fiŞa de verificare - doctorat.tuiasi.ro alegeri membri csud/dosare 2016... · i.apachiţei...
TRANSCRIPT
-
1
FIA DE VERIFICARE
a standardelor minimale pentri Comisia Ingineria Materialelor
Candidat: Prof.dr.ing.Leandru-Gheorghe BUJOREANU / Data naterii: 22.03.1959 / Funcia vizat: Director al Consiliului pentru studiile universitare de doctorat
(CSUD) de la IOSUD Universitatea Tehnic Gheorghe Asachi din Iai
Tabel 1: Conditii minimale / punctaje obtinute (in conformitate cu Domeniul CNATDCU de la titularizare sau abilitare)
Conditii minimale (Ai)
Nr crt. Domeniul de activitate Conditii Profesor Punctaj obtinut
1 Activitate didactica/profesionala (A1) 40 105,8
2 Activitate de cercetare (A2) 300 1101,6
3 Recunoasterea si impactul activitatii activitatii (A3) 60 1329,1
TOTAL (puncte) Minim : 400 2536,5
-
2
1.Structura activitii candidatului
Nr. crt. Domeniul activitilor Tipul activitilor Categorii i restricii Subcategorii Indicatori
(kpi)
0 1 2 3 4 5
1 Activitatea didactic i
profesional (A1)
105.8
1.1 Cri i capitole n cri de specialitate
72
1.1.1 Cri/capitole ca autor 1.1.1.1 internaionale nr. pagini/ 5 x nr. autori
7,8
L.G.Bujoreanu, Formation of transitory bainite as a precursor of -phase
during tempering of martensitic Cu-Zn-Al SMAs, in Shape Memory Alloys:
Manufacture, Properties and Applications, in Encyclopedia of Materials
Science Research, Volume 1, Editors: Batukhan B. Chinbat and Sora H.
Mori, Nova Science Publishers 2012, pp. 263-283, ISBN 978-1-61209-954-5
4
L.G.Bujoreanu, Chapter 9. Formation of transitory bainite as a precursor
of -phase during tempering of martensitic Cu-Zn-Al SMAs, in Shape
Memory Alloys: Manufacture, Properties and Applications, Editor H.R. Chen,
Nova Science Publishers 2010, pp. 267-285, ISBN 978-1-60741-789-7
3,8
1.1.1.2 naionale; Profesor
minim 2, d.c. 1 prim autor;
Confereniar minim 1
nr. pagini/10 x nr. Autori
64,2
R.Chelariu, L.G.Bujoreanu, i C.Roman, Materiale metalice biocompatibile
cu baza titan, Editura Politehnium, Iai, 215 pagini; 2006, ISBN (10) 973-
621-153-3; ISBN (13) 978-973-621-153-9
7,1
L.G.Bujoreanu, S.Stanciu, C.Munteanu i M.Susan, Memoria mecanic i
termic a aliajelor pe baz de Cu-Zn-Al, Editura Politehnium, Iai, 183
pagini; 2005, ISBN 973-621-111-8
4,5
L.G.Bujoreanu, C.Munteanu, Microstructural changes accompanying
thermal memory occurrence and stabilization in a Cu-Zn-Al SMA, Series
Advances in Micro- and Nanoengineering (Editors Irina Kleps, Dan Dasclu
and Jose Kenny), Editura Academiei Romne, Bucureti, pp. 110-120, 2004,
ISBN 973-27-1110-8
0,5
L.G.Bujoreanu Materiale inteligente, Editura Junimea, Iai, 339 pag.,
2002, ISBN 973-37-0735-X
33,9
L.G.Bujoreanu, V.Dia, E.Drgulnescu i G.Roescu, Tehnologie i utilaje
de obinere a unor aliaje cu memoria formei. Vol. II, Editura tiinific
4,1
-
3
Fundaia Metalurgia Romn, Bucureti, 166 pag., 1999, ISBN 973-
98314-8-6
L.G.Bujoreanu, V.Dia i S.Mrginean, Tehnologie i utilaje de obinere a
unor aliaje cu memoria formei. Vol.I, Editura tiinific Fundaia Metalurgia
Romn, Bucureti, 207 pag., 1998, ISBN 973-98314-2-7
6,9
L.G.Bujoreanu and S.Stanciu, Materiale cu Memoria Formei. Metode
Practice de Analiz, Editura Cermi, Iai, 144 pag., 1998, ISBN 973-9378-
28-5
7,2
1.2 Material didactic/ Lucrri didactice
18,8
1.2.1 Manuale didactice/ Monografii (minim
1)
nr. pagini/ 20 x nr. Autori
17,6
Rodinel Ardeleanu, Leandru-Gheorghe Bujoreanu, Gabriela Screscu,
Liviu Screscu i Mihaela Simionescu, Materiale nemetalice cu memoria
formei. Structur-proprieti-aplicaii, Editura tehnic, tiinific i didactic
CERMI, Iai, 219 pagini, 2007, ISBN 978-973-667-291-0
2,1
M.Nicu, N.Blb, L.G.Bujoreanu, S.Stanciu i F.Apostu, tiina i ingineria
materialelor. Vol. III Materiale moderne. Ediia a-II-a; Editura ECOZONE,
Iai, 188 pagini, 2006, ISBN Vol III: 973-7645-21-9
1,8
L.G.Bujoreanu i C.Baciu, Studiul materialelor. Teste i aplicaii; Editura
tehnic, tiinific i didactic CERMI, Iai, 198 pagini, 2003, ISBN 973-
8188-69-5
4,9
L.G.Bujoreanu, G.Roescu i I.Avram, Studiul materialelor din construcia
de maini, Editura tiinific Fundaia Metalurgia Romn, Bucureti, 321
pagini;1998, ISBN 973-98314-5-1
5,3
G.Calugaru, L.G.Bujoreanu, S.Stanciu, I.Hopulele, R.Climan, O.L.Turcu i
I.Apachiei Memoria formei. Fenomene i aplicaii n tiina materialelor,
Editura Plumb, Bacu, 208 pagini, 1995, ISBN 973-9150-50-0
1,4
G.Calugaru, I.Apachiei, R.Climan, O.L.Turcu i L.G.Bujoreanu, Materiale
avansate. Pulberi metalice amorfe, Editura Plumb, Bacu, 218 pagini,
1995, ISBN 973-9150-49-7
2,1
1.2.2 ndrumtoare de laborator/aplicaii
(minim 1);
nr. pagini/ 25 x nr. Autori
1,2
1.2.2.1 C.Baciu, C.Munteanu, I.Rusu, L.G.Bujoreanu, Maria Baciu i
I.Apachiei ndrumar pentru laborator. Studiul metalelor, Vol. I, Rotaprint,
I.P.Iai, 186 pagini, 1992
1,2
-
4
1.3 Coordonare de programe de studii,
organizare i coordonare programe de
formare continua i proiecte educaionale
15
Director/ Responsabil/ Membru Director -15; Responsabil -
10; Membru-5
Director program Curs de master MATERIALE AVANSATE SI TEHNICI DE
ANALIZA EXPERIMENTALA, Facultatea Stiinta si Ingineria Materialelor,
U.T.Iasi
15
2 Activitatea de cercetare
(A2)
1101,6
2.1 Articole n reviste cotate ISI Thomson
Reuters i n volume indexate ISI proceedings
608,54
Minim 15 articole pentru Profesor/ CS I din
care min. 10 n Reviste cotate ISI Th.R., din
care min. 5 cu FI de min. 0,5, i min. 5 ca
autor principal indiferent de FI
Reviste: (25 + 20xFI)/ nr.
autori; Volume: 20/ nr.
Autori [max. 3 articole/
manifestare]
2.1.1 Gigi Vitel, Bogdan Pricop, Marius-Gabriel Suru, Nicoleta Monica
Lohan, and Leandru-Gheorghe Bujoreanu, Study of Temperature
Memory Effect During the Thermal Cycling in Hydraulic Systems, Journal of
Testing and Evaluation, VOL. 44 / NO. 4 / JULY 2016, pp. 1525-1534,
doi:10.1520/JTE20140138. ISSN 0090-3973, IMPACT FACTOR on 2015:
0,423
6,69
2.1.2 Marius Gabriel Suru, Nicoleta Monica Lohan, Bogdan Pricop, Elena
Mihalache, Mihai Mocanu, Leandru-Gheorghe, Bujoreanu, Precipitation
Effects on the Martensitic Transformation in a CuAlNi Shape Memory Alloy,
Journal of Materials Engineering and Performance, 25(4), 2016, pp. 1562
1569, DOI: 10.1007/s11665-016-1981-z, IMPACT FACTOR on 2015:
1,094
7,81
2.1.3 B. Pricop, B. zkal, U. Syler, J. Van Humbeeck, N. M. Lohan, M.-
G. Suru,, I.-P. Spiridon, and L.-G. Bujoreanu, Structural changes caused
by high-temperature holding of powder shape memory alloy 66% Fe 14%
Mn 6% Si 9% Cr 5% Ni, Metal Science and Heat Treatment, Vol. 57,
Nos. 9 10, January, 2016, 553-558, ISSN 0026-0673, DOI
10.1007/s11041-016-9921-z, IMPACT FACTOR: 0,254
3,76
2.1.4 I.-P. Spiridon, N.-M. Lohan, M.-G. Suru, E. Mihalache, L.-G.
Bujoreanu, and B. Pricop, A study of free recovery in a Fe Mn Si Cr
shape memory alloy, Metal Science and Heat Treatment, Vol. 57, Nos. 9
10, January, 2016, 548-552, ISSN 0026-0673, DOI 10.1007/s11041-016-
9920-z, IMPACT FACTOR: 0,254
5,01
2.1.5 Bogdan Pricop, Elena Mihalache, Monica-Nicoleta Lohan, Bogdan
Istrate, Mihai Mocanu, Burak Ozkal, Leandru-Gheorghe Bujoreanu,
Powder metallurgy and mechanical alloying effects on the formation of
thermally induced martensite in an FeMnSiCrNi SMA, ESOMAT 2015, MATEC
Web of Conferences, 33, 04004 (2015), DOI: 10.1051/ matecconf/
3,57
-
5
20153304004
2.1.6 Elena Mihalache, Bogdan Pricop, Marius-Gabriel Suru, Nicoleta
Monica Lohan, Radu Ioachim Comneci, Bogdan Istrate, Burak zkal and
Leandru-Gheorghe Bujoreanu, Factors influencing martensite transitions
in Fe-based shape memory alloys, ESOMAT 2015, MATEC Web of
Conferences, 33, 04002 (2015), DOI: 10.1051/ matecconf/ 20153304002
3,12
2.1.7 Leandru-Gheorghe Bujoreanu, Viorel Goan, Nicanor
Cimpoeu, Carmela Guru, Marius-Gabriel Suru, Elena Mihalache and
Gheorghe Guru, Hardness-gradient reversion in FeMnSiCr shape memory
alloy modules produced by high-speed high pressure torsion, ESOMAT
2015, MATEC Web of Conferences, 33, 04001 (2015), DOI: 10.1051/
matecconf/ 20153304001
3,57
2.1.8 M.G. Suru, C. Moroanu, R.I. Comneci, E. Mihalache, B. Pricop,
N.M. Lohan, C. Baciu, L.G. Bujoreanu, Comparative Evolution of Surface
Relieves of Stress-Induced Martensite Plates in Shape Memory Alloys with
Different Crystalline Structures, Materials Today: Proceedings, 2(S3), 2015,
pp. S957-S960, ISSN: 2214-7853, d.o.i. 10.1016/j.matpr.2015.07.440
3,12
2.1.9 C. Gurau, G. Gurau, L. G. Bujoreanu, F. M. B. Fernandes, A
comparative study of austenitic structure in NiTi and Fe based shape
memory alloys after severe plastic deformation, Materials Today:
Proceedings, 2(3), 2015, pp. S905 S908, ISSN: 2214-7853, d.o.i.
10.1016/j.matpr.2015.07.428
6,25
2.1.10 G. Gurau, C. Gurau, F. M. B. Fernandes, L. G. Bujoreanu, Effect
of High Speed High Pressure Torsion parameters on grain refinement of
coned shape Fe based Shape Memory Alloy active elements, Materials
Today: Proceedings, 2(S3), 2015, pp. S897 S900, ISSN: 2214-7853,
d.o.i. 10.1016/j.matpr.2015.07.426
6,25
2.1.11 B. Pricop, U. Syler, B. zkal, M.G. Suru, N.M. Lohan, R.I.
Comneci, N. Cimpoeu, V.Muat, G. Guru, B. Istrate, E. Mihalache, L.G.
Bujoreanu, A Study of Martensite Formation in Powder Metallurgy Fe-Mn-
Si-Cr-Ni Shape Memory Alloys, Materials Today: Proceedings, 2(S3), 2015,
pp. S789 S792, ISSN: 2214-7853, d.o.i. 10.1016/j.matpr.2015.07.400
2,08
2.1.12 L.-G. BUJOREANU, N. M. LOHAN, M.-G. SURU, A. PLESCA
Thermal analysis of eutectic alloy at HBC fuses, Journal of Optoelectronics
and Advanced Materials, 17(9-10), 2015, pp. 1500-1506, ISSN 1454-4164,
IMPACT FACTOR: 0,383
8,16
2.1.13 L.G. BUJOREANU, Development of shape memory and
superelastic applications of some experimental alloys, Journal of
Optoelectronics and Advanced Materials, 17(9-10), 2015, pp. 1437-1443,
ISSN 1454-4164, IMPACT FACTOR: 0,383
32,66
-
6
2.1.14 N. M. LOHAN, E. MIHALACHE, B. PRICOP, M.G. SURU, L.G.
BUJOREANU, A study of R-phase transition and temperature memory
effect in a commercial Nitinol wire, Journal of Optoelectronics and Advanced
Materials, 17(9-10), 2015, pp. 1431-1436, ISSN 1454-4164, IMPACT
FACTOR: 0,383
6,53
2.1.15 E. MIHALACHE, F. BORZA, N. LUPU, N. M. LOHAN, B. PRICOP, M.-
G. SURU, L.-G. BUJOREANU, Thermomechanical processing effects on the
martensitic transformation in Fe-based SMAs, Journal of Optoelectronics
and Advanced Materials, 17(9-10), 2015, pp. 1344-1347, ISSN 1454-4164,
IMPACT FACTOR: 0,383
4,66
2.1.16 R Comneci, L Zaharia, D Nedelcu and L G Bujoreanu, Processing
of cylindrical hollow parts: piercing vs. extrusion, Modern Technologies in
Industrial Engineering (ModTech2015), IOP Conf. Series: Materials Science
and Engineering 95 (2015) 012032 doi:10.1088/1757-899X/95/1/012032
6,25
2.1.17 R. COMANECI, L. G. BUJOREANU, C. BACIU, A. M. PREDESCU, D.
SAVASTRU, Finite element analysis of equal channel angular pressing by
using a multi-pass die, Optoelectronics and Advanced Materials Rapid
Communications, 9(9-10), 2015, pp. 1322 1327, ISSN 1842-6573,
IMPACT FACTOR: 0,412
6,64
2.1.18 L G Bujoreanu, R I Comneci, G Guru, N M Lohan, M G Suru, B
Pricop, V Goan, V Muat, B Istrate & E Mihalache, Thermomechanical
training effects of multifunctional modules processed by high-speed high
pressure torsion, Indian Journal of Engineering and Materials Sciences, Vol
22(4), 2015, pp. 367-375, ISSN 0971-4588, IMPACT FACTOR: 0,413
3,32
2.1.19
2.1.20 M-G. Suru, N.M. Lohan, B. Pricop, I.P. Spiridon, E. Mihalache, R.I.
Comaneci and L-G. Bujoreanu, Structural effects of high-temperature
plastic deformation process on martensite plate morphology in a Fe-Mn-Si-
Cr SMA, International Journal of Materials and Product Technology, Vol. 50,
Nos. 3/4, 2015, pp. 276-288, IMPACT FACTOR: 0,261
4,31
2.1.21 Nicoleta Monica Lohan, Marius-Gabriel Suru, Bogdan Pricop,
Leandru-Gheorghe Bujoreanu, Cooling rate effects on the structure and
transformation behavior of CuZnAl shape memory alloys, International
Journal of Minerals, Metallurgy and Materials, Volume 21, Number 11, 2014,
pp. 1109-1114, ISSN: 1674-4799, IMPACT FACTOR: 0,791
8,66
-
7
2.1.22 Marius-Gabriel Suru, Adrian-Liviu, Paraschiv, Nicoleta Monica
Lohan, Bogdan Pricop, Burak Ozkal, Leandru-Gheorghe Bujoreanu,
Loading Mode and Environment Effects on Surface Profile Characteristics of
Martensite Plates in Cu-Based SMAs, Journal of Materials Engineering and
Performance, 23(7), 2014, pp. 2669-2676, ISSN 1059-9495, IMPACT
FACTOR: 0,998
7,49
2.1.23 GURU, Gheorghe, GURU, Marlen, POTECAU, Octavian,
ALEXANDRU, Petric, Bujoreanu, Leandru, Novel high speed high
pressure torsion technology for obtaining Fe-Mn-Si-Cr shape memory alloy
active elements, Journal of Materials Engineering and Performance, 23(7),
2014, pp. 2396-2402, ISSN 1059-9495, IMPACT FACTOR: 0,998
8,99
2.1.24 A. Umut Syler, Burak zkal and Leandru G. Bujoreanu,
Improvement of shape memory characteristics of Fe-14Mn-6Si-9Cr-5Ni
powder metallurgy alloy via mechanical alloying, Journal of Materials
Engineering and Performance, 23(7), 2014, pp. 2357-2361, ISSN 1059-
9495, IMPACT FACTOR: 0,998
14,98
2.1.25 G. Guru, C. Guru, F. M. Braz Fernandes, L. G. Bujoreanu, An
Experimental Study on the Response of Equal Channel Angular Pressed
Aluminum Subjected to Cold Rolling, Indian Journal of Engineering and
Materials Sciences, Vol 21(3), 2014, pp. 253-258, ISSN 0971-4588,
IMPACT FACTOR: 0,413
6,65
2.1.26 M.-G. SURU, C. MOROANU, L.-G. BUJOREANU, Variation
tendencies of shape memory alloys surface relief as a function of training-
cycling parameters, Journal of Optoelectronics and Advanced Materials, Vol.
16, No. 3-4, 2014, pp. 394-400, ISSN 1454-4164, IMPACT FACTOR:
0,429
11,19
2.1.27 B. PRICOP, B. ZKAL, U. SYLER, J. VAN HUMBEECK, N. M.
LOHAN, M. G. SURU, L.-G. BUJOREANU, Influence of mechanically alloyed
fraction and hot rolling temperature in the last pass on the structure of Fe-
14Mn-6Si-9Cr-5Ni (mass. %) shape memory alloys processed by powder
metallurgy, Optoelectronics and Advanced Materials Rapid
Communications, Vol. 8, No. 3-4, 2014, p. 247 250, ISSN 1842-6573,
IMPACT FACTOR: 0,394
4,69
2.1.28 M.-G. Suru, I. Dan, N. M. Lohan, A. L. Paraschiv, B. Pricop, I. P.
Spiridon, C. Baciu, L.-G. Bujoreanu, Effects of hot working procedure on
surface relief characteristic in an FeMnSiCr shape memory alloy,
Materialwissenschaft und Werkstofftechnik, 45(1), 2014, pp. 4450, ISSN
0933-5137, IMPACT FACTOR: 0.425
4,18
2.1.29 A. L. PARASCHIV, F. BORZA, M.-G. SURU, B. PRICOP, I. P.
SPIRIDON, E. MIHALACHE, L.-G. BUJOREANU, Chemical composition and 4,72
-
8
processing effects on the pseudoelastic response of ferromagnetic
martensite, Optoelectronics and Advanced Materials-Rapid Communications,
Vol. 7, No. 11-12, 2013, p. 881 - 886, ISSN 1842-6573, IMPACT FACTOR:
0, 402
2.1.30 I. P. SPIRIDON, B. PRICOP, M. G. SURU, A. L. PARASCHIV, N. M.
LOHAN, L-G. BUJOREANU, The influence of heat treatment atmosphere
and maintaining period on the homogeneity degree of a Fe-Mn-Si-Cr-Ni
shape memory alloy obtained through powder metallurgy, Journal of
Optoelectronics and Advanced Materials 15(7-8), 2013, pp. 730 733,
ISSN 1454-4164, IMPACT FACTOR: 0.516
5,88
2.1.31 A.-L. PARASCHIV, F. BORZA, N. LUPU, M.-G. SURU, N. M. LOHAN,
B. PRICOP, I.-P. SPIRIDON, L.-G. BUJOREANU, On some structural
characteristics of Fe-base shape memory alloys, Journal of Optoelectronics
and Advanced Materials 15(7-8), 2013, pp. 781 784, ISSN 1454-4164,
IMPACT FACTOR: 0.516
4,41
2.1.32 M. G. SURU, A. L. PARASCHIV, B. PRICOP, L. G. BUJOREANU, A
statistical evaluation of thermomechanical loading effects on martensite
plate morphology in CuZnAl SMAs, Optoelectronics and Advanced Materials-
Rapid Communications, Vol. 7, No. 1-2, January - February 2013, p. 141 -
144, ISSN 1842-6573, IMPACT FACTOR: 0, 402
8,26
2.1.33 Bogdan Pricop, Umut Syler, Burak zkal, Nicoleta Monica Lohan,
Adrian Liviu Paraschiv, Marius Gabriel Suru and Leandru-Gheorghe
Bujoreanu, Influence of mechanical alloying on the behavior of Fe-Mn-Si-
Cr-Ni shape memory alloys made by powder metallurgy, Materials Science
Forum Vols. 738-739 (2013) pp 237-241, ISSN 1662-9752
3,12
2.1.34 G. Vitel, M. G.Suru, A. L. Paraschiv, N. M. Lohan, B. Pricop, M.
Baciu, L. G. Bujoreanu, Structural effects of training cycles in shape
memory actuators for temperature control, Materials and Manufacturing
Processes, 28(1), pp. 79-84, 2013, ISSN 1042-6914,
DOI:10.1080/10426914.2012.700157, IMPACT FACTOR: 1,297
12,73
2.1.35 M.-G. Suru, L.-G.Bujoreanu, Comparative topographic study of
surface micro-relief of primary martensite plates in shape memory alloys
with different crystalline structures, Materialwissenschaft und
Werkstofftechnik 43(11), pp. 973-978, 2012, ISSN 0933-5137, DOI
10.1002/mawe.201200986, IMPACT FACTOR: 0,543
17,93
2.1.36 B. Pricop, U. Syler, N.M.Lohan, B.zkal, L.G.Bujoreanu, D.
Chicet, C. Munteanu, Thermal behavior of mechanically alloyed powders
used for producing an Fe-Mn-Si-Cr-Ni shape memory alloy, Journal of
Materials Engineering and Performance, 21(11), pp 24072416, 2012, ISSN
1059-9495, DOI: 10.1007/s11665-012-0168-5, IMPACT FACTOR: 0,855
6,01
-
9
2.1.37 N.M.Lohan, L.G.Bujoreanu, C.Baciu, Influence of temperature
variation rate on the calorimetric response during heating and on the
martensite structure obtained after subsequent cooling of a Cu-Zn-Al shape
memory alloy, Micro & Nano Letters, 7(6), pp. 540543, 2012, ISSN 1750-
0443, IMPACT FACTOR: 0,944
14,62
2.1.38 L.-G. Bujoreanu, N. M. Lohan, B. Pricop and N. Cimpoeu, On role
of atomic migration in amnesia occurrence during complex thermal cycling
of CuZnAl shape memory alloy, Materials Science and Technology, 28(6),
pp. 658-667, 2012, ISSN 0267-0836, IMPACT FACTOR: 0,772
10,11
2.1.39 G. Vitel, A. L. Paraschiv, M. G. Suru, N. Cimpoesu, L.-G.
Bujoreanu, Tempering effects in a normalized hot forged Cu-Zn-Al shape
memory alloy, Optoelectronics and Advanced Materials-Rapid
Communications, 6(1-2), pp. 339-342, 2012, ISSN 1842-6573, IMPACT
FACTOR: 0,304
6,21
2.1.40 Nicoleta Monica Lohan, Bogdan Pricop, Leandru-Gheorghe
Bujoreanu, Nicanor Cimpoesu, Heating rate effects on reverse martensitic
transformation in a CuZnAl shape memory alloy, International Journal of
Materials Research, 102(11), pp. 1345-1351, 2011, DOI:
10.3139/146.110595, ISSN 1862-5282, IMPACT FACTOR: 0,83
10,4
2.1.41 G. Vitel, A. L. Paraschiv, M. G. Suru, N. Cimpoesu, L.-G.
Bujoreanu, New calorimetric-structural aspects of temperature memory
effect in hot rolled Cu-Zn-Al SMAs, Optoelectronics and Advanced Materials-
Rapid Communications, 5(8), pp. 858-862, 2011, ISSN 1842-6573,
IMPACT FACTOR: 0,304
6,21
2.1.42 B. Pricop, U. Syler, N. M. Lohan, B. zkal, D. Chicet, A. David, L.-
G. Bujoreanu, Mechanical alloying effects on the thermal behaviour of a
Fe-Mn-Si-Cr-Ni shape memory alloy under powder form, Optoelectronics
and Advanced Materials-Rapid Communications, 5(5), pp. 569 575, 2011,
ISSN 1842-6573, IMPACT FACTOR: 0,304
4,44
2.1.43 A. Umut Syler, Burak zkal, Leandru G. Bujoreanu,
Investigation of Mechanical Alloying Process Parameters on Fe-Mn-Si Based
System, Supplemental Proceedings: Volume 1: Materials Processing and
Energy Materials TMS (The Minerals, Metals & Materials Society) pp. 577-
583, 2011
8,33
2.1.44 L. G. Bujoreanu, N. M. Lohan, B. Pricop, N. Cimpoeu, Thermal
memory degradation in a Cu-Zn-Al shape memory alloy during thermal
cycling with free air cooling, Journal of Materials Engineering and
Performance, 20(3) pp. 468475, 2011, DOI: 10.1007/s11665-010-9702-5,
ISSN 1059-9495, IMPACT FACTOR: 0,855
10,52
-
10
2.1.45 B. Pricop, U. Syler, R. I. Comneci, B. zkal, L. G. Bujoreanu,
Mechanical cycling effects at Fe-Mn-Si-Cr-Ni SMAs obtained by powder
metallurgy, Physics Procedia 10 pp. 125131, 2010, ISSN 1875-3892
5
2.1.46 A. Umut Syler, Burak zkal, Leandru G. Bujoreanu, Sintering
Densification and Microstructural Characterization of Mechanical Alloyed Fe-
Mn-Si based Powder Metal System, Supplemental Proceedings: Volume 3
General Paper Selection TMS (The Minerals, Metals & Materials Society), pp.
785-792, 2010
8,33
2.1.47 C. Lohan, B. Pricop, R. I. Comneci, N. Cimpoeu, L.-G.
Bujoreanu, Variation tendencies of tensile constrained recovery behaviour
and associated structural changes during thermal cycling of a Fe-Mn-Si-Cr-
Ni shape memory alloy, Optoelectronics and Advanced Materials-Rapid
Communications, 4(6), pp. 816-820, 2010, ISSN 1842-6573, IMPACT
FACTOR: 0.477
6,9
2.1.48 Leandru-Gheorghe Bujoreanu, Marcus L. Young, Susanne
Gollerthan, Christoph Somsen, Gunther Eggeler, Influence of heat
treatment and microstructure on the tensile pseudoelastic response of an
Ni-rich NiTi shape memory alloy, International Journal of Materials
Research, 101(5) pp. 623-630, 2010, ISSN 1862-5282, IMPACT
FACTOR:0,86
8,46
2.1.49 L. G. Bujoreanu, S. Stanciu, B. zkal, R.I.Comneci, M. Meyer,
Comparative study of the structures of Fe-Mn-Si-Cr-Ni shape memory alloys
obtained by classical and by powder metallurgy, respectively, in ESOMAT
2009 - The 8th European Symposium on Martensitic
Transformations, 05003, 2009, edited by P. ittner, L. Heller and V.
Paidar, published by EDP Sciences, DOI:10.1051/esomat/200905003
5
2.1.50 S. Stanciu, L. G. Bujoreanu, R.I.Comneci, N. Cimpoeu, I.
Ioni, V.V.Moldoveanu, Particularities of phase transitions in
thermomechanically processed Cu-Al-Mn shape memory alloys, in ESOMAT
2009 - The 8th European Symposium on Martensitic
Transformations, 05004, 2009, edited by P. ittner, L. Heller and V.
Paidar, published by EDP Sciences, DOI:10.1051/esomat/200905004
4,16
2.1.51 Stanciu, L.-G. Bujoreanu, N. Cimpoeu, I, Ioni, V.V.
Moldoveanu, Shape memory effect and related characteristics of helical
springs made from Cu-Al-Ni alloy by investment casting, Optoelectronics
and Advanced Materials-Rapid Communications 3(6) pp. 581-585, 2009,
ISSN 1842-6573, IMPACT FACTOR: 0.451
6,66
2.1.52 L. G. Bujoreanu, S. Stanciu, R. I. Comneci, M. Meyer, V. Dia, C.
Lohan, Factors influencing the reversion of stress-induced martensite to
austenite in a Fe-Mn-Si-Cr-Ni shape memory alloy, Journal of Materials
6,14
-
11
Engineering and Performance 18(5-6) August, pp. 500-505, 2009, ISSN
1059-9495, IMPACT FACTOR: 0,592
2.1.53 Leandru G. Bujoreanu, Sergiu Stanciu, Paul Brsnescu, and
Nicoleta M. Lohan, Study of the transitory formation of 1 bainite, as a
precursor of -phase in tempered SMAs, in Advanced Topics in
Optoelectronics, Microelectronics, and Nanotechnologies IV, edited by Paul
Schiopu, Cornel Panait, George Caruntu, Adrian Manea, Proceedings of
SPIE, Vol. 7297, (SPIE, Bellingham, WA, 2009), 72970B (d.o.i.
10.1117/12.823620), ISSN 0277-786X
6,25
2.1.54 Sergiu Stanciu, Leandru G. Bujoreanu, Iulian Ioni, Andrei V.
Sandu and Alexandru Enache, A structural-morphological study of a
Cu63Al26Mn11 shape memory alloy, in Advanced Topics in Optoelectronics,
Microelectronics, and Nanotechnologies IV, edited by Paul Schiopu, Cornel
Panait, George Caruntu, Adrian Manea, Proceedings of SPIE, Vol. 7297,
(SPIE, Bellingham, WA, 2009), 72970C, d.o.i. 10.1117/12.823621, ISSN
0277-786X
5
2.1.55 T. Sawaguchi, L.-G. Bujoreanu, T. Kikuchi, K. Ogawa, M.
Koyama, M. Murakami, Mechanism of reversible transformation-induced
plasticity of Fe-Mn-Si shape memory alloys, Scripta Materialia 59(10), pp.
826-829, 2008, ISSN 1359-6462, IMPACT FACTOR: 2.887
13,79
2.1.56 M. Susan, L.-G. Bujoreanu, C.L. Dumitrache, L.C.Hanganu,
C.Baciu, A kinematical study of ultrasonic welding based on a system of
stationary waves, Journal of Optoelectronics and Advanced Materials 10(6)
June, pp. 1425-1430, 2008, ISSN 1454-4164, IMPACT FACTOR: 0,577
7,3
2.1.57 S. Stanciu, L.-G. Bujoreanu, B. zkal, M. L. veolu, A. V.
Sandu, Study of precipitate formation in CuAlNiMnFe shape memory
alloys, Journal of Optoelectronics and Advanced Materials 10(6) June, pp.
1365-1369, 2008, ISSN 1454-4164, IMPACT FACTOR: 0,577
7,3
2.1.58 L.-G. Bujoreanu, S. Stanciu, A. Enache, C. Lohan, I. Rusu,
Influence of some extrinsic factors on the two way shape memory effect of
electric actuators, Journal of Optoelectronics and Advanced Materials 10(3)
March, pp. 602-606, 2008, ISSN 1454-4164, IMPACT FACTOR: 0,577
7,3
2.1.59 L.G.Bujoreanu, V. Dia, S. Stanciu, M. Susan, C. Baciu, Study of
tensile constrained recovery behavior of a Fe-Mn-Si shape memory alloy,
European Physical Journal, Special Topics, 158, May, 2008 pp. 15-20, ISSN
1951-6355, IMPACT FACTOR: 0.689
7,75
2.1.60 L.G.Bujoreanu, On the influence of austenitization on the
morphology of -phase in tempered Cu-Zn-Al shape memory alloys,
Materials Science and Engineering A, 481-482, 2008, pp. 395-403, 2008,
ISSN 0921-5093, IMPACT FACTOR: 1.806
61,12
-
12
2.1.61 S. Stanciu, and L. G. Bujoreanu, Formation of '1 stress-induced
martensite in the presence of phase in a Cu-Al-Ni-Mn-Fe shape memory
alloy, Materials Science and Engineering A, pp. 481-482, 2006, pp. 494-
499, 2008 ISSN 0921-5093, IMPACT FACTOR: 1.806
30,56
2.1.62 V. Dia, L.G.Bujoreanu, S. Stanciu, C. Munteanu, Study of shape
memory effect in lamellar helical springs made from Cu-Zn-Al SMA,
Materials Science and Engineering A 481-482, 2008, pp. 697-701, 2008,
ISSN 0921-5093, IMPACT FACTOR: 1.806
15,28
2.1.63 T. Sawaguchi, L.-G. Bujoreanu, T. Kikuchi, K. Ogawa and F. Yin,
Effects of Nb and C in solution and in NbC form on the transformation-
related internal friction of Fe-17Mn (mass%) alloys, Iron and Steel Institute
of Japan International, Vol. 48 (1), pp. 99-106, 2008, ISSN 0915-1559;
IMPACT FACTOR: 0.817
8,26
2.1.64 M.Susan, L.G.Bujoreanu, D.G.Gluc, C.Munteanu and M.Mantu,
On the drawing in ultrasonic field of metallic wires with high mechanical
resistance, Journal of Optoelectronics and Advanced Materials 7(2) April,
pp. 637-646, 2005, ISSN 1454-4164, IMPACT FACTOR: 1.138
9,55
2.1.65 M.Susan, L.G.Bujoreanu, D.G.Gluc, C.Munteanu and V.Iliescu,
Influence of relative deformation rate on tube processing by ultrasonic
vibration drawing, Revista de Metalurgia de Madrid 40(2), pp. 109-117,
2004, ISSN 0034-8570, IMPACT FACTOR: 0,798
8,19
2.1.66 D.Mihai and L.G.Bujoreanu, Mechanical properties degradation in
a Cr-Mo low-alloy steel pipe after prolonged use for gas transport in a
power plant station, Revista de Metalurgia de Madrid, 38(6), pp. 464-468,
2002, ISSN 0034-8570, IMPACT FACTOR: 0,131
13,81
2.1.67 L.G.Bujoreanu, M.L.Craus, S.Stanciu and V.Dia, Thermally and
stress induced changes in three phase structure of Cu-Zn-Al-Fe shape
memory alloy, Materials Science and Technology 16(June), pp. 612-616,
2000, ISSN 0267-0836, IMPACT FACTOR: 0,562
9,06
2.1.68 M.Susan and L.G.Bujoreanu, The metal-tool contact friction at the
ultrasonic vibration drawing of ball-bearing steel wires, Revista de
Metalurgia de Madrid 35(6), pp. 379-383, 1999, ISSN 0034-8570, IMPACT
FACTOR: 0,186
14,36
2.1.69 L.G.Bujoreanu, M.L.Craus, I.Rusu, S.Stanciu and D.Sutiman, On
the 2 to phase transformation in a Cu-Zn-Al based shape memory
alloy, Journal of Alloys and Compounds 278, pp. 190-193, 1998, ISSN
0925-8388, IMPACT FACTOR: 0,88
8,52
2.2 Articole n reviste i volumele unor
manifestri tiinifice indexate n alte baze de
Minim 5 pentru profesor/ CSI Reviste: 20/ nr. autori;
Volume: 10/nr. Autori,
-
13
date internaionale
245,36
[max. 3 articole/
manifestare]
2.2.1 E. Mihalache, B. Pricop, N.-M. Lohan, M.-G. Suru, B. Ozkal, L.-G.
Bujoreanu, Internal friction evaluation in mechanically alloyed-powder
metallurgy Fe-Mn-Si-Cr-Ni shape memory alloys, International Journal of
Modern Manufacturing Technologies, Vol. VIII, No. 1/ 2016, pp 61-68,
ISSN 20673604, http://modtech.ro/international-journal/international-
journal-ijmmt.php?volume=vol7no12015 indexed Scopus, INSPEC, Index
Copernicus, Google Scholar
3,33
2.2.2 Gheorghe Guru, Leandru G. Bujoreanu, Carmela Guru, Radu I.
Comneci, Nicoleta M. Lohan, Bogdan Pricop, Marius G. Suru, Superelastic-
like response obtained at Fe-Mn-Si-Cr shape memory alloys processed by
high-speed high pressure torsion, International Journal of Modern
Manufacturing Technologies, Vol. VII, No. 1, pp. 23-37, 2015, ISSN
20673604, http://modtech.ro/international-journal/international-journal-
ijmmt.php?volume=vol7no12015 indexed Scopus, INSPEC, Index
Copernicus, Google Scholar
2,85
2.2.3 Leandru-Gheorghe Bujoreanu, Nicoleta Monica Lohan, Bogdan
Pricop, Adrian-Liviu Paraschiv, Marius-Gabriel Suru, Nicanor Cimpoeu, Gigi
Vitel, Gheorghe Guru, Atomic migration variation as an effect of
thermomechanical cycling in shape memory actuators, Proceedings of the
International Conference on Shape Memory and Superelastic
Technologies, May 2024, 2013, Prague, Czech Republic, pp. 3-4
1,25
2.2.4 Nicoleta-Monica Lohan, Bogdan Pricop, Adrian-Liviu Paraschiv,
Marius-Gabriel Suru, Leandru-Gheorghe Bujoreanu, Cooling rate effects
on the structure and transformation behavior of Cu-Zn-Al shape memory
alloys subjected to differential scanning calorimetry analysis, Proceedings
of the International Conference on Shape Memory and Superelastic
Technologies, May 2024, 2013, Prague, Czech Republic, pp. 21-22
2
2.2.5 Adrian-Liviu Paraschiv, Marius-Gabriel Suru, Nicoleta Monica
Lohan, Bogdan Pricop, Leandru-Gheorghe Bujoreanu, Firua Borza,
Nicoleta Lupu, Factors influencing the structure and proprieties of
polycrystalline magnetic Fe-Ni-Co-Al-Ta-B shape memory alloys,
Proceedings of the International Conference on Shape Memory and
Superelastic Technologies, May 2024, 2013, Prague, Czech Republic,
pp. 27-28
1,42
2.2.6 Carmela Gurau, Gheorghe Gurau, Leandru-Gheorghe
Bujoreanu, High Pressure Torsion effects on Shape Memory behavior of
Fe-Mn-Si-Cr alloys, Proceedings of the International Conference on
Shape Memory and Superelastic Technologies, May 2024, 2013,
3,33
-
14
Prague, Czech Republic, pp. 65-66
2.2.7 A. Umut Soyler, Prof. Burak zkal, Leandru G. Bujoreanu, Effect
of Cold Deformation On the Microstructure and Transformation Properties of
Mechanical Alloyed Fe14Mn6Si9Cr5Ni Shape Memory Alloy,
Proceedings of the International Conference on Shape Memory and
Superelastic Technologies, May 2024, 2013, Prague, Czech Republic,
pp. 79-80
3,33
2.2.8 A. Umut Soyler, Prof. Burak zkal, Leandru G. Bujoreanu,
Sintering Densification and Microstructural Characterization of Mechanical
Alloyed Fe-Mn-Si based Powder Metal System, Proceedings of the
International Conference on Shape Memory and Superelastic
Technologies, May 2024, 2013, Prague, Czech Republic, pp. 81-82
3,33
2.2.9 Bogdan Pricop, Nicoleta Monica Lohan, Adrian-Liviu Paraschiv,
Marius-Gabriel Suru, Leandru-Gheorghe Bujoreanu, Burak zkal, Umut
Syler, Jan Van Humbeeck, Influence of mechanically alloyed fraction and
hot rolling temperature on the structure of Fe-14Mn-6Si-9Cr-5Ni (mass. %)
shape memory alloys processed by powder metallurgy, Proceedings of
the International Conference on Shape Memory and Superelastic
Technologies, May 2024, 2013, Prague, Czech Republic, pp. 85-86
1,25
2.2.10 Marius-Gabriel Suru, Adrian-Liviu Paraschiv, Nicoleta Monica
Lohan, Bogdan Pricop, Leandru-Gheorghe Bujoreanu, Burak Ozkal,
Loading mode and alloy system effects on surface relief characteristics of
martensite plates in Cu-based SMAs, Proceedings of the International
Conference on Shape Memory and Superelastic Technologies, May
2024, 2013, Prague, Czech Republic, pp. 366-367
1,66
2.2.11 Sergiu Stanciu, Leandru-Gheorghe Bujoreanu, Nicanor
Cimpoeu, Monica Nicoleta Lohan, Method for in situ observation of stress-
induced martensite formation and evolution in shape memory alloys,
Buletinul Institutului Politehnic Iai, tomul LIV(LVIII), fascicula 1,
Construcii de Maini, pp. 357-362, 2008, ISSN 1011-2855, indexat B+
CNCSIS, COPERNICUS
5
2.2.12 Leandru-Gheorghe Bujoreanu, Sergiu Stanciu, Monica Nicoleta
Lohan, Nicanor Cimpoeu, Ciprian Lohan, The role of stress-induced
martensite in Fe-Mn-Si shape memory behavior, Bul. Inst. Polit. Iai, t.
LIV(LVIII), f 1, Constr. Mas., pp.351-356, 2008, ISSN 1011-2855, indexat
B+ CNCSIS, COPERNICUS
4
2.2.13 Leandru-Gheorghe Bujoreanu, Viorica David, Vasile Dia,
Corneliu Munteanu, Evolution of the hysteretic behaviour of SMA wires
during mechanical and thermal cycling, Buletinul Institutului Politehnic
Iai, tom. LII(LVI), fasc. 6B, seciunea Constr. Mas., pp. 207-212, 2006,
5
-
15
ISSN 1011-2855, indexat B+ CNCSIS, COPERNICUS
2.2.14 Leandru-Gheorghe Bujoreanu, Romeu Chelariu, Costel Roman,
The effects of Nb additions on the thermomechanical behavior of Ni-Ti
shape memory alloy, Buletinul Institutului Politehnic Iai, tom.
LII(LVI), fasc. 6B, seciunea Constr. Mas., pp. 197-206, 2006, ISSN 1011-
2855, indexat B+ CNCSIS, COPERNICUS
6,66
2.2.15 L.G.Bujoreanu, S.Stanciu, I.Ioni, C.Munteanu and D.G.Gluc,
Effects of -phase preferred precipitation during the heating of a Cu-Zn-Al
shape memory alloy, Metalurgia International, X(2), pp. 3-10, 2005,
ISSN 1582-2214, indexat Engineering Village - Compendex
4
2.2.16 S. Stanciu, L.G.Bujoreanu, I.Ioni, D.G.Gluc and
C.Munteanu, Chemical composition effects on the thermal memory of -
type alloys, Metalurgia International, X(1), pp. 32-41, 2005, ISSN 1582-
2214
4
2.2.17 L.G.Bujoreanu, C.Munteanu and V.Dia, Thermomechanical
processing effects on the tensile pseudoelastic behaviour of a Cu-Zn-Al
shape memory alloy, Buletinul Institutului Politehnic Iai, tom. L(LIV),
fasc. 6B, s. Construcii de Maini, pp. 71-78, 2004, ISSN 1011-2855,
indexat B+ CNCSIS, COPERNICUS
6,66
2.2.18 L.G.Bujoreanu, S.Stanciu, C.Roman i J.Schrhoff, Caracterizarea
unui aliaj Cu-Al-Ni-Mn cu memoria formei. II Efectele solicitrilor
termomecanice (Characterization of a Cu-Al-Ni-Mn shape memory alloy. II
Effects of thermomechanical loads), Cercetri metalurgice i de noi
materiale (Metallurgy and New Materials Researches) XI(3), pp. 20-
31, 2003, ISSN 1221-5503, indexat EVISA
5
2.2.19 L.G.Bujoreanu i M.L.Craus, Influena deformrii plastice asupra
unor proprieti cu memoria formei (The influence of plastic deformation
upon some shape memory properties), Deformri plastice (Jou al of
Plastic Deformation) Vol. 5, Nr. 1(11), pp. 15-22, 2003, ISSN 1222-605X
10
2.2.20 L.G.Bujoreanu, R.Chelariu, I.Carcea i M.L.Craus, Caracterizarea
unui aliaj Cu-Al-Ni-Mn cu memoria formei. I Structura i morfologia fazic
(Characterization of a Cu-Al-Ni-Mn shape memory alloy. I Phasic structure
and morphology), Cercetri metalurgice i de noi materiale
(Metallurgy and New Materials Researches) XI(2), pp. 30-42, 2003,
ISSN 1221-5503, indexat EVISA
5
2.2.21 L. G. Bujoreanu, M.L.Craus, V.Dia and V.Plugaru, Response to
applied mechanical load of a multivariant martensitic Cu-Zn-Al-Fe shape
memory alloy, University Politehnica of Bucharest, Scientific Bulletin,
Series B: Chemistry and Materials Science, Vol. 64, Nr.3, pp. 59-68,
2002, ISSN 1454-2331, included in ZENTRALBLATT databases
5
-
16
2.2.22 D.Mihai i L.G.Bujoreanu, Accentuarea anizotropiei mecanice i
microstructurale a conductelor de abur din oel 15223 CSN, ca efect al
expunerilor ndelungate la presiuni i temperaturi ridicate (Enhancement of
mechanical and microstructural anisotropy of 15223 CSN steel steam pipes,
as an effect of long-lasting exposures to elevated pressures and
temperatures), Cercetri metalurgice i de noi materiale (Metallurgy
and New Materials Researches) X(2), pp. 25-36, 2002, ISSN 1221-
5503, indexat EVISA
10
2.2.23 L.G.Bujoreanu i M.L.Craus, Efectele metodei de deformare
plastic la cald asupra echilibrului dintre memoria termic i cea mecanic
(Hot working effects on the balance between thermal and mechanical
memory), Cercetri metalurgice i de noi materiale (Metallurgy and
New Materials Researches), pp. 24-35, 2002, X(1), ISSN 1221-5503,
indexat EVISA
10
2.2.24 D.Mihai i L.G.Bujoreanu, Modificri ale caracteristicilor mecanice
ale conductelor de abur, ca efect al expunerilor ndelungate la presiuni i
temperaturi ridicate (Changes of the mechanical characteristics of steam
pipes as an effect of long-lasting exposures to elevated pressures and
temperatures), Cercetri metalurgice i de noi materiale (Metallurgy
and New Materials Researches), IX(2), pp. 57-65, 2001, ISSN 1221-
5503, indexat EVISA
10
2.2.25 L.G.Bujoreanu, Variaia punctului critic As n timpul educrii
termomecanice i al ciclrii ulterioare prin efect de memoria formei n dublu
sens a unui aliaj cu memoria formei pe baz de Cu-Zn-Al, Metalurgia,
52(3), pp. 17-25, 2000, ISSN 0461-9579, indexat Engineering Village -
Compendex
20
2.2.26 L.G.Bujoreanu, Transformrile martensitei de clire, sub efectul
tensiunii aplicate, ntr-un aliaj superelastic Cu-Zn-Al, cu memoria formei,
Metalurgia, 51(8), pp. 64-69, 1999, ISSN 0461-9579, indexat Engineering
Village - Compendex
20
2.2.27 L.G.Bujoreanu, S.Stanciu, A.Dima V.Moldoveanu i L.Craus,
Studiul efectelor tratamentelor termice la un aliaj experimental Cu-Zn-Al cu
memoria formei: II Variaia structurii fazice (A study of heat treatment
effects in an experimental Cu-Zn-Al shape memory alloy: II. Variation of
phasic structure), Cercetri metalurgice i de noi materiale
(Metallurgy and New Materials Researches), VII(2), pp. 45-60, 1999,
ISSN 1221-5503, indexat EVISA
4
2.2.28 L.G.Bujoreanu, A.Dima, S.Stanciu, V.Moldoveanu i L.Zaharia,
Studiul efectelor tratamentelor termice la un aliaj experimental Cu-Zn-Al cu
memoria formei: I Variaia comportamentului pseudoelastic la traciune (A
4
-
17
study of heat treatment effects in an experimental Cu-Zn-Al shape memory
alloy: I. Variation of tensile pseudoelastic behaviour), Cercetri
metalurgice i de noi materiale (Metallurgy and New Materials
Researches), VII(1), pp. 57-67, 1999, ISSN 1221-5503, indexat EVISA
2.2.29 S.Stanciu, L.G.Bujoreanu, G.Calugaru si D.Vasiliu, Dependena
curbelor R-T de tehnologia de prelucrare a unui aliaj cu memoria formei Cu-
Al-Ni, Metalurgia, 50(9-10), pp. 59-63, 1998, ISSN 0461-9579, indexat
Engineering Village - Compendex
5
2.2.30 S.Stanciu, L.Bujoreanu, M.L.Craus, V.Dia i D.Rileanu, Cercetri
experimentale privind efectul deformrii plastice asupra martensitei din
aliajele cu memoria formei, Metalurgia, 50(7), 27-30, 1998, ISSN 0461-
9579, indexat Engineering Village - Compendex
4
2.2.31 V.Bulancea, L.G.Bujoreanu, A.Dima, S.Stanciu, V.Moldoveanu i
M.Temneanu Metod pentru producerea i educarea activatorilor electrici
dintr-un aliaj Cu-Zn-Al cu memoria formei (Method for producing and
training electrical actuators from an experimental Cu-Zn-Al shape memory
alloy), Cercetri metalurgice i de noi materiale (Metallurgy and New
Materials Researches, V(4), pp. 12-24), 1997, ISSN 1221-5503, indexat
EVISA
3,33
2.2.32 L.G.Bujoreanu, S.Stanciu, L.M.Craus i V.Dia, Studiul unui AMF
experimental de tip Cu-Zu-Al. Analiza metalografic optic, difractometric
i la traciune a efectelor produse de tratamentul termic secundar (II),
Metalurgia, 49(1), pp. 99-107, 1997, ISSN 0461-9579, indexat
Engineering Village - Compendex
5
2.2.33 L.G.Bujoreanu, L.M.Craus, S.Stanciu i V.Dia, Tempering effects
in a shape memory alloyed experimental brass, Metalurgia (English
version), II(1), pp. 5-10, 1997, ISSN 1582-2214, indexat Engineering
Village - Compendex
5
2.2.34 M.Susan, I.Mlureanu, L.G.Bujoreanu, P.Vizureanu i V.Dia,
Cercetri privind trefilarea srmelor din oeluri de rulmeni n cmp
ultrasonor. Partea a-II-a. Influena ultrasunetelor asupra forei de trefilare
pe seria de tragere i modificri ale caracteristicilor mecanice, Metalurgia,
48(10), pp. 69-70, 1996, ISSN 0461-9579, indexat Engineering Village -
Compendex
4
2.2.35 M.Susan, I.Mlureanu, L.G.Bujoreanu, P.Vizureanu, V.Solomon i
V.Dia, Cercetri privind trefilarea srmelor din oeluri de rulmeni n cmp
ultrasonor. Partea I. Gradul de reducere a forei medii de frecare la
contactul metal-scul (coeficientul ) i influena vitezei de tragere,
Metalurgia, 48(10), pp. 64-68, 1996, ISSN 0461-9579, indexat
Engineering Village - Compendex
6,33
-
18
2.2.36 L.G.Bujoreanu, S.Stanciu, L.M.Craus i V.Dia, Studiul unui AMF
experimental de tip Cu-Zu-Al. Analiza metalografic optic i
difractometric a efectelor produse de tratamentul termic primar (I),
Metalurgia, 48(8-9), pp. 84-91, 1996, ISSN 1453-1690, indexat
Engineering Village - Compendex
5
2.2.37 L.G.Bujoreanu, S.Stanciu, Carmen Pduraru, Lavina Teofan i
V.Dia, Dependena parametrilor de pseudoelasticitate din istoria mecanic i
termic a unei alame experimentale, cu memoria formei, Metalurgia,
48(8-9), pp. 59-66, 1996, ISSN 0461-9579, indexat Engineering Village -
Compendex
4
2.2.38 V.Dia, L.G.Bujoreanu i S.Stanciu, Pseudoelasticitate de
transformare si de maclare ntr-un aliaj cu memoria formei de tip Cu-Al-Ni
(Transformational and twinning pseudoelasticity in a Cu-Al-Ni shape
memory alloy), Cercetri metalurgice i de noi materiale (Metallurgy
and New Materials Researches, III(1), pp. 47-54, 1995, ISSN 1221-
5503, indexat EVISA
6,66
2.2.39 L.G.Bujoreanu, S.Stanciu i V.Dia, Formarea maclelor de tip II n
aliajele pseudoelastice, tip Cu-Al-Ni, cu memoria formei, Metalurgia, 47(9-
10), pp. 87-93, 1995, ISSN 0461-9579, indexat Engineering Village -
Compendex
6,66
2.2.40 S.Stanciu, L.G.Bujoreanu, G.Calugaru i V.Dia, Cercetri
experimentale privind obinerea aliajelor Cu-Al-Ni-Fe-Sn cu efect de
memoria formei, Metalurgia, 46(11-12), pp. 5-7, 1994, ISSN 0461-9579,
indexat Engineering Village - Compendex
5
2.2.41 L.G.Bujoreanu, S.Stanciu i V.Dia, Stabilizare i comportament
termomecanic ciclic, la un aliaj cu memoria formei, de tip Cu-Al-Ni,
Metalurgia, 46(10), pp. 47-50, 1994, ISSN 0461-9579, indexat
Engineering Village - Compendex
6,66
2.2.42 L.G.Bujoreanu, S.Stanciu i V.Dia, Efectul vitezei de deformare
asupra pseudoelasticitii de transformare la aliajele cu memoria formei,
Metalurgia, 46(10), pp. 38-46, 1994, ISSN 0461-9579, indexat
Engineering Village - Compendex
6,66
2.2.43 L.Bujoreanu, S.Stanciu i V.Dia, Comportament elastic al unui
aliaj Cu-Al-Ni, cu memoria formei, Metalurgia, 46(9), pp. 12-17, 1994,
ISSN 0461-9579, indexat Engineering Village - Compendex
6,66
2.2.44 I.Alexandru, M.Susan, C.Baciu, V.Bulancea, L.G.Bujoreanu and
Maria Baciu The influence of the ultrasonic field on the structural changes at
the hardening of ball-bearing steels, Buletinul Institutului Politehnic
Iai, tom. XXXVI (XL), fasc. 1-4, secia IV, Construcii de maini, pp.
149154, 1990, indexat B+ CNCSIS, COPERNICUS
3,33
-
19
Minim 2 pentru confereniar/ CSII
2.3 Brevete de invenie
47,73
25/ nr. autori (naional)
B.1. Leandru Gheorghe Bujoreanu, Gheorghe Gurau, Ioan Dan, Cristel Stirbu, Comaneci Radu Ioachim, Lohan Nicoleta Monica, Pricop Bogdan, Paraschiv Adrian Liviu, Suru Marius Gabriel, Gurau Carmela, Element muntifunctional cu deplasare axiala auto-adaptiva dintr-un aliaj Fe-Mn-Si-Cr cu memoria formei, Cerere de brevet de inventie RO 129876 A2, publicata la 28.11.2014 in BOPI nr. 11/ 2014,
2,5
B.2. Gurau Gheorghe, Bujoreanu Leandru Gheorghe, Potecasu Octavian, Cananau Nicolae, Alexandru Petrica, Gurau Carmela, Tanase Dinel, Procedeu si masina pentru deformarea prin torsiune la presiune inalta a elemetelor active cu forma tronconica din cu memoria formei, Cerere de brevet de inventie RO 129900 A2, publicata la 28.11.2014 in BOPI nr. 11/
2014, Derwent Primary Accession Number: 2015-10391H
3,57
B.3. Stanciu Sergiu i Bujoreanu Leandru-Gheorghe, Aliaj cu memoria formei Fe-Mn-Si-Ni-Cr si procedeu de obtinere, Brevet de inventie RO 127409, 04.10.2010
12,5
B.4. Stanciu Sergiu i Bujoreanu Leandru-Gheorghe, Cimpoesu Nicanor, Aliaj cu memoria formei Cu-Zn-Al-Ni si procedeu de obtinere, Brevet de inventie Patent no. RO126210, 14.09.2009
8,33
B.5. Stanciu Sergiu i Bujoreanu Leandru-Gheorghe, Aliaj Cu-Al-Ni-Fe-Sn cu memoria formei i procedeu de obinere a acestui aliaj, Brevet de invenie nr. 111855/ 1994, 28.02.1997
12,5
Stoica Mihai, Perju Costel i Bujoreanu Leandru, Cap revolver automat, Brevet de invenie.RO106352-B1, 30.04.93
8,33
2.4 Granturi/proiecte ctigate prin
competiie
200
2.4.1 Director/responsabil - Minim 3 pentru
Profesor/CS I dintre care cel puin unul ca
director; Minim 2 pentru Confereniar dintre
care la cel puin 1 director sau responsabil/
CS II
170
nationale 10 x ani desfurare
Nou metod de mbuntire a proprietilor de memoria formei prin
controlul migraiei atomice, Proiect de Cercetare Exploratorie, PN-II-ID-
PCE-2012-4-0033, Nr contract 13 din 02/09/2013, aflat in derulare din
2013, cu finalizare la 30.09.2016
Faza unica pe 2016: Evidentierea formarii reversibile a martensitei induse
prin tensiune in probele 40_MA, finantata cu 267.933 RON
Faza unica pe 2015: Evidentierea formarii reversibile a martensitei induse
prin tensiune in probele 30_MA, finantata cu 292.849 RON
40
-
20
Faza unica pe 2014: Evidentierea formarii reversibile a martensitei induse
prin tensiune in probele 10_MA si 20_MA, finantata cu 375.318 RON
Faza unica pe 2013: Evidentierea formarii reversibile a martensitei induse
prin tensiune in probele 0_MA, finantata cu 185.150 RON
Sistem modular de elemente multifunc-ionale cu deplasare auto-adaptiv,
Proiect Colaborativ de Cercetare Aplicativa, PN-II-PT-PCCA-2011-3.1-0174,
Nr contract 144 din 02/07/2012, aflat in derulare din 2012
Faza unica pe on 2016: Evaluarea impactului economic al aplicarii
rezultatelor cercetarii, finantata cu 247.670 RON
Faza unica pe 2015: Demonstrarea eficacitatii deplasarii auto-adaptive a
sistemului modular in conditii de fucntionare, finantata cu 217.978 RON
Faza unica pe 2014: Executia elementelor active multifunctionale pentru
sistemul modular, finantata cu 245.052 RON
Faza unica pe 2013: Conceperea, proiectarea si producerea elementelor
multifunctionale. Evaluarea efectului finisarii grauntilor asupra efectului de
memoria formei cu revenire retinuta, finantata cu 485.438 RON
Faza unica pe 2012: Obtinerea aliajelor cu granulatie ultrafina/
nanometrica si efect de memoria formei. Characterizarea probelor
preliminare, finantata cu 579.862 RON
50
Aplicatii cu revenire retinuta, ale aliajelor cu memoria formei pe baza de Fe-
(Mn, Ni)-Si, cu proprietati controlate prin modificari nanostructurale la
nivelul martensitei si matricei austenitice, contract nr. 279/ 01.10.2007, cod
CNCSIS 301,
Faza unic pe 2010: Obinerea i testarea elementelor de cuplare/fixare,
finanat cu 180.000 RON
Faza unic pe 2009: Stabilirea efectelor reducerii de seciune, stabilirea
variantei de tratament termic secundar i studiul efectelor acestora,
finanat cu 172.200 RON
Faza unic pe 2008: Stabilirea efectelor compoziiei chimice, stabilirea
variantei de tratament termic primar i studiul efectelor acesteia, finanat
cu 299.588 RON
Faza unic pe 2007: Elaborarea de noi aliaje pe baz de Fe-Ni i Fe-Mn,
finanat cu 75.000 RON
40
Grant CNCSIS de tip A, Dezvoltarea unui nou tip de microactuator controlat
prin computer din materiale compozite AMF/elastomer, cu memoria formei,
cod CNCSIS: 275/2007
Faza unic pe 2007: Testarea microactuatorului n condiii de laborator,
finanat cu 56.000 RON
Faza unic pe 2006: Obinerea materialului compozit AMF/ elastomer cu
memoria formei, finanat cu 82.000 RON
20
-
21
Grant CNCSIS de tip A, Studiul transformrilor induse termic sau mecanic,
pn la nivelul nanostructurii martensitice, n materialele multifuncionale
cu memoria formei. Aplicaii de tip senzor i actuator, cod CNCSIS
476/2004
Faz unic pe 2005: Testarea n condiii de laborator a elementelor
multufuncionale hidraulice i electrice obinute, finanat cu 40.000 RON
Faza unic pe 2004: Producerea i caracterizarea elementelor active, cu
memoria formei, punerea n form i testarea memoriei mecanice i
termice, Tema nr. 11 din Anexa Ia, finanat cu 20.000 RON;
Faza suplimentar pe 2004, Studiul precipitrii prefereniale a fazei n
structura martensitic multivariant indus termic, Tema 7 din Anexa Ia
adiional, finanat cu 6.000 RON
20
2.4.2 Membru n echipa
30
nationale 2 x ani desfurare
Noi aliaje cu memoria formei, tip beta, cu nanostructura modificata prin
aliere complexa si educare termomecanica, utilizate pentru aplicatii
robotice, contract nr. 279/ 01.10.2007, cod CNCSIS 616
Faza unic pe 2010: Verificarea comportamentului la oboseal
termomecanic a elementelor active, conceperea, proiectarea i realizarea
unei aplicaii robotice, finanat cu 195.360 RON
Faza unic pe 2009: Verificarea comportamentului la oboseal
termomecanic a elementelor active, conceperea, proiectarea i realizarea
unei aplicaii robotice, finanat cu 163.800 RON
Faza unic pe 2008: Stabilirea efectelor tratamentului termic primar, ale
deformrii plastice i ale ciclrii termomecanice, finanat cu 300.000 RON
Faza unic pe 2007: Obinerea unor probe turnate i tratate termic primar
din AMF de tip , finanat cu 78.000 RON
8
Concept inovativ de realizare n jet de plasm a straturilor dure cu
proprieti controlate, rezistente la uzur i coroziune, Proiect CEEX-M1,
Nr.67/ 2006
2
Sistem tehnologic performant pentru tragerea evilor inoxidabile n cmp
ultrasonor, Proiect CEEX-M1, Nr.293/ 13.09.2006
2
Structuri 2D i 3D din aliaje cu memoria formei biocompatibile
Proiect CEEX 25/ 2005
2
Influena modificatorilor asupra structurii, deformabilitii i caracteristicilor
de material cu memoria formei la aliaje din sistemul (Cu,Ni)-(Co,Mn)-
(Al,Ga,Sb), Programul Materiale noi, micro i nanotehnologii
MATNANTECH, proiect nr. 3020284, c.f. 159(302) 2003, beneficiar
2
-
22
Facultatea de Chimie Industrial-Universitatea Politehnica Bucureti, 2003-
2005, Subcontract S.C.RANCON S.R.L. Iai,
Tehnologii de supraaliere a stratului superficial al metalelor prin procese de
difuzie la nclzire n plasma electrolitic
Proiect CERES nr. 37/12.11.2002
finanat pe 2003 cu 366.192.000 ROL
finanat pe 2002 cu 18.180.000 ROL
4
Obinerea aliajelor (magnetice) cu memoria formei din sistemul (Cu, Ni)-
(Co, Mn)-(Al, Ga
Programul Materiale noi, micro i nanotehnologii MATNANTECH 2001,
colaborare cu Institutul Naional de Cercetare-Dezvoltare pentru Fizica
Tehnic Iai.
Faza II/2002: Corelaie ntre caracteristici fizico-mecanice, parametrii
tratamentului termomecanic i proprietile de aliaj cu memoria formei la
unele compoziii din sistemul (Cu, Ni)(Co, Mn)(Al, Ga)
Faza I/2001: Stabilirea stadiului actual de dezvoltare al aliajelor cu
memoria formei din sistemul (Cu, Ni)-(Co, Mn)-(Al, Ga).
4
Realizarea unor tehnologii moderne i performante de tratamente termice i
termochimice n plasm electrolitic, Proiect RELANSIN nr. 610/20.12.2001
finanat cu:
366.692.000 ROL 2003
68.500.000 ROL 2002
238.178.670 ROL 2001
6
3 Recunoaterea i
impactul activitii (A3)
1329,1
3.1 Citri n reviste ISI i BDI
395
Se exclud autocitrile; lucrri citate::articol
de revista, conferina, carte, teza, brevet
invenie
5/nr. autori pentru FI <
0.5; 10/nr. autori pentru
0.5 < = FI < 1; 15/nr.
autori pt. 1 < = FI < = 2 i
20/nr. autori pt. FI > 2.
3.1.1. A Study of Free Recovery in a Fe - Mn - Si - Cr Shape Memory Alloy
By:Spiridon, IP; Lohan, NM; Suru, MG; Mihalache, E; Bujoreanu, LG; Pricop, B
METAL SCIENCE AND HEAT TREATMENT Volume: 57 Issue: 9-10 Pages: 548-552, DOI: 10.1007/s11041-016-9920-z
Published: JAN 2016
3,33
1. Toward Design Principles for Diffusionless Transformations: The
Frustrated Formation of Co-Co Bonds in a Low-Temperature Polymorph of
GdCoSi2
By: Vinokir, Anastasiya I.; Fredrickson, Daniel C.
INORGANIC CHEMISTRY Volume: 55 Issue: 12 Pages: 6148-6160
Published: JUN 20 2016, IF = 4.82
3,33
-
23
3.1.2. Novel High-Speed High Pressure Torsion Technology for Obtaining Fe-Mn-Si-Cr Shape Memory Alloy Active
Elements
By:Gurau, G ; Gurau, C; Potecasu, O; Alexandru, P; Bujoreanu, LG, JOURNAL OF MATERIALS ENGINEERING AND
PERFORMANCE Volume: 23 Issue: 7 Pages: 2396-2402 Special Issue: SI DOI: 10.1007/s11665-014-1060-2 Published:
JUL 2014
2,4
1. Effects of HSHPT on the martensitic transformation behaviour of an NiTi
alloy
By:Gurau, C; Gurau, G; Sampath, V; Musat, V
Edited by:Schryvers, N; VanHumbeeck, J
ESOMAT 2015 - 10TH EUROPEAN SYMPOSIUM ON MARTENSITIC
TRANSFORMATIONS
Book Series: MATEC Web of Conferences
Volume: 33
Article Number: 03007
DOI: 10.1051/matecconf/20153303007
Published: 2015
0,6
2. Investigation of microhardness evolution in an ultrafine grained NiTi alloy
formed via high speed high pressure torsion (HSHPT)
By:Gurau, G; Gurau, C; Sampath, V
Edited by:Schryvers, N; VanHumbeeck, J
ESOMAT 2015 - 10TH EUROPEAN SYMPOSIUM ON MARTENSITIC
TRANSFORMATIONS
Book Series: MATEC Web of Conferences
Volume: 33
Article Number: 03003
DOI: 10.1051/matecconf/20153303003
Published: 2015
0,6
3. Magnetic and Martensitic Transformations in the bulk and melt spun
ribbons of Ni57-xNdxFe18Ga25 Ferromagnetic Shape Memory Alloys
By:Tolea, F; Crisan, AD; Sofronie, M; Tolea, M; Valeanu, M
MATERIALS TODAY-PROCEEDINGS
Volume: 2 Pages: 875-878 Supplement: 3
DOI: 10.1016/j.matpr.2015.07.421
Published: 2015
0,6
4. A COMPARISON OF THE STRUCTURE AND PROPERTIES OF HSLA STEEL
COLD ROLLED AND SEVERE PLASTIC DEFORMED BY HIGH SPEED HIGH
PRESSURE TORSION
By:Gurau, G (Gurau, Gheorghe)[ 1 ] ; Alexandru, P (Alexandru, Petrica)[ 1
] ; Musat, V (Musat, Viorica)[ 1 ] ; Gurau, L (Gurau, Liviu)[ 1 ]
Book Group Author(s):SGEM
GEOCONFERENCE ON NANO, BIO AND GREEN - TECHNOLOGIES FOR
0,6
-
24
A SUSTAINABLE FUTURE, VOL I (SGEM 2014)
Book Series: International Multidisciplinary Scientific GeoConference-SGEM
Pages: 3-10
Published: 2014
3.1.3 An experimental study on the response of equal channel angular pressed aluminium subjected to cold rolling
By: Gurau, G; Gurau, C; Braz-Fernandes, FM; Bujoreanu, L. G.
View ResearcherID and ORCID
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES
Volume: 21 Issue: 3 Pages: 253-258 Special Issue: SI
Published: JUN 2014
1,25
1. Combining circular-to-rectangular direct extrusion and equal channel
angular pressing: Analysis and simulation
By: Comaneci, R.; Zaharia, L.; Nedelcu, D.
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES
Volume: 22 Issue: 5 Pages: 527-533 Published: OCT 2015, IF = 0.456
1,25
3.1.4 On some structural characteristics of Fe-base shape memory alloys
By:Paraschiv, AL; Borza, F; Lupu, N; Suru, MG; Lohan, NM; Pricop, B; Spiridon, IP; Bujoreanu, LG
View ResearcherID and ORCID
JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS
Volume: 15 Issue: 7-8 Pages: 781-784
Published: JUL-AUG 2013
2,5
1. Tailoring the magnetic properties of new Fe-Ni-Co-Al-(Ta,Nb)-B
superelastic rapidly quenched microwires By: Borza, F.; Lupu, N.; Dobrea,
V.; et al. JOURNAL OF APPLIED PHYSICS Volume: 117 Issue: 17
Article Number: 17E512 Published: MAY 7 2015, IF = 2.101
2,5
3.1.5 Influence of temperature variation rate on calorimetric response during heating and on martensite structure obtained
after subsequent cooling of Cu-Zn-Al shape memory alloy
By: Lohan, N. M.; Bujoreanu, L-G.; Baciu, C.
MICRO & NANO LETTERS Volume: 7 Issue: 6 Pages: 540-543 Published: JUN 2012
9,34
1. Study of microindentation and differential scanning calorimetry of
reinforced polyamide By: Mindru, Teodor Daniel; Nedelcu, Dumitru INDIAN
JOURNAL OF ENGINEERING AND MATERIALS SCIENCES Volume: 21
Issue: 3 Special Issue: SI Pages: 333-340 Published: JUN 2014, IF =
0.456
1,67
2. CONSIDERATIONS ON THE MICRO-INDENTATION AND DIFFERENTIAL
SCANNING CALORIMETRY OF ARBOFORM REINFORCED WITH ARAMID
FIBRES By: Plavanescu, Simona; Nedelcu, Dumitru; Lohan, Monica Nicoleta
Edited by: Carausu, C; Cohal, V; Doroftei, I; et al. Conference: ModTech
International Conference - Modern Technologies in Industrial Engineering
Location: Profess Assoc Modern Mfg Technol, Sinaia, ROMANIA Date: JUN
1
-
25
27-29, 2013 Sponsor(s): Silesian Univ Technol; Maritime Univ Constanta
MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING Book
Series: Advanced Materials Research Volume: 837 Pages: 718-723
Published: 2014
3. Microindentation and differential scanning calorimetry of "liquid wood",
By: Nedelcu, Dumitru; Ciofu, Ciprian; Lohan, Nicoleta Monica
COMPOSITES PART B-ENGINEERING Volume: 55 Pages: 11-15
Published: DEC 2013, IF = 3.85
6,67
3.1.6 On role of atomic migration in amnesia occurrence during complex thermal cycling of Cu-Zn-Al shape memory alloy
By:Bujoreanu, LG; Lohan, NM; Pricop, B ; Cimpoesu, N.
View ResearcherID and ORCID
MATERIALS SCIENCE AND TECHNOLOGY
Volume: 28 Issue: 6 Pages: 658-667
DOI: 10.1179/1743284711Y.0000000099
Published: JUN 2012
0,75
1. NiTi Shape Memory Alloy Active Element Behavior in Long Time
Solicitation Conditions
By: Ursanu (Dragos), Adela; Stanciu, Sergiu; Cimpoesu, Ramona; et al.
Edited by: Slatineanu, L; Merticaru, V; Nagit, G; et al.
Conference: Innovative Manufacturing Engineering Conference (IManE)
Location: Chisinau, MOLDOVA Date: MAY 29-30, 2014
Sponsor(s): TCM Iasi, Asociatia Studentilor Absolventilor; Unitrade
Lubricants SRL; Acad Sci Moldova
ENGINEERING SOLUTIONS AND TECHNOLOGIES IN MANUFACTURING
Book Series: Applied Mechanics and Materials Volume: 657 Pages:
387-391 Published: 2014
0,75
3.1.7 Structural Effects of Training Cycles in Shape Memory Actuators for Temperature Control
By:Vitel, G; Suru, MG; Paraschiv, AL; Lohan, NM; Pricop, B; Baciu, M; Bujoreanu, LG
MATERIALS AND MANUFACTURING PROCESSES
Volume: 28 Issue: 1 Pages: 79-84
DOI: 10.1080/10426914.2012.700157
Published: 2012
4,99
1. Effect of Rapid Solidification on the Microstructure and Magnetic-Field-
Induced Strain of Co1.36Ni1.21AlFe0.12
By: Ju, Jia; Xue, Feng; Sun, Liuxia
MATERIALS AND MANUFACTURING PROCESSES Volume: 30 Issue:
5 Pages: 637-643 Published: MAY 4 2015, IF = 1.419
2,14
2. Microstructure and mechanical properties change by rare earth Dy added
in as-cast Co-Ni-Al ferromagnetic shape memory alloys
By: Ju, Jia; Xue, Feng; Zhou, Jian; et al.
2,85
-
26
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS
PROPERTIES MICROSTRUCTURE AND PROCESSING Volume: 616 Pages:
196-200 Published: OCT 20 2014, IF = 2.647
3.1.8 Tempering effects in a normalized hot forged Cu-Zn-Al shape memory alloy
By:Vitel, G; Paraschiv, AL; Suru, MG; Cimpoesu, N; Bujoreanu, LG
View ResearcherID and ORCID
OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS
Volume: 6 Issue: 1-2 Pages: 339-342
Published: JAN-FEB 2012
6
1. Effects of solution heat treatment on microstructure and mechanical
properties of Mg-3Al-1Si-0.3Mn-xSr alloy
By: Wang, Baogang; Wang, Xu; Zhou, Jixue; et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL
MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Volume: 618 Pages: 210-218 Published: NOV 17 2014, IF = 2.647
4
2. Modification effects of as cast Mg-Al-Si magnesium alloy with strontium
By: Wang Baogang; Wang Xu; Zhou Jixue; et al.
OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID
COMMUNICATIONS Volume: 8 Issue: 1-2 Pages: 63-67 Published:
JAN-FEB 2014, IF = 0.412
1
3. Chemical and micro-structural characterization of a copper based shape
memory alloy
By: Cimpoesu, I.; Stanciu, S.; Cimpoesu, N.; et al.
JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS
Volume: 15 Issue: 11-12 Pages: 1392-1398 Published: NOV-DEC 2013,
IF = 0.383
1
3.1.9 Heating rate effects on reverse martensitic transformation in a Cu-Zn-Al shape memory alloy
By:Lohan, NM; Pricop, B; Bujoreanu, LG; Cimpoesu, N
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH
Volume: 102 Issue: 11 Pages: 1345-1351
DOI: 10.3139/146.110595
Published: NOV 2011
14,75
1. Preliminary Results on Pulsed Laser Deposition of PMMA on Nitinol
Substrate
By: Gradinaru, Irina; Timofte, Daniel; Vasincu, Decebal; et al.
MATERIALE PLASTICE Volume: 51 Issue: 3 Pages: 230-234
Published: SEP 2014, IF = 0.903
2,5
2. NiTi Shape Memory Alloy Active Element Behavior in Long Time
Solicitation Conditions
By: Ursanu (Dragos), Adela; Stanciu, Sergiu; Cimpoesu, Ramona; et al.
0,75
-
27
Edited by: Slatineanu, L; Merticaru, V; Nagit, G; et al.
Conference: Innovative Manufacturing Engineering Conference (IManE)
Location: Chisinau, MOLDOVA Date: MAY 29-30, 2014
Sponsor(s): TCM Iasi, Asociatia Studentilor Absolventilor; Unitrade
Lubricants SRL; Acad Sci Moldova
ENGINEERING SOLUTIONS AND TECHNOLOGIES IN MANUFACTURING
Book Series: Applied Mechanics and Materials Volume: 657 Pages:
387-391 Published: 2014
3. CONSIDERATIONS ON THE MICRO-INDENTATION AND DIFFERENTIAL
SCANNING CALORIMETRY OF ARBOFORM REINFORCED WITH ARAMID
FIBRES
By: Plavanescu, Simona; Nedelcu, Dumitru; Lohan, Monica Nicoleta
Edited by: Carausu, C; Cohal, V; Doroftei, I; et al.
Conference: ModTech International Conference - Modern Technologies in
Industrial Engineering Location: Profess Assoc Modern Mfg Technol, Sinaia,
ROMANIA Date: JUN 27-29, 2013
Sponsor(s): Silesian Univ Technol; Maritime Univ Constanta
MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING Book Series:
Advanced Materials Research Volume: 837 Pages: 718-723
Published: 2014
0,75
4. On The Structure of Shape Memory Alloys
By: Acitei, Dragos Cristian; Sandu, Andrei Victor; Abdullah, Mohd Mustafa
Al Bakri; et al.
Edited by: Abdullah, MMA; Jamaludin, L; Abdullah, A; et al.
Conference: International Conference on Advanced Materials Engineering
and Technology (ICAMET 2013) Location: Bandung, INDONESIA Date: NOV
28-29, 2013
Sponsor(s): Ctr Excellence Geopolymer & Green Technol; Univ Malaysia
Perlis, Sch Mat Engn
ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY II Book
Series: Key Engineering Materials Volume: 594-595 Pages: 140-145
Published: 2014
0,75
5. OBTAINING SHAPE MEMORY ALLOY THIN LAYER USING PLD TECHNIQUE
By:Cimpoesu, N (Cimpoesu, N.)[ 1 ] ; Stanciu, S (Stanciu, S.)[ 1 ] ;
Vizureanu, P (Vizureanu, P.)[ 1 ] ; Cimpoesu, R (Cimpoesu, R.)[ 1 ] ;
Achitei, DC (Achitei, D. Cristian)[ 1 ] ; Ionita, I (Ionita, I.)[ 1 ]
View ResearcherID and ORCID
JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY
Volume: 50 Issue: 1 Pages: 69-76
DOI: 10.2298/JMMB121206010C
Published: 2014, IF = 1.239
3,75
-
28
6. MICROSTRUCTURAL AND PHASE ANALYSIS OF CuAlNi SHAPE-MEMORY
ALLOY AFTER CONTINUOUS CASTING
By: Gojic, Mirko; Kozuh, Stjepan; Anzel, Ivan; et al.
MATERIALI IN TEHNOLOGIJE Volume: 47 Issue: 2 Pages: 149-152
Published: MAR-APR 2013, IF = 1.008
3,75
7. Thermo-elastic response of a NiTi SMA at compression solicitation
By: Cimpoesu, I.; Stanciu, S.; Goanta, V.; et al.
OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID
COMMUNICATIONS Volume: 6 Issue: 5-6 Pages: 627-630
Published: MAY-JUN 2012, IF = 0.412
1,25
8. ANALYSIS OF ALLOYS BEHAVIOR BY MOLDING SIMULATION POINT OF
VIEW
By: Stefan, Mihai; Mihai, Dumitru
METALURGIA INTERNATIONAL Volume: 17 Issue: 3 Pages: 38-42
Published: 2012, IF = 0.134
1,25
3.1.10 New calorimetric-structural aspects of temperature memory effect in hot rolled Cu-Zn-Al SMAs
By:Vitel, G; Paraschiv, AL; Suru, MG; Cimpoesu, N; Bujoreanu, LG
OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS
Volume: 5 Issue: 8 Pages: 858-862
Published: AUG 2011
2
1. Chemical and micro-structural characterization of a copper based shape
memory alloy
By: Cimpoesu, I.; Stanciu, S.; Cimpoesu, N.; et al.
JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS
Volume: 15 Issue: 11-12 Pages: 1392-1398 Published: NOV-DEC 2013,
IF = 0.383
1
2. Thermo-elastic response of a NiTi SMA at compression solicitation
By: Cimpoesu, I.; Stanciu, S.; Goanta, V.; et al.
OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID
COMMUNICATIONS Volume: 6 Issue: 5-6 Pages: 627-630
Published: MAY-JUN 2012, IF = 0.412
1
3.1.11 Mechanical alloying effects on the thermal behaviour of a Fe-Mn-Si-Cr-Ni shape memory alloy under powder form
By:Pricop, B; Soyler, U; Lohan, NM; Ozkal, B; Chicet, D; David, A; Bujoreanu, LG
OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS
Volume: 5 Issue: 5-6 Pages: 555-561
Published: MAY 2011
0,42
1. A Potential Biodegradable Metallic Material with Shape Memory Effect
Based on Iron
By: Ratoi, Mihaela; Stanciu, Sergiu; Cimpoesu, Nicanor; et al.
Edited by: Murariu, AC
0,42
-
29
Conference: 10th International Conference on Structural Integrity of
Welded Structures (ISCS13) Location: Timisoara, ROMANIA Date: JUL 11-
12, 2013
Sponsor(s): CM Metal Trading SRL; Robcon TM SRL; Kimet SRL
STRUCTURAL INTEGRITY OF WELDED STRUCTURES Book Series:
Advanced Materials Research Volume: 814 Pages: 110-114
Published: 2013
3.1.12 Thermal Memory Degradation in a Cu-Zn-Al Shape Memory Alloy During Thermal Cycling with Free Air Cooling
By:Bujoreanu LG; Lohan, NM; Pricop, B; Cimpoesu, N
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
Volume: 20 Issue: 3 Pages: 468-475
DOI: 10.1007/s11665-010-9702-5
Published: APR 2011
14,75
1. On The Fatigue of Shape Memory Alloys
By:Achitei, DC; Abdullah, MMA; Sandu, AV ; Vizureanu, P; Abdullah, A
Edited by:Abdullah, MMA; Jamaludin, L; Abdullah, A; AbdRazak, R; Hussin,
K
View ResearcherID and ORCID
ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY II
Book Series: Key Engineering Materials
Volume: 594-595 Pages: 133-139
DOI: 10.4028/www.scientific.net/KEM.594-595.133
Published: 2014
0,75
2. On The Structure of Shape Memory Alloys
By:Acitei, DC; Sandu, AV; Abdullah, MMA; Vizureanu, P; Abdullah, A
Edited by:Abdullah, MMA; Jamaludin, L; Abdullah, A; AbdRazak, R; Hussin,
K
View ResearcherID and ORCID
ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY II
Book Series: Key Engineering Materials
Volume: 594-595 Pages: 140-145
DOI: 10.4028/www.scientific.net/KEM.594-595.140
Published: 2014
0,75
3. OBTAINING SHAPE MEMORY ALLOY THIN LAYER USING PLD TECHNIQUE
By:Cimpoesu, N; Stanciu, S; Vizureanu, P; Cimpoesu, R; Achitei, DC;
Ionita, I
JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY
Volume: 50 Issue: 1 Pages: 69-76
DOI: 10.2298/JMMB121206010C
Published: 2014, IF = 1.239
3,75
-
30
4. Chemical and micro-structural characterization of a copper based shape
memory alloy
By:Cimpoesu, I; Stanciu, S; Cimpoesu, N; Munteanu, C; Istrate, B; Dragos,
AU; Dana, D; Alexandru, A; Nejneru, C
View ResearcherID and ORCID
JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS
Volume: 15 Issue: 11-12 Pages: 1392-1398, IF = 0.383
Published: NOV-DEC 2013, IF = 0.383
1,25
5. Preliminary Results of Copper Based Shape Memory Alloys Analysis used
for MEMS Applications
By: Cimpoesu, N; Ursanu, AD; Stanciu, S; Cimpoesu, R; Constantin, B;
Paraschiv, C; Gurlui, SO
Edited by:DesPerrieres, OD; Mazuru, S; Slatineanu, L
Conference: 17th International Conference on Innovative Manufacturing
Engineering Location: Iasi, ROMANIA Date: MAY 23-24, 2013
Sponsor(s): Asociatia Studentilor Absolventilor TCM Iasi; Delcam Romania;
Delphi Diesel Systems Romania; Unitrade Lubricants SRL; SC Bras SRL,
Dealer Renault; SC Moldotrans Auto SRL,Dealer Seat; SC Doly SRL, Dealter
Suzuki; SC Caremil Impex SRL, Dealer Dacia; SC Caremil Impex SRL,
Dealer Nissan; SC Ande Motors SRL, Dealer Opel; SC Open Serv SRL,
Dealer Skoda
INNOVATIVE MANUFACTURING ENGINEERING Book Series: Applied
Mechanics and Materials Volume: 371 Pages: 368-372 Published:
2013
0,75
6. Thermo-elastic response of a NiTi SMA at compression solicitation
By:Cimpoesu, I; Stanciu, S; Goanta, V; Achitei, DC; Lohan, NM;
Constantin, B (Constantin, B.
OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID
COMMUNICATIONS
Volume: 6 Issue: 5-6 Pages: 627-630
Published: MAY-JUN 2012, IF = 0.412
1,25
7. Hydroxyapatite and PMMA Thin Films Synthesized by Pulsed Laser
Deposition on Titanium Based Metallic Substrates
By:Costan, A; Cimpoesu, RH; Ionita, I; Dima, A; Forna, N; Nica, P; Agop, M
View ResearcherID and ORCID
MATERIALE PLASTICE
Volume: 48 Issue: 4 Pages: 299-302
Published: DEC 2011, IF = 0,903
2,5
8. Biodegradable hydroxyapatite layer obtained on Ti-6Al-4V alloy dental
implant material
By:Costan, A; Forna, N; Dima, A; Andronache, M; Roman, C; Manole, V;
1,25
-
31
Stratulat, L; Agop, M
View ResearcherID and ORCID
JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS
Volume: 13 Issue: 9-10 Pages: 1338-1341
Published: SEP-OCT 2011, IF = 0.383
9. Thermal properties of a Ti-6Al-4V alloy used as dental implant material
By:Costan, A; Dima, A; Ionita, I,; Forna, N; Perju, MC; Agop, M
OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID
COMMUNICATIONS
Volume: 5 Issue: 1-2 Pages: 92-95
Published: JAN 2011, IF = 0.412
1,25
10. Electrical behavior of a smart Nitinol spring under full time constrain
By:Cimpoesu, N; Stanciu, S ; Doroftei, I; Ionita, I; Radu, V; Paraschiv, P
View ResearcherID and ORCID
OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID
COMMUNICATIONS
Volume: 4 Issue: 12 Pages: 2028-2031
Published: DEC 2010, IF = 0.412
1,25
3.1.13 Variation tendencies of tensile constrained recovery behaviour and associated structural changes during thermal
cycling of a Fe-Mn-Si-Cr-Ni shape memory alloy
By:Lohan, C; Pricop, B; Comaneci, RI; Cimpoesu, N; Bujoreanu, LG
View ResearcherID and ORCID
OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS
Volume: 4 Issue: 6 Pages: 816-820
Published: JUN 2010
2,6
1. A Potential Biodegradable Metallic Material with Shape Memory Effect
Based on Iron
By: Ratoi, Mihaela; Stanciu, Sergiu; Cimpoesu, Nicanor; et al.
Edited by: Murariu, AC
Conference: 10th International Conference on Structural Integrity of
Welded Structures (ISCS13) Location: Timisoara, ROMANIA Date: JUL 11-
12, 2013
Sponsor(s): CM Metal Trading SRL; Robcon TM SRL; Kimet SRL
STRUCTURAL INTEGRITY OF WELDED STRUCTURES Book Series:
Advanced Materials Research Volume: 814 Pages: 110-114
Published: 2013
0,6
2. QUANTITATIVE DETERMINING OF Cu, Ag, Au AND Pt FROM ELECTRICAL
AND ELECTRONIC WASTE
By: Degeratu, Danut
METALURGIA INTERNATIONAL Volume: 17 Issue: 1 Pages: 72-77
1
-
32
Published: 2012, IF = 0.134
3. THE DETERMINATION OF SPORTS FAN ATTITUDE USING MARKETING
RESEARCH
By: Paraschiv, Ciprian Constantin
METALURGIA INTERNATIONAL Volume: 16 Issue: 12 Pages: 83-86
Published: 2011, IF = 0.134
1
3.1.14 Influence of heat treatment and microstructure on the tensile pseudoelastic response of an Ni-rich NiTi shape
memory alloy
By:Bujoreanu, LG ; Young, ML; Gollerthan, S Somsen, C; Eggeler, G
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH
Volume: 101 Issue: 5 Pages: 623-630
DOI: 10.3139/146.110317
Published: MAY 2010
7
1. Strain mapping of crack extension in pseudoelastic NiTi shape memory
alloys during static loading By: Young, M. L.; Gollerthan, S.; Baruj, A.; et
al. ACTA MATERIALIA Volume: 61 Issue: 15 Pages: 5800-5806
Published: SEP 2013, IF = 5.058
4
2. Stress-Induced Martensite in Front of Crack Tips in NiTi Shape Memory
Alloys: Modeling Versus Experiments
By: Maletta, C.; Young, M. L.
Conference: International Conference on Shape Memory and Superelastic
Technologies Location: Pacific Grove, CA Date: 2010
Sponsor(s): Int Org Shape Memory & Superelastic Technolog
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE Volume:
20 Issue: 4-5 Special Issue: SI Pages: 597-604 Published: JUL 2011,
IF = 1.094
3
3.1.15 Mechanical cycling effects at Fe-Mn-Si-Cr-Ni SMAs obtained by powder metallurgy
By: Pricop, B; Soyler, U; Comaneci, RI; Ozkal, B; Bujoreanu, LG
Edited by:Kohl, M; Chernenko, V
View ResearcherID and ORCID
3RD INTERNATIONAL SYMPOSIUM ON SHAPE MEMORY MATERIALS FOR SMART SYSTEMS/E-MRS 2010 SPRING MEETING
Book Series: Physics Procedia
Volume: 10 Pages: 125-131
DOI: 10.1016/j.phpro.2010.11.087
Published: 2010
4
1. Phase transformation during mechano-synthesis of
nanocrystalline/amorphous Fe-32Mn-6Si alloys
By: Amini, Rasool; Shamsipoor, Ali; Ghaffari, Mohammad; et al.
MATERIALS CHARACTERIZATION Volume: 84 Pages: 169-174
Published: OCT 2013, IF = 2.383
4
-
33
3.1.16 FORMATION OF TRANSITORY BAINITE AS A PRECURSOR OF alpha-PHASE DURING TEMPERING OF MARTENSITIC
CU-ZN-AL SMAs
By: Bujoreanu, Leandru-Gheorghe
Edited by: Chen, HR
SHAPE MEMORY ALLOYS: MANUFACTURE, PROPERTIES AND APPLICATIONS Book Series: Materials Science and
Technologies Pages: 267-285 Published: 2010
23
1. Optimum stacking in a multiply laminate used for the skin of adaptive
wings
By: Niculita, C.; Vlase, S.; Bencze, A.; et al.
OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID
COMMUNICATIONS Volume: 5 Issue: 11 Pages: 1233-1236
Published: NOV 2011, IF =
0.412
5
2. EXPERIMENTAL RESEARCH ON THE SEWABILITY OF FERROMAGNETIC
MICRO-WIRES
By: Loghin, Carmen; Ursache, Mariana; Ionescu, Irina
TEKSTIL VE KONFEKSIYON Volume: 20 Issue: 4 Pages: 373-378
Published: OCT-DEC 2010, IF = 0.287
5
3. COMPUTER ASSISTED MICROACTUATOR MADE FROM SMA/ELASTOMER
COMPOSITE
By: Temneanu, Mitica
METALURGIA INTERNATIONAL Volume: 15 Issue: 10 Special Issue:
SI Pages: 19-23 Published: 2009, IF = 0.134
5
4. EXPERIMENTAL RESEARCH REGARDING MAGNETORHEOLOGIC FLUIDS
APPLIED IN FLUID BASED BRAKE SYSTEM
By: Socaciu, T.; Bucur, M.; Simon, M.
METALURGIA INTERNATIONAL Volume: 14 Special Issue: 3 Pages:
29-32 Published: 2009, IF = 0.134
5
5. AIRCRAFT PERFORMANCE IMPROVEMENTS BY USING NEW CONCEPT OF
ADAPTIVE WING
By: Niculita, Camelia; Candea, Ioan; Bencze, Andrei
Edited by: Nedelcu, D; Slatineanu, L; Mazuru, S
Conference: 13th International Conference on Modern Technologies, Quality
and Innovation (ModTech 2009) Location: Iasi, ROMANIA Date: MAY 21-23,
2009
Sponsor(s): TCM Dept Machine Mfg Technol, Iasi; TCM Dept, Chisinau;
Redesign; Toyota Iasi; MOL; Shell; URB; Wintech; Electrocons;
TEHNOTON
PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE
MODERN TECHNOLOGIES, QUALITY AND INNOVATION: MODTECH 2009 -
3
-
34
NEW FACE OF TMCR Book Series: Proceedings of the International
Conference ModTech Pages: 459-462 Published: 2009
3.1.17 Factors Influencing the Reversion of Stress-induced Martensite to Austenite in a Fe-Mn-Si-Cr-Ni Shape Memory
Alloy
By:Bujoreanu, LG; Stanciu, S; Comaneci, RI ; Meyer, M; Dia, V; Lohan, C
View ResearcherID and ORCID
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
Volume: 18 Issue: 5-6 Pages: 500-505
DOI: 10.1007/s11665-009-9499-2
Published: AUG 2009
2,16
1. A Potential Biodegradable Metallic Material with Shape Memory Effect
Based on Iron
By: Ratoi, Mihaela; Stanciu, Sergiu; Cimpoesu, Nicanor; et al.
Edited by: Murariu, AC
Conference: 10th International Conference on Structural Integrity of
Welded Structures (ISCS13) Location: Timisoara, ROMANIA Date: JUL 11-
12, 2013
Sponsor(s): CM Metal Trading SRL; Robcon TM SRL; Kimet SRL
STRUCTURAL INTEGRITY OF WELDED STRUCTURES Book Series:
Advanced Materials Research Volume: 814 Pages: 110-114
Published: 2013
0,5
2. The applications and research progresses of nickel-titanium shape
memory alloy in reconstructive surgery
By: Li, Qiang; Zeng, Yanjun; Tang, Xiaoying
AUSTRALASIAN PHYSICAL & ENGINEERING SCIENCES IN MEDICINE
Volume: 33 Issue: 2 Pages: 129-136 Published: JUN 2010, IF =
0.676
1,33
3. THE ROLE OF MARTENSITIC TRANSFORMATION IN THE INTERPHASE
BOUNDARY TYPE HIGH-DAMPING MATERIALS
By: Moldoveanu, Vasile-Viorel
METALURGIA INTERNATIONAL Volume: 15 Issue: 5 Pages: 18-21
Published: 2010, IF = 0.134
0,83
4. Mechanical Evaluation of Heavily Drawn Fe-10Ni-7Mn (wt %) Martensitic
Steel: Pseudoelastic Behavior
By: Ghasemi-Nanesa, H.; Nili-Ahmadabad, M.; Shirazi, H.; et al.
Book Group Author(s): TMS
Conference: TMS 2010 Annual Meeting Supplemental Proceedings on
Materials Processing and Properties Location: Seattle, WA Date: FEB 14-18,
2010
TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL
0,5
-
35
PROCEEDINGS, VOL 2: MATERIALS CHARACTERIZATION,
COMPUTATION AND MODELING AND ENERGY Pages: 749-755
Published: 2010
3.1.18 Shape memory effect and related characteristics of helical springs made from Cu-Al-Ni alloy by investment casting
By: Stanciu, S; Bujoreanu, LG; Cimpoesu, N; Ionita, I; Moldoveanu, V
OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS Volume: 3 Issue: 6 Pages: 581-585
Published: JUN 2009
1
1. Electrical behavior of a smart Nitinol spring under full time constrain
By: Cimpoesu, N.; Stanciu, S.; Doroftei, I.; et al.
OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID
COMMUNICATIONS Volume: 4 Issue: 12 Pages: 2028-2031
Published: DEC 2010, IF = 0,412
1
3.1.19 Study of the transitory formation of alpha(1) bainite, as a precursor of alpha-phase in tempered SMAs
By:Bujoreanu, LG; Stanciu, S; Barsanescu, P; Lohan, NM
Edited by:Schiopu, P; Panait, C; Caruntu, G; Manea, A
View ResearcherID and ORCID
ADVANCED TOPICS IN OPTOELECTRONICS, MICROELECTRONICS, AND NANOTECHNOLOGIES IV
Book Series: Proceedings of SPIE-The International Society for Optical Engineering
Volume: 7297
Article Number: 72970B
DOI: 10.1117/12.823620
Published: 2009
5
1. Ag-rich precipitates formation in the Cu-11%Al-10%Mn-3%Ag alloy
By: Silva, R. A. G.; Paganotti, A.; Jabase, L.; et al.
JOURNAL OF ALLOYS AND COMPOUNDS Volume: 615 Supplement: 1
Pages: S160-S162 Published: DEC 5 2014, IF = 3.014
5
3.1.20 Comparative study of the structures of Fe-Mn-Si-Cr-Ni shape memory alloys obtained by classical and by powder
metallurgy, respectively
By:Bujoreanu, LG; Stanciu, S; Ozkal, B; Comaneci, RI; Meyer, M
Edited by:Sittner, P; Paidar, V; Heller, L; Seiner, H
View ResearcherID and ORCID
ESOMAT 2009 - 8TH EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATIONS
Article Number: 05003
DOI: 10.1051/esomat/200905003
Published: 2009
3
1. A Comparative Study on Crystal Structure and Magnetic Properties of Fe-
Mn-Si and Fe-Mn-Si-Cr Alloys
By: Balo, S. Nevin
Conference: 3rd International Conference on Superconductivity and
Magnetism (ICSM) Location: Istanbul, TURKEY Date: APR 29-MAY 04, 2012
3
-
36
JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM
Volume: 26 Issue: 4 Special Issue: SI Pages: 1085-1088 Published:
APR 2013, IF = 1.1
3.1.21 Mechanism of reversible transformation-induced plasticity of Fe-Mn-Si shape memory alloys
By:Sawaguchi, T; Bujoreanu, LG; Kikuchi, T; Ogawa, K; Koyama, M; Murakami, M
SCRIPTA MATERIALIA
Volume: 59 Issue: 8 Pages: 826-829
DOI: 10.1016/j.scriptamat.2008.06.030
Published: OCT 2008
65,08
1. Effect of strain amplitude on the low-cycle fatigue behavior of a new Fe-
15Mn-10Cr-8Ni-4Si seismic damping alloy
By: Nikulin, Ilya; Sawaguchi, Takahiro; Kushibe, Atsumichi; et al.
INTERNATIONAL JOURNAL OF FATIGUE Volume: 88 Pages: 132-141
Published: JUL 2016, IF = 2,162
3,33
2. In situ microscopic observations of low-cycle fatigue-crack propagation
in high-Mn austenitic alloys with deformation-induced epsilon-martensitic
transformation
By: Ju, Yun-Byum; Koyama, Motomichi; Sawaguchi, Takahiro; et al.
ACTA MATERIALIA Volume: 112 Pages: 326-336 Published: JUN 15
2016, IF = 5,058
3,33
3. Hydrogen Embrittlement Susceptibility of Fe-Mn Binary Alloys with High
Mn Content: Effects of Stable and Metastable epsilon-Martensite, and Mn
Concentration
By: Koyama, Motomichi; Okazaki, Shota; Sawaguchi, Takahiro; et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL
METALLURGY AND MATERIALS SCIENCE Volume: 47A Issue: 6