fb-274 gb paladin1200d

Upload: chaudhas

Post on 05-Apr-2018

215 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/31/2019 Fb-274 Gb Paladin1200d

    1/2

    PELLETING PRESSTYPE PALADIN 1200 D

    Pelleting section general descriptionThe Paladin is o a sturdy, sel contained design, with a

    combined V-rope and toothed belt transmission, provided

    through a balanced twin drive system. The design o the

    mainshat allows applying o maximum torque on the pelleting

    section. These eatures make the Paladin Pelletmill range a

    universal adaptable machine whereby maximum reliability is

    provided under all working conditions.

    Twin DriveThe twin drive ensures a smooth operation with low levels o

    vibrations. Lietime o mainshat is ensured because o the

    symmetrical load due to the two intermediate shats driving

    the main toothed wheel. The die-speed is chosen based on

    the application. In case adjustment o speed is required the

    easy accessible pulleys can be changed.

    Hydraulic system or Twin-Drive and Brake on MainshatThe V-belts o the two drives rom the main motors are

    automatically tensioned with hydraulic cylinders. This system

    is also used to xate the mainshat with a special designed

    brake system. In the event that the mainshat is turned due

    to overload it takes minimum downtime to position it in the

    original position. It also allows the operators to position

    the rollers in other positions or maximum ecient eed-

    distribution.

    Symmetrical Die with tapered ft

    The Paladin vertical ring-dies are all ully reversible. The

    correct number o bolts is applied or having a very sturdy t

    which easily can be (dis)mantled.

    Pelleting ChamberFor reducing the noise level all paladin doors are doubled

    skinned. The inlet has a pneumatic operated bypass which

    can be used or overload protection as well. Each paladin is

    standard equipped with an adjustable knie assembly. The

    roll-head is either in 2- or 3-roll design depending on the

    application. Through 40 years o experience the design o

    the ront-plate has lead to a system with defectors ensuring

    maximum eed-distribution.

    Electrical system

    The paladin is equipped with all necessary switches and

    sensors to allow a sae controllable operation o the machine.

    Except or the two Main-motors all o the electrical items in

    the Paladin are connected centrally into one Box.

    Hoist or exchanging dies and rollers

    The paladin standard equipped with a heavy duty retractablebar inside the housing. When rollers and/or dies are in need

    o exchange they can be lited easily with the special tools.

    By means o loosening the brake on the mainshat the rollers

    can easily be positioned centrally below the hoist.

    Accessories: Electricmotors

    Setoftools

    Rollswithprolesuitingtheapplication

    Automaticgreasingwithowcontrol

    Electropneumaticallycontrolledgreaselubricationsystem

    274 GB

  • 7/31/2019 Fb-274 Gb Paladin1200d

    2/2

    PELLETING PRESSTYPE PALADIN 1200 D

    All data, inormation, statements, photographs and graphic illustrations made in this leaet are without any obligation and raise no liabilities to or orm par t o any sales contracts o Andritz AG or any afliates or equipment and/orsystems reerred to herein. Andritz AG 2009. All rights reserved. no part o this copyrighted work may be reproduced, modifed or distributed in any orm or by any means, or stored in any database or retrieval system, without theprior written permission o Andritz AG or its afliates. Any such unauthorized use or any purpose is a violation o the relevant copyright laws. Andritz AG, Stattegger Strasse 18, A-8045 Graz, Austria.

    ANDRITZ FEED & BIOFUEL A/SDenmark.TeI. +45 72160 300

    [email protected] FEED & BIOFUEL B.V.The NetherlandsTel. +31 40 [email protected]

    ANDRITZ FEED & BIOFUEL,Division o Andritz S.A.S., FranceTel. [email protected]

    ANDRITZ FEED & BIOFUEL Ltd.EnglandTel. +44 1482825119

    [email protected] FEED & BIOFUELeine Zweigniederlassung der Andritz GmbH.GermanyTel. +49 2104 [email protected]

    ANDRITZ FEED & BIOFUELDivsion O Andritz Inc. USATel. +1 [email protected]

    ANDRITZ FEED & BIOFUELRep. Ofce VenezuelaVenezuela

    Tel. +58 241 [email protected]

    ANDRITZ FEED & BIOFUEL,Division o Andritz Hydro S.A. de C.V.MexicoTel. +52 (229) 178 [email protected]

    ANDRITZ FEED & BIOFUEL Brasil Ltda.BrasilTel. +55 51 3333 0128 [email protected]

    ANDRITZ FEED & BIOFUELDivision o Andritz Chile Ltda.Chile

    Tel.: +56 2214 [email protected]

    ANDRITZ FEED & BIOFUELDivsion O Andritz Pty Ltd.

    AustraliaTel. +61 3 8795 [email protected]

    ANDRITZ FEED & BIOFUELRep. ofce VietnamTel.: +84 8 6253 9434

    [email protected] FEED & BIOFUELDivision O Andritz Technologies Ltd.P.R. ChinaTel: +86 21 [email protected]

    274 GB

    ADit0110

    Technical data

    Die Dimensions

    Die track diameter 650 mm

    Width o die track 175 mm

    Die speed 4,3 - 6 m/sec

    Main drive motors *)

    Number 2

    Maximum power, each 110 kW

    Speed 1500 rpm

    Hydraulic oil pump

    Motor power 0,37 kw

    Speed 900 rpm

    External dimensions o packing:

    Length 2.650 mm

    Width 2.300 mm

    Height 2.100 mm

    Standard fnishes:

    Press Cream RAL 1015

    Guards Blue RAL 5017

    Motors (i supplied with press) Blue RAL 5017

    Weights: Max

    Press with rolls 40 kN

    Die 2 - 3 kN

    Motors 12 - 14 kN

    Static weight including motors 54 - 57 kN

    Dynamic weight including motors 80 - 90 kN