field equipment lending library - cuny bpl...field equipment lending library advancing...
TRANSCRIPT
FIELD EQUIPMENT LENDING LIBRARY
www.cunybpl.org
Advancing energy-efficient building practices through research, outreach, and training.
BP Lab is excited to announce the establishment of our new Field Equipment Lending Library, funded in large part with the generous support of NYSERDA, the NYC DCAS Energy Management Division and the NYC Department of Education’s Division of School Facilities. In line with our mission, this new resource is available to industry professionals, current students and alumni of our energy management courses, and workforce development organizations to help advance high-performance building operations and practices in the existing commercial and public real estate markets. The new library is stocked with a full range of field equipment that can be used to test, measure and diagnose building system operations and facilitate ongoing commissioning, building re-tuning and retrofit projects. Available Lending Library equipment includes HOBO® data loggers, CO2 meters, contact and infrared thermometers, ultrasonic non-intrusive flow meters, bolometers and Chroma meters. In addition, we have a variety of simulation and diagnostic software that can be used onsite at BP Lab.
www.cunybpl.org
Advancing energy-efficient building practices through research, outreach, and training.
Table of Contents
Thermal Image Cameras Data Loggers Current Sensors Light Meters Hot Wire Anemometer
www.cunybpl.org
Advancing energy-efficient building practices through research, outreach, and training.
Model: Fluke - Tis Model: Flir i7
Thermal Image Camera
Thermal Image Camera
Great tool for: • Building inspector, electrician, energy auditor, window
installer.
It can be used to find: • Moisture intrusion, detect energy loss/missing insulation, and
many basic electrical connection and load problems.
www.cunybpl.org
THERMAL IMAGE CAMERAS: USES AND PROBLEMS THAT
CAN BE IDENTIFIED
Electrical Panel Overheated Motor
Clear Referencing of Air Leaks Wet Insulation
Three Wire Problem Single Phase Transformer
Motor on/off Data Logger Model: UX90-004
Light on/off Data Logger Model: UX90-002
Data Loggers
Motor on/off Data Logger - UX90-004
The UX90-004 standalone data logger monitors: • A motor’s on and off conditions, • Giving a record of when a motor is on, when it is off, and its
run time.
It can be used to verify motor conditions, such as: • Ensuring that they’re off at night, • Reveal problems with control logic, like having hot and
chilled water pumps running simultaneously.
Motor on/off Data Logger - UX90-004
www.cunybpl.org
Motor on/off Data Logger - UX90-004
Motor on/off Data logger Placement • The magnets in the back of the logger allows for a easy
attachment and placement on motors • Other options are Velcro and sticky stickers
Quick Live Demonstration
Motor on/off Data Logger - UX90-004
Light on/off Data Logger - UX90-002
The UX90-002 standalone data logger monitors • Indoor light changes with an internal sensor, • Records light on and off conditions.
It’s ideal for: • building energy audits • light usage analysis.
Light on/off Data Logger - UX90-002
www.cunybpl.org
Light on/off Data Logger - UX90-002
Quick Live Demonstration
Light on/off Data Logger - UX90-002
Temperature and Relative Humidity Data Logger Model: U10-003
Temp/RH/Light/External Data Logger Model: U12-012
Data Loggers
4 External Channel Data Logger Model: U12-006
Temp/RH/2External Data Logger Model: ZW-005
15 Channel Smart Sensor Cellular Data Logger Model: U30-GSM
Temperature and Relative Humidity Data Logger Model: U10-003
Temp/RH/Light/External Data Logger Model: U12-012
Data Loggers
4 External Channel Data Logger Model: U12-006
The U10-003 standalone data logger • Records Temperature and Relative humidity with an internal
sensor
The U12-006 standalone data logger • Uses its input jacks for External sensors to record and store
data within the logger • Can log 4 different External sensors at the same time
The U12-012 standalone data logger • Records Temperature/RH/Light with an internal sensor • Uses the input jack for an External sensor connection
U10-003 U12-006 U12-012
www.cunybpl.org
Data Loggers
Temp/RH/2External Data Logger Model: ZW-005
15 Channel Smart Sensor Cellular Data Logger Model: U30-GSM
The ZW-005 is a Wireless data logger • Records Temperature and Relative Humidity with an internal
sensor • It’s 2 External jacks allows it to connect to external sensors
compatible with the logger for recording and storing data • Note: This logger requires a ZW-Receiver and ZW-Router
logger to communicate the data back to the PC
ZW-005 Temp/RH/2External
www.cunybpl.org
ZW-005 Temp/RH/2External
www.cunybpl.org
ZW-005 Temp/RH/2External
www.cunybpl.org
The U30-GSM is a web-based monitoring system • It’s 15 Channel smart sensor plug-in allows it to be a data
logging system for a broad range of energy and weather monitoring applications.
U30-GSM 15Ch. Cellular Data
www.cunybpl.org
U30-GSM 15Ch. Cellular Data
www.cunybpl.org
Energy Data Collection Weather Station
CTV-A 0-20 AMP Split Core
Current Sensors
CTV-B 0-50 AMP Split Core
CTV-E 0-600 Amp Split Core
These devices are mounted around a current-carrying wire to measure AMPERAGE.
Used to access the power usage of various types of equipment
including variable frequency drives and switched power sources
For use with U12 series and ZW series data logger with external input channels to store the data
www.cunybpl.org
Current Sensors
www.cunybpl.org
Current Sensors
Fan Fan wire
CTV-B 0-50 Amps
U12-006 External Logger
box
Quick Live Demonstration
Light on/off Data Logger - UX90-002
Digital Light Meter Model: LM-100
Light Meters
Is a handheld device that measures: • illumination in footcandles (lm/ft2) or lux • from fluorescent, metal halide, high-pressure sodium or
incandescent sources.
Is the standard unit used in the lighting industry. Used in different building types: • (retail stores, office spaces, schools, hospitals, and homes) • specific areas within buildings (rooms, hallways, and stairs) • vary in their recommended lighting levels.
www.cunybpl.org
Light Meters
Light Meters
Light Meters
Model: AVM430
Hot Wire Anemometer
Hot Wire Anemometer
A handheld device that measures: • air velocity • flow • temperature.
It’s ideal applications include: • HVAC system performance
Commissioning • plant maintenance • critical environment certification • duct traverses.
www.cunybpl.org
Hot Wire Anemometer
Quick Live Demonstration
Hot Wire Anemometer
www.cunybpl.org
Advancing energy-efficient building practices through research, outreach, and training.
How to Borrow from the Field Equipment Lending Library
Head to the BPL website: http://www.cunybpl.org
On the “Resources” tab at the top of the website, locate the “Field Equipment Lending Library” link
Confirm that the equipment you would like to borrow is within our inventory list
Email to set-up a reservation for the equipment
www.cunybpl.org
Advancing energy-efficient building practices through research, outreach, and training.
Contact information Website: http://www.cunybpl.org
Honey Berk, Technology Specialist
Felix Rodriguez, Equipment Specialist Building Performance Lab
CUNY Institute for Urban Systems [email protected]