flir a310pt 6° ntscwesams.com/wp-content/uploads/2016/04/flir-a310pt-6... · 2018-05-11 ·...
TRANSCRIPT
FLIR A310pt 6° NTSC
General description
The FLIR A310pt Pan & Tilt is an affordable solution for anyone who needs to solve problems thatrequire built in “smartness” such as analysis and alarm functionality. The FLIR A310pt Pan & Tilt has allthe necessary features and functions to build distributed single- or multi-camera solutions to coverlarge areas to monitor such as in coal pile monitoring and sub-station monitoring using standardEthernet hardware and software protocols.
The FLIR A310pt precision pan/tilt mechanism gives operators accurate pointing control whileproviding fully programmable scan patterns, radar slew-to-cue, and slew-to-alarm functionality.
Multi-sensor configurations also include a day/night 36× zoom color CCD camera on the same pan/tiltpackage.
Key features:
• Built-in extensive analysis functionality.• Extensive alarm functionality, as a function of analysis and more.• H.264, MPEG-4, and MJPEG streaming.• Built-in web server.• 100 Mbps Ethernet (100 m cable, wireless, fiber, etc.).• Composite video output.• Precise pan/tilt mechanism.• Daylight camera.• IP66 rated.• IP control: FLIR PTseries cameras can be integrated into any existing TCP/IP network and
controlled using a personal computer.• Serial control interface, use Pelco D or Bosch commands over RS-232, RS-422, or RS-485 to
remotely control the FLIR A310 pt.• Multi-camera software: FLIR Sensors Manager allows users to manage and control a FLIR PT
series camera in a TCP/IP network.
Imaging and optical data
IR resolution 320 × 240 pixels
Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK
Field of view (FOV) 6° × 4.5°
Minimum focus distance 4 m (13.11 ft.)
Focal length 76 mm (3.0 in.)
Spatial resolution (IFOV) 0.33 mrad
Lens identification Automatic
F-number 1.3
Image frequency 30 Hz
Focus Automatic or manual (built in motor)
Zoom 1–8× continuous, digital, interpolating zooming onimages
P/N: 61002-1101Copyright© 2015, FLIR Systems, Inc.All rights reserved worldwide. Names and marksappearing herein are either registered trademarksor trademarks of FLIR Systems and/or itssubsidiaries. All other trademarks, trade names orcompany names referenced herein are used foridentification only and are the property of theirrespective owners.Document identityPubl. No.: 61002-1101Release:Commit: 24652Language: en-USModified: 2015-04-10Formatted: 2015-04-10Corporate HeadquartersFLIR Systems, Inc.27700 SW Parkway Ave.Wilsonville, OR 97070USATelephone: +1-503-498-3547Websitehttp://www.flir.comCustomer supporthttp://support.flir.comDisclaimerSpecifications subject to change without furthernotice. Camera models and accessories subjectto regional market considerations. Licenseprocedures may apply. Products described hereinmay be subject to US Export Regulations. Pleaserefer to [email protected] with anyquestions.
1 (14) www.flir.com
FLIR A310pt 6° NTSC
P/N: 61002-1101© 2015, FLIR Systems, Inc.#61002-1101; r. /24652; en-US
Detector data
Detector type Focal plane array (FPA), uncooledmicrobolometer
Spectral range 7.5–13 µm
Detector pitch 25 µm
Detector time constant Typical 12 ms
Measurement
Object temperature range • –20 to +120°C (–4 to +248°F)• 0 to +350°C (+32 to +662°F)
Accuracy ±4°C (±7.2°F) or ±4% of reading
Measurement analysis
Spotmeter 10
Area 10 boxes with max./min./average/position
Isotherm 1 with above/below/interval
Atmospheric transmission correction Automatic, based on inputs for distance,atmospheric temperature and relative humidity
Optics transmission correction Automatic, based on signals from internalsensors
Emissivity correction Variable from 0.01 to 1.0
Reflected apparent temperature correction Automatic, based on input of reflectedtemperature
External optics/windows correction Automatic, based on input of optics/windowtransmission and temperature
Measurement corrections Global and individual object parameters
Alarm
Alarm functions 6 automatic alarms on any selected measurementfunction, camera temperature
Set-up
Color palettes Color palettes (BW, BW inv, Iron, Rain)
Set-up commands Date/time, Temperature (°C/°F)
Imaging and optical data (visual camera)
Field of view (FOV) 57.8° (H) to 1.7° (H)
Focal length 3.4 mm (wide) to 122.4 mm (tele)
F-number 1.6 to 4.5
Focus Automatic or manual (built in motor)
Optical Zoom 36× continuous
Electronic Zoom 12× continuous, digital, interpolating
Detector data (visual camera)
Focal plane array (FPA) 1/4” Exview HAD CCD
Effective pixels 380.000
Technical specification (pan & tilt)
Azimuth Range Az velocity 360° continuous, 0.1 to 60°/sec max
Elevation Range El velocity ± 45°, 0.1 to 30°/sec. max
2 (14) www.flir.com
FLIR A310pt 6° NTSC
P/N: 61002-1101© 2015, FLIR Systems, Inc.#61002-1101; r. /24652; en-US
Technical specification (pan & tilt)
Programmable presets 128
Automatic heaters Clears window from ice. Switched on at +4°C (39°F). Switched off at +15°C (59°F).
Ethernet
Ethernet Control, result and image
Ethernet, type 100 Mbps
Ethernet, standard IEEE 802.3
Ethernet, connector type RJ-45
Ethernet, communication
Ethernet, video streaming Two independent channels for each camera
- MPEG-4, H.264, or M-JPEG
Ethernet, protocols Ethernet/IP, Modbus TCP, TCP, UDP, SNTP, RTSP,RTP, HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS),DHCP, MDNS (Bonjour), uPnP
Composite video
Video out Composite video output, NTSC compatible
Video, standard CVBS (SMPTE 170M NTSC)
Power system
Power 24 VAC (21-30 VAC; 24 VAC: 215 VA max. withheater) or 24 VDC (21-30 VDC; 24 VDC: 195 Wmax. with heater).
Environmental data
Operating temperature range –25°C to +50°C (-13°F to +122°F)
Storage temperature range –40°C to +70°C (–40°F to +158°F)
Humidity (operating and storage) IEC 60068-2-30/24 h 95% relative humidity +25°C to +40°C (+77°F to +104°F)
EMC • EN 61000-6-2 (Immunity)• EN 61000-6-3 (Emission)• FCC 47 CFR Part 15 Class B (Emission)
Encapsulation IP 66 (IEC 60529)
Bump 5 g, 11 ms (IEC 60068-2-27)
Vibration 2 g (IEC 60068-2-6)
Physical data
Weight 18.1 kg (40.0 lb.)
Size (L × W × H) 460 × 467 × 326 mm (18.1 × 18.4 × 12.8 in.)
Base mounting
Housing material Aluminum
Shipping information
Packaging, type Cardboard box
List of contents • Pan & tilt with infrared camera including lensand visual camera
• FLIR Sensors Manager download card• Lens cap• Printed documentation• Small accessories kit• User documentation CD-ROM
3 (14) www.flir.com
FLIR A310pt 6° NTSC
P/N: 61002-1101© 2015, FLIR Systems, Inc.#61002-1101; r. /24652; en-US
Shipping information
Packaging, weight
Packaging, size 671 × 564 × 464 mm (26.4 × 22.2 × 18.3 in.)
EAN-13 7332558007242
UPC-12 845188007614
Country of origin Sweden
Supplies & accessories:
• T197000; High temp. option +1200°C/+2192°F for FLIR T/B2xx to T/B4xx and A3xx,A3xxf, A3xxpt, A3xxsc series
• 4119468; ADAPTER PLATE - PT-SERIES• 223-0017-00; JOYSTICK ASSY, NEXUS CONSOLE• 500-0461-00; PEDESTAL MOUNT ASSY- PT-SERIES• 500-0509-00; POLE ADAPTER - PT-SERIES• 4124857; POWER SUPPLY ASSY, 24VAC - PT-series• 500-0460-00; WALL MOUNT ASSY- PT-SERIES• 324-0010-00; Hard case - PT-SERIES• 4130235; FLIR Sensors Manager, pro
4 (14) www.flir.com
460
100
252
514
467
326
252
327
81
100
660
A
162
138
4x
9
186
162
DE
TAIL
A
SC
ALE
2 :
5
Där
ej a
nnat
ang
es/U
nles
s ot
herw
ise
stat
ed
Kant
er b
rutn
aEd
ges
brok
en
Hål
käls
radi
er
Ra
µm
Fille
t rad
ii
Ytjä
mnh
et/R
ough
ness
Blad
/She
et
Rev
Ritn
nr/D
raw
ing
No
ArtN
o.
Skal
a/Sc
ale
Size
Dat
um/D
ate
Kont
r/Che
ckKo
nstr/
Dra
wn
Mat
eria
l
Ytbe
hand
ling/
Surfa
ce tr
eatm
ent
Gen
tol
Benä
mni
ng/D
enom
inat
ion
Denna handling får ej delges annan, kopieras i sin helhet eller delar utan vårt medgivande .Överträdelse härav beivras med stöd av gällande lag.FLIR SYSTEMS AB
This document must not be communicated or copied completely or in part, without our permission.Any infringement will lead to legal proceedings.FLIR SYSTEMS AB
A3U
tdra
g ur
/Exc
erpt
from
ISO
276
8-m
±0,1
±0,2
±0,3
±0,5
±0,8
(400
)-100
0(1
20)-4
00(3
0)-1
20(6
)-30
0,5-
6ISO
276
8-m
K1(
1)
-
1:5
-
-
H. Ö
STLI
NG
BT1
2740
0
DIM
ENSI
ON
AL D
RAW
ING
PT
ULG
U20
11-1
0-31
2011
-11-
28-
H. Ö
STLI
NG
Ändr
ad a
v/M
odifi
ed b
yÄn
drad
/Mod
ified
12
34
56
78
910
A B C D E F G H
13
25
4
C FB D GEA
70m
m2,
76in
70mm2,76in
33,3mm1,31in
35m
m1,
38in
33,3mm (2x)1,31in2,
9mm
0,11
in
32,7
mm
(3x)
1,29
in
182m
m7,
16in
172m
m6,
76in
12mm (3x)0,47in
24mm (3x)0,94in
35mm1,38in
M4
(6x)
UN
C 1
/4-2
0 (3
x)
Cam
era
with
bui
lt-in
IR le
ns f=
18 m
m (2
5°)
12
34
56
78
910
16
32
54
A B C D E F G H
FC E GDA B
-
-
Scal
e 1:1
ASi
ze
Mod
ified
R&D
The
rmog
raph
y20
12-0
4-18
CAH
A
Basi
c di
men
sion
s FL
IR A
3xx/
SC3x
x
T125
002
1(8)
A3D
enom
inat
ion
Dra
wn
byC
heck
Size Dra
win
g N
o.
Shee
t
7
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to [email protected] with any questions. Diversion contrary to US law is prohibited.
172m
m6,
76in
264,
4mm
10,4
1in
85,4
mm
3,36
in
68mm2,68in
33,3mm (2x)1,31in
Lens
sup
port
Opt
iona
l
82,5
mm
3,25
in
33,3mm1,31in
70mm2,76in
41,3
mm
1,62
in
118,
1mm
4,65
in
41,3mm1,62in
12mm (3x)0,47in
24mm (3x)0,94in
M4
(6x)
UN
C 1
/4"-
20 (3
x)
3,
55in
90,1
mm
For a
dditi
onal
dim
ensi
ons
see
page
1
Cam
era
with
Len
s IR
f=4
mm
(90°
) inc
l sup
port
12
34
56
78
910
16
32
54
A B C D E F G H
FC E GDA B
-
-
Scal
e 1:1
ASi
ze
Mod
ified
R&D
The
rmog
raph
y20
12-0
4-18
CAH
A
Basi
c di
men
sion
s FL
IR A
3xx/
SC3x
x
T125
002
2(8)
A3D
enom
inat
ion
Dra
wn
byC
heck
Size Dra
win
g N
o.
Shee
t
7
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to [email protected] with any questions. Diversion contrary to US law is prohibited.
70mm2,76in
33,3mm1,31in
70m
m2,
76in
35m
m1,
38in
213m
m8,
37in
34m
m1,
33in
47mm1,85in
33,3mm (2x)1,31in
171m
m6,
75in
35mm1,38in
12mm (3x)0,47in
24mm (3x)0,94in
66,4
mm
2,62
inM
4 (6
x) UN
C 1
/4"-
20 (3
x)
1,
51in
38,4
mm
For a
dditi
onal
dim
ensi
ons
see
page
1
Cam
era
with
Len
s IR
f=10
mm
(45°
)1
23
45
67
89
10
16
32
54
A B C D E F G H
FC E GDA B
-
-
Scal
e 1:1
ASi
ze
Mod
ified
R&D
The
rmog
raph
y20
12-0
4-18
CAH
A
Basi
c di
men
sion
s FL
IR A
3xx/
SC3x
x
T125
002
3(8)
A3D
enom
inat
ion
Dra
wn
byC
heck
Size Dra
win
g N
o.
Shee
t
7
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to [email protected] with any questions. Diversion contrary to US law is prohibited.
20m
m0,
77in
199m
m7,
82in
58mm2,28in
33,3mm (2x)1,31in
171m
m6,
75in
33,3mm1,31in
70mm2,76in
70m
m2,
76in
35m
m1,
38in
35mm1,38in
12mm (3x)0,47in
24mm (3x)0,94in
52,3
mm
(3x)
2,06
inM
4 (6
x) UN
C 1
/4"-
20 (3
x)
0,
95in
24,3
mm
Cam
era
with
Len
s IR
f=30
mm
(15°
)
For a
dditi
onal
dim
ensi
ons
see
page
1
12
34
56
78
910
16
32
54
A B C D E F G H
FC E GDA B
-
-
Scal
e 1:1
ASi
ze
Mod
ified
R&D
The
rmog
raph
y20
12-0
4-18
CAH
A
Basi
c di
men
sion
s FL
IR A
3xx/
SC3x
x
T125
002
4(8)
A3D
enom
inat
ion
Dra
wn
byC
heck
Size Dra
win
g N
o.
Shee
t
7
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to [email protected] with any questions. Diversion contrary to US law is prohibited.
172m
m6,
76in
280m
m11
,03i
n
101,
1mm
3,98
in
109m
m4,
29in
48mm (2x)1,89in
33,3mm (2x)1,31in
96mm3,78in
Lens
sup
port
Opt
iona
lB
ase
supp
ort
Opt
iona
l
108,
5mm
4,27
in
48mm1,89in
8mm0,31in
70m
m2,
76in
54,3
mm
2,14
in
35m
m1,
38in
45m
m±0
,11,
77in
±0,0
0
54,3mm2,14in
88,5mm3,48in
54,5
mm
2,15
in
90m
m±0
,13,
54in
±0,0
0
UN
C 1
/4"-
20 (5
x)
4,
17in
105,
8mm
For a
dditi
onal
dim
ensi
ons
see
page
1
Cam
era
with
Len
s IR
f=76
mm
(6°)
incl
sup
port
12
34
56
78
910
16
32
54
A B C D E F G H
FC E GDA B
-
-
Scal
e 1:1
ASi
ze
Mod
ified
R&D
The
rmog
raph
y20
12-0
4-18
CAH
A
Basi
c di
men
sion
s FL
IR A
3xx/
SC3x
x
T125
002
5(8)
A3D
enom
inat
ion
Dra
wn
byC
heck
Size Dra
win
g N
o.
Shee
t
7
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to [email protected] with any questions. Diversion contrary to US law is prohibited.
162m
m6,
38in
341m
m13
,43i
n
172m
m6,
76in
68mm2,68in
33,3mm (2x)1,31in
Lens
sup
port
Opt
iona
l
82,5
mm
3,25
in
41,3
mm
1,62
in
33,3mm1,31in
70mm2,76in
55mm2,17in
41,3mm1,62in
12mm (3x)0,47in
24mm (3x)0,94in
194,
8mm
7,67
in
M4
(6x)
UN
C 1
/4"-
20 (3
x)
WD
=
21m
m0,
83in
Obj
ect p
lane
6,
56in
166,
8mm
For a
dditi
onal
dim
ensi
ons
see
page
1
Cam
era
with
Clo
se-u
p le
ns 1
X (2
5 µm
) inc
l sup
port
12
34
56
78
910
16
32
54
A B C D E F G H
FC E GDA B
-
-
Scal
e 1:1
ASi
ze
Mod
ified
R&D
The
rmog
raph
y20
12-0
4-18
CAH
A
Basi
c di
men
sion
s FL
IR A
3xx/
SC3x
x
T125
002
6(8)
A3D
enom
inat
ion
Dra
wn
byC
heck
Size Dra
win
g N
o.
Shee
t
7
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to [email protected] with any questions. Diversion contrary to US law is prohibited.
172m
m6,
76in
30,5
mm
1,2i
n20
9,5m
m8,
25in
55mm2,17in
33,3mm (2x)1,31in
12mm (3x)0,47in
24mm (3x)0,94in
M4
(6x)
UN
C 1
/4"-
20 (3
x)
35mm1,38in
63,2
mm
(3x)
2,49
in
WD
= 3
3mm
mm
1,3i
n
Obj
ect p
lane
33,3mm1,31in
70mm2,76in
35m
m1,
38in
70m
m2,
76in
1,
39in
35,2
mm
For a
dditi
onal
dim
ensi
ons
see
page
1
Cam
era
with
Clo
se-u
p le
ns 2
X (5
0 µm
)1
23
45
67
89
10
16
32
54
A B C D E F G H
FC E GDA B
-
-
Scal
e 1:1
ASi
ze
Mod
ified
R&D
The
rmog
raph
y20
12-0
4-18
CAH
A
Basi
c di
men
sion
s FL
IR A
3xx/
SC3x
x
T125
002
7(8)
A3D
enom
inat
ion
Dra
wn
byC
heck
Size Dra
win
g N
o.
Shee
t
7
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to [email protected] with any questions. Diversion contrary to US law is prohibited.
172m
m6,
76in
30,5
mm
1,2i
n
55mm2,17in
209,
5mm
8,25
in
33,3mm (2x)1,31in
70mm2,76in
33,3mm1,31in
70m
m2,
76in
35m
m1,
38in
12mm (3x)0,47in
24mm (3x)0,94in
35mm1,38in
63,2
mm
(3x)
2,49
in
M4
(6x)
UN
C 1
/4"-
20 (3
x)W
D =
79
mm
mm
3,11
in
Obj
ect p
lane
1,
39in
35,2
mm
For a
dditi
onal
dim
ensi
ons
see
page
1
Cam
era
with
Clo
se-u
p le
ns 4
X (1
00 µ
m)
12
34
56
78
910
16
32
54
A B C D E F G H
FC E GDA B
-
-
Scal
e 1:1
ASi
ze
Mod
ified
R&D
The
rmog
raph
y20
12-0
4-18
CAH
A
Basi
c di
men
sion
s FL
IR A
3xx/
SC3x
x
T125
002
8(8)
A3D
enom
inat
ion
Dra
wn
byC
heck
Size Dra
win
g N
o.
Shee
t
7
© 2012, FLIR Systems, Inc. All rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from FLIR Systems, Inc. Specifications subject to change without further notice. Dimensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US Export Regulations. Please refer to [email protected] with any questions. Diversion contrary to US law is prohibited.