first angle length/diameter / o.5-3 z a3 used on · pdf fileansi/aws a2.4-98 iso 2553-1992 iso...
TRANSCRIPT
DWG
DRAWN MATERIAL :
CHK
APPD
AUTH
A3
SPEC :
FINISH :
1
A
2 3 4
B
C
D
A
B
C
D
1 2 3 4
SHEET SHEETS
ORIGINAL DATE
:2016-04-26
FROM CHINA AREA Rev.2016-04-26
ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002
Changes
ALL DIMENSIONS METRIC
STANDARD
940
200
DIM9
DIM10
90
2030�$�
997
30
350
DIM5
DIM3
378
400
(DATE) Change Description Auth. Engineer
2016-12-29 , , 2,4,6,7 ; CAT21767
:1 , EM-W1./Drawing here is truss upper landing,the standard machine is EM-W1.2 XAA26BW./Welding according to file XAA26BW about truss welding.3 , ./If welding tube,welding line must be inside of truss.
A
HAA389AG1
A-A
HAA374C--
HAA299D--
HAA374C--
: ECH2 or( KW=(9.5,11,13,15)and EM-W1) , 60mm( 60 , 902 962)
HAA272P--
/CENTER OF MACHINE
A
O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2
O-1O
1�$� O.5�$� O.3�$� O.15�$� O.1�$�
>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /
ISO 2768-1 ISO 2768-1 MEDIUM
O.5-3RADIUS/CHAMFER /
FIRST ANGLE
OTIS ENGINEERING HANGZHOU
WELDS
TOLERANCE
TOLERANCE
ANGLE (shorter side length) ( )
TOLERANCE
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
HE0101A
2016-04-30
30�$� TRUSS UPPER LANDING
CAT20449
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
z = LEG LENGTH
WELDING SYMBOLS AREUSED ON THIS DRAWING.
z =
WELDS z = LEG LENGTH
ANSI/AWS A2.4-98WELDING SYMBOLS ARE
USED ON THIS DRAWING.z =
ANSI/AWS A2.4-98
WELDS z = LEG LENGTHISO 2553-1992
WELDING SYMBOLS AREUSED ON THIS DRAWING.
z =
ISO 2553-1992
81
zzz
z
z
1
1
1
1
3 8X50
3 10X50
3
6
5
DWG
DRAWN MATERIAL :
CHK
APPD
AUTH
A3
SPEC :
FINISH :
1
A
2 3 4
B
C
D
A
B
C
D
1 2 3 4
SHEET SHEETS
ORIGINAL DATE
:2016-04-26
FROM CHINA AREA Rev.2016-04-26
ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002
Changes
ALL DIMENSIONS METRIC
STANDARD
DIM3
DIM2
DIM6
DIM7
510+TRUSEXU
DIM8
(DATE) Change Description Auth. Engineer
2016-12-29 , CAT21767
HAA299C--
EM-W1,ECH2,EC2-7
EM-W1,ECH2,EC2-7,EM-H1
0 TRUSEXU<100
0 TRUSEXU<100
HAA300A-
C-C
HAA283BE
B-B
O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2
O-1O
1�$� O.5�$� O.3�$� O.15�$� O.1�$�
>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /
ISO 2768-1 ISO 2768-1 MEDIUM
O.5-3RADIUS/CHAMFER /
FIRST ANGLE
OTIS ENGINEERING HANGZHOU
WELDS
TOLERANCE
TOLERANCE
ANGLE (shorter side length) ( )
TOLERANCE
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
HE0101A
2016-04-30
30�$� TRUSS UPPER LANDING
CAT20449
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
z = LEG LENGTH
WELDING SYMBOLS AREUSED ON THIS DRAWING.
z =
WELDS z = LEG LENGTH
ANSI/AWS A2.4-98WELDING SYMBOLS ARE
USED ON THIS DRAWING.z =
ANSI/AWS A2.4-98
WELDS z = LEG LENGTHISO 2553-1992
WELDING SYMBOLS AREUSED ON THIS DRAWING.
z =
ISO 2553-1992
2
zzz
z
z
1
1
4 150
5 320
4 CX50((200))
5 320
5
120 5
120
5 80
5 50(100)
DWG
DRAWN MATERIAL :
CHK
APPD
AUTH
A3
SPEC :
FINISH :
1
A
2 3 4
B
C
D
A
B
C
D
1 2 3 4
SHEET SHEETS
ORIGINAL DATE
:2016-04-26
FROM CHINA AREA Rev.2016-04-26
ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002
Changes
ALL DIMENSIONS METRIC
STANDARD
DIM10
DIM10
DIM13
24
DIM13
DIM10 DIM10
DIM13 :1. , , .2. HE0101A;3. , XAA26BW.
HAA386EZ999HAA135AZ--
TRUSEXU 120mm
HAA135L/N/Q/S
HAA386EZ998
HAA135M/P/R/T
270mm<TRUSEXU 400mm
HAA135L/N/Q/S
HAA135AA
HAA135AH1
HAA135M/P/R/T
HAA386FK999
E-E
120mm<TRUSEXU 270mm
HAA135L/N/Q/S
HAA135AZ
HAA135AA HAA135AH1
HAA135M/P/R/T
400mm<TRUSEXU 1000mm
HAA135L/N/Q/S
HAA135AZ
HAA135AA
HAA135M/R/P/T
HAA135AH1
HAA135AM999
O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2
O-1O
1�$� O.5�$� O.3�$� O.15�$� O.1�$�
>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /
ISO 2768-1 ISO 2768-1 MEDIUM
O.5-3RADIUS/CHAMFER /
FIRST ANGLE
OTIS ENGINEERING HANGZHOU
WELDS
TOLERANCE
TOLERANCE
ANGLE (shorter side length) ( )
TOLERANCE
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
HE0101A
2016-04-30
( )Truss extension (head)
CAT20449
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
z = LEG LENGTH
WELDING SYMBOLS AREUSED ON THIS DRAWING.
z =
WELDS z = LEG LENGTH
ANSI/AWS A2.4-98WELDING SYMBOLS ARE
USED ON THIS DRAWING.z =
ANSI/AWS A2.4-98
WELDS z = LEG LENGTHISO 2553-1992
WELDING SYMBOLS AREUSED ON THIS DRAWING.
z =
ISO 2553-1992
3
zzz
z
z
Z 5
3 x 50 ()
Z 5
4 x 50 (127)
DWG
DRAWN MATERIAL :
CHK
APPD
AUTH
A3
SPEC :
FINISH :
1
A
2 3 4
B
C
D
A
B
C
D
1 2 3 4
SHEET SHEETS
ORIGINAL DATE
:2016-04-26
FROM CHINA AREA Rev.2016-04-26
ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002
Changes
ALL DIMENSIONS METRIC
STANDARD
DIM16
60 , .
(DATE) Change Description Auth. Engineer
2016-12-29 , CAT21767
:HAA316JL =( ALALUM BLACK, ALALUM,SUS304,SUS316)
D-D
( TRUSEXU 500mm )
HAA135V2
HAA316JL
HAA65L2HAA131A3ISO4017M8×30ISO4032M8
O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2
O-1O
1�$� O.5�$� O.3�$� O.15�$� O.1�$�
>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /
ISO 2768-1 ISO 2768-1 MEDIUM
O.5-3RADIUS/CHAMFER /
FIRST ANGLE
OTIS ENGINEERING HANGZHOU
WELDS
TOLERANCE
TOLERANCE
ANGLE (shorter side length) ( )
TOLERANCE
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
HE0101A
2016-04-30
The overall truss stretching
CAT20449
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
z = LEG LENGTH
WELDING SYMBOLS AREUSED ON THIS DRAWING.
z =
WELDS z = LEG LENGTH
ANSI/AWS A2.4-98WELDING SYMBOLS ARE
USED ON THIS DRAWING.z =
ANSI/AWS A2.4-98
WELDS z = LEG LENGTHISO 2553-1992
WELDING SYMBOLS AREUSED ON THIS DRAWING.
z =
ISO 2553-1992
4
zzz
z
z
1
1
5 45
DWG
DRAWN MATERIAL :
CHK
APPD
AUTH
A3
SPEC :
FINISH :
1
A
2 3 4
B
C
D
A
B
C
D
1 2 3 4
SHEET SHEETS
ORIGINAL DATE
:2016-04-26
FROM CHINA AREA Rev.2016-04-26
ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002
Changes
ALL DIMENSIONS METRIC
STANDARD
C
drawing making with no proportion
O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2
O-1O
1�$� O.5�$� O.3�$� O.15�$� O.1�$�
>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /
ISO 2768-1 ISO 2768-1 MEDIUM
O.5-3RADIUS/CHAMFER /
FIRST ANGLE
OTIS ENGINEERING HANGZHOU
WELDS
TOLERANCE
TOLERANCE
ANGLE (shorter side length) ( )
TOLERANCE
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
HE0101A
2016-04-30
FLOORPLATE INTERFACE
CAT20449
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
z = LEG LENGTH
WELDING SYMBOLS AREUSED ON THIS DRAWING.
z =
WELDS z = LEG LENGTH
ANSI/AWS A2.4-98WELDING SYMBOLS ARE
USED ON THIS DRAWING.z =
ANSI/AWS A2.4-98
WELDS z = LEG LENGTHISO 2553-1992
WELDING SYMBOLS AREUSED ON THIS DRAWING.
z =
ISO 2553-1992
5
zzz
z
z
DWG
DRAWN MATERIAL :
CHK
APPD
AUTH
A3
SPEC :
FINISH :
1
A
2 3 4
B
C
D
A
B
C
D
1 2 3 4
SHEET SHEETS
ORIGINAL DATE
:2016-04-26
FROM CHINA AREA Rev.2016-04-26
ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002
Changes
ALL DIMENSIONS METRIC
STANDARD
50
25
50
DIM19
80DIM14
DIM15 DIM15
30
30
2XM8
79
28
100
20
330
90
110
25
(DATE) Change Description Auth. Engineer
2016-12-29 , CAT21767
DIM17
DIM11
HAA65L7
K HAA65L5
K
C
1 , ;2 , ODS 30�$� HE0101A1)THIS DRAWING ONLY DESCRIBED THE LEFT SIDEASSEMBLE BASE OF FLOOR PALTE ON UPPER LANDING,THE RIGHT SIDE IS SYMMETRICAL.2)ALL PARAMETERS AND PARTS NUMBER PLEASE REFER TO THE ODS 30�$� REFER TO HE0101A,
F-F
HAA65L4
HAA386GC-
HAA65L7
HAA386QS--
HAA386FF--
CENTER LINE OF TRUSS
INSIDE OF TRUSS
O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2
O-1O
1�$� O.5�$� O.3�$� O.15�$� O.1�$�
>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /
ISO 2768-1 ISO 2768-1 MEDIUM
O.5-3RADIUS/CHAMFER /
FIRST ANGLE
OTIS ENGINEERING HANGZHOU
WELDS
TOLERANCE
TOLERANCE
ANGLE (shorter side length) ( )
TOLERANCE
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
HE0101A
2016-04-30
- FLOORPLATE INTERFACE
CAT20449
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
z = LEG LENGTH
WELDING SYMBOLS AREUSED ON THIS DRAWING.
z =
WELDS z = LEG LENGTH
ANSI/AWS A2.4-98WELDING SYMBOLS ARE
USED ON THIS DRAWING.z =
ANSI/AWS A2.4-98
WELDS z = LEG LENGTHISO 2553-1992
WELDING SYMBOLS AREUSED ON THIS DRAWING.
z =
ISO 2553-1992
6
zzz
z
z
1
1
5
5
DWG
DRAWN MATERIAL :
CHK
APPD
AUTH
A3
SPEC :
FINISH :
1
A
2 3 4
B
C
D
A
B
C
D
1 2 3 4
SHEET SHEETS
ORIGINAL DATE
:2016-04-26
FROM CHINA AREA Rev.2016-04-26
ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002
Changes
ALL DIMENSIONS METRIC
STANDARD
5575
3035
35X6=210
7XM16
248
275
20190
580
2XM 16
25
(DATE) Change Description Auth. Engineer
2016-12-29 , CAT21767
: ,
HAA386MK_
HAA386ML_
HAA135BS_
A
O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2
O-1O
1�$� O.5�$� O.3�$� O.15�$� O.1�$�
>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /
ISO 2768-1 ISO 2768-1 MEDIUM
O.5-3RADIUS/CHAMFER /
FIRST ANGLE
OTIS ENGINEERING HANGZHOU
WELDS
TOLERANCE
TOLERANCE
ANGLE (shorter side length) ( )
TOLERANCE
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
HE0101A
2016-04-30
- The truss-additional brake port
CAT20449
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
z = LEG LENGTH
WELDING SYMBOLS AREUSED ON THIS DRAWING.
z =
WELDS z = LEG LENGTH
ANSI/AWS A2.4-98WELDING SYMBOLS ARE
USED ON THIS DRAWING.z =
ANSI/AWS A2.4-98
WELDS z = LEG LENGTHISO 2553-1992
WELDING SYMBOLS AREUSED ON THIS DRAWING.
z =
ISO 2553-1992
7
zzz
z
z
1
1
5
5
5
5
6.3
A
DWG
DRAWN MATERIAL :
CHK
APPD
AUTH
A3
SPEC :
FINISH :
1
A
2 3 4
B
C
D
A
B
C
D
1 2 3 4
SHEET SHEETS
ORIGINAL DATE
:2016-04-26
FROM CHINA AREA Rev.2016-04-26
ACCORDING WITH OTIS DOCUMENT 52847 & DRAWING MANUAL ENG_H_S002 OTIS 52847 ENG_H_S002
Changes
ALL DIMENSIONS METRIC
STANDARD
DIM8
10
DIM4
HAA300A-
EM-W1,ECH2,EC2-7,EM-H1
TRUSEXU 100
EM-W1,ECH2,EC2-7,EM-H1 TRUSEXU 100HAA135AH1
O.2 O.5 1O.1 O.2 O.3 O.5 O.8 1.2 2
O-1O
1�$� O.5�$� O.3�$� O.15�$� O.1�$�
>6-3O >3O-12O >12O-4OO >4OO-1OOO >1OOO-2OOO >3-6 >6 >1O-5O >5O-12O >12O-4OO>2OOO-4OOO >4OOO.5-6LENGTH/DIAMETER /
ISO 2768-1 ISO 2768-1 MEDIUM
O.5-3RADIUS/CHAMFER /
FIRST ANGLE
OTIS ENGINEERING HANGZHOU
WELDS
TOLERANCE
TOLERANCE
ANGLE (shorter side length) ( )
TOLERANCE
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
HE0101A
2016-04-30
30�$� TRUSS UPPER LANDING
CAT20449
THIS WORK AND THE INFORMATION IT CONTAINS ARE THE PROPERTY OF OTIS ELEVATOR COMPANY ("OTIS"). IT IS DELIVERED TO OTHERS ON THE EXPRESS CONDITION THAT IT WILL BE USED ONLY FOR, OR ON BEHALF OF, OTIS; THAT NEITHER IT NOR THE INFORMATION IT CONTAINS WILL BE REPRODUCED OR DISCLOSED, IN WHOLE OR IN PART, WITHOUT THE PRIOR WRITTEN CONSENT OF OTIS; AND THAT ON DEMAND IT AND ANY COPIES WILL BE PROMPTLY RETURNED TO OTIS.
WARNING
C
UNPUBLISHED WORK OTIS ELEVATOR COMPANY
C
z = LEG LENGTH
WELDING SYMBOLS AREUSED ON THIS DRAWING.
z =
WELDS z = LEG LENGTH
ANSI/AWS A2.4-98WELDING SYMBOLS ARE
USED ON THIS DRAWING.z =
ANSI/AWS A2.4-98
WELDS z = LEG LENGTHISO 2553-1992
WELDING SYMBOLS AREUSED ON THIS DRAWING.
z =
ISO 2553-1992
8
zzz
z
z
5 320
5 320
4 CX50((200))
3 W
3
(W-120)