Dry Powder Fire Extinguishers

PRODUCT DESCRIPTIONNAFFCO stored pressure type dry powder extinguishers are characterised by their high performance, simple method of operation and rapid fire knock down capability. They are suitable for tackling fires involving freely burning materials, petrol, oil, gas and electrical equipment. They are ideal for vehicle & marine risks. NAFFCO ABC powder extinguishers contain high performance powder and are one of the most powerful powder extinguishers in the world.

FEATURES

Ideal Use: Houses, office, buildings, warehouses, farms, wood working area etc.Note: Not recommended for use on expensive and delicate equipment like computers, etc.

*High Fire Rating Using Special ABC Powder

Monoammonium phosphate based dry chemical agent. Capable of fighting Class A, B, C and E fires

Kitemark certied to BS EN3 Cylinders compliance to council directive

97/23/EC (PED) and Statutory instrument 1999 No.2001 is certified by BSI (0086)

Certified by BSI under marine equipment directive

High quality polyster paint Controlled discharge Brass nickel plated head valve with simple

squeeze operation Unique gauge testing system Unique colour coded handle and base

(Optional) Rechargeable and easy to service Choice of capacity from 1 to 12 Kg

MODEL NUMBERExtinguisher CapacityPropellantFire Rating

Maximum Operating PressureWorking Pressure

Test PressureTotal WeightRange of Discharge

Hose Length with NozzleDuration of Discharge

Operating TemperatureCylinder Material

NP1 NP22kg

13A 70B14 Bar

3.7kg5-7m

10-12 secN/A

1kg

8A 34B14 Bar

1.8kg4-5m

7-9 secN/A

NP33kg

21A 89B14 Bar

5.8kg6-7m

11-12 sec395mm

NP44kg

21A 113B15 Bar16.5 Bar @ 60C

-20C to +60CCRCA Steel Sheet

7.5kg7-8m

13-15 sec457mm

NP66kg

34A 183B15 Bar

10 kg6-8m

18-20 sec534mm

NP66kg

43A 233B*15 Bar

14 kg7-8m

20-22 sec534mm

NP99kg

43A 233B15 Bar

14 kg6-8m

22-24 sec524mm

NP1212kg

55A 233B15 Bar

30 Bar17.8 kg6-8m

28-30 sec617mm

1. Valve / Extn. Lever2. Safety Pin with Chain3. Valve Handle4. Pressure Gauge5. Discharge Hose6. Syphon Tube7. Hose Holder8. Discharge Nozzle9. PVC Base

Height x Diameter (in mm) 385 x 110337 x 78 420 x 132 408 x 150 520 x 150 520 x 150 515 x 185 620 x 185

95% Nitrogen + 5% Helium

Wet Chemical Fire Extinguishers

PRODUCT DESCRIPTIONNAFFCO stored pressure type wet chemical extinguishers are used for cooking oil or fat res where the pray gives almost immediate ame. Extinguishment happens while the wet chemical agent reacts with oil to form a soap like lm to seal the surface of the oil and cool it down to prevent re-ignition.

Suitable for Class A re risks.

FEATURES Water, a liquid agent only recommended for

ghting Class A Fire. Kitemark certied to BS 7937:2000 and BSEN3 Cylinders compliance to council directive

97/23/EC (PED) and Statutory instrument 1999 No.2001 is certied by BSI (0086)

Certied by BSI under marine equipment directive

High quality polyster paint

Thermoplastic internal coating to prevent corrosion

Fire mist spray to prevent grease splashing Brass nickel chrome plated head valve with

simple squeeze operation Unique gauge testing system Unique colour code handle and base (Optional) Rechargeable and easy to service Passed 35KV electrical conductivity test

1. Valve / Extn. Lever2. Discharge Hose3. Safety Pin with Chain4. Valve Handle5. Pressure Gauge6. Hose Holder7. Syphon Tube8. PVC Internal Coating9. Filter10. Discharge Nozzle11. PVC Base

Ideal Use: Commercial kitchens in connection with NAFFCO Pre-engineered Hood SystemsCaution: Dont use on electrical re

MODEL NUMBERExtinguisher CapacityPropellant

NKE 3X*NKE 2* NKE 63ltr2ltr

95% Nitrogen + 5% Helium6ltr

Fire Rating

Maximum Operating PressureWorking Pressure

Test PressureTotal WeightRange of Discharge

Hose Length with NozzleDuration of Discharge

Operating Temperature

8A 25F5F10 Bar10 Bar

11.5 Bar @ 60C11.5 Bar @ 60C30 Bar30 Bar7.2kg4.4kg1m1m

30-35 sec40-45 sec610mmN/A

0C to +60C0C to +60C

13A 75F10 Bar

11.5 Bar @ 60C30 Bar12.5kg

1m50-55 sec610mm

0C to +60CHeight x Diameter (in mm) 505 x 185420 x 110 420 x 1324*LPCB approval only

Cabinets for Fire Hose Reel, Fire Equipmentsand Breeching Inlet

PRODUCT DESCRIPTIONNAFFCO cabinets are designed to accommodate re hose reel, re ghting equipment and breeching inlet. Fire hose reel cabinets are manufactured to comply with BSEN 671-1 standard and breeching inlet cabinets are manufactured to comply to BS 5041-5 standard.

FEATURES LPCB Certied Cabinet material made of Electro

Galvanized sheet or Stainless Steel Sheet (Full stainless steel brush or mirror nish)

Locking of cabinet is either key operated or round handle cam latch

Cabinets are available either in surface mounted

or recessed mounted type Cabinet door shall be solid door or glass door

(Clear glass or wired glass) Breeching inlet cabinets are available in

horizontal or vertical version

CABINETS

6x4 Way Breeching Inlet

PRODUCT DESCRIPTIONNAFFCO breeching inlets are suitable for installation on dry risers only, in a building for re ghting purposes, tted with inlet connection at re brigade access level and outlet connection at specied points, which is normally dry but capable of being charged with water by pumping from re service appliances.

The breeching inlets are manufactured to comply to BS 5041 PART-3:1975 standard comprising of male instantaneous connections complying with BS 336:2010, drain valves complying with BS 5154, PN16 rated and non-return valves.

The breeching inlets and its ttings are suitable for a normal working pressure of 10 bar and for working temperature range from 0C to 38C.

FEATURES BSI Kitemark & LPCB certied Body material made of spheroidal graphite iron

to BS 1563:1997 Inlet connection and non-return valves material

made of copper alloy to BS 12163:1998

Each inlet connection is tted with non-return valve and of spring loaded mushroom type

Each breeching inlet is painted RED internally and externally

BILL OF MATERIAL

NDR095

Description

4 Nos. Male Instantaneous Connector Complying to BS 336

Body

Normal Working Pressure of 10 Bar150 mm Flanged Outlet

20 BarBS 4504 Part : 2 : 1974 Table : 16/21

Inlet Connection & Non-Return ValvesDrain Valve

Blank Cap for Drain ValveBlank Cap for Inlet Connector

MODEL

S. No.

Inlet Connection

12

Pressure Rating

Nominal Size

Test Pressure

Flange Drilling

345

MaterialSpheroidal Graphite Cast Iron to BS EN 1563:1997

Copper Alloy to BS EN 12163:1998Copper Alloy to BS EN 12163:1998Copper Alloy to BS EN 12163:1998

Plastic

front-coverpage 02page 03page 04Page 05page 06page 07Page 08page 09page 10page 11page 12page 13page 14page 15page 16page 17page 18page 19page 20page 21page 22page 23page 24page 25page 26page 27page 28page 29page 30page 31page 32page 33back cover