Maximum recovery of recyclable materials - IMRO - Europe´s conveying and sorting experts

IMRO Non-ferrous Separator

IMRO MagnetSort

NEW NEW IMRO

RCSX D NEO

NEW NEW IIMMRROO

O

EVEN STRONGER • EVEN MOR

E EFF

ECTI

VE

We look after your small parts - IMRO increases your recycling outputIMRO Maschinenbau specialises in separation technology, conveyor technology and recycling plants. Recover valuable materials successfully with high tech dry sorting, separating and conveying systems. The IMRO Non-ferrous Separator is the flagship of IMRO separation technology, used where high recovery quotas and high purity levels are required.

Maximum recovery of recyclable materials - IMRO - Europe´s conveying and sorting experts

Aluminium Recycling

Schredder Scrap Recycling

Slag Recycling

E-Waste Recycling

IMRO Non-ferrous Separator: NE Metals Recovery or Materials Purification

High-performance IMRO machines are primarily utilised for the recovery of household waste, shredder material, white goods, wood, plastics, glass, slag, bottom ash and e-waste.

The divider is horizontally and vertically infinitely variable. A rotary splitter can be delivered instead of a divider.

RCSX

Engineering changes reserved

Infinitely variablepole system 0 - 20° (Patent)

Removable shell ring for easy replace-ment of GFK drum shell (Patent)

Infinitely variable divider

Lighting in the discharge chute

Several types of conveyor beltcleaning systems

Special separator version for slag recycling prevents frictional corrosion Separate bearing Lubricated divider with protective bellows Drive motor with TorqLOC® hollow shaft mounting system

Other manufacturers use:• 38 or fewer poles• Small rotorTo prevent burn-through of ferrous particles, other manufactu-rers' concentric rotors include ceramic-lined drum shells which exponentially reduce magnetic strength and separation power, increasing the gap between material and magnet blocks.

Ferrous parts are attracted by the circulating magnetic field, causing high wear and tear on belt and drum shell.

IMRO RCSX D eccentric rotor high tech advantages:• 40 poles comprising of the strongest magnet material• Ultra large diameter on inductor pole drum• The highest magnetic mass• Frequency 1.4 kHz

Ferrous parts cannot be attracted bythe magnetic field

In a concentric rotor, non-ferrous particles are influenced by the magnetic field far too early in the process which prevents optimal separation.

No adjustment is possible at the concentric system and this means that there is no influence on the parabola of the non-ferrous parts, especially on copper wires and heavy metals.

With the IMRO eccentric rotor system, the zenith of the parabola is achieved by adjusting the angle of attack of the inductor drum from 0 to 20 degrees. This is a crucial advantage when compared to a concentric system with a fixed angle of attack. With an infinitely variable pole drum position between0 to 20 degrees, the point of separation is maximized.

The truth about Eddy Current Systems made by IMRO

IMRO uses Eddy Current systems to combine all key variables, ensuring reliable and efficient separation technology of non-ferrous particles.This is how it is achieved:

The pole drum system is infinitely variable from 0 to 20 degrees (IMRO Patent).

IMRO's electronically operated, infinitely variable magnet systems and infinitely variable dividers are available add-ons.

Magnetic zone

IMRO

Magnetic zone

Others

8° (for example)

Al

Heavy metals

InertIMRO

0° Zenith

Non ferrous

Inert

Others

We produce Non-ferrous Separators with different types of rotors. Stronger magnets and lower pole changing frequencies are used for coarser grain sizes than for those used to recycle material comprising finer grain sizes. Optimal applications can be engineered for any combination of number and arrangement of neodymium magnets and pole system rotation speeds.

The IMRO RCSX Series – Sound Technology for more Efficiency

Maximum recovery of recyclable materials - IMRO - Europe´s conveying and sorting experts

IMRO non-ferrous separators comprise a thin modern fibre-reinforced drum shell, so the material is moved closer to the magnet system, optimizing the interaction with the magnetic field.

The machines are equipped with electronic controls. As well as converting the frequency of belt and rotor controls, other frequency converters can be added; for example, to control a material feed.

IMRO Non-ferrous Separator has optional IMRO add-ons:

Conveyor technology Non-ferrous pre-separation

Material feed with vibrating chuteInfeed and outfeed conveyor

Manufactured according to EU Directive 2006/42/EG

IMRO Non-ferrous Separator RCSX

RCSX EFinest grain size separator for non-ferrous metals.Max. speed/frequency 4000 rpm / 1.33 kHz

RCSX DFine grain size separator for non-ferrous metals.Max. speed/frequency 3500 rpm / 1.16 kHz

RCSX B/RCSX CMedium grain size separator for sorting and separatingmany metalliferous valuable materials

RCSX D NEO Secondary Separation for CascadeFinest grain size separator for non-ferrous metals.Max. speed/frequency 3800 rpm / 1.26 kHz

NEW

IMRO Maschinenbau GmbH . www.imro-maschinenbau.de

FERCELL Engineering Ltd (UK Distributors)Old Mill Lane, Aylesford, Kent, ME20 7DTPhone: +44 (0) 1622 791414info@fercell.com . www.fercell.com

IMRO TEST CENTREOver 25 Years' Experience in Recycling

Technology always fulfils demands. Would you like to know which valuable materials and impurities are contained in your material flow? Then bring it along and have it analysed in our IMRO Test Centre. Our 25 years' expertise and experience in the recycling industry guarantees we will optimise your recycling processes.

Equipped with cutting-edge technology, IMRO Test Centre staff makes sure you are taking the first step in achieving maximum economy and value recovery. Let us demonstrate the performance and the coordinated interaction between all of the IMRO separator machinery.

Your advantage: Fast results and efficient plants and equipment, plus added value and immediate profitability in all recycling processes.

IMRO increases your recycling output - IMRO the Interface Specialist

RCSX

201

6/01

neum

annu

ndpa

rtner.

net

Maximum recovery of recyclable materials - IMRO - Europe´s conveying and sorting experts