fırın türleri (eng)-1
TRANSCRIPT
8/2/2019 Fırın türleri (ENG)-1
http://slidepdf.com/reader/full/firin-tuerleri-eng-1 1/4
Aluminium Homogenizing Furnace- Gas or Electrically convection heating
- Height and angle adjustable air direction channels
- Uniform heating by uniform air velocity
- ± 5°C temperature homogenity on the logs
- Regional temperature control capability
- Low fuel consumption, low heat loss
- Special design sealed, cooled and clamped door
- Inventor cotrolled circulation fans
- Dual side air-water cooling cooling cabinet
- PLC based control system, recording operator panel
- 5.000 - 40.000 kg/batch capacity
- Fast and secure loading car with speed control
Aluminium Ageing Furnace (Hot Car)- Gas or Electrically heating
- Convection heating with thermoblock
- Reaching to 175°C-185°C temperature in 1 h
- Dual end air flow direction on soak- Angle adjusment air direction channels
- ± 5°C temperature homogenity on heat up
- ± 2°C temperature homogenity on soak
- Regional temperature control capability
- Low fuel consumption, low heat loss
- Special design sealed and clamped door
- PLC based control system, recording operator panel
- 3.000 - 18.000 kg/batch capacity
Aluminium Ageing Furnace (Cold Car)- Gas or Electrically heating- Convection heating with thermoblock
- Reaching to 175°C-185°C temperature in 1 h
- Dual end air flow direction on soak
- Angle adjusment air direction channels
- ± 5°C temperature homogenity on heat up
- ± 2°C temperature homogenity on soak
- Regional temperature control capability
- Low fuel consumption, low heat loss
- Special design sealed and clamped door
- PLC based control system, recording operator panel
- 3.000 - 18.000 kg/batch capacity
Al. Ageing Furnace (Chain Bottom)- Gas or Electrically heating
- Convection heating with thermoblock
- Reaching to 175°C-185°C temperature in 1 h
- Dual end air flow direction on soak
- Angle adjusment air direction channels
- ± 5°C temperature homogenity on heat up
- ± 2°C temperature homogenity on soak
- Regional temperature control capability
- Low fuel consumption, low heat loss
- Special design sealed and clamped door
- PLC based control system, recording operator panel
- 3.000 - 18.000 kg/batch capacity
8/2/2019 Fırın türleri (ENG)-1
http://slidepdf.com/reader/full/firin-tuerleri-eng-1 2/4
Double Chamber Al. Melting Furnace- Hydraulically tilting or stationary
- Gas or Diesel Oil Heating
- Useful for coil, sheet, log and ingot casting houses
- Rapid melting, low metal loss, low fuel consumption
- Twin chamber system as melting and holding chamber,
independent temperature control
- Fast and safe charging with scrap charging machine
- Appropriate to usage with Electro Magnetic Pump
- Easy access to the chambers for cleaning
- Dismountable roof system for easy service
- Long life refractory lining
- Wide capacity range
Die Heating Furnace- Car, Drawer or Top Loading Type
- Gas or Electrically rapid heating
- Dual direction air circulation convection heating
- Heigth adjusment air direction channels- ± 2°C temperature homogenity
- Regional temperature control capability
- Low fuel/power consumption, low heat loss
- Automatic flame length/resistance current control
- Special design sealed, cooled and clamped door
- PLC based control system, recording operator panel
- Wide capacity range
- Fast and secure loading & unloading
Aluminium Solutioning Furnace
- Gas or Electrically rapid heating- Convection heating, radiation protection
- Elevator loading from drop bottom
- Uniform air velocity, uniform heating
- Controlled water cooling
- Automatic flame length/resistance current control
- Regional temperature control capability
- ± 5°C temperature homogenity
- Low fuel/power consumption, low heat loss
- Special design sealed, two pairs door
- PLC based control system, recording operator panel
- Wide capacity range acc. to process requirement
Aluminium Profile Drying Furnace- Single or double chamber, bar or basket loading
- Gas, Diesel Oil or Electrically heating
- Convection heating with thermoblock, radiation
protection
- Automatic flame length/resistance current control,
rapid drying
- Uniform air velocity, uniform heating
- ± 5°C temperature homogenity
- Low fuel/power consumption, low heat loss
- Special design sealed, two pairs door
- PLC based control system, recording operator panel
- Wide capacity range acc. to process requirement
8/2/2019 Fırın türleri (ENG)-1
http://slidepdf.com/reader/full/firin-tuerleri-eng-1 3/4
Liquid Aluminium Transfer LadleAppropriate for carrying with the fork-lift or the crane
- Excellent geometrical shape for pouring
- Capable to full empty the molten metal
- Quick attach and detach system
- Very low heat loss and excellent molten metal
temperature protection
- No sticking with the molten metal
- Not necessary to preheat before filling
- Durable and light steel construction and insulation
- Appropriate for inside degassing
- Wide capacity range
- 100 kg to 1.200 kg liquid aluminium carrying capacity
Shaft Type Al. Melting Furnace- Hydraulically tilting or stationary
- Gas or Diesel Oil Heating
- Rapid melting, low metal loss, low fuel consumption
- Twin chamber system as melting and holding chamber,
independent temperature control
- Elevator shaft loading system
- Capable to full empty the bath
- Easy access to the chambers for cleaning
- Dismountable roof system for easy service
- Long life refractory lining
- 500 - 3.000 kg/h melting rate
- 1.000 - 6.000 kg holding capacity
Crucible Tilting Al. Melting Furnace
- Gas, Diesel Oil or Electrically heating- Compact design, minimal area occupation
- Using up to 1400°C chamber temperature
- Recuperative chimney (for gas heating type)
- Shortened melting time by chamber geometry
- Low metal loss, low fuel consumption
- Automatic flame length/resistance current control
- Chamber and metal temperature control
- Manual or pneumatic top cover
- Explosion cover
- Long life refractory lining
- Wide capacity range
Aluminium Impregnation Line- Compact design and minimal area occupation
- Vacuum tank with return filter, lighting, wide angle of
vision and pneumatic cover
- Resin tank with easy cleaning
- Resin extraction unit with pneumatic basket tilting,
automatic stripper and rotating drum
- PVC or stainless steel rinsing tanks with top cover
- Polymerization tank with electrical heating, thermostat,
insulation and pneumatic cover- Centrifuge drying unit with softstarting, high revolution
and time adjustment
- Wide capacity range
8/2/2019 Fırın türleri (ENG)-1
http://slidepdf.com/reader/full/firin-tuerleri-eng-1 4/4
Steel Annealing Furnace- Gas or Electrically heating
- Automatic flame length/resistance current control
- ± 10°C temperature homogenity at 1.250°C
- Regional temperature control, üniform heating
- Hydraulically pressed bottom sealing
- Low fuel consumption, low heat loss
- Special design, long life wall and base insulation
- Exhaust gate valve with pressure control
- Controlled cooling option inside of the furnace
- Loading car with insulation and speed control
- PLC based control system, recording operator panel
- Wide capacity range acc. to process requirement
Rotary Type Copper Melting Furnace- Stationary or tilting base
- Gas or Diesel Oil heating
- Low metal loss, low fuel consumption
- Long life insulation by using special bricks- Special steel body with thermal compensation
- Pivot type door with pneumatic control
- Rotating system with speed control, direction selection
- Safe and sensitive stopping by eldro brake
- Movable and easy cleaning chimney
- Automatic flame length control
- PLC based control, recording operator panel
- Wide capacity range
Marble Drying & Resin Line- Infrared Heating Drying and Curing Furnace- Resin & Repair Conveyor With Hood & Illumination
- Adjustable heater height acc. to the material thickness
- ± 5°C temperature homogenity, regional temp. control
- Excellent Air Circulation, Vapour Exhaust and Water
Strip System
- Low power consumption, low heat loss, rapid heating
- Special design sealed, pivoted type and pneumatically
open-close furnace roof
- Strong and speed adjustable chain conveyor
- PLC based control system, recording operator panel
- Wide capacity range
Big-Bag Filling Line- Main hopper acc. to required capacity
- Helix conveyor with speed control motor drive
- Weighing hopper with Load-Cell
- Bag clamping system with pneumatic control
- Bag rising elevator with hydraulic control
- Position control system on elevator
- Rubber conveyor with motor drive, sliding protection
- Optional, palette roller conveyor
- Optional, weighing conveyor
- Powder collection system
- PLC based control system, recording operator panel
- Wide capacity range