©2014 Riley Blake Designs

FINISHED QUILT SIZE 67” x 79¾”Finished Block Size 9” x 9”Measurements include ¼” seam allowance.Sew with right sides together unless otherwise stated.

Please check our website www.rileyblakedesigns.com for any revisions before starting this project. This pattern requires a basic knowledge of quilting technique and terminology. The quilt and block diagrams portrayed are virtual images. The layout and look of your project may differ when using actual fabric.

FABRIC REQUIREMENTS1 Roots & Wings 10-inch Stacker (10-4150-15)1¾ yards (1.65 m) brown main (C4150 Brown)¾ yard (70 cm) green dot (C4154 Green)13/8 yards (1.3 m) linen shade (C200-01 Linen)17/8 yards (1.75 m) flamingo shade (C200-52 Flamingo)Binding 5/8 yard (60 cm)Backing 47/8 yards (4.5 m)

CUTTING REQUIREMENTSPlease read instructions first before cutting. Seam allowances vary so measure through the center of the quilt before cutting the border pieces.

10-inch StackerCut 1 square 9½” x 9½” from each of the following assorted prints:

coral main, cream main, coral garden, cream gardengreen garden, blue daisy, coral daisy, red daisy, blue stripecoral stripe, green dot, yellow dot

Brown MainCut 7 strips 6½” x WOF for Border 2.

Green DotCut 8 strips 2” x WOF.Cut 2 strips 3½” x WOF. Cut the strips into 20 squares 3½” x 3½”.

Linen ShadeCut 8 strips 2” x WOF.Cut 8 strips 3½” x WOF. Cut the strips into 80 squares 3½” x 3½”.

Flamingo ShadeCut 2 strips 14½” x WOF. Cut the strips into 4 squares 14½” x 14½”

and 2 squares 8” x 8”. Cut each 8” square once diagonally to create 4 corner triangles. Cut each 14½” square twice diagonally to create 16 setting triangles (2 will not be used).

Cut 6 strips 2½” x WOF for Border 1.

QUILT ASSEMBLYRefer to the quilt photo for placement of fabrics.

Chain BlockSew a 2” green dot strip and a 2” linen shade strip together. Press. Repeat with remaining green dot strips and linen shade strips. Cut the strips into 2” segments. Sew the segments together to create 80 Four-Patch Units.

Referring to quilt photo for placement of fabrics, sew together 4 Four-Patch Units, 1 green dot 3½” x 3½” square, and 4 linen shade 3½” x 3½” squares to create the Chain Block. Repeat to make 20 Chain Blocks.

Quilt Center AssemblyRefer to the quilt photo for Chain Block, Center Square and Setting Triangle placement. Sew rows together on the diagonal to complete the center of the quilt. Add Corner Triangles. The Corner and Setting Triangles are intentionally cut larger in order to square up the quilt center, leaving ¼” seam allowance on all sides, before adding the borders.

BordersSeam allowances vary so measure through the center of the quilt before cutting border pieces. Sew border strips together end to end if necessary to get the length needed. Sew side borders first.

Border 1Side borders should be 641/8”. Top and bottom borders should be 55½”.

Border 2Side borders should be 681/8”. Top and bottom borders should be 671/2”.

Finish quilt by layering the quilt top, batting, and back. Bind with your favorite Riley Blake fabric from the Roots & Wings Collection. Have fun with your colors and enjoy the journey of making your quilt.

Four-Patch Unit

Chain Block