festo modular production system (festo mps)€¦ · festo modular production system (festo mps)...
TRANSCRIPT
FESTO Modular Production
System
(FESTO MPS)
Kleanthis ThramboulidisSoftware Engineering Group
Electrical & Computer Engineering
University of Patras, 26500 Patras, Greece
11th IEEE Conference on Emerging Technologies and Factory Automation,
19-22 Sept., Prague, (ETFA’06).
FESTO MPS
©K.Thramboulidis ETFA 06 2
Description - I
• Each one of the three units that constitute the
system i.e., distribution unit, test unit and
processing unit, is further defined as an
aggregation of other mechanical units.
• The distribution unit, which is composed of a
©K.Thramboulidis Festo MPS 3
• The distribution unit, which is composed of a
pneumatic feeder and a converter, forwards
cylindrical work pieces from the Stack to the
Testing unit. The testing unit is composed of the
detector, the elevator and the shift out cylinder.
Description - II
• The detection unit performs checks on work pieces
for height, material type and colour. Work pieces
that successfully pass this check are forwarded to
the rotating disk of the
• processing unit, where the drilling of the work piece
©K.Thramboulidis Festo MPS 4
• processing unit, where the drilling of the work piece
is performed as the primary processing of this MPS.
• The result of the drilling operation is next checked
by the checking machine and the work piece is
forwarded for further processing to another
mechanical unit.
Festo MPS: Environmental modeling
Operator
Festo MPS Control System
Festo MPS
Control application
©K.Thramboulidis ETFA 06 5
workpiece
Producer
Legal workpiece
Consumer
Illegal workpiece
Consumer
Operator
Festo MPS
Mechanical Process
Communication & Processing
System
FESTO MPS – The mechanical Process
©K.Thramboulidis ETFA 06 6
FESTO MPS – Schematic diagram
©K.Thramboulidis ETFA 06 7
Feeder
©K.Thramboulidis ETFA 06 8
Converter
©K.Thramboulidis ETFA 06 9
Testing Unit
• Position Β
– Color and material check.
• Up Position
– Workpiece height check.
©K.Thramboulidis ETFA 06 10
Testing Unit
©K.Thramboulidis ETFA 06 11
Drilling Machine and rotating disk
©K.Thramboulidis ETFA 06 12
Rotating Disk
©K.Thramboulidis ETFA 06 13
Drilling Machine
©K.Thramboulidis ETFA 06 14
Checking Machine
©K.Thramboulidis ETFA 06 15
Warehouse Unit
©K.Thramboulidis ETFA 06 16