fire and electrical hazards
TRANSCRIPT
![Page 1: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/1.jpg)
FIRE AND ELECTRICAL HAZARDS
PRESENTED BY
RESHMA FATHIMA.K
FIRST YEAR M.PHARM
DEPARTMENT OF PHARMACEUTICS
![Page 2: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/2.jpg)
CONTENTS INTRODUCTION
FIRE AND EXPLOSION HAZARDS
CONTROL OF FIRE AND EXPLOSION
INDUSTRIAL PLANT
FIRE EXTINGUISHERS
ELECTRICAL HAZARDS
HOW SHOCK OCCUR
TYPES OF ELECTRICAL HAZARDS
PREVENTION OF ELECTRICAL HAZARDS
![Page 3: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/3.jpg)
INTRODUCTION
Hazard is a term associated with a substance that is
likelihood to cause an injury in a given environment
or situation.
Industrial hazard may be defined as any condition
produced by industries that may cause injury or
death to personnel or loss of product or property
safety in simple terms means freedom from the
occurrence of risk or injury or loss.
![Page 4: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/4.jpg)
Industrial safety or employee safety
It refers to the protection of workers from the
danger of industrial accidents.
Safety hazards
Toxic and corrosive chemicals,fire,explosions and
personnel falling into accidents are the major
health and safety hazards encountered in the
operations of chemical and pharmaceutical related
industries.
![Page 5: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/5.jpg)
Accident prevention needs systemic and technical
study of every aspect of the plant design and
operation. Todays industry employs user friendly
machinery, which can withstand human error and
equipment failure.
![Page 6: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/6.jpg)
FIRE OR COMBUSTION
Combustion may be defined as a chemical reaction
accompanied by the emission of light and heat
Three factors are essential for combustion namely
Combustible materials
Oxygen
Temperature
FIRE AND EXPLOSION HAZARDS
![Page 7: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/7.jpg)
Spontaneous combustion and non explosion proof
electrical equipment is the potential ignition
source.
Fire occur in industry is more frequently than
explosions and toxic release, although the
consequences in terms of loss of life are generally
less. Therefore fire might be less hazardous.
Fire can take several different forms including
Jet fires
Pool fires
Boiling liquid expanding vapour explosion.
![Page 8: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/8.jpg)
CONTROL OF FIRE AND
EXPLOSION
Fire protection provisions are applicable to
bulk drug industries, whether
synthetic,biological or microbiological.
Government regulations are available for
safety in fire protection.
![Page 9: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/9.jpg)
Careful plant layout and judicious choice of constructional
materials can reduce fire and explosion hazards.
Hazards operations should be isolated by conducting them in
separate buildings.
• Fire resistance brick walls or reinforced concrete walls can
limit the effect of an explosion.
The roof is designed to left easily under an explosive force
Possible sources of fire are reduced by eliminating ignition
sources.
Installation of fire alarms temperature alarms fire fighting
equipment and sprinkler system must be specified in design
![Page 10: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/10.jpg)
INDUSTRIAL PLANT
Location
Arrangement of buildings
Fire mains, hydrants and hoses
Fire alarm equipment
BUILDINGS
Type of construction
Exits
Lighting
Color in industry
![Page 11: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/11.jpg)
Ventilation
Sanitation
Automatic sprinkler system
First aid
Fire extinguisher
Equipment
Avoiding of general machinery
Flammable liquids
![Page 12: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/12.jpg)
Fires are divided into three categories
Class A fires – originated from ordinary combustible
materials
Class B fires-originated from oils , greases,
flammable liquids etc.
Class C fires – originated from electrical equipments
![Page 13: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/13.jpg)
FIRE EXTINGUISHERS
Soda acid extinguisher
Water gas extinguisher
Foam extinguisher
Carbon dioxide extinguisher
Dry powder chemical extinguisher
![Page 14: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/14.jpg)
ELECTRICAL HAZARDS
Electrical hazards are 1 of the 4 main hazards in construction
causing serious injury or death. Approximately 350
electrically related fatalities occur each year. That’s 350
deaths that could be prevented
Many people working with electricity do not understand how
it works. Operating an electrical switch is like turning on a
water faucet. Behind the faucet (or)switch there is a source
of water (or electricity), a way to transport it, and pressure
to make it flow. The faucet’s water source is a reservoir or
pumping station.
![Page 15: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/15.jpg)
A pump provides enough pressure for the water to
travel through the pipes. The switch’s electrical
source is a power generating station. A generator
provides the pressure for the electrical current to
travel through electrical conductors, or wires.
Three factors determine the resistance of a
substance to the flow of electricity:
What is made of
Its temperature , its size
![Page 16: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/16.jpg)
HOW SHOCKS OCCUR
Electricity travels in closed circuits, normally
through a conductor. Shock results when the body
becomes part of the electrical circuit; current
enters the body at one point and leaves at
another. Typically, shock occurs when a person
contacts:
Both wires of an energized circuit
One wire of an energized circuit and the ground
![Page 17: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/17.jpg)
A metallic part in contact with an energized wire while the
person is also in contact with the ground.
The most frequent causes of electrical injury/death are:
Contact with power lines
Lack of ground-fault protection
Path to ground missing or discontinuous
Equipment not used in manner prescribed
Improper use of extension and flexible cords
![Page 18: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/18.jpg)
TYPES OF ELECTRICAL
HAZARDSSHORT CIRCUIT
SERIES CIRCUIT
PARALLEL CIRCUIT
SHORT CIRCUIT
A short circuit is a low resistance path usually made
unintentionally that bypasses the part of a circuit.
This can happen when two base coils in a circuit
touch each other.
![Page 19: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/19.jpg)
SERIES CIRCUIT
The same current flows through all the components.
The total voltage across the circuit is the sum of
voltages across each components and the total
resistance is the sum of the total resistances of
each components
V=V1 + V2+ V3
R = R1 + R2 + R3
![Page 20: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/20.jpg)
PARALLEL CIRCUIT
Smaller wires connected parallel with same voltage but
different amount of current flowing through them
depends upon the resistance of the individual wires.
TO AVOID HAZARDS
Look for overhead power lines and buried power line
indicators. Post warning signs.
Contact utilities for buried power line locations.
Stay at least 10 feet away from overhead power lines
![Page 21: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/21.jpg)
Use double-insulated tools and equipment, distinctively marked.
Use tools and equipment according to the instructions
included in their listing, labeling or certification.
Ground all power supply systems, electrical circuits,
and electrical equipment.
Frequently inspect electrical systems to ensure that the
path to ground is continuous.
Visually inspect all electrical equipment before use.
Take any defective equipment out of service
![Page 22: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/22.jpg)
Frequently inspect electrical systems to ensure
that the path to ground is continuous.
Visually inspect all electrical equipment before
use. Take any defective equipment out of service
Use non conducting wood
Use only extension cords that are three wire type
![Page 23: Fire and electrical hazards](https://reader036.vdocuments.site/reader036/viewer/2022082213/55a980e61a28ab2f288b4692/html5/thumbnails/23.jpg)