filly & foal 2019/20 your bar hire · 1.2 m wide x 3.1 m long x 1.1m high this bar is ideal for...
TRANSCRIPT
Your BarHire
FILLY & FOAL 2019/20
Contents
About This Guide
'Filly & Foal'
3 m wide x 5 m long x 3m high this barcan be manoeuvred easily to fit into anydesirable area.
BAR SIZE
The electrical requirements for this barare x2 16 amp single phase supplies, wehave all the necessary electricaldistribution boxes and cable splitters.
ELECTRICAL REQUIREMENTS
Ideally an area of 5m x 5m is desirable forthis bar, this allows us some back ofhouse area for bar stock.
AREA REQUIRED
It is desirable that this bar is setup on flatlevel ground, this enables safe service forour staff and your guests. Unlevelledground can also be accommodated.
OTHER REQUIREMENTS
'Old Remus'
1.2 m wide x 3.1 m long x 1.1m high this baris ideal for both indoor and outdoor areas.
BAR SIZE
The electrical requirements for this barare x1 240v 13amp single phase supply,we have all the necessary electricaldistribution boxes and cable splitters.
ELECTRICAL REQUIREMENTS
Ideally an area of 3.5m x 3.5m is desirablefor this bar..
AREA REQUIRED
It is desirable that this bar is setup on flatlevel ground, this enables safe service forour staff and your guests. Unlevelledground can also be accommodated.
OTHER REQUIREMENTS
'The Gatsby'
1.5 m wide x 2.5 m long x 1.1 m high thisbar is ideal for smaller events andarrival/reception drinks or cocktails.
BAR SIZE
The electrical requirements for this barare x1 240v 13amp single phase supply,we have all the necessary electricaldistribution boxes and cable splitters.
ELECTRICAL REQUIREMENTS
Ideally an area of 3 m x 3 m is desirablefor this bar, this allows us some back ofhouse area for bar stock.
AREA REQUIRED
It is desirable that this bar is setup on flatlevel ground, this enables safe service forour staff and your guests. Unlevelledground can also be accommodated.
OTHER REQUIREMENTS
'Reclaimed Pallet Bars'
1.4 m wide x 2.4 m long x 1.2 m high thisbar comes is 1200mm sections andmultiple sections can be used.
BAR SIZE
The electrical requirements for this barare x1 240v 13amp single phase supply,we have all the necessary electricaldistribution boxes and cable splitters.
ELECTRICAL REQUIREMENTS
Ideally an area of 3 m x 3 m is desirablefor this bar, this allows us some back ofhouse area for bar stock.
AREA REQUIRED
It is desirable that this bar is setup on flatlevel ground, this enables safe service forour staff and your guests. Unlevelledground can also be accommodated.
OTHER REQUIREMENTS
'Stretch Tents'
6.5 m deep x 10 m wide, please note thistent cannot be used in high or excessivewinds for safety reasons
STRETCH TENT SIZE
There are no electrical requirements forour stretch tents, you are welcome todress these with any lighting of yourchoice, all cable must conform toHOR7NF electrical standards.
ELECTRICAL REQUIREMENTS
An area of 11.9 m deep x 15.4 m wide isneeded for this stretch tent, this areamust be flat and suitable ground.
AREA REQUIRED
It is desirable that this tent is setup on flatlevel ground, this enables safe use for ourstaff and your guests. Unlevelled groundcannot be accommodated. Please notethis cannot be used in high winds.
OTHER REQUIREMENTS
EnvironmentalPolicy
Contact InfoHOW TO GET IN TOUCH