ffh technical drawing i
TRANSCRIPT
TECHNICAL DRAWING
Federico Fernndez HerreraENGLISH BILINGUAL 1 E.S.O.VISUAL AND PLASTIC EDUCATIONDIDACTIC UNIT # 5
Index:
Drawing materials.
Drawing tools and how to use them.
Parallels and perpendiculars.
Angles.
Drawing materials
PaperPaper is made of cellulose that is obtained from trees
The paper size that we use is A4 . Sizes: 297x210 mm
Pencils and rubbersA pencil has a lead covered with wood. The lead is made with graphite and clay (the more clay it contains the harder the lead will be). We use letter H for hard pencils and letter B for soft ones.
Erasers are made of rubber, they absorb graphite and erase it.
Very hardHardMediumSoftVery soft6H5H4H3H2HHHBB2B3B4B5B6B
Drawing tools and how to use them
CompassIt is used for drawing circles,angles and transfering measures
THE RULERIt is a precision tool that allows you to measure and transfer distances.
TRIANGULAR SET SQUARE A set square is a tool for drawing parallel and perpendicular lines and for getting angles. There are 2 types of triangular set squares
A 45 degreeA 60 degree
Parallels and perpendiculars
Parallels in vertical:Parallels in horizontal:
How to use drawing tools
Drawing angles: we can get 15, 30, 45, 60, 75, 90, 120, 135angles by combining the 30, 45, 60 and the 90 angles from the set squares
You can get 45, 75, 90, 120 angles combining the set squares
ACTIVITIES:
1st: Draw the set squares in your notebook as you can see them in both positions
2nd: Draw a chessboard using the set square. The separation between squares is 2 cm!
3rd: Drawing angles exercise: you have to obtain, 45, 75, 90, 120 angles combining the set squares