Concrete slabFinished class C 25



TYPE Kr 118 Kr 172 Kr 222 Kr 272 Kr 322 Kr 400

Overall Width 118 172 222 272 322 400

Channel Width 50 100 150 200 250 328

Cover Thickness 20 25 20-40 20-40 20-40 25-50

Cover Width 74 130 180 230 280 358

Max. Height 150 310 341 391 441 519

Min. Height 40 55 55 55 55 55

Drain Type 150-300 150-300 150-300 150-300 150-300 150-300

all measurements in mm

Bars provide mechanical stability and impact protection


fon: 0049 711 939291-0 fax: 0049 711 939291-9

[email protected]

BARiT BoXed GuTTeR WiTh deViCe BAse | Details

Cuff collar


BARiT KH-Coating



Type: Kitchen Floorin R12 V4

Resin concrete

Concrete slab Finished class C25 / 25according to DIN 1045

Device base made of porous concrete (Ytong)

V2A-Joint

Smooth KITCHEN TERRAZZO, R9, about 6 mm

Fabric reinforcement, approx. 1mm

Channel for KITCHEN TERRAZZO, R9

Device Base with Boxed Gutter

Quick info custom-tailored integrated sloping stainless of V2A steel easy cleaning mechanical stability resisting to thermal loads


fon: 0049 711 939291-0 fax: 0049 711 939291-9

[email protected]

BARiT ChAnnels in Commercial Kitchens | Details

Coating / tile / plaster

BARiT ZE COMPENSATION SURFACEwith adhesive bridge, Type: CT-C35-F5


Structural concreteaccording to DIN 1045,

Finished class: C 25

Final profile in V2A steel

Wall, an example made of concrete, masonry

BARiT-KH-Channel

BARiT-KITCHEN FLOOR

Schlüter-Winkel

with integrated waterproofing surface

R 9 R 12/V4

Quick info jointless smooth flutes leak-proof easy cleaning hand-moulded


SCREEDS according to DIN 18560Type: CT-C35-F7

Thermal insulationaccording to heat protection ordinance



Permanently elastic joint


U-shaped Profile in V2A steel

BARiT-KH-Channel

BARiT-KITCHEN FLOOR

Schlüter-Winkel

with integrated waterproofing surface

R 9 R 12/V4

Bituminous sheeting

Polyethylene Sheet

Channels in the composite are worked into a smooth surface on the tiles.

Channels for the composite are modeled into a smooth surface on the pillars. Channel in the composite

Channel on „floating floor”




according DIN 18560



Final profile


BARiT-KH-Channel

BARiT-ATEX-TERRAZZO/PHARMA-TERRAZZO

BARiT ChAnnel in Pharma/Cleanroom/hospital | Details

Prefabrication of a channel for a surgical doorframe

Smooth Channel in Sterile Area

Channel in the composite



Pharma-/Cleanroom-OP-Wall


according DIN 18560



Final profile

Flooring profile wall

BARiT-KH-Channel

BARiT-ATEX-TERRAZZO/PHARMA-TERRAZZO

BARiT ChAnnel in Pharma/Cleanroom/hospital | Details

Channels are implemented by hand on the walls of a pharmaceutical cleanroom or operating room.

Channel with Wall Connection

Channel in the composite





according DIN 18560



Final profile


BARiT KH vertical base

BARiT-TERRAZZO



according DIN 18560



Final profile


BARiT-KH-Triangular base/plinth

BARiT-TERRAZZO/-INO

BARiT TRiAnGulAR BAse And VeRTiCAl BAse | Details

Vertical base on „floating floor“

Triangular base/plinth is accurately modeled by hand


SCREEDS, Typ: CT-C35-F7according to DIN 18560



Final profile


Strip edging

BARiT KH vertical base

BARiT-TERRAZZO

Polyethylene Sheet

Thermal insulationaccording to heat protection ordinancePolyethylene Sheet


Perpendicular base is accurately modeled by hand

Vertically in the base composite

Triangular base/plinth in composite

Vertical base with strip edging


BARiT-KITCHEN FLOORwith integrated waterproofing surface

BARiT-Triangular base

V2A Joint

Pipe ductV2A steel



Structural concrete according to DIN 1045,Finished class: mind. C 25

elastic joint

Firesafty through customer

R 12 R 12R 9 R 9

Quick info jointless leakage-proof easy cleaning accurate and precise approach

BARiT-KH-Coating

Pipe duct V2A steel



Structural concrete according to DIN 1045,Finished class: mind. C 25

EP-Resin

elastic joint

Firesafty through customer

BARiT MediA PAssAGes | Details

Interrupting element with triangular base/plinth

Precise and accurate application for interrupting elements

installation of equipment bases, as in a production kitchen

installation for interrupting elements


fon: 0049 711 939291-0 fax: 0049 711 939291-9

[email protected]

BARiT BAudehnunGsFuGen | Details

BARiT-KH-COATING, e. g. TYPE: PHARMA-TERRAZZO

BARiT-SCREEDSTYPE: CT-C35-F5 according to DIN 18560

elastic joint

Epoxy-Cement-Concrete

TK 100 tape

Round, soft rubber profile


Finished class: mind. B 25

Quick info seamless solid mechanically stable

Flooring change from BARiT KH Flooring to Parquet

Expansion joints are installed in resin concrete.installation of expansion joints

Schlüter-Winkel

cork strips

parquetBARiT-KH-Coating

Cement Flooringwith adhesive bridge, TYP: CT-C35-F5


installation of flooring change


fon: 0049 711 939291-0 fax: 0049 711 939291-9

[email protected]

BARiT BAse FoRMATion | Details

Kita Scharnhauser Park, Scharnhausen Kita Scharnhauser Park, Scharnhausen

Grout

Trennband

V2A joint, 40 x 40 mm

KH-bonding course

BARiT-KH-Coating, e. g. Elastic B65

Grout

Rundprofil

Screeds

without composite

Quick info coated stainless steel angle joint colormat-

ched to BARiT flooring and wall covering

floors with precision - barit · features the barit floor drain is made of rust-free v2a steel....

Documents