flexible total separador carril bici skate · "skate green" permite reducir aún más la...
TRANSCRIPT
SKATESEPARADOR CARRIL BICI
URBANCITY IBÉRICAMontduber, 3
46960 Aldaia · VALENCIA (SPAIN)Tel. +34 96 151 53 44Fax +34 96 151 75 65
PARQUES Y JARDINES FÁBREGASGran Bretanya, 41 (Pol. Ind. Les Comes)08700 Igualada · BARCELONA (SPAIN)
Tel. +34 93 805 11 25Fax +34 93 803 27 31
POLIURETANOMod. C-430-TPU
C-430
C-430-AZURAL 5005
C-430-ROJRAL 3020
C-430-AMARAL 1021
C-430-VERRAL 6029
https://youtu.be/siPI0qIn5tchttps://youtu.be/awUYdnZmCTc
Videos:
POLIETILENOMod. C-430
20° MAX.
FLEXIBLE TOTALFULLY FLEXIBLE
CYCLE LANE SEPARATOR
FLEXIBLE PARCIAL PARTIALLY FLEXIBLE
Nº: CP-16-16-101-2
Producto certificado
Nº: CP-16-16-101-2
Producto certificado
DISEÑOCuerpo, con zonas reflectantes, bajo relieve para reducir el desgaste.
MANTENIMIENTOSe debe repintar periódicamente, cuando la pintura reflectante no sea visible.
OPCIONESPlantilla para facilitar la operación de mantenimiento.Los agujeros de anclaje, quedan ocultos mediante unos tapones insertados después de la instalación (Se venden por separado).
DESIGNBody with reflective areas, low relief to reduce wastage.
MAINTENANCEIt should be painted periodically, when the reflective paint is not visible.
OPTIONSTemplate to facilitate the maintenance operation.The anchor holes are concealed by plugs, inserted after installation. (Sold separately)
C-430-TPUGRIS
C-430-TPU C-430-TPU-ROJRAL 3020
C-430-TPU-AZURAL 5005
C-430-TPU-AMARAL 1021
C-430-TPU-VERRAL 6029
Superficie ancha y lisa, donde el ciclista puede apoyar el pié de forma estable, para evitar accidentes.
Wide surface and smooth, where the cyclist can stand the foot in a stable way, to avoid accidents.
Preparado para instalar mediante tacos de anclaje.Los agujeros se pueden realizar sin desplazar el separador de carril.
Ready for installation using anchoring plugs.The holes can be made without moving the lane separator.
Peso Reducido.Fácil manipulación e instalación.Fabricado con materiales reciclados.Totalmente reciclable.
Easy handling and installation.Made with recycled materials. Fully recyclable.
La zona reflectante, queda por debajo del cuerpo del separador de carril, para evitar un desgaste prematuro por fricción.
The reflective zone lies below the rail separator body to prevent premature friction wastage.
Tornillos de anclaje INOX A4 / INOX A4Bolts HIT-V-M12x150 mm / WS 9350 12x160 mmHIT V M12 150 / WS 9350 12
co / Taco químicT Chemical Dowel70 / Sika Anchorfix-1HILTI-HI-17H
Franjas laterales reflectantes.Reflective sidebars.
SKATESEPARADOR CARRIL BICI
URBANCITY IBÉRICAMontduber, 3
46960 Aldaia · VALENCIA (SPAIN)Tel. +34 96 151 53 44Fax +34 96 151 75 65
PARQUES Y JARDINES FÁBREGASGran Bretanya, 41 (Pol. Ind. Les Comes)08700 Igualada · BARCELONA (SPAIN)
Tel. +34 93 805 11 25Fax +34 93 803 27 31
POLIURETANOMod. C-430-TPU
C-430
C-430-AZURAL 5005
C-430-ROJRAL 3020
C-430-AMARAL 1021
C-430-VERRAL 6029
https://youtu.be/siPI0qIn5tchttps://youtu.be/awUYdnZmCTc
Videos:
POLIETILENOMod. C-430
20° MAX.
FLEXIBLE TOTALFULLY FLEXIBLE
CYCLE LANE SEPARATOR
FLEXIBLE PARCIAL PARTIALLY FLEXIBLE
Nº: CP-16-16-101-2
Producto certificado
Nº: CP-16-16-101-2
Producto certificado
DISEÑOCuerpo, con zonas reflectantes, bajo relieve para reducir el desgaste.
MANTENIMIENTOSe debe repintar periódicamente, cuando la pintura reflectante no sea visible.
OPCIONESPlantilla para facilitar la operación de mantenimiento.Los agujeros de anclaje, quedan ocultos mediante unos tapones insertados después de la instalación (Se venden por separado).
DESIGNBody with reflective areas, low relief to reduce wastage.
MAINTENANCEIt should be painted periodically, when the reflective paint is not visible.
OPTIONSTemplate to facilitate the maintenance operation.The anchor holes are concealed by plugs, inserted after installation. (Sold separately)
C-430-TPUGRIS
C-430-TPU C-430-TPU-ROJRAL 3020
C-430-TPU-AZURAL 5005
C-430-TPU-AMARAL 1021
C-430-TPU-VERRAL 6029
Superficie ancha y lisa, donde el ciclista puede apoyar el pié de forma estable, para evitar accidentes.
Wide surface and smooth, where the cyclist can stand the foot in a stable way, to avoid accidents.
Preparado para instalar mediante tacos de anclaje.Los agujeros se pueden realizar sin desplazar el separador de carril.
Ready for installation using anchoring plugs.The holes can be made without moving the lane separator.
Peso Reducido.Fácil manipulación e instalación.Fabricado con materiales reciclados.Totalmente reciclable.
Easy handling and installation.Made with recycled materials. Fully recyclable.
La zona reflectante, queda por debajo del cuerpo del separador de carril, para evitar un desgaste prematuro por fricción.
The reflective zone lies below the rail separator body to prevent premature friction wastage.
Tornillos de anclaje INOX A4 / INOX A4Bolts HIT-V-M12x150 mm - WS 9350 12x160 mmHIT V M12 150 WS 9350 12
co / Taco químicT Chemical Dowel70 - Sika Anchorfix-1HILTI-HI-17H
Franjas laterales reflectantes.Reflective sidebars.
SKATESEPARADOR CARRIL BICI
URBANCITY IBÉRICAMontduber, 3
46960 Aldaia · VALENCIA (SPAIN)Tel. +34 96 151 53 44Fax +34 96 151 75 65
PARQUES Y JARDINES FÁBREGASGran Bretanya, 41 (Pol. Ind. Les Comes)08700 Igualada · BARCELONA (SPAIN)
Tel. +34 93 805 11 25Fax +34 93 803 27 31
POLIURETANOMod. C-430-TPU
C-430
C-430-AZURAL 5005
C-430-ROJRAL 3020
C-430-AMARAL 1021
C-430-VERRAL 6029
https://youtu.be/siPI0qIn5tchttps://youtu.be/awUYdnZmCTc
Videos:
POLIETILENOMod. C-430
20° MAX.
FLEXIBLE TOTALFULLY FLEXIBLE
CYCLE LANE SEPARATOR
FLEXIBLE PARCIAL PARTIALLY FLEXIBLE
Nº: CP-16-16-101-2
Producto certificado
Nº: CP-16-16-101-2
Producto certificado
DISEÑOCuerpo, con zonas reflectantes, bajo relieve para reducir el desgaste.
MANTENIMIENTOSe debe repintar periódicamente, cuando la pintura reflectante no sea visible.
OPCIONESPlantilla para facilitar la operación de mantenimiento.Los agujeros de anclaje, quedan ocultos mediante unos tapones insertados después de la instalación (Se venden por separado).
DESIGNBody with reflective areas, low relief to reduce wastage.
MAINTENANCEIt should be painted periodically, when the reflective paint is not visible.
OPTIONSTemplate to facilitate the maintenance operation.The anchor holes are concealed by plugs, inserted after installation. (Sold separately)
C-430-TPUGRIS
C-430-TPU C-430-TPU-ROJRAL 3020
C-430-TPU-AZURAL 5005
C-430-TPU-AMARAL 1021
C-430-TPU-VERRAL 6029
Superficie ancha y lisa, donde el ciclista puede apoyar el pié de forma estable, para evitar accidentes.
Wide surface and smooth, where the cyclist can stand the foot in a stable way, to avoid accidents.
Preparado para instalar mediante tacos de anclaje.Los agujeros se pueden realizar sin desplazar el separador de carril.
Ready for installation using anchoring plugs.The holes can be made without moving the lane separator.
Peso Reducido.Fácil manipulación e instalación.Fabricado con materiales reciclados.Totalmente reciclable.
Easy handling and installation.Made with recycled materials. Fully recyclable.
La zona reflectante, queda por debajo del cuerpo del separador de carril, para evitar un desgaste prematuro por fricción.
The reflective zone lies below the rail separator body to prevent premature friction wastage.
Tornillos de anclaje INOX A4 / INOX A4Bolts HIT-V-M12x150 mm - WS 9350 12x160 mmHIT V M12 150 WS 9350 12
co / Taco químicT Chemical Dowel70 - Sika Anchorfix-1HILTI-HI-17H
Franjas laterales reflectantes.Reflective sidebars.
Separador carril bici con reflectante superior fijo pintado.820 x 200 x 127 mm
Cycle Lane Separator with superior reflective painted, fixed.820 x 200 x 127 mm
MODELO SKATE-G-BCN
MODELO SKATE-G
Separador carril bici con reflectante superior desmontable pintado.820 x 200 x 117 mm
Cycle Lane separator with superior reflector painted, removable.820 x 200 x 117 mm
MODELO SKATE-G-16
SK
AT
E -G
-16
117
200
84
397
820
150
SKATE-G-BCNSEPARADOR CARRIL BICICYCLE LANE SEPARATOR
SE
PAR
AD
OR
CA
RR
IL B
ICI
CYCL
E L
AN
E S
EPA
RA
TO
R
VENTAJAS AMBIENTALESCon este producto Parques y Jardines Fábregas, apuesta por
fomentar una economía circular, aplicando el principio " de la
cuna a la cuna ", (cradle to cradle).
Esto se debe a que las piezas están fabricadas con plástico 100%
reciclado procedente de residuo urbano o industrial, que ha
finalizado su ciclo de vida útil.
Esto supone que estos productos ejercen un menor impacto
ambiental, que queda contrastado tras realizar el análisis de
ciclo de vida de los mismos.
Así mismo, realizamos el cálculo de la Huella de Carbono, para
que nuestros clientes puedan comprobar cuánto CO2 han dejado
de emitir a la atmósfera al apostar por nuestros productos.
Una apuesta por la sostenibilidad. "Skate" está fabricado con PVC
postproducción triturado no granceado.
Con cada unidad evitamos emitir a la atmósfera 11,9 kg CO2 eq.
"Skate green" permite reducir aún más la huella de carbono.
Está fabricado con un mix de PVC postproducción y postconsu-
mo, con polímeros orgánicos ligeros.
"SKATE" forma parte de un proyecto europeo, "Life Future", que
proporciona una valiosa herramienta para cuantificar nuestra
contribución en la mitigación del Cambio Climático.
ENVIRONMENTAL ADVANTAGESWith this product, Parques y Jardines Fábregas, is committed to
promoting a circular economy, applying the principle of "cradle
to cradle".
This is because the parts are made of 100% recycled plastic
from urban or industrial waste, which has ended its life cycle.
This means that these products have a lower environmental
impact, which is contrasted after performing the analysis of
their life cycle.
Also, we carry out the calculation of the Carbon Footprint, so
that, our customers can check how much CO2 they have stopped
emitting to the atmosphere when choosing our products.
A commitment to sustainability. "Skate", is made of
non-granulated crushed post-production PVC.
With each unit, we avoid emitting 11.9 kg CO2 eq. "Skate Green"
allows us to reduce even more, the Carbon Footprint.
It is made with a mix of post-production and post-consumer
PVC, with light organic polymers.
“Skate” is part of a European project. "Life Future", which
provides a valuable tool for quantifying our contribution to
climate change mitigation.
POLIURETANOMod. C-430-TPU PLUS
FLEXIBLE TOTALFULLY FLEXIBLE
Nº: CP-16-16-101-2
Producto certificado
Supera una flexión de 1500 ciclos a 45° y 50 ciclos a 90°, sin daños
(Informe 16-31705992 emitido por LGAI Technological Center).
Clasificación “E” de comportamiento al fuego, según norma UNE-EN
13501-1:2007+A1:2010, y ensayo según norma UNE-EN 13238:2011
(Informe 16/13069-1884 parte 1 y 2 realizado por LGAI Technological
Center).
Resistente a -50° según norma UNE ISO 812 (Informe 16/31707091
realizado por LGAI Technological Center).
Conforme a la norma UNE EN 1176/1:2009
It surpasses a flexion of 1500 cycles at 45º and 50 cycles at 90º, without
damages (Report +16-31705992 Issued by LGAI Technological Center).
Fire classification “E” according UNE-EN 13501-1: 2007 + A1: 2010, and
test according UNE-EN 13238: 2011 (Report 16 / 13069-1884 part 1 and
2 carried out by LGAI Technological Center).
Resistant to -50º according UNE ISO 812 standard (Report 16/31707091
by LGAI Technological Center).
According the standard UNE EN 1176/1: 2009OPCIONAL / OPTIONAL
820 200
162
127
Separador carril bici con reflectante superior fijo pintado.820 x 200 x 127 mm
Cycle Lane Separator with superior reflective painted, fixed.820 x 200 x 127 mm
MODELO SKATE-G-BCN
MODELO SKATE-G
Separador carril bici con reflectante superior desmontable pintado.820 x 200 x 117 mm
Cycle Lane separator with superior reflector painted, removable.820 x 200 x 117 mm
MODELO SKATE-G-16
SK
AT
E -G
-16
117
200
84
397
820
150
SKATE-G-BCNSEPARADOR CARRIL BICICYCLE LANE SEPARATOR
SE
PAR
AD
OR
CA
RR
IL B
ICI
CYCL
E L
AN
E S
EPA
RA
TO
R
VENTAJAS AMBIENTALESCon este producto Parques y Jardines Fábregas, apuesta por
fomentar una economía circular, aplicando el principio " de la
cuna a la cuna ", (cradle to cradle).
Esto se debe a que las piezas están fabricadas con plástico 100%
reciclado procedente de residuo urbano o industrial, que ha
finalizado su ciclo de vida útil.
Esto supone que estos productos ejercen un menor impacto
ambiental, que queda contrastado tras realizar el análisis de
ciclo de vida de los mismos.
Así mismo, realizamos el cálculo de la Huella de Carbono, para
que nuestros clientes puedan comprobar cuánto CO2 han dejado
de emitir a la atmósfera al apostar por nuestros productos.
Una apuesta por la sostenibilidad. "Skate" está fabricado con PVC
postproducción triturado no granceado.
Con cada unidad evitamos emitir a la atmósfera 11,9 kg CO2 eq.
"Skate green" permite reducir aún más la huella de carbono.
Está fabricado con un mix de PVC postproducción y postconsu-
mo, con polímeros orgánicos ligeros.
"SKATE" forma parte de un proyecto europeo, "Life Future", que
proporciona una valiosa herramienta para cuantificar nuestra
contribución en la mitigación del Cambio Climático.
ENVIRONMENTAL ADVANTAGESWith this product, Parques y Jardines Fábregas, is committed to
promoting a circular economy, applying the principle of "cradle
to cradle".
This is because the parts are made of 100% recycled plastic
from urban or industrial waste, which has ended its life cycle.
This means that these products have a lower environmental
impact, which is contrasted after performing the analysis of
their life cycle.
Also, we carry out the calculation of the Carbon Footprint, so
that, our customers can check how much CO2 they have stopped
emitting to the atmosphere when choosing our products.
A commitment to sustainability. "Skate", is made of
non-granulated crushed post-production PVC.
With each unit, we avoid emitting 11.9 kg CO2 eq. "Skate Green"
allows us to reduce even more, the Carbon Footprint.
It is made with a mix of post-production and post-consumer
PVC, with light organic polymers.
“Skate” is part of a European project. "Life Future", which
provides a valuable tool for quantifying our contribution to
climate change mitigation.
POLIURETANOMod. C-430-TPU PLUS
FLEXIBLE TOTALFULLY FLEXIBLE
Nº: CP-16-16-101-2
Producto certificado
Supera una flexión de 1500 ciclos a 45° y 50 ciclos a 90°, sin daños
(Informe 16-31705992 emitido por LGAI Technological Center).
Clasificación “E” de comportamiento al fuego, según norma UNE-EN
13501-1:2007+A1:2010, y ensayo según norma UNE-EN 13238:2011
(Informe 16/13069-1884 parte 1 y 2 realizado por LGAI Technological
Center).
Resistente a -50° según norma UNE ISO 812 (Informe 16/31707091
realizado por LGAI Technological Center).
Conforme a la norma UNE EN 1176/1:2009
It surpasses a flexion of 1500 cycles at 45º and 50 cycles at 90º, without
damages (Report +16-31705992 Issued by LGAI Technological Center).
Fire classification “E” according UNE-EN 13501-1: 2007 + A1: 2010, and
test according UNE-EN 13238: 2011 (Report 16 / 13069-1884 part 1 and
2 carried out by LGAI Technological Center).
Resistant to -50º according UNE ISO 812 standard (Report 16/31707091
by LGAI Technological Center).
According the standard UNE EN 1176/1: 2009OPCIONAL / OPTIONAL
820 200
162
127
Separador carril bici con reflectante superior fijo pintado.820 x 200 x 127 mm
Cycle Lane Separator with superior reflective painted, fixed.820 x 200 x 127 mm
MODELO SKATE-G-BCN
MODELO SKATE-G
Separador carril bici con reflectante superior desmontable pintado.820 x 200 x 117 mm
Cycle Lane separator with superior reflector painted, removable.820 x 200 x 117 mm
MODELO SKATE-G-16
SK
AT
E -G
-16
117
200
84
397
820
150
SKATE-G-BCNSEPARADOR CARRIL BICICYCLE LANE SEPARATOR
SE
PAR
AD
OR
CA
RR
IL B
ICI
CYCL
E L
AN
E S
EPA
RA
TO
R
VENTAJAS AMBIENTALESCon este producto Parques y Jardines Fábregas, apuesta por
fomentar una economía circular, aplicando el principio " de la
cuna a la cuna ", (cradle to cradle).
Esto se debe a que las piezas están fabricadas con plástico 100%
reciclado procedente de residuo urbano o industrial, que ha
finalizado su ciclo de vida útil.
Esto supone que estos productos ejercen un menor impacto
ambiental, que queda contrastado tras realizar el análisis de
ciclo de vida de los mismos.
Así mismo, realizamos el cálculo de la Huella de Carbono, para
que nuestros clientes puedan comprobar cuánto CO2 han dejado
de emitir a la atmósfera al apostar por nuestros productos.
Una apuesta por la sostenibilidad. "Skate" está fabricado con PVC
postproducción triturado no granceado.
Con cada unidad evitamos emitir a la atmósfera 11,9 kg CO2 eq.
"Skate green" permite reducir aún más la huella de carbono.
Está fabricado con un mix de PVC postproducción y postconsu-
mo, con polímeros orgánicos ligeros.
"SKATE" forma parte de un proyecto europeo, "Life Future", que
proporciona una valiosa herramienta para cuantificar nuestra
contribución en la mitigación del Cambio Climático.
ENVIRONMENTAL ADVANTAGESWith this product, Parques y Jardines Fábregas, is committed to
promoting a circular economy, applying the principle of "cradle
to cradle".
This is because the parts are made of 100% recycled plastic
from urban or industrial waste, which has ended its life cycle.
This means that these products have a lower environmental
impact, which is contrasted after performing the analysis of
their life cycle.
Also, we carry out the calculation of the Carbon Footprint, so
that, our customers can check how much CO2 they have stopped
emitting to the atmosphere when choosing our products.
A commitment to sustainability. "Skate", is made of
non-granulated crushed post-production PVC.
With each unit, we avoid emitting 11.9 kg CO2 eq. "Skate Green"
allows us to reduce even more, the Carbon Footprint.
It is made with a mix of post-production and post-consumer
PVC, with light organic polymers.
“Skate” is part of a European project. "Life Future", which
provides a valuable tool for quantifying our contribution to
climate change mitigation.
POLIURETANOMod. C-430-TPU PLUS
FLEXIBLE TOTALFULLY FLEXIBLE
Nº: CP-16-16-101-2
Producto certificado
Supera una flexión de 1500 ciclos a 45° y 50 ciclos a 90°, sin daños
(Informe 16-31705992 emitido por LGAI Technological Center).
Clasificación “E” de comportamiento al fuego, según norma UNE-EN
13501-1:2007+A1:2010, y ensayo según norma UNE-EN 13238:2011
(Informe 16/13069-1884 parte 1 y 2 realizado por LGAI Technological
Center).
Resistente a -50° según norma UNE ISO 812 (Informe 16/31707091
realizado por LGAI Technological Center).
Conforme a la norma UNE EN 1176/1:2009
It surpasses a flexion of 1500 cycles at 45º and 50 cycles at 90º, without
damages (Report +16-31705992 Issued by LGAI Technological Center).
Fire classification “E” according UNE-EN 13501-1: 2007 + A1: 2010, and
test according UNE-EN 13238: 2011 (Report 16 / 13069-1884 part 1 and
2 carried out by LGAI Technological Center).
Resistant to -50º according UNE ISO 812 standard (Report 16/31707091
by LGAI Technological Center).
According the standard UNE EN 1176/1: 2009OPCIONAL / OPTIONAL
820 200
162
127