final catalogue 2015 ipu

ENGINEERINGCATALOGUE 2015

S.K. KATARIA & SONS(An ISO 9001-2008 Company)

New Delhi and (INDIA)Ludhianafor online shopping visit us at:www.skkatariaandsons.com

Publishers

KATSON EDUCATIONAL SERIES

Bestsellers, Latest Editions &

New Releases

e-books Available at:www.katsonbooks.com

www.rockstand.in

www.kopykitab.com

Civil

Architecture

Mechanical

Production

Electrical

Electrical & Electronics

Electronics & Communications

Electronics & Instrumentation

Computer Science

Information Technology

Applied Science

A.M.I.E.

Objective Type

GATE

In Association with

China Communication Press

ABOUT THE PUBLISHER

HEARTY WELCOME TO NEW AUTHORS

M/s S.K. Kataria & Sons is a well renowned name amongst the publishers of Engineering

and Computer Books both in India andAbroad.

The Publication started in 1989, and the ever increasing number of readers and customers

from all over the world have helped the publication in achieving a successful profile. The

main aim of our publication is to impact versatile knowledge to the students and readers

that lead them to the crystal clear world of wisdom and knowledge. Our books provide

wings to student to flutter in all tough fields of competition and reach the zenith of success

and fame. Our success entirely depends on:

• Selection of authors having profound knowledge and experience in their area of work.

• Examination oriented package programs for the students and teachers.

•Affordable prices of our books.

• Use of easy and simple language in our books.

• Solved problems and questionnaire added for the benefit of the students.

• Usage of quality printing and illustrative diagrams.

With the above features and many more, we enrich the strength of readers including both

students and teachers.

We look forward to your co-operation and support, and as we are completely devoted to the

selfless service to the learning community.

M/s S.K. Kataria & Sons, the publishers of Engineering and Computer Books, are like

heaven for all enterprising and enthusiastic authors. We would like to welcome qualified

and specialized authors to work in the fields of:

• Mechanical, Mechatronics, Production and Chemical.

• Civil,Applied Mechanics and Environmental Studies.

• Electrical, Electronics and Instrumentation.

• Neural Networks,Artificial Intelligence and Fuzzy Fields.

• Biotechnology, Nanotechnology and Bioinformatics.

• Hardware, Software and Networking.

• Mathematics, Physics, Chemistry and English.

If you are specialized in any of the above areas and intend to write books for our publication

please e-mail your proposal to the following e-mail address.

• [email protected]

• [email protected]

We shall contact you and introduce you to our professional team. We shall humbly wait for

your proposal and manuscript.

Other terms and conditions also apply as per the rules and regulations of the firm.

KATSON EDUCATIONAL SERIES

CATALOGUE20152015

S.K. KATARIA & SONS(An ISO 9001-2008 Company)

R.O.: 4885/109, Prakash Mahal, Dr. Subhash Bhargav Lane,Opp. Delhi Medical Association, Daryaganj, New Delhi-110002 (India)

Tel.: +91-11-23243489, 23269324, Fax: +91-11-23243489H.O.: Opp. Clock Tower, Ludhiana (Pb.), Tel.: 0161-2726401

email: [email protected], [email protected]

Publishers of Engineering and Computer Books

CONTENTS

Topic Pages

Civil Engineering 1-21

Mechanical Engineering 22-58

Electrical Engineering 59-78

Electronics Engineering 79-136

Computer Engineering 137-175

Applied Science 176-189

A.M.I.E Books 190

Objective Type Books 191-193

GATE Books 194

List of Our Distributors

S.K. KATARIA & SONS

CIVIL ENGINEERING

A Course in

CIVILENGINEERING

DRAWING

Size : 23 × 36/8Pages : 575 Approx.ISBN 13: 978-93-5014-272-1ISBN 10: 81-88458-88-0

Price : 350/-Seventh Edition : 2015

`

CONTENTS• Draughtsmanship and Engineering Drawing • ConventionalRepresentations, Scale andAbbreviations

• Masonry • Foundations, Plinth, Damp Proofand • Basement Floors (Ground and Upper Floors)• Forms of Arches, Centering and Lintels • Partition Walls• Joints in Carpentry • Doors and Windows • Roofs (Sloping and Flat)• Retaining Walls • Framed Structures • R.C.C. Structures • Stairs andStaircases • Isometric and Perspective Views • Building Drawing,Planning and Design.

• Public Health Engineering• Irrigation Drawing • Swimming Pool • Wells and

Tube Wells • Vastu Shastra • Bricks “Jali” Work or Bricks Trellis • Index.

Part-I: Building Details

Part-II: Public Health EngineeringPart-III: Irrigation

By

V. B. Sikka

A Textbook of

For and

BASIC DRAWINGArchitects

Civil Engineers

CONTENTS•Architectural Drawing and Instruments • Conventional Lines and LineWork with Different Intensities • Lettering • Scales • Dimensioning andGeometrical Shapes • Orthographic Projections • Conic Sections• Projection of Points and Lines • Projection of Simple Solids • Sectionof Solids and Elementary Building- Sections • Development of Surfaces• Isometric Views •Axonometric Views • Oblique Views.

By

V.B. Sikka

INDUSTRIALSAFETY

ANDENVIRONMENT


Price: 130/-Reprint : 2015

`

CONTENTS• Introduction to Safety • Industrial Accidents • Industrial Hazards• Planning for Safety • Safety Standards and Legislation • Basics ofEnvironment • Industrial Fatique • Heat Stress in Industry • Ventilationand Air-Conditioning • Noise • Vibrations • Lighting for Working• Industrial Waste • Environment Standards • Occupational Ergonomics• Occupational Stress • Occupational Health • Question Bank • SampleQuestion Papers • PreviousYears Question Papers • Index.

ByAnupama PrasharPratibha Bansal

Size: 20 × 26/8Pages: 425 Approx.ISBN 13: 978-93-5014-385-8ISBN 10: 81-88458-77-5

Price: 210/-Reprint: 2015

`

CONTENTS• The Multidisciplinary Nature of Environmental Studies • NaturalResources: Renewable and Non-Renewable Resources • Ecosystems• Biodiversity and Its Conservation • Environmental Pollution • SocialIssues and the Environment • Human Population and the Environment• Selective Bibliography • Model Question Papers • Examination Paper• Index.

ENVIRONMENTALSTUDIES

1

Size: 20 × 30/8Pages: 375 Approx.ISBN : 978-93-5014-575-3

Price: 295/-First Edition: 2015

`

By

Dr. Suresh K. Dhameja

Two Colours Edition

CIVIL ENGINEERING

ENVIRONMENTALENGINEERING

ANDMANAGEMENT

Size : 23 × 36/16Pages : 525 Approx.ISBN 13 : 978-93-5014-411-4ISBN 10 : 81-85749-45-0


`

CONTENTS• Introduction • Environment and Ecology • Environmental Pollution• Environmental Education • Science of Environment• Water Pollution • Marine Pollution • Air Pollution • Noise Pollution• Land: Use and Abuse • Landscape Pollution and Solid WasteManagement • Environmental Impacts of Deforestation and Mining• Radioactive and Chemical Pollution • Energy : Sources and Scenario• Non-Conventional Sources of Energy • City and HousingEnvironment • Environmental Legislation • Environmental ImpactAssessment • ISO: 14000 : Environmental Management Systems• Environmental Audit • International and National Efforts atEnvironment Protection • Current Environmental Issues,Miscellaneous Topics and Some Tragic Incidents • SelectedBibliography • Index.By


ENVIRONMENTALSCIENCE

ANDENGINEERING

CONTENTS• The Multidisciplinary Nature of Environmental Studies • NaturalResources: Renewable and Non-Renewable Resources • Ecosystems• Biodiversity and Its Conservation • Environmental Pollution • SocialIssues and the Environment • Human Population and the Environment• Selective Bibliography • Model Question Papers • ExaminationPapers • Index.

By





`

CONTENTS• The Multidisciplinary Nature of Environmental Studies • NaturalResources: Renewable and Non-Renewable Resources • Ecosystems• Biodiversity and Its Conservation • Environmental Pollution • SocialIssues and the Environment • Human Population and the Environment• Selective Bibliography • Model Question Papers • ExaminationPapers • Index.

By



Price: 195/-Fourth Edition: 2013

`

CONTENTS• Definition of Environment • Ecosystem • Effects of Human Activitieson Environment • Natural Resources • Definition of Energy• Environmental Pollution • Current Environmental Issues• Environmental Legislation • Glossary • Model Question Papers• PreviousYear Question Paper (Solved) • Index.

ENVIRONMENTAND

ECOLOGY

Size: 20 × 26/8Pages: 425 Approx.ISBN : 81-88458-78-3


`

By

Smriti Srivastava

S.K. KATARIA & SONS2

S.K. KATARIA & SONS

CIVIL ENGINEERING


Size: 20 × 26/8Pages: 350 Approx.ISBN: 978-81-89757-45-8

Price : 195/-Reprint: 2015

`

CONTENTS• Environmental Studies—A Multidisciplinary Subject • NaturalResources • Ecosystem • Biodiversity and its Conservation• Environmental Pollution • Social Issues and Environment • HumanPopulation and Environment • Glossary • Index.

By

Smriti Srivastava

ENERGYENVIRONMENT

ECOLOGYAND SOCIETY

CONTENTS• Energy • Ecosystem • Biodiversity •Air and Noise Pollution • WaterPollution and Disaster Management • Society and Ethics • Index.

By

Smriti Srivastava

A Textbook of

ENERGYENVIRONMENT

ANDECOLOGY


Price: 195/-Second Edition: 2013

`

CONTENTS• Definition of Environment • Ecosystem • Sustainable Development andBiodiversity • Natural Resources • Energy Resources • EnvironmentalPollution • Current Environmental Issues and Climate Change• Environmental Protection and Control Measures • Model Test Papers• PreviousYear Solved Question Paper • Index.

BySmriti Srivastava

CONTENTS• Definition of Environment • Ecosystem • Biodiversity • NaturalResources • Definition of Energy • Human Population and Environment• Social Environmental Issues • Environmental Pollution • ClimateChanges and Impact on Human Health • Indicators and ImpactAssessment • Environmental Protection • Glossary • Previous YearQuestion Papers (Solved and Unsolved) • Index.

ENVIRONMENTAND

ECOLOGY

3



`

By

Smriti Srivastava



`

CIVIL ENGINEERING

Fundamentals of


Size : 20 × 26/8Pages : 325 Approx.ISBN : 978-93-5014-388-9


`

CONTENTS• Multidisciplinary Nature of Environment • Natural Resources•Ecosystem • Biodiversity • Environmental Pollution • Social Issuesand the Environment • Human Population and Environment • ModelQuestion Papers • PreviousYears Question Papers • Index.

An Introduction to

REMOTE SENSINGAND

ITS APPLICATIONS

CONTENTS• Photogrammetry • Introduction to Remote Sensing • ImageInterpretation • Digital Image Processing • Microwave Remote Sensing• Hyperspectral Remote Sensing • Geographic Information System(GIS) • Global Positioning System (GPS) • Applications of RemoteSensing • Glossary • Lab Experiments • Model Papers • Index.

By

Shivangi SomvanshiMaya Kumari

WATERAND

WASTE WATERSYSTEMS

ENGINEERINGAND GENERAL

GEOLOGY


Price: 265/-Second Edition : 2014

`

CONTENTS• River Water Resource: Management and Conservation • LakePreservation in Urban Growth Centres • Municipal Water Treatment• Water Conveyance Systems: Design Approach, Challenges andTrends • Point of Use Water Treatment Technologies • Water TariffStructures •Sustainable Water Management in View of LeedRequirements •Waste Water Conveyance System • Overview of SewerRehabilitation Techniques • Waste Water Treatment: Overview andComparison • Low Cost Sanitation Technologies • Effective ArtificialRechargingMethods/Techniques • Public Private Partnerships in Waterand Wastewater Sector: Role, Framework and Challenges• Administrative, Policy and Legal Framework for Water andWastewater Projects in India •Annexures • Index.

CONTENTS• Introduction • The Earth • Geological Work of Natural Agencies• Geological Work of Water • Geological Work of Glaciers • StructuralFeatures of Rocks • Structural Features of Rocks • PhysiographicFeatures • The Study of Minerals • The Study of Minerals • The Study ofMinerals • Study of Rocks • Study of Rocks • Study of Rocks• Economic Mineral Deposits • Stratigraphy of India • EngineeringProperties of Rocks • Groundwater • Earthquakes • Mass Movements• Soils • Geological Investigations • Dams and Reservoirs • Tunnels andRoad Cuts • Improvement of Sites •Appendix • Index.


Price: 275/-First Edition : 2014

`


By

Shivangi Somvanshi

Dr. Renu Dhupper



`By

Parbin Singh

ByDr. Poonam Ahluwalia

Dr. Arvind K. Nema

S.K. KATARIA & SONS

CIVIL ENGINEERING

CIVILENGINEERING

MATERIALS

Size : 20 × 30/8Pages : 300 Approx.ISBN : 81-88458-69-4

Price : 225/-Reprint : 2014

`

CONTENTS• Building Stones • Clay Products • Limes • Portland Cement• Mortars & Plasters • Concrete • Timber • Ferrous Metals• Non-Ferrous Metals • Paints and Varnishes • Plastics• Miscellaneous Engineering Materials • Index.

By

Parbin Singh

Principles of

TUNNELLING, PORTSAND

HARBOURS

CONTENTSPart-A: Principles of Tunnelling

Part-B: Ports, Harbours and Docks

• Introduction • GeologicalInvestigations • Alignment and Grade • Tunnelling Through Rocks• Mucking and Haulage • Tunnelling Through Soft Ground • TunnelSupport System • Ventilation in Tunnels • Hydropower Tunnels• General Considerations.

• Harbours & Ports(Development & Classification) • Harbour Planning and Layout• Natural Phenomena • Marine Structures • Docks • Essential Facilities• Index.

By

Parbin Singh

STEELTABLES

CONTENTS

Flanges (for using as girders) • Single Joist with Additional Plates on bothFlanges (for using as columns) • Double Joists with Flanges Butting andWelded Toe to Toe (for using as columns) • Double Joists Laced or Battened(for using as columns) • Double Channels with Flanges Butting and WeldedToe to Toe (for using as columns) • Double Channels Laced or Battened (forusing as columns) • Safe Loads for Single Angle Struts-Equal Angles (singlebolted or single riveted end connections) • Safe Loads for SingleAngle Struts-UnequalAngles (Single bolted or single riveted end connections) • Safe loadsfor Single Angle Struts-Equal Angles (double bolted or single riveted endconnections) • Safe Loads for Single Angle Struts-Unequal Angles (doublebolted or double riveted end connections) • Safe Concentric Loads on RolledSteel Column Sections (H-Beams being used as columns) • Safe ConcentricLoads on Channel Sections (being used as columns) • Moment of Inertia oftwo Flanges per centimetre width about the x-x axis • Moment of Intertia ofone web plate about its x-x axis • Preferred Cut Sizes of Structural Timber forRoof Tissues (3 to 20 m) • Safe Permissible Stresses for Indian Timbers(Standard Grade) • Reinforcement Percentage & Moment Factor for Beams(Singly reinforced rectangular sections) • Reinforcement Percentage &Moment factor for Beams (Doubly Reinforced Rectangular Sections)• Reinforcement Percentage & Moment Factor for Beams (Singly ReinforcedT-sections) • Recommended Clear Span to Effective Depth Ratios in Beams• Moment Capacity and Steel Area (Singly Reinforced Rectangular Sections)• Additional Moment Carrying Capacity (Doubly Reinforced RectangularSections) • Moment Capacity (Per metre flange width of T-beam) • ShearCapacity of Concrete • Strength of Shear Reinforcement (Two Leg Verticalstirrups 10 mm Diameter) • Strength of Shear Reinforcement (Bent up bars)• Clear Span to Effective Depth Ratios in Slabs (Recommended values)• Minimum Reinforcement in Slabs • Reinforcement Factor for Slabs (Permetre width of slabs) • Moment Capacity (per metre width of two way slabs)• Annexure I: S.I. Units for Structural Engineers • Annexure II: Conversionfactors for S.I. Units • Annexure III: Conversion Table kgf to newtons• Annexure IV: Conversion table newtons to kgf • Annexure V: Guidelines fordetailing of members.

ByS. VizraniR. Sood

5



`

(MKS & SI Units)

• Symbols • Tables • Round Bars • Square Bars • Strips • Mild Steel Flats(Cross-sectional Area) • Mild Steel Flats (Weight) • Plates (Surface Area)• Plates (Weights of 5 mm Plates) • Plates (Weights of 6 mm Plates) • Plates(Weights of 8 mm Plates) • Plates (Weights of 10 mm Plates)• Plates (Weights of 12 mm Plates) • Plates (Weights of 14 mm Plates)• Plates (Weights of 18 mm Plates) • Plates (Weights of 22 mm Plates)• Sheets • Rolled SteelAngles Equal in Size • Rolled SteelAngles Unequal inSize • Rolled Steel Tee Bars • Rolled Steel Beams • Rolled Steel Channels• Areas of Round Bars in Per Metre Width of Slabs for Different Spacings•Areas of Groups of Round Bars • Reduction forArea for Rivet Holes • RivetGauge Distances in Legs inAngles • Properties of Two EqualAngles Back toBack • Properties of Two Unequal Angles (Longer Legs Back to Back)• Properties of Two UnequalAngles (Shorter Legs Back to Back) • Propertiesof Starred Angles (Two Equal Angles Starred) • Properties of Starred Angles(Two Unequal Angles Starred) • Single Joist With Additional Plates on bothFlanges (for using as girders) • Single Joist with Channel and Plates on both



`

CIVIL ENGINEERING

CONSTRUCTIONMANAGEMENT AND

P.W.D. ACCOUNTS(S.I. Units)

Size: 23 × 36/16Pages: 440 ApproxISBN: 978-93-5014-259-2

Price: 165/-Revised Edition: 2015

`

CONTENTSPart-I: Construction Management

Part-II: Construction Equipment

Part-III: P.W.D. Accounts

• Introduction • ConstructionPlanning • Organization • Site Organization • Construction Labour• Control of Progress • Inspection and Quality Control • Accidents andSafety in Construction.

• Introduction — Choice ofConstruction Equipment • Tractors, Bulldozers, Scraper and EarthLoader • Shovels, Draglines and Clamsheels • Trenching Machine andCranes.

• Introduction • Organization of PublicWork Department • Out Line of P.W.D. System of Accounts• Cash • Stores • Works • Payment for Works • Duties of a JuniorEngineer or Sectional Officer and S.D.E. • EntrepreneurshipDevelopment •Model Test Papers.By

D. Lal

WATER SUPPLY &WASTE WATERENGINEERING

CONTENTSPart-I: Water Supply Engineering

Part-II: Waste Water Engineering

• Introduction • Quantity of Water• Sources of Water • Quality of Water • Water Treatment • Conveyanceof Water • Laying Out Pipes • Building Water Supply • Water PollutionControl and Management • Multiple Choice Objective Type Questions.

• Introduction • Quantity ofSewage • Sewerage System • Laying and Construction of Sewers• Quality of Sewage • Natural Methods of Sewage Disposal • SewageTreatment • Activated Sludge Process • Building Drainage • RuralSanitation • Maintenance • Multiple Choice Objective Type Questions• Experiments •Appendix.

ByD. Lal

A.K. Upadhyay

TRANSPORTATIONENGINEERING

Size: 20 × 26/8Pages: 375 ApproxISBN 13: 978-81-85749-63-1ISBN 10: 81-85749-63-9


`

CONTENTSPart-A: Highways

Part-B: Railways

Part-C: BridgesPart-D: Tunnels

• Introduction • Road Geometrics • HighwaySurveys and Plans • Road Materials • Road Pavements • Hill Roads• Road Drainage • Road Maintenance • Traffic Engineering• Construction Equipment • RoadsideAboriculture.

• Introduction • Alignment and Survey • PermanentWay • Rails • Sleepers • Ballast • Fixtures and Fastenings • TracksGeometrics • Points and Crossings • Stations andYards • Signalling.

• Bridges• Tunnels • Experiments • Index.

By

A.K. Upadhyay

Size: 20 × 30/8Pages: 450 ApproxISBN 13: 978-93-5014-406-0ISBN 10: 81-85749-54-X


`

CONTENTS• Introduction • Laws of Force • Moment • Friction • Centre of Gravity• Moment of Inertia • Laws of Motion • Motion of Connected Bodies• Circular Motion • Simple Lifting Machines • Laboratory Experiments• PreviousYear Question Papers • Index.

APPLIEDMECHANICS



`

By

A.K. Upadhyay


S.K. KATARIA & SONS

CIVIL ENGINEERING

FLUIDMECHANICS

(HYDRAULICS)



`

CONTENTS• Introduction • Properties of Fluids • Static Pressure• Measurement of Pressure • Fundamentals of Fluid Flow • FlowMeasurement • Orifice and Mouthpiece • Flow Through Pipes• Flow Through Open Channels • Hydraulic Turbines• Hydraulic Pumps • Hydraulic Devices • Experiments • Index.

By

A.K. Upadhyay

HYDRAULICS ANDPNEUMATICS

CONTENTS• Introduction • Properties of Fluids • Hydrostatic Pressure• Measurement of Pressure • Fundamental of Fluid Flow • Orifice andMouthpiece • Flow Through Pipes • Flow Measurement • HydraulicTurbines • Hydraulic Pumps • Hydraulic Devices • Introduction to OilPower Hydraulics and Pneumatics • Components of Hydraulic System• Components of Pneumatic System • Experiments • Index.

By

A.K. Upadhyay

CIVIL ESTIMATINGAND COSTING

(Including Quality SurveyingTendering and Valuation)



`

CONTENTS• Estimating and Costing • Building Estimates • Reinforced CementConcrete Work (R.C.C. Work) • Analysis of Rates • Earthwork inIrrigation Channel and Roads • Retaining Walls and Roads • PublicHealth Engineering • Valuation • Contracting • Billing • Index.

ByA.K. Upadhyay



`

CONTENTS• Introduction • Physical Properties of Solids • Soil Classification andIdentification • Flow of Water Through Soil (Permeability) • EffectiveStress • Deformation of Soils • Strength Characteristics of Soils• Compaction • Bearing Capacity • Soil Exploration • FoundationEngineering • Laboratory Experiments •Appendices • Index.

SOIL ANDFOUNDATIONENGINEERING

7



`

By

A.K. Upadhyay

CIVIL ENGINEERING

STRUCTURALMECHANICS



`

CONTENTS• Properties of Materials • Stresses and Strains • Shear Force andBending Moment • Centre of Gravity • Moment of Intertia • Bendingand Shear Stresses • Slope and Deflection • Columns and Struts• Combined Direct and Bending Stress • Analysis of Trusses• Experiments • PreviousYear Question Papers • Index.

By

A.K. Upadhyay

STRENGTHOF

MATERIALS

CONTENTS• Properties of Materials • Stresses and Strains • Shear Force andBending Moment • Centre of Gravity • Moment of Inertia • Bending andShear Stresses • Slope and Deflection • Columns and Struts • CombinedDirect and Bending Stress • Torsion • Springs • Experiments • Index.

ByA.K. Upadhyay

STEELSTRUCTURES(Design and Drawing)



`

CONTENTS• Introduction • Riveted Connections • Welded Connections • TensionMember • Compression Member (Struts) • Columns • Beams • RoofTrusses • Steel Drawings •Appendix • Question Paper • Index.

By

A.K. Upadhyay



`

CONTENTS• Introduction • Road Geometrics • Highway Surveys and Plans • RoadMaterials • Road Pavements • Hill Roads • Road Drainage • RoadMaintenance • Traffic Engineering • Construction Equipment• Roadside Arboriculture • Airport Engineering • Experiments• PreviousYear Question Papers • Index.

HIGHWAYENGINEERING



`

By

A.K. Upadhyay


S.K. KATARIA & SONS

CIVIL ENGINEERING

RAILWAYS, BRIDGESAND TUNNELS


Price : 165/-Second Edition : 2014

`

CONTENTSPart A: Railways

Part B: Bridges

Part C: Tunnels

• Introduction • Alignment and Survey • PermanentWay • Rails • Sleepers • Ballast • Fixtures and Fastenings • TrackGeometrics • Points and Crossings • Stations and Yards • Signalling• Track Laying • Maintenance of Track.

• Introduction • Classification of Bridges • Site-selection Investigations and Collections of Data • Foundation • Piers,Abutments and Wing Walls • Bridge Bearings • Temporary Bridges• Permanent Bridges • Construction and Numbering of Bridges• Maintenance of Bridges.

• Introduction • Tunnelling Experiments • PreviousYear Question Papers • Index.

By

A.K. Upadhyay

EARTHQUAKERESISTANTBUILDING

CONSTRUCTION

CONTENTS• Engineering Seismology • Structural Dynamics • SeismicPerformance of Traditionally Built Constructions • Introduction toSeismic Design Codes : IS 4326:1993 and IS 13828:1993 • SeismicPerformance of Reinforced Concrete Buildings • Ductile Detailing ofReinforced Concrete Buildings (IS 13920:1993) • Introduction to IS1893 (Part 1): 2002 • Seismic Provisions of Strengthening andRetrofitting • Disaster Management • Annexure : Special ConstructionMethodologies-Smart Buildings • Model Question Papers• Examination Paper • References • Index.

By

Neelam Sharma

R.C.C.DESIGN & DRAWING



`

CONTENTSPart-I: R.C.C. Design

Part-II: Prestressed ConcretePart-III: R.C.C. Drawings

• Introduction • Introduction to Working StressMethod (Theory of R.C.C. Beams) • Shear and Bond • Introduction toLimit State Method • Limit State of Collapse : Flexure and Shear • Designof Singly Reinforced Beams • Doubly Reinforced Beams • T-Beams• One Way Slab • Two Way Slab • Columns • Footings • Design of Stairs.

• Prestressed Concrete.• R.C.C. Drawings • Appendix: Use of

DesignAids • Solved Question Paper • Index.

ByNeelam Sharma



`

CONTENTS• Introduction • Foundations • Walls • Brick Masonary • StoneMasonary • Lintels and Arches • Doors and Windows • Damp Proofingand Water Proofing • Floors • Roof • Stairs • Surface Finishes • Conceptof Seismic Planning of Buildings • Building Planning • Anti-termiteTreatment in Buildings • Examination Papers • Index.

BUILDINGCONSTRUCTION

9



`

By

Neelam Sharma

CIVIL ENGINEERING

REINFORCEDCEMENT

CONCRETE DESIGN



`

CONTENTS• Introduction • Working Stress Method of Design • Introduction toLimit State Method of Design • Limit State of Collapse: Flexure • LimitState of Collapse: Shear and Bond • Design of Singly Reinforced Beams• Design of Doubly Reinforced Beams • T Beams • Design of Torsion• Limit State of Serviceability • One Way Slab • Two Way Slab• Columns • Foundations • Staircase • Retaining Walls • Flat Slab • YieldLine Theory of Slabs • Continuous Beams • Beams Curved in Plan• Slab Culvert • Design of Water Tank • Introduction to PrestressedConcrete • Index.

By

Neelam Sharma

Fundamentals of

STRUCTURALANALYSIS

CONTENTSPart I

Part II

• Introduction • Statically Determinate and Indeterminate Structures• Stress and Strains • Bending Stresses in Beams • Columns and Struts• Deflection of Beams • Principle of Virtual Work Done.

• Strain Energy Concept–Indeterminate Structures • Slope DeflectionMethod • Moment Distribution Method • Three Hinged Arch • ShearForce and Bending Moment in Beams and Frames • UnsymmetricalBending • Cables and Suspension Bridges • Analysis of StaticallyDeterminate Trusses/Frames • Theorem of Three Moments • GravityDams • Two HingedArch • Useful-Data • Index.

ByM.K. Pant

Elements of

BRIDGEENGINEERING



`

CONTENTS• Introduction • Standard Specifications for the Road Bridges • DesignConsiderations of R.C.C. Bridges • Box-Culverts • Steel Bridges • SteelTrussed Bridges • Bridge Foundations • Design of Piers and Abutments• Wing Walls and Approaches • Bridge Bearings • Arch Bridges• Suspension Bridges • Prestressed Concrete Bridge Decks• Maintenance and Inspection of Bridges • Composite Bridges • RecentTrends in Bridge Engineering • Miscellaneous Data • References• Index.

By

M.K. Pant



`

CONTENTS• Surveying • Building Materials • Building Construction • Estimatingand Costing • Strength of Materials • Applied Mechanics • FluidMechanics and Hydraulic Machines • Soil Mechanics and FoundationEngineering • Hydrology and Water Resources Engineering • StructuralAnalysis • Design of R.C.C. and Masonry Structures • Design of SteelStructures • Transportation Engineering-I (Railway) • TransportationEngineering-II (Highways, Airports and Harbours) • EnvironmentalEngineering-I (Water Supply) • Environmental Engineering-II(Sewerage Treatment and Disposal and Air and Water Pollution andControl) • Construction Practice, Planning and Management• Computer Programming.

Question Bank in

(Including Theory of Chaptersand more than 15,000 ObjectiveType Questions and Answers)

CIVIL ENGINEERING



`


ByV.S. Murthy

R. Sood

S.K. KATARIA & SONS

CIVIL ENGINEERING

Objectives in

(With more than 15,000Objective Type Questions and

Answers)

CIVIL ENGINEERING



`

CONTENTS• Surveying • Building Materials • Building Construction • Estimatingand Costing • Strength of Materials • Applied Mechanics • FluidMechanics and Hydraulic Machines • Soil Mechanics and FoundationEngineering • Hydrology and Water Resources Engineering • StructuralAnalysis • Design of R.C.C. and Masonry Structures • Design of SteelStructures • Transportation Engineering-I (Railway) • TransportationEngineering-II (Highways, Airports and Harbours) •EnvironmentalEngineering-I (Water Supply) • Environmental Engineering-II(Sewerage Treatment and Disposal and Air and Water Pollution andControl) • Construction Practice, Planning and Management• Computer Programming.

ByV.S. Murthy

R. Sood

STRENGTHOF

MATERIALS

CONTENTS• Stresses and Strains • Principal Stresses • Impact Loads and Resilience• Centroid and Moment of Inertia • Shear Force and Bending Moment• Stresses in Beams • Slope and Deflection • Propped Cantilevers andBeams • Fixed Beams • Continuous Beams • Combined Direct andBending Stresses • Columns and Struts • Determinate Frames • ThinCylindrical Shells • Thick Cylindrical Shells • Torsion • Springs• Bending of Curved Bars • Unsymmetrical Bending • Theories ofElastic Failure • Index.

By

Surendra Singh

Design of

STEELSTRUCTURES



`

CONTENTS• Introduction • Simple Connections-Riveted, Bolted and PinnedConnections • Welding and Welded Connections • Tension Members• Design of Compression Members • Design of Beams • Design of PlateGirders • Design of Gantry Girder • Design of Roof Trusses • PlasticAnalysis • Index.

ByDr. Narayan R. Chandak

Size : 20 × 26/8Pages : 300 Approx.ISBN 13 : 978-93-5014-401-5


`

CONTENTS• Introduction to Open Channel Flow • Uniform Flow in Open Channel• Gradually Varied Flow • Rapidly Varied Flow • Mobile Bed ChannelHydraulics • Hydraulic Mahcines • Experiments • Examination Papers• References • Index.

HYDRAULICSAND

HYDRAULICMACHINES

11



`

By

Annu Pandey

CIVIL ENGINEERING

HYDRAULICSAND

HYDRAULICMACHINES



`

CONTENTS• Introduction to Open Channel Flow and Specific Energy• Uniform Flow through Open Channel • Gradually Varied Flow• Rapidly Varied Flow and Hydraulic Jump • Hydraulic Machines• Mobile Bed Channel Hydraulics • Objective Type Questions• PreviousYear Question Papers • Index.

By

Mohd. Umar Khan

BUILDINGMATERIALS ANDCONSTRUCTION

CONTENTS• Classification of Materials • Stones • Bricks and Tiles • Cement• Concrete • Mortars • Lime • Gypsum • Pozzolanas • Asphalt, Bitumenand Tar • Timber • Plastics • Paints, Distempers and Varnishes• Plastering and Pointing • Ferrous and Non-Ferrous Metals • Glass• Sound Insulation and Acoustics • Damp Proofing and TermiteTreatment • Foundation • Partition Walls • Ground and Upper Floor• Stairs • Doors and Windows • Roofs • Lintels and Arches • Ventilationand Air Conditioning • Plumbing Services and Electricity • ThermalInsulation and Fire Protection • Experiments • Model Papers • Index.

BySaurabh K. Soni

ENVIRONMENTALENGINEERING-I



`

CONTENTS• Water Demand and Domestic Use • Transmission of Water • Storageand Distribution of Water • Waste Water Collection • Multiple ChoiceQuestions • Appendices • Previous Year Question Papers (Unsolved)• Index.

By

Saurabh K. Soni



`

CONTENTS• Water and Wastewater Characteristics • Sedimentation • Filtration andDisinfection • Wastewater Treatment • Anaerobic Digestion• Experiments/ Practicals •Appendices • Previous Year Question Papers• Index.

ENVIRONMENTALENGINEERING-II

Size : 20 × 30/8Pages : 500 Approx.ISBN: 978-93-5014-457-2


`

By

Saurabh K. Soni


S.K. KATARIA & SONS

CIVIL ENGINEERING

GEOTECHNICALENGINEERING

(Soil Mechanics)



`

CONTENTS• Soil Formation • Soil Composition • Index Properties of Soil• Classification of Soil • Clay Mineralogy and Soil Structure• Soil Water System • Permeability • Seepage Analysis • StressDistribution in Soil Mass • Compaction • Consolidation of Soil• Shear Strength of Soil • Earth Pressure and Retaining Walls• Soil Exploration • Foundation • Bearing Capacity of ShallowFoundations • Experiments • Model Question Papers • Index.

By

Saurabh K. Soni

CONSTRUCTIONMANAGEMENT

AND EQUIPMENT

CONTENTS• Evolution of Management Thought • Meaning and Nature ofManagement • Introduction to Construction Management • NetworkTechniques • Contract Management • Tender • Human ResourceManagement • Cost Control • Quality Control in Construction• Resource Allocation • Construction Accounts Management• Construction Equipment • Maintenance of Equipment • SafetyManagement • Computerisation • Construction Disputes and TheirSettlement • Remote Sensing, GPS and GIS • Environmental Issues inConstruction •Appendices • Index.

By

Saurabh K. Soni

SURVEYING-I



`

CONTENTS

BySaurabh K. Soni



`

CONTENTSSURVEYING-II

13



`

By

Saurabh K. Soni

SURVEYING-II

Saurabh K. Soni

Releasing Shortly

Releasing Shortly

CIVIL ENGINEERING

HIGHWAYENGINEERING



`

CONTENTS• Transportation Engineering • Traffic Engineering • Design ofHighway Pavement • Geometric Design of Highways • RoadConstruction Methods • Highway Materials and Testing• Maintenance of Highways • Highway Alignment and Survey• Highway Drainage • Design of Hill Roads • Soil Stabilized Roads• Highway Economics • Road Safety Audit • Landscaping of Highways• Highway Making Machineries • Model Test Papers • Index.

By

Alok Kr. Goel

IRRIGATIONENGINEERING &

HYDRAULICSTRUCTURES

CONTENTSPart-I : Irr igat ion Engineering and Management of Irr igat ion Water

Part-II: Ground Water Engineering and Irrigation by Wells

Part-III: Headworks and Canal Structures

Part-IV: Engineering Hydrology

Part-V: Reservoirs and Storage Dams

• Introduction • Principles of Water Management-Soils-Water-Crops and Their Relationship (I)• Soils-Water-Crops and Their Relationship (II) (Water Requirements of Crops) • Flow or CanalIrrigation • Design of Irrigation Canals (On Alluvial and Non-Alluvial Soils) • Construction andMaintenance of Irrigation Canals • Losses in Canals and Lining of Irrigation Canals (Design ofLined Canals) • Methods of Irrigation • Water-Logging and its Remedies (Including Drainage andConjunctive Use of Surface and Ground Water) • Irrigation Water Management • Tank Irrigation• Sprinkler Irrigation Micro Irrigation (I) • Drip Irrigation Micro Irrigation (II) • Investigation andPreparation of Irrigation Projects • Important Irrigation Projects (ConstructedAfter Independence).

• Fundamentals of Ground Water• Hydraulics of Wells • Tube Well Irrigation • Open Well Irrigation • Techniques of Ground WaterDevelopment • Ground Water Quality. • Rivers theirBehaviour and Training • Canal Headworks • Weirs on Permeable Foundation • Canal Regulators• Falls (Drops) and Flumes • Cross Drainage Works • Structures for Silt Control • Outlets and TailClusters. • Elements of Hydrology • Precipitation and itsMeasurement • Water Losses (Interception, Infiltration and Evaporation) • Stream Gauging• Runoff • Estimation of Peak Flow and Flood Routing.• Reservoirs and Their Regulation • Types of Dams and Foundation Treatment • Gravity Dams•Arch and Buttress Dams • Earth and Rockfill Dams • Spillways, Sluices and Crest Gates (IncludingEnergy Dissipators) • Hydropower Stations •Appendices • Index.

ByS.R. Sahasrabudhe

WATERRESOURCES

ENGINEERING



`

CONTENTS• Elements of Hydrology • Precipitation and its Measurement• Interception, Infiltration and Evaporation • Surface Runoff • PeakFlow and its Estimation • Irrigation Development in India • WaterRequirement of Crops • Canal Irrigation • Design of Irrigation Canals(On Alluvial and Non-Alluvial Soils) • Lining of Irrigation Canals(Design of Lined Canals) • Waterlogging and its Remedies (IncludingDrainage and Conjunctive Use of Surface and Groundwater)• Regulation and Control of Canal System • Regulation and Control ofCanal System • Irrigation Outlets • River Training • Measurement ofRiver Discharge • Fundamentals of Groundwater • Open Well Irrigation• Tube Well Irrigation • Design of Diversion Headworks and OtherRegulatory Structures • Hydropower Stations • Index.

By

S.R. Sahasrabudhe



`

CONTENTS• Introduction • Soils and Crops • Water Requirement of Crops• Hydrology (Rainfall and Run-off) • Methods of Irrigation • Canal(Flow) Irrigation • Design of Irrigation Canal • Open Well Irrigation• Tube Well Irrigation • Tank Irrigation • Sprinkler Irrigation • DripIrrigation • Gravity Dams • Earth Dams and Spillways • Canal HeadWorks • Cross Drainage Works • Regulatory Hydraulic Structures• River Training Works • Water-logging and Drainage • Hydro PowerStations • Investigation and Preparation of Irrigation Projects•Annexure • Index.

A Textbook of

IRRIGATIONENGINEERING



`

By

S.R. Sahasrabudhe


S.K. KATARIA & SONS

CIVIL ENGINEERING

INDUSTRIALWASTE

TREATMENTTECHNOLOGY



`

CONTENTS• Groundwater • Distillery Industry • Dyes and Dye IntermediatesIndustry • Textile Industry • Waste to Energy Techniques • ElectronicWaste Treatment • Glass Industry • Pharmaceutical Industry • SugarIndustry • Cosmetics Industry • Index.

ByDr. Ahmad Ashfaq

Introduction to

ARCHITECTUREAND

TOWN PLANNINGWITH

VASTU SHASTRA

CONTENTS

PartA:Architecture and Town Planning

Part B: Vastu Shastra

• Historical Background of Town Planning • Town Planning (Rural andUrban) • Principles of Town Planning • Concepts of Town Planning• Brief History of Architecture • Architectural Planning • Principles ofArchitecture • Drawings.

• Tips of Vastu Shastra • Typical Word-Meanings • Abbreviations• Examination Papers • Index.

By

Er. R.P. Singh Kushwah

Design of

CONCRETESTRUCTURES-I



`

CONTENTS• Materials (Cement, Concrete and Steel) • Working Stress Method• Limit State Method • Shear, Bond Development Length and Torsion• Design of Beams • Design of Slabs • Column • Stair Case • Foundation• Solved Examination Paper • Index.

BySujeet Kumar


Price :First Edition : 2015

` 250/-

CONTENTSDesign of

CONCRETESTRUCTURE-II

15



`

By

Sujeet Kumar

Releasing Shortly

CIVIL ENGINEERING

IRRIGATIONENGINEERING

ANDHYDRAULIC

STRUCTURES



`

CONTENTS• Canals and Related Problems • Design of Stable Channels• Water Requirements of Crops • Flow Irrigation • Furrow IrrigationSystem • Sprinkler Irrigation • Cross Drainage Works • Hydrodynamicsof Water Flow in Irrigation Bays • Canal Falls • Canal Regulation• Canal Outlets • Geomorphic Cycle • Hydraulic Jump and its Role in theDesign of Irrigation Structures • Spillway • River Training • HeadWorks • Fluvial Hydraulics •Stream Flow Measurement • Gravity andEarth Dam • Economics of Project • Water Power Engineering • PowerHouse • Advance of Water Front • Important Irrigation Projects of India• Index.

By

Dr. V.C. Agarwal

A Textbook of

With Experiments


CONTENTS• Multidisciplinary Nature of Environmental Studies • Ecosystems• Biodiversity and its Conservation • Natural Resources: Problems andProspects • Green Technology and Green Chemistry • Eco-FriendlyPolymers • Environmental Biotechnology • Environmental Pollution-I•Environmental Pollution-II • Chemical Toxicology • DisasterManagement• Social Issues, Human Population and the Environment• Environmental Management Systems • Experiments • Index.

ByDr. Ranu Gadi

Dr. Sunita RattanDr. Sushmita Mohapatra

FLUID MECHANICSAND

PNEUMATICS

Size: 23 × 36/16Pages: 450 Approx


`

CONTENTS• Introduction • Properties of Fluids • Hydrostatic Pressure• Measurement of Pressure • Fundamentals of Flow • Orifices • FlowThrough Pipes • Hydraulic Devices • Hydraulic Turbines • Pumps• Flow Measurement • Oil Power Hydraulics and Pneumatics• Components of Hydraulic System • Components of Pneumatic System• Experiments • Index.

ByA.K. Choudhary

Om Prakash

Size : 23 × 36/16Pages : 425 approx.ISBN : 81-85749-66-3


`

CONTENTS• Introduction • Properties of Fluids • Hydrostatic Pressure • Measurement ofPressure • Fundamentals of Flow • Orifices • Flow Through Pipes • FlowThrough Open Channels • Flow Measurement • Pumps and Turbines• Experiments.

HYDRAULICS



`

By

ChoudharyPrakash


S.K. KATARIA & SONS 17

Fundamentals of

CONSTRUCTIONPLANNING &

MANAGEMENT


Price : 220/-Second Edition : 2015

`

CONTENTS• Introduction • Engineering Contracts and Arbitration • ConstructionPlanning • Construction Organization • Network Technologies forProject Management-PERT • Critical Path Method • Cost TimeBalancing • Inspection and Quality Control • Selection andPerformance of Construction Equipment • Equipments for ConcreteConstruction and Excavation • Equipment for Pumping Water • Pilesand Pile-Driving Equipment • Foundation Grouting Equipments• Production of Crushed Stone Aggregates • Tunneling Equipment• Examination Papers • Index.

ByDr. M.R. Sharma

CONCRETETECHNOLOGY

CONTENTS

ByVipin Kumar

GEOTECHNICALENGINEERING AND

FOUNDATIONDESIGN

(Soil Mechanics)



`

CONTENTS

ByJitendra Chaudhary


Price 250/-First Edition : 2015

: `

Releasing Shortly

Releasing Shortly

CIVIL ENGINEERING


TRAFFIC DESIGN



`

CONTENTS

• Introduction • Basic Theory of Traffic Design • Traffic Problems andFeature Analysis • Basis and Conditions of Traffic Design• Traffic Design of Urban Road • Bus Traffic Design • Hub TrafficDesign • Traffic Design of Parking Lot • Traffic Safety Design• Traffic Language System Design •Assessment andAnalysis of TrafficDesign Technology • References • Introduction toAuthors • Index.

By

Yang Xiaoguang

HIGHWAYLANDSCAPE

PLANNING ANDCONSTRUCTION

CONTENTS• Introduction • Highway Landscape Planning’s Basic Principle andMethod • Highway Landscape Construction’s Basic Methods • Routeand Landscape • Highway Road Bed Landscape Construction• Highway Tunnel Landscape Construction • HighwayInterconnection/Crossing Landscape Construction • References• Index.

By

Deng Weidong

ROADECOLOGICALENGINEERING



`

CONTENTS• Introduction • Highway Ecological Engineering Principle • TheProtection and Utilization of Biological Resources • Protection and Useof Soil Near Roads • Vegetation Restoration • Conservation of Waterand Soil • Road Pollution Control • Bibliography • Index.

ByLin Caikui

Zhou XiaohangXia Zhenjun

Size : 20 × 26/8Pages : 450 approx.ISBN : 978-93-5014-583-8


`

CONTENTSCONCEPTUALDESIGN OFBRIDGES



`

By

Xiang Hai Fan

CIVIL ENGINEERING

• Introduction •Aesthetic Bridge Design • Basic Factors to Be Considered in TheConceptual Design • CaseAnalysis of Innovative Ideas in the Conceptual Design• Disaster Prevention and Durability of Bridge Structures • Bridge StructureSystem and Key Mechanics Questions • Solving New Problem in the ConceptualDesign • Conceptual Design of Urban Bridge.


BRIDGE CULTURECONTENTS

REINFORCEDCONCRETE

DESIGN

CONTENTS

By

Birinder Singh

CONTENTS

By

Birinder Singh


Price 250/-: `

(Agency Book)

• Introduction • Design Principles • Behaviour in Flexure (Singly ReinforcedBeams-Rectangular Sections) • Behaviour in Flexure (Doubly ReinforcedBeams Rectangular Sections) • Behaviour in Flexure (T-Beams or FlangedBeams) • Shear and Development Length • Design of Beams • Design of Slabs• Design ofAxially Loaded Columns • Prestressed Concrete.

CIVIL ENGINEERING

• Introduction • Properties of Fluids • Hydrostatic Pressure• Measurement of Pressure • Fundamentals of Fluid Flow • Flowthrough Orifices and Mouthpieces • Flow Measurements • Flowthrough Pipes • Flow thorugh Open Channels • Pumps • Experiments.


Price: 280/-`

(Agency Book)

FLUIDMECHANICS

• Introduction • Functional Planning of Building • Foundation• Masonary • Walls • Scaffolding, Shoring, Underpinning and FormWork • Doors, Windows and Ventilators • Stairs and Stair Cases •Archesand Lintels • Floors-Ground and Upper Flooring • Roofs and RoofCovering • Maintenance of Building • Damp Proofing and WaterProofing • Anti Termite Measures (As per IS 6313-1-111) • SurfaceFinishing • Concepts of Siesmograph Earthquakes Resistance Building• Appendix • Important Questions Answer of Previous YearExaminations.Size: 20 × 30/8

Pages: 375 Approx

Price: 250/-`

(Agency Book)By

Birinder Singh

CONTENTSBUILDING

CONSTRUCTION


Price : 995/-`

Releasing Shortly

Bridge Culture

CIVIL ENGINEERING

REINFORCEDCEMENT

CONCRETEDESIGN


Price : 350/-`

(Agency Book)


Price: 350/-`

(Agency Book)


Price: 180/-`

(Agency Book)

CONTENTS• Introduction • Methods of R.C.C. Design • Theory of R.C.C. Beams(Working Stress Method) • Shear and Development Length (WorkingStress Method) • Design of Singly Reinforced Beams (Working StressMethod) • Doubly Reinforced Beams (Working Stress Method)• Concepts of Limit State Method • Behaviour in Flexure (SingleReinforced Beams-Rectangular Sections), (Limit State Method)• Behaviour in Flexure (Doubly Reinforced Beams-RectangularSections), (Limit State Method) • Behaviour in Flexure (T-Beams orFlanged Beams) (Limit State Method) • Shear and Development Length(Limit State Method) • Design of Beams (Limit State Method) • Designof Slabs (Limit State Method) • Design of Axially Loaded Columns(Limit State Method) • Footings • Design of R.C.C. Stairs • PrestressedConcrete • Index.By

Birinder Singh

ByBirinder Singh

STEELSTRUCTURES

DESIGN ANDDRAWING

CONTENTSPart-I: Theory and Design of Steel Structures

Part-II: Drawing of Steel StructuresPart-III: Useful Tables

• Structural Steel and Sections • Structural Steel Connections (RivetedConnections) • Structural Steel Connections (Welded Connections)• Tension Members • Compression Members (Struts) • Roof Trusses• Columns • Beams.

•Appendices.

• Introduction • Ingredients of Concrete • Water-Cement Ratio• Workability of Concrete • Properties of Concrete • Proportioning ofNormal Concrete • Admixtures • Special Concretes • ConcretingOperations • Non-destructive Tests • Experiments.

• Properties of Materials (PM) • Stresses and Strain (SS) • Shear Forceand Bending Moment (SFBM) • Moment of Inertia (MOI) • BendingStresses in Beams (BSB) • Combined Direct and Bending Stresses(CDBS) • Columns and Struts (CS) • Thin Cylindrical Shells (TCS)• Strain Energy (Resilience) (SE) • Torsion of Shafts (TS) • Springs(SPG) • Experiments.

CONCRETETECHNOLOGY

CONTENTS

ByBirinder Singh

CONTENTSSTRENGTH OFMATERIALS

(Mechanics of Solids)

ByBirinder Singh

Two Colours Edition


Price 180/-: `

(Agency Book)


CIVIL ENGINEERING

STRUCTURALMECHANICS


Price: 250/-`

(Agency Book)

CONTENTS• Properties of Materials (PM) • Stresses and Strain (SS) • Shear Forceand Bending Moment (SFBM) • Moment of Inertia (MOI) • BendingStresses in Beams (BSB) • Combined Direct and Bending Stresses(CDBS) • Dams and Retaining Walls (DRW) • Shear Stresses in Beams(SSB) • Columns and Struts (CS) • Slope and Deflection (SD) •Analysisof Trusses (AT) • Experiments.

By

Birinder Singh

Fundamentals of

APPLIEDMECHANICS

CONTENTS• Basic Concepts (BC) • Laws of Forces (LOF) • Moments and theirApplications (MMT) • Centre of Gravity (CG) • Friction (FRN) • Lawsof Motion (LOM) • Simple Lifting Machines (SLM) • Moment ofInertia • Experiments.

By

Birinder Singh


Price: 280/-`

(Agency Book)


MECHANICAL ENGINEERING

THERMAL SCIENCEAND

ENGINEERING



`

CONTENTS• Basic Concepts & Definitions • Temperature and Zeroth Law ofThermodynamics • Transient Energies : Work and Heat • Ideal Gasesand Their Basic Laws • First Law of Thermodynamics • Steady FlowEnergy Equation (Flow Processes and Ist Law) • Second Law ofThermodynamics • Entropy • Availability and Irreversibility • Mixtureof Gases • Thermodynamic Relations • Gas Power Cycle • InternalCombustion Engines • Steam and its Properties • ThermodynamicVapour Cycles • Refrigeration Systems and Psychrometry • Fuels andCombustion • Thermodynamics of Fluid Flow (One-Dimensional)•Appendix • Multiple Choice Questions • Index.

By

Dr. D.S. Kumar

FLUID MECHANICSAND FLUID POWER

ENGINEERING

CONTENTS• Introduction • Physical Properties of Fluids • Fluid Statics • FluidKinematics • Fluid Dynamics (Momentum and Energy Principles)• Dimensional Analysis and Model Similitude • Potential Flow• Laminar Viscous Flow • Turbulence and Turbulent Flow through Pipes• Laminar and Turbulent Boundary Layer Flows • Flow aroundImmersed Bodies: Drag and Lift • Flow in Open Channels• Compressible Flow • Fluid Measurements • Impact of Free Jets• Hydraulic Turbines • Hydraulic Pumps • Hydraulic Systems• Bibliography • Index.

By

Dr. D. S. Kumar

HEAT & MASSTRANSFER



`

CONTENTS• Definitions and Basic Concepts • Fourier Equation and ThermalConductivity • Steady State Conduction • Conduction with HeatGeneration • Heat Transfer from Extended Surfaces • Transient(Unsteady State) Heat Conduction • Radiation: Processes andProperties • Radiation Exchange between Surfaces • Convection:Process and Properties • DimensionalAnalysis • Empirical Correlationsfor Free and Forced Convection • Hydrodynamic and ThermalBoundary Layers • Condensation and Boiling • Heat Exchangers • MassTransfer •Appendix • Bibliography • Index.

By

Dr. D.S. Kumar



`

CONTENTS• Definitions and Basic Concepts • Fourier Equation and ThermalConductivity • Steady State Conduction • Conduction with HeatGeneration • Heat Transfer from Extended Surfaces • Transient(Unsteady State) Heat Conduction • Radiation: Processes andProperties • Radiation Exchange between Surfaces • Convection:Processes and Properties • Empirical Correlations for free and ForcedConvection • Hydrodynamic and Thermal Boundary Layers• Condensation and Boiling • Heat Exchangers • Mass Transfer• Bibliography • Index.

Basics of

HEAT AND MASSTRANSFER



`

By

Dr. D.S. Kumar

Two Colours Edition

Two Colours Edition



MECHANICALENGINEERING

(Thermodynamics, Som &Mechanics)

With Experiments



`

CONTENTSPart-I: Thermodynamics

Part-II: Properties of Steam and Thermodynamic Cycles

Part-III: Mechanics

Part IV: Strength of Materials

• Basic Concepts & Definitions • Temperature andZeroth Law of Thermodynamics • Transient Energies : Work and Heat • IdealGases and their Basic Laws • First law of Thermodynamics• Steady Flow Energy Equation (Flow Processes and 1st Law) • Second law ofThermodynamics • Entropy •Availability and Irreversibility.

• Steam and itsProperties • Gas Power Cycle • Internal Combustion Engines• Thermodynamic Vapour Cycles.

• Basic Concepts • Co-Planar Forces • Moment of Forceand Parallel Forces • Friction • Shear Force and Bending Moment • Plane Trussesand Frames • Dynamics : Kinematics and Kinetics.

• Simple Stresses and Strains• Compound Stresses and Strains • Bending Stresses in Beams• Torsion of Circular Shafts • Experiments • Previous Years Question Papers •Index.

By

Dr. D. S. Kumar

Basics of

(MDU)


CONTENTS

• Basic Concepts and Laws of Thermodynamics • Steam and itsProperties • Refrigeration Systems and Psychrometry • HydraulicTurbines and Pumps • Power Transmission: Methods and Devices• Stresses and Strains • Basic Machine Tools • Previous Question Paper• Index.

By

Dr. D.S. Kumar

Basics of




`

CONTENTS• Basic Concepts and Laws of Thermodynamics • Steam and itsProperties • Steam Boilers Mountings and Accessories • InternalCombustion Engines • Steam Turbines and Condensers • HydraulicTurbines and Pumps • Power Transmission: Methods and Devices• Stresses and Strains • Shear Force and Bending Moment • Principles ofMechanics • Engineering Materials and Manufacturing Process • Index

ByDr. D.S. Kumar



`

CONTENTS• Engineering Material and their Properties • Measurement andInstrumentation • Basic Machine Tools • Fluid Mechanics • FluidMachines • Basic Concepts and Laws of Thermodynamics • Steam andits Properties • Steam Boilers, Mountings and Accessories • BoilerDraught and Boiler Performance • Refrigeration Systems • SteamEngines • Internal Combustion Engines • Index.

Basics of

(RGTU)




`

By

Dr. D.S. Kumar



BASICMECHANICALENGINEERING



`

CONTENTSSection-A

Section-B

Section-C

Section-D

• Basic Concepts and Definitions • Temperature and Zeroth Law ofThermodynamics • Transient Energies: Work and Heat • Ideal Gasesand their Basic Laws • First Law of Thermodynamics• Steady Flow Energy Equation (Flow Process and Ist Law).

• Second Law of Thermodynamics • Entropy • Availability andIrreversibility • Steam and its Properties.

• Gas Power Cycles • Internal Combustion Engines.

• Psychrometry • Heat Transfer • Fluid Mechanics • Index.

By

Dr. D. S. Kumar

FLUIDMECHANICS

CONTENTS• Introduction • Physical Properties of Fluids • Fluid Statics • FluidKinematics • Fluid Dynamics (Momentum and Energy Principles)• Dimensional Analysis and Model Similitude • Potential Flow• Laminar Viscous Flow • Turbulence and Turbulent Flow through Pipes• Laminar and Turbulent Boundary Layer Flows • Flow AroundImmersed Bodies: Drag and Lift • Fluid Meaurements • Previous YearQuestion Papers • Index.

By

Dr. D.S. Kumar

THERMODYNAMICS



`

CONTENTS• Basic Concepts & Definitions • Temperature and Zeroth Law ofThermodynamics • Transient Energies: Work and Head • Ideal Gasesand their Basic Laws • First Law of Thermodynamics • Steady FlowEnergy Equation (Flow Processes and 1st Law) • Second Law ofThermodynamics • Entropy • Availability and Irreversibility • Mixtureof Gases • Internal Combustion Engines • Steam and its Properties• Thermodynamic Vapour Cycles • Previous Year Question Papers• Index.

By

Dr. D.S. Kumar



`

CONTENTS• Basic Concepts & Laws of Thermodynamics • Steam and its Properties• Vapour Power Cycles • Steam Turbines • Gas Power Cycles and ICEngines • Compressed Air: Positive Displacement and DynamicCompressors • Gas Turbines • Impact of Free Jets • Hydraulic Turbines• Hydraulic Pumps • PreviousYear Question Paper • Index.

THERMAL ANDHYDRAULICMACHINES



`

By

Dr. D.S. Kumar

(HPTU)



Elements of




`

CONTENTSPart-I: Thermodynamics

Part-II: Gas Power Cycles and Internal Combustion IC Engines

Part-III: Centroid, Centre of Gravity and Moment of Inertia

Part-IV: Engineering Materials

• Basic Concepts & Definitions • Temperature and Zeroth Law ofThermodynamics • Transient Energies : Work and Heat • Ideal Gasesand Their Basic Laws • First Law of Thermodynamics • Steady FlowEnergy Equation (Flow Processes and 1st Law) • Second Law ofThermodynamics • Entropy •Availability and Irreversibility .

• Gas Power Cycles • Internal Combustion Engines.

• Centroid and Centre of Gravity • Moment of Inertia:Area and Mass.

• Engineering Materials and Their Properties • Index.

By

Dr. D.S. Kumar

Elements of


CONTENTS• Thermodynamics • Steam and its Properties • Steam Boilers,Mountings and Accessories • Steam Turbines and Condensers • GasPower Cycles • Internal Combustion Engines and Gas Turbines• Refrigeration and Air-Conditioning • Hydraulic Turbines, Pumps andDevices • Lifting Machines • Power Transmission: Methods andDevices • Simple Stresses and Strain • Compound Stresses and Strains• Shear Force and Bending Moment • Previous Year Question Paper• Index.

By

Dr. D.S. Kumar

ENGINEERINGMECHANICS(Statics & Dynamics)



`

CONTENTS• Basic Concepts • Co-Planar Forces • Moment of Force and ParallelForces • Concurrent Forces in Space • Plane Trusses and Frames• Cables and Strings • Centre Points : Centroid and Centre of Gravity• Moment of Inertia : Area and Mass • Friction • Lifting Machines• Shear Force and Bending Moment • Virtual Work • Rectilinear andCurvilinear Motion • Projectiles • Rotation and General Plane Motion• Simple Harmonic Motion and Vibrations • Impact : Collision of ElasticBodies • Kinetics : Impulse, Momentum, Work and Energy • Kinetics ofRotary Motion • Power Transmission : Methods and Devices • Index.

ByDr. D.S. Kumar



`

CONTENTS• Basic Concepts • Co-Plannar Forces • Moment of Force and ParallelForces • Friction • Shear Force and Bending Moment • Plane Trussesand Frams • Centroid and Centre of Gravity • Moment of Inertia: Areaand Mass • Rectilinear Motion • Rotation and General Plane Motion• Kinetics: Impulse, Momentum, Work and Energy • Kinetics of RotaryMotion • Simple Stresses and Strains • Bending Stresses in Beams• Torsion of Circular Shafts • Appendices • Experiments • ObjectiveType Questions • Previous Question Paper • Index.

ENGINEERINGMECHANICS

(With Experiments)


Price: 395/-Third Edition : 2014

`

By

Dr. D.S. Kumar

Two Colours Edition



A Textbook of

ENGINEERINGMECHANICS



`

CONTENTSUnit IUnit II

Unit III •

Unit IV

Unit V

• Basic Concepts • Two-Dimensional Con-current Force Systems.• Two-dimensional Non-Concurrent Force Systems

• Friction • Structure: Trusses and Frames.Centre Points: Centroid and Centre of Gravity

• Moment of Inertia:Area and Mass.• Rectilinear and Curvilinear Motion • Rotation and General

Plane Motion.• Kinetics: Impulse, Momentum, Work and Energy

• Kinetics of Rotary Motion • Virtual Work • Experiments • Index.

By

Dr. D.S. Kumar


(Objective)

CONTENTS• Engineering Mechanics • Strength of Materials • Theory ofMechanisms and Machines • General Metallurgy and EngineeringMaterials • Machine Design • Production Engineering • IndustrialEngineering and Product Management • Measurements andInstrumentation • Basic Thermodynamics • Heat Transfer• Refrigeration and Air-Conditioning • Steam Generation, Engines andTurbines • IC Engines and Automobiles Engineering • Compressors,Gas Turbines and Jet Propulsion • Nuclear Power Plant • FluidMechanics and Hydraulic Machines • Assertion and Reasoning• Practice Papers.

By

Dr. D.S. Kumar

STEAM ANDPOWER

GENERATION



`

CONTENTS• Steam and its Properties • Steam Boilers, Mountings and Accessories• Boiler Draught and Boiler Performance • Vapour Power Cycles• Steam Engines • Flow Through Nozzles • Steam Turbines • SteamCondensers • Fuels and Combustion • Index.

By

Dr. D.S. Kumar



`

CONTENTS• Basic Concepts and Laws of Thermodynamics • Availability andIrreversibility • Thermodynamic Relations • Fuels and Combustion• Steam and its Properties • Steam Boilers, Mountings and Accessories• Boiler Draught and Boiler Performance • Vapour Power Cycles• Steam Engines • Flow Through Nozzles • Steam Turbines • SteamCondensers • Gas Turbines and Jet Propulsion • Index.

APPLIEDTHERMODYNAMICS

Size : 23 × 36/8Pages : 875 Approx.ISBN 13 : 978-93-5014-150-2ISBN 10 : 81-88458-21-X


`

By

Dr. D.S. Kumar

Two Colours Edition



ENGINEERINGTHERMODYNAMICS

(Principles & Practices)



`

CONTENTS• Basic Concepts and Definitions • Temperature and Zeroth Law ofThermodynamics • Transient Energies : Work and Heat • Ideal and RealGases • Mixture of Gases • First Law of Thermodynamics • SteadyFlow Energy Equation (Flow Process and 1st Law) • Second Law ofThermodynamics • Entropy • Availability and Irreversibility• Thermodynamic Relations • Gas Power Cycles • Steam and itsProperties • Steam Boilers, Mountings and Accessories • BoilerDraught and Boiler Performance • Vapour Power Cycles • SteamEngines • Flow through Nozzles • Steam Turbines • Steam Condensers• Compressed Air : Positive Displacement and Dynamic Compressors• Internal Combustion Engines • Gas Turbines and Jet Propulsion• Fuels and Combustion • RefrigerationSystems and Psychrometry• Heat Transfer • Index.By

Dr. D.S. Kumar

AUTOMOBILEENGINEERING

CONTENTS

By

Dr. D.S. Kumar

A Textbook of

MATERIALSCIENCE ANDENGINEERING



`

CONTENTS• Introduction • Structure of Atoms and Molecules • Metals and Alloys• Deformation, Strengthening of Metals and Failure Analysis • HeatTreatment • Ceramic Materials • Electrical Materials • Semiconductors• Electrical Insulating Materials • Dielectrics • Ferroelectric Materials• Magnetic Materials • Polymers, Elastomers and Composites• Construction and Industrial Materials • Miscellaneous Materials• Thermal Properties • Corrosion • Electron Theory of Metals• Diffusion in Solids • Powder Metallurgy • Forming Processes• Universities’ Questions (Latest) with Answers/Solutions Section-A:“Short Answer Questions” Section-B: “Conventional Questions withAnswers/Solutions” • Objective Type Test Questions (with Answers)•Appendices • Index.

ByEr. R.K. Rajput

Size: 20 × 30/8Pages: 875 Approx.ISBN 13: 978-93-5014-285-1ISBN 10: 81-88458-83-X


`

CONTENTS• General Concepts • Static and Dynamic Characteristics of Instruments• Errors in Measurements • Metrology • Sensors and Transducers• Signal Conditioning and Data Transmission • Display Devices andRecorders • Pressure and Flow Measurements • TemperatureMeasurements • Displacement, Velocity, Acceleration, Force, Torqueand Shaft Power Measurement • Miscellaneous Measurements• Mechatronics and Control Systems • Universities Questions (Latest)with Answers/Solutions • Additional Objective Type Questions Bank• Index.

MECHANICALMEASUREMENTS AND

INSTRUMENTATION(Including Metrologyand Control Systems)


Price:First Edition : 2015

`

Two Colours Edition

Two Colours Edition

Two Colours Edition

By

Er. R.K. Rajput


Releasing Shortly


ENGINEERINGMETROLOGY &

INSTRUMENTATION(Including Laboratory Practicals)



`

CONTENTSPart-I: Metrology

Part-II: Instrumentation

• Introduction • Principles of Measuring Instruments • LinearMeasurements • Angular and Taper Measurements • Screw ThreadMeasurements • Gear Measurements • Measurement of Circularity• Comparators • Measurement of Surface Finish • Optical MeasuringDevices • Straightness, Flatness, Squareness and Parallelism • MachineTool Testing • Miscellany.

• Transducers • Measurement of Non-Electrical Quantities• Short Answer Questions • Laboratory Practicals • Objective TypeQuestions Bank • Question Papers • Index.

By

Er. R.K. Rajput

STRENGTH OFMATERIALS

(Mechanics of Solids)(For Polytechnic Students)

CONTENTS• Stress and Strains • Centroid and Moment of Inertia • BendingMoments and Shearing Forces • Bending Stresses in Beams • CombinedDirect and Bending Stresses • Torsion of Circular Shafts • Springs• Resilience • Columns and Struts • Deflection of Beams • ShortAnswerQuestions • Experiments • Solved Question Papers • Index.

By

Er. R.K. Rajput

A Textbook of

REFRIGERATIONAND

AIR-CONDITIONING



`

CONTENTSPart-I: Refrigeration:

Part-II: Air-conditioning:

Part-III: Miscellaney:

• Fundamentals of Refrigeration • Air refrigerationCycles and Systems • Simple Vapour Compression Refrigeration System• Vapour Compression Refrigeration Systems with Multiple Evaporators andCompressor • VapourAbsorption Refrigeration System • Steam Jet RefrigerationSystem • Low Temperature Refrigeration (Cryogenics) • Non-ConventionalRefrigeration Systems • Refrigerants, Driers and Lubricants • Refrigeration,Components and Controls • Defrosting Methods.

• Psychrometrics • Human Comfort • AirConditioning Systems •Air-Conditioning Equipment, Components and Controls• Duct and Air-distribution Systems • Fans • Load Estimation • MeasuringInstruments–Air-Conditioning

• Thermal Insulation • Applications of Refrigeration andAir- Conditioning • Maintenance and Repair of Commercial and DomesticEquipment • Refrigeration and Air-Conditioning Tools • Universities’Questions(Latest) with Solution • Additional Objective Type Questions • Appendices• Refrigeration andAir-conditioning Tables and Charts • Index.

By

Er. R.K. Rajput


Price: 250/-Fifth Edition : 2014

`

CONTENTSPart-I: Refrigeration

Part-II: Air-Conditioning

.Part-III: Miscellaney

• Fundamentals of Refrigeration • Air-RefrigerationCycles and Systems • Simple Vapour Compression Refrigeration System• Vapour Absorption Refrigeration System • Refrigerants, Driers and Lubricants• Refrigeration Components and Controls.

• Psychrometrics • Human Comfort • Air-Conditioning Systems •Air-Conditioning Equipment, Components and Controls• Duct and Air-Distribution Systems • Load Estimation • Measuring InstrumentsAir-Conditioning

• Thermal Insulation • Applications of Refrigeration andAir-Conditioning • Maintenance and Repair of Commercial and DomesticEquipment • Refrigeration andAir-Conditioning Tools • ShortAnswer Questions• Appendices • Refrigeration and Air Conditioning Tables and Charts (IncludingPsychrometric Chart) • Practicals • Index.

A Textbook of

(For Polytechnic Students)

REFRIGERATIONAND

AIR-CONDITIONING



`

By

Er. R.K. Rajput

Two Colours Edition



A Textbook of

MATERIALSCIENCE


Price : 340/-Third Edition: 2014

`

CONTENTSUnit-I •

Unit-II

Unit-III

Unit-IVUnit-V

Introduction: Perspective and Importance of EngineeringMaterials • Atomic Models Periodic Table and Chemical Bonding• Crystallography • Imperfections (Defects) in Solids.

• Mechanical Properties and Testing • MicrostructuralExamination-Identification of Metals and Alloys • Phase Diagram andEquilibrium Diagram.

• Ferrous Metals and Alloys • Heat Treatment • Non-FerrousMetals andAlloys .

• Magnetic Properties • Electric Properties • Diffusion in Solids.• Ceramics • Polymers/Plastics and Composite Materials

• Performance of Materials in Service (Fracture, Fatigue and Corrosionand its Control) • Laboratory Practicals • Short Answer Questions •Question Papers • Index.By

Er. R.K. Rajput

By

Er. R.K. Rajput

Fundamentals of

MATERIALSCIENCE

CONTENTS

A Textbook of

MEASUREMENTS&

METROLOGY



`

CONTENTSPart I : Mechanical Measurement

Part II : Metrology and Inspection

• General Concepts • Sensors and Transducers • Signal Conditioning,Transmission and Processing • Time Related Measurements• Measurement of Pressure • Strain Measurement • Measurement ofForce, Torque, Acceleration and Vibrations • TemperatureMeasurements.

• Introduction to Metrology and Inspection • Linear and AngularMeasurements and Comparators • Measurement of Geometric Forms• Measurement of Screw Threads and Gears • Surface Texture/Finish• Theoretical Questions • Index.

ByEr. R.K. Rajput



`

CONTENTS• General • Structure of Metals and Their Deformation • FerrousMaterials • Non-Ferrous Materials • Engineering Plastics and Fibres•Insulating Materials • Identification and Testing of Metals and Alloys• Fundamentals of Heat Treatment • Metallurgical Considerations• Short Answer Questions • Experiments • Objective Type Questions•Appendices • Index.

MATERIALSCIENCE




`

By

Er. R.K. Rajput

Section-A:

Section-B:

Section-C:

Section-D:

• Crystallography • Imperfections in Metal Crystals.

• Solids Solutions and Phase Diagrams • Heat Treatment.

• Deformation of Metals and Fatigue of Metals.

• Creep and Corrosion • Plastics and Composite Materials • CeramicMaterials • ShortAnswer Questions • Question Papers • Index.



A Textbook of

MACHINEDRAWING



`

CONTENTSManual Drafting Equipment • Conventional Lines, DrawingSheets–Their Layout and Planning • Technical Lettering • Theory ofOrthographics Projections • Theory of Co-ordinate Dimensioning• Isometric Projection • Reading a Drawing Missing Lines and MissingViews • Oblique Projection • Auxiliary Projection • Freehand Drafting• Sections and Conventions • Machining Symbols and Surface Texture• Theory of Conventional Tolerancing • Geometric Dimensioning andTolerancing • Detail &Assembly Drawings- Wooden Joints • Rivets andRiveted Joints • Welds and Welded Joints • Screw Threads and ThreadedFasteners • Keys, Cotters and Joints • Shaft Couplings • Pipe Joints andFittings • Pulleys • Bearings, Hangers and Brackets • Valves and Cocks• Steam Engine Parts • Cams • Toothed Gears • Automotive Parts•Miscellaneous Machine Parts • Index.By

P. S. Gill

ENGINEERINGGRAPHICS &

DRAFTING

CONTENTS• Drawing Instruments • Conventional Lines, Drawing Sheets—TheirLayout and Planning • Technical Lettering • Scales • Loci andMechanisms • Loci-Conic Sections • Cycloidal and Spiral Curves• Helix, Helical Springs and Screw Threads • Projections of Points• Projections of Lines • Projections of Planes and Laminae • AuxiliaryPlanes and Views • Projections of Solids • Sections of Solids• Development of Surfaces • Intersections of Surfaces • IsometricProjection • Theory of Coordinate Dimensioning • Theory ofOrthographic Projections • Reading a Drawing-Missing Lines &Missing Views • Oblique Projection • Perspective Projection • FreehandDrafting • Sections and Conventions • Rivets and Riveted Joints • Weldsand Welded Joints • Screw Threads and Threaded Fasteners • PreviousYears Question Papers.By

P.S. Gill

GEOMETRICDIMENSIONING AND

TOLERANCING(Including Tolerance Strackups)



`

CONTENTSPart-1: Geometric Dimensioning and Tolerancing

Part 2 : Tolerance Stacks

• Theory of Co-ordinate Dimensioning • Machining Symbols andSurface Texture • Theory of Coordinate Tolerancing • Introduction toGeometr ic Dimensioning & Tolerancing • Geometr icTolerancing–Basic Concepts • Datums, Datum Targets & DatumSystem • Tolerances of Form • Orientation Controls • Profile Tolerances• Tolerances of Location • Runout Controls.

• Tolerance Stacks.

By

P.S. Gill



`

CONTENTS• Computer Aided Drafting (CAD) Equipment • Introducing AutoCADand AutoCAD LT • Starting to Draw with AutoCAD & AutoCAD LT• Setup for a New Drawing • Using Commands & Obtaining DrawingInformation • Controlling AutoCAD Drawing Precision • SpecifyingCoordinates • Managing Object Properties • Drawing 2-DimensionalGeometry • Viewing 2D Drawings • Object Selection and Editing withGrips • Editing 2-Dimensional Drawings • Creating Text • DrawingDimensions and Styles • Creating and Editing Hatches • Plotting andPrinting Drawings • Parametric Drawing — Using Constraints• Working with Blocks • Adding Attributes to Blocks • ExternalReferences (XREFS) • Specifying 3D Coordinates • Viewing 3DDrawings • Creating 3D Surfaces • Creating Solids and Editing in 3D• Rendering in 3D • Organizing and Managing Drawings • Index.

COMPUTER AIDEDDRAFTING USING

AUTOCAD 2014



`

By

P. S. Gill



LEARNINGAUTOCAD


Price : 225/-First Edition : 2015

`

CONTENTS• Computer Aided Drafting (CAD) Equipment • Introduction toAutoCAD & AutoCAD LT • Starting to Draw with AutoCAD andAutoCAD LT • Setup for a New Drawing • Specifying Coordinates• Managing Object Properties • Controlling AutoCAD DrawingPrecision • Drawing Two-Dimensioninal (2D) Geometry• Navigating and Managing (2D) Drawing • Editing Two-Dimensional(2D) Drawing • Object Selection Basics in AutoCAD• Text Creation in AutoCAD • Dimensioning Drawings • Creating andEditing Hatches in AutoCAD • Working with Blocks in AutoCAD• Specifying 3D Coordinates • Viewing 3D Drawings in AutoCAD• Creating and Editing 3D Solids • Parametric Drawing-UsingConstraints • Index.

By

P. S. Gill

ENGINEERINGDRAWING

(Geometrical Drawing)

CONTENTS

By

P. S. Gill

A Textbook of

AUTOMOBILEENGINEERING-I



`

CONTENTS• General Principles of Heat Engine Operation • Fundamentals ofElectricity, Magnetism and Electronics • Engine Types & EngineBalance • Constructional Details of Automotive Engines: Structure &Mechanism • Automotive Engine Lubrication • Exhaust System• Engine Cooling System • Fuels & Fuel Supply System of SparkIgnition Engines • Process of Combustion in Spark Ignition Engines• Carburation & Fuel Injection Systems in SI Engines • Ignition Systems• Diesel (Compression Ignition-CI) Engine • Alternate AutomotiveEngines • Turbocharging & Supercharging Systems • IC Engine Testingand Performance • Storage Battery • Starting Systems • ChargingSystem • Engine Emission Control Systems • Bibliography • Papers• Index.

ByP. S. Gill



`

CONTENTS• Automobile: Development, Operation, Components & Types• Clutches • Manual Transmissions • Automatic Transmission andTransaxle Fundamentals • Automotive Torque Converters • Transaxles• Transfer Cases and Four-Wheel Drive Systems • Driveline: UniversalJoints, Differentials, & Driving Axles • The Basic Structure• Syspension Systems • FrontAxle & Steering System • Wheels & Tyres• Brake Systems • Automotive Vehicle Propulsion Performance• Lighting Systems • Safety & Comfort Systems • Accessories• Heating, Ventilation & Air Conditioning • Bibliography • Papers• Index.

A Textbook of

AUTOMOBILEENGINEERING-II



`

By

P. S. Gill

• Manual Drawing Instruments • Conventional Lines, DrawingSheets–Their Layout and Planning • Technical Lettering, Dimensioningand Geometrical Constructions • Scales • Loci and Mechanisms • Loci-Conic Sections • Cycloidal and Spiral Curves • Helix, Helical Springsand Screw Threads • Projections of Points • Projections of Lines• Projections of Planes and Laminae • Auxiliary Planes and Views• Projections of Solids • Sections of Solids • Development of Surfaces• Intersections of Surfaces • Isometric Projection • Theory ofOrthographic Projections • Reading a Drawing–Missing Lines andMissing Views • Oblique Projection • Perspective Projection • Index.



A Textbook of

AUTOMOBILEENGINEERING-III



`

CONTENTS• Tools of Automotive Trade • Fasteners, Gaskets, Seals, Hoses, andBelts • Service Information, Tools and Shop Safety • Cooling andLubrication Systems Diagnosis and Service • Starting and ChargingSystems Diagnosis and Service • Carbureted-fuel-system Diagnosisand Service • Fuel Injection Systems Diagnosis and Service • IgnitionSystems Diagnosis and Service • Engine Condition Diagnosis andTune-up • Engine Performance and Mechanical Problems• Engine Removal, Disassembly and Cleaning • EngineReconditioning–Short Block Service • Engine Reconditioning–TopEnd Service • Front End–Timing Mechanism Service • EngineReassembly–Installation–Break-in • Engine Maintenance andTroubleshooting • Bibliography • Index.

By

P.S. Gill

MATERIALSCIENCE

ENGINEERING

CONTENTS• Introduction–An Overview • Glossary • Structure of Materials-Crystallography • Imperfections in Solid Materials • Diffusion inMaterials • Construction of Alloys and Solid State-Freezing • PlasticDeformation, Cold and Hot Working of Metals and Alloys • PhaseDiagrams • The Iron-Carbon System • Phase Transformations in theIron-Carbon System • Ferrous Metals and theirAlloys • Heat Treatmentof Steel and Wear of Metals • Nonferrous Metals and Alloys • MetalTesting: Mechanical Properties of Metals • Strengthening Mechanismsin Metals • Failure of Metals and Failure Analysis • Ceramic Materials• Structure, Characteristics and Applications of Polymers • CompositeMaterials & Protective Coatings • Adhesives, Insulating, Constructionand Miscellaneous Materials • Corrosion and Degradation of Materials• Electrical Properties of Materials • Magnetic Properties of Materials• Optical Properties of Materials • Index.

By

P.S. Gill

Principles of

POWDERMETALLURGY



`

CONTENTS• Introduction to Powder Metallurgy • Metal Powder Production • MetalPowder Characterization • Alloying Methods and PrecompactionPowder Handling • Compaction, Tooling Design and PressingTechnologies • Sintering of Powder Metallurgy Materials • HighDensity Processing of PM Materials • Design Considerations for PMParts • PM Material Compact Characterization • Secondary Operationsfor PM Parts • PM Material Standards and Designations • Materials forPM Structural Parts • PM Parts Properties and Engineering Information• Powder MetallurgyApplications • Glossary of PM Terms • Referencesand Further Reading • Index.

By

P. S. Gill



`

CONTENTS• Basic Concepts • Centre of Gravity–Centroid • Supports and SupportReactions • Stresses in Plane Framed Structures • Moment, Moment ofInertia–Second Moment of Areas • Bending Moment and Shear ForceDiagrams • Space Frames.

GRAPHICSTATICS



`

By

P.S. Gill



UNCONVENTIONALMANUFACTURING

PROCESSES



`

CONTENTS• Introduction to Unconventional Manufacturing Processes• Abrasive Jet Machining • Electro-discharge Machining (EDM)• Ultrasonic Machining (USM) • Electrochemical Machining• Electron Beam Machining • Laser Beam Machining • Plasma ArcWelding • Chemical Machining • Explosive Welding • Introduction ofWelding • Underwater Welding • Metallizing and Cladding • WeldDefects, Failure and Remedies • High Velocity Forming of Metals• Electronic-Device Manufacturing • Photo Chemical Machining(PCM) • References • Question Bank • Numerical Problems • ObjectiveType Questions • Model Test Papers • Examination Papers • Index.

By

Rahul Jain

OPERATIONSRESEARCH

CONTENTS

By

A.P. Verma

A Textbook of

INDUSTRIALMANAGEMENT



`

CONTENTS• Principles of Management • Human and Industrial Relation• Professional Ethics • Motivation • Leadership • Communication• Human Resource Development (HRD) • Wage Payment • Labour,Industrial and Tax Laws (Industrial Legislation) •Accidents and Safety-Industrial Safety and Housekeeping) • Environmental Engineering• Entrepreneurship • Business Organisations • Standards and Codes• Technicians • Marketing Management • Financial Management• Personnel Management • Material Management, Stores &Storekeeping and Material Handling • Examination Papers • Index.

ByA.P. VermaN. Mohan

Size : 20 × 30/8Pages : 850 Approx.ISBN 13: 978-81-85749-71-6ISBN 10: 81-85749-71-X

Price: 425/-Sixth Edition : 2014

`

CONTENTS• Introduction to Industrial Engineering, Production and OperationsManagement Function • Facilities Location, Plant Layout, MaterialHandling and Capacity Planning • Work Study • Value Engineering• Work Design • Ergonomics • Production and Productivity • ProductionPlanning and Control • Inspection and Quality Control • Wages andIncentives • Operations Research • Job Evaluation and Merit Rating• Industrial Organisation • Industrial Ownership • Factory Legislation:India • Manpower Planning and Control • Replacement Analysis andReliability Theory • CostAccounting, Sales Management and FinancialControl • Break-Even Analysis • Purchasing, Stores and Storekeeping,Codification and Standardization • Maintenance Management andWaste Control • Accidents and Safety (Industrial Safety andHousekeeping) • Environmental Engineering • Entrepreneurship • SalesForecasting • Supply Chain Management •Appendix • Index.

INDUSTRIALENGINEERING AND

MANAGEMENT



`

By

A.P. Verma

• Introduction to Operations Research • Linear Programming Problems:Formulation & Graphical Solution • Simplex Method • TransportationProblems • Assignment Problems • Duality in Linear Programming• Revised Simplex Method and Bounded Variable Technique• SensitivityAnalysis (Post OptimalAnalysis) • Goal Programming andInteger Programming • Dynamic Programming • Non-LinearProgramming • Probability Theory & Markov Analysis • SequencingModels • Decision Analysis • Game Theory (Competitive Strategies)• Queuing Models • Inventory Management • Replacement Problemsand Reliability Theory • Simulation • Network Models • CPM andPERT • Resources Allocation and Scheduling • Information Theory• Geometric Programming & Fractional Programming • SelectBibliography • Appendix • Index • Index of Some Typical Problems ofOR.



PRODUCTIONMANAGEMENT



`

CONTENTS• Work Study • Plant Layout • Material Handling • Production Planningand Control • Inspection and Quality Control • Standards and Codes• Repair & Maintenance • Cost Estimation • Value Engineering• Accidents and Safety • Environmental Engineering • PracticalsExercise • Examination Papers • Index.

By

A.P. Verma

HUMANRESOURCE

MANAGEMENT

CONTENTS• Concept of Human Resource Management • Procurement andPlacement • Job Evaluation and Performanace Appraisal • Training andDevelopment • Work Design & Job Design • Wage Payment (EmployeeRemuneration) • Motivation and Job Satisfaction • Leadership• Communication • Worker’s Participation in Management • Integration(Human Relation and Industrial Relation, Trade Unionism, IndustrialDispute and Resolution) • Maintenance (Safety Engineering, EmployeeWelfare and Social Security) • HR Accounting and Audit • FutureChallenges for HRM •Appendix • Index.

By

A.P. Verma

MACHINEDESIGN



`

CONTENTS• Introduction to Design • Riveted and Welded Joints • Screwed Joints• Keys and Couplings • Shafts • Cotter Joints • Knuckle Joint • PowerScrews • Clutches • Cams •Appendices • Index.

By

A.P. Verma



`

CONTENTS• Concept of Systems and Operations Management • Plant Location,Plant Layout and Material Handling • Sales Forecasting • ProductionPlanning • Production Control and Machine Capacity • NetworkingTechniques • Accidents and Safety • Human Resource Development(HRD) • Index.

OPERATIONSMANAGEMENT



`

By

A.P. Verma



Introduction to

OPERATIONSRESEARCH



`

CONTENTS• Introduction to Operation Research • Linear Programming Problems :Formulation and Graphical Solution • Linear Programming Problems :Simplex Method • Transportation Problems • Assignment Problems• Duality in Linear Programming • Waiting Line Model (QueuingModel) • CPM and PERT (Project Line Models) • Simulation • DecisionAnalysis • Game Theory (Competitive Strategies) • ReplacementProblems • System Reliability • Software Reliability • InformationTheory •Appendix • Examination Papers • Index.

By

A.P. Verma

A Textbook of

WELDINGTECHNOLOGY

CONTENTS

By

G.D. Garg

A Textbook of

(SI Units)

MACHINE DESIGN



`

CONTENTSSection-I General • Introduction

Section-II Fasteners

Section-III Power Transmission

Section-IV Pressure Vessels

Section-V I.C. Engine PartsSection-VI Miscellaneous Topics

• Engineering Materials • StressAnalysis• Designing for Strength • Manufacturing Considerations in Design • Sealsand Gaskets.

• Riveted Joints • Welded Joints • Threaded Joints• Eccentric Loading of Riveted, Welded and Threaded Joints • Cotter andKnuckle Joints • Keys and Couplings • Pipe Joints • Levers• Springs.

• Shafts and Axles • Bearings• Clutches and Brakes • Belt Drives • Rope Drive • Chain Drives• Gear Drives • Power Screws

• Cylinders, Pipes and Tubes • Cylinder Headsand Cover Plates.

• General Design • Design of Principal Parts .• Miscellaneous Topics

•Appendices • Index.

ByDr. P.C. Sharma

Dr. D.K. Aggarwal



`

CONTENTSPart-I GeneralPart-II Steam Power Plants

Part-III Internal Combustion Plants

Part-IV Hydro-Electric Power PlantsPart-V Miscellaneous Topics

• Introduction.• Introduction • Steam Generators, Water

Treatment • Steam Nozzles and Steam Turbines • Steam TurbinesPerformance and Efficiencies • Heat Cycles • Condensers • CoolingPonds and Cooling Towers • Fuels, Fuel Handling Combustion,Combustion Control • Ash Handling, Dust Collection, Soot Blowers• Superheaters, Economisers, Air Preheaters, Feed Water Heaters andEvaporators • Miscellaneous • Nuclear Power Plants.

• Internal Combustion EnginePower Plants • Gas Turbines Power Plants

• Hydro-electric Power Plants.• Economics of Power Plants

• Economic Loading of Power Plants • Major Electric Equipment • PlantInstrumentation • Pollution and its Control •Appendics • Index.

A Textbook of

POWER PLANTENGINEERING

Size: 20 × 26/8Pages: 375 ApproxISBN : 978-93-5014-191-5


`

By

Dr. P.C. Sharma

• Introduction to Welding • Welding Processes • Friction Welding• Resistance Welding Processes • Special Welding Processes • ArcTheory • Thermal Cutting Processes • Surfacing • Classification ofSteels and Their Properties • Weldability • Weld Design—Symbols andEstimation • Welding Distortion and Control • Weld Defects • Testing ofWelds • Safety in Welding and Cutting • Heat-Treatment of Welds• Mechanisation and Automation in Welding • Arc Welding PowerSources • Welding Consumables •Appendix • References • Index.



STRENGTHOF

MATERIALS(Mechanics of Materials)



`

CONTENTS• Introduction to the Subject and SI Units • Simple Stresses and Strains• Compound Stresses and Strains • Bending Moments and ShearingForces in Beams • Centroid and Moment of Inertia • Bending Stresses• Deflection Due to Bending • Torsion • Columns • Strain Energy• Theories of Failure • Thin Cylinders and Spheres • Fixed Beams• Shear Stress Distribution • Shear Stress Distribution in thin Sectionsand Shear Centre • Curved Beams • Springs • Thick Cylinders andSpheres • Rotating Rims and Discs • Deflection and Strain Energy Dueto Shear • Compound (Combined) Loading • Riveted Joints • WeldedJoints •Appendices • Index.

ByR.S. LehriA.S. Lehri

ByDr. S.K. SharmaSavita Sharma

ByDr. S.K. SharmaSavita Sharma

INDUSTRIALENGINEERING &ORGANIZATIONMANAGEMENT

CONTENTS• Industrial Engineering and Development of Factory System • Production,Productivity and Business Organization • Locational Economics and Plant Layout• Sales Forecasting • Product Development and Design • Materials Purchase and StorePractice • Production, Planning and Control • Factory Organization • Inspection andQuality Control • Depreciation • Break, Even Analysis • Inventory Control • WagePayment Plans • Job Evaluation and Merit Rating • Book Keeping and Accountancy• Material Handling • Introduction to Work Study • Motion Study, P.M.T.S., M.T.M.Work Sampling and Principles of Motion Economy • Work Measurement (TimeStudy) • Personnel Management and Administration • Industrial Relation,Recruitment, Selection, Training and Industrial Legislation • Cost Accounting,Mechanical Estimation and Cost Estimation • Program Evaluation, ReviewTechniques and Critical Path Method • Economic Studies for Investment &Replacement • Engineering Economy and the Engineering Process • FinancialManagement • Introduction to Management and Role of a Manager • Value Analysis• Entrepreneurship • Marketing Management • Operation Research • ManpowerPlanning • Introduction to MRP, JIT Supply Chain Management and TQM• Maintenance Management • Waste Management • Ergonomics • Bibliography• Index.

WORK STUDYAND

ERGONOMICS



`

CONTENTS• Work Study and Productivity • Management Techniques to ReduceWork Content and Ineffective Time • Working Condition and IndustrialSafety • Method Study • Work Measurement (Time Study)• Predetermined Motion Time Systems • Other Techniques of WorkMeasurement • Plant Layout • Ergonomics • Value Analysis • JobEvaluation and Merit Rating • Wage Payment Plans • Material Handling• Industrial Psychology • Operation Research • Bibliography • Index.



`

CONTENTS• Automation • Basics of Fluid Power • Hydraulic Fluid Power Systems• Pneumatic Fluid Power Systems • Assembly Automation Equipment• Electrical and Electronic Controls • Robotics • Robot Applications• Robot Programming • Future Trends in Automated Systems • FlexibleManufacturing System (FMS) • Model Question Papers • Index.

INDUSTRIALAUTOMATION AND

ROBOTICS



`

ByKhushdeep GoyalDeepak Bhandari



AUTOMATIONAND

ROBOTICS



`

CONTENTS• Introduction • Robot Elements • Robot Coordinate System andManipulator Kinematics • Robot Control • Robot Programming • RobotApplications •Automation • Index.

ByKhushdeep GoyalDeepak Bhandari

Fundamentals of

COMPUTER AIDEDDESIGN

CONTENTS

By

Khushdeep Goyal

Fundamentals of

COMPUTER AIDEDMANUFACTURING



`

CONTENTS• Automation • Features of NC Machines • NC Part Programming • SystemDevices • Interpolators • Computer Integrated Manufacturing Systems• Robotics • Robot Applications • Robot Programming • IntelligentManufacturing • Model Question Papers • Previous Year Question Papers• Index.

ByKhushdeep Goyal



`

CONTENTS• Introduction to Computer Aided Design • CAD Hardware andComputer Graphics • Geometric Transformations • GeometricModeling • Representation of Curves and Surfaces • Finite ElementMethod • NC/ CNC Machines • NC Part Programming • ComputerIntegrated Manufacturing Systems • Automation • Model QuestionPapers • Index.

COMPUTER AIDEDDESIGN AND

MANUFACTURING



`

By

Khushdeep Goyal

• Introduction to Computer Aided Design • Computer Graphics-I• Computer Graphics-II • Geometric Transformations • Curves • 3DGraphics • AutoCAD and ProE Software • Numerical Methods • FiniteElement Method • Automation • Flexible Manufacturing Systems(FMS) • Model Question Papers • Previous Years Question Papers• Index.



CNC MACHINESAND

AUTOMATION



`

CONTENTS• Introduction to Numerical Control Machines • CNC SystemComponents/ Construction Details • NC Part Programming• System Devices • CNC Machine Tool Fault Diagnosis• Automation and NC System • Robotics • Computer IntegratedManufacturing Systems • Experiments • Model Question Papers• Index.

ByKhushdeep Goyal

ByDr. R.K. Singal

ByDr. R.K. Singal

IC ENGINESAND

COMPRESSORS

CONTENTSUnit I : Introduction

Unit II : SI Engines

Unit III : C.I. Engines

Unit IV : Compressors

• Engine Power Cycles • Engine Classification • Engine Fuels • Testingand Performance.

• Combustion in S.I. Engines • Carburetion • Ignition System.

• Combustion in CI Engines • Fuel Injection System • Scavenging inTwo Stroke Engines • Pollution and its Control.

• Engine Cooling • Engine Lubrication • Supercharging • ReciprocatingCompressors • Rotary Compressor • Index.




`

CONTENTSPart I : Theory

Part II : Practicals

Part III : Board Paper with Solution/Hints

• Motor Vehicle • Power System • Transmission System • SteeringSystem • Braking System • Suspension System • Automobile ElectricalSystem • Battery • Dynamo and Alternator • Diagram of a TypicalWiring System • Lighting System and Accessories • Emission Control.

• List of Practicals.

• Board Paper with Solution/Hints • Index.

CONTENTSSection-I: Basic Concepts and Principles

Section-II: Single Degree of Freedom (SDF) Systems

Section -III: Two Degree of Freedom (TDF) Systems

Section-IV: Multi Degree of Freedom (MDF) Systems

Section-V:Appendices

• Basic Concepts •Analysis of Harmonic Motion.

• Free Vibrations of SDF Systems • Free Damped Vibrations of SDFSystems • Forced Vibrations of SDF Systems • Transient Vibrations ofSDF Systems

• Vibrations of TDF Systems • VibrationAbsorber Systems.

• Vibrations of MDF Systems • Vibrations of Continuous Systems• Analysis of MDF Systems by Numerical Methods • Critical Speed ofShafts • Design Problems and Experiments.

• Index.

MECHANICALVIBRATIONS

(Theory & Applications)



`

ByDr. R.K. Singal



`



PRODUCTIONPLANNING &

CONTROL



`

CONTENTSUnit-I: Production Systems and Business Planning

Unit-II: Production Planning: Resources and Procedures

Unit-III: Production and Inventory Control

Unit-IV: Productivity and Human Factors

Unit-V:Appendices

• Production Systems • Business Planning.

• Production Planning: Resources • Production Planning: Procedures.

• Production Control • Inventory Control.

• Productivity • Human Factors and Ergonomics.

• Index.

ByDr. R.K. Singal

PROJECTMANAGEMENT

CONTENTS

ByR.K. SingalM. SingalR. Singal

ENTREPRENEURSHIPDEVELOPMENT

ANDMANAGEMENT



`

CONTENTSPart-I: Entrepreneurship Development

Part-II: Management of Small Scale Industry

• Entrepreneurship• Entrepreneurial Support System • Market Survey and OpportunityIdentification (Business Planning) • Project Report Preparation .

• Managerial Aspectsof Small Business • Legal Aspects of Small Business • EnvironmentalConsiderations • Human and Industrial Relations • Motivation• Leadership • Some Aspects of Factory Management • Appendices• References • Model Question Papers • Previous Year Question Paperswith Solution Hints • Index.

ByDr. R.K. Singal



`

CONTENTS• Workshop Layout • Carpentry Shop • Fitting / Bench Working Shop• Black Smithy Shop • Welding Shop • Steel Metal Shop • Machine Shop• Foundry Shop • Model Question Papers • Selected Questions withSolutions • Index.

WORKSHOPMANUAL



`

By

Dr. R.K. Singal

Unit-I : Concepts of Projects and Project Management

Unit-II: Project Organization and Contracts

Unit-III: ProjectAppraisal and CostAnalysis

Unit-IV : Project Planning and Scheduling and Network CostSystem

Unit-V : Network Models and Computerized Project Management

• Concept of Projects and Classification • Concept of ProjectsManagement & Scope.

• Project Organization • Project Contracts.

• ProjectAppraisal • Project Cost and PerformanceAnalysis.

• Project Planning & Scheduling • Network Cost Systems.

• Network Models: Modifications and Extensions • Computer AidedProject Management •Annexures • Index.



REFRIGERATIONAND

PSYCHROMETRICCHARTS

(WITH PROPERTY TABLES)(S.I. Units)


Price: 75/-`

CONTENTS• Introduction • Psychrometric Chart and Tables • R-729 Air• Lithium Bromide and Ammonia-Water Solutions • R-717 Ammonia(NH ) • R-744 Carbon Dioxide • R-11 Freon-11 • R-12 Freon-12 • R 22

Freon-22 • R- 502Azeotrope • R-13ATetrafluoroethane.3

ByDr. R.K. Singal

ByDr. R.K. Singal

ByDr. R.K. Singal

STEAM TABLESWith Mollier Diagrams

(S.I. Units)

CONTENTS• Introduction • Table 1. Compressed and Subcooled Water • Table 2.Properties of Saturated Water and Steam (Temperature Varying) • Table3. Properties of Saturated Water and Steam (Pressure Varying) • Table 4.Thermodynamic Properties of Superheated Steam • Table 5. Propertiesof Supercritical Steam • Coloured Mollier Diagram in SI Units•Additional Mollier Diagram in MKS Units.

PRODUCTIONMANAGEMENT



`

CONTENTS• Production Planning and Control • Plant Location and Layout • WorkStudy • Inventory Control • Inspection and Quality Control • MaterialHandling • Repair and Maintenance • Cost Estimation and Control•Appendices • Index.

CONTENTSPart I : Entrepreneur and Small Scale Industries

Part II : Business Planning

Part III :Accountancy and Management of Small Business

Part IV : Project Planning and Control

Part V : Legal Obligations and Entrepreneurial Support System

• Entrepreneur • Small Scale Industries.

• Project Identification and Selection • Project Report Preparation.

•Accountancy • ManagerialAspects of Small Business.

• Project Planning • Project Control.

• Legal Obligations • Entrepreneurial Support System • Annexure• University Paper with Solution Hints • Index.




`

ByDr. R.K. Singal

Sruti Singal



`



A Selective Course in

NON-CONVENTIONALENERGY

RESOURCES



`

CONTENTSUnit I

Unit II

Unit III

Unit IV

Unit V

• Energy Resources • Solar Cells.

• Solar Thermal Energy.

• Geothermal Energy • Magneto-Hydrodynamic (MHD) • Fuel Cells.

• Thermoelectric and Thermionic Conversions • Wind Energy

• Biomass • Ocean Thermal Energy Conversion (OTEC) • Wave andTidal Wave • Waste Recycling Plants • Index.

ByDr. R.K. Singal

Saroj Singal

ENGINEERINGECONOMICS AND


CONTENTS

ByDr. R.K. SingalEr. Rishi Singal

Theory of

MACHINES-I



`

CONTENTSUnit I

Unit II

Unit III

Unit IV

Unit V

• Simple Mechanisms • VelocityAnalysis in Mechanisms.

•Acceleration in Mechanisms • Mechanisms with Lower Pairs.

• Bearing Friction • Belt and Pulley Drive • Brakes and Dynamometers.

• Cams.

• Gears • Gear Trains • Annexure-I : University Paper • Annexure-II :References • Index.

ByDr. R.K. Singal



`

CONTENTSUnit-I

Unit-II

Unit-III

Unit-IV

• Static and Dynamic ForceAnalysis • Turning Moment and Flywheel.

• Balancing of Machines.

• Governors.

• Gyroscopic Motion • Mechanical Vibrations • Sample UniversityPaper (Solved) • References • Index.

Theory of

MACHINES-II



`

By

Dr. R.K. Singal

Part-I: Engineering Economics

Part II: Industrial Management

• Cost Analysis • Replacement Studies • Economic Analysis ofInvestmentAlternatives • Cost Estimation • Depreciation.

• Concepts of Industrial Management • Productivity • Design ofOrganization Structure • Material Management •Appendix • Index.



INTERNALCOMBUSTION

ENGINES



`

CONTENTSUnit:I: Introduction

Unit:II: S.I. EnginesUnit:III: C.I. EnginesUnit:IV: I.C. Engines Systems

Unit:V: Engine Fules and Supercharging

• Basic Concepts • Engine Terminology• Engine Testing and Performance.

• Combustion in S.I. Engine.• Combustion in C.I. Engine.

• Fuel Ignition Systems• Carburetion and Fuel Injection in S.I. Engines • Fuel Injection Systemsof C.I. Engines • Engine Cooling Systems • Engine Lubrication Systems• Scavenging Systems • Special Types of Engines.

• Engine Fuels • EngineExhaust Emission • Supercharging • Experiments • Previous YearQuestion Papers • Index.

ByDr. R.K. Singal

ByDr. R.K. Singal

MECHANICALVIBRATION AND

NOISEENGINEERING

CONTENTSUnit-I

Unit-II

Unit-III

Unit-IV

Unit-V

• Fundamentals of Vibrations • Undamped Free Vibrations.

• Damped Free Vibrations.

• Harmonically Excited Vibrations • Whirling Motion and CriticalSpeed.

• Systems with Two Degrees of Freedom.

• Sound (Level and Response) • Noise (Sources, Isolation and Control)• References • Index.

WORKSHOPTECHNOLOGY-I(Manufacturing Processes)



`

CONTENTSPart-A: Welding Processes

Part-B: Foundry Engineering

Part-C: Metal Forming ProcessesPart-D: Plastic ProcessingPart-E: Practical Exercises.Part-F: Machining

• Gas and Arc Welding • Resistance andSpecial Welding Processes • Modern Welding Methods • PracticalExercises.

• Pattern Making • Moulding Practice• Casting Technology • Practical Exercises.

• Metal Forming Processes.• Plastic Processing.

• Tools and Tool Materials •Turning (Lathe)• Drilling • Boring • Shaping, Planing and Slotting • Broaching• Practical Exercises • References Books • Index.

CONTENTS• Tools and Tool Materials • Turning (Lathe) • Drilling • Boring• Shaping, Planing and Slotting • Broaching • Jigs and Fixtures • CuttingFluids and Lubricants • Practical Exercises • Milling • Grinding • MetalForming Processes • Metal Finishing Processes • Metallic CoatingProcesses • Welding • References • Index.

WORKSHOPTECHNOLOGY-II(Manufacturing Processes)



`



`

ByDr. R.K. Singal

ByDr. R.K. Singal



WORKSHOPTECHNOLOGY-III(Manufacturing Processes)



`

CONTENTS• Milling • Grinding • Gear Manufacturing and Finishing Processes• Modern Machining Processes • Metallic Coating Processes• Metal Finishing Processes • Jigs and Fixtures • Plastic MouldingTechniques • Broaching • References • Index.

ByDr. R.K. Singal


CONTENTS

ByDr. O.N. PandeyBhupesh Aneja

QUALITYMANAGEMENT



`

CONTENTS• Quality Concept • Total Quality Management (TQM) • Quality by Design• Control on Purchased Product • Manufacturing Quality • QualityManagement • Control Charts • Defects Diagnosis and Prevention • QualityManagement System • Taguchi Quality Method and JIT • ISO-14000Quality Management System • Quality Audit • Reliability• Production Planning and Control • Maintenance Functions • GeneralMaintenance • Predictive Maintenance (PDM) • Spare Parts Management• Pareto Principle • SWOT Analysis • Value Engineering • Appendices• References • Index.

ByO.N. Pandey

Bhupesh Aneja

Size: 20 × 30/8Pages: 275 Approx.

Price: 165/-Third Edition: 2011

`

CONTENTS• Introduction to Manufacturing Processes.

• Metal Casting Process (Foundry) • Special Casting Processes.• Smithy and Forging • Bench Work and Fitting.• Metal Joining Processes (Welding).• Sheet Metal Operations (Cold Working Processes) • Short

QuestionAnswers • Objective Question Bank • Index.

Unit-I:Unit-II:Unit-III:Unit-IV:

MANUFACTURINGPROCESSES



`

By

Virender Narula

• Introduction • Productivity • Management Functions • ManagementTools • Work Simplification • Production Planning and Control• Inventory Control • Quality Control • Statistical Quality Control(SQC) • Total Quality Management (TQM) • Environmental Issues• ISO: 14000 Series • Just in Time (JIT) • Pareto Principle • SWOTAnalysis • Value Engineering • Glossary • Appendices • References• Index.



WORKSHOPTECHNOLOGY



`

CONTENTS• Introduction to Workshop Technology • Industrial Safety andAccidents • Engineering Materials • Bench Work and Fitting (FittingShop) • Hot Working Processes (Smithy and Forging Shop) • SheetMetal Processes (Sheet Metal Shop) • Carpentary Shop • WeldingProcesses (Welding Shop) • Metal Casting Processes (Foundry Shop)• Metal Cutting Processes (Machine Shop) • Index.

ByVirender Narula

ByVirender Narula

MANUFACTURINGPRACTICES

(Including Tools & Exercises)

CONTENTS• Introduction to Workshop Technology • Industrial Safety andAccidents • Engineering Materials • Bench Work and Fitting (FittingShop) • Hot Working Processes (Smithy and Forging Shop) • SheetMetal Processes (Sheet Metal Shop) • Carpentry Shop • WeldingProcesses (Welding Shop) • Metal Casting Processes (Foundry Shop)• Metal Cutting Processes (Machine Shop) • Index.

WORKSHOPCALCULATIONSFOR MACHINE

TOOL OPERATORS



`

CONTENTS• Speed of Pulleys and Gears—Cutting Speeds and Feeds • Trianglesand Trigonometric Ratios • Taper Turning • Screw Thread Forms• Measuring Screw Threads • Change Gears for Screw Cutting• Indexing and Spiral Milling • Spur Gears • Spiral or Helical Gears• Bevel Gears • Worm Gears • Spur and Spiral Gear Hobbing• Miscellaneous Workshop Operations • Limit Systems • ContinuedFractions • Control Charts • Workshop Exercises • Answers•Appendices • Index.

CONTENTS• Introduction to Manufacturing Processes • Industrial Safety• Properties of Engineering Materials • Ferrous Metals • Metal CastingProcesses (Foundry) • Special Casting Processes (Contemporary) • HotWorking Processes • Cold Working Processes (Sheet Metal Operations)• Bench Work and Fitting • Welding (Metal Joining Process) • MetalCutting Processes • Plant Layout • Appendices • Previous YearsExamination Papers • Index.




`



`

ByVirender Narula

ByVirender Narula



ENGINEERINGMATERIALS AND

METALLURGY



`

CONTENTS• An Overview of Engineering Materials • Crystallography-I : CrystalStructure • Crystallography-II : Defects in Crystals • MechanicalProperties and Testing • Failure Mechanisms • Phase Transformation-I:Phase Diagrams • Phase Transformation-II: Fe-C Phase Diagram • HeatTreatment of Steels • Non-ferrous Metals and Alloys • Polymers• Ceramic Materials • Composites • Powder Metallurgy • Appendix• PreviousYear Question Papers • Index.

ByDr. Rakesh Dogra

Dr. Arvind Sharma

Advances in

MATERIAL SCIENCE

CONTENTS

ByRakesh Dogra

THERMODYNAMICS(Vol. I)



`

CONTENTS• Fundamental Concepts • Laws of Perfect Gases • ThermodynamicProcesses on Gases • Laws of Thermodynamics • Ideal and Real Gases• Properties of Steam • Steam Generators • Fuels and Combustion • AirStandard Cycles • Air Compressors • Introduction to Heat Transfer• Experiments • Tables • Index.

By

Er. B.S. Ubhi



`

CONTENTSPart-I

Part-II

• Principles of I.C. Engines • Fuel Supply and Ignition System of PetrolEngine • Fuel Systems of Diesel Engines • Engine Cooling andLubrication • Engine Testing and Pollution Control • Air Compressors• Gas Turbines and Jet Propulsion • Steam Nozzles, Turbines andCondensers • Steam Power Plants.

• Experiments • References • Index.

THERMODYNAMICS(Vol. II)



`

By

Er. B.S. Ubhi

• An Overview of Engineering Materials • The Structure of Materials• Imperfections in Crystals • Mechanical Properties and Testing• Failure Mechanisms • Equilibrium Phase Diagrams • Carbon Steelsand Their Heat Treatments • Non-Ferrous Metals andAlloys • Polymers• Ceramic Materials • Composites • Powder Metallurgy • Dielectric andConducting Materials • Semiconductor and Superconductors • OpticalProperties • Magnetic Materials • Appendix • Previous Year QuestionPapers • Index.



Theory of

MACHINES



`

CONTENTS• Simple Mechanisms • Friction • Transmission • Flywheel• Governors • Balancing • Vibrations •Appendices.

ByEr. B.S. Ubhi

ByProf. Vivek Kumar

OPERATIONSRESEARCH

CONTENTSUnit-I

Unit-II

.Unit-III

Unit-IV

Unit-V

• Introduction to Operation Research • Linear Programming–GraphicalMethod • Linear Programming–Simplex Method.

• Transportation Problem • Assignment Problems • DynamicProgramming

• Decision Theory • Game Theory • Sequencing Problem.

• Stochastic Inventory Models • Simulations.

• Queuing Models • Project Management (PERT and CPM)• Replacement Problem • Software Programs based on ORApplications• Appendix • Tutorial Question Bank • Model Question Papers• Questions from GATE • PreviousYear Question Papers • Index.

WORKSHOPPRACTICE



`

CONTENTS• Carpentry Shop • Fitting Shop • Welding Shop • Smithy Shop• Electrical Shop • Foundry Shop • Sheet Metal Shop • Machine Shop• Electronic Shop.

CONTENTSPartA

Part B

• Carpentry and Pattern Making • Foundry Shop • Forging Practice• Machine Shop.

• Welding Shop • Electrical Shop • Electronic Shop • Sheet Metal Shop• Fitting Shop • Index.

MANUFACTURINGPRACTICE



`



`

BySwarn Singh

BySwarn Singh



Data Book for

DESIGNINGMACHINE

ELEMENTS



`

CONTENTS• Engineering Design Process • Riveted Joints • Welded Joints • ScrewedJoints • Shaft • Keys • Couplings • Cotter Joints • Knuckle Joints • PowerScrews • Flat Belts • Flat Belts Pulleys • V-Belts and Rope Drives • ChainDrives • Clutches • Brake • Flywheel • Bearings • I.C. Engine • Worm Gears• Spur Gears • Helical Gears • Bevel Gears •Levers • Springs • Columns andStruts • Seals and Gaskets • Governors • Dynamometers • Cams • InertiaForces in Reciprocating Objects • Balancing of Reciprocating Masses• Longitudinal and Transverse Vibrations • Torsional Vibrations • Gen• Design Philosophy• Machine Design Future Technology Trends• Lowering the Cost and Risk of Machine Design • Appendix-A: List ofMaterials Properties • Appendix-B: Elements Properties • Appendix-C:Fundamentals and Supplementary Units • Appendix D: • AppendixE:Viscosity • Appendix-F: Friction Joint Theory • Appendix-G: MD•Appendix-H: Interrelationship between Tolerances and Limits.By

Er. Arun Kumar

A Textbook of

TRIBOLOGY

CONTENTS

ByEr. Arun Kumar

STRENGTHOF

MATERIALS



`

CONTENTS• Fundamentals • Simple Stress and Strains • Temperature Stress and Strains• Elastic Constants • Strain Energy and Impact Loading • Centre of Gravity• Moment of Inertia • Analysis of Framed Structures (Analytical Method)• Analysis of Framed Structures (Graphical Method) • Shear Force andBending Moment of Beams • Bending Stress in Beams • Shearing Stresses inBeams • Deflection of Beams • Deflection of Cantilevers • ProppedCantilever and Beams • Fixed Beam • Continuous Beam • Direct andBending Stresses • Columns and Struts • Dams and Retaining Walls• Torsion of Circular Shafts • Springs • Compound Stresses • Thin Cylinderand Spheres • Thick Cylinders and Spheres • Riveted Joints • Welded Joints• Mechanical Testing of Metals • Curved Beams • Rotational Stresses• Unsymmetrical Bending • Three Dimensional Stress Analysis • Appendix• Index.

By

M. Chakarborti



`

CONTENTSUnit-I:

Unit-II:

Unit-III:

Unit-IV:

• Engineering Materials • Ferrous Materials • Heat Treatment • Non-Ferrous Materials.

• Metal Forming • Casting.

• Machines and Machining Operations • Welding.

• Manufacturing and Plant Layout • Non-Metallic Materials • PowderMetallurgy and Plastics • Model Test Papers • Previous YearExamination Papers • Index.




`

ByVikas UpadhyayVikas Agarwal

• History and Industrial Significances of Tribology • SurfaceEngineering and Wear • Friction • Wear • Lubrication • Bearings• Composite Materials • Nanotribology • Filter and Filtration• Appendices • Important Questions • Model Question Papers• Bibliography • Index.



MANUFACTURINGSCIENCE



`

CONTENTSUnit I : Properties: Inspection and Testing of Material

Unit II : Basic Metals andAlloys: Properties andApplications

Unit III : Introduction to Metal Forming and Casting Process anditsApplication

Unit IV : Introduction to Machining and Welding and itsApplications

Unit V : Miscellaneous Topics

• Engineering Materials.

• Ferrous Materials • Heat Treatment • Non-Ferrous Materials.



• Manufacturing and Plant Layout • Powder Metallurgy and Plastics• Model Question Papers • Previous Years Examination Papers• Index.



BASICMANUFACTURING

PROCESSES

CONTENTSUnit-I

Unit-II

Unit-III

Unit-IV

• Engineering Materials • Ferrous Materials • Non-Ferrous Materials.



• Heat Treatment • Manufacturing Establishment • Non-MetallicMaterials • Model Question Papers • Previous Years ExaminationPapers • Index.

MANUFACTURINGPROCESS-I



`

CONTENTSUnit-I

Unit-II

Unit-III

Unit-IV

• Introduction.

• Casting Processes • Moulding • Cores • Gating and Rising System• Melting Furnaces • Casting Process.

• Welding Processes • Gas Welding and Gas Cutting • Arc Welding• Brazing and Soldering.

• Inspection and Testing • Bibliography • Solved and UnsolvedQuestion Papers • Index.

CONTENTS• Metal Forming • Rolling Process • Forging • Extrusion • Drawing• Sheet Metal Forming Operation • Press Working • Powder Metallurgy• Metal Cutting • Cutting Tools • Cutting Tool Materials • Machine ToolsLathe • Shaping and Planning • Milling Machine • Drilling Machine• Boring Machine • Grinding Machine • Broaching Machine • Practicals• Bibliography • Solved Question Papers • Index.

MANUFACTURINGPROCESS-II



`



`

ByEr. Sandy Khippal

ByEr. Sandy Khippal






`

CONTENTS• Introduction • Principles of Design of Main Components • Power andTorque Characteristics • Gear Box • Clutches •Automatic Transmission• Drive Line • Front Axle and Steering • Braking System • Chassis andSuspension System • Electrical System • Fuel Supply System• Automobile Air-Conditioning • Cooling and Lubrication System• Maintenance System • Model Short Notes • Experiments • PreviousYear Question Paper • Index.

By

K.M. Moeed

HUMAN VALUESAND

PROFESSIONALETHICS

CONTENTS

BySmriti Srivastava

INDUSTRIALPSYCHOLOGY



`

CONTENTS• Introduction to Industrial Psychology • Motivation • Work Environmentand Engineering Psychology • Performance Management: Training andDevelopment • Objective Type Question • References • Index.

ByDhameja

& Dhameja

CONTENTS• Industrial Sociology • Rise and Development of Industry• Industrialization in India • Contemporary Issues • Objective TypeQuestions • References • Index.

INDUSTRIALSOCIOLOGY



`

• Human Values and Value Education • Harmony in Human Beings• Harmony in the Family and Society • Harmony in the Nature • HumanValues • Ethics • Glossary • Model Question Papers • Previous YearQuestion Paper (Solved) • Index.

ByDhameja

& Dhameja



`



INDUSTRIALSOCIOLOGY



`

CONTENTS• Introduction to Industrial Sociology • Development of IndustrialSociology • Industrialisation • Factory System • Factory ManagementTheory • Trade Unions • Indus t r ia l i sa t ion in India• Impact of Industrialisation of Society • Industrial Disputes, Strikes andLockouts • Industrial Relations Machinery • Grievance and ComplaintManagement • Indian Labour Legislations • Industrial DisputePreventive Machinery • Industrial Disputes Preventive Machinery inI n d i a • I n d u s t r i a l D i s p u t e s S e t t l e m e n t M a c h i n e r y• Industrial Disputes Settlement Machinery in India • Unfair LabourPractices • References • Index.

ByAshok Raj

ByRanbir Singh

PRINCIPLES OFENGINEERING

ECONOMICS ANDMANAGEMENT

CONTENTS• Economics • Economic Systems • DemandAnalysis • SupplyAnalysis• Theory of Production • Monetary and Fiscal Policy • Banking in India• Privatization in India • Trade Cycles • Foreign Capital • Evolution ofManagement Thought • Management Concepts • FinancialManagement • Accounting • Marketing Management • Advertising• Production Management • Plant Location and Layout • Pert and CPM•Total Quality Management • Statistical Quality Control • References• PreviousYears Examination Papers • Index.




`

CONTENTS• Entrepreneurship • Business Plan • Small Scale Industries• Institutional Support System • Project Identification, Selection,Formulation and Appraisal • Product Planning and Development• Concurrent Engineering • Rapid Prototyping • Marketing and SalesManagement • Advertising • Social Responsibilities and BusinessEthics • Indian Partnership Act, 1932 • The Sale of Goods Act, 1930•Appendices • Examination Papers • References • Index.

CONTENTS• Basic Concepts of Reliability • System Reliability Models• Maintenance: Concepts, Strategies and Types • Condition BasedMaintenance • Reliability Centered Maintenance, Total ProductiveMaintenance and Failure Modes and Effects Analysis • MiscellaneousConcepts of Maintenance Engineering • Appendix • References andWeb Resources • Examination Papers • Index.

Textbook of

RELIABILITY ANDMAINTENANCEENGINEERING



`



`

ByRanbir Singh

ByMohit MaheshwarkarPallavi Maheshwarkar



PRODUCTION ANDOPERATIONS

MANAGEMENT



`

CONTENTS• Production and Operations Management • Product Design • CapacityPlanning • Facility Location • Facility Layout • Job Design and WorkStudy • Project Management • Loading, Scheduling and Sequencing ofOperations • Material Requirement Planning • World ClassManufacturing • Question Bank • Index.

By

Pratibha Garg


CONTENTS

ByDr. Pratibha Garg

Dr. Anupama Prashar

PRODUCTIONAND




`

CONTENTS• Production and Operation Management—An Overview • Strategy• Product Design and Development • Facility Location • Facility Layout• Production Planning and Control • Job Design and Work Study • CapacityPlanning • Forecasting • Purchasing Management • Value Analysis • LeanManufacturing • Maintenance Management • Material Management• Quality Management • Statistical Quality Control • Stores Management• Project Management • Material Handling • Supply Chain Management• Index.

By

Dr. Pratibha Garg



`

CONTENTSUnit-I: Metal Forming Process (Part I)

Unit-II: Metal Forming Process (Part II)

Unit-III: Sheet Metal Working

Unit-IV: Casting (Foundary)

Unit-V: Unconventional Metal Forming Process

• Metal Forming • Forging.

• Drawing and Extrusion • Rolling.

• Presses.

• Casting and Patterns • Sand Casting Process • Gates • Casting Defects• Melting Furnaces • Die Casting • Flaskless Moulding.

• Unconventional Metal Forming Process • Powder Metallurgy • Jigsand Fixtures • Manufacturing of Plastic Components • Experiments• Bibilography • PreviousYears Examination Papers • Index.

MANUFACTURINGSCIENCE-I



`

By

S.A. Rizvi

Unit-I : Operations Management

Unit-II : ProductUnit-III : Processes

Unit-IV : Plant FacilitiesUnit-V : Production Planning and Control

• Introduction • Factory Dynamics• Strategy.

• Product Life Cycle • Product and Service Design.• Reliability • Value Analysis • Maintenance

Management • Process Capability • Total Quality Management• Replacement Models

• Facility Location • Facility Layout.• Material Requirement

Planning • Forcasting • Loading, Scheduling and Sequencing ofOperations• Lean Manufacturing and JIT • Question Bank • Index.



MANUFACTURINGSCIENCE-II



`

CONTENTSUnit-I: Metal Cutting and Machine Tools

Unit-II: Machine Tools

Unit-III: Grinding and Super Finishing

Unit-IV: Metal Joining (Welding)

Unit-V: Unconventional Machining Process

• Theory of Metal Cutting.

• Lathe Machine • Shaper Machine • Drilling and Boring • Milling.

• Grinding • Super Finishing Process • Limits, Fits and Tolerance.

• Metal Joining • Unconventional Welding Process.

• Unconventional Machining Process (UCM) • Experiments• Bibliography • PreviousYears Examination Papers • Index.

ByS.A. Rizvi

ByDr. S.P. Tewari

S.A. Rizvi

Advanced

WELDINGTECHNOLOGY

CONTENTSUnit-I : • IntroductionUnit-II : •Advanced Welding Techniques.Unit-III : •Advanced Welding Techniques (Continued).Unit-IV : • Weld Design and Weld Defect

Unit-V : • Thermal and Metallurgical Consideration

• Review of Conventional Welding Process.

• Testing and Inspection ofWelding Joint • Macrostructure and Microstructure of Weld • Weldingof Pipe Lines and Pressure Vessels.

• ThermitWelding • Gravity Welding • Metal Transfer • Welding Electrodes • StudArc Welding • Objective Type Questions • Appendix • References• Examination Papers • Index.

MECHANICALMACHINE DESIGN-I



`

CONTENTS• Design Philosophy • Selection of Materials • ManufacturingConsiderations in Design • Strength Considerations in Design• Mechanical Joints • Keys, Couplings and Flywheel • Screwed Jointsand Power Screws • Shafts • Belt, Chain and Rope Drives • Clutches andBrakes • Paper • Index.

CONTENTS• Design for Production • Design for Variable Loading • Shafts • Springs• Sliding Earnings • Rolling Contact Bearings • Spur Gears • HelicalGears • Bevel Gears • Worm Gears • Index.

MECHANICALMACHINE DESIGN-II



`



`

ByDr. Sadhu Singh

ByDr. Sadhu Singh



INTERNALCOMBUSTION

ENGINESAND GAS TURBINES



`

CONTENTS• Introduction to Internal Combustion Engines • Air Standard Cycles• Carburetion, Fuel Injection and Ignition Systems • Combustion in I.C.Engines • Lubricating and Cooling Systems • Engine Testing andPerformance • Air Pollution from I.C. Engines • Reciprocating AirCompressors • Rotary Compressors • Centrifugal Compressors • AxialFlow Compressors • Gas Turbines • Previous Year Question Papers• Index.

By

Dr. Sadhu Singh

DYNAMICS OFMACHINES

CONTENTS

ByDr. Sadhu Singh

COMPUTERAIDED

DESIGN



`

CONTENTS• Introduction to CAD • CAD Hardware and Software • GeometricTransformations • Curves • Surfaces and Solids • Automation andNumerical Control • Group Technology • Flexible Manufacturing Systems(FMS) • Computer-Aided Process Planning • Finite Element Method• Question Paper • Index.

By

Dr. Sadhu Singh



`

CONTENTS• Introduction to Mechanisms • Velocity in Mechanisms • Accelerationin Mechanisms • Kinematic Analysis of Plane Mechanisms• Mechanisms with Lower Pairs • Friction • Belts, Chains and Ropes• Cams • Gears • Gear Trains • Kinematic Synthesis of PlanarMechanisms • Index.

KINEMATICS OFMACHINES



`

By

Dr. Sadhu Singh

• Static Force Analysis • Dynamic Force Analysis • Dynamics ofReciprocating Engines • Balancing of Machines • Governors• Dynamometers • Gyroscopic Motion • Appendix • Previous YearQuestion Papers • Index.



HUMANRESOURCE

MANAGEMENT



`

CONTENTS• Understanding Organizational Behavior • Motivation and Morale• Communication • Leadership • Human Resources and Industry• HRD and Organization • Wages, Payments and Compensation• Issues and Challenges of Human Behavior • Previous Year QuestionPapers • Index.

ByShikha Taneja

ByRenu Rana

Fundamentals of

MANAGEMENT

CONTENTSSectionA

Section B

Section C

Section D

• Management • Personnel Management.

• Production Management.

• Marketing Management.

• Financial Management • Globalisation : Managing in InternationalContext • PreviousYears Question Papers • Index.

Principles of

MANAGEMENT



`

CONTENTS• Management • Management Information System • OrganizationStructure and Organization Analysis • Motivation and Productivity• HRD and Organization • Organizational Behaviour • ExaminationPaper • Index.

CONTENTS• Basic Concepts of System • System Controlling, Coupling and Models• Management Roles and Functions • Organization Planning,Departmentalization and Typology • Re-engineering and Process ofChange Management • Marketing Plan • Finance Management• Productivity and Operations Plan • Productivity: MethodImprovement and Models • Basic Concepts of Entrepreneurship• Theories of Entrepreneur • Sources of Funds • Project Report • ProjectIdentification and Formulation • International EntrepreneurshipOpportunities • Family and Non-family Entrepreneur • Previous YearPaper Most Frequently Asked Questions • Model Question Papers• Examination Papers • Index.

ENTREPRENEURSHIPAND

MANAGEMENTCONCEPTS



`



`

ByShikha Taneja

Renu Rana

ByDr. Vikas SarafPawan Thakur

Lata Yadav



ORGANISATIONALBEHAVIOUR


Price : 175/-First Edition: 2011

`

CONTENTS• Management • Nature and Operational Areas of Management• Operating Systems of Management • Role of Skills in a ProfessionalManager • Planning Management • Limitation and Domains inManagement by Objectives • Decision Making • Problems SolvingTechniques and Processes • Controlling: Process and Techniques• Perception Management • Management by Impression• Management Through Effective Communication Techniques • ProjectManagement Tools • Organisational Behaviour • OrganisationalStructure and Design • Individual Determinants of OrganisationalBehaviour • Learning • Critical Thinking and Problem Solving• Motivation for Management • Job Anxiety and Stress • Group/TeamDynamics • Analysis of Interpersonal Relations • Leadership Theories,Styles and Influence • Change Management • Management ofOrganisational Conflicts • PreviousYear Question Papers • Index.

ByEr. Ishwar SinghDr. Bratpal Singh

Impact ofSCIENCE AND

TECHNOLOGY ONSOCIETY

CONTENTS

ByIshwar Singh

Fundamentals of

MANAGEMENT



`

CONTENTS• Management—Art, Science and Profession • Development (Evolution) ofManagement Thoughts • Staffing: Personnel Management-ManpowerPlanning-Interview-Recruitment-Tranining and Promotion • Production,Planning and Control Management • Material Management • InventoryControl • Marketing Management • Financial Management • CapitalStructure • Advertising • Consumer Behaviour • Human ResourceManagement • Leadership • Communication • Motivation • Management byObjectives • Decision Making • Organisation • Delegation andDecentralization of Authority • Directing • Previous Year Question Papers• Index.

By

Dr. R.C. Bhatia



`

CONTENTS• Management • Human Resource Management • FinancialManagement • Materials Management • Marketing Management• Organization • Leadership • Motivation • Ethics and Values • CustomerRelationship Management • Taxation • Wages and Incentives • LabourLaws • Intellectual Property Rights • Total Quality Management• Management Information System • Drugs • Traffic Laws • Index.

Basics of

MANAGEMENT



`

ByA.K. Gupta

R. Goyal

• History of Science and Technology • Social Realities and Institutionsof India • Inter Relationship between Science and Technology • Impactof Technology • Man-Made Hazards (Pollution of Environment)• Technology and Productivity • Technology, Culture and SocialChanges • Technology, Economy and Society Behavioural Linkage• Policy Application with Human Face for the Future Development•Abbreviations • Model Test Papers •Examination Papers • Index.



GENERIC SKILLSAND




`

CONTENTS• Generic Skills • Managing Self for Self Development • Managing Self-Physical • Managing Self-Intellectual Development • Managing Self-Psychological • Team Management • Task Management• Problem Solving • Entrepreneurship • Entrepreneurship SupportSystems • Small Scale Industry • Project Report • Index.

ByA.K. Gupta

ByMohd. Yonus Khan

INSTALLATIONTESTING AND

MAINTENANCE

CONTENTS• Safety Practices • System of Limits and Fits • Installation of MachineTools • Miscellaneous Examples of Installation • Machine Tool Testing• Lubrication • Inspection and Quality Control • Reliability andMaintainability • Maintenance • Maintenance Planning, Storage ofParts and Replacement Analysis • Engineering Materials• Corrosion—Its Control and Chemical Cleaning • Objective Questions• List of Experiments • References • Index.

MAINTENANCEENGINEERING AND

MANAGEMENT



`

CONTENTSUnit-I

Unit-II

Unit-IIIUnit-IV

Unit-V

• Reliability, Availability and Maintainability (RAM)• Maintainability,Availability and Reliability Improvement.

• Maintenance Strategies: Traditional and Advanced• Preventive, Corrective, Proactive Maintenance and Condition BasedMaintenance (CBM).

• Replacement Analysis • Fundamental Theory of Damages• Models: Waiting Time, Breakdown and Assignment Model

• Program Evaluation Review Technique (PERT).• Maintenance Management and Organization • Spare Parts

Inventory Management • Computer Aided Maintenance Planning,Installation and Testing • Maintenance Planning • Case Studies• PreviousYear Question Paper • Index.

CONTENTS• Introduction to NDT • Visual Inspection • Penetrant Testing • MagneticParticle Testing • Radiographic Inspection • Ultrasonic Testing • EDDYCurrent Testing •AppendicesAto E • Model Test Papers • Index.

Basic of

NON-DESTRUCTIVETESTING



`



`

ByDr. Subhash Chandra

ByLari & Kumar



ENGINEERINGGRAPHICSWith AUTOCAD



`

CONTENTS• Introduction • Lettering • Geometrical Construction • Scales• Dimension and Convention Representation • Orthographic Projection• Projection of Points and Lines • Projection of Planes • Projection ofSolids • Section of Solids • Development of Surfaces of Solids• Isometric Projection • Intersection of Surfaces • Projection ofAuxiliary Planes • Free Hand Sketching • AutoCAD • Nomography• Viva-Voce • Semester Units • Index.

ByB.K. GoelP.K. Goel

MACHINEDRAWING(With AutoCAD)

CONTENTS

ByB.K. GoelP.K. Goel

COMPUTERAIDED

MANUFACTURING



`

CONTENTS• Introduction to Numerical Control of Machine Tools • Introduction toAutomation • Numerical Control Machines • CNC Machines • ManualPart Programming • ComputerAided Part Programming • Tools for NC/CNC Machines • Electric Drives and Feedback Devices • GroupTechnology • Computer Aided Process Planning • FlexibleManufacturing System • Robotics •Artificial Intelligence • Index.

By

S. Vishal

CONTENTS• Introduction to Numerical Control of Machine Tools • NumericalControl Machines • CNC Machines • Manual Part Programming• Computer Aided Part Programming • Tools for NC / CNC Machines• Electric Drives and Feedback Devices • Flexible ManufacturingSystem • Robotics • Bibliography • Index.

An Introduction to

NC/CNCMACHINES



`

• Introduction • Blue Print Reading and Interconversion of View• Sectioning • Sketching • Screw Thread and Fasteners • Keys Cottersand Pin Joints • Couplings and Pipe Joints • Rivet and Welding Joints• Bearings and Brackets • I.C. Engine Parts • Steam Engine Parts• Boiler Mountings • Limits, Fits and Tolerances • Production Drawing• Gears • Jigs and Fixtures • Miscellaneous Machine Tools • AutoCAD• Specification of Materials • Viva Voice • Index.

By

S. Vishal



`



TOTAL QUALITYMANAGEMENT



`

CONTENTS

Circles, Shop improvement Group and Self Managing Work Teams• Benchmarking • TQM for Sales and Marketing Management • Business ProcessReengineering and Information Technology • SQC & SPC• Quality of After Sales Service• Terotechnology and Product Quality • Role of People in Quality Improvement • Reliabilityas a Quality Characteristics • Quality Leadership • Quality Linked Productivity • ProcessManagement for Improving Quality • ERP and Supply Chain Management • ValueEngg/Analysis and Management • Cost of Quality or Quality Cost • Quantum Quality orQuality Transformation • Quality Control for Export Units • The Quality Revolution• Concurrent Engineering • Team Building • Quality Maturity • Quality Discipline • QualityRepay • Design of Experiments •Achieving Total Commitment to Quality • Problem SolvingMethodology for Quality Improvement • Standardization and its Relevance on QualitySystems • Planning Process for TQM Implementation • Managing Change • Total SafetySystem for TQM • Quality Information Equipments Engineering • Corporate QualityAwards • ISO 9000-2000 • ISO 9001 (2000) • ISO 9004 (2000) • ISO 1400 & ISO 14001• Transition from QS 9000 to ISO/TS 16949-2002 • Six Sigma • Non-Destructive Testing• Diagnostic Maintenance and Condition Monitoring • Signature Analysis and TechnicalDiagnostics • ISO 15489-Managing Business Records • TL 900 Business ExcellenceAcceleration Model in Telecom • Mining the TQM Motherload • Planning Process• Mission Statement • Joint ISO-ILAC-IAF Communique-ISO 17025:2005 • Lean SixSigma • ISO 2000 • Occupational Health & Safety Management: OHSAS 18001 • PreviousYear Question Papers • Index.

ByDr. K. C. Arora

ISO 9000 to

OHAS 18001[ISO 9000 (2000), ISO 10006, 11, 12,

13, ISO 14000, SA 8000, ISO 2859,

ISO 16949, OHSAS 18001,

Six Sigma etc.)

Guidelines for Services • Quality Management and Quality System Elements Part 3Guidelines for Processed Materials ISO 9004-3 : 1993 • ISO 9004-4 (1993) QualityManagement and Quality System Elements Part 4 Guidelines for Quality Improvement• ISO 9004-5 • ISO 9004- 7 • QS 9000 for Automobile Industries (1998) • ISO 10006-1997Quality Management– Guidelines to Quality in Project Management • ISO 10011 : 1990Guidelines for Auditing Quality Systems • ISO 10012-1 : 1992 Quality AssuranceRequirements for Measuring Equipment • ISO 10013 Guidelines for Developing QualityManuals • Beyond ISO 9000 Horizon Adding Value for Customers • TQM EnvironmentManagement System • ISO 14004 Environmental Management Systems : General GuideLine on Principles, Systems & Supporting Techniques • ISO 14001 & Cleaner ProductionTechnology • Guidelines for Designing and Implementation EMS • Environmental Labeling• Life Cycle Assessment ISO 14040 to ISO 14043 • ISO 14060 • Environmental ImpactAssessment • SocialAccountability (SA) 8000 • Process Safety Code, Employee Health andSafety Code & Responsible Care for Chemical Manufacturers • Occupational Health andSafety • Occupational Health and Safety Management System : British Standard-BS 88001996 • Occupational Health and Safety Assessment Series : OHSAS 18001 • EstablishingInformation Network on Occupational Health and Safety • Recent Legislations andGovernment Action Programmes on Hazardous Chemicals Management • EnvironmentalAudit • Aituc’s Guidelines on ‘SHE’ • Hazardous Susbtances • Environmental, Health andSafety System of Compaq • National Environment Appellate Authority Act, 1997• Threshold Limit Values of Concentration of Chemical in Air • Biological & MedicalMonitoring • Control Methods or Hazards • Mode of Action of Hazards in Factories • ISO2859 • Low Waste Technologies • Six Sigma Quality Concept • Making the Transition fromQS 9000 to ISO TS 16949 (2002) • Six Sigma & Process Simulation • Putting the Wraps onNon-conforming Products •Appendices • Index.

CONTENTS• Introduction to Industrial Engineering • Productivity and WorkforceEnhancement • Manufacturing Cost Analysis • Materials Management• Quality Management • Production Planning and Control• Management Information Systems • Product Design andDevelopment • Ergonomics • Time Management • Forecasting• Material Requirement Planning (MRP) • Organisation • Supply ChainManagement • Examination Papers • Model Test Papers • Index.

INDUSTRIALENGINEERING AND




`

ByDr. K. C. Arora

ByAnmol Bhatia

• Introduction to ISO 9000 and Total Quality Management–TaguchiM e t h o d s • Q u a l i t y C o n t r o l , To t a l Q u a l i t y C o n t r o l • C u s t o m e rFocus • Total Waste Elimination • TQM Gurus • Total EmployeesInvolvement • Quality Assurance System • Quality of Product Design andDevelopment • Quality of Conformance • Continuous Quality Improvement• Inspection and Measurement (ISO/7025) • Quality in Service Organization • Quality

• ISO 9000:2000 • ISO 9000-1 (1994) Quality Management and Quality AssuranceStandards • ISO 9000-2 (1997) Quality Management and Quality Assurance Standards• ISO 9000-3 (1997) • ISO 9000-4 : 1993 Quality Management and Quality AssuranceStandards • ISO 9001 (1994 & 2000) • ISO 9002 (1994) • ISO 9003 (1994)• Documenting the Quality System • A Basic Guide to Implementing ISO 9000• Special Requirements for the Implementation of ISO 9000 System in SpecificOrganizations • ISO 9004 (1994 & 2000) • ISO 9004-1 : 1994 • ISO 9004-2 (1991) Part-2

CONTENTS



`


Size : 23 × 36/8Pages: 775 Approx.ISBN: 81-85749-14-0


`

By

J.B. Gupta

A Course in

ELECTRICALTECHNOLOGY


Price: 1400/-Thirteenth Edition: 2014

`

CONTENTS

A Course in

(Basic Electrical Engineering)Vol. I




`

CONTENTS• Current Electricity—Basic Concepts • DC Circuits • Units, Work, Power andEnergy • DC Network Analysis • Electro-Chemical Energy Sources andElectrolysis • Static Electric Field • Capacitance • Magnetism and Electro-Magnetism • Magnetic Circuits and Induction • Magnetic Hysteresis and EddyCurrents • Thermoelectricity • Electrical Installation and Wiring • Fundamentalsof Alternating Currents • Single Phase Series Circuits • Complex Notations andCircuitsAnalysis • Single Phase Parallel and Series Parallel Circuits • Resonancein R-L-C Circuits • Locus Diagrams • Applications of Network Theorems to ACCircuits • Polyphase Systems • Harmonics • Harmonics Analysis • Transients• Symmetrical Components • Electric Wave Filters • Laplace and FourierTransforms • Measurements, Instruments and Accessories • Galvanometers,Ammeters and Volmeters • Extensions of Instrument Range • Wattmeters andEnergy Meters • Miscellaneous Indicating Instruments • Potentiometers• Measurement of Resistance • Localization of Cable Faults • AC Bridges• Objective Type Questions withAnswers • Index.

VOLUME II: Electrical Machines

VOLUME III: Electronic Devices and Circuits

• Principles of Electromechanical Energy Conversion • Basic Concepts ofRotating Electrical Machines • Construction of DC Machines • ArmatureReaction and Commutation in DC Machines • Operating Characteristics andApplications of DC Generators • Parallel Operation of DC Generators• Operating Characteristics and Applications of DC Motors • Speed Control,Starting and Braking of DC Motors • Losses, Testing and Efficiency of DCMachines • Transformers • Transformer • Synchronous Generators orAlternators• Synchronous Motors • Parallel Operation ofAlternators • Construction, Theoryand Operation of Three Phase Induction Motors • Starting, Speed Control andBraking of Three Phase Induction Motors • Special Induction and PolyphaseCommutator Machines • Single Phase Motors • Special Electrical Machines• Electronic Control of Electric Motors • Objective Type Questions

• Introductory Concepts • Electron Dynamics • Electron Emission• Semiconductor Physics • Junction Diodes • Zeners and other Two TerminalDevices • Rectifiers • Bipolar Junction Transistors (BJTs) • Field EffectTransistors • Hybrid Parameters • Transistor Biasing and Stabilization • SingleStage Transistor Amplifiers • Amplifier Frequency Response • High- FrequencyTransistor • Multistage Amplifiers • Large Signal or Power Amplifiers• Feedback in Amplifiers • Tuned Amplifiers • Differential Amplifiers• Sinusoidal Oscillators • Modulation and Demodulation • OptoelectronicDevices • Power Semiconductor Devices • Wave Shaping Circuits • SwitchingCircuits (Multivibrators) • Integrated Circuits • Operational Amplifiers• Waveform Generators and Non-linear Circuits • The 555 IC Timer • ActiveFilters • Phase-Locked Loops (PLL) • Regulated and Switching Power Supplies• Number Systems and Codes • Logic Gates and Boolean Algebra • LogicCircuits • Digital Logic Families • Digital-To Analog and Analog-to-DigitalConverters • Microcomputers and Microprocessors • Electronic (Analog as Wellas Digital) Instruments • Cathode Ray Oscilloscope • Objective Type Questions•Appendices • Index.

By

J.B. Gupta

CONTENTSA Course in

(Electrical Machines)Vol. II


By

J.B. Gupta

VOLUME I: Basic Electrical Engineering• Current Electricity—Basic Concepts • DC Circuits • Units, Work, Power andEnergy • DC Network Analysis • Electro-Chemical Energy Sources andElectrolysis • Static Electric Field • Capacitance • Magnetism andElectromagnetism • Magnetic Circuits and Induction • Magnetic Hysteresisand Eddy Currents • Thermoelectricity • Electrical Installation and Wiring• Foundamentals of Alternating Currents • Single Phase Series Circuits• Complex Notations andCircuit Analysis • Single Phase Parallel and Series-Parallel Circuits • Resonance in R-L-C Circuits • Locus Diagrams• Applications of Network Theorems to AC Circuits • Polyphase Systems• Harmonics • Harmonics Analysis • Transients • Symmetrical Components• Electrica Wave Filters • Laplace and Fourier Transforms • Measurements,Instruments and Accessories • Galvanometers, Ammeters and Voltmeters•Extension of Instruments Range • Wattmeters and Energy Meters• Miscellaneous Indicating Instruments • Potentiometers • Measurement ofResistance • Localization of Cable Faults • AC Bridges • Objective TypeQuestions

• Principles of Electromechanical Energy Conversion • Basic Conceptsof Rotating Electrical Machines • Construction of DC Machines• Armature Reaction and Commutation in DC Machines • OperatingCharacteristics and Applications of DC Generators • Parallel Operationof DC Generators • Operating Characteristics and Application of DCMotor • Speed Control, Starting and Braking of DC Motors • Losses,Testing and Efficiency of DC Machines • Transformers • Transformers(Continued) • Synchronous Generators or Alternators • SynchronousMotors • Parallel Operation of Alternators • Construction, Theory andOperation of Three Phase Induction Motors • Starting, Speed Controland Braking of Three Phase Induction Motors • Special Induction andPolyphase Commutator Machines • Single Phase Motors • SpecialElectrical Machines • Electronic Control of Electric Motors • ObjectiveType Questions • Index.

ELECTRICAL ENGINEERING



A Course in

(Electronic Devices & Circuits)Vol. III


CONTENTS• Introductory Concepts • Electron Dynamics • Electron Emission• Semiconductor Physics • Junction Diodes • Zeners and Other Two TerminalDevices • Rectifiers • Bipolar Junction Transistors (BJTs) • Field Effect Transistors• Hybrid Parameters • Transistor Biasing and Stabilization • Single Stage TransistorAmplifiers • Amplifier Frequency Response • High-Frequency Transistor• Multistage Amplifiers • Large Signal or Power amplifiers • Feedback inAmplifiers • Tuned Amplifiers • Differential Amplifiers • Sinusoidal Oscillators• Modulation and Demodulation • Optoelectronic Devices • Power SemiconductorDevices • Wave Shaping Circuits • Switching Circuits (Multivibrators) • IntegratedCircuits • Operational Amplifiers • Waveform Generators and Nonlinear Circuits• The 555 IC Timer • Active Filters • Phase Locked Loops (PLL) • Regulated andSwitching Power Suppliers • Number Systems and Codes • Logic Gates andBoolean Algebra • Logic Circuits • Digital Logic Families • Digital-to Analog andAnalog-to-Digital Converters • Microcomputers and Microprocessors• Electronic (Analog as well as Digital) Instruments • Cathode Ray Oscilloscope• Objective Type Questions •Appendices • Index.

ByJ.B. Gupta

Theory & Performance of

ELECTRICALMACHINES

CONTENTS• Magnetic Circuits and Induction • AC Circuits • Principles ofElectromechanical Energy Conversion • Basic Concepts of RotatingElectrical Machines • Construction of DC Machines • Armature Reactionand Commutation in DC Machines • Operating Characteristics andApplications of DC Generators • Parallel Operation of DC Generators• Operating Characteristics andApplications of DC Motors • Speed Control,Starting and Braking of DC Motors • Losses,Testing and Efficiency of DCMachines • Single-Phase Transformers • Three-Phase Transformers• Special Transformers • Synchronous Generators or Alternators• Synchronous Motors • Parallel Operation of Alternators • Construction,Theory and Operation of Three-Phase Induction Motors • Starting, SpeedControl and Braking of Three-Phase Induction Motors • Fractional KilowattMotors • Special Electrical Machines • Electronic Control of ElectricMotors • Objective Type Questions

A Course in

ELECTRICALPOWER


Price: 625/-Fifteenth Edition : 2015

`



`

• AC Distribution • Insulation Resistance of a System • Interference ofPower Lines with Neighbouring Communication Lines • Extra HighVoltage (EHV) AC Transmission • High Voltage Direct Current(HVDC) Transmission • Construction, Testing and Commissioning ofOverhead Lines • Objective Type Questions.

• Introductory • Representation of Power System Components• Symmetrical Components • Symmetrical Fault Analysis• Unsymmetrical Fault Analysis • Fuses • Circuit Breaking • CircuitBreakers • Protective Relays • Static Relays • Protection of ACGenerators and Motors • Transformer Protection • Bus-Bar Protection• Protection of Feeders and Transmission Lines • Protection againstOvervoltages due to Lightning • Travelling Waves • Insulation Co -ordination • Power System Earthing • Voltage Control • Substations• Power System Stability • Power Flow Studies • Objective TypeQuestions.

• Electric Drives • Control Drives for Industrial Motors • ThyristorControl of Electric Motors • Motors for Particular Services.

• Electric Heating • Electric Welding • Illumination Engieering• Electrolytic Processes • Refrigeration andAir Conditioning.

• Traction Systems • Train Movement and Energy Consumption• Electric Traction Motors • Control of Traction Motors • Braking;Mechanical Considerations and Control Equipment • Power Supply forElectric Traction • Objective Type Questions • Index.

Part-III: Switchgear and Protection

Volume II: Utilization of Electric Power and Electric TractionSectionA: Electric Drives and IndustrialApplications

Section B: Electric Power Utilization

Section C: Electric Traction

CONTENTS

Volume I: Power SystemsPart-I: Generation and Economic Considerations

Part-II: Transmission and Distribution of Electrical Power

• Introductory • Hydroelectric Power Plants • Steam Power Plants• Nuclear Power Plants • Diesel Electric Power Plants • Gas TurbinePower Plants • Non-Conventional Methods of Power Generation• Selection of Power Plant • Economic Operation of Power Plants• Combined Operation of Power Plants • Environmental Aspects ofElectric Energy Generation • Cogeneration and Energy Consideration• Interconnected Systems • Power Plants Economics • Tariffs andPower Factor Improvement • Objective Type Questions.

• Supply Systems • Mechanical Design of Overhead Lines • OverheadLine Insulators • Corona • Transmission Line Constants •Performance of Short and Medium Transmission Lines • Performanceof Long Transmission Lines • Underground Cables • DC Distribution

Size : 23 × 36/8Pages: 1650 Approx.ISBN 13: 978-93-5014-374-2ISBN 10: 81-88458-53-8


`


ByJ.B. Gupta

ByJ.B. Gupta


A Course in

POWER SYSTEMS

Size: 23 × 36/8Pages : 1250 Approx.ISBN 13: 978-93-5014-373-5ISBN 10: 81-88458-52-X


`

CONTENTS

A Course in

ELECTRICALINSTALLATION

ESTIMATINGAND COSTING



`

CONTENTS• General Principles of Estimating • Wiring Systems • Wiring Materialsand Accessories • Earthing Systems • Inspection and Testing ofInstallations • Lighting Sub-Circuits • Lighting Schemes andCalculations • Internal Wiring Estimation • Electrical Installation forPower Circuits • Overhead Transmission and Distribution Line• Underground Distribution Lines • Installation of Service Connections• Substations • Ventilation-Electric Fans-Airconditioning • RemoteControl Wiring •Appendices • Index.

Part-I: Generation and Economic Considerations

Part-II: Transmission and Distribution of Electrical Power

Part-III: Switchgear and Protection

• Introductory • Hydroelectric Power Plants • Steam Power Plants• Nuclear Power Plants • Diesel Electric Power Plants • Gas TurbinePower Plants • Non Conventional Methods of Power Generation• Selection of Power Plant • Economic Operation of Power Plants• Combined Operation of Power Plants • Environmental Aspects ofElectric Energy Generation • Cogeneration and Energy Conservation• Interconnected Systems • Power Plants Economics • Tariffs andPower Factor Improvement • Objective Type Questions

• Supply Systems • Mechanical Design of Overhead Lines • OverheadLine Insulators • Corona • Transmission Line Constants • Performanceof Short and Medium Transmission Lines • Performance of LongTransmission Lines • Underground Cables • DC Distribution • ACDistribution • Insulation Resistance of a System • Interference of PowerLines with Neighbouring Communication Lines • Extra High Voltage(EHV) AC Transmission • High Voltage Direct Current (HVDC)Transmission • Construction, Testing and Commissioning of OverheadLines • Objective Type Questions

• Introductory • Representation of Power System Components• Symmetrical Components • Symmetrical Fault Analysis• Unsymmetrical Fault Analysis • Fuses • Circuit Breaking • CircuitBreakers • Protective Relays • Static Relays • Protection of ACGenerators and Motors • Transformer Protection • Bus-Bar Protection• Protection of Feeders and Transmission Lines • Protection againstOvervoltages due to Lightning • Travelling Waves • Insulation Co-ordination • Power System Earthing • Voltage Control • Substations• Power System Stability • Power Flow Studies • Objective TypeQuestions • Index.

By

J.B. Gupta



`

CONTENTS• Introductory • Hydroelectric Power Plants • Steam Power Plants• Nuclear Power Plants • Diesel Electric Power Plants • Gas TurbinesPower Plants • Non-Conventional Methods of Power Generation• Selection of Power Plant • Economic Operation of Power Plants• Combined Operation of Power Plants • Environmental Aspects ofElectric Energy Generation • Cogeneration and Energy Conservation• Interconnected Systems • Power Plants Economics • Tariffs and PowerFactor Improvement • Substations • Major Electrical Equipment inPower Plants • Objective Type Questions • Index.

GENERATIONAND

ECONOMICCONSIDERATIONS

By

J.B. Gupta

By

J.B. Gupta



Utilization of

ELECTRIC POWER&

ELECTRIC TRACTION

CONTENTSSection-A: Electric Drives and IndustrialApplications

Section-B: Electric Power Utilization

Section- C: Electric Traction

Section-D: Economic Considerations

• Electric Drives • Control Devices for Industrial Motors • Thyristor Controlof Electric Motors • Motors for Particular Services.

• Electric Heating • Electric Welding • Illumination Engineering• Electrolytic Processes • Refrigeration andAir Conditioning.

• Traction Systems • Train Movement and Energy Consumption • ElectricTraction Motors • Control of Traction Motors • Braking : MechanicalConsiderations and Control Equipment • Power Supply for Electric Traction.

• Economic Considerations • Tariffs and Power Factor Improvement• Objective Type Questions • Index.

ByJ.B. Gupta

SWITCHGEARAND

PROTECTION

CONTENTS• Introductory • Representation of Power System Components• Symmetrical Components • Symmetrical Fault Analysis• Unsymmetrical Fault Analysis • Fuses • Circuit Breaking • CircuitBreakers • Protective Relays • Static Relays • Protection of ACGenerators and Motors • Transformer Protection • Bus-Bar Protection• Protection of Feeders and Transmission Lines • Protection AgainstOvervoltages due to Lightning • Travelling Waves • Insulation Co-ordination • Power System Earthing • Voltage Control • Substations• Power System Stability • Power Flow Studies • Objective TypeQuestions • Index.

ByJ.B. Gupta

TRANSMISSIONAND

DISTRIBUTION OFELECTRICAL POWER



`

CONTENTS



`



`

• Supply Systems • Mechanical Design of Overhead Lines • OverheadLine Insulators • Corona • Transmission Line Constants • Performanceof Short and Medium Transmission Lines • Performance of LongTransmission Lines • Underground Cables • DC Distribution • ACDistribution • Insulation Resistance of a System • Interference of PowerLines with Neighbouring Communication Lines • Extra High Voltage(EHV) AC Transmission • High Voltage Direct Current (HVDC)Transmission • Construction, Testing and Commissioning of OverheadLines • Neutral Grounding • Voltage Control • Power System Stability• Power Flow Studies • Objective Type Questions • Index.

Size : 20 × 30/8Pages : 1250 Approx.ISBN : 81-85749-37-X


`

By

J.B. Gupta

CONTENTSFundamentals of

ELECTRICALENGINEERING

ANDELECTRONICS

Part-I: Electrical Engineering

Part-II: Electronics Engineering

• Current Electricity—Basic Concepts • DC Circuits • Units, Work, Power and Energy • DCNetwork Analysis • Electrochemical Energy Sources and Electrolysis • Static Electric Field• Capacitance • Magnetism and Electromagnetism • Magnetic Circuits and Induction• Magnetic Hysteresis and Eddy Currents • Fundamentals of Alternating Currents • SinglePhase Series Circuits • Complex Notations and Circuit Analysis • Single Phase Parallel andSeries-Parallel Circuits • Resonance in R-L-C Circuits • Three PhaseAC Circuits • ElectricalMeasuring Instruments • Transformers • Principles of Electromechanical EnergyConversion and Basic Concepts of Rotating Electrical Machinees • DC Generators • DCMotors • Synchronous Generators • Synchronous Motors • Three Phase Induction Motors• Single Phase Motors • Electrical Installation and Wiring • Illumination.

• Introductory Concepts • Basic Semiconductor and P-NJunction Theory • Semiconductor Diodes • Diode Applications • Bipolar JunctionTransistors (BJTS) • Small Signal Low Frequency Transistor Amplifier • Field EffectTransistors (FETs) • Thyristors • Optoelectronic Devices • Integrated Circuits • NumberSystems and Codes • Logic Gates and Boolean Algebra • Electronic Instruments • ObjectiveType Questions • Index.

ByJ.B. Gupta



A Textbook of




`

CONTENTS

ELECTRICALMACHINES

(AC & DC Machines)



`

CONTENTSUnit-I: TransformersUnit-II: DC Machines

Unit-III: Three phase Induction Motors

Unit-IV: Three-Phase Synchronous Machines

Unit-V: Fractional Horse Power Motors and IndustrialApplications

• Transformers• DC Generators • Operating Characteristics

andApplications of DC Motors • Starting, Speed Control and Testing ofD.C. Machines.

• Construction, Theory andOperation of Three phase Induction Motors • Starting and SpeedControl of Three-phase Induction Motors.

• SynchronousGenerators orAlternators • Synchronous Motors.

• Fractional Horse Power Motors • IndustrialApplications • Model Test Papers • Index.

• Introductory Concepts• DC Circuit Analysis

and Network Theorems

• AC Fundamentals • Single Phase Series Circuits • Complex Notations andCircuit Analysis • Single Phase Parallel and Series-Parallel Circuits• Resonance in R-L-C Circuits .

• Three-phaseAC Circuits • Measuring Instruments

• Introduction to Earthing and ElectricalSafety • Magnetic Circuits • Singlephase Transformers

• DC Machines-I (Generators) • DC Machines-II(Motors) • Threephase Induction Motor • Single-phase Induction Motor• Three-phase Synchronous Machines • Eperiments •Examination Papers• Index.

Unit-I: DC Circuit Analysis and Network Theorems

Unit-II : Steady-StateAnalysis of Single PhaseAC Circuits

Unit-III : Three-phase AC Circuits and Measuring Instrument

Unit-IV : Introduction to Earthing and Electrical Safety, Magnetic Circuitand Single-Phase Transformers

Unit-V : Electrical Machines

By

J.B. Gupta

Size: 20 × 30/8Pages: 600 ApproxISBN: 81-88458-26-0


`

CONTENTS• Measurements and Measurement Systems • Units and Standards ofMeasurements • Errors in Measurements and Their Analysis• Measuring System Fundamentals • Analog Ammeters and Voltmeters• Extension of Instrument Range • Analog Measurement of Power andWattmeters • Measurement of Energy and Energy Meters• Measurement of Speed, Frequency and Power Factor • Measurementof Resistance • Potentiometers • AC Bridges • Magnetic Measurements• Digital Measurement of Electrical Quantities • Signal Analyzers• Cathode Ray Oscilloscope • Examination Papers • Index.

ELECTRICALMEASUREMENTSAND MEASURING

INSTRUMENTS

By

J.B. Gupta

By

J.B. Gupta

BASICELECTRICAL

ENGINEERING

CONTENTS• Introductory Concepts • Electrical Circuit Analysis • Alternating (Sinusoidal)Voltage and Current • Single PhaseAC Circuits • PhasorAlgebra andAC Circuits• Three Phase AC Circuits • Magnetism and Electromagnetism • MagneticCircuits • Transformers • Principles of Electromechanical Energy Conversionand Basic Concepts of Rotating Electrical Machines • DC Machines-I(Generators) • DC Machines-II (Motors) • Three-Phase Synchronous Machines(Generators and Motors) • Three Phase Induction Motors • Single PhaseInduction Motors • Electrical Measuring Instruments • Laboratory Practicals• Objective Type Questions • Examination Papers • Previous Year SolvedExamination Paper • Index.

ByJ.B. Gupta



`



ELECTROMECHANICALENERGY

CONVERSION-I

CONTENTSUnit-I: Principles of Electromechanical Energy Conversion

Unit-II: DC Machines

Unit-III: DC Machines (Continued)

Unit-IV: Single Phase Transformer

Unit-V: Three Phase Transformers

• Magnetic Circuits and Induction • Principles of Electromechanical EnergyConversion • Basic Concepts of Rotating Electrical Mechines

• Construction of DC Machines • Armature Reaction and Communitation inDC Machines • Operating Characteristics and Applications of DCGenerators

• Operating Characteristics andApplications of DC Motors • Speed Control,Starting and Testing of DC Machines

• Single Phase Transformers

• Three Phase Transformers • Question Papers • Index.ByJ.B. Gupta


CONVERSION-II

CONTENTSUnits I & II: Synchronous Machines

Unit-III: Three Phase Induction Machines-I

Unit-IV: Three Phase Induction Machines-II

Unit-V: Single Phase AC Motors

• Synchronous Generators or Alternators • Parallel Operation ofAlternators • Synchronous Motors.

• Rotating Magnetic Fields • Three Phase Induction Machines-I.

• Three-Phase Induction Machines-II.• Single Phase Induction Motors

• AC Commutator Motors • Model Test Papers • Examination Papers• Index.

ByJ.B. Gupta

ByJ.B. Gupta


CONVERSION

Size: 20 × 30/8Pages: 475 Approx.ISBN: 81-85749-34-5


`

CONTENTS



`



`

Section-A: Magnetic Circuits and Induction

Section-B: DC Machines

Section-C: Synchronous Machines

Section-D: Three Phase Transformers and Induction Machines

• Magnetic Circuits and Induction

• DC Generators • DC Motors

• Synchronous Generators • Synchronous Motors

• Transformers • 3-Phase Induction Machines • Single Phase Motors• Model Test Papers • Examination Papers • Index.

Size : 20 × 30/8Pages: 600 Approx.ISBN: 978-93-80027-62-3


`

By

J.B. Gupta

CONTENTSA Textbook of


SectionA: DC Network Laws and Theorems

Section B: Single-PhaseAC Circuits

Section C: Three-PhaseAC Circuits and Transformers

Section D: Electrical Machines and Measuring Instruments

• DC Circuits • Network Theorems (NetworkAnalysis).

• AC Fundamentals • Single-Phase Series Circuits • Complex Notations andCircuit Analysis • Single-Phase Parallel and Series-Parallel Circuits• Resonance in R-L-C Circuits.

• Three-PhaseAC Circuits • Transformers.

• DC Machines-I (Generator) • DC Machines-II (Motors) • Three-PhaseInduction Motor • Single-Phase Induction Motors • Three-PhaseSynchronous Machines • Electrical Measuring Instruments • TransientResponse • Lab Practicals • Question Papers • Index.



An Integrated Course in

(With More than 15,000Objective Type

Questions & Answers)




`

CONTENTS

Elements of

POWER SYSTEMS



`

CONTENTSUnit-I : Power System Components, Supply System and Transmission Lines

Unit-II : Overhead Transmission Lines

Unit-III : Corona and Interference Electrostatic and ElectromagneticInterference with Communication Lines and Overhead Line Insulators

Unit-IV : Mechanical Design of Transmission Line and Insulated Cables

Unit-V : Neutral Grounding and EHVAC and HVDC Transmission

• Power System Components • Supply System • Transmission Lines.

• Inductance and Capacitance of Transmission Lines • Representation andPerformance of Short and Medium Transmission Lines • Representation andPerformance of Long Transmission Lines.

• Corona • Electrostatic and Electromagnetic Interference with CommunicationLines • Overhead Line Insulators.

• Mechanical Design of Transmission Lines • Insulated Cables.

• Neutral Grounding • Extra High Voltage (EHV) AC Transmission • HighVoltage Direct Current (HVDC) Transmission • Examination Papers • Index.

Section-I: Electrical Engineering •

Section-II: Electronics

Section-III: Measurements, Instrumentation and Control

DC Basics and Networks andElectromagnetic Theory • AC Basics and Networks • DC Machines • ACMachines • Electrical Engineering Materials • Electrical Machine Design• Electrical Installation and Wiring • Electrical Power Generation and EconomicConsiderations • Transmission and Distribution of Electrical Power• Switchgear and Protection • Electrical Energy Utilization and ElectricTraction.

• Electronic Components and Devices• Analog Electronics • Industrial and Power Electronics • Digital Electronics• Microprocessors • Communication System

• Electronic andElectrical Measurements and Instruments • Electrical and ElectronicInstrumentation • Control Systems • Model Test Papers • References.

By

J.B. Gupta



`

CONTENTSUnit-I : Representation of Power System Concepts

Unit-II: Unsymmetrical Faults Analysis

Unit-III: Load FlowsUnit-IV: Power System StabilityUnit-V : Travelling Waves

• Introductory• Representation of Power System Components • SymmetricalComponents • Symmetrical FaultAnalysis

• Unsymmetrical FaultsAnalysis.

• Load Flows.• Power System Stability

• Travelling Waves • Protection AgainstTravelling Waves • Examination Papers • Index.

POWER SYSTEMANALYSIS

By

J.B. Gupta

By

J.B. Gupta

Question Bank in

(With More than 17,000 ObjectiveType Questions & Answers)


CONTENTSSection-I: Electrical Engineering



• DC Basics and Networks andElectromagnetic Theory • AC Basics and Networks • DC Machines• AC Machines • Electrical Engineering Materials • Electrical MachineDesign • Electrical Installation and Wiring • Electrical PowerGeneration and Economic Considerations • Transmission andDistribution of Electrical Power • Switchgear and Protection • ElectricalEnergy Utilisation and Electric Traction.

• Electronic Components and Devices •AnalogElectronics • Industrial and Power Electronics • Digital Electronics• Microprocessors • Communication System.

• Electronics and Electrical Measurements and Instruments • Electricaland Electronic Instrumentation • Control Systems • Model Test Papers• References.

ByJ.B. Gupta



`

Two Colours Edition



Fundamentals of

SWITCHGEAR ANDPROTECTION

CONTENTSUnit-I: Introduction to Protection System and Relays

Unit-II: RelayApplication and Characteristics and Static Relays

Unit-III: Protection of Transmission Lines

Unit-IV: Circuit Breaking and Testing of Circuit Breakers

Unit V: Apparatus Protection and Circuit Breakers

• Introductionto Protection System • Relays

• RelayApplication and Characteristics • Static Relays.

• Protection of Transmission Lines.

• Circuit Breaking • Testing of Circuit Breaker.• Protection of

AC Generators and Motors • Transformer Protection • Circuit Breakers• University Question Papers • Index.

ByJ.B. Gupta

ELECTRICALMACHINES-I

CONTENTSSection-A: Transformers

Section-B: Transformers (Continued)

Section-C: DC Machines (Generators)

Section-D: DC Machines (Motors)

• Transformers.

• Transformers (Continued).

• Construction of DC Machines •Armature Reaction and Commutationin DC Machines • Operating Characteristics and Applications of DCGenerators .

• Operating Characteristics and Applications of DC Motors • SpeedControl Starting and Braking of DC Motors • Losses, Testing andEfficiency of DC Machines • Model Test Papers • Examination Papers(Solved) • Index.By

J.B. Gupta

ByJ.B. Gupta

ELECTRICALMACHINES-II



`

CONTENTS



`



`

SectionA: Polyphase Induction Machines

Section B: Single Phase Induction Motors

Section C: Synchronous Generator

Section D: Synchronous Motors

• Rotating Magnetic Fields • Construction, Theory and Operation ofThree Phase Induction Machines • Starting and Speed Control of ThreePhase Induction Motors.

• Single Phase Induction Motors .

• Synchronous Generator.

• Synchronous Motors • Model Test Papers • Examination Papers• Index.



`By

J.B. Gupta

CONTENTSELECTRICALSCIENCE

(For AMITY University)

Module-I: Electrical Quantities

Module-II: NetworkAnalysis Techniques

Module-III:Alternating Current Circuits

Module-IV: Network Theorems

Module-V: Electromagnetism

Module-VI: Transformers

• Electrical Quantities.

• NetworkAnalysis Techniques.

• Fundamentals of Alternating Currents • Single Phase AC Circuits• Phasor Algebra and AC Circuits • Resonance in R-L-C Circuits• Three-phaseAC Circuits.

• Network Theorems

• Electromagnetism, Magnetism Circuits and Induction.

• Transformers • Objective Type Questions • Index.




(RTU)



`

CONTENTS




`

CONTENTS• Introductory Concepts.

:• DC Circuits.

• AC Fundamentals • Single Phase Series Circuits • Complex Notationsand CircuitAnalysis • Single Phase Parallel and Series- Parallel Circuits• Resonance in R-L-C Circuits • Three-PhaseAC Circuits .

•Ammeters and Voltmeters • Wattmeters and Energy Meters .

• Magnetic Circuits • Transformers • DC Motors • Three PhaseInduction Motor • Special Electric Motors • Objective Type Questions• Model Papers • Index.

Unit-I: DC Circuits

Unit-II:AC Circuits:

Unit-III: Measurement Instruments:

Unit-IV: Transformer and Rotating Machines:

Unit-I: Magnetic Circuits & Electromechanical Energy Conversion

Unit-II: DC Generators

Unit III: DC Motors

Unit-IV: Transformers

Unit-V: Polyphase Transformer

• Magnetic Circuits • Electromechanical Energy Conversion .

• Construction of DC Machines • Armature Reaction and Commutation inDC Machines • Operating Characteristics and Applications of DCGenerators.

• Operating Characteristics andApplications of DC Motors • Speed Control,Starting and Braking of DC Motors • Losses, Testing and Efficiency of DCMachines.

• Transformers.

• Polyphase Transformers • Model Test Papers • Index.

By

J.B. Gupta



`

CONTENTSUnit-I: Electric Heating

Unit-II: Electric Welding and Electrolytic Processes

Unit-III: Illumination and Refrigeration andAir-Conditioning

Unit-IV: Electric Traction-I

Unit-V: Electric Traction-II

• Electric Heating.

• Electric Welding • Electrolytic Processes.

• Illumination • Refrigeration andAir-Conditioning.

• Traction Systems • Train Movement and Energy Consumption.

• Electric Traction Motors • Control of Traction Motors • Braking:Mechanical Considerations and Control Equipment • Power Supply forElectric Traction • Systems of Electric Traction • Examination Papers• Index.

Utilization of

ELECTRIC ENERGYAND TRACTION

ByJ.B. Gupta

Rajeev ManglikRohit Manglik

By

J.B. Gupta


(RTU)

CONTENTSUnit-I:AC Machine Fundamentals

Unit-II: Polyphase Induction Motor

Unit-III: Single Phase Induction Motor & Special Machines

Unit-IV: Synchronous Generators (Alternators).

Unit-V: Synchronous Motors

•AC Machine Fundamentals.

• Construction, Theory and Operation of Three Phase InductionMachines • Starting and Speed Control of Three Phase InductionMotors .

• Single Phase Induction Motor • Special Machines.

• Synchronous Generators (Alternators)

• Synchronous Motors • Model Test Papers • Index.

ByJ.B. Gupta



`



BASICELECTRICITY

CONTENTSUnit-I: Electrostatics

Unit-II: DC Circuits

Unit-III: Basic Magnetism and Electromagnetism

Unit-IV:AC Theory and Measuring Instruments

Unit-V: Voltage and Current Sources and Circuit Theorems

• Static Electric Field • Capacitors .

• OHM’S Law, Units, Work, Power and Energy • DC Circuits .

• Magnetism and Electromagnetism • Electromagnetic Induction .

•AC Theory • Measuring Instruments .

• Voltage and Current Sources • Network Theorems • LaboratoryPracticals • Objective Type Questions • Index.

Elements of

ELECTRIC DRIVES

CONTENTS• Electric Drives • Control Devices for Industrial Motors • ThyristorControl of Electric Motors • Motors for Particular Services• Examination Papers • Index.

By

J.B. GuptaRajeev ManglikRohit Manglik

ByRajeev Manglik

A Textbook of


Size: 23 × 36/16Pages : 275 Approx.ISBN : 978-93-5014-241-7


`

CONTENTS



`



`

• Measuring Instruments • Generalised Treatment of ElectricalMachines • Three-phase Supply • DC Machines • Transformers • Three-phase AC Motors • Single Phase Fractional Kilowatt Motors• Laboratory Practicals • Objective Type Questions.



` By

J.B. GuptaRenu Gupta

CONTENTSELECTRICALENGINEERINGMATERIALS &

SEMICONDUCTORDEVICES

Unit 1 : Conducting Materials

Unit 2 : Dielectric Materials

Unit 3 : Magnetic Materials

Unit 4 : Semiconductors

Unit 5 : Construction and Characteristics of Devices

Unit 6 : Bipolar and MOS Devices

Unit 7 : Power Devices

• Conducting Materials .

• Dielectric Materials.

• Magnetic Materials.

• Semiconductors.

• Construction and Characteristics of Semiconductor Devices.

• Bipolar Junction Transistors (BJTs) • MOS (Metal-Oxide Semiconductor)Devices (JFETs, MOSFETs and UJJ).

• Power Devices •Appendices • Model Papers • Index.

By




ELECTRICALMACHINES AND

AUTOMATICCONTROL



`

CONTENTS

A Textbook of

POWER SYSTEMOPERATION AND

CONTROL



`

CONTENTS• Introduction to Power System • Load Curves • Load Flow Algorithms• Optimal Load Flow • Power Generation • Stability • Load FrequencyControl • Automatic Voltage Controller (AVC) • Control of Voltage andReactive Power • Flexible AC Transmission Systems (FACTS) • HighVoltage Direct Current • Supervisory Control And Data Acquisition(SCADA) • Appendix • Bibliography • Model Question Papers• Examination Paper • Index.

Part-I : Electrical MachinesUnit-I : Transformers and DC Motors

Unit-II:AC Generators and Motors

Part-II:Automatic ControlUnit-III: Modeling of Mechanical System, Control System and Signals

Unit-IV: Time ResponseAnalysis and Stability

Unit-V : Root Locus Techniques, Frequency Response Analysis andProcess Control

• Transformers • DC Motors .

• Three-Phase Induction Motors and Servomotors • Synchronous Machines(Alternator and Synchronous Motor).

• Control System.

• Time ResponseAnalysis and Stability.

• Root Locus • Miscellaneous Problems • Objective Type Questions withAnswers • Examination Paper • Index.

By

K. Nisha



`

CONTENTS• The Design Problem • Materials for Electrical Machines • Heating,Cooling and Ventilation of Electrical Machines • Magnetic CircuitCalculations • Electromagnets • Electrical Circuits:Armature Windings• Transformer • Three Phase Induction Motor • Single Phase InductionMotor • Synchronous Machines • D.C. Machine • Starters, FieldRegulators and Auxiliary Apparatus • Mechanical Design • ComputerAided Design • Tables of Standard Specifications • Design ofDistribution System • Objective Type Questions • References • Index.

Principles of

ELECTRICALMACHINE DESIGN

ByR.K. Agarwal

By

J.B. GuptaS. Hasan Saeed

NON-CONVENTIONALENERGY RESOURCES

CONTENTS• Introduction to Non-Conventional Energy Resources • GeothermalEnergy • Solar Cells • Solar Thermal Energy • Solar Photovoltaics• Magneto-Hydro Dynamics (MHD) Power Generation • Fuel Cells• Thermoelectrical and Thermionic Conversions • Wind Energy • Bio-Energy–Biomass and Biogas • Ocean Thermal Energy Conversion(OTEC) • Ocean Wave Energy and Tidal Energy • Energy Storage• Energy Management System • Appendices • Model Question Papers• Index.

ByS. Hasan SaeedD.K. Sharma



`




MATERIALS

CONTENTS•An Overview of Engineering Materials • Crystal Structure of Materials• Structural Imperfections • Magnetic Properties of Materials• Conductivity of Metals • Materials for Electrical Engineering• Semiconducting and Superconducting Materials • ElectronicComponents • Conceptual Questions and Answers • Tables • Model andExamination Papers • Index.

ByDr. Rakesh Dogra


DRAWING-I

CONTENTS• Conventional Symbols • Lighting Circuit and Accessories • Light andFan Circuits • Simple Bell Circuit • Relay Operated Alarm Circuits•Annunciators • Electrical Drawing.

BySurjit Singh

BySurjit Singh


DRAWING-II



`

CONTENTS

Size : 20 × 30/8Pages : 225 Approx.SBN : 978-93-5014-305-6


`



`

• Conventional Symbols • Wiring Material for Domestic and SmallIndustries Wiring • Wiring Installation in Small Residences • DomesticWiring Estimates • Power Wiring Estimates for Small Industries• Consumer’s Installation of Service Connections • Contactor ControlCircuits • Power Distribution Sub station and Stations • ElectronicCircuits and Symbols • Earthing Electric Shock • Drawing of MachineParts.

Size: 20 × 26/8Pages : 325 Approx.ISBN : 978-93-5014-363-6


`By

M.L. Anand

CONTENTSELECTRICALMEASUREMENTSAND MEASURING

INSTRUMENTS

• Basic Concepts • Essentials of Analog Instruments • Galvanometers,Ammeters & Voltmeters • Wattmeters & Energy Meters • PolyphaseSystems and Measurement of Power • Measurement of Resistance :Earth Tester & Meggar • Measurement of Inductance and Capacitance(AC Bridges) • Miscellaneous Electrical Instruments • ElectronicInstruments • Measurement of Non-Electrical Quantities (Transducers)• ShortAnswer Questions • Solved Question Papers • Practicals • Index.



BASICELECTRICAL

ENGINEERING



`

CONTENTS

ELECTRICALMEASUREMENT

AND MEASURINGINSTRUMENTS



`

CONTENTS• Introduction to Electrical Measuring Instruments • MeasuringInstruments • Miscellaneous Measuring Instruments • Cathode RayOscilloscope (CRO) • Power Measurement in 3-Phase Circuit• Transducer • Measurement of Resistance, Inductance and Capacitance• Practicals • Examination Papers • Index.

• DC Circuits • DC Circuit Theorems • Constant Voltage and ConstantCurrent Sources • Electromagnetic Induction • Batteries • ACFundamentals • AC Circuits • Various Types of Power Plant • Practicals• Index.

By

Tarlok Singh



`

CONTENTS• Electric Drives • Illumination • Electric Heating • Electric Welding• Electrolytic Processes • Refrigeration and Air Conditioning • ElectricTraction • Experiments • Examination Question Papers • Index.

UTILIZATION OFELECTRIC ENERGY(Including Electric Drives and

Electric Traction)

ByTarlok Singh

ByTarlok Singh

INSTALLATIONCOMMISSIONING &MAINTENANCE OF

ELECTRICALEQUIPMENTS

CONTENTS• Inspection & Installation of Machines • Maintenance • Installation,Commissioning and Testing of Transmission and Distribution Lines• Underground Cables • Substations • Accidents • Experiments• Question Paper • Index.

ByTarlok Singh



`




CONTENTS• Introduction to Electrical Machines • D.C. Machines • Transformer(Single Phase) • Three Phase Transformer • Solution of Problems• Practicals • State Board Question Papers • Index.

ByTarlok Singh


CONTENTS• Synchronous Machines • Induction Motors • Fractional K.W. (FKW)Motors • Special Purpose Machines • Solution of Problems • Practicals• State Board Question Papers • Index.

ByTarlok Singh

ByTarlok Singh

ELECTRICALPOWER-II

(Power System Protection)



`

CONTENTS



`



`

• Power System Faults • Economics of Generation • Switchgears• Protection Devices • Protection Scheme • Over-voltage Protection• Experiments • Examination Paper • Index.



`By

Tarlok Singh



• Applications and Advantages of Electrical Energy • Basic ElectricQuantities • Batteries • DC Circuits • Magnetism and Electromagnetism• Electromagnetic Induction • AC Fundamentals • Polyphase System• Various Types of Power Plants • Laboratory Practicals • PreviousYearsFully Solved Question Papers • Examination Papers • Index.



ELECTRICALSCIENCE



`

CONTENTS

TRANSMISSIONAND

DISTRIBUTION(Electrical Power I)



`

CONTENTS• Main Resources of Energy • Transmission System • DistributionSystem • Substations • Faults • Power Factor • Various Types of Tariffs• Miscellaneous Questions and Answers • Previous Question Papers• Index.

• D.C. Circuits • Batteries • Magnetism and Electromagnetism• Electromagnetic Induction • AC Theory • Polyphase Systems• Experiments • Index.

By

Tarlok Singh



`

CONTENTS• Introduction to Traction System • System of Power Supply • OverheadEquipment • Study of Drives • Control of Motors • Electrical Braking• Examination Papers • References • Index.

An Introduction to

ELECTRICTRACTION

BySachidananda Mallick

Rupali G. Nazar

By

Tarlok Singh

Elements of

ELECTRICAL ANDELECTRONICS

CONTENTS• General Introduction • Measuring Instruments • D.C. Machine(Motors and Generators) • Transformer • Synchronous Machines• Induction Motors • Basic Electronics • Practicals & Experiments.

ByTarlok Singh



`



ENERGYMANAGEMENT

CONTENTS• Non-Conventional Energy Sources • Energy Management • EnergyConservation • Material and Energy Balance • Energy Management inIndustrial Sector • Economics of Efficient Energy Use and EnergyEfficient Technology • Energy Audit • Applications of Computer inEnergy Management • Energy and Environment • EnvironmentalImpactAssessment •Appendices • Index.

ByUmesh Rathore

Basic InstrumentationSystem and

PROGRAMMABLELOGIC CONTROLLER

CONTENTS• Introduction to Instrumentation • Transducers • Signal Conditioning• Output Devices and Displays • Introduction to PLCs • Working of PLC• Instruction Set • Ladder Diagram Programming • Other ProgrammingLanguages for PLC • Applications of PLC • Introduction to 8051Microcontroller •Appendix • Index.

ByUmesh Rathore

ByUmesh Rathore

INDUSTRIALINSTRUMENTATION



`

CONTENTS



`



`

• Measurements • Sensors and Transducers • Displacement and StrainMeasurement • Measurement of Forces, Torque and Angular Velocity• Pressure Measurement • Flow Measurement • TemperatureMeasurement • Level Measurement • Measurement of Humidity,Moisture, Viscosity and pH • Introduction to Control System• Advanced Control Techniques • Overview of Process Controllers(SCADA, DCS, DAS, Data Loggers) • Introduction to ProgrammableLogic Controller (PLC) • Objective Type Questions • Experiments•Appendices • Examination Paper • Index.



`By

Er. R.S. Dahiya

CONTENTSSUB-STATIONENGINEERINGDESIGN, CONCEPTS

AND COMPUTERAPPLICATIONS

• Development of Indian Power Sector and Grid Management • Distribution ofPower • Sub-Station • Power Transformers • Reactive Power Management• Fundamentals of Earthing and Design of Earthmat • Load Management• Capacitor Banks • Over Head Insulators • Current Transormers • VoltageTransformers • Station Battery and Charging Equipment • Economic Operationof Power System • Supply System • HVDC • Power System Stabilities• Computer Application-with Sub-Station Engineering • Voltage Control andVoltage Stability • Circuit Breakers • Fuse • Transmission Line Design• Protection Against Overvoltage • Bus-Bar Protection • Protective Relays• Calculation of Short Circuit Current • System Restoration Process/Black StartProcedure • Generation of Electric Power • Introduction to IEGC • TechnicalStandards for Construction of Sub-Stations • Substation Automation System(SAS) • Management of Distribution and Transmission Network Using GIS• Gas Insulation Substation •Appendix • Bibliography • Index.



POWER SYSTEMSAND

PROTECTION



`

CONTENTS

SENSORSAND

INSTRUMENTATION



`

CONTENTS• Introduction • Displacement Sensors and Strain Gauges • Pressure andTemperature Sensors • Flow Sensors and Level Sensors • Signals, Bridges andProcessing Circuits • Digital Processing of Analog Signal • Display Devices• Recorders • Virtual Instrumentation • Data Transmission and Telemetry• Measurement Errors • Voltmeters and Multimeters • DC and AC BridgeCircuits • Signal Analysis • Relays, Circuit Breakers and Intelligent ElectronicSensors • Metrology and Inspection • Supplementary on PressureMeasurements • Supplementary on Flow Measurements • Supplementary onTemperature Measurements • Supplementary on Level Measurements• Process Industries • Chemical Processes • Food Processing • EnvironmentalAnalysis and Monitoring • Glossaries • Appendices • Sample Question Papers• References • Index.

• Basics of Power System Growth • Power System’s Electrical Basics• Transmission Line Parameters • Performance of Transmission Line in PowerSystem • Overhead Insulators & Underground Cables • Control of Voltage,Load Frequency and Power in Transmission System • Essentials of MechanicalDesign of Transmission Line • Extra High Voltage and High Voltage DC• Transients in Power System • Power System Stability • Load Flow Analysis• Symmetrical and Unsymmetrical Fault Calculation • Substations • Protectionin Power System • Protection of Equipments in Power System • DC, ACDistribution System • Tariffs and Electricity Energy Audit • Economic LoadDespatch Load Frequency Control, Compensation •Appendix • Index.

By

Dr. O.N. Pandey



`

CONTENTS• Introduction • Reliability Mathematics • Reliability Data, Recoveryand Analysis • Reliability • Reliability Improvement • ReliabilityTesting • Electronic System Reliability • Software Reliability • TotalQuality Management (TQM) • Quality Management System • ISO9000: Quality Management System • Quality System Assessment• General Maintenance • Predictive Maintenance (PDM) • ParetoPrinciple • Swot Analysis • ISO:14000 Series • Value Engineering•Appendices • Index.

RELIABILITYENGINEERING

ByOnkar N. PandeyBhupesh Aneja

By

N.K. Datta

Theory and Practice of

ELECTRICALMACHINES DESIGN

ByDr. N.K. Datta



`


Releasing Shortly


SPECIALELECTRICAL

MACHINES

CONTENTS• Poly-phase AC Machines • Single Phase Induction Motors • StepperMotors and Switched Reluctance Motors • Permanent MagnetGenerators • Single Phase Commutator Motors • Model Papers• Examination Paper • Index.

BySimmi P. Burman

HIGH VOLTAGEENGINEERING

CONTENTS• Introduction • Breakdown in Gases • Generation of High D.C. Voltage• Measurement of High Direct Current Voltages • LightingPhenomenon–as Natural Cause for Overvoltage • Non-DestructiveTesting and High Voltage Testing • Model Test Papers • Previous YearExamination Paper • Index.

BySimmi P. Burman

Nikita Gupta

BySimmi P. Burman

Bipin Singh

POWERQUALITY



`

CONTENTS



`



`

• Introduction to Power Quality • Voltage Sag • Electrical Transients• Harmonics • Measurement and Solution of Power Quality Problems• Distributed Generation and Benchmarking of Power Quality• Harmonic Distortion Evaluations • References • Model Test Papers• Examination Papers • Index.



`By

Sanjay K. Sharma

CONTENTSEHV-AC, HVDCTRANSMISSION AND

DISTRIBUTIONENGINEERING

PartA: EHV-AC Transmission Engineering

Part B: HVDC Transmission Engineering

Part C: FlexibleAC Transmission Systems (FACTS)

Part D: Power System Operation

• Introduction to Extra high Voltage Transmission Systems • Overhead LineTransmission Voltages • EHV-AC Line Electrical Design Parameters • SAG andTension of EHV-AC Line Conductor • EHV-AC Line Overhead Conductor• Overhead Line Insulators and Line Accessories • Vibrations and Dampers• EHV Lines Transmission Structures • Power System Over Voltages andProtection • Corona Discharge • Extra High Voltage Testing .

• High Voltage Direct Current Transmisison • HVDC Converters and ConverterCharacteristics • Multi-Terminal DC System • Converter Faults and Protection

•Introduction to Flexible AC Transmission Systems (FACTS) • Reactive PowerCompensation ofAC Transmission Lines • Facts Controllers.

•Load Frequency Control • Voltage Control • Objective Type Questions withAnswers • Previous Examination Papers • Index.



SCADA and ENERGYMANAGEMENT

SYSTEM



`

CONTENTS

COMPUTER AIDEDDESIGN OF

ELECTRICALMACHINES



`

CONTENTS• Basic Considerations • Magnetic Circuit • Heating and Cooling ofElectrical Machines • Rotating Machines • Designing of 3-PhaseSynchronous Machines • Designing of Induction Motors • DC Motor• Transformer • Role of Computer Aided Design and Designing ofElectrical Machines • Computer Aided Design of Electrical Machine• Model Test Papers • Examination Paper • Index.

• An Introduction to SCADA • Supervisory and Control Functions• Man- Machine Communication • Data Basis • Energy ManagementCenter • SCADA and PLC • SCADA in Power System • SupervisoryPower Management • Programmable Logic Controllers • SCADASystem Components and Communication Technologies andApplications • Case Studies on SCADA• Examination Papers • Index.

By

V.K. MauryaRitu Raj JallanShasya Shukla



`

CONTENTS• Scope and Organisation of Electrical Maintenance Department• Testing, Installation and Commissioning of Electrical Machines andEquipments • Preventive Maintenance • Troubles and Troubleshootingof Electrical Machines • Troubleshooting of AC and DC Machines• Troubleshooting of Transformer • Troubleshooting of Circuit Breaker• Troubleshooting of Overhead Transmission Line and UndergroundCables • Troubleshooting of Storage Batteries • Earthing • Testing ofInstallation and Oil Purification • Electrical Accidents and Safety• Statutory Rules, Indian Electricity Rules 1956 and Act Related toEnvironmental Problems • Model Question Papers • Index.

INSTALLATION,MAINTENANCE AND

REPAIR OFELECTRICAL

MACHINES ANDEQUIPMENTS

ByMadhvi Gupta

By

Er. Tanuj K. Bisht

NON-CONVENTIONALENERGY SOURCES

ByAnand Tembulkar

S.P. Meher



`

• Energy Resources • Solar Energy • Wind Energy • Wave Energy • TidalEnergy • Geothermal Energy • Biomass Energy • Small Hydro PowerPlants • Fuel Cells • Ocean Thermal Energy Conversion (OTEC)• Model Question Paper • PreviousYear Question Paper • Index.

CONTENTS



NON-CONVENTIONALENERGY RESOURCES

CONTENTSPart-1: Current Energy Systems

Part-II: Renewable Energy Systems

Part-III: Direct Energy Conversion Systems

Part-IV: Future Energy Sources

Part-V:Allied Energy Systems

Part-VI: Projects and Papers

• Energy Utilization • Energy Resources • Energy Conversion Technologies

• Wind Energy • Small Hydro Power Plants • Biomass and Bioenergy• Geothermal Energy • Solar Thermal Energy • Ocean Thermal Energy • Waveand Tidal Wave Energy.

• Fuel Cells • Solar Cells • MHD Power Generation • Thermoelectric PowerGeneration • Thermionic Power Generation.

• Nuclear Fusion Energy • Hydrogen Energy • Exploring New Energy Sources

• Energy Resource Conservation • Energy Storage.•Appendix • Subject Index.

ByR.K. Singal

CONTROLSYSTEMS



`

ByS.P. Meher



`

• Introduction to Automatic Control • Block Diagram and TransferFunction • Time Response of System • Stability Analysis by RouthHurwitz Criteria • Root Locus Techniques • Bode Plot • Polar Plot andNyquist Stability Criteria • PreviousYears Question Papers • Index.

CONTENTS



ELECTRONICS ENGINEERING



`By

J.B. Gupta

A Course in

ELECTRICAL ANDELECTRONIC

MEASUREMENTS ANDINSTRUMENTATION



`

CONTENTS

BASICELECTRONICS



`

CONTENTSUnit-I: Electronic Components

Unit-II: Basic Electronic Circuits

Unit-III: Measuring Instrumentss.

Unit-IV: Digital Electronics

Unit-V: Integrated Circuits

• Passive Components • Basic Semiconductor and P-N Junction Theory• Junction Diodes • Special Purpose Diodes • Bipolar Junction Transistors(BJTs).

• Rectifiers • Electrical Wave Filters • BJTAmplifiers.

• Cathode Ray Oscilloscope • Electronic Meter

• Number Systems and Codes • Logic Gates and Boolean Algebra• Logic Circuits.

• Integrated Circuits • Operational Amplifiers • The 555 IC Timer• Experiments • Objective Type Questions • Model Test Papers• PreviousYear’s Examination Papers •Appendix • Index.

• Measurements and Measurement Systems • Characteristics of Instruments andMeasurement Systems • Errors in Measurement • Units and Dimensions • Standards ofMeasurement • Electrical Circuit Components (Resistors, Inductors, Capacitors) and theirResidues • Instruments and Accessories • Galvanometers • Analog Ammeters andVoltmeters • Extension of Instrument Range • Measurement of Power and Wattmeters• Measurement of Energy and Energy Meters • Miscellaneous Indicating Instruments• Measurement of Resistance • Potentiometers • Measurement of Inductance andCapacitance • Localization of Cable Faults • Magnetic Measurements • High VoltageMeasurements • Optoelectronic Measurements • Electronic Instruments • HighFrequency Measurements • Cathode Ray Oscilloscope • Special Oscilloscopes andProbes • Signal Generators • Signal Analyzers • Instrumentation Amplifiers • NonlinearCircuits • Signal Conditioning • Electrical Wave Filters • Number Systems and Codes• Logic Gates, Boolean Algebra and Logic Families • Digital Measurement andInstruments • Display Devices • Electronic Recording Devices • Transducers• Measurement of Non-Electrical Quantities • Data Acquisition Systems • Telemetry• Microprocessor Based Measurements • Objective Type Questions • True/False TypeQuestions • Fill in the Blanks Type Questions •Appendices • Index.

By

J.B. Gupta

CONTENTSBASICELECTRICAL AND

ELECTRONICSENGINEERING

By

J.B. Gupta

Part-I: Electrical Engineering

Part-II: Electronics Engineering

• Direct Current (DC) Circuits • Alternating (Sinusoidal) Voltage andCurrent • Single Phase AC Circuits • Phasor Algebra and AC Circuits •Resonance in R-L-C Circuits • Three Phase Systems • MagneticCircuits • Single Phase Transformer • DC Machines (Generators andMotors) • Three Phase Induction Motors • Synchronous Machines(Generators and Motors)

• Transducers • P-N Junction Diode • Bipolar Junction Transistor (BJT)• Field-Effect Transistors (FETs) • DC Power Supplies • NumberSystems • Logic Circuits • Experiments • Examination Papers • Index.

ELECTRONICDEVICES AND

CIRCUITS

CONTENTS• Introductory Concepts • Electron Dynamics • Electron Emission• Semiconductor Physics • Junction Diodes • Zeners and otherTwo Terminal Devices• Rectifiers • Bipolar Junction Transistors (BJTs) • Hybrid Parameters• Transistor Biasing and Stabilization • Single Stage Transistor Amplifiers • Fieldeffect Transistors • Amplifier Frequency Response • Multistage Amplifiers• Large Signals or Power Amplifiers-I Single Ended • Large Signals or PowerAmplifiers-II Push- Pull • Feedback Amplifiers • Tuned Amplifiers • DifferentialAmplifiers • Sinusoidal Oscillators • Modulation and Demodulation• Optoelectronic Devices • Power Semiconductor Devices • Pulse Signals• Linear Waveshaping • Nonlinear Waveshaping • Switching Circuits (Multivibrators)• Integrated Circuits • Operational Amplifiers • General Applications of OP-AMPs• IC Waveform Generators • Nonlinear Circuits • The 555 IC Timer • Active Filters• Phase-Locked Loops (PLL) • Regulated and Switching Power Supplies • NumberSystems and Codes • Logic Gates and BooleanAlgebra • Logic Circuits • Digital LogicFamilies • Digital-To-Analog and Analog-To- Digital Converters • Microcomputersand Microprocessors • Electronic (Analog as Well as Digital) Instruments • CathodeRay Oscilloscope • Transducers • Objective Type Questions •Appendices • Index.

ByJ.B. Gupta



`



ANALOGDEVICES AND

CIRCUITS

CONTENTSUnit-I : Semiconductor Diodes

Unit-II : Transistor Characteristics and Biasing

Unit III : Large SignalAmplifiers

Unit-IV : FeedbackAmplifiers and Oscillators

Unit-V : Low and High Frequency Transistor Model

• Junction Diodes • Special Purpose Diode.

• Bipolar Junction Transistors (BJTs) • Transistor Biasing andStabilization • Field-effect Transistors (FETs) and UJT.

• Large SignalAmplifiers.

• FeedbackAmplifiers • Sinusoidal Oscillators.

• Low and High Frequency Transistor Model •Appendices • Model TestPapers • Index.

ByJ.B. Gupta

PULSE ANDDIGITAL

SWITCHINGCIRCUITS

CONTENTS• Review of Electronic Circuit Theory • Pulse Signals • LinearWaveshaping • Wideband Amplifiers • Switching Characteristics ofDevices • Non-linear Waveshaping • Multivibrators • NegativeResistance Devices • Operational Amplifiers (Op-Amps) • Sinusoidaland Non-sinusoidal Waveform Generators • The 555 IC Timer • LogicGates • Examination Papers • Index.

ByJ.B. Gupta

ByJ.B. Gupta

LINEARINTEGRATED

CIRCUITS



`

CONTENTS



`



`

Unit-I: Differential and CascodeAmplifiers

Unit-II: Introduction to OperationalAmplifiers

Unit-III:Application of Op-Amp

Unit-IV: Specialised ICApplications

• Differential and CascodeAmplifiers.

• Introduction to Operational Amplifiers • Feedback Configurations(Negative Feedback in Op-Amps).

• General Applications of Op-Amps • Active Filters • Oscillators(Sinusoidal as well as Non-sinusoidal) • Comparators and Converters.

• The 555 IC Timer • Phase Locked Loops (PLL) • Voltage Regulators•Appendices • Model Test Papers • Index.



`By

J.B. Gupta

CONTENTSPULSEWAVESHAPING

AND SWITCHING

Review in Brief: Electronic Circuit Theory, Pulse Signals, Op-Ampsand Flip- Flops • Electronic Circuit Theory • Pulse Signals • OperationalAmplifiers (Op-Amps) • Flip-Flops.

• Introduction to Basic Elements and Waveforms.

• Bistable Multivibrators.

• Monostable andAstable Multivibrators.

• Switching Characteristics of Devices.• Linear Waveshaping.

• Nonlinear Waveshaping •Appendices • Model Test Papers • Index.

Unit-I: Introduction to Basic Elements and Waveforms:

Unit-II: Bistable Multivibrators:

Unit-III: Monostable andAstable Multivibrators:

Unit-IV: Switching Characteristics of Devices:

Unit-V: LinearWaveshaping:Unit-VI: NonlinearWaveshaping:



`

By

J.B. Gupta

ANALOGELECTRONICS

CONTENTS

Elements of

ANALOGELECTRONICS

CONTENTSUnit-I: Bias Stabilization & Small SignalAmplifiers

Unit-II: MultistageAmplifiers & FeedbackAmplifiers

Unit-III: Field-Effect Transistors

Unit-IV: PowerAmplifiers

Unit-IVA: Op-Amp and itsApplications

• Review of Diode and BJT • Bias Stabilization • Small SignalAmplifiers.

• MultistageAmplifiers • FeedbackAmplifiers.

• Field-Effect Transistors • Thyristors.

• PowerAmplifiers • TunedAmplifiers.

• Op-Amp and its Linear Applications • Waveform Generators(Oscillators and Multivibrators) • Model Test Papers • Index.

CONTENTSELECTRONICINSTRUMENTS &MEASUREMENTS

By

J.B. Gupta

Unit-I: Introduction to Metering

Unit-II: Basic Instruments

Unit-III: Cathode Ray Oscilloscope

Unit-IV: Electronic Instruments

• Performance Characteristics and Errors in Measurement • AnalogAmmeters and Voltmeters • Display Devices, Printers and Standards.

• Basic Instruments • Digital Metering.

• Cathode Ray Oscilloscope • Special Oscilloscopes and Probes.

• Signal Generators and Wave Analyzers • Transducers and Recorders• Data Acquisition Systems (DAS)• Model Test Papers • Index.

ELECTRONICMEASUREMENT

ANDINSTRUMENTATION

CONTENTSSectionA: Oscilloscope

Section B: Electronic Instruments

Section C: Generation and Analysis of Waveforms and Frequencyand Time Measurement

Section D: Transducers and Signal Conditioning

• Cathode Ray Oscilloscope.

• Electronic Instruments.

• Waveform Generators • Operational Amplifiers and Applications• WaveformAnalyzers • Digital Circuits • Digital Meters.

• Transducers • Measurement of Non-Electrical Quantities• Introduction to Signal Conditioning • Display Devices• Miscellaneous Topics • Model Test Papers • Previous YearExamination Papers • Index.

ByJ.B. Gupta



`



`

By

J.B. Gupta



`

Unit-I: Differential Amplifiers & Operational Amplifiers (Op-Amps)

Unit-II: Linear and Non-LinearWaveshaping

Unit-III: Waveform Generators andActive Filters

Unit-IV: SpecilizedApplications

• DifferentialAmplifiers • OperationalAmplifiers (Op-Amps).

• General Applications of Op-Amps • Nonlinear Waveshaping• Nonlinear Circuits • Waveform Generators (Sinusoidal Oscillators).

• Waveform Generators (Nonsinusoidal) •Active RC Filters.

• The 555 IC Timer • Operational Transconductance Amplifier (OTA)• Specilized ICApplications • Index.




ANALOGINTEGRATED

CIRCUITS

CONTENTSUnit-I: IC Op-AmpApplications

Unit-II: Waveform Generators

Unit-III:Active Filters

Unit-IV: Non-Linear Circuits

Unit-V: Voltage Regulators

• DifferentialAmplifiers • OperationalAmplifiers and Their Parameters• Op-Amps with Negative Feedback • Linear Applications of Op-Amps

• Waveform Generators • Digitally Controlled Frequency Synthesizers

•Active Filters.• Non-Linear Circuits • Operational

TransconductorAmplifier (OTA).

• Voltage Regulators • Appendices • Technical University QuestionPapers • Index.

ByJ.B. Gupta

Fundamentals of

ELECTRONICDEVICES

CONTENTSUnit-I : Crystal Properties and Charge Carriers in Semiconductors

Unit-II : Excess Carriers in Semiconductors

Unit-III : Junction Properties

Unit-IV : Transistors

Unit-V : Some Special Devices

• Semiconductor Materials and Crystal Properties • Energy Bands andCharge Carriers in Semiconductors.

• Excess Carriers in Semiconductors.

• Junction Properties • Junction Properties (Continued).

• Bipolar Junction Transistors (BJTs) • Field-Effect Transistors.

• Photonic Devices • Negative Conductance Microwave Devices• Power Devices • Appendices • Model Test Papers • UniversityExamination Paper • Index.By

J.B. Gupta

ByJ.B. Gupta

ELECTRONICINSTRUMENTATION& MEASUREMENTS

Size: 20 × 30/8Pages: 325 Approx.ISBN: 81-89757-30-X


`

CONTENTS



`



`

Unit-I : Units, Dimensions and Standards, Measurement Errorsand PMMC Instruments

Unit-II :Analog Electronic Meters and Digital Meters

Unit-III : Resistance Measurements and Inductance andCapacitance Measurements

Unit-IV : Cathode Ray Oscilloscopes

Unit-V : Instrument Calibration and Recorders

• Units, Dimensions and Standards • Measurement Errors • PMMCInstruments.

•Analog Electronic Meters • Digital Meters.

• Resistance Measurements • Inductance and CapacitanceMeasurements.

• Cathode Ray Oscilloscopes• Special Oscilloscopes.

• InstrumentCalibration and Recorders • Model Test Papers • Examination QuestionPapers • Index.

CONTENTSELECTRICAL ANDELECTRONICSENGINEERING

MATERIALS

Unit-I: Crystal Structure of Materials

Unit-II: Conductivity of Metals

Unit-III: Mechanism of Conducton in Semiconductor Materials

Unit IV: Magnetic Properties of Materials and ElectricalEngineering Materials

Unit-V: Dielectric Properties of Materials

• Crystal Structure of Materials,

• Conductivity of Metals.

• Semiconductors • Bipolar Junction and Field Effect Transistors.

• Magnetic Properties of Materials.

• Dielectric Properties of Materials • Model Test Papers • ExaminationPapers • Index.

Size: 20 × 30/8Pages: 375 Approx.ISBN: 81-89757-13-x


`

By

J.B. Gupta


Fundamentals of

(UTU)


CIRCUITS



`

CONTENTS

ANALOGELECTRONIC

CIRCUITS

CONTENTSSection A: Single and Multistage Amplifiers and FeedbackAmplifiers

Section B: Oscillators

Section C: PowerAmplifiers and OperationalAmplifiers

Section D: Linear and Non-Linear Applications of OperationalAmplifiers

• Single Stage Transistor Amplifiers • MultistageAmplifiers • FeedbackAmplifiers.

• Sinusoidal Oscillators.

• PowerAmplifiers • OperationalAmplifiers (Op-Amps).

• LinearApplications of OperationalAmplifiers • NonlinearApplications of Operational Amplifiers • IC Waveform Generators• Digital-To-Analog and Analog-To-Digital Converters • Appendices• Model Test Papers • PreviousYear Examination Papers • Index.

Unit-I: Crystal Properties and Charge Carriers in Semicontuctors& Magnetic Materials

Unit-II: TransistorAmplifier Frequency Response

Unit-III: Feedback and Oscillators

Unit-IV: Multistage and TunedAmplifiers

Unit-V: • Multivibrators

• Semiconductor Materials • Crystal Structure of Materials • MagneticMaterials.

• TransistorAmplifiers •Amplifier Frequency Response.

• FeedbackAmplifier • Oscillators.

• MultistageAmplifiers • TunedAmplifiers• Index.

CONTENTSELECTRONICMEASUREMENTS

ANDINSTRUMENTATION

By

J.B. Gupta

Unit-I: Electronic Instruments

Unit-II: Instruments for Generation andAnalysis of Waveforms

Unit-III: Instrument Transformers

Unit-IV: Transducers

Unit-V: DataAcquisition System

Unit-VI: Display Devices

Unit-VII: Telemetry

• Electronic Instruments and High Frequency Measurements • Cathode RayOscilloscopes • Digital Measurement and Measuring Instruments.

• Instruments for Generation andAnalysis of Waveforms.

• Instrument Transformers.

• Transducers • Measurement of Non-Electrical Quantities

• Data Acquisition System • Instrumentation Interface Bus : IEEE-488• Recorders

• Display Devices

• Telemetry • PreviousYears Solved Examination Papers • Index.

Fundamentals of

ANALOGELECTRONICS

CONTENTSSection-A: Semiconductor Diode

Section-B: MOSFETs

Section-C: BJTs

Section-D: Operational Amplifier Feedback and DifferentialAmplifier•

• Semiconductor Diode • Diode Circuits

• MOSFETs (Metal-Oxide Semiconductor Field-Effect Transistors)• MOSFETs (Continued)

• BJTs (Bipolar Junction Transistors) • BJTs (Continued)

Operational Amplifier • Feedback • Differential Amplifier • ModelTest Papers • Examination Papers • Index.



`By

J.B. Gupta



`

By

J.B. Gupta

ByJ.B. Gupta



`




A Textbook of

BASICELECTRICAL AND


CONTENTSIntroductory Concepts

• Electrical Circuit Analysis • Alternating (Sinusoidal) Voltage and Current• Single Phase AC Circuits • Phasor Algebra and AC Circuits • Three Phase ACCircuits.

• Magnetic Circuits • Transformers.

• DC Machines (Generators and Motors) • Three Phase Rotating Machines(Synchronous and Induction Machines).

• Number Systems • Logic Gates and BooleanAlgebra • Logic Circuits

• Semiconductors and P-N Junction Theory • Junction Diodes • Bipolar JunctionTransistors (BJTs) • Laboratory Practicals • Model Test Papers • Examinationpaper • Index.

Unit-I: Electrical CircuitAnalysis

Unit-II: Transformers

Unit III: Rotating Electric Machines

Unit-IV: Digital Electronics

Unit-V: Electronic Components and Circuits

ByJ.B. Gupta

BASICELECTRONICS

CONTENTSSectionA: Semiconductor Physics andAmplifiers

Section B: Oscillators, Operational Amplifiers and Power Supplies

Section C: Digital Electronics and Electronic Instruments

Section D: Displays

• Semiconductor Physics • Junction Diodes • Bipolar JunctionTransistors (BJTs) • TransistorAmplifiers.

• Oscillators • OperationalAmplifiers (Op-Amps) • Power Supplies.

• Digital Electronics • Electronic Instruments.

• Displays • Experiments •Appendices • Examination Papers • Index.

ByJ.B. Gupta

ByJ.B. Gupta

A Textbook of

ANALOGELECTRONICS



`

CONTENTS



`



`

Preliminaries

Unit-I : FeedbackAmplifiers

Unit-II : Oscillators and Multivibrators

Unit-III : High FrequencyAmplifiers

Unit IV : TunedAmplifiers

Unit-V : PowerAmplifiers

• Small Signal Low Frequency TransistorAmplifiers.

• FeedbackAmplifiers.

• Sinusoidal Oscillators • Multivibrators.

• High FrequencyAmplifiers .

• TunedAmplifiers.

• PowerAmplifiers • Model Test Papers • Index.



`

CONTENTSELECTRICAL ANDELECTRONICSENGINEERING

• Introductory Concepts

• DC Networks

• AC Fundamentals • Single Phase Series Circuits • Complex Notations andCircuit Analysis • Single Phase Parallel and Series-Parallel Circuits• Resonance in RL-C Circuits • Three-PhaseAC Circuits.

• Electromagnetic Induction • Transformer • DC Machines.

• Transistors (Bipolar Junction Transistors) • Thyristors

• Modulation, Demodulation and Television • Communication Channels• Examination Papers (Solved) • Index

Unit-I: DC Networks

Unit-II:AC Circuits

Unit-III:Transformers and Electrical DC Machines

Unit-IV: Transistors and Thyristor

Unit-V: Communication Systems

By

J.B. Gupta




`

By

J.B. Gupta

BASIC ELECTRICALAND




`

CONTENTSUnit I : Basic Concept of Electrical Engineering

Unit II :Alternating Quantities

Unit III : Rotating Electrical Machines

Unit IV : Basic Electronics

Unit V : Communication Systems & Instrumentation and Control

• Introductory Concepts • Resistive Networks.

• AC Fundamentals • Single Phase Series Circuits • Complex Notations andCircuit Analysis • Single Phase Parallel and Series-Parallel Circuits • Three-phaseAC System.

• DC Machines (Generators and Motors) • Three-phase Induction Motors• Synchronous Machines (Generators and Motors).

• Semiconductors and P-N Junction Theory • Semiconductor Diodes • Rectifiers• Bipolar Junction Transistor (BJT) • Field-effect Transistors (FETs) • DigitalElectronics.

• Communication Systems • Instrumentation and Control (Transducers and ICs)• Question Papers • Index.

CONTENTSElements of

(GGSIPU)

ANALOGELECTRONICS

By

J.B. Gupta

Unit-I: Semiconductor Diodes and Rectifiers

Unit-II: Bipolar Junction Transistor (BJT) and Bias Stabilization

Unit-III: Small SignalAmplifiers and Field Effect Transistors

Unit-IV: OperationalAmplifiers

• Basic Semiconductor and P-N Junction Theory • SemiconductorDiodes • Zener and Other Two-Terminal Devices • DiodeApplications.

• Bipolar Junction Transistor (BJT) • Bias Stabilization.

• Small SignalAmplifiers • Field Effect Transistors.

• Operational Amplifiers • Linear Applications of Op-Amps • Non-Linear Applications of Op-Amps • Op-Amp Filters • Appendices• Examination Papers • Index.

An IntegratedCourse in


CONTENTSUnit-I: Preliminaries

Unit-II: Semiconductor Physics and Diodes

Unit-III: Transistor

Unit-IV:Amplifiers and Oscillators

• Introductory Concepts • Circuit Analysis • Electron Dynamics• Electron Emission • Electron Tubes

• Semiconductor Physics • Junction Diodes • Zeners and other Two-Terminal Devices • Rectifiers.

s• Bipolar Junction • Transistors (BJTs) • Field Effect Transistors • HybridParameters • Transistor Biasing and Stabilization

• Single Stage Transistor Amplifiers • Amplifier Frequency Response• High-Frequency Transistor • Multistage Amplifiers • Large Signal orPower Amplifiers • Feedback in Amplifiers • Tuned Amplifiers• DifferentialAmplifiers • Sinusoidal Oscillators.

ByJ.B. Gupta



`

Unit-V: Communication Systems

Unit-VI: Power Electronic

Unit-VII:Analog Integrated Circuits

Unit-VIII: Pulse and Digital Circuits

Unit-IX: Digital Electronics

Unit-X: Electronic Measurements and Instrumentation

• Modulation and Demodulation • Digital Communication• Communication Channels • Optoelectronic Devices.

s• Power Semiconductor Devices • Power Converters.

• Integrated Circuits • Operational Amplifiers and Their Parameters• Op-Amps with Negative Feedback • Frequency Response of an Op-Amp • General Linear Applications of Op-Amps • Active Filters• Phase-Locked Loops (PLL) • Regulated and Switching PowerSupplies.

• Pulse Signals • Linear Wave Shaping • Nonlinear Wave Shaping• Switching Circuits (Multivibrators) • The 555 IC Timer • WaveformGenerators (Sinusoidal as well as Non- Sinusoidal) • Nonlinear Circuits.

• Number Systems and Codes • Logic Gates and Boolean Algebra• Logic Circuits • Digital Logic Families • Digital-to-Analog andAnalog-to-Digital Converters • Microcomputers and Microprocessors.

• Electronic (Analog as well as Digital) Instruments • Cathode RayOscilloscope • Transducers •Appendices • Index.




A Textbook of


CIRCUITS

CONTENTSSection-A: Conducting Materials

Section-B: Semiconductors, Construction and Characteristics ofDevices

Section-C: Transistors

Section-D: Some Special Devices

• Conducting Materials.

• Semiconductors • Construction and Characteristics of Devices.

• Bipolar Junction Transistors (BJTs) • Field-Effect Transistors.

• Photonic Devices • Negative Conductance Microwave Devices• Power Devices •Appendices • Model Test Papers • Examination Paper• Index.

ByJ.B. Gupta

Elements of


CIRCUITS

CONTENTS

Unit-I: Semiconductor Diodes andApplications

Unit-II: Bipolar Junction Transistors (BJTs)

Unit III: Small SignalAmplifiers at Low Frequency

Unit-IV: FeedbackAmplifiers

Unit-V: Oscillators

• Energy Bands and Charge Carriers in Semiconductors • JunctionDiodes and other Two-Terminal Devices • Diode Circuits

• Bipolar Junction Transistors (BJTs) • Transistors Biasing andStabilization • h-Parameter Equivalent Circuits and TransistorAmplifierAnalysis.

• Field-Effect Transistors (FETs) • Small Signal Low-FrequencyTransistorAmplifiers and Frequency Response • MultistageAmplifiers

• FeedbackAmplifiers

• Sinusoidal Oscillators • Multivibrators • Model Test Papers • Index.By

J.B. Gupta

ByJ.B. Gupta

ANALOGELECTRONICS-I(Basic Analog Electronics)

(GGSIP)



`

CONTENTS



`



`

Unit I: Semiconductor Diodes and Rectifiers

Unit II: Bipolar Junction Transistor and Bias Stabilization

Unit III: Multistage Amplifiers and Feedback Amplifiers

Unit IV: Field-Effect Transistors, UJT and SCR

• Basic Semiconductor and P-N Junction Theory • SemiconductorDiodes • Zener and Other Two-Terminal Devices • Rectifiers.

• Bipolar Junction Transistor (BJT) • BIAS Stabilization • Small SignalAmplifiers.

• MultistageAmplifiers • FeedbackAmplifiers.

• Field Effect Transistors (FETs), UJT and SCR • Examination Papers• Index.



`By

J.B. Gupta

CONTENTSBASIC ELECTRICAL& ELECTRONICS

ENGINEERING

(HPTU)

Section-A

Section-B

Section-C

Section-D

• DC Circuits • AC Fundamentals • Complex Numbers • ElectricalInstruments • Domestic Electric Wiring.

• Single-Phase Series Circuits • Single-Phase Parallel and SeriesParallel Circuits • Three-Phase AC Circuits • Transformers • DCMachines (Generators and Motors) • AC Machines (Synchronous andInduction Machines).

• Semiconductor and P-N Junction Theory • Semiconductor Diodes• Rectifiers • Bipolar Junction Transistor (BJT)

• Field-Effect Transistors (FETs) • Integrated Circuits (ICs) • ElectronicInstruments •Appendix • Model Test Papers • Index.


ANALOGELECTRONICS-II

(GGSIP)



`

CONTENTSUnit-I : Building Blocks ofAnalog ICs

Unit-II : Waveform Generation

Unit-III : PowerAmplifiers and Waveshaping

Unit-IV : Active RC Filters and Applications of IC AnalogMultiplier

• Differential Amplifiers • Operational Amplifiers (Op-Amps) • LinearApplications of Op-Amps • Operational Transconductance Amplifier(OTA)• Transistor Oscillators (Sinusoidal) • IC Waveform Generators.

• Power Amplifiers • Tuned Amplifiers • Linear Waveshaping • Non-Linear Waveshaping • Non-Linear Circuits.

• Active Filters • Phase-Locked Loops • Voltage Regulaters • FunctionGenerators • Examination Papers • Index.

WIRELESSSENSOR

NETWORKS

A Textbook of


Unit-I: Semiconductor Diodes andApplications

Unit-II: Transistors (BJT and FET)

Unit-III: OperationalAmplifiers (Op-Amps)

Unit-IV: Digital Instruments and Oscilloscope

Unit-V: Fundamentals of Communication Engineering

• Semiconductor and P-N Junction Theory • Semiconductor Diodes• DiodeApplications • Special Purpose Two-Terminal Devices.

• Bipolar Junction Transistor (BJT) • DC Biasing BJTs • BJTAmplifiers• Field-Effect Transistor (FET).

• DifferentialAmplifier Circuits • OperationalAmplifiers (Op-Amps).

• Digital Instruments and Oscilloscope.

• Fundamentals of Communication Engineering • Appendix • ModelTest Papers • Index.



`

A Textbook of

ELECTRONICDEVICES

Unit-I: Evaluation of Electronics

Unit-II: Theory of P-N Junction Diode

Unit-III: Bipolar Junction Transistor (BJT)

Unit-IV: Application of BJT and Fundamentals of DigitalElectronics

• Evaluation of Electronics.

• Theory of P-N Junction Diode • Special Diodes • Applications ofDiodes.

• Bipolar Junction Transistor (BJT).

• BJT Applications and FET’s • Number Systems • Logic Gates andBoolean Algebra • Objective Type Questions • Model Test Papers• Index.



`

ByJ.B. Gupta

ByJ.B. Gupta

By




`

CONTENTS

CONTENTS


BySunil Gupta

Dr. Harsh K. Verma

CONTENTS• Introduction to Wireless Sensor Networks • Architecture andHardware • Optimization Goal and Merit • Topology Control • PhysicalLayer and MAC Protocols • Routing Protocols • WSN Platform andTools • WSN Security and Prerequisite • Infrastructure Establishment•Applications and Future Directions • Model Question Papers • Index.



A Textbook of


CONTENTSUnit One:

Unit Two:

Unit Three:

Unit Four:Unit Five:

• Semiconductor Materials • Semiconductor Diods • DiodeApplications • Special Purpose Two Terminal Devices.

• Bipolar Junction Transistor • DC Biasing BJTs • Single StageTransistorAmplifier • Field Effect Transistor.

• OperationalAmplifier.• Electronic Instruments.

• Fundamentals of Communication Engineering: Introduction• Fundamentals of Communication Engineering: AmplitudeModulation • Fundamentals of Communication Engineering: AngleModulation • Model Question Papers • Index.

ByDr. Sanjay Sharma

ANALOG ANDDIGITAL

ELECTRONICS

CONTENTSUnit-I

Unit-II

Unit-III

Unit-IV

s.Unit-V

• Special Diodes.

• Frequency Response • Feedback.

• Oscillators.

• Combinational Logic Circuits • Sequential Logic Circuits: Flip-Flop • Shift Registers • Counter

• Op-AmpsApplications •A/D and D/AConverters • VoltageRegulators • Memories.• PreviousYears Question Papers • Index.By

Dr. Sanjay Sharma

ByDr. Sanjay Sharma

SWITCHINGTHEORY & LOGIC

DESIGN



`

CONTENTS



`



`

Unit-1

Unit-2

Unit-3

.Unit-4

• Digital Systems and Binary Numbers • BooleanAlgebra • Gate-LevelMinimization.

• Combinational Logic.

• Synchronous Sequential Logic • Asynchronous Sequential Logic• Hazards

• Registers and Counters • Memory and Programmable Logic • ModelQuestion Paper • Index.



`

By

Dr. Sanjay Sharma

CONTENTSWIRELESSCOMMUNICATION

SYSTEM

• Introduction • Elements of Cellular Radio Systems Design • DigitalCommunication through Fading Multipath Channels • Multiple AccessTechniques for Wireless Communications • Wireless Networks• Wireless Systems and Standards • Future Trends • Model QuestionPapers • Index.


INTEGRATEDCIRCUITS



`

CONTENTSUnit I

Unit II

Unit III•Unit IV

Unit V

•Analog Integrated Circuit Design:An Overview • The 741 IC Op-Amp.

• LinearApplications of IC Op-Amps • Filters • Sinusoidal Oscillators.

Digital Integrated Circuits Design.

• Non-LinearApplications of IC Op-Amps •Analog Multipliers.

• D/A and A/D Converters • Integrated Circuit Timer • Phase LockedLoops (PLL) • PreviousYear Question Paper • Index.

DIGITALSIGNAL

PROCESSING

(RGTU)

ByDr. Sanjay Sharma

SIGNALS ANDSYSTEMS

(With Matlab Programs)

Two Colours Edition

• Signals • The Laplace Transform • The Z-Transform • ContinuousTime Fourier Transform (CTFT) • Discrete-Time Fourier Transform(DTFT) • Systems • Correlation, ESD and PSD • Time and FrequencyDomain Analysis of Systems • Sampling • Probability, Random Signalsand Random Process • Steady Space Analysis • Noise • Matched Filter(Optimum Filter) •Appendices • Objective Type Questions • Model TestPapers • Index.



`

SIGNALS ANDSYSTEMS

(For UPTU)

Unit-I:Unit-II:Unit-III:

Unit-IV:Unit-V:

• Signals.• The Laplace Transform (LT) • The Z-Transform.

• Continuous-Time Fourier Transform (CTFT) • Discrete-Time.Fourier Transform (DTFT).

• Systems • Correlation, ESD and PSD.• Time and Frequency Domain Analysis of Systems • Previous

Year Question Papers • Index.

Unit-I :

Unit-II :

Unit-III :

Unit-IV :

Unit-V :

• Introduction to Digital Signal Processing (DSP) • Discrete-TimeSignals • Discrete-Time Systems.

• The z-Transform.

• Frequency Analysis of Discrete-Time Signals: Discrete Fourier Series(DFS) • FrequencyAnalysis of Discrete-Time Signals: Discrete FourierTransforms

• Efficient Computation of DFT: FFTAlgorithms.

• Digital Filters Design Techniques: IIR Digital Filters • Digital FiltersDesign Techniques: FIR Digital Filters • Model Question Paper • Index.



`

ByDr. Sanjay Sharma



`By

Dr. Sanjay Sharma

CONTENTS

CONTENTS

CONTENTS

ByDr. Sanjay Sharma




Principles of

COMMUNICATION

CONTENTSUnit-I:

Unit-II:

Unit-III:

Unit-IV:

Unit-V:

• Introduction •Amplitude Modulation • Radio Transmitter Receiver.

•Angle Modulation.

• Sampling Theory and Pulse Modulation • Digital Transmission ofAnalog Signals: Pulse Code Modulation (PCM) • Issues in DigitalTransmission: Multiplexing and Line Coding.

• Waveform Coding Techniques and Noise.

• Noise Analysis in Communication Systems • Phase-Locked Loops(PLLs): Analog and Digital • Model Question Papers • Previous YearQuestion Paper • Index.

ByDr. Sanjay Sharma

ELECTRONICCIRCUITS

CONTENTSUnit-I

Unit-II

Unit-III

Unit-IV

Unit-V

• OperationalAmplifiers.

• MOSFETs • MOSFET asAmplifier and Switch.

• Bipolar Junction Transistor (BJT) • TransistorAmplifiers and Models.

• DifferentialAmplifier.

• Feedback • Oscillators • PreviousYear Question Paper • Index.

ByDr. Sanjay Sharma

ByDr. Sanjay Sharma

ELECTRONICCIRCUITS

(MP)



`

CONTENTS



`


Price: 295/-Rprint: 2014

`

Unit-One

Unit-Two

Unit-Three

Unit-Four

Unit-Five

• Amplifier Basics • Transistor at Low Frequency • Transistor at HighFrequency

• FeedbackAmplifier • Oscillators.

• PowerAmplifier • TunedAmplifier.

• CascadeAmplifiers • DifferentialAmplifier.

• Operational Amplifier • Applications of Op-Amp • Model QuestionPaper • Index.

CONTENTSOP-AMPsAND LINEARINTEGRATED

CIRCUITS

• Introduction to Differential Amplifier and OP-AMP • OperationalAmplifier Fundamentals • OP-AMPs with Negative Feedback • BasicApplications of Operational-Amplifiers • Waveform Generators• Digitally Controlled Frequency Synthesizers • Active Filters • NonLinear Applications of OPAMPs • Analog Multiplier Circuits• Operational Transconductance Amplifier (OTA) • Voltage Regulators• D/A and A/D Converters • Power Amplifiers ICs • Appendices• Objective Type Questions • Model Question Papers • Index.



`

By

Dr. Sanjay Sharma


DIGITAL IMAGEPROCESSING



`

• Introduction and Fundamentals • Image Enhancement in SpatialDomain • Image Enhancement in Frequency Domain • ImageRestoration • Morphological Image Processing • Registration • ImageSegmentation • Colour Image Processing • Representation andDescription • Object Recognition • Image Compression • ImageProcessing Softwares • Model Test Papers • Index.

ANALOGINTEGRATED

ELECTRONICS

ByDr. Sanjay Sharma

Fundamentals of

DIGITAL IMAGEPROCESSING

Unit-One

Unit-Two

Unit-Three

Unit-Four

• Introduction and Digital Image Fundamentals • Image Enhancementin the Spatial Domain.

• Image Enhancement in the Frequency Domain • Image Restoration.

• Image Compression • Image Segmentation.

• Representation and Description • Morphological Image Processing• Object Recognition • Model Question Paper • Index.


Price: 165/-Fourth Edition : 2013

`

ELECTRONICDEVICES

(For MP)

Unit-One

Unit-Two

Unit-Three

Unit-Four

Unit-Five

• Semiconductor Materials and Properties • Semiconductor Diodes.

• DiodeApplications.

• Diode Family: Breakdown Diodes • Diodes Family: Special Diodes.

• Bipolar Junction Transistor (BJT).

• FET Construction • Model Question Papers • Index.

Unit-I :

Unit-II :

Unit-III :

Unit-IV :

Unit-V :

• Introduction • Frequency Response and Stability of Op-amp.

• Op-Amps with Negative Feedback • Basic Applications ofOperationalAmplifiers.

•Active Filters • Converters.

• Non-LinearApplications of Op-Amps • Voltage Regulators.

• Non-Linear Amplifiers and Analog Multiplier Circuits • OperationalTransconductance Amplifier (OTA) • Phase-Locked Loops (PLLs)• Noise in Integrated Circuits • Model Question Papers • Index.



`

ByDr. Sanjay Sharma

ByDr. Sanjay Sharma

CONTENTS

CONTENTS

CONTENTS



`By

Dr. Sanjay Sharma


CONTENTS



DIGITALELECTRONICS(Digital Logic Design)

CONTENTS

Unit-I :

Unit-II :

Unit-III :

Unit-IV :

Unit-V :

• Digital System and Binary Numbers • Gate Level Minimization.

• Combinational Logic.

• Synchronous Sequential Logic: Flip-Flops • Synchronous SequentialLogic: Shift Registers • Counters and Analysis and Synthesis ofSynchronous Sequential Circuits.

• Introduction to Memories • Programmable Logic Devices • Design atthe Register Transfer Level:ASMs

• Asynchronous Sequential Logic • Introduction to Hazards • PreviousYear Question Papers • Index.

ByDr. Sanjay Sharma

DIGITALCOMMUNICATIONS

(MP)

CONTENTS

Unit-One

Unit-Two

Unit-Three

Unit-Four

Unit-Five

• Introduction • Random Variables.

• Digital Conversion of Analog Signals • Digital Transmission ofAnalog Signals.

• Digital Transmission Techniques.

• Other Digital Techniques • Optimum Reception of Digital Signals.

• Information Theory • Channel Coding.• Model Question Papers• Index

ByDr. Sanjay Sharma

ByDr. Sanjay Sharma


CIRCUITS



`

CONTENTS



`



`

Unit-I

Unit-II

Unit-III

Unit-IV

Unit-V

• Semiconductor Devices • Transistor as anAmplifier.

• Feedback • Sinusoidal Oscillators • PowerAmplifiers.

• Waveshaping Circuits: Multivibrators, Clippers and Clampers• DifferentialAmplifiers • MultistageAmplifiers.

• Operational Amplifier Characteristics • Basic Applications of OpAmps.

• Voltage Regulators • Model Question Papers • Index.



`By

Dr. Sanjay Sharma

CONTENTSCOMMUNICATIONSYSTEMS

(Analog and Digital)

• Introduction • Signal Analysis and Transmission • AmplitudeModulation • Angle Modulation • Probability, Random Signals andRandom Process • Noise • Performance of Communication Systems• Radio Receivers • Sampling Theory and Pulse Modulation• Waveform Coding Techniques • Digital Multiplexers • Digital DataTransmission • Digital Modulation Techniques • Performance Analysisof Digital Communication Systems • Information Theory • ErrorControl Coding • Appendices • Model Question Papers for Practice• Index.

Two Colours Edition




`

By

Dr. Sanjay Sharma

WIRELESS &CELLULAR

COMMUNICATIONS



`

• Introduction: Evolution of Mobile Communication Fundamentals• Mobile Radio Propagation • Modulation Techniques and ChannelCoding • Equilization and Diversity Techniques • Speech Coding,Spread Spectrum and Multiple Access Techniques • Elements ofCellular Radio System Design • Interference • Cell Coverage for Signaland Traffic • Cell Site and Mobile Antennas • Frequency Managementand Channel Assignment • Handoffs and Dropped Calls • WirelessNetworks • Wireless Systems and Standards • Some Emerging WirelessNetwork Technologies • Abbreviations and Acronyms • Appendices• Model Question Papers • Index.

DATACOMMUNICATION

ByDr. Sanjay Sharma

WIRELESSCOMMUNICATIONS

Unit-I

Unit-II

Unit-III

Unit-IV

• Introduction : Evolution of Mobile Radio CommunicationFundamentals • Mobile Radio Propagation.

• Spread-Spectrum Communications • Equalization and DiversityTechniques.

• Speech Coding and MultipleAccess Techniques.

• Cellular Concepts • Wireless Systems and Standards • Some EmergingWireless Network Technologies •Appendices • Index.



`

DATACOMMUNICATION

NETWORKS

Unit-I:

Unit-II:

Unit-III:

Unit-IV:

Unit-V:

• Introduction to Networks and Data Communications • Physical Layerand Data Transmission.

• Switching • The Data Link Layer.

• MediumAccess Sublayer.

• Network Layer • Network Connecting Devices.

• Transport Layer Protocol • Network Security and Cryptography •Model Question Papers • Index.

• Introduction to Computer Networks • Examples of Networks• Physical Layer and Data Transmission • Data Link Layer • MediumAccess Sublayer • Network Layer • Transport Layer •Application Layer• Glossary • Model Question Papers • Examination Papers • Index.



`

ByDr. Sanjay Sharma

ByDr. Sanjay Sharma

CONTENTS

CONTENTS

CONTENTS


CONTENTS



Introduction to

DATACOMMUNICATION

NETWORKS

CONTENTSUnit-I

Unit-II

Unit-III

Unit-IV

Unit-V

• Introduction to Data Communication and Networks • Examples ofNetworks • Physical Layer and Data Transmission.

• The Data Link Layer • MediumAccess Sublayer.

• The Network Layer • Network Hardware Components.

• Transport Layer • The TCP/IPProtocol Suite.

\•Application Layer Services • Model Question Papers • Index.

ByDr. Sanjay Sharma


(UPTU)

CONTENTSUnit-I:

Unit-II:

Unit-III:

Unit-IV:

Unit-V:

• Introduction • Digital Data Transmission • Digital ModulationTechniques• Probability and Random Variables.

• Performance nalysis of Digital Communication System.

• Spread Spectrum Communications.

• Information Theory • Error Control Coding • Previous Years QuestionPapers • Index.

ByDr. Sanjay Sharma

ByDr. Sanjay Sharma


(PTU)



`

CONTENTS



`



`

• Introduction • Digital Transmission • Digital Carrier Line Encoding• Multiplexing Techniques • Information Theory • Digital CarrierModulation and Demodulation Techniques • Appendices • ModelQuestion Papers • PreviousYear Question Papers • Index.



`By

Dr. Sanjay Sharma

CONTENTSDIGITALCOMMUNICATIONS • Introduction • Sampling Theory and Pulse Modulation • Waveform

Coding Techniques • Digital Multiplexers • Digital Data Transmission• Digital Modulation Techniques • Performance Analysis of DigitalCommunication Systems • Information Theory • Error Control Coding• Spread Spectrum Communication • Model Question Paper • Index.




`By

Dr. Sanjay Sharma

DIGITAL SIGNALPROCESSING

(UPTU)



`

Unit-I:

Unit-II

Unit-III

Unit-IV

Unit-V

• Introduction to Digital Signal Processing (DSP) • Realisation ofDigital Systems.

• Design of Infinite Impulse Response Digital Filters.

• Finite Impulse Response Filter Design.

• Discrete Fourier Transforms (DFT).

• Fast Fourier Transform Algorithms • Appendices • Previous YearQuestion Paper • Index.



ByDr. Sanjay Sharma


(For GGSIPU)

• Signals and Signal Processing • Time Domain Representation ofSignals and Systems • Transform-Domain Representation ofSignals:DTFT • Transform Domain Representation of Signals zTransform • Transform- Domain Representation of Signals: DiscreteFourier Transform (DFT) • Transform Domain Representation ofSignals: Fast Fourier Transform (FFT)Algorithms • Transform DomainRepresentation of LTI Systems • Digital Processing of Continuous-timeSignals • Digital Filter Structure • Digital Filter Design: FIR Filters• Digital Filter Design: IIR Filters • Applications of Digital SignalProcessing (DSP) • Model Question Papers • Previous Years QuestionPapers • Index.

DIGITAL CIRCUITSAND SYSTEMS

Unit I

Unit II

Unit III

Unit IV

Unit V

• Numbers Systems and Codes • Boolean Algebra and SwitchingFunctions.

• Logic Gates,Adders and Subtractors.

• Linear Wave Shaping Circuits • Logic Families.

• Combinational Logic Circuits • Semiconductor Memories • Designingwith ROM and PLA• Shift Registers • Counters.

• Signal Conversion: A to D and D to A Converters • Model QuestionPaper • Index.

• Introduction to Digital Signal Processing (DSP) • Discrete-TimeSignals • Discrete-Time Systems • The Z-Transform • Discrete FourierTransforms • Fast Fourier Transform Algorithms • Design and Analysisof Infinite Impulse Response (IIR) Digital Filters • Design andAnalysisof Finite Impulse Response (FIR) Filter Design • Realization of DigitalSystems • Finite Word Length Effects in Digital Filters • StatisticalDigital Signal Processing • Multirate Digital Signal Processing (MDSP)• Introduction to DSP Processors • Applications of Digital SignalProcessing (DSP) •Appendix • Model Question Papers • Index.

CONTENTS

CONTENTS

CONTENTS

CONTENTS

ByDr. Sanjay Sharma



`



`By

Dr. Sanjay Sharma



ANALOGCOMMUNICATION

(RGTU)

CONTENTSUnit-I:

Unit-II:

Unit-III:

Unit-IV:

Unit-V

• Introduction • Signal Analysis and Linear Time Invariant (LTI)Systems.

• Modulation Techniques

•Angle Modulation and FM Modulators.

• Radio Transmitters • Radio Receivers.:

• Noise • Noise Performance of Communication Systems • ModelQuestion Papers • PreviousYear Question Paper • Index.

ByDr. Sanjay Sharma



`

ANALOG& DIGITAL

COMMUNICATION

CONTENTS

Unit-I:

Unit-II:

Unit-III:

Unit-IV:

Unit-V:

• Introduction • Amplitude Modulation • Radio Transmitters • RadioReceivers.

•Angle Modulation • Noise.

• Sampling Theory & Pulse Modulation • Waveform CodingTechniques.

• Digital Modulation Techniques.

• Digital Multiplexers • Information Theory • Model Question Papers• Index.By

Dr. Sanjay Sharma



`

ByDr. Sanjay Sharma

ANALOGCOMMUNICATION

SYSTEMS



`

CONTENTS

• Introduction • Signal Analysis and Transmission • AmplitudeModulation : DSB-FC, DSB-SC, SSB-SC, VSB • Angle Modulation• Sampling Theory and Pulse Modulation • Probability, Random Signalsand Random Process • Noise • Performance of Communication Systems• Radio Receivers • Radio Transmitters • Objective Type Questions•Appendices • Model Question Papers for Practice • Index.



Size : 23 × 36/8Pages : 900 Approx.ISBN 13 : 978-81-89757-88-5ISBN 10: 81-89757-88-1


` By

Dr. Sanjay Sharma

MOBILE &WIRELESS

COMMUNICATIONS



`

Unit-I

Unit-II

Unit-III

Unit-IV

Unit-V

• Introduction: Evolution of Mobile Communication Fundamentals• Mobile Radio Propagation.

• Equalization and Diversity Techniques • Speech Coding and MultipleAccess Techniques.

• Cellular Concepts

• Wireless Networks • Wireless Systems and Standards.• Some Emerging Wireless Network Technologies • An

Overview of CDMA2000, WCDMA and EDGE • WirelessArchitectures •Appendices +• Model Question Paper • Index.

ELECTRONICPRINCIPLES

ByDr. Sanjay Sharma

WIRELESSCOMMUNICATION

SYSTEMS

Unit - I

Unit - II

Unit - III

Unit - IV

Unit - V

• Services and Technical Challenges • Principle of Cellular Networks• MultipleAccess Techniques.

• Wireless Propagation Channels: Mobile Radio Propagation.

• Wireless Transceivers.

• Signal Processing in Wirless Systems: Diversity Techniques • SignalProcessing in Wireless Systems: Speech Coding Techniques.

• Spread Spectrum Systems • An Overview of CDMA and WCDMA• Wireless Networks • Wireless Systems and Standards • Review ofBasic Digital Modulation Techniques • Model Question Paper • Index.



`

Fundamentals of

ELECTRONICDEVICES

Unit I

Unit II

Unit III

Unit IV

Unit V

• Semiconductor Materials and Crystal Properties • Energy Bands andCharge Carriers in Semiconductors.


• Junction Properties.

• Bipolar Junction Transistors (BJTs) • Field Effect Transistors.

• Photonic Devices • Negative Conductance Microwave Devices• Some Special Power Devices • PreviousYear Question Papers • Index.

• Basic Aspects of Electronics • Semiconductor Materials • DiodeFundamentals • Rectifiers and Filters • Clippers and Clampers • SpecialDiodes • Bipolar Junction Transistor • Small Signal Low FrequencyTransistor • Transistor at High Frequency • Field Effect Devices: JFET• MOSFETS • MOSFETS as Amplifier and Switch • CascadedAmplifiers: MultistageAmplifiers • Frequency Response • Large SignalAmplifiers: Power Amplifiers • Tuned Voltage Amplifiers• Feedback Amplifiers • Oscillators • Multivibrators • OptoelectronicDevices • Thyristors • Wave Shaping Circuits • Time Base Generators• Differential Amplifier • Operational Amplifier • Applications of OpAmp • Electronic Instrumentation and Measurements • SwitchingTheory and Logic Design • Objective Type Questions • ModelQuestions Paper • Index.



`

ByDr. Sanjay Sharma

ByDr. Sanjay Sharma

CONTENTS

CONTENTS

CONTENTS

CONTENTS




SIGNALSAND

SYSTEMS

(JNTU)

CONTENTSUnit-I:

Unit-II:

Unit-III:

Unit-IV:

Unit-V:

Unit VI:

Unit-VII:

Unit-VIII:

• SignalAnalysis.

• Fourier Series Representation of Periodic Signals.

• Fourier Transforms.

• Signal Transmission Through Linear Systems.

• Convolution and Correlation of Signals.

• Sampling.

• Laplace Transforms.

• Z-Transforms • Model Question Papers • Index.

ByDr. Sanjay Sharma

SIGNALSAND

SYSTEMS

CONTENTS

Unit-I

Unit-II

Unit-III

Unit IV

Unit-V

• Signals • Systems.

• Continuous-Time Fourier Transform (CTFT) • Discrete-Time FourierTransform (DTFT).

• Laplace Transforms.

• Z-Transforms.

• Time and Frequency Characterisation of Signals and Systems• Sampling • Model Question Paper • Index.

ByDr. Sanjay Sharma

ByDr. Sanjay Sharma

Principles of

COMMUNICATIONSYSTEMS



`

CONTENTS



`



`

Section-A:

Section-B:

Section-C:

Section-D:

• Introduction to Communication Systems • Fourier Analysis of Signals

•Amplitude Modulation •Angle Modulation.

• PulseAnalog Modulation • Pulse Digital Modulation.

• Digital Modulation Techniques • Introduction to Noise • Previous YearQuestion Papers • Index.



`

By

Dr. Sanjay Sharma


COMMUNICATIONENGINEERING

Section-A:

Section-B:

Section-C:

Section-D:

• Introduction • Spectral Analysis • Correlation: Cross-Correlation andAuto-Correlation.

• Information Theory.

• Random Signal Theory-I.

• Random Signal Theory-II • Optimum Filters • Introduction to LinearBlock Codes and Cyclic Codes • Model Question Papers • Index.



Price: 275/-Eight Edition : 2013

`

By

Dr. Sanjay Sharma

Fundamentals of


Size: 20 × 30/8Pages: 525 Approx.ISBN:


`

Unit-I

Unit-II

Unit-III

Unit-IV

Unit-V

• Introduction to DSP• Sampling.

• TransformAnalysis of LTI Systems.

• Structures for Discrete-Time Systems.

• Filter Design Techniques: IIR Filter Design • Finite Impulse ResponseFilter Design.

• Discrete Fourier Transforms • Efficient Computation of the DFT: FastFourier Transforms • Index.

Elements of

(UTU)

ANALOGCOMMUNICATION

ByDr. Sanjay Sharma

DIGITALSIGNAL

PROCESSING

(MDU)

Unit-I

Unit-II

Unit-III

Unit IV

Unit-V

Unit-VI

• Introduction to Digital Signal Processing • Discrete-Time Signals.

• Discrete-Time Systems.

• Sampling of Time Signals.

• The Z Transform (ZT).

• Finite Impulse Response Filter Design • Design of Infinite ImpulseResponse Digital Filters • Finite World Length Effects in DSP•Applications of DSP.

• Multirate Digital Signal Processing (MDSP) • PreviousYear QuestionPapers • Index.



`

Fundamentals of

SIGNALSAND

SYSTEMS

Section-A:

Section-B:

Section C:

Section-D:

• Signals.

• Fourier Transform (FT): Continuous-Time Fourier Transform (CTFT)• Discrete-Time Fourier Transform (DTFT).

• Introduction to Systems • Time and Frequency Domain Analysis ofSystems.

• The Laplace Transform (LT) • The Z-Transform (ZT) • ModelQuestion Paper • Index.

Unit-I & II:

Unit-III:

Unit-IV:

Unit-V:

• Introduction • Amplitude Modulation • Radio Transmitter andReceiver.

•Angle Modulation.

• Sampling Theory and Pulse Modulation • Digital Transmission ofAnalog Signals: Pulse Code Modulation (PCM) • Issues in DigitalTransmission: Multiplexing and Line Coding.

• Noise Associated with Communication System • Appendix • ModelQuestion Paper • Index.



`

ByDr. Sanjay Sharma

ByDr. Sanjay Sharma

CONTENTS

CONTENTS

CONTENTS

CONTENTS




Fundamentals of


CONTENTSUnit I

Unit II

Unit III

Unit IV

Unit V

• Introduction • Amplitude Modulation • Single Sideband Modulation• Radio Receivers.

• Angle Modulation • Noise • Noise Analysis in CommunicationSystems.

• Analog Pulse Modulation • Digital Transmission • Digital ModulationTechniques.

• Radio Wave Propagation • Satellite Communication • WirelessSystems and Standards.

• Television • Fibre Optical Communication • Index.By

Dr. Sanjay Sharma

DIGITALELECTRONICS

ANDLOGIC DESIGN

CONTENTS• Introduction • Number Systems • Binary Codes • Logic Gates• Boolean Algebra • Minimization of Switching Functions• Combinational Logic Circuits and Design • Flip-flops • Shift Registers• Counters • Analysis and Design of Sequential Logic Circuits• Asynchronous Sequential Logic: Analysis and Design• Hazards • Memory and Programmable Logic Devices • AlgorithmicState Machines (asms) • Logic Families • A to D and D to A Converters• Timing Circuits • Model Question Papers • Index.

ByDr. Sanjay Sharma

ByDr. Sanjay Sharma

MICROELECTRONICS(Analog & Digital)



`

CONTENTS



`



`

• Review of Linear Circuit Theory • Operational Amplifiers• Semiconductor Materials • Introduction to Non-Linear CircuitElements • Signal Processing and Conditioning with Two TerminalNon-Linear Devices • Three Terminal Devices • AnalogAmplification-I • Analog Amplification-II • Differential Amplifiers• Frequency Response and Time Dependent Circuit Behaviour• Multistage and PowerAmplifiers •Active Filters • Oscillators • DigitalCircuits • Fundamentals of Digital System • Semiconductor Memories• Converters • Digital Integrated Circuits Design • WaveformGenerators • Junction Properties • Model Question Paper • Index.



`

By

Dr. Sanjay Sharma

CONTENTSDIGITAL CIRCUITSAND

LOGIC DESIGN

PartA

Part B

• Number Systems • Boolean Algebra • Logic Gates • Logic Families• Combinational Logic Circuits.

• Synchronous Circuits : Flip-Flops • Synchronous Circuits : ShiftRegisters • Sequential Circuits : Counters • Memory Devices • SignalConversions • Model Question Papers • Previous Year Question Papers• Index.




`

By

Dr. Sanjay Sharma

DATACOMMUNICATION

NETWORKS



`

Unit-1

Unit-2

Unit-3

Unit-4

Unit-5

• Introduction • Example Networks • Physical Layer.

• Data Link Layer • Medium Access Sublayer • Network HardwareComponents.• Network Layer.

• Transport Layer.

• Application Layer • World Wide Web (www) • Model Question Paper• Index.

A Textbook of

SIGNALSAND SYSTEMS

ByDr. Sanjay Sharma

Question Bank in

ELECTRONICS &COMMUNICATION

ENGINEERING

• Materials and Components • Electronic Devices and Circuits• Network Analysis and Synthesis • Electromagnetic Field Theory(EMFT) • Electronic Measurements and Instrumentation • PowerElectronics • Analog Electronics • Digital Electronics • AutomaticControl Systems • Communication Systems (Analog and Digital)• Radio Receivers • Microwave Communication • SatelliteCommunication • Microprocessors • Signals and Systems • SolvedModel Papers.

ADVANCESEMICONDUCTOR

DEVICES

Unit -I

Unit- II

Unit- III

Unit - IV

Unit - V

• Semiconductor Material and Their Properties • Carrier Transport inSemiconductors • Excess Carriers in Semiconductors.

• Junctions and Interfaces.

• Majority Carrier Diodes.

• Microwave Diodes • Optoelectronics Devices.

• Metal Semiconductor Field- Effect Transistors • MOS Transistors• Charge - Coupled Devices. • PreviousYear Question Paper • Index.

Unit-I

Unit-II

Unit-III

Unit-IV

Unit-V

• Introduction to Signals • Introduction to Systems

• Fourier Series Representation of Signals

• Fourier Transform• Discrete-time Fourier Transform (DTFT)

• The Z-Transform • The Laplace Transform

• Sampling• Model Question Paper • Index.



`

CONTENTS

CONTENTS

CONTENTS

CONTENTS

ByDr. Sanjay Sharma

ByDr. Sanjay Sharma



`




BASICELECTRONICS

CONTENTS• Introduction to Electronics • Semiconductor Materials and Properties• Semiconductor Diodes • Semiconductor Diode Applications • SpecialDiodes • Bipolar Junction Transistor (BJT): Fundamentals and DCBiasing • Transistor as an Amplifier • Field Effect Devices: JFETS andMOSFETS • Operational Amplifier • Feedback: Fundamentals andApplications • Sinusoidal Oscillators • Digital Electronics • ElectronicsInstruments • Special Power Devices: Thyristors • Fundamentals ofCommunication Engineering • Model Question Papers • Index.

ByDr. Sanjay Sharma

Principles of


CONTENTSUnit - I

Unit - II :

Unit - III :

Unit - IV :

Unit - V :

:Introduction to DSP• Discrete Fourier Transforms.

Efficient Computation of DFT: FFTs.

Filter Structures.

Design of Digital Infinite Impulse Response (IIR) Filters • Design ofInfinite Impuse Response (FIR) Filters • Introduction to MultirateDigital Signal Processing (MDSP).

Adaptive Wiener Filter and LMS Algorithm • Applications of DSP andCoding • Index.By

Dr. Sanjay Sharma

ByDr. Sanjay Sharma

LINEARINTEGRATED

CIRCUITS



`

CONTENTS



`



`

Unit-I

Unit-II

Unit-III

Unit-IV

Unit-V

• Introduction to Differential Amplifier and Op-Amps • Op-AmpConfigurations with Feedback.

• OperationalAmplifierApplications • Oscillators.

•Active Filters.

• Phase Locked Loops.

• Analog Multiplier Circuits • Voltage Regulators • Integrated CircuitTimer 555 • Model Question Papers • Index.



`

By

Dr. Sanjay Sharma

CONTENTSCOMMUNICATIONENGINEERING • Introduction to Communication Engineering • Noise • Amplitude

Modulation • Signal Sideband Modulation • Angle Modulation • RadioReceivers • Radio Wave Propagation • Analog Pulse Modulation• Digital Transmission • Multiplexing • Antennas • SatelliteCommunication • Television Principles • Radar System • OpticalCommunication • Introduction to Wireless Networks • Introduction toWireless Systems and Standards • Mobile Communication Concepts• OSI Reference Model and Network Architecture • Digital ModulationTechniques • Index.




`

By

Dr. Sanjay Sharma

Fundamentals of




`

Unit - I :

Unit - II :

Unit - III & IV :

Unit - V :

• Introduction • Information Theory.

• Waveform Coding Techniques • Digital Baseband Transmission.

• Introducation to Signal Space Analysis • Digital ModulationTechniques • Spread Spectrum Communications.

Error Control Coding• Model Question Papers• Index.

DIGITALELECTRONICS

AND DESIGNASPECTS

ByDr. Sanjay Sharma

A Textbook of

DIGITALCOMMUNICATION

SYSTEM

Unit One

Unit Two

Unit Three

Unit Four

• Elements of Digital Communication System.

• Pulse Code Modulation.

• Line Coding • Multiplexing Techniques.

• Digital Carrier Modulation and Demodulation Techniques • OptimumReception of Digital Signals • PreviousYear Question Paper • Index.

A Textbook of

(PTU)


Unit One

Unit Two

Unit Three

Unit Four

• Introduction • Discrete Fourier Transform (DFT) • Fast FourierTransformAlgorithms.

• The Z-Transform.

• Design of Digital Filters • Design Methods for (FIR) Filters • DesignMethods for IIR Filters • Finite Word Length Effects in Digital Filters.

• DSPProcessors • PreviousYear Question Paper • Index.

Unit-One

Unit-Two

Unit-Three

Unit-Four

Unit-Five

• Introduction: Digital System and Binary Numbers • Boolean Algebra& Gate Level Minimization.

• Combinational Logic Circuits.

• Sequential Logic Circuits: Flip-Flops • Synchronous SequentialCircuits: Shift Registers • Counters and Analysis and Synthesis ofSynchronous Sequential Circuits.

• Logic Families.

• Hazards and Fault Detection • Memories • Model Question Paper• Index.



`

CONTENTS

CONTENTS

CONTENTS

CONTENTS

ByDr. Sanjay Sharma

ByDr. Sanjay Sharma



`




DIGITAL DESIGNCONTENTS

Unit-1

Unit-2

Unit-3

Unit-4

Unit-5

• Number Systems and Conversions • BooleanAlgebra and Logic Gates• Gate-Level Minimization.

• Combinational Logic:Analysis and Design.

• Synchronous Sequential Logic:Analysis and Design.

•Asynchronous Sequantial Logic:Analysis and Design • Hazards.

• Memory and Programmable Logic Devices • State Machine Designwith SM Charts • Model Question Paper • Index.

ByDr. Sanjay Sharma

ELECTRONICDEVICES

CONTENTSUnit-I

Unit-II

Unit-III

Unit-IV•Unit-V

• Introduction • Energy Bands and Charge Carriers in Semiconductors.


• Junctions

MOSFETs.

• Bipolar Junction Transistors (BJTs) • Optoelectronic Devices • ModelQuestion Paper • Index.

ByDr. Sanjay Sharma

ByDr. Sanjay Sharma

ANALOG ANDDIGITAL

ELECTRONICS



`

CONTENTS



`



`

• Special Diodes • Amplifiers • Feedback • Basic Sinusoidal Oscillator• Boolean Algebra and Logic Gates • Combinational Logic Circuits• Sequential Logic Circuits • Op-Amp and its Characteristics • VoltageRegulators • Model Question Paper • Index.



`

By

Dr. Sanjay Sharma


DIGITALELECTRONICS

Unit-One

Unit-Two

Unit-Three

Unit-Four

Unit-Five

• Number Systems • BooleanAlgebra and Basic Logic Gates.

• Digital Logic Gate Characteristics.

• Minimization Techniques.

• Combinational Systems .

• Sequential Systems • Model Question Paper • Index.





`

CONTENTS

CONTENTS

CONTENTS

CONTENTS




`By

Dr. K.M. Soni

BASICSYSTEM ANALYSIS



`

• Signals • Systems • Analogous Systems • Fourier Series • FourierTransform and its Application • Laplace Transform and its Applications• z-Transform and its Applications • State Variable Analysis•Appendices • Index.

CIRCUITANALYSIS

AND SYNTHESIS

ByDr. K.M. Soni

CIRCUITSAND

SYSTEMS

• Introduction • Signals and Waveform Synthesis • Circuit Analysis byClassical Method • Laplace Transform • Circuit Analysis by LaplaceTransform • Graph Theory • Network Theorems • Two-Port Networks• Network Functions and Response • Network Synthesis • z-Transformsand its Applications • Filter Synthesis • Feedback Amplifiers• Oscillators • Fourier Series • Fourier Transform and its Applications• Analogous Systems • State Variable Analysis • Magnetically CoupledCircuits •Appendices • Index.

CIRCUITSAND

SYSTEMS

• Introduction to Circuit Elements • Signals and Waveform Synthesis• Circuit Analysis by Classical Method • Laplace Transform • CircuitAnalysis by Laplace Transform • Graph Theory • Network Theorems• Two-Port Networks • Network Functions and Responses • NetworkSynthesis • Filter Synthesis •Appendices • Index.

• Introduction to Circuit Elements • Network Theorems • MagneticallyCoupled Circuits • Transient Analysis by Classical Method • TransientAnalysis by Laplace Transform • Fourier Series • Two Port Networks• Network Function • Network Synthesis •Appendices • Index.


Price: 295/-Eleventh Edition: 2014

`

CONTENTS

ByDr. K.M. Soni

ByDr. K.M. Soni



`



SIGNALSAND

SYSTEMS

CONTENTS• Signals • Laplace Transform and itsApplications • z-Transform and itsApplications • Fourier Series • Fourier Transform and its Applications• Fourier Analysis of Discrete-Time Signals and Systems • Systems• Linear Time Invariant Systems • Continuous Time Convolution andCorrelation Time and Frequency Domain Analysis of Systems• Sampling •Appendices • Index.

ByDr. K.M. Soni

SIGNALSAND

SYSTEMS

CONTENTS• Signals • Systems • Linear Time Invariant Systems • Fourier Series• Fourier Transform and its Applications • Fourier Analysis of Discrete-time Signals and Systems • Time and Frequency Characterization ofSignals & Systems • Sampling • Laplace Transform and itsApplications• z-Transform and itsApplications •Appendices • Index.

ByDr. K.M. Soni

By

Dr. K.M. SoniP.M. Tiwari

Ayushi Sharma

ADVANCEDCONTROL SYSTEMS



`

CONTENTS


Price: 285/-Fifth Edition: 2014

`


Price: 275/-Fifth Edition: 2015

`

Part-A: Digital Control Engineering

Part-B: Optimal Control

Part-C: Non-Linear SystemAnalysis

• Sampling and Signal Conversion • The z Transform • TransferFunction, Block Diagrams and Signal Flow Graphs • Transform Designof Digital Controls • State Space Analysis of Sampled Data Systems• Design of Digital Controls Using State Space Analysis• Mechanization of ControlAlgorithms.

• Optimal Control • Optimal Feedback Control • Stochastic OptimalLinear Estimation and Control • Microprocessor Control and SingleBoard Controller • Digital Signal Processor (DSP) Control.

• Second Order System and Phase Plane • Describing FunctionAnalysis•Appendices • PreviousYear Question Papers • Index.


Price: 340/-Tenth Edition: 2015

` By

Dr. K.M. Soni

CONTENTSNETWORKANALYSIS

ANDSYNTHESIS

• Introduction • Signals and Waveform Synthesis • Graph Theory• Network Theorems • Two Port Networks • Network Functions• Stability and Responses • Network Synthesis • Filters • Appendix•Answers to Unsolved Problems • Bibliography • Index.





`



`

CONTENTS

CONTENTS

CONTENTS

CONTENTS




`

By

Dr. K.M. Soni

NETWORKANALYSIS



`

• Introduction to Circuit Elements • Magnetically Coupled Circuits• Transient Analysis of the Circuits • Phasor Algebra and AC Circuits• Resonance in R-L-C Circuits • Graph Theory • Network Theorems• Two-Port Networks • Network Functions • Laplace Transform and itsApplications • Fourier Series • Fourier Transform and its Applications•Appendices •Answers to Unsolved Problems • Index.

NETWORKANALYSIS AND

SYNTHESIS

ByDr. K.M. Soni

NETWORKTHEORY

• Signals and Waveform Synthesis • Introduction to Network • NetworkAnalysis by Classical Method • Laplace Transforms • Two-PortNetworks • Network Functions • Network Synthesis • Transfer FunctionSynthesis • Introduction to Active Network Synthesis • Graph Theory•Appendices • Index.

Fundamentals of

NETWORKANALYSIS AND

SYNTHESIS

• Signals and Waveform Synthesis • Introduction to Network • NetworkAnalysis by Classical Method • Laplace Transforms • Two-PortNetworks • Network Functions • Network Synthesis • Transfer FunctionSynthesis • Introduction to Active Network Synthesis • Appendix• Index.

• Introduction to Circuit Elements • Signals and Waveform Synthesis• Network Theorems • Laplace Transform and Its Applications• Network Functions and Responses • Network Synthesis • FilterSynthesis •Appendices • Index.

ByDr. K.M. Soni



`



`

ByDr. K.M. Soni



PROBABILITYRANDOM

VARIABLES ANDSTOCHASTIC

METHODS

CONTENTS• The Meaning of Probability and Set Theory • Random Variables andDistribution Functions • Multiple Random Variables • Reliability andRandom Sums • Stochastic Processes • Queuing Theory • SpectralDensities, Random Walks and other Applications • Estimation, Entropyand Statistics • Markov Chains and Markov Processes • SimpleCorrelation and Regression Analysis • Appendices • Model QuestionPapers • Bibliography • Index.

By

Himanshu ChaurasiyaDr. K.M. Soni

Fundamentals of

ELECTRIC DRIVESAND CONTROL

CONTENTS• Fundamentals of Electric Drives • Control of Electric Drives• Dynamics of Electric Drives • Selection of Motor Power Rating • DCMotor Drives • AC Motor Drives •Appendices • Index.

ByDr. B.R. Gupta

Vandana Singhal

ByDr. B.R. Gupta

Vandana Singhal

Question Bank in

ELECTRONICS andCOMMUNICATION

ENGINEERING



`

CONTENTS



`



`

• Electrical and Electronic Materials and Components • PhysicalElectronics, Electronic Devices and ICs • Signals and Systems• Network Theory • Electromagnetic Theory • Electrical and ElectronicsInstruments • Analog Electronic Circuits • Power Electronics • DigitalElectronics • Control Systems • Microprocessors and Computers• Communication Systems • Microwave Engineering • Model TestPaper (I & II) • Bibliography.



`By

Dr. B.R. GuptaV. Singhal

CONTENTSDIGITALELECTRONICS • Introduction • Number Systems and Codes • Logic Gates • Boolean

Algebra and Logic Simplification • Logic Families • Design ofCombinational Logic Circuits • Arithmetic Circuits • Encoders,Decoders and Display Devices • Multiplexers and Demultiplexers• Latches and Flip Flops • Waveform Generators • Counter • ShiftRegisters • Analysis and Design of Sequential Logic Circuits• Memories • Programmable Logic Devices • A/D and D/A Converters• Arithmetic Logic Unit • Introduction to Microprocessors • DigitalSystems • Experimental Work •Appendices • Bibliography • Index.



CONSUMERELECTRONICS



`

CONTENTS• Sound Waves • Radio Waves • Modulation and Demodulation• Amplifiers • Microphones • Loudspeakers • Public Address Systems• Magnetic Sound Recording • Tape Recorder • Audio Compact DiscSystems • High Fidelity Audio Systems • Stereo Sound Systems• Monochrome Television • Colour Television • Cable Television• Video Cassette Recorder • Miscellaneous Devices • Trouble Shootingand Repair • Experimental Work •Appendices • Index.

ByDr. B.R. Gupta

V. Singhal

ByDr. B.R. Gupta

V. Singhal

ByDr. B.R. Gupta

Vandana Singhal

POWERELECTRONICS

CONTENTS• Power Diodes and Transistors • Thyristors • Controlled Rectifiers• Inverters • Choppers •AC Regulators • Cycloconverters •Applicationsof Thyristors • DC and AC Motor Drives • Power Supplies • Harmonics• Integrated Circuits and Operational Amplifiers • Number Systems• Logic Gates and Boolean Algebra • Digital Electronic Circuits• Microprocessors • Experimental Work • Appendices • Bibliography• Index.

POWERELECTRONICS



`

CONTENTS• Power Semiconductor Devices, Symbols and Static Characteristics• Power Semiconductor Devices, Symbols and Static Characteristics• DC-DC Converters • Phase Controlled Converters • AC VoltageControllers • Cycloconverters • Inverters • Experimental Work•Appendices • Bibliography • Index.

CONTENTS• Thyristors Principles and Characteristics • Phase Controlled Rectifiers• Inverters • Choppers • Cycloconverters • Control of DC Drives• Control ofAC Drives •Appendices • Index.

Introduction to

ELECTRIC DRIVES



`

ByDr. B.R. Gupta

Vandana Singhal



`



INDUSTRIALELECTRONICS ANDINSTRUMENTATION


Price: 170/-`

CONTENTS• Thyristors • Heat Sinks • Applications of Thyristors• Controlled Rectifiers • AC Phase Control • Applications of PhaseControlled Rectification and AC Phase Control Circuits• Inverters • Induction and Dielectric Heating • Introduction toInstrumentation • Transducers • Signal Conditioners • Output Devicesand Displays • Subject Review Questions • Solution to NumericalProblems • Experiments • Previous Examination Question Papers• Index.

By

Sunil Kumar

Fundamentals of

SATELLITECOMMUNICATION

CONTENTS• Overview of Satellite Systems • Orbits and Launching Methods • TheGeostationary Orbit • Polarization and Depolarization • Space Segment• Earth Segment-I • Earth Segment-II • The Space Link • SatelliteSubsystems • Satellite Services • Appendices • Short Answer Questions• Objective Type Questions • Glossary • Model Test Papers • Index.

By

Sapna Katiyar

A Textbook of

OPTICAL FIBERCOMMUNICATION

SYSTEMS



`

CONTENTS• Introduction • Optical Fiber Waveguides • Optical Fiber Materials andFabrication Techniques • Signal Degradation in Optical Fiber • OpticalSources : LED • Optical Sources : Laser • Optical Detectors • Analysisand Performance of Optical Receiver • Optical Networks • Appendices• Glossary • Objective Type Questions with Answers • Model TestPapers • Index.

By

Sapna Katiyar



`

CONTENTS• Introduction to Optical Fiber Communication • Optical FiberWaveguides • Transmission Characteristics of Optical Fibers • OpticalSources 1 : The Laser • Optical Sources 2 : The Light Emitting Diode• Optical Detectors • Direct Detection Receiver PerformanceConsiderations • Optical Fiber Communication Systems • CoherentOptical Fiber Systems • Appendices • Glossary • Objective TypeQuestions with Answers • Model Test Papers • Previous YearsExamination Papers • Index.




`

By

Sapna Katiyar






`

CONTENTS• Introduction • Orbital Mechanism and Launching of Satellite• Satellite Subsystems • Satellite Channel and Link Design• Propagation Effects and their Impact on Satellite Earth Links • EarthStation Technology • Introduction to Various Satellite Systems• Satellite Applications • Global Mobile Satellite Systems • Appendices• Short Answer Questions • Glossary • Model Question Papers• PreviousYear Examination Papers • Index.

BySapna Katiyar

BySapna Katiyar

BySapna Katiyar

Introduction to


CONTENTS• Overview of Satellite Systems • Orbits and Launching Method • TheGeostationary Orbit • Space Segment • Earth Segment • Space Link• Satellite Access • Direct Broadcast Satellite Services • SatelliteServices • Appendices • Short Answer Questions • Objective TypeQuestions • Glossary • Model Question Papers • Index.

ELECTRONICSWITCHING



`

CONTENTS• Evolution of Switching System • Introduction to Switching System• Electronic Switching System • Digital Switching • Space DivisionSwitching • Time Division Switching • Teletraffic Engineering• Control of Switching Systems • Signalling • Packet Switching• Asynchronous Transfer Mode (ATM) Network • Appendices• Glossary • Objective Type Questions • Model Test Papers • PreviousYear Examination Paper • Index.

CONTENTS• Evolution of Switching System • Electronic Switching System• Telecommunication Transmission and Multiplexing • DigitalSwitching • Telecom Traffic Engineering • Network SynchronizationControl and Management • Digital Subscriber Access • DSLTechnology • Appendices • Glossary • Objective Type Questions• Index.

TELECOMMUNICATIONSWITCHING

SYSTEMS



`

BySapna Katiyar



`



A Textbook of




`

CONTENTS• Introduction • Orbital Aspects of Satellite Communication• Communication Satellite Link Design • Satellite Subsystems• Earth Station Technology • Satellite Analog Communication• Satellite Digital Communication • MultipleAccess Techniques • Laserand Satel l i te Communicat ion • Satel l i te Applicat ions• Appendices • Short Answer Questions • Glossary • Model QuestionPapers • Examination Papers • Index.

By

Sapna Katiyar

SATELLITECOMMUNICATIONS

CONTENTS• Introduction • Orbital Mechanism and Launching of Satellite• Satellite Channel and Link Design • Propagation Effects and theirImpacts on Satellite Links • Satellite Analog Communication • SatelliteDigital Communication • Earth Segment: Satellite Earth Station • SpaceSegment: Communication Satellite Subsystems • Multiple AccessTechniques • Demand Assignment Multiple 1 Access Techniques• Spread Spectrum Techniques and Code Division Multiple Access• Error Control Coding for Digital Satellite Links • SatelliteApplications • Laser and Satellite Communication • Direct BroadcastSatellite Services • VSAT and Global Positioning Satellite Systems• Global Mobile Satellite Systems • Special Purpose CommunicationSatellites • Objective Type Questions • Short Answer Questions• Glossary • Model Question Papers • Index.By

Sapna Katiyar

Fundamentals of




`

CONTENTS• Introduction • Optical Fibers • Dispersion Effect • Optical Fiber Losses• Nonlinear Optical Effects • Optical Fibers : Manufacturing, Cablesand Connectors • Optical Transmitters • Optical Sources : LightEmitting Diode and Laser • Optical Receivers • Optical Detectors• Light Wave Systems • Multichannel Systems • Appendices • Glossary• Objective Type Questions • Model Question Papers • ExaminationPapers • Index.

By

Sapna Katiyar



`

CONTENTS• Introduction • Evolution of Basic Switching System • Control ofSwitching System • Error Detection and Correction Codes• Multiplexing Techniques • Space Division Switching • Time DivisionSwitching • Teletraffic Engineering • Telecommunication Transmissionand Subscriber Loops • Signalling • Satellite Communication • SatelliteApplications • Glossary • Objective Type Questions • Index.

TELECOMMUNICATIONNETWORKS



`

By

Sapna Katiyar



OPTICALCOMMUNICATION



`

CONTENTS• Introduction to Optical Communication • Optical Fiber Waveguides• Optical Fiber Materials and Fabrication Techniques • TransmissionCharacteristics of Optical Fibers • Optical Fiber : Connectors, Joints,Couplers, Isolators and Measurement Techniques • Optical Sources 1 :The Laser • Optical Sources 2 : The Light Emitting Diode • PowerLaunching and Coupling • Optical Detectors • Optical Receivers • LinkDesign and Multichannel Systems • Appendices • Glossary • ObjectiveType Questions with Answers • Model Test Papers • Previous YearExamination Papers • Index.

BySapna Katiyar

BySapna Katiyar

BySapna Katiyar

Introduction to


CONTENTS• Introduction • Propagation in Dielectric Waveguides • AttenuationMechanism in Optical Fibers • Wave Propagation • Optical Sources• Optical Detectors • Optical Fiber Communication System • AdvancedMultiplexing Strategies • Appendices • Glossary • Objective TypeQuestions withAnswers • Model Test Papers • Index.


SYSTEMS



`

CONTENTS• Introduction • Optical Fibers • Fiber Characteristics • Fiber Couplersand Connectors • LED Light Source • Laser Light Source • Avalancheand Pin Photodetectors • Optical Fibers Materials and FabricationTechniques • Appendices • Glossary • Objective Type Questions withAnswers • Model Question Paper • Index.

CONTENTS• Introduction to Microwave • Microwave Devices • Waveguides• Microwave Components • Microwave Antenna • MicrowaveCommunication System • Radar • Satellite Communication• Experiments • PreviousYear Question Papers • Index.

MICROWAVEAND

RADARENGINEERING



`

ByEr. Rajesh Dhiman



`



MICROPROCESSORS



`

CONTENTS

ByShweta GoyalSwati Gargust

ByShweta GoyalSwati Gargust

INDUSTRIALELECTRONICS

ANDCONTROL OF DRIVES

CONTENTS• Introduction to SCR • Controlled Rectifier • Inverter • Special PowerSupply • DC Motor Drives • AC Motor Drives • PLC (ProgrammableLogic Controller) • Static Control Machine • Laboratory Practicals• Index.



`

EMBEDDEDSYSTEMS



`

CONTENTS• Introduction to Embedded Systems •ARM Embedded Systems •ARMProcessor Architecture • ARM Programming Instructions • ARMProgramming Instructions: Thumb Instructions • C Programming• Writing and Optimising ARM Assembly Code • ARM AddressingModes • Exception and Interrupt Handling • Interfacing Peripherals• Model Question Papers • Index.

By

Anurag Arora


• Microprocessor Architecture • Microprocessor Instruction• Interfacing and Data Transfer Schemes • Interrupts and InterfacingProcess Interrupts • Advance Microprocessor and Controller • LabManuals • Index.


VLSI DESIGNWITH VHDL

(Analog & Digital)



`

CONTENTS• Introduction to Integrated Circuits • VLSI Components, Integrationand Bipolar Technology • Review of MOSFET, IGFET and MOSFabrication Technology • MOS-Basic Circuits • Combinational Circuitand PLA Programmable Logic Devices • Sequential Circuits Networks• Testing • Introduction to VHDL• Experiments •Appendix • Index.

ByDr. R.K. Singh

ByDr. R.K. Singh

BySampath K.Venkatesh

VLSI(Technology, Design &

Basics ofMicroelectronics)

CONTENTS• Introduction to VLSI Technology • Film Deposition • Epitaxy Process• Diffusion Process • Ion Implantation • Lithography • Photoresist andEtching • MOSFET and MOS Fabrication Technology • SimulationProcess (IC Fabrication Steps) • Bipolar IC Technology • Appendices• Examination Paper • Index.

8051MICROCONTROLLER

&EMBEDDED SYSTEMS



`

CONTENTS• 8051 Microcontroller • Introduction to 8051 Assembly Programming• Jump, Loop and Call Instructions • Input Output Port Programming• Addressing Modes • Arithmetic Instructions and Programs • LogicInstructions and Programs • Single Bit Instructions and Programming• Counter/Timer Programming in the 8051 • Introduction to 8051Assembly Programming • Interrupts • Real-World Interfacing • RealWorld Interfacing Steeper Motor, Keyboard and Sensors • Real-WorldInterfacing ADC/DAC • Introduction to Embedded Systems (ES) andits Design • External Memory Interfacing with 8051 • PIC and AVRMicrocontrollers • Interfacing Devices • Advanced Processors• Hardware Fundamentals for Embedded Developers • 8051 Programs• Appendices • Model Test Paper (Solved) • Model Test Paper(Unsolved) • Index.

CONTENTS• 8051 Microcontroller • Introduction to 8051 Assembly Programming• Jump, Loop and Call Instructions • IO Port Programming •AddressingModes • Arithmetic Instructions and Programs • Logic Instruction andPrograms • Single Bit Instructions and Programming • Counter/TimerProgramming • The 8051 Serial Port • Interrupts • Real-WorldInterfacing • Real-World Interfacing Steeper Motor, Keyboard andSensors • Real-World Interfacing ADC/DAC • External MemoryInterfacing with 8051 • Interfacing Devices • Hardware Fundamentalsfor Embedded Developers • 8051 Programs • Appendices • ModelQuestion Paper • PrviousYear Question Papers • Index.

8051MICROCONTROLLER



`

BySampath K.Venkatesh



`



DIGITAL CIRCUITSYSTEM

Using VHDL



`

CONTENTS• Introduction to VHDL • VHDL Statements • Combinational andSequential Circuit Design • Design of Microcomputer andProgrammable Device • VHDL Program for Lab • Question Bank• Model Question Paper • Index.

ByShipra Gupta

Neelu Chaudhary

ByShipra Gupta

DIGITAL CIRCUITSAND

SYSTEMS

CONTENTS• Basics of Digital Electronics • Combinational Circuits • LogicFamilies • Designing of Sequential Circuits • A/D and D/A Converter• Index.

DIGITAL LOGIC&

DESIGN

CONTENTS• Fundamental of Digital Techniques • Logic Simplification• Combinational Logic Circuits and its Design • Sequential LogicCircuits and its Design • Digital Logic Families • D/A and A/DConverters (Data Converters) • Programmable Logic Devices• Sequential Logic Design • Experiments • Question Papers • Index.

CONTENTS• Introduction • Number Systems • Codes and Parity • LogicGates • Log ic S impl i f i ca t ion • Ar i thmet ic Ci rcu i t s• Multiplexer/Demultiplexer • Decoder Display Devices andAssociated Circuits • Encoders and Comparators • Latches and FlipFlops • Counter • Shift Register • Logic Families • Experiments• PreviousYear Question Papers • Index.

DIGITALELECTRONICS

(For Polytechnics)



`

ByPratima ManhasShaveta Thakral



`



`By

Pratima ManhasShaveta Thakral



VLSIDESIGN



`

CONTENTS• Review of MOS Technology • MOS Transistor Theory • MOS Circuitsand Logic Design • Circuit Characterization and PerformanceEstimation • VLSI Fabrication • Design Examples Using CMOS• Sequential (Memory MOS Circuits) • Semiconductor Memories• Design of Combinational Elements & Regular Array Logic • VHDLProgramming • PreviousYears Question Papers • Index.

ByPratima ManhasShaveta Thakral

ByAshutosh Gupta

Neeraj Gupta

CONTROLSYSTEMS

ENGINEERING

CONTENTS• Basic Concepts of Control System • Feedback and its Characteristics• Control System Components • Time Response Analysis of ControlSystem • Introduction to Controllers • State Space Analysis • StabilityAnalysis • Root Locus • Frequency Response Analysis • StabilityAnalysis Using Polar and Nyquist Plot • Introduction to Non-linearSystems • Mat-Lab • Index.

Introduction to

MICROPROCESSORSAND

INTERFACINGWITH

APPLICATIONS



`

CONTENTSUnit I : The 8085 Processor

Unit II : The 8086 MicroprocessorArchitecture

Unit III : Instruction Set of 8086

Unit IV : Interfacing Device

Unit V : DMA

Unit VI : Interrupt and Timer

• Introduction to Microprocessors • Microprocessor 8085

• Microprocessor 8086

• Instruction set of Microprocessor 8086

• Interrupt Structure of 8086

• DMAController 8237A

• Programmable Interrupt Controller 8259A • Programmable IntervalTimer/ Counter 8254 • Programmable Peripheral Interface 8255A• Interfacing with Applications • Programs for 8085 Microprocessor•Appendices • Examination Papers • Index.

CONTENTS• Electromagnetic Theory (Vector Analysis) • Electrostatic Fields• Magnetostatic Fields • Time Varying Fields : Maxwell’s Equations andBoundary Conditions • Electromagnetic Waves • Transmission Lines• Guided Waves • Waveguides • Resonator • ElectromagneticRadiations • Electromagnetic Interference and ElectromagneticCompatibility • Miscellaneous Solved Examples • Objective TypeQuestions • Answers to Tutorial Problems • Appendices • References• University Question Papers • Question Bank for B.Tech • ModelQuestion Paper • Examination Papers with Solutions • Index.

ELECTROMAGNETICFIELDS & WAVES



`

ByR. Gowri



`

ByDr. S. Panda

S. PadhyS.R. Das






`

CONTENTS

• Introduction • Basics of Wireless Systems and Networks• Digital Communication Through Fading Multipath Channels• Multiple Access Techniques for Wireless Communications• Wireless Networking • Wireless Systems and Standards• Wireless Local Area Networks (WLAN) • Future Trends•Appendices • PreviousYears Examination Papers • Index.

ByAman KundraAmita Sandhu

ByK. Sudeep Singh

TROUBLE SHOOTING& MAINTENANCE

OFELECTRONICEQUIPMENTS

CONTENTS• Repair, Servicing and Maintenance Concepts • TroubleshootingProcedures • Troubleshooting Techniques • Testing PassiveComponents • Testing Semiconductor Devices • Troubleshooting ofDigital Systems • Troubleshooting of Various Electronic Equipments• Log Book and History Sheet •Appendix (Hand-Tools) • Index.

Fundamentals of

TELEVISION ANDRADAR

ENGINEERING

CONTENTSPart-I: Television Engineering

Part-II: Radar Engineering

• Introduction to Television • Basic Principles of Television Engineering• TV Camera Tubes • Monochrome Television Transmitters andReceivers • Essential of Colour Television • Colour Television Systems• Television Display Systems • TelevisionApplications.

• Introduction to Radar • CW and Frequency Modulated Radar • MTIand Pulse Doppler Radar • Radar Transmitter and Receiver • RadioDirection Finder • Range Systems • Hyperbolic Electronic NavigationalSystems • DME and TACAN • Electronics Aids to Approach andLanding System • Tracking Radar • Question Bank • Index.

CONTENTS• Principles of Satellite Communication • Communication SatelliteLink Design • Analog Satellite Communication • Digital SatelliteCommunication • Multiple Access Techniques • Satellite Orbits• Special Purpose Communication Satellite • Laser SatelliteCommunication • Question Bank • Glossary • Previous YearsExamination Papers • Index.

Fundamentals of


ENGINEERING



`

ByK.K. Sharma



`



`

ByK.K. Sharma



Fundamentals of

RADAR, SONARAND

NAVIGATIONENGINEERING



`

CONTENTSPart-I: Fundamentals of Radar and Sonar Engineering

Part-II: Fundamentals of Navigation and Guidance Engineering

• An Introduction to Radar • The Radar Equation • CW and FrequencyModulated Radar • MTI and Pulse Doppler Radar • Tracking Radar• Radar Transmitter • Radar Receiver and Duplexers • Radar DisplayUnits • RadarAntennas • Detection of Radar Signal in Noise • RadiationHazard • Electronic Counter Measures and Electronic Counter-CounterMeasures • Extraction of Information from Radar Signals • RadarSignal Models • Radar Waveforms.

• Navigation • Radio Direction Finders (RDF) • Radio Ranges• Hyperbolic Electronic Navigational Systems • DME and TACAN• Electronics Aids to Approach and Landing System • NavigationSatellite • Guidance • Appendix • Glossary • References • ExaminationPapers • Index.

ByK.K. Sharma

DIGITAL ANDANALOG

COMMUNICATION

CONTENTS• Introduction to Communication • Theoretical Basis for DataCommunication • Modulation • Data Encoding • Transmission MediaCommunication and Transmission Modes • Flow Control • NetworkSwitching Systems • Telephone Systems • Transmission Errors• Cryptography • Examination Papers • Index.

Fundamentals of

VOICE ANDDATA

COMMUNICATION



`

CONTENTSUnit I

Unit II

Unit III

Unit IV

Unit V•

• Telephone Instruments and Signals • Telephone Circuits.

• Public Telephone Networks.

• Multiplexing of Telephone Channels.

• Introduction to Data Communication • Interface Standards• Transmission Media.

Error Detection and Correction • Switching • Glossary • Index.

CONTENTS• Digital Communication • Digital Modulation • Data Communication• Data Communication Hardwares Devices • The Telephone Networks• Data Communication Protocols • Network Configurations • IntegratedService Digital Network (ISDN) • Multiplexing • Internet and TCP/IP• Model Test Paper • Examination Papers • Index.

Fundamentals of

DATACOMMUNICATION



`



`

ByK.K. Sharma

ByK.K. Sharma

ByK.K. Sharma



Fundamentals of

RADAR & SONARENGINEERING



`

CONTENTS• Introduction to Radar • Radar Equation • CW and FrequencyModulated Radar • MTI and Pulse Doppler Radar • Tracking Radar• Radar Receivers and Duplexers • Radar Displays • Introduction toSonar •Appendices • PreviousYear Examination Papers • Index.

ByK.K. Sharma

ByK.K. Sharma

Introduction to

RADAR SYSTEMS

CONTENTS• Introduction to Radar • The Radar Equation • MTI and Pulse DopplerRadar • Tracking Radar • Detection of Signals in Noise • Informationfrom Radar Signals •Appendices • Index.

TELEVISION ANDRADAR

ENGINEERING

CONTENTSPart-I: Television Engineering

Part-II: Radar Engineering

• Introduction to Television • Basic Principles of Television Engineering• Television Standards • Television Pick-up Devices and Cameras• Colour Fundamentals • Colour Television System • Television DisplaySystem • Monochrome Television Transmission and Reception • DigitalTelevision Technology • Other Television Systems .

• Introduction to Radar • Radar Range Equation • CW and FM-CWRadar • Moving Target Indicator Radar • Radar Receivers • RadarDisplays • Other Radar Systems • Appendix • Examination Paper• Index.

CONTENTS• Microwave Tubes • Microwave Semiconductor Devices • MicrowaveComponents • Microwave Measurements • Introduction to RadarSystems • Radar Range Equation • Doppler Radars • Moving TargetIndicator (MTI) Radar • Scanning and Tracking Techniques•Appendices • Examination Papers • Index.

MICROWAVE &RADAR

ENGINEERING



`

ByK.K. Sharma



`



`

ByK.K. Sharma



VLSI DESIGN



`

CONTENTS• MOS Transistors • MOSFET Fabrication • MOS Circuit DesignProcesses • MOS Inverters • Combinational MOS Logic Circuits• Dynamic Logic Circuits • Clocking Strategies for CMOS LogicCircuits • Semiconductor Memories • VLSI Design Methodologies•Appendix • Examination Papers • Index.

By

Deepak Garg

VLSI DESIGN CONTENTS• VLSI Design Methodologies • MOSFET Fabrication • MOS CircuitDesign Processes • MOS Transistor • MOS Inverters • CombinationalMOS Logic Circuits • Sequential MOS Logic Circuits • Dynamic LogicCircuits • Semiconductor Memories • Low-Power CMOS LogicCircuits • CMOS Testing •Appendices • Examination Papers • Index.

By

Deepak Garg

VLSICIRCUITDESIGN



`

CONTENTS• Review of MOS Transistor • MOSFET Fabrication • MOS CircuitDesign Processes • MOS Inverters • Power Consumption for CMOSCircuits • Combinational MOS Logic Circuits • Dynamic Logic Circuits• Sequential MOS Logic Circuits • Semiconductor Memories • CMOSTesting •Appendix • Papers • Index.

ByDeepak Garg



`

CONTENTS• VLSI Design Methodologies • Basic Circuits for Digital System• Specification of Sequential Machine • Asynchronous SequentialMachine • State Machines • Fault Detection of Combinational Circuits• Semiconductor Memories • Model Paper • Index.

Introduction to

VLSICIRCUITS AND

SYSTEMS



`

By

Deepak Garg



VLSITECHNOLOGY



`

CONTENTS• ERA of Integrated Circuit • Silicon Wafer Preparation• Oxidation • Epitaxial Process • Diffusion • Ion Implantation• Lithography • Etching • Metallization • VLSI Process Integration• Assembly Techniques and Packaging • Yield and Reliability• Examination Paper • Index.

By

Deepak Garg

Fundamentals of

VLSI DESIGN

CONTENTS• Technology in VLSI Design • CMOS Testing • Device Modeling• Circuit Simulation • Structured Digital Circuits and Systems • MOSProcessing Technology • MOS Circuit Design Processes • Model TestPapers • Index.

By

Deepak Garg

Basics of

With VHDL

VLSI DESIGN



`

CONTENTS• Introduction to VHDL • VHDL Statements • Application of VHDL• MOS Transistors • MOS Inverters • Circuit Characterization andPerformance Estimation • Low-Power CMOS Logic Circuits• Experiments • Index.

By

Deepak Garg



`

CONTENTS• Electromagnetic Field Radiation • Antenna Terminology • AntennaArrays • Practical Antennas • Propagation • Antenna Measurements• Multiple Choice Questions • Appendices • Previous Years QuestionPapers • Index.

ANTENNA ANDWAVE

PROPAGATION



`

By

A.K. Gautam



ANTENNA, WAVEPROPAGATION ANDTV ENGINEERING


Price : 265/-Second Edition: 2012

`

CONTENTS• Electromagnetic Field Radiation • Antenna Terminology • AntennaArrays • Practical Antennas • Propagation • Television System• Multiple Choice Questions • Appendices • Previous Year QuestionPapers • Index.

By

Dr. A.K. Gautam

MICROWAVEAND

RADARENGINEERING

CONTENTS• Introduction • Basic Transmission Line Theory • MicrowaveWaveguide • Microwave Cavity Resonators and Components• Microwave Measurements • Microwave Tubes • MicrowaveSemiconductor Devices • Microwave Radiation Hazards • MicrowaveCommunication Systems • Radar Systems • Satellite Communication• Experiments • PreviousYear Question Paper • Index.

By

Dr. A.K. Gautam

MICROWAVEENGINEERING


Price: 225/-Sixth Edition: 2013

`

CONTENTSUnit-I

Unit-II.

Unit-III

Unit-IV

• Introduction • Microwave Waveguide.

• Microwave Components and Elements • Microwave Tubes

• Microwave Solid-State Devices.

• Microwave Measurements • Radar Systems • Experiments • ModelQuestion Paper • Index.

ByDr. A.K. Gautam



`

CONTENTS• Introduction • Amplitude Modulation • Frequency and PhaseModulation (Angle Modulation) • Principles of AM Modulators• Principles of FM Modulators • Demodulation of AM Waves• Demodulation of FM Waves • Pulse Modulation Systems • DigitalPulse Modulation • Experiments • Short Questions Answers • ModelPapers • Examination Papers • Index.

Principles of




`

By

Dr. A.K. Gautam



COMMUNICATIONSYSTEMS-I



`

CONTENTS• AM/FM Transmitters • AM/FM Receivers • Antenna• Propagation • Fiber Optic Communications • Satellite Communication• Experiments • Short Questions Answers • Model Paper • ExaminationPapers • Index.

By

A.K. Gautam

COMMUNICATIONSYSTEMS-II

CONTENTS• Digital and Data Communication • Coding • Digital ModulationTechniques • Data Transmission Circuits • UART and USART • Modem• Network and Control Consideration • Telemetry • Radio PagingSystems: Concept and Applications • Electronic Exchange • CellularMobile Telephone Systems • Facsimile • Carrier Telephony • FiberOptic Communication •Examination Papers • Index.

By

A.K. Gautam

CONTROLSYSTEMS



`

CONTENTS• The Control System • Time Response Analysis • Steady State Errorsand Error Constant • Frequency Domain Analysis • Stability Theory• Compensation Techniques • State Space Analysis of Control System• Control System Components • Basic Control Actions and ControllerCharacteristics • Miscellaneous Problems • MATLAB Programs• Model Test Papers • Previous Year Question Papers with Solutions• References • Index.

By

S. Hasan Saeed


Price: 395/-`

Reprint: 2015

CONTENTS• Input-Output Relationship • Time Domain Analysis • Error Analysis• Frequency Domain Analysis • Stability Theory • CompensationTechniques • Non-Linear System Analysis • State Space Analysis ofControl Systems • Control System Components • The LaplaceTransforms • Basic Control Actions and Controller Characteristics• Miscellaneous Problems • MATLAB Programs • Objective TypeQuestions • Model Test Papers • Previous Year Question Papers withSolutions • References • Index.

AUTOMATICCONTROLSYSTEMS




`

By

S. Hasan Saeed

Two Colour Edition



CONTROLSYSTEMS-I



`

CONTENTS• Input-Output Relationship • Time Domain Analysis • Error Analysis• Frequency Domain Analysis • Stability Theory • State Space Analysisof Control System • The Laplace Transforms • Miscellaneous Problems• MATLAB Programs • Model Question Papers • References • Index.

By

S. Hasan Saeed

BASIC SYSTEMANALYSIS

CONTENTS• Introduction to Continuous Time Signals and Systems • AnalogousSystem • The Laplace Transform • Fourier Series • Fourier Transform• State Variable Analysis • Z-Transform • Previous Year QuestionPapers • Index.

BySyed Hasan SaeedFaizan Arif Khan


Basics of

SIGNALS &SYSTEMS



`

CONTENTSIntroduction to Continuous Time Signals and Systems • AnalogousSystem • The Laplace Transform • Fourier Series • Fourier Transform• State Variable Analysis • Z-Transform • Previous Year QuestionPapers • Index.

CONTENTS• Vectors • Electrostatics • Electric Field in Materials • Magnetostatics &Magnetic Field in Materials • Electromagnetic Waves • TransmissionLines • Objective Type Questions • Previous Year Question Papers• Index.

ELECTROMAGNETICFIELD THEORY



`




`




SYSTEMS



`

CONTENTS• Introduction to Wireless Communication Systems • Modern WirelessCommunication Systems • Introduction to Cellular Mobile Systems• Cellular System Design Fundamentals • Multiple Access Techniquesfor Wireless Communication • Wireless Networking • Intelligent CellConcept and Application • Appendices • Solutions to SelectedNumerical Problems • Model Question Papers • Solutions to ModelQuestion Paper-1 • Solved Examination Paper • References • Index.

By

Brijesh Verma

DIGITAL ANDANALOG

COMMUNICATION(Including Fourier Analysis, Data

Communication)

CONTENTS• Communication System Components • Data Transmission System• Standard in Data Communications • Security in Data Communications•Appendices • References • Paper • Index.

By

Brijesh Verma

MOBILECOMMUNICATION(Including GSM, CDMA, EDGE,

GPRS)



`

CONTENTS• Introduction to Cellular Mobile Systems • Elements of Cellular RadioSystems Design and Interference • Cell Coverage for Signal andAntenna Structure • Frequency Management and Channel Assignment,Handoff & Dropped Calls • Modulation Methods and Coding for ErrorDetection and Correction • Multiple Access Techniques • SecondGeneration, Digital and Wireless Systems • Appendices • PreviousYears Examination Papers • References • Index.

By

Brijesh Verma



`

CONTENTS• Introduction to ATM • ATM Network • ATM Traffic Management• Signalling • ATM Protocol and Signalling • ATM System Design andImplementation • ATM and B-ISDN • ATM Miscellaneous • ATM inMPLS Networks • Glossary •Acronyms • Index.

ATMNETWORKS



`

ByBrijesh Verma

Pragyan Verma



ADVANCEDCOMMUNICATION

SYSTEMS


Price : 210/-Second Edition: 2014

`

CONTENTS• Spread Spectrum Modulation • Orthogonal Frequency DivisionMultiplexing (OFDM) • Multi-Antenna System • Cognitive Radio• Cooperative Communications •Appendix • Glossary • Index.

ByBrijesh Verma

Pragyan Verma

ELECTRICALENGINEERINGMATERIALS &ELECTRONICCOMPONENTS

CONTENTS• Classification of Materials • Conducting Materials • SemiconductingMaterials • Insulating Materials • Dielectric Materials • MagneticMaterials • Materials for Special Purposes • Electronic Components• Printed Circuit Boards and Surface Mounted Devices • IntegratedCircuits • Index.

ByK.B. Raina

Dr. S.K. BhattacharyaT. Joneja

ByR.N. Baral

TELEMETRY ANDDATA

TRANSMISSION



`

CONTENTS• Telemetry • Digital Modulation Techniques • Error Control Coding• Data Handling Systems • Digital Data Transmission and Processing• Remote Control Systems • Data Reception System • Command andTracking Systems • Aerospace Telemetry • Telecontrol Principles• References • Index.

CONTENTS• Basic Concepts and Electronic Components • Semiconductor Physics• Semiconductor Diode and Special Diodes • Bipolar Transistors• Transistor Biasing and Stabilization of Operating Point • Single StageTransistor Amplifiers and -Parameters • Field Effect Transistor• Constant Voltage and Current Sources • Vacuum & Gas Tubes• Regulated D.C. Power Supply • Short Questions with Answers• Solved Question Papers • Experiments •Appendices • Index.

h

ELECTRONICDEVICES

ANDCIRCUITS-I



`

ByM.L. Anand



`



ELECTRONICDEVICES

ANDCIRCUITS-II



`

CONTENTS• Multistage Transistor Amplifiers • Transistor Audio Power Amplifiers• Feedback in Amplifiers • Sinusoidal Oscillators • Tuned VoltageAmplifiers ( Class C Amplifiers) • Opto-electronic Devices and theirApplications • Operational Amplifiers (Op Amps) • WaveshapingCircuits • Multivibrators • Regulated Power Supply • Experiments•Appendices • PreviousYears Question Papers with Solutions • Index.

By

M.L. Anand

ELECTRONICDEVICES

ANDCIRCUITS - III(Power Electronics )

CONTENTS• Wave Shaping Circuits • Multivibrator (MV) Circuits • Timer I.C.• Time-Base Circuits (Sweep Generators) • Integrated Electronics andICs • Regulated Power Supply and (Special Power Supplies) • PLL &VCO • Thyristors and UJT • Operational Amplifiers (Op-Amps)• Introduction to Digital Electronics and Microprocessors• Experiments •Appendices • Solved Question Papers • Index.

By

M.L. Anand

ELECTRONICINSTRUMENTS

ANDMEASUREMENTS



`

CONTENTS• Basics of Measurements • Essentials of Analog Instruments• Galvanometers, Ammeters and Voltmeters • Wattmeters & EnergyMeters • Analog Multimeter (MM) • Electronic (DC and AC)Voltmeters • Cathode Ray Oscilloscope (CRO) • Signal Generators &Analysis Instruments • Impedance or AC Bridges and Q Meter• Introduction to Digital Electronics • Digital Instruments • ShortAnswer Questions • Experiments • Appendix • Solved Question Papers• Index.

By

M.L. Anand



`

CONTENTS• Introduction to Transducers, Sensor and Display Systems• Generalized Configurations and Functional Descriptions ofMeasuring Instruments • Generalized Performance Characteristics ofInstruments • Measurement of Displacement • Measurement of Force,Torque, Shaft Power • Temperature Measurement • PressureMeasurement • Flow Measurement • Level Measurement • DisplayDevices and Systems • Basic Electronics • Monitors and Recorders• Microprocessors and Computers in Instrumentation • Appendices• Index.

TRANSDUCERSSENSORS

ANDDISPLAY SYSTEMS

Size : 20 × 26/8Pages : 400 ApproxISBN : 978-93-5014-399-5


`

By

Rakesh Kumar



ELECTRICALINSTRUMENTATION

ANDCONTROL SYSTEM


Price : 265/-First Edition: 2011

`

CONTENTS• Introduction • Transducer-I • Transducer-II • Measurement of Force,Torque and Shaft Power • Pressure Measurement • TemperatureMeasurement • Flow Measurement • Level Measurement • Telemetryand DataAcquisition System • Display Devices and Systems • Monitorsand Recorders • Microprocessors and Computers in Instrumentation• Principles of Process Control • Analog Controllers • DigitalControllers • Sampling and Signal Conversion • The z-Transform• Transfer Functions, Block Diagrams and Signal Flow Graphs• Transform Design of Digital Controls • State Space Analysis ofSampled Data Systems • Design of Digital Control Using State SpaceAnalysis • Mechanization of Control Algorithms UsingMicroprocessors •Appendices • References • Index.

ByDr. O.N. Pandey

ByDr. O.N. Pandey

INSTRUMENTATIONAND

PROCESS CONTROL

CONTENTS• Instrumentation • Generalized Performance Characteristics • Sensorsand Transducers • Measurement of Force, Torque and Shaft Power• Pressure Measurement • Temperature Measurement • FlowMeasurement • Level Measurement • Telemetry • Display Devices andSystems • Monitors and Recorders • Microprocessors and Computers inInstrumentation • Introduction to Control Systems • Principles ofProcess Control • Analog Controllers • Digital Controllers • Aspects ofModern Control Systems • Some Typical Processes, Control Systemsand Modelling • Analytical Methods for Process Control • BasicElectronics •Appendix • References • Index.

ByDr. O.N. Pandey

Fundamentals of

BIOMEDICALINSTRUMENTATION



`

CONTENTS• Introduction • Bioelectric Potentials • Transducers • Electrodes• Cardiovascular Measurements • Patient Care and Monitoring• Measurements in the Respiration System • Diagnostic Techniques• Biotelemetry • Therapeutic and Prosthetic Devices • Nervous System• Ophthalmology Instruments • Some General Topics • Monitors andRecorders • Shock Hazards and Prevention • Microprocessors andComputers in Biomedical Instrumentation • Basic Electronics forBiomedical Instrumentation • Practicals in Biomedical Instrumentation•Appendices • References • Index.

CONTENTS• Introduction • Basic Concepts • Demand Forecasting • MarketStructure • National Income, Inflation and Business Cycles • Money andBanking System • Economic Fluctuations Unemployment and Inflation• Case Studies • Production Planning and Control • Value Engineering• Quality Management • Maintenance Functions • General Maintenance• SWOTAnalysis • Glossary •Appendices • References • Index.

ENGINEERINGAND

MANAGERIALECONOMICS



`

ByDr. O.N. PandeyBhupesh Aneja



`



TECHNICALWRITING



`

CONTENTS• Communication • Techniques of Writing • Scientific Articles andResearch Paper • Technical Note Making • Meetings • Glossary•Appendices • References • Index.

By

Dr. O.N. Pandey

NETWORK FILTERSAND

TRANSMISSIONLINES

CONTENTS• Introduction to Networks • Attenuator • Filters • Transmission Line• Network Theorems • Experiments • Index.

BySatish Kumar

Rajesh ChhikaraShamshad Alam

ELECTROMAGNETICFIELD THEORY



`

CONTENTSUnit-I: VectorAlgebra and Theorems

Unit-II: Electrostatics

Unit-III: Magnetostatics

Unit-IV: Electromagnetic Waves

Unit-V: Transmission Lines

• VectorAlgebra • Integral Theorems.

• Electrostatics • Capacitance.

• Magnetostatics.

• Maxwell’s Equations • Electromagnetic Waves • Wave Propagation.

• Transmission Lines • UHF Lines and Smith Chart • Equalizers andAttenuators •Appendices • PreviousYear Question Papers • Index.

By

Parul Dawar



`

CONTENTS• Transistor BIAS Stability • Midband Analysis of Small SignalAmplifiers • Frequency Response of Amplifier • Large SignalAmplifiers • Rectifiers and Power Supplies • Model Question Papers• Index.

ELECTRONICCIRCUITS



`

ByM. Elangovan



ELECTROMAGNETICSAND ANTENNAS



`

CONTENTS• Introduction • Electromagnetic Waves • Wave Guides • TransmissionLines • Electromagnetic Radiation from Antenna • Antenna Parameters• Linear Wire Antenna’s • Antenna Arrays • Aperture antenna’s • RadioWave Propagation • Model Test Papers • Previous Year Question Papers• Index.

ByH. Singh

ByRakesh Kumar

BIO-MEDICALSIGNAL

PROCESSING

CONTENTS• Introduction to Biomedical Signal Processing • Sources of BioelectricPotentials • Basics of ECG, EEG, EMG, and ERG • Transducers andElectrodes and Biomedical Application • Role of Computers inBiomedical Instrumentation • Data Reduction Techniques • QRSDetection • Evoked Potential Estimation • Neurological SignalProcessing • Monitors and Recorders •Appendix • Index.

ByC.P. Verma

VLSI DESIGN



`

CONTENTS• Introduction to VLSI • MOSFET Fabrication • MOS Transistor • MOSInverter • Combinational MOS Logic Circuits • Sequential MOS LogicCircuits • Dynamic Logic Circuits • Semiconductor Memories • LowPower CMOS Logic Circuits • Design for Testability • ProgrammableLogic Structures, FPGA and ASICs • Packaging and Parametric Yield• Appendix • Previous Year Question Papers • Model Question Papers• Index.

CONTENTS• Microprocessors and its Overview • 8085 Microprocessor (8-Bit)• 8086 Microprocessor • 8086 Interrupt Structure • Memory Interfacingand Address Decoding Techniques for 8086 Microprocessor • 8086Instruction Set • Techniques for Assembly Language Programmingwith DOS and BIOS Functions for 8086 Microprocessor • Input/OutputChips and Their Interfacing with 8086 Microprocessor • The 80286/287Microprocessors The 80386/387/486 Microprocessors • The PentiumProcessor • Application of Microprocessors • 8051 Microcontroller•Appendix • Question Bank • Model Test Papers • Index.

MICROPROCESSORSAND

INTERFACING



`

ByNikhil Marriwala



`



MICROCONTROLLERAND

EMBEDDED SYSTEMS



`

CONTENTS• Microprocessors and Microcontrollers • Introduction toMicrocontrollers • PIC Microcontroller • 8051 Microcontroller• Real TimeApplications of 8051 Microcontroller • Embedded Systems• AVR Microcontrollers • Appendices • Glossary • Experiments• Bibliography • Model Test Papers • Examination Papers • Index.

By

Ankaj Gupta

By

Ankaj Gupta

By

Ankaj Gupta

Fundamentals of

MICROCONTROLLERAND

EMBEDDED SYSTEMS

CONTENTS• Microprocessors and Microcontrollers • 8051 Microcontroller• Instruction Set Summary • Assembly/C Programming forMicrocontroller • Design and Interface with Real Time Application• PIC Microcontroller • Applications of Microcontroller inCommunication System • Practicals • Appendix • Glossary• Bibliography • Examination Papers • Index.

MICROPROCESSORSAND

MICROCONTROLLERS



`

CONTENTS• Introduction to Microprocessor • Introduction to 8085 Microprocessor• 8085 Instruction and Programming • 8051 Microcontroller • 8051Assembly Language Programming • Serial Communication • 8051Interfacing with Real Time Application • AVR Microcontrollers•Appendices • Glossary • Bibliography • Model Test Papers • Index.



`

CONTENTSSection-A: Waveguides

Section-B : Microwave Components and Tubes

Section-C : Microwave Solid State Devices and Measurements

Section-D : Radar

• Introduction to Microwave • Waveguides.

• Microwave Components • Ferrite Devices • Microwave Tubes.

• Microwave Solid State Devices • Microwave Measurement.

• Radar • Doppler Radars • Practical Experiments • Bibliography• Glossary • Examination Papers • Index.

MICROWAVEAND

RADARENGINEERING



`

ByRavi Garg

Ankaj Gupta



OPTICALNETWORKS



`

CONTENTSUnit 0:

Unit I:

Unit II:

Unit III:

Unit IV:

Unit V:

• Optical Networks.

• Introduction to Optical Networks.

• Optical Components.

• Sonet/SDH Networks • Optical Transport Networks • WDM NetworkElements.

• WDM Network Design Issues & Introduction to Access Networks• Network Survivability and Protection Mechanisms.

• Optical Switching and Deployment Considerations • Appendices • Glossary• Model Question Papers • PreviousYears Question Papers • Index.

BySachin Gupta

BySachin Gupta

Fundamentals of

RADAR &NAVIGATION

CONTENTSUnit-0: Introduction to Radar Systems

Unit-1: Radar Signal Models

Unit-2: RadarWaveforms

Unit-3: Detection Fundamentals

Unit-4: Navigation Systems-I

Unit-5: Navigation Systems-II

• Introduction to Radar Systems.

• Radar Signal Models.

• Radar Waveforms.

• Detection Fundamentals.

• Radio Direction Finding • Radio Ranges • Hyperbolic Systems ofNavigation.

• Aids to Approach and Landing • Doppler Navigation • SatelliteNavigation Systems • Question Bank • Appendices • Glossary • SamplePapers and PreviousYear Question Papers • Index.

BySachin Gupta




`

CONTENTSUnit-1Unit-2Unit-3Unit-4Unit-5Unit-6

• Introduction• Optical Fibers• Optical Transmitters• Optical Receivers• Lightwave Systems• Multichannel Systems

• Appendix • Model Question Papers • Previous Years Question Papers• Index.

CONTENTS• Introduction to Optoelectronics • Light and its Properties • OpticalFibre and its Properties • Optoelectronic Sources/Detectors and LaserFundamentals • Industrial Applications of Laser • OptoelectronicAmplifiers and Modulators • Interferometry • Holography and FourierOptics • Optical Fiber Sensors • Fiber Optic Fundamentals andMeasurements • Optical Computing • Multiple Choice Questions•Appendices • Model Question Papers • Examination Papers • Index.

OPTICALINSTRUMENTATION



`

BySatyajit Das



`



ANTENNA ANDWAVE

PROPAGATION



`

CONTENTS• Antenna Basics • Radiation • Isotropic Point Sources and Arrays ofPoint Sources • Effect of Earth on Pattern • Loop Antenna • PracticalAntennas • Reflector Antenna • Antenna Measurement• Electromagnetic Wave Propagation • Multiple Choice Questions• Examination Question Papers • Index.

By

Prashant Pandey


By

Dr. Sanjay Sharma

DATA ANDCOMPUTER

COMMUNICATIONS



`

CONTENTS

CONTENTS• Introduction • Introduction to Neural Networks • Artificial NeuralModel • Single Layer Feed forward Neural Network • Multilayer Feedforward Neural Networks • Associative Memory Network• Classical and Fuzzy Sets • Fuzzy Logic System Components • NeuralNetwork Application • Solved Examination Papers • References• Index.

NEURALNETWORKS

AND FUZZY LOGIC

ByK. Vinoth Kumar

R. Saravana Kumar


Price: ` 195/-Reprint: 2014

CONTENTS

Releasing Shortly

DATA ANDCOMPUTER

COMMUNICATIONS

Dr. Sanjay Sharma

• Introduction • Introduction to Neural Networks • Artificial NeuralModel • Single Layer Feed forward Neural Network • Multilayer Feedforward Neural Networks • Associative Memory Network• Classical and Fuzzy Sets • Fuzzy Logic System Components • NeuralNetwork Application • Genetic Algorithms • Neuro-Fuzzy Systems• Fuzzy Arithmetic • Fuzzy Logic • Uncertainty Based Information• References • Index.

SOFTCOMPUTING

ByK. Vinoth Kumar



`


By

Dr. Sanjay Sharma

Question Bank in


ENGINEERING



`

CONTENTS• Materials and Components • Electronic Devices and Circuits• Network Analysis and Synthesis • Electromagnetic Field Theory(EMFT) • Electronic Measurements and Instrumentation • PowerElectronics • Analog Electronics • Digital Electronics • AutomaticControl Systems • Communication Systems (Analog and Digital)• Radio Receivers • Microwave Communication • SatelliteCommunication • Microprocessors • Signals and Systems • SolvedModel Papers.

SOFTCOMPUTING

(With Neural Networks, FuzzyLogic and Genetic Algorithm)



`

CONTENTS• Neural Networks-I (Introduction and Architecture) • NeuralNetworks-II (Back Propagation Networks) • Fuzzy Logic-I(Introduction) • Fuzzy Logic- II (Fuzzy Membership, Rules) • GeneticAlgorithm (GA) • Annexures • Model Question Papers • Previous YearsQuestion Papers • References • Index.

By

Dr. Neeta Awasthy

By

Gunjan Goswami

Introduction to

ARTIFICIAL NEURALNETWORKS



`

CONTENTS

CONTENTS• Introduction to Neural Networks • Essentials of Artificial NeuralNetworks • Single Layer Feed Forward Neural Networks • MultilayerFeed Forward Neural Networks • Associative Memory • Fuzzy • FuzzyLogic System Components • Applications of Neural Networks andFuzzy Logics •Appendices • Index.

NEURALNETWORKS

ANDFUZZY LOGIC

ByDr. R.P. DasL. Sreedhar


Price: ` 185/-First Edition : 2012


• Overview of Biological Neurons • Fundamental Concepts ofArtificialNeural Networks • Single Layer Perception Classifier • Multi LayerFeed Forward Networks • Single Layer Feedback Network• Associative Memories • Hamming Networks and Self OrganizingNetworks • Hybrid Expert Systems • Basics of Fuzzy Logic • GeneticAlgorithms • Question Bank • Model Test Papers • Previous YearsSolved Examination Papers • Index.

ByJ.B. Gupta


ELECTRONICS ANDCOMMUNICATION

ENGINEERING

CONTENTS• Network Theory • Electromagnetic Field Theory • Signals andSystems • Materials and Components • Electronic Devices andComponents • Analog Electronic Circuits • Power Electronics • DigitalElectronic Circuits • Electronic and Electrical Measurements andInstruments • Electrical and Electronics Instrumentation • ControlSystems • Communication Systems • Microwave Engineering• Computer Engineering • Model Test Papers • References.

ByJ.B. Gupta

GATE 2015ELECTRONICS ANDCOMMUNICATION

ENGINEERING



`

CONTENTSUnit-I: Networks, Signals and Systems & Electromagnetics

Unit-II: Electronic Devices andAnalog Circuits

Unit-III: Digital Circuits and Microprocessors

Unit-IV: Control Systems and Communications

Unit-V: Engineering Mathematics

Unit-VI: GeneralAptitude (GA)

• Networks • Signals and Systems • Electromagnetics

• Electronic Devices •Analog Circuits

• Digital Circuits • Microprocessors

• Control Systems • Communications

• Engineering Mathematics

• Verbal Ability • Numerical Ability • Model Test Papers • GATE-2014Question Paper.



`


CONTENTS• Electrical and Electronic Materials and Components • PhysicalElectronics, Electronic Devices and ICs • Signals and Systems• Network Theory • Electromagnetic Theory • Electrical and ElectronicsInstruments • Analog Electronic Circuits • Power Electronics • DigitalElectronics • Control Systems • Microprocessors and Computers• Communication Systems • Microwave Engineering • Model TestPapers • Bibliography.

Question Bank in

ELECTRONICS andCOMMUNICATION

ENGINEERING

ByDr. B.R. Gupta

Vandana Singhal

Size : 23 × 36/8Pages : 725 Approx.ISBN 13 : 978-93-5014-225-7ISBN 10: 81-88458-02-3


`

CONTENTS• Network Theory • Electromagnetic Field Theory • Signals andSystems • Materials and Components • Electronic Devices andComponents • Analog Electronic Circuits • Power Electronics • DigitalElectronic Circuits • Electronic and Electrical Measurements andInstruments • Electrical and Electronics Instrumentation • ControlSystems • Communication Systems • Microwave Engineering• Computer Engineering • Model Question Papers • References.

Question Bank in

ELECTRONICSAND


ByJ.B. Gupta



`


COMPUTER ENGINEERING



`

By

Er. Rajiv Chopra

DATABASEMANAGEMENT

SYSTEM



`

CONTENTS

Concepts of

DATABASESYSTEM



`

CONTENTS• Concepts of DBMS • Data Modelling Using The E-R Model• Introduction to Data Model • Introduction to SQL and its Components• Introduction to PL/SQL • Normalization • Oracle 8 Architecture• Transaction Processing Concepts • Concurrency Control Techniques• Buffer Management and Query Processing • Database Security • APractical Approach to SQL • Competitive Quiz • Tutorial Exercises• PreviousYear Question Papers • Index.

• Introduction to DBMS • Data Modelling Using the E-R- Model• Relational Data Model and Language • Introduction to SQL• Normalization • Transaction Processing Concepts • Serializabilityand Deadlock Handing • Concurrency Control Techniques• Competative Quiz • A Practical Approach to SQL • Tutorial Exercises• PreviousYear Question Papers • Index.

ByP.K. YadavA.K. Goyal

CONTENTSSOFTWAREPROJECT

MANAGEMENT

By

P.K. Yadav

• Introduction and Software Project Planning • ProjectOrganization,Scheduling and Management Issues • Project Monitoringand Control • Technical Communication • Software Quality Assurance(SQA) and Testing • Project Management and Project ManagementTools •Appendices • PreviousYear Examination Papers • Index.

Introduction to

DATABASEMANAGEMENT

SYSTEM

CONTENTS• Introduction to DBMS • Data Modelling Using the E-R- Model • FileOrganization • Relational Data Model and Language • Introduction toQuery Language • Normalization • Transaction Processing Concept• Introduction to Concurrency Control and Recovery System• Introduction to Distributed Database • Competitive Quiz • A PracticalApproach to SQL • Tutorial Exercises • Previous Year Question Papers• Index.

ByP.K. Yadav



`



SOFTWARETESTING

(A Practical Approach)

CONTENTS• Introduction to Software Testing • Software Verification andValidation • Black Box (or Functional) Testing Techniques • White Box(or Structural) Testing Techniques • Gray Box Testing • Reducing theNumber of Test Cases • Levels of Testing • Object Oriented Testing• Automated Testing • Test Point Analysis (TPA) • Testing YourWe b s i t e s : F u n c t i o n a l a n d N o n - F u n c t i o n a l Te s t i n g• Regression Testing of a Relational Database •ACase Study on Testingof E Learning Management Systems • Appendices • ExaminationQuestion Papers • Index.

ByEr. Rajiv Chopra

Fundamentals of

COMPUTING

CONTENTS• Basics of Computers • Operating Systems • Flow Charts, Networkingand DBMS • Libre Office • Experiments • Model Test Papers• Examination Paper • Index.

By

Er. Rajiv ChopraEr. Rishabh Anand

ByEr. Rajiv Chopra

OBJECT ORIENTEDSOFTWARE

ENGINEERING(A Practical Approach)



`

CONTENTS



`



`

• Introduction to Software Engineering • Requirements Elicitation• Modeling with UML •Architecture • Construction •Analysis • Testing•Appendices • PreviousYear Examination Papers • Index.



`By

Er. Rajiv Chopra

CONTENTSIntroduction to


MICROPROCESSORS • Introduction • Memory • 8-Bit Microprocessors (8085) • 8085Addressing Modes and Instruction Set with Programming • 16-BitMicroprocessor (8086) • 8086-ALP (Assembly LanguageProgramming) • Stracks and Subroutines Delays • PeripheralInterfacing •Appendices • Bibliography • Examination Papers • Index.



Size : 20 × 26/8Pages : 400 Approx.ISBN 13: 978-81-89757-14-4ISBN 10 : 81-89757-14-8


` By

Adesh K. Pandey

REQUIREMENTSAND ESTIMATION

TECHNIQUES(A Practical Approach)



`

CONTENTS

Elements of

COMPILER DESIGN



`

CONTENTSSection-A

Section-B

Section-C

Section-D

• Introduction to Compilers • Introduction to Finite Automata andRegular Expression • LexicalAnalysis.

• Syntax Analysis • Top-Down Parsing Techniques • Bottom-UpParsing Techniques.

• Syntax Directed Translation • Symbol Table Management • ErrorDetection and Recovery.

• Intermediate Code Generation • Code Optimization andGeneration • Appendix : Quick Review of Compiler Design• Examination Papers • Solved Examination Paper • Index.

• Requirements Engineering • Size Estimation • Effort, Schedule andCost Estimation • Software Requirements and Estimation • IndustryResources • Appendices • Appendices A to G • Bibliography • QuestionPapers • Index.

ByAdesh K. Pandey

CONTENTSAn Introduction to

AUTOMATA THEORY& FORMAL

LANGUAGES

By

Er. Rajiv Chopra

• Introduction to Concept of Automata • Finite Automata • Automatawith Output • Regular Expression and Languages • Properties ofRegular Languages • Context-Free Grammars and Languages• Simplified Context- Free Grammar and its Normal Form • PushdownAutomata • Properties of Context-Free Languages • Turning Machine• Extension of Turing Machine • The Chomsky Hierarchy • Lexical andSyntax Analysis • Recursive Function Theory • Tractable andIntractable Problems • Recent Trends andApplication • Index.

SOFTWARETESTING AND

QUALITYASSURANCE


ByDr. Rajiv Chopra



`

CONTENTS• Introduction to Software Testing • Software Verification andValidation • Software Quality • Black Box (or Functional) TestingTechniques • White Box (or Structural) Testing Techniques • Gray BoxTesting • Levels of Testing • Quality Assurance • Quality Standards• Reducing The Number of Test Cases • Test Management andAutomation • A Case Study on Testing of E-learning ManagementSystems • Object Oriented Testing •Appendices.



Fundamentals of

With CD

COMPILER DESIGN

CONTENTS

• Introduction to Compilers • Introduction to Finite Automata andRegular Expression • Lexical Analysis • The Syntactic and SemanticSpecification of Languages • Top-Down Parsing • Bottom-up Parsing• Syntax-Directed Translation • Type Checking • Storage Management• Symbol Table Management • Intermediate Code Generation • ErrorDetection and Recovery • Code Optimization and Generation•Appendix • Index.

ByAdesh K. Pandey

Introduction to

AUTOMATATHEORY & FORMAL

LANGUAGES

CONTENTS• Introduction to Concept of Automata • Finite Automata • Automatawith Output • Regular Expression and Languages • Properties ofRegular Languages • Context-Free Grammars and Languages• Simplified Context-Free Grammar and Its Normal Form • PushdownAutomata • Properties of Context-Free Languages • Turing Machine• Extension of Turing Machine • Recursive Function Theory • TheChomsky Hierarchy • Tractable and Intractable Problems.

ByAdesh K. Pandey

ByAdesh K. Pandey

Concepts of

E-COMMERCE



`

CONTENTS



`



`

• Introduction to E-Commerce • E-Commerce Framework• Architectural Framework of E-Commerce • Network Infrastructurefor E-Commerce • Mobile Commerce • Web Security • Encryption• Electronic Payment Systems • Net Commerce • E-Commerce Issues,Laws and Policies • Implementation of E Commerce • Appendices• Examination Papers • Index.



`

By

Adesh K. Pandey

CONTENTSINTERNETFUNDAMENTALS Unit-I: Electronic Mail and Internet

Unit-II: World Wide Web

Unit-III: Languages

Unit-IV: Privacy and Security Topics

• Electronic Mail • Introduction to Network and Internet • Working ofInternet.

• World Wide Web • HTMLand XML• Web Site Designing.

• Java Script • Servers.• Web Security and Firewall

• Privacy and Encryption Schemes • Appendices • Examination Papers(Unsolved) • Solved Question Papers of PreviousYears • Index.





`By

Adesh K. Pandey

Concepts of

COMPILER DESIGN



`

CONTENTS

Introduction to

E-COMMERCEAND ERP



`

• Introduction to Compilers • Introduction to Finite Automata andRegular Expression • Lexical Analysis • The Syntactic and SemanticSpecification of Languages • Top-Down Parsing • Bottom-up-Parsing• Syntax-Directed Translation • Storage Management • Symbol TableManagement • Intermediate Code Generation • Error Detection andRecovery • Code Optimization and Generation • Appencix • PreviousYear Examination Papers • Index.

ByAdesh K. Pandey


COMPILERDESIGN

By

Adesh K. Pandey

• Introduction • Lexical Analysis • Syntax Analysis • Top-down ParsingTechniques • Bottom-up Parsing Techniques • Syntax-DirectedTranslation • Type Checking • Run-Time Environment • Symbol TableManagement • Intermediate Code Generation • Error Detection andRecovery • Code Optimization and Generation •Appendix • Index.

Theory of

AUTOMATAAND

COMPUTATION

ByAdesh K. Pandey



`

CONTENTSSection-A

Section-B

Section-C

Section-D

• FiniteAutomata • Regular Expression • Introduction to Machines.

• Properties of Regular Sets • Context-Free Grammars and Languages• Simplified Context-Free Grammar and its Normal Form.

• Pushdown Automata • Properties of Context-Free Languages • TuringMachine.

• Chomsky Hierarchies • Computability and Recursive Function Theory• Short Questions withAnswers • Index.

CONTENTSPart-A: Introduction to E-Commerce

Part-B: Introduction to ERP

• Introduction to E-Commerce • Internet and E-Commerce • ElectronicPayment Methods • Electronic Commerce Providers • Digital PaymentSystem and Digital Currencies • Electronic Data Interchange.

• Introduction to ERP • Management Information System (MIS)• Internet and ERP • ERP Functional Modules • Information SystemProspective of ERP • Implementation of ERP • Methodology of ERPDesign • Managerial Issues in ERP • Appendix : Present and Future ofERP Market • Previous Years Examination Papers (Unsolved)• PreviousYears Examination Papers (Solved) • Index.



NETWORKSECURITY AND

ADMINISTRATION

CONTENTS

• Introduction to Network Security • Threats to Security and How MuchSecurity • State of Art Network and Security • Firewalls • IntrusionDetection System (IDS) • Authentication and Encryption • VisualPrivate Network (VPN) • Virus, Trojans and Worms • ServerManagement for Applications and Database • Disaster, Prevention andRecovery • Windows Network Administration • Linux Administration• Glossary • Objective Type Questions withAnswers • Index.

ByAdesh K. Pandey

COMPUTERGRAPHICS

CONTENTS

• Introduction to Graphic System • Scan Conversion and OutputPrimitives • Two Dimensional Transformation • Windowing andClipping Techniques • Three Dimensional Graphics • Projections(Perspective and Parallel) • Animation • Intractive Graphics • CorelDraw for Animation • Drawing and Anime Cartoon in Corel DrawSolved Questions • Practival Exercise • Glossary • Previous YearQuestion Papers • Index.

ByNaveen Kumari

Adesh K. Pandey

ByNaveen Kumari

DATACOMMUNICATIONAND NETWORKS



`

CONTENTS



`



`

• Introduction to Data Communication • Data and Signals • OSI andTCP/IP Model • Networking Basics • Modes of Data Transmission• Transmission Errors: Detection and Correction • Data Compressionand Encryption Techniques • Network Topologies, Switching, NetworkDevices • Introduction to LAN, MAN, WAN • Introduction to Modemand Modulation • Transmission Media • Frame Relay and CongestionControl • Multiplexing and Demultiplexing • Introduction toCommunication Standards and Equipments • Previous Year QuestionPapers • Index.



`By

Naveen Kumari

OPERATINGSYSTEMS

CONTENTS• Introduction to an Operating System • Operating System Structure• Brief Introduction to System Software • Brief Introduction to MS-DOS, Windows and Unix • Process Management • CPU Scheduling• Threads • Deadlocks • Memory Management • Virtual Memory• Input/Output Management • File system Management • DistributedOperating System • Linux Operating System • Case Studies : Unix,Linux, Windows andAndroid Systems.





`By

K. Vinoth Kumar

SYSTEM ANALYSISAND

DESIGN



`

CONTENTS

PROGRAMMINGIN C



`

• System Concepts • Overview of System Analysis and Design• Preliminary Investigations • Feasibility Study • RequirementSpecifications and Analysis • Detailed Design • Input/Output Design• System Development and Implementation • Testing and QualityAssurance • System Audit and Security • Object Oriented SystemModeling • Electronic Commerce • Glossary • Bibliography • ModelQuestion Papers • Examination Papers with Solutions • Index.

ByS.K. Jha


SOFTCOMPUTING

By

S.K. Jha

• Introduction • Soft Computing • Artificial Intelligence Problems andTechniques • Introduction to Neural Networks •Artificial Neural Model• Single Layer Feedforward Neural Networks • Multi-LayerFeedforward Neural Networks • Associative Memory Network• Counter Propagation Network •Hopfield Networks • AdaptiveResonance Theory • Classical and Fuzzy Sets • Fuzzy Logic SystemComponents • Neural Network Application • Genetic Algorithms• Neuro-Fuzzy Systems • FuzzyArithmetic • Fuzzy Logic • UncertaintyBased Information • References • Index.

Fundamentals of

COMPUTERAND

PROGRAMMINGin C

ByS.K. Jha



`

CONTENTSSection-A:An Overview of Computer Systems and Operating Systems

Section-B: Basic Introduction to System Software, ProgrammingConcepts and Computer Networks

Section-C :An Overview of C, Structure and Union in C

Section-D : Arrays, Functions, Pointers in C, Dynamic MemoryAllocation and File Management in C

• Introduction to Computer • Input/Output Devices • Radix Number Systems• Operating System Basics.

• Programming Language • Programming Concept • Internet Basics.

• C-Fundamentals • Operators and Expressions • Data Input-Output• Constants, Variables and Control Statements • Structures, Unions andPreprocessors.

• Arrays • Functions and Strings • Pointers • Dynamic Memory Allocation andFile Management in C • Appendices • Model Question Papers • B.E.Examination Solved Paper • Bibliography • Index.

CONTENTS• Algorithm and Programming Development • Programming Language• Cfundamentals • Program Structure • Operators and Expressions• Constants, Variables and Control Statements • Functions and Strings• Arrays • Pointers • Structure, Unions and Preprocessors • DataStructures and Dynamic Memory Allocations • Data File Operations•Appendices • Bibliography • Index.


PCORGANISATION

CONTENTS• Introduction to Computer Systems • Hardware Organization of PC• Interfacing Devices and Bus Standards & Architectures • The VideoDisplay of the PC • The Keyboard of the PC • Disk Drives • PeripheralDevices • Power Supplies • The BIOS and DOS Services • AdvancedMicroprocessors • Interface Standards • Introduction to RISC Processor• US Architecture & Multiprocessor Systems and Mini Computers• Previous Board Question Papers • Index.

By

Dr. S.K. Chauhan



`




`By

Vikas ChaudharyKanika Garg

CONTENTSCRYPTOGRAPHYAND

NETWORKSECURITY

• Introduction to Security • Classical Encryption Techniques • ModernBlock Ciphers • Symmetric Key Cryptography • Mathematics ofCryptography • Asymmetric Key Cryptography • MessageAuthentication and Hash Functions • Digital Signature • KeyManagement and Distribution • Authentication Applications and EmailSecurity • IP Security • Web Security • System Security • ExaminationPaper • Index.

LINUX ANDX-WINDOWS

PROGRAMMING



`

CONTENTSUnit-I

Unit-II

Unit-III

Unit-IV

Operating System and Networking on Linux

User Management and the Linux File System

Shell and Shell Scripting in Linux

Using the X-Windows System• Multiple Choice Questions • PreviousYear Question Papers • Index

BySanjay MalhotraJyotsna Malhotra

PC UPGRADINGMAINTENANCE

ANDTROUBLE SHOOTING

GUIDE

CONTENTS

ByS.K. Chauhan


Price:Third Edition: 2015

`

Releasing Shortly





`

By

Amit K. Mishra

JAVAPROGRAMMING



`

CONTENTS

COMPUTERCONCEPTS ANDPROGRAMMING

IN C



`

Unit I

Unit II

Unit III

Unit IV

Unit V

Unit VI

• Introduction to JAVA• Object Oriented Programming in JAVA.

• Abstract Window Toolkit • Event Handling in AWT • Applets• Introduction to Swing.

• Multithreading in JAVA• Exception Handling.

• Exploring JAVAInput/Output • JAVADatabase Connectivity.

• JAVANetworking • Remote Method Invocation.

• ProgrammingApproach •Appendices • Examination Papers • Index.

ByAmit K. Mishra

CONTENTSCOMPUTERSYSTEM AND

PROGRAMMINGIN C

By

Piyush Choudhary

Unit-I

Unit-II

Unit-III

Unit-IV

• Basics of Computer • Introduction to Operating System • NumberSystem • Basics of Programming.

• Fundamentals of C Programming • Data Types and Storage Classes• Operators and Expressions • Input and Output Operations.

• Conditional Program Execution • Program Loops and Iterations• Functions

• Arrays and Strings • Structure and Union Unit-V • Pointers • FileHandling • The Standard C Processors • Appendices • ExaminationPapers • Index.

COMPUTERORGANIZATION

ByVivek Keshari



`

CONTENTS

• Number Representation • Register Transfer Language • ArithmeticAlgorithms • Microoperations • Control Unit • Processor Organization• Memory Organization • Input-Output Organization • Appendices• Question Bank • Model Test Paper (Solved) • Previous YearExamination Papers • Index.

CONTENTSUnit-I:

Unit-II:

Unit III:

Unit-IV:

Unit-V:

• Introduction to Computer and Programming Language • NumberSystems and Conversion Methods.

• Overview of C • Data Types and Storage Classes • Operators andExpressions • Input and Output Operations.

• Conditional Program Execution • Program Loops and Iteration• Modular Programming.

• Arrays • Structures • Pointers • Dynamic Memory Allocation andLinked List.

• Searching and Sorting • The Standard C Preprocessor • TheStandard C Library • Appendices • Model Test Papers • Previous YearExamination Papers • Index.

Two Colours Edition



BASICCOMPUTER

ENGINEERING

CONTENTS

Unit I:

Unit II:

Unit III:

Unit IV:

Unit V:

• Computer System and Storage Devices.

• Operating System and Programming Languages.

• C++ Programming.

• Database Management System.

• Computer Networking •Appendices • Examination Papers • Index.

ByAmit K. Mishra

INTERNETAND

WEB DESIGNING

CONTENTS

• Internet Basics • Internet Connectivity • World Wide Web • InternetSecurity • Internet Applications • Websites Classification • DevelopingPortals Using HTML • Using Front Page • Client-Side Scripting: UsingJavascript • Server Side Scripting • Server-Side Programming UsingPHP • Active Server Page (ASP) • Flash • Practicals • ExaminationPapers • Index.

ByEr. Neha Dutta

Adesh K. Pandey

ByEr. Neha Dutta

COMPUTERPERIPHERALS

ANDINTERFACING



`



`



`



`

By

Bali-Bali

SOFTWAREENGINEERING

CONTENTS• Software Engineering • Software Life Cycle Models • RequirementEngineering • Verification and Validation • Software Design • SoftwareMeasurement and Metrices • Software Testing • Coding • SoftwareMaintenance • Re-Engineering • Software Cost • Software Risk• Software Reliability • Special Topics in Software Engineering• Objective Type Questions • Programms • Appendices • Previous YearQuestion Papers • Index.

CONTENTS

• Video Display • Hardware Organization of Pcs • Input Devices• Output Devices • Storage Devices • Power Supplies • The BIOS andDOS Services • Future Trends • PreviousYear Question Paper • Index.





` By

Sunil K. Pandey

Fundamentals of

SOFTWAREENGINEERING



`

CONTENTS

OBJECTORIENTED

PROGRAMMINGWITH C++



`

• Software Engineering • Software Life Cycle Models • SoftwareMeasurement and Metrices • Software Planning • Software Cost• Requirement Engineering • Software Design • Verification andValidation • Testing • Coding • Software Maintenance • ConfigurationManagement • Index.

BySunil K. PandeyRajesh Kochher

CONTENTSLEARN AUTOCAD(In Easy Way)

By

Bali & Bali

• Introduction to AutoCAD • Drawing Simple Objects • Basic Conceptof Drawing • Accuracy and Speed • Advanced Drawing Commands• Editing Object • Text and Unit • 3D Drawing–An Introduction• Internet Utilities.

THINKING INC++

BySunil K. Pandey



`

CONTENTSUnit-I: Procedural / Structured and OOP

Unit-II: Programming and Language

Unit-III: Object Oriented Programming

Unit-IV:Advanced C++

• Object Oriented Paradigm

• Introduction of C++ (with Brief Introduction of C) • Beginning withC++ Program (with Brief Description of C Program) • Control Flow •Function •Arrays and Strings • Structure and Unions • Preprocessor andManipulator.

• Classes and Objects • Constructor and Destructors • Inheritance• Operator Overloading • Pointer in C++ • Polymorphism, VirtualFunction and Friend Function • File and Stream.

• Templates and Exception Handling • Software Development Systems• Data Structure in C++ • Graphics in C++ •Appendices • Index.

CONTENTSUnit-I: Procedural / Structured and OOP

Unit-II: Programming and Language

Unit-III: Object Oriented Programming

Unit-IV:Advanced C++

• Object Oriented Paradigm

• Introduction of C++ (with Brief Introduction of C) • Beginning withC++ Program (with Brief Description of C Program) • Control Flow• Function • Arrays and Strings • Structure and Unions • Preprocessorand Manipulator.

• Classes and Objects • Constructor and Destructors • Inheritance• Operator Overloading • Pointer in C++ • Polymorphism, VirtualFunction and Friend Function • File and Stream.

• Templates and Exception Handling • Software Development Systems• Data Structure in C++ • Graphics in C++ •Appendices • Index.



Fundamentals of

COMPUTERPROGRAMMING

AND IT

CONTENTS

• Introduction to Computer • Operating System and WorkingKnowledge of Computer System • Problem Solving and ProgramPlanning • Overview of C++ with Operator and Expression • Beginningwith C++ • Control Structure • Function • Arrays and Strings • Conceptof Object Oriented Programming • Classes and Objects • Constructorand Destructors • Basics of File Handling • Sample Question Papers• Index.

BySunil K. Pandey

V.K. Jain

MULTIMEDIA(SYSTEM, TECHNOLOGY

& COMMUNICATION)

CONTENTS• Introduction • Multimedia and the Internet • Multimedia BuildingBlocks • Data Compression • Speech Compression, Synthesis andImages • Communication Protocols • Video Compression • ModelQuestion Paper • References • Notes • Index.

BySujata PandeyManoj Pandey



`



`



`

By

Nitin Upadhyay

THE DESIGNAND ANALYSIS

OFALGORITHMS

CONTENTS• Algorithm • Growth of Function • Analysing Algorithm ControlStructures • Recurrences • Quick Sort • Elementary Data Structure• Amortized Analysis • Heap • Sorting in Linear Time • Median andOrder Statistics • Searching and Advanced Search Trees • DynamicProgramming • Greedy Algorithms • Bracktracking • Branch andBound • Graphs • String Matching • Augmenting Data Structures • NPCompleteness • Polynomials and the FFT • Randomized Algorithms• Alzebraic Computation • Appendices • Previous Year Question Papers• Index.

COMPUTER SYSTEMARCHITECTURE

ANDORGANISATION



`By

Dr. S.P.S. SainiAnish Saini

CONTENTS• Key Concepts in Computer System Architecture and Organisation• Boolean Algebra and Combinational Digital Circuits • SequentialDigital Circuits • Multilevel View-Point and Operating System• Structured Computer Organisation and Performance Parameters• Instruction Set Architecture (ISA) • 8086/88 CPU Organisation• Assembly Programming Develoopment Tools for 8086 CPU • BasicNon- Pipelined CPU Architecture • Memory Hierarchy • Input/OutputFundamentals and Techniques • Pipelined and Parallel Processors• 80*86 Instruction Code and Timing Diagrams • Microprogrammingand Control Memory • Appendix: 8086-Instruction Set • Tutrials andAssignments • Examination Papers • References • Index.





`

By

Sanjay Sharma

Question Bank in

COMPUTERSCIENCE



`

CONTENTS

Elements of

COMPUTERNETWORKS



`

• Introduction to Computers • Computer Architecture and Organization• Data Communication and Networking • Operating System Concepts• Database Management System (DBMS) • Principles of ProgrammingLanguages and System Software • Programming Language and C/C++• Artificial Intelligence • System and Program DevelopmentMethodology • Statistical Techniques in Computer Science • DigitalElectronic Concepts • Introduction to JAVA • MathematicalPreliminaries • Computer Graphics Principles • Automata Theory andCompiler Design • Data Structures and Algorithms • SoftwareEngineering Principles • Internet and World Wide Web • Model Paperfor GATE 2014 with Solutions.

BySanjay Sharma

CONTENTSCOMPUTERNETWORKS

By

Pankaj SharmaNitin Upadhyay

R. BalagurswamyM. Ramaswamy

• Introduction to Computer Network • The Physical Layer • The DataLink Layer • The Medium Access Sublayer • The Network Layer • TheTransport Layer • The Application Layer • Model Question Paper• PreviousYear Question Papers • Index.

COMPUTERNETWORKS

ByDr. Sanjay Sharma



`

CONTENTS

Unit-I

Unit-II

Unit-III

Unit-IV

Unit-V

• OSI Reference Model and Network Architecture • Introduction toPhysical Layer.

• Data Link Layer and Protocols • MediumAccess Sublayer.

• Network Layer.

• Transport Layer, Session Layer and Presentation Layer.

• Application Layer • World Wide Web • Example of Networks• PreviousYear Question Papers • Index.

CONTENTS

Unit-I

Unit-II

Unit-III

Unit-IV

Unit-V

• OSI Reference Model and Network Architecture • Examples ofNetworks • Data Transmission and Physical Layer.

• TCP/IP•Application Layer Services • World Wide Web (www).

• LocalArea Networks • LAN Interconnecting Devices.

• WideArea Networks (WANs).

• Introduction to Network Management • Previous Years QuestionPapers • Index.



A Course in

COMPUTERNETWORKS

CONTENTS

• OSI Reference Model and Network Architecture • Example ofNetworks • Data Transmission and Physical Layer • SwitchingTechniques • Data Link Layer and Protocols • MediumAccess Sublayer• SONET/SDH •Asynchronous Transfer Mode (ATM) • Network Layer• Network Hardware Components • Transport Layer, Session Layer andPresentation Layer • Application Layer Service • Network Security andMultimedia • World Wide Web (WWW) • Model Question Papers• Index.

ByDr. Sanjay Sharma

MOBILECOMPUTING

CONTENTS• Introduction to Mobile Computing • Frequency Management andChannel Assignment • Handoffs and Dropped Calls • Medium AccessControl • Global System for Mobile Communication (GSM) • GeneralPacket Radio Services (GPRS) • Third Generation (3G) MobileServices • Wireless Local Loop (WLL) • Mobile Data Communication• Wireless Application Protocol (WAP) • Wireless ATM • MobileNetwork Layer • Mobile Transport Layer • Global Mobile SatelliteSystems • Wireless Enterprise Networks • Adhoc Networks • ModelQuestion Paper • Index.

ByDr. Sanjay Sharma



`



`



`

By

Dr. Sanjay Sharma

Principles of

COMPUTERNETWORKS

CONTENTS

Unit-I

Unit-II

Unit-III

Unit-IV

Unit-V

• Introduction.

• Network Protocols.

• Congestion Control in Data Networks.

• RoutingAlgorithms.

• Internetwork Protocols •Appendix • Model Question Paper • Index.

Introduction to

COMPUTERNETWORKS



`

BySanjay Sharma

CONTENTS

Unit-I :

Unit-II :

Unit-III :

Unit-IV :

Unit-V :

• Introduction to Computer Networks • Queuing Theory.

• Data Link Layer.

• MediumAccess Sublayer • Network Hardware Components.

• Network Layer.

• Examples of Networks • Glossary • Index.



ADVANCEDCOMPUTERNETWORKS



`

CONTENTS

COMPUTERNETWORKS-II



`

Unit-I

Unit-II

Unit-III

Unit-IV

• Introduction • Review of Physcial Layer • Review of Data Link Layer.

• Network Layer.

• Transport Layer.

• Application Layer • World Wide Web (www) • Network Security.Glossary • Model Question Paper for Practice • PreviousYears QuestionPapers • Index.

ByDr. Sanjay Sharma

ByDr. Sanjay Sharma

COMPUTERNETWORKS-I

ByDr. Sanjay Sharma



`

CONTENTS

Part-A

Part-B

• Introduction to Computer Networks • Physical Layer • Data LinkLayer • MediumAccess Sublayer.

• Network Layer • Transport Layer • Application Layer • World WideWeb (WWW) • Model Question Papers • Index.

CONTENTS

• Network Security • Internet Key Exchange (IKE) • Adhoc Networks• Wireless Communication Systems • 3G Wireless Networks • WirelessSystem Design-I: Elements of Cellular Radio System Design • WirelessSystem Design- II: Interference and System Capacity • Wireless SystemDesign-III: Cell Coverage for Signal and Traffic • Wireless SystemDesign-IV: Frequency Management and Channel AssignmentStrategies • Wireless System Design- V: Handoffs Strategies andDropped Calls • Model Question Paper • Index.



`By

Dr. Sanjay Sharma

Essentials of

COMPUTERNETWORKS?

CONTENTS

• Computer Networks • Example Networks • The Physical Layer • TheData Link Layer • The Medium Access Control Layer • WirelessProtocols • The Network Layer • The Transport Layer • TheApplication Layer • PreviousYear Question Paper • Index.


Introduction to

WEBTECHNOLOGY

CONTENTS• Introduction and Web Development Strategies • HTML (HypertextMarkup Language) • Cascaded Style Sheet (CSS) • XML (ExtensibleMarkup Language) • Javascript and AJAX • RMI and VBScript • CGIand PERL • ASP and ASP.NET (Active Server Page) • JSP (Java ServerPages) • JSP Directives, Standard Actions and COM/DCOM • PHP(Hypertext Preprocessor) • JAVA Beans • Servlet • JDBC (JavaDatabase Connectivity) • Appendices • Model Question Papers• PreviousYear Questions Papers (Solved) • Index.

ByPankaj Sharma



`



`By

Pankaj Sharma

ARTIFICIALINTELLIGENCE

CONTENTS

• Introduction to Artificial Intelligence • Introduction to SearchAlgorithms • Knowledge Representation and Reasoning • MachineLearning • Pattern Recognition • Classification Techniques• Introduction to Prolog and LISP • Glossary • Appendices • ModelQuestion Papers • PreviousYear Question Papers • Index.

Fundamentals of

WEBTECHNOLOGY



`

CONTENTS

• Internet Principles and Components • HTML (Hypertext MarkupLanguage) • ascaded Style Sheet (CSS) • XML Document TypeDefinition • Dynamic HTML with Javascript • Web Services • WebService Architecture • AJAX (Asynchronous Javascript and XML)• Distributed Object Based Systems • Web 2.0 • Ruby on Rails • Web 3.0• Lab Guide • Model Question Paper • Index.

ByPankaj Sharma

ByEr. Rachit Garg

MULTIMEDIA



`

CONTENTS

• Multimedia Overview • Image • Audio • Video • MultimediaCommunication and Connections • Animation and 3D Graphics • WebInternet • Working with MS Paint • Working with Dreamweaver• Virtual Reality • Question Bank • Previous Year Question Papers• Model Test Papers • Index.




PATTERNRECOGNITION



`

CONTENTS

WEBENGINEERING



`

• Introduction to Pattern Recognition • Mathematical Foundation• Mathematical Foundation (Part 2) (Probability and Statistics)• Statistical Pattern Recognition • Parameter Estimation Methods• Non-parametric Techniques • Unsupervised Learning and Clustering• Matlab Manual • Glossary • Model Questions • Previous YearQuestion Papers • Index.

ByPankaj Sharma

ByPankaj Sharma

CONTENTS

• Web Engineering • World Wide Web • Information Architecture• Creating Cohesive Websites • Web Security and RequirementEngineering • HTML Hypertext Markup Language) • Cascaded StyleSheet • CGI, Perl • Java Script • PHP (Hypertext Preprocessor) AJAX(Asynchronous Javscript and XML) and Asp.Net • ASP (Active ServerPage) • XML(Extensible Markup Language) • E Commerce •Appendix• Model Question Papers • Index.



`

By

Pankaj Sharma

WEBENGINEERING

CONTENTS

• Information Architecture • Creating Cohesive Websites • HTML(Hypertext Markup Language) • Style Sheets • Working of Core Events(Block Level Events, Text Level Events) Using JAVAScript • JSP(JAVA Server Pages) • ASP (Active Server Page) • Overview ofAdvance Features of XML•Appendix • Model Question Paper • Index.

INFORMATIONSECURITY ANDCYBER LAWS

CONTENTS

• Introduction to Information Systems • Application Security and DataSecurity • Security Threats • E-Commerce and Security Threats toEcommerce • Digital Signature and Public Key Cryptography• Developing Secure Information Systems • Security Policies• Information Security Standards-ISO • Model Question Papers • Index.

ByPankaj Sharma



`



INFORMATIONSECURITY ANDCYBER LAWS



`

CONTENTS

INFORMATIONSTORAGE &

MANAGEMENT



`

• Introduction to Information System • Information System Threats andAttacks • Introduction to E-Commerce • Introduction to InformationSecurity and Biometrics • Model of Cryptographic Systems • NetworkSecurity • Security Metrices: Classification and Their Benefits•Appendices • PreviousYear Question Paper (Solved) • Index.

ByPankaj Sharma

ByPankaj Sharma

SYSTEMPROGRAMMING

AND SYSTEMADMINISTRATION

ByPankaj Sharma



`

CONTENTS• Evolution of Components System Programming • Compiler andCompilation Process • Macro Language and Macro Processor• Theoretical Concept of Unix Operating System • Getting Started withUnix • Text Manipulation • Shell Programming • SystemAdministration • Shell Prompt and Command Library•Appendices • Index.

CONTENTS

• Introduction to Storage Technologies • Storage Systems Architecture• Raid Levels and Parity Algorithms • Introduction to NetworkedStorage • Hybrid Storage Solutions • StandardApplications Frameworkfor EPICS • Key Management Metrics (Thresholds, Availability,Capacity, Security and Performance) • Information Storage on Cloud• Index.



`By

Pankaj Sharma

INFORMATIONSECURITY

CONTENTS

• Introduction to Information Security • Elementary Cryptography• DES (Data Encryption Standard) • AES (Advanced EncryptionStandard) • Public Key Encryption and Uses of Encryption • ProgramSecurity and Viruses • Operating System Security • Database Security• Network Security • Administring Security and Ethical Issues • ModelQuestion Paper • Index.



WEBDEVELOPMENT

CONTENTS

• Introduction to JAVA • Class, Object and Methods in JAVA • Arrays,Inheritance and Polymorphism • Threads, Packages and Interfaces• Exceptions Handling, IO Applets, Generic and Collections• Introduction to Internet (World Wide Web) • HTML (HypertextMarkup Languages) • Separating Style from Structure with Style Sheet •XML (Extensible Markup Language) • Client Side Programming(Javascript) • Introduction to Server Side Technologies: CGI an PERL• Introduction to Server Side Technologies: ASP (Active Server Page)• Introduction to Server Side Technologies: JSP (JAVA Server Pages)•Appendices • Glossary • Index.

ByPankaj Sharma

CLOUDCOMPUTING

CONTENTS• Introduction to Cloud Computing • Cloud Computing Architecture• Scalability and Fault Tolerance • Cloud Management andVirtualization Technology • Virtualization: Fundamental Concepts ofCompute Storage • Cloud Security • Cloud Computing SecurityArchitecture • Market Based Management of Clouds • Hadoop • MapReduce • Experiments •Appendix • Model Question Papers Index.

ByPankaj Sharma

ByPankaj Sharma

RAPID APPLICATIONDEVELOPMENT

USINGVISUAL BASIC AND

VISUAL C++



`

CONTENTS



`



`

• Introduction to Windows Programming • Parts of Visual C++ Program• Event Oriented Window Programming and Device Context• Working with Keyboard and Mouse • Control and Dialogs• Serialisation and File Handling • Win32 Static DLL • DatabaseConnectivity •Appendices • Index.



`By

Pankaj Sharma

CONTENTSPARALLELALGORITHMS • Introduction to Parallel Algorithm • Parallel Computational Models

• Performance Measures of Parallel Algorithms • Parallel SortingNetwork • Parallel SearchingAlgorithms • Root Findings of Linear andNon-linear Equations • Graph Searching Algorithm • CombinatorialAlgorithm for Permutation, Combinations and Derangements•Appendices • PreviousYear Question Paper • Index.





` By

Lalit K. AroraAnkit Gupta

MANET ANDHIGH SPEEDNETWORKS



`

CONTENTS

Basics of

MODELLINGAND

SIMULATION



`

CONTENTS• System • System Modelling • System Simulation • Probability andRandom Number Generators • Discrete and Continuous Distributions• Input Modelling • Output Analysis of Simulations • Simulation ofContinuous System • Simulation of Discrete Systems • Simulation ofQueuing System • Comparison and Evaluation of Alternative SystemDesign • System Dynamics • Simulation of Networked ComputerSystem • Design and Evaluation of Simulation Experiments• Simulation Language and Software •Appendices • Index.

• AD-HOC Wireless Networks • AD-HOC Wireless Media AccessProtocols • Overview ofAD-HOC Routing Protocols • CommunicationPerformance of AD HOC Networks • Energy Conservation and PowerLife Issues • High Speed Networks Frame Relays • AsynchronousTransfer Mode (ATM) • Fast Ethernet and Fiber Channel WirelessLANS • Simulation Software (NS2.34 and Bonmotion 1.4) • Simulation•Appendix • Index.

ByLari & Singh

CONTENTS.NET FRAMEWORKWITH C#

PROGRAMMING

By

Pankaj Sharma

Unit-I: The .NET Framework:

Unit-II: C-Sharp Language ©

Unit-III: C-# Using Libraries

Unit-IV:Advance Features

Unit-V:Advance Features

• Microsoft .Net Technology • .Net Framework,

• C# Basics • Programming in C# • Arrays, Strings and More • ObjectOriented Programming •Additional Concepts.

• System Namespaces • WindowsApplications • Common Controls.

• Asp.Net • Web Form and Control • Ado.Net • Window and WebServices •AdvancedApplications.

•Assemblies • Generics •Attributes •Appendices • Index.



`

By

Pankaj Sharma

EXPERTSYSTEMS

CONTENTS• Introduction • Domain Exploration and Knowledge Elication• Learning Planning and Explanation in Expert System • Introduction toImplementation Tools: Prolog and LISP • Natural Language Processingand Understanding in Expert Systems • Search Algorithms in ExpertSystems • Knowledge Representation and Reasoning • Glossary• Model Paper • PreviousYear Question Papers • Index.



OBJECT ORIENTEDSYSTEMSWITH C++

CONTENTS

Part-I: Object-Oriented Modeling & Design

Part-II: Programming in C++

• Introduction • Object Modeling Technique (OMT) • Object Modeling• Advance Concepts of Object Modeling • Dynamic Modeling• Functional Modeling • OMT Methodology.

• Introduction of C++ • Basic Programming Concepts • Object OrientedProgramming Concepts • Inheritance • Polymorphism • Files• Templates and Exceptions Handling • Appendices • References• Index.

ByDr. Lalit K. Arora

OBJECT ORIENTEDSYSTEM

WITH JAVA

CONTENTSPart-I: Object-Oriented Modeling & Design

Part-II: JAVAProgramming

• Introduction • Object Modeling Technique (OMT) • Object Modeling• Advance Concepts of Object Modeling • Dynamic Modeling• Functional Modeling • OMT Methodology.

• Introduction to JAVA • Beginning with JAVA Programs • Basic JavaPrograms • Methods and Classes • Inheritance, Packages & Interfaces• Advance Programming Concepts • HTML and JAVA Applet • JAVALibrary • JAVAAWT • Event Handling • Software Development usingJava • JDBC • Internet • Appendices • Bibliography • Previous YearQuestion Papers • Index.

ByLalit Arora

By

Dr. Lalit K. AroraDr. Raj KumarDr. Anjali Arora

Concepts of

PROGRAMMINGAND OOPs



`

CONTENTS



`



`

• Utilization • Programming Features • Applications • Introduction to CLanguage • Software Development Methodologies • Object OrientedConcepts • Database Management System • Structure Query Language(SQL) • Bibliography • Model Question Paper • Previous Year QuestionPaper • Index.



`By

Lalit AroraAnjali Arora

CONTENTSC# USINGDOT NET

FRAMEWORK

Part-I: The .Net Basics

Part II: C# Basics

Part III:ASP.Net

Part-IV: Visual C# (WindowsApplications)

Part-V:Ado .Net (Data Base Handling)

Part-VI:Advance Features

• Introduction to .Net • Visual Studio .Net.

• Introduction to C# • Programming in C# • Methods and Variables• Object Oriented Programming •Additional Concepts.

• Overview of ASP .Net • Developing Web Applications • StandardControls • Validation and Login Controls.

• WindowsApplications • Common Controls.

•Ado .Net.

•Advance Features • Experiments • Index.





`By

Dr. Lalit K. AroraAnjali Arora

OBJECT ORIENTEDPROGRAMMING

USING C++

Size : 20 × 30/8Pages : 300 Approx.ISBN: 978-93-5014-029-1


`

CONTENTS

OBJECT ORIENTEDTECHNIQUES

(With JAVA)



`

CONTENTS• Introduction • Modeling • UML • Basic Structural Modeling • BasicBehavioural Modeling • Architectural Modeling • OMT Methodology• Introduction to Java • Beginning with Java Programs • Methods andClasses • Inheritance, Packages and Interfaces • Advance ProgrammingConcept • HTML and JAVA Applet • Java Library • Java AWT • EventHandling • Software Development Using Java • JDBC • Bibliography• Appendices • Model Question Papers • Previous Year Question Papers• Index.

• Introduction to C++ • Object Oriented Concept • Classes and DataAbstraction • Operator Overloading • Inheritance • Polymorphism• Files and Input/Output Streams • Templates and Exception Handling• C++ Programming Lab •Appendices • Index.

By

Lalit K. AroraRaj Kumar Bhatia

CONTENTSCOMPUTERORGANIZATION &ARCHITECTURE

By

Lalit K. Arora

Dr. Vikesh Kumar

• Basics of Computer Organization and Architecture • DataRepresentation in Computer System • Computer Arithmetic • BooleanAlgebra and Digital Logic • Register Transfer Logic • ProcessorOrganization • Computer Instructions Set Architecture • MemoryOrganization • Input and Output Organization • Assembly Language• Pipelining • Objective Type Questions • Model Question Papers• References • Index.

JAVAPROGRAMMING

ANDWEBSITE DESIGN

ByLalit K. Arora



`

• Introduction • Beginning with Java Programs • Basic Java Programs• Method and Classes • Inheritance, Packages and Interfaces • AdvanceProgramming Concept • I/O Programming and Networking • JavaAWT• Event Handling • Advanced Concepts of Java • Website Designing•Appendices • PreviousYear Question Papers • Index.

CONTENTS



COMPUTERGRAPHICS

CONTENTS

• Introduction to Computer Graphics • Graphics Primitives • Images• Mathematics for Computer Graphics • Scan Conversion • Polygons• Segments • 2-D Transformation • Windows and Clipping • 3-DTransformation • Three Dimensional Projections • Interaction • HiddenLines and Surfaces • Introduction to Curve Generation • Rendering andIllumination • Colour Models • Graphic Programming Using OpenGL• Animation • Graphical Kernal System (GKS) • Lab Programs• PreviousYears Questions Papers • Index.

ByUdit Agrawal

DATA STRUCTURESUSING C

CONTENTS• Introduction to Data Structures • Essentials of C Language• Introduction to Arrays and Matrices • Linked List • Stacks • TheQueues • Recursion • Trees • Binary Search Tree • AVL Tree • B-Treeand Its Variants • Graphs • Sorting Techniques • Searching and HashingTechniques • Storage Management • Previous Year Question Papers• Index.

ByUdit Agrawal

ByUdit Agrawal

SOFTWAREENGINEERING



`

CONTENTS



`



`

• Software and Software Engineering • Software Development LineCycle Models • Software Reliability and Quality Assurance • SoftwareDevelopment Methodology • Software Project Management • SoftwareDesign • Software Measurement and Metrics • Coding and Testing• Software Maintenance • Software Re-Engineering and ReserveEngineering • Computer Aided Software Engineering • ImportantQuestions with Answers • Glossary • Previous Year Question Papers• Bibliography • Index.



`

By

Udit Agarwal


COMPUTERGRAPHICS

• Introduction to Computer Graphics • Graphics Primitives• Introduction to Images • Scan Conversion • Polygons • 2-DTransformation • Windows and Clipping • 3-D Transformation • ThreeDimensional Projections • Hidden Lines and Surfaces • Introduction toCurve Generation • Rendering and Illumination • Index.





`

By

Udit Agarwal

DISTRIBUTEDSYSTEMS



`

CONTENTS

DATASTRUCTURES



`

CONTENTSPart-A

Part-B

• Dynamic Memory Management • Introduction to Data Structures• Introduction to Arrays and Matrices • Linked List • Stacks • TheQueues.

• Recursion • Trees • Binary Search Tree • AVL Tree • B-Treeand Its Variants • Graphs • Sorting Techniques • Searching and HashingTechniques • Index.

• Characterization of Distributed Systems • System Models• Theoretical Foundation for Distributed System • Distributed MutualExclusion • Distributed Scheduling • Deadlock Detection in DistributedSystems • Agreement Protocols • Interprocess Communication• Distributed Objects and Remote Invocation • Security in DistributedSystems • Distributed File Systems • Distributed Shared Memory• Failure Recovery in Distributed System • Fault Tolerance inDistributed Systems • Transactions and Concurrency Control• Distributed Transactions • Replication • Important Questions withAnswers • Bibliography • PreviousYear Question Papers • Index.

ByUdit Agarwal

CONTENTSDATA MININGAND DATA

WAREHOUSING

ByUdit Agarwal

• Introduction to Data Mining • Data Preprocessing • Data Reduction• Concept Description in Data Mining • Association Rules• Classification and Predictions • Artificial Neural Networks • GeneticAlgorithm Support to Data Mining • Clustering Analysis • Multimediaand Web Data Mining • Introduction to Data Warehousing • OLAPTechnology • Client Server Computing • Designing a Data Warehouse• Data Mining Interface and Security • Glossary • Solved Questions withAnswers • Examination Papers • Index.

DISTRIBUTEDCOMPUTING

ByUdit Agarwal



`

Unit-1

Unit-2

Unit-3

Unit-4

Unit-5

• Characterization of Distributed Systems • System Models • TheoreticalFoundation for Distributed System.

•Distributed Mutual Exclusion • Deadlock Detection in Distributed Systems•Agreement Protocols.

• Interprocess Communication • Distributed Objects and Remote Invocation• Distributed File Systems.

• Transactions and Concurrency Control • Distributed Transactions• Replication.

• Introduction to Grid Computing • Introduction to Cloud Computing • ImportantQuestions withAnswers • Model Test Papers • Bibliography • Index.

CONTENTS



OPERATINGSYSTEMS

CONTENTS

• Overview of Operating Systems • Operating System Structure• Process Management • CPU Scheduling • Process Synchronizationand Interprocess Communication • Deadlocks • Memory Management• Virutal Memory • Input/Output Management and Disk Scheduling• File System Management • Protection and Security • Case Studies:Linux and Windows NT • Introduction to Distributed Systems• Distributed File System • Previous Year Examination By Papers• Index.

ByVijay Shukla

Concepts of

DATA STRUCTUREUSING C

CONTENTS• Data Structure • Understanding Complexity • Array • Stack • Queue• Recursion • Linked List • Tree • Searching • Hashing • BST and AVLTree • Multiway Search Tree • Sorting • Graph • File Organization• Selected Programmes • Objective Type Questions • ExaminationPaper • Index.

ByR.R.K. Tripathi

ByShiva Sharma

A Glimpse into

CLIENT/SERVERCOMPUTING



`

CONTENTS



`



`

Unit-I :

Unit-II :

Unit-III :

Unit-IV :

Unit-V :

• Client/Server Computing: An Overview • Downsizing andClient/Server Computing.

• The Backbone of the Client/ServerApplication.

• The Connectivity.

• Developing Client/Server System.

• Client/Server System Development: Training and Support• Client/Server System: Database, Database Tools and Implementationof Synchronization • Appendix: Case Studies • Model Test Papers• Solved Examination Paper • Previous Year Examination Papers• Index.



`By

Dr. Sachin KumarKadambri Agarwal

CONTENTSDATA MINING ANDDATA

WAREHOUSING

Unit-I:

Unit-II:

Unit-III:

Unit-IV:

• Need of Data Warehouse • Data Warehouse Building Blocks• DimensionalAnalysis.

• Principles of Dimensional Modeling.

• Dimensional Modeling.

• Data Mining • Data Mining Techniques • Data Mining Models andApplications • Multimedia Data Mining • Few Important Difference• Testing Data Warehouse • Appendices • Questions with Answers• Glossary • Examination Papers • Index.





` ByDr. Sachin KumarKadambri Agarwal

NETWORKPROGRAMMING



`

CONTENTS

NETWORKTECHNOLOGY



`

CONTENTSUnit-I:

Unit-II:

Unit-III:

Unit-IV:

• Network Technology • Internet Searching Tools.

• Slip (Serial Line Internet Protocol)/PPP (Point to Point Protocol)• Transport Layer Issues • Network Security.

• Review of Lan • Serial Communication • Inter Networking andRouting.

• USART • ISDN (Integrated Service Digital Network) • Flow ControlError Correction and Detection • Inter Networking and SerialCommunication • Appendix • Multiple Choice Type Questions• Examination Paper • Index.

Unit-I :

Unit-II :

Unit-III :

Unit-IV :

Unit-V :

• Introduction to Networking • TCP/IP Protocol Architecture • IPDatagram Format.

• Socket Introduction • ECHO Service.

• Algorithms and Issues in Server Software Design.

• Remote Procedure Call Concept • RPC Authentication.

• NFS (Network File System) • Appendix • Previous YearExamination Papers • Index.

By


CONTENTSSYSTEMS &NETWORK

ADMINISTRATION

By

Dr. Sachin Kumar

Kadambri Agarwal

Unit-I

Unit-II

Unit-III

Unit-IV

• An Introduction to System Administration • Host Management• Superuser.

• Network Administration • VLAN (Virtual Local Area Network)• Configuring Server.

• Host and Network Security • Scripting Tools.

• Categories of Security • Appendices • Examination Papers (Solved)• Examination Papers (Unsolved) • Index.

PROGRAMMINGLANGUAGES

By




`

SectionA: Introduction

Section B: Structured Data Objects, Subprograms andProgrammerDefined Data Type Structured Data Types

Section C: Sequence Control and Data Control

Section D: Storage Management and Programming Languages

• Introduction to Programming Languages • Programming LanguageProcessors • Elementary Data Type.

• Subprograms and Programmer Defined Data Types.

• Sequence Control • Data Control.

• Storage Management • Programming Languages • Operating andProgramming Environment for Programming Language • Comparisonin Various Languages • Appendices • Solved Examination Papers• Index.

CONTENTS



Principles of

PROGRAMMINGLANGUAGES

CONTENTSUnit-I

Unit-II

Unit-III

Unit-IV

• Introduction to Programming Languages • Programming LanguageProcessor.

• Elementary Data Type • Structured Data Type • Subprograms andProgrammer Defined Data Type • Sequence Control.

• Data Control Referencing Environment • Storage Management.

• Syntax and Translation • Introduction to Functional Programming• Comparison in Various Languages •Appendices • Examination Papers• Index.

ByDr. Sachin KumarKadambri Agarwal

NETWORKSECURITY

CONTENTS• Network Security • Codes and Ciphers • Stream Ciphers • BlockCiphers • Public Key Cryptosystems • Kerberos • System Identificationand Clustering • Security : Hash Functions-Authentications• Telecommunication Network Architecture • Previous Year UnsolvedQuestion Papers • PreviousYears Solved Question Papers • Index.

ByNeha Ghai

ByNeha Ghai

MANAGEMENTINFORMATION

SYSTEM



`

CONTENTS



`



`

SectionA

Section B

Section C

Section D

• Introduction to Information Systems • Introduction to ManagementInformation Systems • Management Information System and the SystemApproach • Manager Overview • Information Technology.

• Conceptual System Design.

• Detailed System Design.

• Implementation of Management Information System • Evaluation, Controland Maintenance of Management Information Systems • Pitfalls inManagement nformation System • Enterprise Resource Planning • SupplyChain Management • Customer Relationship Management • ProcurementManagement System • Previous Year Question Papers (Unsolved)• PreviousYear Question Papers Solved) • Index.



`By

Amrita Jyoti

CONTENTSDATACOMPRESSION • Introduction • Mathematical Preliminaries for Lossless Compression

• Huffman Coding • Arithmetic Coding • Dictionary Techniques• Context Based Compression • Lossless Image Compression• Mathematical Preliminaries for Lossy Coding • Scalar Quantization• Vector Quantization • Speech and Video Compression • Glossary• Model Question Papers • PreviousYear Question Papers • Index.





`

By

Biswajit R. Bhowmik

GRAPHTHEORY



`

CONTENTS

ADVANCEDMOBILE

COMPUTING



`

CONTENTSUnit-I :

Unit-II :

Unit-III :

Unit-IV :

• Introduction

• Mobile Data Communications

• Third Generation (3G)

• Global Mobile Satellite Systems• Model Test Papers (Solved) • Previous Year Examination Papers(Solved) • PreviousYear Examination Papers (Unsolved) • Index.

Graphs • Euler and Hamiltonian Graphs • Tree • Cut Sets and NetworkFlow • Planar Graphs • Vector Spaces of a Graph • MatrixRepresentation of Graphs • Colouring of Graphs • Enumeration ofGraphs • Directed Graphs • PreviousYear Question Papers • Index.

ByVishnu Sharma

CONTENTSDESIGN ANDANALYSIS OFALGORITHMS

ByK. Patrai

• Introduction to Algorithms • Asymptotic Notations • Recursion VSRecurrence • Divide and Conquer Paradigm • Dynamic Programming• Greedy Approach • Backtracking • Branch and Bound • Lower BoundTheory • Disjoint Set Manipulation • Graph Traversals • MatrixManipulation Algorithms • Notion of NP-Completeness• Approximation Algorithms • Large Integers Multiplication • FileCompression • Biconnectivity • Strongly Connected Components• Topological Sorting • Dijkstra’s Algorithm • Gate Questions • ModelQuestion Papers • Previous Years Examination Papers (Solved)• Bibliography • Index.

MOBILECOMPUTING

By

Vishnu SharmaS.P.S. Chauhan



`

Unit-I :

Unit-II :

Unit-III :

Unit-IV :

Unit-V :

• Introduction • Spread Spectrum • Overview of Wireless LAN.

• Data Replication for Mobile Computer • The CODA Distributed FileSystem • WirelessApplication Protocol.

• Data Managements in Mobile Computing.

• Data and Transaction Management in a Mobile Environment • MobileAgent Computing.

• Routing Protocols for Adhoc wireless Networks • Model QuestionPaper based on Previous Examination Paper • Examination Papers(Solved) • Examination Papers (Unsolved) • Index.

CONTENTS



Fundamentals of

DISTRIBUTEDOPERATING

SYSTEMS

CONTENTS

• Operating System Review • Distributed Operating System • ClockSynchronization and Distributed Mutual Exclusion • Distributed FileSystem and Scheduling • Distributed Shared Memory • Case Studies•Appendices • Index.

ByShubhra Garg

INTERNETFUNDAMENTALSAND CONCEPTS

CONTENTS• Electronic Mail • Network and Internet • World Wide Web • HTML•JAVASCRIPT • XML • Web Servers • Privacy and Network Security•Appendices • Index.

ByShubhra Garg

ByAnita Sengar

ITINFRASTRUCTURE

MANAGEMENT



`

CONTENTS



`



`

• Information Technology • Infrastructure Management Overview• Preparing for Infrastructure Managment • Service Delivery Processes• Service Support Processes • Storage and Security Management• Information Technology Ethics • Emerging Trends inInformationTechnology • Appendix-A: Important Abbreviations Usedin the Book • Appendix-B: Common ITIL Terms • Examination Papers• Index.



`By

Er. Rishabh Anand

CONTENTSSOFTWAREPROJECT

MANAGEMENT

• Introduction to Software Project Management • Step-wise ProjectPlanning • Project Evaluation and Estimation • Activity Planning • RiskManagement • Resource Allocation • Monitoring and Control• Managing Contracts and People • Software Quality • Study of anySPM Software—Project 2000 or Equivalent • Appendices • FrequentlyAsked Questions • Viva Voce Questions • Model Test Papers forPractice • Examination Papers • Index.





`

By

Gajendra Sharma

Principles of

SOFTWAREPROJECT

MANAGEMENT



`

CONTENTS

NETWORKMANAGEMENT



`

CONTENTS• Overview of Network Management • Management Information Base(MIB) • OSI, ARP and RARP • Delivery and Routing of IP Packets,Internet- Working and Virtual Private Networks • ICMP, IGMP, TCPAND SMTP• Question Bank • Model Question Papers • References andSuggested Readings • Index.

• Introduction to Software Project Management • Step Wise ProjectPlanning • Project Evaluation and Estimation • Activity Planning • RiskManagement • Resource Allocation • Project Monitoring and Control• Managing Contracts and People • Software Quality • ProjectExecution and Closure • Project Management Tools • Appendices• Model Test Papers for Practice • Examination Papers • Index.

ByRishabh Anand

CONTENTSCOMPILERDESIGN

ByEr. Rishabh Anand

• Introduction to Compiler • Programming Language • LexicalAnalysis• Grammar • Basic Parsing Techniques • Top-Down Parsing • LRParsers • Syntax Directed Translation • Symbol Tables • StorageManagement • Error Handling • Code Optimization • Data FlowAnalysis • Code Generation • Programs • University Papers • Index.

WIRELESS &MOBILE

COMPUTING

ByRishabh Anand



`

• Wireless Transmission • Telecommunication Networks • Wireless Lan• Mobile Network, Transport and Application Layer • System Security•Question Bank • Model Question Papers for Practice • ExaminationQuestion Paper • Index.

CONTENTS



DATA MINING,DATA

WAREHOUSINGAND OLAP

CONTENTS

Unit-I:

Unit-II:

Unit-III:

Unit-IV:

Unit-V:

Unit-VI:

• Data Mining • Data Processing • Data Reduction.

• Data Mining Statistics •Association Rules.

• Classification • Decision Trees • Bayesian Classification • Artificial NeuralNetworks • GeneticAlgorithm • Clustering.

• Introduction to Data Warehousing • Data Warehousing : Concepts and Mechanisms •Building a Data Warehouse • Client Server Computing • Distributed and ParallelProcessing • Mapping Data Warehouse to a MultiprocessorArchitecture.

•Aggregation • OLAP• Business CompetitiveAnalysis • Security.

Advance Datamining • Web Mining • Visual Web Data Mining • Temporal and SpatialData Mining •Appendices • References • Examination Paper • Index.By

Gajendra Sharma

DISTRIBUTEDSYSTEMS

CONTENTS• Characterization of Distributed Systems • System Model • TheoreticalFoundation for Distributed System • Distributed Mututal Exclusion• Distributed Deadlock Detection • Agreement Protocol • DistributedObject and Remote Invocation • Security in Distributed System• Distributed File System • Transactions and Concurrency Control• Replication • Distributed Algorithm • Corba Case Study • ObjectiveType Questions • PreviousYear Question Papers • Index.

ByNaveen K. Singh

ByNaveen K. Singh

Fundamentals of

DISTRIBUTEDSYSTEMS



`

CONTENTS



`



`

• Introduction of Distributed System • System Model • TheoreticalFoundation for Distributed System • Distributed Mutual Exclusion andDistributed Shared Memory • Distributed Deadlock and LoadScheduling • Agreement Protocol • Interprocess Communication andSynchronization • Distributed File System • Security in DistributedSystem • Transactions and Concurrency Control • Replication• Distributed Algorithm • Distributed Multimedia and Database System• Corba Case Study • Model Question Papers • Index.



`

By

Sunil Gupta


CRYPTOGRAPHYAND

NETWORK SECURITY

Unit-I: Introduction to Cryptosystem

Unit-II: Introduction toAlgorithms and Public Key Crypto system

Unit-III:Authentication Hash Function

Unit-IV:AutheneticationApplications

Unit-V: Introduction to Cryptography

• Introduction to Cryptosystem • Classical Encryption Technique • ModernBlock Cipher Principle • Data Encryption Standard.

• Group Ring and Fields •Algorithms and Remainder Theorem • Public KeyCryptosystem.

• MessageAuthentication and Hash Function • Digital Signature.

•AuthenticationApplications.

• IP Security • Web Security • System Security • Advanced Algorithm andStandards • Model Test Papers • PreviousYear Examination Papers • Index.





` By

S. RaiR. Ghosh


SYSTEM



`

CONTENTS

Simplified Approach to


SYSTEM



`

CONTENTS• Management Information System • Information System • SystemConcepts • Database Management System • Need of the InformationSystem for Managers • Information System and Business • MIS ModelsDevelopment Stages • Evaluation of Management Information System •Ethical and Security Issues • Index.

Unit-I: Foundations of Information System

Unit-II: An Overview of Management Information System andConceptual

Unit-III: BusinessApplications in Information Technology

Unit IV: Managing Information Technology andAdvanced Concepts

• Introduction to Information in Business • Solving Business Problem withInformation System, Types and its Efficiency and Effectiveness.

• MIS Concept, Data Processing, IRM and End-User Computing • Concept ofOrganizational Planning, Control Process & Computational Support forPlanning.

• Internet, E-Commerce and Intranet, Extranet and Enterprise Solution• Information System for Business Operation and Decision Support.

• Enterprise, Global Management, Planning and Information System forStrategic Advantages • Security and Ethical Challenges and AdvancedConcepts in Information System • Mini Illustrative Projects and Suggestions •Index.

ByRavi Kumar

Ranjeev K. Chopra

CONTENTSCOMPUTERAWARENESS

(Introduction to Computers)

ByDr. P.C. Reddy

• Introduction to Computers • Input-Output Devices • ComputerSoftware • Business Systems • Disk Operating System • WindowsOperating Systems • GW Basic • C Programming • C++ Programming• Information Retrieval-Fox Pro • Microsoft Word • Microsoft Excel• Microsoft PowerPoint • Microsoft Access • Microprocessor•AutoCAD • Programming Techniques • Robotics • Index.

ENTERPRISERESOURCEPLANNING(Text and Cases)

ByDr. P.C. Reddy

K. Viswaksena Reddy



`

Unit-I: Introduction to ERP

Unit II: ERPTools

Unit-III: ERPMarkets

Unit-IV: ERPImplementation.

Unit-V: ERPand E-Commerce

• Conceptual Model of Enterprise Information System • Evolution ofEnterprise Resource Planning System • Structure and Benefits of EnterpriseResource Planning.

• Business Processing Reengineering • Data Warehousing, Data Mining andOLAP•Advanced Tools of ERPSystem.

• ERP Market Places and Dynamics • ERP Functional Modules • Integrationof ERPSystem.

• ERPImplementation • Methodology of ERPDesign

• ERP and E-Commerce • Integrating ERP and Success Factors • ERPTools—ASAPHR Case Study • Index.

CONTENTS



REAL TIMESYSTEM

CONTENTS• Overview of Real Time System • Introduction to Real Time System• Basic Model of Real Time System • Real Time Scheduling Concepts• Scheduling Aperiodic and Sporadic Jobs in Priority Driven and ClockDriven Systems • Resources Access Control • Handling Task inMultiprocessor Environment • Communication in Real Time System• Real Time Operating System • Real-Time Database • Fault ToleranceTechnique • Designing Issues in Real-Time System • Realistic RealTime System • Software Engineering and Management Issues in RTS• Programming Languages and Tools in RTS • Expert System and Real-Time JAVA Technology • Glossary • Model Test Papers • ExaminationPapers • Index.

ByShadab Irfan

ALGORITHMANALYSIS AND

DESIGN

CONTENTS• Introduction • Growth of Functions • Recurrences • Divide andConquer • Medians and Order Statistics • Data Structure for DisjointSets • Dynamic Programming • Greedy Method • Graphs • StringMatching • NPComplete •Appendix • Model Test Papers • ExaminationPapers • Index.

ByEr. Deepak Gupta



`



`



`

By

Deepak Gupta

CONTENTSA Course in

DATA STRUCTURESUsing C

• Introduction to Data Structure • Recursion • Arrays • Structures• Pointers • Linked List • Sparse Matrix • Stacks • Queues • Trees• Graphs • Sorting • Searching • Files •Appendices • Index.

MODELLINGAND

SIMULATION

ByPushpa Singh

Narendra Singh



`

• Introduction to System and Models • System Study • SystemSimulation • Input Data Model • Process and Validation of Modelingand Simulation • Basic of Probability • Continuous and Discrete SystemSimulation • System Dynamics • Random Number Generation• Simulation of Queuing System • Arrival Patterns and Discrete SystemSimulation • Simulation Language • GPSS • Estimation and OutputAnalysis of Simulation • Simulation of PERT Network • Real WorldApplication of Simulation • Appendices • Model Test Papers• Examination Papers • Index.

CONTENTS





`By

Er. Deepak Gupta

DATASTRUCTURES

Size: 20 × 30/8Pages : 425 ApproxISBN : 978-93-80027-95-1


`

CONTENTS

COMPUTERNETWORKS

(With LAN& Networking Concepts)



`

CONTENTS• Introduction to Computer Networks • Network Architecture • DataCommunication and Physical Layer • Data Link Layer • MAC Layer• Network Layer • Network Security and Application Layer Protocols• Examination Papers • Index.

Unit-I:

Unit-II & Unit-III:

Unit-IV: • Sorting

• Introduction to Data Structure • Arrays • Linked List • Sparse Matrix• Stacks • Queues.

• Trees • Balanced Search Trees • Graphs

• Searching • PreviousYear Examination Papers • Index.

ByEr. Deepak Gupta

CONTENTSDATASTRUCTURES

USING C++

ByDeepak Gupta

• Data Structures and Complexity Analysis • Linear Lists • Stacks andQueues • Hashing • Trees • Graphs •Appendix • Index.

Introduction to

PROGRAMMING

ByEr. Deepak Gupta



`

Unit-I: Introduction to Programming

Unit-II: Programming Using C

Unit-III: Iterations and Subprogramms

Unit-IV: Pointers and Strings

• Introduction to Computer and Programming Languages • DataRepresentation• Overview ofAlgorithm, Flowcharts and DFD.

• Overview of C Language • C Language Basics • Input-OutputOperations in C • Operators and Expressions in C • Decision-Makingand Branching (Selection) in C.

• Loop Control Power in C • Functions in C •Arrays in C.

• Strings in C • Structures and Union in C • Pointers in C • Appendices• Examination Paper • Bibliography • Index.

CONTENTS



DATABASEMANAGEMENT

CONCEPTS

CONTENTS

• Introducting Database Management System • Database Architecture• File Organization Techniques • Data Models : Object Based LogicalModel • Enhanced E-R Diagram (EER) • Other Data Models• Relational Data Models • Relational Algebra • Structured QueryLanguage (SQL) • Advance SQL • QBE and QUEL • NormalizationFundamental • Normalization • Database Security and IntegrityConstraints • Query Processing and Optimization • TransactionProcessing Concepts • Concurrency Control Techniques • DistributedDatabases • Emerging Database Technologies • Study of RDBMSThrough Oracle •An Introduction to PL/SQL•Appendices • Index.

ByAshutosh K. Dubey



`



`By

Gunjan Goswami


ARTIFICIALINTELLIGENCE

Unit-I:

Unit-II:

Unit-III:

Unit-IV:

Unit-V:

• Introduction to Artificial Intelligence • Intelligent Agents • Problems,Problem Spaces and Search • Informed Search Strategies • GamePlaying.

• Knowledge Representation • Propositional and First Order Logic.

• Reasoning • Reasoning with Uncertainty–Fuzzy Reasoning.

• Planning • Machine Learning • Overview of Biological Neurons• Fundamental Concepts of Artificial Neural Networks • GeneticAlgorithm.• Natural Language Processing • Rule Based Expert Systems • Robotics•Appendices • Model Question Papers • Index

DESIGN ANDANALYSIS

OFALGORITHMS

CONTENTS

• Introduction • Growth of Functions • Recurrence • Sorting Algorithms• Divide and Conquer • Heapsort • Quicksort • Sorting in Linear Time• Median and Order Statistics • Red Black Tree • Augmenting DataStructures • Dynamic Programming • Greedy Algorithms • AmortizedAnalysis • Btree • Binomial Heaps • Fibonacci Heaps • Data Structuresfor Disjoint Sets • Backtracking • Branch and Bound • ElementaryGraph Algorithms • Minimum Spanning Tree • Single Source ShortestPaths • All Pairs Shortest Paths • Maximum Flow • Sorting Networks• Matrix Operations • Polynomials and the FFT • Number TheoreticAlgorithms • String Matching • NP-Completeness • ApproximationAlgorithms • PreviousYear Question Papers • Bibliography • Index.

ByVinod K. Rajput

ByVinod K. Rajput

ANALYSIS ANDDESIGN OF

ALGORITHMS

CONTENTS• Introduction • Elementary Data Structures • Sorting Algorithms• Searching Algorithms • Divide and Conquer • The Greedy Method• Dynamic Programming • Backtracking • Branch and Bound • NP-Hard and NPComplete Problems • Index.



`



`





`By

Pandey & Pandey

DATA MINING ANDDATA

WAREHOUSING



`

CONTENTS

E-COMMERCEAND

APPLICATIONS



`

CONTENTS• Introduction to E-Commerce • E-Commerce Framework• Architectural Framework of E-Commerce • Security Issue of ECommerce • Electronic Payment Systems • Electronic CommerceApplication • Implementation of E-Commerce • E-Commerce Issuesand Tools • E-Governance • Practicals • Appendices • Model QuestionPaper • Index.

• Introduction to Data Warehousing • Data Warehouse: Features andArchitecture • Dimensional Modeling • Olap Strategies for Large DataWarehouse Projects • Data Warehouse Implementation • Introduction toData Mining • Data Mining Query Language • Classification• Association Rules • Clustering • Mining Complex Types of Data• Question Bank • Test Yourself • Model Test Papers • ExaminationPapers • Index.

ByPandey & Pandey

CONTENTSINTERNETPROGRAMMING

USING JAVA

ByGunjan Goswami

• Introduction to JAVA • Fundamental and Control Structure • Class andMemory Management • Interfaces and Packages • The I/O Package andStream Classes • Exception Handling • Threads and Multi-Threading• Applet • Java Data Base Connectivity (JDBC) • Appendix (Practicals)• Model Test Paper • Index.

ADVANCECOMPUTER

ARCHITECTURE

ByGunjan Goswami



`

Unit-1: Introduction

Unit 2: Processor and Memory Hierarchy

Unit-3: Cache Memory

Unit-4: ParallelArchitectures

• Fundamentals of ComputerArchitecture • Pipelining.

• Memory Hierarchy Design • Processor Memory Modeling usingQueuing Theory • Concurrent Processors.

• Cache Memory Organisation • Cache Coherence and Synchronization.

• Shared Memory Multiprocessors • MIMD Architecture and SPMD• Important Notes • Question Bank • Model Papers • Previous YearExamination Papers • Index.

CONTENTS



SOFTWAREARCHITECTURE

CONTENTS

Unit-1 • Introduction to SoftwareArchitecture

Unit-2 •Architectural Modeling

Unit-3 • Case Study Design

Unit-4 •Aspect OrientedArchitecture

Unit-5 • The Semantic Web

• Intruducing the Case Study • Software QualityAttributes

• Pattern.

• FurtherAnalysis • Software Product Lines.

• Model-Driven Architecture • Service-Oriented Architectures andTechnologies.

• Model Question Papers • Index.

BySubodh Prasad

ADVANCEJAVA

CONTENTS• Introduction to JAVA • Inheritance and Interfaces • Packages andException Handling • Multithreading in JAVA • Input/Output in JAVA• AWT and Applets in JAVA • Networking • Database Networking• Distributed Objects • Swings • Abstract Window Toolkit (AWT)• JAVA Beans Components • Security • Appendix • Previous YearsExamination Paper • Index.

ByKanika Lakhani

By

Kanika LakhaniGaurav Girdhar

DATA MINING &DATA

WAREHOUSING



`

CONTENTS



`



`

• Data Mining • Data Preprocessing, Language and ConceptDescription • Associative Mining Rule • Classification and Prediction• Cluster Analysis • Introduction to Data Warehousing • DataWarehousing and OLAP • Client- Server Computing • Web Mining• Security in DWH and Data Mining •Appendix • Index.



`By

Kanika Lakhani

CONTENTSADVANCEJAVA

PROGRAMMING

• JAVA Beans and Web Services • JAVA Script • JAVA Server Pages• Database Connectivity • JAVA Servlet • J2SE: Concepts andPrerequisites • J2EEArchitecture • PreviousYear Paper • Index.



VISUALPROGRAMMING

(Using Visual Basic)

CONTENTS• Introduction to Visual Programming • Introduction to Visual Basic• Visual Basic Structure • Designing the User Interface • Menus andCommand Dialog Control • Display Date/Time and Print • DatabaseProgramming • Working with ActiveX • Practices in Visual Basic• Question Bank • Model Test Papers • Index.

ByPooja SharmaD.S. Sehrawat

ByPooja SharmaD.S. Sehrawat

RELATIONALDATABASE

MANAGEMENTSYSTEM

CONTENTS• Introduction • Database System Concepts and Architecture • DataModeling using E.R. Model • The Relational Data Model and RelationalDatabase • Normalization • SQL (Structure Query Language) • PL/SQL• Data Access and Security • Practicals • Question Bank • ExaminationPapers • Index.

ByD.S. Sherawat

Sanjay Sharma

MULTIMEDIAAND

APPLICATIONS



`

CONTENTS



`



`

• Introduction to Multimedia • Multimedia Hardware • MultimediaFiles • Introduction to Photoshop • Additional Effects of Photoshop• Working with Photoshop • Introduction to Flash • Animating in Flash• Introduction to Director • Question Bank • SBTE Previous YearQuestion Papers • Index.



`By

Varun GoyalGaurav Gupta

CONTENTSINFORMATIONTHEORY AND

CODING

• Probability and Random Variable • Random Processes • InformationTheory and Source Coding • Linear Block Codes • Convolutional Codesand ARQ • Appendix • References • Previous Year Question Papers •Index.


MOBILECOMPUTING



`

CONTENTS

• Introduction • Wireless Networking • Data Management Issues• Mobile Agents Computing • Adhoc Networks • Mobile Transactionand Commerce • Personal Communication Service and 3G MobileService • Mobile Operating System • Global Mobile Satellite Systems• Model Question Papers • Examination Paper • Index.

ByRishabh SharmaSanjay Kumar


Price: 225/-First Edition:2011

` By

Umesh Sehgal

CONTENTSOPERATINGSYSTEMS Unit-I: Overview

Unit-II: Process Management

Unit-III: Process CoordinatorUnit-IV: Memory Management

Unit-V: Storage Management

Unit-VI: Protection and Security

Unit-VII: Distributed Operating System

Unit-VIII: Special Purpose System

• Introduction • System Structure.• Process Concept • Multithreaded

Programming • Process Scheduling.• Synchronization • Deadlock.

• Memory Management Strategies• Virtual MemoryAllocation.

• File System • Implementing FileSystem • Secondary Storage Structure • Input and Output System.

• System Protection • SystemSecurity • Firewalls.

• Distributed OperatingSystem • Distributed File System • Distributed Synchronization.

• Real Time System • MultimediaSystem •Appendices • Index.

SOFTWAREQUALITY

ENGINEERING

ByRishabh Sharma



`

• Introduction • Software Metrics Overview • Software QualityManagement and Models • Software Quality Assurance • SoftwareQuality Assurance Standards • Software Engineering Concepts• Software Process and Methods • Software Verification, Validation andTesting • Questions with Answers • Model Question Papers• Examination Paper • Index.

CONTENTS



APPLIED SCIENCE

NUMERICALMETHODS

(A Programming Approach)

CONTENTS• Number System and Error Analysis • Algebraic and TranscendentalEquations • Simultaneous Linear Algebraic Equations • MatrixInversion and Eigne Values • Curve Fitting and Method of LeastSquares • Finite Differences • Interpolation • Numerical Differentiation• Numerical Integration • Ordinary Differential Equation • NumericalSolution of Equation • Numerical Solution of Partial DifferentialEquations • Bibliography.

ByGirish Nayyar

NUMERICALANALYSIS

CONTENTS• High Speed Computations and Errors • Solution of Algebraic andTranscendental Equations • Solution of Linear Simultaneous Equationsand Matrix Inversion Method and Eigen Values • Finite Differences• Interpolution with Equal Intervals • Interpolation with UnequalIntervals • Central Difference Interpolation Formulae • NumericalDifferentiation and Integration • Numerical Integration • Solution ofDifferential Equations Numerical Solution of Ordinary DifferentialEquations • Curve Fitting by Method of Least Square and Cubic Spline• Linear Programming Problem • Statistical Computation • Model TestPapers • Examination Papers • Index.

By

Dr. Surbhi GuptaDr. Abhilasha Sharma

ByDr. P. Prasad

The Functional Aspects of

COMMUNICATIONSKILLS



`

CONTENTS



`



`

• Introduction • Communication: Its Types and Significance • ReadingSkills• Writing Skills • Grammar • Syntax • One Word Substitution,Abbreviations, Technical Terms and Idioms and Phrases • Phonetics• Listening Skills • Speaking Skills • Campus Recruitment, Interviewand Group Discussion • Meetings Negotiations Phone and MobilePhone Skills • Business Correspondence • Fax and Email in BusinessCorrespondence • Legal and Social Correspondence • Technical andScientific Report • Conclusion: Soft Skills for Global Leadership• PreviousYear Solved Question Papers • Index.



`

By

Dr. P. Prasad

CONTENTSPROFESSIONALCOMMUNICATION

(Global Good English)

• Introduction • Speaking Skills • Main Types of InteractiveCommunication • Basics of Technical Communication • Synonyms andAntonyms, Homonyms and Homophones and Words used as DifferentParts of Speech • Idioms and Phrases, One Word Substitution andTechnical Terms • Paragraph and Art of Condensation • TechnicalCommunication • Job Application, Resume and OfficialCorrespondence • Legal and Social Correspondence • Reports andTechnical Proposals • Technical and Research Papers • ReadingComprehension and Paraphrase • Essay Writing, Journalistic and T.V.Write-UPS • Phonetics • Structure of Sentences/Clauses • AppliedGrammar and Usage • Conclusion • Previous Year Question Papers• Index.


APPLIED SCIENCE



` By

Dr. Rakesh Dogra

PROFESSIONALCOMMUNICATION



`

CONTENTS

ENGINEERINGPHYSICS



`

CONTENTSUnit-I: Properties of MatterUnit-II: Heat

Unit-III: Optics

Unit-IV: Waves and Oscillations

Unit-V: Electricity and Magnetism

Unit-VI: Modern Physics and Statistical Mechanics

Unit-VII: Solid State

Unit-VIII: Universe

• Vectors • Kinematics • Dynamics.• Temperature Measurement and Heat Radiation

• Thermoelectricity.• Interference • Diffraction • Polarization • Optical Instruments

• Laser • Holography and Fiber Optics.• Oscillations • Wave Motion • Acoustics

• Ultrasonics.• Electrostatics • Magnetostatics

• Electromagnetism • Maxwell’s Equation.• Atomic Physics

• Quantum Mechanics • X-Rays • Nuclear Radiations • Special Theory ofRelativity • Statistical Mechanics.

• Semiconductors • Crystal Structure, Diffraction &Reciprocal Lattice • Superconductivity • Magnetic Properties of Material.

• Universe • Appendices • Experiments • Model QuestionPapers • PreviousYear Question Papers • Index.

• Fundamentals of Communication • Constituents of Technical WrittenCommunication • Business Communication • Presentation Strategiesand Listening Skills • Value-Based Text Readings • Practicals• Vocabulary • Model Test Papers • Examination Papers• Index.

ByDr. Abhijit Nayak

CONTENTSEssentials of

(With Experiments)

PHYSICS

By

Dr. Raavee Tripathi

• Electromagnetic Waves and Dielectrics • Magnetic Materials andSuperconductivity • Elements of Crystallographies • Lasers • FibreOptics • Special Theory of Relativity • Quantum Theory • Nanophysics• Quick Review to Important Definitions • Experiments (PTU Syllabus)• Tables of Various Physical Quantities • Model Papers • Previous YearExamination Papers • Index.

EFFECTUALCOMMUNICATION

SKILLS

ByBhupender Kaur



`

CONTENTSPart-A: Communication Skills

Part-B: Grammar

• Communication Meaning and Process • Channels of Communication• Media of Communication • Listening—Process and Types • FeedbackSkills • Note Making and Note Taking • Barriers to Communication• Group Discussion • Meeting Skills • Telephonic Skills • Skills ofEffective Writing • Writing Styles • Scientific and Technical Writing• Speaking Skills • Process of Reading • Efficient Reading • ReadingSkills Methodologies • Elements of Business Correspondence • Typesof Business Letter Writing • Report Writing.

• Transformation of Sentences • Corrections of Incorrect Sentences• One Word Substitutions • Short Answer Type Questions • PreviousYear Examination Papers • Index.


APPLIED SCIENCE

NUCLEARSCIENCE

CONTENTS

Unit-I:

Unit-II:

Unit-III:

Unit-IV:

Unit-V:

• Nucleus and its Basic Features.

• Nuclear Models.

• Nuclear Reaction.

• Nuclear Decay • Chapter 5 : Nuclear Instruments-I.

• Nuclear Instruments-II Accelerators • Detectors • Applications ofNuclear Techniques • Examination Papers • Index.

ByChanchal Garg

PETROCHEMICALS CONTENTS• The Origin of Petroleum • Global Petroleum Resources :AView to theFuture • Composition of Crude Oil • Characteristics of PetroleumProducts • Refining of Crude Oil • Cracking (Chemistry) • PetroleumProducts • Petrochemicals Industry • Bibliography • Index.

ByDr. Anjana Srivastava

By

Manpreet SinghDr. Major SinghHitaishi Gupta

APPLIEDPHYSICS-I


Price: 250/-`

CONTENTS



`



`

Section-A: Theory

Section-B: Experimental Physics

• Units and Dimensions • Force and Motion • Work, Power and Energy• Rotational Motion • Properties of Matter • Thermometry.

• Experiments • PSBTE Question Papers with Solutions • Index.

CONTENTSAPPLIEDPHYSICS-II Section-A: Theory

Section-B:Section-C:Section-D:

• Waves and Vibrations • Applications of Sound Waves • Optics• Electrostatics • DC Circuits • Electromagnetism • SemiconductorPhysics • Modern Physics.

Objective Physics.Experimental Physics.Board Examination Papers.

ByManpreet SinghDr. Major SinghHitaishi Gupta


Price: 250/-`


APPLIED SCIENCE



`By

Adesh K. Pandey

LASER SYSTEMSAND

APPLICATIONS



`

CONTENTS

DISCRETEMATHEMATICS



`

CONTENTS• Set Theory • Propositional Calculus and Formal Logic • Methods ofProof • Combinatorics • Relation • Lattices • Boolean Algebra• Recurrence Relation • Graph Theory • Algebraic Structures • Matrices• Finite State Machine • Logic Programming • Appendices• Miscellaneous Exercises • Previous Year Solved Question Papers• Index.

• Review of Elementary Quantum Mechanics • Introduction to Laser• Laser Systems • Applications of Laser-I • Applications of Laser-II• Model Question Papers • PreviousYear Question Paper • Index.

ByDr. Anjana Gupta

CONTENTSDISCRETESTRUCTURES

By

Dr. Rajesh Mishra

• Introduction to Discrete Structures • Set Theory • Relations• Functions • Boolean Algebra • Propositional Logic • CountingTechniques • Discrete Numeric Functions and Generating Functions• Recurrence Relations • Groups • Rings and Fields • Posets, HasseDiagrams and Latices • Graph • Trees • Examination Papers • Index.

ENGINEERINGPHYSICS-I

ByDr. Rajesh Mishra



`

CONTENTS• Relativistic Mechanics • Electromagnetics • Interference • Diffraction• Polarisation of Light and Double Refraction • Introduction to Laser• Optical Fibres • Model Question Papers • Index.


APPLIED SCIENCE

DISCRETESTRUCTURES

• Set Theory • Relation • Function • Algebraic Structures • Rings andFields • Posets, Hasse Diagrams and Lattices • Boolean Algebra• Graphs • Euler and Hamiltonian Graphs • Tree • Planar Graphs• Matrix Presentation of Graphs • Colouring of Graphs • PropositionalCalculus and Formal Logic • Methods of Proof • Finite State Machines• Combinatorics • Examination Papers • Index.

ByK. Patrai

A Textbook of

APPLIEDMATHEMATICS-I

CONTENTS

• Differential Calculus (Curve Tracing) • Curvature • Partial Derivatives• Applications of Partial Differentiation • Errors and Increments, RateMeasures (Applications of Partial Differentiation) • Maxima andMinima (Applications of Partial Differentiation) • Applications ofIntegral Calculus • Analytical Solid Geometry • Multiple Integrals andtheir Applications • Vector Calculus and Application of Vector Calculus•Appendices • Sample Papers • Index.

ByDr. J.S. Bindra

By

Dr. J.S. Bindra

A Textbook of

APPLIEDMATHEMATICS-II



`

CONTENTS



`



`

• Ordinary Differential Equations of First Order and Applications• Lindear Ordinary Differential Equations of Second and Higher Orderand its Applications to Electric R-L-C Circuits, Deflection of Beams,Simple Harmonic Motion • Matrices • Infinite Series • ComplexNumbers and Elementary Functions of Complex Variable• Sample Papers • Solved Examination Paper • Previous YearsExamination Papers • Index.


APPLIEDMATHEMATICS-III

• Fourier Series • Laplace Transforms • Special Functions • PartialDifferential Equations • Complex Variables • Numerical Solution ofOrdinary and Partial Differential Equations • Linear Systems and EigenValues • Probability, Probability Distributions, Sampling Distributionand Testing of Hypothesis • Tables • Appendices • Sample Papers• Index.

By

Dr. J.S. Bindra


Price: 325/-Ninth Edition : 2012

`

CONTENTS


APPLIED SCIENCE



`

ENGINEERINGMATHEMATICS-I



`

CONTENTS

Elements of

ENGINEERINGMATHEMATICS-II



`

CONTENTSUnit-I

Unit-II

Unit-III

Unit-IV

Unit-V

• First Order Differential Equations and their Applications • LinearDifferential Equations of Higher Order and theirApplications.

• Series Solution of Different Equations • Bessel’s Equation and BesselFunctions • Legendre’s Equation, Legendre Polynomials etc.

• Laplace Transformation and its applications • Infinite Series –Convergence and Divergence

• Fourier Series and Harmonic Analysis • First Order Partial DifferentialEquations • Partial Differential Equations of Higher Order andApplications.

• Physical Applications of Second Order P.D.Es. • Answers and Hints toExercises • Examination Papers.

• Infinite Series • Matrices-Elementary Operations and Rank• Dependence/ Independence of Vectors, Consistency of Equations andComplex Matrix • Eigen Values, Eigen Vectors and Diagonalising AMatria • Successive Differentiation, Maclaurin’s and Taylor’sExpansion of Functions • Asymptotes and Curvature • Curve Tracing• Partial Differentiation and Jacobians • Applications of PartialDifferentiation and Differentiation Under Integral Sign • BETA andGAMMA Functions • Applications of Single Integration • Double andTriple Integration withApplications •Answers to the Unsolved Problemin Exercise.

CONTENTSElements of

ENGINEERINGMATHEMATICS-III

By

Dr. V.P. Mishra

Unit-I: Function of Complex Variable

Unit-II: Statistical Techniques-I

Unit-III: Statistical Techniques-II

Unit-IV: Numerical Techniques-I

Unit-V: Numerical Techniques-II

• Functions of Complex Variables and Analyticity • Expansion of ComplexFunctions and Complex Integration.

• Statistical Methods • Curve-Fitting – Method of Least Squares • ProbabilityTheory.

• Probability Distributions: Binomial, Poission and Normal Distribution• Sampling, Tests of Significance, ‘t’Test, **-test and Statistical Quality Control.

• Numerical Solution of Equations in One Variable • Finite Differences andInterpolation

• Solution of Simultaneous Equations • Numerical Differentiation and NumericalIntegration • Numerical Solution of Ordinary Differential Equations•Answers to the Unsolved Problems in Exercises •Appendix.

Elements of

ENGINEERINGMATHEMATICS-I

ByDr. V.P. MishraDr. Jyoti Sinha





`

CONTENTSUnit I : Differential Calculus-I

Unit II : Differential Calculus-II

Unit III : Multiple Integrals

Unit IV : Vector Calculus

Unit V : Matrices

• Successive Differentiation, Expansion of Functions of one Variable•Asymptotes, Curvature and Curve Tracing.

• Partial Differentiation • Expansion of Functions of Several Variables andJacobians •Applications of Partial Differentiation.

• Double Integration and Change of Order of Integration • Triple Integrals andApplications to Area and Volume • Beta and Gamma Functions, Dirichlet’sIntegral.

• Vector Differentiation • Vector Integration.

• Matrices—Elementary Operations and Rank of a Matrix • Linear Dependenceof Vectors and Consistency of Equations • Eigen Values, Eigen Vectors,Diagonalising a Matrix and Complex Matrix • Short Answer Type Questions•Answers and Hints to Exercises • Examination Papers • Index.


APPLIED SCIENCE

Question Bank in

ENGINEERINGMATHEMATICS

CONTENTS• Complex Numbers: de Moivre’s Theorem • Infinite Series: Convergence andDivergence • Successive Differentiation, Expansion of Functions andApproximateCalculations • Asymptotes and Curve Tracing • Mean Value Theorems andCurvature • Definite Integrals and Reduction Formulae • Applications ofIntegration • Matrices and their Applications • First Order Differential Equationsand their Applications • Linear Differential Equations of Higher Order andApplications • Partial Differentiation • Applications of Partial Differentiation• Multiple Integrals • Vector Differentiation • Vector Integration • Functions of aComplex Variable- Analyticity and Transformation • Complex Integration• Laplace Transformation and its Applications • Fourier Series and HarmonicAnalysis • BETA, GAMMA Functions and Series Solution of DifferentialEquations • Bessel’s Equation and Bessel Functions • Legendre’s Equation,Legendre Polynomials • First Order Partial Differential Equations • PartialDifferential Equations of Higher Order and Applications • Fourier Transforms andApplications • Error Analysis and Numerical Solution of Equations • FiniteDifferences and Interpolation • Numerical Differentiation and Integration• Difference Equation and Numerical Solution of Ordinary Differential Equations.

ByV.P. Mishra

PROBABILITYAND

STATISTICS

CONTENTS• Probability and Probability Distribution • Measures of Dispersion• Curve Fitting & Principle of Least Squares • Correlation Analysis• Regression Analysis • Sampling Theory • Hypothesis Testing•Appendix • Solved Examination Paper • Model Test Papers • Index.

ByDr. Hari Arora

By

Dr. Hari Arora

A Textbook of




`

CONTENTS



`



`

• Linear Algebra • Multivariable Differential Calculus • MultivariableIntegral Calculus • Vector Calculus • Model Test Papers • Index.

CONTENTSDIFFERENTIALEQUATIONS

AND COMPLEXANALYSIS

• Ordinary Differential Equations • Linear Partial DifferentialEquations of Order One • Non-Linear Partial Differential Equations ofFirst Order • Linear Partial Differential Equations with ConstantCoefficients • Complex Numbers • Complex Analysis • Model TestPapers • Index.

By

Dr. Hari Arora



`


APPLIED SCIENCE



`

NUMERICALMETHODS ANDOPTIMIZATION



`

CONTENTS





`

CONTENTSUnit-I:Algebra

Unit-II: Trigonometry

Unit-III: Complex Numbers

Unit-IV: Coordinate Geometry

Unit-V: Differential Calculus-I

• Arithmetic and Geometric Progression • Partial Fractions• Permutation and Combinations • Binomial Theorem • Matrices andDeterminants • Exponential and Logarithmic Series • VectorAlgebra.

• Trigonometry • Graphs.

• Complex Numbers.

• Points and Straight Line • Circle and Parabola.

• Functions, Limits and Continuity • Differentiation • Applications ofDerivatives • Examination Papers • Index.

•Approximation and Errors in Computation • Solution ofAlgebraic andTranscendental Equation • Solution of Simultaneous Equations• Calculus of Finite Differences • Interpolation with Equal and UnequalIntervals • Numerical Differentiation and Integration • NumericalSolution of Ordinary Differential Equations • Linear Programming-I:Problem Formulation and Graphical Method • Linear Programming-II:Simplex Method • Model Question Papers • Solved Examination Papers• Index.

CONTENTSAPPLIEDMATHEMATICS-II


By

Dr. Hari Arora

• Differential Calculus • Integral Calculus • Fourier Transforms• Laplace Transforms • Ordinary Differential Equations • VectorCalculus • Statics and Probability • Examination Papers • Index.

APPLIEDMATHEMATICS-II

(Amity University)

ByDr. Hari Arora

ByDr. Hari Arora

A. Sachdev

ByDr. Hari Arora

A. Sachdev



`

CONTENTS• End Term Examination, April 2012 • End Term Examination, April2012 (Only for Repeaters) • Mid Term Examination, February 2012• End Term Examination, April 2011 • End Term Examination, April2011 (Only for Repeaters) • End Term Examination,April 2011 (Only forRepeaters) • Supplementary Examination, June 2011 • SupplementaryExamination, June 2011 • Mid Term Examination, February 2011 • EndTerm Examination, April 2010 • End Term Examination, April 2010(Only for Repeaters) • Supplementary Examination, June/July 2010• End Term Examination, May 2009 • Supplementary Examination,September 2009 • Special Supplementary Examination, September 2009• End Term Examination, September 2008 (Old Syllabus) • SpecialSupplementary Examination, 2008 • Mid Term Examination, February2008 • End Term Examination, May 2007 (Old Syllabus) • SamplePaper-1 • Sample Paper-2 • Sample Paper-3 • Model Test Paper-1• Model Test Paper-2 • Model Test Paper-3 • Tutorial Sheets.


APPLIED SCIENCE

MATHEMATICS(Based on Latest CBSE Syllabus

and CCE Pattern)Class IX Term I & II

CONTENTSTerm-I

Term-II

• Number System • Polynomials • Coordinate Geometry • Lines andAngles • Congruent Triangles • Introduction to Euclid’s Geometry• Heron’s Formula.

• Linear Equations in Two Variable • Quadrilaterals • Areas ofParallelograms and Triangles • Circles • Constructions • Surface Areasand Volumes • Statistics • Probability • Value Based Questions • FullCourse Test (SA-I and SA-II).

ByUpadhyay &

Upadhyay

ByUpadhyay &

Upadhyay

MATHEMATICS(Based on Latest CBSE Syllabus

and CCE Pattern)Class X Term I & II

CONTENTSTerm-I

Term-II

• Real Numbers • Polynomials • Pair of Linear Equations in TwoVariables • Triangles • Introduction to Trigonometry • Statistics.

• Quadratic Equations • Arithmetic Progressions • CoordinateGeometry • Some Applications of Trigonometry • Circles• Constructions • Area Related to Circles • Surface Areas and Volumes• Probability • Full Course Test.

By

Dr. O.N. Pandey

Introduction to

BIOSCIENCE



`

CONTENTS



`



`

• Living World • Cell Structure and Function • Metabolic Engineering• Molecular Biology, Economics and Proteomics • Cell Division• Genetic Engineering • Gene Sequencing • Stem Cells • HumanReproduction • Reproductive Health • Microbes • Human Welfare• Tissues in Animals and Plants • Plant Physiology • Plant Growth andDevelopment • Morphology, Anatomy and Functions of Different Partsof Flowering Plants •Appendices • Index.


BIOSCIENCE • Introduction to Bioscience: Cell Structure and Function • MetabolicEngineering • Molecular Biology, Genomics and Proteomics DNA andRNA: The Molecular Basis • Cell Division: Proliferation • GeneticEngineering • Gene Sequencing • Stem Cells • Human Reproductionand Reproductive Health • Productive Health • Model Question Paper• References • Index.

By

Sweety Israni



`

Two Colours Edition


APPLIED SCIENCE



`

New Course

ENGINEERINGCHEMISTRY



`

CONTENTS

ENGINEERINGCHEMISTRY(With Experiments)



`

CONTENTS• Fuels • The Phase Rule • Catalysis • Water • Corrosion and its Control• Experiments • Examination Papers • Index.

• Phase Rule and Catalysis • Water and its Treatment (Part I) • Water andits Treatment (Part II) • Corrosion and its Prevention • Lubrication andLubricants • Polymer and Polymerisation • Instrumental Methods ofAnalysis • Experiments • Index.

CONTENTSComprehensive


By

Dr. S.K. Bhasin

• Chemical Bonding • Liquid Crystals • Solid State Chemistry• Polymers • Grignard Reagent and its Applications • Stereo Chemistry• Organic Reaction • Cement and Plaster of Paris • Lubricants• Corrosion • Water • Phase Rule • Spectroscopy • Fuels • Experiments• Examination Papers • Index.

New Course

(Theory and Practicals)


ByDr. S.K. BhasinPunit Bhardwaj

ByDr. Sunita Rattan

ByDr. Sunita Rattan



`

CONTENTSPart ISectionA

Section B

Section C

Section D

Part II : Practicals

Part III

• Electrochemistry • Phase Rule.

• Water Treatment • Corrosion and its Control.

• Instrumental Methods ofAnalysis • Fuels and Combustion.

• Polymers • Composite Materials.

Experiments.

• Solved Question Paper • Model Question Papers • Index.


APPLIED SCIENCE


CONTENTS

Unit 1: Atoms to Molecules to Materials for Engineers

Unit 2: Characterization and Analysis of Materials

Unit 3: Stability and Reactivity of Molecules: Unit Processes

Unit 4: Water and its TreatmentUnit 5: Some Materials of Industrial Importance

• ChemicalBonding-I • Chemical Bonding-II • Structure and Stereo Structure ofMolecules.

• Micro andMacro Properties of Molecules • Physical Methods of Purification• Chromatography • Instrumental Methods of Analysis • SurfaceTension, Viscosity and Conductivity.

• Reactivity of Molecules: Fundamentals of Organic Mechanism• Reaction Dynamics Chemical Kinetics • Catalysis.

• Water and its Treatment.• Polymers

• Silicones • Metallic-Corrosion and its Control • ElectrochemicalCell/Electrolysis • Oils, Fats and Lubricants • Practicals • Index.

By

Dr. Sunita Rattan

By

Dr. Sunita Rattan

Experiments in

APPLIEDCHEMISTRY

CONTENTS• Volumetric Analysis • Water Analysis • Ores and Alloy Analysis• Potentiometry and pH Metric Measurements • ConductometricMeasurements • Colorimetric and Spectrophotometric Analysis• Thermochemistry • Chemical Kinetics • Surface Tension • Viscosity• Cryoscopy • Polymers • Phase Equilibria • Preparations • Analysis ofCoal • Lubricants • Chromatoraphy • Adsorption • EnvironmentalChemistry •Appendices.

CONTENTS



`

• Water Technology • Fuels • Chemical Bonding-I • Chemical Bonding-II • Coordination Compounds • Electrochemistry • Corrosion and itsControl • Spectroscopic Method of Analysis-I • Spectroscopic Methodof Analysis-II • Catalysis • Polymers • Composites • InorganicsPolymers • Chromatography • Lubricants • Ceramic, Cement,Refractories and Glass • Gaseous State • Thermochemistry • Solutions•The Phase Rule • Chemical Kinetics • Fundamentals of OrganicMechanism • Name Reactions • Stereo Chemistry • Photochemistry• Solid State Chemistry • Liquid Crystals • OrganometallicsCompounds • Transition Elements • Environmental Pollution-I• Environmental Pollution-II • Green Chemistry and its Application• Index.

CONTENTS• Water Technology • Fuels • Instrumental Analysis-I • InstrumentalAnalysis-II • Corrosion and its Control • Lubricants • Experiments•Appendices • Examination Papers • Index.

By

Dr. Sunita Rattan

By

Dr. Sunita Rattan

A Textbook of




`

CONTENTS



`

• Water Technology • Fuels • Chemical Bonding-I • Chemical Bonding-II • Coordination Compounds • Electrochemistry • Corrosion and itsControl • Spectroscopic Method of Analysis-I • Spectroscopic Methodof Analysis-II • Catalysis • Polymers • Composites • InorganicsPolymers • Chromatography • Lubricants • Ceramic, Cement,Refractories and Glass • Gaseous State • Thermochemistry • Solutions• The Phase Rule • Chemical Kinetics • Fundamentals of OrganicMechanism • Name Reactions • Stereo Chemistry • Photochemistry• Solid State Chemistry • Liquid Crystals • OrganometallicsCompounds • Transition Elements • Environmental Pollution-I• Environmental Pollution-II • Green Chemistry and its Application• Index.

CONTENTSTheory and Practicals of


• Water Technology • Fuels • Instrumental Analysis-I • InstrumentalAnalysis-II • Corrosion and its Control • Lubricants • Experiments•Appendices • Examination Papers • Index.

By

Dr. Sunita Rattan



`


APPLIED SCIENCE



`




`

CONTENTS

APPLIEDCHEMISTRY-II



`

CONTENTS• Metallurgy • Corrosion • Fuels • Lubricants • Paints and Varnishes• Refractories • Environmental Pollution and its Control • Polymers,Plastics andAdhesives • Experiments • Examination Papers.

• Spectroscopy and its Applications • Photochemistry • Water and itsTreatment • Green Chemistry and its Applications • Corrosion and itsPrevention • Polymers • Nanochemistry • Petrochemicals • Practicals• Index.

CONTENTSRealm of

SPACE SCIENCE

By

Dr. Sunita Rattan

• Introduction to Space Science • Solar System • The Sun and the Planets• Celestial Mechanics • Stars • Stellar Evolution • White Dwarf• Galaxies • Creation of Universe • Appendix • Model Test Paper• Index.

APPLIEDCHEMISTRY-I

ByDr. Raman Rani

Mittal

ByDr. Raman Rani

Mittal

ByDr. Rajeev Garg



`

CONTENTSSection-A: Theory

Section-B: Practical ChemistrySection-C:

• Basic Concepts of Chemistry • Atomic Structure • Periodic Table• Chemical Bonding • Water • Gas Law and Thermodynamics• Equilibrium,Acids and Bases • Electrochemistry • Organic Chemistry.

• Experiments • Question Papers • Index.


APPLIED SCIENCE


CONTENTSUnit-I: Chemical Bonding and States of Matter

Unit-II: Reaction Kinetics, Phase Rule and Electrochemistry

Unit-III: Structural and Mechanistic Concepts of Organics

Unit-IV: Polymers and Organometallics

Unit-V:Analytical Methods and Fuels

• Chemical Bonding • Liquid Crystals • The Solid State.

• Chemical Kinetics • Phase Rule • Electrochemistry.

• Organic Reactions and Their Mechanism • Stereochemistry of OrganicCompounds.

• Polymer Chemistry • Organometallic Chemistry.

• Spectroscopy • Water Treatment • Fuels • Titrimetric Analysis• Laboratory Practicals • Model Question Papers • Solved Papers• Index.

By

Dr. Renu Gupta

By

Anshu SrivastavaEr. Shakun Srivastava

By

Dr. Rakesh KumarDr. Kamala Pati Tiwary

Fundamentals of

POLYMER SCIENCE& TECHNOLOGY

CONTENTS• Introduction, Nomenclature and Classification • Kinetics ofPolymerization • Polymer Characterization and Analysis • Chemicaland Geometrical Structure of Polymer Molecules and Composites• Organic Polymers • High Performance Polymers • Polymer Processingof High Performance Polymers • Molecular Weight of Polymers • GlassTransition Temperature and Crystallinity of Polymers • Chemistry ofPolymerization • Co-ordination and Co-polymerization• Thermoplastics and Thermosets or Thermosetting Resin • Elastomersor Rubbers and Silicon Polymers • Natural Polymers • Application ofPolymers •Appendices • References • Question Papers • Index.

A Textbook of

NANOSCIENCE



`

CONTENTS



`



`

• Introductory Nanotechnology and Physics of Solid State • QuantumTheory and Properties of Nanoparticles • Growth Techniques ofNanomaterials • Methods of Measuring Properties • Bucky Ball toRobotics •Appendices • Bibliography • Model Questions • ExaminationPapers • Index.


APPLIED SCIENCE

ADVANCEDENGINEERINGMATHEMATICS


Price: 615/-Revised Edition: 2014

`

(Agency Book)

CONTENTS

Applied Mathematics-I [Semester I]

Applied Mathematics-II [Semester II]

Mathematics III [Semester III]

Semester IV Numerical Analysis (Including Illustrated Programs)

• Successive Differentiation, Expansion of Functions andApproximation • Convergence and Divergence of Infinite Series,Conditional and Absolute Convergence • Asymptotes and CurveTracing • Curvature and Radius of Curvature • Properties of DefiniteIntegrals and Reduction Formulae • Applications of Integration—Area,Length, Volume, Surface Area, and Beta, Gamma Functions • Matrices,Determinants, Hermitian and Skew-Hermitian Matrices, Inverse andRank of Matrix • Linear Transformations, Solution of General Systemof Equations, Eigen Values, Eigen Vectors, Diagonalizing a Matrix, etc.• Ordinary Differential Equations of Order One, Linear, Reducible toLinear, Exact and Reducible to Exact Form • Linear DifferentialEquations of Higher Order, Method of Variation of Parameters andApplications • Bessel’s Differential Equation and Legendre’sDifferential Equation

• Partial Differentiation, Euler’s Theorem, Change of Variables• Expansion of Functions of Two Variables,Approximations, Jacobians,Maxima and Minima • Partial Differential Equations—Formation,Solution of First Order Equations • Laplace Transformation, InverseTransformation Properties and Convolution • Applications of LaplaceTransform—Solving Differential Equations, Unit Step Function andImpulse Function • Complex Functions, Complex Number System,Differentiation and Analyticity, Conformal and Bilinear Mapping• Complex Integration—Taylor and Laurent’s Series, Residue Theorem,Evaluation of Real Integrals • Multiple Integrals—Double and TripleIntegrals • Vector Differentiation, Gradient, Divergence and Curl •Vector Integration, Line Integral, Surface Integral, Stoke’s Theoremand Gauss’s Theorem.

• Fourier Series and Harmonic Analysis • Fourier Transform and itsApplications • Ztransformation and Solution of Difference Equations• Numerical Solution of Equations • Finite Differences, DividedDifferences and Interpolation • Numerical Differentiation andNumerical Integration • Numerical Solution of Ordinary DifferentialEquations.

• Partial Differential Equations of Higher Order and Applications• Probability Theory • Probability Distributions: Binomial, Poisson andNormal Distribution • Curve Fitting – Method of Least Squares,Correlation and Regression • Sampling and Sampling Distributions• Linear Programming • Illustrative Programs of Standard NumericalMethods In C/C++ • Appendix • Answers and Hints to the Problems inExercises • Previous Examinations Question Papers of GGSIPUniversity, Delhi.

By

Pratibha MishraRuchi Mishra

Dr. V.P. MishraMohit Mishra


POLYTECHNIC BOOKSA.M.I.E. BOOKS

Fundamentals of

DESIGN ANDMANUFACTURING

CONTENTS• Basics of Design • Design Concept and its Evaluation • Design forManufacturing and Assembly • Reliability, Robust Design,Communicating the Design, Design Checks, Standardization and SizeRanges • Casting (Foundry) • Mechanical Working of Metals • MetalCutting • Basic Machining Operations • Grinding and Surface FinishingProcesses • Unconventional Machining Processes • Welding • Need forIntegration • Group Technology, Cellular Manufacturing and FlexibleManufacturing System • Robotics •Automated Guided Vehicles System• Product and Process Design for Integration (Concurrent Engineering)• Objective Type Questions • Model Question Papers • Index.

By

Dr. Sunita Rattan

?SOCIETY ANDENVIRONMENT

CONTENTS

Part-I: Society

Part-II: Environment

Part-III: General Knowledge

• Societal Structure and Dynamics • Development Processes• TechnologyAssessment.

• Ecosystems • Environmental Degradation • Waste Management• Sustainable Development • Environmental Legislation and Issues.

• General Knowledge • Model Question Papers • Index.

CONTENTS• Water Technology • Fuels • Chemical Bonding-I • Chemical Bonding-II • Coordination Compounds • Electrochemistry • Corrosion and itsControl • Spectroscopic Method of Analysis-I • Spectroscopic Methodof Analysis-II • Catalysis • Polymers • Composites • InorganicsPolymers • Chromatography • Lubricants • Ceramic, Cement,Refractories and Glass • Gaseous State • Thermochemistry • Solutions•The Phase Rule • Chemical Kinetics • Fundamentals of OrganicMechanism • Name Reactions • Stereo Chemistry • Photochemistry• Solid State Chemistry • Liquid Crystals • OrganometallicsCompounds • Transition Elements • Environmental Pollution-I• Environmental Pollution-II • Green Chemistry and its Application• Index.

CONTENTSCOMPUTINGAND

INFORMATICS

• Water Technology • Fuels • Instrumental Analysis-I • InstrumentalAnalysis-II • Corrosion and its Control • Lubricants • Experiments•Appendices • Examination Papers • Index.

By

R.K. Rajput

MATERIAL SCIENCEAND

ENGINEERING

Size : 20 × 30/8Pages : 175 Approx.ISBN : 81-85749-68-X


`

CONTENTS



`

GroupA

Group B

• Structure of Atoms and Molecules • Introduction to Materials • MetalsandAlloys • Deformation, Strengthening of Metals and FailureAnalysis• Diffusion in Solids.

• Heat Treatment • Ceramic Materials • Electrical and ElectronicMaterials • Magnetic Materials • Polymers, Elastomers and Composites• Thermal Properties • Electron Theory of Metals • Short AnswerQuestions • Objective Type Questions withAnswers • Index.

CONTENTS• Programming Languages • Body of Program in C • C++ • ProblemSolving by Computer and Pascal • Information System for DecisionMaking • Data Management and Database Management Technology• Office Automation System-LAN, WAN • Email and Electronic DataInterchange (EDI) • TCP/ IP and Client Server • Information System forBusiness and Strategic Management • Computers and Boolean Algebra• Introduction of Logic Gates and Flip Flop • Components of ComputerHardware • Software • Operating Systems • Appendix • Glossary ofTerms • PreviousYear Question Paper with Solution • Index.Size : 20 × 26/8

Pages : 550 Approx.ISBN : 978-81-88458-86-8

Price: 225/-`

ByPravin Kumar

M. Ramaswamy

ByDr. Suresh K.

Dhameja

ByVivek Srivastava

Dr. M. Ramaswamy


Price: 165/-`


Size : 23 × 36/8Pages : 800 Approx.ISBN 13: 978-81-85749-73-0ISBN 10 : 81-85749-73-6


`



`



`




• DC Basics and Networks andElectromagnetic Theory • AC Basics and Networks • DC Machines • ACMachines • Electrical Engineering Materials • Electrical Machine Design• Electrical Installation and Wiring • Electrical Power Generation andEconomic Considerations • Transmission and Distribution of ElectricalPower • Switchgear and Protection • Electrical Energy Utilisation andElectric Traction

• Electronic Components and Devices• Analog Electronics • Industrial and Power Electronics • DigitalElectronics • Microprocessors • Communication System.

• Electronics and Electrical Measurements and Instruments • Electricaland Electronic Instrumentation • Control Systems • Model Test Papers• References.


Price 575/-Reprint: 2015

`

CONTENTS• Network Theory • Electromagnetic Field Theory • Signals and Systems• Materials and Components • Electronic Devices and Components• Analog Electronic Circuits • Power Electronics • Digital ElectronicCircuits • Electronic and Electrical Measurements and Instruments• Electrical and Electronics Instrumentation • Control Systems• Communication Systems • Microwave Engineering • ComputerEngineering • Model Question Test Papers • References.

By

J. B. Gupta

(With About 15,000 ObjectiveType Questions & Answers)


CONTENTS• Fluid Mechanics • Stoichiometry • Mechanical Operations • ChemicalProcess Industries • Petroleum Refinery Engineering • FertilizerTechnology • Heat Transfer • Mass Transfer • Process Control andInstrumentation • Chemical Engineering Thermodynamics • ChemicalReaction Engineering and Reactor Design • Fuels and Combustion• Material of Construction • Process Equipment and Plant Design• Chemical Engineering Plant Economics • Nuclear Power Engineering• Furnace Technology • Refractory Technology • Environmental andIndustrial Pollution • Polymer Technology and Processing • ChemicalHazards and Safety • PreviousYears Examination Papers.

By

J. B. Gupta




• DC Basics and Networks andElectromagnetic Theory • AC Basics and Networks • DC Machines• AC Machines • Electrical Engineering Materials • Electrical MachineDesign • Electrical Installation and Wiring • Electrical Power Generationand Economic Considerations • Transmission and Distribution ofElectrical Power • Switchgear and Protection • Electrical EnergyUtilization and Electric Traction

• Electronic Components and Devices • AnalogElectronics • Industrial and Power Electronics • Digital Electronics• Microprocessors • Communication System

• Electronicand Electrical Measurements and Instruments • Electrical and ElectronicInstrumentation • Control Systems • Model Test Papers • References

By

J. B. Gupta

Question Bank in


Question Bank in

CHEMICALENGINEERING



By

Smriti SrivastavaVipin K. Mehta

OBJECTIVE TYPE BOOKS


ELECTRONICSAND


Two Colours Edition





`


Price: 425/-

Reprint: 2015

`


Price: 495/-

Reprint: 2014

`

CONTENTS• Engineering Mechanics • Strength of Materials • Theory of Mechanismsand Machines • General Metallurgy and Engineering Materials • MachineDesign • Production Engineering • Industrial Engineering and ProductManagement • Measurements and Instrumentation • BasicThermodynamics • Heat Transfer • Refrigeration and Air-Conditioning• Steam Generation, Engines and Turbines • IC Engines and AutomobilesEngineering • Compressors, Gas Turbines and Jet Propulsion • NuclearPower Plant • Fluid Mechanics and Hydraulic Machines • Assertion andReasoning • Practice Papers.

Size: 23× 36/8Pages: 525 Approx.ISBN 13: 978-81-85749-38-9ISBN 10: 81-85749-38-8


`

CONTENTS• Introduction to Computers • Computer Architecture and Organization• Data Communication and Networking • Operating System Concepts• Database Management System (DBMS) • Principles of ProgrammingLanguages and System Software • Programming Language and C/C++• Artificial Intelligence • System and Program Development Methodology• Statistical Techniques in Computer Science • Digital Electronic Concepts• Introduction to JAVA • Mathematical Preliminaries • Computer GraphicsPrinciples • Automata Theory and Compiler Design • Data Structures andAlgorithms • Software Engineering Principles • Internet and World WideWeb • Model Paper for GATE 2014 with Solutions.

By

Pankaj SharmaNitin Upadhyay

R. BalagurswamyM. Ramaswamy

(With More than 12,000Objective Type Questions with Answers)

CONTENTS• Network Theory • Electromagnetic Field Theory • Signals and Systems• Materials and Components • Electronic Devices and Components• Analog Electronic Circuits • Power Electronics • Digital ElectronicCircuits • Electronic and Electrical Measurements and Instruments• Electrical and Electronics Instrumentation • Control Systems• Communication Systems • Microwave Engineering • ComputerEngineering • Model Question Papers • References.

By

Dr. B. R. GuptaVandana Singhal

CONTENTS• Electrical and Electronic Materials and Components • PhysicalElectronics, Electronic Devices and ICs • Signals and Systems • NetworkTheory • Electromagnetic Theory • Electrical and ElectronicsInstruments • Analog Electronic Circuits • Power Electronics • DigitalElectronics • Control Systems • Microprocessors and Computers• Communication Systems • Microwave Engineering • Model TestPaper (I & II) • Bibliography.

By

Dr. D. S. Kumar

Question Bank in

ELECTRONICS ANDCOMMUNICATION

ENGINEERING

By

J. B. Gupta


Question Bank in


ENGINEERING

Question Bank in

COMPUTERSCIENCE


(Objective)

(With More than 12,000Objective Type Questions with Answers)




`



`



`

CONTENTS• Surveying • Building Materials • Building Construction• Estimating and Costing • Strength of Materials • Applied Mechanics• Fluid Mechanics and Hydraulic Machines • Soil Mechanics andFoundation Engineering • Hydrology and Water Resources Engineering• Structural Analysis • Design of R.C.C. and Masonry Structures • Designof Steel Structures • Transportation Engineering-I (Railway)• Transportation Engineering-II (Highways, Airports and Harbours)• Environmental Engineering-I (Water Supply) • EnvironmentalEngineering-II (Sewerage Treatment and Disposal and Air and WaterPollution and Control) • Construction Practice, Planning and Management• Computer Programming.

(For ES, CS, GATE, AMIE, SCSE, CTABodies and Public Undertaking Test &

Interviews, Admissions and RecruitmentTest)

CONTENTS• Materials and Components • Electronic Devices and Circuits • NetworkAnalysis and Synthesis • Electromagnetic Field Theory (EMFT)• Electronic Measurements and Instrumentation • Power Electronics• Analog Electronics • Digital Electronics • Automatic Control Systems• Communication Systems (Analog and Digital) • Radio Receivers• Microwave Communication • Satelli te Communication• Microprocessors • Signals and Systems • Solved Model Papers.

By

V. S. MurthyR. Sood

CONTENTS• Surveying • Building Materials • Building Construction• Estimating and Costing • Strength of Materials • Applied Mechanics• Fluid Mechanics and Hydraulic Machines • Soil Mechanics andFoundation Engineering • Hydrology and Water Resources Engineering• Structural Analysis • Design of R.C.C. and Masonry Structures• Design of Steel Structures • Transportation Engineering-I (Railway)• Transportation Engineering-II (Highways, Airports andHarbours) • Environmental Engineering-I (Water Supply)• Environmental Engineering-II (Sewerage Treatment and Disposal andAir and Water Pollution and Control) • Construction Practice, Planningand Management • Computer Programming.

By

V. S. MurthyR. Sood

By

Dr. Sanjay Sharma


Question Bank in

CIVILENGINEERING

Objectives in

CIVILENGINEERING

Question Bank in


ENGINEERING

(With More than 15,000Objective Type Questions and Answers)




`



`

Size: 23 × 36/8Pages:ISBN:

Price:First Edition: 2014

`

Size: 23 × 36/8Pages:ISBN:

Price:First Edition: 2014

`By

Sadhu Singh

(10,000 Plus Objective Questions withAnswers)

CONTENTSUnit-I: Networks, Signals and Systems & Electromagnetics

Unit-II: Electronic Devices andAnalog Circuits

Unit-III: Digital Circuits and Microprocessors

Unit-IV: Control Systems and Communications

Unit-V: Engineering Mathematics

Unit-VI: GeneralAptitude

• Networks • Signals and Systems • Electromagnetics

• Electronic Devices •Analog Circuits

• Digital Circuits • Microprocessors

• Control Systems • Communications

• Engineering Mathematics

• VerbalAbility • NumericalAbility• Model Test Papers • GATE-2013 Question Paper.

By

J. B. Gupta

CONTENTSUnit-I: Electric Circuits and Fields & Signals and Systems:

Unit-II: Electrical Machines:Unit-III: Power Systems:

Unit-IV: Electrical & Electronic Measurements and Control Systems:

Unit-V: Analog and Digital Electronics & Power Electronics andDrives:

Unit-VI: Engineering Mathematics:Unit-VII: GeneralAptitude (GA):

• ElectricCircuits • Electromagnetic Field Theory • Signals and Systems

• DC Machines •AC Machines• Electrical Power Generation and Economic

Considerations • Transmission and Distribution of Electrical Power• Switchgear and Protection

• Electrical and Electronic Measurements • Control Systems

• Analog Electronics • Digital Circuits • Microprocessors • PowerElectronics and Drives

• Engineering Mathematics• VerbalAbility • NumericalAbility

• Model Test Papers • GATE-2013 Question Paper.

By

A. K. Upadhyay

By

J. B. Gupta

GATE BOOKS 2015

(8,000 Plus Objective Questionswith Answers)

GATE 2015ELECTRONICS ANDCOMMUNICATION

ENGINEERING

GATE 2015ELECTRICAL

ENGINEERING

GATE 2015MECHANICALENGINEERING

GATE 2015CIVIL

ENGINEERING

GATE 2015CIVIL

ENGINEERING

GATE 2015MECHANICALENGINEERING

Releasing Shortly

Releasing Shortly


ABOUT OUR AUTHORS

Each one of our authors have an excellent academic background and are high achievers having

various degrees and medals. The profound knowledge and years of experience of our authors clearly

reflect in their books. Our authors are scattered all over India and have always been a part of various

Intercollegiate seminars, councils and interactions in national and international levels. They are the

assets of our publication and the learning community. An increasing number of authors with proven

qualities and records are joining our publication and thereby enhancing our publication. Our sincere

thanks to the existing authors and a very warm welcome to the newcomers.

We would like to bring to your notice that we follow a policy of selling our books mainly through the

Book Distributors scattered in all States and Union Territories of India. Their list is included in the

pages 197 to 202 of our catalogue. Therefore the Librarians and Departments can get their supply

from them. In case of any difficulty in getting our books from the distributors, please ask the

Librarians and Department teachers to send their order directly to us. We shall send your books

either to the distributor or directly to you as per your request.

With Esteemed & Regards

S.K. Kataria & Sons

Complimentary copies of the books in this catalogue are available to the teachers who wish to

consider the books for possible course adoption on formal request.

To request a complimentary copy, write to our Delhi office only. Please include your position, the

course title and approximate enrollment, text currently in use. Please note that the complimentary

copies will not be sent without this information. It is also necessary to send the syllabus of your

university for the course you are requesting a specimen copy.

All Prices are subject to change without notice. Prices are established in India and in Indian Rupees.

To the Book Distributors, Librarians and Department Staff

Complimentary Copies

Prices

To Contact us:

Address:

4885/109, Prakash Mahal, Dr. Subhash Bhargav Lane,

Opp. Delhi Medical Association, Daryaganj, New Delhi - 110002

Phones: +91-11-23243489, 23269324 • Telefax: +91-11-23243489

H.O.: Opp. Clock Tower, Ludhiana (PB.) • Phones: 0161-2726401

E-mail: [email protected] • [email protected]

Website: www.skkatariaandsons.com

M/s. S. K. Kataria & Sons

S.K. KATARIA & SONS®

(An ISO 9001-2008 COMPANY)4885/109, Prakash Mahal, Dr. Subhash Bhargav Lane,

Opposite Delhi Medical Association,Darya Ganj, New Delhi-110002 (India)

Ph.: 23243489, 23269324, Fax: 011-23243489e-mail : [email protected], [email protected]

website: www.skkatariaandsons.com

Make youTechnically, Academically Strong

PUBLISHERS

OUR OUTSTANDING PUBLICATIONS

Books also available at:

final catalogue 2015 ipu

Documents

mechanical engineering

electrical engineering

kataria sonsan iso

towrite books

books providewings

delhi medical association

new authorsms

companynew delhi