favim fv10 - farratdensity bs en iso 845 100 kg/m3 tensile strength bs iso 37:2011 0.4 n/mm2...
TRANSCRIPT
DATA SHEET
FAVIM FV10Recycled Rubber/Foam Vibration Isolation Matting
FAVIM FV10
Fig 4.2Fig 4.4Fig 2.2Fig 2.1
FAVIM FV10 FAVIM FV10
AVM - FV10 - 18a
Why choose Farrat Favim FV10?Favim is an environmentally friendly, high performance, durable and economical solution to provide vibration and impact sound insulation.
It is produced from the highest quality recycled rubber and foam granulate with a polyurethane bonding agent in tightly controlled, state of the art manufacturing processes.
Features❫ 100% recycled and 100% recyclable
❫ Excellent impact sound insulation andvibration absorption
❫ Operating Loads up to 0.11N/mm2 (110kPa)
❫ Simple and quick installation methods
❫ Excellent long-term resilience
❫ Resistance to moisture absorption and rot
❫ Able to be laid directly onto consolidated hardcore whereit can compensate for surface irregularities
Can be supplied as full sheets, cut to size pads and strips (including holes and slots if required) according to the customer's requirements.
ApplicationsFarrat Favim FV10 is used for 'full area' vibration isolation, sound deadening and lateral isolation.
Industrial❫ Factory and warehouse floor isolation❫ Machine and plant isolated foundations / plinths❫ Laterally isolated foundations
Buildings and Structures❫ Wall channel isolation❫ Acoustic floating floors (commercial and residential)❫ Light and medium weight partition isolations❫ HVAC and plant equipment isolation❫ Lifts and escalators❫ Helicopter landing pads
Favim FV10 site applications:
Favim FV10 used as foundation sidewall isolation
Favim FV10 used to isolate a lightweight partition
Increasing Vibration Isolation Performance
FARRAT FAVIM RANGE:
Increasing Load Bearing Capacity
FV07 FV10 FV55
For more information on using Favim FV10 (including standard details), please see the following Farrat Technical Brochures:
❫ Applications - Isolation of Lightweight Partitions
❫ Applications - Isolation of Timber Stadia Seating
Available to download at: www.farrat.com/downloads
Farrat Isolevel Ltd Balmoral Road, Altrincham, Cheshire, WA15 8HJ, England, UKT. +44 (0) 161 924 1600 F. +44 (0) 161 924 1616E. [email protected] www.farrat.com
All information in this datasheet is for guidance only based on current knowledge and may be subject to change and correction.
ChArACTerISTICS TeST STAndArd ProPerTIeS UnIT
Hardness BS ISO 48:2010 IRHD
Density BS EN ISO 845 100 Kg/m3
Tensile Strength BS ISO 37:2011 0.4 N/mm2
Elongation at Break BS ISO 37:2011 35 %
Flammability BS EN 13501-1:2007 Efl , B2 N/A
ChArACTerISTICS TeST STAndArd ProPerTIeS UnIT
Static Compression Modulus, E
c
Varies with load/thickness - see graphs
Dynamic to Static Ratio
Determined using in-house test methodology.
Test pad dimensions: 75 x 75mm
4.5 N/A
Damping Ratio, C/Cc @ fn 12.6 %
Max Static Pressure [Overload]
0.11 [0.17]
N/mm2
Max Residual Compression After Overload
2.0 %
Standard Sheet Size +/-5% 1250x1000 mm
Operating Temperature N/A -30 to +80 ¡C
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20
Def
lect
ion
(mm
)
Pressure (MPa)
MaxWorking
Load
MaxPeakLoad
25mm
12.5mm
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20
Nat
ural
Fre
quen
cy (
Hz)
Pressure (MPa)
MaxWorking
Load
MaxPeakLoad
12.5mm
25mm
Static deflection
natural Frequency
0
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
0 10 20 30 40 50 60 70 80 90 100
Isol
ator
Nat
ural
Fre
quen
cy (
Hz)
Disturbing Frequency (Hz)
0% 44% (0dB) (-5dB)
68%
82%
90%
94%
(-10dB)
(-15dB)
(-20dB)
(-25dB)
Availability
Typical Lead Times
ThICKneSS TreAd (Bottom/Top) SToCK
12.5 mm Plain/Plain Stock
25 mm Plain/Plain Stock
Other up to 50 mm Plain/Plain Bespoke
SToCK 2-3 working days
non-SToCK 2-3 working weeks
BeSPoKe 4-6 working weeks
If cutting is required add +5 days
25 mm
12.5 mm
Key
Isolation efficiency (Transmissibility)
Data based on material damping specific, single degree of freedom model.
Model applies to all thicknesses.
DATA SHEET AVM-FV55-18a
FAVIM FV55Recycled Rubber/Foam Vibration Isolation Matting
FAVIM FV10
Fig 4.2Fig 4.4Fig 2.2Fig 2.1
FAVIM FV10 FAVIM FV10
Why choose Farrat Favim FV55?Farrat Favim is an environmentally friendly, high performance, durable and economical solution to provide vibration and impact sound insulation.
It is produced from the highest quality recycled rubber with a polyurethane bonding agent in tightly controlled, state of the art manufacturing processes.
Features100% recycled and 100% recyclable
Excellent impact sound insulation and vibration absorption
Operating Loads up to 0.05N/mm2 (50kPa)
Simple and quick installation methods
Excellent long-term resilience
Resistance to moisture absorption and rot
Able to be laid directly onto consolidated hardcore where it can compensate for surface irregularities
Can be supplied as full sheets, cut to size pads and strips (including holes and slots if required) according to the customer's requirements.
ApplicationsFarrat Favim FV55 is used for 'full area' vibration isolation, sound deadening and lateral isolation.
IndustrialFactory and warehouse floor isolationMachine and plant isolated foundations / plinthsLaterally isolated foundations
Buildings and StructuresWall channel isolationAcoustic floating floors (commercial and residential)Light and medium weight partition isolationsHVAC and plant equipment isolationLifts and escalatorsHelicopter landing pads
Farrat Favim FV55 site applications:
Farrat Favim FV55 used as foundation sidewall isolation
Farrat Favim FV55 used to isolate a lightweight partition
Increasing Vibration Isolation Performance
FARRAT FAVIM RANGE:
Increasing Load Bearing Capacity
FV55 FV71 FV75
For more information on using Farrat Favim FV55 (including standard details), please see the following Farrat Technical Brochures:
Applications - Isolation of Lightweight Partitions
Applications - Perimeter Isolation Strips
Available to download at: www.farrat.com
FARRAT FAVIM FV55
FARRAT FAVIM FV55
Farrat Isolevel Ltd Balmoral Road, Altrincham, WA15 8HJ, UKT. +44 (0) 161 924 1600 F. +44 (0) 161 924 1616 E. [email protected] www.farrat.com
All information in this datasheet is for guidance only based on current knowledge and may be subject to change and correction.
CHARACTERISTICS TEST STANDARD PROPERTIES UNIT
Hardness BS ISO 48:2010 N/A IRHD
Density BS EN ISO 845 550 Kg/m3
Tensile Strength BS ISO 37:2011 0.25 N/mm2
Elongation at Break BS ISO 37:2011 60 %
Flammability BS EN 13501-1:2007 Efl , B2 N/A
Compression Set (72HRS @ 23 ºC)
ISO 815-1:2018 6.2 %
CHARACTERISTICS TEST STANDARD PROPERTIES UNIT
Static Compression Modulus, E
c
Varies with load/thickness - see graphs
Dynamic to Static Ratio Determined using in-house test methodology.
Test pad dimensions: 300 x 300mm
2-3 N/A
Damping Ratio, C/Cc @ f
nTBC %
Max Static Pressure [Overload]
0.033 [0.050]
N/mm2
Standard Sheet Size +/-5% 1250x1000 mm
Operating Temperature N/A -30 to +80 ºC
Static Deflection
Natural Frequency
Availability
Typical Lead Times
THICKNESS TREAD (Bottom/Top) STOCK
17 mm Dimpled/Plain Stock
STOCK 2-3 working days
NON-STOCK 2-3 working weeks
BESPOKE 4-6 working weeks
If cutting is required add +5 days
17 mm
Key
Isolation Efficiency (Transmissibility)
Data based on material damping specific, single degree of freedom model. Model applies to all thicknesses.
DATA SHEET AVM-FV71-18a
FAVIM FV71Recycled Rubber/Foam Vibration Isolation Matting
FAVIM FV10
Fig 4.2Fig 4.4Fig 2.2Fig 2.1
FAVIM FV10 FAVIM FV10
Why choose Farrat Favim FV71?Farrat Favim is an environmentally friendly, high performance, durable and economical solution to provide vibration and impact sound insulation.
It is produced from the highest quality recycled rubber with a polyurethane bonding agent in tightly controlled, state of the art manufacturing processes.
Features100% recycled and 100% recyclable
Excellent impact sound insulation and vibration absorption
Operating Loads up to 0.26N/mm2 (260kPa)
Simple and quick installation methods
Excellent long-term resilience
Resistance to moisture absorption and rot
Able to be laid directly onto consolidated hardcore where it can compensate for surface irregularities
Can be supplied as full sheets, cut to size pads and strips (including holes and slots if required) according to the customer's requirements.
ApplicationsFarrat Favim FV71 is used for 'full area' vibration isolation, sound deadening and lateral isolation.
IndustrialFactory and warehouse floor isolationMachine and plant isolated foundations / plinthsLaterally isolated foundations
Buildings and StructuresWall channel isolationAcoustic floating floors (commercial and residential)Light and medium weight partition isolationsHVAC and plant equipment isolationLifts and escalatorsHelicopter landing pads
Farrat Favim FV71 site applications:
Farrat Favim FV71 used as foundation sidewall isolation
Farrat Favim FV71 used to isolate a lightweight partition
Increasing Vibration Isolation Performance
FARRAT FAVIM RANGE:
Increasing Load Bearing Capacity
FV55 FV71 FV75
For more information on using Farrat Favim FV71 (including standard details), please see the following Farrat Technical Brochures:
Applications - Isolation of Lightweight Partitions
Applications - Perimeter Isolation Strips
Available to download at: www.farrat.com
FARRAT FAVIM FV71
FARRAT FAVIM FV71
Farrat Isolevel Ltd Balmoral Road, Altrincham, WA15 8HJ, UKT. +44 (0) 161 924 1600 F. +44 (0) 161 924 1616E. [email protected] www.farrat.com
All information in this datasheet is for guidance only based on current knowledge and may be subject to change and correction.
CHARACTERISTICS TEST STANDARD PROPERTIES UNIT
Hardness BS ISO 48:2010 N/A IRHD
Density BS EN ISO 845 710 Kg/m3
Tensile Strength BS ISO 37:2011 0.35 N/mm2
Elongation at Break BS ISO 37:2011 75 %
Flammability BS EN 13501-1:2007 Efl , B2 N/A
Compression Set (72HRS @ 23 ºC)
ISO 815-1:2018 41 %
CHARACTERISTICS TEST STANDARD PROPERTIES UNIT
Static Compression Modulus, E
c
Varies with load/thickness - see graphs
Dynamic to Static Ratio Determined using in-house test methodology.
Test pad dimensions: 300 x 300mm
2-3 N/A
Damping Ratio, C/Cc @ f
nTBC %
Max Static Pressure [Overload]
0.17 [0.25]
N/mm2
Standard Sheet Size +/-5% 1250x1000 mm
Operating Temperature N/A -30 to +80 ºC
Static Deflection
Natural Frequency
Availability
Typical Lead Times
THICKNESS TREAD (Bottom/Top) STOCK
12.5 mm Plain/Plain Stock
25 mm Plain/Plain Stock
Other up to 50 mm Plain/Plain Bespoke
STOCK 2-3 working days
NON-STOCK 2-3 working weeks
BESPOKE 4-6 working weeks
If cutting is required add +5 days
25 mm
12.5 mm
Key
Isolation Efficiency (Transmissibility)
Data based on material damping specific, single degree of freedom model. Model applies to all thicknesses.
DATA SHEET AVM-FV75-18a
FAVIM FV75Recycled Rubber/Foam Vibration Isolation Matting
FAVIM FV10
Fig 4.2Fig 4.4Fig 2.2Fig 2.1
FAVIM FV10 FAVIM FV10
Why choose Farrat Favim FV75?Farrat Favim is an environmentally friendly, high performance, durable and economical solution to provide vibration and impact sound insulation.
It is produced from the highest quality recycled rubber with a polyurethane bonding agent in tightly controlled, state of the art manufacturing processes.
Features100% recycled and 100% recyclable
Excellent impact sound insulation and vibration absorption
Operating Loads up to 0.80N/mm2 (800kPa)
Simple and quick installation methods
Excellent long-term resilience
Resistance to moisture absorption and rot
Able to be laid directly onto consolidated hardcore where it can compensate for surface irregularities
Can be supplied as full sheets, cut to size pads and strips (including holes and slots if required) according to the customer's requirements.
ApplicationsFarrat Favim FV55 is used for 'full area' vibration isolation, sound deadening and lateral isolation.
IndustrialFactory and warehouse floor isolationMachine and plant isolated foundations / plinthsLaterally isolated foundations
Buildings and StructuresWall channel isolationAcoustic floating floors (commercial and residential)Light and medium weight partition isolationsHVAC and plant equipment isolationLifts and escalatorsHelicopter landing pads
Farrat Favim FV75 site applications:
Farrat Favim FV75 used as foundation sidewall isolation
Farrat Favim FV75 used to isolate a lightweight partition
Increasing Vibration Isolation Performance
FARRAT FAVIM RANGE:
Increasing Load Bearing Capacity
FV55 FV71 FV75
For more information on using Farrat Favim FV75 (including standard details), please see the following Farrat Technical Brochures:
Applications - Isolation of Lightweight Partitions
Applications - Perimeter Isolation Strips
Available to download at: www.farrat.com
FARRAT FAVIM FV75
FARRAT FAVIM FV75
Farrat Isolevel Ltd Balmoral Road, Altrincham, WA15 8HJ, UKT. +44 (0) 161 924 1600 F. +44 (0) 161 924 1616 E. [email protected] www.farrat.com
All information in this datasheet is for guidance only based on current knowledge and may be subject to change and correction.
CHARACTERISTICS TEST STANDARD PROPERTIES UNIT
Hardness BS ISO 48:2010 N/A IRHD
Density BS EN ISO 845 750 Kg/m3
Tensile Strength BS ISO 37:2011 0.50 N/mm2
Elongation at Break BS ISO 37:2011 60 %
Flammability BS EN 13501-1:2007 Efl , B2 N/A
Compression Set (72HRS @ 23 ºC)
ISO 815-1:2018 4.3 %
CHARACTERISTICS TEST STANDARD PROPERTIES UNIT
Static Compression Modulus, E
c
Varies with load/thickness - see graphs
Dynamic to Static Ratio Determined using in-house test methodology.
Test pad dimensions: 300 x 300mm
2-3 N/A
Damping Ratio, C/Cc @ f
nTBC %
Max Static Pressure [Overload]
0.80 [0.53]
N/mm2
Standard Sheet Size +/-5% 1250x1000 mm
Operating Temperature N/A -30 to +80 ºC
Static Deflection
Natural Frequency
Availability
Typical Lead Times
THICKNESS TREAD (Bottom/Top) STOCK
12.5 mm Plain/Plain Stock
25 mm Plain/Plain Stock
Other up to 50 mm Plain/Plain Bespoke
STOCK 2-3 working days
NON-STOCK 2-3 working weeks
BESPOKE 4-6 working weeks
If cutting is required add +5 days
25 mm
12.5 mm
Key
Isolation Efficiency (Transmissibility)
Data based on material damping specific, single degree of freedom model. Model applies to all thicknesses.