fivestarhv brochure

16

Upload: fivestarhv

Post on 09-Mar-2016

215 views

Category:

Documents


1 download

DESCRIPTION

FIVESTARHV Professional HV Testing Equipment Supplier From China (AC High Voltage / DC HV / AC High Current / Impulse Voltage Current)

TRANSCRIPT

Page 1: Fivestarhv brochure

FIVESTARHVProfessional HV Testing Equipment Supplier

From China

Fivestar HV Testing Equipment Co., Ltd

http://www.fivestarhv.com

Page 2: Fivestarhv brochure

Fivestar HV Testing Equipment Co., Ltd01

COMPANY PROFILE

Fivestar HV Testing Equipment Co., Ltd. located at seaside city of South of China, Xiamen.

We specialize in high voltage test equipment for utility and industrial applications.

We are the world's leading full-line manufacturer of high voltage test equipment and

measurement instrumentation, provides test, measurement and diagnostic equipments for

a wide range of electrical applications, such as testing project of power transformers,

instrument transformers, power cables, generators, motors, GIS switchgears, bushings,

insulators and etc. And test systems for laboratory, factory and field use are available.

WeWe have two main kinds of products, one is high power series, which mainly refers to the

high voltage testing equipment with very high power, such as AC dielectric test

transformer, resonance withstand voltage test system, impulse voltage generator, impulse

current generator, DC HV test set and etc. The other is HV electric series for the high

voltage testing electric equipment, such as hipot tester, light test transformer, portable

series resonance test equipment, VLF HV generator, DC HV generator, PD tester, insulation

tester, cable fault detector, tan delta tester and etc.

FivestarFivestar has a reputation for quality and reliability based on years of experience. Our

equipments are exported to lots of countries, such as Germany, Russia, Italy, Spanish,

Turkey, UAE, India, Indonesia, Vietnam, Thailand, Mexico, Brazil and many other countries.

Fivestar HV Testing Equipment Co., Ltd. is pleased to announce its quality management

system has been approved to ISO 9001.

WeWe has a dedicated service to sales and service team, good production environment,

first-class professional and technical personnel, high-quality staff, advanced production

equipment and scientific processing to ensure that our leading technology, stable quality,

reputation first.

High Power series: Website: Http://www.fivestarhv.com Email: [email protected]

HV electric series: Website: Http://www.hv-equipment.com Email: [email protected]

TEL: 0086-592-5320 837 MSN: [email protected]

Add: No. 108, Xiangeli, Siming District, Xiamen, China

Page 3: Fivestarhv brochure

Cylinder Type PD Free AC Test Transformer03

04

05

06

07

08

09

10

11

12

13

14

www.fivestarhv.com www.hv-equipment.com

Tank Type Alternating Voltage AC Test Transformer

Tank type AC Series Resonant Test System

Portable Series Resonance Test Equipment

DC High Voltage Test System

Impulse Voltage Test System

Impulse Current Test System

SF6 Gas Insulated High Voltage AC Test Transformer

Portable Test Transformer

Cylinder type Adjustable Inductance Resonance

Cylinder type Variable Frequency Series Resonance

SF6 Gas Insulated Series Resonant Test System

Heat Cycling Test System / Large Current System

PD Shielded Room Faraday Cage

Partial Discharge Test System

C & Tan Delta Test System

0.1HZ Very Low Frequency High Voltage Tester

Integrated Transformer Test Bench

Cable Fault Detector System Insulating Boots/Gloves Withstand Voltage Tester

Cable Test Termination (Water Termination and Water Conditioning Unit)

02

PRODUCT CATALOG

Page 4: Fivestarhv brochure

03 Fivestar HV Testing Equipment Co., Ltd

AC DIELECTRIC TEST SYSTEM

The AC test transformers are especially designed for

medium capacitance testing object, such as power

transformers, cables, generators, motors, GIS

switchgears, bushings and arresters. It’s particularly

suited for tests requiring stable voltage even if the

load changes under voltage (corona, wet and

pollution tests) or when the load is inductive

(inductive voltage transformers).(inductive voltage transformers).

The possibility of stacking several of these

transformer modules allows reaching very high

voltage levels by keeping reasonable floor space. We

have successfully experienced 2250kV 4500kVA test

transformer by three module cascaded.

Tank type AC test transformer is situated in an

enclosed and earthed metal tank. This transformer is

oil-cooled and can be optionally equipped with a

suitable bushing (oil to air or oil to SF6). It’s also

qualified for continuous duty, long duration tests.

TheThe capacity of tank type test transformer is larger

than cylinder type, it can be used for high voltage

pollution tests, test line and capacity required

continuous test. This design is most suitable for

using outdoor, and therefore is recommended to use

in areas with poor climatic conditions, especially in

high humidity areas and tropical countries.

6000kVA-3×500kV

Cylinder Type PD Free AC Test Transformer

Tank Type Alternating Voltage AC Test Transformer

Page 5: Fivestarhv brochure

www.fivestarhv.com www.hv-equipment.com 04

AC TEST TRANSFORMER

SF6 gas insulated test transformers are especially

designed for testing metal-clad switchgear (GIS) in

the factory and on-site, and for testing on-site

substation equipment. The conventional

transformer can be flanged directly to the GIS. This

makes testing of such installations possible

without feeding them through an air-SF6 bushing.

ThereforeTherefore the merits of the encapsulation remain

effective also during the test which is essential for

PD tests. These systems are particularly suited for

on-site tests of GIS after assembly. In the factory,

they allow to test sub-assemblies and components

directly in the manufacturing line, thus avoiding

transportation to a central test facility, and extra

handling.handling.

Portable test transformer are small volume, light weight, with compact structure and

multiple function, general purpose and easy to use. YDJ series is oil insulated, YDQ series is

SF6 gas insulated, GTB series is dry type, single voltage upto 150kV.

YDJ series YDQ series GTB series

SF6 Gas Insulated High Voltage AC Test Transformer

Portable Test Transformer

Page 6: Fivestarhv brochure

05

AC RESONANCE TEST SYSTEM

Adjustable inductance resonant test system is

designed to compensate capacitance in the

testing circuit precisely by tuning inductance of

the test system. The natural resonance frequency

of the test system matches feed-in mains, usually

50/60Hz. When the test system gets in resonance,

it generates continuous testing high voltage.

ItIt offers significant advantages to standard AC

test systems where the load is largely capacitive

with low loss such as power cables, GIS

switchgears, generator windings, motors,

transformers and dry testing of insulator strings.

Fivestar HV Testing Equipment Co., Ltd

Variable frequency resonant test system vary

the output frequency to tune the system to the

load capacitance creating a resonant circuit.

And the output frequency is typically in the

range of 20 to 300Hz. It is ideal for

commissioning tests of power cable and

GIS/GIL.

ComparedCompared to conventional AC test transformer,

the relatively low testing power required, and

the ability to make a direct comparison of the

factory and field tests, favors the variable

frequency resonant test system as the most

practical on-site test system.

Cylinder type Adjustable Inductance Resonance

Cylinder type Variable Frequency Series Resonance

Page 7: Fivestarhv brochure

06

SERIES RESONANT EQUIPMENT

Tank type AC series resonant test system is

special designed for the high capacitance load,

such as power cable. The huge system is suitable

for testing in the factory or on-site. There are two

different design: variable frequency or adjustable

inductance.

It’sIt’s widely used for MV capacitor testing, power

cable aging test, motor/generator testing and

other high power products testing.

ItsIts on-site testing system is movable and special

suitable for long distance paved power cable field

testing. The whole system are fixed on the truck (8

meters – 14 meters length, 2.5 meters width), the

truck can connected in series or parallel.

SF6 gas insulated series resonant test system is

special designed for testing of gas insulation

switchgear and gas insulation substations. The

system can be connected with the GIS directly,

which bring great convenient to the testing.

ComparedCompared to oil insulated resonant system, It has

the advantages of very low partial discharge

level, light weight, small volume and movable.

There are two different design: 30-200Hz

variable frequency or 50/60Hz adjustable

inductance.

www.fivestarhv.com www.hv-equipment.com

Tank type AC Series Resonant Test System

SF6 Gas Insulated Series Resonant Test System

Page 8: Fivestarhv brochure

07 Fivestar HV Testing Equipment Co., Ltd

PORTABLE RESONANCE SYSTEM

Output frequency: 30~300hz

Output waveform: sine wave

Waveform distortion: ≤1.0%

Duty cycle: continuous 60min

Quality factor: ≥30 at Un In

Frequency adjustment: 0.1hz

Instability: ≤0.01%Instability: ≤0.01%

Output frequency : 50Hz

Output waveform: sine wave

Waveform distortion: ≤1.0%

Duty cycle: continuous 1min

Quality factor: 10~40

Maximum capacity: ≤3000kVA

Output frequency: 45~65Hz

Output waveform: Sine wave

Waveform distortion: ≤1.0%

Duty cycle: Continuous 5min

Quality factor: 10~40

Frequency adjustment: 0.1Hz

Instability: ≤0.05%Instability: ≤0.05%

Maximum capacity: ≤5000kVA

Variable Frequency AC Resonance System

Adjustable Inductance AC Resonance System

Variable Frequency Adjustable Inductance Resonance

Page 9: Fivestarhv brochure

08www.fivestarhv.com www.hv-equipment.com

DC High Voltage Test System

High voltage DC test system is mainly used for HV technology research test, insulation

material research test and DC dielectric test of HV products, such as power cable, power

transformer, arrester, air gap, insulator chain, HV bushing and instrument transformer and

so on.

It can also measure the leakage current of insulation materials and high voltage

equipments, and also special suitable for using as high voltage direct current power source

in high voltage research institute and high school.

We offer a complete line of the most advanced DC dielectric test system with any voltage

power rating to meet your testing requirements. The rated voltage can be up to 2400kV DC.

Also we manufacture portable DC HV tester as following:

Portable DC HV Generator

Maximum output voltage: 300kV

Maximum output current: 10A

Factory Test System Field Test System

Page 10: Fivestarhv brochure

09 Fivestar HV Testing Equipment Co., Ltd

LIGHTNING IMPULSE TEST SYSTEM

Our advanced impulse voltage generator can be used

to generate impulse voltage from 10kV to 7200kV

simulating lightning strokes and switching surges, it

also can be used to generator chopping wave,

oscillating wave and steeping wave if add some extra

equipments.

TheThe basic system can be upgraded in various ways for

special tests and greater ease of operation. A number

of additional circuits and components allow optimizing

the impulse test system for testing different kind of

high voltage test objects, such as power transformer,

power cable, instrument transformer (CT/PT/CVT),

insulator, GIS/switchgear, arrester, shunt reactor and

other high voltage products.other high voltage products.

We can supply various structure of impulse voltage generator, all the system applied to IEC,

ANSI/IEEE as well as other national standards.

Impulse current test systems are used for

testing equipment applied in medium and high

voltage transmission & distribution system

against the effects of lightning strokes (direct

or indirect) or against electromagnetic

interference effects.

ItIt is also widely used for testing of arresters

and varistors, lightning protection elements,

wind generator, transmission lines and etc.

The impulse current generator can generate standard impulse current waveform such as

4/10μs, 8/20μs, 30/80μs, 1/20μs, 10/350μs, 10/1000μs, etc. The technical properties fit the

IEC standard, and reach the advanced level in the world.

Impulse Voltage Test System

Impulse Current Test System

Page 11: Fivestarhv brochure

10www.fivestarhv.com www.hv-equipment.com

POWER CABLE HV TEST SYSTEM

The cable test termination is used for high

voltage testing of extruded insulation

power cables, to improve and control the

electrical field distribution at the end of

the cable. There is pump at the bottom of

the termination which enable the system

height adjustment.

ItIt is suitable for the test of AC withstand

test, partial discharge test, impulse

voltage test and tan delta test of cables.

And it makes the testing fast and easy.

Voltage can be up to 800kV-200kW, suitable for the power cable up to 525kV.

Heat cycling test set is designed to raise and control

the temperature of the conduct simulating high

current load in electric circuit. The high current is

generated by the ring core heating transformer. And

temperature measuring is achieved by Rogowski Coil.

TheThe whole system is consisted by heating circuit and

measuring circuit. Temperature and current

measurement are available in our system.

In order to reach high current or voltage, our solution

is modules connection. With several modules series or

parallel, we can get high voltage or current to meet the

different requirement on testing.

Cable Test Termination/Water Termination/Water Conditioning Unit

Heat Cycling Test System / Large Current System

Page 12: Fivestarhv brochure

Fivestar HV Testing Equipment Co., Ltd11

PD SHIELDED ROOM FARADAY CAGE

PD shielded room, also known as faraday, can be used to eliminate electromagnetic field

interference, in order to make the suitable PD noise background when carry out partial

discharge test in accordance with IEC 60270.

It is suitable for partial discharge experiment and impulse test in different voltage band (110kV,

220kV, 500kV, 750kV, 1000kV) of power cables, power transformers, instrument transformers,

HV switches etc.

Shielding efficiency:

Frequency range 10KHz-100MHz, magnetic field≥80-110dB

Frequency range 1KHz-1GHz, electric field≥110dB

Isolation resistance: ≥500MΩ

Ground connection resistance: ≤1Ω

The design and size of the shielded room will be determined depending on the specific

application. They are separated into a test and control room. Furthermore they are equipped

with a PD-free lighting system, emergency lighting, and security loop. There is the option of

equipping the room with air-conditioning and a crane.

Page 13: Fivestarhv brochure

www.fivestarhv.com www.hv-equipment.com 12

PD TEST / C & TAN DELTA TEST

PD tester is used to measure and online monitor partial discharge for transformers,

cables, generators, arrestors, bushings, switches, GIS and etc. Apply to international

testing standard IEC 60270.

Measuring channel: single, independent two channels, four channels, or more

Measuring range of capacitance: 6pF~250µF

Detecting sensitivity: 0.1pC; Display method: oval-sine-linear

High precision HV capacitance bridge

Automatic Tan Delta Tester

Digital PD Tester Manual PD Tester

It is a high precision measuring bridge, takes advantage of

current comparison, which makes it extraordinary

precise and reliable in measurement and distinguishes

from Schering bridge and others. Work with HV standard

capacitors, the bridge can be used to measure

capacitance and tgδ of power cables, bushings,

capacitors, reactors and transformers under high voltage.

1. Output high voltage: 0.5 ~10kV, totally 10 gears,

increasing 500V for each gear.

2. Capacity: 1500VA

3. Accuracy: tgδ: ±(reading*1.0%+0.04%)

Cx: ±(reading*1.5%+5PF)

4. Resolution: tgδ:0.01%, Cx:1pF

5. Measurement range: 0.1% < tgδ < 50%

3PF < Cx < 60000PF 3PF < Cx < 60000PF

Partial Discharge Test System

C & Tan Delta Test System

Page 14: Fivestarhv brochure

Fivestar HV Testing Equipment Co., Ltd13

HV ELECTRIC SERIES

VLF HV tester is new generation of AC withstand voltage tester, replacing resonant withstand

voltage tester, is widely used in AC withstand voltage test of large capacity equipments such

as generator, cable, insulator, power capacitor, large transformer etc. Not only can it can be the

first choice of field and factory testing, but also as the ultra low frequency source.

Standard VLF Model:

VLF-30/1.1 Peak output voltage: 30kV

Suit for 10kV cable, generator, etc.

VLF-50/5.0 Peak output voltage: 50kV

Suit for burn-out of the cable

.

VLF-80/1.1 Peak output voltage: 80kVVLF-80/1.1 Peak output voltage: 80kV

Suit for 35kV cable, generator, etc.

This equipment mainly used for load & no-load test of transformer, also can carry out

frequency multiplication induced over voltage and withstand voltage test. Digital display,

on-load, short circuit data are sampled by single clip, avoid the error caused by voltmeter,

ammeter, wattmeter separately reading and calculated by people using traditional methods.

0.1HZ Very Low Frequency High Voltage Tester

Integrated Transformer Test Bench

Test Item:

1. Transformer no-load and load test.

2. Transformer ratio, group, error tests.

3. Transformer DC resistance test.

4. Transformer insulation resistance test.

5. Transformer voltage withstand test.

6. Transformer induced over voltage test.6. Transformer induced over voltage test.

7. Transformer temperature rise test.

8. Transformer Partial Discharge test.

More item can be customized upon request.

Page 15: Fivestarhv brochure

www.fivestarhv.com www.hv-equipment.com 14

HV ELECTRIC SERIES

Main Parameters:

1. Longest measured distance: 32km

(100km for open wire)

2. Detection blind area: 1m

3. Reading resolution: 1m

4. Power consumption: 5VA

Can be customized upon requestCan be customized upon request

AC&DC HV Meter

More requirement, please contact us!

Large Current Generator Frequency Tripling Transformer

1. Output voltage: 0-30kV

2. Capacity:3kVA

3. Numbers: 6 for each test

4. Accuracy: voltage ±2%, current ±2%

5. Can display and print the voltage and

leakage current for every measured boot.

6.6. Over-current and over-voltage protection;

self set time, voltage , leak current value.

Cable Fault Detector

Insulating Boots/Gloves Withstand Voltage Tester

Other HV Electric Tester

Page 16: Fivestarhv brochure

Email: [email protected]

Tel: +86 592 5320837

Fax: +86 592 6035287

Skype: roger_soso

MSN: [email protected]

Address: No.108 Xiangeli Garden, Siming District, Xiamen, China.

Website: www.fivestarhv.comWebsite: www.fivestarhv.com

Twitter: www.twitter.com/fivestarhv

Facebook: www.facebook.com/fivestarhv

Fivestar HV Testing Equipment Co., Ltd