fb series - müggler engineering aps- ekspert i ... · y-axis stroke belt gear taper magazine ......
TRANSCRIPT
FB SeriesHYUNDAI WIA Vertical Machining Center
The Vertical Machining Center FB Series, designed by Hyundai WIA with years of expertise and the latest technology, is a heavy duty cutting machine with high precision and productivity.
Technical Leader
510/20 600/23.6 8,000 4,500 4,500 8,000 8,000 8,000 20 24 30 (mm/″) (mm/″)
(287N.m) (730N.m) (901N.m) (512N.m) (532N.m) (657N.m) BT40 BT50 (Tool) (Tool) (Tool)
(211.7lbf.ft) (538.4lbf.ft) (664.5lbf.ft) (377.6lbf.ft) (392.4lbf.ft) (484.6lbf.ft)
Y-AxisStroke Belt Gear Taper Magazine
● ● ○ ● ● ○
● ● ○ ○ ○ ● ● ○
MODEL
F510B
F600B
●:Standard○:Option
High tech Vertical Machining Center for High Precision Heavy Duty Cutting
FB Series● High precision main spindle designed with Angular Contact Ball Bearings
● High power/torque main spindle for superb heavy duty cutting
● Gear driven main spindle for high power and high torque
● Box guideways for exceptional traveling during heavy duty cutting
● Latest Servo ATC for highly efficient tool changing
500(19.6″)
150(5.9″)
70(2.7″)
70(2.7″)
1,060(41.7″)
500(19.6″)
800 kg (1,764 lb)
◉TableSize(X/Y axis) : 1,200/500 mm (47.2″/19.6″)
635(25″)
01 F510B Basic FeaturesExcellent Heavy Duty Cutting Capability & Productivity Vertical Machining Center FB Series
AllAxesBoxGuidewayAll Axes box guideways for efficient traveling for heavy duty cutting.
DoubleAnchoredBallscrewIn order to eliminate thermal growth and increase accuracy, all axes are driven by high precision double anchored ballscrews.
The double anchored and pretensioned design provides outstanding positioning and repeatability with virtually no thermal growth.
DirectlyCoupledServoMotorEach axis is directly connected to a highly reliable digital servo motor to provide high rigidity and minimal thermal displacement.
03
02
01
Table&MachiningArea
04+
05
FB
Ser
ieS
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
01
03
02
BeltTypeSpindle(F510B)The F510B is designed with a belt type spindle. This allows drastic decrease in noise during machining operations and provides easy maintenance.
◉Travel(X/Y/Z axis) : 1,100/510/635 mm (43.3″/20″/25″)
◉SpindleSpeed(rpm) : 8,000 Belt [8,000 Gear] rpm
◉SpindlePowerOutput(Max./Cont.) : 15/15 [15/15] kW (20/20 [20/20] HP)
◉SpindleTorque(Max./Cont.)) : 287/143 [512/375] N.m (211.7/105.5 [377.6/276.6] lbf.ft)
Basic Features
02 F600B Basic FeaturesHigh Speed & Productivity Vertical Machining Center
FB Series
4SlidewayY-AxisStructureThe Y-axis on the F600B is designed with 4 slideways. This reduces the degree of displacement from sagging.
Table&MachiningArea 03
02
01
AllAxesBoxGuidewayBox guideway allows even distribution of force on the guideway surface, resulting in high rigidity and stable feeding. This provides the background for high quality heavy duty cutting.
600(23.6″)
600(23.6″)
150(5.9″)
225(8.5″)
1,150(45.2″)
225(8.5″)
600(23.6″)1,300 kg (2,866 lb)
◉TableSize(X/Y axis) : 1,600/600 mm (63″/23.6″) [When applying JIG - Y-axis : 580 mm(22.8″)]
DoubleAnchoredBallscrewIn order to eliminate thermal growth and increase accuracy, all axes are driven by high precision double anchored ballscrews.
The double anchored and pretensioned design provides outstanding positioning and repeatability with virtually no thermal growth.
DirectlyCoupledServoMotorEach axis is directly connected to a highly reliable digital servo motor to provide high rigidity and minimal thermal displacement.
06+
07
FB
Ser
ieS
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
Basic Features
01
03
02
GearDrivenSpindleF600B is designed with a gear driven spindle which allows high torque at low rpm and stable machining at high rpm.
◉Travel(X/Y/Z axis) : 1,150/600/600 mm (45.3″/23.6″/23.6″)
◉SpindleSpeed(rpm) : 4,500 [4,500] [8,000] [8,000] rpm ◉SpindleDrivingMethod : Gear
◉SpindlePowerOutput(Max./Cont.) : 15/11 [18.5/15] [15/11] [18.5/15] kW (20/15 [24.8/20] [20/15] [24.8/20] HP)
◉SpindleTorque(Max./Cont.) : 730/535 [901/730] [532/390] [657/532] N.m
(538.4/394.6 [664.5/538.4] [392.4/287.6] [484.6/392.4] lbf.ft)
BeltTypeSpindle(F510B)The F510B is designed with a belt type spindle. This allows drastic decrease in noise during machining operations and provides easy maintenance.
By using ultra precision angular ball bearings, fast acc/deceleration of spindle is achieved.
The spindle head is designed to minimize the heat displacement, and with the use of a hydraulic tool locking system the machining stability is improved.
ThroughSpindleCoolantThrough Spindle Coolant is exceedingly useful when drilling deep holes. It helps increase the lifetime of the tool, while decreasing cycle time.
F600BAllAxes:Standard
F510B8,000rpm(Belt):Option8,000rpm(Gear):Standard20bar/30bar/70bar
(290psi/435psi/1,015psi)
03 High Precision SpindleHigh Accuracy & Excellent PerformanceVertical Machining CenterFB Series
2StepGearDrivenSpindle(F600B)F600B spindle features cylindrical roller bearings, ensuring maximum torque and heavy duty cutting abilities.The 2 step gear driven spindle allows high torque during low speed operations and stable machining during high speed operations.
SpindleCoolingThe spindle cooling system minimizes thermal displacement which can happen during lengthy machining operations, and offers continued accuracy based on the thermal stability.
08+
09
FB
Ser
ieS
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
Spindle
Power (kW[HP])
Spindle Speed (r/min)
F510B 8,000rpm Belt (Std.) F510B 8,000rpm Gear (Opt.)
F600B 4,500rpm Gear (Std.) F600B 8,000rpm Gear (Opt.)
F600B 4,500rpm Gear (Opt.) F600B 8,000rpm Gear (Opt.)
Spindle Speed (r/min)
Spindle Speed (r/min) Spindle Speed (r/min)
Spindle Speed (r/min) Spindle Speed (r/min)
Torque (N∙m[lbf∙ft]) Power (kW[HP]) Torque (N∙m[lbf∙ft])
Power (kW[HP]) Torque (N∙m[lbf∙ft]) Power (kW[HP]) Torque (N∙m[lbf∙ft])
Power (kW[HP]) Torque (N∙m[lbf∙ft]) Power (kW[HP]) Torque (N∙m[lbf∙ft])
15[20]
11[14.7]
0 280 1,118 1,500
1,285
7.5[10]
0
0 60 269 1,075 1,509 6,034 8,000
60 269 1,075 1,509 6,034 8,000
0
00
20 196 782 1,125 4,500
20 196 782 1,125 4,500
500 750 6,000 8,000 6,000 8,000
15kW [20HP] (S3, 30min)
11kW [14.7HP] (Cont.)
287N∙m [211.6lbf∙ft] (S3, 30min)
143N.m [105.4lbf.ft] (Cont.)
15[20]
13[17.4]
11[14.7]
9[12]
512[377.6]
375[276.5]
95[70]
70[51.6]
8.9[6.5]6.6[4.8]
390.3[287.8]
287[211.6]
143[105.4]
95[70]
18[13.2]9[6.6]
512N∙m [377.6lbf∙ft] (S3, 30min)
375N∙m [276.5lbf∙ft] (Cont.)
18.5[24.8]
15[20]
901[664.5]730[538.4]535[394.6]
901N∙m [664.5lbf∙ft] (S3, 30min)
730N∙m [538.4lbf∙ft] (S3, 30min)
18.5kW [24.8HP] (S3, 30min)
15kW [20HP] (S3, 30min)15
[20]
18.5[24.8]
532[392.3]
657[484.5]
390[287.6]
657N∙m [484.5lbf∙ft] (S3, 30min)
532N∙m [392.3lbf∙ft] (S3, 30min)
18.5kW [24.8HP] (S3, 30min)
15kW [20HP] (S3, 30min)
15[20]
11[14.7]
730[538.4]
901[664.5]
535[394.5]
730N∙m [538.4lbf∙ft] (S3, 30min)
535N∙m [394.5lbf∙ft] (Cont.)
15kW [20HP] (S3, 30min)
11kW [14.7HP] (Cont.)15
[20]
11[14.7]
532[392.3]390[287.6]
532N∙m [392.3lbf∙ft] (S3, 30min)
390N∙m [287.6lbf∙ft] (Cont.)
15kW [20.1HP] (S3, 30min)
11kW [14.7HP] (Cont.)
15kW [20HP] (S3, 30min)
11kW [14.7HP] (Cont.)
SpindleOutput/TorqueDiagram
SpindleCoolingStd.
SpindleCoolingStd.
SpindleCoolingStd.
SpindleCoolingOpt.
SpindleCoolingStd.
SpindleCoolingStd.
04 ATC & MagazineHigh Productivity Achieved with Rigidity andAccuracy in MachiningFB Series
F510B F600B
◉No. of Tool : 24 [30] EA
◉Tool Shank : BT40◉Max. Tool Dia. (W.T/W.O) :
Ø90/Ø150 (Ø3.5″/Ø5.9″)◉Max. Tool Weight : 8 kg (17.6 lb)
◉Tool Selection Method : Random
◉No. of Tool : 20 [30] EA
◉Tool Shank : BT50◉Max. Tool Dia. (W.T/W.O) :
Ø125/Ø240 (Ø4.9″/Ø9.4″)◉Max. Tool Weight : 20 kg (44 lb)
◉Tool Selection Method : Random
Magazine(F510B)The tool magazine holds 24 tools as standard and 30 tools as an option.Due to the wider selection of tools and the random tool selection method, tool change time has been improved.
ServoATCHigh precision compound cam Twin Arm Servo ATC offers fast and accurate tool change, reducing non-cutting time compared to the previous model.
◉ATCSpeedImprovement(F510B)
25%reduction
Before
After
2.0 sec
1.5sec
Tool to Tool
7.7%reduction
Before
After
5.2 sec
4.8sec
Chip to Chip
30 Tool Magazine (F510B)
30 Tool Magazine (F600B)
10+
11
FB
Ser
ieS
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
ATC & Magazine
05 Machining CapabilityExcellent Performance, High AccuracyVertical Machining CenterFB Series
❖ The above results might be different by types of processing circumstances.
FACE MILL 〈Material〈JIS〉:S45C(Carbon steel)〉
Tool diameterCutting depthCutting widthCutting speedSpindle motorFeed rateChip quantity
Ø160 (Ø6.3″) x 10F7 mm (0.27″)100 mm (3.94″)160 mm/min (6.3 ipm)15/11 kW (20/14.7 kW)230 mm/min (9.05 ipm)403 cc/min
END MILL 〈Material〈JIS〉:S45C(Carbon steel)〉
Tool diameterCutting depthCutting speedSpindle motorFeed rateChip quantity
Ø50 (Ø1.97″)35 mm (1.38″)120 mm/min (4.72 ipm)15/11 kW (20/14.7 kW)230 mm/min (9.05 ipm)403 cc/min
F510B F600B FACE MILL 〈Material〈JIS〉:S45C(Carbon steel)〉
Tool diameterCutting depthCutting widthCutting speedSpindle rpmFeed rateChip quantity
Ø80 (Ø3.15″) x 6F5.5 mm (0.22″)70 mm (2.76″)236 mm/min (9.3 ipm)1,137 r/min0.99 mm/rev (0.039″/rev)430 cc/min
DRILL 〈Material〈JIS〉:S45C(Carbon steel)〉
Tool diameterCutting depthCutting speedSpindle rpmFeed rateChip quantity
Ø43 (Ø1.7″)43 mm (1.7″)27 mm/min (1.06 ipm)199 r/min0.38 mm/rev (0.014″/rev)109 cc/min
TAP. 〈Material〈JIS〉:S45C(Carbon steel)〉
Tap spec./PitchCutting depthCutting speedSpindle rpmFeed rate
M24 x P4.542 mm (1.65″)7 mm/min (0.27 ipm)53 r/min4.5 mm/rev (0.17″/rev)
Sample Workpieces
Machining
12+
13
FB
Ser
ieS
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
06 Smart SystemSoftware for smart operating and machiningFB Series
Intelligent Machining
Machine Monitoring
High Precision
High Productivity Energy Savin
g
HW-TM | HW-MCS | HW-A
FC
HW-TOM | HW-WCM
HW-ESS
User Friendly
HW-MMSHW-TDC | HW
-WARM
UP
HYUNDAI WIA Smart System for Vertical Machining Center
User Convenience
HW-eDNC
HW-MCG
Faster processing and enhanced accuracy in are possiblethrough the HYUNDAI WIA Smart System. The user friendly software and equipment monitoring of the Smart System maximizes productivity.
HW-eDNCHYUNDAIWIAethernetDirectNumericalControl
This software allows transmition of NC data between PC and a machine's CNC. The processing programs can be managed on the PC through the ethernet or serial communication.
HW-MMSHYUNDAIWIAMachineMonitoringSystem
This software is for remote control monitoring of equipment status (mobile, PC.) It checks and manages the state of multiple machines and the progress of processing on a real time basis.
14+
15
FB
Ser
ieS
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
HYUNDAI WIA Smart System
USBPortConvenience is increased when inputting and outputting program. The USB port is available in addition to the former input output methods such as CF memort card and LAN.(HWFSeries,S828D:Standard/F32i-A:Nonapplicable)
HW-TDCHYUNDAIWIAThermalDisplacementCompensation
Software that measures the changes in the external environment as well as heat emission during processing to help reduce thermal displacement.
HW-ESSHYUNDAIWIAEnergySavingSystem
An environmental friendly software that reduces the unnecessarily wasted standby power waiting for an operation.
(FANUC)
HW-TMHYUNDAIWIAToolMonitoring
A tool monitoring software which analyzes the load of the spindle motor to determine and monitor possible damage of tools.
(FANUC)
HW-MCGHYUNDAIWIAMachineGuidance
Software that offers operation, maintenance, management monitoring and various user friendly features.
(FANUC)
HW-WARMUPHYUNDAIWIAWARMingUp
Warm-up software that measures main spindle halt and offers system warm-up time automatically.
HW-TOMHYUNDAIWIAToolOffsetMeasurement
User friendly GUI software that indicates tool length, diameter, and damage (H/Wexcluded)
(FANUC)
HW-WCMHYUNDAIWIAWorkCoordinateMeasurement
User-friendly GUI software that measures work coordinates (H/Wexcluded)
(FANUC)
HW-AFCHYUNDAIWIAAdaptiveFeedControl
Software that controls the feed automatically to maintain a certain working load to extend tool life as well as productivity.
(FANUC)
HW-MCSHYUNDAIWIAMachiningConditionSelection
Software that automatically sets cutting and feeding parameters according to the machining types (speed, degree, quality)
(FANUC)
User ConvenienceVarious Devices for User Convenience
HydraulicSupplyUnitInstead of the standard hydraulic supply unit, an optional fixture unit can bring the pressure up to 70 bar (1,015 psi), maximizing the clamping force on the fixture.
NCRotaryTableThe NCRT makes it possible to machine up to 5-axis. Various types of products can be machined.
U-CenterWith U-Center, both external and internal diameter turning become possible, allowing for a wide range of variety in products.
Hydraulic Device
Precision Device
07FB Series
Measuring Device
TouchSensorWorkpiece coordinate values can be set automatically using the optional spindle probe.
TLM-Laser&TouchTool lengths and diameters can be set automatically using the optional tool setter. This can also be used to monitor tool attrition and detect broken tools.
Laser Type
Touch Type
16+
17
Chip Disposal Process (F510B)
Chip Conveyor Front (Left)
•Hinge Belt Type : Highly efficient when disposing a lot of chips. Capable of handling stringy chips. (Long Chip)
•Scraper Type : Convenient for shortly cut chips.. (Short Chip)•Drum Filter Type : Advantageous in precision, as the chips do not flow in to the coolant nozzle.
(AL Chip)
Timely and effective disposal of chips will enhance productivity as well as the working environment.
Chip Conveyor
Optional
FB
Ser
ieS
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
Std. Coolant (Nozzle)
Bed Flushing Coolant
Through Spindle Coolant
(20/30/70 bar [290/435/1,015 psi])
Shower Coolant
Gun Coolant
Side Oil Hole Coolant
Standard
Standard
Option
Option
Option
Option
Coolant Unit
Chip Conveyor Rear (Left)
F510B F600B ○ ○ ○ ○ ○ ○ ○ ○
● ● ☆ ☆ ☆ ☆
● ● ○ ○ ○ ○ ● ● ○ ○ ● ● ● ● ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ☆ - ☆ ☆ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ☆ ☆ ○ ○ ○ ○
● -
○ ○ ○ ○ ☆ ☆ ☆ ☆
Tool Offset Measurement (HW-TOM) : FANUCWork Coordinate Measurement (HW-WCM) : FANUCMachining Condition Selection (HW-MCS) : FANUCAdaptive Feed Control (HW-AFC) : FANUCETC Tool BoxCustomized ColorCAD & CAM Software Electric DeviceCall LightCall LightCall Light & BuzzerWork LightElectric Cabinet LightDoor Inter-LockRemote MPG3 Axis MPGSpindle Load MeterSpindle Speed MeterWork CounterTotal CounterTool Counter
Multi Tool Counter
Electric Circuit BreakerAVR (Auto Voltage Regulator)TransformerFlash Memory CardAuto Power OffBack up Module for Black outMeasuring Device
Air Zero
Work Measuring DeviceTLM(Marposs/Renishaw/Bloom)Tool Broken Detective DeviceLinear ScaleCoolant Level Sensor (Only for Chip Conveyor)EnviornmentAir ConditionerDehumidifierOil Mist CollectorOil Skimmer (Only for Chip Conveyor)MQL (Minimal Quantity Lubrication)Fixture & Automation
Auto Door
Auto Shutter (Only for Automatic System)Sub O/P
NC Rotary TableI/F
Control of Additional Axis
External M Code 4eaAutomation Interface
I/O Extension (In & Out)
Hyd. Device
Std. Hyd. Unit
Fixture Hyd. Unit
Need Munsel No.
1 Color : ■3 Color : ■■■3 Color : ■■■B
LED TypeLED TypeDigitalDigitalDigital6 EA9EA
30kVA
TACOSMC
TouchLaser
X/Y/Z Axis
Std.High Speed
SingleChannel1Axis2Axis
16Contact32Contact
70bar (1,015 psi) / 11ℓ(2.9 gal)45bar (652.7 psi)70bar (1,015 psi)100bar (1,450 psi)Customized
Standard&Optional
4,500rpm (15/11kW)4,500rpm (18.5/15kW)8,000rpm (15/11kW)8,000rpm (15/11kW)8,000rpm (18.5/15kW)
Spindle Cooling System
ATC
ATC Extension
Tool Shank Type
U-Center
Stud Bolt Collet Change
Table & ColumnAPCTap Type PalletT-Slot PalletNC Rotary Table
High Column
Coolant SystemStd. Coolant (Nozzle)Bed Flushing Coolant
Through spindle coolant*
Top Cover (Thru coolant applied when necessary)Shower CoolantGun CoolantSide Oil Hole CoolantAir GunCutting Air BlowTool Measuring Air Blow (Only for TLM)Air Blow for AutomationThru MQL Device (Without MQL)Coolant ChillerPower Coolant System (For Automation)Chip Disposal
Coolant Tank
Intenal Screw Chip ConveyorChip Conveyor Hinge(Tank Position/Chip Disposal) ScraperSpecial Chip Conveyor (Drum Filter)
Chip Wagon
Safety DeviceTotal Splash GuardS/WMachine Guidance (HW-MCG) : FANUCTool Monitoring (HW-TM) : FANUCDNC Software (HW-eDNC)Spindle Heat Distortion Compensation (HW-TDC)Spindle Warm up Function (HW-WARMUP)Energy Saving System (HW-ESS) : FANUCMachine Monitoring System (HW-MMS)
GEAR (2STEP)GEARBELTGEARGEAR (2STEP)BELTGEAR
202430BT40CAT40BT50CAT50D'andrea45°60°90°
250mm (9.8″)300mm (11.8″)
20bar (290 psi)30bar (435 psi),20ℓ(5.3 gal)70bar (1,015 psi), 15ℓ(4 gal)70bar (1,015 psi), 30ℓ(7.9 gal)
400ℓ(105.7 gal)450ℓ(118.9 gal)
Left(Rear)Left(Left)
Standard(180ℓ[47.5 gal])Swing(200ℓ[52.8 gal])Large Swing(290ℓ[76.6 gal])Large Size(330ℓ[87.2 gal])Customized
Spindle ETC S/W
● : Standard ○ : Option ☆ : Prior Consultation - : Non Applicable
F510B F600B - ● - ○ ● - ○ ○ - ○ ○ - ● ● - ● ● - ○ ○ ● - ○ - - ● - ○ ☆ ☆ ● ● ○ ○ ○ ○ - - - - ● ● ☆ ☆ - ○ - - ● ● - - ○ ○
○ ○
○ ○
○ ○
● ○ ○ ○ ○ ○ ☆ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆ ☆ ☆ ☆ ☆ - ● ● - - ● ○ ○ ○ - ☆ ☆
○ ○
○ ○
○ ○
○ ○
☆ ☆ ● ● ☆ ☆ ○ ○ ○ ○ ○ ○ ○ ○ ☆ ☆ ☆ ☆
Through Spindle Coolant* : Please check the filter types with sales representative. Specifications are subject to change without notice for improvement.
SPECIFICATIONS
unit : mm(in)ExternalDimensions
F510B
18+
19
FB
Ser
ieS
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
SPECIFICATIONS
2830
(111
.4)
2475
(97.
4)
2680 (105.5)
3248 (127.9)
51(2)
718
(28.
3)10
57 (4
1.6)
33(1.3)
2800 (110.2)
3255 (128.1)
455(17.9)
388
(15.
3)19
00 (7
4.8)
ELEC. BOXATC MAG.
SPINDLE HEAD
OP BOX
CABLE VEYOR
1910
(75.
2)20
5(8
.1)
340
(13.
4)
233
(9.2
)17
0(6
.7)
2583
(101
.7)
OP
T.30
T
ATC MAG.(OPT.30T)
130(5.1)
998 (39.1)
1200
(47.
2)
918.1 (36.1)
1200
(47.
2)Rear Chip Conveyor Left Side Chip Conveyor
ATC MAG.
OP BOX
ATC MAG.(OPT.30T)
Rear Chip Conveyor
1870 (73.6)1020 (40.2)
3525 (138.8)
2890 (113.8)
2807
(110
.5) :
20
Tool
2895
(114
) : 3
0 To
ol
1200
(47.
2)
1210
(47.
6)
3240
(27.
6)
312
(12.
3)
72(2.8)
3720 (146.5)
3792 (149.3)
370
(14.
6)15
75 (6
2)
2257
(88.
9)
3240
(27.
6)
2830
(111
.4)
2475
(97.
4)
2680 (105.5)
3248 (127.9)
51(2)
718
(28.
3)10
57 (4
1.6)
33(1.3)
2800 (110.2)
3255 (128.1)
455(17.9)
388
(15.
3)19
00 (7
4.8)
ELEC. BOXATC MAG.
SPINDLE HEAD
OP BOX
CABLE VEYOR
1910
(75.
2)20
5(8
.1)
340
(13.
4)
233
(9.2
)17
0(6
.7)
2583
(101
.7)
OP
T.30
T
ATC MAG.(OPT.30T)
130(5.1)
998 (39.1)
1200
(47.
2)
918.1 (36.1)
1200
(47.
2)
Rear Chip Conveyor Left Side Chip Conveyor
ATC MAG.
OP BOX
ATC MAG.(OPT.30T)
Rear Chip Conveyor
1870 (73.6)1020 (40.2)
3525 (138.8)
2890 (113.8)
2807
(110
.5) :
20
Tool
2895
(114
) : 3
0 To
ol
1200
(47.
2)
1210
(47.
6)
3240
(27.
6)
312
(12.
3)
72(2.8)
3720 (146.5)
3792 (149.3)
370
(14.
6)15
75 (6
2)
2257
(88.
9)
3240
(27.
6)
unit : mm(in)ExternalDimensions
F600B
SPECIFICATIONS
2830
(111
.4)
2475
(97.
4)
2680 (105.5)
3248 (127.9)
51(2)
718
(28.
3)10
57 (4
1.6)
33(1.3)
2800 (110.2)
3255 (128.1)
455(17.9)
388
(15.
3)19
00 (7
4.8)
ELEC. BOXATC MAG.
SPINDLE HEAD
OP BOX
CABLE VEYOR
1910
(75.
2)20
5(8
.1)
340
(13.
4)
233
(9.2
)17
0(6
.7)
2583
(101
.7)
OP
T.30
TATC MAG.(OPT.30T)
130(5.1)
998 (39.1)
1200
(47.
2)
918.1 (36.1)
1200
(47.
2)
Rear Chip Conveyor Left Side Chip Conveyor
ATC MAG.
OP BOX
ATC MAG.(OPT.30T)
Rear Chip Conveyor
1870 (73.6)1020 (40.2)
3525 (138.8)
2890 (113.8)
2807
(110
.5) :
20
Tool
2895
(114
) : 3
0 To
ol
1200
(47.
2)
1210
(47.
6)
3240
(27.
6)
312
(12.
3)
72(2.8)
3720 (146.5)
3792 (149.3)
370
(14.
6)15
75 (6
2)
2257
(88.
9)
3240
(27.
6)
2830
(111
.4)
2475
(97.
4)
2680 (105.5)
3248 (127.9)
51(2)
718
(28.
3)10
57 (4
1.6)
33(1.3)
2800 (110.2)
3255 (128.1)
455(17.9)
388
(15.
3)19
00 (7
4.8)
ELEC. BOXATC MAG.
SPINDLE HEAD
OP BOX
CABLE VEYOR
1910
(75.
2)20
5(8
.1)
340
(13.
4)
233
(9.2
)17
0(6
.7)
2583
(101
.7)
OP
T.30
T
ATC MAG.(OPT.30T)
130(5.1)
998 (39.1)
1200
(47.
2)
918.1 (36.1)
1200
(47.
2)
Rear Chip Conveyor Left Side Chip Conveyor
ATC MAG.
OP BOX
ATC MAG.(OPT.30T)
Rear Chip Conveyor
1870 (73.6)1020 (40.2)
3525 (138.8)
2890 (113.8)
2807
(110
.5) :
20
Tool
2895
(114
) : 3
0 To
ol
1200
(47.
2)
1210
(47.
6)
3240
(27.
6)
312
(12.
3)
72(2.8)
3720 (146.5)
3792 (149.3)37
0(1
4.6)
1575
(62)
2257
(88.
9)
3240
(27.
6)
205 (8)
264.8(10.4)
141.
3(5
.6)
600
(23.
6)
300
(11.
8)30
0 (1
1.8)
(Stro
ke)
70(2.7)
70(2.7)
5(0
.2)
105
(4)
100
(3.9
)10
0(3
.9)
580
(22.
8)
770
(30.
3)5
(0.2
)
170
(6.7
)20
(0.8
)
100
(3.9
)10
0(3
.9)
75 (2.9
)
50 (2)
5(0
.2)
50 (2)
100
(3.9
)10
0(3
.9)
500
(19.
7)
100
(3.9
)10
0(3
.9)
1060 (41.7)
1200 (47.2)
225(8.8)
225(8.8)
575 (22.6) 575 (22.6)
1150(45.3)
1600 (63)
(Stroke)
Ø458
(Ø18)
Ø95(Ø3.7)
Ø125(Ø4.9)
Ø600
(Ø23.6)
Ø553(Ø21.7)
102
(4)
unit : mm(in)TableDimensions
F510B
F600B20+
21
FB
Ser
ieS
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
SPECIFICATIONS
unit : mm(in)
Ø5.
7(Ø
0.22
)
Ø8
(0.3
15)
16(0.63)
7(0.276)
P8
Ø3
(Ø0.
11)
Ø5
(Ø0.
19)
11.5 (0.45)3
(0.11)
P5
BT40
BT50
Ø63
(Ø2.
48)
65.4(2.57)6 (0.23)
27(1.06)
2(0.06)
Ø44
.45
(Ø1.
75)
35(1.37)29(1.14)
Ø15
(Ø0.
59)
60°
45°
16.6(0.65)
7/24
M16
Ø10
(Ø0.
39)
10(0.39)
22.6(0.88)
16.1
(0.6
3)
35.4(1.39)
25.7
(1.0
1)
Ø10
0 (Ø
3.93
)
Ø69
.85
(Ø2.
75)
Ø17
(Ø0.
66)
Ø23
(Ø0.
91)
60°
38(1.49)
23.2 (0.91)
10 (0.39)
45(1.77)
101.8 (4)
7/24
M24
35(1.37)
15(0.59)
45°
3 (0.11)
60°CAT-50
Ø3
(0.1
18)
Ø6.
2 (0
.244
)
Ø5
(0.0
97)
Ø8
(0.3
15)
2. R0.4
1BP8
1BP8
11.5(0.453)
16(0.63)
7(0.276)
3(0.118)
1BP5
25(0.983)
22.5(0.888)
16.3
83(0
.645
)
60°
60°
45°
CAT40
Ø63
.5 (2
.5)
15 (0
.59)
68.25 (2.687)15.8 (0.625)3.2 (0.125)
7/24
32.15(1.266)
5/8″-11
Ø44
.5 (1
.75)
101.8 (4.000)
Ø69
.8(Ø
2.75
0)
Ø98
.4 (3
.875
)
19.05 (0.750)45
(1.772)
37.5(1.478)
35.1(1.383)
25.8
(1.0
15)1″-8UNC
7/24
23 (0
.906
)
60°3.2(0.125) (CAT50)
45°
Ø5.
7(Ø
0.22
)
Ø8
(0.3
15)
16(0.63)
7(0.276)
P8
Ø3
(Ø0.
11)
Ø5
(Ø0.
19)
11.5 (0.45)3
(0.11)
P5
BT40
BT50
Ø63
(Ø2.
48)
65.4(2.57)6 (0.23)
27(1.06)
2(0.06)
Ø44
.45
(Ø1.
75)
35(1.37)29(1.14)
Ø15
(Ø0.
59)
60°
45°
16.6(0.65)
7/24
M16
Ø10
(Ø0.
39)
10(0.39)
22.6(0.88)
16.1
(0.6
3)
35.4(1.39)
25.7
(1.0
1)
Ø10
0 (Ø
3.93
)
Ø69
.85
(Ø2.
75)
Ø17
(Ø0.
66)
Ø23
(Ø0.
91)
60°
38(1.49)
23.2 (0.91)
10 (0.39)
45(1.77)
101.8 (4)
7/24
M24
35(1.37)
15(0.59)
45°
3 (0.11)
60°CAT-50
Ø3
(0.1
18)
Ø6.
2 (0
.244
)
Ø5
(0.0
97)
Ø8
(0.3
15)
2. R0.4
1BP8
1BP8
11.5(0.453)
16(0.63)
7(0.276)
3(0.118)
1BP5
25(0.983)
22.5(0.888)
16.3
83(0
.645
)
60°
60°
45°
CAT40
Ø63
.5 (2
.5)
15 (0
.59)
68.25 (2.687)15.8 (0.625)3.2 (0.125)
7/24
32.15(1.266)
5/8″-11
Ø44
.5 (1
.75)
101.8 (4.000)
Ø69
.8(Ø
2.75
0)
Ø98
.4 (3
.875
)
19.05 (0.750)45
(1.772)
37.5(1.478)
35.1(1.383)
25.8
(1.0
15)1″-8UNC
7/24
23 (0
.906
)
60°3.2(0.125) (CAT50)
45°
F510B
F600B
ToolShank
SPECIFICATIONS
F510B
F600B
Specifications are subject to change without notice for improvement.
Table Size
Maximum Load Capacity
Table Change Time
Change Method
Table Driving Method
Spindle Taper
Spindle RPM
Spindle Power Output
(Max./Cont.)
Spindle Torque
(Max./Cont.)
Spindle Driving Method
Travel (X/Y/Z)
Distance from Table Surface to SP
Distance from Column to SP. center
Rapid Traverse Rate (X/Y/Z)
Slide Type
Number of Tools
Tool Shank
Max. Tool Dia. (W.T / W.O)
Max. Tool Length
Max. Tool Weight
Tool Selection Method
Tool Change Time T-T
C-C
Coolant Tank
Lubricating Tank
Hydraulic Tank
Air Consumption (0.5MPa)
Electric Power Supply
Thickness of Power Cable
Voltage
Floor Space (L×W)
Height
Weight
Controller
TABlE
FEED
TANkCApACITY
SpINDlE
ATC
MACHINE
NC
poWErSUpplY
mm(in)
kg(lb)
sec
-
-
-
r/min
kW(HP)
N.m(lbf.ft)
-
mm(in)
mm(in)
mm(in)
m/min(ipm)
-
EA
-
mm(in)
mm(in)
kg(lb)
-
sec
sec
ℓ(gal)
ℓ(gal)
ℓ(gal)
ℓ/min(gal)
KVA
Sq
V/Hz
mm(in)
mm(in)
kg(lb)
-
ITEM F510B F600B
Specifications [ ] : Option
1,200×500 (47.2″×19.7″)
800 (1,764)
-
-
-
NT #40
8,000 [8,000]
15/11 (20/15) [15/11 (20/15)]
287/143(211.6/105.4)
[512/375(377.6/276.5)]
BELT [GEAR]
1,100/510/635 (43.3″/20.1″/25″)
150~785 (5.9″~30.9″)
615 (24.2″)
30/30/24 (1,181/1,181/944.8)
BOX GUIDE
24 [30]
BT40 [CAT40]
Ø90/Ø150 (3.5″/5.9″)
300 (11.8″)
8 (17.6)
RANDOM
1.5
4.8
485 (128.1)
2 (0.5)
11 (2.9)
250 (66)
24
OVER 25
220/60 (200/50)
2,910×2,690 (114.6″×105.9″)
2,815 (110.8″)
7,700 (16,976)
HYUNDAI WIA FANUC i Series
1,600×600 (63″×23.6″)
{When applying jig, Y-axis : 580 (22.8″)}
1,000 (2,205)
-
-
-
NT #50
4,500 [4500] [8,000] [8,000]
15/11(20/15) [18.5/15(25/20)]
[15/11(20/15)] [18.5/15(25/20)]
730/535(538.4/394.5) [901/730(664.5/538.4)]
[532/390(392.4/287.6)] [657/532(484.5/392.3)]
GEAR
1,150/600/600 (45.3″/23.6″/23.6″)
180~780 (7.1″~30.7″)
620 (24.4″)
24/24/24 (944.8/944.8/944.8)
BOX GUIDE
20 [30]
BT50 [CAT50]
Ø125/Ø240 (4.9″/9.4″)
300 (11.8″)
20 (44.1)
RANDOM
3.4
6.8
400 (105.7)
3 (0.8)
-
400 (105.6)
28
OVER 25
220/60 (200/50)
3,720×4,155 (146.5″×163.6″)
3,240 (127.6″)
10,500 (23,149)
HYUNDAI WIA FANUC i Series [F 31i-A]
22+
23
FB
Ser
ieS
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
SPECIFICATIONS
Figures in inch are converted from metric values.Design and specifications are subject to change without notice.
CONTROLLER
HYUNDAIWIAFANUCiSeriesAxis control / Display unitControlled axis
Simultaneous controllable axis
Least input incrementLeast command incrementInch/Metric conversionInterlockMachine lockEmergency stopStored stroke check 1Stored stroke check 2Stored stroke check 3Follow-upServo off
Backlash compensation
Position switchStored pitch error compensationLCD/MDIoperationAutomatic operation (memory)MDI operationDNC operationSearch functionProgram restartWrong operation preventionBuffer registerProgram check functionSingle blockHandle interruptFeed functionsManual jog feedManual handle feed-rateFeed commandFeedrate overrideJog feedRapid traverse overrideOverride cancelRapid traverse bell-shaped acceleration/decelerationAuto corner overrideprogram input & Interpolation functionsLabel SkipControl in/out
Nano Interpolation
Exact stop mode/Exact stopDwellHelical interpolationThreading/synchronous feedManual reference point returnReference point returnReference point return check2nd, 3rd, 4th Reference point returnProgram stop/endTape codeOptional block skipMax. programmable dimensionsProgram numberAbsolute/incremental commandDecimal point inputPlane selectionWork coordinate system settingWork coordinate presetAdditional work coordinate systemManual absoluteProgrammable data inputSub program callCustom macroAddition to custom macro common variablesCircular interpolationCanned cycle
3-axes (X, Y, Z)3-axes(G00 & G01 : 3-axes, G02 & G03 : 2-axes)X, Y, Z axis : 0.001 mm (0.0001″)X, Y, Z axis : 0.001 mm (0.0001″)G20 / G21Each axis / All axesAll axes
Over Trable
+/- 0~9999 pulse(rapid traverse & cutting feed)
8.4″ color LCD
Need DNC Program Sequence, Program
Dry run, program check
Rapid, Jog, handlex1, x10, x100F code feedrate direct command0~200% (10% Unit)0~5,000 mm/min (197 ipm)F0, F25%, F50%, F100%
G62
Positioning/Linear/Circular(G00/G01/G02/G03)G61 / G09G04, 0~9999.9999sec
G33
G28G27G30M00, M01 / M02, M30EIA RS-244/ISO 840 (Automatic recognition)1 EA+/- 9999.9999 (+/- 8 digits)O4 /N8G90 / G91
G17, G18, G19G52~G59G50.3G54.1 P1 ~P48 (48 pairs)"On" fixedG1010 Step
#100 ~ #199 , #500 ~ #999G02, G03G73, G74, G76, G80 ~ G89
program input & Interpolation functionsOptional chamfering/corner RSkip functionHigh speed Skip functionAutomatic coordinate system settingCoordinate system rotationProgrammable mirror imageSingle direction positioning
External data input
Cylindrical interpolationAI advanced preview controlPolar coordinate commandSub / Spindle functionsMiscellaneous functionMiscellaneous function lockSpindle speed commandSpindle speed overrideSpindle orientationRigid tappingTool functions / Tool compensationTool functionCutter compensation CTool length measurementTool length compensationTool offset amountTool offset pairsTool life managementData input / output & Editing functionsReader/Puncher interfaceMemory card input/outputUSB Input/OutputEmbeded EthernetPart program storage lengthRegistered programsMemory lockBack ground editingExtended part program editingSetting, display, diagnosisSelf-diagnosis functionHistory displayHelp functionRun hour/Parts count displayActual cutting feedrate displaySpindle/Servo setting screenMulti-language displayDynamic switching display languageLCD Screen Save
optionSub Axis ControlTwo way pitch error compensationManual Guide 0iManual Guide iDynamic graphic displayOptional block skip addAI contour control(AICC) AI contour control(AICC) ⅡNano SmoothingTool Management FunctionProtection of data at 8 levelsData serverFASTethernetPart program storage length Expand
G31
G68, G69G50.1, G51.1G60Tool offset/message/machine zero point shift
G5.1 (20 Block)G15, G16
M3 digits
S5 digits, binary output50%~120% (10% unit)
Max. T8 digitsG40~G42Z-Axis INPUT CG43, G44, G49G45~G48 (+/- 6 digits)400 pairs
RS232C
100Mbps1280m (512 Kbyte)400 ea
Copy, move, change of NC program
Alarm & operator message
Selection of 5 optional language
Screen saver
4, 5 Axes
8.4″ color LCD10.4″ color LCD (Interactive Program)
9 ea (Application can be limited)40 Block200 Block
1GB100 Mbps (Option board is required)5120m (2 Mbyte)
FANUC31i-A(F600B)Axis control / Display unitControlled axesSimultaneous controllable axesLeast input incrementLeast command incrementInch / Metric conversionInterlockMachine lockEmergency stopStored stroke check 1Mirror imageFollow-upServo off
Backlash compensation
Position switchPitch error compensationStored pitch error compensation*LCD/MDIoperationAutomatic operation (memory)MDI operationResearch FunctionProgram restartDry run,Single BlockBuffer registerMemory Card DNC operationFeed functionsManual jog feedManual handle feed-rateFeed commandFeedrate overrideJog feedRapid traverse overrideOverride cancelRapid traverse bell-shaped acce/decelerationprogram input & Interpolation functionsLabel SkipControl in/out
Interpolation function
Exact stop mode/Exact stopDwellHelical interpolationThreading/synchronous feedManual reference point returnReference point returnReference point return check2nd, Reference point returnProgram stop/endTape codeOptional block skipMax. programmable dimensionsProgram number/Sequence numberAbsolute/incremental commandDecimal point inputPlane selectionWork coordinate presetManual absoluteProgrammable data inputSub program callCustom macroAI Contour Control(AICC) ICircular interpolationCanned cycleOptional chamfering/corner RSkip functionAutomatic coordinate system settingCoordinate system rotationProgrammable mirror image
3-axes (X, Y, Z) 3-axes (G00 & G01 : 3-axes, G02 & G03 : 2-axes)X, Y, Z axis : 0.001 mm (0.0001″)X, Y, Z axis : 0.001 mm (0.0001″)G20 / G21Each axis / All axesAll axes
+/- 0~9999 pulse(rapid traverse & cutting feed)
10.4″ color LCD
Sequence, Program
Rapid, Jog, handlex1, x10, x100F code feedrate direct command0~200% (10% Unit)0~5,000mm/min (197ipm)F0, F25%, F50%, F100%
Positioning/Linear/Circular(G00/G01/G02/G03)G61 / G09
G04, 0~9999.9999sec
G28G27G30M00, M01 / M02, M30EIA / ISO (Automatic recognition)1 ea+/- 9999.9999” (+/- 8digit)O4 / N8 digit
G90 / G91
G17, G18, G19G52~G59“On” fixedG1010 Step
G73, G74, G76, G80 ~ G89
G31
Sub / Spindle functionsMiscellaneous functionMiscellaneous function lockSpindle speed commandSpindle speed overrideSpindle orientationRigid tappingTool functions / Tool compensationTool functionCutter compensation CTool length compensationTool offset pairsTool life managementData input / output & Editing functionsReader/Puncher interfaceMemory card input/outputEmbeded EthernetPart program storage lengthRegistered programsMemory lockBack ground editingExtended part program editingExtenal messageSetting, Display, DiagnosisSelf-diagnosis functionAlarm history displayHelp functionRun hour/Parts count displayActual cutting feedrate displayGraphic displaySpindle/Servo setting screenOperation monitor screenSelection of 5 optional languageLCD Screen SaveAuto Data BackupManual Guide i
optionSub Axis ControlAdditional work coordinate systemAdditional custom micro changeWork coordinate CommandWork coordinate InterpolationCircular InterpolationSingle direction positioningFAST ethernetData serverAI Contour Control(AICC) IIAdditional optional blockskipHandle interuptManual Handle Feedprogram storage lengthDynamic graphic displayProtection of data at 8 levelsTool monitoring function
Figures in inch are converted from metric values.Design and specifications are subject to change without notice.
M3 digit
S5 digits, binary output50% ~ 120% (10% Unit)
Max. T8 digitsG40~G42G43, G44, G4999 Pair
RS232C
100 Mbps320 m (128 Kbyte)125 ea
Copy, move, change of NC program
Alarm & Message
Loadmeter Light
Screen saver
Interactive Programming
4, 5 Axes48 Pair / 300 Pair#100~#199, #500~#999
G60100 Mbps1GB 9 ea (Application can be limited)
3 Unit640m (256Kbyte) / 5120m (2Mbyte)
HWTM (Embeded FANUC Type)
CONTROLLER
24+
25
FB
Ser
ieS
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
GLOBALNETWORk
26+
27
FB
Ser
ieS
Vert
ical
Mac
hini
ng C
ente
rH
YUN
DAI
WIA
MAC
HIN
E TO
OL
Changwon Technical Center / R&D Center / Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea (Zip Code : 51533)TEL : +82 55 280 9114 FAX : +82 55 282 9680
Uiwang Technical Center / R&D Center37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do, Korea (Zip Code : 16082)TEL : +82 31 596 8209 Fax : +82 55 210 9804
HeADqUARTeR
OVeRSeAS OFFICeSHYUNDAI WIAMachine Tools America 265, Spring Lake Drive, Itasca, IL, 60143
TEL : +1 201 489 2887 FAX : +1 201 489 2723
Jiangsu HYUNDAI WIANo.6 Fenghuang Road, Fenghuang Town, Zhangjjagang City, Jiangsu province, China
TEL : +86 512 5672 6808FAX : +86 512 5671 6960
Chengdu OfficeNO.508 Room, B Block, AFC Plaza, NO.88 Jiaozi Road, High-tech Zone, Chengdu, China 610041
TEL : +86 28 8665 5550FAX : +86 28 8666 2985
HYUNDAI WIAMachine Tools europe Kaiserleipromenade 5, D-63067 Offenbach, Germany
TEL : +49 69271 472 701FAX : +49 69271 472 719
Hyundai WIA Machine Tools ChinaShanghai Office1-3F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China, 200233
TEL : +86 21 6427 9885FAX : +86 21 3431 0376
Wuhan Office Room 302, B tower, Donghe Center, Dongfeng three road, Zhuankou, Wuhan, Hubei, China 430056
TEL : +86 27 5956 3256~7FAX : +86 27 5952 3258
Raunheim Service CenterRaunheim R&D CenterKelsterbacher Strasse 51, 65479 Raunheim, Germany
TEL : +49 6142 9256 0 FAX : +49 6142 834 100
Beijing Office13 Floor Building B Zhonghangji square, No.15 Ronghua South Road, Yizhuang Economic and Technological Development Zone District, Beijing, China 100176
TEL : +86 10 8453 9850~2FAX : +86 10 8453 9853
qingdao OfficeRoom 1207, Caifu Building, 182-6 Haier Middle Road, Qingdao, China 266061
TEL : +86 532 8667 9333~5FAX : +86 532 8667 9338
Inida Office#4/169, Rajiv Gandhi Salai, (OMR), Kandanchavadi, Chennai-600 096, Tamilnadu, IndiaTEL: +91-44-3290-1719
Guangzhou OfficeRoom 311, Unit 1-3, Poly Tal Tu Wun, Hanxi Avenue, Panyu District, Guangzhou, China 511400
TEL : +86 20 8550 6595~6 FAX : +86 20 8550 6597
Shenyang OfficeRoom 1304, NO.53 Beizhan Road, Shenhe District, Shenyang, China 110013
TEL : +86 24 3228 6640FAX : +86 24 3228 6642
2015-12 002.003 ENG
Head office & Factory153, Jeongdong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do
Tel +82 55 280 9206, 9299 Fax +82 55 210 9804
machine.hyundai-wia.com
overseas Sales Team16F, 37, Cheoldobangmulgwan-ro, Uiwang-si, Gyeonggi-do
Tel +82 31 593 8173